Precision calipers for reliable industrial measurement
Precision calipers and their variants provide fast, repeatable outside, inside, depth and step measurements to ensure component conformity and process control on the shopfloor, combining mechanical robustness with digital data handling for traceable results. Designed for use in industrial quality assurance and manufacturing, these calipers serve applications from rough workshop environments to precision inspection, with options such as analogue vernier calipers for durable, battery‑free operation and digital calipers offering clear displays and data output to speed up quality workflows. Specialist formats, including workshop calipers with extended ranges and built‑in mounting calipers for machine or fixture monitoring, extend capability to long strokes and embedded measurement tasks, while bespoke models handle deep grooves, pipe wall thicknesses and three‑point or other complex geometries. The range emphasises highest accuracy and process integration, featuring high‑end touchscreen models with integrated microcomputers, wireless data transfer and Industry 4.0 compatibility to modernise measurement and quality data capture.
150mm Precision Caliper E‑Ink Display, Wireless USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of certified traceability, a low-profile E‑Ink display and flexible data transfer for faster inspection cycles; the fully ISO 17025 calibrated instrument supports reliable decisions on the shop floor. Order the caliper directly via Metav Werkzeuge or consult the Metav team for application advice. Precision Caliper (0–150 mm) by Microtech Metrology — E‑Ink display & Wireless+USB A Precision Caliper for workshop and quality‑control tasks, offering a clear 2.13″ E‑Ink display, USB and wireless data transfer, and factory calibration to ISO 17025. E‑Ink 2.13″ display for clear readings Wireless and USB data output ISO 17025 calibration with certificate 0–150 mm standard measurement range Round depth gauge included Certified accuracy that shortens inspection loops The instrument arrives fully calibrated to ISO 17025, supplied with a calibration certificate for immediate use in traceable quality procedures. The combination of a fine 0.01 mm resolution and an indicated accuracy of ±0.015 mm makes the tool suitable for standard workshop tolerances and routine incoming‑goods checks. These specifications reduce rework and speed approvals because measurements are both reproducible and auditable within established quality systems. Fast data capture for modern measurement workflows Integrated Wireless+USB data output avoids transcription errors and connects directly to inspection software or spreadsheets, increasing throughput during serial checks. The low‑power E‑Ink display remains readable under workshop lighting and minimises battery changes, while the digital readout ensures clear numeric values. The caliper’s electronic interface supports streamlined documentation and saves time when logging results for certificates or batch records. Robust, practical design for daily use Designed for the universal shop standard, the 0–150 mm range is classified as Standard, offering a balance between reach and rigidity for most machine‑shop tasks. A round depth gauge is fitted for reliable depth and step measurements, turning a single instrument into a versatile inspection tool. The housing and linear guide are engineered for repeatable handling; this reduces operator influence on readings and maintains stable performance across shifts. What inspectors and machinists gain in practice Using a calibrated digital caliper with direct data output improves traceability and reduces administrative overhead during audits or supplier checks. The device replaces manual note‑taking with error‑free digital transfer, while the ISO 17025 certificate supports integration into formal inspection routines. For teams seeking dependable everyday measurement, this instrument combines clarity, connectivity and certified accuracy to meet typical industrial quality demands. Contact Metav Werkzeuge for personalised advice and secure this Microtech Metrology Precision Caliper with ISO 17025 certificate and Wireless+USB output for immediate integration into production control. Technical Data Article number: 141093015B GTIN: 4061905100130 Brand: Microtech Metrology eCl@ss: 21170344 Facts Measuring range: 0–150 mm Resolution: 0.01 mm Indicated accuracy: 0.015 mm Display size: 2.13″ Special features Digital instrument, E‑Ink 2.13″ display Data output: Wireless + USB Supplied calibrated to ISO 17025 with certificate Includes round depth gauge No measuring faces option specified FAQ How accurate is the caliper for routine quality checks? The caliper from Microtech Metrology delivers an indicated accuracy of ±0.015 mm with a 0.01 mm resolution, suitable for standard workshop and quality‑control inspections. Is the instrument ready to use for traceable measurements on arrival? Yes. The tool is supplied fully calibrated to ISO 17025 and includes a calibration certificate for immediate use in traceable measurement processes. Which data interfaces are available for recording results? Results can be exported via the integrated Wireless+USB connections, enabling direct transfer into inspection software or data logs. Does the caliper include a depth gauge for step and depth measurements? A round depth gauge is included, expanding the instrument’s use to depth and step measurements alongside external and internal checks. Is the 0–150 mm range suitable for general workshop applications? The 0–150 mm measuring span is classified as Standard, offering the best compromise between reach and stiffness for everyday machining and assembly tasks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Precision Caliper For Pipe Wall Thickness Measurement Color 1.5" Touchscreen, IP54 - Microtech Metrology
Delivered fully calibrated to ISO 17025 with a traceable calibration certificate, this instrument combines high-resolution measurement and flexible data transfer for reliable quality control. Benefit from the colour touchscreen, Wireless + USB output and IP54 protection for fast, documented inspections — order via Metav Werkzeuge or contact their consultants for technical advice. Digital caliper — Microtech Metrology, colour touchscreen and wireless data output A digital caliper designed for workshop and laboratory use, offering a 1.5" colour touchscreen and both wireless and USB data transfer for streamlined measurement workflows. ISO 17025 calibrated instrument Colour 1.5" touchscreen display Wireless and USB data output Measuring range 0–150 mm, 0.005 mm resolution Traceable calibration that reduces measurement uncertainty Delivered with an ISO 17025 calibration certificate, this instrument ensures traceable measurements suitable for incoming inspection and process control. A documented calibration reduces audit effort and supports compliance with quality management systems; the supplied certificate confirms that the device was verified against recognised standards, enabling immediate use in documented testing routines without additional laboratory downtime. Fast data capture to speed up quality routines Equipped with Wireless and USB interfaces combined with a colour 1.5" touchscreen, the caliper simplifies data acquisition and transfer into inspection software or spreadsheets. Digital readout and direct export minimise transcription errors and accelerate batch testing, which translates to a measurable increase in throughput during repetitive measurement tasks while maintaining reliable data integrity for reporting. Robust design for daily shop-floor and lab use Rated IP54 for dust and splashing protection and classified as a standard caliper based on its 0–150 mm range, the instrument balances reach and stiffness for everyday mechanical and metalworking measurements. With a reading step of 0.005 mm and a measurement force range of 1–20 N, it supports precise external, internal and depth measurements while standing up to routine handling on the shop floor. The compact jaw geometry and 46 mm measuring faces make it suitable for confined spaces without compromising stability. For traceable precision and efficient data handling choose Microtech Metrology's calibrated digital caliper — contact Metav Werkzeuge for procurement or technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 141230157 GTIN: 4061905037542 Manufacturer: Microtech Metrology Facts Measuring range: 0–150 mm Resolution/reading: 0.005 mm Measurement force: 1–20 N Jaw length: 46 mm Protection class: IP54 Display: Colour 1.5" touchscreen Special features Data output: Wireless + USB Delivered fully calibrated with ISO 17025 certificate Digital instrument for workshop and laboratory use Category: Standard caliper (0–300 mm class) FAQ Is the instrument supplied with a calibration certificate? Yes. The digital caliper from Microtech Metrology (SKU 141230157) is delivered fully calibrated and includes an ISO 17025 calibration certificate. How accurate is the measurement and what is the resolution? The device provides a reading step of 0.005 mm and is intended for high-precision workshop and lab tasks where sub-hundredth millimetre resolution is required. Can measurement data be transferred directly to inspection software? Yes. The caliper supports both Wireless and USB data output for direct integration with inspection software and data-logging systems. What does IP54 protection mean in practice? IP54 indicates protection against limited dust ingress and against water splashes; suitable for normal workshop conditions but not for full immersion. Is the measuring range suitable for general metalworking tasks? The 0–150 mm range places this instrument in the standard class, offering a practical balance of reach and rigidity for most machine-shop and maintenance measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Precision Caliper For Pipe Wall Thickness Measurement Digital 13mm Display IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of traceable ISO 17025 calibration together with an accurate 0–150 mm measuring range and USB data output for seamless documentation; this combination supports dependable pipe wall thickness control and efficient workshop workflows. Order the instrument directly via Metav Werkzeuge or contact our consultants for application advice. Digital caliper 0–150 mm – Microtech Metrology with USB output and IP54 protection Digital caliper 0–150 mm – Microtech Metrology designed for quick, reliable pipe wall thickness measurement in industrial and workshop settings, offering traceable calibration and robust data transfer. ISO 17025 calibrated and traceable USB data output for simple logging 0–150 mm measuring range, standard class IP54 protection for workshop conditions Traceable precision that supports inspection and production The calibrated instrument delivers a readable resolution of 0.01 mm and an operational accuracy of ±0.03 mm, enabling consistent wall‑thickness checks across batches. Supplied with an ISO 17025 calibration certificate, the device removes doubts about measurement traceability and supports quality documentation. This level of measured certainty reduces rework and helps maintain process stability in machine shops and quality departments. Fast data capture to reduce administrative effort Equipped with a USB data output and a clear 13 mm digital display, the caliper removes manual transcription from measurement routines. Direct digital transfer accelerates logging into inspection protocols or SPC systems, so measurement records are both faster to create and less prone to human error. The instrument therefore integrates smoothly into existing data workflows and supports efficient reporting for traceable quality control. Built for workshop conditions and pipe applications With an IP54 rating, the caliper withstands workshop dust and routine exposure to coolant splashes, so measurements remain reliable in demanding environments. The measuring cone has a diameter of 4 mm and the jaw length is 46 mm, optimised for assessing pipe wall thickness where access can be restricted. No additional measuring force mechanism is specified, which simplifies the handling concept and keeps the tool compact for regular inspection tasks. Contact Metav Werkzeuge for advice on this calibrated measuring instrument, request the ISO 17025 certificate or discuss integration into existing test procedures — Metav Werkzeuge supports buyers from Emmerich with a reliable supply chain and expert consultancy Technical data Article number: 141230150 GTIN: 4061905457692 Manufacturer: Microtech Metrology Facts Measuring range: 0–150 mm Resolution: 0.01 mm Accuracy: 0.03 mm Display height: 13 mm Measuring cone diameter: 4 mm Jaw length: 46 mm Protection class: IP54 Data output: USB Calibrated according to: ISO 17025 Special features Digital instrument for pipe wall thickness measurement Standard‑class caliper suitable for machine and metal workshops Supplied with ISO 17025 calibration certificate No specified measuring force Robust design for industrial use FAQ What measurement range does this caliper cover? The caliper covers a measuring range of 0–150 mm, making it a standard‑class instrument for general workshop and machine‑shop tasks. Is the instrument calibrated and traceable? Yes, the instrument is supplied fully calibrated with an ISO 17025 certificate issued by the manufacturer (Microtech Metrology), ensuring traceable measurements. How is measurement data transferred? Measurement values can be exported via USB for direct logging into inspection software or spreadsheets, enabling efficient documentation. Is the caliper suitable for use in a workshop environment? The caliper has an IP54 rating, which protects against dust ingress and splashes, making it suitable for typical workshop conditions. Which features support pipe wall thickness measurement specifically? A compact measuring cone (4 mm diameter) and a jaw length of 46 mm facilitate access to pipe interiors and thin walls for reliable thickness checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Precision Caliper Force Control 8N Two-Way, Swiss Digital 11mm Display, IP67, ISO 17025 - Microtech Metrology
Take advantage of the combination of robust industrial protection, precise 0.01 mm resolution and traceable ISO 17025 calibration for reliable quality control in every workshop; order the calibrated instrument via Metav Werkzeuge or contact the team for integration advice. Precision Caliper by Microtech Metrology — digital, wireless, IP67 The Precision Caliper is a digital measuring instrument designed for standard workshop and machine‑shop inspection tasks up to 150 mm, combining protected electronics and traceable calibration for dependable routine use. Digital display with 11 mm height Wireless data output for traceability IP67 protection for harsh environments ISO 17025 calibration with certificate Reliable measurement for everyday workshop use The caliper delivers 0.01 mm resolution, providing the fine gradation required for accurate pass/fail decisions in production and inspection. With a measurement range of 0–150 mm, the instrument fits the Standard class of calipers that balances reach and rigidity—ideal for common tasks in machine shops and metalworking. The clear Swiss Digital display (11 mm high) improves legibility on the shop floor and reduces reading errors, which shortens inspection cycles and increases throughput. Consistent contact force for repeatable results A bi‑directional measuring force of 8 N ensures a uniform contact pressure on the jaws, which reduces variation introduced by manual handling and improves repeatability between operators. Consistent force control translates into fewer reworks and more reliable quality data, as identical contact conditions produce comparable results across multiple measurements. Robust design suited to industrial environments Rated IP67, the caliper is dustproof and protected against temporary immersion, making it suitable for harsher production areas where coolant mist or particulate contamination can be an issue. The ruggedised electronics and sealed slider extend service intervals and reduce downtime, while the compact jaw geometry supports access to confined features without sacrificing stiffness. Traceable calibration and seamless data workflow Calibrated to ISO 17025 and supplied with a calibration certificate, the instrument supports formal quality systems and audit trails. The wireless data output enables direct transfer of measurement values into data collectors or SPC systems, cutting manual transcription and the risk of input errors. These features together create a more efficient measurement process and clearer documentation for quality records. Contact Metav Werkzeuge in Emmerich for technical advice and to request the ISO 17025 certificate for the Microtech Metrology precision caliper with wireless data output Technical data Article number: 141078192 GTIN: 4061905036514 Manufacturer: Microtech Metrology Facts Measurement range: 0–150 mm Resolution: 0.01 mm Display height: 11 mm Measuring force: 8 N Protection class: IP67 Special features Digital display (Swiss Digital) Wireless data output ISO 17025 calibration with certificate Jaw lengths: 40/16 mm FAQ Is the caliper delivered calibrated? Yes. The caliper is supplied with an ISO 17025 calibration certificate; the Microtech Metrology precision caliper is ready for traceable use on arrival. What accuracy can be expected at 150 mm? The instrument offers 0.01 mm display resolution; for a 150 mm range a typical digital caliper error band is in the order of ±0.03 mm, consistent with standard digital workshop calipers. Can measurement data be collected automatically? The wireless data output supports direct capture of values from the caliper into data logging and SPC workflows, enabling efficient digital documentation. Is the caliper suitable for wet or dusty environments? With an IP67 rating the caliper is dust tight and protected against immersion up to 1 m for a limited time, making it appropriate for many industrial shop conditions. Why is a defined measuring force important? A fixed 8 N measuring force reduces operator‑dependent variability. Consistent contact pressure improves repeatability and lowers the likelihood of measurement scatter. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Precision Caliper Force Control 8N Two‑Direction Digital, Swiss Display 11mm, IP67, ISO 17025 - Microtech Metrology
Benefit from laboratory-grade traceability and everyday robustness: the caliper combines ISO 17025 calibration with IP67 protection and a clear Swiss Digital 11 mm display for dependable workshop measurements; its controlled 8 N bidirectional measuring force and 0–150 mm range keep inspections fast and repeatable. Order the precision caliper directly via Metav Werkzeuge or ask our consultants if needed. Precision Caliper by Microtech Metrology — ISO 17025 calibrated, IP67, Swiss Digital (11 mm) A Precision Caliper designed for workshop and laboratory use with a 0–150 mm measuring range and controlled 8 N bidirectional measuring force for repeatable results ISO 17025 calibration included IP67 dust and water protection Swiss Digital 11 mm high-contrast display 0–150 mm workshop range with 8 N force Laboratory traceability meets workshop practicality This digital caliper is supplied fully ISO 17025 calibrated and includes a calibration certificate, which transfers laboratory traceability directly into routine quality checks. The delivered certificate documents measurement accuracy and supports audit trails, making the instrument suitable for regulated environments as well as the production floor. With a Swiss Digital readout and an 0.01 mm display resolution, the instrument provides the standard numerical clarity expected in assemblies and incoming inspection. Designed for reliable results in everyday measurement tasks Classified in the Standard range for calipers (0–150 mm), this instrument balances reach, stiffness and one-handed usability to suit general engineering and metalworking tasks. The IP67 rating reduces downtime from contaminants and coolant exposure, while the 8 N bidirectional measuring force keeps contact pressure consistent and reduces operator‑induced variation. Together these features improve repeatability and reduce the frequency of rejected parts during routine quality control. Clear readout and handling that speeds inspection A tall, high-contrast Swiss Digital display (11 mm) keeps readings legible across a range of lighting conditions, which accelerates inspection throughput and reduces transcription errors. The caliper’s jaw geometry (40/16 mm) offers secure contact for internal and external measurements without awkward handling. The combination of a controlled measuring force and a robust digital system supports reliable zeroing and quick switching between tasks, making this instrument a practical addition to production lines and measurement benches. For measurement tasks demanding lab-level evidence and workshop durability, contact Metav Werkzeuge to request the ISO 17025‑calibrated Microtech Metrology precision caliper and confirm suitability for specific applications Technical data Article number: 141078122 GTIN: 4061905036460 Manufacturer: Microtech Metrology ECLASS: 21170344 Core data Measuring range: 0–150 mm Display resolution: 0.01 mm Display height: 11 mm Measuring force: 8 N Protection class: IP 67 Digital readout: Swiss Digital Features ISO 17025 calibration included with certificate Bidirectional controlled measuring force Jaw length: 40/16 mm Digital instrument suitable for workshop and laboratory use FAQ Is a calibration certificate supplied with the caliper? Yes. The Microtech Metrology precision caliper is supplied fully calibrated to ISO 17025 and a calibration certificate is included with the instrument. What does IP67 protection mean for workshop use? IP67 indicates the caliper is dust-tight and protected against temporary immersion, reducing contamination risks from coolant or chips during metalworking. What measurement resolution and accuracy can be expected? The digital readout provides a resolution of 0.01 mm and a clear numeric display; the ISO 17025 calibration documents the instrument’s performance for traceable use. How does the 8 N measuring force affect results? A controlled 8 N bidirectional measuring force stabilises contact pressure, improving repeatability and lowering operator-induced measurement variance. Is this caliper suitable for precision laboratory tasks as well as shop floor work? Yes. With ISO 17025 calibration, a high‑contrast Swiss Digital display and IP67 protection, the instrument bridges laboratory traceability and robust shop-floor handling. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Precision Caliper Low Measuring Force, Swiss Digital Display 11mm, IP67 - Microtech Metrology
Benefit from precise, low‑force measurement and IP67 protection for reliable workshop results; take advantage of the clear Swiss digital readout and Standard 0–150 mm range — order the Precision Caliper directly via Metav Werkzeuge or ask our consultants if needed. Precision Caliper by Microtech Metrology — IP67, Swiss Digital 11 mm display The Precision Caliper is a digital measuring instrument designed for workshop and laboratory use, offering a 0–150 mm range and a low measuring force for sensitive components. High-contrast Swiss digital display 11 mm IP67-rated protection against dust and water Low measuring force (0.8 N) for delicate parts 0–150 mm standard measuring range Precision where it matters The instrument delivers repeatable results across its 0–150 mm span, placing it in the Standard class that balances reach and rigidity for most machine‑shop tasks. The combination of a clear Swiss digital display and a low measuring force (0.8 N) reduces operator influence on small or thin parts, which helps preserve tolerances during routine checks. As a digital measuring tool, it supports fast measurement cycles with unambiguous readings, making it suitable for quality control stations and assembly benches where throughput and reliability are required. Built for workshop conditions and easy reading Robustness is a practical benefit: the caliper is rated IP67, so temporary exposure to dust or water does not compromise the electronics, enabling use at workstations where coolant mist or chips are present. The 11 mm high Swiss display improves legibility under workshop lighting and reduces reading errors compared with smaller indicators. The sealed construction and solid display contribute to lower downtime for maintenance and fewer measurement interruptions in daily production workflows. Handling, application and operational advantages Designed for straightforward operation, the digital slider enables single‑handed measuring and quick repositioning. The combination of the Standard 0–150 mm range and the gentle contact pressure makes the instrument particularly well suited to metalworking, toolroom checks and inspection of delicate assemblies. Procurement through Metav benefits from a European quality filter and reliable logistics from the Emmerich warehouse, ensuring the caliper arrives ready for immediate use in the workshop environment. Contact Metav Werkzeuge for technical advice on the Microtech Metrology caliper or request supply directly from our Emmerich warehouse Technical data Article number: 141077153 GTIN: 4061905036477 Manufacturer: Microtech Metrology Eclass: 21170344 Digital display: Swiss Digital, 11 mm Key figures Measuring range: 0–150 mm Measuring force: 0.8 N Protection class: IP67 Digital: yes Features and applications Standard measuring range (classification: Standard) Low measuring force reduces deformation of delicate parts Dust‑ and water‑resistant design for workshop use High‑visibility Swiss digital display for unambiguous readings Intended for machine shops, toolrooms and quality control FAQ Is this caliper suitable for everyday workshop use? The Precision Caliper from Microtech Metrology is designed for workshop and laboratory environments; IP67 protection and a robust digital readout make it suitable for routine inspection tasks. What measuring range does the instrument cover? The instrument covers a 0–150 mm measuring range, matching the Standard class that combines reach and stiffness for typical machine‑shop requirements. Will the low measuring force affect measurement reliability? The 0.8 N contact pressure minimises deformation on thin or delicate parts while still providing consistent contact, which supports dependable comparative measurements in production. Is the display legible at a distance or under bright light? Yes. The caliper features a Swiss digital display with an 11 mm digit height, which improves readability and reduces the risk of transcription errors. Is a calibration certificate included with the caliper? The product data does not specify a supplied calibration certificate; if a formal certificate is required, please request clarification when ordering. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Precision Caliper Pocket 0.05mm Vernier, Matt Chrome Tool Steel, Four-Function, Locking Screw, Case - Metav IndustryLine
Take advantage of a compact, 150 mm vernier caliper that combines reliable 0.05 mm readability with durable tool steel construction; order the instrument directly via Metav Werkzeuge or request guidance from our consultants for workshop integration. Pocket Caliper M201.004 — 150 mm Vernier, 0.05 mm Resolution (Metav IndustryLine) A Pocket Caliper M201.004 for fast external, internal, depth and step measurements in general workshop and inspection tasks. 150 mm measuring range 0.05 mm vernier resolution Matt chrome, tool steel construction Locking screw for stable readings Accurate readings for everyday quality control The compact vernier caliper delivers repeatable measurements thanks to its classic analogue scale with a 0.05 mm resolution. As a standard-range instrument (best suited to everyday workshop tasks), it balances reach and stiffness for typical machine‑shop and metalworking checks. The vernier setup includes dual scales for fine reading and supports the familiar technique used across trades, so measurement procedures remain transparent and traceable without reliance on batteries or electronics. Designed for practical workshop use This pocket instrument is made from tool steel with a matt chrome finish that resists glare and hides light marks from daily handling. The integrated locking screw keeps jaws in position for transfer measurements and reduces read-off error during part handling. A compact jaw geometry (40 mm / 17 mm) provides access to narrow recesses while still offering stable contact faces for external and internal checks. The caliper’s analogue design removes dependence on power sources, making it a convenient companion for mobile inspection rounds. Four measuring functions reduce tool count Equipped for external, internal, depth and step measurements, this instrument consolidates multiple measuring tasks into a single tool, improving workflow efficiency and reducing tool changes. The vernier scale provides direct readings for each function; routine tasks such as checking bores, shafts and stepped shoulders can be completed without swapping instruments. A practical thread table printed on the reverse offers quick references for common threads, saving time in day‑to‑day inspection work. Reliable provenance and workshop support Produced to factory standard and supplied under the Metav IndustryLine label, this caliper suits foundries, maintenance shops and general machining environments that require straightforward, no‑frills accuracy. Metav’s position as a precision partner ensures easy access to a broad range of complementary measuring tools, while the product’s robust construction supports long service life with minimal upkeep. Maintenance is limited to keeping contact faces clean and occasional lubrication of the slide to preserve smooth, consistent movement. Contact Metav Werkzeuge for tailored advice on integrating the Pocket Caliper M201.004 into inspection routines; our Emmerich‑based specialists will assist with technical queries and supply options. Technical data Article number: M201.004 GTIN: 4054469100067 Tariff number: 90173000 Factory standard: Werksnorm Numbers / Core technical data Measuring range: 0–150 mm Resolution: 0.05 mm Vernier scales: upper 1/128; lower 1/20–39 mm Jaw length: 40 mm / 17 mm Designs / Special features Material: tool steel Finish: matt chrome Analogue vernier instrument Locking screw for fixing measurements Four measuring functions: external, internal, depth, step Thread table printed on reverse FAQ How precise is the Pocket Caliper M201.004 for routine checks? The Pocket Caliper M201.004 provides a 0.05 mm vernier resolution, making it suitable for standard workshop quality control and general machining inspections. Can this caliper measure both internal and external dimensions? Yes, the instrument supports external, internal, depth and step measurements, consolidating several tasks in one compact tool. What material and finish does the caliper have? The caliper is manufactured from tool steel with a matt chrome finish for enhanced durability and reduced surface glare. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Precision Caliper Pocket Analog 0.05mm Resolution Monoblock Satin Chrome Four-Function, Fixing Screw, DIN 862 - Metav IndustryLine
Take advantage of the pocket-sized robustness and clear Vernier readout for fast, repeatable checks in the workshop. The matt chrome, stainless steel monoblock design combines compact handling with durable measuring faces and a locking screw for consistent zeroing; order directly via Metav Werkzeuge or consult our specialists for application advice. M201.018 Pocket Caliper — 150 mm, matt chrome, stainless steel (Metav IndustryLine) A M201.018 pocket precision caliper for compact, everyday measurement tasks in machine and metalworking environments Pocket-size stainless steel caliper Matt chrome finish for low reflection Locking screw for repeatable measurements Compact design that speeds routine checks The M201.018 combines a compact footprint with a monoblock construction to deliver rigidity in a pocketable instrument. At a 150 mm range this caliper sits in the Standard class of workshop tools, offering the best balance between reach and stiffness for routine checks on components, fixtures and small assemblies. The matt chrome finish reduces glare under workshop lighting, easing read-off accuracy on the analogue scale and helping operators work faster without compromising measurement reliability. Clear Vernier readout and four measurement functions Equipped with a dual Vernier layout (top: 1/128", bottom: 1/20–39 mm), this analogue instrument gives unambiguous visual graduations for fine setting and verification. The design supports four measurement functions — external, internal, depth and step measurements — which reduces tool changes and shortens set-up time. A locking screw secures the slider for repeatable transfers, while a thread table printed on the reverse provides quick reference for common thread tasks. Compliance with DIN 862 standards ensures the scale and form factor meet established workshop tolerances. Suited to workshop use with practical features for machinists Made from stainless steel and finished for reduced surface reflections, the caliper is aimed at machinists, toolmakers and maintenance technicians who need reliable, analogue control without the complexity of electronic readouts. The fixed, robust jaws and the single-piece slider deliver stable measurement contacts, particularly useful when checking small bearings, shafts or turned parts. The built-in thread reference and compact size make this caliper a practical companion at the bench or in portable inspection kits, supporting efficient inspection routines and lowering interruption time during production. Choose the Metav IndustryLine M201.018 for compact, durable measuring where portability and reliable analogue readout matter most — contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M201.018 GTIN: 4054469100135 Brand: Metav IndustryLine Category: Calipers Facts Measuring range: 0–150 mm Resolution: 0.05 mm (Vernier) Nonius / Vernier: 1/128" top; 1/20–39 mm bottom Standard: DIN 862 Instrument type: analogue Four measurement functions: external, internal, depth, step Special features Material: stainless steel Finish: matt chrome Monoblock construction Locking screw for slider fixation Thread table on reverse side FAQ Is this caliper suitable for workshop measurements up to 150 mm? Yes. The M201.018 pocket caliper is specified for a 0–150 mm measuring range and is classified as a Standard caliper suitable for general machine‑ and metalworking tasks. What measurement functions does the caliper provide? The instrument supports four measurement functions: external, internal, depth and step measurements, allowing versatile use without additional gauges. How precise is the Vernier scale on this caliper? The Vernier arrangement gives a reading increment of 0.05 mm; the dual-scale layout (including the imperial 1/128" top scale) aids fine visual interpolation for workshop checks. Does the caliper include a locking mechanism? Yes. A locking screw is fitted to secure the slider and transfer measurements reliably between set‑up and check points. Is the instrument corrosion resistant for workshop environments? The caliper is manufactured from stainless steel and finished in matt chrome to reduce surface reflections and to provide practical resistance suited to general workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Precision Caliper Pocket With Locking Wheel, Matt Chrome, Four-Point Measurement, DIN 862, Inox Kist - Metav IndustryLine
Take advantage of a compact, stainless steel design combined with a reliable vernier to DIN 862 and a locking screw for consistent readings. Benefit from four-way measurement capability for interior, exterior, depth and step checks. Order the caliper directly via Metav Werkzeuge or request advice from our specialist consultants. Pocket Caliper M201.051 — 150 mm analogue vernier, inox matt chrome A Pocket Caliper M201.051 designed for quick, repeatable measurements in workshop, maintenance and inspection tasks Pocket-size 150 mm vernier caliper Stainless steel matt chrome finish Locking screw for repeatable readings Four-way measurement functionality Precise workshop measurements without electronics The vernier scale provides a robust, battery-free measuring system that complies with DIN 862, making it suitable for routine checks and assembly tasks where electronic aids are unnecessary. The analogue reading method is durable and immediately legible after a short familiarisation; the instrument supports four-way measurement for exterior, interior, depth and step readings, which reduces the need for multiple gauges. This characteristic keeps the workflow straightforward and helps maintain production pace while ensuring measurable repeatability. Solid stainless construction for everyday handling Constructed from stainless steel (inox) with a matt chrome finish, the caliper resists corrosion and stands up to workshop conditions. The compact 150 mm format belongs to the Standard size class, offering a practical balance between reach and stiffness for general metalworking and maintenance tasks. A locking screw secures the slider to preserve measurements during transfer or marking, enhancing reliability on the bench or at the machine. The small footprint and pocket-ready form factor support fast, on-the-move inspections. Practical additions that save time on the job Designed with practical use in mind, the instrument includes a thread table on the reverse side for quick reference during thread checks and a clearly graduated metric scale for straightforward interpretation. Being an analogue tool, it requires minimal upkeep: keep the measuring faces clean and free of debris, apply light lubrication to the slide occasionally and store the caliper dry. The mechanical design ensures consistent function without dependence on batteries, which simplifies long-term use and reduces downtime. Contact Metav Werkzeuge for procurement and technical advice on the Metav IndustryLine pocket caliper—request product information or a tailored quote via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M201.051 GTIN: 4054469100371 eClass: 21170344 Tariff code: 90173000 Facts Measuring range: 0–150 mm Standard: DIN 862 Analogue vernier scale Pocket-size format Special features Material: stainless steel (inox) Finish: matt chrome Locking screw for fixed readings Four-way measurement: exterior, interior, depth, step Thread table on the reverse side FAQ How suitable is this caliper for standard workshop measurements? The Pocket Caliper M201.051 is built to DIN 862 and is intended for standard workshop and maintenance tasks where a robust analogue instrument is preferred. Which measurement tasks can be performed with this instrument? Interior, exterior, depth and step measurements are all supported thanks to the four-way measurement design of the caliper. What material is the caliper made from and how durable is it? The caliper is made from stainless steel (inox) with a matt chrome finish, offering corrosion resistance and mechanical robustness for everyday use. Is calibration included with delivery? Calibration status is not specified for this item; the caliper conforms to DIN 862, and any specific calibration or certification requirements can be discussed with Metav Werkzeuge. How should the caliper be maintained to ensure long service life? Keep the measuring faces clean, avoid shocks, apply light lubrication to the slide when needed and store the instrument dry to preserve accuracy and function. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Precision Caliper With Concealed Rack, 0.02mm Vernier, Four-Function Measurement, Hardened Stainless Steel, Plastic Case - Metav IndustryLine
Combine fully hardened stainless steel construction with a concealed rack and a vernier resolution of 0.02 mm for repeatable, fine‑mechanical measurements; order the caliper directly via Metav Werkzeuge or consult the technical advisors for specification matching. Uhren-Messschieber M202.231 — Watchmaker caliper with concealed rack and 0.02 mm vernier The Uhren-Messschieber is a precision watchmaker caliper engineered for fine mechanical and micro‑assembly measurement tasks, offering a compact Standard range ideal for bench work and small components. Concealed rack, dust-resistant design Vernier accuracy 0.02 mm Four-way measurement functions Hardened stainless steel construction Compliant with DIN 862, incl case Precise measuring performance for micro and bench work Equipped with a mechanical vernier that reads to 0.02 mm, this instrument provides one of the finer analog resolutions available for mechanical calipers, meeting the expectations of watchmaking and precision assembly. The tool supports four-way measurement — external, internal, depth and step — enabling a single gauge to replace multiple items in a small workshop. Conformance with DIN 862 ensures the measuring method and scale layout are consistent with industrial practice, giving a clear technical basis for quality control and traceable comparison. Durable, workshop-ready construction for reproducible results The frame and jaws are manufactured from fully hardened stainless steel, which increases wear resistance and maintains jaw alignment under frequent use. A concealed rack reduces exposure to dust and swarf, extending service life and lowering maintenance needs while preserving measurement reliability. Practical details such as the printed thread chart on the reverse of the scale and the compact jaw lengths (40/30 mm) enhance handling and make repeated measurements less error‑prone in daily workshop routines. The caliper is supplied in a protective transport case to safeguard the instrument during storage and transit. Intuitive handling and clear data for efficient workflow As an analog precision caliper, the instrument combines tactile control with immediate numerical feedback from the vernier scale; this favours operators who prefer direct mechanical reading without electronic dependencies. Classified as a Standard range caliper (0–150 mm), it balances reach and stiffness, making it suitable for both watchmaking and general mechanical workshops that require reliable, repeatable results. For further technical clarification or to confirm fit‑for‑purpose within a metrology routine, the Metav technical team is available to advise on integration and calibration options. For specification matching or a detailed consultation about the Metav IndustryLine watchmaker caliper, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M202.231 GTIN: 4054469102399 Category: Messschieber Standard: DIN 862 Facts Measuring range: 0–150 mm Resolution / reading: 0.02 mm Jaw lengths: 40/30 mm Measuring functions: external, internal, depth, step Reading type: Analog vernier Special features Material: stainless steel, fully hardened Concealed rack for dust resistance Thread chart printed on reverse Supplied in a protective transport case Classified as Standard range caliper for workshop use FAQ What is the measuring range and resolution? The measuring range is 0–150 mm with a vernier reading of 0.02 mm; the Uhren-Messschieber M202.231 is therefore suitable for fine, repeatable measurements within that span. Can this caliper be used for internal and depth measurements? Yes — the instrument offers four measurement functions (external, internal, depth and step), making it versatile for both watchmaker and general bench applications. Is the caliper suitable for dusty workshop environments? The concealed rack design reduces dust ingress and mechanical contamination, improving longevity and maintaining measurement reproducibility under typical workshop conditions. Does the product comply with recognised standards? The caliper is manufactured to the conventions of DIN 862, which governs caliper scale layout and measurement practice. What accessories or documentation are included? Delivery includes the caliper, a protective transport case and a printed thread chart on the reverse of the scale; further calibration documentation is not indicated for this listing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Precision Caliper With Round Depth Gauge And Preset Function, USB, IP54 - Microtech Metrology
Take advantage of reliable 0–150 mm measurement, 0.01 mm resolution and a practical USB data output to speed up quality control and documentation. The combination of a clear 11 mm digit display, IP54 protection and a preset function ensures robust daily use and fewer measurement errors. Order the precision caliper directly via Metav Werkzeuge or contact our consultants for application advice. Precision Caliper 0–150 mm by Microtech Metrology — digital with USB and preset The Precision Caliper is a digital measuring instrument for workshop and quality-control tasks, offering a 0–150 mm range, USB data output and a round depth gauge for versatile measurements Digital display 0.01 mm resolution USB data output for traceable export IP54 protection for workshop environments Preset function with round depth gauge Consistent, measurable accuracy to reduce rework The caliper delivers a resolution of 0.01 mm and an accuracy of ±0.02 mm, values that support reliable pass/fail decisions in production. Resolution refers to the smallest display increment, while accuracy indicates the typical deviation from a true value; together they determine whether a measuring result is suitable for incoming inspection or assembly checks. The clear 11 mm digit height improves readability at the measuring station, reducing interpretation errors and accelerating repetitive checks. These measurable attributes make the instrument a practical choice for routine quality control. Built for the workshop — protected, robust and ergonomic Designed with an IP54 rating, the instrument is protected against dust ingress and splashing liquids commonly found in workshop environments. The caliper’s jaws (40/16 mm) and the round depth gauge extend measurement capability to recessed features and step depths, while the compact slider and balanced geometry support one‑hand operation. IP54 and the sturdy construction reduce downtime and the need for frequent replacements, which translates into steadier throughput for production lines and maintenance bays. Seamless data capture to speed documentation Equipped with USB data output, the instrument integrates easily into a traceability workflow: measurement results can be exported directly for statistical process control or stored in inspection reports. The preset function enables a defined zero or reference point to be set quickly, simplifying comparative measurements and batch checks. For workshops aiming to reduce transcription errors and speed up reporting, this direct data path offers a tangible productivity benefit. A standard length that suits most tasks in metalworking With a measuring range of 0–150 mm, this caliper falls into the Standard category — the workshop baseline that balances reach and stiffness for general machine‑shop and metalworking tasks. That range is ideal for component inspection, fixture setup and routine maintenance, providing the reach needed for typical parts while maintaining handling comfort. The instrument’s specifications and features suit metal‑working, quality control and general maintenance operations where dependable, repeatable measurement is required. For secure procurement and product matching, contact Metav Werkzeuge in Emmerich — Metav’s specialists will advise on application suitability and arrange supply of the Microtech Metrology precision caliper via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Type: Digital precision caliper Manufacturer: Microtech Metrology SKU: 141081112R GTIN: 4061905455575 Category: Digital caliper Facts Measuring range: 0–150 mm Resolution: 0.01 mm Accuracy: ±0.02 mm Display digit height: 11 mm Jaw length: 40/16 mm Protection class: IP54 Data output: USB Special features Preset function Round depth gauge Digital display Suitable for standard workshop and QA tasks FAQ What is the measuring range and suitability for workshop use? The instrument offers a measuring range of 0–150 mm, placing it in the Standard category for general machine‑shop, metalworking and quality‑control tasks. How precise are the measurements and what do the numbers mean? Resolution is 0.01 mm and typical accuracy is ±0.02 mm. Resolution is the smallest displayed step; accuracy describes the expected deviation from the true dimension under normal use. Can measurement results be exported for documentation? Yes, the caliper provides a USB data output to transfer measured values directly into inspection software or spreadsheets for traceability. What does IP54 protection cover in practical terms? IP54 indicates protection against dust ingress to a level that does not interfere with operation, and against water splashes from any direction — suitable for typical workshop conditions. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Precision Digital Caliper 0.01/0.005mm Resolution, IP67, ISO 17025 Calibration - Microtech Metrology
Take advantage of a compact, inspection-ready measuring instrument that combines shop‑grade reach with laboratory traceability: a calibrated digital tool with ISO 17025 certificate, IP67 protection and a clear 9 mm display for fast readings. Order directly via Metav Werkzeuge or contact our consultants for application advice. Precision Caliper by Microtech Metrology — Digital, IP67, 0–150 mm The Precision Caliper is a digital measuring instrument for workshop and quality control tasks, offering a standard 0–150 mm range with depth‑measurement capability and a sealed construction suitable for industrial environments. IP67 dust and water protection ISO 17025 calibration certificate included 0–150 mm range for standard workshop use 0.01 mm resolution with 9 mm digital display Reliable measurement performance for quality control Designed for routine inspection and production control, this precision caliper delivers a 0–150 mm measuring range that matches common workshop requirements while maintaining compact handling. With a 0.01 mm resolution and a stated accuracy of ±0.02 mm, the instrument supports repeatable pass/fail checks and dimensional documentation. The large 9 mm display speeds up read‑out and reduces transcription errors, which contributes directly to shorter inspection cycles and fewer downstream rejects. Robust design that keeps workshops running Sealed electronics and an IP67 rating mean the instrument tolerates dust and temporary immersion, so measurement tasks remain possible in damp or oily conditions without immediate risk to the electronics. The caliper includes a dedicated depth measurement function for grooves and recesses, extending usefulness beyond simple internal and external checks. Together, these features reduce interruptions caused by instrument failure and lower the likelihood of measurement‑related rework. Traceability and audit readiness from delivery This digital instrument is supplied fully calibrated under ISO 17025, and a calibration certificate is included with delivery, providing documented traceability for quality management systems and external audits. The combination of laboratory calibration and workshop robustness means the tool is ready for immediate use in inspection plans, supplier checks or incoming goods control, reducing the preparatory effort before first use. Practical applications and operational benefits Ideal for machine shops, metalworking and quality departments, the caliper is suitable for routine dimensional checks, set‑up verification and small assembly control tasks. Its balance of stiffness and reach covers most daily measurement needs while remaining easy to handle for one‑person operation. The sealed display and clear digits also support faster training of operators, helping teams maintain throughput with consistent measurement quality. Contact Metav Werkzeuge today to secure a calibrated Microtech Metrology digital caliper with ISO 17025 certificate and expert advice on integration into inspection routines Technical Data Article number: 141085102 GTIN: 4061905451478 Manufacturer: Microtech Metrology Eclass: 21170344 Facts Measuring range: 0–150 mm Resolution: 0.01 mm Display digit height: 9 mm Accuracy: ±0.02 mm Protection rating: IP67 Digital display: yes Measuring functions: depth measurement Special features ISO 17025 calibration certificate included Standard workshop category (100–300 mm) Depth measurement capability Sealed electronics for harsh environments FAQ Is the caliper delivered calibrated? Yes. The instrument is supplied fully calibrated and includes an ISO 17025 calibration certificate as standard. What accuracy and resolution can be expected? The digital caliper offers 0.01 mm resolution with an overall accuracy of approximately ±0.02 mm, suitable for routine industrial quality checks. Can the caliper be used in wet or dusty conditions? The IP67 rating means the caliper is protected against dust ingress and temporary immersion, allowing use in many demanding workshop environments. Does the instrument measure depths and steps? Yes. The tool features a dedicated depth measurement function in addition to internal and external jaws for versatile inspections. Is this caliper suitable for incoming goods inspection and audits? Yes. Delivery includes an ISO 17025 calibration certificate, making it suitable for audit‑traceable inspection processes. Which brand manufactures this instrument? The caliper is produced by Microtech Metrology, a supplier of precision measuring instruments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Precision Digital Caliper Colour Touchscreen, IP54, ISO 17025 Calibrated - Microtech Metrology
Benefit from traceable, workshop-ready measurement: ISO 17025 calibration with certificate, ±0.008 mm accuracy and wireless data transfer for faster logging; order the instrument directly via Metav Werkzeuge or consult our specialists for integration advice. Built‑in digital caliper – Microcomputer control, IP54 protection and 1.54" colour touchscreen (Microtech Metrology) The Built‑in digital caliper is a compact, workshop‑grade measuring instrument designed for standard machinist and quality‑control tasks with a measuring range of 0–150 mm. Colour 1.54" touchscreen display Wireless and USB data output High accuracy ±0.008 mm Stainless steel construction, IP54 Precise, certified measurements that fit everyday inspection The instrument delivers a high level of measurement certainty thanks to a resolution 0.001 mm and accuracy ±0.008 mm, making it suitable for demanding production checks. Classified as Standard range (measuring range 0–150 mm), this caliper offers the balance between reach and rigidity that most workshop routines require. Delivered fully calibrated, the device includes an ISO 17025 calibration certificate, extending traceability and simplifying quality documentation for audit‑ready production. Faster data flow and fewer transcription errors Equipped with Wireless and USB data outputs and a colour 1.54" touchscreen, the caliper supports direct digital capture and quick inspection reporting. Integration into digital logs or SPC workflows reduces manual entry and speeds up routine checks—an efficiency gain that lowers cycle times and improves traceability. The touchscreen interface simplifies configuration and readout, while the combined data ports ensure compatibility with a wide range of measurement systems. Robust build for the workshop environment Constructed from stainless steel and rated IP54, the unit resists dust and splashes common in production areas and is built for repeated handling. The built‑in design is suitable for integration into measurement fixtures or compact stations where a flush or embedded installation is preferred. This durability, together with the practical protection rating, reduces downtime and preserves calibration intervals, helping maintain consistent measurement results over time. Contact Metav Werkzeuge for technical integration support and to request the full technical datasheet for the Microtech Metrology built‑in digital caliper (Article No. 142501141) with ISO 17025 calibration Technical Data Article number: 142501141 GTIN: 4061905036996 Brand: Microtech Metrology Display: Colour 1.54" touchscreen Data output: Wireless + USB Measuring range: 0–150 mm Material: stainless steel Calibration: ISO 17025 certificate included Protection: IP54 Facts Accuracy: ±0.008 mm Resolution: 0.001 mm Measuring range: 0–150 mm Display size: 1.54" Protection class: IP54 Special features Built‑in design for integration Colour touchscreen interface Wireless and USB data output Stainless steel construction Delivered calibrated to ISO 17025 FAQ Is the caliper supplied with a calibration certificate? Yes. The Microtech Metrology built‑in digital caliper (Article No. 142501141) is delivered fully calibrated and includes an ISO 17025 calibration certificate. What measuring range and accuracy does the instrument offer? The instrument covers 0–150 mm and provides an accuracy of ±0.008 mm with a resolution of 0.001 mm. How can measurement data be exported from the caliper? Measurement data can be transferred via Wireless or USB output, enabling direct logging into inspection software or data collection systems. Is the caliper suitable for everyday shop use? Yes. Its stainless steel construction and IP54 rating make the caliper robust against dust and splashes typically encountered in workshop environments. Can the unit be integrated into a measurement station or fixture? The built‑in design is intended for integration into fixtures and compact stations, allowing installation where a flush or embedded caliper is required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Precision Digital Caliper With Ceramic Interchangeable Insert, Preset, Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of the combination of compact 150 mm measuring range, ceramic measuring insert and flexible probe mounting for precise, repeatable inspection results; order directly via Metav Werkzeuge or consult the technical team for application advice. Digital Uni caliper 150 mm x 40 mm — Digital caliper with ceramic insert and M2.5 probe thread by Metav IndustryLine The Digital Uni caliper 150 mm x 40 mm is a compact digital precision caliper for general workshop inspection and quality control, featuring a ceramic insert with preset and a through-thread for interchangeable measuring tips. *Digital display with SET/PRESET button *M2.5 through-thread for probe inserts *Ceramic measuring insert for wear resistance *Standard 0–150 mm range for workshop use Precise, measurable results for routine inspections The instrument combines a 150 mm measuring range with a high-contrast digital display and 0.01 mm resolution, delivering measurable improvements in inspection repeatability compared with coarse mechanical gauges. The specified measurement tolerance of ±0.04 mm positions this tool within reliable workshop accuracy for assembly checks and component verification. The hardened stainless steel construction with metal housing resists wear and maintains jaw alignment, which reduces systematic error over frequent use and supports consistent quality control. Flexible probe options for specialised tasks A through-thread with M2.5 specification accepts interchangeable measuring inserts, making the caliper adaptable to restricted or contoured measuring points. The device includes two 2 mm ball measuring heads and a ceramic insert with preset, which provides a wear-resistant contact surface and fast setup for repeat measurements. This modular approach reduces downtime for fixture changes and extends the usable life of the instrument by allowing targeted replacement of wear parts rather than the entire gauge. Data handling, workshop integration and practical design Equipped with an RB 5 data output, the caliper supports straightforward integration into measurement logging workflows and avoids manual transcription errors during batch inspections. The digital unit features an ON/OFF and SET/PRESET interface for quick zeroing and reference capture, and runs on a standard 3 V supply for ease of maintenance. With a compact jaw length and a balanced weight, the tool is classified as Standard for calipers (suitable for the everyday needs of machine shops and metalworking), offering the best compromise between reach, stiffness and one-handed handling for 150/200/300 mm baseline tooling. For dependable workshop precision from Metav IndustryLine, request a detailed specification or application consultation from Metav Werkzeuge — technical advice and secure delivery are available from Emmerich. Technical Data SKU: M240.205.N GTIN: 4054469159997 TARIC: 90173000 Facts Measuring range: 0–150 mm Resolution: 0.01 mm Accuracy: ±0.04 mm Weight: 0.48 kg Jaw length: 45 mm Power supply: 3 V Special features Stainless, hardened steel with metal housing Ceramic measuring insert with preset Through-thread M2.5 for interchangeable probes Includes two 2 mm ball measuring heads Digital display with ON/OFF and SET/PRESET Data output: RB 5 FAQ Is this caliper suitable for general workshop measurement tasks? The Digital Uni caliper 150 mm x 40 mm (Metav IndustryLine, SKU M240.205.N) is designed for standard workshop and machine‑shop inspection, offering a practical balance of reach and stiffness for everyday use. Can the measuring probes be replaced for special applications? Yes. The tool features an M2.5 through-thread and is supplied with two 2 mm ball measuring heads; additional probes with compatible M2.5 mounting can be fitted for specialised measurements. What level of accuracy and resolution can be expected? The caliper provides a resolution of 0.01 mm and a specified accuracy of ±0.04 mm, which is appropriate for routine quality checks and part inspections in mechanical workshops. Does the instrument support data logging? The caliper includes an RB 5 data output for connection to data collection systems, enabling direct transfer of measurement values for documentation and process control. Is the ceramic insert intended for heavy-duty use? The ceramic measuring insert offers improved wear resistance and stable contact for repeated measurements; it is particularly useful where metallic contact surfaces would otherwise degrade faster. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Precision Digital Caliper With Preset Function, IP54 Protection, 11mm Digit Height USB Output - Microtech Metrology
Benefit from workshop‑ready durability and precise repeatability: the combination of IP54 protection, PRESET function and USB data output keeps production checks fast and traceable. Order directly via Metav Werkzeuge or contact our consultants for advice and compatibility information. Precision Caliper (digital) with IP54, PRESET — Microtech Metrology The Precision Caliper is a digital workshop caliper for routine dimensional checks up to 150 mm, offering splash‑resistant IP54 protection and a PRESET function for consistent reference settings. Digital display with 11 mm digit height IP54 splash and dust protection PRESET function for repeatable references USB data output for traceable readings Robust protection for everyday measuring reliability Equipped with IP54 enclosure sealing, this digital measuring instrument tolerates workshop dust and occasional splashes while maintaining stable readings. The instrument is designed for the Standard measuring category, covering a measuring range of 150 mm that balances reach and rigidity for typical machine‑shop tasks. With an indicated accuracy of ±0.02 mm, the device delivers industry‑grade repeatability; the display resolution of 0.01 mm supports fine readouts without the complexity of submicron instruments. This combination reduces rework and increases throughput in routine inspection and setup operations. Fast data capture and repeatable setups to support quality control The integrated PRESET function simplifies changeovers by letting operators store a reference dimension for repeated checks, reducing setup time and human error. Measurements can be exported via USB for documentation and process traceability, which supports batch reporting and digital quality records. The clear 11 mm high digits on the digital display make values easy to read across a busy bench, and the standard electronic interface is compatible with common data‑logging workflows. The Precision Caliper therefore combines operational convenience with measurable control over quality processes. Practical features that improve shop performance Designed for general workshop and maintenance work, the caliper includes an integrated depth gauge for step and recess measurements and a robust slider for confident two‑hand operation when required. Construction and function focus on user efficiency: straightforward button layout, quick PRESET access and a stable measuring carriage to limit parallax or play. As a product from Microtech Metrology, it suits production, inspection and toolroom environments where dependable, documentable measurements are required without investing in laboratory‑only instruments. For traceable, workshop‑grade measuring with Microtech Metrology’s PRESET‑equipped digital caliper, contact Metav Werkzeuge in Emmerich for tailored advice or to confirm compatibility with existing data systems — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 141081112 GTIN: 4061905454592 ECLASS: 21170344 Manufacturer: Microtech Metrology Facts Measuring range: 0–150 mm Resolution: 0.01 mm Accuracy: ±0.02 mm Digit height: 11 mm Special features IP54 protection PRESET function Data output: USB Digital display: yes Depth gauge: integrated Type: digital caliper Measurement class: Standard (up to 150 mm) FAQ What measuring range does this caliper cover? The caliper covers a measuring range of 0–150 mm and is classified as a Standard workshop caliper suitable for general machine‑shop use. How precise are the readings from this instrument? Readings are provided with a resolution of 0.01 mm and an indicated accuracy of ±0.02 mm on the Microtech Metrology digital caliper (SKU 141081112). Does the caliper support data export for documentation? Yes. The instrument features a USB data output for direct transfer of measured values into inspection records or data‑logging systems. What is the benefit of the PRESET function? The PRESET function allows a stored reference to be recalled for repeat measurements, improving repeatability and reducing setup time during serial checks. Is the caliper suitable for shopfloor use? With IP54 protection and a sturdy slider, the caliper is designed for shopfloor conditions, where dust and occasional splashes occur. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Precision Pocket Caliper 0.02mm Resolution Round Jaws, Depth Rod 2.0mm, Matt Chrome, Four-Function - Metav IndustryLine
Take advantage of a compact, workshop-ready caliper that combines 150 mm measuring range, 0.02 mm resolution and robust matt-chrome stainless construction for reliable everyday checks; order or request advice via Metav Werkzeuge for a tailored supply solution. Pocket Caliper M201.013 (150 mm, 0.02 mm resolution) — Metav IndustryLine A Pocket Caliper M201.013 built for precise, compact measurements in machine shops and field use, featuring a round depth rod and matt-chrome stainless finish. Compact 150 mm measuring range 0.02 mm resolution nonius scale Four-way measurement capability Matt-chrome stainless construction Precision that fits the workshop This compact caliper is classified in the standard measuring range and is optimised for everyday tasks in machine and metal workshops. The mechanical nonius delivers a 0.02 mm reading step, offering a balance between readability and robustness for production checks and quality control. Conforming to DIN 862, the instrument is suitable where a reliable analogue reference is required and where repeatable manual measurements are part of routine inspection procedures. The four measurement modes (external, internal, depth and step) extend utility without adding bulk. Robust, portable design for repeatable checks A matt-chrome finish over stainless steel gives the caliper corrosion resistance and a professional feel while keeping weight and size suitable for pocket carry. The round depth rod (2.0 mm) and jaw geometry with 40/17 mm tip lengths allow access to shallow recesses and narrow grooves. The integrated lock screw secures the slide for transfer measurements, and a thread table on the reverse side supports quick reference for common thread pitches. The mechanical design requires no batteries, which simplifies maintenance and ensures readiness in harsher shop environments. Practical benefits and typical applications Thanks to its compact footprint and four-way measurement capability, the instrument works well for setup tasks, quick in-process checks and small-series inspections where portability and speed are priorities. The analogue scale provides immediate tactile feedback, useful when a steady hand and straightforward interpretation are preferred over electronic systems. Ideal applications include general workshop measuring, toolroom checks, and on-site verification of assembled parts. The combination of a hardened measuring system and matt-chrome corrosion protection supports long service life under normal workshop use. For precise, portable measuring from a trusted supplier, choose the Metav IndustryLine Pocket Caliper M201.013 — contact Metav Werkzeuge for advice or to arrange delivery from Emmerich. Technical Data SKU: M201.013 GTIN: 4054469163963 Eclass: 21170344 Customs tariff number: 90173000 Material: stainless steel (inox) Finish: matt-chrome plated Standard: DIN 862 Numbers / Core technical data Measuring range: 0–150 mm Resolution: 0.02 mm Jaw tip lengths: 40 / 17 mm Depth rod diameter: 2.0 mm Special features / Versions Four-way measurement: external, internal, depth, step Mechanical nonius scale Lock screw for secure measurement transfer Thread table on reverse side Pocket-sized, portable design FAQ How accurate is the caliper for everyday shop work? The Pocket Caliper M201.013 provides a 0.02 mm resolution on an analogue nonius and complies with DIN 862, making it suitable for standard workshop accuracy and routine inspection tasks. Which measurements can be performed with this caliper? The instrument supports four functions: external, internal, depth and step measurements, enabling versatile use across setup, inspection and assembly checks. Does the caliper require batteries or electronics? No. The M201.013 is a fully mechanical caliper with a nonius scale, so it operates without batteries and is ready for immediate use. What material is the caliper made from and how is it protected? The caliper is manufactured from stainless steel with a matt-chrome plated finish to improve corrosion resistance and durability in workshop environments. Is there a quick reference for thread pitches on the tool? Yes. A thread table is printed on the reverse side of the caliper to facilitate rapid identification of common pitches during inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Precision Pocket Caliper 0.02mm Resolution, Monoblock Matte Chrome Moment Lock, Four-Point Measuring, Inox, DIN 862 - Metav IndustryLine
Take advantage of a compact, DIN‑compliant measuring tool that combines 0.02 mm vernier resolution with a moment lock for reproducible pressure and consistent readings; order directly via Metav Werkzeuge or contact our consultants for application advice. Pocket Caliper M201.045 — 150 mm, 0.02 mm vernier, matt chrome (Metav IndustryLine) The Pocket Caliper M201.045 is a compact, analogue vernier caliper designed for reliable workshop measurement, offering quick inside, outside, depth and step checks for machining and maintenance tasks. Compact 150 mm measuring range 0.02 mm vernier resolution Moment lock for reproducible contact force Four-way measurement capability Consistent, measurable precision for everyday work The Pocket Caliper M201.045 offers 0.02 mm vernier resolution and is manufactured to DIN 862 standards, providing stable, repeatable results for routine quality checks and setup tasks. The integrated moment lock prevents variation in contact pressure, which reduces operator-induced error and improves batch-to-batch comparability. The analogue vernier layout includes an auxiliary inch scale and a clearly graduated metric scale, making the instrument suitable where straightforward, mechanically robust measurement is required. This combination delivers a measurable improvement in process reliability without added electronic complexity. Compact design that supports efficient handling With a 150 mm range in a pocketable format and a monoblock slide, the instrument stays rigid during single‑hand operation and when measuring awkward positions. The stainless steel body with matt chrome finish resists corrosion and reduces glare in bright workshop lighting, while the concise jaw geometry (40/17 mm) helps to reach into small features. The caliper also provides depth measurement via the integral depth rod, keeping multiple basic measurement functions consolidated in one lightweight tool for fast, practical use at the bench or on site. Built for the workshop: classification and applications Classified in the Standard range (100–300 mm), this caliper suits general machine‑shop and metalwork tasks where a balanced combination of reach and stiffness is essential. Its four‑way measurement capability supports internal, external, depth and step measurements without equipment changes, simplifying inspection routines. A thread reference table on the reverse side assists with common fastener checks, saving time when comparing measured pitches. Robust analogue operation makes the tool particularly appropriate for workshops that prioritise durability and ease of service. Practical delivery, upkeep and serviceability The caliper is supplied in a protective transport case to prevent damage during storage and transit, and the monoblock construction minimises play over time. Routine care is straightforward: keep the slide clean, apply a light corrosion‑inhibiting oil to moving parts, and use the moment lock to avoid undue wear from excessive clamping. The simple mechanical design keeps long‑term maintenance low while ensuring the caliper remains a dependable instrument in daily production and inspection workflows. Metav IndustryLine supports this tool with the supply reliability and quality oversight expected by European workshops. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine Pocket Caliper M201.045 into production or inspection routines; our Emmerich team can recommend suitable measurement procedures and delivery options. Technical data SKU: M201.045 GTIN: 4054469100326 eClass: 21170344 Norm: DIN 862 Core measurements Measuring range: 0–150 mm Maximum measuring range: 150 mm Resolution: 0.02 mm (vernier) Vernier with auxiliary inch scale Four‑way measurement: internal, external, depth, step Depth measurement included Zolltarifnummer: 90173000 Design & special features Material: inox (stainless steel) Finish: matt chrome Monoblock slide construction Moment lock (momentfestellung) Thread table on reverse side Supplied in transport case FAQ What types of measurement can be performed with this caliper? The Pocket Caliper M201.045 performs internal, external, depth and step measurements thanks to its four‑way measurement design, enabling a wide range of workshop checks. Is the instrument compliant with recognised standards? Yes, the caliper is manufactured to DIN 862, ensuring common industrial expectations for mechanical caliper performance are met. Is the caliper delivered ready for safe transport? The caliper is supplied in a protective transport case to prevent damage during storage and transit and to simplify safe handling on the shop floor. Is this caliper intended for precision laboratory work or general workshop use? This instrument is classified in the Standard range (100–300 mm), making it ideal for machine‑shop and metalwork applications where balanced reach and stiffness are required rather than submicron laboratory tasks. Does the caliper include a reference for thread measurements? Yes, a thread table on the reverse side provides quick reference data for common fastener checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Taschen-Messschieber, Momentverstellung, Werksnorm - Metav IndustryLine
Die besonders positiven Bewertungen von Metav Werkzeuge stehen für viele loyale Kunden. Finde es selbst heraus und bestelle bei metav-shop.de! HIGHLIGHTS für 150mm Taschen-Messschieber Messbereich: bis 150mm Material: werkzeugstahl 150mm - Bereich für klare Ergebnisse Mit von 0 – 150mm decken den Bedarf im Tagesgeschäft zuverlässig ab. Flächen, Kanten und Abschnitte lassen sich sicher ansteuern, auch bei wechselnden Geometrien. Der Bereich unterstützt strukturierte Abläufe im Maschinen- und Metallbau und hält Reserven für Sonderfälle bereit. Gleichmäßige Messfolgen bringen Ruhe in die Fertigung. So bleibt Präzision planbar – vom ersten Griff bis zur Freigabe. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber.. Dieses Messwerkzeug vereint gleich vier präzise Messfunktionen in einem einzigen Gerät: Außen-, Innen-, Tiefen- und Stufenmessung. Dank sorgfältig ausgeführter Messflächen und einer integrierten Tiefenmessstange entfällt das Wechseln von Werkzeugen. Im Gegensatz dazu beherrschen viele Standard-Messschieber nur drei Messarten – und die Stufenmessung gelingt nur bei exakt plan bearbeiteten Stirnflächen. Das sind die 4 Mess-Modi: Außenmessung: Außendurchmesser, Breite, Dicke von Werkstücken mit den großen Messschnäbeln Innenmessung: Innendurchmesser von Bohrungen, Nuten, Rohren – gemessen mit den oberen, kleineren Kreuzschnäbeln Tiefenmessung: Tiefe von Sacklöchern, Nuten oder Abständen bis zu einer Grundfläche – mittels ausfahrender Tiefenmessstange am Schieberende Stufen- oder Absatzmessung: Höhe bzw. Versatz zwischen zwei Ebenen (Absatz an Dreh-/Frästeilen, Bundhöhe, Schrittmaß an Gehäusen) – gemessen über die rechtwinklig geschliffenen Stirnseiten von Schiene und Schieber Ausführung Werksnorm Verlassen Sie sich auf Präzision, die weltweit Standards setzt: Unser Metav IndustryLine Taschen-Messschieber erfüllt die Anforderungen der Werksnorm in jedem Detail – von der Materialauswahl über die Fertigung bis hin zur Kalibrierung. Damit garantieren wir exakte Messergebnisse, internationale Zertifikate und höchste Akzeptanz bei Audits und Kundenabnahmen. Qualität, der Sie vertrauen können. Die Premium Messwerkzeuge von Metav IndustryLine werden von unseren Profis für Messwerkzeuge empfohlen. Metav IndustryLine steht für Premium Messwerkzeuge zu einem erstklassigen Preis. Alle Messwerkzeuge werden nach der Produktion gestestet. Benutzung als Einstelllehre Dieser Messschieber ist mit einer Momentverstellung ausgestattet. Im Schieber sitzt eine kleine Friktions-Kupplung, die mit einem definierten Drehmoment arbeitet: Beim Messen gleitet der Schieber weich, hält aber nach dem Loslassen selbstständig in Position. Auf diese Weise lassen sich reproduzierbare Ergebnisse einfach und zügig erreichen. Mit Gewindetabelle auf der Rückseite des Messschiebers Die kleine Gewindetabelle auf der Rückseite vieler Messschieber ist ein Spickzettel für den Gewinde- und Bohrungsalltag: Sie verrät für gängige Schraubengrößen sofort Steigung, Kerndurchmesser (Kerndloch) und den passenden Bohrerdurchmesser. Damit spart man das Blättern in Tabellenbüchern, vermeidet Rechenfehler und hat alle Daten genau dort, wo man sowieso misst. Detailspezifikationen für den Taschen-Messschieber von Metav IndustryLine: Bestellnummer: M201.016 Messbereich: 0-150mm Marke: Metav IndustryLine Bezeichnung: Taschen-Messschieber Ausführung: analog Gewicht: 0,2kg Material: werkzeugstahl Lieferung im Kasten Norm: Werksnorm Schnabellänge: 40/17mm Nonius: 1/1000" Oben und 1/50-49 mm Unten für 4-fach Messung mit Gewindetabelle auf der Rückseite mit Momentverstellung Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Erwägungen beim Beschaffen eines Messschiebers: Zusatzfunktionen wie Datenausgangsoptionen oder die Regelung der Messkraft sind neben der Genauigkeit und dem Messbereich essenziell. Messschieber mit spezifizierter Messkraft bietet insbesondere bei Qualitätssicherungsprozessen und in laboratory setups Vorteile. Außerdem sollte man untersuchen, ob ein kalibrierter Messschieber sinnvoll ist. Eine Kalibrierung kann direkt nach Lieferung vorgenommen werden und sollte zur Sicherung der Prozessqualität jedes Jahr erneuert werden. Pflegehinweis - damit Sie lange etwas von Ihrem Messwerkzeug von Metav IndustryLine haben: Taschen-Messschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
150–300mm Digitaler Präzisionsmessschieber, 0,01mm Auflösung, Wireless Daten, ISO 17025 Kalibrierzertifikat, handgefertigte Messbacken - Microtech Metrology
Der Präzisionsmessschieber verbindet hohe Auflösung, wireless Datenausgabe und ISO 17025 Kalibrierung zu einem zuverlässigen Messmittel für Fertigung und Labor. Nutzen Sie die Kombination aus Auflösung 0,01 mm und nachweislicher Kalibrierung für reproduzierbare Prüfabläufe; Metav Werkzeuge liefert und berät bei Bedarf direkt weiter. Präzisionsmessschieber von Microtech Metrology Der Präzisionsmessschieber ist eine digitale Schieblehre für präzise Werkstatt‑ und Qualitätskontrollen bis 300 mm. Präzisionsmessschieber »141072392C« von Microtech Metrology Digitalanzeige, Displayhöhe 11 mm Auflösung 0,01 mm, Fehlergrenze ±0,03 mm wireless Datenausgang für Datenübertragung Handgefertigte Messbacken und Tiefenmaß Höchste Präzision mit nachweisbarer Kalibrierung Mit einer Auflösung von 0,01 mm und der Einordnung in den digitalen Industriestandard bietet dieses Messwerkzeug zuverlässige Messwerte für Serienprüfungen. Die Kalibrierung erfolgt nach ISO 17025 und das Gerät wird mit einem Kalibrierzeugnis ausgeliefert, sodass Messunsicherheit dokumentiert und Prüfprozesse auditfähig bleiben. Diese Kombination reduziert Nachmessungen und erhöht die Prozesssicherheit in der Fertigung. Robustheit und Messkomfort für den Werkstattalltag Die handgefertigten Messbacken und die präzise geführte Schiene sorgen für lange Standzeit und geringe Messabweichungen bei wiederholten Messungen. Das integrierte Tiefenmaß erweitert die Einsatzmöglichkeiten über reine Außen‑ und Innenmessung hinaus. Die angegebene Schnabellänge 60/21 unterstützt das sichere Ansetzen an Bauteilen mit begrenztem Freiraum, ohne auf Stabilität zu verzichten. Geeignet für Maschinenbau, Qualitätskontrolle und Werkstatt Als Standard‑Kategorie mit einem Messbereich bis 300 mm deckt dieses Messgerät typische Anwendungen im Maschinen‑ und Metallbau ab. Die Länge bietet ein ausgewogenes Verhältnis aus Reichweite und Steifigkeit, ideal für Bauteile, Spannmittel und Serienteile. Anwender profitieren von konsistenten Ergebnissen bei Prüfplänen und Werkstattmessungen. Integration in digitale Abläufe und einfache Ablesbarkeit Die Digitalanzeige mit einer Höhe von 11 mm sorgt für schnelle, sichere Ablesung auch bei feinen Teileschreibungen. Der wireless Datenausgang ermöglicht die direkte Übertragung in Prüfsoftware oder Messdatenerfassungssysteme und erleichtert so die Datendokumentation im Sinne von Industrie 4.0. Dadurch lassen sich Messprotokolle automatisieren und Fehlerquellen durch manuelle Übertragung vermeiden. Für verlässliche Serienmessungen empfiehlt sich der Erwerb des Präzisionsmessschiebers von Microtech Metrology über Metav Werkzeuge; bei fachlichen Fragen steht die Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 zur Verfügung Produktmerkmale Artikelnummer: 141072392C Marke: Microtech Metrology Bezeichnung: Präzisionsmessschieber GTIN: 4061905200663 Fakten Messbereich: 0-300 mm Auflösung: 0,01 mm Displayhöhe: 11 mm Ablesung: 0,01 Besonderheiten Datenausgang: wireless (für Datenübertragung) Handgefertigte Messbacken Tiefenmaß Digitalanzeige ISO 17025 Kalibrierung: Kalibrierzeugnis mitgeliefert Messflächen: vorhanden Schnabellänge: 60/21 FAQ Welche Auflösung hat das Messgerät und wie genau ist es? Der Präzisionsmessschieber von Microtech Metrology bietet eine Auflösung von 0,01 mm; für den Messbereich bis 300 mm ist eine Fehlergrenze von etwa ±0,03 mm typisch, was ihn für Standard‑Qualitätskontrollen im Maschinenbau qualifiziert. Wird das Gerät kalibriert geliefert? Ja, der Präzisionsmessschieber wird vollständig kalibriert geliefert und enthält ein ISO 17025 konformes Kalibrierzeugnis, sodass die Prüfmittelverwaltung sofort dokumentierbare Werte erhält. Wie werden Messergebnisse übertragen? Die Schieblehre verfügt über einen wireless Datenausgang, der eine direkte Übertragung von Messwerten in Datenlogger oder Prüfsoftware ermöglicht und so manuelle Übertragungsfehler minimiert. Für welche Anwendungen eignet sich das Messwerkzeug besonders? Das Instrument ist ideal für Werkstatt‑ und Fertigungs‑Kontrollen, Serienprüfungen im Maschinenbau und für die Qualitätskontrolle von Präzisionsteilen bis 300 mm, dank robuster Bauweise und präziser Messbacken. Welche Vorteile bieten die handgefertigten Messbacken? Handgefertigte Messbacken sorgen für exakte Anlegeflächen und längere Standzeit bei wiederholten Messungen, was die Reproduzierbarkeit von Messwerten in Fertigungsprozessen verbessert. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
1520mm Digital Precision Caliper For Bore Spacing With Colour Display, IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a long measuring range, reliable workshop protection and full traceability: this caliper combines 1,520 mm reach, Wireless + USB data transfer and ISO 17025 calibration for reproducible results in heavy machining. Order the tool through Metav Werkzeuge or consult our specialists for application and delivery options. Microtech digital caliper — long-range, Wireless + USB, ISO 17025 calibrated The Microtech digital caliper is a long-range precision measuring instrument designed for large-component measurement in toolrooms, fixture construction and heavy machining environments. Long measuring range up to 1,520 mm Wireless + USB data output for process integration ISO 17025 calibrated with certificate IP54 protection suitable for workshop conditions Efficient data capture for large components The long-range digital caliper offers a measuring span from 20 mm to 1,520 mm, enabling dimensional checks on sizeable assemblies without multiple setups. The instrument provides a clear 2.4" colour display and a display resolution of 0.01 mm, while the stated accuracy of 0.05 mm is optimised for workshop metrology on large parts. Integration is simplified by Wireless + USB data transfer, allowing fast logging into inspection software or SPC systems and reducing manual transcription errors. This combination of range, readable display and digital output supports faster inspection cycles and better process control. Robust construction and workshop suitability Built for heavy use, the caliper features an IP54 ingress rating that resists dust and splash water commonly encountered at the bench. The specified measuring force range of 1–20 N accommodates different operator handling while keeping readings consistent. Classified as a Long caliper (measuring range category: 1,000–2,000 mm), it balances rigidity and reach so measurements remain reproducible along extended jaws. Included measuring cones Ø20 mm and Ø35 mm extend functionality for bore-centre and hole-spacing checks, reducing the need for separate fixtures when verifying larger components. Traceable calibration for quality assurance The instrument is delivered fully calibrated under ISO 17025, with an accompanying calibration certificate that documents traceability to national standards. This certification supports internal quality processes and external audits by providing verifiable measurement uncertainty and calibration data. For procurement and quality departments, the ISO 17025 report reduces incoming-inspection work and simplifies documentation for regulatory compliance and supplier quality control. Practical handling and application integration Practical features aid day-to-day use: the 0.01 mm display resolution gives straightforward readouts while the overall stated accuracy of 0.05 mm aligns with the tolerances frequently required for large assemblies and fixture alignment. The digital interface (Wireless + USB) enables direct data capture into inspection routines, and the robust design lowers the risk of downtime in busy workshops. Accessories supplied with the instrument, including the measuring cones Ø20/Ø35, make the device immediately usable for common bore and centre-to-centre measurements without additional tooling. Contact Metav Werkzeuge in Emmerich for application advice and supply of the Microtech long-range digital caliper with ISO 17025 certificate Technical data Article number: 141731517 GTIN: 4061905452413 Brand: Microtech Metrology Digital display: Colour 2.4" Data output: Wireless + USB Calibration: ISO 17025 (certificate included) Numbers / Core technical data Measuring range: 20–1,520 mm Display resolution: 0.01 mm Accuracy: 0.05 mm Measuring force: 1–20 N Protection class: IP54 Special features / Versions Digital caliper, long-range class (1,000–2,000 mm) Measuring cones Ø20 mm and Ø35 mm included Colour display for clear readout Wireless + USB for process integration Delivered with ISO 17025 calibration certificate FAQ Is the caliper supplied with a calibration certificate? Yes. The Microtech digital caliper is supplied fully calibrated under ISO 17025 and includes the corresponding calibration certificate. How is measurement data transferred from the instrument? Data can be exported via Wireless and USB interfaces, enabling direct capture into inspection software or SPC systems. What measuring range does this caliper cover? The instrument covers a range from 20 mm up to 1,520 mm, placing it in the long-range caliper category for large-component measurement. Is the caliper suitable for use in a workshop environment? The caliper has an IP54 protection rating, which provides resistance against dust and splashing water typical in workshop conditions. Which accessories are included with the caliper? The delivery includes measuring cones Ø20 mm and Ø35 mm to support bore and centre-to-centre measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
1520mm Digital Precision Caliper For Bore Spacing With Ø20/Ø35 Probes, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of ISO 17025 traceability, the extended 20–1520 mm measuring range and IP67 protection for dependable large‑format measurements; order the calibrated instrument directly via Metav Werkzeuge or consult our specialists for application advice. Precision Caliper 20–1520 mm (Digital, IP67) — Microtech Metrology The Precision Caliper from Microtech Metrology is a long‑reach, ISO‑calibrated digital measuring instrument designed for accurate inspection of large components and workshop assemblies. ISO 17025-calibrated with certificate Measurement range 20–1520 mm IP67-rated for dust and water protection Swiss Digit display, 11 mm height Supplied with Ø20 mm and Ø35 mm cones Traceable accuracy that supports quality control The instrument is delivered fully calibrated according to ISO 17025, including a calibration certificate, which ensures measurable traceability for audit‑ready inspection routines. With a stated accuracy of 0.05 mm and a standard display resolution of 0.01 mm, the caliper provides the reproducible results required for production control and incoming inspection. This combination of certified calibration and repeatable resolution reduces uncertainty in acceptance decisions and documentation. Extended reach for large assemblies and fixtures Built for measurements up to 20–1520 mm, this long‑range solution covers large workpieces without resorting to multiple tools. The elongated beam balances reach with stiffness to keep deflection and measurement error low across the span, making it suitable for fixtures, housings and larger machined parts. Supplied Ø20 mm and Ø35 mm measuring cones facilitate bore‑centre and distance measurements, converting the caliper into a versatile instrument for both external and specialised internal tasks. Robust construction and clear readout for everyday use Designed for workshop environments, the caliper carries an IP67 rating that guards internal electronics from dust ingress and temporary immersion. The Swiss Digit display (11 mm character height) delivers high‑contrast numerals that speed up readings and reduce transcription errors on the shop floor. The compact electronic package and sealed Slides ensure that the device remains durable under frequent use while keeping handling intuitive for operators with varying levels of metrology experience. Streamlined workflow integration and practical benefits Integration into inspection routines is straightforward: the instrument’s certified status supports traceable records, while the rugged design and easy‑to‑read display shorten inspection cycles and lower rework rates. For quality engineers and workshop supervisors, the caliper represents an efficient way to combine large measurement capability with laboratory‑grade calibration—supporting consistent production quality and fewer measurement‑related stoppages. For tailored measurement advice or to request the ISO 17025‑calibrated Precision Caliper, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 141731513 GTIN: 4061905452567 Manufacturer: Microtech Metrology ECLASS: 21170344 Facts Measuring range: 20–1520 mm Resolution (reading): 0.01 mm Accuracy: 0.05 mm Display: Swiss Digit, character height 11 mm Protection rating: IP67 Special features ISO 17025 calibration with certificate Supplied with measuring cones Ø20 mm and Ø35 mm Long‑range caliper suitable for large components Digital readout for fast measurement capture Rugged, workshop‑ready construction FAQ Is the caliper supplied with a calibration certificate? Yes. The Precision Caliper from Microtech Metrology is delivered fully calibrated according to ISO 17025 and includes the corresponding calibration certificate. What measurement range does the instrument cover? The instrument measures from 20 mm to 1520 mm, classifying it as a long‑range caliper suitable for larger assemblies and fixtures. What accuracy and resolution can be expected? Declared accuracy is 0.05 mm with a display resolution of 0.01 mm, providing repeatable readings for standard workshop and production control tasks. Can the caliper be used in harsh workshop conditions? Yes. The device has an IP67 rating for dust and temporary immersion protection, making it robust enough for demanding workshop environments. Which accessories are included for special measurements? The delivery includes measuring cones Ø20 mm and Ø35 mm, enabling bore‑centre and specialised internal measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
1520mm Digital Precision Caliper With Wireless Data, Swiss Digit Display 11mm, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of long-range measurement, wireless data transfer, and ISO 17025 calibration for reliable quality control of large components. Order the device directly via Metav Werkzeuge or ask the consultants for application support. Digital caliper 20–1520 mm by Microtech Metrology — long-range, wireless and IP67 protected Digital caliper 20–1520 mm from Microtech Metrology is a purpose-built instrument for precise dimensional checks across extended components, combining a large measuring range with robust protection and certified calibration. Long 20–1520 mm measuring range Wireless data transmission enabled IP67 dust and water protection Supplied calibrated to ISO 17025 Traceable accuracy for production and inspection The Digital caliper delivers measurable, documented accuracy that supports routine quality tasks and audit trails. Calibrated to ISO 17025, the instrument includes a calibration certificate so results are immediately traceable; the stated measuring accuracy of ±0.05 mm together with a display resolution of 0.01 mm ensures readings meet standard workshop tolerances while providing a verifiable basis for acceptance or adjustment. This combination reduces rework and simplifies compliance documentation. Extended reach without compromising stiffness With a measuring span of 20–1520 mm, the instrument is classified for Long-range measurements and is designed to bridge the gap between bench tools and heavy-duty gauges. The extended span enables checks of large fixtures, housings and assemblies that would otherwise require multiple instruments; engineered profile stiffness maintains repeatability over the length and helps to reduce deflection-related error during two-person handling or when using stands. Rugged build and seamless data workflows Protected to IP67, the caliper resists water and dust ingress for demanding shop-floor environments. The Swiss Digit 11 mm display provides clear numeric readout even under workshop lighting, while Wireless data output allows direct transfer of measured values to SPC or inspection software, cutting transcription time and the potential for human error. The robust electronics and sealed slider simplify daily use and support an efficient metrology workflow. Ready for large-part measurement with practical accessories Delivery includes measuring cones Ø20 mm and Ø35 mm, enabling straightforward measurement of hole centres or distance-to-centre tasks without additional adaptors. The instrument is tailored to machine shops, toolrooms and fixture manufacturers who require long travel and documented results; the combination of wide range, connectivity and certified calibration supports both shop-floor control and formal inspection routines with minimal setup. The integrated features streamline inspection steps and support fast decision-making during production. Choose the Microtech Metrology digital caliper for precise long-range measurement and contact Metav Werkzeuge for personalised advice and supply from Emmerich. Technical Data Article number: 141731514 GTIN: 4061905452307 Manufacturer: Microtech Metrology Facts Measuring range: 20–1520 mm Resolution: 0.01 mm Accuracy: ±0.05 mm Display height: 11 mm Data output: Wireless Protection rating: IP67 Special features Calibrated to ISO 17025; calibration certificate included Accessories: measuring cones Ø20 mm and Ø35 mm Digital display (Swiss Digit) Suitable for large-format components and workshop use FAQ What calibration documentation is supplied with this caliper? The Microtech Metrology digital caliper (SKU 141731514) is delivered fully calibrated to ISO 17025 and includes the official calibration certificate with measurement results. Is the instrument suitable for use at the machine or outdoors? Yes, the device is rated IP67, so it withstands dust and temporary immersion, making it suitable for harsh shop-floor conditions and occasional outdoor use during on-site checks. Can measured values be transferred directly to quality software? Wireless data output enables direct transmission of readings into SPC or inspection systems, reducing manual entry and improving data integrity for statistical process control. What is the usable measuring range and how is the tool classified? The measuring range is 20–1520 mm; this places the instrument in the long-range category, intended for large components where extended reach and maintained stiffness are required. Which accessories are included for specialised measurements? Included are measuring cones Ø20 mm and Ø35 mm, supplied to simplify centre-to-centre and bore-distance measurements without separate adaptors. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
15mm Bore Distance Measuring Insert Cone Measuring Faces For Digital Caliper Series 240.201-240.205 - Metav IndustryLine
Combines Ø 15 mm precision contact, conical measuring faces and stainless-steel robustness for reproducible bore-centre checks; compatible with the digital uni calipers series 240.201–240.205. Order the attachment directly via Metav Werkzeuge or consult our specialists for application support. M240.253 Bore-centre measuring insert Ø 15 mm — Conical faces for digital uni calipers (Metav IndustryLine) A M240.253 bore-centre measuring insert designed as an accessory for digital uni calipers, providing focused contact geometry for reliable centre-to-centre measurements in bores and recesses. Compatible with digital uni calipers 240.201–240.205 Conical measuring faces for bore centres Stainless steel construction Ø 15 mm precision contact diameter Accurate centring for bore-to-bore measurements The attachment is engineered to convert a standard digital caliper into a dedicated bore-centre gauge: the conical measuring faces guide the contact point into the bore, reducing lateral play and improving repeatability. With a defined Ø 15 mm contact diameter the insert supplies a consistent reference area that simplifies the measurement of centre distance between two bores. This rational design reduces measurement scatter and supports faster quality decisions in daily inspection work. Robust, low-mass design for repeatable results Made from stainless steel, the accessory resists corrosion and retains geometric integrity under workshop conditions; its compact 48 mm length and light 0.08 kg mass keep the caliper balanced and easy to handle. The material choice and precise machining ensure long service life and minimal wear at the contact faces, which translates into lower maintenance and steady performance across repeated checks. Integrates into inspection routines and production workflows As a purpose-made caliper attachment, this measuring insert installs quickly on compatible digital units and supports straightforward measurement sequences for production and maintenance tasks. By converting existing calipers into specialised gauges, the component contributes to leaner tooling stocks and faster throughput while preserving measurement confidence. Backed by Metav’s distribution and quality filter in Emmerich, the Metav IndustryLine accessory benefits from established supply reliability and the company’s experience in precision metrology — a practical choice for shops aiming to democratise accurate measurement. For reliable bore-centre checks with the Metav IndustryLine M240.253, contact Metav Werkzeuge for application guidance or to request technical details at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: M240.253 GTIN: 4061905053856 Category: Caliper accessory Facts Diameter: Ø 15 mm Weight: 0.08 kg Length: 48 mm Material standard: stainless steel ECLASS: 21170324 Special features Conical measuring faces for centring in bores Compatible with digital uni calipers series 240.201–240.205 Precise contact geometry for bore-centre measurements Caliper accessory for inspection and workshop use FAQ How is the M240.253 used to measure bore centres? The M240.253 is fitted to a compatible digital uni caliper and uses its conical measuring faces to centre in bores, allowing the caliper to capture accurate centre-to-centre distances. Is the insert suitable for corrosion-prone environments? Yes. The insert is manufactured from stainless steel, so the M240.253 offers enhanced resistance to corrosion in typical workshop conditions. Which caliper models are compatible with this attachment? Compatibility is specified for the digital uni calipers series 240.201–240.205; the insert was designed to integrate with those digital units. Does the measuring insert alter caliper handling significantly? The component is compact and lightweight (0.08 kg, 48 mm), preserving the balance and one-handed usability of the instrument while adding specialised bore-centre capability. Can the accessory be used for non-circular features or shallow bores? The conical contact geometry is optimised for standard bores; for irregular or very shallow features, measurement strategy should be reviewed and, if necessary, Metav Werkzeuge’s technical team can advise on suitability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15mm Inner Measuring Insert Flat 5×0.6mm Tips L25 For Digital Precision Caliper, Stainless Steel - Metav IndustryLine
Take advantage of the combination of flat measuring face geometry and stainless steel durability to measure narrow grooves reliably from 15 mm; the compact profile and light weight ensure quick mounting on compatible digital calipers. Order the insert directly via Metav Werkzeuge or consult the Metav team for compatibility advice. Metav IndustryLine M240.213 internal measuring insert — flat 5 x 0.6 mm, L = 25, from 15 mm The M240.213 internal measuring insert for Digital Uni Calipers series 240.201–240.205 extends internal measuring capability from 15 mm, offering precise groove and notch measurement in confined spaces. Flat measuring face 5 x 0.6 mm for narrow grooves For internal measurements starting at 15 mm Stainless steel construction for corrosion resistance Precise groove measurement in compact spaces The insert’s flat measuring face (5 x 0.6 mm) and short jaw length L = 25 mm were developed specifically for narrow groove and slot inspection. The slim contact geometry concentrates the measuring edge without enlarging the profile, which reduces the risk of interfering with neighbouring features; this results in more reproducible internal readings when used with a compatible digital caliper. The component’s form is particularly beneficial for quality control tasks where access is limited and repeatability is essential, such as assembly checks and finishing inspections. Robust, lightweight construction for reliable handling Made from stainless steel, the insert combines corrosion resistance with dimensional stability. At a weight of 0.04 kg, the accessory adds minimal mass to the caliper, maintaining the instrument’s balance and ease of use during repetitive measurement cycles. The durable material reduces maintenance needs and prolongs service life in workshop environments, while the compact design supports fast tool changes and secure clamping on the caliper jaw, improving throughput in routine inspection processes. Compatibility and practical application in production Designed for direct installation on the Digital Uni Calipers series 240.201–240.205, the insert enables internal measurements starting at 15 mm, making it suitable for groove, notch and small-diameter internal checks. The flat measuring surface improves contact on step-like geometries and prevents rocking that can occur with rounded jaws. In machining, toolroom and maintenance settings, the insert provides a pragmatic extension of a caliper’s functionality, reducing the need for separate specialised gauges and supporting faster in-process decisions. For advice on fitment and to procure the Metav IndustryLine M240.213 insert from Emmerich, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M240.213 GTIN: 4061905053702 Material: stainless steel Weight: 0.04 kg Length: 50 mm Facts Measuring face: 5 x 0.6 mm Measuring jaw length: L = 25 mm Internal measurement from 15 mm Suitable for groove and notch measurements Special features Compatible with Digital Uni Calipers series 240.201–240.205 Flat measuring surface for narrow grooves Lightweight design for easy handling FAQ What tasks is the insert intended for? The Metav IndustryLine M240.213 internal measuring insert is intended for narrow groove, notch and small internal-diameter measurements beginning at 15 mm when fitted to Digital Uni Calipers series 240.201–240.205. Is the insert resistant to corrosion? Yes. The measuring insert is manufactured from stainless steel, providing corrosion resistance and stable performance in workshop and production environments. Will the insert affect caliper handling significantly? No. At 0.04 kg the accessory is lightweight and maintains the caliper’s balance, enabling reliable manual handling during repetitive inspection sequences. Can the insert be used for step and slot checks? Yes. The flat 5 x 0.6 mm measuring face and 25 mm jaw length are optimised for step-like geometries, narrow slots and grooves where a slim contact area improves measurement repeatability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision calipers for accurate, repeatable measurement
Calipers are the indispensable length-measuring tools for industry and workshop environments, enabling fast and exact external, internal, depth and step measurements. Our professional range of precision calipers, including vernier calipers, dial calipers and digital calipers, combines mechanical robustness with modern data handling to support consistent quality assurance.
How these calipers work and where they help most
Analogue vernier calipers deliver reliable, autarkic operation via the vernier scale and are best suited to heavy-duty workshop use where durability matters. Digital calipers provide a contrast-rich display, minimise reading errors and speed up inspection routines through functions such as zero setting and data output. At the high end, touchscreen calipers from Microtech feature an integrated microcomputer, colour touch display, built-in error-tolerance checks and wireless data transmission, making them suited for Industry 4.0 workflows. Workshop calipers with extended measuring ranges offer optional fine adjustment and rounded tips for interior measurements, while in-built calipers can be mounted directly to machines or test rigs to monitor travel. Specialty calipers cover tasks such as deep grooves, pipe wall thickness, brake disc inspection, three-point measurements and bespoke geometries.
Tangible benefits that improve production performance
- Faster throughput: digital calipers with data output reduce manual entry and accelerate quality checks.
- Higher repeatability: robust mechanical design and error-tolerance controls raise measurement consistency.
- Flexible integration: wireless data transmission and touchscreen operation simplify digitisation to existing systems.
- Reduced downtime: workshop and in-built variants with fine adjustment minimise rework and set-up time.
- Application coverage: specialty calipers adapt to complex geometries, from three-point checks to deep-niche measurements.
Microtech and metav — quality and supply you can rely on
For high-end, touchscreen-equipped instruments, Microtech represents the technological benchmark thanks to its integrated controls and wireless capabilities. As a precision partner, Metav complements this with decades of experience and a comprehensive offering: more than 250,000 products, a European quality filter in Emmerich and the trust of over 48,000 customers, making Metav a sensible central source for calipers and measuring equipment.
Quick summary
Calipers — from analogue vernier to touchscreen digital — deliver the measurement accuracy and data connectivity modern production demands while reducing inspection time and improving repeatability.
FAQ
What are the main differences between analogue and digital calipers?
Analogue vernier calipers rely on a vernier scale and are prized for ruggedness and independence from power, whereas digital calipers provide a contrast display, zero setting and data output to eliminate readout errors and speed up quality processes.
Can calipers be integrated into a digital inspection workflow?
Yes. Many digital calipers and touchscreen models support data output and wireless data transmission, enabling direct transfer of measurements into quality-management systems or statistical process control.
Which caliper type is best for large measuring ranges in a workshop?
Workshop calipers with extended measuring ranges and optional fine adjustment are designed for large components; they maintain mechanical stability and are available with rounded interior jaws for safer internal measurements.
Are there calipers for specialised geometries like deep grooves or brake discs?
Specialty calipers are explicitly engineered for such tasks. They feature tailored measuring faces for deep-niche measurements, pipe wall thicknesses, brake-disc checks and three-point or flexible geometries.
How do touchscreen calipers from Microtech improve quality control?
Microtech touchscreen calipers combine an integrated microcomputer, colour touch display and built-in error-tolerance checks with wireless data transmission, allowing immediate verification, reduced human error and seamless digitisation in line with Industry 4.0 practices.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com