Precision calipers for reliable industrial measurement
Precision calipers and their variants provide fast, repeatable outside, inside, depth and step measurements to ensure component conformity and process control on the shopfloor, combining mechanical robustness with digital data handling for traceable results. Designed for use in industrial quality assurance and manufacturing, these calipers serve applications from rough workshop environments to precision inspection, with options such as analogue vernier calipers for durable, battery‑free operation and digital calipers offering clear displays and data output to speed up quality workflows. Specialist formats, including workshop calipers with extended ranges and built‑in mounting calipers for machine or fixture monitoring, extend capability to long strokes and embedded measurement tasks, while bespoke models handle deep grooves, pipe wall thicknesses and three‑point or other complex geometries. The range emphasises highest accuracy and process integration, featuring high‑end touchscreen models with integrated microcomputers, wireless data transfer and Industry 4.0 compatibility to modernise measurement and quality data capture.
200mm Digital Caliper Antimagnetic Stainless Steel Round Depth Rod, 4‑Function Measurement, DIN 862 - Metav IndustryLine
Combine a 200 mm measuring range, non-magnetic stainless steel construction and a clear digital display for dependable workshop measurements and faster inspection routines. Order the (Digital caliper M216.176) directly via (Metav Werkzeuge) or ask our consultants if needed. 200 mm measuring range for standard workshop tasks Non-magnetic stainless construction Digital display with ON/OFF, ZERO, UNIT, HOLD Four measuring functions: inside, outside, depth, step Durable, anti‑magnetic construction for repeatable results The body is made from non-magnetic stainless steel, an advantage where magnetic interference or corrosion resistance matters for consistent readings. This robust build reduces the risk of distortion during daily use and supports long service life; combined with compliance to DIN 862, the instrument gives a reliable baseline for routine quality checks and assembly tasks. Fast readings and simple controls for efficient inspection A clear digital display with ON/OFF, ZERO, UNIT, HOLD functions speeds up pass/fail checks and reduces interpretation errors compared with analogue scales. The unit selection lets operators switch between millimetres and inches quickly, while the 3 V power supply ensures low-maintenance operation. Integrated RB 5 data output enables straightforward transfer of measured values into traceability systems or SPC workflows. Practical range and four measuring modes for universal use Classified in the Standard (100–300 mm) category, the 200 mm range covers most workshop and machine‑shop applications by balancing reach and rigidity. The instrument offers four measuring functions — external, internal, depth and step — and includes a round depth gauge for reliable measurements in recesses and stepped parts. This versatility reduces the need for multiple separate gauges during layout and inspection. Built for day‑to‑day accuracy and process integration At roughly 0.3 kg, the caliper remains handheld and manageable for repeated one‑person checks, while its design supports fast positioning and stable measurement. The digital interface and data output option help integrate the tool into documented inspection routines, increasing throughput and easing audit preparation. For workshops seeking consistent measurement data without complex setup, this instrument delivers repeatable results with minimal training. Contact Metav Werkzeuge for application advice and quick delivery of the Metav IndustryLine digital caliper M216.176 to ensure the right measuring solution for the workshop. Technical data SKU: M216.176 Manufacturer: Metav IndustryLine GTIN: 4054469168227 Tariff number: 90173000 Key measurements Measuring range: 0–200 mm Weight: 0.3 kg Jaw length: 50/24 Power: 3 V Data output: RB 5 Special features Material: non-magnetic stainless steel Antimagnetic Digital display with ON/OFF, ZERO, UNIT, HOLD Four measuring functions: external, internal, depth, step Round depth gauge included Complies with DIN 862 FAQ What measuring functions does this caliper offer? The instrument provides external, internal, depth and step measurements; the 4‑function capability is implemented on the Digital caliper M216.176 for versatile inspection work. Is the material suitable for corrosive environments? Yes, the Digital caliper M216.176 is made from non‑magnetic stainless steel, which improves resistance to corrosion compared with plain carbon steels. Can measurement data be exported to a computer? Yes, the caliper includes an RB 5 data output for transferring measured values into inspection software or data‑collection systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper for Pipe Wall Thickness Measurement Digital Readout 0.01mm, IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of high measurement fidelity, convenient data capture and robust shop‑floor protection to keep quality checks efficient and traceable; order directly via Metav Werkzeuge or consult the Metav team for tailored integration and calibration documentation. Digital Caliper — Microtech Metrology, 0–200 mm, USB, IP54 Digital Caliper for standard workshop and quality‑control applications, offering calibrated traceability and easy data export. Digital display 13 mm for clear readings USB data output for easy data transfer IP54 dust and splash protection ISO 17025 calibrated with certificate included High accuracy and documented traceability for reliable decisions The digital caliper combines a 0–200 mm measuring range with a display resolution of 0.01 mm and an accuracy of ±0.03 mm, providing a reliable basis for dimensional checks in production and inspection. The delivery includes full calibration performed to ISO 17025 standards and an accompanying calibration certificate, ensuring traceability for audits and conformity assessments. This documented accuracy reduces uncertainty in pass/fail decisions and supports consistent quality control without repeated rework. Seamless data handling and durable operation on the shop floor Equipped with USB data output and a bold 13 mm display, the instrument streamlines data capture and reduces transcription errors during batch inspections. The IP54 rating protects the electronics from dust and water splashes commonly encountered at workstations, while the measuring cone Ø 4 mm and jaw length 50 mm provide practical contact geometry for a variety of components. Together these features speed up inspection cycles and simplify integration with data‑logging workflows. Practical range and handling for everyday workshop use Classified as Standard class (measuring range up to 300 mm), the caliper strikes a balance between reach and stiffness that suits most machine‑shop tasks; the 0–200 mm span covers the universal workshop sizes while remaining easy to manoeuvre single‑handed. The construction supports repeatable measurements and straightforward operation, making this instrument a dependable choice for routine checks, incoming inspections and assembly verification without excessive bulk. Contact Metav Werkzeuge for expert advice, calibration documentation and procurement assistance for this Microtech Metrology digital caliper (SKU 141230200) via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 141230200 GTIN: 4061905457838 ECLASS: 21170344 Facts Measuring range: 0–200 mm Resolution (display): 0.01 mm Accuracy: ±0.03 mm Display height: 13 mm Measuring cone Ø: 4 mm Jaw length: 50 mm Protection class: IP54 Special features Digital display USB data output ISO 17025 calibration with certificate Standard class measuring range (0–200 mm) FAQ Is the instrument delivered with a calibration certificate? The Microtech Metrology digital caliper (SKU 141230200) is supplied fully calibrated to ISO 17025 and includes the calibration certificate with delivery. What accuracy and resolution can be expected? Resolution is 0.01 mm and declared accuracy is ±0.03 mm for the Microtech Metrology digital caliper, suitable for standard workshop and quality checks. Can measurement data be exported to a PC or data logger? Yes, the caliper features a USB data output to enable straightforward transfer of measurements to PCs or data‑collection systems. Is the device suitable for use in a busy production environment? With an IP54 rating and a clear 13 mm display, the instrument is designed for robust shop‑floor use and quick read‑outs during repetitive inspections. What makes this caliper a good fit for general workshop use? Its 0–200 mm range, compact handling and ISO 17025 traceability make the Microtech Metrology digital caliper a reliable, easy‑to‑integrate tool for routine dimensional control. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Digital Caliper Inductive System 0.01mm Resolution IP67, Data/Bluetooth, Four-Function, Hardened Stainless Steel - Metav IndustryLine
Reliable 200 mm measuring range, an inductive system and Bluetooth data output combine to deliver repeatable results and streamlined logging for production and inspection tasks. With IP67 protection and a 0.01 mm display, this caliper keeps measurements stable in workshop conditions. Order directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Digital caliper M216.187 — 200 mm, IP67, Bluetooth The Digital caliper M216.187 is a 200 mm digital measuring instrument with an inductive sensing system, intended for standard workshop measurement and quality-control tasks. Inductive measuring system (DIN 862) IP67 protection for washdown conditions Bluetooth data output for traceable records 0.01 mm resolution and mm/inch display Precision and reliability for everyday metrology The caliper uses an inductive system matched to DIN 862, offering a robust sensing principle that is less sensitive to contamination than many contact sensors. With a measuring range of 200 mm and a 0.01 mm display step, the instrument suits the Standard category of calipers commonly used in machine and metalworking environments, where reach, stiffness and one‑hand operability are balanced. The construction from hardened stainless steel and the integrated locking screw assist in keeping measurements reproducible during handling, so routine checks and batch inspections run with consistent outcomes. Seamless data transfer to speed inspection workflows Equipped with Bluetooth data output and a digital interface with mm/inch selection and MODE controls, this caliper reduces manual logging and transcription errors, supporting faster quality documentation. The wireless data stream enables direct input into measuring software or data collection systems, improving throughput in inspection routines. Traceability is strengthened when measurement values are captured electronically, helping to integrate the instrument into statistical process control and production reports without manual re‑entry. Built for workshop conditions and versatile measurement An IP67 rating and robust materials make the instrument tolerant of coolant splash and dusty environments typically found at the bench or on the shop floor. The device's modest mass (0.4 kg) and balanced jaw geometry support confident handling for inside, outside, depth and step measurements — the four-way measurement capability expands its utility across component geometries. The combination of protective design and practical ergonomics provides a dependable tool for everyday dimensional control. Contact Metav Werkzeuge for tailored advice and to secure this Metav IndustryLine 200 mm digital caliper with Bluetooth data output Technical data SKU: M216.187 Brand: Metav IndustryLine GTIN: 4054469146386 Norm: DIN 862 Facts Measuring range: 0–200 mm Resolution: 0.01 mm Resolution (in): 0.0005 in Weight: 0.4 kg Protection class: IP67 Special features Inductive measuring system Bluetooth data output Digital display with MODE, mm/inch and 0/ON/OFF Locking screw Hardened stainless steel construction Four-way measurement capability DIN 862 compliance FAQ What measurement resolution and repeatability does the caliper offer? The caliper provides a display resolution of 0.01 mm; for a 200 mm instrument the standard digital caliper accuracy reference is typically expressed with a measurement uncertainty in the same class used for workshop inspection. Is the instrument suitable for use in wet or dusty production areas? Yes, the IP67 protection rating and stainless steel construction make the device resistant to splash and ingress from dust, supporting reliable use in typical workshop conditions. Can this caliper record internal, external, depth and step measurements? Yes, the instrument supports four-way measurement (inside, outside, depth and step), which extends its usefulness across a wide range of component checks. How are measured values exported for documentation? Measured values are transmitted via Bluetooth data output and can be captured by compatible data collection or inspection software for direct documentation and traceability. Does the caliper conform to a recognised standard? The design and measuring concept comply with DIN 862, indicating adherence to the conventional specifications for calipers used in industrial metrology. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper Inductive System IP67, 0.01mm Resolution, Four-Function, Supplied in Case - Metav IndustryLine
Benefit from a rugged, shopfloor-ready caliper that combines a sealed IP67 enclosure with an inductive measuring system and centimetre-grade reach — ideal for reliable dimensional control in production. Order the device directly via Metav Werkzeuge or consult our advisors for procurement and delivery options. Digital Caliper M216.182 – 200 mm, IP67, inductive system (Metav IndustryLine) The Digital Caliper M216.182 is a 200 mm, DIN 862‑compliant measuring instrument with an IP67‑sealed inductive measuring system, designed for robust, everyday workshop and quality‑control applications. IP67 dust- and water-resistant construction Inductive measuring system for stable readings 0.01 mm resolution with mm/inch quick toggle Hardened stainless steel construction Reliable measurement on the shopfloor The sealed construction with IP67 rating protects internal electronics from coolant, dust and splash exposure, reducing downtime caused by contaminated instruments. The inductive measuring system resists signal loss from chips or fluids and offers consistent performance cycle after cycle. Classified in the Standard measuring range (0–300 mm), this 200 mm instrument balances reach and rigidity for most machine‑shop tasks, ensuring reproducible checks of components, fixtures and assemblies in daily production. Clear readouts and versatile measuring modes With a 0.01 mm display step and a quick mm/inch toggle, the instrument supports rapid conversion and high‑resolution inspection. The integrated keys (MODE, mm/inch, 0/ON/OFF) simplify workflow changes and the lock screw secures a measurement for transfer or documentation. The caliper also provides four measuring functions — external, internal, depth and step — so a single tool covers multiple checking tasks, reducing tool changes and speeding up quality routines. Robust build for long service life and traceable results Constructed from hardened stainless steel, the device resists wear and corrosion, preserving jaw geometry and measurement integrity over time. The compact digital module is designed for dependable operation while adding only around 0.4 kg of handling mass, which aids manoeuvrability during repetitious inspections. Supplied to industry tolerances under DIN 862, this instrument supports stable metrology routines; combined with Metav’s distribution, it benefits from local stock and a European quality filter that keeps logistics and spare parts straightforward. For IP67‑rated precision from Metav IndustryLine and procurement assistance from Metav Werkzeuge in Emmerich, contact sales at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss delivery and suitability for current inspection routines Technical data Article number: M216.182 GTIN: 4054469146348 Category: Calipers (digital) Core specifications Measuring range: 0–200 mm Resolution: 0.01 mm Readability (inch): 0.0005 in Protection class: IP67 Weight: 0.4 kg Jaw length: 50/24 mm Materials & features Material: hardened stainless steel Measuring principle: inductive system Standard: DIN 862 Display: digital with MODE, mm/inch, 0/ON/OFF keys Lock screw for fixed measurements Four measuring functions: external, internal, depth, step FAQ Is this caliper suitable for use near coolants and oils? Yes. The device features an IP67 enclosure and an inductive measuring system, so the Digital Caliper M216.182 is designed to withstand splashes and contaminants common on the shopfloor. What measurement resolution and accuracy can be expected? The display provides 0.01 mm resolution and a readability of 0.0005 in; the instrument conforms to DIN 862 for digital calipers in its class. Can the caliper measure inside and depth dimensions? Yes. The instrument supports four measuring functions — external, internal, depth and step — making it versatile for a range of inspection tasks. Does the caliper offer quick unit conversion? The caliper includes a dedicated mm/inch toggle for immediate conversion between metric and imperial readings. Who supplies this caliper and where is procurement handled? This product is part of the Metav IndustryLine offering and is distributed through Metav Werkzeuge with stock and logistics managed from Emmerich. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper Large LCD Display Removable Roller, Metal Body, DIN 862, ISO 17025 Calibrated Certificate, Plastic Case - Metav IndustryLine
The combination of stainless-steel, hardened construction and a large LCD readout ensures reliable daily use and clear readings on the shop floor; the integrated RB 5 data output supports digital traceability and process documentation. Order the digital caliper directly via Metav Werkzeuge or consult our specialists for application advice. Digital caliper 200 mm — Metav IndustryLine, removable roller & large LCD Digital caliper 200 mm is a workshop-ready measuring instrument for general machining and quality control tasks, designed for robust handling and accessible data transfer. Digital readout with ZERO/UNIT/HOLD keys Hardened stainless steel frame with glass scale Removable roller for cylindrical measurements Four measurement modes: inside/outside/depth/step Accurate range for everyday workshop use The instrument covers a 0–200 mm measuring range, which places it in the standard workshop category ideal for the majority of machine‑shop and metalworking tasks. This span balances reach and rigidity, allowing confident single‑hand operation when measuring parts such as housings, shafts and fixtures. Built to DIN 862, the caliper supports routine dimensional checks and quality-control processes where consistent repeatability matters. The combination of a robust frame and a protected scale reduces the risk of measurement drift under normal workshop conditions. Robust build protects electronics and improves readability A hardened stainless‑steel body and a glass scale provide long‑term wear resistance while the metal‑cased electronics shield the display and circuitry from knocks and contamination. The unit features a large LCD with dedicated ON/OFF, ZERO, UNIT and HOLD controls, making it quick to read and simple to operate even in busy production environments. The metal housing contributes to mechanical stability, which helps maintain reliable sensor contact and supports steady measurements over repeated use. Practical functions for production measurement tasks This caliper supports fourfold measurement — external, internal, depth and step — so one instrument replaces several separate gauges in daily workflows. A removable drive roller is supplied, enabling easier measurement of cylindrical components and enabling use with or without the roller depending on the task; the roller interface is provided as a fitting component in the set. For digital integration, the RB 5 data output allows connection to data loggers and inspection software, supporting traceable documentation and simplified batch reporting. Designed for straightforward handling and workshop integration With a compact jaw geometry (jaw length 50/24 mm) and a weight of approximately 0.52 kg, the caliper is easy to position and manoeuvre on most workpieces. The robust construction keeps calibration intervals realistic for heavy use while the clear controls reduce operator error. Delivered ready for immediate use, the instrument suits quality departments, toolrooms and maintenance workshops that require reliable, documented measurements and a straightforward route to digital data capture. Contact Metav Werkzeuge today for tailored advice on integrating this Metav IndustryLine caliper into production or inspection workflows and to arrange supply from our Emmerich facility. Technical data Article number: M216.126.N GTIN: 4054469159683 Weight: 0.52 kg Measuring range: 0–200 mm Material: stainless steel, hardened; scale with glass slide; electronics in metal housing Standard: DIN 862 Data output: RB 5 Power supply: 3 V Jaw length: 50/24 mm Digital display: ON/OFF, ZERO, UNIT, HOLD Removable roller supplied Four measurement modes: external, internal, depth, step Core specifications Measuring principle: digital caliper Measurement span category: standard (100–300 mm) Housing: metal‑encased electronics Scale type: glass slide Operating battery: 3 V Weight: 0.52 kg Special features Removable drive roller for cylindrical parts Large, easy‑to‑read LCD Conforms with DIN 862 Robust, hardened stainless‑steel construction Suitable for workshop and quality‑control use FAQ What measuring functions does this caliper provide? The digital caliper 200 mm offers fourfold measurement: external, internal, depth and step measurements are all supported for versatile workshop use. Can measurement data be transferred to inspection software? Yes, the caliper features an RB 5 data output that enables connection to data collection devices and inspection systems for traceable measurement recording. Is the instrument suitable for general machine‑shop work? Conforming to DIN 862 and covering a 0–200 mm range, the caliper is designed for standard machine‑shop and metalworking tasks where balanced reach and rigidity are required. Does the caliper include any accessories for measuring shafts? A removable drive roller is supplied with the caliper to simplify measurement of cylindrical components; the roller can be fitted or removed depending on the measurement task. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper Large LCD Display, mm/inch Reset, Depth Rod, Locking Screw, CR2025 Battery, DIN 862 - Filetta
Take advantage of 0.01 mm resolution together with USB data output for fast, reliable documentation and consistent workshop results; order the Filetta digital caliper directly via Metav Werkzeuge or contact our consultants for application advice. Digital Caliper M909.441 — 0–200 mm, 0.01 mm resolution, USB (Filetta) Digital Caliper M909.441 is a precise 0–200 mm measuring instrument for workshop and quality-control tasks, equipped with a large LCD, depth gauge and USB data output for seamless process integration 0.01 mm resolution for fine measurements USB data output for digital logging Large LCD with mm/inch and reset Locking screw and integrated depth gauge Accurate measurements where it matters The caliper delivers a 0.01 mm resolution while conforming to DIN 862, providing a trustworthy baseline for routine checks in production and inspection. Its 0–200 mm span places it in the standard workshop category, offering a balanced reach with sufficient stiffness for machining and metalworking tasks. A 50 mm jaw length supports secure clamping of small to medium components and the locking screw fixes readings during transfer, reducing the risk of error and rework. Faster data capture and fewer transcription errors Equipped with a USB data output and a large LCD, the instrument streamlines documentation: measurements can be exported to spreadsheets or quality software without manual re-entry. The display provides mm/inch switching and a reset function, while the integrated on/off control conserves battery life. Powered by a CR2025 cell, the caliper is ready for immediate use and simple battery replacement, making it a practical choice for busy inspection stations wanting to improve traceability and throughput. Practical handling for everyday workshop routines The design focuses on reliable operation rather than complexity: this version is supplied without ABS absolute-position functionality, which keeps zeroing straightforward via the reset key. The caliper includes a built-in depth gauge for bore or recess checks and a clear, high-contrast display for quick readouts under workshop lighting. Robust construction and intuitive controls support consistent results during repetitive tasks, while the combination of digital readout and mechanical features ensures measurements remain reproducible across shifts. For precise measurement and seamless data handling, contact Metav Werkzeuge in Emmerich to discuss the Filetta Digital Caliper M909.441 or to request advice by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: M909.441 GTIN: 4061905448836 Brand: Filetta Category: Calipers / Measuring instruments Numbers / Core technical data Measuring range: 0–200 mm Resolution: 0.01 mm Jaw length: 50 mm Battery: 1 × CR2025 Display type: Large LCD Special features USB data output Digital display with mm/inch and reset functions On/off switch Locking screw for fixed readings Integrated depth gauge Conforms to DIN 862 Supplied without ABS absolute-position system FAQ What measuring range does this caliper cover? The caliper covers a measuring range of 0–200 mm, making it suitable for standard workshop and machine-shop dimensions. What resolution and standard compliance can be expected? Resolution is 0.01 mm and the instrument conforms to DIN 862, providing industrially recognised tolerances for routine inspection. How are measurements transferred to a PC? Measurements are output via USB, enabling direct logging into spreadsheets or quality software from the caliper. Which power source does the instrument use and is battery replacement straightforward? The unit runs on a CR2025 battery; replacement is simple and designed for low downtime in the workshop. Can the caliper measure depth and steps as well as outside dimensions? Yes, the integrated depth gauge supports depth checks, and the jaw geometry allows reliable outside and step measurements. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
200mm Digital Caliper LCD With Moment Lock, mm/inch, 0.01mm Resolution, Four-Function Measurement, Plastic Case - Metav IndustryLine
Benefit from the combination of hardened stainless-steel construction, a 200 mm measuring range and a repeatable moment lock for consistent, workshop-ready results; order the caliper directly via Metav Werkzeuge or contact our consultants for application advice. M216.082 Digital Caliper — 200 mm, hardened stainless steel, moment-lock (Metav IndustryLine) The M216.082 Digital Caliper is a 200 mm workshop-grade digital caliper designed for precise external, internal, depth and step measurements across mechanical engineering and precision workshops. Hardened stainless-steel construction 200 mm measuring range, DIN 862 compliant Digital display with mm/inch and zero Moment-lock for reproducible contact pressure Consistent accuracy for everyday quality control The instrument delivers a resolution of 0.01 mm (0.0005 in) and complies with DIN 862, making it suitable for standard machine‑shop tolerances and routine inspection tasks. The combination of a hardened stainless‑steel beam and a moment‑locking mechanism reduces operator‑induced variation by fixing the contact pressure once the jaws are set; this yields reproducible readings and shortens inspection cycles. The caliper is therefore a practical choice where traceable, repeatable linear measurements are required without the overhead of specialist metrology equipment. Robust design built for workshop handling Constructed from hardened stainless steel, the tool balances stiffness and corrosion resistance for long service life in a production environment. The measured mass of 0.6 kg gives a reassuring feel while remaining manageable for single‑hand operation. The carefully proportioned jaw geometry (jaw length 50/24 mm) maintains rigidity for external and internal measurements, helping to avoid deflection on medium-sized components. As a result, the instrument performs well on bench work and in mobile inspection routines within fabrication and assembly areas. Intuitive digital readout and reproducible measurement routine The clear digital display features ON/OFF, ZERO and mm/inch switching for rapid setup and format changes, while the device includes a standardised data output (RB 1) for downstream logging or SPC integration. The moment lock enables a defined contact force to be set and held, reducing variable pressing force as a source of measurement error. These attributes shorten operator training time and improve first‑pass yield in repetitive measurement tasks, offering a measurable productivity gain in production and quality assurance workflows. Four measurement functions for versatile applications Equipped for external, internal, depth and step measurements, the caliper covers most everyday workshop needs without the need to swap instruments. The fourfold measurement capability streamlines inspection sequences and reduces handling errors when moving between features on a single component. Certified to the DIN standard, the instrument is a versatile metrology tool that supports routine quality control, incoming inspection and setup checks on machine tools and fixtures. For guaranteed precision and prompt delivery from Metav Werkzeuge, request a technical quote for the Metav IndustryLine M216.082 digital caliper by emailing info@metav-werkzeuge.com or calling +49 2822 7131930 Technical data Article number: M216.082 GTIN: 4054469168388 Manufacturer: Metav IndustryLine Weight: 0.6 kg Material: hardened stainless steel Facts Measuring range: 0–200 mm Resolution: 0.01 mm / 0.0005 in Norm: DIN 862 Jaw length: 50/24 mm Data output: RB 1 Special features Digital display with ON/OFF, ZERO and mm/inch Moment‑lock for reproducible contact pressure Fourfold measurement: external, internal, depth, step FAQ What accuracy and resolution does this caliper provide? The M216.082 digital caliper offers a resolution of 0.01 mm (0.0005 in) and is designed to meet the accuracy expectations defined by DIN 862 for workshop calipers. Can the instrument measure internal and depth dimensions? Yes, the caliper supports fourfold measurement—external, internal, depth and step—which makes it suitable for a wide range of workshop inspection tasks. Is the caliper suitable for routine production use? The hardened stainless‑steel construction, moment‑lock and clear digital readout make the M216.082 appropriate for repeated use in production and quality control environments. Does the caliper support data output for process control? The device includes a data output (RB 1) that can be used for logging or integration into SPC workflows. Which standard does the caliper comply with? The instrument is manufactured to conform with DIN 862, ensuring it meets common workshop and inspection standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper Preset Removable Roller, 4‑Function, Stainless Steel, DIN 862 - Metav IndustryLine
Benefit from the combination of preset zeroing, a removable drive roller and hardened stainless steel construction for reliable, repeatable readings in production and inspection. Order the digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Metav IndustryLine Digital caliper M216.126.P — 200 mm, preset & removable roller A Digital caliper 200 mm (preset) for workshop and quality-control use, fitted with a removable drive roller and metal-housed electronics for robust data acquisition Preset function with SET/PRESET button Removable drive roller for versatile measuring Hardened stainless steel with glass scale Four measuring modes for all measurement types Rapid, repeatable readings for production workflows The Digital caliper 200 mm, preset delivers quick, actionable measurements that integrate easily into existing workflows. The preset feature enables fast zeroing or reference-setting via the SET/PRESET control, reducing cycle time for repeat checks and avoiding manual re-zero errors. An integrated RB 5 data output allows transfer of readings to data-collection systems, supporting traceable documentation and simple quality-data capture. With a modest mass of 0.52 kg, the instrument remains easy to manipulate during repetitive tasks while providing steady contact between jaws and component. Durability that suits the workshop environment Construction from hardened stainless steel and a glass scale gives the caliper resilience against wear, while the electronics are protected within a metal housing for improved longevity under workshop conditions. The removable drive roller is supplied as a practical option for measuring round or profiled parts without changing the measuring technique, and the jaw lengths of 50/24 mm give stable contact geometry for external and internal measurements. Compliance with DIN 862 ensures the tool fits recognised workshop standards and integrates with established inspection routines. Practical handling and quality-assurance support Classified in the standard range for hand calipers, this instrument covers the typical workshop span up to 200 mm, offering the balance between reach and rigidity that most metalworking tasks require. Four measuring functions—internal, external, depth and step—are available, enabling one instrument to replace multiple simple gauges. The digital display is operated with an ON/OFF and SET/PRESET interface, simplifying everyday use and reducing operator training time. Data transfer via RB 5 supports automated logging and helps to maintain consistent documentation for production or incoming inspection. Contact Metav Werkzeuge for personalised advice on the Metav IndustryLine digital caliper M216.126.P, request further technical details or discuss integration options by phone or e‑mail Technical Data Article number: M216.126.P GTIN: 4054469167893 Tariff number: 90173000 Category path: Messgeräte › Messschieber Facts Measurement range: 0–200 mm Weight: 0.52 kg Power supply: 3 V Data output: RB 5 Standard: DIN 862 Special features Material: hardened stainless steel; glass scale; electronics in metal housing Preset function with SET/PRESET and ON/OFF Removable drive roller included Four measuring modes: internal, external, depth, step Jaw lengths: 50/24 mm FAQ What measuring tasks is this caliper best suited to? The Metav IndustryLine digital caliper M216.126.P is aimed at standard workshop and machine-shop tasks up to 200 mm, covering external, internal, depth and step measurements. How is zeroing handled on this instrument? Zeroing and reference setting are performed using the SET/PRESET button; the preset function on the M216.126.P allows quick establishment of a measurement baseline. Can measurement values be exported to a PC or data-collection system? Yes, the caliper provides an RB 5 data output for connection to data-collection devices, enabling straightforward transfer of readings for documentation. Is the caliper robust enough for daily shop-floor use? With a hardened stainless steel construction, glass scale and metal-housed electronics, the instrument is built to withstand regular workshop handling. Does the caliper meet recognised standards? The tool conforms to DIN 862, aligning it with common workshop and inspection standards in mechanical engineering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper Sharp Probe Tips, 0.01mm Resolution, Data Hold & Unit, Four‑Function Measurement, Stainless Steel, Supplied in Case - Metav IndustryLine
Take advantage of the combination of precise pointed jaws, a clear digital display and robust stainless hardened construction for reliable workshop measurement; order the caliper directly via Metav Werkzeuge or ask our consultants for application advice. Digital caliper 200 mm M240.018.N — pointed jaws, stainless hardened (Metav IndustryLine) The Digital caliper 200 mm provides exact measurements for confined and detailed components, combining a compact jaw geometry with a sturdy metal body for everyday workshop and inspection work. Precise digital display with ON/OFF ZERO UNIT HOLD Pointed jaws for narrow and internal measurements Hardened stainless steel with metal housing Four measurement modes: inside, outside, depth, step Narrow features, clear gains for fine work The pointed jaws are designed for access to tight bores, grooves and narrow features where standard jaws struggle; this geometry reduces contact uncertainty and simplifies alignment on small parts. Classified as a Standard caliper (measurement range 0–200 mm), the instrument balances reach and stiffness, making it well suited for general engineering and metalwork. The gauge supports the four common measurement methods—inside, outside, depth and step—so a single tool covers multiple tasks and reduces tool changes. Intuitive digital handling to speed up inspection A concise digital display with dedicated ON/OFF, ZERO, UNIT and HOLD functions allows fast readings and straightforward unit switching without guesswork. The metal housing protects the electronics while the hardened stainless steel construction withstands daily workshop use and maintains measurement geometry under mechanical stress. At about 0.45 kg, the instrument is lightweight enough for single‑hand operation yet solid enough to resist unintended flexing during normal handling. Workshop-ready design and trusted factory standard The instrument is supplied to factory standard (Werksnorm) and is designed for routine quality checks, fixture setup and precision component inspection. The pointed jaw length specification 50/24 mm gives a practical reference for micro‑features, and the metal housing enhances durability in harsher environments. Built for repeatable results in production and maintenance contexts, this caliper offers a pragmatic combination of accessibility, robustness and clear digital readout to support efficient measuring processes. Choose the Metav IndustryLine digital caliper for reliable narrow‑feature measurement and contact Metav Werkzeuge in Emmerich for technical details at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: M240.018.N Label: Digital-Messschieber 200 mm, spitzer Schnabel, 3 V INOX, Werksnorm GTIN: 4054469160313 Eclass: 21170344 Data output: RB 5 Facts Measurement range: 0–200 mm Weight: 0.45 kg Jaw length (long/short): 50/24 mm Tariff number: 90173000 Special features Material: stainless steel, hardened, metal housing Pointed jaws for narrow/internal measurements Digital display with ON/OFF, ZERO, UNIT and HOLD buttons Four measurement modes: inside, outside, depth, step Delivered to factory standard (Werksnorm) FAQ Which measurement methods are supported? The caliper supports four measurement modes—inside, outside, depth and step—so both external dimensions and internal or stepped features can be measured with one instrument. Is this caliper suitable for confined bores and narrow parts? Yes, the pointed jaws and the specified jaw geometry (50/24 mm) make the caliper especially suitable for narrow bores, grooves and fine components that require precise contact points. What is the construction and durability of the instrument? Constructed from hardened stainless steel with a protective metal housing, the gauge is designed for routine workshop use and offers robustness against mechanical wear. How is measurement data output provided? This model includes a data output option listed as RB 5, enabling integration with compatible data collection systems or readout devices. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper Sliding Jaw Stainless Steel Metal Body 0.01mm Resolution Plastic Case - Metav IndustryLine
Take advantage of precise 0.01 mm readout, hardened stainless steel construction and a compact sliding jaw for reliable workshop measurement; order directly via Metav Werkzeuge or contact our consultants for application advice. Digital Caliper M240.082.N — 200 mm digital caliper, hardened stainless steel (Metav IndustryLine) The Digital Caliper M240.082.N is a 200 mm digital measuring instrument for workshop and production use, featuring an adjustable sliding jaw and robust metal housing for routine dimensional control Hardened stainless steel construction 0.01 mm resolution and 0.0005 in display Sliding jaw with 120/50 mm jaw length Delivered in protective transport case Precision where it matters The caliper delivers a 0.01 mm resolution on a clear digital readout, making it suitable for standard workshop quality control and machine‑shop tasks. With a measuring span of 0–200 mm the tool sits in the standard measuring range category, which balances reach and rigidity for most fixtures, housings and machined components. The factory standard specification ensures consistent performance across repeated measurements, reducing rework and improving throughput by providing reliable, comparable data every time. Built to withstand daily workshop use Constructed from hardened stainless steel with a metal housing, the instrument resists wear and maintains jaw alignment under regular handling. The adjustable sliding jaw (120/50 mm) adds flexibility for different parts while the overall design keeps the instrument easy to manoeuvre during one‑handed checks. The moderate weight (0.58 kg) reflects a robust build without compromising handling; this balance reduces measurement uncertainty caused by flexing or slip and supports stable, repeatable results on the shop floor. Practical digital functions for faster inspection The large digital display includes ON/OFF, ZERO, UNIT and HOLD keys for quick conversions and temporary value retention, simplifying common inspection routines. A data output port (RB 5) allows integration with data loggers or inspection software for traceable records and batch documentation, speeding up reporting and reducing transcription errors. Supplied in a protective transport case, the instrument is ready for safe storage and mobile use across workstations, preserving calibration and preventing accidental damage. Contact Metav Werkzeuge for a tailored consultation on Metav IndustryLine measuring equipment, request a technical datasheet or obtain a quotation by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data Article number: M240.082.N GTIN: 4061905038372 Brand: Metav IndustryLine Measuring range: 0–200 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.58 kg Power supply: 3 V Numbers Jaw length: 120/50 mm Display functions: ON/OFF, ZERO, UNIT, HOLD Material: Hardened stainless steel, metal housing Data output: RB 5 Special features Sliding (adjustable) jaw Protective transport case for delivery Factory standard specification (werksnorm) Suitable for standard workshop measurement category FAQ What measuring range does the caliper cover? The instrument covers 0–200 mm and is classified in the standard measuring range suitable for general machine‑shop and workshop tasks. What resolution and display functions are provided? The caliper provides a 0.01 mm resolution (0.0005 in) and features ON/OFF, ZERO, UNIT and HOLD keys for straightforward operation. Is the tool ready for data logging? Yes. The caliper includes an RB 5 data output for connection to data loggers or inspection systems to support traceable measurement records. Does the delivery include protective packaging? The product is supplied in a protective transport case to safeguard the instrument during transport and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper With 80mm Depth Rod, 5mm Bore, Preset Display, Stainless Steel, Plastic Case - Metav IndustryLine
Take advantage of precise, repeatable readings thanks to the 0.01 mm resolution and the convenient preset function; the robust INOX construction and metal housing support everyday workshop use. Order the caliper directly via Metav Werkzeuge or consult the Metav team for application advice. Digital-Uni-MS200 mm x 80 mm — digital precision caliper with INOX construction and preset function Digital-Uni-MS200 mm x 80 mm is a workshop caliper designed for reliable internal and external measurement tasks in metalworking and quality control. Digital display with 0.01 mm resolution 200 mm measuring range for standard workshop tasks INOX stainless construction and metal housing Preset function with ON/OFF and SET/PRESET buttons Faster, traceable readings for production environments Built around a clear digital display with a 0.01 mm reading step, this instrument reduces reading errors and speeds up inspection routines. The integrated preset (SET/PRESET) lets operators store a zero reference quickly, which improves reproducibility during batch checks. With a simple ON/OFF control, the instrument supports efficient changeover between parts and short cycle inspections, delivering measurable time savings in repetitive measurement tasks while maintaining industrial-grade precision. Robust mechanics and practical interfaces for the workshop Constructed in INOX with a solid metal housing, the caliper offers mechanical durability for daily use. The 200 mm measuring range places it in the Standard class for machine‑shop and metalwork applications, combining reach and stiffness for general-purpose measurement. The jaws extend 85 mm, the unit weighs 0.55 kg and includes a Ø5 mm bore for mounting measuring inserts or fixtures, enabling versatile fixturing options. A compact power solution (measuring system powered by 3 V) and a data output via RB 5 support integration into digital measurement workflows. Designed for quality workflows and dependable delivery As a factory‑standard instrument made for workshop inspection, the caliper supports rapid documentation and quality control steps. The RB 5 data output eases transfer to data collection systems, helping to reduce transcription errors and streamline traceability in inspection logs. Metav’s distribution combines practical availability with a commitment to consistent supply for industry: a proven partner for workshops and small-scale production that values straightforward, reliable measuring equipment. Contact Metav Werkzeuge for application guidance and to obtain the Digital-Uni-MS200 mm x 80 mm from Metav IndustryLine — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: M240.208.O GTIN: 4054469151960 Label: Digital-Uni-MS200 mm x 80 mm, Bohrung Ø=5 mm, without inserts, preset, INOX, factory standard Material: metal housing, stainless construction Data output: RB 5 Facts Measuring range: 0–200 mm Resolution / reading: 0.01 mm Jaws length: 85 mm Weight: 0.55 kg Measuring system power: 3 V Special features Digital display with ON/OFF and SET/PRESET buttons Preset (zeroing) function for repeatable measurements Bore for measuring inserts Ø 5 mm for fixture mounting Factory standard delivery Designed for internal and external measurement tasks FAQ What is the smallest increment readable on this caliper? The instrument reads in 0.01 mm increments; the Digital-Uni-MS200 mm x 80 mm is therefore suitable for standard workshop quality checks requiring this resolution. Is the caliper suitable for general mechanical workshop use? Yes; with a 0–200 mm range the tool falls into the Standard class for machine and metalwork tasks and balances reach with rigidity for everyday measurement needs. How can measurement data be exported from the caliper? Data is provided via the RB 5 output; the Digital-Uni-MS200 mm x 80 mm therefore supports connection to compatible data capture systems for streamlined logging. Is the caliper supplied calibrated to an accredited standard? The caliper is delivered to factory standard; no ISO 17025 calibration certificate is included with this item unless explicitly specified in the product label. Which materials and environments is the caliper built for? Constructed in stainless material with a metal housing, the instrument is robust for workshop environments and routine handling typical in inspection and production areas. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper With Carbide Measuring Faces, Removable Roller, 4‑Function, DIN 862, Supplied In Case - Metav IndustryLine
Take advantage of the combination of a 200 mm measuring range, hardened stainless-steel construction with carbide measuring faces and integrated data output for reliable workshop measurement and traceable documentation. Order the instrument directly via Metav Werkzeuge or consult the Metav technical team for specification matching. Digital Caliper 200 mm, with carbide measuring faces and removable roller (DIN 862) A Digital Caliper 200 mm designed for workshop and quality-control use, offering hardened stainless-steel construction, a clear digital readout and DIN 862 conformity for dependable dimensional checks. Carbide measuring faces for durability 200 mm range, compliant with DIN 862 Fourfold measurement: inside, outside, depth, step RB 5 data output; ON/ZERO/UNIT/HOLD display Robust range and workshop suitability for everyday quality control The caliper sits in the Standard class (measuring range up to 300 mm), which balances reach and stiffness for most machine‑shop and metal‑working tasks. The 0–200 mm range provides sufficient coverage for typical components while keeping the instrument compact and easy to handle during repetitive checks. Conformity with DIN 862 guarantees that dimensional routines and inspection records meet recognised workshop standards, supporting consistent process control and straightforward integration into existing quality procedures. Durable measuring faces and clear digital operation for repeatable results Equipped with carbide measuring faces and a hardened stainless-steel beam with a glass scale, the instrument maintains contact geometry under frequent use and resists wear that would otherwise affect accuracy. The digital display includes ON/OFF, ZERO, UNIT and HOLD functions, providing quick unit changes and temporary value retention for hands‑free documentation. The combination of robust materials and simple display controls reduces rework caused by worn jaws or ambiguous readings, improving inspection throughput and reproducibility. Practical handling features that speed up shop workflow A removable roller and a jaw arrangement with a jaw length of 50/24 mm support measurements in confined or recessed areas and simplify cleaning after use. The caliper’s fourfold measurement capability—outside, inside, depth and step—covers the most common dimensional tasks with a single instrument, cutting the need to change tools during an inspection sequence. Delivered in a protective transport case, the device is protected during storage and transit, so it arrives on the workbench ready for immediate use. Data capture and traceability for modern production environments The instrument provides an RB 5 data output for straightforward transfer of readings to logging systems or data collectors, helping to reduce transcription errors and to build inspection traceability. For workshops seeking to document process capability or to feed measurement values into SPC routines, the digital interface facilitates connectivity. The compact design and clear ergonomics make this caliper a practical choice for bench inspection, jig‑set checks and in‑process control. For reliable workshop precision from Metav IndustryLine and tailored advice on integrating the caliper into existing inspection routines, contact Metav Werkzeuge for detailed technical guidance and order support. Technical data Article number: M216.098.N GTIN: 4054469159669 Norm: DIN 862 Label: Digital Caliper 200 mm, with carbide measuring faces, removable roller Facts Measuring range: 0–200 mm Weight: 0.5 kg Jaw length: 50/24 mm Power supply: 3 V Tariff number: 90173000 Special features Carbide measuring faces (HM) Hardened stainless-steel construction; scale with glass beam Fourfold measurement: outside / inside / depth / step Digital display with ON/OFF, ZERO, UNIT, HOLD keys RB 5 data output for measurement transfer Delivered in a protective case for transport FAQ What inspection tasks is this caliper best suited for? The Digital Caliper 200 mm (Metav IndustryLine, SKU M216.098.N) is intended for general workshop and quality‑control tasks where a 0–200 mm range and robust measuring faces are required; typical uses include component checks, jig set‑ups and incoming inspection. Does the instrument comply with recognised standards? Yes, the caliper is manufactured to DIN 862, ensuring it meets commonly accepted dimensional and functional requirements for mechanical workshop measuring tools. Can measurement values be transferred to a data logger? The caliper features an RB 5 data output, enabling direct transfer of readings to compatible data loggers or SPC systems to support traceable documentation and to reduce manual entry errors. What is the benefit of the carbide measuring faces and glass scale? Carbide faces reduce wear at the contact points, extending service life and maintaining measurement accuracy under frequent use; the glass scale supports precise, stable guidance of the slider and contributes to repeatable results. Is the roller necessary and what does removable roller enable? The removable roller allows flexible handling for specific geometries and simplifies cleaning and maintenance of the measuring faces; when not required, it can be removed to ease access in tight measurement situations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper With Carbide Tips, IP67, Square Depth Rod 3.7×1.3mm, Four‑Point Measuring, Supplied In Case - Metav IndustryLine
Combine carbide measuring faces with IP67 protection for reliable, repeatable measurements on the production floor; the hardened stainless‑steel construction adds long service life. Order the digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Digital caliper M216.159.N — 200 mm, carbide jaws, IP67 The Digital caliper M216.159.N is a 200 mm workshop caliper for general machine‑shop inspection and production control, equipped with carbide measuring faces and a square depth gauge for robust multi‑purpose use. Robust IP67 protection Carbide measuring jaws 200 mm measuring range 0.01 mm digital resolution Four‑function measurement capability Precision and repeatability that supports production control The instrument delivers a 0.01 mm display resolution and an accuracy of ±0.03 mm, making it suitable for standard quality control tasks in metalworking and mechanical assembly. Constructed from hardened stainless steel, the gauge maintains dimensional stability under everyday workshop stresses and complies with DIN 862, the established benchmark for caliper metrology. These specifications translate into predictable measurement results that reduce rework and speed up inspection cycles, so production planning and batch release can proceed with confidence. Built to withstand shop‑floor conditions and reduce downtime With IP67 sealing and carbide jaws, the caliper resists coolant, chips and light immersion, allowing measurement close to the machining centre without sacrificing tool life. The digital display with MODE and SET keys enables quick unit changes and zeroing, while the instrument’s robust build reduces the frequency of replacements. The result is a pragmatic balance of durability and handling efficiency that keeps measurement routines flowing and lowers the total cost of ownership for inspection tools. Practical measurement range and versatile functions for everyday workshops Classified in the Standard range (measuring span up to 300 mm), the device offers the familiar reach expected in machine shops while remaining easy to handle for single‑operator use. The square depth gauge (3.7 × 1.3 mm) and a 50 mm beak length extend measurement versatility to narrow grooves and stepped components. Thanks to the four‑function measurement setup, the caliper covers inside, outside, depth and step measurements without attachment changes, reducing cycle time and limiting operator handling errors. Clear numerical data and easy integration into workflows Numeric details are straightforward: a 0–200 mm measuring range, 0.01 mm display resolution, and ±0.03 mm stated accuracy. The instrument’s weight (0.5 kg) and robust construction make it a familiar, ergonomic tool for repeated use. The combination of these measurable values helps procurement and quality teams compare instruments objectively and select the solution that fits their tolerance budgets and handling preferences. Choose the Metav IndustryLine digital caliper for dependable IP67 performance and carbide durability, and contact Metav Werkzeuge for expert advice and reliable supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M216.159.N GTIN: 4054469178882 Tariff code: 90173000 Facts Measuring range: 0–200 mm Resolution: 0.01 mm (0.0005 in) Accuracy: ±0.03 mm Weight: 0.5 kg Depth gauge: 3.7 × 1.3 mm Beak length: 50 mm Special features IP67 protection Hardened stainless steel body Carbide measuring faces Digital display with MODE and SET keys Four‑function measurement (inside, outside, depth, step) Complies with DIN 862 eCl@ss: 21170344 FAQ What accuracy can be expected for routine checks with this caliper? The M216.159.N provides a stated accuracy of ±0.03 mm, which suits standard workshop inspection and quality control tasks in line with DIN 862. Can the caliper be used on the shop floor near coolant and chips? Yes. The IP67 rating and durable construction allow operation close to machining processes where liquid exposure and particulate contamination occur. Which measurement tasks does the instrument cover? The caliper supports four‑function measurement: external, internal, depth and step measurements are all possible without additional attachments. Are the measuring faces wear‑resistant for long‑term use? The device features carbide measuring faces, chosen for their abrasion resistance and longevity in contact with harder materials. Is this instrument suitable for calibration and traceable inspections? The caliper meets DIN 862 requirements; for traceable calibration options and certificates, please consult Metav Werkzeuge for available calibration services and documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper With Fraction Display 0.01mm/0.0005" 1/128" Four-Function, Stainless Steel, Case - Metav IndustryLine
Take advantage of precise, repeatable readings and a robust, corrosion‑resistant build to streamline quality checks on the workshop floor; the digital display with 0.01 mm resolution and the four measurement functions ensure fast decisions and fewer re-measures. Order the instrument directly via Metav Werkzeuge or consult the Metav team for application advice. M216.172 digital caliper – 200 mm, fraction and inch display, hardened stainless steel The M216.172 is a digital caliper designed for standard workshop and machine‑shop applications, offering a 0–200 mm measuring range with decimal and fraction readouts for flexible inspection tasks. Digital readout mm/inch/fraction 0.01 mm Hardened stainless steel construction Four measurement functions: inside/outside/depth/step RB 6 data output for external recording Accurate readings that speed up quality control The instrument delivers a 0.01 mm resolution on the decimal display and offers an inch resolution of 0.0005" / 1/128", making it suitable for typical metrology and production‑control tasks. The digital electronics include ON/OFF, ZERO and mm/inch/F functions for immediate switching between units and fraction display modes; this reduces conversion errors and accelerates inspection cycles. With a clear digital readout and a data output labelled RB 6, the device supports documented measurements and easier transfer into statistical process control workflows, enhancing traceability in serial production. Robust construction for reliable workshop use Built from hardened stainless steel, the caliper resists daily wear and corrosion while maintaining jaw alignment and repeatability. The 200 mm measuring range places the tool in the standard class of calipers, a practical compromise between reach and stiffness that suits general engineering tasks such as component inspection, fixture set‑up and maintenance checks. The hardened material and solid construction reduce deformation under normal handling, which supports consistent measurement results across the shift and lowers the incidence of rework. Flexible measuring modes and smooth integration into workflows Four‑way measurement capability covers external, internal, depth and step measurements, so fewer instruments are required at the bench and setups remain compact. The fraction display option simplifies work with legacy drawings or parts specified in imperial fractions, while the digital zeroing function enables quick comparative checks. The combination of clear unit switching and an external RB 6 connector makes the caliper an efficient tool for shopfloor tasks where speed, documentation and compatibility with data collection systems matter. For tailored advice on using the Metav IndustryLine M216.172 in specific inspection routines and to check availability from Metav Werkzeuge in Emmerich, contact the Metav team for prompt handling and delivery. Technical Data Article number: M216.172 GTIN: 4054469169002 Tariff number: 90173000 eClass: 21170344 Manufacturer: Metav IndustryLine Facts Measuring range: 0–200 mm Resolution: 0.01 mm Inch/fraction resolution: 0.0005" / 1/128" Display functions: ON/OFF, ZERO, mm/inch/F Digital: yes Special features Material: hardened stainless steel Measurement modes: outside, inside, depth, step Data output: RB 6 Four‑way measurement capability FAQ What accuracy can be expected from the caliper? The M216.172 provides a display resolution of 0.01 mm and an inch resolution of 0.0005" (1/128"), suitable for standard workshop control; repeatability depends on handling and measuring technique. Which measuring tasks are covered by this caliper? The instrument supports external, internal, depth and step measurements, making it versatile for component inspection, jig set‑up and maintenance verification. Is the caliper suitable for corrosive environments? The caliper is constructed from hardened stainless steel, which improves corrosion resistance compared with untreated alloys; routine cleaning after use will prolong service life. Can measurements be transferred to a PC or SPC system? A data output labelled RB 6 is provided for external recording; compatibility with specific systems depends on the receiving equipment and adapter cables. Does the display show imperial fractions as well as decimals? Yes, the unit offers decimal millimetre/inch switching and a fraction display mode (1/128), simplifying work with imperial specifications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper With Removable Roller, LCD Display, DIN 862, Four-Function Measurement, Supplied In Case - Metav IndustryLine
Take advantage of a robust combination of workshop‑grade construction and digital convenience: the hardened stainless steel slide with glass scale and the removable roller provide reliable handling and efficient rolling checks, while the integrated data output streamlines measurement logging; order directly via Metav Werkzeuge or consult the technical team for specification matching. Digital caliper M216.096.N — 200 mm, removable roller (Metav IndustryLine) The Digital caliper M216.096.N delivers precise outside, inside, depth and step measurements for metalworking and quality control in production and inspection environments. 200 mm measuring range, workshop standard Hardened stainless-steel construction Removable roller for quick rolling checks Four-function measurement capability Precise, verifiable readings for production control The instrument provides a stable, reproducible measuring solution in the common 0–200 mm category, complying with DIN 862 to match workshop and inspection requirements. The clear digital display features ON/OFF, ZERO, UNIT and HOLD keys, which enable straightforward zeroing and unit selection for repeatable readings. With the RB 5 data output, measured values can be exported to data capture systems for traceable logging, improving quality‑control workflows and reducing transcription errors. The combination of an easy-to-read display and a solid measuring concept supports fast decision making on the shop floor. Durable build and versatile measurement modes Constructed from hardened stainless steel and fitted with a glass scale, this caliper is designed for everyday use in machining and maintenance. The removable roller allows quick rolling checks on cylindrical parts while standard jaws cover external and internal dimensions; the tool also performs depth and step measurements, offering full inspection capability in a single instrument. The jaw geometry (50/24 mm) supports secure contact on a variety of components, and the compact mass ensures comfortable handling during repetitive tasks. Practical integration and workshop readiness Weighing approximately 0.5 kg, the measuring tool is robust yet manageable for routine use and inspection. Its four‑function measurement capability (outside, inside, depth, step) makes it a versatile addition to measuring benches and portable kits alike. The digital readout and RB 5 interface support straightforward data transfer into production records or SPC systems. Compliance with DIN standards and the use of corrosion‑resistant materials underline its suitability for metalworking environments, where dependable, repeatable measurements are essential for process control. For procurement or technical advice on the Metav IndustryLine digital calipers, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com. Technical Data Article number: M216.096.N GTIN: 4054469159621 Norm: DIN 862 Manufacturer: Metav IndustryLine Eclass: 21170344 Facts Measuring range: 0–200 mm Weight: 0.5 kg Jaw length: 50/24 mm Tariff code: 90173000 Power: 3 V Special features Stainless steel, hardened; scale with glass slide Digital display with ON/OFF, ZERO, UNIT, HOLD Removable roller (detachable) Data output: RB 5 Four‑function measurement: inside, outside, depth, step FAQ What types of measurement can this caliper perform? The Digital caliper M216.096.N supports inside, outside, depth and step measurements, providing four‑function versatility for inspection and workshop tasks. Which standard does the instrument meet? This Metav IndustryLine digital caliper is manufactured in accordance with DIN 862, ensuring conformity with common workshop and inspection requirements. What materials and construction ensure durability? The caliper is made from hardened stainless steel with a glass scale, giving corrosion resistance and stable measurement surfaces suitable for machining environments. Is data output available for system integration? Yes — the caliper features an RB 5 data output for transfer of measured values to compatible data capture or SPC systems. What is the measuring range and how portable is the device? Measuring range is 0–200 mm; the instrument is compact and weighs about 0.5 kg, making it suitable for bench and portable inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper With Square Depth Rod 3.7×1.3mm, 0.01mm Resolution, IP67, Four‑Function, Hardened Stainless Steel - Metav IndustryLine
Take advantage of precise measurement, robust protection and versatile four‑way measuring capability to streamline inspection tasks on the shop floor. The combination of IP67 water‑ and dust resistance and 0.01 mm readout ensures reliable results even in humid or coolant‑exposed environments. Order the caliper directly via Metav Werkzeuge or contact our consultants for application advice. Digital caliper 200 mm (IP67) with rectangular depth rod 3.7 x 1.3 mm — Metav IndustryLine A Digital caliper 200 mm (IP67) designed for workshop and machine‑shop use, offering reliable outside, inside, depth and step measurements with a robust stainless‑steel construction. IP67 protection for dust and water resistance 0.01 mm resolution with MODE and SET functions Hardened stainless steel construction Four‑way measurement: inside, outside, depth, steps Accurate measurement that speeds up inspection The 200 mm digital caliper delivers 0.01 mm resolution on a clear digital display, paired with an industry‑standard accuracy of ±0.03 mm for this measuring range. Compliance with DIN 862 provides an objective baseline for quality control processes, so measurement results can be compared across shifts and suppliers. The precise readout shortens inspection cycles and reduces rework by helping operators make decisive adjustments faster; in production environments the result is improved throughput and fewer stoppages. Built to withstand workshop conditions and simplify handling A hardened stainless steel frame and IP67 ingress protection combine to make this caliper resilient against chips, coolant and light wash‑down. The rectangular depth rod (3.7 x 1.3 mm) permits stable depth measurement in narrow bores and stepped features that round rods struggle to reach. The display includes MODE and SET controls for quick unit changes and zeroing, enabling straightforward one‑person operation even on the shop floor. Robust materials and protected electronics lower downtime and extend service life. Versatile measuring modes and shop‑floor integration This instrument supports four‑way measurement — outside, inside, depth and step — allowing a single tool to replace multiple gauges and reduce tool changes at the bench. Categorised as a standard‑range caliper (measuring range up to 300 mm), it offers the best compromise between reach and stiffness for general machine‑shop tasks. The compact slider and ergonomic thumbwheel allow controlled movement and repeatable contact force, contributing to consistent results across repeated checks. If further technical data or application examples are required, Metav’s consultants can advise on integration into existing inspection routines. For robust, workshop‑ready measurement choose the Metav IndustryLine digital caliper and contact Metav Werkzeuge for tailored advice and ordering assistance. Technical data Article number: M216.152.N GTIN: 4054469178851 Brand: Metav IndustryLine Category: Calipers Standard: DIN 862 Facts Measuring range: 0–200 mm Resolution: 0.01 mm (0.0005 in) Accuracy: ±0.03 mm Weight: 0.5 kg Protection class: IP67 Tariff number: 90173000 Special features Material: hardened stainless steel Depth rod: rectangular 3.7 x 1.3 mm Digital display with MODE and SET buttons Four‑way measurement: inside, outside, depth, steps FAQ What is the measuring accuracy of this caliper? The Digital caliper 200 mm from Metav IndustryLine has an accuracy of approximately ±0.03 mm for the 0–200 mm range, in line with DIN 862 for digital calipers. Can the caliper be used in a wet environment or with coolant exposure? Yes, the instrument is rated IP67, so the digital caliper withstands dust ingress and temporary immersion, making it suitable for use where coolant or splash‑back may occur. Which measurements can be performed with the caliper? The caliper supports four‑way measurement: outside, inside, depth and step measurements, enabling versatile use across common workshop tasks. Is the display easy to operate and switch between units? The digital display includes MODE and SET buttons for rapid switching of units and zeroing, designed for efficient operation during repetitive inspection work. What is the product SKU and which brand supplies it? The product is supplied by Metav IndustryLine and is listed as SKU M216.152.N for ordering and inventory purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Depth Gauge Inductive IP67, MODE/INC/HOLD Display, CR2032 Battery - Metav IndustryLine
Take advantage of the combination of robust IP67 protection, an inductive measuring system and workshop‑grade hardened stainless steel for dependable depth measurement across routine production tasks; order the depth gauge directly via Metav Werkzeuge or ask our consultants if needed. Digital depth gauge M218.121.D — 200 mm range, IP67 protection (Metav IndustryLine) A Digital depth gauge M218.121.D for precise depth measurement in machine shops and maintenance work, featuring an inductive sensor and full dust‑ and splash‑proof protection. 200 mm measurement range, workshop standard IP67 waterproof and dustproof protection Inductive measuring system for reliable readings DIN 862 compliance, hardened stainless steel Durable protection that keeps measurements reliable The instrument is built for the workshop environment: IP67 sealing prevents dust ingress and protects against temporary immersion, while the hardened stainless steel body resists corrosion and everyday wear. This combination reduces downtime and maintenance needs, delivering a stable measuring platform that retains calibration through regular use. The build also keeps weight manageable at 0.4 kg, supporting handheld operation without excessive fatigue and ensuring the tool is practical for repeated checks on the production line. Precise, repeatable depth readings with inductive sensing Equipped with an inductive measuring system and a display resolution of 0.01 mm, this depth gauge provides clear, repeatable values suitable for standard quality control tasks. The unit meets DIN 862 conventions for caliper‑type instruments and covers a 0–200 mm range, classified as a Standard workshop size that balances reach and stiffness for typical machine‑shop components. Readout functions (MODE, INC, HOLD and 0/ON) support simple workflows, while the absence of a data output means readings are taken directly from the display for immediate decisions on the shop floor. Practical operation and service features for everyday use Operation is designed for clarity: the large digital readout and tactile buttons enable fast zeroing, incremental measurements and value hold for transfer to inspection records. Power is supplied by a 3 V CR2032 battery, a common and easy‑to‑replace cell that keeps service straightforward. The compact form factor and robust construction make the gauge well suited to bench work and on‑machine checks, offering a reliable tool for machinists, maintenance staff and inspection personnel who require a durable, manual depth measuring instrument. Consider the Metav IndustryLine depth gauge for robust, IP67‑rated depth measurement and contact Metav Werkzeuge for ordering details or technical advice. Technical data Article number: M218.121.D GTIN: 4054469182940 Brand: Metav IndustryLine Facts Measurement range: 0–200 mm Resolution: 0.01 mm Weight: 0.4 kg Battery: 3 V CR 2032 Bridge: 100 mm Special features Material: hardened stainless steel Protection class: IP67 Measuring system: inductive Display functions: MODE, INC, HOLD, 0/ON Standard: DIN 862 No data output (manual readout) FAQ What measurement range does the depth gauge cover? The instrument provides a measurement range of 0–200 mm, placing it in the Standard caliper class (100–300 mm), which suits general machine‑shop and metalworking tasks. How accurate are the readings and what resolution is shown? The digital readout offers a resolution of 0.01 mm; the device follows DIN 862 conventions for caliper instruments and is intended for standard workshop quality control. Is the gauge suitable for use at the machine or on the shop floor? Yes. IP67 protection and a hardened stainless‑steel body make the tool resistant to dust and splash exposure, making it appropriate for workshop environments and on‑machine checks. Does the depth gauge provide a data interface for SPC systems? This model is supplied without data output; readings are taken directly from the display and recorded manually. What powers the display and how easy is maintenance? The unit uses a 3 V CR2032 battery, a widely available cell that is simple to replace, reducing maintenance complexity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Einbaumessschieber senkrecht, 0,01mm, DIN 862 - Metav IndustryLine
Das 1989 gegründete Traditionsunternehmen für den Vertrieb von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für Premium-Messwerkzeuge zu einem überzeugenden Preis. HIGHLIGHTS senkrecht Messbereich: bis 200mm Ablesung: 0,01mm Material: Messschiene aus Aluminium (30x7,9mm) Ausführung: digital Datenausgang: RB 5 0–200mm, die im Alltag zählen Der Messbereich 0 – 200mm bietet spürbare Freiheit bei typischen Bauteilgrößen. Übergänge von grober Kontrolle zu feiner Prüfung gelingen ohne Bruch im Ablauf. Im allgemeinen Maschinen- und Metallbau erweist sich dieser Bereich als tragfähige Basis für konstante Ergebnisse. Die Arbeit bleibt flüssig, weil die relevanten Dimensionen im direkten Zugriff sind. Das schafft Sicherheit in jeder Projektphase. Wir haben uns Gedanken gemacht, wie wir die einzelnen Messbereiche der Messschieber Klassifizieren können. Klassifizierung Messbereiche beim Messschieber.. Die richtige Toleranz einhalten durch Fertigung nach weltweit gültigen Standards Unser Einbaumessschieber Metav IndustryLine basiert vollständig auf den Richtlinien der DIN 862. Dies betrifft sämtliche Produktionsschritte und Kalibrierverfahren ebenso wie die eingesetzten Materialien. Die so gewährleistete Maßhaltigkeit und Wiederholgenauigkeit sorgt für einheitliche Qualitätsstandards und internationale Vergleichbarkeit – ein entscheidender Vorteil bei Audits und Kundenfreigaben. Die Messwerkzeuge von Metav IndustryLine werden von unseren Experten für Messwerkzeuge empfohlen. Metav IndustryLine steht für hervorragende Messwerkzeuge zu einem unschlagbaren Preis. Alle Messwerkzeuge werden nach der Produktion gestestet. Informationen zur technischen Ausstattung für digitalen Einbaumessschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Einbaumessschieber Bestellnummer: M218.455 Zahlen und Fakten: Messbereich: 0 bis 200mm Gewicht: 0,3kg Norm: DIN 862 Ablesung: 0,01mm Datenausgang: RB 5 Ablesung in Inch/Zoll: 0,0005 Genauigkeit: 0,03mm Länge: 330mm Besonderheiten Ausführung: digital Material: Messschiene aus Aluminium (30x7,9mm) Digitalanzeige: mit EIN/AUS-, mm/inch- und NULL-Taste Messsystem: kapazitiv senkrecht Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Wichtige Aspekte beim Erwerb eines Messschiebers: Zusatzfunktionen wie Datenausgangsoptionen oder die Regelung der Messkraft sind neben der Genauigkeit und dem Messbereich essenziell. Im Umfeld der Qualitätssicherung und in Laboreinrichtungen ist ein Messschieber mit kontrollierter Anwendungskraft besonders hilfreich. Außerdem sollte man untersuchen, ob ein kalibrierter Messschieber sinnvoll ist. Bereits bei der Zustellung ist eine Kalibrierung möglich, und für die Garantie der Prozesssicherheit sollte diese jährlich wiederholt werden. Pflegehinweis - damit Sie lange etwas von Ihrem Einbaumessschieber von Metav IndustryLine haben: Einbaumessschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
200mm Digital Einbaumessschieber waagerecht, 0,01mm, DIN 862 - Metav IndustryLine
Die überragenden Bewertungen von Metav Werkzeuge stehen für über 42.000 glückliche Kunden. Probiere es aus und shoppe auf metav-shop.de.! Verlässlich im Alltag Der Messbereich bis 200mm deckt die gängigsten Bauteilgrößen im Alltag zuverlässig ab. Von Rohteilen bis zu fertigen Komponenten bleibt genügend Spielraum für wiederkehrende Aufgaben. Die Handhabung fügt sich flüssig in Arbeitsabläufe ein und sorgt für zügige Kontrollen zwischendurch. Im allgemeinen Maschinen- und Metallbau liefert dieser Bereich klare, reproduzierbare Ergebnisse. So entsteht Tempo ohne Hektik und Präzision ohne Umwege. Unsere Definition der EInteilung der Messbereiche. Klassifizierung Messbereiche beim Messschieber.. Direkt auf das Audit vorbereitet durch Fertigung nach DIN 862 Verlassen Sie sich auf Präzision, die weltweit Standards setzt: Unser Einbaumessschieber erfüllt die Anforderungen der DIN 862 in jedem Detail – von der Materialauswahl über die Fertigung bis hin zur Kalibrierung. Damit garantieren wir exakte Messergebnisse, internationale Zertifikate und höchste Akzeptanz bei Audits und Kundenabnahmen. Qualität, der Sie vertrauen können. Die Messwerkzeuge von Metav IndustryLine werden von unseren Experten für Messwerkzeuge empfohlen. Metav IndustryLine steht für Premium Messwerkzeuge zu einem unschlagbaren Preis. Alle Messwerkzeuge werden nach der Produktion gestestet. Sie sind unsicher, ob das Werkzeug zu Ihrer Anwendung passt?? Oder es fehlen Ihnen noch technische Daten?? Kein Problem, sprechen Sie uns an!! ☎️ Telefon: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Produktspezifikationen zumdigitalen Einbaumessschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Einbaumessschieber Bestellnummer: M218.355 Daten zum Werkzeug: Messbereich: 0 bis 200mm Gewicht: 0,3kg Norm: DIN 862 Ablesung: 0,01mm Datenausgang: RB 5 Ablesung in Inch/Zoll: 0,0005 Genauigkeit: 0,03mm Länge: 330mm Ausführungen Ausführung: digital Material: Messschiene aus Aluminium (30x7,9mm) Digitalanzeige: mit EIN/AUS-, mm/inch- und NULL-Taste Messsystem: kapazitiv waagerecht Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Wichtige Aspekte beim Erwerb eines Messschiebers: Die zusätzliche Ausstattung, darunter Datenausgänge und Messkraftkontrollen, erlangt neben der Genauigkeit und dem Messbereich erhebliche Bedeutung. Messschieber mit spezifizierter Messkraft bietet insbesondere bei Qualitätssicherungsprozessen und in laboratory setups Vorteile. Ebenso sollte man überlegen, ob die Kalibrierung des Messschiebers erforderlich ist. Eine Kalibrierung kann direkt nach Lieferung vorgenommen werden und sollte zur Sicherung der Prozessqualität jedes Jahr erneuert werden.
200mm Digital Internal Groove Caliper With Preset, Stainless Hardened, Plastic Case - Metav IndustryLine
Take advantage of reproducible groove measurements through stainless-steel durability, precise 0.01 mm resolution and fast presetting for consistent quality control; order directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Metav IndustryLine Digital internal groove caliper M240.037.N — 23–200 mm, stainless steel, preset (3 V) A Digital internal groove caliper M240.037.N designed for precise measurement of internal grooves, slots and narrow bores in metalworking and quality assurance environments Digital display with ON/OFF and preset Hardened stainless-steel construction Measuring range 23–200 mm Precision where workshop measurements count The caliper is classified as a standard-range instrument (maximum measuring range 100–300 mm), making it suitable for routine tasks in machine and metal workshops. With a measuring range of 23–200 mm and a display resolution of 0.01 mm, the instrument provides clear numerical readouts that reduce reading errors compared with analogue scales. The hardened stainless-steel construction and metal housing increase resistance to wear and corrosion, while the 70 mm beak length permits reliable access into narrow grooves and slots. These characteristics translate into fewer re-measurements and a steadier production flow for standard-size components. Faster documentation and fewer transcription errors Equipped with a preset function and an integrated RB 5 data output, this digital caliper simplifies zeroing and downstream data capture. Measurements can be stabilised and zeroed quickly on the display, then transferred via the RB 5 interface to a logging system or data collector to maintain traceable records. The combination of a responsive digital readout and a machine-compatible data output streamlines quality-control routines, improving throughput and reducing administrative effort. The 3 V power supply provides compact, long-lasting operation for daily workshop use. Robust design for everyday industrial use Built with a hardened measuring slide and a protective metal housing, the instrument is engineered for the demands of the workshop. The materials and construction ensure dimensional stability and longevity under regular handling. As a precision tool delivered to factory standard, it supports consistent inspection steps and helps avoid costly rework. Metav’s emphasis on accessible precision and a reliable supply chain further supports small and large operations alike, providing quality assurance that aligns with professional workshop practices. Choose the Metav IndustryLine digital internal groove caliper for dependable groove measurement and contact Metav Werkzeuge in Emmerich for tailored advice and swift, reliable delivery — info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: M240.037.N GTIN: 4054469159935 Measuring range: 23–200 mm Resolution: 0.01 mm Weight: 0.4 kg Power supply: 3 V Display: ON/OFF and Zero/Preset Numbers / core technical data Measuring range min: 23 mm Measuring range max: 200 mm Readout increment: 0.01 mm Beak length: 70 mm Unit weight: 0.4 kg Special features Hardened stainless-steel construction with metal housing Digital display with preset function Data output: RB 5 Factory standard delivery Category: calipers FAQ How accurate is the instrument for routine shop measurements? The caliper delivers a 0.01 mm display resolution and is intended for standard workshop precision; its design supports consistent routine measurements for production and inspection. Can measurements be recorded electronically? Yes — the instrument includes an RB 5 data output that facilitates transfer of readings to compatible data-collection systems for traceable documentation. Is the caliper suitable for measuring narrow grooves and slots? The 70 mm beak length and the specific groove-measurement geometry make the tool well suited for internal grooves, slots and similar narrow bores in metalworking. What materials is the caliper made from and how durable is it? Constructed from hardened stainless steel with a metal housing, the caliper is designed for durability and resistance to workshop wear and corrosion. Does this product come from a trusted provider of measurement tools? Metav IndustryLine supplies this caliper as part of a broad precision range; Metav Werkzeuge’s quality control and logistics support supply reliability across workshops and trade customers. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Precision Caliper Absolute 0.01mm Resolution With TIN Coating, ABS System, Four‑Function Measurement, Supplied In Case - Metav IndustryLine
Combine precise 0.01 mm resolution with a TiN-coated, hardened stainless steel build and the ABS absolute measuring system to ensure repeatable workshop measurements and long service life; order the digital caliper directly via Metav Werkzeuge or ask our consultants if needed. M216.246.N Digital caliper — 200 mm, TiN-coated, ABS absolute system (Metav IndustryLine) The M216.246.N Digital caliper is a 200 mm precision workshop instrument for internal, external, depth and step measurements in metalworking and quality control. 0.01 mm resolution on a clear digital display TiN-coated stainless steel for wear resistance Absolute ABS system with Origin and Zero functions Data output RB 5 for integration into systems Accurate measurement for dependable process control A resolution of 0.01 mm and a clear digital readout provide the measurable accuracy required for everyday production and inspection tasks. The caliper's measuring range classifies it as a standard workshop caliper (up to 300 mm), which balances reach and stiffness for typical machine‑shop work. The ABS absolute system maintains the zero reference after battery changes, reducing setup time and avoiding cumulative errors; this rational advantage accelerates throughput and supports consistent quality checks. Robust construction that reduces downtime Manufactured from hardened stainless steel with a TiN coating on contact surfaces and a glass slide on the scale, the instrument is built to withstand regular workshop use while retaining smooth movement and long wear life. The corrosion-resistant materials and hard coating extend service intervals and preserve measurement integrity under industrial conditions. Because the mechanical design is compact and balanced, handling remains precise even during repeated single‑hand measurements, lowering the risk of user‑induced variance. Versatile measurement functions for practical workflows Equipped for four measurement functions — external, internal, depth and step readings — the caliper covers the most common measuring tasks without tool changes. The jaw geometry (jaw length 50/24 mm) and the absolute measurement mode support quick checks on components, fixtures and housings. The ORIGIN, UNIT, ON/OFF and 0/ABS keys on the display simplify mode changes and conversions between millimetres and inches (0.0005 in resolution), improving convenience and reducing cycle time in mixed‑unit environments. Digital integration and shop-floor efficiency The caliper includes RB 5 data output for digital transfer of measurement values to appropriate data loggers or process systems, enabling traceable records and integration into quality workflows. The low‑power 3 V absolute system cuts battery handling and, together with the simple zeroing function, supports uninterrupted measurement runs. The device's conformity to DIN 862 ensures familiar operation and acceptance in standard inspection routines, making it straightforward to integrate into existing metrology setups. For precise, robust 200 mm measuring capability from Metav IndustryLine, contact Metav Werkzeuge in Emmerich to arrange supply or technical advice on integrating the caliper into production workflows. Technical data Article number: M216.246.N GTIN: 4054469160054 Tariff code: 90173000 Standard: DIN 862 Category: Digital caliper Facts Measuring range: 0–200 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.5 kg Battery: 3 V (absolute system) Data output: RB 5 Special features Material: hardened stainless steel, scale with glass slide Coating: TiN-coated contact surfaces Measurement functions: external, internal, depth, step Display functions: ORIGIN, UNIT, ON/OFF, 0/ABS Jaw length: 50/24 mm Usable with or without drive roller Digital readout, workshop class standard FAQ Is the caliper suitable for workshop quality control? The M216.246.N digital caliper is designed to the DIN 862 workshop standard and offers 0.01 mm resolution, making it well suited for routine quality control and inspection tasks. Which measurement functions are available on this instrument? This instrument supports four functions: external, internal, depth and step measurements, enabling diverse checks without swapping tools. What does the RB 5 data output provide? The caliper's RB 5 output allows numerical values to be transmitted to compatible data acquisition systems for documentation and process integration. How does the ABS system benefit daily use? The ABS absolute system preserves the zero reference after battery changes and provides immediate, reliable readings without re‑homing, which reduces setup time in continuous inspection operations. Can the caliper handle demanding shop environments? With a hardened stainless steel construction and TiN-coated measuring surfaces, the caliper resists wear and corrosion typical of industrial use while maintaining smooth operation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Precision Caliper Absolute System, Removable Roller, IP54 - Metav IndustryLine
Benefit from the combination of an absolute measuring system, IP54 protection and a removable drive roller to ensure fast, reproducible workshop measurements; order the caliper via Metav Werkzeuge or consult our advisors for specification matching. Digital caliper 200 mm – Absolute system, IP54, removable roller (Metav IndustryLine) The Digital caliper 200 mm – Absolute system, IP54, removable roller is a robust workshop instrument designed for routine quality control and machining tasks, offering an absolute positioning system and a detachable drive roller for flexible operation. Absolute measuring system, no re-zeroing IP54 protection against dust and splashes Removable drive roller for flexible feeding Resolution 0.01 mm with quick inch/mm switching Reliable, traceable readings through absolute positioning The instrument uses an absolute measuring system, which preserves the reference even after switching off, eliminating the need to re-zero before every run. With a resolution of 0.01 mm (0.0005 in) and a digital readout featuring ON/OFF, 0/ABS, mm/inch and ORIGIN functions, the device provides precise numeric feedback that reduces manual interpretation errors. This translates into shorter cycle times in inspection routines and fewer corrective actions on the shop floor, supporting efficient production control without complex setup. Durable construction built for daily industrial use Constructed from stainless hardened steel with a glass scale, the caliper resists wear and retains mechanical stiffness across its 0–200 mm measuring range—classified as a standard length ideal for everyday machining and metalwork. An IP54 rating protects the electronics against dust ingress and water splashes, making the tool suitable for workshop environments where coolant mist or particulate is present. The detachable drive roller adds practical resilience: it enables operation with or without roller feed and simplifies maintenance without compromising measurement repeatability. Flexible measurement modes and data transfer for quality workflows Equipped for the full set of measuring tasks, the caliper supports four measurement modes—external, internal, depth and step—so a single instrument covers common inspection requirements. The display’s intuitive controls allow rapid toggling between millimetres and inches and instant recall of zero or origin points. For automated data capture, the unit provides a RB 6 data output, facilitating connection to data loggers or inspection software and reducing transcription errors during lot documentation. These capabilities aid traceable quality records and smoother integration into digital workflows. Proven partner reliability and workshop-level precision As part of the Metav IndustryLine, the instrument benefits from a supplier ethos that prioritises accessibility and consistency: Metav supplies a broad range of precision tools and acts as a quality filter for the European market. The compact 200 mm format offers the best compromise between reach and stiffness for general mechanical and metalworking applications, keeping handling straightforward while delivering dependable repeatability. Metav’s long-standing customer base and extensive product range underline the practical value of choosing proven metrology equipment for daily operations. Contact Metav Werkzeuge for advice on integrating the Metav IndustryLine digital caliper M216.226 into existing inspection routines and to arrange purchase or tailored delivery from Emmerich Technical data Article number: M216.226 GTIN: 4054469158297 Category: Calipers Manufacturer: Metav IndustryLine Facts Measuring range: 0–200 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.4 kg Protection class: IP54 Special features Material: stainless hardened steel, scale with glass rail Measuring system: Absolute (3 V) Display: ON/OFF, 0/ABS, mm/inch, ORIGIN Data output: RB 6 Removable drive roller for use with or without roller feed Four measurement modes: external, internal, depth, step Delivery: transport case included FAQ What accuracy can be expected from this caliper? The caliper delivers a resolution of 0.01 mm; combined with the absolute measuring system, the instrument from Metav IndustryLine (SKU M216.226) provides stable, repeatable readings suited to standard workshop tolerances. Does IP54 mean the caliper is suitable for coolant-prone environments? IP54 indicates protection against dust ingress and splashing water; the Metav IndustryLine caliper is therefore appropriate for environments with occasional coolant mist or light splashing, though it is not intended for full immersion. Why is the removable drive roller useful? The detachable drive roller allows operation with or without roller feeding, improving adaptability on conveyor or fixture setups and simplifying maintenance for the Metav IndustryLine digital caliper. Can measurement data be exported electronically? Yes. The caliper includes an RB 6 data output, enabling direct capture of readings into compatible loggers or inspection systems to streamline documentation. Which measurement tasks does the caliper cover? The instrument supports external, internal, depth and step measurements, covering the four common measuring functions required in routine mechanical and quality-control work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Precision Caliper Built-In Horizontal Stainless Steel, 0.01mm Resolution, DIN 862 - Metav IndustryLine
Reliable shop-floor measurement with 0.01 mm resolution, hardened stainless steel construction and a compact built‑in housing for horizontal mounting; order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Digital built-in caliper M218.155.N — 200 mm, hardened stainless (Metav IndustryLine) A Digital built-in caliper M218.155.N designed for horizontal installation and routine workshop measurement tasks 200 mm measuring range, standard workshop length Hardened stainless steel construction Digital display with ON/OFF, ZERO, UNIT, HOLD Conforms to DIN 862, accuracy ±0.03 mm Accurate standard-range measurement for production control The M218.155.N is a 200 mm class caliper that addresses the typical demands of machine and metal workshops by combining a practical measuring span with laboratory‑grade readability. With a resolution of 0.01 mm and an operational accuracy of ±0.03 mm, the instrument delivers repeatable numeric results that simplify pass/fail decisions and reduce rework. The hardened stainless steel construction ensures dimensional stability and resistance to wear, while the compact design suits built‑in horizontal mounting where space is limited. Compliance with DIN 862 provides a familiar reference for procurement and quality documentation. Faster digitised readings and system integration for traceability The compact digital interface reduces transcription errors and accelerates routine checks: the display features ON/OFF, ZERO, UNIT and HOLD controls for immediate, unambiguous readings. Data output is provided via RB 5, enabling simple connection to data collection or SPC systems for batch reporting and process monitoring. Powered by a 3 V cell, the measuring head offers low maintenance and reliable operation in serial inspection or production environments, improving throughput without sacrificing measurement integrity. Robust build and ergonomic fit for everyday use Designed as a built‑in device with a small housing, this caliper balances rigidity and accessibility on the workshop bench or inside fixtures. The hardened stainless steel measuring faces sustain frequent contact and deliver consistent results over time, while the modest weight facilitates installation and reduces strain on mounting points. Classified in the standard range (100–300 mm), the instrument is ideal where reach, stiffness and one‑hand operation must be balanced—making it a pragmatic choice for jigs, fixtures and routine quality control. For an application review or to discuss integration of the Metav IndustryLine digital built‑in caliper M218.155.N into production, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M218.155.N GTIN: 4054469160757 Category: Digital built-in caliper Manufacturer brand: Metav IndustryLine Small housing, horizontal installation Facts Measuring range: 0–200 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Weight: 0.3 kg Power supply: 3 V battery Display: ON/OFF, ZERO, UNIT, HOLD Special features Material: hardened stainless steel Standard: DIN 862 Data output: RB 5 Digital built-in format Compact housing for tight spaces FAQ What measuring range does the caliper cover? The M218.155.N digital built‑in caliper from Metav IndustryLine covers a measuring range of 0–200 mm, making it suitable for standard workshop and machine‑shop tasks. What are the resolution and stated accuracy? The Metav IndustryLine M218.155.N offers a display resolution of 0.01 mm with an operational accuracy of ±0.03 mm, consistent with its intended production‑control role. Can the caliper be connected to data collection systems? Yes, the M218.155.N provides a data output via RB 5 and is powered by a 3 V cell, allowing straightforward integration into SPC or data‑logging workflows. Is the instrument robust enough for daily workshop use? The M218.155.N is built from hardened stainless steel with a compact housing designed for horizontal built‑in mounting, offering durability and repeatable performance for routine inspections. Does the caliper come with a calibration certificate? The M218.155.N meets DIN 862 standards; specific calibration certificates or calibration services can be requested for documented traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Precision Caliper Capacitive System 0.01mm Readout, DIN 862 - Metav IndustryLine
Take advantage of the combination of compact 200 mm range, 0.01 mm resolution and a lightweight aluminium measuring beam for reliable shop-floor measurement. Order the caliper directly via Metav Werkzeuge or consult the sales team for integration advice. M218.265 Digital built-in caliper, 200 mm — aluminium beam & separate display (Metav IndustryLine) The M218.265 is a capacitive digital built-in caliper intended for workshop and production measurement tasks up to 200 mm, supplied with a rugged aluminium profile and a separate external display for flexible mounting and clear readout 200 mm measurement range, workshop standard Capacitive sensor, 0.01 mm resolution Separate external display for easy reading Precise, repeatable readings for routine quality control The instrument uses a capacitive measuring system together with a standard 0.01 mm display resolution to deliver reproducible results suitable for daily inspection and machining tasks. Compliance with DIN 862 ensures the caliper meets recognised workshop tolerances, while the specified accuracy ±0.06 mm provides predictable measurement uncertainty for typical production checks. The capacitive sensing element offers low friction and minimal wear, supporting consistent readings over a long service life without requiring frequent mechanical adjustments. Built for integration and clear operation in confined setups A slim aluminium beam keeps the assembly light and easy to handle while maintaining sufficient stiffness for a 200 mm span; the whole unit weighs approximately 0.45 kg. The separate external display simplifies installation on machines, test fixtures or gauging stands and allows the readout to be positioned where it is most convenient. The digital readout includes ON/OFF, ZERO, mm/inch, ABS and SET functions, and the inch display resolution of 0.0005 in supports quick cross-checks between metric and imperial systems without the need for conversion tables. Standard-range versatility for machine shops and assembly lines Classified as Standard (100–300 mm), this caliper balances reach, rigidity and single-handed usability — characteristics valued in machine- and metalworking environments. The 200 mm measuring span is well suited to component workpieces, fixtures and assemblies that require routine dimensional control. The separate display and capacitive sensing make the instrument a pragmatic choice for inline gauging where mounting flexibility and robust, repeatable readings matter more than submicron laboratory precision. Choose the Metav IndustryLine M218.265 for dependable 200 mm workshop measurement; contact Metav Werkzeuge in Emmerich for technical advice and rapid supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M218.265 GTIN: 4054469163857 Manufacturer: Metav IndustryLine Core data Measurement range: 0–200 mm Resolution: 0.01 mm Resolution (inch): 0.0005 in Accuracy: 0.06 mm Weight: 0.45 kg Standard: DIN 862 Tariff number: 90173000 Special features Measuring beam material: aluminium profile Measuring system: capacitive Display functions: ON/OFF, ZERO, mm/inch, ABS, SET Separate external display for remote readout Digital caliper suitable for workshop and production use FAQ What measurement range does the caliper cover? The M218.265 covers a measuring range of 0–200 mm, placing it in the standard workshop category for general machine‑shop tasks. What resolution and accuracy are provided? The device offers a display resolution of 0.01 mm (0.0005 in) with a specified accuracy of 0.06 mm for routine quality checks. Which measuring standard does the instrument adhere to? Manufactured to the requirements of DIN 862, the caliper meets conventional tolerances expected in industrial measurement applications. What readout and function options are available on the display? The separate external display provides ON/OFF, ZERO, mm/inch, ABS and SET functions for flexible operation and simple unit switching. Is the aluminium measuring beam suited to shop use? Yes; the aluminium profile combines low weight with sufficient stiffness for the 200 mm span, making it practical for shop-floor measurement and easy integration into fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision calipers for accurate, repeatable measurement
Calipers are the indispensable length-measuring tools for industry and workshop environments, enabling fast and exact external, internal, depth and step measurements. Our professional range of precision calipers, including vernier calipers, dial calipers and digital calipers, combines mechanical robustness with modern data handling to support consistent quality assurance.
How these calipers work and where they help most
Analogue vernier calipers deliver reliable, autarkic operation via the vernier scale and are best suited to heavy-duty workshop use where durability matters. Digital calipers provide a contrast-rich display, minimise reading errors and speed up inspection routines through functions such as zero setting and data output. At the high end, touchscreen calipers from Microtech feature an integrated microcomputer, colour touch display, built-in error-tolerance checks and wireless data transmission, making them suited for Industry 4.0 workflows. Workshop calipers with extended measuring ranges offer optional fine adjustment and rounded tips for interior measurements, while in-built calipers can be mounted directly to machines or test rigs to monitor travel. Specialty calipers cover tasks such as deep grooves, pipe wall thickness, brake disc inspection, three-point measurements and bespoke geometries.
Tangible benefits that improve production performance
- Faster throughput: digital calipers with data output reduce manual entry and accelerate quality checks.
- Higher repeatability: robust mechanical design and error-tolerance controls raise measurement consistency.
- Flexible integration: wireless data transmission and touchscreen operation simplify digitisation to existing systems.
- Reduced downtime: workshop and in-built variants with fine adjustment minimise rework and set-up time.
- Application coverage: specialty calipers adapt to complex geometries, from three-point checks to deep-niche measurements.
Microtech and metav — quality and supply you can rely on
For high-end, touchscreen-equipped instruments, Microtech represents the technological benchmark thanks to its integrated controls and wireless capabilities. As a precision partner, Metav complements this with decades of experience and a comprehensive offering: more than 250,000 products, a European quality filter in Emmerich and the trust of over 48,000 customers, making Metav a sensible central source for calipers and measuring equipment.
Quick summary
Calipers — from analogue vernier to touchscreen digital — deliver the measurement accuracy and data connectivity modern production demands while reducing inspection time and improving repeatability.
FAQ
What are the main differences between analogue and digital calipers?
Analogue vernier calipers rely on a vernier scale and are prized for ruggedness and independence from power, whereas digital calipers provide a contrast display, zero setting and data output to eliminate readout errors and speed up quality processes.
Can calipers be integrated into a digital inspection workflow?
Yes. Many digital calipers and touchscreen models support data output and wireless data transmission, enabling direct transfer of measurements into quality-management systems or statistical process control.
Which caliper type is best for large measuring ranges in a workshop?
Workshop calipers with extended measuring ranges and optional fine adjustment are designed for large components; they maintain mechanical stability and are available with rounded interior jaws for safer internal measurements.
Are there calipers for specialised geometries like deep grooves or brake discs?
Specialty calipers are explicitly engineered for such tasks. They feature tailored measuring faces for deep-niche measurements, pipe wall thicknesses, brake-disc checks and three-point or flexible geometries.
How do touchscreen calipers from Microtech improve quality control?
Microtech touchscreen calipers combine an integrated microcomputer, colour touch display and built-in error-tolerance checks with wireless data transmission, allowing immediate verification, reduced human error and seamless digitisation in line with Industry 4.0 practices.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com