Reliable scales for precise industrial weighing
Scales are essential for accurate weight determination in production, laboratory and shipping environments, providing clear benefits in process control, quality assurance and legal compliance. A well-chosen scale delivers the required weighing range and readability while ensuring repeatable results for tasks such as quality control, recipe formulation or parcel handling, and integrates features like tare, counting and data export to streamline workflows. Consideration of environmental influences, routine calibration or legal verification and sturdy construction for heavy-duty use ensures consistent performance with precision scales, platform scales and counting scales.
50h Rechargeable Internal Battery Up to 50 h Runtime, 12 h Charge Time - KERN
Benefit from extended mobile operation with a WTB-A01N internal rechargeable battery pack that delivers up to 50 h of continuous use and recharges in approximately 12 h; the compact 0.68 kg design reduces installation impact and supports uninterrupted weighing tasks. Order the internal battery pack directly via Metav Werkzeuge or ask our consultants if technical clarification is required. WTB-A01N internal rechargeable battery pack by KERN — up to 50 h runtime, 12 h charge time the WTB-A01N is an internal rechargeable battery pack for KERN scales, engineered to provide extended mobile operation for laboratory and industrial weighing applications Up to 50 h operating time Approx. 12 h charge time Internal rechargeable battery pack Compact design, only 0.68 kg Longer running cycles for uninterrupted weighing The internal rechargeable battery offers a significant extension of mobile operating time, with a runtime of up to 50 h under conditions without backlighting. This extended autonomy reduces interruptions during prolonged measurement tasks and minimises dependence on mains power, which is particularly useful for inspection rounds, off-site checks and production sampling. The described runtime is a practical indicator for shift planning and contributes directly to process reliability and throughput. Predictable recharge time to support shift planning With a standard charge time of around 12 h, the unit enables predictable scheduling for recharging cycles and maintenance windows. The defined charging behaviour means power management can be integrated into existing workflows without unexpected downtime. Where backlight use is required, the available operating time will be reduced accordingly; this cause-and-effect relationship should be considered when planning continuous operation in illuminated-display scenarios. Compact design and installation-friendly weight Weighing only 0.68 kg, the pack is compact and designed for internal installation in compatible weighing instruments. Its modest mass minimises mechanical stress on housings and simplifies handling during service interventions. As an accessory from KERN, the battery pack is specified for use with matching scale models and is supplied as a factory-aligned power solution to maintain measurement stability and certified performance. Practical advantages for procurement and production Choosing an internally mounted rechargeable power source reduces the number of external cables and external battery carriers, contributing to a tidier workstation and fewer intervention points. The technical characteristics support a rational decision-making process focused on operational continuity and maintenance simplicity. For professional workshops and industrial environments that require robust weighing uptime, the pack represents a targeted upgrade to existing KERN weighing equipment. Contact Metav Werkzeuge in Emmerich for compatibility checks, further technical data or purchasing support via info@metav-werkzeuge.com, by phone on +49 2822 7131930 or WhatsApp at +49 170 2837271 Technical data Article number: WTB-A01N Manufacturer: KERN GTIN: 4045761146457 Commodity code: 85072080 Country of origin: CN Numbers Weight: 0.68 kg Charge time: 12 h Operating time: up to 50 h (without backlight) eClass: 21059207 Special features Internal rechargeable battery pack Designed for use with KERN weighing instruments Compact, installation-friendly format FAQ Is this battery compatible with KERN scales? The WTB-A01N is specified as an internal rechargeable battery pack for KERN weighing instruments (SKU WTB-A01N) and is intended for use with compatible KERN models. How long does the battery take to recharge fully? A full recharge requires approximately 12 hours under standard charging conditions specified for the WTB-A01N. What operating time can be expected during typical use? Operating time is stated as up to 50 hours without backlight; using the display backlight will shorten the runtime proportionally. How heavy is the battery and does it affect installation? The unit weighs 0.68 kg, a compact mass that minimises installation impact and simplifies handling during maintenance. Metav Werkzeuge, Emmerich am Rhein, eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271
50mm Stand For IXS Models Compatible With 300x240x86mm To 650x500x133.5mm Platforms - KERN
Take advantage of the combination of compact 50 mm profile, broad platform compatibility and easy handling thanks to its 1.8 kg net weight; ensure stable positioning for shop-floor and laboratory weighing tasks. Order the stand directly via Metav Werkzeuge or consult our product specialists for specification matching. IXS-A01 Stand for KERN scales — 50 mm low profile, workshop compatible A IXS-A01 stand engineered to provide a low, stable support platform for weighing equipment, intended for integration with compatible weighing plates and accessories in industrial and laboratory settings Low 50 mm profile for compact setups Compatible with weighing plates 300×240–650×500 mm Lightweight 1.8 kg for simple handling Manufactured by KERN Space-saving stability for everyday weighing tasks A low-profile support contributes directly to consistent measuring conditions by reducing unnecessary elevation and producing a predictable support plane. The 50 mm height keeps the instrument close to the bench, which minimises centre-of-gravity shifts and eases access during routine operations. This compact design supports efficient workflows in environments where bench space is at a premium and repeated placement is required, translating into fewer interruptions and more reliable measurement cycles. Broad compatibility eases equipment planning and integration Designed to accept weighing plates with dimensions from 300×240×86 mm up to 650×500×133.5 mm, the stand simplifies equipment selection by covering a wide range of platform sizes. This compatibility reduces the need for custom adapters and helps standardise installations across multiple workstations. The stand’s 1.8 kg construction balances portability with sufficient mass for stable positioning, making it suitable for both fixed benches and mobile test setups where quick reconfiguration is needed. Proven manufacturer quality and practical procurement Supplied by KERN, the stand benefits from established production and quality control processes; identification is available via GTIN: 4045761199736 and SKU IXS-A01 for straightforward ordering and inventory management. Choosing components that fit existing platforms reduces installation time and inventory complexity. Metav Werkzeuge’s proximity and quality-filtered stock ensure reliable delivery and support, helping maintain uninterrupted metrology operations across workshops and service centres. Contact Metav Werkzeuge for tailored compatibility checks and secure supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for concise technical advice and order facilitation Technical data Manufacturer: KERN SKU: IXS-A01 GTIN: 4045761199736 Origin: CN Commodity code: 73269098 Facts Height: 50 mm Weight: 1.8 kg Compatible plate sizes: 300×240×86 mm – 650×500×133.5 mm ECLASS: 21170601 Special features Accessory for scales and weighing systems Designed for integration with a range of weighing platforms Compact footprint for bench-top use FAQ What weighing plate sizes are supported by the stand? The stand supports weighing plates with dimensions from 300×240×86 mm up to 650×500×133.5 mm, ensuring flexible use with many common platforms. Is the stand heavy enough to provide stable support? With a net weight of 1.8 kg, the IXS-A01 stand provides a practical balance of portability and stability for routine weighing setups. Who manufactures the stand and how can it be identified? The product is manufactured by KERN and can be identified by SKU IXS-A01 and GTIN 4045761199736 for ordering and inventory purposes. Can the stand be used in laboratory and workshop environments? Yes; the low 50 mm profile and compact footprint make it suitable for both laboratory benches and industrial workshop workstations. Where can procurement advice be obtained for matching the stand to existing equipment? Metav Werkzeuge offers specification guidance and compatibility checks to help match the stand to existing weighing platforms and systems. Manufacturer: KERN — Origin: CN — GTIN: 4045761199736
52 mm Display Precision Indicator Stainless Steel IP65 With Checkweighing, Analog Output Optional - KERN
Take advantage of the combination of robust stainless-steel construction, a highly legible 52 mm LCD display and versatile connectivity options for reliable weighing and smooth production control. Order the indicator directly via Metav Werkzeuge or consult our specialists for application advice. KFN-TM stainless-steel weighing indicator with 52 mm LCD display — KERN The KFN-TM is a stainless-steel weighing indicator designed for industrial scales and process control, suitable for table or wall mounting in harsh production environments. Stainless-steel housing with IP65 protection Large 52 mm LCD digits for easy reading Optional analogue output for PLC control KERN Communication Protocol for ERP integration Built to withstand industrial conditions and simplify handling The indicator combines a stainless-steel enclosure with IP65 dust and splash protection, delivering a durable front for food, chemical or workshop environments where regular cleaning is required. The LCD display with 52 mm digit height provides clear visual feedback even from a distance, which reduces operator error and speeds up decision-making on production lines. With a compact footprint of 265.5×164.5×96 mm and a weight of 2.5 kg, the unit supports flexible placement while maintaining a professional, corrosion‑resistant finish that conveys long-term value. Functions that increase throughput and reduce errors Integrated functions such as the CAL adjustment programme, checkweighing with tolerance zones and a summation feature support quality control and batch documentation. The indicator also offers piece counting with predefined reference quantities (10, 20, 50, 100, 200) and a hold function that calculates a reliable mean value under unstable weighing conditions. These capabilities turn raw measurements into actionable data, reducing rework and improving throughput by delivering consistent, reproducible results without the need for separate processing equipment. Connectivity and control for automated workflows Designed for system integration, the unit supports the KERN Communication Protocol (KCP) to link directly to warehouse management or ERP systems, enabling automated data logging and traceability. An optional analogue output is available for direct control of PLCs and peripheral equipment; note that the analogue module is not retrofit-capable and cannot be used in combination with a signal lamp, and its installation disables the RS-232 interface. The indicator holds EU type approval, making it suitable for legal-for-trade applications where compliance is required. Flexible power and mounting options for different setups The indicator includes a mains plug-in power supply with adapters for CH, EURO, UK and US outlets, plus a choice of an internal battery option for temporary mobile use (battery charging time approx. 12 h). A table foot is supplied and a wall bracket is included for permanent installation, allowing adaptation to bench, terminal or wall‑mounted stations. Operating capability from −10 °C to 40 °C ensures reliability in a broad range of workshops and production halls, while stainless construction and thoughtful mounting choices simplify installation and maintenance routines. Contact Metav Werkzeuge in Emmerich for tailored advice and fast supply of KERN weighing indicators — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: KFN-TM SKU: KFN-TM GTIN: 4045761194427 Manufacturer: KERN Origin: CN Facts Weight: 2.5 kg Dimensions (W×H×D): 265.5×164.5×96 mm Display digit height: 52 mm Operating temperature: −10 °C to 40 °C Power supply: 110 V–230 V AC Battery charge time (if fitted): 12 h Special features Material: Stainless steel Protection class: IP65 (dust and splash protection) Display type: LCD Adjustment programme: CAL Weighing functions: Checkweighing, summation, hold function Piece counting with reference values: 10, 20, 50, 100, 200 Communication: KERN Communication Protocol (KCP) Optional analogue output (not retrofittable; incompatible with signal lamp) EU type approval Table foot and wall bracket included Mains adapter included with CH/EU/UK/US plugs RS-232 disabled if analogue module installed Optional internal battery available FAQ What mounting options are available for this indicator? The KFN-TM weighing indicator can be supplied with a table foot for bench use and a wall bracket for permanent wall mounting, enabling flexible installation in production and inspection areas. Can the indicator be integrated into an ERP or PLC system? Yes. The indicator supports the KERN Communication Protocol (KCP) for ERP integration and offers an optional analogue output for PLC control; note the analogue module is not retrofittable and disables RS-232 if installed. Is the unit suitable for legal-for-trade applications? The unit has EU type approval, making the KERN KFN-TM suitable where legal-for-trade compliance is required. Which materials and environments is the indicator designed for? Constructed from stainless steel with IP65 protection, the indicator is designed for dusty or splash-prone environments, including workshops, food processing and light industrial applications. What weighing functions help with production control? The indicator provides adjustment via the CAL programme, checkweighing with tolerance zones, summation, piece counting with preset reference quantities and a hold function to stabilise readings under unsteady conditions. KERN — Origin: CN — Contact details not provided
Antivibrationsplatte
Die Antivibrationsplatten KERN YPS-04, -05, -06 sind dafür konstruiert, Erschütterungen und Schwingungen zu dämpfen, die sonst das Wägeergebnis von hochpräzisen Präzisions- und Analysenwaagen verfälschen würden. Ideal auch zum vibrationsfreien Aufstellen von Mikroskopen geeignet Die Antivibrationsplatte besteht aus poliertem Granit, die auf absorbierenden Gummielementen gelagert sind An der Antivibrationsplatte kann ergonomisch optimiert im Stehen oder bequem im Sitzen gearbeitet werden Kompakte Abmessungen, vorteilhaft bei eingeschränkten Platzverhältnissen Alle Oberflächen sind hygienisch und leicht zu reinigen Passend für alle KERN Analysenwaagen, Präzisionswaagen und Mikroskope mit den entsprechenden Abmessungen Nettogewicht ca.: YPS-04: 30 kg YPS-05: 35 kg YPS-06: auf Anfrage Versandbereit in 2 Tagen. Versand komplett auf Palette. Maße, Bruttogewicht, Versandkosten bitte anfragen
57mm Matrix Dot Impact Printer 1.8 L/S 40 Char Per Line, EU Power Adapter - KERN
Take advantage of a compact, reliable printing solution with dot matrix technology, fast line throughput and a universal 100–230 V plug-in power supply for seamless integration into weighing and lab setups. Order the unit directly via Metav Werkzeuge or contact our consultants for compatibility advice. Matrix dot matrix printer – compact receipt printer with 40-character line and 57 mm paper width (KERN) Matrix dot matrix printer provides robust, low-maintenance printing for scales and laboratory equipment, ideal for roll receipts and simple data output. Dot matrix printing technology 40 characters per line capacity 57 mm paper roll width Compact dimensions 100×180×106 mm Robust printing for continuous workflows This compact unit uses dot matrix technology to deliver legible receipts and logs where longevity and tamper-evident printing matter. With a throughput of 1.8 lines/s, the mechanism is optimised for frequent, short receipts typical in weighing and goods-in processes. The device is housed in plastic for lightness and portability while retaining a solid build for routine industrial use. The clear line length of 40 characters allows predictable layout for numeric results, timestamps and identifiers, reducing post-print formatting on labels or folders. Simple integration with scales and peripherals Designed as an accessory for scale and measurement systems, the printer accepts a standard 57 mm paper roll and runs from a 100–230 V plug-in power supply with an EU adapter included. Interface cabling is not supplied, enabling integrators to select the most suitable connection for each installation; this choice supports flexible system topologies and avoids redundant cable types. The unit’s compact footprint (100×180×106 mm) and light weight (0.75 kg) facilitate mounting near workbenches or inside housings without significant space or load implications. Clear purpose, low-maintenance operation The mechanism’s straightforward design focuses on reliability and easy upkeep: consumables are limited to ribbon and thermal-stable paper, and the dot-matrix head tolerates intermittent operation and varied print loads. Originating from Japan, the product reflects consistent manufacturing quality and is particularly suited for environments where long-term availability and predictable output are priorities. Its supported print format and mechanical durability make the device a practical choice for repetitive documentation tasks in production, logistics and laboratory settings. For precise printing alongside KERN weighing equipment, contact Metav Werkzeuge in Emmerich for tailored advice and to confirm system compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 911 SKU: 911-013 Manufacturer: KERN GTIN: 4045761016408 Origin: JP ECLASS: 19140105 Facts Dimensions: 100 × 180 × 106 mm Weight: 0.75 kg Printable characters per line: 40 Paper roll width: 57 mm Print speed: 1.8 lines/s Input voltage: 100 V – 230 V Special features Printing method: dot matrix Material: plastic Power supply: plug-in power supply (EU adapter included) Interface cable: not included Commodity code: 84239010 FAQ What printing method does the unit use and for which tasks is it suited? The unit uses dot matrix printing, ideal for durable receipts and basic logs in weighing, dispatch and lab documentation where lasting legibility and low running costs are required. Is the power supply included and what voltage range is supported? A plug-in power supply with an EU adapter is included; the device supports an input range of 100–230 V, enabling operation across common mains standards. Does the printer come with connection cables for scales? The printer is supplied without interface cables so that system integrators can select the correct connector type for each scale or controller. Can the device be mounted on or near a bench without special supports? Yes. With compact dimensions of 100×180×106 mm and a weight of 0.75 kg, the unit is suitable for bench-top placement or enclosed mounting with basic fixation. Which manufacturers and systems is the printer intended to complement? The printer is supplied by KERN and is designed for integration with weighing and measurement equipment commonly used in industrial and laboratory settings. KERN, Origin: JP, GTIN: 4045761016408
57mm Receipt Paper Roll 55mm Diameter 26m Length 10-Pack - KERN
Take advantage of the combination of printer compatibility, consistent print quality and extended roll length for uninterrupted documentation; order the paper rolls directly via Metav Werkzeuge or ask our consultants if needed Paper rolls 911-013-010 — Paper rolls for KERN printers, 57 mm width The Paper rolls 911-013-010 are standard printer rolls intended for use with compatible KERN printing devices, offering reliable media handling for weighing and receipt applications Compatible with KERN 911-013 printer 57 mm paper width for standard receipts 26 m roll length for prolonged use 55 mm roll diameter fits common holders Efficient documentation with reliable media These printer rolls deliver a dependable media format that supports clear and legible printing for weighing and labelling workflows. With a 57 mm paper width and a 26 m length per roll, the design reduces the frequency of media changes and helps maintain continuous operation in busy environments. The specified roll diameter 55 mm ensures compatibility with common printer holders, which maintains consistent paper feed and minimises jamming. This focus on operational efficiency supports predictable process throughput and reduces administrative interruptions. Less downtime, easier stock planning Longer roll length and industry-standard dimensions translate into fewer interruptions for replenishment and a simplified inventory approach. The consistent media format supports predictable consumption rates, aiding logistics and ordering cycles. Where traceability and continuous print output are required, these rolls contribute to sustained print runs and lower handling time for staff. The compatibility with KERN devices further ensures straightforward replacement without adjustments to printer settings, improving overall workflow reliability. Quality sourcing and dependable supply Sourced with a clear origin in Germany, these paper rolls are part of a supply chain that benefits from Metav Werkzeuge’s role as a quality filter for the European market. Metav’s established presence in Emmerich combines a broad product range with transparent fulfilment processes, which supports uninterrupted provision of consumables for industrial and trade customers. The combination of standardised dimensions and dependable sourcing underpins both operational continuity and procurement confidence for businesses that rely on consistent print output and stock replenishment. Contact Metav Werkzeuge to secure KERN-compatible paper supplies and ensure continuous operation from our Emmerich warehouse — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 911-013-010 Manufacturer: KERN SKU: 911-013-010 GTIN: 4045761127135 Facts Paper width: 57 mm Roll diameter: 55 mm Roll length: 26 m Weight: 1.2 kg Tariff number: 84239010 Special features Compatible with KERN 911-013 printer Pack contents: 10 pieces Product category: Waagen › Zubehör eClass: 24260490 Origin: DE FAQ What printers are these rolls compatible with? The paper rolls 911-013-010 are specified for compatibility with KERN printing units, explicitly matching the KERN 911-013 model and similar devices designed for 57 mm media. What are the key dimensions of the rolls? Dimensions for the 911-013-010 rolls include a 57 mm paper width, 55 mm roll diameter and a roll length of 26 m, suited to standard receipt and weighing printer holders. How do these rolls affect printer downtime? By providing a longer roll length and standard dimensions, the 911-013-010 paper rolls reduce changeovers and help maintain consistent print runs, contributing to lower downtime in continuous operations. Can these rolls be stored easily in workshops? Yes; the 911-013-010 rolls use a common format that supports compact storage and straightforward rotation, aiding inventory management in workshop and industrial settings. Where do these paper rolls come from? The 911-013-010 paper rolls originate from Germany and are distributed via Metav Werkzeuge’s logistics, which focuses on reliable supply for industrial consumables. Manufacturer: KERN — Address: Germany — Contact: not provided
58/70/76mm Dot-Matrix Receipt Printer For Scales Fast 4.7 Lps, Auto Cutter, EURO Adapter - KERN
Take advantage of fast, reliable printing together with plain‑paper archiving and an automatic cutter for streamlined weighing documentation; order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. YKG-01 dot‑matrix printer by KERN — 4.7 lines/s, automatic cutter The YKG-01 is a compact dot‑matrix printer for retail, hospitality and kitchen environments, designed to print weighing results on plain paper for reliable, long‑term archiving. Fast dot‑matrix print at 4.7 lines/s Prints weighing values on plain paper Built‑in automatic paper cutter Interchangeable interface, cable not included Dependable output for retail and catering operations The unit delivers consistent impact printing that is optimised for the frequent, short receipts typical in shops and kitchens. With a rated speed of 4.7 lines/s and a maximum of 42 characters per line, the mechanism ensures legible, evenly spaced output that suits both immediate transaction needs and longer‑term record keeping. Using plain paper instead of thermal rolls reduces running costs and enables simple archival procedures, while the printer’s robust construction resists the knocks and humidity common in catering environments. Simple integration and low‑effort maintenance Engineered for straightforward connection in point‑of‑sale setups, the model provides an interchangeable interface to match existing systems; note that the interface cable is not included. The supplied EU power adapter supports 230 V AC, 50 Hz supplies, and the plug‑in power design keeps replacement simple. Routine consumable changes are fast: the design allows easy paper and ribbon replacement without specialised tools, reducing downtime and keeping staff focused on service rather than maintenance. Archive‑ready receipts and controlled operating range Because the printer produces records on plain paper, documents withstand longer storage and are compatible with conventional filing systems. The integrated automatic paper cutter gives a clean finish to each slip, improving handling and reducing errors when collecting multiple receipts. For reliable use, the device is specified for operation between 5 °C and 35 °C, and its compact footprint suits busy counters and compact kitchen stations, contributing to an orderly, compliant documentation workflow. Contact Metav Werkzeuge for an expert recommendation on integrating the KERN YKG‑01 into the workflow and to arrange supply directly from our Emmerich warehouse – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: YKG SKU: YKG-01 Manufacturer: KERN Origin: JP GTIN: 4045761253056 Facts Dimensions: 160 x 248 x 139 mm Weight: 2.71 kg Print speed: 4.7 lines/s Max characters per line: 42 Power input: 230 V AC, 50 Hz Paper widths: 58, 70, 76 mm Operating temperature: 5 °C–35 °C Special features Printing method: impact (dot‑matrix) Power supply: EURO plug‑in adapter Built‑in automatic paper cutter Interchangeable interface (cable not included) Designed for plain‑paper receipt archiving FAQ How does the YKG‑01 handle receipt archiving? The KERN YKG‑01 prints on plain paper, producing durable receipts suitable for standard filing and longer retention periods. Is an interface cable included with the printer? No, the printer is supplied with an interchangeable interface but the interface cable is not included and must be provided separately. What power supply is required for the unit? The unit uses a 230 V AC, 50 Hz supply and is shipped with a EURO plug‑in adapter. Can the printer be used in a kitchen environment? Yes, the design and impact printing method make it suitable for retail and catering settings; operating conditions should remain within 5 °C–35 °C. What makes this model suitable for point‑of‑sale systems? Its compact size, fast 4.7 lines/s output, automatic paper cutter and interchangeable interface facilitate simple integration into POS workflows. Metav Werkzeuge — Emmerich (warehouse and quality hub); Contact: info@metav-werkzeuge.com; Tel: +49 2822 7131930; WhatsApp: +49 170 2837271
5Kg-50Kg Elastomer Mount With Lift-Off Protection For CB-Q1, Stainless Steel - Kern
Take advantage of the combination of reliable vibration damping, integrated lift‑off protection and robust stainless steel construction for steady weighing results and long service life. Order the component directly via Metav Werkzeuge or consult our advisors for application support. Elastomer Mount CE.Q30904 — elastomer bearing with lift‑off protection for CB‑Q1, stainless steel The Elastomer Mount is a vibration‑isolating bearing with integrated lift‑off protection, designed to secure CB‑Q1 load cells in industrial weighing applications. Stainless steel body for corrosion resistance Integrated lift‑off protection for stable zeroing Capacity range 5–50 kg for diverse scales Compatible with CB‑Q1 load cells and modules Ensuring stable readings through vibration damping and lift‑off protection The elastomer element provides targeted vibration damping, reducing measurement noise that can affect repeatability in production environments. Combined with the lift‑off protection, the assembly prevents partial unloading that would otherwise cause erroneous zero shifts during handling or during fast load changes. These design choices deliver measurable improvements in precision and repeatability for weighing systems where consistent results are required. Durable stainless steel construction for industrial use A stainless steel housing protects the internal elastomer from contamination and corrosion, supporting long maintenance intervals and predictable lifetime performance. The compact mass of approximately 0.5 kg simplifies mechanical integration while contributing to the mount’s robustness, making it suitable for continuous operation on workshop and factory scales where mechanical resilience matters. Straightforward mechanical integration with CB‑Q1 load cells Designed for direct use with CB‑Q1 load cells, the mounting enables quick assembly into existing weighing modules and platform systems. The geometric interface and securing features reduce installation time and the need for extensive mechanical adjustment. Clear mechanical compatibility accelerates commissioning and helps maintain measurement integrity across multiple scales in a production line. Clear performance envelope and typical applications Rated for loads from 5–50 kg, the mount suits small to medium weighing platforms, counting scales and laboratory‑adjacent industrial units where controlled measurement behaviour is essential. The lift‑off safeguard mitigates common errors during part placement or transfer, while the elastomer layer maintains stable readings under typical shop‑floor vibrations. This combination supports reliable process control and quality checks in weighing applications. Discuss selection and delivery with Metav Werkzeuge in Emmerich: contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice on the Kern elastomer mount Technical data Article number: CE.Q30904 Manufacturer: Kern Material: Stainless steel Weight: 0.5 kg Suitable for: CB‑Q1 Category: Messzellen (Waagen > Messzellen) Core specifications Load capacity: 5–50 kg Weight: 0.5 kg eClass: 21130606 Special features Lift‑off protection Elastomer damping element Corrosion‑resistant stainless steel housing Designed for scales and load cell applications Compatibility with CB‑Q1 load cells FAQ What load range does the elastomer mounting support? The elastomer mounting CE.Q30904 is specified for a load range of 5–50 kg, providing reliable performance across small to medium weighing platforms. Is the mount suitable for corrosive environments? The housing is made of stainless steel, giving the CE.Q30904 enhanced resistance to corrosion and making it suitable for many industrial environments. Can this mount be used with other load cell series? The mount is designed for compatibility with CB‑Q1 load cells; adaptations for other series may require mechanical verification of the interface. How does the lift‑off protection improve weighing results? Integrated lift‑off protection prevents partial unloading of the measuring element, which reduces zero drift and ensures more consistent readings during handling or quick load changes. Who manufactures this elastomer mount and where can it be sourced? The part is manufactured by Kern and is distributed by Metav Werkzeuge; the item is listed under SKU CE.Q30904 for ordering and specification checks. Manufacturer: Kern; Distributor/supplier: Metav Werkzeuge, Emmerich am Rhein · Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271
5pcs Protective Hood for FOB-NS, Accessory for Scales - KERN
Reliable protection in a compact, lightweight set: the KERN protective hood FOB-A12S05 delivers workshop-ready shielding and compatibility with FOB‑NS indicators while keeping spare covers simple to stock—order directly via Metav Werkzeuge or consult our specialists for specification checks. Protective Hood FOB-A12S05 — KERN, pack of 5 for FOB‑NS Protective Hood FOB-A12S05 is a lightweight accessory designed to shield FOB‑NS weighing indicators from dust and incidental spills in industrial and workshop environments. Pack of five protective hoods Compatible with FOB‑NS indicators Lightweight design (0.08 kg) Fast dispatch from Emmerich warehouse Extend instrument life with dependable shielding The protective hood is a practical, economy‑minded solution that reduces particulate ingress and the risk of accidental splashes on sensitive weighing electronics. By preventing contamination of control surfaces and connectors, the accessory lowers maintenance frequency and helps avoid costly calibration downtime. Compatibility with FOB‑NS indicators ensures a precise fit; the compact profile and lightweight construction mean minimal additional load on storage and handling systems. Streamline workshop logistics with spare coverage Supplied as a pack of five, the set is designed for routine replacement and efficient workshop stocking. Multiple covers allow staggered changeover without interrupting measurement workflows, supporting continuous operation in production or quality control. The small bulk and low weight support consolidated procurement processes, reducing administrative overhead while maintaining readiness. Metav’s distribution from Emmerich provides a reliable channel for replenishment and inventory planning. Practical handling and ordering clarity for procurement The hood is positioned as an accessory within the scales product group, enabling clear categorisation in purchasing systems and spare‑parts lists. Identification via SKU and GTIN simplifies ordering and inventory control: use the SKU when reordering to ensure the correct accessory. The design supports quick exchange and minimal adjustment time, which keeps throughput steady in busy measurement stations and reduces overall process disruption. Order KERN protective hood FOB-A12S05 through Metav Werkzeuge for dependable spare covers shipped from Emmerich—reach our consultants via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: FOB-A12S05 Manufacturer: KERN SKU: FOB-A12S05 GTIN: 4045761184633 Facts Weight: 0.08 kg Commodity code: 39269097 Pack contents: 5 pieces Special features Compatibility: FOB‑NS indicators Product group: Accessories for scales Category path: Waagen > Zubehör Origin: CN FAQ What does the protective hood protect against? The KERN protective hood FOB‑A12S05 shields weighing indicator surfaces and connectors from dust and incidental splashes, reducing contamination and maintenance needs. Is the hood compatible with my FOB‑NS indicator? Yes, the accessory is specified for compatibility with FOB‑NS indicators; reference the SKU FOB‑A12S05 when ordering to ensure the correct fit. How is the product supplied for workshop use? The item is supplied as a pack of five protective hoods, allowing scheduled replacement and simplified stock management for continuous operation. How can the hood be identified for procurement? Use the SKU FOB‑A12S05 or the GTIN 4045761184633 to identify the exact accessory in ordering and inventory systems. KERN — Origin: CN — Contact via Metav Werkzeuge: info@metav-werkzeuge.com · +49 2822 7131930
5‑Piece Protective Cover For PNS.600‑3 Keyboard And Housing - KERN
For reliable, low-effort protection of sensitive scale controls, choose the lightweight KERN PNJ-A01S05 protective cover: supplied as a five-piece set and made to shield the keyboard and housing of the PNS.600-3 — order directly via Metav Werkzeuge or consult our specialists for fit and logistics. PNJ-A01S05 Protective Cover for PNS.600-3 — KERN, pack of 5 A PNJ-A01S05 protective cover designed for the KERN PNS.600-3, providing targeted protection for keyboard and housing in workshop and laboratory settings Protective cover for keyboard and housing Compatible with PNS.600-3 scales Supplied as a set of 5 Lightweight: approx. 0.02 kg each Reduce downtime with targeted component protection The protective cover is engineered to sit over the keyboard and housing, preventing ingress of dust and light contaminants that can cause wear or require frequent cleaning. Supplied as a pack of 5, the set supports routine replacement cycles and spare provisioning, which promotes continuity of operation. For workshop managers seeking measurable benefits, the accessory offers a straightforward way to lower maintenance intervals and preserve the functional integrity of weighing equipment without complex retrofitting. Practical supply and simple stock management for workshops Delivered in a multi-piece set, this accessory simplifies procurement for production floors and service teams. The five-piece configuration allows rotation between devices and ensures replacements are available when needed; this supports efficient inventory control and reduces ad hoc downtime. Availability through Metav Werkzeuge benefits from centralised logistics and a broad product range, enabling rapid restocking and consistent supply for scale accessory needs. Easy handling and clear compatibility for everyday use Compatibility with the PNS.600-3 scale series is specified, enabling immediate deployment on matching units. At approximately 0.02 kg per item, the cover is lightweight and easy to fit, so fitment requires minimal handling time and no special tools. The result is reliable protection with negligible impact on workflow, providing workshop staff with practical peace of mind and a simple method to protect sensitive control interfaces during routine operations. Secure a ready supply of KERN PNJ-A01S05 protective covers via Metav Werkzeuge for consistent workshop protection — enquiries and order details available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: PNJ-A01S05 Manufacturer: KERN GTIN: 4045761185470 Country of origin: CN Core facts Weight: 0.02 kg Commodity code: 39269097 ECLASS: 24322502 Pack quantity: 5 pieces Special features Protection for keyboard and housing Compatible with PNS.600-3 scales Product category: Scales accessory — protective covers Category path: Waagen › Zubehör FAQ Is this cover compatible with the PNS.600-3 scale series? Yes. The PNJ-A01S05 protective cover is specified for use with the PNS.600-3 range and fits the keyboard and housing configuration of that model. How many covers are supplied in one set? The product is supplied as a set of five covers, allowing for immediate replacements and simple stock rotation. What protection does the cover provide? The cover protects the keyboard and housing from dust and light contamination, reducing the need for frequent cleaning and helping to maintain normal operation. What is the weight of each cover? Each PNJ-A01S05 protective cover weighs approximately 0.02 kg, making it easy to handle and fit during routine maintenance. Manufacturer: KERN — Country of origin: CN
≤10t Accessory for CR-Q1, Galvanised Steel - KERN
Take advantage of a robust, corrosion-resistant accessory that supports nominal loads up to ≤10 t while ensuring reliable compatibility with the CR‑Q1 scale; order directly via Metav Werkzeuge or consult our specialists for specification support. CE.Q42901 accessory for CR‑Q1 — galvanised steel, rated ≤10 t (KERN) A durable CE.Q42901 accessory designed as a dedicated attachment for the KERN CR‑Q1 industrial scale, engineered for heavy-duty weighing tasks in workshop and industrial environments. Galvanised steel construction Compatible with CR‑Q1 scale Rated for nominal load ≤10 t Compact mass: 6 kg Secure load handling for heavy-duty weighing The accessory is specified for a nominal load ≤10 t, which provides a clear safety and performance envelope when paired with industrial scales. Constructed from galvanised steel, the component keeps mechanical deformation and measurement disturbance to a minimum, enabling stable readings under heavy loads. By defining the load capacity explicitly, operational planners can match lifting and weighing routines to the accessory’s rated limits and preserve the integrity of the scale system. Designed to withstand workshop conditions The attachment’s galvanised steel finish offers a corrosion-resistant surface that extends service life in industrial and semi-exposed environments. At a weight of 6 kg, the unit remains manageable for integration and handling while contributing minimal additional inertia to the installation. The robust material choice reduces maintenance cycles and supports predictable downtime planning, which benefits production throughput and long-term asset management. Straightforward integration with existing scale systems Engineered as a purpose-made accessory for the CR‑Q1 family, mechanical interfaces and fitment are designed to maintain compatibility with the host device, simplifying installation and reducing commissioning time. The clear definition of the accessory’s load class and materials supports technicians in verifying conformity with workplace safety rules and integrating the part into existing load measurement chains without extensive modification. Proven supply and specification support from Metav Sourcing precision components through an established distributor improves procurement reliability. Metav’s position as a quality filter for the European market, combined with a large warehouse in Emmerich, supports consistent availability and traceable goods flow. For operations that require dependable supply and specification clarity, the combination of branded components from KERN and Metav’s fulfilment infrastructure strengthens both operational planning and regulatory documentation. Contact Metav Werkzeuge in Emmerich for technical clarification, compatibility checks and prompt supply of the KERN CE.Q42901 accessory Technical data Article number: CE.Q42901 Manufacturer: KERN Product type: Accessory for CR‑Q1 Facts Weight: 6 kg Nominal load: ≤10 t ECLASS: 21131725 Special features Material: Steel, galvanised Compatibility: for CR‑Q1 Category: Zubehör / accessory FAQ What is the maximum load capacity of this accessory? The CE.Q42901 accessory for the KERN CR‑Q1 is specified for a nominal load of ≤10 t. Which material is used and how does it perform in humid environments? The unit is made from galvanised steel, which offers a corrosion-resistant surface suitable for typical workshop atmospheres. Is the accessory directly compatible with the CR‑Q1 scale range? Yes, the accessory is designed for integration with the CR‑Q1 scale family and maintains mechanical compatibility. What is the mass of the accessory and how might that affect installation? The accessory has a mass of 6 kg, which keeps handling and installation straightforward while keeping added inertia low. Metav Werkzeuge, Emmerich am Rhein — info@metav-werkzeuge.com — +49 2822 7131930
6 V 1.2 Ah Rechargeable Internal Battery, Up to 20h Runtime - KERN
Reliable internal power for weighing instruments with a compact lead‑acid design: 6 V / 1.2 Ah capacity and up to 20 h runtime without backlight, plus a standard 12 h recharge cycle and a lightweight 0.3 kg housing for straightforward installation. Order directly via Metav Werkzeuge or consult our advisers for compatibility and procurement guidance. KFB-A01 Internal rechargeable battery (6 V, 1.2 Ah) by KERN The KFB-A01 is an internal lead‑acid rechargeable battery designed as a power supply for precision scales and weighing modules, providing extended portable operation and reliable backup power in workshop and industrial environments. Internal rechargeable lead-acid battery 6 V 1.2 Ah Runtime up to 20 h without backlight Charging time 12 h for full readiness Compact weight 0.3 kg for simple installation Long operating time for uninterrupted weighing processes The internal rechargeable module delivers a clear operational advantage for mobile or battery‑dependent weighing equipment: with 6 V and 1.2 Ah nominal capacity, the cell supports continuous use up to 20 h without backlight, reducing interruptions in measurement cycles and minimising downtime. For businesses that rely on accurate, reproducible weighing—such as small production lines, incoming goods inspection and mobile service units—this extended runtime translates into fewer recharges and more stable workflows. The lead‑acid (Pb) chemistry offers predictable discharge behaviour, which simplifies run‑time planning in daily operation. Simple integration and predictable recharging Charging behaviour and installation are designed for straightforward integration into existing instruments. The battery reaches full charge in 12 h, allowing overnight replenishment during non‑productive hours and predictable readiness for the next shift. At 0.3 kg, the unit is light enough for compact housings while remaining robust for workshop conditions; the modest mass also eases handling during maintenance or replacement. The compact format and internal mounting reduce the need for external adapters and help maintain the original instrument footprint, preserving ergonomics and transportability. Reliability, compatibility and operational benefits Manufactured by KERN, this power module is tailored for weighing accessories and support applications where dependable backup power is essential. The rechargeable battery functions as an internal power source, ensuring that calibration routines and data logging are not disrupted by mains interruptions or temporary field assignments. For operators with mixed fleets of scales, the standardised electrical values facilitate compatibility checks and spare‑parts management. The combination of consistent discharge, recognised chemistry and compact design supports a predictable maintenance rhythm and contributes to long‑term process reliability Specify the KFB-A01 when ordering through Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for procurement advice and technical matching Technical data Article number: KFB-A01 Manufacturer: KERN GTIN: 4045761113848 Country of origin: CN Weight: 0.3 kg Charging time: 12 h Runtime: up to 20 h without backlight Tariff number: 85072080 eClass: 21059207 Core specifications Voltage: 6 V Capacity: 1.2 Ah Weight: 0.3 kg Charging time: 12 h Runtime: up to 20 h without backlight Features & compatibility Type: Pb lead‑acid internal power supply Category: Accessories for scales SKU: KFB-A01 Manufacturer: KERN Origin: CN FAQ What is the expected runtime under normal use? The KFB-A01 offers a runtime of up to 20 h without backlight; actual duration depends on instrument power consumption and usage patterns. Which battery chemistry is used and what does it mean for maintenance? The module uses a lead‑acid (Pb) chemistry, which provides predictable discharge curves and simple maintenance handling compared with more complex chemistries. How long does the battery take to fully recharge? Charging to full capacity takes 12 h under standard charging conditions, making overnight cycles practical for regular operation. Is the unit suitable as a permanent replacement for mains power? The battery is intended as an internal rechargeable power source and backup for scales; long‑term continuous mains replacement is not the primary application. Can the module be integrated into different scale models? The KFB-A01 is designed as an accessory for weighing equipment; compatibility should be confirmed against instrument electrical specifications and mounting provisions. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271
60 g Moisture Analyser, 0.001 g Readability, Halogen Quartz Heater, 95 mm Pan, Single-Cell Weighing, USB, 400 W, 5–40°C - KERN
The combination of single‑cell weighing accuracy, 0.001 g readability and a halogen‑quartz 400 W drying system ensures fast, reproducible moisture results for sensitive samples; Order the KERN DBS 60-3 directly via Metav Werkzeuge or ask our consultants if needed. KERN DBS 60-3 Moisture Analyser — 60 g capacity, 0.001 g readability The KERN DBS 60-3 is a laboratory moisture analyser engineered for rapid, reliable moisture determination in low‑moisture specimens across plastics, pharmaceuticals and food‑related quality control. 60 g capacity, 0.001 g readability Single‑cell weighing system for high stability 400 W halogen‑quartz heater for controlled drying USB data output and 50 sample pans included Consistent accuracy for critical measurements The instrument’s 0.001 g readability and Single‑Cell weighing system deliver high repeatability and low noise, allowing small changes in mass to be detected with confidence. Linearity of ±0.003 g and reproducibility of 0.001 g mean the analyser produces comparable results across repeated runs, which is essential for process control and lab reporting. The compact 95 mm stainless steel pan and robust die‑cast aluminium housing contribute to a stable measurement environment, reducing drift and vibration effects. For applications that demand trace‑level sensitivity—such as polymer moisture profiling or pharmaceutical moisture limits—the analyser provides an objective basis for decisions and quality records. Fast, gentle drying tailored to delicate samples The device uses a halogen‑quartz 400 W heating element with active, programmable heating profiles to balance drying speed with sample integrity. Temperature control is optimised for temperature‑sensitive materials, limiting thermal damage while accelerating moisture removal. Ten programmable drying routines and memory for 100 stored processes simplify routine testing and ensure method repeatability across shifts. The graphic backlit display (15 mm digit height) shows current temperature, the active heating profile and the immediate moisture percentage, making each cycle traceable at a glance. The last measured value is held on screen until the next run overwrites it, supporting documentation without extra steps. Streamlined data handling and laboratory workflow Data transfer is handled via the USB interface, enabling export of weight and process records to a PC or printer for archiving and further analysis. A sample ID function stores up to 99 sample names, and integrated date/time stamping ensures that results are traceable. Password protection prevents unauthorised changes to settings and stored programmes, supporting regulatory compliance. Supplied accessories such as 50 sample pans and a draft shield reduce setup time and cross‑contamination risk. The analyser operates reliably within 5 °C–40 °C and up to 85% relative humidity, making it suitable for typical lab environments. Practical support and suitability for common industries The analyser is particularly suitable for low‑moisture applications in plastic technology, the pharmaceutical sector, food testing and R&D. An internal applications handbook is available in the download centre with examples, recommended settings and best practices to shorten the learning curve. For labs following USP guidance, note that the US Minimum Sample Weight concept should be applied when defining acceptable sample sizes. Built‑in power supply (220–240 V AC, 50 Hz) and a compact weight of 4.6 kg make the instrument simple to integrate on an existing bench. Contact Metav Werkzeuge today to discuss how the KERN DBS 60-3’s single‑cell accuracy and halogen drying technology can improve throughput and traceability in the laboratory; Metav Werkzeuge can advise on calibration options and suitable accessories Technical data Article number: DBS.60-3 Manufacturer: KERN GTIN: 4045761124226 Country of origin: PH Facts Weighing range: 60 g Readability: 0.001 g Linearity: ±0.003 g Reproducibility: 0.001 g Weighing pan diameter: 95 mm Display digit height: 15 mm Power supply: 220 V–240 V AC, 50 Hz Heater power: 400 W (halogen‑quartz) Operating temperature: 5 °C–40 °C Max ambient humidity: 85% Weight: 4.6 kg Special features Single‑cell weighing system Backlit graphic display 10 programmable drying programmes Memory for 100 drying processes Last value hold until overwritten Password protection for settings Sample ID for up to 99 samples Date and time display USB interface for data transfer 50 sample pans included Draft shield supplied Housing: die‑cast aluminium Weighing pan: stainless steel Built‑in power supply Applications handbook available in download centre FAQ What is the smallest change in mass the analyser can detect? The KERN DBS 60-3 detects changes down to 0.001 g; this level of sensitivity supports reliable moisture determination for low‑moisture samples. Which materials can be analysed with this moisture analyser? The device is suitable for materials such as plastics, pharmaceutical samples, many food matrices and other low‑moisture specimens; the instrument’s controlled heating is designed to protect temperature‑sensitive samples. How are drying methods and programmes managed? Up to 10 drying programmes can be stored and the unit retains records for 100 processes, allowing standardised methods to be applied and repeated without reconfiguration. Can measurement data be exported for documentation? Yes; the DBS 60-3 includes a USB interface for transferring weight and process data to a PC or printer for archiving and further evaluation. Is the instrument protected against unauthorised changes? Password protection is available to secure stored settings, programmes and measurement parameters on the analyser. Metav Werkzeuge — Emmerich am Rhein, Germany · Email: info@metav-werkzeuge.com · Tel: +49 2822 7131930 · WhatsApp: +49 170 2837271
600mm Stand for Platform Scale, Raised Indicator Mounting - KERN
Take advantage of an elevated indicator for clearer readings, the compact approx. 600 mm height and the lightweight 0.38 kg construction to improve workflow and handling; order the stand directly via Metav Werkzeuge or consult our advisors for tailored integration support. KERN SFB-A01 stand — 600 mm height for KERN platform scales The KERN SFB-A01 is a purpose-built stand that raises the weighing indicator to a practical working height for stainless-steel platform scales, improving legibility and placement in workshop and industrial environments. Height approx. 600 mm Compatible with KERN SFB platform scales Lightweight 0.38 kg for easy handling Raise the indicator for faster, more accurate readings Raising the display unit on a dedicated stand reduces awkward viewing angles and minimises handling during routine weighing tasks. The 600 mm elevation improves visibility and supports an ergonomic workflow, which can reduce reading errors and time spent adjusting the set-up. In production and quality-control contexts where repeatability and speed matter, positioning the indicator at eye or bench level simplifies operator routines and helps keep processes consistent. Compact, compatible and simple to integrate into weighing systems Designed specifically for use with KERN stainless-steel platform scales, this stand ensures direct compatibility without bespoke adapters. The compact footprint and 0.38 kg mass make it straightforward to mount, relocate or store, while preserving a stable attachment for the indicator. For teams that standardise on KERN components, the accessory integrates cleanly into existing weighing stations and supports a uniform equipment configuration across multiple benches or sites. Dependable supply and professional buying advantages Sourcing the stand from a specialist distributor keeps procurement efficient and predictable: Metav Werkzeuge combines extensive stock coverage with a quality filter at its Emmerich location, ensuring dependable supply for industry and trade. Choosing this accessory supports streamlined vendor management and aligns with established calibration and workflow practices, contributing to a reliable weighing environment without excessive complexity. For straightforward integration and assured supply of the KERN SFB-A01 stand, contact Metav Werkzeuge in Emmerich for tailored advice and secure delivery. Technical data Article number: SFB-A01 Manufacturer: KERN GTIN: 4045761144774 Country of origin: CN Tariff number: 73269098 Core data Stand height: approx. 600 mm Weight: 0.38 kg eClass: 21170601 Special features Suitable for stainless-steel platform scale KERN SFB Product group: Stands / accessories for scales Category: Accessories for scales FAQ Is the stand compatible with other KERN platform scales? The KERN SFB-A01 stand is specified for use with KERN SFB stainless-steel platform scales; compatibility with other models should be checked against the scale's mounting points. What is the exact height of the stand? The stand provides an elevation of approximately 600 mm, offering improved indicator visibility for typical bench and floor-mounted weighing set-ups. Does the stand require tools for assembly? Assembly for the KERN SFB-A01 is straightforward; standard workshop tools typically suffice for mounting the indicator to the stand. Is the stand suitable for mobile workflows? At 0.38 kg the stand is lightweight and can be repositioned easily, supporting flexible layout changes in production and testing areas. Can the stand be used in humid or stainless environments? The KERN SFB-A01 is intended for stainless-steel platform scale systems; users should confirm specific environmental resistance with the scale manufacturer if exposure to moisture or corrosive conditions is expected. KERN — Country of origin: CN — Manufacturer contact: not provided
7 m Paper Roll 45 mm Width, 30 mm Core Diameter, Pack of 5 - KERN
Combine KERN build quality with standard dimensions — 45 mm width and 7 m length per roll — for reliable, low-interruption receipt printing; supplied as a set of 5 for fewer changeovers. Order directly via Metav Werkzeuge or consult our specialists for compatibility and supply assurance. KERN Paper Rolls YKN-A01 – 45 mm width, 7 m length A set of paper rolls designed for receipt and scale printer use, offering standard dimensions for fast replacement in retail and workshop weighing equipment. 45 mm paper strip width 30 mm roll diameter 7 m paper length per roll Supplied as a set of 5 Reduce downtime with standard-format replacement rolls The 45 mm strip width and 7 m length per roll provide a predictable supply cycle that helps minimise interruptions during peak operation. These replacement rolls are supplied in a set of 5, which reduces the frequency of consumable changes and supports continuous printing on weighing stations and receipt printers. The clear numeric specifications — 45 mm, 30 mm diameter — allow straightforward procurement and simplify stock management for service departments and procurement teams. Dependable operation and consistent print output Manufactured under the KERN designation and originating from Germany, the rolls deliver uniform paper feed and predictable handling characteristics, which helps avoid jams and misfeeds in compact printers used with scales. The consistent core and roll geometry enable stable printing contrast and reduce maintenance cycles for small-scale printers. The emphasis on reliable performance and standard dimensions supports predictable uptime and smoother logistics for workshops and retail counters. Practical specification for workshop and retail environments Compact roll dimensions (30 mm roll diameter) make these consumables suitable where space is limited and quick roll replacement is essential. The specification list — 45 mm width, 7 m length — enables technical teams to match consumables precisely to device requirements, avoiding trial-and-error fits. Supplied as replacement rolls rather than loose paper, the pack reduces procurement complexity and helps maintain a reliable supply chain for weighing equipment accessories. Contact Metav Werkzeuge in Emmerich for stock confirmation and technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 to secure KERN YKN-A01 replacement rolls and ensure uninterrupted operation Technical data Article number: YKN-ACC SKU: YKN-A01 GTIN: 4045761157934 Manufacturer: KERN Country of origin: Germany Tariff number: 84239010 Product category: Scales > Accessories Weight: 0.1 kg Facts Paper strip width: 45 mm Roll diameter: 30 mm Length per roll: 7 m Pack quantity: 5 Weight per pack: 0.1 kg Special features For scales and receipt printers (accessory) Supplied as 5 replacement rolls Standard 45 mm width for scale printers Origin: Germany FAQ Are these rolls compatible with standard scale printers? The KERN paper rolls YKN-A01 feature a 45 mm strip width and standard geometry, making them suitable for many scale and receipt printers designed for narrow rolls. What is the length of each individual roll? Each roll in the KERN YKN-A01 pack measures 7 m in paper length, providing multiple receipts per roll before replacement is required. How many rolls are included in one pack? One pack contains 5 replacement rolls, sold together to reduce the need for frequent reordering. Is the manufacturer specified for these rolls? The rolls are supplied under the KERN designation (SKU YKN-A01) and are listed with Germany as the country of origin. KERN · Germany · GTIN: 4045761157934
750-1000mm Height-Adjustable Tripod Stand For Indicator Unit, Stainless Steel Tripod - KERN
Reliable stainless steel tripod with height-adjustable support and a solid three‑leg base guarantees steady elevation of weighing and evaluation units; combine robust construction and ergonomic adjustment for uninterrupted measurement workflows. Order directly via Metav Werkzeuge or consult our technical advisers for individual compatibility. YKP-01 Tripod Stand — Stainless steel, height-adjustable 750–1000 mm (KERN) A YKP-01 tripod stand designed to raise weighing indicators and evaluation units, optimised for workshop and laboratory scale applications. Height-adjustable 750–1000 mm Stainless steel construction Solid three‑leg tripod base Compact weight of 3 kg Engineered stability for consistent results The tripod provides a stable platform for measurement electronics, reducing vibration and movement that can impair readings. Constructed with a three‑leg base, the stand distributes weight evenly to maintain level positioning on uneven floors, which supports reliable output from connected indicators. This stability translates into fewer rechecks and a smoother production process, especially where repeatable accuracy is essential in weighing tasks. Durable materials built for workshops Made from stainless steel with a solid tripod foot, the stand resists corrosion and daily wear common in industrial environments. The corrosion‑resistant finish ensures longevity and reduces maintenance intervals, which means less downtime and lower total cost of ownership for workshop equipment. The material choice also supports hygienic environments where cleanability is required, while preserving structural integrity under routine use. Ergonomic adjustment for practical use The height-adjustable range of 750–1000 mm enables ergonomic placement of displays and evaluation units at operator height, improving visibility and reducing strain during frequent readings. Quick adjustment allows technicians to set the optimal working height for bench, trolley or floor setups without complex tools. This straightforward adaptability enhances workflow efficiency and contributes to a safer, more productive working environment. Seamless integration with weighing systems Designed for mounting evaluation devices and indicators, the tripod is compatible with a wide range of scale accessories and display units used in industrial metrology. The compact design and 3 kg mass support portability between workstations while preserving precision during measurement tasks. Installation is uncomplicated; the stand serves as a practical elevation solution where stable, elevated mounting of weighing electronics is required. Contact Metav Werkzeuge in Emmerich to confirm compatibility with specific indicators and to arrange delivery or technical consultation for the KERN YKP-01 tripod stand Technical data Article number: YKP-01 Manufacturer: KERN GTIN: 4045761184367 Country of origin: CN Tariff number: 73269098 ECLASS: 21170601 Facts Weight: 3 kg Height adjustment: 750–1000 mm Special features Material: stainless steel with solid three‑leg tripod base Application: for elevating weighing indicators and evaluation units Category: Scales accessories (Waagen > Zubehör) SKU: YKP-01 FAQ Is the tripod suitable for all types of weighing indicators? The tripod stand is designed for mounting weighing indicators and evaluation units; compatibility depends on the indicator's base plate or mounting interface and can be checked with the YKP-01 specifications. How is the height adjusted and locked in place? Height adjustment is mechanical within the 750–1000 mm range and is secured by the stand's locking mechanism to ensure stable positioning of the mounted device. Can the stand be used in corrosive or humid environments? The stainless steel construction provides corrosion-resistant properties, making the tripod suitable for many workshop and laboratory conditions where increased durability is required. Is the tripod portable between workstations? At a compact weight of 3 kg, the tripod is intended for easy repositioning while maintaining a robust base for accurate measurement tasks. What information identifies the product for ordering or stock checks? Use the SKU YKP-01, GTIN 4045761184367 and manufacturer KERN when checking availability or ordering. Metav Werkzeuge, Emmerich am Rhein, Germany | info@metav-werkzeuge.com | +49 2822 7131930
750–1000mm Tripod Stand For Indicator/Display, Height‑Adjustable Stainless Steel Base - KERN
Take advantage of a height‑adjustable elevation solution combining robust stainless‑steel construction and a massive three‑legged tripod for reliable stability and precise positioning. Order the KERN YKP‑02 directly via Metav Werkzeuge or ask our consultants for advice and delivery from Emmerich. KERN YKP-02 Tripod Stand — height‑adjustable 750–1000 mm, stainless steel The KERN YKP‑02 is a tripod stand designed to raise indicator and evaluator units for workshop and laboratory use, providing stable positioning and broad compatibility with multiple KERN scale series. Height-adjustable 750–1000 mm Robust stainless-steel tripod base Designed for indicator/evaluator units Compatible with multiple KERN series Stable elevation for precise readings A height-adjustable tripod removes guesswork from set‑up: the 750–1000 mm range permits accurate placement of the evaluation unit at the operator’s preferred working height, reducing posture changes and measurement variation. The massive three‑legged base delivers stability on uneven surfaces, which supports repeatable readings and protects sensitive load cells from unwanted lateral forces. This results in fewer rechecks and a smoother inspection workflow. Built for compatibility and workflow efficiency The stand is intended for mounting evaluation units and is compatible with a wide range of KERN series, simplifying procurement and reducing inventory complexity. Its universal mounting capability ensures the tripod integrates with existing weigh‑and‑measure equipment, enabling faster set‑up times and less downtime between jobs. The compatibility aspect therefore contributes directly to improved throughput and predictable production planning. Durable materials for long service life Constructed from stainless steel with a heavy‑duty tripod foot, the stand resists corrosion in workshop environments and sustains repeated handling without loss of function. Where painted steel components are supplied, the finish adds protection against abrasion. The material choice focuses on longevity and low maintenance, translating to reduced total cost of ownership over the product life cycle. Practical handling and application benefits With a net weight of 2.6 kg and a compact footprint, the tripod offers a practical balance between portability and robustness. The design supports simple vertical adjustment while keeping the mounted device secure; this simplifies calibration tasks and routine inspections. For users aiming for reliable positioning of displays and indicators, the stand enables stable visual alignment and safer working practices. Contact Metav Werkzeuge today for tailored advice on integrating the KERN YKP‑02 tripod into existing measurement setups and to arrange prompt delivery from our Emmerich warehouse. Technical data Article number: YKP-02 Manufacturer: KERN SKU: YKP-02 GTIN: 4045761184374 Origin: CN Facts Height range: 750–1000 mm Weight: 2.6 kg HS code (Tariff): 73269098 eCl@ss: 21170601 Special features Stainless steel with massive tripod base Height-adjustable Painted steel option / stainless finish For elevating indicator / evaluator units Compatible with BFB, BXS, BFS, BFA, BBB, BBN, BKN, IFS, IFB, KFE-TM, KXG-TM, KXS-TM, KEN-TM, NFB, NBB, SFE, UFA, UFB, UFC FAQ What is the adjustable height range of the tripod? The KERN YKP‑02 tripod offers a height range of 750–1000 mm, which allows precise positioning of evaluation units at ergonomic working heights. Which materials are used in the construction of the stand? The stand is supplied in stainless steel with a massive three‑legged base; painted steel versions are noted where applicable for increased surface protection. Is the tripod compatible with my KERN evaluation unit? Compatibility is wide: the KERN YKP‑02 is designed to fit numerous KERN series including BFB, BXS, BFS, BFA and others listed in the technical information, ensuring straightforward integration. How heavy is the tripod and what does that mean for handling? The KERN YKP‑02 weighs 2.6 kg, balancing ease of repositioning with sufficient mass for stable mounting in routine workshop and laboratory tasks. Can the stand improve measurement repeatability? Yes. By providing a stable, height‑adjustable support for the evaluation unit, the tripod reduces movement and misalignment, which helps improve repeatability of readings. Manufacturer: KERN; Origin: CN; Contact: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271
76mm Paper Roll 65mm Core, 40m Length, Pack of 5 - KERN
Benefit from consistent operation and reduced downtime thanks to the combination of long roll length and standard dimensions; these 76 mm-wide, 65 mm-diameter rolls are supplied in a pack of 5 for uninterrupted printing. Order directly via Metav Werkzeuge or consult the sales team for tailored delivery from Emmerich. Paper Rolls YKG-A01 — 76 mm width, 65 mm diameter (5-pack) by KERN The Paper Rolls YKG-A01 provide 76 mm-wide paper with a 65 mm diameter, suitable for use with scales and compatible receipt printers in industrial and retail environments 76 mm paper width 65 mm roll diameter 40 m length per roll Supplied as a 5-piece pack Reliable supply for continuous operation Long consumable life reduces production interruptions: each roll delivers 40 m of paper, which lowers the frequency of roll changes and supports steady shift operation. The pack of 5 minimises handling time and inventory turnover, providing a pragmatic advantage for busy workshops and retail counters. The combination of standard 76 mm width and 65 mm outer diameter helps to ensure a consistent feed and dependable printing performance across compatible devices. Practical benefits that simplify daily workflows Choosing these rolls improves operational efficiency through quick replacement and straightforward handling. The standard dimensions mean simple stock management and less time spent verifying compatibility; the compact packaging supports organised storage at the workbench. Where predictable output and low interruption are priorities, the quick replacement and low maintenance characteristics translate directly into measurable time savings and smoother processes. Compatibility explained for purchasing decisions The dimensions serve as the primary compatibility indicators: 76 mm is the nominal paper width and 65 mm is the roll diameter. These specifications are commonly supported by scale printers and point-of-sale devices intended for industrial weighing and receipt printing. As consumables from KERN, the rolls are presented as a practical option for procurement chains that need standardised, ready-to-install supplies rather than bespoke or speciality media. For reliable replacement consumables from KERN and steady operation at the workstation, contact Metav Werkzeuge in Emmerich for availability and rapid dispatch from our European stock. Technical Data SKU: YKG-A01 Manufacturer: KERN Category: Scales — Accessories Country of origin: JP Tariff number: 84239010 Facts Paper width: 76 mm Roll diameter: 65 mm Length per roll: 40 m Pack count: 5 Weight (per pack): 0.1 kg Special features Designed for scale and receipt printers Supplied as five rolls Standardised dimensions for compatibility FAQ Which devices are compatible with these rolls? Compatibility is determined by the 76 mm paper width and 65 mm roll diameter; the rolls suit scale printers and receipt printers that accept these standard dimensions and are commonly used with KERN weighing equipment. How long does one roll last in regular use? Each roll contains 40 m of paper; actual runtime depends on print density and usage pattern, while the pack of 5 offers extended supply and reduced changeovers. Are these rolls supplied by a recognised manufacturer? Yes, the rolls are branded KERN and offered as standard consumables for workshop and retail applications that use scales and receipt printers. What is included in the delivery? Delivery includes five individual paper rolls as specified; each roll is 76 mm wide with a 65 mm diameter and 40 m length. KERN — Japan — contact details not available
800mm Stand for Indicator Display, Height ~1040mm, Compatible With Kern Weighing Beams And Floor/Palette Scales - KERN
Take advantage of a lightweight, workshop-ready stand that raises the weighing indicator for clearer readings and flexible installation; compatible with a wide range of KERN scale models and ready to order via Metav Werkzeuge or discussed with our consultants for application advice. KERN BFS-A07 stand — Indicator-unit stand, KERN-compatible The BFS-A07 stand is a compact mounting solution designed to raise weighing indicator units for industrial and workshop scales, making displays easier to read and integrating cleanly with existing KERN equipment. Compact stand for raising indicator units Compatible with KERN UFA, BFB, BFN and BFS Also fits KERN pallet and through-rail scales Lightweight construction approx 2.6 kg Clear readings and dependable positioning for weighing tasks The stand offers stable positioning for indicator units, which improves readability and reduces handling errors during routine weighing operations. Built as a dedicated accessory for scales, this mounting solution ensures the indicator is elevated away from the weighing platform, helping to prevent signal interference and making the display accessible from a comfortable viewing angle. The combination of a compact footprint and robust support simplifies integration into production lines and workshop benches, delivering practical benefits without complex modifications. Practical workshop integration and ergonomic benefit With a focus on convenience, the support stand reduces clutter on the work surface and provides an ergonomic viewing height for operators handling frequent weighings. The lightweight construction allows for repositioning when workflows change, while the compact design maintains a minimal footprint in tight areas. Installation is straightforward when used with the compatible KERN equipment named below, enabling quick set-up in dispatch, goods-inwards or production cells where clear indicator visibility speeds up processes and reduces downtime. Clear compatibility to match existing KERN systems The stand is intended specifically as an accessory for KERN weighing systems, offering compatibility with a range of models so that workshops can standardise on a single mounting solution. By matching the stand to compatible weighing beams, floor scales and pallet models, users gain a consistent mounting approach across different scale types. This targeted compatibility minimises uncertainty when specifying accessories and supports a streamlined workflow in industrial weighing applications. For tailored advice or order placement, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the KERN BFS-A07 stand and its suitability for specific scale setups. Technical data Article number: BFS-A07 Manufacturer: KERN SKU: BFS-A07 GTIN: 4045761111547 Weight: 2.6 kg Origin: CN Facts Weight: 2.6 kg GTIN: 4045761111547 Commodity code: 73269098 ECLASS: 21170601 Compatibility & features Accessory for scales (stands category) For raising weighing indicator / evaluator units Compatible with weighing beams KERN UFA Suitable for floor scales KERN BFB, BFN and BFS Fits pallet scales KERN UFB and UFN and through-rail scale KERN NFB FAQ What scales is this stand compatible with? The stand is compatible with a range of KERN models; compatible types include weighing beams KERN UFA, floor scales KERN BFB/BFN/BFS, pallet scales KERN UFB/UFN and through-rail scale KERN NFB, ensuring broad applicability in industrial weighing setups. Is the stand easy to move around the workshop? Yes. The KERN BFS-A07 stand has a lightweight construction of approximately 2.6 kg, allowing for straightforward repositioning when workflows or station layouts change. What is the primary purpose of the stand? The stand is designed to raise the weighing indicator unit, providing an ergonomic viewing height and reducing interference with the weighing platform for clearer, more reliable readings. Can this stand be used for multiple indicator models? The stand is provided as a universal accessory for the compatible KERN scale families listed above, making it suitable for use with a variety of indicator layouts within those model ranges. Manufacturer: KERN, Origin: CN
80mm Thermal Paper Roll 61mm Core 50m Length 5-Pack - KERN
Combine reliable printing, a standard 80 mm paper width and a 50 m roll length for fewer interruptions and consistent documentation. Order the paper rolls directly via Metav Werkzeuge or ask our consultants if additional advice is required. KERN YKH-A01 Paper Rolls — 80 mm width, 50 m length (5-pack) The KERN YKH-A01 delivers dependable receipt printing for scales and weighing systems across industrial and retail applications. 80 mm paper width for standard receipt printers 61 mm roll diameter fits common holders 50 m length for longer print runs Pack of 5 rolls for extended supply Continuous printing reliability for weighing workflows The rolls are designed to support uninterrupted documentation in busy environments where consistent print output matters. With the 80 mm print width and a 61 mm core diameter, the supply integrates with the majority of receipt printers and scale-mounted printers used in workshops and retail counters. This compatibility reduces the need for frequent roll changes and minimises operational interruptions, ensuring smoother measurement and billing processes. The design suits extended use without complex handling. Fewer roll changes and simplified stock management Each roll provides 50 m of printable paper, which lengthens intervals between replacements and lowers handling time per shift. Supplied as a five-roll set, the assortment offers a straightforward inventory approach for stores and workshops, improving procurement efficiency. The longer roll length and standard dimensions translate into cost-effective operation by reducing downtime associated with roll swaps and by streamlining storage of consumables. Practical suitability and clear documentation The paper set is intended for use with weighing devices and accessories where clear legible prints are required for records and traceability. The product originates from Japan, reflecting consistent manufacturing standards. For customers unfamiliar with printer consumables, the key metrics—80 mm width, 61 mm diameter and 50 m length—define whether a roll will fit a given printer holder and how long it will last in daily use. This makes selection straightforward even for those new to procurement of scale accessories. For reliable receipt printing with KERN paper rolls and expert procurement support, contact Metav Werkzeuge for supply and tailored advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: YKH-A01 Manufacturer: KERN Country of origin: Japan Dimensions & core data Paper width: 80 mm Roll diameter: 61 mm Roll length: 50 m Weight: 0.1 kg Compatibility & contents Contents: 5 rolls Intended use: receipt printing for scales and weighing devices Category: Scales accessories FAQ Are these rolls compatible with standard scale printers? The rolls are designed to match common scale and receipt printers; check that the device accepts 80 mm paper width and a 61 mm core diameter for compatibility with KERN YKH-A01. How long does one roll typically last in continuous use? With a length of 50 m, a single roll lasts significantly longer than standard short rolls; exact runtime depends on print density and volume. Is the pack size suitable for workshop stock management? The set contains multiple rolls to simplify stocking and reduce the frequency of reorders for businesses using scales regularly. Can these rolls be used in retail point-of-sale systems? Yes, provided the POS printer accepts 80 mm width and the stated core diameter; the rolls are suitable for many retail and industrial printers. Where is the product manufactured? The paper rolls are produced in Japan and distributed under the KERN brand, listed as SKU YKH-A01. Manufacturer: KERN, Japan. Contact details not provided.
84×113 mm Density Determination Set For Liquids And Solids, DIN EN ISO 1183-1 - KERN
Take advantage of a compact, standards-compliant accessory set that combines precise measurement support, easy handling and full compatibility with KERN analytical balances; order via Metav Werkzeuge or consult our specialists for tailored advice. Universal density set YDB-03 — density determination set for liquids and solids, DIN EN ISO 1183-1 compliant (KERN) The Universal density set YDB-03 is a complete accessory kit for precise density determination of liquids and solids on analytical balances, designed for laboratory and workshop quality control. Complete kit for liquid and solid density testing Compliant with DIN EN ISO 1183-1 testing wire Includes stainless steel 20 g sinker Suitable for all current KERN analytical balances Reliable results through standard‑compliant design The kit is built to deliver consistent, traceable density readings by meeting established testing practice. Compliance with DIN EN ISO 1183-1 and the specified 0.5 mm wire diameter for the immersion basket reduces measurement uncertainty when determining densities of non‑foamed plastics and similar materials. The standard conformity ensures that results are comparable across laboratories and that the procedure aligns with common quality assurance frameworks, making the set suitable for routine checks and documentation in production environments. Everything required for efficient and comfortable testing Designed as an all‑in‑one solution, the set contains a beaker (Ø×H 84×113 mm), thermometer, sample holder, adapter, counterweights, a stainless steel sinker (20 g) and a universal immersion basket for both floating and sinking specimens. These components reduce setup time and minimise handling errors, which in turn shortens the measurement cycle and improves throughput. The basket’s fine wire and the included sinker enable reliable immersion procedures for a wide range of materials, while the clear layout of accessories supports a reproducible workflow even for teams with varying experience. Seamless integration into analytical balance workflows Compatibility with KERN analytical balances ensures straightforward mounting and stable measurement conditions, preserving balance calibration and minimising re‑work. For applications requiring documented traceability, an optional DAkkS calibration certificate for the sinker is available, listing relevant density and volume data. The kit’s compact footprint and balanced weight distribution make it convenient for bench use and simple storage, supporting lean laboratory routines and steady sample throughput without compromising on measurement quality. Contact Metav Werkzeuge in Emmerich for expert advice and to secure the KERN accessory set for immediate integration into laboratory workflows Technical data Article number: YDB-03 Manufacturer: KERN GTIN: 4045761152908 Country of origin: Germany Facts Dimensions (beaker Ø×H): 84 × 113 mm Weight (set): 0.65 kg Sinker mass: 20 g Tension wire diameter: 0.5 mm Tariff number: 90160090 ECLASS: 32120490 Special features Includes: thermometer, sample holder, adapter, counterweights, stainless steel sinker (20 g) Universal immersion basket for floating and sinking solids Compliant with DIN EN ISO 1183-1 Suitable for all current KERN analytical balances Optional: sinker density determination, DAkkS calibration certificate (DKD) FAQ What is the set used for? The universal density set YDB-03 by KERN is intended for precise density determination of liquids and solids using analytical balances, suitable for laboratory and workshop quality checks. Is the immersion basket standard‑compliant? Yes. The immersion basket wire has a 0.5 mm diameter and complies with DIN EN ISO 1183-1, meeting the procedure requirements for density determination of non‑foamed plastics. What items are included in the delivery? Delivery comprises a beaker (Ø×H 84×113 mm), thermometer, sample holder, adapter, counterweights, a stainless steel 20 g sinker and a universal immersion basket for floating and sinking specimens. Can the set be used with existing KERN balances? The kit is designed to be compatible with all current KERN analytical balances and supports straightforward mounting and measurement routines. Is calibration available for traceability? An optional DAkkS calibration certificate is available for the sinker, providing documented values for density and volume where traceability is required. Manufacturer: KERN — Germany. Dealer contact: info@metav-werkzeuge.com | +49 2822 7131930
9 kg Load Corner for CT.3000/5000 Three-Point Stainless Steel - KERN
The robust combination of stainless-steel construction and precise compatibility with KERN CT.3000/5000-3Q1 ensures reliable load-cell alignment and long-term operational stability. Benefit from durable materials and straightforward integration for consistent weighing results. Order the CE.RQ35903 load corner directly via Metav Werkzeuge or ask our consultants if needed. CE.RQ35903 Load corner for CT.3000/5000-3Q1 — stainless steel mounting accessory by KERN The CE.RQ35903 load corner is a stainless-steel mounting accessory designed for secure attachment and precise alignment of load cells in industrial weighing modules such as the CT.3000 and CT.5000 series. Solid stainless-steel construction Compatible with CT.3000/5000-3Q1 scales Precision alignment for load cells Corrosion-resistant finish Built for dependable industrial weighing accuracy Constructed from stainless steel, this mounting corner is intended to maintain mechanical integrity in workshop and industrial environments where consistent weighing is essential. The rigid design reduces flex and unwanted movement around the weighing module, which directly supports precision in measured values and lowers the need for frequent recalibration. Where load-cell alignment matters, a stable mounting accessory contributes to repeatable results and predictable maintenance intervals, enhancing process reliability across production and quality-control workflows. Faster integration and reduced downtime for workshops The accessory is engineered for uncomplicated mounting with the CT.3000 and CT.5000 series, streamlining replacement or retrofit procedures. Reduced installation complexity shortens machine downtime and simplifies routine checks, enabling workshop staff to focus on production rather than lengthy setup tasks. The durable material choice and corrosion resistance extend service life in demanding conditions, which translates into longer intervals between part renewals and more efficient asset utilisation on the shop floor. Proven supply chain and precision partnership through Metav Sourcing precision accessories from a specialist distributor ensures traceable quality and consistent availability. Metav combines extensive product range and a European logistics base in Emmerich with expert selection criteria, providing a reliable supply of calibrated components and compatible parts. Using components manufactured by established names such as KERN supports compliance with industrial measuring routines and reinforces confidence in both installation and subsequent measurements. Choose Metav Werkzeuge for dependable supply and compatibility checks—contact our consultants in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to verify suitability and delivery options Technical Data Article number: CE-RQ SKU: CE.RQ35903 Manufacturer: KERN Material: stainless steel Suitable for: CT.3000/5000-3Q1 Category: Scales / Accessories Facts Weight: 9 kg ECLASS: 21131725 Special features Corrosion-resistant stainless-steel construction Designed for load-cell alignment and mounting Intended for industrial weighing applications Robust design for long service life FAQ Is this load corner compatible with CT.3000 and CT.5000 weighing modules? Yes. The CE.RQ35903 load corner is designed specifically for use with CT.3000/5000-3Q1 weighing modules and supports correct load-cell alignment. What material is the mounting accessory made from? The accessory is manufactured from stainless steel, providing corrosion resistance and mechanical stability for industrial environments. How heavy is the component and does that affect installation? The unit weighs 9 kg; its mass contributes to a stable mounting arrangement and should be considered during handling and installation. Will this accessory improve weighing repeatability? When correctly installed with the compatible weighing module, the CE.RQ35903 helps maintain load-cell alignment and structural rigidity, supporting consistent measurement repeatability. Can the component be used in corrosive workshop conditions? The stainless-steel construction offers enhanced resistance to corrosion, making it suitable for many workshop environments where moisture or mild chemical exposure is present. KERN
9 V 300 mA Universal External Power Adapter With EU/UK/US/CH Plugs, 100–240 V 50/60 Hz - KERN
Reliable 9 V / 300 mA output combined with a 100–240 V universal input and interchangeable international plug adapters supports uninterrupted use across workshops and while travelling; the compact, lightweight design keeps bench space clear and simplifies storage. Order the KERN YKA-03N directly via Metav Werkzeuge or ask our consultants for tailored advice. KERN YKA-03N — Universal external power adapter with 9 V / 300 mA output and multi‑plug set The KERN YKA-03N is a compact universal external power adapter designed for scales and precision instruments, providing a steady 9 V / 300 mA supply and interchangeable plugs for EU, UK, US and CH mains sockets. Universal input 100–240 V, 50/60 Hz Stable 9 V DC output at 300 mA Interchangeable EU/UK/US/CH plug adapters Compact and lightweight, approx. 0.08 kg Reliable compatibility for mixed‑fleet workshops The adapter offers true international compatibility, accepting 100–240 V at 50/60 Hz, which eliminates the need for separate supplies when using instruments across different regions. This wide input range reduces logistic complexity for service technicians and procurement teams, ensuring the same power solution can be used for a variety of precision devices. The result is fewer inventory items and a more consistent power profile for bench‑level equipment. Practical plug set and travel convenience Delivered with interchangeable EU/UK/US/CH plug adapters, the unit supports rapid redeployment in different markets without additional accessories. The compact casing and lightweight construction (approx. 0.08 kg) make it suited to mobile test benches and field service kits. For applications that require frequent relocation of instruments, the adapter provides a tidy, portable option that minimises downtime and transport costs. Stable supply for sensitive measuring devices Designed as an external power source for scales and similar measuring equipment, the adapter supplies 9 V at 300 mA, matching common input requirements for precision instruments. The consistent voltage and current specification helps to maintain measurement stability and reduces the risk of fluctuations that can affect calibration results. This makes the unit appropriate for laboratory benches, inspection rooms and industrial scales where repeatable readings are essential. Clear integration into workshop supply chains As a universal external adapter, the device integrates easily with existing instrument fleets and cabling standards. The compact footprint frees up bench space, while the included plug set avoids compatibility delays when deploying equipment to different countries. For purchasing departments, the standardised specification simplifies procurement and stock management, supporting smoother operations and fewer interruptions. Choose the KERN YKA-03N for dependable international compatibility and contact Metav Werkzeuge in Emmerich for personalised advice and fast dispatch—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: YKA-03N Manufacturer: KERN GTIN: 4045761210431 Country of origin: CN Commodity code: 85044090 Core technical data Input voltage: 100–240 V, 50 / 60 Hz Output: 9 V DC, 300 mA Weight: approx. 0.08 kg Special features External universal power adapter for scales and precision instruments Interchangeable plug adapters included: CH, EURO, UK, US Compact form factor for bench and mobile use FAQ Is this adapter suitable for KERN scales and other precision instruments? The KERN YKA-03N is intended as an external power supply for KERN scales and comparable precision instruments that require a 9 V / 300 mA input. Which plug types are included with the adapter? The delivery scope for the adapter includes interchangeable plug adapters for EU, UK, US and CH mains sockets to support international use. Can the adapter be used worldwide without a separate voltage converter? Yes. The universal input of 100–240 V, 50/60 Hz enables operation across standard mains voltages without an additional converter. How portable is the unit for field service work? With a compact design and a weight of approximately 0.08 kg, the adapter is well suited to mobile toolkits and service engineers who require a lightweight power option. What is the exact model designation to order or reference? Refer to the SKU YKA-03N and manufacturer KERN when ordering or checking compatibility. KERN — Origin: China; SKU: YKA-03N; GTIN: 4045761210431
945x505x5mm Anti-Slip Rubber Mat, Non-Slip Surface - KERN
Benefit from a non-slip rubber surface, a compact footprint of 945 × 505 mm and a robust 5 mm thickness to improve stability at weighing stations and protect surfaces; order directly via Metav Werkzeuge or consult our specialists for tailored advice. Non-slip rubber mat EOE-A01 – 945 × 505 × 5 mm, KERN A Non-slip rubber mat EOE-A01 designed to stabilise scales and protect worktops in industrial metrology and workshop environments Stabilises weighing platforms and instruments Durable 5 mm thickness for long-lasting use Lightweight at 1 kg for easy repositioning Resistant surface reduces slippage and wear Greater measuring reliability through stable support The non-slip surface and firm 5 mm construction reduce unwanted movement and vibration under platform scales, which helps to secure repeatable readings and minimise rework. By providing a level, grippy interface between load and scale, the mat contributes to reliable measurement processes in production and inspection areas. The compact dimensions of 945 × 505 mm make it suitable for most small to medium platform scales used in workshops and small production lines, delivering measurable improvements in operational consistency. Practical workshop benefits and longevity Designed as a straightforward workshop accessory, the mat combines durability with easy handling: at approximately 1 kg it can be repositioned quickly for changeovers or cleaning without specialised tools. The rubber surface resists abrasion from routine movement and helps protect both the weighing equipment and the underlying bench or floor from scratches and impact. These attributes reduce downtime for maintenance and protect capital equipment, supporting a smoother workflow on the shop floor. Seamless integration into weighing setups and safety routines As an accessory for weighing equipment, the mat is a pragmatic addition to quality-control stations and packing areas where slip prevention and surface protection are essential. The product’s compatibility with scales and balance platforms supports safer handling of loads and reduces the risk of sliding during weighing operations. Its simple design ensures immediate benefits—better safety, fewer interruptions and a more professional presentation for inspection routines and customer-facing processes. Contact Metav Werkzeuge in Emmerich for ordering and technical guidance on this KERN non-slip rubber mat EOE-A01 — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, local support Technical data Article number: EOE-A01 SKU: EOE-A01 Manufacturer: KERN Country of origin: CN GTIN: 4045761102446 Facts Dimensions (B×T×H): 945 × 505 × 5 mm Weight: 1 kg ECLASS: 21101490 HS code: 40169997 Special features Non-slip rubber surface Designed for weighing stations and scales Accessory category: Waagen > Zubehör Image available (product visual on file) FAQ What size is the mat and will it fit standard platform scales? The mat measures 945 × 505 × 5 mm and is intended to fit small to medium platform scales as an accessory to stabilise weighing operations; confirm platform dimensions against these measurements before purchase. Is the mat suitable for industrial workshop use? Yes, the KERN non-slip rubber mat EOE-A01 is designed for workshop and industrial environments to protect surfaces and reduce slippage under scales. How heavy is the mat and can it be moved easily? At approximately 1 kg the mat is lightweight and can be repositioned or removed for cleaning without specialised handling equipment. Does the mat affect weighing accuracy? The mat improves stability and can help achieve more repeatable measurements by reducing slippage and dampening minor surface irregularities beneath the weighing device. Is this mat compatible with chemical exposure or high temperatures? Specific chemical and temperature resistances are not detailed for this item; testing is advised when chemical exposure or elevated temperatures are expected in application. KERN; Country of origin: CN; GTIN: 4045761102446
Accurate weighing that keeps production consistent
Scales are measuring instruments that determine the weight, force or count of an object and are essential across workshops and production lines. From precision scales that resolve fractions of a milligram to crane scales that handle several tonnes, the right weighing equipment ensures process reliability, legal compliance and operational efficiency.
How the right scale supports your workflow
Scales convert mechanical or electronic signals into repeatable weight values; external factors such as local gravity, magnetism, air buoyancy and vibration influence the result and often require site-specific adjustment. For legally binding measurements a statutory verification is required, while routine quality assurance is achieved through documented calibration. Choosing the correct combination of measuring range and readability avoids unnecessary sensitivity and stabilises throughput.
Practical advantages you notice every day
- Fast, reproducible results that reduce rework and speed up throughput.
- Better process control through repeatability and consistent stabilisation times.
- Compliance where required: support for statutory verification and DAkkS-accredited calibration services.
- Lower downtime via robust designs for industrial environments and user-friendly tare functions.
- Versatility across applications with options such as precision scales, analytical balances, platform scales, counting scales and checkweighers.
Premium measurement from a trusted partnership
KERN & SOHN represents a long-established premium choice for precise weighing and metrology, offering an extensive range of instruments and accredited services. Metav acts as your procurement and quality filter from Emmerich: decades of expertise, over 48,000 customers and a catalogue of more than 250,000 products ensure reliable supply and consolidated sourcing for industry, trade and crafts.
Key technical data at a glance
- measuring range: from sub-milligram to multiple tonnes
- readability (d): smallest display step, determines sensitivity
- linearity: specification for deviation across the measuring range
- tare: container weight subtraction, essential for net weight determination
- environmental influences: gravity, magnetism, air buoyancy, vibration, temperature, draught
- common types: precision scales, analytical balances, platform scales, counting scales, checkweighers
- verification vs calibration: statutory verification required for legally relevant weighing; calibration for traceable quality assurance
- application areas: laboratory, production, warehouse, shipping, retail, gastronomy
FAQ
What does readability (d) mean for scales?
Readability is the smallest weight increment a scale displays. For precision scales, a smaller readability gives finer resolution but increases sensitivity to draughts and vibration.
What is the difference between accuracy and repeatability?
Accuracy describes how close a measured value is to the true value; repeatability describes how consistently a scale returns the same result under identical conditions. Both matter, but repeatability is often decisive for stable production processes.
When do I need a verified (statutory) scale?
A verified scale is required whenever weight determines legal transactions, for example sales by weight. For internal quality control, a documented calibration is typically sufficient.
Why does my scale show fluctuating values despite correct operation?
Fluctuations are often caused by environmental factors: air draught, nearby vibration, temperature changes or an unstable support. Site selection and appropriate housing or wind protection reduce this effect.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com