600 kg Precision Floor Scale With 1,000×1,000 mm Steel Platform, IP67, 200/500 g Readability - KERN

Take advantage of the 15 m special length and the secure link between indicator and platform for flexible scale installation; compatibility notes require checking models with optional calibration before purchase. Order the cable directly via Metav Werkzeuge or consult our specialists for application advice. BFB-A03 connection cable for scales by KERN — 15 m special length The BFB-A03 is a 15 m connection cable designed to link a scale indicator and its weighing platform, suitable for industrial and workshop weighing setups where extended separation is required 15 m special length for flexible layouts Designed for indicator-to-platform connection Not retrofit‑compatible on calibrated models Suitable for industrial weighing installations Flexible installation that keeps the workspace organised The extended 15 m run enables placing the weighing indicator at a convenient workstation while the platform remains in the process area, so measurement points and operator stations can be separated without resorting to makeshift extensions. This layout reduces clutter on the bench and minimises the need to reposition heavy platforms, delivering a more efficient workflow. The long reach also simplifies integration into existing production lines where direct proximity is impractical. Clear compatibility guidance to avoid costly errors Compatibility is decisive when selecting this accessory. The cable is intended specifically for connection between evaluation unit and platform and is not retrofit‑compatible on models with optional calibration, which means certain scale configurations require ordering the cable at the time of initial system specification. For installations where calibration options have been selected later, an alternative factory‑approved connection must be used. This transparency prevents downtime and supports a reliable measuring chain. Practical benefits for industrial weighing applications Beyond mere length, the design focuses on dependable signal transmission and straightforward installation in workshop and industrial contexts. The robust construction suits routine handling and fixed installations, helping to maintain consistent measurement performance. Combined with Metav Werkzeuge’s role as a quality filter for the European market, the accessory contributes to a predictable supply chain and dependable product selection for professionals seeking long‑term reliability. Contact Metav Werkzeuge in Emmerich for compatibility checks and to secure the KERN BFB-A03 15 m connection cable — expert advice and prompt dispatch available from our warehouse to your workbench Technical data Article number: BFB-A03 Manufacturer: KERN GTIN: 4045761161788 Country of origin: China Core data Cable length: 15 m Weight: 3.5 kg Tariff code: 84239010 eCl@ss: 21131814 Special features Function: connection between indicator and platform Note: not retrofit-compatible for models with optional calibration Product group: scales accessories Category path: Scales › Accessories FAQ Is this cable suitable for remote mounting of the indicator? The BFB-A03 cable by KERN is intended precisely for remote mounting, enabling the indicator to be positioned up to 15 m from the platform for ergonomic or process-driven installations. Can the cable be fitted afterwards if calibration was added later? No, the cable is not retrofit‑compatible on models that use an optional calibration package; the BFB-A03 must be confirmed as suitable for the specific scale configuration before procurement. Which devices is the BFB-A03 compatible with? Compatibility depends on the scale model and its factory options; the BFB-A03 is a connection cable for indicator-to-platform links on compatible KERN weighing systems. Where does this cable ship from and who supplies it? The KERN BFB-A03 is supplied via Metav Werkzeuge’s stock in Emmerich, with logistics set up for reliable delivery to industrial and workshop customers. Manufacturer: KERN — Origin: China

A compact table base with an integrated wall holder enables flexible table or wall mounting for the weighing indicator and keeps the workspace tidy. Benefit from the lightweight 0.25 kg design and dependable KERN quality; order the accessory directly via Metav Werkzeuge or consult our specialists if required. Table base EOC-A04 – Table base with wall holder for EOC-A04 (KERN) A Table base EOC-A04 designed for secure table or wall mounting of the EOC‑A04 weighing indicator, ideal for compact workshop and production environments. Includes wall holder for EOC-A04 mounting Compact table base with integrated wall bracket Lightweight: 0.25 kg for easy handling Save bench space with flexible mounting The combination of a stable table base and an included wall holder allows the weighing indicator to be positioned where it best supports the workflow, whether temporarily on a bench or permanently on a wall. This flexibility reduces clutter, simplifies access to the display and contributes to faster weighing cycles. The design suits tight workstations and helps maintain a clear, organised production area, improving throughput and operator efficiency. Quick installation for uninterrupted operation Fitted specifically for the weighing indicator, the included bracket enables straightforward mounting and reassignment between table and wall positions. Minimising installation time supports continuous operation and reduces setup-related downtime. The accessory’s compact format and low mass make handling and reinstallation swift, supporting rapid changeovers in busy environments without needing additional fixtures. Built for workshop compatibility and trusted sourcing Delivered by KERN and categorised for scale accessories, the product is meant to integrate seamlessly with common weighing setups. The low weight, 0.25 kg, makes it practical for frequent repositioning while the included wall bracket ensures consistent alignment of the indicator. As a supplier, Metav combines decades of experience with a broad product range, offering a reliable quality filter from Emmerich to European workshops and trade customers. Contact Metav Werkzeuge in Emmerich for ordering or technical clarification — eMail: info@metav-werkzeuge.com • Phone: +49 2822 7131930 • WhatsApp: +49 170 2837271 Technical data Article number: EOC-A04 SKU: EOC-A04 GTIN: 4045761192485 Manufacturer: KERN Origin: CN Tariff number: 84239010 Facts Weight: 0.25 kg eClass: 21160592 Special features Includes wall holder for mounting the EOC-A04 indicator Product category: Scales — Accessories Product group: Mounting bracket FAQ Is the bracket compatible with the EOC-A04 indicator? The included wall holder is designed specifically for the EOC‑A04 indicator and supports both table and wall installation. How much does the accessory weigh? The table base with wall holder has a weight of 0.25 kg. Who manufactures this accessory? The accessory is produced by KERN and supplied under the designation EOC‑A04. Can the base be moved between workstations easily? Yes, the compact and lightweight design allows simple repositioning between benches or walls as needed. KERN — Origin: China — Contact: not provided

Take advantage of a robust, powder-coated steel ramp that simplifies loading onto workshop scales and reduces handling time; its substantial mass and durable finish support stable weighing operations, so order the component directly via Metav Werkzeuge or contact our consultants for tailored advice. KERN BIC-A01 Loading Ramp — powder-coated steel, workshop-grade run-on solution The KERN BIC-A01 Loading Ramp is a sturdy run-on ramp designed to facilitate safe and reliable access to industrial weighing platforms in production and workshop environments Powder-coated steel construction Fits weighing platforms 1000×1000×108 mm Robust 45 kg base weight for stability Designed for KERN scale platforms Built for consistent, measurable performance Constructed from powder-coated steel, this run-on ramp prioritises durability and low maintenance in demanding environments. The solid finish provides corrosion resistance, reducing the need for frequent touch-ups and extending service life compared with untreated alternatives. By offering a rigid approach surface and a comparatively high mass, the ramp improves stability during transfer and weighing processes, which supports repeatable measurement results and minimises rework. Integrates with weighing workflows to save time Engineered as an accessory for industrial scales, the ramp permits smoother transitions of trolleys or pallets onto the weighing surface, cutting loading time and lowering the risk of misalignment. Compatibility with KERN platform systems ensures straightforward placement and consistent positioning, which helps to reduce operator corrections and maintain throughput. The practical result is a more efficient weighing routine and fewer interruptions to production flow. Practical design for everyday workshop use The functional design focuses on reliability rather than complexity: a robust metal construction delivers predictable behaviour under routine use, while the surface treatment keeps cleaning and upkeep simple. The ramp’s weight contributes to a secure, non-shifting base during operations, helping to protect both the scale and handled goods. For workshops seeking to standardise equipment, this accessory supports safer handling and clearer procedural outcomes without the need for specialised training. For precise compatibility checks or to arrange a supply of the KERN BIC-A01, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930; specialist advice and prompt order handling are available from our team. Technical Data Article number: BIC-A01 Manufacturer: KERN GTIN: 4045761193239 Country of origin: CN Material: Powder-coated steel Weight: 45 kg Customs tariff number: 73269098 Facts ECLASS: 22108608 SKU: BIC-A01 Weight (kg): 45 GTIN: 4045761193239 Origin: China Special features Suitable for models with weighing platform size 1000x1000x108mm Non-standard production note: nicht serienmäßig Powder-coated finish Accessory for scales / ramp for weighing platforms FAQ Is the ramp compatible with KERN weighing platforms? The ramp is designed for use with KERN scale platforms and aligns with models specified for the corresponding platform size, simplifying integration into existing weighing setups. What material is the ramp made from and how durable is it? Constructed from powder-coated steel, the ramp offers robust corrosion resistance and durability suitable for regular workshop use with KERN accessories. How heavy is the ramp and why does that matter? At 45 kg, the ramp provides a stable base that reduces movement during loading, which helps to maintain repeatable weighing results when used with a compatible platform. Can the ramp be used in wet or humid environments? The powder-coated surface enhances protection against moisture and general workshop contaminants, making it more resilient than untreated metal in typical industrial conditions. Is the ramp supplied ready to use, or does it require assembly? The ramp is supplied as a ready-made accessory for weighing platforms; specific installation or placement instructions should be followed to ensure correct alignment with the scale. Manufacturer: KERN — Address: not provided — Contact: not provided

Take advantage of a combination of powder‑coated steel construction and a design made specifically for flush installation to secure long‑term reliability and simple, barrier‑free access to floor scales; order the frame directly via Metav Werkzeuge or ask our consultants for tailored assistance. Pit frame BIC-A04 by KERN — powder‑coated steel support for floor scales The Pit frame BIC-A04 is a recessed support frame intended for the installation of weighbridges, enabling barrier‑free access and flush mounting of floor scales. Powder‑coated steel construction Designed for 1 m square weighplates Robust support for flush‑mounted scales Quick installation for barrier‑free access Built for durable, flush installation The frame is made from powder‑coated steel, which provides corrosion resistance and a durable surface finish suitable for workshop environments. Its geometry is optimised to accept a standard square weighplate, allowing the scale to sit flush with the floor for barrier‑free access. The solid construction reduces movement and deformation during loading, translating technical stability into consistent weighing results and fewer installation adjustments over time. Practical benefits for workshop and industrial use By offering a recessed mounting solution, this support frame simplifies access to floor scales and helps prevent trip hazards or ramps in the working area. The robust support provided by the frame contributes to precise weighing by keeping the weighplate aligned and stable, reducing the risk of tare shifts. For production areas and goods receiving bays, the resulting ease of loading and unloading accelerates throughput and reduces manual handling effort, delivering a measurable improvement in daily operational efficiency. Designed for straightforward installation and serviceability The construction allows for straightforward placement and fixing of the weighbridge without complex civil works. Once installed, the frame permits regular inspection around the weighplate and access for maintenance without dismantling surrounding floor sections. Clear compatibility with standard weighplate dimensions means planning and replacement are simpler, while the cleaner installation facilitates routine cleaning and prevents debris accumulation that can affect measurement accuracy. For assistance selecting the right recessed frame or to arrange supply of the KERN pit frame, contact Metav Werkzeuge in Emmerich for expert advice and direct ordering support. Technical data Article number: BIC-A04 SKU: BIC-A04 Manufacturer: KERN GTIN: 4045761193260 Origin: CN Customs tariff no.: 84239010 ECLASS: 35011090 Dimensions & weight Compatible weighplate size: 1000×1000×108 mm Weight: 30 kg Materials & features Material: Steel, powder‑coated Application: Recessed installation for floor scales Product group: Pit frames / scale accessories Category: Accessories for scales FAQ Is the frame suitable for flush mounting of floor scales? The KERN pit frame BIC-A04 is designed for recessed installation and supports flush mounting of a standard square weighplate. What material and finish does the frame have? The frame is manufactured from steel with a powder‑coated finish to improve durability and resistance to workshop conditions. Which weighplate dimensions are compatible with the frame? Compatibility is specified as weighplates sized 1000×1000×108 mm for the BIC-A04 model. Can the frame be used outdoors? The powder‑coated steel provides protection against corrosion, but outdoor use should consider site‑specific exposure and any required additional surface protection. How heavy is the support frame for handling and installation? The support frame weighs 30 kg, which informs handling and installation planning for the BIC-A04. KERN — Origin: China — Distributor contact: Metav Werkzeuge, Emmerich | Email: info@metav-werkzeuge.com | Tel: +49 2822 7131930

Take advantage of reliable floor anchoring and compact design to improve weighing stability; the pair of foot plates provides secure fixation for a weighing bridge while keeping installation quick and unobtrusive. Order through Metav Werkzeuge or consult our advisors for application advice and fast supply. BIC-A07 Foot Plate Pair – Floor fixing for weighing bridge by KERN The BIC-A07 is a pair of foot plates designed to secure a weighing bridge to the floor, intended for use in industrial metrology and workshop scale installations. Secure floor anchoring for weighing bridge Durable pair for industrial scale installations Rapid, straightforward installation on-site Compact design with low weight 0.75 kg Stabilise measurements with dedicated floor anchoring A weighing bridge needs a steady foundation to deliver consistent results; the BIC-A07 foot plates provide exactly that. By securing the load cell structure to the floor, these mounting plates reduce lateral movement and vibration that can cause measurement drift. The direct consequence is improved repeatability of readings and fewer recalibrations, which translates into measurable time savings during routine quality checks. The design focuses on reliable fixation rather than decorative elements, so the practical benefit is clear: better measurement stability for industrial scales and test benches. Save assembly time with a compact, practical mounting solution Installation routines are often a bottleneck in workshop set-ups. The foot plates have been conceived for quick integration with existing weighbridge frames, enabling technicians to achieve firm anchorage without extended on-site modification. The compact footprint and low mass (0.75 kg) make handling and positioning straightforward during installation phases. For operations that require short downtimes and predictable set-up times, this results in lower labour overheads and fewer interruptions to production workflows. The simple mechanical function—anchoring the weighing bridge to the floor—means less specialist tooling is required and commissioning is faster. Choose KERN components through a dependable partner Selecting accessories from a recognised manufacturer brings compatibility and traceability. These foot plates are supplied under the KERN brand and are categorised within scale accessories, which simplifies inventory and spare-part management for calibration labs and maintenance teams. Procuring the plates via Metav Werkzeuge connects that brand reliability with a broad supply chain: Metav’s Emmerich hub acts as a quality filter for the European market, supporting consistent availability and transparent fulfilment. For procurement managers seeking to consolidate suppliers while maintaining metrology-grade performance, this combination supports a robust supply strategy. Request a suitability check or a tailored quote for the KERN BIC-A07 from Metav Werkzeuge – contact: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 — our consultants will advise on compatibility and delivery Technical data Article number: BIC-A07 Manufacturer: KERN SKU: BIC-A07 GTIN: 4045761193291 Country of origin: CN Tariff number: 84239010 Facts Weight: 0.75 kg ECLASS: 21130190 Special features Pair of foot plates for floor fixation of a weighing bridge Category: scale accessories (Waagen Zubehör) Intended use: secure anchoring of weighing bridge assemblies FAQ What is the primary purpose of these foot plates? The foot plates are intended to fix a weighing bridge to the floor, providing stable floor anchoring and improved measurement repeatability for scale installations. Are these plates compatible with different weighing bridges? Compatibility depends on the bridge frame design; the BIC-A07 is a standard accessory for scale assemblies and is typically suitable where floor fixation points match the plate mounting geometry. How much do the plates weigh? The pair has a combined weight reference of 0.75 kg, which supports easy handling during installation. Who manufactures the foot plates and where are they produced? These foot plates are manufactured by KERN and are listed with origin country CN and GTIN 4045761193291. Can these plates improve weighing accuracy? By reducing movement and vibration of the weighing bridge, the plates contribute to greater stability and can lower the frequency of recalibration, improving operational reliability. Manufacturer: KERN · Country of origin: CN · GTIN: 4045761193291

Take advantage of a stable, lightweight floor stand that elevates the indicator to an ergonomic 1000 mm working height while remaining retrofittable for existing systems; order the KERN EOB-A02B directly via Metav Werkzeuge or consult our advisers for application-specific guidance. KERN EOB-A02B floor stand — 1000 mm height, retrofittable The KERN EOB-A02B is a floor stand designed to raise the weighing indicator to an ergonomic working height, ideal as an accessory for laboratory and workshop scales. Raises indicator to approx. 1000 mm height Retrofit-ready for existing indicator units Lightweight for quick installation — 2.65 kg Designed as accessory for weighing systems Raise indicator visibility and reduce handling errors A dedicated floor stand that positions the indicator at 1000 mm delivers tangible workflow benefits: improved line of sight, fewer posture-related interruptions and quicker data entry. Fitting the indicator at an elevated level reduces the need to bend or lift displays during repetitive weighing tasks, which supports faster cycles and fewer accidental knocks. The stand is presented as a practical ergonomic improvement for production benches and quality-control stations. Fast integration with existing weighing equipment Designed to be retrofittable, the stand enables the retro‑installation of an indicator without replacing the base scale, cutting downtime and spare-part complexity. With a lightweight assembly of 2.65 kg, handling and mounting are straightforward, which shortens installation times and keeps disruption to a minimum. This practical compatibility helps preserve existing investments in weighing electronics while upgrading usability at the bench. Practical design for workshop and industrial use As an accessory from KERN, the unit focuses on a compact footprint and reliable positioning for everyday operation in busy environments. The simple upright configuration secures the indicator at working height, improving ergonomics and operational clarity for operators. The accessory nature of the product makes it suitable wherever indicator visibility and repeatable measurement workflows are priorities, from workshops to inspection areas. Contact Metav Werkzeuge in Emmerich for advice on integrating the KERN EOB-A02B into your weighing setup — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance Technical data Article number / SKU: EOB-A02B Manufacturer: KERN GTIN: 4045761192171 Origin country: CN Core specifications Height: approx. 1000 mm Weight: 2.65 kg Tariff number: 73269098 ECLASS: 21170601 Special features Retrofit-capable (nachrüstbar) Accessory for weighing indicator units Product category: Accessories for scales Product group: Stands / tripods FAQ Is the stand compatible with different indicator models? The KERN EOB-A02B is designed as an accessory for weighing systems and can be retrofitted to many indicator units; compatibility depends on the indicator's mounting interface and bracket dimensions. What is the total height of the stand? The floor stand offers an overall working height of approximately 1000 mm to position the indicator at an ergonomic level. How heavy is the KERN EOB-A02B and is it easy to install? The stand weighs 2.65 kg and is intentionally lightweight to enable quick mounting and repositioning with minimal effort. Can the stand be retrofitted to existing equipment? Yes — the EOB-A02B is retrofittable (nachrüstbar) so it can be added to existing setups without replacing the base scale. Where is the product manufactured? The KERN EOB-A02B is listed with origin country CN. KERN — distributed via Metav Werkzeuge, Emmerich am Rhein · Contact: info@metav-werkzeuge.com · Phone: +49 2822 7131930

Benefit from a combination of universal 100–240 V mains input, a regulated 9 V DC / 100 mA output and included multi‑region plug adapters for consistent power to scales and small instruments; Order the Universal external power adapter (YKA-16) directly via Metav Werkzeuge or ask our consultants if needed. YKA-16 — Universal external power adapter (9 V, 100 mA) by KERN The YKA-16 is an external universal power adapter for scales and related accessories, designed for reliable operation across international mains. Universal 100–240 V mains input Stable 9 V DC output at 100 mA Incl. EU, GB and US plug adapters Compact design, approx. 0.13 kg weight Continuous, regulated power for precise measurement The adapter supplies a regulated 9 V DC output at 100 mA, ensuring connected instruments receive a constant voltage even if the mains fluctuate. A regulated supply reduces drift and measurement error in sensitive weighing equipment, which translates into fewer recalibrations and more consistent results. The combination of a wide input range and regulated output supports uninterrupted operation of small scales and peripherals commonly used in workshops and laboratories. Ready for international use and flexible deployment Equipped with EU, GB and US plug adapters, the unit is prepared for deployment in multi‑location environments without additional accessories. The 100–240 V mains input accommodates different supply standards, which simplifies logistics for companies that move instruments between sites or serve international customers. This compatibility shortens setup time and reduces the need for separate adapters for each region. Space‑saving, serviceable design for workshop routines With a compact form factor and a listed weight of 0.13 kg, the adapter occupies minimal space in toolboxes and on service trolleys. The external design enables easy replacement should a spare be required, supporting fast maintenance cycles and reducing downtime. Supplied as a standalone adapter for scales and accessories, it integrates well into existing equipment fleets without altering instrument housings or installation points. For dependable international power solutions for KERN scales and accessories, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to confirm compatibility and place an order through our secure procurement channel. Technical data SKU: YKA-16 Manufacturer: KERN Country of origin: CN Tariff code: 85044090 Core specifications Input voltage range: 100–240 V Output voltage: 9 V DC Output current: 100 mA Weight: 0.13 kg eCl@ss: 21059206 Features and compatibility Product category: Scales > Accessories Product type: External universal power adapter Included plug adapters: EU, GB, USA Suitable for: Small weighing instruments and accessories FAQ Which mains voltages does the adapter support? The YKA-16 supports an input range of 100–240 V, allowing operation on most international mains supplies without a voltage converter. Are plug adapters included and which regions are covered? Yes, the unit is supplied with plug adapters for EU, GB and USA, enabling direct connection in those regions. Is the YKA-16 suitable for professional scales? The adapter is intended as an external power supply for scales and related accessories; its regulated 9 V DC / 100 mA output is suitable for many small weighing instruments and peripherals. What is the weight and portability of the adapter? The adapter weighs approximately 0.13 kg, offering a compact and lightweight option for mobile service kits and crowded workbenches. Manufacturer: KERN — Country of origin: CN