Tailored accessories that enhance scale performance and safety
Accessories for scales extend a standard weighing system into a bespoke solution, providing mechanical aids for easy loading and vibration-free support as well as electronic modules for reliable data capture and connectivity. Designed for industrial and laboratory environments, these add-ons—such as weighing pans, platform ramps and antivibration plates—improve ergonomics and protect sensitive components, while Bluetooth modules and printers ensure traceable, automated documentation. By combining hanging fixtures like hooks and shackles with power options such as rechargeable batteries, operators gain both flexibility and continuity of operation.
58/70/76mm Dot-Matrix Receipt Printer For Scales Fast 4.7 Lps, Auto Cutter, EURO Adapter - KERN
Take advantage of fast, reliable printing together with plain‑paper archiving and an automatic cutter for streamlined weighing documentation; order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. YKG-01 dot‑matrix printer by KERN — 4.7 lines/s, automatic cutter The YKG-01 is a compact dot‑matrix printer for retail, hospitality and kitchen environments, designed to print weighing results on plain paper for reliable, long‑term archiving. Fast dot‑matrix print at 4.7 lines/s Prints weighing values on plain paper Built‑in automatic paper cutter Interchangeable interface, cable not included Dependable output for retail and catering operations The unit delivers consistent impact printing that is optimised for the frequent, short receipts typical in shops and kitchens. With a rated speed of 4.7 lines/s and a maximum of 42 characters per line, the mechanism ensures legible, evenly spaced output that suits both immediate transaction needs and longer‑term record keeping. Using plain paper instead of thermal rolls reduces running costs and enables simple archival procedures, while the printer’s robust construction resists the knocks and humidity common in catering environments. Simple integration and low‑effort maintenance Engineered for straightforward connection in point‑of‑sale setups, the model provides an interchangeable interface to match existing systems; note that the interface cable is not included. The supplied EU power adapter supports 230 V AC, 50 Hz supplies, and the plug‑in power design keeps replacement simple. Routine consumable changes are fast: the design allows easy paper and ribbon replacement without specialised tools, reducing downtime and keeping staff focused on service rather than maintenance. Archive‑ready receipts and controlled operating range Because the printer produces records on plain paper, documents withstand longer storage and are compatible with conventional filing systems. The integrated automatic paper cutter gives a clean finish to each slip, improving handling and reducing errors when collecting multiple receipts. For reliable use, the device is specified for operation between 5 °C and 35 °C, and its compact footprint suits busy counters and compact kitchen stations, contributing to an orderly, compliant documentation workflow. Contact Metav Werkzeuge for an expert recommendation on integrating the KERN YKG‑01 into the workflow and to arrange supply directly from our Emmerich warehouse – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: YKG SKU: YKG-01 Manufacturer: KERN Origin: JP GTIN: 4045761253056 Facts Dimensions: 160 x 248 x 139 mm Weight: 2.71 kg Print speed: 4.7 lines/s Max characters per line: 42 Power input: 230 V AC, 50 Hz Paper widths: 58, 70, 76 mm Operating temperature: 5 °C–35 °C Special features Printing method: impact (dot‑matrix) Power supply: EURO plug‑in adapter Built‑in automatic paper cutter Interchangeable interface (cable not included) Designed for plain‑paper receipt archiving FAQ How does the YKG‑01 handle receipt archiving? The KERN YKG‑01 prints on plain paper, producing durable receipts suitable for standard filing and longer retention periods. Is an interface cable included with the printer? No, the printer is supplied with an interchangeable interface but the interface cable is not included and must be provided separately. What power supply is required for the unit? The unit uses a 230 V AC, 50 Hz supply and is shipped with a EURO plug‑in adapter. Can the printer be used in a kitchen environment? Yes, the design and impact printing method make it suitable for retail and catering settings; operating conditions should remain within 5 °C–35 °C. What makes this model suitable for point‑of‑sale systems? Its compact size, fast 4.7 lines/s output, automatic paper cutter and interchangeable interface facilitate simple integration into POS workflows. Metav Werkzeuge — Emmerich (warehouse and quality hub); Contact: info@metav-werkzeuge.com; Tel: +49 2822 7131930; WhatsApp: +49 170 2837271
5pcs Protective Hood for FOB-NS, Accessory for Scales - KERN
Reliable protection in a compact, lightweight set: the KERN protective hood FOB-A12S05 delivers workshop-ready shielding and compatibility with FOB‑NS indicators while keeping spare covers simple to stock—order directly via Metav Werkzeuge or consult our specialists for specification checks. Protective Hood FOB-A12S05 — KERN, pack of 5 for FOB‑NS Protective Hood FOB-A12S05 is a lightweight accessory designed to shield FOB‑NS weighing indicators from dust and incidental spills in industrial and workshop environments. Pack of five protective hoods Compatible with FOB‑NS indicators Lightweight design (0.08 kg) Fast dispatch from Emmerich warehouse Extend instrument life with dependable shielding The protective hood is a practical, economy‑minded solution that reduces particulate ingress and the risk of accidental splashes on sensitive weighing electronics. By preventing contamination of control surfaces and connectors, the accessory lowers maintenance frequency and helps avoid costly calibration downtime. Compatibility with FOB‑NS indicators ensures a precise fit; the compact profile and lightweight construction mean minimal additional load on storage and handling systems. Streamline workshop logistics with spare coverage Supplied as a pack of five, the set is designed for routine replacement and efficient workshop stocking. Multiple covers allow staggered changeover without interrupting measurement workflows, supporting continuous operation in production or quality control. The small bulk and low weight support consolidated procurement processes, reducing administrative overhead while maintaining readiness. Metav’s distribution from Emmerich provides a reliable channel for replenishment and inventory planning. Practical handling and ordering clarity for procurement The hood is positioned as an accessory within the scales product group, enabling clear categorisation in purchasing systems and spare‑parts lists. Identification via SKU and GTIN simplifies ordering and inventory control: use the SKU when reordering to ensure the correct accessory. The design supports quick exchange and minimal adjustment time, which keeps throughput steady in busy measurement stations and reduces overall process disruption. Order KERN protective hood FOB-A12S05 through Metav Werkzeuge for dependable spare covers shipped from Emmerich—reach our consultants via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: FOB-A12S05 Manufacturer: KERN SKU: FOB-A12S05 GTIN: 4045761184633 Facts Weight: 0.08 kg Commodity code: 39269097 Pack contents: 5 pieces Special features Compatibility: FOB‑NS indicators Product group: Accessories for scales Category path: Waagen > Zubehör Origin: CN FAQ What does the protective hood protect against? The KERN protective hood FOB‑A12S05 shields weighing indicator surfaces and connectors from dust and incidental splashes, reducing contamination and maintenance needs. Is the hood compatible with my FOB‑NS indicator? Yes, the accessory is specified for compatibility with FOB‑NS indicators; reference the SKU FOB‑A12S05 when ordering to ensure the correct fit. How is the product supplied for workshop use? The item is supplied as a pack of five protective hoods, allowing scheduled replacement and simplified stock management for continuous operation. How can the hood be identified for procurement? Use the SKU FOB‑A12S05 or the GTIN 4045761184633 to identify the exact accessory in ordering and inventory systems. KERN — Origin: CN — Contact via Metav Werkzeuge: info@metav-werkzeuge.com · +49 2822 7131930
5T Hook With Safety Latch, Zinc‑Plated Painted Ductile Iron, Incl. Shackles & Bolt - KERN
Take advantage of a secure lift connection and robust corrosion protection to keep weighing operations reliable. The combination of a safety latch, galvanised and painted cast steel construction and delivered rigging components ensures quick fitting and sustained service life — order the hook directly via Metav Werkzeuge or consult our advisers for suitability. YHA-03 hook with safety latch for crane scales (Galvanised cast steel) — KERN A YHA-03 hook with safety latch designed for crane scales, suited to systems with a 5 tonne capacity Safety latch for secure load retention Galvanised and painted cast steel construction Includes 2 shackles and one connecting link Compatible with HFA 5T-3 and HFC 5T-3 Safer lifts with an integrated safety latch The primary function of this crane hook is to provide a secure connection between load and scale. Fitted with a positive safety latch, the device minimises the risk of accidental disengagement during handling and transport. For weighing tasks in busy workshops and production lines, the latch contributes to predictable load retention and fewer interruptions to workflow, translating into more consistent measuring results and operational efficiency. Robust materials for long service life Constructed from galvanised and painted cast steel, the hook resists corrosion and wear in industrial environments. This surface treatment offers corrosion resistance that reduces maintenance intervals and extends usable life compared with untreated fittings. At a handling weight of 2 kg, the component balances sturdiness with manageable handling during installation and inspection, supporting routine maintenance without heavy-lift equipment. Delivered ready with essential rigging hardware The scope of delivery includes essential rigging parts so that the hook can be fitted quickly to the weighing assembly. Supplied components such as shackles and a connecting link allow immediate integration into standard crane-scale assemblies, saving set-up time and avoiding separate procurement steps. The pre-configured nature of the kit supports fast commissioning and reduces the chance of mismatched parts affecting measurement integrity. Designed for industrial weighing systems and compatibility Engineered for use with crane-scale systems in the five-tonne class, compatibility is specified for models including HFA 5T-3 and HFC 5T-3. The hook is suitable where reliable load attachment is required for routine weighing and material handling. Its design matches the needs of production, logistics and workshop environments that demand robust, repeatable lifting connections for accurate and safe weighing operations. Contact Metav Werkzeuge to secure KERN’s YHA-03 hook for corrosion-resistant, safety-latched lifting; our Emmerich team is available at info@metav-werkzeuge.com or +49 2822 7131930 to advise on suitability and delivery Technical data Article number: YHA-03 Manufacturer: KERN GTIN: 4045761193079 SKU: YHA Country of origin: DE Weight: 2 kg Material: galvanised and painted cast steel HS code: 84239010 Facts Weighing range compatibility: 5 tonne Weight: 2 kg Special features Safety latch Galvanised and painted cast steel Includes 2 shackles Includes 1 connecting link Compatible with HFA 5T-3 Compatible with HFC 5T-3 FAQ What load range is the hook intended for? The hook is intended for crane-scale systems in the 5 tonne class; compatibility is specified for models with a five-tonne weighing range such as the HFA 5T-3 and HFC 5T-3. What material and surface protection are used? The KERN YHA-03 hook is made from cast steel with galvanised and painted surface protection to improve corrosion resistance and durability in industrial settings. What is included in the delivery of the hook? Delivery of the YHA-03 hook includes rigging components: two shackles and one connecting link to enable direct assembly into a compatible crane-scale installation. Can the hook be used with other crane scales? Compatibility with other crane scales depends on the fitting dimensions and rated capacities; the YHA-03 is designed for five-tonne systems, so mechanical and rating checks are recommended before use. How does the safety latch improve daily operation? The safety latch on the YHA-03 reduces the risk of accidental load release during lifting and weighing, supporting safer handling and fewer operational interruptions. KERN, Germany, Contact not provided
5‑Pack 118mm/170x140mm Protective Cover For EW/EG Weighing Plates, For Scales - KERN
Take advantage of the combination of precise fit for KERN EW/EG models, easy replacement through a pack of five, and reliable dust and splash protection to keep workshop scales ready for use — order or request advice via Metav Werkzeuge if clarification is required. Protective cover for EW and EG scales (KERN) — fits Ø118 mm & 170×140 mm weighing pans, pack of 5 The Protective cover for EW and EG scales provides a lightweight dust and splash shield for weighing pans sized Ø118 mm and 170×140 mm, ensuring clearer results and reduced cleaning effort in busy workshop environments. Pack of five protective covers Fits Ø118 mm and 170×140 mm weighing pans Compatible with KERN EW and EG series Preserve calibration and reduce rework with simple protection A small investment in a protective cover yields clear operational benefits: by shielding the weighing pans from dust, spills and particulate contamination the interval between maintenance tasks is extended and measurement drift is reduced. The form-fit compatibility with common pan sizes means no compromise to measurement geometry, preserving precision and repeatability for labelling, dosing and quality-control tasks. Streamline workshop routines and limit downtime Supplied as a pack of five, the set supports fast swap-out routines and inventory control in production or quality departments. Lightweight and easy to place, the covers enable quick cleaning cycles and minimise handling of sensitive surfaces. The clear specification for pan diameters removes uncertainty when replenishing consumables, helping to maintain throughput and avoid avoidable stoppages. Dependable supply chain and trusted partners for industry use Made by KERN and shipped from our central stock, the accessory is part of a broader offering aimed at affordable, dependable measurement solutions. Metav Werkzeuge combines decades of expertise with a broad catalogue to help reduce supplier complexity; this protective accessory fits into that approach by delivering reliable consumables that support consistent output and traceable workflows. For tailored advice on model compatibility or to request this KERN protective cover pack through Metav Werkzeuge from our Emmerich warehouse, contact our consultants for fast, expert guidance Technical data Article number: EG-A05S05 SKU: EG-A05S05 Manufacturer: KERN GTIN: 4045761185494 Facts Weight: 0.02 kg Suitable for weighing pan sizes: Ø118 mm; 170×140 mm Tariff number: 39269097 Special features Pack contents: 5 covers Compatible with KERN EW and EG series Category: Scales / Accessories FAQ Are these covers compatible with other scale models? Compatibility is specified for KERN EW and EG series and for pans sized Ø118 mm and 170×140 mm; compatibility with other models depends on pan dimensions and is confirmed by the SKU EG-A05S05. What is included in the delivery? Delivery comprises a set of five protective covers as stated in the product description and packing list. How should the covers be cleaned? Covers can be wiped clean with a soft cloth and mild detergent; avoid aggressive solvents and abrasive tools to preserve the fit and surface finish. Do the covers protect against liquids or only dust? The covers provide dust and light splash protection to reduce contamination; they are not intended as a substitute for full waterproofing or immersion protection. KERN — Japan — contact details not provided
5‑Piece Protective Cover For PNS.600‑3 Keyboard And Housing - KERN
For reliable, low-effort protection of sensitive scale controls, choose the lightweight KERN PNJ-A01S05 protective cover: supplied as a five-piece set and made to shield the keyboard and housing of the PNS.600-3 — order directly via Metav Werkzeuge or consult our specialists for fit and logistics. PNJ-A01S05 Protective Cover for PNS.600-3 — KERN, pack of 5 A PNJ-A01S05 protective cover designed for the KERN PNS.600-3, providing targeted protection for keyboard and housing in workshop and laboratory settings Protective cover for keyboard and housing Compatible with PNS.600-3 scales Supplied as a set of 5 Lightweight: approx. 0.02 kg each Reduce downtime with targeted component protection The protective cover is engineered to sit over the keyboard and housing, preventing ingress of dust and light contaminants that can cause wear or require frequent cleaning. Supplied as a pack of 5, the set supports routine replacement cycles and spare provisioning, which promotes continuity of operation. For workshop managers seeking measurable benefits, the accessory offers a straightforward way to lower maintenance intervals and preserve the functional integrity of weighing equipment without complex retrofitting. Practical supply and simple stock management for workshops Delivered in a multi-piece set, this accessory simplifies procurement for production floors and service teams. The five-piece configuration allows rotation between devices and ensures replacements are available when needed; this supports efficient inventory control and reduces ad hoc downtime. Availability through Metav Werkzeuge benefits from centralised logistics and a broad product range, enabling rapid restocking and consistent supply for scale accessory needs. Easy handling and clear compatibility for everyday use Compatibility with the PNS.600-3 scale series is specified, enabling immediate deployment on matching units. At approximately 0.02 kg per item, the cover is lightweight and easy to fit, so fitment requires minimal handling time and no special tools. The result is reliable protection with negligible impact on workflow, providing workshop staff with practical peace of mind and a simple method to protect sensitive control interfaces during routine operations. Secure a ready supply of KERN PNJ-A01S05 protective covers via Metav Werkzeuge for consistent workshop protection — enquiries and order details available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: PNJ-A01S05 Manufacturer: KERN GTIN: 4045761185470 Country of origin: CN Core facts Weight: 0.02 kg Commodity code: 39269097 ECLASS: 24322502 Pack quantity: 5 pieces Special features Protection for keyboard and housing Compatible with PNS.600-3 scales Product category: Scales accessory — protective covers Category path: Waagen › Zubehör FAQ Is this cover compatible with the PNS.600-3 scale series? Yes. The PNJ-A01S05 protective cover is specified for use with the PNS.600-3 range and fits the keyboard and housing configuration of that model. How many covers are supplied in one set? The product is supplied as a set of five covers, allowing for immediate replacements and simple stock rotation. What protection does the cover provide? The cover protects the keyboard and housing from dust and light contamination, reducing the need for frequent cleaning and helping to maintain normal operation. What is the weight of each cover? Each PNJ-A01S05 protective cover weighs approximately 0.02 kg, making it easy to handle and fit during routine maintenance. Manufacturer: KERN — Country of origin: CN
6 kg Accessory for CR-Q1 Stainless Steel - KERN
Benefit from the robust stainless steel construction and compact 6 kg design that ensure long-term durability as an accessory for CR‑Q1 precision scales. Order the CE.RQ42901 accessory directly via Metav Werkzeuge or ask our consultants if needed. CE.RQ42901 accessory for CR‑Q1 by KERN — stainless steel, 6 kg A robust CE.RQ42901 accessory designed to extend the functionality of the KERN CR‑Q1 precision scale in workshop and laboratory environments. Stainless-steel construction for corrosion resistance Compatible accessory for KERN CR‑Q1 scales Compact 6 kg weight for easy handling Built for long-term workshop performance The accessory is manufactured from stainless steel, delivering consistent corrosion resistance and mechanical stability in demanding environments. High-quality material selection reduces the risk of surface wear and contamination, which supports reliable measurement routines over time. The solid 6 kg construction provides a stable mounting base that minimises vibration transfer and contributes to repeatable readings on precision balances. For workshops and inspection benches that require dependable hardware, the combination of robust material and substantial mass translates directly into fewer interruptions and a lower need for frequent replacements. Seamless compatibility with KERN CR‑Q1 scales Designed specifically as an add-on for the KERN CR‑Q1 line, the accessory ensures straightforward integration with existing metrology equipment. Clear mechanical interfaces and matching load characteristics preserve the original instrument’s accuracy, meaning measurement uncertainty is not introduced by ill-fitting components. The match to the manufacturer’s specifications supports efficient setup and reduces calibration adjustments after installation. As a component engineered for precision scales, it assists technicians in maintaining traceable measurement conditions without added complexity. Practical benefits that support efficient workflows Beyond material and fit, the product contributes to operational efficiency through low-maintenance design and ease of handling. The stainless-steel surface is simple to clean and resists common workshop contaminants, supporting hygienic conditions where required. Its robust construction reduces the frequency of replacements, improving overall uptime for measurement stations. For operations focused on productivity and repeatable results, this accessory represents a durable extension that conserves maintenance resources while upholding precision standards. Contact Metav Werkzeuge in Emmerich to discuss the suitability of the KERN CE.RQ42901 stainless-steel accessory for CR‑Q1 scales and to arrange supply directly from our central warehouse. Technical data SKU: CE.RQ42901 Manufacturer: KERN Material: stainless steel Weight: 6 kg eClass: 21131725 Facts Mass: 6 kg Classification: 21131725 Special features Accessory for CR‑Q1 scales Corrosion-resistant stainless-steel construction Suitable for workshop and laboratory use FAQ What is this accessory intended for? This accessory is intended to extend the functionality of KERN CR‑Q1 precision scales and to provide a durable mounting or interface option for related measurement tasks. Is the CE.RQ42901 compatible with all CR‑Q1 models? The CE.RQ42901 was developed for use with the KERN CR‑Q1 series; compatibility should be confirmed against the specific CR‑Q1 variant in use to ensure correct fit and performance. What material is used and how does it benefit accuracy? Made from stainless steel, the accessory offers corrosion resistance and dimensional stability, which helps maintain consistent measurement conditions and supports accurate results on precision scales. How heavy is the accessory and what does the weight mean in practice? The accessory weighs 6 kg; this mass contributes to a stable platform that reduces external disturbance and helps preserve repeatable measurements in a workshop setting. Does the accessory require special maintenance? Routine cleaning of the stainless-steel surfaces and periodic visual inspection are sufficient; the robust construction minimises the need for specialised maintenance. Metav Werkzeuge, Emmerich am Rhein — eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271
6 V 1.2 Ah Rechargeable Internal Battery, Up to 20h Runtime - KERN
Reliable internal power for weighing instruments with a compact lead‑acid design: 6 V / 1.2 Ah capacity and up to 20 h runtime without backlight, plus a standard 12 h recharge cycle and a lightweight 0.3 kg housing for straightforward installation. Order directly via Metav Werkzeuge or consult our advisers for compatibility and procurement guidance. KFB-A01 Internal rechargeable battery (6 V, 1.2 Ah) by KERN The KFB-A01 is an internal lead‑acid rechargeable battery designed as a power supply for precision scales and weighing modules, providing extended portable operation and reliable backup power in workshop and industrial environments. Internal rechargeable lead-acid battery 6 V 1.2 Ah Runtime up to 20 h without backlight Charging time 12 h for full readiness Compact weight 0.3 kg for simple installation Long operating time for uninterrupted weighing processes The internal rechargeable module delivers a clear operational advantage for mobile or battery‑dependent weighing equipment: with 6 V and 1.2 Ah nominal capacity, the cell supports continuous use up to 20 h without backlight, reducing interruptions in measurement cycles and minimising downtime. For businesses that rely on accurate, reproducible weighing—such as small production lines, incoming goods inspection and mobile service units—this extended runtime translates into fewer recharges and more stable workflows. The lead‑acid (Pb) chemistry offers predictable discharge behaviour, which simplifies run‑time planning in daily operation. Simple integration and predictable recharging Charging behaviour and installation are designed for straightforward integration into existing instruments. The battery reaches full charge in 12 h, allowing overnight replenishment during non‑productive hours and predictable readiness for the next shift. At 0.3 kg, the unit is light enough for compact housings while remaining robust for workshop conditions; the modest mass also eases handling during maintenance or replacement. The compact format and internal mounting reduce the need for external adapters and help maintain the original instrument footprint, preserving ergonomics and transportability. Reliability, compatibility and operational benefits Manufactured by KERN, this power module is tailored for weighing accessories and support applications where dependable backup power is essential. The rechargeable battery functions as an internal power source, ensuring that calibration routines and data logging are not disrupted by mains interruptions or temporary field assignments. For operators with mixed fleets of scales, the standardised electrical values facilitate compatibility checks and spare‑parts management. The combination of consistent discharge, recognised chemistry and compact design supports a predictable maintenance rhythm and contributes to long‑term process reliability Specify the KFB-A01 when ordering through Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for procurement advice and technical matching Technical data Article number: KFB-A01 Manufacturer: KERN GTIN: 4045761113848 Country of origin: CN Weight: 0.3 kg Charging time: 12 h Runtime: up to 20 h without backlight Tariff number: 85072080 eClass: 21059207 Core specifications Voltage: 6 V Capacity: 1.2 Ah Weight: 0.3 kg Charging time: 12 h Runtime: up to 20 h without backlight Features & compatibility Type: Pb lead‑acid internal power supply Category: Accessories for scales SKU: KFB-A01 Manufacturer: KERN Origin: CN FAQ What is the expected runtime under normal use? The KFB-A01 offers a runtime of up to 20 h without backlight; actual duration depends on instrument power consumption and usage patterns. Which battery chemistry is used and what does it mean for maintenance? The module uses a lead‑acid (Pb) chemistry, which provides predictable discharge curves and simple maintenance handling compared with more complex chemistries. How long does the battery take to fully recharge? Charging to full capacity takes 12 h under standard charging conditions, making overnight cycles practical for regular operation. Is the unit suitable as a permanent replacement for mains power? The battery is intended as an internal rechargeable power source and backup for scales; long‑term continuous mains replacement is not the primary application. Can the module be integrated into different scale models? The KFB-A01 is designed as an accessory for weighing equipment; compatibility should be confirmed against instrument electrical specifications and mounting provisions. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271
600mm Stand For IP-Protected Platform Scale, For SFE Models - KERN
For ergonomic indicator positioning and straightforward integration with KERN SFE platform scales, the compact 600 mm elevation offers stable support while remaining lightweight at approx. 1.4 kg; ideal for workshop workflows that require clear readings at eye level. Order the KERN SFE-A03 stand directly via Metav Werkzeuge or ask our consultants if needed. KERN SFE-A03 stand – 600 mm elevation for SFE platform scales A KERN SFE-A03 stand designed to raise the evaluating unit of compatible platform scales, providing ergonomic access and tidy bench organisation for industrial and trade environments Height approx. 600 mm For KERN SFE IP-protected platform scales Lightweight design, approx. 1.4 kg Easier readings and improved workflow through ergonomic elevation Raising the scale indicator to a working height of approx. 600 mm reduces repetitive bending and visual strain, which helps maintain efficient cycle times and steadier inspection routines. The compact elevation places the display at eye level so operators can read values quickly and maintain a continuous production flow. By integrating a dedicated mount rather than improvising with boxes or clamps, the workstation remains organised and measurement errors due to awkward viewing angles are minimised. The compatibility with IP-protected platform systems ensures that the elevated indicator can be positioned without compromising the scale’s intended installation. Portable, practical support that fits busy workshops Weighing approx. 1.4 kg, this mounting solution combines stability with portability, allowing it to be repositioned around the bench or taken between workstations as needed. The modest mass contributes to straightforward handling during routine changes of layout while the design maintains a secure platform for the evaluating unit. For applications where flexibility is important—inspection tables, quality control benches or temporary set-ups—the lightweight construction reduces downtime when adapting the measurement area. The result is reliable support that suits both permanent and ad-hoc weighing arrangements. Seamless integration with KERN SFE platform scales for dependable operation Specifically matched to KERN SFE platform systems, the stand is intended for use with platforms measuring 500 × 400 × 140 mm and 650 × 500 × 140 mm and with IP-protected configurations. The term IP-protected indicates that the associated scale platforms have an ingress-protection specification that guards against dust and moisture; using a dedicated stand preserves the intended mounting geometry and helps maintain the instrument’s environmental protection. Where compact footprint and compatibility matter, this mount simplifies installation and reduces the need for custom adaptors or additional fixtures. Speak with Metav Werkzeuge in Emmerich for a tailored recommendation on the KERN SFE-A03 stand and how it fits existing weighing equipment – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SFE-A03 Manufacturer: KERN GTIN: 4045761151383 Country of origin: CN Core measurements Height: approx. 600 mm Weight: approx. 1.4 kg Tariff code: 73269098 eCl@ss: 21170601 Compatibility and features Suitable for platform sizes 500 × 400 × 140 mm and 650 × 500 × 140 mm Compatible with IP-protected KERN SFE platform scales Category: Scales accessories FAQ Which platform sizes are compatible with this stand? The KERN SFE-A03 stand fits platform sizes of 500 × 400 × 140 mm and 650 × 500 × 140 mm, matching common SFE configurations. Can the stand be used with IP-protected scales? Yes. The stand is intended for use with IP-protected KERN SFE platform scales and allows the evaluating unit to be raised without altering the scale’s protection arrangement. How heavy is the stand and is it suitable for mobile bench arrangements? The mounting weighs approximately 1.4 kg, offering a balance between portability and stable support for the evaluating unit in workshop settings. What is the primary purpose of the stand? The stand is designed to elevate the display/evaluating unit of compatible platform scales to an ergonomic working height of about 600 mm for clearer readings and reduced operator strain. Are there other variants or sizes available for the same application? This entry describes SKU SFE-A03 by KERN; no additional variants are listed in the provided product data. Manufacturer: KERN; Country of origin: CN; No manufacturer contact provided.
600mm Stand for Platform Scale, Raised Indicator Mounting - KERN
Take advantage of an elevated indicator for clearer readings, the compact approx. 600 mm height and the lightweight 0.38 kg construction to improve workflow and handling; order the stand directly via Metav Werkzeuge or consult our advisors for tailored integration support. KERN SFB-A01 stand — 600 mm height for KERN platform scales The KERN SFB-A01 is a purpose-built stand that raises the weighing indicator to a practical working height for stainless-steel platform scales, improving legibility and placement in workshop and industrial environments. Height approx. 600 mm Compatible with KERN SFB platform scales Lightweight 0.38 kg for easy handling Raise the indicator for faster, more accurate readings Raising the display unit on a dedicated stand reduces awkward viewing angles and minimises handling during routine weighing tasks. The 600 mm elevation improves visibility and supports an ergonomic workflow, which can reduce reading errors and time spent adjusting the set-up. In production and quality-control contexts where repeatability and speed matter, positioning the indicator at eye or bench level simplifies operator routines and helps keep processes consistent. Compact, compatible and simple to integrate into weighing systems Designed specifically for use with KERN stainless-steel platform scales, this stand ensures direct compatibility without bespoke adapters. The compact footprint and 0.38 kg mass make it straightforward to mount, relocate or store, while preserving a stable attachment for the indicator. For teams that standardise on KERN components, the accessory integrates cleanly into existing weighing stations and supports a uniform equipment configuration across multiple benches or sites. Dependable supply and professional buying advantages Sourcing the stand from a specialist distributor keeps procurement efficient and predictable: Metav Werkzeuge combines extensive stock coverage with a quality filter at its Emmerich location, ensuring dependable supply for industry and trade. Choosing this accessory supports streamlined vendor management and aligns with established calibration and workflow practices, contributing to a reliable weighing environment without excessive complexity. For straightforward integration and assured supply of the KERN SFB-A01 stand, contact Metav Werkzeuge in Emmerich for tailored advice and secure delivery. Technical data Article number: SFB-A01 Manufacturer: KERN GTIN: 4045761144774 Country of origin: CN Tariff number: 73269098 Core data Stand height: approx. 600 mm Weight: 0.38 kg eClass: 21170601 Special features Suitable for stainless-steel platform scale KERN SFB Product group: Stands / accessories for scales Category: Accessories for scales FAQ Is the stand compatible with other KERN platform scales? The KERN SFB-A01 stand is specified for use with KERN SFB stainless-steel platform scales; compatibility with other models should be checked against the scale's mounting points. What is the exact height of the stand? The stand provides an elevation of approximately 600 mm, offering improved indicator visibility for typical bench and floor-mounted weighing set-ups. Does the stand require tools for assembly? Assembly for the KERN SFB-A01 is straightforward; standard workshop tools typically suffice for mounting the indicator to the stand. Is the stand suitable for mobile workflows? At 0.38 kg the stand is lightweight and can be repositioned easily, supporting flexible layout changes in production and testing areas. Can the stand be used in humid or stainless environments? The KERN SFB-A01 is intended for stainless-steel platform scale systems; users should confirm specific environmental resistance with the scale manufacturer if exposure to moisture or corrosive conditions is expected. KERN — Country of origin: CN — Manufacturer contact: not provided
600mm Stand For Platform Scales, Height 600mm Adjustment, For KERN IFB/IFS Models - KERN
Take advantage of the compact 600 mm lift and precise compatibility with selected platform scales for improved operator ergonomics and a tidier workstation. The lightweight construction (approx. 1.27 kg) simplifies retrofitting and handling while keeping the indicator clearly visible. Order the KERN IFB-A02 stand directly via Metav Werkzeuge or ask our consultants if needed. KERN IFB-A02 — stand for platform scales, approx. 600 mm height The KERN IFB-A02 is a stand designed to raise the indicator/display unit of selected KERN IFB and IFS platform scales, improving visibility and workflow in industrial and workshop settings. 600 mm height for ergonomic viewing Compatible with selected KERN IFB and IFS scales Lightweight design, approx. 1.27 kg Improved operator posture and workflow Raising the display by 600 mm brings the indicator to eye level for many workbenches, reducing the need to bend or crouch and thereby supporting faster, more comfortable weighing cycles. The riser keeps the display clearly visible above stacked items or adjacent equipment, which helps to avoid reading errors and supports consistent process steps. By focusing on practical ergonomics, the stand contributes to smoother operation and fewer interruptions during repetitive tasks. Clear compatibility for safe retrofitting Compatibility is specified clearly for dependable integration: the stand is suitable for KERN IFB platform scales with weighing-plate sizes 400×300×128 mm, 500×400×130 mm, 650×500×142 mm and 800×600×200 mm, and for KERN IFS models with plate sizes 400×300×120 mm, 500×400×120 mm and 650×500×140 mm. This explicit size matching reduces installation uncertainty and ensures the display sits correctly in relation to the load plate, maintaining calibration geometry and user access to controls. Easy handling and concise installation benefits At approximately 1.27 kg, the stand’s lightweight nature enables single-person handling during installation or repositioning, which reduces downtime when reconfiguring a workstation. The unit functions as a dedicated riser for the indicator, allowing the weighbridge to remain unchanged while the display position is optimised. For workshops requiring flexible layout or intermittent relocation of scales, this translates into practical time savings and less effort during routine adjustments. Reliable supply and partner competence Sourced under the KERN designation and supplied through Metav Werkzeuge’s European quality channel, the stand is intended for industrial and trade use where dependable accessories matter. Choosing a purpose-made riser designed for the listed platform sizes supports consistent weighing practice and reduces the likelihood of improvised solutions that can affect measurement ergonomics. Metav’s Emmerich-based distribution acts as a quality filter for workshop equipment, ensuring straightforward procurement and traceable delivery for professional users. For ergonomic indicator mounting and reliable integration, request the KERN IFB-A02 via Metav Werkzeuge or contact our technical consultants at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice from Emmerich. Technical data Article number: IFB-A02 Manufacturer: KERN SKU: IFB-A02 GTIN: 4045761112759 Country of origin: CN Net weight: 1.27 kg Tariff number: 73269098 Core specifications Height: approx. 600 mm Suitable platform sizes (IFB): 400×300×128 mm; 500×400×130 mm; 650×500×142 mm; 800×600×200 mm Suitable platform sizes (IFS): 400×300×120 mm; 500×400×120 mm; 650×500×140 mm Compatibility and features Purpose: raises indicator/display unit Lightweight design for easy handling Intended for selected KERN IFB and IFS platform scales FAQ Is this stand compatible with all KERN IFB and IFS models? The stand is compatible with KERN IFB models with plate sizes 400×300×128 mm, 500×400×130 mm, 650×500×142 mm and 800×600×200 mm, and with KERN IFS models having 400×300×120 mm, 500×400×120 mm or 650×500×140 mm plates. Will the stand affect the scale’s calibration? When used as specified for the matching platform sizes, the stand positions the indicator without changing the load plate or weighing geometry; any required calibration adjustments should follow the scale manufacturer’s routine procedures. How much does the stand weigh and who can handle installation? The stand weighs approximately 1.27 kg, allowing single-person handling for most workshop installations and straightforward repositioning when required. What is the primary function of this accessory? The accessory is a purpose-built riser to elevate the indicator/display unit of compatible platform scales, improving readability and workflow at the weighing station. Can the stand be used with non-KERN scales? Compatibility is defined by plate dimensions and mounting arrangement; use is recommended only with the specified KERN IFB and IFS models to ensure secure placement and correct alignment. KERN — Manufacturer; Metav Werkzeuge, Emmerich am Rhein; Email: info@metav-werkzeuge.com; Tel: +49 2822 7131930
600mm Stand for SXS and IXS Models, Compatible with 500x400x123–650x500x133.5mm Weighing Platforms - KERN
Stable mounting, a 600 mm working height and broad compatibility with SXS and IXS weighing systems deliver a precise, space-saving support solution for routine metrology. The compact 1.8 kg construction simplifies repositioning while maintaining a reliable platform for consistent weighing results. Order the stand directly via Metav Werkzeuge or consult our specialists for integration advice. IXS-A04 stand for SXS and IXS — 600 mm working height, compact support by KERN The IXS-A04 is a dedicated support stand for SXS and IXS scale systems, designed to position weighing platforms at an ergonomic and repeatable height for workshop and laboratory use 600 mm height for stable mounting Compatible with SXS and IXS scale series Fits plate sizes 500×400–650×500 mm Lightweight construction at 1.8 kg Stable positioning that improves weighing consistency The stand provides a stable mounting point that reduces external disturbances during measurement. By setting the weighing platform at a defined 600 mm height, the accessory standardises the vertical position of samples and handling tools, which helps to reduce variability in repeated readings. The result is an operational workflow that supports precision and reproducibility in daily checks and quality control tasks, with the mounting interface designed for straightforward alignment to existing equipment. Fast integration into existing weighing setups Designed for compatibility with the SXS and IXS families, the support accepts weighing plates from 500×400×123 mm up to 650×500×133.5 mm, allowing it to be integrated without altering the main instruments. The light overall mass (1.8 kg) enables quick repositioning when process changes or bench reorganisation are required, while keeping handling effort low. Installation is practical and time-efficient, so production or inspection lines can be adapted with minimal downtime and the weighing station remains ready for immediate use. Practical build for workshop and laboratory routines Manufactured for the KERN range and sourced from China, the stand is intended as a reliable accessory for everyday metrology tasks. Its compact footprint prioritises bench space and contributes to a tidier work area, which supports faster sample throughput and safer handling. The accessory’s specification focuses on functional compatibility and operational convenience, ensuring that the weighing system performs consistently within a professional environment where repeatability and ease of use are essential. For specific integration guidance or to arrange supply from Metav Werkzeuge in Emmerich, please contact our team via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and rapid processing. Technical data Article number: IXS-A04 Manufacturer: KERN SKU: IXS-A04 GTIN: 4045761199767 Country of origin: China Category: Scales accessories Core specifications Height: 600 mm Weight: 1.8 kg Compatible weighing plate sizes: 500×400×123 mm to 650×500×133.5 mm Tariff code: 73269098 eClass: 21170601 Special features Suitable for SXS and IXS scale series Designed for precision weighing setups Compact footprint for bench-top use Lightweight construction for easy repositioning FAQ What scales is the stand compatible with? The answer: The KERN stand is compatible with the SXS and IXS series and accepts plate dimensions from 500×400×123 mm up to 650×500×133.5 mm. Does the stand affect weighing accuracy? The answer: When used as intended, the support stand improves handling repeatability and helps reduce external disturbances, supporting consistent weighing results with SXS and IXS systems. How heavy is the accessory and is it portable? The answer: The support weighs 1.8 kg, providing a balance between portability and stability for workshop repositioning. Is the height adjustable? The answer: The product is specified with a 600 mm working height to standardise platform position; further mechanical adjustments are not listed in the supplied data. Who manufactures the stand and where is it produced? The answer: The accessory is supplied under the KERN brand and is produced in China; Metav Werkzeuge can provide local supply and integration advice. KERN — China — Contact via Metav Werkzeuge: info@metav-werkzeuge.com / +49 2822 7131930
655x505x130 mm Conveyor Roller Attachment For Platform Scale, Aluminium Profile Frame, Conductive Galvanised Ball-Bearing Rollers - KERN
Benefit from a robust, modular roller conveyor attachment that converts platform scales into a fast weighing station; its aluminium profile frame and ball-bearing steel rollers ensure reliable operation and simple maintenance. Order the KERN unit directly via Metav Werkzeuge or request a customised offer from our consultants. KERN YRO-03 Roller Conveyor Attachment — aluminium profile frame, ball-bearing steel rollers KERN YRO-03 is a roller conveyor attachment designed to turn compatible platform scales into a resilient weighing system for production and shipping applications. Modular aluminium profile frame for easy servicing Ball-bearing, galvanised steel rollers for smooth motion Conductive rollers suitable for standard dry environments Compatible with common KERN platform scales Faster weighing where conveyor and scales meet The roller conveyor attachment enables fast weighing of goods directly in conveyor lines, reducing handling time and increasing throughput in production and dispatch areas. Fitted on top of a platform scale, the unit permits items to be weighed while moving or at fixed points, supporting efficient process flows. The modular design allows quick removal for maintenance or replacement of individual components, minimising downtime and keeping operations continuous. Industrial build with low maintenance demand Constructed around an aluminium profile frame, the attachment combines light weight with structural robustness for everyday industrial use. The ball-bearing, galvanised steel rollers run smoothly under load and are electrically conductive, which helps to control static and maintain consistent weighing results. The modular construction also supports easy cleaning, since panels and rollers can be disassembled without special tools, enabling hygienic upkeep and longer service life. Practical compatibility and simple operation The attachment is designed for straightforward integration with several platform scale families and is mounted by plugging onto the scale platform, creating a stable weighing station in seconds. The running direction is longitudinal with a roller pitch of approximately 30 mm, supporting stable transport of parcels and pallets in dry environments. The unit is supplied as a single roller conveyor attachment (without scale) and is optimised for use in production and shipping lines where quick, repeatable weight checks are required. Contact Metav Werkzeuge in Emmerich for a tailored compatibility check or a customised offer for the KERN YRO-03 roller conveyor attachment — email info@metav-werkzeuge.com or call +49 2822 7131930 and request assistance from our specialists Technical data Article number: YRO-03 GTIN: 4045761190290 Manufacturer: KERN Country of origin: DE Tariff number: 84239010 Core specifications Dimensions: 655 x 505 x 130 mm (L x W x H) Weight: 12.2 kg Roller pitch: approx. 30 mm Running direction: longitudinal Special features Aluminium profile frame Ball-bearing, galvanised steel rollers Conductive rollers Modular construction for disassembly and cleaning Suitable for use in dry environments Compatible with platform scales IFB, IFS, KFP, KXP, SXS Scope of delivery: 1 roller conveyor attachment (without scale) FAQ Is the unit compatible with existing platform scales? Yes. The KERN YRO-03 roller conveyor attachment is compatible with a range of KERN platform scales, including IFB, IFS, KFP, KXP and SXS families; compatibility checks can be confirmed with Metav Werkzeuge. How is the attachment mounted and removed? The roller conveyor attachment is mounted by plugging it onto the platform scale; the modular design permits straightforward removal for cleaning or part replacement. Can the rollers handle static-sensitive goods? The rollers are galvanised steel and are electrically conductive, which helps to manage static in standard dry environments and supports stable weighing performance. Is the unit suitable for wet or corrosive environments? The attachment is specified for use in dry environments; for special environmental conditions, consult Metav Werkzeuge for possible adaptations. What is included in the delivery? Delivery comprises one roller conveyor attachment only; the platform scale is not included. Manufacturer: KERN — Germany. Dealer contact: Metav Werkzeuge, Emmerich am Rhein — info@metav-werkzeuge.com, +49 2822 7131930, WhatsApp +49 170 2837271
7 m Paper Roll 45 mm Width, 30 mm Core Diameter, Pack of 5 - KERN
Combine KERN build quality with standard dimensions — 45 mm width and 7 m length per roll — for reliable, low-interruption receipt printing; supplied as a set of 5 for fewer changeovers. Order directly via Metav Werkzeuge or consult our specialists for compatibility and supply assurance. KERN Paper Rolls YKN-A01 – 45 mm width, 7 m length A set of paper rolls designed for receipt and scale printer use, offering standard dimensions for fast replacement in retail and workshop weighing equipment. 45 mm paper strip width 30 mm roll diameter 7 m paper length per roll Supplied as a set of 5 Reduce downtime with standard-format replacement rolls The 45 mm strip width and 7 m length per roll provide a predictable supply cycle that helps minimise interruptions during peak operation. These replacement rolls are supplied in a set of 5, which reduces the frequency of consumable changes and supports continuous printing on weighing stations and receipt printers. The clear numeric specifications — 45 mm, 30 mm diameter — allow straightforward procurement and simplify stock management for service departments and procurement teams. Dependable operation and consistent print output Manufactured under the KERN designation and originating from Germany, the rolls deliver uniform paper feed and predictable handling characteristics, which helps avoid jams and misfeeds in compact printers used with scales. The consistent core and roll geometry enable stable printing contrast and reduce maintenance cycles for small-scale printers. The emphasis on reliable performance and standard dimensions supports predictable uptime and smoother logistics for workshops and retail counters. Practical specification for workshop and retail environments Compact roll dimensions (30 mm roll diameter) make these consumables suitable where space is limited and quick roll replacement is essential. The specification list — 45 mm width, 7 m length — enables technical teams to match consumables precisely to device requirements, avoiding trial-and-error fits. Supplied as replacement rolls rather than loose paper, the pack reduces procurement complexity and helps maintain a reliable supply chain for weighing equipment accessories. Contact Metav Werkzeuge in Emmerich for stock confirmation and technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 to secure KERN YKN-A01 replacement rolls and ensure uninterrupted operation Technical data Article number: YKN-ACC SKU: YKN-A01 GTIN: 4045761157934 Manufacturer: KERN Country of origin: Germany Tariff number: 84239010 Product category: Scales > Accessories Weight: 0.1 kg Facts Paper strip width: 45 mm Roll diameter: 30 mm Length per roll: 7 m Pack quantity: 5 Weight per pack: 0.1 kg Special features For scales and receipt printers (accessory) Supplied as 5 replacement rolls Standard 45 mm width for scale printers Origin: Germany FAQ Are these rolls compatible with standard scale printers? The KERN paper rolls YKN-A01 feature a 45 mm strip width and standard geometry, making them suitable for many scale and receipt printers designed for narrow rolls. What is the length of each individual roll? Each roll in the KERN YKN-A01 pack measures 7 m in paper length, providing multiple receipts per roll before replacement is required. How many rolls are included in one pack? One pack contains 5 replacement rolls, sold together to reduce the need for frequent reordering. Is the manufacturer specified for these rolls? The rolls are supplied under the KERN designation (SKU YKN-A01) and are listed with Germany as the country of origin. KERN · Germany · GTIN: 4045761157934
73×61mm Label Roll 100 Labels For KERN YKE-01 - KERN
Take advantage of a compatible label supply that keeps weighing stations productive: the roll combines reliable compatibility with KERN scales and a standard 73×61 mm format for clear, legible prints. Order the label roll directly via Metav Werkzeuge or contact our consultants for delivery from Emmerich. Label roll YKE-A02 – compatible with KERN YKE-01, 73×61 mm The Label roll YKE-A02 is a roll of adhesive labels designed for use with industrial and retail weighing devices, especially for the KERN YKE-01 series. Compatible with KERN YKE-01 scales Label size 73×61 mm for readable prints 100 labels per roll for fast replacement Reliable compatibility that keeps production running The replacement roll is engineered for seamless integration with KERN weighing terminals, ensuring printer alignment and label feed are consistent. Thanks to the matched format and roll design, downtime for label changes is minimised and labelling cycles remain steady. This reduces interruptions in packing or retail workflows and supports efficient throughput on the weighing line. Clear, standardised label format for consistent results The 73×61 mm format delivers a balanced print area for text, barcodes and legal information. A uniform label size simplifies template setup in scale printers and supports quick scanning at checkout or in logistics. Where legibility and barcode reliability matter, the standard dimensions help maintain machine readability and reduce scanning errors during subsequent processing. Practical supply design for uninterrupted operation With 100 labels per roll, the product offers a pragmatic balance between handling frequency and storage. The roll format is suitable for quick replacement, enabling teams to change media with minimal handling time. The compact weight supports straightforward stocking and rapid deployment across multiple scales without occupying excessive shelf space. Metav quality filter and dependable sourcing Sourced from KERN and supplied from Metav Werkzeuge's warehouse in Emmerich, the roll benefits from a quality inspection process aimed at consistent delivery for workshops and businesses. Metav’s broad programme and reliable logistics mean that compatible consumables are available as part of a centralised supply strategy, supporting long-term operational stability and supplier consolidation. Contact Metav Werkzeuge to secure KERN-compatible label rolls from stock in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Technical data Article number: YKE-A02 Manufacturer: KERN SKU: YKE-A02 Facts Weight: 0.12 kg Paper strip width: 78 mm Label size: 73×61 mm Labels per roll: 100 Special features Compatible with KERN YKE-01 GTIN: 4045761179912 Country of origin: PL Commodity code: 84239010 FAQ Are these labels compatible with KERN YKE-01 printers? Yes. The YKE-A02 roll is specified for compatibility with KERN YKE-01 weighing terminals to ensure correct feed and print alignment. How many labels are on each roll? Each roll contains 100 labels, supplied in the standard 73×61 mm format suitable for scale printers. What is the print area of the labels? The label format is 73×61 mm, providing sufficient space for barcodes, product data and regulatory information. Can the roll be stocked centrally for multiple scales? Yes. The compact roll format and Metav Werkzeuge’s logistics make it suitable for central stocking and distribution to multiple weighing stations. Manufacturer: KERN — Country of origin: PL — GTIN: 4045761179912
750-1000mm Height-Adjustable Tripod Stand For Indicator Unit, Stainless Steel Tripod - KERN
Reliable stainless steel tripod with height-adjustable support and a solid three‑leg base guarantees steady elevation of weighing and evaluation units; combine robust construction and ergonomic adjustment for uninterrupted measurement workflows. Order directly via Metav Werkzeuge or consult our technical advisers for individual compatibility. YKP-01 Tripod Stand — Stainless steel, height-adjustable 750–1000 mm (KERN) A YKP-01 tripod stand designed to raise weighing indicators and evaluation units, optimised for workshop and laboratory scale applications. Height-adjustable 750–1000 mm Stainless steel construction Solid three‑leg tripod base Compact weight of 3 kg Engineered stability for consistent results The tripod provides a stable platform for measurement electronics, reducing vibration and movement that can impair readings. Constructed with a three‑leg base, the stand distributes weight evenly to maintain level positioning on uneven floors, which supports reliable output from connected indicators. This stability translates into fewer rechecks and a smoother production process, especially where repeatable accuracy is essential in weighing tasks. Durable materials built for workshops Made from stainless steel with a solid tripod foot, the stand resists corrosion and daily wear common in industrial environments. The corrosion‑resistant finish ensures longevity and reduces maintenance intervals, which means less downtime and lower total cost of ownership for workshop equipment. The material choice also supports hygienic environments where cleanability is required, while preserving structural integrity under routine use. Ergonomic adjustment for practical use The height-adjustable range of 750–1000 mm enables ergonomic placement of displays and evaluation units at operator height, improving visibility and reducing strain during frequent readings. Quick adjustment allows technicians to set the optimal working height for bench, trolley or floor setups without complex tools. This straightforward adaptability enhances workflow efficiency and contributes to a safer, more productive working environment. Seamless integration with weighing systems Designed for mounting evaluation devices and indicators, the tripod is compatible with a wide range of scale accessories and display units used in industrial metrology. The compact design and 3 kg mass support portability between workstations while preserving precision during measurement tasks. Installation is uncomplicated; the stand serves as a practical elevation solution where stable, elevated mounting of weighing electronics is required. Contact Metav Werkzeuge in Emmerich to confirm compatibility with specific indicators and to arrange delivery or technical consultation for the KERN YKP-01 tripod stand Technical data Article number: YKP-01 Manufacturer: KERN GTIN: 4045761184367 Country of origin: CN Tariff number: 73269098 ECLASS: 21170601 Facts Weight: 3 kg Height adjustment: 750–1000 mm Special features Material: stainless steel with solid three‑leg tripod base Application: for elevating weighing indicators and evaluation units Category: Scales accessories (Waagen > Zubehör) SKU: YKP-01 FAQ Is the tripod suitable for all types of weighing indicators? The tripod stand is designed for mounting weighing indicators and evaluation units; compatibility depends on the indicator's base plate or mounting interface and can be checked with the YKP-01 specifications. How is the height adjusted and locked in place? Height adjustment is mechanical within the 750–1000 mm range and is secured by the stand's locking mechanism to ensure stable positioning of the mounted device. Can the stand be used in corrosive or humid environments? The stainless steel construction provides corrosion-resistant properties, making the tripod suitable for many workshop and laboratory conditions where increased durability is required. Is the tripod portable between workstations? At a compact weight of 3 kg, the tripod is intended for easy repositioning while maintaining a robust base for accurate measurement tasks. What information identifies the product for ordering or stock checks? Use the SKU YKP-01, GTIN 4045761184367 and manufacturer KERN when checking availability or ordering. Metav Werkzeuge, Emmerich am Rhein, Germany | info@metav-werkzeuge.com | +49 2822 7131930
750–1000mm Tripod Stand For Indicator/Display, Height‑Adjustable Stainless Steel Base - KERN
Take advantage of a height‑adjustable elevation solution combining robust stainless‑steel construction and a massive three‑legged tripod for reliable stability and precise positioning. Order the KERN YKP‑02 directly via Metav Werkzeuge or ask our consultants for advice and delivery from Emmerich. KERN YKP-02 Tripod Stand — height‑adjustable 750–1000 mm, stainless steel The KERN YKP‑02 is a tripod stand designed to raise indicator and evaluator units for workshop and laboratory use, providing stable positioning and broad compatibility with multiple KERN scale series. Height-adjustable 750–1000 mm Robust stainless-steel tripod base Designed for indicator/evaluator units Compatible with multiple KERN series Stable elevation for precise readings A height-adjustable tripod removes guesswork from set‑up: the 750–1000 mm range permits accurate placement of the evaluation unit at the operator’s preferred working height, reducing posture changes and measurement variation. The massive three‑legged base delivers stability on uneven surfaces, which supports repeatable readings and protects sensitive load cells from unwanted lateral forces. This results in fewer rechecks and a smoother inspection workflow. Built for compatibility and workflow efficiency The stand is intended for mounting evaluation units and is compatible with a wide range of KERN series, simplifying procurement and reducing inventory complexity. Its universal mounting capability ensures the tripod integrates with existing weigh‑and‑measure equipment, enabling faster set‑up times and less downtime between jobs. The compatibility aspect therefore contributes directly to improved throughput and predictable production planning. Durable materials for long service life Constructed from stainless steel with a heavy‑duty tripod foot, the stand resists corrosion in workshop environments and sustains repeated handling without loss of function. Where painted steel components are supplied, the finish adds protection against abrasion. The material choice focuses on longevity and low maintenance, translating to reduced total cost of ownership over the product life cycle. Practical handling and application benefits With a net weight of 2.6 kg and a compact footprint, the tripod offers a practical balance between portability and robustness. The design supports simple vertical adjustment while keeping the mounted device secure; this simplifies calibration tasks and routine inspections. For users aiming for reliable positioning of displays and indicators, the stand enables stable visual alignment and safer working practices. Contact Metav Werkzeuge today for tailored advice on integrating the KERN YKP‑02 tripod into existing measurement setups and to arrange prompt delivery from our Emmerich warehouse. Technical data Article number: YKP-02 Manufacturer: KERN SKU: YKP-02 GTIN: 4045761184374 Origin: CN Facts Height range: 750–1000 mm Weight: 2.6 kg HS code (Tariff): 73269098 eCl@ss: 21170601 Special features Stainless steel with massive tripod base Height-adjustable Painted steel option / stainless finish For elevating indicator / evaluator units Compatible with BFB, BXS, BFS, BFA, BBB, BBN, BKN, IFS, IFB, KFE-TM, KXG-TM, KXS-TM, KEN-TM, NFB, NBB, SFE, UFA, UFB, UFC FAQ What is the adjustable height range of the tripod? The KERN YKP‑02 tripod offers a height range of 750–1000 mm, which allows precise positioning of evaluation units at ergonomic working heights. Which materials are used in the construction of the stand? The stand is supplied in stainless steel with a massive three‑legged base; painted steel versions are noted where applicable for increased surface protection. Is the tripod compatible with my KERN evaluation unit? Compatibility is wide: the KERN YKP‑02 is designed to fit numerous KERN series including BFB, BXS, BFS, BFA and others listed in the technical information, ensuring straightforward integration. How heavy is the tripod and what does that mean for handling? The KERN YKP‑02 weighs 2.6 kg, balancing ease of repositioning with sufficient mass for stable mounting in routine workshop and laboratory tasks. Can the stand improve measurement repeatability? Yes. By providing a stable, height‑adjustable support for the evaluation unit, the tripod reduces movement and misalignment, which helps improve repeatability of readings. Manufacturer: KERN; Origin: CN; Contact: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271
76mm Paper Roll 65mm Core, 40m Length, Pack of 5 - KERN
Benefit from consistent operation and reduced downtime thanks to the combination of long roll length and standard dimensions; these 76 mm-wide, 65 mm-diameter rolls are supplied in a pack of 5 for uninterrupted printing. Order directly via Metav Werkzeuge or consult the sales team for tailored delivery from Emmerich. Paper Rolls YKG-A01 — 76 mm width, 65 mm diameter (5-pack) by KERN The Paper Rolls YKG-A01 provide 76 mm-wide paper with a 65 mm diameter, suitable for use with scales and compatible receipt printers in industrial and retail environments 76 mm paper width 65 mm roll diameter 40 m length per roll Supplied as a 5-piece pack Reliable supply for continuous operation Long consumable life reduces production interruptions: each roll delivers 40 m of paper, which lowers the frequency of roll changes and supports steady shift operation. The pack of 5 minimises handling time and inventory turnover, providing a pragmatic advantage for busy workshops and retail counters. The combination of standard 76 mm width and 65 mm outer diameter helps to ensure a consistent feed and dependable printing performance across compatible devices. Practical benefits that simplify daily workflows Choosing these rolls improves operational efficiency through quick replacement and straightforward handling. The standard dimensions mean simple stock management and less time spent verifying compatibility; the compact packaging supports organised storage at the workbench. Where predictable output and low interruption are priorities, the quick replacement and low maintenance characteristics translate directly into measurable time savings and smoother processes. Compatibility explained for purchasing decisions The dimensions serve as the primary compatibility indicators: 76 mm is the nominal paper width and 65 mm is the roll diameter. These specifications are commonly supported by scale printers and point-of-sale devices intended for industrial weighing and receipt printing. As consumables from KERN, the rolls are presented as a practical option for procurement chains that need standardised, ready-to-install supplies rather than bespoke or speciality media. For reliable replacement consumables from KERN and steady operation at the workstation, contact Metav Werkzeuge in Emmerich for availability and rapid dispatch from our European stock. Technical Data SKU: YKG-A01 Manufacturer: KERN Category: Scales — Accessories Country of origin: JP Tariff number: 84239010 Facts Paper width: 76 mm Roll diameter: 65 mm Length per roll: 40 m Pack count: 5 Weight (per pack): 0.1 kg Special features Designed for scale and receipt printers Supplied as five rolls Standardised dimensions for compatibility FAQ Which devices are compatible with these rolls? Compatibility is determined by the 76 mm paper width and 65 mm roll diameter; the rolls suit scale printers and receipt printers that accept these standard dimensions and are commonly used with KERN weighing equipment. How long does one roll last in regular use? Each roll contains 40 m of paper; actual runtime depends on print density and usage pattern, while the pack of 5 offers extended supply and reduced changeovers. Are these rolls supplied by a recognised manufacturer? Yes, the rolls are branded KERN and offered as standard consumables for workshop and retail applications that use scales and receipt printers. What is included in the delivery? Delivery includes five individual paper rolls as specified; each roll is 76 mm wide with a 65 mm diameter and 40 m length. KERN — Japan — contact details not available
800mm Stand for Indicator Display, Height ~1040mm, Compatible With Kern Weighing Beams And Floor/Palette Scales - KERN
Take advantage of a lightweight, workshop-ready stand that raises the weighing indicator for clearer readings and flexible installation; compatible with a wide range of KERN scale models and ready to order via Metav Werkzeuge or discussed with our consultants for application advice. KERN BFS-A07 stand — Indicator-unit stand, KERN-compatible The BFS-A07 stand is a compact mounting solution designed to raise weighing indicator units for industrial and workshop scales, making displays easier to read and integrating cleanly with existing KERN equipment. Compact stand for raising indicator units Compatible with KERN UFA, BFB, BFN and BFS Also fits KERN pallet and through-rail scales Lightweight construction approx 2.6 kg Clear readings and dependable positioning for weighing tasks The stand offers stable positioning for indicator units, which improves readability and reduces handling errors during routine weighing operations. Built as a dedicated accessory for scales, this mounting solution ensures the indicator is elevated away from the weighing platform, helping to prevent signal interference and making the display accessible from a comfortable viewing angle. The combination of a compact footprint and robust support simplifies integration into production lines and workshop benches, delivering practical benefits without complex modifications. Practical workshop integration and ergonomic benefit With a focus on convenience, the support stand reduces clutter on the work surface and provides an ergonomic viewing height for operators handling frequent weighings. The lightweight construction allows for repositioning when workflows change, while the compact design maintains a minimal footprint in tight areas. Installation is straightforward when used with the compatible KERN equipment named below, enabling quick set-up in dispatch, goods-inwards or production cells where clear indicator visibility speeds up processes and reduces downtime. Clear compatibility to match existing KERN systems The stand is intended specifically as an accessory for KERN weighing systems, offering compatibility with a range of models so that workshops can standardise on a single mounting solution. By matching the stand to compatible weighing beams, floor scales and pallet models, users gain a consistent mounting approach across different scale types. This targeted compatibility minimises uncertainty when specifying accessories and supports a streamlined workflow in industrial weighing applications. For tailored advice or order placement, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the KERN BFS-A07 stand and its suitability for specific scale setups. Technical data Article number: BFS-A07 Manufacturer: KERN SKU: BFS-A07 GTIN: 4045761111547 Weight: 2.6 kg Origin: CN Facts Weight: 2.6 kg GTIN: 4045761111547 Commodity code: 73269098 ECLASS: 21170601 Compatibility & features Accessory for scales (stands category) For raising weighing indicator / evaluator units Compatible with weighing beams KERN UFA Suitable for floor scales KERN BFB, BFN and BFS Fits pallet scales KERN UFB and UFN and through-rail scale KERN NFB FAQ What scales is this stand compatible with? The stand is compatible with a range of KERN models; compatible types include weighing beams KERN UFA, floor scales KERN BFB/BFN/BFS, pallet scales KERN UFB/UFN and through-rail scale KERN NFB, ensuring broad applicability in industrial weighing setups. Is the stand easy to move around the workshop? Yes. The KERN BFS-A07 stand has a lightweight construction of approximately 2.6 kg, allowing for straightforward repositioning when workflows or station layouts change. What is the primary purpose of the stand? The stand is designed to raise the weighing indicator unit, providing an ergonomic viewing height and reducing interference with the weighing platform for clearer, more reliable readings. Can this stand be used for multiple indicator models? The stand is provided as a universal accessory for the compatible KERN scale families listed above, making it suitable for use with a variety of indicator layouts within those model ranges. Manufacturer: KERN, Origin: CN
80mm Thermal Paper Roll 61mm Core 50m Length 5-Pack - KERN
Combine reliable printing, a standard 80 mm paper width and a 50 m roll length for fewer interruptions and consistent documentation. Order the paper rolls directly via Metav Werkzeuge or ask our consultants if additional advice is required. KERN YKH-A01 Paper Rolls — 80 mm width, 50 m length (5-pack) The KERN YKH-A01 delivers dependable receipt printing for scales and weighing systems across industrial and retail applications. 80 mm paper width for standard receipt printers 61 mm roll diameter fits common holders 50 m length for longer print runs Pack of 5 rolls for extended supply Continuous printing reliability for weighing workflows The rolls are designed to support uninterrupted documentation in busy environments where consistent print output matters. With the 80 mm print width and a 61 mm core diameter, the supply integrates with the majority of receipt printers and scale-mounted printers used in workshops and retail counters. This compatibility reduces the need for frequent roll changes and minimises operational interruptions, ensuring smoother measurement and billing processes. The design suits extended use without complex handling. Fewer roll changes and simplified stock management Each roll provides 50 m of printable paper, which lengthens intervals between replacements and lowers handling time per shift. Supplied as a five-roll set, the assortment offers a straightforward inventory approach for stores and workshops, improving procurement efficiency. The longer roll length and standard dimensions translate into cost-effective operation by reducing downtime associated with roll swaps and by streamlining storage of consumables. Practical suitability and clear documentation The paper set is intended for use with weighing devices and accessories where clear legible prints are required for records and traceability. The product originates from Japan, reflecting consistent manufacturing standards. For customers unfamiliar with printer consumables, the key metrics—80 mm width, 61 mm diameter and 50 m length—define whether a roll will fit a given printer holder and how long it will last in daily use. This makes selection straightforward even for those new to procurement of scale accessories. For reliable receipt printing with KERN paper rolls and expert procurement support, contact Metav Werkzeuge for supply and tailored advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: YKH-A01 Manufacturer: KERN Country of origin: Japan Dimensions & core data Paper width: 80 mm Roll diameter: 61 mm Roll length: 50 m Weight: 0.1 kg Compatibility & contents Contents: 5 rolls Intended use: receipt printing for scales and weighing devices Category: Scales accessories FAQ Are these rolls compatible with standard scale printers? The rolls are designed to match common scale and receipt printers; check that the device accepts 80 mm paper width and a 61 mm core diameter for compatibility with KERN YKH-A01. How long does one roll typically last in continuous use? With a length of 50 m, a single roll lasts significantly longer than standard short rolls; exact runtime depends on print density and volume. Is the pack size suitable for workshop stock management? The set contains multiple rolls to simplify stocking and reduce the frequency of reorders for businesses using scales regularly. Can these rolls be used in retail point-of-sale systems? Yes, provided the POS printer accepts 80 mm width and the stated core diameter; the rolls are suitable for many retail and industrial printers. Where is the product manufactured? The paper rolls are produced in Japan and distributed under the KERN brand, listed as SKU YKH-A01. Manufacturer: KERN, Japan. Contact details not provided.
81mm Protective Cover For 105mm Weighing Plate, Pack Of 5 - KERN
Choose reliable protection, simple retrofitting and economical upkeep: the lightweight protective cover reduces contamination risk and keeps controls accessible, supplied as a five-piece set for fast replacement. Order the accessory directly via Metav Werkzeuge or consult our specialists for compatibility advice. Protective cover PCB-A03S05 — retrofit hood for KERN scales, five-piece set The Protective cover PCB-A03S05 provides a compact, retrofit protective hood for scales, designed to shield keyboard and housing from dust and light contamination while retaining operational access. Five-piece set for rapid replacement Retrofit fit for keyboard and enclosure Lightweight, low-profile protective hood Keep weighing stations clean and operational A dedicated protective hood reduces the frequency of maintenance and the risk of weighing errors caused by debris or splashes. The protective cover creates a barrier over the instrument's keypad and housing, helping to preserve sensor accuracy and extending service intervals. For production environments where cleanliness contributes directly to measurement reliability, this accessory supports continuous operation with minimal intervention. Fast retrofit to maintain production uptime Designed for straightforward retrofitting, the hood allows quick installation on compatible instruments without major modifications. The retrofit capability means replacement or upgrade can be completed during routine maintenance, reducing downtime and avoiding extended production stops. Supplied as a five-piece set, spare units are available immediately for fast swap-out where multiple workstations are in use. Low weight and compact design for everyday use With a negligible mass, the hood adds protection without affecting handling or footprint. The lightweight construction keeps the centre of gravity unchanged and avoids any impact on scale placement or mobility. The accessory is engineered to sit unobtrusively over the control area, preserving operator access and visibility while offering tangible protection against contaminants in standard workshop and laboratory contexts. Order KERN accessories from Metav Werkzeuge for dependable retrofitting and fast supply from our Emmerich warehouse — our consultants can advise on product matching and delivery options Technical data Article number: PCB-A03S05 Manufacturer: KERN SKU: PCB-A03S05 Facts Weight: 0.02 kg GTIN: 4045761185333 Tariff number: 39269097 eClass: 24322502 Special features Scope of delivery: 5 pieces Protective cover for keyboard and housing, retrofit Country of origin: CN Product category: Scales accessories FAQ What is included in the delivery? The PCB-A03S05 is supplied as a five-piece set; the package contains five identical protective covers for replacement or multi-station use. Can the hood be retrofitted to existing instruments? Yes. The accessory is intended for retrofit installation on compatible KERN scales and other instruments with matching control layouts and enclosure dimensions. Does the cover affect operation or visibility of controls? No. The low-profile design preserves visibility and access to keys and display while providing a barrier against dust and light contamination. What are the weight and origin of the accessory? The protective cover weighs 0.02 kg and is manufactured in CN; it is distributed under the KERN product designation PCB-A03S05. KERN — Country of origin: CN — Contact: not provided
81mm Protective Hood For Scales, Pack Of 5 - KERN
A compact, economical 5-piece set that provides lightweight, reliable protection for precision weighing platforms; ideal for routine workshop use and simple stock management. Combine practical replacement planning with consistent contamination control and order the KERN PCB-A04S05 via Metav Werkzeuge or consult our specialists for application advice. KERN PCB-A04S05 — Protective cover for scales, 5-pack The KERN PCB-A04S05 is a protective cover designed for precision weighing applications, providing localised protection for weighing platforms in industrial and workshop environments. Pack of five for convenient replacements Lightweight: 0.13 kg for easy handling Designed for KERN scale platforms Extend service intervals through dependable contamination control The protective cover acts as a simple but effective barrier against dust, light spills and particulate contamination, reducing the frequency of cleaning and calibration interventions. By limiting exposure of the weighing surface, the cover supports consistent measurement results and helps to avoid unplanned downtime in production and quality-control workflows. Its unobtrusive design contributes to uninterrupted operation without compromising access to the balance controls. Streamline workshop logistics with practical packaging Delivered as a 5-pack, the set supports planned replacement cycles, cutting administrative overhead for consumables in busy workshops. The low mass of 0.13 kg ensures each unit is easy to store and fit, simplifying handling during shift changes and maintenance rounds. This practical packaging reduces lead-time concerns for recurring use items and helps maintain a steady supply at the point of use. Professional compatibility for measurement-focused environments Designed as an accessory for precision weighing equipment, the cover integrates into standard scale workflows while maintaining the focus on measurement integrity. The product’s compatibility with KERN platforms ensures it meets expectations for industrial and trade applications where repeatability and traceability are priorities. Where cleanliness and controlled environments are required, the protective hood serves as a cost-effective measure to support quality assurance procedures. Contact Metav Werkzeuge in Emmerich for procurement guidance or to confirm compatibility with existing weighing equipment and to arrange prompt delivery of the 5-pack. Technical data Article number: PCB SKU: PCB-A04S05 Manufacturer: KERN GTIN: 4045761185340 Country of origin: CN Tariff number: 39269097 ECLASS: 24322502 Facts Weight: 0.13 kg Delivered quantity: 5 pieces Product category: Scales > Accessories Special features Intended use: Accessory for scales Category path: Scales > Accessories Packaging: Set FAQ What does the KERN PCB-A04S05 protect against? The KERN PCB-A04S05 protective cover is designed to shield weighing platforms from dust, light splashes and surface contamination that can affect measurement consistency. Is the protective cover suitable for industrial workshop use? Yes, the KERN PCB-A04S05 is intended for workshop and industrial environments where routine protection of weighing platforms supports repeatable results. How many covers are included in one delivery unit? Each delivery unit contains five covers, supplied as a practical set for straightforward replacement planning. Will the covers interfere with weighing accuracy? When used as intended, the covers do not affect the weighing process; they are designed to provide local protection while keeping the weighing surface accessible for normal operation. Can the KERN PCB-A04S05 be stored easily in a busy workplace? The set is lightweight and compact, which facilitates simple storage and rapid deployment during maintenance or shift changes. Metav Werkzeuge, Emmerich am Rhein, Germany | info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271
84×113 mm Density Determination Set For Liquids And Solids, DIN EN ISO 1183-1 - KERN
Take advantage of a compact, standards-compliant accessory set that combines precise measurement support, easy handling and full compatibility with KERN analytical balances; order via Metav Werkzeuge or consult our specialists for tailored advice. Universal density set YDB-03 — density determination set for liquids and solids, DIN EN ISO 1183-1 compliant (KERN) The Universal density set YDB-03 is a complete accessory kit for precise density determination of liquids and solids on analytical balances, designed for laboratory and workshop quality control. Complete kit for liquid and solid density testing Compliant with DIN EN ISO 1183-1 testing wire Includes stainless steel 20 g sinker Suitable for all current KERN analytical balances Reliable results through standard‑compliant design The kit is built to deliver consistent, traceable density readings by meeting established testing practice. Compliance with DIN EN ISO 1183-1 and the specified 0.5 mm wire diameter for the immersion basket reduces measurement uncertainty when determining densities of non‑foamed plastics and similar materials. The standard conformity ensures that results are comparable across laboratories and that the procedure aligns with common quality assurance frameworks, making the set suitable for routine checks and documentation in production environments. Everything required for efficient and comfortable testing Designed as an all‑in‑one solution, the set contains a beaker (Ø×H 84×113 mm), thermometer, sample holder, adapter, counterweights, a stainless steel sinker (20 g) and a universal immersion basket for both floating and sinking specimens. These components reduce setup time and minimise handling errors, which in turn shortens the measurement cycle and improves throughput. The basket’s fine wire and the included sinker enable reliable immersion procedures for a wide range of materials, while the clear layout of accessories supports a reproducible workflow even for teams with varying experience. Seamless integration into analytical balance workflows Compatibility with KERN analytical balances ensures straightforward mounting and stable measurement conditions, preserving balance calibration and minimising re‑work. For applications requiring documented traceability, an optional DAkkS calibration certificate for the sinker is available, listing relevant density and volume data. The kit’s compact footprint and balanced weight distribution make it convenient for bench use and simple storage, supporting lean laboratory routines and steady sample throughput without compromising on measurement quality. Contact Metav Werkzeuge in Emmerich for expert advice and to secure the KERN accessory set for immediate integration into laboratory workflows Technical data Article number: YDB-03 Manufacturer: KERN GTIN: 4045761152908 Country of origin: Germany Facts Dimensions (beaker Ø×H): 84 × 113 mm Weight (set): 0.65 kg Sinker mass: 20 g Tension wire diameter: 0.5 mm Tariff number: 90160090 ECLASS: 32120490 Special features Includes: thermometer, sample holder, adapter, counterweights, stainless steel sinker (20 g) Universal immersion basket for floating and sinking solids Compliant with DIN EN ISO 1183-1 Suitable for all current KERN analytical balances Optional: sinker density determination, DAkkS calibration certificate (DKD) FAQ What is the set used for? The universal density set YDB-03 by KERN is intended for precise density determination of liquids and solids using analytical balances, suitable for laboratory and workshop quality checks. Is the immersion basket standard‑compliant? Yes. The immersion basket wire has a 0.5 mm diameter and complies with DIN EN ISO 1183-1, meeting the procedure requirements for density determination of non‑foamed plastics. What items are included in the delivery? Delivery comprises a beaker (Ø×H 84×113 mm), thermometer, sample holder, adapter, counterweights, a stainless steel 20 g sinker and a universal immersion basket for floating and sinking specimens. Can the set be used with existing KERN balances? The kit is designed to be compatible with all current KERN analytical balances and supports straightforward mounting and measurement routines. Is calibration available for traceability? An optional DAkkS calibration certificate is available for the sinker, providing documented values for density and volume where traceability is required. Manufacturer: KERN — Germany. Dealer contact: info@metav-werkzeuge.com | +49 2822 7131930
9 kg Load Corner for CT.3000/5000 Three-Point Stainless Steel - KERN
The robust combination of stainless-steel construction and precise compatibility with KERN CT.3000/5000-3Q1 ensures reliable load-cell alignment and long-term operational stability. Benefit from durable materials and straightforward integration for consistent weighing results. Order the CE.RQ35903 load corner directly via Metav Werkzeuge or ask our consultants if needed. CE.RQ35903 Load corner for CT.3000/5000-3Q1 — stainless steel mounting accessory by KERN The CE.RQ35903 load corner is a stainless-steel mounting accessory designed for secure attachment and precise alignment of load cells in industrial weighing modules such as the CT.3000 and CT.5000 series. Solid stainless-steel construction Compatible with CT.3000/5000-3Q1 scales Precision alignment for load cells Corrosion-resistant finish Built for dependable industrial weighing accuracy Constructed from stainless steel, this mounting corner is intended to maintain mechanical integrity in workshop and industrial environments where consistent weighing is essential. The rigid design reduces flex and unwanted movement around the weighing module, which directly supports precision in measured values and lowers the need for frequent recalibration. Where load-cell alignment matters, a stable mounting accessory contributes to repeatable results and predictable maintenance intervals, enhancing process reliability across production and quality-control workflows. Faster integration and reduced downtime for workshops The accessory is engineered for uncomplicated mounting with the CT.3000 and CT.5000 series, streamlining replacement or retrofit procedures. Reduced installation complexity shortens machine downtime and simplifies routine checks, enabling workshop staff to focus on production rather than lengthy setup tasks. The durable material choice and corrosion resistance extend service life in demanding conditions, which translates into longer intervals between part renewals and more efficient asset utilisation on the shop floor. Proven supply chain and precision partnership through Metav Sourcing precision accessories from a specialist distributor ensures traceable quality and consistent availability. Metav combines extensive product range and a European logistics base in Emmerich with expert selection criteria, providing a reliable supply of calibrated components and compatible parts. Using components manufactured by established names such as KERN supports compliance with industrial measuring routines and reinforces confidence in both installation and subsequent measurements. Choose Metav Werkzeuge for dependable supply and compatibility checks—contact our consultants in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to verify suitability and delivery options Technical Data Article number: CE-RQ SKU: CE.RQ35903 Manufacturer: KERN Material: stainless steel Suitable for: CT.3000/5000-3Q1 Category: Scales / Accessories Facts Weight: 9 kg ECLASS: 21131725 Special features Corrosion-resistant stainless-steel construction Designed for load-cell alignment and mounting Intended for industrial weighing applications Robust design for long service life FAQ Is this load corner compatible with CT.3000 and CT.5000 weighing modules? Yes. The CE.RQ35903 load corner is designed specifically for use with CT.3000/5000-3Q1 weighing modules and supports correct load-cell alignment. What material is the mounting accessory made from? The accessory is manufactured from stainless steel, providing corrosion resistance and mechanical stability for industrial environments. How heavy is the component and does that affect installation? The unit weighs 9 kg; its mass contributes to a stable mounting arrangement and should be considered during handling and installation. Will this accessory improve weighing repeatability? When correctly installed with the compatible weighing module, the CE.RQ35903 helps maintain load-cell alignment and structural rigidity, supporting consistent measurement repeatability. Can the component be used in corrosive workshop conditions? The stainless-steel construction offers enhanced resistance to corrosion, making it suitable for many workshop environments where moisture or mild chemical exposure is present. KERN
9 V 300 mA Universal External Power Adapter With EU/UK/US/CH Plugs, 100–240 V 50/60 Hz - KERN
Reliable 9 V / 300 mA output combined with a 100–240 V universal input and interchangeable international plug adapters supports uninterrupted use across workshops and while travelling; the compact, lightweight design keeps bench space clear and simplifies storage. Order the KERN YKA-03N directly via Metav Werkzeuge or ask our consultants for tailored advice. KERN YKA-03N — Universal external power adapter with 9 V / 300 mA output and multi‑plug set The KERN YKA-03N is a compact universal external power adapter designed for scales and precision instruments, providing a steady 9 V / 300 mA supply and interchangeable plugs for EU, UK, US and CH mains sockets. Universal input 100–240 V, 50/60 Hz Stable 9 V DC output at 300 mA Interchangeable EU/UK/US/CH plug adapters Compact and lightweight, approx. 0.08 kg Reliable compatibility for mixed‑fleet workshops The adapter offers true international compatibility, accepting 100–240 V at 50/60 Hz, which eliminates the need for separate supplies when using instruments across different regions. This wide input range reduces logistic complexity for service technicians and procurement teams, ensuring the same power solution can be used for a variety of precision devices. The result is fewer inventory items and a more consistent power profile for bench‑level equipment. Practical plug set and travel convenience Delivered with interchangeable EU/UK/US/CH plug adapters, the unit supports rapid redeployment in different markets without additional accessories. The compact casing and lightweight construction (approx. 0.08 kg) make it suited to mobile test benches and field service kits. For applications that require frequent relocation of instruments, the adapter provides a tidy, portable option that minimises downtime and transport costs. Stable supply for sensitive measuring devices Designed as an external power source for scales and similar measuring equipment, the adapter supplies 9 V at 300 mA, matching common input requirements for precision instruments. The consistent voltage and current specification helps to maintain measurement stability and reduces the risk of fluctuations that can affect calibration results. This makes the unit appropriate for laboratory benches, inspection rooms and industrial scales where repeatable readings are essential. Clear integration into workshop supply chains As a universal external adapter, the device integrates easily with existing instrument fleets and cabling standards. The compact footprint frees up bench space, while the included plug set avoids compatibility delays when deploying equipment to different countries. For purchasing departments, the standardised specification simplifies procurement and stock management, supporting smoother operations and fewer interruptions. Choose the KERN YKA-03N for dependable international compatibility and contact Metav Werkzeuge in Emmerich for personalised advice and fast dispatch—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: YKA-03N Manufacturer: KERN GTIN: 4045761210431 Country of origin: CN Commodity code: 85044090 Core technical data Input voltage: 100–240 V, 50 / 60 Hz Output: 9 V DC, 300 mA Weight: approx. 0.08 kg Special features External universal power adapter for scales and precision instruments Interchangeable plug adapters included: CH, EURO, UK, US Compact form factor for bench and mobile use FAQ Is this adapter suitable for KERN scales and other precision instruments? The KERN YKA-03N is intended as an external power supply for KERN scales and comparable precision instruments that require a 9 V / 300 mA input. Which plug types are included with the adapter? The delivery scope for the adapter includes interchangeable plug adapters for EU, UK, US and CH mains sockets to support international use. Can the adapter be used worldwide without a separate voltage converter? Yes. The universal input of 100–240 V, 50/60 Hz enables operation across standard mains voltages without an additional converter. How portable is the unit for field service work? With a compact design and a weight of approximately 0.08 kg, the adapter is well suited to mobile toolkits and service engineers who require a lightweight power option. What is the exact model designation to order or reference? Refer to the SKU YKA-03N and manufacturer KERN when ordering or checking compatibility. KERN — Origin: China; SKU: YKA-03N; GTIN: 4045761210431
Tailor weighing accessories to your workflow
Accessories for weighing systems turn a standard scale into a purpose-built tool for lab, industrial or retail use. Termed here as accessories, also described as scale add-ons or weighing attachments, the range covers both mechanical and electronic extensions that adapt scales to specific processes and handling needs.
Why these accessories matter in practice
They provide functional upgrades that improve accuracy, safety and data integrity. Mechanical parts such as ramps, trays and protective hoods reduce handling time and protect sensitive components, while electronic modules enable reliable data capture and system integration. In operations where repeatable documentation or mobile use is required, the right scale accessories are indispensable for consistent workflow performance.
Concrete advantages that save time and reduce risk
- Enhanced process reliability through interface converters and printers for automated data logging
- Improved ergonomics and loading speed via ramps and roller conveyors
- Reduced measurement disturbance with anti-vibration plates and pit frames
- Expanded use cases supported by hooks and shackles for hanging weighing and batteries for mobile operation
- Better hygiene and durability from protective hoods and rubber mats that shield the weighing electronics
Why Metav is the sensible partner for scale accessories
Metav stands for democratisation of precision and acts as a quality filter for the European market from Emmerich. With over 48,000 customers and a portfolio exceeding 250,000 products, Metav combines specialist know-how with broad availability so procurement teams can centralise suppliers without compromising on reliability. Choose Metav for consistent product quality, dependable supply and practical expertise in matching the right accessories to industrial requirements.
In short
Scale accessories increase the functional scope of a weighing system, optimising ergonomics, data flow and protection for sustained operation.
Technical overview
- mechanical add-ons: trays, ramps, roller conveyors, protective hoods, rubber mats
- stability components: anti-vibration plates, pit frames
- hanging weighing: hooks, shackles
- electronic modules: Bluetooth sets, printers, interface converters
- power and connectivity: batteries, data cables, converters
- operator aids: foot switches, loading ramps
FAQ
What compatibility should I check before selecting scale accessories?
Check the scale model and its available interfaces; many accessories require standard data ports or specific mounting footprints. The accessories range includes interface converters and data cables to bridge common differences between devices.
Can accessories improve measurement repeatability in an industrial environment?
Yes. Components such as anti-vibration plates and pit frames reduce external disturbances, while secure trays and ramps ensure consistent loading—both of which improve repeatability for weighing applications.
Are there mobility options among the accessories for mobile weighing tasks?
Batteries and portable mounting options turn stationary scales into mobile solutions. For mobile data capture, Bluetooth sets and compact printers are common scale add-ons.
How do accessories support quality assurance and traceability?
Printers, interface converters and data cables enable direct documentation and integration with quality systems, ensuring weight data is recorded and traceable for audits and process control.
Which accessories enhance operator safety and ergonomics?
Ramps, roller conveyors and foot switches reduce manual lifting and handling, while protective hoods and rubber mats protect both operator and equipment during routine use.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com