Precision calipers for reliable industrial measurement
Precision calipers and their variants provide fast, repeatable outside, inside, depth and step measurements to ensure component conformity and process control on the shopfloor, combining mechanical robustness with digital data handling for traceable results. Designed for use in industrial quality assurance and manufacturing, these calipers serve applications from rough workshop environments to precision inspection, with options such as analogue vernier calipers for durable, battery‑free operation and digital calipers offering clear displays and data output to speed up quality workflows. Specialist formats, including workshop calipers with extended ranges and built‑in mounting calipers for machine or fixture monitoring, extend capability to long strokes and embedded measurement tasks, while bespoke models handle deep grooves, pipe wall thicknesses and three‑point or other complex geometries. The range emphasises highest accuracy and process integration, featuring high‑end touchscreen models with integrated microcomputers, wireless data transfer and Industry 4.0 compatibility to modernise measurement and quality data capture.
16-150 mm Digital Internal Caliper With Preset, Stainless Steel, Metal Housing, 0.01 mm Resolution, Data Output RB 5 - Metav IndustryLine
Take advantage of the combination of accurate digital readout, robust stainless construction and practical preset function for efficient internal measurements; order the caliper directly via Metav Werkzeuge or consult the Metav team for application advice. Digital Internal Caliper M240.030.N — internal measuring caliper, 16–150 mm, stainless hardened Digital Internal Caliper M240.030.N is a purpose-built instrument for precise internal and groove measurements in workshop and production environments, featuring a digital preset and robust stainless-steel construction. Digital readout with preset function Hardened stainless-steel construction Measuring range 16–150 mm Data output RB 5 interface High-precision internal measurement for everyday workshop tasks The Digital Internal Caliper M240.030.N delivers reliable numerical control in a compact footprint. With a resolution of 0.01 mm (display) and an inch resolution of 0.0005 in, the instrument meets the expectations of standard digital calipers in machining and quality control. Classified as Standard (measuring range up to 100–300 mm), it provides the balance between reach and stiffness that is essential for routine internal checks on parts, bores and grooves. The integrated preset function allows quick zeroing at a chosen datum, cutting setup time and reducing operator adjustments. The numerical readout and steady jaw guidance minimise subjective reading errors and support consistent, repeatable inspection across production batches. Robust design built for shop-floor durability Constructed from hardened stainless steel with a protective metal housing around the electronics, the caliper is engineered for frequent use in industrial settings. The hardened surfaces resist wear from repeated contact with machined components while the metal casing shields the display and controls from impacts and coolant splash. A jaw length of 36 mm provides secure contact in internal grooves and recesses without excessive deflection; the whole instrument weighs 0.56 kg, offering a reassuring balance between solidity and manoeuvrability. Delivered in a transport case (plastic or wooden case depending on version), the tool arrives ready for safe storage and straightforward transport between measuring stations. Connectivity and controls that speed data capture Data transfer is simplified by the RB 5 data output, enabling compatibility with common data loggers and inspection systems for traceable measurement capture. The digital display features dedicated ON/OFF, SET, P+ and P- buttons for intuitive operation: rapid switching of units, preset adjustments and straightforward zeroing reduce measurement cycle time and help maintain throughput. Powered by a 3 V supply, the measuring system is optimised for low energy consumption and reliable performance during shift work. These technical choices translate into measurable efficiency gains on the shop floor and make the instrument a practical component in quality routines and production checks. Designed for practical inspection workflows For engineers and technicians who require repeatable internal readings without complex setup, this caliper combines a clear digital interface with the mechanical robustness expected from workshop metrology. The stainless-steel build and factory standard specification ensure long-term dimensional stability, while the compact internal-measurement geometry supports tasks from small-bore inspections to groove depth checks. Integration of numerical output means results can be archived or processed automatically, fitting into digital quality processes and reducing manual transcription errors. Choose Metav IndustryLine precision for dependable internal measurements — contact Metav Werkzeuge for ordering or technical guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M240.030.N GTIN: 4054469159881 Manufacturer: Metav IndustryLine Facts Measuring range: 16–150 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.56 kg Jaw length: 36 mm Power supply: 3 V Special features Material: hardened stainless steel, metal housing Digital display with ON/OFF, SET, P+, P- buttons Preset function for fast datum setting Data output: RB 5 Delivered in a transport case (plastic or wooden case) FAQ What types of measurements can be performed with this caliper? The Digital Internal Caliper M240.030.N performs internal, bore and groove measurements within its 16–150 mm range and is designed for precise inside-dimension checks. Is the instrument suitable for production quality control? Yes. With a resolution of 0.01 mm and digital output RB 5, the caliper supports routine quality-control tasks and integration into data collection workflows. What materials is the caliper made from and how durable is it? The instrument is made of hardened stainless steel and features a protective metal housing, providing wear resistance and durability for workshop use. Does the caliper include a case for transport and storage? Yes. The tool is delivered in a transport case (plastic or wooden case depending on the item) to protect the instrument during transport and storage. Can measurement data be exported directly to inspection software? Measurement values can be transferred via the RB 5 interface, enabling connection to compatible data loggers and inspection systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Digital Caliper For Bore Spacing With 11mm Display, IP54, ISO 17025 Calibrated - Microtech Metrology
Benefit from traceable calibration, robust protection and USB data output for faster, reproducible bore-distance measurements; this combination reduces rework and speeds quality checks. Take advantage of the ISO 17025 calibration, IP54 dust protection and the 10–160 mm measuring range. Order the digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Microtech Metrology Digital Caliper – ISO 17025 calibrated, USB output The Microtech Metrology digital caliper designed for precise measurement of bore distances in workshop and production environments, featuring a clear digital readout and data interface for seamless documentation. ISO 17025 calibration included USB data output for traceable records IP54 protection for workshop use Hand-finished measuring jaws Traceable calibration and consistent measurement quality A caliper with an ISO 17025 calibration certificate delivers documented traceability that matters in quality control and incoming inspection. The device’s ±0.03 mm stated accuracy together with a 0.01 mm display increment provides a reliable basis for pass/fail decisions and acceptance tests. Having the calibration certificate included means measurement results can be archived and audited without additional calibration steps, reducing downtime and administrative effort. Robust workshop performance and data workflow integration Built for daily use at the bench, this instrument combines IP54 ingress protection with a large, easy-to-read digital display (height 11 mm) and USB data output for direct transfer into quality-management systems. The dust-resistant construction and clear readout reduce reading errors and the risk of contamination-driven faults, while the USB interface streamlines data capture for statistical process control or documentation, increasing throughput and lowering manual transcription errors. Practical handling and accessories for bore-distance tasks With a measuring range of 10–160 mm, this tool fits the Standard class for general machine‑shop and metalworking tasks, offering a practical balance of reach and rigidity. Hand-finished jaws ensure consistent contact geometry for repeatable readings, and the supplied measuring cones (Ø20 mm and Ø35 mm) simplify accurate bore-distance setups. These features reduce setup time and make the instrument suitable for routine checks on fixtures, housings and bores without sacrificing ease of use. Contact Metav Werkzeuge for expert advice on selecting the right Microtech Metrology digital caliper, request the ISO 17025 certificate or arrange prompt delivery from Emmerich Technical data Article number: 141730151 GTIN: 4061905036347 Brand: Microtech Metrology Category: digital calipers Numbers / Core technical data Measuring range: 10–160 mm Resolution (display): 0.01 mm Stated accuracy: ±0.03 mm Digital display height: 11 mm Protection class: IP54 Special features ISO 17025 calibration and certificate included USB data output Hand-finished measuring jaws Accessories included: measuring cones Ø20 mm and Ø35 mm Digital instrument for bore-distance measurement FAQ Is the caliper delivered with an official calibration certificate? Yes. The Microtech Metrology digital caliper is supplied calibrated to ISO 17025 and includes the calibration certificate for documentation and traceability. What is the usable measuring range and classification of the instrument? The instrument offers a 10–160 mm measuring range, placing it in the Standard class, which is ideal for everyday machine‑shop and metalworking measurement tasks. How accurate are the readings and what is the display resolution? Readings are stated at ±0.03 mm with a display resolution of 0.01 mm, suitable for standard quality-control and workshop inspections. Can measurement data be exported directly to a computer? Yes. The device provides a USB data output for direct transfer of measurements into spreadsheets or quality‑management software. Are there accessories included for bore measurements? The delivery includes measuring cones Ø20 mm and Ø35 mm, which facilitate precise bore-distance setups and reduce preparation time. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
160mm Digital Precision Caliper Colour 1.5" Touchscreen, Wireless USB, IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of precise measurement, reliable workshop protection and integrated data transfer to keep inspection workflows fast and traceable. The included ISO 17025 calibration certificate and wireless plus USB output make this caliper a practical choice for production and quality control; order directly via Metav Werkzeuge or ask the consultants for configuration advice. Precision Caliper — Microtech Metrology · 1.5" colour touchscreen · Wireless + USB Precision Caliper is a calibrated digital measuring instrument suited to bore-distance checks and general workshop inspection tasks, combining a compact 10–160 mm range with industrial data connectivity. *Colour 1.5" touchscreen display *Wireless and USB data output *Resolution 0.005 mm for fine readings *IP54 protection for workshop environments Reliable accuracy for routine inspection This digital measuring instrument delivers reproducible results through a fine resolution of 0.005 mm and a controlled measuring force range of 1–20 N, which supports consistent contact pressure during runs. Supplied with an ISO 17025 calibration certificate, the device is traceable to international lab standards and suited to formal quality checks. With a measurement span of 10–160 mm it falls into the Standard range for machine‑shop and metalworking tasks, offering the best compromise between reach and rigidity for everyday inspection. Fast data capture that reduces errors Equipped with both Wireless and USB outputs and a 1.5" touchscreen colour display, the caliper streamlines data collection and minimises transcription mistakes. Live transfer via wireless connectivity or direct USB export enables immediate entry into inspection reports or SPC systems, shortening process cycles. The clear digital readout and touch controls speed up repetitive measurements, helping production teams maintain throughput without sacrificing traceability. Built for the workshop, designed for durability The instrument’s IP54 ingress rating protects against workshop dust and water spray, making it robust enough for routine use near machine tools. The construction and ergonomic slider ensure one‑hand operation while preserving measurement stability over the full 10–160 mm travel. The combination of a sealed housing and a responsive display preserves uptime and reduces maintenance interventions in demanding environments. Practical integration into quality workflows This caliper integrates into inspection protocols as a reliable source of verified dimensional data and is suitable for tasks from first‑article inspection to in‑process checks. Supplied by Microtech Metrology and available through Metav Werkzeuge, the unit benefits from a European distribution hub that emphasises consistent stock and documentation. The delivery includes the calibration certificate, enabling direct entry into quality records and easing audit preparation. Contact Metav Werkzeuge to discuss the Microtech Metrology precision caliper with ISO 17025 calibration and integrated Wireless+USB connectivity for seamless inspection workflows Technical data Article number: 141730157 GTIN: 4061905037030 Manufacturer: Microtech Metrology SKU: 141730157 ECLASS: 21170344 Facts Measurement range: 10–160 mm Resolution: 0.005 mm Measuring force: 1–20 N Display: Colour 1.5" touchscreen Protection class: IP54 Special features Digital data output: Wireless + USB Supplied with ISO 17025 calibration certificate Suitable for standard machine‑shop inspections Compact, calibrated digital caliper for bore distances FAQ Is the caliper delivered calibrated? Yes. The Precision Caliper from Microtech Metrology is supplied with a calibration certificate performed to ISO 17025. What is the usable measurement range? The device measures from 10 to 160 mm, placing it in the Standard class ideal for general machine‑shop and metalworking applications. How accurate are the readings? The caliper provides readings at a resolution of 0.005 mm and uses a controlled measuring force of 1–20 N to aid reproducibility. Can measurement data be exported to a PC or SPC system? Yes. Measurement values can be transferred via Wireless connectivity or via USB for immediate integration into inspection or SPC software. Is the instrument suitable for use at the workshop bench? The IP54 rating and sealed electronics make it suitable for routine workshop environments with dust and occasional spray. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
160mm Digital Precision Caliper For Bore Centres, Swiss Digital 11mm Display, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of precise measurement, robust protection and an included ISO 17025 calibration certificate to streamline quality control and reduce rework. Order the digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Digital Caliper (10–160 mm) by Microtech Metrology — IP67, ISO 17025 calibrated Digital Caliper (10–160 mm) is a workshop-ready precision instrument for machine and metalworking measurement tasks, featuring a Swiss digital display and dust‑ and water‑resistant construction. High-contrast Swiss digital display 11 mm Measurement range 10–160 mm IP67 dust and water protection Delivered calibrated to ISO 17025 Accurate measurements backed by accredited calibration The instrument delivers a 0.01 mm display resolution on a Swiss digital display (height 11 mm), which supports fast, repeatable readings on the shop floor and inspection bench. Supplied fully calibrated to ISO 17025, a traceable calibration certificate accompanies each unit, which reduces uncertainty in quality control processes and simplifies documentation for audits. This certified calibration is particularly valuable where measurement traceability and documented compliance are required. Robust design for everyday workshop use Designed for the typical needs of machining and metalworking, this caliper covers the 10–160 mm range—classified as Standard—so it balances reach with rigidity for frequent one‑hand measurements. The housing and slide are engineered to withstand workshop conditions; the instrument is IP67 rated for protection against dust and temporary immersion, and lubricated components reduce maintenance. Hand‑finished measuring jaws ensure precise contact geometry while the self‑lubricating slide enhances long‑term smoothness and repeatability. Faster inspection, fewer rejects Consistent readings and accredited calibration accelerate inspection cycles and support inline quality control. The clear digital readout minimises interpretation errors and the ergonomic slide enables quick checks of shafts, bore centres and part steps. Where production throughput and first‑pass yield matter, the combination of readable display, robust protection and factory calibration helps reduce rework and keeps assembly and machining processes on schedule. Built to perform in demanding environments The tool was conceived for regular workshop use: sturdy jaw surfaces, a resilient slide mechanism and splash protection make it suitable for busy benches and light production lines. The precise display and factory finishing provide confidence when measuring small tolerances, while the ISO 17025 certificate documents that the caliper meets formal accuracy requirements. For teams upgrading measurement routines, this instrument offers a pragmatic balance of durability and traceable precision. For certified delivery and detailed technical advice about the Microtech Metrology digital caliper, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to discuss specifications and calibration documentation Technical Data Article number: 141730153 GTIN: 4061905036774 Manufacturer: Microtech Metrology SKU: 141730153 Facts Measurement range: 10–160 mm Resolution / reading: 0.01 mm Display: Swiss Digital, height 11 mm Protection class: IP67 Calibration: ISO 17025 certificate included Special features Hand‑finished measuring jaws Self‑lubricating slide Digital caliper design Standard class measurement range (10–160 mm) FAQ What measurement range does the caliper cover? The digital caliper covers a range of 10–160 mm, making it suitable for standard workshop and machine‑shop tasks (SKU 141730153). Is an official calibration certificate supplied? Yes, the caliper is delivered with a full ISO 17025 calibration certificate issued for the Microtech Metrology digital caliper. How resistant is the instrument to dust and liquids? The unit is rated IP67, which protects against dust ingress and temporary immersion, suitable for harsh workshop environments. What display resolution can be expected? The Swiss digital display provides a 0.01 mm resolution for rapid and precise readings. Are the measuring jaws finished for accuracy? The measuring jaws are hand‑finished, providing precise contact geometry to support repeatable measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
160mm Digital Precision Caliper for Bore Spacing, Swiss Digital Display 11mm, IP67, ISO 17025 - Microtech Metrology
Compact, factory-calibrated performance with rugged protection: the combination of ISO 17025 traceable calibration, IP67 ingress resistance and a Wireless data output ensures dependable measurements in demanding shop-floor conditions. Order the calibrated caliper directly via Metav Werkzeuge or consult our specialists for application advice. Caliper by Microtech Metrology — 10–160 mm, Wireless, ISO 17025 calibrated Caliper by Microtech Metrology is a digitally driven measuring tool designed for standard workshop and machine‑shop tasks, combining a Swiss digital readout with wireless data transfer for efficient quality control. Swiss Digital display, 11 mm height Wireless data output for traceable logging ISO 17025 calibrated with certificate IP67 protection for harsh environments Reliable measurement workflow with industrial connectivity This caliper brings wireless data output into routine measurement tasks, allowing measured values to be transferred directly to logging systems or inspection software without manual transcription. The Swiss Digital display with 11 mm numerals ensures clear legibility even under workshop lighting, while the sealed electronics meet IP67 protection, keeping the unit functional during exposure to coolants or fine particulates. Together, these features reduce transcription errors and speed up inspection loops, which contributes directly to process reliability and traceability. Precision and handling tailored to everyday shop use Classified as a standard caliper for the 10–160 mm range, this instrument balances reach and rigidity for common machining and metalwork requirements. The instrument is equipped with hand-crafted measuring jaws, which improves contact repeatability and reduces measurement scatter on uneven surfaces. The slide is self-lubricating, providing smooth motion and stable zero retention during repeated measurements. These design choices support consistent results in production environments where repeatability matters more than extreme-range capability. Calibration confidence and documentation for quality control Delivered fully calibrated to ISO 17025, the caliper includes a calibration certificate suitable for internal quality records or external audits. This formal calibration level confirms metrological traceability and documents instrument performance against recognised standards. For customers implementing documented inspection procedures, the provided certificate simplifies instrument acceptance and periodic control scheduling, ensuring that measurement data remain auditable and comparable over time. Built for workshop durability and practical use Durable construction and protective sealing combine with a compact form factor to offer a practical inspection tool that keeps pace with everyday production demands. The IP67 rating means the unit withstands dust ingress and temporary immersion, while the robust digits and tactile slide ensure the readout remains usable after routine handling. Wireless transfer capability further reduces handling steps and makes integration into digital quality systems straightforward, enhancing throughput without compromising measurement integrity. Contact Metav Werkzeuge for tailored procurement or application advice on the Microtech Metrology caliper — calibrated to ISO 17025 and ready for immediate use; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: 141730154 Brand: Microtech Metrology GTIN: 4061905036781 ECLASS: 21170344 Core technical values Measurement range: 10–160 mm Resolution: 0.01 mm Display height: 11 mm Protection class: IP67 Calibration: ISO 17025 certificate included Special features Wireless data output Swiss Digital display Hand-crafted measuring jaws Self-lubricating slide Digital caliper design FAQ What measurement range does this caliper cover? The caliper covers a measuring span from 10 mm up to 160 mm, making it suitable for standard machine‑shop and workshop inspections. Is the device delivered with calibration documentation? Yes, the Microtech Metrology caliper is supplied fully calibrated to ISO 17025 and includes the corresponding calibration certificate for traceability and audit purposes. Can measurement data be transferred electronically? Measurement values can be transmitted via the unit's wireless data output, enabling seamless logging into inspection or SPC systems without manual entry. How robust is the caliper for use in a machining environment? The instrument features IP67 protection, a self‑lubricating slide and hand‑crafted jaws, offering resistance to dust and coolant and stable operation during regular shop use. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
160mm Internal Groove Caliper 0.05mm Graduation, Matt Chrome Plated, Stainless Steel, Supplied in Case - Metav IndustryLine
Benefit from precise vernier resolution and robust stainless construction for dependable workshop measurements; combine 0.05 mm reading clarity with a 20–160 mm measuring range to standardise routine checks — order the M201.135 Internal-groove caliper directly via Metav Werkzeuge or consult our advisors if clarification is required. M201.135 Internal-groove caliper — Metav IndustryLine, 20–160 mm, 0.05 mm The M201.135 is an analogue internal-groove caliper designed for standard workshop use, delivering repeatable measurements of grooves and profiles across a 20–160 mm range. Analogue vernier reading 0.05 mm Measuring range 20–160 mm Matt chrome finish, stainless steel Locking screw for repeatable readings 40 mm jaw length for deep grooves Precise vernier measurement that suits everyday production The vernier scale with a 0.05 mm reading gives a clear, mechanical indication of small increments while the stated measurement uncertainty of ±0.1 mm describes the practical tolerance to expect in workshop conditions. Such a combination supports rational decision-making in quality control: the fine resolution enables quick visual checks, while the specified accuracy frames where the caliper is best applied — routine machine-shop inspections rather than submicron laboratory tasks. This makes the instrument a reliable tool for parts acceptance and process checks. Durable stainless construction for regular industrial use Made from stainless steel (INOX) with a matt chrome finish, the instrument resists corrosion and wears evenly under frequent handling. The material choice reduces surface glare and eases reading under bright lights, while the robust build maintains profile geometry over time. A sturdy jaw length of 40 mm reaches into deeper grooves without sacrificing rigidity, which helps maintain measurement repeatability across multiple workpieces and reduces the need for constant rechecking. Geometry and features tailored to internal-groove inspection The caliper’s jaw geometry is optimised for internal groove measurement, allowing accurate engagement with groove bottoms and narrow profiles. The integrated locking screw secures the slider to preserve a measured value for transfer or comparison, improving workflow efficiency when multiple reference checks are required. As an analogue instrument, it also avoids battery dependence and is straightforward to use where electronic readouts are unnecessary. Practical handling, inspection logic and workshop integration With a 20–160 mm measuring range the tool falls into the standard caliper category, offering a balanced compromise between reach and stiffness for typical metalworking tasks. The analogue format is particularly suited to fast, tactile inspection routines on the shop floor where operators value immediate visual feedback. Clear mechanical scales, combined with the locking function and corrosion-resistant finish, reduce downtime for maintenance and support a predictable inspection process. Choose the Metav IndustryLine internal-groove caliper for dependable workshop measurements and contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M201.135 GTIN: 4054469100661 ECLASS: 21170344 Customs tariff: 90173000 Numbers / Core technical data Measuring range: 20–160 mm Resolution (reading): 0.05 mm Stated accuracy: ±0.1 mm Jaw length: 40 mm Designs / Special features Material: stainless steel (INOX) Finish: matt chrome Type: analogue caliper (vernier) Application: internal-groove measurement Feature: locking screw for fixed readings FAQ How fine is the smallest readable increment on this caliper? The instrument shows a vernier reading of 0.05 mm, which defines the smallest visible graduation on the scale for the M201.135 internal-groove caliper. What measurement range does this tool cover? This analogue caliper covers 20–160 mm, placing it in the standard class suitable for general machine‑shop and metalworking inspections. Is the caliper suitable for measuring deep or narrow grooves? Yes, the jaw geometry and a 40 mm jaw length are designed to access deeper internal grooves and narrow profiles reliably. What do resolution and accuracy mean for daily checks? Resolution (0.05 mm) is the smallest scale step the vernier displays; the stated accuracy (±0.1 mm) indicates the practical measurement uncertainty under typical workshop conditions for the M201.135. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Internal Groove Caliper 0.05mm Vernier Matt Chrome INOX With Locking Screw In Case - Metav IndustryLine
Compact precision and robust workshop performance merge in this internal‑groove caliper: with a 0.05 mm vernier reading and a 10–160 mm measuring range, it delivers repeatable results for everyday metrology tasks. Combine precise resolution, stainless‑steel construction and a locking screw for secure readings — order via Metav Werkzeuge or contact our consultants for application advice. M201.134 — Internal‑groove caliper, 10–160 mm, 0.05 mm graduation The M201.134 is an analogue caliper designed for precise measurement of internal grooves and recesses in standard workshop and production environments. Precise 0.05 mm nonius reading Designed for internal groove measurements Matt chrome finish, stainless steel construction Integrated locking screw for secure readings Repeatable groove measurement with reliable resolution The analogue vernier provides a 0.05 mm graduation that supports clear, tactile readings, making the instrument suitable for quality checks where visual confirmation is preferred over digital displays. With a nominal accuracy of 0.1 mm, this caliper balances affordability and functional performance for routine metrology. The 10–160 mm range places it in the standard class of workshop calipers, offering a practical compromise between reach and stiffness for typical machine‑shop and metal‑working tasks. Corrosion‑resistant build for everyday workshop use Constructed from stainless steel (INOX) with a matt chrome finish, the instrument resists oils and light corrosion while preserving smooth sliding action. A 25 mm jaw length gives the measuring faces the necessary reach for many groove geometries without sacrificing stability. The integrated locking screw secures measurements during transfer to documentation or subsequent machining steps, reducing the risk of reading drift and improving process reliability on the shop floor. Ergonomic handling and straightforward functionality As an analogue instrument, the caliper offers immediate feedback and a familiar feel for operators who prefer mechanical gauges. The vernier scale and secure clamping provide consistent contact pressure and repeatable results across a series of measurements, supporting efficient in‑process control. Suited to internal groove inspection and related recess measurements, this tool is a pragmatic choice where a compact, robust instrument is required for repetitive tasks in production and maintenance environments. For reliable internal‑groove measurement and practical workshop supply, contact Metav Werkzeuge in Emmerich for tailored advice or to arrange procurement. Technical Data Article number: M201.134 GTIN: 4054469100654 ECLASS: 21170344 Tariff number: 90173000 Facts Measuring range: 10–160 mm Graduation: 0.05 mm Nominal accuracy: 0.1 mm Jaw length: 25 mm Special features Material: stainless steel (INOX) Finish: matt chrome Locking screw for secured readings Analogue vernier caliper Intended use: internal groove measurement FAQ What measuring range does this caliper cover? The instrument covers a measuring range of 10–160 mm, making it suitable for standard workshop tasks and groove measurements. What reading resolution and accuracy can be expected? The vernier scale provides a 0.05 mm graduation; the caliper is specified with a nominal accuracy of 0.1 mm, offering reliable repeatability for routine checks. Is the caliper corrosion resistant? Yes — the tool is made from stainless steel (INOX) and finished in matt chrome to improve resistance to oils and light corrosion in workshop environments. Does the instrument include a locking mechanism? An integrated locking screw is provided to secure measurements for transfer and documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
170mm Digital Internal Caliper With Preset, Stainless Hardened Steel, 0.01mm Resolution, Case - Metav IndustryLine
Take advantage of the combination of workshop‑grade robustness, precise 0.01 mm digital resolution and handy RB 5 data output to streamline inspection routines; the hardened stainless‑steel construction and supplied protective case support repeatable results and safe transport. Order the Digital internal caliper M240.031.N directly via Metav Werkzeuge or consult our experts for application advice. Digital internal caliper M240.031.N — 22–170 mm, hardened stainless steel, 3 V A Digital internal caliper M240.031.N designed for precise internal and groove measurements in workshop and quality‑control environments, offering factory‑standard delivery and straightforward data transfer. Precise 0.01 mm digital resolution Hardened stainless‑steel construction Measuring range 22–170 mm for standard tasks RB 5 data output for process logging Supplied in protective case Faster, more reliable internal measurements for production control The electronic readout with a resolution of 0.01 mm (≈ 0.0005 in) delivers clear numeric values that reduce interpretation errors and speed up routine inspections. The integrated SET and P+/P‑ functions allow quick preset and incremental adjustments, enabling consistent zeroing and repeated comparative checks. This analytic clarity benefits inspection teams by shortening cycle times and lowering the risk of rework through more reliable measurement records. Built for everyday workshop use: stainless, hardened and transport‑ready Constructed from hardened stainless steel with a metal housing, the instrument resists shopfloor wear and maintains stiffness across the 22–170 mm range, which classifies it as a standard caliper for general machine‑shop and metalworking tasks. A measured jaw length of 36 mm supports secure internal contact for grooves and bores, while the supplied protective case ensures safe transport and storage. These features combine to protect calibration status and extend service life in demanding environments. Integrates with digital workflows and simplifies traceability Equipped with RB 5 data output and powered by a 3 V cell with preset capability, the instrument links measurement tasks to data‑collection systems for statistical process control or digital logging. The compact display with ON/OFF and function keys provides practical operation during inspection runs and the lightweight construction (~0.6 kg) makes single‑operator handling easier during repetitive checks. The factory standard configuration supports consistent starting conditions for series inspection. Enquire with Metav Werkzeuge to confirm compatibility with inspection routines and to arrange delivery from our Emmerich stock Technical data SKU: M240.031.N GTIN: 4054469159898 Label: Digital internal caliper, 22–170 mm, 3 V with preset, INOX, factory standard Manufacturer: Metav IndustryLine Core measurements Measuring range: 22–170 mm Resolution: 0.01 mm Resolution (inch): 0.0005 in Weight: 0.6 kg Jaw length: 36 mm Features Digital display with ON/OFF, SET, P+, P‑ Data output: RB 5 Material: hardened stainless steel, metal housing Supplied in protective case for transport Factory standard delivery FAQ What internal dimensions can be measured with this caliper? The caliper measures internal diameters and groove widths within its 22–170 mm range; the Digital internal caliper M240.031.N is optimised for standard workshop components. Is the caliper suitable for repeated shopfloor use? Yes, the hardened stainless‑steel construction and metal housing make the instrument durable for everyday use, and the supplied protective case reduces transport and storage risks for the M240.031.N. How precise is the digital readout and how is data exported? The display reads to 0.01 mm (≈ 0.0005 in) and supports RB 5 data output for connection to data‑collection systems or SPC workflows. Does the instrument come ready for immediate measurement? The tool is supplied to factory standard with preset functionality and a 3 V power system; initial setup is straightforward for measurement tasks. Which workshop applications suit this caliper best? With its 22–170 mm range and robust build, it serves general machine‑shop quality control, jigs and fixtures inspection, and routine internal or groove measurements. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
170mm Digital Internal Caliper With Stem, Preset, Stainless Steel, Plastic Case - Metav IndustryLine
Take advantage of the combination of reliable standard-range measurement, a dedicated probe for internal grooves and user-friendly digital presetting for smoother inspection routines — order the instrument directly via Metav Werkzeuge or consult our technical advisers for tailored advice. Digital Internal Caliper M240.041.N — 20–170 mm range, probe, stainless hardened steel (Metav IndustryLine) The Digital Internal Caliper M240.041.N is a workshop-ready stainless steel digital caliper designed for precise internal and groove measurements across machine shops and production benches. Digital display with preset function Measurement range 20–170 mm Hardened stainless steel construction Probe for internal groove measurement Reliable standard-range measurement for everyday workshop tasks The instrument is a Standard‑class caliper with a measurement range of 20–170 mm, offering the best compromise between reach and rigidity for general machining and metalwork. Its 0.01 mm display resolution corresponds to typical digital calipers used in production control, enabling repeatable internal measurements and simple comparison checks. Built to a factory norm, the device features a compact probe that facilitates groove and internal slot measurement while preserving jaw stiffness for consistent results. Practical digital functions that accelerate inspection work Equipped with an electronic display including ON/OFF and ZERO/PRESET controls, the caliper reduces setup time for repetitive tasks and supports quick reference measurements. The preset function simplifies transfer of a master dimension, cutting adjustment cycles on the shopfloor. A dedicated data output (RB 5) provides an option for traceable measurement recording where a digital link to SPC systems is required. At around 0.5 kg, the instrument balances robustness with ergonomic handling and is supplied in a transport case for safe storage and workshop mobility. Built for durability and consistent production quality Constructed from stainless hardened steel with a metal housing, the tool resists workshop wear and maintains measurement integrity under frequent use. The probe design is particularly suited to internal notches and grooves common in fixtures and assemblies, reducing the need for improvised gauges. Delivered to the Metav quality standard and tested for practical use in industry, this caliper supports lower rework rates and steadier quality inspection throughput — aligning with Metav’s emphasis on accessible precision for workshops and small industrial operations. For internal measuring tasks that require repeatability and a dedicated probe, contact Metav Werkzeuge for guidance on the Metav IndustryLine Digital Internal Caliper; technical consultants at Metav Werkzeuge can advise on suitability and delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M240.041.N GTIN: 4054469159959 Category: Calipers / Measuring instruments Facts Measurement range: 20–170 mm Resolution: 0.01 mm Weight: 0.5 kg Commodity code: 90173000 Special features Hardened stainless steel construction Metal housing Probe for internal groove measurement Digital display with ON/OFF and ZERO/PRESET buttons Data output: RB 5 Supplied in a transport case Factory standard compliance FAQ What measurement range does the caliper cover? The caliper covers an internal range of 20–170 mm, making it a standard workshop instrument for most internal and groove measurements. What display resolution is provided and how precise are readings? The instrument features a 0.01 mm digital resolution, suitable for production control and routine dimensional checks. Is the device suitable for measuring internal grooves and slots? Yes. The caliper is supplied with a probe designed specifically for internal groove measurement, improving accessibility and repeatability in such applications. Does the caliper offer data output for documentation or SPC? The caliper includes an RB 5 data output for digital data transfer, enabling integration with data-collection workflows where required. Is the caliper delivered ready for workshop use and how is it supplied? The caliper is delivered with a metal housing and is supplied in a transport case to protect the instrument during storage and transport. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1800mm Digital Precision Caliper Colour 2.4" Touchscreen Wireless USB ISO 17025 Calibrated - Microtech Metrology
Benefit from an extra‑long measuring range and integrated data transfer to keep large‑format inspection efficient and traceable; the combination of a 1,800 mm reach and ISO 17025 calibration ensures reliable, reproducible results for production environments. Order the digital caliper directly via Metav Werkzeuge or consult our specialists for specification guidance. Digital Caliper — Extra‑long 1,800 mm range · Colour 2.4" touchscreen (Microtech Metrology) The digital caliper is a long‑range measuring instrument intended for workshop and production measurement tasks, combining a tablet‑style colour touchscreen with wireless and USB data output for streamlined inspection workflows. Extra‑long 1,800 mm measuring range Colour 2.4" touchscreen with tablet feel Wireless and USB data output for integration Supplied calibrated to ISO 17025 Confident large‑format measurements with traceable accuracy For measurement tasks that extend beyond standard workshop gauges, the 1,800 mm measuring range moves this instrument into the long‑range class (1,000–2,000 mm), which is suited to large components without compromising handling. The extended 600 mm jaw length supports secure clamping of long workpieces while the aluminium construction keeps the overall mass manageable and reduces operator fatigue. Supplied with an ISO 17025 calibration certificate, the caliper arrives ready for use in quality control routines where traceability and documented uncertainty are required. This reduces the administrative effort during audits and ensures measurement results are accepted across suppliers and customers. Fast digital workflows and reduced transcription errors Integration into digital inspection systems is handled via the unit's wireless and USB data outputs, enabling direct transfer of values into SPC software or spreadsheet records and eliminating manual transcription. The 2.4" colour touchscreen provides a clear, responsive readout and simple menu navigation, while the display resolution of 0.01 mm supports standard workshop tolerancing and routine dimensional checks. Together, these features speed up batch inspections, shorten cycle times and improve data integrity in serial production or incoming goods inspection. Robust design for day‑to‑day production use Designed for regular use in machine shops and fixture workshops, the instrument combines workshop durability with measurement convenience. The robust profile and aluminium frame balance stiffness and portability, permitting repeatable measurements across the full measuring length. The tablet‑style interface and integrated data outputs simplify operator training and make the gauge a practical choice for both quality departments and shopfloor measurement stations. Microtech Metrology's focus on industrial metrology ensures component quality and long‑term serviceability, supporting continuous production demands. Contact Metav Werkzeuge for a technical consultation about integrating this Microtech Metrology digital caliper into existing inspection processes and to request the calibration documentation. Technical Data SKU: 142418462 GTIN: 4061905455537 Manufacturer: Microtech Metrology Facts Measuring range: 0–1,800 mm Jaw length: 600 mm Display resolution: 0.01 mm Stated accuracy: 0.1 mm Special features Colour 2.4" touchscreen Wireless and USB data output Aluminium construction Digital display Supplied calibrated to ISO 17025 FAQ What is the maximum measuring range of the digital caliper? The maximum measuring range is 0–1,800 mm; the instrument is classified as a long‑range caliper suitable for large components. Does the product include a calibration certificate? Yes, the digital caliper is delivered with an ISO 17025 calibration certificate, confirming traceability and documented measurement uncertainty. How are measurements transferred to inspection software? Measurements can be transmitted via the wireless interface or the USB data output, allowing direct integration with SPC systems and spreadsheets. What display resolution and accuracy can be expected? The display provides a resolution of 0.01 mm; the product datasheet lists a stated accuracy of 0.1 mm for the supplied unit. Which materials and environments is the caliper designed for? The caliper features an aluminium frame for a balance of stiffness and portability and is designed for regular use in workshop and production environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
1800mm Precision Digital Caliper Colour 2.4" Touchscreen Wireless/USB ISO 17025 Calibration - Microtech Metrology
Combine the 1,800 mm measuring range, wireless + USB data output and ISO 17025 calibration for dependable, reproducible large‑format inspection. Order the digital caliper directly via Metav Werkzeuge or contact our consultants for specification advice. Digital Caliper 1,800 mm — Microtech Metrology, 2.4" Colour Touchscreen The Digital Caliper 1,800 mm is an extra‑long aluminium caliper designed for large‑format dimensional control in workshop and production environments, featuring a colour touchscreen and wireless/USB data transfer for streamlined measurement workflows. 1,800 mm measuring range for large components 2.4" colour touchscreen for clear readout Wireless and USB data output for process integration ISO 17025 calibrated with certificate included Robust aluminium construction with 400 mm jaws Measure large components reliably and efficiently The extra‑long construction provides a 1,800 mm measuring range, classifying this instrument as a Long caliper (1,000–2,000 mm) suited to oversized parts such as large housings, shafts and fixtures. The extended jaw geometry and reinforced bar are engineered to preserve profile stiffness over the entire span, which reduces deflection and supports repeatable results during handling. Combining reach with a carefully selected aluminium profile keeps the unit manageable while retaining the rigidity required for production use. Capture and integrate measurement data without interruption Equipped with wireless and USB data output and a 2.4" colour touchscreen, the device enables fast visual checks at the machine and direct digitised logging into inspection systems. Wireless transfer reduces the risk of transcription errors; USB maintains a reliable wired option for workstation connection. These features optimise throughput by shortening the time between measurement and quality documentation, supporting automated data capture workflows and improving traceability in serial production. Calibrated precision and traceability you can rely on The instrument is supplied fully calibrated to ISO 17025, and is delivered with an official calibration certificate, ensuring traceability for in‑house quality assurance and audit compliance. The specified resolution of 0.01 mm provides fine graduations for dimensional control, while the listed accuracy of 0.08 mm should be interpreted as the device’s specified deviation under defined conditions; calibration verifies this performance for the delivered unit. This combination of calibration and documented performance is particularly valuable where documented measurement uncertainty is required. Designed for practical workshop handling and long‑term use Lightweight aluminium construction balances the need for a long measuring range with manageable handling, and the 400 mm jaw length supports both external and internal measurements on larger features. The coloured touchscreen simplifies reading and settings adjustments, which helps to reduce operator error during repetitive tasks. Built for production environments, the caliper integrates the convenience of digital display with the robustness expected from industrial measuring tools, making it suitable for measurement stations in assembly, tooling and inspection. Contact Metav Werkzeuge to configure the ideal extra‑long digital caliper for large‑format inspection, request the ISO 17025 calibration certificate and confirm integration options for existing data systems. Technical Data Article number: 142418442 GTIN: 4061905455520 Manufacturer: Microtech Metrology Facts Measuring range: 0–1,800 mm Resolution: 0.01 mm Specified accuracy: 0.08 mm Display: 2.4" colour touchscreen Jaw length: 400 mm Data output: Wireless and USB Special features Material: aluminium Digital operation with clear colour readout ISO 17025 calibrated, certificate included Classified as Long (1,000–2,000 mm) for large components Suitable for workshop and production inspection tasks FAQ What measuring range does this caliper cover? The caliper covers a measuring range of 0–1,800 mm; the extra‑long span is intended for large components and fixtures. Is the instrument delivered with calibration documentation? Yes, the Digital Caliper from Microtech Metrology (SKU 142418442) is supplied calibrated to ISO 17025 and includes the official calibration certificate. Which data outputs are available for process integration? Data transfer is available via wireless connection and USB, enabling both mobile logging and direct workstation integration. What resolution and stated accuracy can be expected? The device offers a 0.01 mm resolution with a specified accuracy of 0.08 mm as provided by the manufacturer’s data and confirmed at delivery through calibration. What materials is the caliper made from and how does that affect handling? The caliper is manufactured from aluminium, balancing stiffness for long spans with manageable weight for single‑person handling in the workshop. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
186x96x53mm DataMet Desktop Two-Button Mobile Control Unit Rechargeable Li‑Pol 2000mAh IP40 - Microtech Metrology
Take advantage of a compact, wireless two‑button control that combines effortless ZERO setting with direct data saving to instrument memory or the Microtech MDS application; its rechargeable Li‑Pol 2000 mAh battery and desktop or mobile variants support uninterrupted production routines. Order directly via Metav Werkzeuge or consult our specialists for integration advice. DataMET DESKTOP multifunctional desktop control — two‑button interface with rechargeable Li‑Pol battery (2000 mAh) by Microtech Metrology DataMET DESKTOP is a compact multifunction control unit for industrial metrology, designed to set a precise zero and store measurement results to Microtech instruments or the MICROTECH MDS app for Windows as a desktop two‑button panel. Two‑button interface for ZERO and save Rechargeable Li‑Pol 2000 mAh battery Desktop and mobile (2‑button stick) variants Streamlined recording for faster measurement workflows The unit acts as a dedicated wireless input for metrology systems, reducing manual entry and speeding routine checks. With direct saving to an instrument’s internal memory or synchronisation with the MDS app for Windows, the interface removes steps between capture and documentation. This results in fewer process interruptions, clearer traceability and a measurable gain in throughput for quality control stations and production test benches. Precise zeroing and dependable data transfer A short, two‑button operation provides both a ZERO setting and an immediate save command, designed for repeatable results during batch inspections or single‑part checks. The device features an LED status indicator to confirm successful synchronisation or stored events. These elements combine to lower the risk of operator error while ensuring measurement records are consistently captured in the chosen destination. Integration flexibility for workshop and lab environments Available as a desktop panel or a mobile two‑button stick, the control unit fits different workflows without changing measurement procedures. Custom functions can be implemented on request to match specific instrument protocols or a lab’s data flow. The compact interface supports simple embedding into existing test setups and is compatible with Microtech instruments and the MICROTECH MDS Windows application for centralised data handling. Compact format with sustained operation Measuring 186 x 96 x 53 mm and weighing approximately 0.40 kg, the controller keeps the footprint small on crowded benches. The rechargeable Li‑Pol 2000 mAh battery provides extended runtime for uninterrupted shifts, and the 60 mm button size delivers clear, tactile feedback for repetitive use. Together, these design choices favour reliable daily operation and easy handling during long inspection cycles. Contact Metav Werkzeuge for advice on integrating Microtech Metrology control units into existing measurement chains and to discuss customised function options — info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 299900013 Label: DataMET DESKTOP Manufacturer: Microtech Metrology Facts Buttons: 2 Battery capacity: 2000 mAh Button size: 60 mm Dimensions: 186 x 96 x 53 mm Weight: 0.40 kg Special features Function: ZERO setting and data saving to instrument memory Connectivity: Synchronisation with MICROTECH MDS app for Windows Variants: Desktop 2‑button panel; mobile 2‑button stick LED status indication Rechargeable Li‑Pol battery Custom functions available upon request FAQ How does the controller save measurement data? The controller performs direct saving either to the connected Microtech instrument’s memory or via synchronisation to the MICROTECH MDS app for Windows, ensuring recorded values are stored where required. Is the device available in a mobile version? Yes, a mobile two‑button stick variant is offered alongside the desktop 2‑button panel for flexible placement and handheld operation. What feedback confirms a successful zero or save action? An LED status indicator on the unit signals successful zeroing and data transfer operations, providing immediate visual confirmation. How long does the battery last between charges? The unit uses a rechargeable Li‑Pol 2000 mAh battery designed for extended operation; actual runtime depends on usage and synchronisation frequency. Can custom functions be implemented for specialist workflows? Custom functions are available on request to tailor the control behaviour to specific instrument protocols or data‑flow requirements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2-20mm Thread Measuring Attachment 30° Tr Pitch Gauge Set, 12 Pieces - Microtech Metrology
The set of interchangeable 30° measuring inserts for thread inspection delivers consistent, repeatable results across a thread range of 2–20 mm while simplifying on‑tool changeovers. Take advantage of compact probe geometry, modular handling and traceable identification; order directly via Metav Werkzeuge or consult their technical advisers for compatibility and supply. Measuring attachment — TR 30° thread measurement, 2–20 mm | Microtech Metrology The measuring attachment is a modular set of 30° probe inserts designed for precise inspection of threads from 2–20 mm, suited to metrology benches and inspection fixtures in industrial workshops Thread range 2–20 mm 30° probe tip geometry Set of 12 interchangeable inserts Precise thread inspection for metrology Precise thread checks with compact probe geometry The 30° probe tip geometry is engineered for reliable contact with flank forms while keeping the measuring head compact. With a declared thread range of 2–20 mm, the attachment supports inspection of small to medium thread forms without compromising accessibility in confined fixtures. The compact design reduces probe overhang and helps maintain repeatability by lowering lever effects during measurement, which translates into fewer reworks and improved process reliability. Modular set reduces machine downtime and speeds workflows Delivered as a set of 12 interchangeable inserts, the system allows swift replacement of worn tips or rapid configuration changes between batch runs. The modular concept minimises fixture downtime and simplifies inventory handling, because identical insert geometries can be stocked and exchanged quickly. Traceable markings on each insert and the central SKU aid in process documentation and ensure that measurement routines remain consistent across shifts and operators. Documented identification and workshop integration The attachment is supplied with clear identification (GTIN and SKU) for inventory and traceability, facilitating integration into existing inspection protocols. The combination of compact tip geometry and a standardised set format supports straightforward mounting on common metrology fixtures and thread gauges. Technical documentation and compatibility details are available to support device selection and to align the component with quality assurance workflows. Contact Metav Werkzeuge for delivery and technical advice on integrating Microtech Metrology measuring attachments; Metav Werkzeuge can advise on suitability for specific inspection systems and ensure prompt supply from their Emmerich quality centre. Technical data Article number: 141377300T GTIN: 4061905458675 Manufacturer: Microtech Metrology Pieces per set: 12 Numbers Thread range: 2–20 mm Tip angle: 30° Pieces per set: 12 Special features Set of interchangeable measuring inserts Designed for thread measurement applications SKU included for traceability FAQ What thread sizes can be inspected with this attachment? The measuring attachment covers threads from 2–20 mm, making it suitable for small to medium thread inspection tasks in workshop and production environments. How is the product supplied and what is included? The product is supplied as a set containing 12 interchangeable inserts intended for thread measurement; the set is identified by SKU 141377300T (Microtech Metrology). What is the tip geometry and why does it matter? The probes use a 30° tip geometry, which is selected to make accurate flank contact while preserving accessibility in confined measurement setups, supporting repeatable readings. Can this attachment be used with standard metrology fixtures? Yes, the design is intended for straightforward integration with common metrology benches and inspection fixtures; refer to the technical documentation for specific mounting interfaces. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2-40mm Digital Five-Point Pocket Caliper Stainless Hardened Steel, 0.01mm Resolution, With On/Off mm/inch/Set Buttons, In Case - Metav IndustryLine
Take advantage of precise five-point checks, compact handling and a clear digital readout for efficient inspection workflows; order directly via Metav Werkzeuge or request specialist advice from our consultants. Digital Five-Point Pocket Caliper M240.142 — compact stainless steel caliper with digital display and 2–40 mm range (Metav IndustryLine) The Digital Five-Point Pocket Caliper M240.142 is a compact measuring instrument designed for rapid five-point inspection of small components and multi-edged tools in workshop and inspection environments Five-point measurement for multi-surface checks Measuring range 2–40 mm for small components Stainless hardened steel construction Digital display with mm/inch and SET button Precision where small dimensions decide quality The instrument combines a dedicated five-point measurement geometry with a 0.01 mm display resolution to deliver repeatable checks on polygonal and multi-flank features. This arrangement reduces the need for multiple setups: a single instrument captures several contact points to verify diameters and concentricity quickly. The compact contact heads are beneficial when handling small cutters, inserts or precision parts where dimensional certainty prevents downstream rework and scrap. Robust, compact design for everyday workshop use Engineered from stainless hardened steel, the caliper balances corrosion resistance and stiffness in a pocket-sized format that suits bench and mobile inspection tasks. With a 2–40 mm measuring span it fits the class of a micro caliper, offering the right trade-off between reach and torsional rigidity for fine‑mechanical work. The hardened beam and wear-resistant jaws extend service life under frequent use and contribute to a stable measuring baseline in production environments. Fast digital operation to speed up quality control The clear digital display includes mm/inch switching, an on/off function and a SET button for zeroing, enabling quick comparison measurements and simple data capture steps during inspection rounds. Readability at 0.01 mm supports standard workshop tolerances and helps to streamline sampling without elaborate fixtures. The five-point routine simplifies control of multi-edge tools by consolidating several readings into one operation, improving throughput and lowering inspection time per part. For dependable five-point checks choose the Metav IndustryLine digital pocket caliper and contact Metav Werkzeuge for tailored advice or ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M240.142 GTIN: 4054469112930 Brand: Metav IndustryLine Label: Digital-FünfpunkTaschen-Messschieber, 2 - 40 mm rostfrei, 0,14 kg Key figures Measuring range: 2–40 mm Resolution: 0.01 mm Display inch resolution: 0.0005 in Weight (as stated on label): 0.14 kg Features & materials Material: stainless hardened steel Measurement method: five-point measurement Display functions: ON/OFF, mm/inch, SET Application: five-point inspection of small components and multi-edged tools FAQ What kinds of measurements does this caliper perform? The caliper performs five-point measurements suitable for checking multiple contact points on polygonal profiles and small cutting tools; the integrated digital display provides the reading in 0.01 mm increments for consistent inspection. Is the device suitable for use in a production environment? Yes, the compact stainless hardened construction and the digital display with mm/inch switching make the instrument suitable for routine quality control and mobile inspection tasks in production. How is the caliper best used for multi-edged tools? By using the five-point measurement routine the instrument reduces setup steps: the profile can be assessed across several contact points in one sequence to detect runout and dimensional deviations efficiently. Does the caliper offer inch measurements? Yes, the display supports mm/inch switching and shows an inch resolution equivalent to 0.0005 in for cross‑unit checks. Which Metav product line supplies this caliper and how is it identified? This caliper belongs to Metav IndustryLine and is listed under article number M240.142 for ordering and inventory purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2-40mm Five-Point Caliper Matt Chrome, Stainless Steel, Supplied in Case - Metav IndustryLine
Benefit from a compact micro-range instrument that combines reproducible 0.05 mm readings, a matt‑chrome stainless‑steel finish and five‑point measurement capability for dependable checks on fine components; order the instrument directly via Metav Werkzeuge or consult Metav’s advisers for application support. 5-Point Caliper M201.132 — Micro-range 2–40 mm, matt‑chrome stainless steel (Metav IndustryLine) The 5‑point caliper M201.132 is a compact mechanical vernier caliper designed for precision checks in fine‑mechanical and watchmaking environments, offering a robust stainless‑steel build and a focused measuring range. Compact micro-range 2–40 mm for fine work Matt‑chrome stainless‑steel construction Mechanical vernier with 0.05 mm graduation Accuracy tailored to fine mechanics This micro caliper is engineered for short‑span measurements where rigidity and repeatability matter. With a measuring range of 2–40 mm and a graduation of 0.05 mm, the instrument aligns with the common industrial expectations for analogue vernier calipers and delivers industrial‑standard resolution for routine workshop quality control. The short jaw geometry reduces torsion and makes the tool well suited to delicate parts, such as micro‑components and small housings, where a stable contact and clear mechanical reading are essential. Robust finish for everyday workshop use Constructed from stainless steel (inox) with a matt‑chrome surface, the caliper resists corrosion and maintains a consistent sliding action over time. The finish reduces glare on the scale and protects against workshop contaminants, supporting reliable daily operation. The tool is supplied in a protective transport case to safeguard the instrument during storage and transit, ensuring the measuring faces remain intact and the calibration condition is preserved. Mechanical operation and five‑point inspection capability The purely analogue vernier operation avoids the need for batteries and simplifies maintenance while providing tactile feedback for controlled measurements. The five‑point measurement function enables defined checks at several contact positions, which is useful for comparative inspection tasks and quick conformity checks on small parts. For technicians accustomed to mechanical calipers, this configuration offers straightforward, repeatable readings without electronic interfaces. Practical role in inspection and small‑batch production This caliper is particularly useful in precision workshops, micro‑assembly and maintenance departments, where short‑range accuracy and durability take precedence. The combination of a compact measuring span, corrosion‑resistant material and simple vernier operation makes it an efficient instrument for incoming inspection, jig checks and frequent go/no‑go assessments. Metav IndustryLine supplies this tool as part of a broader range aimed at democratising precision across small and medium‑sized operations. Contact Metav Werkzeuge in Emmerich to discuss how the Metav IndustryLine 5‑point caliper (M201.132) fits specific inspection tasks and to arrange supply or technical advice Technical Data Article number: M201.132 GTIN: 4054469100647 eClass: 21170329 Core specifications Measuring range: 2–40 mm Minimum range: 2 mm Maximum range: 40 mm Resolution / graduation: 0.05 mm Type: Analogue mechanical vernier Special features Material: stainless steel (inox) Finish: matt chrome Application: five‑point measurement Supplied in a protective transport case Category: Caliper (Messschieber) FAQ What measuring range does this caliper cover? The measuring range covers 2–40 mm, which places the instrument in the micro‑range for fine mechanical work. How precise is the reading on the scale? The mechanical vernier provides a graduation of 0.05 mm, matching common industrial expectations for analogue calipers. Is the caliper suitable for workshop use and transport? Yes. The stainless‑steel construction with matt‑chrome finish and the supplied protective transport case make it robust for daily workshop handling. Does the caliper require batteries or electronic maintenance? No. The instrument is a mechanical vernier caliper and operates without batteries or electronic components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20 mm Bore Distance Measuring Insert 60° Length 70 mm, For Caliper Adapter - Metav IndustryLine
Compact, precise and workshop-ready: the insert for 20 mm bore spacing at 60° with a 70 mm insertion length enables reproducible checks of hole patterns and straightforward adapter fitment — order the component via Metav Werkzeuge or consult our specialists for compatibility. Bore-spacing measuring insert 20 mm — measuring insert for caliper adapter, 60°, 70 mm length (Metav IndustryLine) Bore-spacing measuring insert 20 mm for caliper adapter — a compact metrology accessory tailored to check hole centres and angular offsets on small assemblies with a rigid 70 mm reach For Ø20 mm bore spacing at 60° 70 mm insertion length for extended reach Ø5 mounting shank for standard adapters Lightweight 0.05 kg for easy handling Reproducible bore-centre checks for small assemblies This measuring insert turns a standard caliper adapter into a dedicated tool for verifying 20 mm bore spacing at 60°, providing a quick and repeatable method to confirm hole patterns without bespoke fixtures. The accessory is designed for straightforward alignment with an adapter, so typical inspection tasks in quality control or assembly become more efficient. By avoiding improvised gauging solutions, production checks gain in repeatability and throughput, while measurement uncertainty is reduced through consistent mechanical fit. Compact design that reaches where it matters With a 70 mm insertion length and an Ø5 mounting shank, the component offers access into recesses and across small assemblies while remaining simple to handle. The modest mass (0.05 kg) contributes to easy mounting and minimal loading on the caliper adapter, keeping the measuring chain stable during manual checks. The compact form factor is especially useful in bench-level inspections and during set-up of jigs where a slim, rigid probe is preferable to larger instruments. Practical fitment and workshop applications Suited for use with caliper adapters that accept an Ø5 shank, this insert is a practical addition for workshops and inspection benches that perform repeated hole-centre verifications. Typical applications include component incoming inspection, prototype checks and fast in-line spot checks where a dedicated gauge would be impractical. Metav IndustryLine supplies this accessory as part of a broader range that aims to make high-quality metrology accessible for the workshop environment, supporting reliable supply and transparent order handling from Emmerich. Contact Metav Werkzeuge to confirm adapter compatibility or to request delivery from our Emmerich warehouse; our specialists will advise on integration and availability Technical information Article number: M240.324 GTIN: 4054469159560 ECLASS: 21170324 SKU: M240.324 Core data Length: 70 mm Weight: 0.05 kg Mounting diameter: Ø5 Analog: yes Special features For Ø20 mm bore spacing at 60° For caliper adapter (20 mm) Category: Measuring devices / Accessories Tariff number: 90178090 FAQ What bore spacing and angle does the insert check? The insert is designed for a 20 mm bore spacing at 60°, enabling direct verification of that hole pattern. Which mounting interface is required for use with adapters? The component uses an Ø5 mounting shank and is intended for caliper adapters that accept that diameter. Is the insert suitable for handheld caliper inspections? Yes — the lightweight design (0.05 kg) and 70 mm reach make it appropriate for bench and handheld checks when used with a compatible adapter. Can this insert be used with analogue calipers? The accessory is compatible with caliper adapters for analogue and digital calipers, provided the adapter accepts an Ø5 shank and the caliper provides stable seating. What is the article number or SKU for ordering? The article number and SKU is M240.324 for ordering and stock reference. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20-1020mm Digital Precision Caliper With Wireless Output, Swiss Digit Display 11mm, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a robust, long-range measuring instrument that combines wireless data output, an IP67-protected build and ISO 17025 calibration for dependable traceability on large components; order directly via Metav Werkzeuge or consult the Metav team for application advice. Microtech Metrology digital caliper — 20–1,020 mm, Wireless, IP67 The Microtech Metrology digital caliper is a long-range, workshop-grade measuring instrument designed for precise inspection of large assemblies and fixtures in production and toolmaking. Wireless data output IP67 dust and water protection ISO 17025 calibration certificate included Measuring range 20–1,020 mm Measure large components with reproducible accuracy A measuring range of 20–1,020 mm places this instrument in the long-range category, engineered to handle large components while limiting measurement uncertainty due to deflection. The extended span suits inspection of sizable housings, fixtures and long shafts where reach and repeatability matter. The supplied measurement cones Ø20 mm and Ø35 mm adapt the jaws for bore and stepped measurements, making the caliper versatile for inside and outside dimensions as well as stepped features. Capture data quickly and integrate with quality systems Equipped with a Swiss Digit display (height 11 mm) for clear readout, the caliper offers resolution 0.01 mm and an accuracy ±0.04 mm, enabling efficient digitisation of routine checks. The wireless data output simplifies transfer to inspection software or SPC systems, reducing transcription errors and accelerating documentation. For production environments this means fewer manual entries, faster batch reports and an overall improvement in process control. Built for the shop floor — robust and easy to handle An IP67 rating ensures the instrument withstands dust, coolant splash and the hazards of everyday workshop use. The sealed electronics and rugged slider enable reliable operation in less-than-ideal conditions, while the long-format design follows light-construction principles to keep deflection manageable during handling. The result is a durable metrology tool that remains serviceable over repeated use and transport. Traceable calibration for audit-ready measurement This instrument is delivered fully calibrated with an ISO 17025 calibration certificate, providing traceability for internal QA and external audits. The certificate documents measurement conformity and simplifies acceptance into inspection routines; it also reduces initial setup time for laboratory and production acceptance. For supply chains that demand documented proof of measurement capability, the calibrated instrument supports quality assurance and supplier validation processes. Contact Metav Werkzeuge for a tailored consultation on how Microtech Metrology long-range digital calipers with ISO 17025 calibration can be integrated into inspection workflows — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 141731014 GTIN: 4061905452604 Manufacturer: Microtech Metrology Display: Swiss Digit, height 11 mm Data output: Wireless Accessories: Measurement cones Ø20 mm and Ø35 mm Facts Measuring range: 20–1,020 mm Resolution: 0.01 mm Accuracy: ±0.04 mm IP rating: IP67 Special features ISO 17025 calibration certificate included Long-range caliper category (≥1,000 mm) Digital readout for fast measurement capture Suitable for workshop and production environments FAQ What is the measuring range of the instrument? The measuring range is 20–1,020 mm for the Microtech Metrology digital caliper (SKU 141731014), suitable for large components and assemblies. Is a calibration certificate supplied with the caliper? Yes, the caliper is supplied fully calibrated with an ISO 17025 calibration certificate, enabling traceability for quality assurance. How precise is the digital readout? The instrument offers a resolution of 0.01 mm and an accuracy of ±0.04 mm, combining clear readout with reliable repeatability for workshop inspection. Can measurement data be transferred electronically? Yes, the caliper features wireless data output, designed to simplify transfer to inspection software and reduce manual data entry. Which accessories are included for specialised measurements? The delivery includes measurement cones Ø20 mm and Ø35 mm to extend the caliper’s capability for bore, step and specialised internal measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
20-170mm Digital Precision Caliper Colour 1.5" Touchscreen, Wireless+USB, IP54 - Microtech Metrology
The combination of high-resolution 0.005 mm measurement, Wireless + USB data transfer and IP54 protection ensures reliable results on the shop floor and in the inspection room; benefit from precise readings and straightforward data capture. Order the caliper directly via Metav Werkzeuge or consult the Metav team for application advice. Digital Caliper by Microtech Metrology — 1.5" colour touchscreen, Wireless + USB Digital Caliper is a compact precision measuring instrument for external measurements across general workshop, metalworking and quality‑control tasks. 1.5" colour touchscreen display Wireless and USB data output Measurement range 20–170 mm IP54 splash and dust protection Precision and performance tailored to common workshop needs This precision instrument covers a 20–170 mm range, placing it in the Standard class for machine and metalworking tasks where reach, stiffness and one‑hand operation must be balanced. The 0.005 mm readout gives finer resolution than typical digital calipers, reducing uncertainty in routine inspections and enabling tighter tolerance checks without moving to larger, more specialised devices. Shorter jaws and a compact carriage support repeatable contact geometry, helping to keep measurements consistent across batches. Seamless data capture that speeds quality routines Integrated Wireless and USB outputs allow immediate transfer of readings to spreadsheets or quality‑management systems, cutting transcription errors and accelerating documentation. The 1.5" touchscreen provides a clear, fast interface for zeroing, unit changes and quick checks, while the digital electronics maintain stable readings for efficient sampling. These characteristics translate into measurable productivity gains when logging part dimensions or compiling inspection reports. Robust build for everyday shop use An IP54 rating guards against dust ingress and splashing coolant or cutting fluids, extending reliable service life in workshop environments. The caliper’s 25 mm jaw length provides secure contact for typical external measurements, while the compact frame aids handling in confined set‑ups. Materials and finish are chosen for routine wear resistance; the construction focuses on reproducibility and low maintenance rather than fragile lab‑only features. Practical integration into inspection workflows The measuring tool is designed as a pragmatic interface between bench measurement and digital quality systems. With the combined data outputs and a readable colour display, the device becomes a bridge for fast traceability and batch documentation. For engineering teams and quality departments seeking a dependable measuring device for standard parts, the instrument delivers a solid compromise of accuracy, connectivity and ruggedness, helping to streamline inspection steps and reduce rework. For reliable, connected measurement solutions from our Emmerich stock, contact Metav Werkzeuge about the Microtech Metrology digital caliper (SKU 141430157) for expert advice and rapid dispatch. Technical Data Article number: 141430157 GTIN: 4061905037917 Manufacturer: Microtech Metrology Facts Measuring range: 20–170 mm Resolution: 0.005 mm Display: 1.5" colour touchscreen Jaw length: 25 mm Special features Data output: Wireless + USB Protection class: IP54 Digital device for external measurements Digital display model FAQ How accurate is the instrument for workshop inspections? The caliper from Microtech Metrology delivers a resolution of 0.005 mm, which improves repeatability for standard workshop inspections and smaller tolerance checks. Can measurements be exported to a PC or inspection software? Yes, the device supports Wireless and USB data transfer so readings can be exported directly to spreadsheets or quality‑management systems. Is the caliper suitable for use at machine benches with coolants present? The IP54 rating offers protection against dust and splashing liquids, making the instrument suitable for typical machine‑shop environments. What measurement range does the tool cover and what class is it? The instrument measures from 20–170 mm, which places it in the Standard class for everyday machine and metalworking tasks. Which manufacturer produces this caliper and what is the article number? The caliper is supplied by Microtech Metrology; the article number is 141430157 and the GTIN is 4061905037917. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
20-2020mm Digital Precision Caliper For Bore Spacing With Wireless USB, Colour 2.4" Display, IP54, ISO 17025 Calibrated - Microtech Metrology
Taking advantage of a wide measurement range up to 2020 mm, reliable Wireless + USB data transfer and full ISO 17025 calibration, this instrument supports precise, traceable inspection of large components. Order directly via Metav Werkzeuge or contact our consultants for application advice and delivery options. Digital Caliper 20–2020 mm with Wireless + USB and 2.4" colour display by Microtech Metrology The digital caliper is a long‑span measuring instrument designed for dimension checks on large components and assemblies in workshop and plant environments Wireless and USB data output Colour 2.4" display for clear readouts Delivered calibrated to ISO 17025 with certificate Measuring range up to 2020 mm Precision over extended spans for reproducible results With a measuring range from 20 to 2020 mm, this Extra‑Long caliper closes the gap between bench instruments and heavy‑duty length gauges. The specified accuracy of 0.06 mm reflects the instrument’s tolerance band and is suited to many assembly, jig and fixture tasks where centimetre‑to‑metre accuracy is required. The built‑in measurement control and a measuring force range of 1–20 N help to reduce operator variability: a consistent contact pressure makes repeated measurements more reproducible, which speeds up inspection cycles and lowers rework rates. Faster reporting and fewer transcription errors Data capture is simplified by the combined Wireless and USB outputs, allowing measured values to be transferred directly to inspection software or spreadsheets without manual entry. The 2.4" colour display gives immediate visual confirmation of values and units, reducing interpretation mistakes on the shopfloor. IP54 protection maintains readout reliability in dusty or slightly damp environments, so transfer and logging remain uninterrupted during routine production checks and audits. Ready for audit trail and quality documentation This caliper is supplied fully calibrated to ISO 17025, including a calibration certificate for traceability and quality records. That documented conformity supports supplier audits and internal quality control procedures and removes an administrative step from incoming‑inspection or first‑article reporting. The delivery also includes two measuring cones, Ø20 mm and Ø35 mm, to aid accurate bore‑to‑bore and offset measurements on shafts and housings. Workshop durability with practical handling features Designed for use with larger components, the device balances long measuring capacity and ergonomic handling to aid single‑operator workflows where feasible. The IP54 rating shields critical electronics from typical workshop contaminants, while the rugged construction sustains repeated use across production shifts. Supplied accessories and robust data interfaces support integration into existing measurement routines, making the instrument a practical choice for manufacturing, toolroom and inspection departments that require traceable long‑length measurements. Contact Metav Werkzeuge in Emmerich for tailored application advice, a copy of the calibration certificate or to arrange delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 141732017 GTIN: 4061905452420 Manufacturer: Microtech Metrology Numbers / Core Technical Data Measuring range: 20–2020 mm Accuracy: 0.06 mm Measuring force: 1–20 N Display size: 2.4 inches (colour) Protection class: IP54 Special features Digital caliper with Wireless + USB data output Delivered calibrated to ISO 17025 with calibration certificate Accessories included: measuring cones Ø20 mm and Ø35 mm Ideal for long‑length component inspection FAQ What calibration documentation is delivered with the instrument? The digital caliper (SKU 141732017) by Microtech Metrology is delivered fully calibrated to ISO 17025 and includes a calibration certificate suitable for audit and traceability purposes. Is the measuring range suitable for large components such as housings or long shafts? Yes; the instrument’s measuring range extends to 2020 mm, making it appropriate for large housings, shafts and assemblies where a caliper‑based measurement is required. How are measured values exported to inspection software? Measured values can be exported via the built‑in Wireless interface or through USB, enabling direct transfer to spreadsheets or quality management systems without manual re‑entry. What level of workshop protection does the device offer? The caliper carries an IP54 rating, providing protection against dust ingress in typical workshop conditions and splashing water, which helps maintain reliable readings on the shopfloor. Which accessories are included for specialised measurements? The delivery contains measuring cones Ø20 mm and Ø35 mm to facilitate bore and offset measurements on cylindrical components and features. What is the expected measurement uncertainty for routine checks? The nominal accuracy is 0.06 mm; actual measurement uncertainty in your process will depend on fixturing, operator technique and environmental conditions—consistent measuring force and the supplied calibration certificate help to quantify and document that uncertainty. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
20-2020mm Digital Precision Caliper Wireless Three-Point Readout, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of ISO 17025 traceable calibration, a 20–2020 mm measuring range and wireless data transfer to speed up inspection and reduce rework; order the caliper directly via Metav Werkzeuge or consult our specialists for integration advice. Digital Caliper by Microtech Metrology — Wireless, ISO 17025 calibrated, 20–2020 mm Digital Caliper is a high‑range precision measuring instrument designed for large components and traceable inspection workflows Wireless data output for digital workflows ISO 17025 calibration with certificate Wide range 20–2020 mm for large components IP67 protection for harsh workshop environments Precise, traceable measurements for production control This instrument delivers reliable measurements across a very large span, with a measuring range of 20–2020 mm that classifies it among extra‑long calipers for large components. The factory calibration is carried out to ISO 17025 standards and is supplied with a calibration certificate, which provides documented traceability for quality systems and audit trails. The stated accuracy of 0.06 mm gives a clear expectation for inspection tolerances and supports decision‑making in final inspection and incoming goods control. Integrates with digital quality systems to save time Equipped with wireless data output and a clear Swiss Digit display (11 mm digit height), the instrument is tailored to modern metrology workflows where measurement data must be captured reliably and without transcription errors. Wireless transfer reduces cycle time between measurement and logging, minimises manual input errors and accelerates statistical process control. The digital readout and remote data capture combine to improve throughput while maintaining documented measurement integrity. Robust build and accessories for workshop conditions Constructed for workshop use, the caliper features IP67 protection to resist particulate ingress and temporary immersion, making it suitable for harsher environments. Two measuring cones (Ø20 mm and Ø35 mm) are included for internal and bore‑to‑bore distance checks, expanding the tool’s usability for assemblies and large housings. The robust design supports reproducible positioning over long spans, which is essential when measuring heavy or awkward components where stiffness and handling stability matter. Practical classification and application guidance With a maximum measuring range above two metres, this caliper falls into the class intended for extra‑long measurements and large‑format parts—examples include large flanges, pipe sections and heavy castings. For workshops that need a single instrument capable of internal, external and step measurements across large assemblies, the combination of range, calibration and ruggedness makes this instrument a practical alternative to multiple specialised gauges. Contact Metav Werkzeuge to discuss how this Microtech Metrology digital caliper fits into existing inspection processes or to arrange purchase and delivery from Emmerich. Technical Data Article number: 141732014 GTIN: 4061905452314 Brand: Microtech Metrology Data output: Wireless Digital display: Swiss Digit, 11 mm IP protection: IP67 ISO 17025 calibration: included with certificate Measuring range: 20–2020 mm Accuracy: 0.06 mm Included accessories: measuring cones Ø20 mm and Ø35 mm ECLASS: 21170344 Facts Measuring range min: 20 mm Measuring range max: 2020 mm Display digit height: 11 mm Accuracy value: 0.06 mm GTIN numeric: 4061905452314 Special features Wireless data transfer for direct logging Supplied with ISO 17025 calibration certificate Ruggedised for workshop use Two internal measuring cones included Suitable for large components and assemblies Digital readout optimised for readability FAQ Is the caliper delivered with a calibration certificate? Yes. The Microtech Metrology digital caliper is delivered fully calibrated to ISO 17025 and includes the calibration certificate for traceable documentation. What measuring tasks is this instrument suitable for? This digital caliper covers internal, external and step measurements across a 20–2020 mm span, making it suitable for large housing, flange and pipe inspections where extra‑long range is required. Can measurement data be exported directly to QA software? Yes. The caliper offers wireless data output for direct capture into inspection or SPC systems, reducing manual entry and improving data integrity. What environmental protection does the instrument provide? The device is rated IP67, which protects against dust ingress and temporary immersion—suitable for many workshop environments. Are any accessories supplied for bore measurements? The caliper includes two measuring cones (Ø20 mm and Ø35 mm) to facilitate internal and bore‑to‑bore distance checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
20-220mm Digital Precision Caliper Color 1.5" Touchscreen Wireless USB IP54 - Microtech Metrology
Take advantage of a combination of high-resolution measurement, robust workshop protection and fast digital data transfer to streamline quality checks. The integrated wireless and USB outputs reduce logging time while the sturdy design and colour touchscreen keep routine measurements efficient. Order the device directly via Metav Werkzeuge or request application advice from our consultants. Digital Caliper 20–220 mm — Microtech Metrology, 1.5" Colour Touchscreen, Wireless + USB The Digital Caliper 20–220 mm is a workshop-grade measuring instrument for precise external, internal, depth and step measurements in machine shops and quality control stations. Colour 1.5" touchscreen display Wireless and USB data output Resolution 0.005 mm for fine readings IP54 splash and dust protection Precise readings within the standard workshop range Designed for the common shop lengths that balance reach and rigidity, this caliper sits in the Standard measuring class with a 20–220 mm range — ideal for general engineering and metalwork tasks where 150–200 mm sizes are typically employed. The device delivers a reading step of 0.005 mm, enabling finer discrimination than many conventional digital gauges; this improves decision-making in part acceptance and reduces rework. A compact jaw profile (25 mm length) supports access to smaller features while preserving mechanical stability during routine checks. Fast, secure data capture for traceable documentation Data transfer is handled via Wireless + USB, allowing measurement values to be transmitted directly to inspection software or spreadsheets without manual entry. The 1.5" colour touchscreen offers clear legibility and rapid mode changes, shortening cycle times in incoming inspection and production control. By reducing paperwork and transfer errors, the integrated outputs support more efficient processes and clearer audit trails, which is essential for repeatable production and quality assurance regimes. Built to endure the workshop environment Constructed for regular use, the caliper carries an IP54 rating to resist fine dust and splashes commonly encountered on the shop floor. The instrument’s controls and display are laid out for single‑hand handling and quick orientation in busy workflows. These practical features combine to lower downtime and keep measurement tasks moving — a pragmatic choice for maintenance benches and inspection rooms where robustness and uptime matter most. Practical fit for manufacturing and inspection workflows As a digital measuring tool with simple connectivity and fine resolution, this caliper bridges handheld flexibility with modern data handling expectations. It supports standard measurement tasks — external, internal, depth and step readings — while speeding data collection for process control. The combination of workshop durability, precise resolution and direct data export positions it as an efficient instrument for production-oriented metrology and routine quality control. Contact Metav Werkzeuge for targeted application advice and rapid supply of Microtech Metrology digital calipers — email info@metav-werkzeuge.com or call +49 2822 7131930 for immediate assistance Technical data Article number: 141430207 GTIN: 4061905037924 Brand: Microtech Metrology Data Measuring range: 20–220 mm Resolution (reading): 0.005 mm Display: Colour 1.5" touchscreen Jaw length: 25 mm Protection class: IP54 Special features Digital instrument (electronic display) Data output: Wireless + USB Standard-range caliper classification suitable for workshop use Suitable for external, internal, depth and step measurements FAQ Is this caliper delivered calibrated? The delivery does not include an ISO 17025 certificate by default; the Microtech Metrology digital caliper is supplied in ready-to-use condition and standard factory calibration applies unless a specific calibration option is requested. Which measurement tasks does this instrument cover? This caliper supports external, internal, depth and step measurements, making the Microtech Metrology digital caliper 20–220 mm suitable for a wide range of workshop and inspection tasks. How are measurement values transferred to a PC or inspection system? Values are transmitted via the caliper’s Wireless + USB interfaces, enabling direct logging to software or spreadsheets and eliminating manual transcription. Is the instrument robust enough for the shop floor? Yes. The IP54 rating provides protection against dust ingress and water splashes typically encountered in workshops, supporting reliable daily use. Can the caliper be used for high-precision laboratory tasks? With a resolution of 0.005 mm the caliper offers finer readings than many standard digital gauges; for submicron laboratory requirements, purpose-built high‑precision instruments would be recommended. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
20-3020 mm Digital Precision Caliper For Bore Distances With Ø20/Ø35 Probes, IP67, ISO 17025 Calibrated - Microtech Metrology
Taking advantage of an extra‑long measurement range and IP67 protection, this caliper delivers reproducible results for large components while remaining robust in workshop environments; supplied fully ISO 17025 calibrated with certificate, it is available through Metav Werkzeuge for immediate integration into production or quality control workflows. Digital Caliper by Microtech Metrology — extra‑long range, IP67 protection The Digital Caliper is an extra‑long, workshop‑grade measuring instrument for large components and assemblies, designed to combine extended reach with robust environmental protection and traceable calibration. Extra‑long 3,020 mm measuring range IP67 dust and water protection ISO 17025 calibrated with certificate Swiss Digit display, 11 mm height Reliable reach for large parts and assemblies The instrument is tailored to measurement tasks that exceed standard workshop limits: with an extra‑long measuring capacity of 3,020 mm it addresses large shafts, housings and assemblies that otherwise require multiple setups. The long beam is engineered for a balance of reach and rigidity, reducing deflection over distance and enabling more consistent readings on sizeable components. This makes the caliper suitable for heavy‑duty applications in fabrication, tooling and machine assembly where single‑pass measurements save time and reduce cumulative error. Traceable accuracy and robust readout for production use Accuracy and documentation are prioritised: the device is delivered fully ISO 17025 calibrated and includes the calibration certificate for quality records and audits. The electronic system offers a resolution of 0.01 mm while the stated accuracy is 0.07 mm, parameters that support reliable dimensional control across the instrument's range. The Swiss Digit display with 11 mm character height ensures clear readout at bench or workshop lighting levels, and the IP67 protection rating keeps electronics safe from coolant, chips and dust, extending service life in demanding environments. Practical accessories and workshop integration Practical features reduce setup time and broaden applicability: the caliper comes with measuring cones Ø20 mm and Ø35 mm, enabling precise bore and spacing checks on large parts without improvised fixtures. The instrument’s digital interface and robust housing simplify handling and storage in production contexts, while consistent mechanical design supports repeatable contact geometry. For inspection tasks that require documented traceability and resistance to shop conditions, this unit provides a ready‑to‑use solution that links long‑range capability with workshop durability. Contact Metav Werkzeuge for a specialist consultation on integrating the Microtech Metrology extra‑long digital caliper into measurement routines; our Emmerich team can advise on compatibility with existing jigs and order fulfilment via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141733013 GTIN: 4061905452581 Manufacturer: Microtech Metrology Facts Measuring range: 20–3,020 mm Min measuring range: 20 mm Max measuring range: 3,020 mm Resolution: 0.01 mm Accuracy: 0.07 mm Display height: 11 mm Special features Protection class IP67 ISO 17025 calibration certificate included Swiss Digit display Accessories: measuring cones Ø20 mm and Ø35 mm Digital caliper for extra‑long components FAQ What measurement lengths are covered by this caliper? The caliper covers a measuring span from 20 mm up to 3,020 mm, making it suitable for very large components and assemblies. Is the instrument delivered with calibration documentation? Yes, the unit from Microtech Metrology is supplied fully calibrated to ISO 17025 and includes the calibration certificate for traceability and quality records. How resistant is the caliper to shop environments? With an IP67 rating, the caliper is protected against dust ingress and temporary immersion, offering robust performance in workshops with coolants and debris. What is the display and resolution of the readout? The digital readout uses a Swiss Digit display with 11 mm characters and a resolution of 0.01 mm for clear, precise readings. Which accessories are included for bore and spacing checks? The delivery includes measuring cones Ø20 mm and Ø35 mm, facilitating bore and centre‑distance measurements on larger parts. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
20-520mm Digital Precision Caliper With Wireless Output, Swiss Digit Display 11mm, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of precise, traceable measurement with ISO 17025 calibration, robust IP67 protection and wireless data transfer for faster documentation and fewer errors — order via Metav Werkzeuge or consult our specialists for tailored integration. Precision Caliper — Digital caliper 20–520 mm, IP67, Microtech Metrology The Precision Caliper is a wireless digital measuring instrument for external, internal and depth measurements across workshop environments and inspection benches, designed for long-range checks up to 520 mm. ISO 17025 calibrated certificate included Measuring range 20–520 mm, large-range caliper IP67 dust- and water-resistant design Wireless data output for streamlined logging Traceable accuracy for quality assurance The caliper delivers an accuracy of ±0.03 mm, making it suitable for standardised quality control and production checks where reproducibility matters. Supplied with ISO 17025 calibration, the instrument arrives with a formal calibration certificate, ensuring measurement results are traceable and accepted in audit procedures. The Swiss Digit display (11 mm height) provides clear readout at the inspection bench, while the 0.01 mm reading step supports fine resolution for routine metrology. Built for tough shop-floor conditions Rated IP67, the instrument resists dust ingress and temporary immersion, which reduces downtime from accidental contamination and enables reliable use in harsher environments. The robust carriage and hardened measuring faces ensure long service life under frequent handling; the large-range design (20–520 mm) provides the reach required for sizeable components without sacrificing stiffness. This balance of durability and reach supports consistent results across daily measurement tasks. Efficient data capture and process integration Equipped with wireless data output, the caliper minimises transcription errors and accelerates data logging into inspection software or spreadsheets. The combination of clear digital readout and wireless transfer reduces paperwork, shortens inspection cycles and supports traceable batch documentation. Supplied measuring cones (Ø20 mm and Ø35 mm) extend functionality for specific bore and hole-distance checks, enabling rapid adaptation between different measurement tasks at the bench. Practical benefits for workshops and QC labs As a large-range digital caliper, the instrument is tailored to sectors that require both reach and repeatability, such as fixture assembly, housing inspection and medium-size component fabrication. The ergonomics of the slider and the readable display simplify frequent use, while the ISO 17025 certificate underpins supplier and customer confidence during acceptance. For shops aiming to modernise data flow, the wireless capability provides an immediate productivity gain, supporting faster decisions and fewer manual transcription faults. For traceable, workshop-ready measurement with ISO 17025 calibration and wireless data transfer, contact Metav Werkzeuge to arrange supply of the Microtech Metrology Precision Caliper and discuss integration into inspection routines. Technical data SKU: 141730514 GTIN: 4061905452598 Brand: Microtech Metrology Facts Measuring range: 20–520 mm Resolution (reading): 0.01 mm Stated accuracy: ±0.03 mm Protection class: IP67 Display: Swiss Digit, 11 mm height Data output: Wireless Calibration: ISO 17025 certificate included Special features Measuring cones Ø20 mm and Ø35 mm included Digital readout for external, internal and depth measurement Large-range caliper suitable for components up to 520 mm Robust construction for workshop and inspection use FAQ Is this caliper delivered with a calibration certificate? Yes. The Microtech Metrology Precision Caliper is supplied fully calibrated with an ISO 17025 calibration certificate, ensuring traceability for inspection and audit purposes. What does IP67 mean for daily use? IP67 indicates protection against dust ingress and temporary immersion, so the caliper tolerates typical shop-floor exposure to coolant mist or accidental splashes without compromising function. Can measurement data be transferred directly to inspection software? The caliper’s wireless data output enables direct transfer of measurement values to compatible systems or data loggers, reducing manual entry and speeding up documentation. Is the measuring range suitable for larger assemblies? With a measuring range of 20–520 mm, this large-range caliper covers many medium to large components and fixtures while maintaining stiffness appropriate for reliable results. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
20-75mm Three-Point Caliper Matt Chrome, Stainless Steel, 0.05mm Scale, Supplied in Case - Metav IndustryLine
Take advantage of the compact 20–75 mm measuring range combined with a matt chrome-plated stainless finish and a 0.05 mm vernier resolution for reliable, workshop-grade measurements; order directly via Metav Werkzeuge or contact their advisors for application support. 3-Point Caliper M201.131 – analogue vernier, 20–75 mm range, matt chrome-plated stainless The 3-Point Caliper M201.131 is an analogue measuring instrument designed for precise three-point measurement of small components in fine mechanical and precision engineering applications. Compact 20–75 mm measuring range Matt chrome-plated stainless finish Analogue vernier with 0.05 mm scale Delivered in a protective case for transport Accurate measurement where space is limited This caliper is built for precision within a compact envelope: the 20–75 mm measuring range places it in the micro class for fine mechanical work, making it particularly suitable where short jaws and torsion-resistant geometry matter. The mechanical vernier offers a 0.05 mm reading, aligning with the industrial standard for analogue callipers and providing a clear, verifiable basis for quality control tasks. The three-point contact arrangement supplies a defined contact geometry that improves repeatability when measuring small diameters, stepped features or narrow bosses, so users gain consistent outcomes without complex procedures. Robust construction for everyday workshop use A matt chrome-plated stainless construction combines corrosion resistance with reduced glare, improving readout visibility under bright lighting. The analogue design avoids electronic dependencies and simplifies maintenance: the scale and slider can be cleaned and checked visually, while the durable finish preserves measurement integrity in harsher shop environments. This balance of durability and low-maintenance operation supports continuous production workflows and reduces downtime associated with delicate instruments. Practical delivery and application benefits Delivered in a protective case, the instrument is workshop-ready and protected during transport or storage. Its compact format and simple mechanical operation make it suitable for bench inspection, toolroom checks, and finely detailed assembly work in sectors such as horology, small-part manufacturing and precision fixtures. The caliper’s straightforward vernier readout helps operators document measurements quickly and supports traceable inspection routines with clear numerical values that fit established quality systems. Choose the Metav IndustryLine three-point caliper for dependable small-part measurement and contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or via +49 2822 7131930 Technical data Article number: M201.131 GTIN: 4054469100630 Category: Calipers (Messschieber) Core technical figures Measuring range: 20–75 mm Minimum range: 20 mm Maximum range: 75 mm Reading / resolution: 0.05 mm Analogue (vernier) instrument Tariff number: 90173000 Special features and materials Material: stainless steel (inox) Surface: matt chrome-plated Measurement principle: three-point measurement Delivery: protective case for transport Intended use: precision fine-mechanical measurements FAQ What applications is this caliper best suited for? The three-point caliper is optimised for small-component work and fine mechanical tasks; the M201.131 excels in measuring narrow diameters, stepped features and components typical in watchmaking, small assemblies and precision fixtures. How fine is the displayed measurement and how reliable is it? The analogue vernier provides a 0.05 mm reading, which corresponds to the industrial standard for mechanical calipers and allows consistent, verifiable measurements suitable for routine workshop quality control. Is the instrument corrosion resistant and suitable for workshop use? Yes. The matt chrome-plated stainless construction offers corrosion resistance and reduced glare, making the tool robust for everyday use in production and inspection areas. Does the caliper come ready for transport and storage? The instrument is delivered in a protective case to safeguard the jaws and scale during transport and storage, ensuring it arrives workshop-ready. Who supplies this caliper and where can additional advice be obtained? The caliper is part of the Metav IndustryLine. For application guidance or further technical details, Metav Werkzeuge provides consultancy and product information. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision calipers for accurate, repeatable measurement
Calipers are the indispensable length-measuring tools for industry and workshop environments, enabling fast and exact external, internal, depth and step measurements. Our professional range of precision calipers, including vernier calipers, dial calipers and digital calipers, combines mechanical robustness with modern data handling to support consistent quality assurance.
How these calipers work and where they help most
Analogue vernier calipers deliver reliable, autarkic operation via the vernier scale and are best suited to heavy-duty workshop use where durability matters. Digital calipers provide a contrast-rich display, minimise reading errors and speed up inspection routines through functions such as zero setting and data output. At the high end, touchscreen calipers from Microtech feature an integrated microcomputer, colour touch display, built-in error-tolerance checks and wireless data transmission, making them suited for Industry 4.0 workflows. Workshop calipers with extended measuring ranges offer optional fine adjustment and rounded tips for interior measurements, while in-built calipers can be mounted directly to machines or test rigs to monitor travel. Specialty calipers cover tasks such as deep grooves, pipe wall thickness, brake disc inspection, three-point measurements and bespoke geometries.
Tangible benefits that improve production performance
- Faster throughput: digital calipers with data output reduce manual entry and accelerate quality checks.
- Higher repeatability: robust mechanical design and error-tolerance controls raise measurement consistency.
- Flexible integration: wireless data transmission and touchscreen operation simplify digitisation to existing systems.
- Reduced downtime: workshop and in-built variants with fine adjustment minimise rework and set-up time.
- Application coverage: specialty calipers adapt to complex geometries, from three-point checks to deep-niche measurements.
Microtech and metav — quality and supply you can rely on
For high-end, touchscreen-equipped instruments, Microtech represents the technological benchmark thanks to its integrated controls and wireless capabilities. As a precision partner, Metav complements this with decades of experience and a comprehensive offering: more than 250,000 products, a European quality filter in Emmerich and the trust of over 48,000 customers, making Metav a sensible central source for calipers and measuring equipment.
Quick summary
Calipers — from analogue vernier to touchscreen digital — deliver the measurement accuracy and data connectivity modern production demands while reducing inspection time and improving repeatability.
FAQ
What are the main differences between analogue and digital calipers?
Analogue vernier calipers rely on a vernier scale and are prized for ruggedness and independence from power, whereas digital calipers provide a contrast display, zero setting and data output to eliminate readout errors and speed up quality processes.
Can calipers be integrated into a digital inspection workflow?
Yes. Many digital calipers and touchscreen models support data output and wireless data transmission, enabling direct transfer of measurements into quality-management systems or statistical process control.
Which caliper type is best for large measuring ranges in a workshop?
Workshop calipers with extended measuring ranges and optional fine adjustment are designed for large components; they maintain mechanical stability and are available with rounded interior jaws for safer internal measurements.
Are there calipers for specialised geometries like deep grooves or brake discs?
Specialty calipers are explicitly engineered for such tasks. They feature tailored measuring faces for deep-niche measurements, pipe wall thicknesses, brake-disc checks and three-point or flexible geometries.
How do touchscreen calipers from Microtech improve quality control?
Microtech touchscreen calipers combine an integrated microcomputer, colour touch display and built-in error-tolerance checks with wireless data transmission, allowing immediate verification, reduced human error and seamless digitisation in line with Industry 4.0 practices.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com