Precision boring bars with internal coolant for deep hole accuracy
Boring bars with internal coolant are precision tools designed to enlarge and finish existing holes, delivering tight dimensional and form tolerances while preventing tool breakage and surface damage; they are essential for deep bores and blind holes where external cooling cannot reach the cutting edge. These systems force high-pressure coolant through axial channels directly to the cutter, which reduces thermal stress and efficiently evacuates chips, making them ideal for machining difficult-to-cut or long-chipping materials. As a compact tool solution they combine rigidity, chip control and cooling to improve cycle times and extend tool life, with the main advantages being enhanced hole quality, repeatability and reduced rework for production and maintenance machining operations.
6mm SIR S12H Indexable Insert Drill Bar Right-Hand 12mm Cutting Height, 100mm Length - Teknik Makina
Take advantage of the combination of compact design, 12 mm shank stability, and compatibility with IR06 indexable inserts for reliable steel machining; order the SIR S12H drill bar (SKU K337-1TM) directly via Metav Werkzeuge or ask our consultants if needed SIR S12H drill bar (K337-1TM) – SIR for IR indexable inserts, 12 mm shank, right-hand cutting | Teknik Makina The SIR S12H drill bar is a purpose-built tool holder designed to accept IR indexable inserts for compact turning and internal machining tasks Compatible with IR06 indexable inserts 12 mm shank for stable toolholding Right-hand cutting suited to conventional setups 100 mm overall length for compact machines Stable toolholding for consistent surface quality The SIR S12H is designed around a 12 mm shank and a precise cutting height of 12 mm, which together provide a stiff interface between machine spindle and cutting edge. This stability reduces chatter and contributes to a more consistent surface finish and longer insert life. The term indexable inserts refers to the replaceable carbide plates mounted in the head; using a correctly matched insert size, in this case IR06, enables repeatable geometry and straightforward re-indexing when one cutting edge becomes dull. Quick changeovers and workshop efficiency Changing inserts is kept simple by the Torx fastening system: a Torx T6 key secures the cutter with an M2x4.2 screw, allowing controlled torque and reliable clamping without specialist tools. With an overall length of 100 mm and a weight of just 0.089 kg, the assembly is easy to handle during setup and reduces operator fatigue during frequent tool changes. The compact form factor supports efficient tool management on benches and in turret stations, helping to decrease machine downtime and maintain steady production rates. Applications, compatibility and planning made easy Marked as SIR S12H to ISO-like dimensions, this drill bar follows established conventions for shank and head geometry, simplifying spare-part selection and inventory management. It is intended for precision-driven steelworking operations where indexable inserts are preferred for cost-effective regrinding and quick replacement. The right-hand cutting direction suits common lathe and turning centre configurations. For customers seeking centralised procurement and dependable supply, Metav’s quality filter in Emmerich ensures product availability and consistent standards across batches. Contact Metav Werkzeuge for specification matching and local delivery; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the SIR S12H drill bar (K337-1TM) and suitable IR06 insert options Technical Data Article number: K337-1TM Manufacturer: Teknik Makina Title (EN): SIR for IR Indexable Inserts ISO designation: SIR S12H Numbers / Core technical data Shank diameter: 12 mm Overall length: 100 mm Cutting height: 12 mm Diameter: 6 mm Weight: 0.089 kg Compatible inserts: 6 IR Torx screw: M2x4,2 Torx key: T6 Cut direction: Right ECLASS: 21180806 Special features Holder designation: IR06 Application: for IR indexable inserts Design: compact drill bar for indexable insert mounting Intended use: precision steel machining tasks FAQ Which indexable inserts fit this drill bar? The SIR S12H drill bar (SKU K337-1TM) accepts IR06 indexable inserts; the tool is configured for six IR positions and matched insert geometry. Are the inserts included with the delivery? Inserts are not automatically supplied; the SIR S12H tool holder is specified to carry IR06 indexable inserts and can be paired with suitable carbide grades for the intended application. How is the insert secured in the holder? An M2x4.2 Torx screw secures the insert; use a T6 Torx key to achieve the correct clamp torque and repeatable seating. Is this drill bar suitable for standard turning machines? Yes. The SIR S12H follows standard SIR shank conventions and right-hand cutting orientation, making it compatible with conventional lathes and turning centres that accept a 12 mm shank Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
6mm Thread Milling Bar For Internal Threads Coolant Through, Right-Hand, Solid Carbide 4.3mm Cut Height - Teknik Makina
Inconsistent product data detected: compatible insert size is unclear (6 IR vs 16 IR). Please verify the source data to ensure accuracy and prevent potential issues arising from discrepancies, as unclear or conflicting information could lead to errors in application, production, or usage, which might impact overall performance or reliability. It is essential to cross-check all relevant details and confirm the correct specifications to avoid misunderstandings or misinterpretations that could compromise the intended functionality or compatibility of the product in question. Taking the time to verify the source data thoroughly will help maintain quality and ensure that all requirements are met effectively.
7.8mm Thread Milling Rod for Internal Threads Right-Hand, Coolant Through, 5.3mm Cut Height, 8mm Shank - Teknik Makina
Take advantage of a compact tool that combines solid-carbide construction with internal coolant and an insert-based design for consistent internal threading; order directly via Metav Werkzeuge or ask our consultants if needed. Gewindebohrstange KE71TM – thread boring bar for inside threads, solid carbide with internal coolant (Teknik Makina) Gewindebohrstange KE71TM engineered for internal thread production in CNC and turning applications, offering a compact 125 mm overall length and compatibility with 8 IR indexable inserts Solid carbide construction for long tool life Internal coolant for reliable chip evacuation Compatible with 8 IR indexable inserts Compact Ø7.8 mm shank with 125 mm length Consistent internal threads for higher throughput The KE71TM is designed as a compact thread boring bar that delivers reproducible inside threads while keeping machine time low. The solid-carbide body provides dimensional stability under load and reduces vibration, which supports tighter tolerances on threaded bores. With a nominal diameter of Ø7.8 mm and an overall length of 125 mm, the tool is suitable for confined bores where rigidity and precision matter. This combination of material and geometry translates into fewer rejects and more predictable cycle times, an advantage in batch production. Coolant-through design that protects tool life and process stability An integrated internal coolant channel ensures coolant reaches the cutting zone directly, improving lubrication and chip control. Better coolant delivery reduces heat build-up at the cutting edge and helps avoid built-up edge formation on inserts, extending the life of the indexable cutting tips. The coolant-through feature also supports consistent surface finish in blind or deep internal threads; as a result, rework is minimised and machine utilisation increases. The right-hand cutting orientation complements common spindle set-ups for straightforward integration. Quick set-up and insert compatibility for efficient tool changes The bar is prepared for 8 IR indexable inserts and is identified by the ISO designation E08K, making replacement and tooling standardisation straightforward. The mounting interface accepts an 8 mm shank (D = 8 mm) and the clamping system uses a Torx T6 fastener with screw size M2x4.6, enabling secure, repeatable clamping with minimal adjustment time. A modest mass of 0.045 kg means reduced centrifugal load in high-speed spindle applications, and the 5.3 mm cutting height supports robust engagement while maintaining chip control. Practical supply and quality assurance from a trusted partner Delivered under the Teknik Makina designation, this tool benefits from Metav’s quality filter for the European market: consolidation of supply, traceable stock and prompt order processing from Emmerich. The compact design paired with insert tooling supports lower inventory cost compared with multiple dedicated solid taps, while ensuring access to spare inserts and consumables. Metav’s established distribution and technical advice simplify selection for production environments seeking consistent, measurable results. For precise internal threading solutions request Teknik Makina's KE71TM via Metav Werkzeuge in Emmerich—Metav’s technicians can advise on insert grades and machine parameters; contact +49 2822 7131930 or info@metav-werkzeuge.com for tailored support Technical Data SKU: KE71TM Product name: Gewindebohrstange Application: for inside thread Manufacturer: Teknik Makina Facts Diameter: 7.8 mm Overall length: 125 mm Shank / clamping diameter: 8 mm Weight: 0.045 kg Cutting height: 5.3 mm Cutting direction: right Special features Material: solid carbide Internal coolant: yes Insert type: 8 IR compatible ISO designation: E08K Torx key: T6 Torx screw: M2x4.6 FAQ What types of threads can be produced with this tool? The KE71TM thread boring bar from Teknik Makina is intended for producing internal threads in through and blind bores where indexable insert threading is applicable. Is the tool suitable for high-speed machining? The solid-carbide construction and compact mass (0.045 kg) make the bar appropriate for higher spindle speeds, provided machine rigidity and recommended insert grades are observed. Which inserts are required for mounting? The bar is compatible with 8 IR indexable inserts and follows the E08K ISO designation for straightforward procurement and interchangeability. Does the tool provide coolant supply to the cutting edge? Yes; the KE71TM features an internal coolant channel to ensure directed coolant delivery to the cutting zone. Can this bar be used in small-diameter bores? With a nominal diameter of Ø7.8 mm and an 8 mm shank, the tool is designed for compact internal threading tasks where space is limited. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
73mm S60X DDUNR Boring Bar For DN-- 1506 Inserts 65mm Cutting Height, 600mm Overall Length - Teknik Makina
Benefit from the combination of a sturdy 60 mm shank, 600 mm overall length and compatibility with DN-- 1506 indexable inserts to achieve stable, high-productivity turning. Order the S60X DDUNR directly via Metav Werkzeuge or consult our specialists for application advice. S60X DDUNR Bohrstange – Boring bar for DN-- 1506 indexable inserts, 60 mm shank, 600 mm length (Teknik Cutting Tools) The S60X DDUNR is a robust boring bar developed for external turning with DN-- 1506 indexable inserts, offering right-hand cutting for heavy-duty lathe applications. Solid 60 mm shank for stable setup Compatible with DN-- 1506 indexable inserts 600 mm overall length for deep reach Enhanced rigidity for precise heavy turning The solid 60 mm shank and substantial body mass deliver increased stability during heavy cutting, reducing tool deflection and improving repeatability on production runs. A 73 mm diameter at the cutting head and a total mass of 13.66 kg contribute to vibration damping; together these characteristics reduce chatter and help maintain consistent part tolerances. The specified 93° cutting angle supports clearance in interrupted cuts and promotes reliable chip flow during demanding turning cycles. Optimised for indexable-insert productivity Designed to accept DN-- 1506 indexable inserts, the tool holder simplifies insert changes and shortens machine downtime. Indexable inserts allow fast replacement when a cutting edge becomes worn, which reduces per-part tooling costs and keeps cycle times predictable. The ISO designation S60X DDUNR denotes the holder geometry and insert seat, ensuring compatibility with standard insert grades and clamping methods used in industrial turning centres. Reach and robustness for workshop throughput With a 600 mm overall length, the bar provides access to deep bores and extended overhangs while retaining a profile engineered for stiffness. The right-hand cutting orientation and a clamp-holder designation of 15 are suitable for many horizontal and vertical lathe setups used in medium to heavy machining shops. The construction focuses on long service intervals and secure insert clamping to support continuous production schedules and reduce unexpected tool changes. Contact Metav Werkzeuge for a specification review or to discuss how the S60X DDUNR from Teknik Cutting Tools can increase machining stability on the shop floor; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: K417-1TM Manufacturer: Teknik Makina Designation: S60X DDUNR Designation (English): DDUN for DN-- Wendeplatte Cutting direction: right Numbers / Core technical data Shank diameter: 60 mm Overall length: 600 mm Cutting height: 65 mm Diameter: 73 Weight: 13.66 kg Cutting angle: 93° Design / Special features Compatible inserts: DN-- 1506 Right-hand cutting Clamp-holder designation: 15 Intended for indexable inserts (Wendeplatte) FAQ What insert type fits this boring bar? The S60X DDUNR is designed for DN-- 1506 indexable inserts, providing a standardised seat for secure clamping and rapid replacement. Is the tool suitable for deep internal turning tasks? Yes, the 600 mm overall length gives extended reach for deep external turning and overhangs while the solid shank maintains stiffness. Which cutting direction does the bar support? This boring bar is specified for right-hand cutting, enabling conventional orientation on standard lathe spindles. How does the S60X DDUNR help reduce downtime? Use of indexable inserts means worn edges can be replaced quickly without regrinding, so the S60X DDUNR reduces machine stoppages and tooling change time. Is the holder compatible with heavy-duty lathes? The combination of a 60 mm shank, 73 mm head diameter and 13.66 kg mass makes the holder well suited to medium and heavy-duty turning operations where rigidity and damping matter Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7mm S07H SCLCR Boring Bar For CC-- 0401 Indexable Inserts, 95° Cutting Angle, 21mm Insert Height - Teknik Makina
Take advantage of a compact, ISO-based mounting system and precise seating for CC-- 0401 indexable inserts to secure repeatable turning results; order via Metav Werkzeuge or consult the specialists for integration advice. Boring bar S07H SCLCR — SCLC for CC-- indexable inserts, 8 mm shaft (Teknik Makina) The Boring bar S07H SCLCR is a right-hand, SCLC-style toolholder designed for internal and external turning with CC-- 0401 indexable inserts, suited to workshop and production environments. SCLC design for CC-- 0401 inserts 8 mm shank for stable mounting 95° cutting angle for predictable cuts 100 mm overall length, only 0.05 kg Consistent chip control for reliable results The SCLC configuration accepts CC-- 0401 indexable inserts, providing a predictable cutting edge geometry that supports stable chip formation and reduces rework. The combination of a 95° cutting angle and a cutting height of 21 mm ensures the insert is loaded in its intended zone, which improves surface finish and repeatability across batches. For production planners and operators this results in fewer setup iterations and a more consistent process window during turning operations. Simple integration with ISO tooling and light spindle load Marked with the ISO designation S07H SCLCR, this bar is compatible with standard clamping systems and the specified clamp holder size 04, allowing straightforward replacement in existing tool turrets. With an 8 mm shaft and a total length of 100 mm, the tool imposes a low inertia on the spindle – the listed mass of 0.05 kg reduces dynamic load during acceleration and deceleration. The right-hand cutting orientation aligns with common lathe programmes, so retrofitting is carried out with minimal NC programme adjustment and no redesign of fixture geometry. Geometry designed for repeatability and straightforward explanation Key dimensions such as the 7 mm diameter at the cutting tip and a cutting height of 21 mm define the seating and overhang that determine stiffness and vibration behaviour. The term “cutting height” refers to the vertical position of the insert cutting edge relative to the bar axis; correct matching prevents tool chatter and promotes even wear. The SCLC form secures the insert positively, which simplifies changeover and maintains a constant cutting relationship for improved tolerances on turned components. Procurement confidence through tested supply and service consistency Sourcing from established channels reduces project risk: Metav’s offering ensures access to a broad inventory and logistical support for production ramp-ups. The product’s ISO-based designation, lightweight design and compatibility with common insert formats make it a practical option for procurement teams seeking predictable lead times and fewer supplier touchpoints. Metav’s presence in Emmerich acts as a regional quality filter, supporting sustained availability for maintenance and series production. Choose the S07H SCLCR boring bar for dependable indexable-insert performance and contact Metav Werkzeuge in Emmerich for tailored purchasing advice and prompt supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: K099TM ISO designation: S07H SCLCR Type: SCLC for CC-- indexable inserts Manufacturer: Teknik Makina Core dimensions Shaft diameter: 8 mm Tip diameter: 7 mm Cutting height: 21 mm Overall length: 100 mm Weight: 0.05 kg Cutting angle: 95° Cutting direction: right Clamp holder designation: 04 Compatibility & features Compatible inserts: CC-- 0401 Right-hand cutting orientation Low mass for reduced spindle load Files available (product images/illustrations) FAQ Which insert size fits this tool? The S07H SCLCR boring bar accepts CC-- 0401 indexable inserts; this is the specified insert format for correct seating and performance. What does the ISO designation S07H SCLCR indicate? The ISO code describes the toolholder geometry and clamping style; S07H SCLCR identifies the SCLC clamping form compatible with standard toolholders and insert formats. Is the bar suitable for right-hand cutting only? Yes, the design is for right-hand cutting, which matches standard lathe tool orientations and NC programmes. How does the shaft diameter affect performance? An 8 mm shaft provides a compact footprint with reduced overhang, improving rigidity and lowering the risk of vibration in short-reach turning tasks. What are the physical dimensions to consider for turret setup? Key setup dimensions are the 100 mm overall length, 7 mm tip diameter and 21 mm cutting height, which determine clearance, tool offset and seating for accurate repeatability. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
8mm Boring Bar for CCMT 0602 Indexable Inserts L100mm Internal Coolant, 95° Cutting Angle - Teknik Makina
Take advantage of precise insert compatibility and reliable coolant delivery to maintain steady production and reduce insert wear—ideal for workshops that require compact tools with accessible maintenance. Order directly via Metav Werkzeuge or request advice from our consultants for specification matching. Boring bar KA500TM — 8 mm shaft, internal coolant (Teknik Makina) The Boring bar KA500TM is a compact tool for precision internal boring with CCMT 0602 indexable inserts, designed for right-hand cutting in confined machining environments. Compatible with CCMT 0602 indexable inserts 8 mm shaft diameter with 100 mm overall length Internal coolant supply for improved chip evacuation Right-hand cutting with 95° cut angle Maximised stability for consistent insert performance The KA500TM delivers steady cutting behaviour through its purpose-built geometry and secure clamping. Compatible with CCMT 0602 indexable inserts, the toolholder offers a 4.3 mm clamp head width and a 25 mm cutting height, which together ensure reliable insert seating and reduced vibration. This combination translates into more consistent bore diameters and extended insert life, supporting efficient batch production and fewer rework cycles. Targeted coolant flow to improve surface finish Equipped with internal coolant, the bar channels lubricant directly to the cutting edge for effective chip evacuation and heat control. Direct coolant feed reduces built-up edge formation and improves surface quality in through-bore and blind-bore operations. For materials sensitive to heat or where chip evacuation is critical, the integrated coolant route helps maintain tool performance and contributes to predictable machining outcomes. Compact dimensions for tight-bore access and accurate positioning With an 8 mm shaft and 100 mm overall length, the tool is intended for operations where access and rigidity must be balanced. The low mass (approx. 0.045 kg) minimises runout and dynamic deflection in small-diameter bores, while the 95° cut angle and right-hand cutting orientation deliver controlled approach behaviour. These attributes make the bar suitable for precision maintenance, finishing passes or where minimal overhang is required. Quick insert changes and low-maintenance operation Maintenance is straightforward thanks to standardised fastenings: the insert is secured with a Torx T8 key and an M2.5x5.5 Torx screw, enabling rapid replacement and short machine downtime. The compact design and common fastening standard also simplify tool inventory management and operator training, helping workshops maintain throughput with minimal additional tooling. Contact Metav Werkzeuge to confirm suitability of the Teknik Makina KA500TM for specific materials or to arrange supply from our Emmerich warehouse — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: KA500TM ISO designation: A06-08H SKU: KA500TM Facts Shaft diameter: 8 mm Overall length: 100 mm Cutting height: 25 mm Weight: 0.045 kg Cut angle: 95° Cutting direction: right Special features Internal coolant Compatible with CCMT 0602 indexable inserts Clamp head width: 4.3 mm Torx key: T8 Torx screw: M2.5x5.5 Product type: Boring bar eClass: 21180806 FAQ What inserts fit this boring bar? The boring bar KA500TM is designed for CCMT 0602 indexable inserts, ensuring standardised seating and consistent cutting geometry. Can the tool be used for blind bores as well as through bores? Yes, the integrated internal coolant and compact geometry make the bar suitable for both through-bore and many blind-bore applications, improving chip control in confined spaces. What is the recommended tightening method for the insert? Use a Torx T8 driver to secure the insert screw (M2.5x5.5); this is the specified fastening method for the KA500TM to ensure reliable clamping. Is this tool suitable for high-speed machining? The component is compact and rigid, which helps at elevated speeds in small-diameter bores; however, final speed recommendations depend on material and insert grade rather than the holder alone. Which cutting direction does the holder support? The bar is specified for right-hand cutting with a 95° cut angle, providing predictable approach behaviour in typical lathe and turning set-ups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
8mm Boring Bar for CCMT 0602 Indexable Inserts L100mm, Right-Hand 95° Cutting Angle - Teknik Makina
Take advantage of the compatibility with CCMT 0602 inserts, the compact 8 mm shank, and the precise 95° cutting geometry to maintain steady tool performance in tight bores; order the component directly via Metav Werkzeuge or request specialist advice from their consultants. Boring bar S06-08H – 8 mm shank, L100 mm, for CCMT 0602 Indexable Inserts (Teknik Makina) Boring bar S06-08H for precision internal turning and finishing operations with CCMT 0602 indexable inserts, optimised for compact setups and right-hand cutting applications S06-08H boring bar for CCMT 0602 inserts 8 mm shank for compact toolholders 100 mm overall length for tight bores Right-hand cutting with secure Torx fastening Reliable insert compatibility for cost-efficient turning The tool is engineered for use with CCMT 0602 indexable inserts, providing a cost-effective approach to external and internal turning by enabling rapid insert changes and consistent edge positioning. The design reduces machine downtime through standardised insert geometry and repeatable seating, which translates into predictable cycle times and lower consumable costs. For operations where reproducibility is essential, the quick insert change capability supports uninterrupted production and straightforward regrinding strategies. Compact dimensions that improve access and stability With an 8 mm shank and 100 mm overall length, the bar is tailored for constrained bores and compact tool stacks while preserving sufficient overhang control. The 95° cutting angle is set to balance cutting forces and chip flow, helping to reduce chatter in restrained setups and to improve surface finish. The modest mass (approx. 0.045 kg) contributes to better dynamic behaviour in high-speed or small-tool applications, and the measured cutting height 25 mm together with a 4.3 mm clamp head width ensure reliable seat geometry for the insert — important for maintaining concentricity and repeatable cutting performance. Secure fastening and pragmatic maintenance features Fastening is implemented via a Torx T8 drive and an M2.5×5.5 screw, providing reliable clamp torque and simple access for routine servicing; the standardised torque interface supports consistent tightening without special tooling. The bar’s specification focuses on pragmatic workshop practice: robust clamp retention, straightforward screw access and compatibility with commonly stocked CCMT grades. These attributes reduce setup time and simplify tool management in production environments, ensuring the component integrates smoothly into established tooling systems. For specification confirmation, supply queries or tailored cutting recommendations for the S06-08H boring bar, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a supply and technical consultation. Technical data Article number (SKU): K293TM ISO designation: S06-08H Label: 8mm Boring bar CCMT 0602 L100mm Manufacturer: Teknik Makina eClass: 21180806 Key dimensions Diameter / shank: 8 mm Overall length: 100 mm Cutting height: 25 mm Clamp head width: 4.3 mm Weight: 0.045 kg Cutting angle: 95° Cutting direction: right Compatibility & fastening Compatible with CCMT 0602 indexable inserts Torx key: T8 Screw: M2.5×5.5 Category: Boring bars FAQ What insert types fit this boring bar? The S06-08H boring bar is compatible with CCMT 0602 indexable inserts and is designed to accept standard CCMT geometry for straightforward insert replacement. Is the S06-08H suitable for tight internal bores? Yes, the 8 mm shank and 100 mm overall length of the S06-08H make it suitable for compact bores where reduced overhang and improved access are required. Which direction of cut does the tool support? The component is configured for right-hand cutting, as indicated in the specification, matching common machine setups and turning programmes. What fastening hardware is used for the insert clamp? Fastening is by Torx T8 using an M2.5×5.5 screw, providing reliable clamp retention and easy access for maintenance on the S06-08H (SKU K293TM) from Teknik Makina. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
8mm Drilling Bar for CCMT 0602 Indexable Inserts L100mm Internal Coolant, Left 95° Cutting Angle - Teknik Makina
Take advantage of the combination of a compact 8 mm shank, internal coolant and compatibility with CCMT 0602 indexable inserts for consistent bore finishing and reduced cycle times — order via Metav Werkzeuge or consult the technical team for application advice. Boring Bar A06-08H — 8 mm shank, internal coolant, for CCMT 0602 indexable inserts (Teknik Makina) The A06-08H boring bar is a compact internal‑coolant tool for precision internal turning with CCMT 0602 indexable inserts, optimised for restricted bores and stable chip control Internal coolant for reliable chip evacuation 8 mm shank for machines with compact tooling Optimised for CCMT 0602 indexable inserts Left-hand cutting with 95° cutting angle Precise internal turning and efficient chip evacuation The A06-08H is designed for constrained bores where accuracy and coolant delivery matter. The tool’s internal coolant channel directs cutting fluid close to the cutting edge, improving lubrication and chip evacuation, which reduces heat at the cutting zone and prolongs insert life. With an 8 mm shank and 100 mm overall length, the geometry is balanced for rigidity in tight setups while enabling consistent surface finish. The compatibility with CCMT 0602 inserts means cutting forces are carried by proven indexable grades, simplifying maintenance and insert changes. Secure clamping, quick service and predictable set‑up Set‑up time is minimised through the compact clamping interface and standard fasteners. The holder accepts a Torx T8 key and secures the insert with an M2.5×5.5 Torx screw, allowing repeatable torque and secure seating. A 4.3 mm clamping width stabilises the cutting head and reduces vibration in interrupted cuts. The left‑hand cutting orientation and 95° cutting angle are beneficial for specific turning directions and toolpath strategies; the arrangement is practical for many lathes and turning centres where reverse cuts or particular chip flow are required. Workshop reliability and application fit Built for routine production work, this compact tool weighs just 0.045 kg, making it easy to handle during tool changes and inventory management. The boring bar is suitable for users seeking a small‑diameter solution that supports indexable inserts for flexibility in grade and geometry selection. As a dedicated tool for internal turning and finishing, it integrates well into existing tooling kits and is a pragmatic choice where space, coolant feed and indexable insert convenience are primary concerns. Discuss application specifics with Metav Werkzeuge to verify compatibility with machine interfaces and insert grades before integrating the A06-08H into production. Technical data SKU: KA506TM Article number: A06-08H Product type: Boring bar Brand: Teknik Makina Facts Diameter: 8 mm Shank diameter: 8 mm Overall length: 100 mm Weight: 0.045 kg Cutting height: 25 mm Clamping width: 4.3 mm Cutting angle: 95° Cutting direction: left Torx key: T8 Torx screw: M2.5×5.5 Special features Internal coolant For CCMT 0602 indexable inserts Left-hand cutting orientation Category: Boring bars (Bohrstangen) FAQ What inserts are compatible with this boring bar? The boring bar accepts CCMT 0602 indexable inserts; the interface is prepared for common CCMT geometries to enable quick insert changes. Does the tool provide through‑coolant delivery? Yes, the tool is equipped with internal coolant that delivers cutting fluid close to the insert for improved chip control and tool life. Which cutting direction does the bar support? This tool is configured for left‑hand cutting with a 95° cutting angle, suitable for operations requiring reverse cutting orientation. What fasteners and tools are needed for insert changes? Insert retention uses an M2.5×5.5 Torx screw tightened with a T8 Torx key to ensure repeatable clamping. Is the A06-08H suitable for compact machining setups? Yes, the 8 mm shank and 100 mm overall length make the tool especially suitable for compact fixtures and restricted bore access in workshop environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
8mm S06H SCLCR Drilling Bar Right-Hand For CC-- 0602 Indexable Inserts, 95° Cutting Angle, 100mm Overall Length - Teknik Makina
Take advantage of a compact, right‑hand toolholder that combines compatibility with CC-- 0602 indexable inserts and a slim 10 mm shank for stable clamping; the result is consistent finishing performance and reduced spindle load — order via Metav Werkzeuge or consult the technical team for application advice. Boring Bar S06H SCLCR (K100TM) — 8 mm, right‑hand holder, Teknik Makina A boring bar S06H SCLCR designed for external turning and finishing with CC-- 0602 indexable inserts, optimised for precise, low‑vibration operations in metalworking workshops and CNC turning centres. Right-hand toolholder for consistent chip control Compatible with CC-- 0602 indexable inserts 8 mm cutting diameter with 10 mm shank 100 mm overall length, lightweight 0.052 kg Stable cutting and repeatable results for precision turning This turning toolholder delivers stable cutting through a compact geometry that lowers vibration and improves tool life. The S06H SCLCR configuration is a recognised standard in turning toolholders and ensures secure seating of indexable inserts, simplifying insert changes and reducing downtime. The combination of a slim 10 mm shank and an 8 mm cutting diameter provides a balance between accessibility in tight bores and sufficient rigidity for finishing passes. The 95° cutting angle supports consistent corner engagement and predictable chip flow, which is beneficial in mixed‑batch or small‑series production. Efficiency and compatibility that reduce setup complexity Designed for use with CC-- 0602 insert geometry, this toolholder allows parts manufacturers to keep spare inserts and toolholders interchangeable across machines. The lightweight construction (0.052 kg) reduces dynamic loads on the spindle, improving acceleration and cycle time without compromising surface quality. The 25 mm cutting height ensures correct insert projection and clamping stability, while the right‑hand cutting direction matches standard turning operations. Clear compatibility with commonly stocked insert sizes streamlines inventory and simplifies process planning for workshops and subcontractors. Built for workshop reliability with practical handling benefits The compact 100 mm overall length and standard ISO designation make the holder easy to fixture and fast to install in turret or boring bar systems. The straightforward clamping concept reduces handling time during tool changes and supports predictable machining results, which contributes to higher first‑pass yields. Metav’s supply philosophy — a quality filter in Emmerich with broad availability of precision tooling — complements the product’s practicality: reliable delivery and consistent part quality support continuous production without unexpected interruptions. Contact Metav Werkzeuge for tailored technical advice or procurement support for Teknik Makina toolholders — assistance is available by phone or e‑mail to ensure correct selection and rapid delivery Technical data Article number: K100TM Manufacturer: Teknik Makina ISO designation: S06H SCLCR Description: Boring bar / toolholder for indexable inserts (SCLC type) Facts Cutting diameter: 8 mm Shank diameter: 10 mm Cutting height: 25 mm Overall length: 100 mm Weight: 0.052 kg Cutting angle: 95° Cutting direction: right Special features Compatible with CC-- 0602 indexable inserts SCLC holder type for secure insert clamping Lightweight design for reduced spindle load Suitable for external turning and finishing operations FAQ What insert size fits this toolholder? The boring bar accepts CC-- 0602 indexable inserts; the holder is specified for this insert format to ensure correct seating and chip control. Is the holder suitable for finishing cuts on small diameters? Yes. The compact geometry and 10 mm shank provide the rigidity required for finishing passes on small diameters while keeping access in confined areas. Which cutting direction is intended for this toolholder? This holder is configured for right‑hand cutting, matching standard lathe turning directions and insert orientations. What is the ISO designation and how does it help in selection? The ISO designation S06H SCLCR identifies the holder form and mounting style, aiding compatibility checks with turrets and cross‑slides during tool planning. Can this holder reduce cycle times on medium‑run parts? The lightweight construction and stable clamping help reduce dynamic spindle loads and improve acceleration, which can contribute to shorter cycle times on medium‑run production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
8mm S08H SCLCR Drilling Bar For CC-- 0602 Indexable Inserts, 95° Cutting Angle, 100mm Overall Length - Teknik Makina
Take advantage of a compact, indexable solution that combines precise compatibility with CC-- 0602 inserts and a rigid S08H SCLCR holder for stable turning performance; order the K102TM boring bar directly via Metav Werkzeuge or consult the technical team for tailored guidance. K102TM Boring Bar (S08H SCLCR) – Ø8 mm cutting diameter, 100 mm overall length, for CC-- 0602 indexable inserts (Teknik Makina) K102TM Boring Bar is a right‑hand turning/boring tool holder engineered for external machining with CC-- 0602 indexable inserts, suitable for precision workshop and light production applications Right‑hand SCLCR holder Compatible with CC-- 0602 inserts Ø8 mm cutting diameter 100 mm overall length Predictable machining with proven insert compatibility The S08H SCLCR design ensures secure seating and repeatable positioning for indexable inserts, reducing setup variability and improving process reliability. Compatibility with CC-- 0602 inserts allows the bar to be used with common carbide grades and geometries, which supports consistent chip formation and surface finish. The right‑hand orientation and the S08H SCLCR mounting standard make the tool straightforward to integrate into existing toolholders and turret systems, helping to shorten machine downtime and maintain cycle times. Stable clamping and geometry for reduced vibration A cutting diameter of Ø8 mm combined with a shaft Ø10 mm and 100 mm overall length delivers a balance between accessibility and stiffness that suits external turning tasks where tool deflection must be minimised. The cutting height 16 mm and cutting angle 95° are configured to position the insert correctly relative to the workpiece centre, improving contact stability. With a mass of 0.053 kg, the bar offers low inertial load for smoother acceleration while retaining sufficient rigidity; this contributes directly to improved tool life and surface quality in short‑run and repeat operations. Simple integration into workshop routines and inventory Designed for indexable insert workflows, the bar accepts the standard CC-- 0602 pocket and is identified by the ISO designation S08H SCLCR, which aids in procurement and inventory control. The right‑hand cutting direction and compact Ø8 mm profile make the item a pragmatic choice for setups requiring narrow overhangs or access to confined geometries. Technical teams benefit from a familiar interface for insert change and clamping, which supports rapid replacement and reduces consumable-related delays in production. For procurement and technical enquiries about Teknik Makina tooling, contact Metav Werkzeuge for ordering and expert advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: K102TM Manufacturer: Teknik Makina Product type: Boring bar / tool holder ISO designation: S08H SCLCR Compatible inserts: CC-- 0602 Cutting direction: right Dimensions & weights Cutting diameter: 8 mm Shaft diameter: 10 mm Cutting height: 16 mm Overall length: 100 mm Cutting angle: 95° Weight: 0.053 kg Features SCLC for CC-- Indexable Inserts Holder size: 06 Right‑hand orientation Compact design for reduced overhang FAQ Which insert size fits this tool? The bar is specified for CC-- 0602 indexable inserts and is designed to accept that pocket size for straightforward insert replacement. Is the tool right‑hand or left‑hand? The holder is a right‑hand SCLCR type, intended for conventional right‑hand external turning operations. What is the effective cutting diameter? The effective cutting diameter for the tool is Ø8 mm, suitable for narrow‑profile external cuts and light boring tasks. How long is the bar and how does that affect rigidity? The overall length is 100 mm; the relatively short overhang combined with a shaft Ø10 mm helps maintain stiffness and reduce vibration in typical workshop setups. What standard identifies the holder geometry? The tool carries the ISO designation S08H SCLCR, which identifies its mounting style and helps ensure compatibility with corresponding toolposts and turrets. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
9.5mm Thread Milling Cutter For S12–S40 Indexable Inserts, Internal Coolant - Teknik Makina
Take advantage of a compact, indexable solution that combines internal coolant, a 20 mm shank and cross-compatible insert mounting for efficient thread milling across multiple insert sizes; order the tool via Metav Werkzeuge or consult our specialists for setup recommendations. Thread milling cutter DC201TM — for S12, S14, S21, S30 and S40 indexable inserts, 9.5 mm Ø A thread milling cutter DC201TM engineered for precision thread production in CNC and milling operations, compatible with a range of indexable inserts and designed for stable clamping and controlled coolant feed. Internal coolant for reliable cooling 20 mm shank for secure machine mounting Compatible with S12–S40 indexable inserts 9.5 mm nominal cutting diameter Consistent machining quality with built-in coolant control The DC201TM is devised for steady thermal management during thread generation: the internal coolant channel supplies coolant directly to the cutting zone, reducing heat build-up and extending insert life. With a 9.5 mm nominal cutting diameter and a robust 85 mm overall length, the tool balances rigidity and accessibility for common threading tasks. The design benefits shops machining medium to high-strength materials where temperature control and repeatable chip evacuation noticeably improve process stability. This results in fewer rejects and longer tool cycles — a clear operational advantage for production-focused workshops. Reduced downtime through standardised inserts and rapid clamping The indexable system accepts S12 through S40 sizes, enabling flexible adaptation to thread profiles and wear stages. Fast and reliable clamping is achieved by the retained Torx screw M2.5x5.5 and the matching T8 key, which together allow quick insert changes and minimal set-up time. The 20 mm shank provides a stable interface with common toolholders, improving concentricity and reducing vibration. These attributes translate into measurable efficiency: shorter tool-change intervals, predictable maintenance, and a clearer return on machining hours when compared with solid-thread solutions. Workshop-ready construction for repetitive production Built for continuous use in industrial environments, the cutter’s geometry and mounting specifications focus on process security and operator convenience. Compatibility across several insert formats reduces inventory complexity, while the 20 mm shank and standardised fixing hardware simplify fixture planning. The combination of a compact 9.5 mm cutting diameter and an 85 mm overall length makes the tool suitable for tight component geometries without compromising stability. For operations prioritising throughput, the cutter offers a pragmatic balance of precision, flexibility and straightforward serviceability. For deployment advice or to arrange a tailored technical recommendation for Teknik Makina’s DC201TM, contact Metav Werkzeuge in Emmerich by phone at +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com — our consultants will assist with mounting and process optimisation Technical data Article number: DC201TM Manufacturer: Teknik Makina Shank diameter: 20 mm Cutting diameter: 9.5 mm Overall length: 85 mm Torx screw: M2.5x5.5 Torx key size: T8 EClass: 21180805 ETIM: EC011860 Features Internal coolant: yes Compatible inserts: S12, S14, S21, S30, S40 Suitable for indexable insert thread milling Robust construction for CNC use FAQ What insert sizes fit this thread milling cutter? The cutter accepts S12, S14, S21, S30 and S40 indexable inserts, enabling flexible selection of insert geometry for different thread forms. Is coolant supplied through the tool? Yes — the tool features internal coolant, which directs cutting fluid to the cutting edge to reduce heat and improve chip control. What shank diameter is required for mounting? A 20 mm shank diameter is specified for stable clamping and compatibility with standard toolholders. Which fastening hardware is used for insert retention? Insert retention uses a Torx screw (M2.5x5.5) secured with a T8 key for rapid and reliable insert changes. Can this cutter be used for high-production CNC threading? The cutter is designed for industrial CNC applications where repeatability and reduced downtime are priorities, thanks to its insert system and coolant provision. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
9.9mm Thread Milling Cutter for S12, S14, S21, S30 and S40 Indexable Inserts, 85mm Overall Length - Teknik Makina
Combine secure clamping with broad insert compatibility to maintain consistent thread quality and reduce tool change downtime. Order the tool via Metav Werkzeuge or consult our machining experts for process integration. Thread milling cutter DC202TM — 9.9 mm diameter, 20 mm shank (Teknik Makina) The Thread milling cutter DC202TM is a precision CNC tool intended for thread milling with indexable inserts across a range of insert sizes, suitable for flexible workshop and production use. Compatible with S12 to S40 indexable inserts Precise 9.9 mm diameter for accurate thread forms 20 mm shank for stable clamping in tool holders Torx M2.5x5.5 fixing screw with T8 key Consistent thread geometry through insert versatility The cutter delivers repeatable thread profiles by combining a compact cutting head with proven insert standards. The 9.9 mm diameter provides a predictable cutting footprint, while the acceptance of indexable inserts enables rapid restoration of cutting edges without the need for full-tool replacement. For shops that value uptime, this approach reduces overall tooling costs and simplifies inventory management by allowing a single holder to work with several insert grades and geometries. The DC202TM is therefore well suited to medium-duty thread milling operations where consistency matters. Stable clamping and rapid insert changes for productive cycles A robust 20 mm shank gives the milling tool secure seating and reduces runout, which directly improves surface finish and concentricity of the machined thread. Insert retention is managed via a Torx M2.5x5.5 fixing screw secured with a T8 key, enabling quick, tool-assisted insert changes with consistent torque. The mechanical simplicity of this fastening system supports predictable clamping force and reduces the risk of insert movement under load. Fewer handling steps and reduced set-up time translate into shorter cycle times and improved overall process reliability. Workshop-friendly design that supports flexible production With an 85 mm overall length, the tool balances accessibility in confined setups with sufficient reach for a wide range of CNC applications. Classification data such as eClass 21180805 and ETIM EC011860 reference its placement in cutting-tool taxonomies, helping procurement and maintenance teams to match the tool with existing systems and documentation. The cutter’s compatibility with S12, S14, S21, S30 and S40 indexable inserts makes it a practical choice for suppliers and contract manufacturers seeking a single milling solution that covers multiple thread types and material mixes while keeping inventory lean. Discuss machining requirements with Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm fitment, delivery options and insert recommendations for the Teknik Makina DC202TM thread milling cutter Technical data Article number: DC202TM Manufacturer: Teknik Makina eClass: 21180805 ETIM: EC011860 Facts Diameter: 9.9 mm Overall length: 85 mm Shank diameter (aufnahme): 20 mm Special features Compatible with S12, S14, S21, S30 and S40 indexable inserts Torx screw: M2.5x5.5 Torx key: T8 Intended for thread milling operations FAQ Which insert sizes fit this cutter? The cutter accepts S12, S14, S21, S30 and S40 indexable inserts, enabling selection of the appropriate insert geometry for the required thread form and material. Is the shank diameter suitable for standard tool holders? Yes — the 20 mm shank diameter matches common collet and hydraulic holder sizes, providing secure clamping for the DC202TM milling tool. How are inserts secured and serviced? Inserts are fastened with a Torx M2.5x5.5 screw using a T8 key, allowing quick, repeatable insert changes with standard workshop tools. What advantages do indexable inserts bring to thread milling? Indexable inserts permit fast edge renewal without discarding the whole tool, reducing downtime and lowering tooling costs while maintaining consistent thread geometry. Is the DC202TM suitable for high-volume production? Its combination of a stable 20 mm shank and broad insert compatibility makes the DC202TM by Teknik Makina appropriate for many production environments where regular tool changes and predictable results are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
9mm S06H SCLCL Drill Bar SCLC For CC-- Indexable Inserts, 95° Cutting Angle - Teknik Makina
Take advantage of a compact combination of precise tool geometry, reliable insert compatibility and straightforward handling for reduced setup time and consistent cycle results. The compact design with an 8 mm shank and 100 mm overall length supports small‑diameter turn and bore operations while keeping changeover fast. Order via Metav Werkzeuge or consult their specialists for application advice and delivery from Emmerich. K230TM Boring Bar (S06H SCLCL) — Left‑hand, for CC--0602 inserts by Teknik Makina A K230TM boring bar for left‑hand machining, engineered to accept CC--0602 indexable inserts and to perform in confined toolposts and small bores. Left‑hand cutting orientation Compatible with CC-- 0602 inserts 8 mm shank diameter 100 mm overall length 95° cutting angle Stable small‑diameter performance for predictable results The compact design delivers high rigidity in applications where stability is critical. With an 8 mm shank and a nominal diameter 9 mm, the toolholder reduces deflection in constrained set‑ups, which improves dimensional repeatability on serial parts. The ISO designation S06H SCLCL denotes a standard interface that suits typical clamp systems, allowing secure mounting and predictable geometry. As a result, machining tolerances can be achieved more consistently and scrap rates are lowered, supporting efficient production cycles. Faster insert changes and controlled cutting behaviour Thanks to compatibility with CC--0602 indexable inserts, insert replacement is rapid and repeatable, reducing downtime and tooling consumption. The 95° cutting angle and cutting height 25 mm ensure the insert seats at the intended geometry, providing consistent chip formation and tool life under stable cutting conditions. This specification proves advantageous when machining a range of steels and other common workshop materials using small‑diameter toolholders, since predictable edge engagement minimises rework and tool‑related variability. Compact handling that supports workshop flexibility At only 100 mm overall length and a weight of 0.052 kg, the bar is easy to position and manoeuvre during set‑up or changeover, which helps to speed internal operations in busy shops. The left‑hand cut orientation expands capability for specific turning sequences and complements right‑hand counterparts within a tooling portfolio. Supplied with the ISO toolholder form and a clamp designation suited to module 06, the component integrates into standard lathe toolposts without additional adaptation, improving throughput for small‑series manufacturing and prototype tasks. For application guidance on this Teknik Makina K230TM boring bar and fast supply from Metav Werkzeuge, contact Metav Werkzeuge GmbH in Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery options. Technical data Article number: K230TM Manufacturer: Teknik Makina Product designation ISO: S06H SCLCL Short description EN: SCLC for CC-- Indexable Inserts Cutting direction: left Facts Shank diameter: 8 mm Cutting height: 25 mm Weight: 0.052 kg Diameter: 9 Overall length: 100 mm Cutting angle: 95° Special features Compatible inserts: CC-- 0602 Clamp designation: 06 Suitable for indexable inserts: CC-- 0602 Story trigger: bohrstange FAQ Which inserts fit this toolholder? The K230TM accepts CC--0602 indexable inserts; the geometry and seat height are matched to this insert size for consistent cutting performance. Is the bar suitable for small‑diameter internal machining? Yes. With an 8 mm shank and compact form, the bar is designed for confined toolposts and small‑diameter internal operations where rigidity and clearance are required. What is the cutting angle and why does it matter? The tool features a 95° cutting angle, which helps control edge engagement and chip flow, supporting stable cutting and repeatable results in turning and boring tasks. How long and how heavy is the tool? Overall length is 100 mm and the weight is 0.052 kg, which makes handling and set‑up straightforward in workshop environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
A10J SDUCL 07 Boring Bar Cooling for DC-- 0702 Indexable Inserts - Teknik Makina
Comprehensive Technical Specifications: Order Number: KA250TM Item: Boring Bar usable with DC-- 0702 Indexable Inserts Brand: Teknik Makina ISO Code: A10J SDUCL 07 Numbers and Data: Diameter: 16mm Weight: 0.12kg Total length: 125mm Cutting Height: 25mm Additional Informattion Cutting Direction: links Cooling Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
A10J SDUCR 07 Bohrstange Innenkühlung für DC-- 0702 Wendeplatten - Teknik Makina
Besonderheiten Bohrstange mit Innenkühlung passend für DC-- 0702 Wendeplatten Schnittwinkel 93° Durchmesser: 16mm Schnittrichtung: rechts Bohrstange A10J SDUCR 07mit Innenkühlungvon Teknik Makina für alle ISO Wendeschneidplatten DC-- 0702. Hier erhalten Sie die passenden Wendeplatten. Dank der exakten Verarbeitung ist ein perfekter Plattensitz gewährleistet, sodass ein Verrutschen unmöglich ist. Die Wendeschneidplatten wird fest auf dem Bohrstange verschraubt. Die Schrauben lassen sich schnell lösen. So können die Wendeplatten schnell ausgetauscht und die Bearbeitung weitergeführt werden. Ein Schnittwinkel von 93° sichert die Erstellung präziser Oberflächen. Dieses Tool hat eine interne Kühlung. An der Schneidkante wird beim Zerspanen Wärme erzeugt. Diese Wärme wird entweder durch die abgezogenen Späne oder durch den Schaft des Werkzeugs abgeführt und im Material selbst festgehalten. Hierdurch wird eine Kühlung zumeist unvermeidlich. Kühlmaßnahmen haben bedeutenden Einfluss auf die Entfernung der Späne, die Güte der Zerspanung und die Dauerhaftigkeit des Werkzeugs. Werkzeuge mit Innenkühlung verfügen über durchgehende Kanäle, in welchen das Kühlschmiermittel an das zu bearbeitende Material leiten. Unter dem Einfluss des Kühlmitteldrucks werden die erhitzten Späne heruntergekühlt und aus der Bohrung hinausgespült. Hierdurch entsteht ein Schmierfilm zwischen Werkzeug und Material, der die Reibung minimiert, die Temperatur senkt und die Standzeiten erhöht. Werkzeuge mit Innenkühlung eignen sich auch für sehr tiefe Bohrungen. Hier finden Sie den kompletten Katalog von Teknik Makina als PDF zum Download. Technische Daten: Bezeichnung: Bohrstange ISO Bezeichnung: A10J SDUCR 07 Hersteller: Teknik Makina Bestellnummer: KA120TM mit Innenkühlung passend für DC-- 0702 Wendeplatten Durchmesser: 16mm Schnittwinkel 93° Gesamtlänge: 125mm Schnitthöhe: 25mm Schnittrichtung: rechts Artikelgewicht: 0,12kg Jetzt Bohrstange für DC-- 0702 Wendeschneidplatten bestellen. Teknik Makina, der Hersteller in einigen Worten: Teknik Makina wurde 1987 in der Türkei gegründet und startete 1994 mit der Herstellung von Schneidwerkzeugen. Im Jahr 2015 wurde die Produktion in ein modernes Fabrikgebäude im vierten Industriegebiet von Konya verlegt, wo mehr als 5.000 verschiedene Werkzeuge gefertigt werden. Mit 40 Produktionslinien, die gleichzeitig in mehreren Kategorien arbeiten, ist das Unternehmen gut aufgestellt. Die Produktions- und Designteams sind bestens ausgebildet und nach ISO 9001:2015 zertifiziert, um Ihnen prozesssichere Dienstleistungen bieten zu können. Angaben zur Produktsicherheit für das Werkzeug 16mm Bohrstange für DC-- 0702 Wendeschneidplatten mit der Bestellnummer .KA120TM Hersteller Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Verantwortliche Person Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com
A20R PWLNR 06 Boring Bar Cooling for WNMG 0604 Indexable Inserts - Teknik Makina
Detailed Technical Data: Order Number: AP382TM Item: Boring Bar usable with WNMG 0604 Indexable Inserts Brand: Teknik Makina ISO Code: A20R PWLNR 06 Numbers and Data: Diameter: 25mm Weight: 0.471kg Total length: 200mm Cutting Height: 40mm Additional Informattion Cutting Direction: rechts Cooling Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
A32T PWLNR 08 Boring Bar Cooling for WNMG 0804 Indexable Inserts - Teknik Makina
Product Technical Details: Order Number: AP362TM Item: Boring Bar usable with WNMG 0804 Indexable Inserts Brand: Teknik Makina ISO Code: A32T PWLNR 08 Structural Details: Diameter: 40mm Weight: 1.764kg Total length: 300mm Cutting Height: 60mm Additional Informattion Cutting Direction: rechts Cooling Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
S20Q SDXCR 11 Boring Bar for DC-- 11T3 Indexable Inserts - Teknik Makina
Product Technical Specifications: Order Number: K472TM Item: Boring Bar usable with DC-- 11T3 Indexable Inserts Brand: Teknik Makina ISO Code: S20Q SDXCR 11 Numbers and Data: Diameter: 25mm Weight: 0.435kg Total length: 180mm Cutting Height: 40mm Additional Informattion Cutting Direction: rechts Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
S20Q SVQCL 11 Boring Bar for VCMT 1103 Indexable Inserts - Teknik Makina
Detailed Technical Data: Order Number: K320TM Item: Boring Bar usable with VCMT 1103 Indexable Inserts Brand: Teknik Makina ISO Code: S20Q SVQCL 11 Numbers and Data: Diameter: 25mm Weight: 1.762kg Total length: 180mm Cutting Height: 30mm Additional Informattion Cutting Direction: links Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
S20R MTUNL 16 Boring Bar for TNMG 1604 Indexable Inserts - Teknik Makina
Characteristics: Item: Boring Bar ISO Code: S20R MTUNL 16 Brand: Teknik Makina Order Number: K519TM usable with TNMG 1604 Indexable Inserts Diameter: 25mm Angle: 93° Total length: 200mm Cutting Height: 50mm Cutting Direction: links Weight: 0.513kg Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
S25S PDUNL 15 Boring Bar for DNMG 1506 Indexable Inserts - Teknik Makina
Technical Information: Order Number: P310TM Item: Boring Bar usable with DNMG 1506 Indexable Inserts Brand: Teknik Makina ISO Code: S25S PDUNL 15 Numbers and Data: Diameter: 32mm Weight: 0.93kg Total length: 250mm Cutting Height: 50mm Additional Informattion Cutting Direction: links Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
S40T MWLNR 08 Boring Bar for WN-- 0804 Indexable Inserts - Teknik Makina
Technical Information: Order Number: K432TM Item: Boring Bar usable with WN-- 0804 Indexable Inserts Brand: Teknik Makina ISO Code: S40T MWLNR 08 Numerical Representations: Diameter: 50mm Weight: 2.841kg Total length: 300mm Cutting Height: 60mm Additional Informattion Cutting Direction: rechts Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
Satz 10-20mm Boring Bar Set With Or Without Coolant, Right-Hand, 4 Pieces - Teknik Makina
Take advantage of a compact tooling solution that blends process reliability, straightforward compatibility and flexible coolant options; the set’s diameters 10–20 mm range and right-hand cutting ensure consistent chip control, while availability with or without internal coolant lets production cells be adapted to existing coolant circuits — order via Metav Werkzeuge or consult the specialists for an application match. Bohrstangen-Set (Drill Rod Set) by Teknik Makina — right-hand, optional internal coolant, diameters 10–20 mm A Bohrstangen-Set intended for turning operations and indexable insert holders, available with or without coolant supply for flexible machine integration Right-hand cutting direction Compatible with CC--0602 & CC--09T3 inserts Set covers diameters 10–20 mm Stable process performance through controlled chip evacuation The set was created to provide consistent cutting behaviour in standard turning tasks where reproducibility matters. The option to specify internal coolant supports directed lubrication and cooling at the cutting zone, reducing heat build-up and improving tool life; combined with the right-hand cutting geometry this leads to predictable chip flow and stable surface finishes. These characteristics translate into fewer tool changes and less downtime in routine production runs. Versatile compatibility that reduces tooling complexity Supplied as a 4-piece set, the holders in this package accept common indexable inserts (notably CC--0602 and CC--09T3) and correspond to the toolholder types listed in the content (e.g. A08H SCLCR 06, A16M SCLCR 09). This compatibility allows consolidation of insert stocks and simplifies reconditioning routines. Fast mechanical fastening is achieved using the specified Torx standards (Torx T8/T15) and the matching screws (M2.5x5.5 and M3.5x8.5), facilitating reproducible clamp forces and reliable repeatability at changeover. Practical design for quick set-up and reliable handling The set’s compact mass (0.464 kg) and clear diameter range (10–20 mm) make it suitable for small to medium-sized turning centres where handling and storage efficiency are priorities. The holders are designed for straightforward insert replacement and secure clamping, which reduces set-up time. Documentation and part references are streamlined so maintenance teams can identify the correct insert geometries and fastening components without prolonged trial and error. Contact Metav Werkzeuge for an application check and rapid supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the Teknik Makina drill rod set and compatibility with existing tooling systems Technical Data Article number: IPS01TM Manufacturer: Teknik Makina Content: A08H SCLCR 06, A10J SCLCR 06, A12K SCLCR 06, A16M SCLCR 09 Facts Weight: 0.464 kg Set: yes Pieces per set: 4 Diameter range: 10–20 mm Cutting direction: right Special features Internal coolant: yes (with or without coolant option) Compatible inserts: CC--0602, CC--09T3 Torx keys: T8 and T15 Screws: M2.5x5.5 and M3.5x8.5 FAQ What insert types fit this set? The Bohrstangen-Set accepts indexable inserts of the CC--0602 and CC--09T3 types; the holders listed in the content correspond to these insert geometries. Is internal coolant included or optional? The drill rod set is available with or without internal coolant; specify the coolant option when ordering to ensure compatibility with existing machine coolant circuits. How many holders are supplied in one set? One set contains four holders, as stated under pieces per set; the set covers diameters from 10 to 20 mm. Which fastening tools and screws are relevant for assembly? Assembly and clamping reference Torx keys T8 and T15 and the screws M2.5x5.5 and M3.5x8.5 to achieve the required clamp forces and repeatable positioning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Satz 10-20mm Drill Rod Set With Or Without Coolant, Left-Hand, 0.96kg - Teknik Makina
Take advantage of the left-hand cutting geometry and the internal coolant option to streamline internal turning operations while maintaining tool life and chip control; order the set directly via Metav Werkzeuge or ask the consultants for application advice. Boring Bar Set IPS21TM – left-hand cutting, with or without coolant (Teknik Makina) The Boring Bar Set IPS21TM supplies left-hand boring bars suitable for CNC turning and internal machining, available in variants with or without internal coolant to match different process requirements Left-hand cutting direction for specific turning tasks Compatible with CC-0602 and CC-09T3 indexable inserts Set covers diameters 10–20 mm for internal boring Option for internal coolant or non-coolant use Engineered for precision in internal turning The set is designed around a left-hand cutting geometry that is optimised for particular internal turning tasks where tool orientation and chip flow are critical. The bars accept common indexable inserts, specified for this range as CC-0602 and CC-09T3, which allows the machining strategy to be aligned with existing workshop tooling and inventory. Because the toolholders are made to secure indexable inserts reliably, tool changeovers are simplified and clamping repeatability is improved, which reduces downtime during batch production. The configuration is intended to support stable metal removal and to be suitable for integration into established CNC turning cycles. Control of cutting environment with optional internal coolant Available in a version with or without coolant, the set lets process planners choose coolant-fed holders where improved lubrication and chip evacuation are required. When the internal coolant option is selected, coolant is delivered close to the cutting zone, which can support longer insert life and more consistent cutting temperatures. The variant without coolant is provided for dry machining or for applications where external coolant is already optimised. Mounting and coolant interfaces are designed to fit common lathe toolpost arrangements, and the left-hand orientation is retained across both variants to maintain programme consistency. Practical range and workshop benefits for efficient production The assortment covers a diameter range of 10–20 mm, providing a compact but versatile selection for internal boring operations. The composition of the set is geared towards everyday turning tasks and is presented to integrate with standard insert geometries, enabling quick adaptation to part-specific demands. Assembly and fastening use familiar hardware sizes, including Torx T8/T15 keys and the matching Torx screws M2.5×5.5 and M3.5×8.5, which are included in the technical specification to facilitate maintenance and reconfiguration. The complete set weighs 0.96 kg, making it manageable for handling and storage while still robust enough for industrial use. Teknik Makina's design emphasis on compatibility and process flexibility supports efficient workshop workflows and predictable results. Contact Metav Werkzeuge in Emmerich for tailored technical advice on Teknik Makina's IPS21TM boring bar range or to discuss the coolant variant that best suits the production requirement: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: IPS21TM Manufacturer: Teknik Makina ECLASS: 21189217 Facts Diameter range: 10–20 mm Weight: 0.96 kg Pieces per set: 4 Special features Left-hand cutting direction Variants: with or without internal coolant Compatible inserts: CC-0602, CC-09T3 Torx keys: T8 and T15 Torx screws: M2.5×5.5 and M3.5×8.5 Content designations: S08H SCLCL 06, S10J SCLCL 06, S12K SCLCL 06, S16M SCLCL 09 FAQ What insert types fit this boring bar set? The boring bar set accepts CC-0602 and CC-09T3 indexable inserts, enabling compatibility with common insert geometries and simplifying inventory alignment for the workshop. Is there a coolant-fed option for the bars? Yes, the IPS21TM is available with or without internal coolant, allowing selection of a coolant-fed holder where closer lubrication and improved chip evacuation are required. Which cutting direction is provided by these bars? These toolholders feature a left-hand cutting orientation, which is maintained across both coolant and non-coolant variants for consistent programme setup. What diameter range does the set cover? The set covers a 10–20 mm range suitable for a variety of internal boring tasks and for integration with standard lathe setups. Are the necessary fastening tools specified? The technical specification lists Torx T8/T15 keys and the matching Torx screws M2.5×5.5 and M3.5×8.5 to support secure assembly and straightforward maintenance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Achieve exact bores with a boring bar with internal coolant
A boring bar with internal coolant is a specialised tool for internal machining on lathes and machining centres, designed to enlarge and finish existing holes to precise dimensional and form tolerances. Also referred to as an internal coolant boring bar or coolant‑fed boring bar, this tool class routes coolant through the tool body so that cutting edges are supplied directly with fluid under pressure.
How internal coolant keeps deep and blind bores reliable
When machining with external coolant only, the fluid is delivered from outside via machine nozzles and often fails to reach the cutting zone in longer bores, leaving chips trapped and increasing thermal load. A boring bar with internal coolant contains axial coolant channels that run through the tool shank to the cutting edge, delivering high‑pressure coolant where it is needed. This arrangement is essential for machining deep bores, blind holes and for materials that produce long, continuous chips; it lowers local temperatures, flushes chips out of the bore and reduces the risk of tool breakage and surface damage.
Key advantages that improve productivity
- Faster cycle reliability: internal coolant reduces thermal distortion and helps maintain tight tolerances over longer runs.
- Improved chip evacuation: pressurised coolant clears chips from the cutting zone, preventing chip clogging and re-cutting.
- Extended tool life: cooler cutting edges and effective flushing reduce wear and the likelihood of catastrophic tool failure.
- Process versatility: suitable for deep bores and blind holes, especially in difficult‑to‑machine or long‑chipping materials.
Metav as the practical partner for precision tooling
Metav stands for the democratisation of precision and is positioned as a pragmatic partner for industry and workshops. Based in Emmerich, Metav combines hands‑on technical expertise with a broad supply range: over 250,000 products and a proven track record with more than 48,000 customers, ensuring steady availability and a quality filter for the European market. For buyers seeking coolant‑fed solutions, Metav offers curated assortments and selection guidance for boring bars with internal coolant.
In summary, a boring bar with internal coolant delivers targeted cooling and chip control that is indispensable for deep and blind bores, improving tolerance control, tool life and process stability.
FAQ
When should a boring bar with internal coolant be chosen over external coolant?
Select a boring bar with internal coolant whenever bores are deep or blind, or when machining hard‑to‑cut or long‑chipping materials; the internal coolant ensures reliable chip evacuation and temperature control where external coolant cannot reach.
How do axial coolant channels reduce the risk of tool breakage?
Axial coolant channels feed high‑pressure coolant directly to the cutting edge, lowering thermal stress at the point of generation and flushing chips away, which together reduce flank wear and the chance of sudden tool failure when using a boring bar with internal coolant.
Can internal coolant boring bars be used on both lathes and machining centres?
Yes. The internal coolant design is compatible with standard toolholders used on lathes and machining centres, making the internal coolant boring bar a flexible choice across machine platforms.
Which workpiece materials benefit most from coolant‑fed boring bars?
Materials that produce long, continuous chips or that are prone to thermal softening during cutting—such as certain stainless steels and high‑strength alloys—benefit markedly from the chip flushing and cooling provided by a boring bar with internal coolant.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com