Reliable scales for precise industrial weighing
Scales are essential for accurate weight determination in production, laboratory and shipping environments, providing clear benefits in process control, quality assurance and legal compliance. A well-chosen scale delivers the required weighing range and readability while ensuring repeatable results for tasks such as quality control, recipe formulation or parcel handling, and integrates features like tare, counting and data export to streamline workflows. Consideration of environmental influences, routine calibration or legal verification and sturdy construction for heavy-duty use ensures consistent performance with precision scales, platform scales and counting scales.
5-Pack Protective Cover for WTB Keyboards and Housings, Accessory - KERN
A practical choice for workshop hygiene and device protection: the cover fits over the keyboard and housing of WTB scales, offers quick replacement cycles and comes as a pack of 5 for immediate availability. Lightweight at 0.03 kg, the accessory reduces contamination risk and supports continuous operation. Order the protective cover directly via Metav Werkzeuge or ask our consultants if needed. Protective cover for WTB (RFB-A01S05) — KERN, pack of 5, keyboard and housing protection A protective cover for WTB scales that shields the keyboard and housing from dust and contamination while preserving instrument readability Designed for WTB keyboard and housing protection Pack of 5 protective covers Lightweight at 0.03 kg per unit Accessory for scale maintenance and hygiene Keep controls clean and production uninterrupted The slim protective hood offers straightforward protection for the keyboard and housing of laboratory and industrial scales, reducing the frequency of cleaning interventions. By covering sensitive surfaces, the accessory prevents particulate ingress and potential surface soiling that can hinder operation. Lightweight handling at 0.03 kg supports quick replacement during shift changes and minimises interruption to measurement tasks, helping to sustain reliable throughput and predictable workflows. Practical hygiene solution for regulated environments Supplied as a pack of 5, the accessory supports routine swap-out schedules so that cleanliness standards are maintained without delay. This approach delivers a cost-effective method to reduce cross-contamination in workshops, test stations and production benches. The simple design ensures compatibility with standard instrument housings, providing a ready-to-use measure that complements cleaning protocols and strengthens workplace safety practices. Seamless integration with scale equipment and service routines As an accessory for the WTB family, the hood is intended to integrate with existing workflows without additional tooling or installation steps. Its function-focused form helps protect display areas and input surfaces while remaining unobtrusive during operation. For procurement and stock planning, the pack format ensures immediate availability for service kits and spare-part inventories, supporting dependable device uptime across multiple workstations. Secure KERN protective covers for WTB scales from Metav Werkzeuge in Emmerich — for reliable keyboard and housing protection contact our consultants at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: RFB-A01S05 Manufacturer: KERN GTIN: 4045761184565 Country of origin: CN Facts Weight: 0.03 kg ECLASS: 24322502 HS code: 39269097 Special features For WTB keyboard and housing protection Pack contents: 5 protective covers Product group: Work protection hoods (scales accessory) FAQ Is this cover compatible with all WTB scale models? The protective cover for WTB (RFB-A01S05) is designed for use with WTB series housings and keyboards; compatibility should be confirmed against the specific instrument dimensions. How many covers are supplied per SKU RFB-A01S05? The KERN RFB-A01S05 is delivered as a pack of 5 protective covers to support routine replacement. Can the covers be cleaned and reused? These covers are intended as quick-replacement protection; reuse depends on the contamination level and internal hygiene procedures for the instruments. What does the lightweight specification mean for handling and storage? At 0.03 kg per unit, the covers are easy to handle and store, enabling fast swaps during operational shifts and minimal storage footprint. KERN — Origin: CN
5-Pack Protective Dust Cover for EWJ Precision Scale, Compatible With KERN - KERN
Take advantage of a tailored protection solution that combines simple handling, compatibility with KERN precision scales and a practical 5-piece set for immediate replacement. Improve instrument uptime and limit contamination-related errors — order the protective cover directly via Metav Werkzeuge or ask our consultants if needed. Protective cover EWJ-A04S05 — Protective cover for precision scale, compatible with KERN The Protective cover EWJ-A04S05 is designed to shield sensitive weighing instruments from dust and contamination, suitable for laboratory benches and workshop quality-control stations. Protective cover for KERN EWJ precision scale Supplied as 5-piece set Lightweight at approx. 0.02 kg each Reliable protection that preserves measurement quality A durable protective cover reduces the risk of dirt, spills and particulate ingress that can affect load cells and delicate weighing electronics. By preventing contamination, the cover helps to maintain repeatable readings and reduces the frequency of calibration or service interventions. The specified compatibility with KERN EWJ-series devices ensures a precise fit, which is essential for preserving the factory-set tolerances of a precision scale and avoiding measurement drift. A practical set to keep processes running Supplying the cover as a 5-piece set supports uninterrupted workflows: one cover can remain in use while spares are immediately available for replacement after cleaning or accidental damage. For industrial and workshop environments where sampling and frequent handling occur, having ready spares reduces downtime and simplifies inventory management. This approach targets efficiency and cost-effectiveness by lowering the likelihood of production halts due to unprotected instruments. Lightweight handling that improves daily workflow At approximately 0.02 kg per cover, the hood is easy to fit and remove, making routine maintenance and cleaning straightforward even in busy metrology stations. The compact design supports space-efficient storage on a service trolley or in a calibration kit. Easy handling translates into faster changeover times during shift changes and a lower labour burden for routine housekeeping around precision equipment. Contact Metav Werkzeuge today to secure the KERN protective cover EWJ-A04S05 set — our Emmerich-based team will advise on compatibility and delivery to keep measurement operations reliable Technical data Article number: EWJ-A04S05 SKU: EWJ-A04S05 GTIN: 4045761185401 Manufacturer: KERN Country of origin: CN Data Weight: 0.02 kg Tariff code: 39269097 eClass: 24322502 Special features Compatibility: fits KERN EWJ precision scale Scope of delivery: 5 pieces Category: scale accessories Fast dispatch — available through Metav Werkzeuge FAQ Is this cover compatible with KERN EWJ scales? Yes. The protective cover EWJ-A04S05 is specified for use with KERN EWJ precision scales and provides a fitted shield for typical EWJ models. What does the set include? The delivery comprises a 5-piece set of protective covers (EWJ-A04S05), enabling immediate replacements and spares for workshop use. How does the cover protect the scale? The cover shields the weighing area from dust and light contamination, helping to preserve load-cell performance and reduce cleaning-related downtime for KERN precision scales. Is the cover suitable for laboratory and workshop environments? Yes. The lightweight design and exact fit make the cover appropriate for benches in laboratories and production quality-control stations where frequent handling occurs. Manufacturer: KERN — Made in China; For enquiries contact Metav Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp: +49 170 2837271
5-Pack Protective Dust Cover for PCD.250-3, For Weighing Indicator - KERN
Benefit from reliable dust protection and straightforward compatibility with the PCD.250-3 indicator; the lightweight design preserves handling and the practical set format simplifies stock keeping. Order the Protective cover for PCD.250-3 directly via Metav Werkzeuge or ask our consultants if needed. Protective cover for PCD.250-3 — KERN accessory for weighing indicators The Protective cover for PCD.250-3 provides dust and contaminant protection for weighing electronics, suited to workshop and industrial scales where reliable indicator performance is required. Protective cover for PCD.250-3 indicators KERN accessory for weighing equipment Delivered as a practical set Protect sensitive electronics and maintain consistent measurements The cover offers targeted dust protection for the indicator unit, helping to prevent particulate ingress that can affect display clarity and internal controls. In practice, fewer contamination-related interruptions mean less cleaning and reduced recalibration frequency, which supports a steady production rhythm. By limiting environmental exposure to the display and buttons, this accessory contributes to sustained measurement accuracy and lower long‑term maintenance effort for weighing systems. Simple compatibility and low handling effort for workshop use Designed specifically for the PCD.250-3 indicator, the hood ensures precise compatibility with the mounting and shape of the device; the fit reduces the risk of accidental displacement while accessing controls. The cover’s lightweight design keeps added mass minimal and makes handling straightforward during routine checks or when the indicator needs to be moved. The practical form factor means no special tools are required for fitting, so integration into daily workflows is immediate and transparent. Practical supply and dependable sourcing for uninterrupted operation Supplied as a convenient set, the cover streamlines replenishment for workshops and service departments that maintain several weighing stations. Sourcing via Metav Werkzeuge offers a reliable logistics channel and access to a broad range of complementary accessories, combining rapid dispatch from Emmerich with a wide product range. This procurement route supports predictable stock management and reduces the number of supplier interfaces, aiding continuous operation across production and inspection environments. For advice on suitability and to arrange supply of KERN accessories, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for personalised assistance and ordering options Technical data SKU: PCD-A05S05 Manufacturer: KERN GTIN: 4045761185319 Origin: CN HS code: 39269097 Facts Article number: PCD Net weight: 0.02 kg Special features Compatible with PCD.250-3 indicators Delivered as set of 5 Product category: Scales accessories Rapid dispatch noted in product brief FAQ What is the Protective cover designed to protect? The protective hood shields the indicator’s display and controls from dust and light contamination, maintaining clear operation of the PCD.250-3 indicator. Is this KERN accessory compatible with other indicator models? Compatibility is specified for the PCD.250-3; similar housings are model-specific, so check dimensions before fitting other devices. How does the cover affect maintenance routines? By reducing dust ingress and surface soiling, the cover helps decrease cleaning frequency and supports stable measurement behaviour for the indicator. Does the set include multiple covers for workshop stocking? The product is supplied as a practical set, intended to simplify replacement planning and keep several stations protected. Metav Werkzeuge · Emmerich am Rhein · Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930
5-Pack Protective Dust Hood for MPLS.420-3F Scales, Lightweight Splash Cover - KERN
Take advantage of the combination of lightweight protection, straightforward compatibility and easy replacement to keep weighing stations clean and operational; order the accessory directly via Metav Werkzeuge or ask the consultants for detailed advice. Protective Hood PLJ-A01S05 – scale accessory for MPLS.420-3F, by KERN A Protective Hood PLJ-A01S05 designed as an accessory for MPLS.420-3F scales, offering simple protection against dust and incidental splashes during routine weighing and handling. Protective hood for MPLS.420-3F scales Supplied as a five-piece set Extremely lightweight at 0.03 kg Extend the service life of weighing equipment with minimal effort The protective hood acts as a practical barrier that reduces contamination of the weighing area and associated components, helping to preserve calibration intervals and reduce cleaning effort. As an accessory specifically matched to the MPLS.420-3F series, the cover provides straightforward compatibility with the relevant enclosure geometry, enabling faster installation and removal. The lightweight construction contributes negligible bulk while offering a visible improvement in day‑to‑day cleanliness, which supports consistent measurement quality and lowers indirect maintenance costs. Keep workflows efficient with ready replacements Supplied as a set, the covers allow for quick rotation and replacement during scheduled cleaning or when wear is observed, minimising downtime in production and laboratory routines. The option to replace a single item from the set ensures continuity of operation while spare pieces are sanitised or stored. This practical supply approach supports continuous throughput in busy environments, where simple consumables must not interrupt process flow or shift productivity. Simple storage and handling for busy environments The compact form and low weight make the covers easy to store near the weighing station without occupying valuable bench space. Their manageable size reduces handling time during changeovers and keeps ancillary tasks brief, so focus remains on measurement tasks rather than on managing protective equipment. Clear labelling and a consistent accessory format mean stores and toolrooms can keep inventory under control and minimise procurement overhead. OEM alignment and traceable identification As an accessory from KERN, the hood is designed to match the intended application and mechanical interfaces of the MPLS.420-3F series, ensuring a predictable fit and function. Traceable identification via the SKU supports stock control and reorder accuracy, while origin information contributes to supply‑chain transparency. This alignment reduces the risk of ill-fitting substitutes and supports a reliable maintenance plan that safeguards measurement accuracy over time. For original KERN accessories such as the PLJ-A01S05 protective hood and for ordering or technical advice, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 (WhatsApp +49 170 2837271) Technical data Article number: PLJ SKU: PLJ-A01S05 GTIN: 4045761186972 Manufacturer: KERN Country of origin: IT Facts Weight: 0.03 kg eClass: 24322502 Tariff number: 39269097 Special features Compatibility: for MPLS.420-3F series Scope of delivery: five covers per set Category: Scales > Accessories FAQ What is the primary purpose of this hood? The protective hood is intended to reduce dust and incidental splashes on the weighing area, helping to maintain cleanliness and support consistent measurements for the MPLS.420-3F series. Is this an original KERN accessory? Yes, the item is a KERN accessory supplied under SKU PLJ-A01S05 and is specified for use with the MPLS.420-3F scales. Can the covers be replaced individually? Covers supplied in the set can be rotated and replaced individually to allow ongoing operation while others are being cleaned or put into storage. How does this accessory benefit routine maintenance? By reducing contamination, the hood contributes to longer intervals between detailed cleanings, which can lower indirect maintenance effort and help preserve calibration stability. Manufacturer: KERN; Address: –; Contact: –
5-Pack Protective Hood for GAB CPB CFS CCS Scales, Splash Cover - KERN
Take advantage of straightforward scale protection with a lightweight, compatible cover that reduces downtime and simplifies replacements; supplied as a five-piece set for immediate stock rotation. Order the protective hoods directly via Metav Werkzeuge or consult our advisors for application guidance. Protective Hood CFS-A02S05 — protective cover for KERN scales, compatible with GAB, CPB, CFS and CCS The Protective Hood CFS-A02S05 serves as a dedicated protective cover for scale modules from the GAB, CPB, CFS and CCS series, intended for workshop and laboratory weighing environments. Compatible with GAB, CPB, CFS and CCS scales Supplied as a five-piece set Lightweight: 0.04 kg each Rapid replacement reduces measurement downtime Preserve weighing accuracy with reliable protection The primary role of this cover is to provide consistent protection for weighing equipment, helping to maintain measurement integrity in routine operations. By shielding sensitive components from dust, light contamination and incidental contact, the hood contributes to stable readings and reduces the frequency of cleaning or sensor recalibration. The design emphasises unobtrusive coverage so that workflows remain uninterrupted while the instrument stays protected. Minimise downtime through easy replacement and storage Supplied as a compact set, the covers enable quick swaps during shift changes or maintenance intervals. The lightweight construction (0.04 kg per unit) means little storage impact and effortless handling when replacing worn or soiled covers. For busy facilities that require continuous operation, keeping a ready set on hand reduces stoppages and supports predictable production cycles, delivering a practical benefit for workshop managers and quality teams. Ensure fit and stocking efficiency for multiple scale series Compatibility across the GAB, CPB, CFS and CCS series simplifies procurement and inventory control: a single SKU covers several instrument types. This cross-series fit supports centralised stocking strategies and lowers the number of product variants to manage. The hood set is therefore a convenient accessory for service departments and procurement teams aiming to streamline spare-part lists while ensuring ready availability of protective equipment. Choose KERN protective hoods from Metav Werkzeuge for dependable scale protection and simplified spare-part management — contact Metav Werkzeuge in Emmerich for tailored advice or to place your order via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CFS SKU: CFS-A02S05 Manufacturer: KERN GTIN: 4045761184510 Weight: 0.04 kg Country of origin: CN ECLASS: 24322502 Tariff number: 39269097 Facts Product group: Work protection hoods for scales Scope of delivery: 5 pieces Category path: Waagen › Zubehör Special features Compatible with GAB, CPB, CFS and CCS series Lightweight design for quick handling Intended for workshop and laboratory use FAQ What scale models are compatible with this protective hood? The protective hood CFS-A02S05 is designed to fit scales from the GAB, CPB, CFS and CCS series and provides standard protective coverage for these models. How is the product supplied and what is included? Delivery includes a five-piece set of protective hoods; the CFS-A02S05 set allows immediate replacement cycles and spare-part stocking. Does the hood affect measurement accuracy when installed? When correctly positioned, the hood preserves the scale’s intended measurement function; the CFS-A02S05 is designed to protect without interfering with weighing operations. KERN · Country of origin: CN · No direct manufacturer contact provided
5-Pack Protective Hood for MPES.620-3M, Fits 140x120mm & 200x200mm Weighing Plats - KERN
Take advantage of reliable dust and splash protection, proven compatibility with KERN PES/PEJ scales and a compact, lightweight design for efficient workshop routines; order the protective covers directly via Metav Werkzeuge or consult the Metav team for procurement support. KERN PES-A04S05 Protective Cover for PES/PEJ Scales — Compatible with 140 x 120 mm & 200 x 200 mm Pans The PES-A04S05 protective cover is a fitted accessory for precision weighing equipment, designed to shield scale platforms from dust and light contamination while remaining unobtrusive in daily operation Pack of five protective covers Compatible with KERN PES/PEJ scales Fits 140 x 120 mm and 200 x 200 mm pans Lightweight, space-saving storage Not suitable for PES 31000-1M Preserve measurement reliability with targeted protection A compact protective cover such as this one prevents particulate ingress and surface contamination that can lead to drifting results and repeated cleaning cycles. The small weight (0.02 kg) and tailored shape allow the cover to sit securely over standard pans without affecting tare adjustments, helping to keep precision measurement workflows steady and reproducible. For workshops that run frequent checks, the covered platform reduces maintenance interruptions and supports consistent process control. Minimise downtime through model-specific compatibility Delivered as an accessory for KERN instruments, the cover is engineered for direct compatibility with PES/PEJ families and specific models such as MPES.620-3M, matching common weighing pan formats (140 x 120 mm and 200 x 200 mm). Correct matching simplifies fitment and replacement, so protective measures are implemented quickly and without modification. Note that the design is not suitable for PES 31000-1M, ensuring clarity when selecting the correct accessory for a given scale. Practical handling that suits workshop routines Supplied as a five-piece set, the covers enable scheduled replacement and spare-part stocking without excessive storage demand. The slim profile supports tidy stacking and fast exchange during shift changes, contributing to smoother operations and reduced cleaning labour. Manufactured origin in Japan under the KERN brand signals consistent production standards, while the minimal footprint of each hood preserves bench space in crowded work environments. Contact Metav Werkzeuge for procurement of KERN PES-A04S05 covers and tailored advice from Emmerich-based specialists Technical data Article number: PES-A04S05 Manufacturer: KERN GTIN: 4045761186903 Country of origin: JP Tariff number: 39269097 Weight: 0.02 kg Core data Suitable pan sizes: 140 x 120 mm; 200 x 200 mm Suitable for: MPES.620-3M Not suitable for: PES 31000-1M Special features Pack of five covers Accessory for PES/PEJ scales Lightweight protective hood FAQ Is this cover compatible with my KERN scale model? Compatibility is indicated by pan size and model family; the PES-A04S05 fits KERN PES/PEJ models with 140 x 120 mm or 200 x 200 mm pans and specific units such as MPES.620-3M. Does the cover protect against dust and minor spills? The protective hood shields the weighing pan from dust and light contamination, reducing the need for frequent cleaning and helping to maintain reliable weighing results. Can the PES-A04S05 be used on a PES 31000-1M? No, the PES-A04S05 is not suitable for PES 31000-1M; consult the model compatibility list to select the correct cover. How is the product supplied and under which SKU? The item is supplied as a set of five covers; identification is by SKU PES-A04S05, manufactured by KERN. Where is the product manufactured? The protective covers are manufactured in Japan and supplied under the KERN brand. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271
5-Pack Protective Hood For ABP.100-5M, For Scales - KERN
The lightweight protective hood arrives as a 5‑piece set, compatible with ABP.100‑5M scales and designed for quick replacement to reduce downtime; its compact form keeps storage simple while shielding instruments from dust and contamination. Order the protective hood directly via Metav Werkzeuge or ask our consultants if needed. YBA-A06S05 Protective Hood for ABP.100-5M — 5-piece set by KERN The YBA-A06S05 protective hood is a purpose-made cover for the ABP.100‑5M scale, intended to protect weighing equipment from dust and workplace contamination in industrial and workshop environments Compatibility with ABP.100-5M scales Supplied as a 5-piece set Lightweight, approx. 0.1 kg each Keep production running with fitted protection The KERN YBA-A06S05 arrives as a 5‑piece set, providing immediate spares for service intervals and rapid replacement when contamination occurs. Supplied sets cut the need for frequent reordering and reduce machine downtime, which supports steady workflow and predictable maintenance planning. The compact design and lightweight construction make handling and storage straightforward, enabling quick exchange in busy production areas. Practical handling and hygiene benefits explained Made to shield weighing electronics from dust and debris, this protective cover simplifies routine cleaning and lowers the risk of sensor faults. The scale hood is engineered for straightforward fitting onto the ABP.100‑5M, so maintenance time is shorter and calibration stability is supported. By offering a simple barrier against common contaminants, the accessory prolongs intervals between detailed service tasks and helps preserve measurement reliability. Reliable supply and workshop suitability As an accessory intended for workshop and industrial use, the cover supports operational resilience through ready availability in a multi-pack format. Originating from China and manufactured under the KERN label, the item suits environments where frequent replacement or multiple machines require identical protection. For buyers seeking streamlined procurement and consistent component quality, the multi-pack arrangement is well suited to small workshops and larger facility stock management alike. For reliable dust protection and ready spares, choose the KERN YBA-A06S05 5‑piece protective hood from Metav Werkzeuge — contact our consultants at Metav Werkzeuge for tailored advice. Technical data Article number: YBA-A06S05 Manufacturer: KERN GTIN: 4045761213968 Facts Weight: 0.1 kg Tariff code: 39269097 Origin: CN Special features Compatibility: ABP.100-5M Pack: 5-piece set Category: Scales accessory FAQ Is the hood compatible with the ABP.100-5M only? The YBA-A06S05 protective hood is specified for the ABP.100‑5M; compatibility with other models should be verified against the device dimensions and fastening method. How should the protective hood be cleaned? Cleaning can be performed by wiping the cover with a damp cloth and mild detergent; KERN recommends avoiding aggressive solvents that could affect the material. Does the set include replacement parts for multiple scales? The delivery contains five hoods, allowing immediate replacement across several devices or multiple service cycles for a single instrument. Is the product suitable for harsh industrial environments? The hood provides dust and contamination protection suitable for workshop conditions; for extreme chemical or thermal exposures, consult KERN specifications. What is included in the package? The package contains five protective hoods supplied as a set under SKU YBA-A06S05 by KERN. Metav Werkzeuge, Emmerich am Rhein, Germany • Email: info@metav-werkzeuge.com • Phone: +49 2822 7131930 • WhatsApp: +49 170 2837271
5-Pack Protective Hood for ABS.80-4N, Splash Resistant - KERN
The five-piece set delivers quick, low-cost replacement for scale protection, combining compatibility with ABS.80-4N and a very light weight (0.02 kg per hood) for minimal handling effort; order the ACS-A02S05 directly via Metav Werkzeuge or ask our consultants if needed. KERN ACS-A02S05 protective hood — compatible with ABS.80-4N, 5-piece set ACS-A02S05 is a purpose-made protective hood for ABS.80-4N weighing devices, designed to shield sensitive components from dust and incidental contact in workshop and retail environments Pack of 5 protective hoods Compatible with ABS.80-4N scale Lightweight 0.02 kg per hood Consistent protection that keeps weighing equipment ready The ACS-A02S05 protective hood provides straightforward protection for exposed scale interfaces, helping to prevent dust ingress and accidental impact to control surfaces. By supplying a 5-piece pack, routine replacement becomes a rapid, cost-conscious maintenance step that reduces downtime and preserves measurement reliability. The low individual mass contributes to effortless handling during fitment and storage, while the hood’s compatibility with the ABS.80-4N model ensures a precise match to the device’s form factor. This results in fewer fitting errors and a predictable maintenance routine, which in turn supports uninterrupted production or sales operations. Hygienic handling and easy maintenance for workshop workflows A lightweight protective hood simplifies both application and disposal cycles; handling is faster and less demanding for workshop staff, which improves process efficiency. The practical pack size supports scheduled maintenance intervals and local spares storage, ensuring a replacement is always at hand when a hygiene or wear issue occurs. Clear labelling and a uniform fit reduce the chance of incorrect parts being used on the ABS.80-4N, so the protective measure reliably preserves sensitive electronics and contact points. The result is a pragmatic balance between maintenance economy and continued operational precision. Simple logistics and assured compatibility for procurement Choosing a standardised protective hood available as a set streamlines inventory management and purchasing processes. Supplied as a set of identical units, the item supports consolidated ordering and reduces the number of part variants kept in stock. The pack contents and model compatibility eliminate ambiguity in procurement specifications, making it straightforward to include the hoods in routine consumables lists for laboratories, workshops or retail scales. Origin information and product identifiers further support traceability and stock control within the supply chain. For procurement or technical clarification, contact Metav Werkzeuge in Emmerich — Metav Werkzeuge supplies the ACS-A02S05 and can advise on suitability for workshop routines and ordering options Technical data Article number: ACS-A02S05 Manufacturer: KERN GTIN: 4045761184572 Facts Net weight: 0.02 kg Tariff code: 39269097 eCl@ss: 24322502 Special features Pack contents: 5 pieces Compatible with ABS.80-4N Category: Scales – Accessories Origin: CN FAQ What equipment is this protective hood designed for? The ACS-A02S05 protective hood by KERN is designed specifically for use with the ABS.80-4N scale. How many hoods are included in one delivery unit? The product is supplied as a set of five pieces; the pack contains 5 identical protective hoods. What is the weight of a single hood? Each hood has a net weight of 0.02 kg as stated in the product data. Is the material of the hood specified? Material details are not listed in the available product data for the ACS-A02S05 protective hood by KERN. Can this hood be used with other scale models? Compatibility is confirmed for ABS.80-4N; compatibility with other models is not specified in the provided information. KERN — Origin: China
5-Pack Protective Hood for ABT.100-5NM, Accessory for Scales - KERN
Take advantage of a lightweight protective hood compatible with KERN ABT.100-5NM and supplied as a pack of five to keep weighing stations free from dust and contaminants; simple replacement reduces downtime and supports consistent measurement results. Order directly via Metav Werkzeuge or consult our technical advisers for further details. Protective hood ABT-A02S05 for KERN scales — pack of five, lightweight Protective hood ABT-A02S05 designed as a practical accessory for KERN ABT.100-5NM weighing instruments, offering basic protection in workshop and industrial environments Pack of five protective hoods Compatible with ABT.100-5NM scales Lightweight, 0.02 kg each Rapid dispatch from Metav stock Maintain measurement stability with simple protection A small but effective accessory, the protective hood reduces exposure of the weighing area to airborne particles and incidental splashes that can cause measurement deviations. By limiting contamination, the cover helps to minimise calibration drift and supports reproducible readings in daily operations. Its low mass (approx. 0.02 kg per item) means the hood can be fitted and removed without affecting the balance or requiring recalibration procedures, preserving workflow efficiency. Practical supply and easy replacement to cut downtime Supplied as a pack of five, the accessory provides a ready rotation of replacements for routine use or multi-shift environments. This arrangement simplifies stock planning for workshops and metrology departments and reduces the frequency of procurement cycles. As a dedicated accessory for the KERN ABT.100-5NM family of scales, the hood allows maintenance teams to perform quick swaps during scheduled checks, keeping instruments operational and reducing unplanned interruptions. Designed for workshop hygiene and equipment longevity In environments where dust, fibres or incidental residues are present, a protective cover contributes to a cleaner weighing station and less frequent cleaning of sensitive components. The accessory supports a hygienic workplace and can help extend the service intervals of the instrument by protecting vulnerable surfaces. Manufactured in the Philippines and delivered in compact packs, the product meets the practical needs of production floors and quality-control labs seeking low-effort protection for precision equipment. For reliable protection of KERN scales and straightforward replenishment, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to place an order or request advice. Technical Data SKU: ABT-A02S05 GTIN: 4045761185449 Manufacturer: KERN Origin: PH Facts Net weight: 0.02 kg Commodity code: 39269097 eClass: 24322502 Special features Pack contents: 5 pieces Intended for: ABT.100-5NM scales Category: Scales accessories Product group: Protective hoods FAQ What is included in the ABT-A02S05 package? The ABT-A02S05 is supplied as a pack of five protective hoods intended for use with KERN weighing instruments. Is the hood compatible with my ABT.100-5NM scale? Yes, the protective hood is designed specifically for the KERN ABT.100-5NM model and fits the weighing station as an accessory. Will fitting the hood affect scale accuracy? The lightweight construction (approx. 0.02 kg per hood) is intended to be non-intrusive and should not affect the balance when applied or removed under normal use. Where is the product manufactured? The ABT-A02S05 protective hood is manufactured in the Philippines. Manufacturer: KERN — Origin: PH
5-Pack Protective Hood For CXB Counting Scale, Hygiene Covers - KERN
Take advantage of the combination of precise compatibility with KERN counting scales, a practical five-pack supply and lightweight handling for uninterrupted counting operations — order the protective hoods directly via Metav Werkzeuge or contact our consultants for tailored advice. KERN CXB-A01S05 Protective Hood for CXB Counting Scales — 5-pack, lightweight A KERN CXB-A01S05 protective hood designed to shield CXB counting scales and maintain reliably clean weighing environments in production and inspection areas. Pack of five protective hoods Compatible with KERN CXB counting scales Lightweight and simple to fit Keep counting accuracy intact with targeted protection The primary purpose of this protective hood is to reduce contamination and incidental contact that can affect scale readings on counting equipment. Designed for use with KERN CXB models, the cover supports consistent results by limiting dust and debris accumulation around the weighing chamber. In practical terms, fewer interruptions for cleaning mean smoother throughput and reduced measurement uncertainty for repetitive counting tasks. Quick handling and low-maintenance support for busy benches Supplied as a five-pack, these covers ensure readily available replacements and support multi-station operations without frequent procurement. The low mass (approx. 0.1 kg) makes them effortless to lift and position, while the simple design permits fast fitting and removal during routine checks. Reduced handling time translates into measurable efficiency gains at the point of use and helps maintain production rhythm. Practical choice for assembly lines and inspection stations The compact protective covers are particularly useful where counting scales are used in repetitive batch processes or quality-control checks. By preserving the operational environment of the scale, the covers help sustain measurement repeatability over prolonged runs. Their compatibility with counting-scale models limits the need for custom solutions and supports standardised workplace routines in workshops and light industrial settings. Contact Metav Werkzeuge for application advice or to secure a five-pack supply; our specialists in Emmerich am Rhein will confirm compatibility and delivery options via info@metav-werkzeuge.com or +49 2822 7131930, WhatsApp +49 170 2837271 Technical data SKU: CXB-A01S05 GTIN: 4045761185302 Manufacturer: KERN Country of origin: CN Net weight: 0.1 kg Facts Pack quantity: 5 pieces Commodity code: 39269097 eClass: 24322502 Special features Protective hood for counting scales Compatible with KERN CXB counting scales Supplied as a five-pack Lightweight and easy to handle FAQ Are these covers compatible with all KERN CXB models? The covers are specified for use with KERN CXB counting scales; compatibility should be confirmed against the exact CXB model designation. How many covers are included in one package? Each package contains five protective hoods, providing spares for multiple stations or routine replacement. Can the protective hoods be cleaned on the bench? The hoods can be wiped clean to maintain hygiene and prevent contamination; follow standard workshop cleaning procedures appropriate for the operating environment. Will these covers affect weighing performance? When fitted correctly, the covers minimise external contamination while preserving the intended weighing function of the CXB counting scales. Manufacturer: KERN; Seller: Metav Werkzeuge, Emmerich am Rhein; Contact: info@metav-werkzeuge.com · +49 2822 7131930 · WhatsApp +49 170 2837271
5-Pack Protective Hood For DBS.60-3 Moisture Analyser, Disposable - KERN
Secure consistent operator protection in moisture analysis by combining direct compatibility with KERN DBS moisture analysers, a practical pack of five for rapid replacement, and a lightweight design for easy handling. Order or consult Metav Werkzeuge for tailored advice and reliable supply from Emmerich. Protective hood for DBS.60-3 — 5-piece set by KERN A robust protective hood designed for use with KERN DBS moisture analysers, providing operator protection and contamination control in laboratory and workshop environments. Compatible with KERN DBS moisture analysers Supplied as a 5-piece set Lightweight for easy handling Suitable for laboratory and workshop use Ensure safe moisture determination with targeted operator protection The protective hood offers a clear operational benefit by shielding the operator and the immediate workspace during moisture determination. Designed for use alongside KERN DBS moisture analysers, the hood reduces direct exposure to fumes or particulates generated by the heating process and supports consistent measurement conditions. The compatibility with established moisture analysers ensures that the safety accessory integrates without modification, maintaining the analyser's performance while protecting staff and samples. Keep production moving with a practical pack solution Supplied as a pack of five, the set reduces downtime by allowing quick replacement after contamination or wear. For busy workshops and quality-control labs, having multiple units on hand supports continuous operation and streamlines routine maintenance. The lightweight construction facilitates handling during replacement and storage, while the compact form helps conserve bench space without compromising on protective function. Simple fitting and clear maintenance advantages Installation is straightforward and designed for rapid fitting to the corresponding moisture analyser model, minimising time spent on tool changes. As a disposable or easily cleanable accessory, the hood supports hygienic procedures and simple upkeep, which is particularly valuable in regulated production environments. The accessory's role in preserving measurement integrity is explained in plain terms, helping less technical staff understand how a physical barrier contributes to repeatable results. Trusted sourcing and reliable workshop supply Selecting KERN accessories through Metav Werkzeuge aligns technical quality with dependable logistics. Metav's role as a quality filter for the European market and its stock in Emmerich provide assurance of consistent availability and straightforward procurement for industry and trade. The accessory complements a centralised procurement strategy, supporting the reduction of supplier complexity while maintaining the standards required for precision measurement. Choose the KERN protective hood pack via Metav Werkzeuge for dependable operator protection and immediate workshop readiness—contact the Emmerich team for tailored advice and fast order processing Technical data Article number: DBS-A03S05 Manufacturer: KERN SKU: DBS-A03S05 GTIN: 4045761184701 Country of origin: CN Tariff number: 39269097 Core specifications Weight: 0.05 kg Pack contents: 5 pieces Special features Compatible with moisture analysers KERN DBS Accessory for scales / moisture analysers Category: Accessory (Zubehör) FAQ Is this accessory compatible with all KERN moisture analysers? Compatibility is specified for KERN DBS moisture analysers; the protective hood fits the DBS series and is supplied as SKU DBS-A03S05. How many hoods are included in one delivery unit? The delivery unit contains five hoods, supplied as a pack of five for rapid replacement and stock management. Can the hood be cleaned and reused? The hood is designed for straightforward cleaning or replacement; either option supports hygienic procedures and helps maintain measurement integrity with KERN analysers. Does the hood affect measurement accuracy of the analyser? The hood is intended to protect the operator and immediate workspace while preserving the analyser's operating conditions; correct fitting ensures the analyser's performance is maintained Metav Werkzeuge, Emmerich am Rhein, eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271
5-Pack Protective Hood For FOB, Disposable Lightweight, For Scales - KERN
Take advantage of a compact, compatible solution that combines hygienic protection and simple stock handling; the pack format and low unit weight support efficient workflows. Order directly via Metav Werkzeuge or consult our advisors for tailored delivery options. KERN Protective Hood FOB-A05S05 — Pack of 5, for FOB scales The KERN protective hood for FOB scales offers hygienic coverage for weighing stations and is intended for use where contamination control at the scale interface is required. Pack contains 5 protective hoods Compatible with FOB scale series Lightweight: 0.02 kg each Fast dispatch from Emmerich warehouse Minimise contamination at weighing points with practical hygienic protection The protective cover delivers targeted hygienic protection for scale touchpoints and sample areas, reducing contamination risk during routine weighing operations. The simple, single-layer design ensures a barrier between product and instrument surfaces while preserving access to controls and displays. For industrial metrology and retail weighing environments, this solution supports compliance efforts and helps maintain measurement reliability by keeping sensors and housings free from dust and residues. The combination of low unit weight and compact format makes storage straightforward and reduces logistic overhead. Seamless compatibility with FOB scales for uninterrupted workflows Designed specifically for the FOB range, the cover guarantees a secure fit on the scale housing and around operator-accessible zones, ensuring that instrument function is not compromised. Compatibility with the FOB series simplifies procurement and stocking decisions, since the same accessory can be deployed across multiple units in a workshop or production line. The result is less downtime for equipment preparation and quicker changeovers between tasks, contributing to improved process efficiency and predictable measurement results. Reliable supply format and logistical advantages for workshops and retailers Supplied as a pack of five, the set reduces the frequency of reordering and eases small-batch replenishment for service benches and point-of-sale locations. Each hood is lightweight (0.02 kg), enabling cost-effective transport and compact storage on-site. Shipping is handled from the European distribution centre, supporting dependable delivery times and straightforward stock replenishment. Combined with Metav’s commitment to quality distribution, this accessory helps maintain continuity in daily operations and simplifies vendor management for procurement teams. Contact Metav Werkzeuge for availability, delivery options and technical advice on the KERN protective hood FOB-A05S05; our Emmerich team will assist with stocking and logistics details Technical Data Article number: FOB-A05S05 Manufacturer: KERN SKU: FOB-A05S05 GTIN: 4045761187429 Facts Weight: 0.02 kg Tariff number: 39269097 eClass: 24322502 Special features Pack contains 5 protective hoods Designed for FOB scale series Product group: Scales accessories Country of origin: CN FAQ Are these hoods compatible with FOB scales? Yes. The KERN protective hood FOB-A05S05 is designed for compatibility with the FOB scale series and fits the intended housings without affecting display or controls. How many hoods are included in one delivery unit? The delivery unit contains five protective hoods; the pack format is described as pack of five for convenient replenishment. What is the weight of a single hood? Each protective hood weighs 0.02 kg, allowing compact storage and economical transport. Manufacturer: KERN · Origin: China · Dealer contact: Metav Werkzeuge, Emmerich am Rhein · Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271
5-Pack Protective Hood for FOB-S, For Scales Accessories - KERN
Protective cover for FOB‑S scales that combines hygiene, simple replacement and compact storage; supplied as a five-piece set for fast replenishment. Benefit from a lightweight accessory that reduces downtime and helps maintain measuring accuracy. Order the FOB‑A11S05 directly via Metav Werkzeuge or ask our consultants if needed. FOB-A11S05 protective hood for FOB‑S scales — KERN The FOB-A11S05 is a protective hood for FOB‑S scales, designed to keep weighing equipment clean and shielded in workshop and retail environments. Pack of 5 protective hoods Compatible with FOB‑S scale series Lightweight: 0.08 kg per unit Rapid dispatch from Metav warehouse Keep scales accurate and hygienic with minimal effort The protective hood offers practical protection that prevents dust and light contamination from affecting weighing results. Used as a simple barrier, this accessory helps to maintain measurement accuracy and reduces the frequency of maintenance cycles. For businesses that rely on repeatable weighing — from production benches to checking stations — the cover acts as a cost-effective measure to preserve instrument performance and calibration intervals. Practical handling and fast replacement to reduce downtime Supplied as a pack of five, the set allows straightforward rotation: one hood on the scale, spares ready for immediate replacement. The low individual weight (0.08 kg) makes storage and handling uncomplicated, while the compact format means spare parts take little room in a workshop trolley or service kit. This convenience decreases interruption to processes and supports efficient workflows in busy industrial and commercial environments. Compatibility and supply assurance from a trusted partner Designed as an accessory for the FOB‑S series from KERN, the covers integrate into existing equipment ranges without modification. With Metav’s logistics presence in Emmerich and a broad product portfolio, restocking is straightforward and transparent — especially important for operations that require consistent supply. The combination of established manufacturer compatibility and reliable delivery supports uninterrupted operations and predictable procurement planning. For quick replenishment of scale accessories, rely on KERN quality and order the FOB‑A11S05 via Metav Werkzeuge in Emmerich, or request additional information from our consultants at info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: FOB-A11S05 Manufacturer: KERN GTIN: 4045761184626 Country of origin: CN Scope of delivery: 5 protective hoods Facts Weight: 0.08 kg Tariff number: 39269097 eClass: 24322502 Special features Compatible with FOB‑S scales Accessory for weighing equipment Rapid dispatch available from Metav stock FAQ What is included in the delivery? The delivery comprises a five-piece set of protective hoods (FOB-A11S05), supplied as a single pack. Which scales are these hoods compatible with? The covers are compatible with the FOB‑S series and intended as an accessory for KERN weighing equipment. How heavy is each hood? Each hood has a weight of 0.08 kg. Where is the product manufactured? The product origin is listed as CN (China). Are these hoods suitable for workshop use? Yes, the FOB-A11S05 is designed to provide light protection in workshop and commercial weighing environments. KERN — Manufacturer (origin: CN); For orders and enquiries: Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com, +49 2822 7131930
5-Pack Protective Hood For KXS-TM, For Scales, Quick-Fit, CN - KERN
Benefit from a combination of reliable protection, broad compatibility and straightforward replacement to keep weighing processes uninterrupted; order the accessories directly via Metav Werkzeuge or consult our specialists for further advice. KXS-A07S05 Protective Hood — Pack of 5 for KXS‑TM scales by KERN The KXS-A07S05 protective hood provides a practical cover for workshop and industrial weighing stations, designed to shield KXS‑TM scales from dust and incidental splash while preserving measurement reliability. Pack of 5 for immediate replacement Compatible with KXS‑TM scale models Lightweight design for quick fitting Suitable for workshop and industrial use Preserve measurement accuracy with targeted protection A dedicated protective hood reduces the risk of contamination on the weighing surface and surrounding sensors, helping to maintain consistent results. The hood’s compatibility with KXS‑TM models ensures a correct fit that minimises reset intervals and calibration drift. By preventing dust ingress and incidental splashes, the cover supports uninterrupted operation and reduces the need for frequent cleaning cycles, which in turn contributes to improved process efficiency and fewer production delays. Fast servicing and low operational downtime The cover has been conceived as a simple, replaceable accessory that allows for rapid swapping during routine maintenance. The lightweight construction keeps handling straightforward, while the design avoids time‑consuming fastening procedures. This means less time at the bench for maintenance staff and quicker return to measurement tasks. When integrated into a scheduled maintenance plan, the hood helps to sustain throughput and promotes predictable operational availability. Practical supply and workshop compatibility Delivered as a multi‑unit set, the accessory is tailored for workshops and service departments that require immediate spares on hand. The item’s design is focused on functional protection rather than decorative features, which keeps procurement and inventory management efficient. Where hygienic or controlled environments are in use, the cover acts as an additional barrier that complements established cleaning routines without introducing complex handling requirements. For tailored advice or to secure this KERN protective hood set quickly from Metav Werkzeuge, contact our consultants by email or phone and benefit from local stock and direct supply from Emmerich. Technical Data Article number: KXS-A07S05 Manufacturer: KERN SKU: KXS-A07S05 Facts Net weight: 0.01 kg Tariff code: 39269097 eCl@ss: 24322502 Special features Compatibility: for KXS‑TM scales Pack contents: set, delivery includes five pieces Origin: CN FAQ Is the hood compatible with other KERN models? The KXS-A07S05 hood is specified for KXS‑TM scales; compatibility with other KERN models is not stated and should be confirmed before purchase. What material is the protective hood made of? Material data is not provided for the KXS-A07S05; refer to product documentation or consult Metav Werkzeuge for detailed specifications. Is the cover intended to be disposable or reusable? The KXS-A07S05 is supplied as a replaceable accessory set; reuse depends on contamination level and internal maintenance policies. How is the hood fitted to the weighing instrument? Fitting is straightforward and designed for quick placement on the KXS‑TM housing to restore protection with minimal downtime. Where is the product manufactured? The KXS-A07S05 protective hood is manufactured in China KERN — Origin: China — Tariff code: 39269097
5-Pack Protective Hood For RIB And CIB Scales, Protective Cover - KERN
Choose a practical solution that combines compatibility with KERN RIB and CIB scales, a pack of five spares and uncomplicated replacement to keep measurement processes running smoothly. Order the protective hood directly via Metav Werkzeuge or consult our team for advice. Protective Hood RIB-A01S05 by KERN — Pack of 5, for RIB and CIB scales A Protective Hood RIB-A01S05 designed to protect KERN RIB and CIB scales from dust and incidental contamination in workshop and laboratory environments Pack of 5 protective hoods Compatible with KERN RIB and CIB scales Lightweight accessory, easy storage Simple fit for rapid replacement Preserve measurement accuracy through effective contamination control The protective cover acts as a first line of defence against dust, splash and particulate intrusion, helping to maintain measurement accuracy and reducing the frequency of service interventions. By preventing contaminants from reaching sensitive weighing surfaces and load cells, the hood supports longer calibration intervals and a more reliable production flow. This feature is particularly relevant in busy metrology environments where even small deposits can affect repeatability. Maintain uptime with ready spares and quick replacement Supplied as a pack of 5, the accessory ensures immediate availability of replacements so routine operations are not interrupted. Rapid swap-out of an affected cover is straightforward and designed to be carried out without specialised tools, which contributes to reduced downtime and simpler maintenance planning. Keeping spare hoods on the shelf is a practical, cost-efficient measure to protect precision equipment and streamline workshop logistics. Fit for metrology workflows and professional environments Engineered for compatibility with RIB and CIB scale series, the cover integrates into established weighing setups without modification, preserving the instrument’s operational footprint and handling characteristics. The straightforward design supports consistent handling in production and lab settings and aligns with the demands of quality-conscious workshops. Where product longevity and stable readings matter, this accessory complements the broader KERN metrology offering. For reliable spare covers for KERN devices, request the RIB-A01S05 pack from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to confirm suitability for specific models and arrange delivery Technical Data Article number: RIB-A01S05 Manufacturer: KERN GTIN: 4045761185258 Facts Weight: 0.15 kg Tariff code: 39269097 eCl@ss: 24322502 Origin: CN Special features Pack size: 5 pieces Compatible with RIB and CIB scale models Category: Scales accessories (Waagen Zubehör) Retail description: Protective hood, 5 items included FAQ Which scale models are compatible with these protective hoods? The protective hood is intended for use with KERN RIB and CIB scale series; compatibility is specified for the RIB-A01S05 accessory. How many hoods are supplied with one order? The RIB-A01S05 is supplied as a pack of 5 protective hoods. Will using the hood affect weighing results? The hood is designed to protect the weighing surface; when fitted correctly it preserves measurement accuracy by preventing contamination rather than influencing readings. How simple is it to replace a worn or soiled hood? Replacement is designed to be rapid and requires no specialised tools, supporting fast swap-out and minimal interruption to workflows. KERN — Origin: China; GTIN: 4045761185258; Tariff code: 39269097
5-Pack Protective Hood for RPB, Disposable Lightweight - KERN
Combine hygienic protection, lightweight handling and direct compatibility with RPB systems to maintain uninterrupted weighing operations. Order the KERN protective hood directly via Metav Werkzeuge or consult our specialists for tailored procurement advice. KERN RFC-A02S05 protective hood for RPB — lightweight, compatible accessory The KERN RFC-A02S05 protective hood offers targeted protection for weighing applications, functioning as an accessory for RPB systems to reduce contamination and support reliable measurement results in laboratory and industrial settings. Pack of 5 protective hoods Compatible with RPB weighing systems Lightweight, 0.15 kg total weight Maintain clean processes and reliable readings To keep measurement results consistent and repeatable, a reliable barrier against dust and incidental contamination is essential. This protective hood provides hygienic protection for weighing stations, helping to preserve instrument accuracy and reduce the frequency of cleaning-related downtime. Where trace contamination can affect outcomes, a fitted hood functions as a simple preventive measure that supports process stability and consistent data quality. Quick replacement and minimal handling effort Designed for straightforward handling, the accessory is easy to fit and replace, which speeds routine maintenance and reduces interruptions on the bench. The low package weight contributes to simple storage and replenishment, enabling rapid swaps during shift changes. By shortening maintenance cycles, the hood supports higher operational throughput and contributes to a more efficient workflow around precision scales and balances. Integration into standard weighing workflows As an accessory intended for use with RPB devices, the hood integrates with existing weighing setups without the need for additional adapters. Its purpose is to protect both the instrument and the immediate working environment, supporting cleaner conditions that complement good measurement practice. For workshops and laboratories aiming to streamline procedures, this solution minimises the need for ad hoc protective measures and standardises a clean working routine. Practical considerations for procurement and use This accessory is distributed as a multi-item supply designed to ensure availability when replacements are needed. The compact nature of the kit reduces storage footprint and simplifies inventory management for maintenance teams. While material specifications are not detailed in the product data, the component is presented as a practical accessory from a recognised manufacturer, suitable for routine protective use in weighing and inspection tasks. Secure this KERN accessory through Metav Werkzeuge for dependable spare-part supply and procurement support — contact Metav Werkzeuge via email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for expert assistance and ordering. Technical data SKU: RFC-A02S05 Manufacturer: KERN Country of origin: CN Tariff code: 39269097 ECLASS: 24322502 Weight: 0.15 kg Facts Category: Scales accessory Product group: Protective hoods / work safety covers Suitable for: RPB weighing systems Special features Included: pack of five protective hoods Intended use: protection of weighing devices and operator environment Fast dispatch noted in shop description SKU reference: RFC-A02S05 FAQ What is the primary function of the protective hood? The KERN RFC-A02S05 protective hood is designed to shield weighing stations and the immediate working area from dust and incidental contamination, supporting more stable measurement results. Is the hood compatible with specific weighing systems? Yes, the accessory is listed as compatible with RPB weighing systems and is categorised as a scales accessory for integration into standard setups. How is the product supplied? The item is supplied as a multi-piece pack; the product data specifies inclusion of five protective hoods under SKU RFC-A02S05. What is the weight of the supply? Product data records a total weight of 0.15 kg for the packaged item. Are material and coating details available? Material and coating are not specified in the provided product data for the KERN RFC-A02S05 protective hood; further technical details are not included in the data sheet. KERN — Manufacturer; country of origin: CN
5-Pack Protective Hood Over Keyboard And Housing, For Scales, Washable - KERN
Protect valuable weighing electronics by combining a simple keyboard and housing protective cover with the convenience of a pack format and lightweight handling; order directly via Metav Werkzeuge or consult the specialists for fit and availability. KERN ALJ-A01S05 Protective Cover — durable keyboard and housing protection, pack format The ALJ-A01S05 protective cover is designed to shield scale keyboards and housings in industrial and workshop settings, offering a practical barrier against contamination while preserving device functionality. Protective cover for keyboard and housing Supplied as a pack of 5 pieces Lightweight design at 0.02 kg Suitable for scales and measurement units Reduce maintenance and downtime with straightforward protection The protective cover provides a cost-effective barrier that helps keep keyboards and housings free from dust and light contamination, reducing the need for frequent cleaning and maintenance. By preventing ingress of particles and debris, sensitive components are less likely to require service interruptions, which supports a more efficient production flow. The slim design ensures that the control surfaces remain accessible while receiving reliable coverage, supporting continued measurement accuracy in everyday use. Practical pack format for workshops and multi-unit environments Delivered as a pack of 5, this solution simplifies inventory management for workshops and inspection stations, enabling rapid replacement and consistent protection across several workstations. The compact weight of 0.02 kg per item keeps storage and handling straightforward, while the standard dimensions are suitable for common scale housings. Clear labelling and bulk supply reduce procurement cycles and help maintain uninterrupted operation of weighing equipment. Built for compatibility and simple deployment Manufactured by KERN, the cover is tailored for use over keyboards and housings associated with scales and related measuring devices. The accessory is particularly useful for environments where particulate contamination or incidental spillovers are a concern and where easy-to-change protective elements are preferred. Its design supports quick fitting and disposal or replacement, aligning with routine maintenance practices and operational hygiene requirements. Contact Metav Werkzeuge to secure KERN protective covers (ALJ-A01S05) — our consultants will advise on suitability and ensure prompt dispatch from Emmerich. Technical data Article number: ALJ-A01S05 Manufacturer: KERN SKU: ALJ-A01S05 GTIN: 4045761184589 Origin: China Facts Weight: 0.02 kg Tariff code: 39269097 Special features Pack contents: 5 protective covers Application: protection for keyboards and housings of scales Category: scale accessories FAQ Is the ALJ-A01S05 cover compatible with common scale keyboards? The ALJ-A01S05 protective cover by KERN is designed for use over keyboards and housings typical of scale equipment and offers broad compatibility with standard control surfaces. How is the product supplied and what is included? The product is supplied as a pack of 5 protective covers (ALJ-A01S05), allowing for multiple replacements or coverage across several devices. Can the cover be used in production and laboratory environments? Yes, the KERN protective cover is suitable for industrial and workshop settings where protection of measuring electronics and hygiene are priorities. Does the cover add significant weight or bulk to the device? The cover has a lightweight design at approximately 0.02 kg and is intended to provide protection without impairing access to controls or significantly altering the device profile. Where can information about ordering and availability be obtained? For ordering details and availability of the KERN ALJ-A01S05 protective cover, contact Metav Werkzeuge; consult the product listing or reach out for advice on stock and dispatch. Manufacturer: KERN; Origin: China; Contact: info@metav-werkzeuge.com | +49 2822 7131930
5-Set Protective Hood for 572-30, Pack of 5 - KERN
Take advantage of the combination of effortless replacement, precise compatibility and lightweight handling to keep weighing stations operational with minimal downtime. Order the KERN accessory directly via Metav Werkzeuge or ask our consultants for further advice. KERN 572-A02S05 Protective Hood — Compatible with 572-30, lightweight The KERN 572-A02S05 protective hood offers straightforward protection for the 572-30 weighing unit, designed for workshop and industrial environments where reliable accessory supply and easy servicing matter. 5-piece set for immediate replacement Compatible with 572-30 weighing unit Lightweight protective cover, 0.02 kg Minimise downtime with readily available spare covers A 5-piece set of protective hoods supplies immediate spares for routine rotation, reducing interruptions during busy shifts. The compact and lightweight design at 0.02 kg each allows quick handling and replacement without recalibration delays. This translates into measurable time savings on small maintenance tasks and ensures that the weighing equipment remains protected during peak operation periods, supporting continuous workflow efficiency. Tailored protection for precision weighing equipment The protective hood is compatible with the 572-30 weighing unit, providing a precise fit that reduces the risk of contamination affecting measurement accuracy. By preserving the instrument housing during normal use and storage, the hood supports consistent performance and extends service intervals. The accessory from KERN acts as a practical barrier, simplifying workshop routines while maintaining measurement integrity for industrial and trade applications. Practical handling and workshop logistics made simple Supplied as a set, the cover supports straightforward stock management and rapid replacement cycles in production environments. The small footprint and low weight make storage and transport within the workshop easy, while the clear designation as a scale accessory streamlines procurement and spare-part planning. Integration into existing maintenance schedules is uncomplicated, helping to uphold uptime and operational readiness with minimal administrative effort. For reliable supply and compatibility checks of KERN accessories, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange dispatch from our central stock. Technical data Article number: 572-A02S05 Manufacturer: KERN Origin: DE GTIN: 4045761185418 Tariff number: 39269097 Core data Weight: 0.02 kg Set contents: 5 pieces SKU: 572-A02S05 eClass: 24322502 Special features Compatible with 572-30 weighing unit Product category: Scales accessories Product group: Work protection hoods Country of origin: Germany FAQ Is this hood a direct replacement for the 572-30? The KERN 572-A02S05 protective hood is designed specifically for compatibility with the 572-30 weighing unit and serves as a direct accessory for that model. How many covers are supplied with the SKU 572-A02S05? The delivery contains a set of five covers, enabling rotation and quick replacement without interrupting workflows. Can the protective hood be used in a workshop environment? Yes, the hood is intended as a workshop accessory to protect the weighing unit during normal operation and storage, supporting reliable measurement performance. Manufacturer: KERN, Origin: Germany, GTIN: 4045761185418
5-Set Protective Hood For FOB-ML And FOB-NL, For Scales Accessories - KERN
Benefit from a practical combination of broad model compatibility, compact storage and simple replacement: the protective hoods keep weighing equipment free from contamination while reducing downtime through rapid swap-outs. Order the pack conveniently via Metav Werkzeuge or consult our specialists for application advice. Protective Hood FOB-A13S05 (Pack of 5) by KERN — Accessory for FOB-ML / FOB-NL The Protective Hood FOB-A13S05 is a purpose-made cover for FOB-ML and FOB-NL scales, designed to protect displays and housings from dust and light contamination in workshop and industrial environments Five-piece set for immediate replacement Compatible with FOB-ML and FOB-NL models Weight 0.08 kg for minimal bulk Preserve measurement reliability with simple protection The Protective Hood FOB-A13S05 provides a straightforward way to preserve the precision of weighing instruments by acting as a barrier against dust and incidental splashes. Fitted over the relevant housing and display areas, the cover reduces the risk of contamination-related deviations and extends intervals between cleanings, thereby supporting consistent measurement accuracy. As an accessory from KERN, the hood fits established FOB series models and helps maintain production quality without complex procedures. Reduce downtime with a compact, ready-to-stock solution Keeping a small stock of these covers means fast replacement and minimal interruption to daily operations. Supplied as a pack of five, the set is intended to simplify logistics for workshops and service departments: one SKU covers multiple models and replacement cycles. The low weight and compact format support efficient storage and transport, enabling swift replenishment of protective elements and a smoother workflow in scale maintenance and service tasks. Order and specification details for procurement clarity For purchasing and inventory, the item is identified by the SKU FOB-A13S05 and carries a GTIN for system entry. The product is manufactured by KERN and supplied from the established European distribution channel handled by Metav Werkzeuge, which aims to provide reliable availability and transparent order processing from Emmerich. The clear compatibility statement for FOB-ML and FOB-NL reduces uncertainty when selecting spare parts, ensuring procurement contributes directly to operational readiness and equipment longevity. Contact Metav Werkzeuge for supply and suitability information on the KERN protective hood FOB-A13S05 — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss availability and fitment Technical data Article number: FOB-A13S05 Manufacturer: KERN GTIN: 4045761184640 Country of origin: CN Package contents: 5 pieces Weight: 0.08 kg Tariff code: 39269097 eClass: 24322502 Facts Weight 0.08 kg GTIN 4045761184640 Tariff code 39269097 eClass 24322502 Special features Compatible with FOB-ML and FOB-NL Pack of five protective hoods Category: Scales > Accessories Supplied by manufacturer KERN FAQ What is the primary purpose of this protective hood? The protective hood FOB-A13S05 is designed to shield scale displays and housings from dust and light contamination, helping to maintain reliable readings for FOB-ML and FOB-NL instruments. How many covers are included with one article number? One article FOB-A13S05 is supplied as a pack of five protective hoods, intended for quick replacement and reduced downtime. Is the hood suitable for all FOB series models? The cover is specified for use with FOB-ML and FOB-NL models; compatibility with other series should be confirmed against device dimensions or technical documentation. Who manufactures this accessory and how is it identified? The accessory is manufactured by KERN and identified by SKU FOB-A13S05 and GTIN 4045761184640 for procurement and inventory systems. Can these hoods be kept in stock to speed up maintenance? Yes; the five-piece pack and light weight make the hoods convenient to store and deploy as part of routine maintenance spares for weighing equipment. KERN • Origin: China • GTIN: 4045761184640
5-Way Relay Output Module For Precision Scales, Three-Point Tolerance Switching - KERN
Take advantage of precise control, reliable integration and compact design to automate signalling and actuation for weighing processes; order or request integration advice via Metav Werkzeuge for seamless supply and expert support. PES-A02 — KERN relay output module, 5 outputs, 3 tolerance ranges The PES-A02 is a relay output module for integration with KERN PES/PEJ precision scales, providing five control outputs mapped to three weighing tolerance zones for automated signalling and process control Five relay outputs for external control Three tolerance zones for precise switching Designed for KERN PES/PEJ precision scales Compact module, 0.06 kg lightweight build Precise switching for automated production flows The relay outputs on this module translate weight results into deterministic control signals, enabling timed actions such as stopping conveyors, triggering signal lamps or actuating valves. With five outputs assigned to three tolerance zones, the module supports clear acceptance, rejection and warning states; this allows programmable process thresholds and reduces manual intervention. The deterministic switching contributes to reproducible cycle times and consistent product quality, which is particularly relevant where traceability and repeatability are required in industrial weighing operations. Seamless integration with KERN weighing systems Designed specifically for use with KERN PES/PEJ precision scales, the module offers plug-and-play compatibility where the hardware interface is supported at manufacture. Because the module is not retrofittable, it is intended to be specified with new scales or installed where the original equipment includes the necessary interface. This design decision eliminates ambiguity in field upgrades and ensures electrical and protocol compatibility, reducing the risk of installation errors. The compact housing and low mass make it practical for constrained control cabinets or direct panel integration. Clear signals that reduce downtime and inspection effort By converting weighing outcomes into discrete relay states, the module simplifies downstream automation and visual inspection. The clear mapping to three tolerance ranges helps separate marginal results from clear pass/fail conditions, which assists line operators and reduces stoppages for manual checks. Manufactured by KERN with origin in Japan, the module emphasises robust switching behaviour for industrial environments and supports common external devices such as relays, lamps and solenoid valves. The lightweight design and straightforward wiring layout support efficient assembly and predictable serviceability during planned maintenance. Contact Metav Werkzeuge for tailored integration advice on the KERN relay output module PES-A02 — email info@metav-werkzeuge.com or call +49 2822 7131930 for specification matching and order support Technical Data Article number: PES SKU: PES-A02 Manufacturer: KERN GTIN: 4045761078253 Country of origin: JP Facts Outputs: 5 Tolerance zones: 3 Weight: 0.06 kg Tariff number (CN): 90160010 eClass: 19070405 Special features Suitable for use with KERN PES/PEJ precision scales Not retrofittable Enables connection to relays, signal lamps and valves Compact, lightweight module for panel or cabinet mounting FAQ What devices can be driven by the relay outputs of this module? The PES-A02 relay output module from KERN can drive external relays, signal lamps and valves via its five relay contacts, enabling direct actuation or signalling based on weighing results. Is the module compatible with all KERN scales? The module is designed specifically for KERN PES/PEJ precision scales; compatibility with other models is not guaranteed and should be confirmed before ordering. Can the relay output module be added to an existing scale in the field? The PES-A02 is not retrofittable; it is intended to be specified as part of systems that support the interface at the point of manufacture or initial configuration. How are the tolerance zones used in practice? The three tolerance zones provide discrete thresholds for pass, reject and warning states; mapping these to the five outputs allows flexible control logic for automated sorting or process interlocks. Manufacturer: KERN — Origin: Japan — further contact information not provided
50 g Precision Pocket Scale 0.001 g Readability LCD Touch, Stainless Steel Pan, USB, 65 mm - KERN
Take advantage of fine accuracy, robust handling and flexible power options to streamline small-part weighing. The compact design with a stainless steel pan and 0.001 g readability ensures reliable results for jewellery, gemstones and laboratory samples; order via Metav Werkzeuge or consult our specialists for application advice. TGD.50-3CS05 — Precision pocket scale, 50 g capacity, 0.001 g readability (KERN) The TGD.50-3CS05 is a precision pocket scale intended for accurate weighing of jewellery, gemstones and small laboratory samples, combining a compact housing with a hygienic stainless steel weighing surface for mobile or bench-top use. *Readability 0.001 g for ultra-fine measurement *Capacity 50 g with stainless steel pan *Touch LCD with 20 mm digits, backlit *USB power and 4 × 1.5 V AAA batteries included Precision that supports confident decisions The instrument delivers a readability of 0.001 g and a linearity of ±0.003 g, values that translate into dependable differentiation of minute weight changes often required in jewellery appraisal and analytical tasks. Readability specifies the smallest display increment, while linearity indicates how closely the scale's response follows a straight line across its range; together these metrics provide a clear indication of measurement quality. The reproducibility 0.003 g confirms stable repeat readings, reducing the need for repeated checks and accelerating routine workflows in retail and laboratory environments. Built for fast handling and clear readout A backlit LCD touch display with a 20 mm digit height simplifies reading under varied light conditions, and the touch-sensitive panel allows quick switching between units (g, ct, gn, dwt, ozt, oz) with minimal training. The stainless steel weighing pan is hygienic and easy to clean, while the fold-over cover protects the sensor from pressure and dust during transport. The scale uses a strain gauge weighing system, a common and robust technology that converts force into an electrical signal for reliable measurements; this makes routine maintenance straightforward and supports long-term consistency. Portable design with practical power options The housing dimensions of 96 × 149 × 36 mm and a pan diameter of 65 mm make the device genuinely portable without compromising usability. Power is provided via the included USB cable or the supplied 4 × 1.5 V AAA batteries, offering up to 150 h of operation on battery power and an AUTO-OFF function after five minutes to preserve energy. Supplied weighing dish and intuitive controls reduce setup time; the combination of compact dimensions and durable components suits shop counters, fieldwork and hobbyist use where precision must be mobile and dependable. Contact Metav Werkzeuge to discuss how the KERN TGD.50-3CS05 precision pocket scale with 0.001 g readability fits specific jewellery, laboratory or hobby applications — our Emmerich team will advise on suitability and supply details Technical data Article number: TGD SKU: TGD.50-3CS05 GTIN: 4045761217904 Manufacturer: KERN Country of origin: CN Facts Weighing range: 50 g Readability: 0.001 g Linearity: ±0.003 g Reproducibility: 0.003 g Weighing pan diameter: 65 mm Display digit height: 20 mm Special features Housing: plastic; weighing pan: stainless steel Display: LCD touch, backlit, touch-sensitive Units: g, ct, gn, dwt, ozt, oz Power: USB cable included; 4 × 1.5 V AAA batteries included Battery run time: up to 150 h Auto-off: after 5 minutes Weighing system: strain gauge Delivered as a set FAQ What level of accuracy can be expected from this scale? The KERN TGD.50-3CS05 offers a readability of 0.001 g with linearity of ±0.003 g, delivering fine accuracy suitable for jewellery and small laboratory tasks. Which units can be displayed on the scale? The pocket scale supports grams, carats, grains, pennyweights, troy ounces and ounces (g, ct, gn, dwt, ozt, oz) selectable via the touch display on the TGD.50-3CS05. How is the scale powered for mobile use? Power comes from a supplied USB cable or the included 4 × 1.5 V AAA batteries; battery operation can last up to 150 h, with an AUTO-OFF function to conserve energy. Is the weighing surface easy to clean and maintain? Yes—the stainless steel weighing pan is hygienic and simple to wipe clean; the fold cover protects the sensor during transport and storage. What applications are most suitable for this instrument? The compact precision device is designed for jewellery and gemstone weighing, small laboratory analyses and hobbyist uses such as reloading where fine measurement resolution is essential. KERN · Origin: China · Sold by Metav Werkzeuge — info@metav-werkzeuge.com · +49 2822 7131930
500g Precision Caliper Table Scale 0.1g Readability Stainless Steel Compact, Battery/AC, HACCP Support - KERN
Compact stainless-steel design, precise 0.1 g readability and battery operation combine to deliver accurate portioning and fast, mobile use in hygienic environments. Order the KERN FOB 500-1S directly via Metav Werkzeuge or consult our specialists for application advice. KERN FOB 500-1S — stainless-steel tabletop scale, 500 g / 0.1 g The KERN FOB 500-1S is a super-compact stainless-steel tabletop scale designed for precision weighing in kitchens, food labs, retail and other hygienic production areas. Stainless-steel housing and weighing plate Readability 0.1 g accuracy Super-compact, flat design for small spaces Battery operation for mobile use HACCP‑compatible for hygienic workflows Precise portioning with measurable benefits The compact weighing instrument offers a 500 g capacity combined with 0.1 g readability, enabling reliable portion control and fine dosing where consistency matters. The strain‑gauge weighing system provides stable values with a reproducibility of 0.1 g and linearity of ±0.2 g, which supports repeatable processes and reduces waste. Such measurable precision benefits quality control, inventory accuracy and cost-efficiency in production environments. Robust hygiene performance for regulated areas Constructed with a stainless-steel housing and weighing plate, the unit resists corrosion and supports easy cleaning thanks to smooth surfaces. The flat, low‑profile design limits crevices where residues could accumulate, aiding compliance with hygiene regimes such as HACCP. Non-slip rubber feet ensure secure placement on worktops, while the included protective cover helps to protect the load cell and display during cleaning and transport. Mobility and user-focused operation Equipped for both mains and battery operation (9 V block), the instrument offers flexibility for multi-location use across kitchen, retail counter or laboratory settings. The clear LCD with 20 mm digit height ensures readings are legible at a glance, speeding up checks and portions. Low weight and a compact footprint make the scale easy to reposition, supporting lean workflows and on-demand weighing without the need for permanent bench space. For reliable precision and fast supply from Metav Werkzeuge, contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the KERN FOB 500-1S and its fit for the intended application Technical data Article number: FOB-S SKU: FOB.500-1S Manufacturer: KERN GTIN: 4045761135734 Origin: CN Facts Weighing range: 500 g Readability: 0.1 g Reproducibility: 0.1 g Linearity: ±0.2 g Display digit height: 20 mm Weighing plate (rectangular): 125×155 mm Housing dimensions (without removable parts): 175×155×40 mm Weight: 0.68 kg Power supply: 230 V AC, 50 Hz Battery: 9 V block Battery life: 20 h Operating temperature: 10 °C–40 °C Max. ambient humidity: 95 % Weighing system: strain gauge Special features Wägeplatte aus Edelstahl (weighing plate: stainless steel) Stainless-steel housing and smooth surfaces for easy cleaning Flat, super-compact construction for confined spaces Non-slip rubber feet for secure placement Protective cover included Suitable for HACCP-compliant quality systems Portable: mains and battery operation FAQ How accurate is the scale for small portions? The KERN FOB 500-1S achieves a readability of 0.1 g and reproducibility of 0.1 g, making it suitable for fine portioning and dosing tasks. Is the unit suitable for food-industry environments? Yes. The stainless-steel housing and weighing plate, plus a flat design and included protective cover, support cleaning routines and HACCP‑compatible workflows. Can the scale be used without mains power? The instrument operates from a 9 V block battery with an approximate battery life of 20 h, enabling mobile use across different workstations. KERN — Origin: CN
5000 g; 0,5 g Edelstahl-Tischwaage mit Checkweighing-Display, IP67, Wägeplatte 252×200 mm - KERN
KERN Bench scale Technical Data: and additional information:Manufacturer: KERNModel: Bench scaleMaterial: Wägeplatte aus EdelstahlReadout: 0,2 g - 2 g; 5 gOrder now Bench scale Online.
50h Internal Battery Pack For Load Cells Rechargeable NiMH, 12h Charge Time - KERN
Take advantage of the combination of reliable NiMH power, long runtime and compact weight to keep weighing systems running without interruption; order the HCD-A01 directly via Metav Werkzeuge or consult our advisors for compatibility and fast dispatch. HCD-A01 internal battery for load cells (NiMH) — KERN The HCD-A01 internal battery is a compact NiMH power unit intended to supply load cells and weighing electronics during portable or stationary measurement tasks. Internal NiMH power for load cells Up to 50 h runtime without backlight 12 h recharge time Lightweight: 0.16 kg Reliable power for weighing electronics that reduces downtime The unit uses NiMH chemistry to provide up to 50 h of operation without backlight, ensuring extended measurement cycles between charges. With a standard 12 h charging period, the design balances convenient recharge intervals with stable output for sensitive electronics. This arrangement reduces unexpected production stops and supports continuous inspection or weighing tasks, providing an efficient and predictable power supply for metrology equipment. Compact, serviceable design optimised for load‑cell applications Built specifically for load‑cell and weighing applications, the internal battery supplies stable voltage to analogue and digital weighing modules. A load cell converts force into electrical signals; a dependable power source prevents measurement drift and supports repeatable results. The battery’s 0.16 kg mass contributes to a low overall system weight, aiding portability in field checks and mobile test rigs while minimising mechanical load on instrument housings. Practical maintenance and dependable supply from a precision partner Maintenance is straightforward due to the battery’s proven chemistry and clear charge interval; routine charging keeps the unit ready for use without complex service procedures. Metav’s position as a precision partner brings further assurance: decades of technical experience, a stock range exceeding 250,000 products and an Emmerich‑based quality filter offer reliable availability and consistent product standards. This combination supports workshop uptime and simplifies procurement for industrial buyers. For availability, compatibility checks or purchasing advice on the HCD-A01, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930; WhatsApp +49 170 2837271 for quick enquiries Technical data SKU: HCD-A01 GTIN: 4045761218222 Manufacturer: KERN Origin country: CN Tariff number: 85075000 Core specifications Weight: 0.16 kg Charging time: 12 h Battery runtime: up to 50 h without backlight ECLASS: 21059207 Special features Internal battery for load cells NiMH chemistry Accessory category: Scales / Batteries Article group: Batteries / Accumulators FAQ What type of battery chemistry does this unit use? The HCD-A01 uses NiMH cell chemistry, selected for stable output and proven cycle behaviour in weighing applications. How long will the battery run between charges? Under typical conditions the unit provides up to 50 h of operation without backlight before recharging is required. How long does a full recharge take? A full recharge requires approximately 12 h under standard charging conditions. Is the battery suitable for portable scale use? Yes; the HCD-A01 is designed for load‑cell and weighing electronics and is lightweight at 0.16 kg, supporting portable setups. Who supplies and supports this product? Metav Werkzeuge supplies the HCD-A01 and can advise on compatibility with specific scale models and measurement systems. Metav Werkzeuge GmbH, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com · Tel: +49 2822 7131930 · WhatsApp: +49 170 2837271
Accurate weighing that keeps production consistent
Scales are measuring instruments that determine the weight, force or count of an object and are essential across workshops and production lines. From precision scales that resolve fractions of a milligram to crane scales that handle several tonnes, the right weighing equipment ensures process reliability, legal compliance and operational efficiency.
How the right scale supports your workflow
Scales convert mechanical or electronic signals into repeatable weight values; external factors such as local gravity, magnetism, air buoyancy and vibration influence the result and often require site-specific adjustment. For legally binding measurements a statutory verification is required, while routine quality assurance is achieved through documented calibration. Choosing the correct combination of measuring range and readability avoids unnecessary sensitivity and stabilises throughput.
Practical advantages you notice every day
- Fast, reproducible results that reduce rework and speed up throughput.
- Better process control through repeatability and consistent stabilisation times.
- Compliance where required: support for statutory verification and DAkkS-accredited calibration services.
- Lower downtime via robust designs for industrial environments and user-friendly tare functions.
- Versatility across applications with options such as precision scales, analytical balances, platform scales, counting scales and checkweighers.
Premium measurement from a trusted partnership
KERN & SOHN represents a long-established premium choice for precise weighing and metrology, offering an extensive range of instruments and accredited services. Metav acts as your procurement and quality filter from Emmerich: decades of expertise, over 48,000 customers and a catalogue of more than 250,000 products ensure reliable supply and consolidated sourcing for industry, trade and crafts.
Key technical data at a glance
- measuring range: from sub-milligram to multiple tonnes
- readability (d): smallest display step, determines sensitivity
- linearity: specification for deviation across the measuring range
- tare: container weight subtraction, essential for net weight determination
- environmental influences: gravity, magnetism, air buoyancy, vibration, temperature, draught
- common types: precision scales, analytical balances, platform scales, counting scales, checkweighers
- verification vs calibration: statutory verification required for legally relevant weighing; calibration for traceable quality assurance
- application areas: laboratory, production, warehouse, shipping, retail, gastronomy
FAQ
What does readability (d) mean for scales?
Readability is the smallest weight increment a scale displays. For precision scales, a smaller readability gives finer resolution but increases sensitivity to draughts and vibration.
What is the difference between accuracy and repeatability?
Accuracy describes how close a measured value is to the true value; repeatability describes how consistently a scale returns the same result under identical conditions. Both matter, but repeatability is often decisive for stable production processes.
When do I need a verified (statutory) scale?
A verified scale is required whenever weight determines legal transactions, for example sales by weight. For internal quality control, a documented calibration is typically sufficient.
Why does my scale show fluctuating values despite correct operation?
Fluctuations are often caused by environmental factors: air draught, nearby vibration, temperature changes or an unstable support. Site selection and appropriate housing or wind protection reduce this effect.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com