Tailored accessories that enhance scale performance and safety
Accessories for scales extend a standard weighing system into a bespoke solution, providing mechanical aids for easy loading and vibration-free support as well as electronic modules for reliable data capture and connectivity. Designed for industrial and laboratory environments, these add-ons—such as weighing pans, platform ramps and antivibration plates—improve ergonomics and protect sensitive components, while Bluetooth modules and printers ensure traceable, automated documentation. By combining hanging fixtures like hooks and shackles with power options such as rechargeable batteries, operators gain both flexibility and continuity of operation.
5-Pack Protective Hood For ABP.100-5M, For Scales - KERN
The lightweight protective hood arrives as a 5‑piece set, compatible with ABP.100‑5M scales and designed for quick replacement to reduce downtime; its compact form keeps storage simple while shielding instruments from dust and contamination. Order the protective hood directly via Metav Werkzeuge or ask our consultants if needed. YBA-A06S05 Protective Hood for ABP.100-5M — 5-piece set by KERN The YBA-A06S05 protective hood is a purpose-made cover for the ABP.100‑5M scale, intended to protect weighing equipment from dust and workplace contamination in industrial and workshop environments Compatibility with ABP.100-5M scales Supplied as a 5-piece set Lightweight, approx. 0.1 kg each Keep production running with fitted protection The KERN YBA-A06S05 arrives as a 5‑piece set, providing immediate spares for service intervals and rapid replacement when contamination occurs. Supplied sets cut the need for frequent reordering and reduce machine downtime, which supports steady workflow and predictable maintenance planning. The compact design and lightweight construction make handling and storage straightforward, enabling quick exchange in busy production areas. Practical handling and hygiene benefits explained Made to shield weighing electronics from dust and debris, this protective cover simplifies routine cleaning and lowers the risk of sensor faults. The scale hood is engineered for straightforward fitting onto the ABP.100‑5M, so maintenance time is shorter and calibration stability is supported. By offering a simple barrier against common contaminants, the accessory prolongs intervals between detailed service tasks and helps preserve measurement reliability. Reliable supply and workshop suitability As an accessory intended for workshop and industrial use, the cover supports operational resilience through ready availability in a multi-pack format. Originating from China and manufactured under the KERN label, the item suits environments where frequent replacement or multiple machines require identical protection. For buyers seeking streamlined procurement and consistent component quality, the multi-pack arrangement is well suited to small workshops and larger facility stock management alike. For reliable dust protection and ready spares, choose the KERN YBA-A06S05 5‑piece protective hood from Metav Werkzeuge — contact our consultants at Metav Werkzeuge for tailored advice. Technical data Article number: YBA-A06S05 Manufacturer: KERN GTIN: 4045761213968 Facts Weight: 0.1 kg Tariff code: 39269097 Origin: CN Special features Compatibility: ABP.100-5M Pack: 5-piece set Category: Scales accessory FAQ Is the hood compatible with the ABP.100-5M only? The YBA-A06S05 protective hood is specified for the ABP.100‑5M; compatibility with other models should be verified against the device dimensions and fastening method. How should the protective hood be cleaned? Cleaning can be performed by wiping the cover with a damp cloth and mild detergent; KERN recommends avoiding aggressive solvents that could affect the material. Does the set include replacement parts for multiple scales? The delivery contains five hoods, allowing immediate replacement across several devices or multiple service cycles for a single instrument. Is the product suitable for harsh industrial environments? The hood provides dust and contamination protection suitable for workshop conditions; for extreme chemical or thermal exposures, consult KERN specifications. What is included in the package? The package contains five protective hoods supplied as a set under SKU YBA-A06S05 by KERN. Metav Werkzeuge, Emmerich am Rhein, Germany • Email: info@metav-werkzeuge.com • Phone: +49 2822 7131930 • WhatsApp: +49 170 2837271
5-Pack Protective Hood for ABS.80-4N, Splash Resistant - KERN
The five-piece set delivers quick, low-cost replacement for scale protection, combining compatibility with ABS.80-4N and a very light weight (0.02 kg per hood) for minimal handling effort; order the ACS-A02S05 directly via Metav Werkzeuge or ask our consultants if needed. KERN ACS-A02S05 protective hood — compatible with ABS.80-4N, 5-piece set ACS-A02S05 is a purpose-made protective hood for ABS.80-4N weighing devices, designed to shield sensitive components from dust and incidental contact in workshop and retail environments Pack of 5 protective hoods Compatible with ABS.80-4N scale Lightweight 0.02 kg per hood Consistent protection that keeps weighing equipment ready The ACS-A02S05 protective hood provides straightforward protection for exposed scale interfaces, helping to prevent dust ingress and accidental impact to control surfaces. By supplying a 5-piece pack, routine replacement becomes a rapid, cost-conscious maintenance step that reduces downtime and preserves measurement reliability. The low individual mass contributes to effortless handling during fitment and storage, while the hood’s compatibility with the ABS.80-4N model ensures a precise match to the device’s form factor. This results in fewer fitting errors and a predictable maintenance routine, which in turn supports uninterrupted production or sales operations. Hygienic handling and easy maintenance for workshop workflows A lightweight protective hood simplifies both application and disposal cycles; handling is faster and less demanding for workshop staff, which improves process efficiency. The practical pack size supports scheduled maintenance intervals and local spares storage, ensuring a replacement is always at hand when a hygiene or wear issue occurs. Clear labelling and a uniform fit reduce the chance of incorrect parts being used on the ABS.80-4N, so the protective measure reliably preserves sensitive electronics and contact points. The result is a pragmatic balance between maintenance economy and continued operational precision. Simple logistics and assured compatibility for procurement Choosing a standardised protective hood available as a set streamlines inventory management and purchasing processes. Supplied as a set of identical units, the item supports consolidated ordering and reduces the number of part variants kept in stock. The pack contents and model compatibility eliminate ambiguity in procurement specifications, making it straightforward to include the hoods in routine consumables lists for laboratories, workshops or retail scales. Origin information and product identifiers further support traceability and stock control within the supply chain. For procurement or technical clarification, contact Metav Werkzeuge in Emmerich — Metav Werkzeuge supplies the ACS-A02S05 and can advise on suitability for workshop routines and ordering options Technical data Article number: ACS-A02S05 Manufacturer: KERN GTIN: 4045761184572 Facts Net weight: 0.02 kg Tariff code: 39269097 eCl@ss: 24322502 Special features Pack contents: 5 pieces Compatible with ABS.80-4N Category: Scales – Accessories Origin: CN FAQ What equipment is this protective hood designed for? The ACS-A02S05 protective hood by KERN is designed specifically for use with the ABS.80-4N scale. How many hoods are included in one delivery unit? The product is supplied as a set of five pieces; the pack contains 5 identical protective hoods. What is the weight of a single hood? Each hood has a net weight of 0.02 kg as stated in the product data. Is the material of the hood specified? Material details are not listed in the available product data for the ACS-A02S05 protective hood by KERN. Can this hood be used with other scale models? Compatibility is confirmed for ABS.80-4N; compatibility with other models is not specified in the provided information. KERN — Origin: China
5-Pack Protective Hood for ABT.100-5NM, Accessory for Scales - KERN
Take advantage of a lightweight protective hood compatible with KERN ABT.100-5NM and supplied as a pack of five to keep weighing stations free from dust and contaminants; simple replacement reduces downtime and supports consistent measurement results. Order directly via Metav Werkzeuge or consult our technical advisers for further details. Protective hood ABT-A02S05 for KERN scales — pack of five, lightweight Protective hood ABT-A02S05 designed as a practical accessory for KERN ABT.100-5NM weighing instruments, offering basic protection in workshop and industrial environments Pack of five protective hoods Compatible with ABT.100-5NM scales Lightweight, 0.02 kg each Rapid dispatch from Metav stock Maintain measurement stability with simple protection A small but effective accessory, the protective hood reduces exposure of the weighing area to airborne particles and incidental splashes that can cause measurement deviations. By limiting contamination, the cover helps to minimise calibration drift and supports reproducible readings in daily operations. Its low mass (approx. 0.02 kg per item) means the hood can be fitted and removed without affecting the balance or requiring recalibration procedures, preserving workflow efficiency. Practical supply and easy replacement to cut downtime Supplied as a pack of five, the accessory provides a ready rotation of replacements for routine use or multi-shift environments. This arrangement simplifies stock planning for workshops and metrology departments and reduces the frequency of procurement cycles. As a dedicated accessory for the KERN ABT.100-5NM family of scales, the hood allows maintenance teams to perform quick swaps during scheduled checks, keeping instruments operational and reducing unplanned interruptions. Designed for workshop hygiene and equipment longevity In environments where dust, fibres or incidental residues are present, a protective cover contributes to a cleaner weighing station and less frequent cleaning of sensitive components. The accessory supports a hygienic workplace and can help extend the service intervals of the instrument by protecting vulnerable surfaces. Manufactured in the Philippines and delivered in compact packs, the product meets the practical needs of production floors and quality-control labs seeking low-effort protection for precision equipment. For reliable protection of KERN scales and straightforward replenishment, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to place an order or request advice. Technical Data SKU: ABT-A02S05 GTIN: 4045761185449 Manufacturer: KERN Origin: PH Facts Net weight: 0.02 kg Commodity code: 39269097 eClass: 24322502 Special features Pack contents: 5 pieces Intended for: ABT.100-5NM scales Category: Scales accessories Product group: Protective hoods FAQ What is included in the ABT-A02S05 package? The ABT-A02S05 is supplied as a pack of five protective hoods intended for use with KERN weighing instruments. Is the hood compatible with my ABT.100-5NM scale? Yes, the protective hood is designed specifically for the KERN ABT.100-5NM model and fits the weighing station as an accessory. Will fitting the hood affect scale accuracy? The lightweight construction (approx. 0.02 kg per hood) is intended to be non-intrusive and should not affect the balance when applied or removed under normal use. Where is the product manufactured? The ABT-A02S05 protective hood is manufactured in the Philippines. Manufacturer: KERN — Origin: PH
5-Pack Protective Hood For CXB Counting Scale, Hygiene Covers - KERN
Take advantage of the combination of precise compatibility with KERN counting scales, a practical five-pack supply and lightweight handling for uninterrupted counting operations — order the protective hoods directly via Metav Werkzeuge or contact our consultants for tailored advice. KERN CXB-A01S05 Protective Hood for CXB Counting Scales — 5-pack, lightweight A KERN CXB-A01S05 protective hood designed to shield CXB counting scales and maintain reliably clean weighing environments in production and inspection areas. Pack of five protective hoods Compatible with KERN CXB counting scales Lightweight and simple to fit Keep counting accuracy intact with targeted protection The primary purpose of this protective hood is to reduce contamination and incidental contact that can affect scale readings on counting equipment. Designed for use with KERN CXB models, the cover supports consistent results by limiting dust and debris accumulation around the weighing chamber. In practical terms, fewer interruptions for cleaning mean smoother throughput and reduced measurement uncertainty for repetitive counting tasks. Quick handling and low-maintenance support for busy benches Supplied as a five-pack, these covers ensure readily available replacements and support multi-station operations without frequent procurement. The low mass (approx. 0.1 kg) makes them effortless to lift and position, while the simple design permits fast fitting and removal during routine checks. Reduced handling time translates into measurable efficiency gains at the point of use and helps maintain production rhythm. Practical choice for assembly lines and inspection stations The compact protective covers are particularly useful where counting scales are used in repetitive batch processes or quality-control checks. By preserving the operational environment of the scale, the covers help sustain measurement repeatability over prolonged runs. Their compatibility with counting-scale models limits the need for custom solutions and supports standardised workplace routines in workshops and light industrial settings. Contact Metav Werkzeuge for application advice or to secure a five-pack supply; our specialists in Emmerich am Rhein will confirm compatibility and delivery options via info@metav-werkzeuge.com or +49 2822 7131930, WhatsApp +49 170 2837271 Technical data SKU: CXB-A01S05 GTIN: 4045761185302 Manufacturer: KERN Country of origin: CN Net weight: 0.1 kg Facts Pack quantity: 5 pieces Commodity code: 39269097 eClass: 24322502 Special features Protective hood for counting scales Compatible with KERN CXB counting scales Supplied as a five-pack Lightweight and easy to handle FAQ Are these covers compatible with all KERN CXB models? The covers are specified for use with KERN CXB counting scales; compatibility should be confirmed against the exact CXB model designation. How many covers are included in one package? Each package contains five protective hoods, providing spares for multiple stations or routine replacement. Can the protective hoods be cleaned on the bench? The hoods can be wiped clean to maintain hygiene and prevent contamination; follow standard workshop cleaning procedures appropriate for the operating environment. Will these covers affect weighing performance? When fitted correctly, the covers minimise external contamination while preserving the intended weighing function of the CXB counting scales. Manufacturer: KERN; Seller: Metav Werkzeuge, Emmerich am Rhein; Contact: info@metav-werkzeuge.com · +49 2822 7131930 · WhatsApp +49 170 2837271
5-Pack Protective Hood For DBS.60-3 Moisture Analyser, Disposable - KERN
Secure consistent operator protection in moisture analysis by combining direct compatibility with KERN DBS moisture analysers, a practical pack of five for rapid replacement, and a lightweight design for easy handling. Order or consult Metav Werkzeuge for tailored advice and reliable supply from Emmerich. Protective hood for DBS.60-3 — 5-piece set by KERN A robust protective hood designed for use with KERN DBS moisture analysers, providing operator protection and contamination control in laboratory and workshop environments. Compatible with KERN DBS moisture analysers Supplied as a 5-piece set Lightweight for easy handling Suitable for laboratory and workshop use Ensure safe moisture determination with targeted operator protection The protective hood offers a clear operational benefit by shielding the operator and the immediate workspace during moisture determination. Designed for use alongside KERN DBS moisture analysers, the hood reduces direct exposure to fumes or particulates generated by the heating process and supports consistent measurement conditions. The compatibility with established moisture analysers ensures that the safety accessory integrates without modification, maintaining the analyser's performance while protecting staff and samples. Keep production moving with a practical pack solution Supplied as a pack of five, the set reduces downtime by allowing quick replacement after contamination or wear. For busy workshops and quality-control labs, having multiple units on hand supports continuous operation and streamlines routine maintenance. The lightweight construction facilitates handling during replacement and storage, while the compact form helps conserve bench space without compromising on protective function. Simple fitting and clear maintenance advantages Installation is straightforward and designed for rapid fitting to the corresponding moisture analyser model, minimising time spent on tool changes. As a disposable or easily cleanable accessory, the hood supports hygienic procedures and simple upkeep, which is particularly valuable in regulated production environments. The accessory's role in preserving measurement integrity is explained in plain terms, helping less technical staff understand how a physical barrier contributes to repeatable results. Trusted sourcing and reliable workshop supply Selecting KERN accessories through Metav Werkzeuge aligns technical quality with dependable logistics. Metav's role as a quality filter for the European market and its stock in Emmerich provide assurance of consistent availability and straightforward procurement for industry and trade. The accessory complements a centralised procurement strategy, supporting the reduction of supplier complexity while maintaining the standards required for precision measurement. Choose the KERN protective hood pack via Metav Werkzeuge for dependable operator protection and immediate workshop readiness—contact the Emmerich team for tailored advice and fast order processing Technical data Article number: DBS-A03S05 Manufacturer: KERN SKU: DBS-A03S05 GTIN: 4045761184701 Country of origin: CN Tariff number: 39269097 Core specifications Weight: 0.05 kg Pack contents: 5 pieces Special features Compatible with moisture analysers KERN DBS Accessory for scales / moisture analysers Category: Accessory (Zubehör) FAQ Is this accessory compatible with all KERN moisture analysers? Compatibility is specified for KERN DBS moisture analysers; the protective hood fits the DBS series and is supplied as SKU DBS-A03S05. How many hoods are included in one delivery unit? The delivery unit contains five hoods, supplied as a pack of five for rapid replacement and stock management. Can the hood be cleaned and reused? The hood is designed for straightforward cleaning or replacement; either option supports hygienic procedures and helps maintain measurement integrity with KERN analysers. Does the hood affect measurement accuracy of the analyser? The hood is intended to protect the operator and immediate workspace while preserving the analyser's operating conditions; correct fitting ensures the analyser's performance is maintained Metav Werkzeuge, Emmerich am Rhein, eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271
5-Pack Protective Hood For FOB, Disposable Lightweight, For Scales - KERN
Take advantage of a compact, compatible solution that combines hygienic protection and simple stock handling; the pack format and low unit weight support efficient workflows. Order directly via Metav Werkzeuge or consult our advisors for tailored delivery options. KERN Protective Hood FOB-A05S05 — Pack of 5, for FOB scales The KERN protective hood for FOB scales offers hygienic coverage for weighing stations and is intended for use where contamination control at the scale interface is required. Pack contains 5 protective hoods Compatible with FOB scale series Lightweight: 0.02 kg each Fast dispatch from Emmerich warehouse Minimise contamination at weighing points with practical hygienic protection The protective cover delivers targeted hygienic protection for scale touchpoints and sample areas, reducing contamination risk during routine weighing operations. The simple, single-layer design ensures a barrier between product and instrument surfaces while preserving access to controls and displays. For industrial metrology and retail weighing environments, this solution supports compliance efforts and helps maintain measurement reliability by keeping sensors and housings free from dust and residues. The combination of low unit weight and compact format makes storage straightforward and reduces logistic overhead. Seamless compatibility with FOB scales for uninterrupted workflows Designed specifically for the FOB range, the cover guarantees a secure fit on the scale housing and around operator-accessible zones, ensuring that instrument function is not compromised. Compatibility with the FOB series simplifies procurement and stocking decisions, since the same accessory can be deployed across multiple units in a workshop or production line. The result is less downtime for equipment preparation and quicker changeovers between tasks, contributing to improved process efficiency and predictable measurement results. Reliable supply format and logistical advantages for workshops and retailers Supplied as a pack of five, the set reduces the frequency of reordering and eases small-batch replenishment for service benches and point-of-sale locations. Each hood is lightweight (0.02 kg), enabling cost-effective transport and compact storage on-site. Shipping is handled from the European distribution centre, supporting dependable delivery times and straightforward stock replenishment. Combined with Metav’s commitment to quality distribution, this accessory helps maintain continuity in daily operations and simplifies vendor management for procurement teams. Contact Metav Werkzeuge for availability, delivery options and technical advice on the KERN protective hood FOB-A05S05; our Emmerich team will assist with stocking and logistics details Technical Data Article number: FOB-A05S05 Manufacturer: KERN SKU: FOB-A05S05 GTIN: 4045761187429 Facts Weight: 0.02 kg Tariff number: 39269097 eClass: 24322502 Special features Pack contains 5 protective hoods Designed for FOB scale series Product group: Scales accessories Country of origin: CN FAQ Are these hoods compatible with FOB scales? Yes. The KERN protective hood FOB-A05S05 is designed for compatibility with the FOB scale series and fits the intended housings without affecting display or controls. How many hoods are included in one delivery unit? The delivery unit contains five protective hoods; the pack format is described as pack of five for convenient replenishment. What is the weight of a single hood? Each protective hood weighs 0.02 kg, allowing compact storage and economical transport. Manufacturer: KERN · Origin: China · Dealer contact: Metav Werkzeuge, Emmerich am Rhein · Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271
5-Pack Protective Hood for FOB-S, For Scales Accessories - KERN
Protective cover for FOB‑S scales that combines hygiene, simple replacement and compact storage; supplied as a five-piece set for fast replenishment. Benefit from a lightweight accessory that reduces downtime and helps maintain measuring accuracy. Order the FOB‑A11S05 directly via Metav Werkzeuge or ask our consultants if needed. FOB-A11S05 protective hood for FOB‑S scales — KERN The FOB-A11S05 is a protective hood for FOB‑S scales, designed to keep weighing equipment clean and shielded in workshop and retail environments. Pack of 5 protective hoods Compatible with FOB‑S scale series Lightweight: 0.08 kg per unit Rapid dispatch from Metav warehouse Keep scales accurate and hygienic with minimal effort The protective hood offers practical protection that prevents dust and light contamination from affecting weighing results. Used as a simple barrier, this accessory helps to maintain measurement accuracy and reduces the frequency of maintenance cycles. For businesses that rely on repeatable weighing — from production benches to checking stations — the cover acts as a cost-effective measure to preserve instrument performance and calibration intervals. Practical handling and fast replacement to reduce downtime Supplied as a pack of five, the set allows straightforward rotation: one hood on the scale, spares ready for immediate replacement. The low individual weight (0.08 kg) makes storage and handling uncomplicated, while the compact format means spare parts take little room in a workshop trolley or service kit. This convenience decreases interruption to processes and supports efficient workflows in busy industrial and commercial environments. Compatibility and supply assurance from a trusted partner Designed as an accessory for the FOB‑S series from KERN, the covers integrate into existing equipment ranges without modification. With Metav’s logistics presence in Emmerich and a broad product portfolio, restocking is straightforward and transparent — especially important for operations that require consistent supply. The combination of established manufacturer compatibility and reliable delivery supports uninterrupted operations and predictable procurement planning. For quick replenishment of scale accessories, rely on KERN quality and order the FOB‑A11S05 via Metav Werkzeuge in Emmerich, or request additional information from our consultants at info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: FOB-A11S05 Manufacturer: KERN GTIN: 4045761184626 Country of origin: CN Scope of delivery: 5 protective hoods Facts Weight: 0.08 kg Tariff number: 39269097 eClass: 24322502 Special features Compatible with FOB‑S scales Accessory for weighing equipment Rapid dispatch available from Metav stock FAQ What is included in the delivery? The delivery comprises a five-piece set of protective hoods (FOB-A11S05), supplied as a single pack. Which scales are these hoods compatible with? The covers are compatible with the FOB‑S series and intended as an accessory for KERN weighing equipment. How heavy is each hood? Each hood has a weight of 0.08 kg. Where is the product manufactured? The product origin is listed as CN (China). Are these hoods suitable for workshop use? Yes, the FOB-A11S05 is designed to provide light protection in workshop and commercial weighing environments. KERN — Manufacturer (origin: CN); For orders and enquiries: Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com, +49 2822 7131930
5-Pack Protective Hood For KXS-TM, For Scales, Quick-Fit, CN - KERN
Benefit from a combination of reliable protection, broad compatibility and straightforward replacement to keep weighing processes uninterrupted; order the accessories directly via Metav Werkzeuge or consult our specialists for further advice. KXS-A07S05 Protective Hood — Pack of 5 for KXS‑TM scales by KERN The KXS-A07S05 protective hood provides a practical cover for workshop and industrial weighing stations, designed to shield KXS‑TM scales from dust and incidental splash while preserving measurement reliability. Pack of 5 for immediate replacement Compatible with KXS‑TM scale models Lightweight design for quick fitting Suitable for workshop and industrial use Preserve measurement accuracy with targeted protection A dedicated protective hood reduces the risk of contamination on the weighing surface and surrounding sensors, helping to maintain consistent results. The hood’s compatibility with KXS‑TM models ensures a correct fit that minimises reset intervals and calibration drift. By preventing dust ingress and incidental splashes, the cover supports uninterrupted operation and reduces the need for frequent cleaning cycles, which in turn contributes to improved process efficiency and fewer production delays. Fast servicing and low operational downtime The cover has been conceived as a simple, replaceable accessory that allows for rapid swapping during routine maintenance. The lightweight construction keeps handling straightforward, while the design avoids time‑consuming fastening procedures. This means less time at the bench for maintenance staff and quicker return to measurement tasks. When integrated into a scheduled maintenance plan, the hood helps to sustain throughput and promotes predictable operational availability. Practical supply and workshop compatibility Delivered as a multi‑unit set, the accessory is tailored for workshops and service departments that require immediate spares on hand. The item’s design is focused on functional protection rather than decorative features, which keeps procurement and inventory management efficient. Where hygienic or controlled environments are in use, the cover acts as an additional barrier that complements established cleaning routines without introducing complex handling requirements. For tailored advice or to secure this KERN protective hood set quickly from Metav Werkzeuge, contact our consultants by email or phone and benefit from local stock and direct supply from Emmerich. Technical Data Article number: KXS-A07S05 Manufacturer: KERN SKU: KXS-A07S05 Facts Net weight: 0.01 kg Tariff code: 39269097 eCl@ss: 24322502 Special features Compatibility: for KXS‑TM scales Pack contents: set, delivery includes five pieces Origin: CN FAQ Is the hood compatible with other KERN models? The KXS-A07S05 hood is specified for KXS‑TM scales; compatibility with other KERN models is not stated and should be confirmed before purchase. What material is the protective hood made of? Material data is not provided for the KXS-A07S05; refer to product documentation or consult Metav Werkzeuge for detailed specifications. Is the cover intended to be disposable or reusable? The KXS-A07S05 is supplied as a replaceable accessory set; reuse depends on contamination level and internal maintenance policies. How is the hood fitted to the weighing instrument? Fitting is straightforward and designed for quick placement on the KXS‑TM housing to restore protection with minimal downtime. Where is the product manufactured? The KXS-A07S05 protective hood is manufactured in China KERN — Origin: China — Tariff code: 39269097
5-Pack Protective Hood For RIB And CIB Scales, Protective Cover - KERN
Choose a practical solution that combines compatibility with KERN RIB and CIB scales, a pack of five spares and uncomplicated replacement to keep measurement processes running smoothly. Order the protective hood directly via Metav Werkzeuge or consult our team for advice. Protective Hood RIB-A01S05 by KERN — Pack of 5, for RIB and CIB scales A Protective Hood RIB-A01S05 designed to protect KERN RIB and CIB scales from dust and incidental contamination in workshop and laboratory environments Pack of 5 protective hoods Compatible with KERN RIB and CIB scales Lightweight accessory, easy storage Simple fit for rapid replacement Preserve measurement accuracy through effective contamination control The protective cover acts as a first line of defence against dust, splash and particulate intrusion, helping to maintain measurement accuracy and reducing the frequency of service interventions. By preventing contaminants from reaching sensitive weighing surfaces and load cells, the hood supports longer calibration intervals and a more reliable production flow. This feature is particularly relevant in busy metrology environments where even small deposits can affect repeatability. Maintain uptime with ready spares and quick replacement Supplied as a pack of 5, the accessory ensures immediate availability of replacements so routine operations are not interrupted. Rapid swap-out of an affected cover is straightforward and designed to be carried out without specialised tools, which contributes to reduced downtime and simpler maintenance planning. Keeping spare hoods on the shelf is a practical, cost-efficient measure to protect precision equipment and streamline workshop logistics. Fit for metrology workflows and professional environments Engineered for compatibility with RIB and CIB scale series, the cover integrates into established weighing setups without modification, preserving the instrument’s operational footprint and handling characteristics. The straightforward design supports consistent handling in production and lab settings and aligns with the demands of quality-conscious workshops. Where product longevity and stable readings matter, this accessory complements the broader KERN metrology offering. For reliable spare covers for KERN devices, request the RIB-A01S05 pack from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to confirm suitability for specific models and arrange delivery Technical Data Article number: RIB-A01S05 Manufacturer: KERN GTIN: 4045761185258 Facts Weight: 0.15 kg Tariff code: 39269097 eCl@ss: 24322502 Origin: CN Special features Pack size: 5 pieces Compatible with RIB and CIB scale models Category: Scales accessories (Waagen Zubehör) Retail description: Protective hood, 5 items included FAQ Which scale models are compatible with these protective hoods? The protective hood is intended for use with KERN RIB and CIB scale series; compatibility is specified for the RIB-A01S05 accessory. How many hoods are supplied with one order? The RIB-A01S05 is supplied as a pack of 5 protective hoods. Will using the hood affect weighing results? The hood is designed to protect the weighing surface; when fitted correctly it preserves measurement accuracy by preventing contamination rather than influencing readings. How simple is it to replace a worn or soiled hood? Replacement is designed to be rapid and requires no specialised tools, supporting fast swap-out and minimal interruption to workflows. KERN — Origin: China; GTIN: 4045761185258; Tariff code: 39269097
5-Pack Protective Hood for RPB, Disposable Lightweight - KERN
Combine hygienic protection, lightweight handling and direct compatibility with RPB systems to maintain uninterrupted weighing operations. Order the KERN protective hood directly via Metav Werkzeuge or consult our specialists for tailored procurement advice. KERN RFC-A02S05 protective hood for RPB — lightweight, compatible accessory The KERN RFC-A02S05 protective hood offers targeted protection for weighing applications, functioning as an accessory for RPB systems to reduce contamination and support reliable measurement results in laboratory and industrial settings. Pack of 5 protective hoods Compatible with RPB weighing systems Lightweight, 0.15 kg total weight Maintain clean processes and reliable readings To keep measurement results consistent and repeatable, a reliable barrier against dust and incidental contamination is essential. This protective hood provides hygienic protection for weighing stations, helping to preserve instrument accuracy and reduce the frequency of cleaning-related downtime. Where trace contamination can affect outcomes, a fitted hood functions as a simple preventive measure that supports process stability and consistent data quality. Quick replacement and minimal handling effort Designed for straightforward handling, the accessory is easy to fit and replace, which speeds routine maintenance and reduces interruptions on the bench. The low package weight contributes to simple storage and replenishment, enabling rapid swaps during shift changes. By shortening maintenance cycles, the hood supports higher operational throughput and contributes to a more efficient workflow around precision scales and balances. Integration into standard weighing workflows As an accessory intended for use with RPB devices, the hood integrates with existing weighing setups without the need for additional adapters. Its purpose is to protect both the instrument and the immediate working environment, supporting cleaner conditions that complement good measurement practice. For workshops and laboratories aiming to streamline procedures, this solution minimises the need for ad hoc protective measures and standardises a clean working routine. Practical considerations for procurement and use This accessory is distributed as a multi-item supply designed to ensure availability when replacements are needed. The compact nature of the kit reduces storage footprint and simplifies inventory management for maintenance teams. While material specifications are not detailed in the product data, the component is presented as a practical accessory from a recognised manufacturer, suitable for routine protective use in weighing and inspection tasks. Secure this KERN accessory through Metav Werkzeuge for dependable spare-part supply and procurement support — contact Metav Werkzeuge via email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for expert assistance and ordering. Technical data SKU: RFC-A02S05 Manufacturer: KERN Country of origin: CN Tariff code: 39269097 ECLASS: 24322502 Weight: 0.15 kg Facts Category: Scales accessory Product group: Protective hoods / work safety covers Suitable for: RPB weighing systems Special features Included: pack of five protective hoods Intended use: protection of weighing devices and operator environment Fast dispatch noted in shop description SKU reference: RFC-A02S05 FAQ What is the primary function of the protective hood? The KERN RFC-A02S05 protective hood is designed to shield weighing stations and the immediate working area from dust and incidental contamination, supporting more stable measurement results. Is the hood compatible with specific weighing systems? Yes, the accessory is listed as compatible with RPB weighing systems and is categorised as a scales accessory for integration into standard setups. How is the product supplied? The item is supplied as a multi-piece pack; the product data specifies inclusion of five protective hoods under SKU RFC-A02S05. What is the weight of the supply? Product data records a total weight of 0.15 kg for the packaged item. Are material and coating details available? Material and coating are not specified in the provided product data for the KERN RFC-A02S05 protective hood; further technical details are not included in the data sheet. KERN — Manufacturer; country of origin: CN
5-Pack Protective Hood Over Keyboard And Housing, For Scales, Washable - KERN
Protect valuable weighing electronics by combining a simple keyboard and housing protective cover with the convenience of a pack format and lightweight handling; order directly via Metav Werkzeuge or consult the specialists for fit and availability. KERN ALJ-A01S05 Protective Cover — durable keyboard and housing protection, pack format The ALJ-A01S05 protective cover is designed to shield scale keyboards and housings in industrial and workshop settings, offering a practical barrier against contamination while preserving device functionality. Protective cover for keyboard and housing Supplied as a pack of 5 pieces Lightweight design at 0.02 kg Suitable for scales and measurement units Reduce maintenance and downtime with straightforward protection The protective cover provides a cost-effective barrier that helps keep keyboards and housings free from dust and light contamination, reducing the need for frequent cleaning and maintenance. By preventing ingress of particles and debris, sensitive components are less likely to require service interruptions, which supports a more efficient production flow. The slim design ensures that the control surfaces remain accessible while receiving reliable coverage, supporting continued measurement accuracy in everyday use. Practical pack format for workshops and multi-unit environments Delivered as a pack of 5, this solution simplifies inventory management for workshops and inspection stations, enabling rapid replacement and consistent protection across several workstations. The compact weight of 0.02 kg per item keeps storage and handling straightforward, while the standard dimensions are suitable for common scale housings. Clear labelling and bulk supply reduce procurement cycles and help maintain uninterrupted operation of weighing equipment. Built for compatibility and simple deployment Manufactured by KERN, the cover is tailored for use over keyboards and housings associated with scales and related measuring devices. The accessory is particularly useful for environments where particulate contamination or incidental spillovers are a concern and where easy-to-change protective elements are preferred. Its design supports quick fitting and disposal or replacement, aligning with routine maintenance practices and operational hygiene requirements. Contact Metav Werkzeuge to secure KERN protective covers (ALJ-A01S05) — our consultants will advise on suitability and ensure prompt dispatch from Emmerich. Technical data Article number: ALJ-A01S05 Manufacturer: KERN SKU: ALJ-A01S05 GTIN: 4045761184589 Origin: China Facts Weight: 0.02 kg Tariff code: 39269097 Special features Pack contents: 5 protective covers Application: protection for keyboards and housings of scales Category: scale accessories FAQ Is the ALJ-A01S05 cover compatible with common scale keyboards? The ALJ-A01S05 protective cover by KERN is designed for use over keyboards and housings typical of scale equipment and offers broad compatibility with standard control surfaces. How is the product supplied and what is included? The product is supplied as a pack of 5 protective covers (ALJ-A01S05), allowing for multiple replacements or coverage across several devices. Can the cover be used in production and laboratory environments? Yes, the KERN protective cover is suitable for industrial and workshop settings where protection of measuring electronics and hygiene are priorities. Does the cover add significant weight or bulk to the device? The cover has a lightweight design at approximately 0.02 kg and is intended to provide protection without impairing access to controls or significantly altering the device profile. Where can information about ordering and availability be obtained? For ordering details and availability of the KERN ALJ-A01S05 protective cover, contact Metav Werkzeuge; consult the product listing or reach out for advice on stock and dispatch. Manufacturer: KERN; Origin: China; Contact: info@metav-werkzeuge.com | +49 2822 7131930
5-Piece Protective Hood for 440-A/N Weighing Platforms 150x170mm, Keyboard and Housing Cover - KERN
Take advantage of a simple, cost-effective solution for protecting scale controls and casing: the covers shield the keyboard and housing while being easy to replace, and they match weighing areas of 150 x 170 mm. Order the protective cover directly via Metav Werkzeuge or consult our specialists if compatibility questions arise. KERN 440-530-002S05 Protective Cover for 440-A/N — fits 150 x 170 mm weighing surfaces, pack solution The KERN 440-530-002S05 protective cover shields the keyboard and housing of compatible 440-series bench scales, designed for everyday workshop environments Pack of five protective covers Protects keyboard and housing Fits 150 x 170 mm weighing surfaces Compatible with KERN 440-A/N scales Minimise downtime with targeted surface protection A lightweight protective cover provides a practical barrier against dust, splashes and incidental contamination, helping to preserve the function of control elements and enclosure surfaces. By shielding the keyboard and housing, the accessory reduces the frequency of intensive cleaning cycles and the risk of service interventions, which supports continuous operation in production and inspection environments. This approach delivers a tangible cost-benefit: fewer interruptions and lower maintenance effort for measuring stations with a 150 x 170 mm weighing area. Streamlined maintenance that keeps processes reliable Replacing a worn cover is a straightforward measure to maintain a hygienic and orderly workstation without complex procedures. The pack format allows scheduled swaps and quicker turnaround in multi-station settings, enabling workshops and labs to standardise protective routines. Metav Werkzeuge’s role as a precision partner ensures that procurement is backed by a quality filter in Emmerich, supplying reliable accessories that align with professional workflows and reduce administrative overhead. Workshop-ready compatibility for controlled environments The design is intended to fit over the control panel and device casing of compatible bench scales commonly used in industrial metrology. Clear specification for a 150 x 170 mm weighing surface helps to match the right cover to the instrument, avoiding ill-fitting solutions that fail to protect sensitive components. The accessory supports consistent measurement conditions by keeping external contaminants away from critical interfaces, thereby contributing to measurement stability and longevity of the instrument. For supply from Emmerich and personalised advice on compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 440-530-002S05 Manufacturer: KERN GTIN: 4045761185395 Country of origin: CN Commodity code: 39269097 Facts Weight: 0.03 kg Suitable for weighing surface: 150 x 170 mm Pack contents: 5 pieces Special features Covers keyboard and housing Accessory for 440-A/N series scales Delivered as a set for regular replacement FAQ Are these covers suitable for repeated use? The KERN 440-530-002S05 protective cover can be reused depending on contamination level and handling; replacement is recommended when integrity or cleanliness is compromised. Which instruments are compatible with this cover? Compatibility is for bench scales in the 440 series with a weighing surface dimension of 150 x 170 mm; the SKU 440-530-002S05 identifies the correct accessory. How does the cover help with maintenance routines? Using the cover reduces direct contamination of the keyboard and housing, lowering the need for deep cleaning and protecting sensitive controls from wear. Does the cover affect measurement accuracy? The cover protects external controls and casing only and does not interfere with the internal weighing mechanism when correctly fitted for 150 x 170 mm models. Is this product supplied by a reputable distributor? The accessory is supplied through established channels and is listed under KERN SKU 440-530-002S05 for traceability and easy reordering. Metav Werkzeuge — Emmerich am Rhein — info@metav-werkzeuge.com — +49 2822 7131930 — WhatsApp +49 170 2837271
5-Set Protective Hood for 572-30, Pack of 5 - KERN
Take advantage of the combination of effortless replacement, precise compatibility and lightweight handling to keep weighing stations operational with minimal downtime. Order the KERN accessory directly via Metav Werkzeuge or ask our consultants for further advice. KERN 572-A02S05 Protective Hood — Compatible with 572-30, lightweight The KERN 572-A02S05 protective hood offers straightforward protection for the 572-30 weighing unit, designed for workshop and industrial environments where reliable accessory supply and easy servicing matter. 5-piece set for immediate replacement Compatible with 572-30 weighing unit Lightweight protective cover, 0.02 kg Minimise downtime with readily available spare covers A 5-piece set of protective hoods supplies immediate spares for routine rotation, reducing interruptions during busy shifts. The compact and lightweight design at 0.02 kg each allows quick handling and replacement without recalibration delays. This translates into measurable time savings on small maintenance tasks and ensures that the weighing equipment remains protected during peak operation periods, supporting continuous workflow efficiency. Tailored protection for precision weighing equipment The protective hood is compatible with the 572-30 weighing unit, providing a precise fit that reduces the risk of contamination affecting measurement accuracy. By preserving the instrument housing during normal use and storage, the hood supports consistent performance and extends service intervals. The accessory from KERN acts as a practical barrier, simplifying workshop routines while maintaining measurement integrity for industrial and trade applications. Practical handling and workshop logistics made simple Supplied as a set, the cover supports straightforward stock management and rapid replacement cycles in production environments. The small footprint and low weight make storage and transport within the workshop easy, while the clear designation as a scale accessory streamlines procurement and spare-part planning. Integration into existing maintenance schedules is uncomplicated, helping to uphold uptime and operational readiness with minimal administrative effort. For reliable supply and compatibility checks of KERN accessories, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange dispatch from our central stock. Technical data Article number: 572-A02S05 Manufacturer: KERN Origin: DE GTIN: 4045761185418 Tariff number: 39269097 Core data Weight: 0.02 kg Set contents: 5 pieces SKU: 572-A02S05 eClass: 24322502 Special features Compatible with 572-30 weighing unit Product category: Scales accessories Product group: Work protection hoods Country of origin: Germany FAQ Is this hood a direct replacement for the 572-30? The KERN 572-A02S05 protective hood is designed specifically for compatibility with the 572-30 weighing unit and serves as a direct accessory for that model. How many covers are supplied with the SKU 572-A02S05? The delivery contains a set of five covers, enabling rotation and quick replacement without interrupting workflows. Can the protective hood be used in a workshop environment? Yes, the hood is intended as a workshop accessory to protect the weighing unit during normal operation and storage, supporting reliable measurement performance. Manufacturer: KERN, Origin: Germany, GTIN: 4045761185418
5-Set Protective Hood For FOB-ML And FOB-NL, For Scales Accessories - KERN
Benefit from a practical combination of broad model compatibility, compact storage and simple replacement: the protective hoods keep weighing equipment free from contamination while reducing downtime through rapid swap-outs. Order the pack conveniently via Metav Werkzeuge or consult our specialists for application advice. Protective Hood FOB-A13S05 (Pack of 5) by KERN — Accessory for FOB-ML / FOB-NL The Protective Hood FOB-A13S05 is a purpose-made cover for FOB-ML and FOB-NL scales, designed to protect displays and housings from dust and light contamination in workshop and industrial environments Five-piece set for immediate replacement Compatible with FOB-ML and FOB-NL models Weight 0.08 kg for minimal bulk Preserve measurement reliability with simple protection The Protective Hood FOB-A13S05 provides a straightforward way to preserve the precision of weighing instruments by acting as a barrier against dust and incidental splashes. Fitted over the relevant housing and display areas, the cover reduces the risk of contamination-related deviations and extends intervals between cleanings, thereby supporting consistent measurement accuracy. As an accessory from KERN, the hood fits established FOB series models and helps maintain production quality without complex procedures. Reduce downtime with a compact, ready-to-stock solution Keeping a small stock of these covers means fast replacement and minimal interruption to daily operations. Supplied as a pack of five, the set is intended to simplify logistics for workshops and service departments: one SKU covers multiple models and replacement cycles. The low weight and compact format support efficient storage and transport, enabling swift replenishment of protective elements and a smoother workflow in scale maintenance and service tasks. Order and specification details for procurement clarity For purchasing and inventory, the item is identified by the SKU FOB-A13S05 and carries a GTIN for system entry. The product is manufactured by KERN and supplied from the established European distribution channel handled by Metav Werkzeuge, which aims to provide reliable availability and transparent order processing from Emmerich. The clear compatibility statement for FOB-ML and FOB-NL reduces uncertainty when selecting spare parts, ensuring procurement contributes directly to operational readiness and equipment longevity. Contact Metav Werkzeuge for supply and suitability information on the KERN protective hood FOB-A13S05 — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss availability and fitment Technical data Article number: FOB-A13S05 Manufacturer: KERN GTIN: 4045761184640 Country of origin: CN Package contents: 5 pieces Weight: 0.08 kg Tariff code: 39269097 eClass: 24322502 Facts Weight 0.08 kg GTIN 4045761184640 Tariff code 39269097 eClass 24322502 Special features Compatible with FOB-ML and FOB-NL Pack of five protective hoods Category: Scales > Accessories Supplied by manufacturer KERN FAQ What is the primary purpose of this protective hood? The protective hood FOB-A13S05 is designed to shield scale displays and housings from dust and light contamination, helping to maintain reliable readings for FOB-ML and FOB-NL instruments. How many covers are included with one article number? One article FOB-A13S05 is supplied as a pack of five protective hoods, intended for quick replacement and reduced downtime. Is the hood suitable for all FOB series models? The cover is specified for use with FOB-ML and FOB-NL models; compatibility with other series should be confirmed against device dimensions or technical documentation. Who manufactures this accessory and how is it identified? The accessory is manufactured by KERN and identified by SKU FOB-A13S05 and GTIN 4045761184640 for procurement and inventory systems. Can these hoods be kept in stock to speed up maintenance? Yes; the five-piece pack and light weight make the hoods convenient to store and deploy as part of routine maintenance spares for weighing equipment. KERN • Origin: China • GTIN: 4045761184640
5-Way Relay Output Module For Precision Scales, Three-Point Tolerance Switching - KERN
Take advantage of precise control, reliable integration and compact design to automate signalling and actuation for weighing processes; order or request integration advice via Metav Werkzeuge for seamless supply and expert support. PES-A02 — KERN relay output module, 5 outputs, 3 tolerance ranges The PES-A02 is a relay output module for integration with KERN PES/PEJ precision scales, providing five control outputs mapped to three weighing tolerance zones for automated signalling and process control Five relay outputs for external control Three tolerance zones for precise switching Designed for KERN PES/PEJ precision scales Compact module, 0.06 kg lightweight build Precise switching for automated production flows The relay outputs on this module translate weight results into deterministic control signals, enabling timed actions such as stopping conveyors, triggering signal lamps or actuating valves. With five outputs assigned to three tolerance zones, the module supports clear acceptance, rejection and warning states; this allows programmable process thresholds and reduces manual intervention. The deterministic switching contributes to reproducible cycle times and consistent product quality, which is particularly relevant where traceability and repeatability are required in industrial weighing operations. Seamless integration with KERN weighing systems Designed specifically for use with KERN PES/PEJ precision scales, the module offers plug-and-play compatibility where the hardware interface is supported at manufacture. Because the module is not retrofittable, it is intended to be specified with new scales or installed where the original equipment includes the necessary interface. This design decision eliminates ambiguity in field upgrades and ensures electrical and protocol compatibility, reducing the risk of installation errors. The compact housing and low mass make it practical for constrained control cabinets or direct panel integration. Clear signals that reduce downtime and inspection effort By converting weighing outcomes into discrete relay states, the module simplifies downstream automation and visual inspection. The clear mapping to three tolerance ranges helps separate marginal results from clear pass/fail conditions, which assists line operators and reduces stoppages for manual checks. Manufactured by KERN with origin in Japan, the module emphasises robust switching behaviour for industrial environments and supports common external devices such as relays, lamps and solenoid valves. The lightweight design and straightforward wiring layout support efficient assembly and predictable serviceability during planned maintenance. Contact Metav Werkzeuge for tailored integration advice on the KERN relay output module PES-A02 — email info@metav-werkzeuge.com or call +49 2822 7131930 for specification matching and order support Technical Data Article number: PES SKU: PES-A02 Manufacturer: KERN GTIN: 4045761078253 Country of origin: JP Facts Outputs: 5 Tolerance zones: 3 Weight: 0.06 kg Tariff number (CN): 90160010 eClass: 19070405 Special features Suitable for use with KERN PES/PEJ precision scales Not retrofittable Enables connection to relays, signal lamps and valves Compact, lightweight module for panel or cabinet mounting FAQ What devices can be driven by the relay outputs of this module? The PES-A02 relay output module from KERN can drive external relays, signal lamps and valves via its five relay contacts, enabling direct actuation or signalling based on weighing results. Is the module compatible with all KERN scales? The module is designed specifically for KERN PES/PEJ precision scales; compatibility with other models is not guaranteed and should be confirmed before ordering. Can the relay output module be added to an existing scale in the field? The PES-A02 is not retrofittable; it is intended to be specified as part of systems that support the interface at the point of manufacture or initial configuration. How are the tolerance zones used in practice? The three tolerance zones provide discrete thresholds for pass, reject and warning states; mapping these to the five outputs allows flexible control logic for automated sorting or process interlocks. Manufacturer: KERN — Origin: Japan — further contact information not provided
5.5 kg Hook With Safety Latch For Crane Scale, Galvanised And Painted Cast Steel - KERN
Take advantage of secure load handling and robust construction combined with simple fitment for faster weighing cycles; order directly via Metav Werkzeuge or consult our specialists for application advice. YHA-04 Hook with safety latch — Hook accessory for KERN crane scales, galvanised cast steel The YHA-04 Hook with safety latch is a heavy-duty hook designed for crane scales, combining a positive-lock safety latch with a galvanised, painted cast-steel body for reliable load attachment in industrial weighing applications Safety latch for secure load handling Galvanised, painted cast-steel construction Includes 2 shackles and connecting bolt Compatible with HFA 10T-3 and HFC 10T-3 Secure connection that supports accurate weighing The hook provides a mechanically positive safety latch, reducing the risk of accidental disengagement during lifting and thereby helping to maintain consistent weighing conditions. The latch mechanism is designed to keep suspended loads stable while the scale records, which supports reliable measurement results and reduces rework. The robust galvanised cast-steel body resists deformation under regular workshop stresses, ensuring the attachment point remains true and does not introduce error into the weighing system. Ready-to-fit accessory to minimise downtime Delivered complete with 2 shackles and a painted screw bolt, the accessory is configured for immediate installation on compatible crane scales. The YHA-04 is specified for models with a weighing range >5 t and listed compatibility includes HFA 10T-3 and HFC 10T-3, allowing maintenance teams to replace worn lifting hardware quickly and resume operations with minimal delay. The supplied components remove the need to source separate connectors, shortening procurement cycles and simplifying inventory. Built for longevity and dependable workshop use The painted finish on the galvanised casting provides a protective layer that lowers corrosion risk in demanding industrial environments, contributing to a longer service life and fewer unscheduled replacements. At 5.5 kg, the assembly balances mass and manoeuvrability for routine fitting and inspection. Being manufactured in Germany adds a further layer of traceability and quality assurance, which is valuable for workshops that prioritise consistent performance and compliance with internal inspection regimes. Contact Metav Werkzeuge for tailored advice on the KERN YHA-04 hook and secure delivery from our Emmerich warehouse to your workshop Technical Data Article number: YHA-04 Manufacturer: KERN SKU: YHA-04 GTIN: 4045761197190 Data Weight: 5.5 kg Tariff number: 84239010 Origin: DE Suitable for weighing range: >5 t Special features Safety latch Material: galvanised, painted cast steel Includes: 2 shackles, 1 painted screw bolt, 1 hook Compatible with: HFA 10T-3, HFC 10T-3 FAQ Is this hook compatible with existing KERN crane scales? The YHA-04 hook is specified as compatible with KERN models HFA 10T-3 and HFC 10T-3 and is intended for use on scales with a weighing range greater than 5 t. What components are included with the hook? Delivery for the KERN YHA-04 includes two shackles, one painted screw bolt and the hook itself, ready for assembly. How does the safety latch improve operational safety? The safety latch on the YHA-04 prevents unintentional release of the load during lifting, supporting stable weighing and reducing the likelihood of accidents. Is the hook suitable for outdoor or corrosive environments? The hook is made from galvanised, painted cast steel, which provides enhanced resistance to corrosion compared with bare steel, improving suitability for harsh workshop conditions. How often should the hook assembly be inspected? Regular visual and functional inspections are recommended; check the KERN YHA-04 for wear on the latch and shackles and ensure fastenings remain secure as part of routine maintenance. Manufacturer: KERN; Address: not specified; Contact: not specified
5.9kg Accessory For CR.2000-3PI Stainless Steel - KERN
Take advantage of the accessory's precise fit and stainless steel construction to ensure reliable integration with existing weighing systems; order directly via Metav Werkzeuge or consult the specialists for compatibility and delivery. Accessory for CR.2000-3PI — KERN weighing accessory in stainless steel, ready for scale integration This Accessory for CR.2000-3PI is designed to serve as a robust, maintenance-friendly component for professional weighing setups in industrial and laboratory environments. Compatible with CR.2000-3PI scale models Robust stainless steel construction Prepared for secure workshop mounting Built for reliable scale integration Engineered for straightforward incorporation into established weighing installations, this accessory guarantees precise alignment and repeatable performance when paired with the CR.2000-3PI family of scales. The design focuses on mechanical compatibility and ease of installation to reduce setup time and minimise calibration adjustments. By prioritising exact interfacing, the component supports continuous measurement workflows and contributes to lower process variability in routine weighing tasks. Compatibility and fit are central to system uptime and operational efficiency. Durability that keeps operations moving Constructed from stainless steel, the accessory provides a corrosion-resistant surface that withstands humid or industrial atmospheres and simplifies cleaning procedures. With a listed mass of 5.9 kg, the component offers the mechanical stability required for consistent weighing results and reduced susceptibility to vibration. The selected material and solid construction extend service intervals and limit the need for replacement parts, thereby lowering long-term maintenance efforts and supporting uninterrupted production sequences. Streamlined supply and practical workshop use As a dedicated weighing accessory from KERN, the item is intended to offer quick identification, traceability and integration into inventory systems. The clear specification supports rapid procurement and planning within purchasing processes, while the robust finish ensures compatibility across diverse operational environments. Sourcing through Metav adds the advantage of consolidated supply management and direct delivery from Emmerich, backed by an extensive product range that simplifies acquisitions for workshops and industry partners. For purchasing guidance or compatibility confirmation for the KERN stainless steel accessory CE.P244021, contact Metav Werkzeuge for a tailored supply recommendation and delivery details. Technical data Article number: CE.P244021 GTIN: 4045761231313 Brand: KERN Category: Accessory (weighing accessories) Facts Weight: 5.9 kg Tariff code: 84239010 eCl@ss: 21131725 Features Material: stainless steel Compatible with CR.2000-3PI Origin: CN Category path: Scales › Accessories FAQ Is this accessory compatible with CR.2000-3PI scales? The accessory for CR.2000-3PI (KERN CE.P244021) is specified for direct compatibility with the CR.2000-3PI model range, ensuring correct mechanical interfacing. What material is used and is it suitable for harsh environments? This KERN accessory is made from stainless steel, providing a corrosion-resistant finish suitable for many industrial and laboratory conditions. How heavy is the component and what does the weight imply? The component weighs 5.9 kg; the mass contributes to mechanical stability and consistent weighing performance under typical workshop conditions. Can the accessory be mounted on existing installations without modification? The component is designed for straightforward mounting with CR.2000-3PI systems; mounting details should be verified against the specific scale configuration to confirm fit. Where is the accessory manufactured and how is it identified? Manufactured in CN and identifiable by GTIN 4045761231313 and article number CE.P244021, the accessory is listed under KERN weighing accessories for traceability. Manufacturer/Responsible: KERN & SOHN GmbH, Ziegelei 1, 72336 Balingen-Frommern, Germany, info@kern-sohn.com
505x405x130 mm Roller Conveyor Attachment For Platform Scale, Conductive Ball-Bearing Galvanised Rollers - KERN
Benefit from a rapid conveyor-to-scale conversion with a robust aluminium profile frame and galvanised, ball-bearing rollers for reliable weighing in production and shipping lines; order the KERN YRO-02 via Metav Werkzeuge or consult the Metav advisors for tailor-made settings. KERN YRO-02 roller conveyor attachment — aluminium profile frame, galvanised ball-bearing rollers The KERN YRO-02 is a roller conveyor attachment that converts a platform scale into a robust weighing station for production and shipping applications. Easy conversion for platform scales Robust aluminium profile frame Galvanised, ball-bearing steel rollers Suitable for dry environments Faster, integrated weighing on conveyor lines The roller conveyor attachment turns a standard platform scale into a flexible weighing station, enabling parcels or goods to be weighed while passing over the scale or at fixed positions. This integration reduces manual handling and speeds up throughput in production and dispatch areas, helping to maintain a smooth material flow. The attachment supports longitudinal direction operation for inline processing and is particularly useful where time efficiency directly affects operational costs. Built for durability and simple upkeep A strong aluminium profile frame forms the backbone of the unit, while the galvanised, ball-bearing steel rollers ensure low-friction movement and long service life. The rollers are conductive, which assists in dissipating static during handling. The design is modular, allowing easy disassembly for cleaning or replacement of individual components, so maintenance is straightforward and downtime is minimised. With compact dimensions of 505 x 405 x 130 mm and a unit weight of 8.4 kg, the module combines robustness with manageable handling for installation and servicing. Adaptable to existing scales and production demands The attachment is designed for simple plug-on installation to common platform models such as IFB, IFS, KFP, KXP and SXS, delivered as one roller conveyor attachment (scale not included). The modular concept permits customised adaptation of preload and switch-on tolerances to match specific weighing requirements. As part of Metav Werkzeuge’s offering, the unit benefits from a trusted supply chain based in Emmerich, providing a reliable route from order to the workshop bench and allowing individual configuration where needed. For a tailored conversion of existing platform scales, request a customised adaptation for the KERN YRO-02 from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for detailed specifications and an individual offer Technical data Article number: YRO-02 Manufacturer: KERN GTIN: 4045761190283 Dimensions: 505x405x130 mm Weight: 8.4 kg Country of origin: DE Tariff number: 84239010 Core specifications Weight: 8.4 kg Dimensions (L x W x H): 505 x 405 x 130 mm Materials & features Material: aluminium profile frame Rollers: galvanised, ball-bearing steel, conductive Direction of travel: longitudinal Suitable environment: dry Modular design: removable for cleaning/replacement Compatible with platform scales: IFB, IFS, KFP, KXP, SXS Delivery: 1 roller conveyor attachment (without scale) FAQ How is the roller conveyor attached to an existing platform scale? The roller conveyor attachment is designed to be plugged onto compatible platform scales such as IFB, IFS, KFP, KXP and SXS; the unit is supplied as a single attachment (scale not included). Can the conveyor attachment be cleaned or serviced easily? Yes, the modular construction allows the frame and rollers to be disassembled so individual components can be cleaned or replaced without full unit removal. What materials can be handled on the roller conveyor? The attachment is suitable for standard goods and packages passing on a dry conveyor line; the galvanised, ball-bearing rollers provide smooth movement for a wide range of items. Is the attachment suitable for use in environments with static-sensitive goods? The rollers are conductive, which helps to reduce static accumulation during handling; consult Metav Werkzeuge for specific ESD requirements and adjustments. Does the delivery include a scale? No, delivery comprises one roller conveyor attachment only; the module is intended for use with an existing platform scale. Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930
50h Internal Battery Pack For Load Cells Rechargeable NiMH, 12h Charge Time - KERN
Take advantage of the combination of reliable NiMH power, long runtime and compact weight to keep weighing systems running without interruption; order the HCD-A01 directly via Metav Werkzeuge or consult our advisors for compatibility and fast dispatch. HCD-A01 internal battery for load cells (NiMH) — KERN The HCD-A01 internal battery is a compact NiMH power unit intended to supply load cells and weighing electronics during portable or stationary measurement tasks. Internal NiMH power for load cells Up to 50 h runtime without backlight 12 h recharge time Lightweight: 0.16 kg Reliable power for weighing electronics that reduces downtime The unit uses NiMH chemistry to provide up to 50 h of operation without backlight, ensuring extended measurement cycles between charges. With a standard 12 h charging period, the design balances convenient recharge intervals with stable output for sensitive electronics. This arrangement reduces unexpected production stops and supports continuous inspection or weighing tasks, providing an efficient and predictable power supply for metrology equipment. Compact, serviceable design optimised for load‑cell applications Built specifically for load‑cell and weighing applications, the internal battery supplies stable voltage to analogue and digital weighing modules. A load cell converts force into electrical signals; a dependable power source prevents measurement drift and supports repeatable results. The battery’s 0.16 kg mass contributes to a low overall system weight, aiding portability in field checks and mobile test rigs while minimising mechanical load on instrument housings. Practical maintenance and dependable supply from a precision partner Maintenance is straightforward due to the battery’s proven chemistry and clear charge interval; routine charging keeps the unit ready for use without complex service procedures. Metav’s position as a precision partner brings further assurance: decades of technical experience, a stock range exceeding 250,000 products and an Emmerich‑based quality filter offer reliable availability and consistent product standards. This combination supports workshop uptime and simplifies procurement for industrial buyers. For availability, compatibility checks or purchasing advice on the HCD-A01, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930; WhatsApp +49 170 2837271 for quick enquiries Technical data SKU: HCD-A01 GTIN: 4045761218222 Manufacturer: KERN Origin country: CN Tariff number: 85075000 Core specifications Weight: 0.16 kg Charging time: 12 h Battery runtime: up to 50 h without backlight ECLASS: 21059207 Special features Internal battery for load cells NiMH chemistry Accessory category: Scales / Batteries Article group: Batteries / Accumulators FAQ What type of battery chemistry does this unit use? The HCD-A01 uses NiMH cell chemistry, selected for stable output and proven cycle behaviour in weighing applications. How long will the battery run between charges? Under typical conditions the unit provides up to 50 h of operation without backlight before recharging is required. How long does a full recharge take? A full recharge requires approximately 12 h under standard charging conditions. Is the battery suitable for portable scale use? Yes; the HCD-A01 is designed for load‑cell and weighing electronics and is lightweight at 0.16 kg, supporting portable setups. Who supplies and supports this product? Metav Werkzeuge supplies the HCD-A01 and can advise on compatibility with specific scale models and measurement systems. Metav Werkzeuge GmbH, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com · Tel: +49 2822 7131930 · WhatsApp: +49 170 2837271
50h Rechargeable Internal Battery Up to 50 h Runtime, 12 h Charge Time - KERN
Benefit from extended mobile operation with a WTB-A01N internal rechargeable battery pack that delivers up to 50 h of continuous use and recharges in approximately 12 h; the compact 0.68 kg design reduces installation impact and supports uninterrupted weighing tasks. Order the internal battery pack directly via Metav Werkzeuge or ask our consultants if technical clarification is required. WTB-A01N internal rechargeable battery pack by KERN — up to 50 h runtime, 12 h charge time the WTB-A01N is an internal rechargeable battery pack for KERN scales, engineered to provide extended mobile operation for laboratory and industrial weighing applications Up to 50 h operating time Approx. 12 h charge time Internal rechargeable battery pack Compact design, only 0.68 kg Longer running cycles for uninterrupted weighing The internal rechargeable battery offers a significant extension of mobile operating time, with a runtime of up to 50 h under conditions without backlighting. This extended autonomy reduces interruptions during prolonged measurement tasks and minimises dependence on mains power, which is particularly useful for inspection rounds, off-site checks and production sampling. The described runtime is a practical indicator for shift planning and contributes directly to process reliability and throughput. Predictable recharge time to support shift planning With a standard charge time of around 12 h, the unit enables predictable scheduling for recharging cycles and maintenance windows. The defined charging behaviour means power management can be integrated into existing workflows without unexpected downtime. Where backlight use is required, the available operating time will be reduced accordingly; this cause-and-effect relationship should be considered when planning continuous operation in illuminated-display scenarios. Compact design and installation-friendly weight Weighing only 0.68 kg, the pack is compact and designed for internal installation in compatible weighing instruments. Its modest mass minimises mechanical stress on housings and simplifies handling during service interventions. As an accessory from KERN, the battery pack is specified for use with matching scale models and is supplied as a factory-aligned power solution to maintain measurement stability and certified performance. Practical advantages for procurement and production Choosing an internally mounted rechargeable power source reduces the number of external cables and external battery carriers, contributing to a tidier workstation and fewer intervention points. The technical characteristics support a rational decision-making process focused on operational continuity and maintenance simplicity. For professional workshops and industrial environments that require robust weighing uptime, the pack represents a targeted upgrade to existing KERN weighing equipment. Contact Metav Werkzeuge in Emmerich for compatibility checks, further technical data or purchasing support via info@metav-werkzeuge.com, by phone on +49 2822 7131930 or WhatsApp at +49 170 2837271 Technical data Article number: WTB-A01N Manufacturer: KERN GTIN: 4045761146457 Commodity code: 85072080 Country of origin: CN Numbers Weight: 0.68 kg Charge time: 12 h Operating time: up to 50 h (without backlight) eClass: 21059207 Special features Internal rechargeable battery pack Designed for use with KERN weighing instruments Compact, installation-friendly format FAQ Is this battery compatible with KERN scales? The WTB-A01N is specified as an internal rechargeable battery pack for KERN weighing instruments (SKU WTB-A01N) and is intended for use with compatible KERN models. How long does the battery take to recharge fully? A full recharge requires approximately 12 hours under standard charging conditions specified for the WTB-A01N. What operating time can be expected during typical use? Operating time is stated as up to 50 hours without backlight; using the display backlight will shorten the runtime proportionally. How heavy is the battery and does it affect installation? The unit weighs 0.68 kg, a compact mass that minimises installation impact and simplifies handling during maintenance. Metav Werkzeuge, Emmerich am Rhein, eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271
50mm Stand For IXS Models Compatible With 300x240x86mm To 650x500x133.5mm Platforms - KERN
Take advantage of the combination of compact 50 mm profile, broad platform compatibility and easy handling thanks to its 1.8 kg net weight; ensure stable positioning for shop-floor and laboratory weighing tasks. Order the stand directly via Metav Werkzeuge or consult our product specialists for specification matching. IXS-A01 Stand for KERN scales — 50 mm low profile, workshop compatible A IXS-A01 stand engineered to provide a low, stable support platform for weighing equipment, intended for integration with compatible weighing plates and accessories in industrial and laboratory settings Low 50 mm profile for compact setups Compatible with weighing plates 300×240–650×500 mm Lightweight 1.8 kg for simple handling Manufactured by KERN Space-saving stability for everyday weighing tasks A low-profile support contributes directly to consistent measuring conditions by reducing unnecessary elevation and producing a predictable support plane. The 50 mm height keeps the instrument close to the bench, which minimises centre-of-gravity shifts and eases access during routine operations. This compact design supports efficient workflows in environments where bench space is at a premium and repeated placement is required, translating into fewer interruptions and more reliable measurement cycles. Broad compatibility eases equipment planning and integration Designed to accept weighing plates with dimensions from 300×240×86 mm up to 650×500×133.5 mm, the stand simplifies equipment selection by covering a wide range of platform sizes. This compatibility reduces the need for custom adapters and helps standardise installations across multiple workstations. The stand’s 1.8 kg construction balances portability with sufficient mass for stable positioning, making it suitable for both fixed benches and mobile test setups where quick reconfiguration is needed. Proven manufacturer quality and practical procurement Supplied by KERN, the stand benefits from established production and quality control processes; identification is available via GTIN: 4045761199736 and SKU IXS-A01 for straightforward ordering and inventory management. Choosing components that fit existing platforms reduces installation time and inventory complexity. Metav Werkzeuge’s proximity and quality-filtered stock ensure reliable delivery and support, helping maintain uninterrupted metrology operations across workshops and service centres. Contact Metav Werkzeuge for tailored compatibility checks and secure supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for concise technical advice and order facilitation Technical data Manufacturer: KERN SKU: IXS-A01 GTIN: 4045761199736 Origin: CN Commodity code: 73269098 Facts Height: 50 mm Weight: 1.8 kg Compatible plate sizes: 300×240×86 mm – 650×500×133.5 mm ECLASS: 21170601 Special features Accessory for scales and weighing systems Designed for integration with a range of weighing platforms Compact footprint for bench-top use FAQ What weighing plate sizes are supported by the stand? The stand supports weighing plates with dimensions from 300×240×86 mm up to 650×500×133.5 mm, ensuring flexible use with many common platforms. Is the stand heavy enough to provide stable support? With a net weight of 1.8 kg, the IXS-A01 stand provides a practical balance of portability and stability for routine weighing setups. Who manufactures the stand and how can it be identified? The product is manufactured by KERN and can be identified by SKU IXS-A01 and GTIN 4045761199736 for ordering and inventory purposes. Can the stand be used in laboratory and workshop environments? Yes; the low 50 mm profile and compact footprint make it suitable for both laboratory benches and industrial workshop workstations. Where can procurement advice be obtained for matching the stand to existing equipment? Metav Werkzeuge offers specification guidance and compatibility checks to help match the stand to existing weighing platforms and systems. Manufacturer: KERN — Origin: CN — GTIN: 4045761199736
565×450×60 mm Anti-Vibration Granite Platform, Polished Granite on Rubber Mounts, 42 kg Ready-to-Ship - KERN
Take advantage of precise measurement results through robust vibration damping and a heavy, polished granite surface that stabilises sensitive instruments; compact dimensions and hygienic surfaces support ergonomic use in space-constrained labs. Order the antivibration plate directly via Metav Werkzeuge or contact our consultants for tailored advice and fast dispatch. KERN YPS-05 Antivibration Plate — Polished granite, 565×450×60 mm The KERN YPS-05 is an antivibration plate designed to isolate analytical balances and microscopes from vibrations, providing a stable working surface for high-precision measurements Polished granite on resilient rubber supports Suitable for analytical balances and microscopes Compact footprint 565×450×60 mm Hygiene-friendly, easy-to-clean surfaces Reduce measurement errors with a stable work surface High-precision weighing and optical inspection require a stable base to prevent fluctuating results. The KERN YPS-05 combines mass and material to provide effective vibration damping: the dense polished granite top increases inertia, while the support system attenuates external shocks. This construction reduces measurement scatter and the need for repeat tests, which improves throughput and ensures repeatable results for both routine and traceable analytical tasks. The described behaviour of the platform is particularly relevant when using analytical balances, where even small vibrations can affect the displayed value. Compact footprint that supports ergonomic workflows A small laboratory bench or a crowded workshop does not need to compromise on measurement quality. With overall dimensions of 565×450×60 mm, the plate fits tight workspaces while allowing ergonomic operation either standing or seated. The top surface is finished for cleanliness: hygienic surfaces are easy to wipe down and maintain, supporting contamination control in sensitive environments. The low-profile design enables comfortable access to instruments and ancillary equipment and is tailored to accommodate KERN precision instruments and microscopes with corresponding base sizes. Robust build and ready logistics for uninterrupted operation Durability is central to a long service life and consistent performance. The YPS-05 rests on absorbing rubber elements that decouple the granite slab from bench vibrations and protect the platform from transmitted shocks. This arrangement creates a dependable working surface that preserves instrument calibration and extends operational uptime. For operational planning, the unit is shipping ready in 2 days and delivered palletised, reducing lead times and simplifying installation. The combination of a heavy top and resilient supports yields a stable base that lowers the frequency of adjustments and supports efficient lab routines. For reliable vibration control choose the KERN YPS-05 and contact Metav Werkzeuge in Emmerich for expert advice and prompt palletised dispatch Technical Data Article number: YPS-05 SKU: YPS-05 Manufacturer: KERN GTIN: 4045761253568 Dimensions: 565×450×60 mm Material: Polished granite Origin: DE Commodity code: 84239010 ECLASS: 21170605 Facts Dimensions: 565×450×60 mm Net weight: approx. 42 kg Shipping: ready in 2 days Commodity code: 84239010 ECLASS: 21170605 Special features Material: polished granite Mounted on absorbing rubber elements Hygienic, easy-to-clean surfaces Ergonomic use standing or sitting Suitable for KERN analytical and precision balances and microscopes with corresponding dimensions Shipping: palletised FAQ Is the antivibration plate compatible with analytical balances? The KERN YPS-05 antivibration plate is designed for use with KERN analytical balances and precision scales that fit the platform dimensions; it reduces external vibrations and stabilises weighing results. What are the exact dimensions and weight of the plate? The platform measures 565×450×60 mm and has a net weight of approximately 42 kg, giving sufficient mass for effective vibration isolation. Can the plate be used for microscopes and optical inspection? Yes, the antivibration plate is suitable for microscopes and other optical instruments, providing a vibration-reduced surface for clearer imaging and more consistent observations. How should the polished granite surface be cleaned and maintained? Polished granite on the antivibration plate is easy to maintain; clean with a mild detergent and soft cloth, avoid harsh abrasives, and check the rubber supports periodically for secure seating. Manufacturer: KERN; Dealer: Metav Werkzeuge, Emmerich am Rhein; Email: info@metav-werkzeuge.com; Phone: +49 2822 7131930; WhatsApp: +49 170 2837271
57mm Matrix Dot Impact Printer 1.8 L/S 40 Char Per Line, EU Power Adapter - KERN
Take advantage of a compact, reliable printing solution with dot matrix technology, fast line throughput and a universal 100–230 V plug-in power supply for seamless integration into weighing and lab setups. Order the unit directly via Metav Werkzeuge or contact our consultants for compatibility advice. Matrix dot matrix printer – compact receipt printer with 40-character line and 57 mm paper width (KERN) Matrix dot matrix printer provides robust, low-maintenance printing for scales and laboratory equipment, ideal for roll receipts and simple data output. Dot matrix printing technology 40 characters per line capacity 57 mm paper roll width Compact dimensions 100×180×106 mm Robust printing for continuous workflows This compact unit uses dot matrix technology to deliver legible receipts and logs where longevity and tamper-evident printing matter. With a throughput of 1.8 lines/s, the mechanism is optimised for frequent, short receipts typical in weighing and goods-in processes. The device is housed in plastic for lightness and portability while retaining a solid build for routine industrial use. The clear line length of 40 characters allows predictable layout for numeric results, timestamps and identifiers, reducing post-print formatting on labels or folders. Simple integration with scales and peripherals Designed as an accessory for scale and measurement systems, the printer accepts a standard 57 mm paper roll and runs from a 100–230 V plug-in power supply with an EU adapter included. Interface cabling is not supplied, enabling integrators to select the most suitable connection for each installation; this choice supports flexible system topologies and avoids redundant cable types. The unit’s compact footprint (100×180×106 mm) and light weight (0.75 kg) facilitate mounting near workbenches or inside housings without significant space or load implications. Clear purpose, low-maintenance operation The mechanism’s straightforward design focuses on reliability and easy upkeep: consumables are limited to ribbon and thermal-stable paper, and the dot-matrix head tolerates intermittent operation and varied print loads. Originating from Japan, the product reflects consistent manufacturing quality and is particularly suited for environments where long-term availability and predictable output are priorities. Its supported print format and mechanical durability make the device a practical choice for repetitive documentation tasks in production, logistics and laboratory settings. For precise printing alongside KERN weighing equipment, contact Metav Werkzeuge in Emmerich for tailored advice and to confirm system compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 911 SKU: 911-013 Manufacturer: KERN GTIN: 4045761016408 Origin: JP ECLASS: 19140105 Facts Dimensions: 100 × 180 × 106 mm Weight: 0.75 kg Printable characters per line: 40 Paper roll width: 57 mm Print speed: 1.8 lines/s Input voltage: 100 V – 230 V Special features Printing method: dot matrix Material: plastic Power supply: plug-in power supply (EU adapter included) Interface cable: not included Commodity code: 84239010 FAQ What printing method does the unit use and for which tasks is it suited? The unit uses dot matrix printing, ideal for durable receipts and basic logs in weighing, dispatch and lab documentation where lasting legibility and low running costs are required. Is the power supply included and what voltage range is supported? A plug-in power supply with an EU adapter is included; the device supports an input range of 100–230 V, enabling operation across common mains standards. Does the printer come with connection cables for scales? The printer is supplied without interface cables so that system integrators can select the correct connector type for each scale or controller. Can the device be mounted on or near a bench without special supports? Yes. With compact dimensions of 100×180×106 mm and a weight of 0.75 kg, the unit is suitable for bench-top placement or enclosed mounting with basic fixation. Which manufacturers and systems is the printer intended to complement? The printer is supplied by KERN and is designed for integration with weighing and measurement equipment commonly used in industrial and laboratory settings. KERN, Origin: JP, GTIN: 4045761016408
57mm Receipt Paper Roll 55mm Diameter 26m Length 10-Pack - KERN
Take advantage of the combination of printer compatibility, consistent print quality and extended roll length for uninterrupted documentation; order the paper rolls directly via Metav Werkzeuge or ask our consultants if needed Paper rolls 911-013-010 — Paper rolls for KERN printers, 57 mm width The Paper rolls 911-013-010 are standard printer rolls intended for use with compatible KERN printing devices, offering reliable media handling for weighing and receipt applications Compatible with KERN 911-013 printer 57 mm paper width for standard receipts 26 m roll length for prolonged use 55 mm roll diameter fits common holders Efficient documentation with reliable media These printer rolls deliver a dependable media format that supports clear and legible printing for weighing and labelling workflows. With a 57 mm paper width and a 26 m length per roll, the design reduces the frequency of media changes and helps maintain continuous operation in busy environments. The specified roll diameter 55 mm ensures compatibility with common printer holders, which maintains consistent paper feed and minimises jamming. This focus on operational efficiency supports predictable process throughput and reduces administrative interruptions. Less downtime, easier stock planning Longer roll length and industry-standard dimensions translate into fewer interruptions for replenishment and a simplified inventory approach. The consistent media format supports predictable consumption rates, aiding logistics and ordering cycles. Where traceability and continuous print output are required, these rolls contribute to sustained print runs and lower handling time for staff. The compatibility with KERN devices further ensures straightforward replacement without adjustments to printer settings, improving overall workflow reliability. Quality sourcing and dependable supply Sourced with a clear origin in Germany, these paper rolls are part of a supply chain that benefits from Metav Werkzeuge’s role as a quality filter for the European market. Metav’s established presence in Emmerich combines a broad product range with transparent fulfilment processes, which supports uninterrupted provision of consumables for industrial and trade customers. The combination of standardised dimensions and dependable sourcing underpins both operational continuity and procurement confidence for businesses that rely on consistent print output and stock replenishment. Contact Metav Werkzeuge to secure KERN-compatible paper supplies and ensure continuous operation from our Emmerich warehouse — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 911-013-010 Manufacturer: KERN SKU: 911-013-010 GTIN: 4045761127135 Facts Paper width: 57 mm Roll diameter: 55 mm Roll length: 26 m Weight: 1.2 kg Tariff number: 84239010 Special features Compatible with KERN 911-013 printer Pack contents: 10 pieces Product category: Waagen › Zubehör eClass: 24260490 Origin: DE FAQ What printers are these rolls compatible with? The paper rolls 911-013-010 are specified for compatibility with KERN printing units, explicitly matching the KERN 911-013 model and similar devices designed for 57 mm media. What are the key dimensions of the rolls? Dimensions for the 911-013-010 rolls include a 57 mm paper width, 55 mm roll diameter and a roll length of 26 m, suited to standard receipt and weighing printer holders. How do these rolls affect printer downtime? By providing a longer roll length and standard dimensions, the 911-013-010 paper rolls reduce changeovers and help maintain consistent print runs, contributing to lower downtime in continuous operations. Can these rolls be stored easily in workshops? Yes; the 911-013-010 rolls use a common format that supports compact storage and straightforward rotation, aiding inventory management in workshop and industrial settings. Where do these paper rolls come from? The 911-013-010 paper rolls originate from Germany and are distributed via Metav Werkzeuge’s logistics, which focuses on reliable supply for industrial consumables. Manufacturer: KERN — Address: Germany — Contact: not provided
Tailor weighing accessories to your workflow
Accessories for weighing systems turn a standard scale into a purpose-built tool for lab, industrial or retail use. Termed here as accessories, also described as scale add-ons or weighing attachments, the range covers both mechanical and electronic extensions that adapt scales to specific processes and handling needs.
Why these accessories matter in practice
They provide functional upgrades that improve accuracy, safety and data integrity. Mechanical parts such as ramps, trays and protective hoods reduce handling time and protect sensitive components, while electronic modules enable reliable data capture and system integration. In operations where repeatable documentation or mobile use is required, the right scale accessories are indispensable for consistent workflow performance.
Concrete advantages that save time and reduce risk
- Enhanced process reliability through interface converters and printers for automated data logging
- Improved ergonomics and loading speed via ramps and roller conveyors
- Reduced measurement disturbance with anti-vibration plates and pit frames
- Expanded use cases supported by hooks and shackles for hanging weighing and batteries for mobile operation
- Better hygiene and durability from protective hoods and rubber mats that shield the weighing electronics
Why Metav is the sensible partner for scale accessories
Metav stands for democratisation of precision and acts as a quality filter for the European market from Emmerich. With over 48,000 customers and a portfolio exceeding 250,000 products, Metav combines specialist know-how with broad availability so procurement teams can centralise suppliers without compromising on reliability. Choose Metav for consistent product quality, dependable supply and practical expertise in matching the right accessories to industrial requirements.
In short
Scale accessories increase the functional scope of a weighing system, optimising ergonomics, data flow and protection for sustained operation.
Technical overview
- mechanical add-ons: trays, ramps, roller conveyors, protective hoods, rubber mats
- stability components: anti-vibration plates, pit frames
- hanging weighing: hooks, shackles
- electronic modules: Bluetooth sets, printers, interface converters
- power and connectivity: batteries, data cables, converters
- operator aids: foot switches, loading ramps
FAQ
What compatibility should I check before selecting scale accessories?
Check the scale model and its available interfaces; many accessories require standard data ports or specific mounting footprints. The accessories range includes interface converters and data cables to bridge common differences between devices.
Can accessories improve measurement repeatability in an industrial environment?
Yes. Components such as anti-vibration plates and pit frames reduce external disturbances, while secure trays and ramps ensure consistent loading—both of which improve repeatability for weighing applications.
Are there mobility options among the accessories for mobile weighing tasks?
Batteries and portable mounting options turn stationary scales into mobile solutions. For mobile data capture, Bluetooth sets and compact printers are common scale add-ons.
How do accessories support quality assurance and traceability?
Printers, interface converters and data cables enable direct documentation and integration with quality systems, ensuring weight data is recorded and traceable for audits and process control.
Which accessories enhance operator safety and ergonomics?
Ramps, roller conveyors and foot switches reduce manual lifting and handling, while protective hoods and rubber mats protect both operator and equipment during routine use.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com