Precision calipers for reliable industrial measurement
Precision calipers and their variants provide fast, repeatable outside, inside, depth and step measurements to ensure component conformity and process control on the shopfloor, combining mechanical robustness with digital data handling for traceable results. Designed for use in industrial quality assurance and manufacturing, these calipers serve applications from rough workshop environments to precision inspection, with options such as analogue vernier calipers for durable, battery‑free operation and digital calipers offering clear displays and data output to speed up quality workflows. Specialist formats, including workshop calipers with extended ranges and built‑in mounting calipers for machine or fixture monitoring, extend capability to long strokes and embedded measurement tasks, while bespoke models handle deep grooves, pipe wall thicknesses and three‑point or other complex geometries. The range emphasises highest accuracy and process integration, featuring high‑end touchscreen models with integrated microcomputers, wireless data transfer and Industry 4.0 compatibility to modernise measurement and quality data capture.
2000mm Precision Caliper Colour 2.4" Touchscreen Wireless/USB ISO 17025 Calibration - Microtech Metrology
Benefit from a long‑range measuring solution that combines a 2,000 mm measurement range, lightweight aluminium construction and reliable ISO 17025 calibration for traceable results; order the digital caliper directly via Metav Werkzeuge or consult our specialists for integration advice. Digital Caliper by Microtech Metrology — 2,000 mm, Colour 2.4" Touchscreen Digital caliper for measuring large components and assemblies, designed for workshop, fixture and heavy‑duty metrology applications with integrated data transfer 2,000 mm measurement range Colour 2.4" touchscreen display Wireless and USB data output Delivered with ISO 17025 calibration Precision for large components and repeatable results The instrument delivers a 2,000 mm measuring span while maintaining a practical 0.01 mm resolution and a stated 0.12 mm accuracy, offering a predictable performance envelope for large‑format measurements. Classified in the Long (1,000–2,000 mm) category, this caliper balances reach and handling: the extended beam covers sizeable workpieces without resorting to cumbersome band systems, and the jaw length 1,000 mm supports secure contact on broad features. The specified measuring force 1–20 N provides a usable range that reduces variation from manual pressure and helps standardise measuring technique across operators, which in turn improves repeatability on shop‑floor quality checks. Seamless data capture for modern workflows Equipped with Wireless and USB outputs and a Colour 2.4" touchscreen, the device supports direct digital capture of measurements for statistical process control or inspection reports. The combination of intuitive touch operation and reliable data transfer reduces transcription errors and accelerates data logging into existing inspection software or spreadsheets. As a practical touchpoint for Industry 4.0 upgrades, the connectivity features enable quicker cycle times for quality documentation and simpler traceability chains, turning manual measuring tasks into auditable, transferable datasets. Lightweight design, rugged use and calibrated traceability Constructed from aluminium, the instrument remains manageable at long lengths, lowering operator fatigue while offering sufficient profile stiffness for consistent readings. The design is aimed at repetitive workshop use where manoeuvrability and transportability matter. Importantly, the caliper is supplied fully calibrated to ISO 17025 with a calibration certificate, ensuring measurement traceability and compliance with laboratory or production audit requirements. This delivered certification reduces incoming inspection effort and supports formal quality systems by providing documented measurement uncertainty from the outset. Contact Metav Werkzeuge for detailed technical matching and delivery from Emmerich — request the Microtech Metrology digital caliper (SKU 142120102) with ISO 17025 calibration via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: 142120102 GTIN: 4061905036866 Manufacturer: Microtech Metrology Numerical Data Measuring range: 0–2000 mm Resolution (display): 0.01 mm Stated accuracy: 0.12 mm Measuring force: 1–20 N Jaw length: 1000 mm Design & Features Material: Aluminium Digital display: Colour 2.4" touchscreen Data output: Wireless and USB Delivered calibrated: ISO 17025 certificate included Digital instrument: yes FAQ Is the caliper supplied ready for use in a certified inspection? Yes. The Microtech Metrology digital caliper (SKU 142120102) is delivered fully calibrated to ISO 17025 and includes the calibration certificate for immediate use in certified inspections. What connectivity options are available for data logging? Measurements can be exported via Wireless or USB, enabling direct capture into inspection software or data collection systems from the Microtech Metrology digital caliper. Is the instrument suitable for workshop measurements of large fixtures and housings? Yes. With a 2,000 mm measuring range and a jaw length of 1,000 mm, the caliper is intended for large components, fixtures and assemblies commonly found in machine and mould making. How does the stated measuring force affect results? The 1–20 N measuring force range helps limit variation from operator pressure; using consistent measuring force improves repeatability when using the Microtech Metrology digital caliper. What advantages does the aluminium construction provide? Aluminium reduces weight for long‑range handling while maintaining sufficient stiffness for reproducible measurements, making the instrument easier to manoeuvre on the shop floor. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2000mm Workshop Caliper Colour 2.4" Touchscreen Wireless USB ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of 2,000 mm measuring range, ISO 17025 calibration certificate, and wireless data output for reliable, traceable measurements of large components; order the long-range workshop caliper directly via Metav Werkzeuge or contact our consultants for application advice. Workshop caliper — long-range digital caliper by Microtech Metrology with 2,000 mm range and 2.4" colour touchscreen Workshop caliper is a long-range digital measuring instrument designed for precise dimensional checks on large workpieces in heavy workshops and fixture fabrication. 2,000 mm measuring range for large components 2.4" colour touchscreen display ISO 17025 calibration certificate included Wireless and USB data output for integration Accurate large-scale measurement with industrial reliability The 2,000 mm measuring span classifies this instrument in the Long caliper category, making it suitable for large-format components where reach and repeatability matter. The gauge provides a resolution of 0.01 mm on its display, which is the standard for digital calipers used in production control. The extended jaw geometry and the 300 mm long jaw allow reliable access into deep bores and recesses, reducing the need for secondary fixtures and saving process time. As a result, inspection cycles for sizeable assemblies become more efficient without sacrificing consistency. Seamless data integration for traceable workflows Equipped with Wireless and USB outputs and a clear 2.4" touchscreen, the instrument simplifies data capture and transfer to quality-management systems. Digital readout and direct export of measurement values reduce transcription errors and accelerate documentation of inspection reports. The combination of wireless transfer for convenience and USB for secure wired connections supports both shop-floor flexibility and office-level traceability, which is particularly valuable in regulated production environments and when maintaining audit trails. Workshop-proof design that endures daily use The caliper is built for the workshop: hand-finished measuring jaws ensure a precise contact geometry, while the overall construction resists the knocks and contamination typical of industrial surroundings. The specified measuring force 1–20 N offers a controlled contact pressure range to limit variation from operator handling; this helps maintain reproducible results across multiple operators. Robust engineering protects the measuring system against premature wear, lowering maintenance needs and supporting steady production output. Certified calibration for measurement certainty Delivered with an ISO 17025 calibration certificate, the instrument meets the highest international laboratory standard for calibration services. ISO 17025 certification confirms that measurements were carried out under accredited laboratory conditions and that a traceable calibration certificate is supplied with the device. This ensures immediate suitability for quality-control tasks that require documented metrological traceability and supports compliance with internal QA procedures and external audits. For precision inspections of large parts choose Microtech Metrology's long-range workshop caliper and contact Metav Werkzeuge for tailored purchasing advice and technical clarifications — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 141020256 GTIN: 4061905038761 Manufacturer: Microtech Metrology Display: Color 2.4" touchscreen Calibration: ISO 17025 certificate included Facts Measuring range: 0–2000 mm Resolution (readout): 0.01 mm Measuring force: 1–20 N Jaw length: 300 mm Special features Digital instrument Wireless + USB data output Hand-finished measuring jaws FAQ What is the usable measuring range of this caliper? The caliper offers a measuring range of 0–2000 mm, providing suitability for large-format components and assemblies. Does the instrument arrive calibrated and with documentation? Yes, the instrument is supplied fully calibrated with an ISO 17025 certificate, ensuring traceable measurement results for quality assurance. Which data interfaces are available for measurement transfer? Measurement values can be transferred via Wireless connection or USB for secure and flexible data integration. How fine is the readout resolution on the display? The digital readout provides a 0.01 mm resolution, matching common industrial standards for digital calipers. Are the measuring jaws suitable for workshop use? The device features hand-finished measuring jaws, designed for durable contact geometry and reliable results in a workshop environment. Which manufacturer produces this caliper and what is the SKU? The caliper is produced by Microtech Metrology and is listed under SKU 141020256. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2000mm Workshop Caliper Monoblock Fine Adjustment 0.05mm Vernier, Hardened Stainless Steel, 200mm Jaws, in Case - Metav IndustryLine
Take advantage of the combination of a 2,000 mm measuring range, hardened stainless-steel construction and a monoblock slide with fine adjustment to measure large components reliably; order the item directly via Metav Werkzeuge or contact our consultants for application advice. Workshop caliper M201.380 — long-range, hardened stainless steel with fine-adjustment The M201.380 workshop caliper is a long-range analogue measuring instrument designed for large-format components in heavy machining, fixture making and mould work. 2,000 mm measuring range Hardened stainless steel construction Fine-adjustment thumbwheel Monoblock slide for maximum rigidity Stable measurement for large components and assemblies The long-format design offers a generous 2,000 mm measuring range, making this instrument suitable where extended reach and repeatability are required. The monoblock slide reduces play and flex, so long-distance measurements remain reproducible across the full travel. The combination of a rigid one-piece slide and a hardened stainless-steel body with a matt-chrome scale provides both corrosion resistance and a durable, low-reflection readout that is easier to read under workshop lighting. This configuration is aimed at professional workshops and production environments that need dependable results on large workpieces. Precise mechanical reading with dual vernier scales The analogue vernier arrangement includes a 1/128" scale on the upper side and a 1/20 mm scale on the lower side, enabling both imperial and metric readings without electronics. The metric vernier corresponds to a readable increment of 0.05 mm, the common industrial standard for mechanical calipers, and is therefore suited to general workshop metrology and routine quality checks. The fine-adjustment thumbwheel ensures controlled closure of the jaws for consistent contact force, reducing human-induced variation during critical comparisons and setup tasks. Built to standard and engineered for workshop use The jaw length of 200 mm places the instrument within the testing scope of DIN 862 for calipers with that jaw size, meaning the product meets established mechanical tolerances for vernier calipers in this configuration. The absence of pointed tips (flat jaw style) focuses the tool on external, internal and step measurements of broad profiles rather than fine-pointed probing. The robust construction tolerates everyday use on the shop floor while preserving scale legibility and mechanical function over long service intervals. Practical benefits for production and inspection workflows As a non-electronic measuring tool, the device removes reliance on batteries and avoids issues with display failure; it is therefore a low-maintenance option for continuous operation. The fine-adjustment system combined with the monoblock slide increases operative speed for repetitive checks while maintaining the 0.05 mm reading granularity required in many production environments. Where long-range dimensional verification is frequent, this caliper supports faster set-ups, fewer tool changes and a smoother inspection routine. Specify the Metav IndustryLine M201.380 for long-range workshop measurement and contact Metav Werkzeuge for tailored delivery and application advice from Emmerich. Technical Data Article number: M201.380 GTIN: 4054469102047 ECLASS: 21170344 Manufacturer: Metav IndustryLine Material: hardened stainless steel with matt-chrome scale Type: analogue vernier workshop caliper Facts Measuring range: 0–2000 mm Jaw length: 200 mm Nonius: 1/128" (top) and 1/20 mm (bottom) Metric readable increment: 0.05 mm Conforms to DIN 862 for jaw length up to 200 mm Special features Monoblock slide for increased rigidity Fine-adjustment thumbwheel for controlled contact Hardened stainless-steel construction for durability Matt-chrome scale for reduced reflection and clear reading Flat jaws (without pointed tips) for broad-surface measurements FAQ What measurement range does this caliper cover? The M201.380 covers a measuring range of 0–2000 mm, designed for long-format inspection and layout tasks. What precision can be expected from the mechanical vernier? The lower vernier corresponds to a readable increment of 0.05 mm, providing the customary industrial mechanical precision for workshop calipers. Is the instrument suitable for heavy workshop environments? Yes, the hardened stainless-steel body and monoblock slide of the M201.380 are engineered to withstand demanding shop-floor use while keeping the scale legible. Which measurement tasks is this caliper intended for? The M201.380 is intended for external, internal and step measurements on large components, fixtures and assemblies where extended reach and stiffness are required. Does the caliper meet any standards? For the given jaw length of 200 mm the instrument conforms to DIN 862 specifications for mechanical vernier calipers. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2000mm Workshop Caliper With Points 200mm Jaws 0.05mm Graduation Fine Adjustment Monoblock In Hardened Stainless Steel, Supplied In Case - Metav IndustryLine
This long-range monoblock caliper combines a 2,000 mm measuring span with hardened stainless steel and a fine-adjustment spindle for reproducible large-format measurements. Order the workshop caliper directly via Metav Werkzeuge or ask our consultants if needed. Workshop caliper M201.341 (Monoblock, 2,000 mm) – Metav IndustryLine The Workshop caliper M201.341 is a long-range, monoblock precision caliper engineered for reliable large-component measurement in demanding workshop and toolroom environments. Monoblock design for high rigidity Hardened stainless steel construction Fine-adjustment spindle for precise locking Delivered in protective case for transport Built for reproducible large-format measurement The caliper’s 2,000 mm measuring span classifies it in the Long category of workshop calipers, where profile stiffness is essential for repeatable results on sizeable components. The monoblock construction increases torsional rigidity and reduces deflection over the full travel, which translates to fewer measurement errors when checking long shafts, housings or fixtures. For production and inspection workflows this means faster measurement cycles and a lower risk of scrap due to unstable readings. Precise mechanical control and readable scale This instrument uses an analogue vernier arrangement with a nominal 0.05 mm resolution, matching the industrial standard for robust workshop measurement. The combination of a matt chrome scale and hardened stainless steel surfaces resists wear while maintaining clear, low‑glare graduations for repeatable readings. The integrated fine‑adjustment spindle allows smooth, minute closing control so incremental positioning is adjusted without over‑tightening; this preserves both accuracy and operator ergonomics. The dual vernier notation (1/128" top and 1/20 mm bottom) supports cross-referencing values in inch and metric contexts. Durable features for everyday workshop handling The caliper is supplied with dedicated measuring tips and extended jaws (200 mm jaw length) that aid access into deeper recesses and maintain contact stability on larger profiles. Delivery in a protective case ensures safe transport between workstations and helps protect the instrument against shock and contamination during handling. The design follows the DIN 862 guidance for jaw geometry up to 200 mm, with longer lengths manufactured to workshop standard to preserve measuring integrity across the instrument’s span. Practical use, maintenance and workshop benefits This instrument suits tasks such as checking long rails, fixture set-ups, bearing journals and casing assemblies where a long travel and rigid guideway are decisive. Routine care — wiping the guide surfaces clean, avoiding impacts and storing the caliper in its case after use — preserves the matt chrome scale and hardened surfaces. The simple mechanical construction makes on‑site adjustments straightforward and reduces dependency on batteries or electronics, supporting continuous operation in production environments. Contact Metav Werkzeuge in Emmerich for detailed specification advice and to discuss how the 2,000 mm monoblock caliper can be integrated into workshop inspection routines — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: M201.341 GTIN: 4054469101880 eClass: 21170344 Facts Measuring range: 2,000 mm Resolution: 0.05 mm Jaw length: 200 mm Vernier: 1/128" (top), 1/20 mm (bottom) Norm: DIN 862 (jaw length up to 200 mm; from 250 mm to workshop standard) Special features Monoblock construction Hardened stainless steel with matt chrome scale Fine‑adjustment spindle Measuring tips (points) Supplied in protective transport case FAQ What measurement range does the caliper cover and how is it classified? The instrument provides a 2,000 mm measuring range and is classified as a Long workshop caliper, designed for large-format components and assemblies. What level of precision can be expected from this analogue caliper? The analogue vernier offers a resolution of 0.05 mm, an industrial standard suitable for routine workshop inspection and reliable dimensional checks. Is the caliper suitable for deep or recessed measurements? Yes. The extended jaws (200 mm jaw length) and pointed measuring tips facilitate access to deeper recesses and help maintain stable contact on larger parts. How does the fine‑adjustment spindle improve measurement reliability? The fine‑adjustment spindle enables controlled closing and micro‑positioning, reducing the risk of overpressure and operator-induced variability during setting and locking. How is the caliper protected during transport? The instrument is delivered in a protective case to guard against impact and contamination while moving between workstations or sites. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2000mm Workshop Caliper Without Tips Monoblock Fine Adjustment 0.05mm Jaw Length 300mm Stainless Hardened Matt Chrome Scale, DIN 862 - Metav IndustryLine
Combine the monoblock construction, a fine‑adjustment screw and the extended 0–2000 mm measuring range to achieve reliable, repeatable long‑span measurements in workshop environments. Order the instrument directly via Metav Werkzeuge or contact our consultants for specification advice and delivery options. Workshop Caliper without Tips M201.381 – Long‑range 0–2000 mm, 300 mm jaws (Monoblock) A Workshop Caliper without Tips built for long‑span measurements and heavy workshop use, featuring a monoblock beam and a fine‑adjustment mechanism for precise incremental positioning. Monoblock hardened stainless steel beam Fine‑adjustment screw for precise positioning Transport case included for safe handling Accurate long‑span measurement for heavy workshop parts The caliper’s 0–2000 mm measuring range addresses large components that standard workshop instruments cannot reach. Its monoblock beam design increases profile stiffness so that measurements remain reproducible over long spans; this reduces deflection and improves repeatability when handling sizeable castings, housings or fixtures. The result is a dependable long‑range tool that bridges the gap between routine shop calipers and specialised length‑measuring systems. Simple, reliable vernier operation with fine adjustment This instrument is an analogue vernier caliper with a dual scale arrangement: Vernier 1/128" (upper) and 1/20 mm (lower), offering a practical readable division and a nominal 0.05 mm resolution for workshop control tasks. The integrated fine‑adjustment screw enables controlled approach and exact seating of the jaws before reading, which reduces user‑induced error and speeds up repetitive measuring cycles. For users familiar with vernier technique, the mechanical design gives fast, tactile feedback without electronics. Designed for workshop handling and transport safety Constructed from hardened stainless steel with a matt‑chromed scale, the caliper stands up to workshop conditions and resists corrosion while keeping scale legibility high. The 300 mm jaws provide deep reach where longer jaw geometry is needed, and the instrument is supplied in a transport case (plastic or wooden) for secure handling and storage—note that wooden cases for tools of this size are intended primarily for transport. The combination of robust materials and protective packaging supports daily use on the shop floor. Standards, scope and practical benefits The caliper is dimensioned and marked in accordance with recognised workshop practices; the declared norm is DIN 862 for shorter jaw lengths, while units with extended jaw lengths follow the manufacturer’s workshop standard when jaw length exceeds 250 mm. This long‑range solution delivers practical traceability for workshop inspection routines and, together with Metav’s product range, simplifies procurement and stock‑keeping for machines and jigs. The SKU M201.381 identifies the specific long‑span variant for ordering and inventory purposes. For application advice or to request a tailored quote for the Metav IndustryLine M201.381 long‑range caliper, contact Metav Werkzeuge in Emmerich—our specialists will advise on integration, delivery and packaging options. Technical Data Article number: M201.381 GTIN: 4054469102054 ECLASS: 21170344 Facts Measuring range: 0–2000 mm Jaw length: 300 mm Resolution: 0.05 mm Vernier: 1/128" (upper) / 1/20 mm (lower) Special features Material: hardened stainless steel with matt‑chromed scale Monoblock beam construction Fine‑adjustment screw Delivery in transport case (plastic or wooden) Conforms to DIN 862 up to 200 mm; >250 mm according to factory standard Category: Long‑range caliper (workshop) FAQ What measuring range does this caliper cover? The caliper covers 0–2000 mm, making it suitable for long‑span workshop measurements and large assemblies. Is the instrument suitable for heavy workshop use? Yes. The M201.381 features a monoblock hardened stainless‑steel beam and matt‑chromed scale designed for robust, repeated use in workshop conditions. How precise is the reading on this vernier caliper? The instrument provides a practical workshop resolution of 0.05 mm, with the vernier arrangement of 1/128" (upper) and 1/20 mm (lower) to aid fast, reliable readings. Does the caliper come protected for transport? The caliper is supplied in a transport case (plastic or wooden) to ensure safe handling during delivery; wooden cases for larger tools are primarily intended for transport rather than permanent storage. Which standard applies to this caliper? Shorter jaw variants follow DIN 862; for this long‑jaw version (300 mm jaws) the device is produced according to the manufacturer’s workshop standard for extended jaw lengths. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2000mm Workshop Digital Caliper 2.4" Colour Touchscreen, Wireless/USB, ISO 17025 Calibration - Microtech Metrology
Take advantage of the combination of a 2,000 mm measurement range, colour touchscreen with wireless and USB data output, and full ISO 17025 calibration for immediate use in traceable quality control. Order the Workshop Caliper directly via Metav Werkzeuge or ask our consultants for application advice. Workshop Caliper by Microtech Metrology — 2,000 mm range, 2.4" colour touchscreen The Workshop Caliper is a long-range digital caliper engineered for precise measurement of large components in workshops and toolrooms, combining robust handling with traceable calibration. 2,000 mm measurement range Colour 2.4" touchscreen display Wireless and USB data output Delivered fully calibrated to ISO 17025 Accurate measurements for large components Classified as Long (measurement range up to 2,000 mm), this instrument is designed for measurements of sizeable workpieces where stiffness and repeatability matter. The extended span permits inspection of large housings, fixtures and assemblies while the construction balances reach with usability to keep handling straightforward. The specified measurement force 1–20 N helps to maintain consistent contact pressure across different measurement tasks, reducing variability and improving reproducibility for routine quality checks. Seamless digital workflow and documented traceability Equipped with a 2.4" colour touchscreen and both Wireless and USB data interfaces, the caliper integrates into modern measurement routines and supports direct data capture to inspection software or spreadsheets. The unit is supplied fully calibrated to ISO 17025, with a calibration certificate included, enabling immediate use in documented inspection processes and simplifying audits. These features minimise transcription errors and support a clear audit trail for production control. Workshop-ready design and repeatable operation Built for regular workshop use, the caliper features handcrafted measuring jaws and a fine adjustment mechanism for controlled closing action, improving tactile feedback and alignment when measuring edges or steps. The combination of robust materials and careful finishing reduces wear at the contact faces and sustains measurement quality over time. Ergonomic aspects and straightforward controls make the instrument suitable for machinists and quality technicians who need reliable, repeatable readings without complex setup. For a detailed specification and to discuss the Microtech Metrology workshop caliper with its ISO 17025 calibration, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a technical consultation or tailored quotation Technical data Article number: 141020216 GTIN: 4061905038983 Manufacturer: Microtech Metrology Facts Measurement range: 0–2,000 mm Measuring force: 1–20 N Jaw length: 150 mm Display: 2.4" colour touchscreen Special features Digital data output via Wireless and USB Fine adjustment mechanism Handcrafted measuring jaws Delivered calibrated to ISO 17025 with certificate FAQ What measurement range does the caliper cover? The workshop caliper covers a measuring range of 0–2,000 mm, making it suitable for large-format components. Is a calibration certificate included with delivery? Yes, the instrument is delivered fully calibrated to ISO 17025 and includes the calibration certificate for traceability. How can measurement data be exported from the caliper? Data can be transferred wirelessly or via USB to inspection software or data logging systems for seamless documentation. Are the measuring faces robust enough for regular workshop use? The caliper features handcrafted measuring jaws designed for durability and consistent contact geometry in daily inspection tasks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Built-In Digital Caliper Color 1.54" Touchscreen, Wireless/USB, IP54 - Microtech Metrology
Take advantage of high-resolution measurement (0.001 mm) combined with Wireless + USB data transfer and a splash-protected housing for reliable integration into production lines. Order the built-in caliper directly via Metav Werkzeuge or consult our specialists for system adaptation. Built-in digital caliper by Microtech Metrology — Colour touchscreen & Wireless + USB The built-in digital caliper is a machine‑integration ready measuring instrument for shop‑floor quality control and fixture-mounted applications. Colour 1.54" touchscreen display Wireless and USB data output Resolution 0.001 mm, accuracy 0.012 mm IP54 splash-protected design Seamless integration for automated measuring Designed for straightforward installation in fixtures and machines, this built-in caliper simplifies digitised measurement workflows. The Wireless + USB outputs allow direct connection to data loggers, SPC systems or PCs, reducing manual transcription and accelerating inspection cycles. With an IP54 rating the unit tolerates typical workshop dust and splash exposure, maintaining dependable operation in production environments. The compact integration format supports retrofit and new‑build applications where space and repeatability are critical. Precision and repeatability for routine quality checks Engineered for reliable shop‑floor accuracy, the instrument combines a fine resolution of 0.001 mm with a stated accuracy of ±0.012 mm, making it suited for standard mechanical and metalworking inspections. High display resolution provides clear, immediate readings while the accuracy figure defines the expected measurement uncertainty in documented checks. This balance of fine readout and practical accuracy supports traceable quality control without over‑specifying instruments for everyday workshop tasks. Faster measurement, less paperwork The large Colour 1.54" touchscreen offers intuitive operation and rapid visual confirmation of values, lowering training time and reducing user errors. Digital transfer via Wireless + USB eliminates manual entry and enables automated data capture for batch documentation or process feedback loops. The device's standard‑range format (0–200 mm) aligns with common workshop needs, delivering the reach and stiffness typical for universal caliper tasks while supporting efficient part handling and faster inspection throughput. Discuss integration and ordering with Metav Werkzeuge to specify the Microtech Metrology built-in digital caliper equipped with Wireless + USB for robust, traceable measurements on the shop floor. Technical data Article number: 142502141 GTIN: 4061905458828 Manufacturer: Microtech Metrology Facts Measurement range: 0–200 mm Resolution: 0.001 mm Accuracy: ±0.012 mm Display: Colour 1.54" touchscreen Protection class: IP54 Special features Data output: Wireless + USB Digital display Standard‑range caliper (100–300 mm) Built‑in design ECLASS: 21170344 FAQ What environments is this caliper suitable for? The built-in digital caliper is designed for workshop and industrial shop‑floor conditions; its IP54 rating protects against dust and splashes typical in machining and assembly areas. Can measurement data be exported automatically? Yes — the instrument supports both Wireless and USB outputs for direct export to PCs, SPC systems or data loggers, enabling automated traceability and reduced manual input. What measurement range and precision does the device offer? The caliper covers 0–200 mm with a resolution of 0.001 mm and an accuracy of ±0.012 mm, offering fine readout and dependable repeatability for standard quality tasks. Who manufactures this instrument and how is it identified? This measuring instrument is produced by Microtech Metrology and is listed under article number 142502141 (GTIN 4061905458828). Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Built-In Digital Caliper Colour 1.54" Touchscreen, IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of certified measurement reliability and modern data transfer in a compact, workshop‑ready instrument: calibrated to ISO 17025, the unit delivers ±0.015 mm accuracy and both Wireless + USB outputs for streamlined quality control. Order the caliper directly via Metav Werkzeuge or consult Metav’s specialists for integration advice. Built-in digital caliper by Microtech Metrology — 1.54" touchscreen, Wireless + USB A built-in digital caliper offering calibrated precision and direct data transfer for standard machine‑shop and inspection tasks. Colour 1.54" touchscreen display Wireless and USB data output ISO 17025 calibration with certificate Certified accuracy for repeatable inspection results The built‑in digital caliper is supplied fully calibrated to ISO 17025, including a calibration certificate that documents traceability and measurement validity. With a stated accuracy of ±0.015 mm and an indicated reading increment of 0.005 mm, the instrument provides a balance between practical resolution and industrial reliability. This level of performance reduces the need for repeat measurements and supports consistent pass/fail decisions in production control, making it suitable for routine dimensional checks and incoming‑goods inspections where traceable results are required. Seamless data handling to reduce transcription errors Equipped with Wireless + USB data outputs and a 1.54" touchscreen colour display, the instrument simplifies capture and transfer of measured values. Digital output eliminates manual entry, speeding up documentation and lowering the risk of transcription mistakes during batch inspections. The touchscreen shows clear readouts and quick menus for unit conversion and zeroing; combined with the wireless link, this allows measurements to be logged directly into inspection software or spreadsheets, supporting efficient quality workflows on the shop floor. Robust construction for daily workshop use Constructed from stainless steel and rated IP54 for protection against dust and splashes, the caliper is designed for the realities of a busy workshop. The 0–200 mm measuring range places it in the Standard class of calipers, which is the preferred balance between reach and rigidity for general machine‑shop duties. The compact, mountable format suits fixed inspection stations or integrated measuring fixtures where stable, repeatable readings are required without sacrificing durability. Practical applications and integration benefits This caliper is well suited to metalworking, component inspection and quality assurance tasks where certified results and seamless data capture are priorities. The device integrates into existing inspection routines thanks to its wired USB option for direct connection and wireless capability for flexible measurement setups. Microtech Metrology’s calibrated instrument is therefore a pragmatic choice where documented accuracy and reliable data flow deliver measurable improvements in throughput and traceability. Contact Metav Werkzeuge in Emmerich for delivery details, assistance with integration and to receive the ISO 17025 calibration certificate supplied with this Microtech Metrology instrument Technical Data Article number: 142502140 GTIN: 4061905037009 Manufacturer: Microtech Metrology Facts Measuring range: 0–200 mm Accuracy: 0.015 mm Resolution: 0.005 mm Display: Colour 1.54" touchscreen Protection class: IP54 Special features Material: stainless steel Data output: Wireless + USB Digital instrument ISO 17025 calibration certificate included FAQ Is the caliper delivered with a calibration certificate? Yes. The caliper is delivered fully calibrated to ISO 17025 and includes the calibration certificate from Microtech Metrology. What data interfaces are available for integration? The instrument provides Wireless + USB outputs to support both wireless logging and wired data capture into inspection systems. What accuracy and resolution can be expected in daily use? The instrument specifies ±0.015 mm accuracy with a display increment of 0.005 mm, offering reliable results for standard workshop and inspection tasks. Which measuring range category does the caliper belong to? With a 0–200 mm range, the caliper falls into the Standard class, suited to general metalworking and machine‑shop applications. Is the device suitable for use in a production environment? Yes. The stainless steel construction and IP54 rating make it robust enough for workshop conditions, and the digital outputs support fast data capture for production inspection. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm DataMet E-Force Precision Caliper 0.0005mm Resolution, Wireless USB, ISO17025 Cal Cert - Microtech Metrology
Benefit from high-frequency data capture and sub-micron resolution together with a force‑controlled measuring routine for consistent throughput and fewer reworks; the caliper’s wireless and USB connectivity simplifies reporting and traceability. Order the instrument directly via Metav Werkzeuge or ask the consultants for tailored configuration and integration support. DataMet eFORCE 1–20N Precision Caliper — Wireless + USB, 0.0005 mm resolution (Microtech Metrology) The DataMet eFORCE 1–20N is a high‑resolution precision caliper designed for workshop and laboratory quality control, combining force‑regulated measurement with Industry 4.0‑ready data transfer for seamless process integration. Industry 4.0-ready with wireless data transfer Force-controlled measurement 1–20 N Swiss reading system, 0.0005 mm resolution ISO 17025 calibration certificate included Consistent sub‑micron accuracy for repeatable quality Built around a Swiss reading system, the instrument offers an ultra‑fine resolution of 0.0005 mm (0.5 μm) selectable with coarser steps for routine tasks; this makes the device suitable for demanding dimensional inspection where repeatability is critical. The integrated E‑Force control module regulates contact pressure between 1–20 N, reducing variation from operator technique and improving statistical process control. Together, resolution and force control yield measurable reductions in scatter and rework, supporting faster production cycles and tighter tolerance adherence. Streamlined data flow for modern inspection workflows The caliper is prepared for contemporary data environments: wireless data transfer to the MDS app (Windows, Android, iOS, macOS) and standard USB HID options mean measurement values are captured directly into spreadsheets, QMS software or PLC systems without manual transcription. A built‑in memory manager stores up to 2,000 values with folder organisation and basic statistics, enabling batch documentation on the shop floor. The onboard MICS system with a hi‑res 2.0” colour touchscreen provides visual guidance for Go/No‑Go, max/min logging and formula evaluations, accelerating decision making in incoming inspection and in‑process checks. Robust design and user‑focused ergonomics for everyday use Manufactured from stainless steel with hand‑finished measuring surfaces (Ra <0.32 μm), the instrument balances wear resistance and gentle contact with components. The caliper’s measuring capacity places it in the standard range for general machine‑shop tasks, offering reach and stiffness ideal for 150–200 mm workshop staples. A rechargeable Li‑Pol battery with USB‑C charging and data connection supports prolonged use and simplifies replenishment of mobile fleets; the compact jaw geometry (50/17 mm) remains practical for internal, external and depth measurements while preserving rigidity. Traceability and calibration to support regulated processes A calibration certificate is supplied with the instrument, issued to recognised standards and referencing ISO 17025 (Ilac MRA) for laboratories requiring documented traceability. The caliper’s stated accuracy on external jaws and conformity of internal jaw and depth accuracy to ISO 13385‑1 facilitate confident integration into audit routines and quality documentation. These credentials make the device suitable for subcontract inspection tasks, toolroom setups and quality labs where formal calibration records are required. Contact Metav Werkzeuge for advice on integrating the Microtech Metrology DataMet eFORCE caliper into the production line or to request configuration options and delivery from Emmerich. Technical data Article number: 141088020A Name: DataMet eFORCE 1–20N Messschieber 0–150x0.0005 Wireless + USB (Schweizer Präzisionssystem) Manufacturer: Microtech Metrology Delivery content: Messwerkzeug; Free Versions of MDS App; USB Data/Charging Cable; Calibration Protocoll Facts Measurement range: 0–200 mm Resolution: 0.0005 mm (selectable 0.0005 / 0.001 / 0.01 / 0.1 mm) Measurement force: 1–20 N Accuracy (genauigkeit): 0.008 mm Jaw length: 50/17 mm Memory capacity: 2,000 values Battery: Rechargeable Li‑Pol (500 mAh) Special features Industry 4.0 adopted DataMet E‑Force caliper with computerized MICS system and hi‑res 2.0” colour touchscreen SWISS made reading system with sub‑micron capability Functions: Analog scale, Preset, Graphic, Go/NoGo, Max/Min, Formula, Timer, Linear correction, Temperature correction, Resolution select, Connection indication Memory manager with folders and statistics mode; memory data transfer E‑Force control module with force selection, AUTO‑Force and force indication Wireless data transfer: Wireless to MDS app, Wireless HID, Wireless HID + MAC USB data transfer: USB HID, USB HID + MAC Stainless steel construction with hand‑finished measuring surfaces (Ra <0.32 μm) USB‑C data/charging socket Calibration certificate included (ISO 17025 (Ilac MRA)) Accuracy statement for external jaws; internal jaws and depth per ISO 13385‑1 FAQ What resolution and accuracy does the instrument offer? The caliper provides a selectable resolution down to 0.0005 mm with an accuracy figure listed as 0.008 mm and verified measurement behaviour on external jaws; this combination supports fine tolerance checks in component inspection. Is force compensation available and why does it matter? Yes — the integrated E‑Force module regulates contact force between 1–20 N and offers AUTO‑Force modes; force control reduces operator‑induced variation and improves repeatability for serial measurements. How are measurement values exported from the caliper? Values can be exported via wireless transfer to the MDS app (Windows, Android, iOS, macOS) or by USB HID (keyboard emulation) to any application; the onboard memory manager also stores up to 2,000 readings for later transfer. Does the device come with a calibration certificate? A calibration certificate is supplied with the instrument and references ISO 17025 (Ilac MRA) for laboratories requiring accredited traceability. Which workshops or applications suit this caliper best? The instrument is aimed at machine shops, toolrooms and quality laboratories needing standard‑range calipers with high resolution, documented calibration and networked data capture for process control. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Depth Caliper Digital Touchscreen, Wireless USB, IP54, ISO 17025 Calibration - Microtech Metrology
Take advantage of a precision instrument that combines ISO 17025 traceable calibration, robust IP54 protection and flexible Wireless + USB data export; the combination ensures reliable workshop throughput and documented measurement results. Order the calibrated depth caliper directly via Metav Werkzeuge or consult the Metav specialists for application advice. Depth Caliper — digital depth gauge with colour touchscreen and wireless + USB transfer (Microtech Metrology) The Depth Caliper is a digital depth gauge designed for standard workshop and laboratory use, pairing a colour 1.54" touch display with wireless and USB connectivity for fast, documented depth measurements. Colour 1.54" touchscreen display Wireless and USB data output Calibrated to ISO 17025 with certificate IP54 protection against dust and splashes Precision and traceability for routine quality control This depth measuring instrument delivers 0.02 mm accuracy with a fine 0.005 mm reading step, making it suitable for industrial quality tasks while remaining easy to handle. Calibrated and supplied with an ISO 17025 certificate, the device supports traceable measurements and audit requirements; calibration documentation is included with the tool to simplify quality records. The solid technical basis reduces rework and supports faster inspection cycles in production environments. Robust design for the workshop environment Designed for everyday use, the instrument features IP54 protection and hand‑finished measuring jaws, combining environmental resilience with true contact geometry. The guarded slider and sturdy frame maintain measurement stability across repeated cycles, while the surface treatment helps resist contaminants in busy shops. This balance of durability and precision maintains consistent measurement results across shifts and operators. Faster data flow, fewer transcription errors Equipped with Wireless + USB data output and a colour touchscreen, the gauge enables direct transfer of readings to inspection software or a PC, reducing manual entry and associated errors. The intuitive display accelerates routine checks and the wireless option supports semi‑automated data capture on the shop floor. For traceability and statistical process control, this direct data path streamlines documentation and shortens measurement-to-decision time. Range classification and typical applications With a measuring range of 0–200 mm, the instrument falls into the standard category for machine and metalworking tasks — a common choice for 150/200/300 mm shop bases. It is intended for depth measurements on components, fixtures and housings where a blend of reach and stiffness is required. The calibrated unit is well suited for workshop quality control, component inspection and maintenance tasks that demand documented, repeatable depth readings. For traceable, workshop‑ready depth measurement choose the Microtech Metrology depth caliper calibrated to ISO 17025 — contact Metav Werkzeuge in Emmerich for purchasing and application guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: 1432010207 GTIN: 4061905039065 Brand: Microtech Metrology Calibrated: ISO 17025 certificate included Facts Measuring range: 0–200 mm Reading step: 0.005 mm Accuracy: ±0.02 mm Display: Colour 1.54" touchscreen Special features Data output: Wireless + USB Protection class: IP54 Hand‑finished measuring jaws Digital depth gauge / calibrated instrument eClass: 21170344 FAQ Is the gauge delivered calibrated? Yes. The depth caliper from Microtech Metrology is delivered fully calibrated with an ISO 17025 calibration certificate included. What is the usable measuring range and typical application? The instrument covers 0–200 mm and is classified as a standard caliper range, suitable for machine‑shop depth measurements, fixture checks and component inspection. How are measurements exported to a PC or inspection system? Readings can be exported via the built‑in Wireless interface or the USB connection for direct capture into inspection software or spreadsheets. What protection does the housing provide in a workshop? The unit is rated IP54, offering reliable resistance against dust ingress and water splashes commonly encountered in production environments. Are the measuring jaws suitable for repeated workshop use? Yes. The caliper features hand‑finished measuring jaws designed to retain geometry and ensure consistent contact across repeated measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Depth Caliper E‑Ink Display, 0.02mm Accuracy, IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of certified accuracy, robust protection and low‑power readability for reliable depth measurements in production and quality control. Order the depth caliper directly via Metav Werkzeuge or ask the consultants for application advice. Depth Caliper — E‑Ink Display, ISO 17025 Calibrated (Microtech Metrology) The Depth Caliper is a digital depth gauge designed for standard workshop and machine‑tool measurements with a measuring range up to 200 mm, combining rugged protection and laboratory‑grade traceability. E‑Ink display for clear, long battery life ISO 17025 calibration with certificate included IP54 splash and dust protection Hand‑finished measuring jaws for stable contact Certified traceability for production quality The instrument is supplied fully calibrated to ISO 17025 standards and includes a calibration certificate, which supports traceability in documented quality processes. With a stated accuracy of 0.02 mm and a fine 0.005 mm reading, the device meets the demands of standard workshop inspection and routine quality assurance. The calibration by a recognised laboratory reduces uncertainty and simplifies acceptance into inspection routines, making the tool suitable for documented incoming inspection, process checks and traceable measurement records. Clear legibility and robust operation on the shop floor An E‑Ink display provides high contrast and excellent readability under workshop lighting while consuming very little power, so the display remains readable even after long intervals in storage. The housing meets IP54 protection, providing reliable resistance against dust ingress and splashes that commonly occur in production environments. Hand‑finished measuring jaws ensure consistent contact geometry, which reduces measurement scatter when assessing recessed features or deep bores. Practical range and handling for everyday tasks Classified in the Standard category for calipers, the 0–200 mm measuring span balances reach and stiffness for typical machine‑shop and metalwork applications. The depth‑oriented measuring design is optimised for flat surfaces and stepped features; the slim slider and compact beam profile maintain handling comfort and minimise deflection during measurement. The combination of the 200 mm range and the instrument’s mechanical refinement supports repeatable results across a broad set of workshop tasks. Integration into inspection routines and documentation The digital output and established calibration protocol facilitate incorporation into quality workflows and documentation. The included calibration certificate documents conformity to measurement standards, which is beneficial for internal audits and supplier qualification. The robust construction and precise sliding elements reduce rework and sampling frequency by improving first‑pass measurement reliability, thereby supporting efficient production monitoring and quality control. Contact Metav Werkzeuge for technical comparison, calibration options or to request the ISO 17025 certificate for this depth caliper; ordering and specialist advice are available from Metav Werkzeuge. Technical data Article number: 1432010208 GTIN: 4061905455797 Manufacturer: Microtech Metrology E‑class: 21170344 Facts Measuring range: 0–200 mm Resolution / reading: 0.005 mm Accuracy: 0.02 mm Protection rating: IP54 Special features Digital caliper with E‑Ink display Hand‑finished measuring jaws Supplied with ISO 17025 calibration certificate Depth measuring function Category: Digital calipers FAQ What measurement accuracy can be expected from this caliper? The depth caliper from Microtech Metrology is specified with an accuracy of 0.02 mm and a reading resolution of 0.005 mm, suitable for standard workshop and quality‑control tasks. Is a calibration certificate supplied with the instrument? Yes — the delivery includes an ISO 17025 calibration certificate documenting traceability and conformity to recognised laboratory standards. How does the E‑Ink display benefit everyday use? The E‑Ink display offers clear contrast and very low power consumption, improving legibility on the shop floor and extending battery life for the Microtech Metrology depth gauge. Can this instrument be used in damp or dusty environments? The depth gauge is rated IP54, providing protection against dust intrusion and splashes, making it well suited for typical workshop conditions. Which product identifiers are relevant for ordering or inventory? Refer to SKU 1432010208 and GTIN 4061905455797 for ordering and inventory management of the Microtech Metrology depth caliper. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Dial Caliper 0.01mm Resolution, Four-Function Measurement, DIN 862, Supplied in Case - Metav IndustryLine
Benefit from the combination of a 0.01 mm dial readout, a 0–200 mm measuring range and four measurement modes for dependable workshop results; order the Dial Caliper "TOP" directly via Metav Werkzeuge or consult the company's advisors for application-specific guidance. Dial Caliper "TOP" — 0–200 mm, 0.01 mm dial readout (Metav IndustryLine) A Dial Caliper "TOP" designed for precise mechanical measurements in general workshop and fine‑mechanical tasks, offering a robust analogue dial and standard 0–200 mm range. Mechanical dial readout, 0.01 mm resolution External, internal, depth and step measuring Standard 0–200 mm range per DIN 862 Locking screw and thread table on reverse Precision where it counts: accurate analogue measurement for production The instrument delivers a 0.01 mm readout via a clearly graduated dial readout, providing consistently reproducible values for routine quality control and assembly work. Built to the DIN 862 standard, the caliper combines a standard 0–200 mm measuring span with a compact dial that gives crisp, mechanical feedback without reliance on batteries. This makes the tool particularly suitable for environments where reliability and simple, repeatable measurement are required; the analogue display reduces the risk of electronic failure and keeps calibration procedures straightforward. Practical versatility: four measuring functions for everyday tasks With four measurement functions — external, internal, depth and step — the caliper is a versatile companion for general machine‑shop tasks and small‑parts inspection. The pair of precision jaws (50/24 mm tip configuration) and the depth probe cover common workshop situations, while the locking screw secures the slider for transfer measurements. The reverse side carries a thread table to aid quick reference when working with threaded parts, reducing time spent consulting separate charts and improving workflow efficiency on the shop floor. Designed for handling and long‑term dependability A robust mechanical design with a 38 mm dial face and a single‑turn indicator provides an intuitive reading experience and fast cross‑checks during series work. The analogue caliper is easy to operate with one hand and its simple construction minimises downtime and maintenance needs — a practical advantage for busy production lines. Supplied with a protective transport case, the tool is ready for workshop use and safe storage between jobs, supporting good workshop practice and repeatable measuring conditions. For tailored advice on integrating the Dial Caliper "TOP" into existing inspection routines, contact Metav Werkzeuge to discuss specifications and suitability for your applications. Technical data Article number: M202.134 SKU: M202.134 GTIN: 4054469102337 Type: Dial caliper (analog) Measuring range: 0–200 mm Resolution/readout: 0.01 mm Standard: DIN 862 Facts Dial diameter: 38 mm Jaw length: 50/24 mm Measuring range max: 200 mm Readout resolution: 0.01 mm Special features 4-function measuring: external, internal, depth, step Locking screw Thread table on reverse side Supplied in protective transport case Analogue dial with single-turn indicator Conforms to DIN 862 FAQ How accurate is the Dial Caliper "TOP" for everyday workshop use? The Dial Caliper "TOP" provides a mechanical readout to 0.01 mm and conforms to DIN 862, offering the accuracy expected for standard workshop quality control and assembly tasks. Can the caliper measure internal and depth dimensions as well as external ones? Yes, the instrument supports external, internal, depth and step measurements, making the Dial Caliper "TOP" a versatile tool for a wide range of measuring tasks. Is the caliper ready for use straight away and how is it supplied? The Dial Caliper "TOP" is supplied ready for workshop use and comes in a protective transport case for secure storage and safe handling between jobs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Dial Caliper 0.01mm Resolution, Four‑Function Measurement, DIN 862, Supplied in Case - Metav IndustryLine
Combining 0.01 mm resolution, a 38 mm precision dial and reliable four-way measurement capability, this dial caliper delivers repeatable results across standard workshop tasks; order the dial caliper (SKU M202.034) directly via Metav Werkzeuge or ask our consultants if needed. Metav IndustryLine Dial Caliper M202.034 — 0–200 mm, 0.01 mm resolution, 38 mm dial A dial caliper (M202.034) designed for precise workshop and quality-control measurements across the standard 0–200 mm range. Dial caliper 0–200 mm, 0.01 mm resolution 38 mm dial for quick, precise visual readings Four measurement functions: inside, outside, depth, step Conforms to DIN 862, robust workshop standard Precision that speeds quality control The instrument features a 0.01 mm graduation that supports fine inspection tasks while remaining intuitive for routine checks. The analogue dial gives an immediate visual confirmation of the measurement and avoids battery dependency, so shifts and repeated cycles in workshop environments remain uninterrupted. Built to the DIN 862 standard, the tool bridges bench-top accuracy and shop-floor robustness, enabling faster in-process verification without recourse to more elaborate metrology equipment. Built for workshop reliability and repeatability Mechanical construction prioritises stable jaw alignment and low play, which reduces measurement scatter during repetitive checks. The 38 mm dial enhances readability under varied lighting, while the solid slide action keeps readings steady when handling medium-sized components. This combination of visible feedback and mechanical stability translates into fewer re-measures and a smoother production workflow, especially where consistent tolerances are required across a batch. Versatile measurement for everyday tasks Equipped for four-way measurement — external, internal, depth and step — the caliper covers the most common inspection routines without swapping tools. The standard 0–200 mm range places it in the universal workshop category, offering the best compromise between reach and rigidity for typical machining, assembly and maintenance applications. A thread reference table on the reverse face supports quick cross-checks during fittings and fastenings, reducing the time spent searching for specifications. Practical aids that shorten cycle time Design details such as a clear dial, concise graduations and accessible jaws facilitate swift clamping and reading of parts, helping to cut inspection times. The mechanical nature of the device means minimal maintenance: occasional cleaning and light lubrication keep the slide accurate over long service intervals. For teams that value dependable, low-complexity tools, this caliper supplies straightforward, traceable measurement capability without the overhead of electronic systems. For dependable workshop metrology choose the Metav IndustryLine dial caliper M202.034 — contact Metav Werkzeuge for tailored advice and procurement from Emmerich. Technical data SKU: M202.034 GTIN: 4054469102238 Eclass: 21170344 Article number: M202.034 Facts Measuring range: 0–200 mm Resolution: 0.01 mm Dial diameter: 38 mm Weight: 0.47 kg Standard: DIN 862 Special features Analogue dial caliper Four measurement functions: outside, inside, depth, step Thread table on reverse side Mechanical construction for workshop use FAQ Is this caliper suitable for general workshop use? Yes. The Metav IndustryLine dial caliper M202.034 is designed for standard workshop applications with a 0–200 mm range and conforms to DIN 862. Can this caliper perform internal and depth measurements? Yes. The caliper supports four measurement functions — external, internal, depth and step — enabling versatile checks without additional tools. Does the instrument require batteries? No. The analogue dial mechanism on the caliper operates mechanically and does not need batteries, ensuring continuous operation in production settings. How fine are the graduations and what accuracy can be expected? The caliper offers a 0.01 mm graduation; combined with its mechanical stability and DIN 862 conformity, it is well suited for routine precision control in a workshop environment. Is there any reference information on the tool itself for thread sizes? Yes. A thread table is provided on the reverse side of the instrument to assist with quick checks during assembly and maintenance tasks. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Dial Caliper 0.02mm Resolution, Four-Function Measurement, DIN 862, Delivered in Case - Metav IndustryLine
Take advantage of the combination of high-resolution measurement (0.02 mm), a 200 mm measuring range and four measurement functions for reliable workshop control and repeatable results; order the instrument directly via Metav Werkzeuge or consult the Metav advisers for specification support. Metav IndustryLine Dial Caliper M202.033 – 200 mm, 0.02 mm resolution The Metav IndustryLine Dial Caliper M202.033 is a compact analogue caliper designed for standard machine‑shop and precision metalwork measurements, offering versatile inner, outer, depth and step measurement capability. 200 mm measuring range according to DIN 862 0.02 mm graduation with 38 mm dial Four measurement functions: inside, outside, depth, step Robust analogue movement for workshop use Proven fit for everyday workshop measurement needs This dial caliper sits in the standard measurement class (measuring range up to 300 mm), delivering the preferred balance of reach, stiffness and one‑hand usability for general machine‑ and metalwork. The 200 mm range covers the most common inspection tasks while retaining the handling characteristics that make quick checks and routine quality control efficient. Compliance with DIN 862 gives a recognised baseline for expectations in industrial environments and helps ensure compatibility with established measuring procedures. Reliable precision and clear readout for repeatable results With a 0.02 mm graduation presented on a 38 mm dial, the instrument provides a clear visual indication of fine increments while the analogue mechanism keeps the measurement chain straightforward and dependable. The caliper supports four measurement functions — outer, inner, depth and step — so a single tool can replace several more specialised gauges, reducing time spent switching instruments and improving process flow. The combination of high resolution and a substantial dial diameter simplifies reading in workshop conditions where speed and clarity matter. Durable construction and practical handling features The analogue drive is engineered for smooth sliding action and positive locking, giving dependable repeatability without the need for power sources; the analogue display means no batteries are required. Practical details such as the jaw geometry (schnabellänge 50/22 mm) and a thread table on the reverse add day‑to‑day usefulness for machining and inspection tasks. The mechanical design focuses on long service life and straightforward maintenance, so uptime in production or the toolroom is maximised. Where this caliper excels in application This instrument is particularly suited to workshops that require a blend of fine measurement capability and robust tool life: bench work, small assembly lines, fixture adjustment and precision repair all benefit from the instrument’s precision and versatility. Its analogue nature makes it ideal where a simple, low‑maintenance measuring tool is preferred over electronic devices, and the sizeable dial keeps readings accessible even under demanding shop conditions. For a tailored recommendation or to purchase the Metav IndustryLine dial caliper (SKU M202.033), contact Metav Werkzeuge for expert advice from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: M202.033 GTIN: 4054469102221 eClass: 21170344 Tariff code: 90173000 Facts Measuring range: 0–200 mm Graduation: 0.02 mm Dial diameter: 38 mm Standard: DIN 862 Special features Analogue dial display (no batteries) Four measurement functions: inside, outside, depth, step Jaw length: 50/22 mm Thread chart on reverse side Analogue (mechanical) operation FAQ What measurement functions are available with this caliper? The caliper offers four functions — outside, inside, depth and step measurement — enabling versatile use with the Metav IndustryLine dial caliper M202.033. What resolution and dial size does the instrument provide? Readings are at 0.02 mm graduation on a 38 mm diameter dial, giving a clear, fine incremental display suitable for workshop inspection. Is the caliper compliant with recognised standards? Yes, the tool is specified to DIN 862, which aligns it with common industrial measuring requirements for calipers in the standard class. Does the caliper require batteries or electrical power? No — the analogue dial mechanism of this caliper operates mechanically and requires no batteries, simplifying maintenance and ensuring readiness. Is there any reference information on the tool itself to aid selection? A thread chart is printed on the reverse side of the instrument, and jaw geometry (50/22 mm) is indicated to assist with application planning for common workshop tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Dial Caliper 0.02mm Resolution, Four-Function Measurement, DIN 862, Supplied in Case - Metav IndustryLine
Benefit from the combination of 0.02 mm reading accuracy, a clear analog dial and practical four‑way measurement for reliable, repeatable checks in everyday workshop use. Order directly via Metav Werkzeuge or consult their advisors for application support and purchasing. Dial Caliper "TOP" 200 x 0.02 mm — Analog dial caliper, DIN 862 compliant The Dial Caliper "TOP" 200 x 0.02 mm is an analogue dial caliper designed for standard workshop measurement tasks, offering straightforward readability and robust mechanical operation according to DIN 862 Analog dial display, 0.02 mm resolution Measuring range 0–200 mm, standard class Four-way measurement capability Locking screw, thread table on reverse Accurate measurements that reduce rework and downtime The instrument is built for precise repeatability in routine inspection tasks: the 0–200 mm range places it in the standard caliper class, which balances reach and stiffness for most machine‑shop and metal‑fabrication work. With a calibrated reading step of 0.02 mm, the device provides clear, comparable results for external, internal and depth checks, helping to cut rework and accelerate quality control cycles. Compliance with DIN 862 gives a recognised reference for tolerances and acceptance criteria. Practical features for faster inspection workflows A large 38 mm dial improves legibility at the bench, while the mechanical design supports four‑way measurement (external, internal, depth and step) for versatile part inspection. The integrated locking screw secures the slide for transfer measurements and the thread table on the reverse offers a quick reference for common thread sizes during rapid checks. The analogue mechanism avoids battery dependence and keeps setup simple for repetitive measuring operations. Built for dependable workshop use and backed by Metav This caliper combines robust mechanical engineering with user‑oriented details so that routine measuring tasks stay consistent and fast. As part of Metav IndustryLine, the instrument benefits from a distribution and quality filter centred in Emmerich, supporting fleet procurement and reliable supply. Metav’s broad selection and long experience make this tool a practical choice for workshops that value traceable measurement, straightforward handling and sustained availability Contact Metav Werkzeuge for tailored advice on workshop adoption and procurement of the Metav IndustryLine Dial Caliper "TOP" — reach out at info@metav-werkzeuge.com or call +49 2822 7131930 for product guidance and order coordination Technical data Article number: M202.133 GTIN: 4054469102313 ECLASS: 21170344 Customs tariff number: 90173000 Norm: DIN 862 Facts Measuring range: 0–200 mm Reading / resolution: 0.02 mm Dial diameter: 38 mm Display: analog Four‑way measurement: yes Special features Locking screw Thread table on reverse Analogue dial mechanism SKU: M202.133 FAQ How accurate is the caliper for routine workshop measurements? The Dial Caliper "TOP" delivers a reading resolution of 0.02 mm and meets DIN 862 standards, providing the repeatability expected for standard workshop and machine‑shop quality checks. Which measurement types can be performed with this instrument? The unit supports four‑way measurement: external, internal, depth and step measurements are all possible with the same analogue caliper, enabling flexible inspection workflows. Is the instrument suitable for use in metalworking environments? Yes, the caliper’s 0–200 mm range and mechanical design make it well suited to metalworking and general machining tasks where a robust, easy‑to‑read instrument is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Dial Caliper Three-Point 0.02mm Resolution 4-Function Measurement, DIN 862, Plastic Case - Metav IndustryLine
Reliable workshop measurement combining a 200 mm measuring range, 0.02 mm reading accuracy and DIN 862 conformity for consistent routine checks. Order the dial caliper directly via Metav Werkzeuge or consult our specialists for application advice. Uhren‑Messschieber TOP 200 × 0.02 mm — Dial caliper with 200 mm range and 0.02 mm resolution (Metav IndustryLine) The Uhren‑Messschieber TOP 200 × 0.02 mm is a precision dial caliper engineered for standard workshop and quality‑control tasks, offering a clear analogue display and practical features for repeatable measurements. Precision dial caliper, 200 mm range 0.02 mm reading resolution Compliant with DIN 862 measuring standard Locking screw and rear thread table included Reliable precision for everyday workshop control The TOP dial caliper provides consistent accuracy with a reading step of 0.02 mm, placing it in the upper range of mechanical precision for analogue instruments. Designed to support standard production and inspection routines, the instrument’s compliance with DIN 862 gives a verifiable reference for measurement protocols and documentation. This results in fewer rework cycles and a measurable improvement in process reliability when used as a regular inspection tool. Clear visual feedback and secure handling for repeatable readings A clearly marked 38 mm dial and tactile slide design deliver fast, unambiguous readings that reduce interpretation errors during rapid checks. The integrated locking screw secures a measured value for transfer or marking, while the mechanical dial avoids battery dependency and simplifies maintenance. Together these features support faster throughput and reduce the risk of lost measurement data in busy workshop environments. Versatile four‑function measuring for multiple tasks Equipped for inside, outside, depth and step measurements, the caliper replaces several single‑purpose gauges in routine workflows. The four‑way capability streamlines tool sets and shortens setup time for changeovers. A thread table on the reverse adds practical reference data for threaded parts, helping to speed up decisions without reaching for additional documentation. Built to integrate with established workshop practices The analogue design combines robust mechanical construction with familiar operation, making it suitable for conventional machine shops and vocational training environments. Marked as a standard‑range caliper (up to 200 mm), it offers the best balance between reach and stiffness for everyday metalworking tasks. The instrument’s straightforward layout and DIN conformity facilitate inclusion in inspection routines and work instructions. Contact Metav Werkzeuge today for tailored advice on integrating the TOP dial caliper into existing inspection routines — our Emmerich team will support selection and practical application guidance Technical data Article number: M202.143 Brand: Metav IndustryLine GTIN: 4054469102375 eClass: 21170344 Tariff number: 90173000 Facts Measuring range: 0–200 mm Resolution / reading: 0.02 mm Dial diameter: 38 mm Reading system: Analog (dial) Standard: DIN 862 Special features Four measurement functions: inside, outside, depth, step Locking screw included Thread table on reverse side Analogue design for battery‑free operation FAQ What measurement functions are covered by this caliper? The device performs inside, outside, depth and step measurements; the TOP dial caliper (SKU M202.143) supports these four functions for versatile workshop use. How precise is the analogue display? The analogue dial reads in 0.02 mm increments, providing high mechanical resolution suitable for routine quality checks and production control. Is the caliper suitable for standard machine‑shop inspection routines? Yes. The caliper’s 200 mm range and DIN 862 conformity make it well suited to everyday inspection tasks in machine and metal workshops. Does the caliper include any features to help transfer or retain measurements? A locking screw secures the slide for transfer or marking, and a thread table on the reverse provides quick reference data for threaded components. Which brand and SKU identify this instrument for ordering and documentation? The instrument is supplied by Metav IndustryLine, identified as M202.143, and listed under GTIN 4054469102375 for ordering and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Absolute Precision Caliper With mm/inch, ABS/INC, Depth Gauge, Locking Screw, CR2032 Battery - Filetta
Compact, workshop-ready measuring performance with a 0–200 mm range and ±0.03 mm accuracy combined with a clear digital readout and a protective case for safe storage — order directly via Metav Werkzeuge or consult our specialists for application advice. Filetta MS910.469 digital caliper — 0–200 mm range, 0.03 mm accuracy The Filetta MS910.469 digital caliper is a robust measuring instrument for standard workshop and engineering tasks, engineered for precise outside, inside and depth measurements in metalworking and general assembly. 0–200 mm measuring range Resolution 0.01 mm, accuracy 0.03 mm Depth gauge and 50 mm jaw length Supplied in protective case with CR2032 battery Precise results for everyday workshop demands The MS910.469 is classified in the Standard measuring-range group (up to 300 mm), offering the typical balance of reach and rigidity required in machine shops and metalworking departments. With a resolution of 0.01 mm and an indicated accuracy of ±0.03 mm, the instrument supports reliable dimensional checks on shafts, housings and finished parts. The digital display shows readings in mm/inch and provides ABS/INC switching plus a reset function, reducing reading errors and speeding throughput on repetitive tasks. The thumbwheel drive enables fine, controlled movement while the locking screw secures measurements for transfer or recording. Built to reduce handling errors and speed inspection Engineered features such as the integrated depth gauge, 50 mm jaw length and the driven thumbwheel focus on repeatable operation and ease of use under production conditions. The caliper’s display modes and reset function help to avoid conversion mistakes between metric and imperial units, supporting faster decision-making on the shop floor. Where traceable checks are essential, the device’s consistent mechanical behaviour and clear readout contribute to lower scrap rates and fewer reworks, offering measurable efficiency gains in quality-control workflows. Robust storage and simple field service The instrument is supplied in a protective case and includes a ready-to-use CR2032 battery, simplifying delivery and first-use handling. The compact case protects the caliper during transport and on-site storage, ensuring the measuring faces and electronics remain intact between operations. Maintenance consists of routine cleaning of the guides and replacement of the battery when required; the straightforward construction avoids complex service needs, making this caliper a practical choice for workshops seeking dependable everyday precision. For application guidance or to secure the Filetta MS910.469 through Metav Werkzeuge, contact the Emmerich team by phone or email for prompt, workshop-focused assistance and ordering support Technical data Article number: MS910.469 Brand: Filetta Type: Digital caliper Measuring range: 0–200 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display: mm/inch, ABS/INC, reset Battery: 1x CR2032 Jaw length: 50 mm Depth measurement: yes Thumbwheel drive: yes Locking screw: yes Supplied in protective case: yes Facts Measuring range: 0–200 mm Resolution: 0.01 mm Accuracy: 0.03 mm Jaw length: 50 mm Battery type: CR2032 Special features Digital readout with mm/inch conversion ABS/INC and reset functions Depth-gauge measurement Thumbwheel for fine adjustment Locking screw for repeatable readings Supplied in protective case with battery FAQ Is the caliper suitable for general machine-shop use? The Filetta MS910.469 digital caliper is designed for standard machine-shop and metalworking tasks, offering a 0–200 mm range and accuracy suited to workshop QC and assembly measurements. What measurement types are possible with this caliper? The instrument supports outside, inside and depth measurements; the depth gauge and the 50 mm jaw length enable a wide range of common inspection tasks. How precise are the readings shown on the display? Readings present at 0.01 mm resolution with an indicated accuracy of ±0.03 mm, making the caliper appropriate for routine precision checks where this tolerance meets specification. Is a protective case supplied and is the caliper ready to use? Yes, the caliper is supplied in a protective case and includes a fitted CR2032 battery for immediate use. Does the caliper offer metric and imperial units? The digital display switches between mm and inch and includes ABS/INC and reset functions to simplify unit conversions and zero-setting. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
200mm Digital Built-In Caliper Vertical Stainless, Bidirectional Measurement, DIN 862 - Metav IndustryLine
Take advantage of the combination of a capacitive measuring system, clear digital readout and DIN 862 conformity to keep production checks fast and reliable; the 200 mm measuring range balances reach and rigidity for everyday workshop tasks. Order the caliper directly via Metav Werkzeuge or ask our consultants if needed. Digital built-in caliper M218.255 (Metav IndustryLine) — capacitive, 200 mm The Digital built-in caliper M218.255 is a vertical, capacitive 200 mm precision caliper designed for standard workshop and production measurement to DIN 862. Capacitive measuring system 200 mm measuring range DIN 862 compliant Data output RB 5 Consistent accuracy for reliable production control The instrument delivers a measured accuracy of ±0.03 mm with a display resolution of 0.01 mm, which places it within the expectations for industrial quality control. The 200 mm span classifies the device as a standard-length caliper, offering an optimal trade-off between reach and stiffness for machining and metalwork. The capacitive measurement principle helps maintain repeatability under typical shop conditions, so tolerance checks remain consistent across shifts and operators. Integration and handling that streamlines inspection A compact digital display with ON/OFF, mm/inch, ABS (zero), TOL, DIR and HOLD keys provides immediate control over measurement mode and tolerance checks, reducing operator steps during inspection routines. The built-in design suits vertical mounting and the RB 5 data output facilitates connection to data collection or SPC systems, so measured values can be recorded automatically for process documentation. This capability saves time and supports traceable quality records. Robust construction for everyday workshop use Made in a stainless configuration and complying with DIN 862, the caliper is built for routine shop handling and regular use within production environments. The device permits measurement in both directions, which simplifies repetitive tasks and reduces reorientation time for series inspection. Together, these attributes lower the risk of measurement-related delays and help sustain a steady production flow. Choose the Metav IndustryLine caliper for dependable process control and contact Metav Werkzeuge in Emmerich for technical advice or supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M218.255 GTIN: 4054469111865 Label: Digital built-in caliper, 200 mm, vertical, stainless; DIN 862 Manufacturer: Metav IndustryLine Facts Measuring range: 0–200 mm Display resolution: 0.01 mm (0.0005 inch) Stated accuracy: ±0.03 mm Measurement system: capacitive Special features Digital display with ON/OFF, mm/inch, 0/ABS, TOL, DIR, HOLD keys Data output: RB 5 Measurement in both directions possible Compliant with DIN 862 Category: caliper (Messschieber) ECLASS: 21170344 FAQ What level of accuracy can be expected from this caliper? The Digital built-in caliper M218.255 is specified with an accuracy of ±0.03 mm and a display resolution of 0.01 mm, suitable for standard workshop quality control. Can the caliper send measurements to a data system? Yes — the device provides an RB 5 data output, enabling integration with data collection or SPC systems for automatic recording of measured values. Is the instrument suitable for both metric and imperial measurements? The built-in digital display supports both mm/inch modes via a dedicated key, allowing quick switching between units during inspection. Does the caliper require a specific mounting orientation? This model is designed as a vertical, built-in caliper for installation where a vertical orientation is needed; the design supports straightforward integration into fixtures and inspection stations. Is the caliper compliant with industry standards? The instrument is delivered in a version that conforms to DIN 862, providing assurance for routine measurement tasks in machining and metalworking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper 0.01mm Readout With Fractional 1/128" Display, Stainless Hardened, Supplied In Case - Metav IndustryLine
Combine hardened stainless-steel construction, 0.01 mm resolution and four‑way measurement for reliable workshop control and repeatable results; order the caliper directly via Metav Werkzeuge or consult the Metav team for application advice. Digital Caliper M216.062 (200 mm / 8'') – Fractional 1/128", RB 2 The Digital Caliper M216.062 is a standard‑range digital caliper for workshop and machine‑tool measurement, providing metric and fractional inch readouts and a compact, hardened design suitable for routine quality checks. Resolution 0.01 mm digital display Fractional readout 1/128" mode Hardened stainless‑steel construction Four‑way measurement capability Supplied in protective transport case Precise numeric feedback for routine quality control The electronic display offers a fine 0.01 mm step, with inch resolution of 0.0005" / 1/128", enabling fast, unambiguous readings for pass/fail checks and documented inspections. The integrated mm/inch switch and the zeroing function simplify comparative measurements against templates or gauges, while the fractional mode supports traditional drawing references. This measurable accuracy reduces rework by clarifying tolerances at the point of measurement. Robust workshop design with standard‑range benefits Classified in the standard range for its 200 mm reach, the instrument balances reach and stiffness for everyday metalworking tasks. The body is made from hardened stainless steel, providing corrosion resistance and long service life in workshop environments. The caliper supports internal, external, depth and step measuring thanks to its four‑way capability, and the jaw geometry (jaw length 50/24 mm) remains stable under normal handling. Supplied in a protective case, it is prepared for safe transport between workstations. Data handling and integration to speed up workflows Equipped with an interface labelled RB 2, the device facilitates data transfer to documentation systems and reducing manual transcription. The display includes on/off, zero and mm/inch keys for quick operation during batch inspection. As part of the Metav IndustryLine, the caliper M216.062 is positioned for dependable workshop integration, offering a pragmatic balance of measurement clarity and connectivity that supports efficient production control. Contact Metav Werkzeuge for a technical match to specific workflows or to arrange procurement from Metav IndustryLine; email info@metav-werkzeuge.com or call +49 2822 7131930 for consultancy and delivery details Technical data Article number: M216.062 GTIN: 4054469110196 Eclass: 21170344 Data output: RB 2 Display functions: On/Off, Zero, mm/inch Facts Measuring range: 0–200 mm Resolution: 0.01 mm Inch resolution: 0.0005" or 1/128" Jaw length: 50/24 Tariff number: 90173000 Special features Material: hardened stainless steel Four‑way measurement: internal, external, depth, step Supplied in protective transport case Digital fractional mode (1/128") Workshop‑oriented design for routine inspection FAQ What measurement range does this caliper cover? The caliper covers a measuring range of 0–200 mm, suited to standard workshop tasks and general machine‑building applications. Is the instrument capable of four different measurement types? Yes, the instrument supports internal, external, depth and step measurements thanks to its four‑way measuring design. What data output options are available for documentation? The caliper provides an RB 2 data output interface for transferring readings to documentation systems. Which materials is the caliper made from? The caliper is manufactured from hardened stainless steel, offering corrosion resistance and durability for workshop use. Does the display offer fractional inch readout? Yes, the display includes a fractional inch mode showing 1/128" and a decimal inch representation of 0.0005". Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper 75mm Jaws Fine Adjustment 0.01mm Display Stainless Steel In Plastic Case - Metav IndustryLine
Take advantage of a hardened stainless-steel construction combined with a precise digital display and a smooth fine adjustment for reliable workshop measurements; the factory tolerance of 0.03 mm ensures consistent repeatability. Order the device directly via Metav Werkzeuge or consult the Metav team for application-specific advice. Digital Caliper M217.050.N — 200 mm, fine adjustment (Metav IndustryLine) The Digital Caliper M217.050.N is a 200 mm workshop caliper with digital readout, fine adjustment and hardened stainless-steel construction, designed for routine precision measurement in metalworking and maintenance environments. 200 mm measuring range for workshop use Hardened stainless-steel construction Fine adjustment for smooth, precise positioning Digital display with ON/ZERO/UNIT/HOLD Reliable reach and repeatable accuracy for the workshop The caliper sits in the Standard class (measuring range up to 100–300 mm) and provides a balanced combination of reach and stiffness that suits general machining and quality-control tasks. With a measuring span of 200 mm and a display resolution of 0.01 mm (0.0005 in), the instrument delivers repeatable readings that speed up routine checks and reduce rework. The declared factory standard 0.03 mm gives a transparent performance expectation for incoming inspection and first-article checks, supporting efficient decision-making on the shop floor. Faster measurement cycles with a clear, usable display A tactile fine adjustment mechanism permits controlled jaw movement for delicate positioning, while the digital display with ON/OFF, ZERO, UNIT and HOLD functions simplifies readout and recording. Inch/metric switching is available, with the inch resolution shown as 0.0005 in, so mixed-measurement workflows are supported without conversion errors. The instrument includes a 3 V power system for stable operation and a dedicated RB 5 data output for straightforward digital transfer to collection systems, reducing manual transcription and improving traceability in production logs. Durable build for everyday industrial use Manufactured from fully hardened stainless steel, the caliper resists wear and maintains alignment under repetitive use; the 75 mm jaw length provides secure contact for general external and internal measurements while the design omits a scribing tip for straightforward handling. At approximately 0.8 kg, the tool balances robustness with manoeuvrability, making it suitable for bench use and carried inspection rounds. The construction and controls were chosen to lessen operator influence on results and to provide a dependable measuring routine across shifts. For dependable everyday precision, specify the Metav IndustryLine Digital Caliper M217.050.N — contact Metav Werkzeuge GmbH in Emmerich for technical consultation or a tailored offer via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M217.050.N GTIN: 4054469159720 Label: Digital caliper, 200 x 75 mm, without scribe, 3 V INOX, fine adjustment, factory standard 0.03 mm Core specifications Measuring range: 0–200 mm Resolution: 0.01 mm / 0.0005 in Jaw length: 75 mm Weight: 0.8 kg Factory tolerance: 0.03 mm Power supply: 3 V Special features Material: fully hardened stainless steel Fine adjustment for precise jaw positioning Digital display with ON/OFF, ZERO, UNIT, HOLD Data output: RB 5 No scribing tip FAQ What accuracy can be expected from this caliper? The instrument carries a factory standard of 0.03 mm; combined with the 0.01 mm display resolution this provides dependable repeatability for standard workshop quality control. Is the display able to switch between metric and imperial units? Yes — the caliper’s digital readout supports unit switching; imperial readings show a resolution of 0.0005 in. Does the caliper support data transfer to a PC or measuring system? The device includes an RB 5 data output for digital transfer, enabling straightforward capture of measurements into compatible systems. What is the benefit of the fine-adjustment feature? Fine adjustment permits controlled, slow movement of the jaws, improving contact positioning and reducing measurement scatter when measuring small or delicate features. Is this instrument suitable for routine shop-floor inspections? Yes — the hardened stainless-steel construction and balanced 200 mm reach make it well suited to everyday inspection and workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper 80mm Jaw, M2.5 Thread, Ceramic Insert, Preset, Stainless Steel, With Case - Metav IndustryLine
Reliable measurement in everyday workshop and inspection routines is ensured by the combination of a hardened stainless steel frame, a ceramic measuring insert and an easy preset function for repeatable results; the M2.5 threaded bore for exchangeable heads increases application flexibility. Order directly via Metav Werkzeuge or consult our product specialists for suitability and delivery options. Digital-Uni-MS 200 mm x 80 mm — digital caliper with ceramic insert and preset (Metav IndustryLine) Digital-Uni-MS 200 mm x 80 mm is a compact digital caliper designed for precise internal and external measurements in workshop and quality-control environments Hardened stainless steel construction Ceramic insert for increased wear resistance Digital display with ON/OFF and SET/PRESET controls RB 5 data output for integration and traceability Precision that suits everyday industrial use The instrument addresses the universal workshop requirement for repeatable, verifiable measurements within the Standard range of 0–200 mm, combining practical reach with torsional stiffness. With a display resolution of 0.01 mm and a stated accuracy of ±0.05 mm, the caliper delivers reliable numeric results for machining, assembly and inspection tasks where traceable, comparable values matter. The preset function simplifies repetitive checks by storing a reference position, reducing operator-induced scatter and supporting faster quality-control cycles. The digital readout with dedicated ON/OFF and SET/PRESET keys is designed for clear operation even in busy environments. Robust construction and flexible measuring options Built from hardened stainless steel with a metal housing and fitted with a ceramic insert, the tool resists wear and maintains measuring integrity over long service life; the ceramic contact reduces surface abrasion on delicate or plated parts. Versatility is extended by an integrated M2.5 threaded bore, which accepts exchangeable measuring inserts for special tasks; two 2 mm ball measuring heads are included to support shaft and bore checks out of the box. The 80 mm jaw length provides practical reach on typical components while keeping the instrument easy to handle; net weight of 0.4 kg ensures comfortable one‑hand use with minimal fatigue. Data handling, workflow benefits and traceability Data output via RB 5 permits straightforward transfer of measured values into inspection software or data collectors, improving documentation and reducing transcription errors in quality records. Delivery in a secure transport case protects the caliper during storage and dispatch and supports safe handling between workshop and inspection bench. The combination of robust mechanical design, a wear-resistant contact insert and digital connectivity reduces rework and speeds up inspection loops, delivering measurable efficiency gains across production and service operations. Metav’s distribution and quality filter in Emmerich ensure consistent availability and product reliability. For workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge GmbH in Emmerich to discuss this digital caliper’s suitability and availability: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M240.206.N GTIN: 4054469160009 Brand: Metav IndustryLine Facts Measuring range: 0–200 mm Resolution: 0.01 mm Accuracy: ±0.05 mm Jaw length: 80 mm Weight: 0.4 kg Supply: 3 V Tariff number: 90173000 Special features Material: hardened stainless steel, metal housing Ceramic measuring insert M2.5 threaded bore for exchangeable measuring inserts Includes two 2 mm ball measuring heads Digital display with ON/OFF and SET/PRESET Data output: RB 5 Delivery in transport case (plastic/wooden) Factory standard: Werksnorm FAQ What measuring range and classification does this caliper cover? The caliper covers a measuring range of 0–200 mm and is classified in the Standard category, offering the best balance of reach and stiffness for general machine‑shop and inspection tasks. How precise and repeatable are the readings? Readout resolution is 0.01 mm with a stated accuracy of ±0.05 mm; the preset function supports repeatable checks and reduces variance from manual setting. Can the caliper be used for both internal and external measurements? Yes, the design supports internal and external measurements and includes two 2 mm ball measuring heads for specialised internal or shaft checks. Are there options for specialised measuring contacts? The instrument features an M2.5 threaded bore for exchangeable measuring inserts, enabling tailored contacts to suit particular workpieces and inspection routines. How can measurement data be exported for documentation? Values can be transmitted via the RB 5 data output to compatible data collectors or inspection software for traceable recording. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper 80mm Long Jaw, 0.01mm Resolution, Data Output RB5, Plastic Case - Metav IndustryLine
Take advantage of a dependable combination of precise 0.01 mm resolution, sturdy stainless hardened construction and extended 80 mm jaws for reliable measurements across the workshop. Order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Digital caliper 200 mm (extra-long 80 mm jaws) — Metav IndustryLine Digital caliper 200 mm (extra-long 80 mm jaws) is a robust stainless-steel measuring instrument designed for general machine‑shop and quality‑control tasks, offering fine resolution and versatile measurement modes for everyday use High-resolution 0.01 mm digital readout Extra-long 80 mm measuring jaws Stainless hardened steel construction Four-function measurement capability Reliable precision for daily workshop use The Digital caliper 200 mm (extra-long 80 mm jaws) is built to provide consistent precision for standard workshop tasks. With a resolution of 0.01 mm (and 0.0005 in on the inch scale), readings are detailed enough for machining and inspection where small deviations matter. The 0–200 mm measuring span places this instrument in the standard class, the common choice in metalworking for the best balance between reach and rigidity; it is therefore well suited to general machine‑shop measurement tasks and routine quality checks that demand reproducible results. Robust design that endures workshop environments Construction from stainless hardened steel and a protective metal housing ensures durability against knocks, coolant splash and daily handling. The 80 mm jaws extend reach into deeper or recessed features without compromising stability, while the instrument’s compact mass (approx. 0.66 kg) keeps it easy to manoeuvre for one‑handed work. These design choices reduce flex and operator error, contributing to repeatable readings over many production cycles and minimising downtime for tool replacement. Versatile measurement modes for varied applications The instrument supports four-function measurement for outside, inside, depth and step measurements, simplifying the inspection of complex workpieces without tool changes. The digital display includes ON/OFF, ZERO, UNIT and HOLD functions so that values can be stabilised, zeroed at any position and switched between millimetres and inches quickly. Inch mode reads to 0.0005 in, facilitating cross‑checking of imperial specifications without manual conversion and helping to speed up inspection routines. Data handling and practical operation to aid workflow A dedicated RB 5 data output enables straightforward transfer of measurement data to SPC or data‑collection devices for traceable documentation and process control. The caliper is powered by a 3 V supply and the user interface is optimised for rapid readings and minimal button presses (ON/OFF, ZERO, UNIT, HOLD). These features support efficient, auditable workflows and make the tool a practical asset on the shop floor where timely data capture and process transparency are required. For workshop‑ready precision from Metav IndustryLine, contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M240.012.N GTIN: 4054469160276 Category: Calipers Numbers / Core technical data Measuring range: 0–200 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.66 kg Jaw length: 80/28 mm Power supply: 3 V Materials & special features Stainless hardened steel Metal housing Digital display with ON/OFF, ZERO, UNIT, HOLD Four‑function measurement: outside, inside, depth, step Data output: RB 5 Works standard FAQ What measuring range does the caliper cover? The caliper covers a measuring range of 0–200 mm; the Metav IndustryLine device (SKU M240.012.N) is therefore classified in the standard range for machine‑shop use. How fine is the displayed measurement? Display resolution is 0.01 mm (0.0005 in), providing the fine granularity needed for routine precision checks and general workshop inspection. Which measurement types can be performed with this instrument? The instrument supports outside, inside, depth and step measurements via its four‑function measurement capability, eliminating the need for multiple tools for common measurement tasks. Is the caliper suitable for harsh workshop conditions? Yes. Construction in stainless hardened steel with a metal housing gives the caliper robustness for frequent use in typical workshop environments. How can measurement data be exported for documentation? The caliper offers an RB 5 data output for connection to data‑loggers or SPC systems, enabling direct transfer of readings for traceability and process control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper Absolute ABS, 0.01mm Readout, Tolerance LED, IP54, Four‑Function Measurement, Supplied in Case - Metav IndustryLine
Take advantage of the combination of robust IP54 protection, an ABS absolute measuring system and a fast TOL‑LED tolerance indicator for efficient workshop quality control. Order the digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Digital caliper 200 mm, TOL‑LED, ABS absolute system (M216.222) — Metav IndustryLine A digital caliper 200 mm intended for standard workshop inspection and quality control, offering absolute measurement, a visual tolerance LED and splash protection for regular shopfloor use. Absolute measuring system (ABS) with 3 V power TOL‑LED for fast tolerance checks IP54 splash protection for workshop use Four‑function measuring (inside/outside/depth/step) Precise readings that speed up quality checks The instrument delivers a standard digital caliper experience with a resolution of 0.01 mm, meeting the accuracy requirements stated under DIN 862. The ABS absolute system retains the zero position and permits instant readings after power‑on, eliminating routine referencing. Four measurement modes mean the tool covers inside, outside, depth and step checks without accessory changes, reducing handling time and increasing throughput in inspection routines. Robust construction for everyday workshop demands Constructed from stainless steel, hardened for wear resistance, and fitted with a glass‑guided scale, the caliper resists abrasion while maintaining smooth travel. The IP54 rating shields electronics from workshop dust and splashes, making the instrument suitable for machine shops and maintenance benches. The integrated TOL‑LED provides immediate pass/fail indication, so visual sorting is faster and less error‑prone than manual comparison; the display also offers ORIGIN/MODE/HOLD functions for convenient measurement workflows. Ergonomic operation and straightforward integration Powered by a single 3 V cell and featuring a fast response absolute encoder, the device allows continuous movement without a measurement speed limitation, which suits rapid checking cycles. Inch/metric conversion is available with a secondary resolution of 0.0005 in, supporting mixed‑unit environments. Classified in the Standard class (measuring range up to 300 mm), the instrument balances reach and stiffness—ideal for everyday tasks where a 200 mm span is the workshop baseline. Designed for shopfloor and inspection benches alike This caliper blends durability and usability to support repeatable measurements in production, incoming inspection and tool setting. The compact weight and balanced jaw geometry aid single‑handed operation, while the clear display and tolerance signalling lower cognitive load during series checks. Supplied as a reliable Metav IndustryLine tool, the M216.222 complements a broad metrology toolkit and helps maintain consistent process quality across small and medium‑sized operations. Contact Metav Werkzeuge today for personalised advice or to request the M216.222 from our Emmerich stock for rapid delivery and reliable workshop supply Technical data Article number: M216.222 GTIN: 4054469164229 Category: Messschieber / Caliper Manufacturer: Metav IndustryLine Facts Measuring range: 0–200 mm Resolution: 0.01 mm Resolution (inch): 0.0005 in Weight: 0.4 kg Protection class: IP54 Measuring system: Absolute (ABS) with 3 V Special features Material: stainless steel, hardened; scale with glass guide Display functions: ORIGIN, MODE, TOL, HOLD, INC/ON/OFF Tolerance LED (TOL‑LED) for visual pass/fail checks Four‑function measuring: inside, outside, depth, step No measurement speed limitation (continuous measurement possible) FAQ What is the measuring range and resolution of this caliper? The digital caliper offers a measuring range of 0–200 mm with a resolution of 0.01 mm; inch readings are available at 0.0005 in for mixed‑unit tasks. Does the instrument support inside and depth measurements? Yes, the unit performs four‑function measuring — inside, outside, depth and step — so a single tool covers multiple common inspection requirements. How does the TOL‑LED help during series inspection? The TOL‑LED gives an immediate visual pass/fail signal based on preset tolerances, accelerating sorting and reducing interpretation errors during repetitive checks with the M216.222. Is the caliper suitable for workshop environments? The caliper’s IP54 protection, hardened stainless steel construction and glass‑guided scale make it robust enough for regular shopfloor use while maintaining measurement stability. Which features aid quick measurement workflows? The ABS absolute system keeps the zero reference after switch‑off, the device has no measurement speed limitation, and the display includes ORIGIN, MODE and HOLD functions to streamline inspection sequences. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper Absolute Display 0.02mm Resolution IP54, Four-Point Measurement, Stainless Steel With Glass Slide Kitted - Metav IndustryLine
Take advantage of the combination of workshop-grade robustness, reliable data transfer and fine mechanical precision for consistent measurement results. The 200 mm measuring range, accuracy ±0.02 mm and IP54 protection make this caliper suitable for standard machine‑shop tasks; order the digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Digital Caliper M216.256 — 200 mm absolute caliper with IP54 by Metav IndustryLine The Digital Caliper M216.256 is a 200 mm absolute digital caliper to DIN 862, designed for routine workshop and production measurements where repeatable precision and data output are required. Absolute measuring system with RB 6 data output IP54 protection for dusty and damp environments Four‑function measurement: internal/external/depth/step Stainless steel construction with glass scale Reliable precision for everyday workshop control The caliper delivers accuracy ±0.02 mm with a 0.02 mm reading, a combination that meets typical industrial quality‑control requirements for general mechanical engineering. With a 200 mm measuring range, the instrument falls into the Standard class, offering the best balance between reach and stiffness for routine workpieces such as shafts, housings and fixtures. The specification to DIN 862 provides a trustworthy reference for conformity and comparability in procurement decisions, while the absolute measuring principle avoids the need for repeated reference runs, reducing cycle time during serial checks. Built to withstand workshop conditions and integrate with production data Robustness is a core benefit: an IP54 rating and stainless steel with glass scale construction resist dust and splash exposure common in machining environments, so measurement remains dependable across shifts. The caliper uses an absolute measuring system, which keeps the reference position even after the instrument is powered down, and features data output RB 6 for direct connection to data loggers or statistical process control systems. The digital display includes ON/OFF, 0/ABS, mm/inch and Origin functions for straightforward operation, and a 3 V CR2032 battery powers the unit with a compact supply solution. Versatile handling that speeds up inspection workflows Ergonomic design and manageable mass (approx. 0.5 kg) permit steady one‑handed operation and precise jaw positioning. The device supports four‑function measurement — internal, external, depth and step — allowing a single tool to replace several specialised gauges and thus streamline bench setups. The caliper is operable with or without a drive roller, enhancing adaptability for different measurement techniques. Where traceability and digital logging matter, the integrated output simplifies data capture and reduces transcription errors, supporting lean workflows on the shop floor. Choose the Metav IndustryLine digital caliper M216.256 for robust, workshop-ready measurement and contact Metav Werkzeuge for expert advice or to place an order via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: M216.256 GTIN: 4054469182568 Label: Digital caliper 200 mm, IP54, DIN 862 Manufacturer: Metav IndustryLine Numbers / Core technical data Measuring range: 0–200 mm Reading / resolution: 0.02 mm Accuracy: ±0.02 mm Weight: 0.5 kg Battery: 3 V CR2032 Protection class: IP54 Special features Material: stainless steel with glass scale Measuring system: absolute Digital display: ON/OFF, 0/ABS, mm/inch, Origin Data output: RB 6 Four‑function measurement: internal, external, depth, step Norm: DIN 862 Operable with or without drive roller FAQ What measurement tasks is this caliper best suited for? This caliper is intended for standard workshop and machine‑shop measurements; the Digital Caliper M216.256 (Metav IndustryLine) covers typical tasks on shafts, housings and assembly parts within its 200 mm range. How does the absolute measuring system help in inspection routines? The absolute measuring system maintains the reference position after power‑off, so the M216.256 avoids repeated zeroing and speeds up serial checks while reducing operator steps. Can measurement results be exported to a PC or data logger? Yes. The caliper provides a data output RB 6 interface that allows direct connection for digital logging and integration into SPC or measurement collection systems. Which measurement functions are supported by the instrument? The tool supports four modes: internal, external, depth and step measurement; these functions make the caliper a versatile choice for diverse inspection needs. Is the caliper suitable for use in a production environment with dust and coolant mist? The IP54 rating and durable stainless steel with glass scale make the Digital Caliper M216.256 suitable for dusty and splash‑prone workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision calipers for accurate, repeatable measurement
Calipers are the indispensable length-measuring tools for industry and workshop environments, enabling fast and exact external, internal, depth and step measurements. Our professional range of precision calipers, including vernier calipers, dial calipers and digital calipers, combines mechanical robustness with modern data handling to support consistent quality assurance.
How these calipers work and where they help most
Analogue vernier calipers deliver reliable, autarkic operation via the vernier scale and are best suited to heavy-duty workshop use where durability matters. Digital calipers provide a contrast-rich display, minimise reading errors and speed up inspection routines through functions such as zero setting and data output. At the high end, touchscreen calipers from Microtech feature an integrated microcomputer, colour touch display, built-in error-tolerance checks and wireless data transmission, making them suited for Industry 4.0 workflows. Workshop calipers with extended measuring ranges offer optional fine adjustment and rounded tips for interior measurements, while in-built calipers can be mounted directly to machines or test rigs to monitor travel. Specialty calipers cover tasks such as deep grooves, pipe wall thickness, brake disc inspection, three-point measurements and bespoke geometries.
Tangible benefits that improve production performance
- Faster throughput: digital calipers with data output reduce manual entry and accelerate quality checks.
- Higher repeatability: robust mechanical design and error-tolerance controls raise measurement consistency.
- Flexible integration: wireless data transmission and touchscreen operation simplify digitisation to existing systems.
- Reduced downtime: workshop and in-built variants with fine adjustment minimise rework and set-up time.
- Application coverage: specialty calipers adapt to complex geometries, from three-point checks to deep-niche measurements.
Microtech and metav — quality and supply you can rely on
For high-end, touchscreen-equipped instruments, Microtech represents the technological benchmark thanks to its integrated controls and wireless capabilities. As a precision partner, Metav complements this with decades of experience and a comprehensive offering: more than 250,000 products, a European quality filter in Emmerich and the trust of over 48,000 customers, making Metav a sensible central source for calipers and measuring equipment.
Quick summary
Calipers — from analogue vernier to touchscreen digital — deliver the measurement accuracy and data connectivity modern production demands while reducing inspection time and improving repeatability.
FAQ
What are the main differences between analogue and digital calipers?
Analogue vernier calipers rely on a vernier scale and are prized for ruggedness and independence from power, whereas digital calipers provide a contrast display, zero setting and data output to eliminate readout errors and speed up quality processes.
Can calipers be integrated into a digital inspection workflow?
Yes. Many digital calipers and touchscreen models support data output and wireless data transmission, enabling direct transfer of measurements into quality-management systems or statistical process control.
Which caliper type is best for large measuring ranges in a workshop?
Workshop calipers with extended measuring ranges and optional fine adjustment are designed for large components; they maintain mechanical stability and are available with rounded interior jaws for safer internal measurements.
Are there calipers for specialised geometries like deep grooves or brake discs?
Specialty calipers are explicitly engineered for such tasks. They feature tailored measuring faces for deep-niche measurements, pipe wall thicknesses, brake-disc checks and three-point or flexible geometries.
How do touchscreen calipers from Microtech improve quality control?
Microtech touchscreen calipers combine an integrated microcomputer, colour touch display and built-in error-tolerance checks with wireless data transmission, allowing immediate verification, reduced human error and seamless digitisation in line with Industry 4.0 practices.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com