Precision calipers for reliable industrial measurement
Precision calipers and their variants provide fast, repeatable outside, inside, depth and step measurements to ensure component conformity and process control on the shopfloor, combining mechanical robustness with digital data handling for traceable results. Designed for use in industrial quality assurance and manufacturing, these calipers serve applications from rough workshop environments to precision inspection, with options such as analogue vernier calipers for durable, battery‑free operation and digital calipers offering clear displays and data output to speed up quality workflows. Specialist formats, including workshop calipers with extended ranges and built‑in mounting calipers for machine or fixture monitoring, extend capability to long strokes and embedded measurement tasks, while bespoke models handle deep grooves, pipe wall thicknesses and three‑point or other complex geometries. The range emphasises highest accuracy and process integration, featuring high‑end touchscreen models with integrated microcomputers, wireless data transfer and Industry 4.0 compatibility to modernise measurement and quality data capture.
200mm Precision Pocket Caliper 0.05mm Nonius, Moment Lock, Monoblock, Depth Rod, Supplied in Case - Metav IndustryLine
Take advantage of a compact yet robust measuring solution with a 200 mm stainless steel pocket caliper that delivers 0.05 mm vernier precision and repeatable readings thanks to a moment lock; order directly via Metav Werkzeuge or contact the consultants for technical advice. Pocket Caliper M201.042 by Metav IndustryLine — 200 mm, 0.05 mm vernier with moment lock The Pocket Caliper M201.042 is a compact, DIN 862‑compliant caliper designed for workshop and field measurement, offering a balance of reach and rigidity for standard mechanical and maintenance tasks. Compact 200 mm workshop caliper Vernier resolution 0.05 mm and inch scale Moment lock for repeatable readings Depth gauge and four-way measurement Accurate readings for routine and precise checks The compact design combines a 200 mm measuring range with a vernier resolution of 0.05 mm, offering the proven accuracy expected under DIN 862. The mechanical vernier and an inch indicator provide direct, traceable readings without reliance on batteries or electronics, which reduces downtime in field and workshop environments. This analogue measurement principle supports fast, consistent checks of external dimensions, internal bores, step heights and depths, ensuring that routine quality controls run smoothly and predictably. Robust design for everyday workshop use Constructed from stainless steel with a monoblock frame and matt chrome finish, the instrument resists corrosion and maintains stability during regular handling. The compact format classifies it as a standard workshop caliper — the common balance between reach and stiffness — making it suitable for general engineering, maintenance and fabrication tasks. The compact jaws and protected profile permit reliable use in confined spaces while preserving measurement integrity over repeated cycles. Practical handling and repeatable measurement workflow A moment lock secures the sliding jaw at the set position, enabling reproducible results when transferring measurements or checking several identical parts. The tool incorporates a depth gauge and, thanks to four‑way measurement capability, supports internal, external, step and depth measurements without additional accessories. A thread reference chart is printed on the reverse side to support quick workpiece identification and expedite inspection routines. Ready for use and transport The caliper is supplied with a protective case for secure transport and storage and includes practical on‑tool aids for daily workflow. Its analogue construction requires no batteries and is immediately usable on the shop floor, while the durable finish and monoblock construction reduce the risk of wear‑related drift. For operations that value straightforward reliability and minimal maintenance, this instrument provides a dependable measuring companion. For dependable workshop measurement, select the Metav IndustryLine Pocket Caliper M201.042 — contact Metav Werkzeuge GmbH in Emmerich for expert advice and delivery arrangements at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M201.042 GTIN: 4054469100296 Norm: DIN 862 Customs tariff number: 90173000 Facts Measuring range: 0–200 mm Resolution: 0.05 mm Vernier inch scale: 1/128" top (inch indication) Measurement types: external, internal, step, depth Special features Material: stainless steel Finish: matt chrome plated Monoblock construction Moment lock for repeatable readings Depth gauge integrated Thread chart on reverse side Analogue pocket caliper design Delivered in a protective case Pocket caliper intended for standard workshop use Jaw tip lengths: 50/17 FAQ How precise is the caliper for workshop checks? The caliper achieves a vernier resolution of 0.05 mm, suitable for standard workshop measurements in accordance with DIN 862; it provides reliable repeatability for everyday quality control. Can the tool measure depths and internal bores? Yes, the instrument features an integrated depth gauge and supports four‑way measurement (external, internal, step and depth), enabling versatile inspection tasks without additional tools. Is the caliper suitable for field and shop use? The stainless steel, matt chrome finish and monoblock design provide robustness for both workshop and field environments; the protective case aids secure transport. Does the caliper include any reference aids? A thread reference chart is printed on the reverse side to assist with quick identification of common thread sizes during inspection work. Is battery power required? No — this is an analogue vernier caliper that operates without batteries, ensuring immediate usability and low maintenance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Precision Pocket Caliper 0.05mm Resolution, Monoblock Stainless Steel, Moment Lock, DIN 862, Depth Rod, in Case - Metav IndustryLine
Benefit from a compact, workshop-ready caliper that combines stainless-steel durability, a 200 mm measuring range and a repeatable moment lock for consistent contact pressure; order directly via Metav Werkzeuge or consult the technical team for specification support. Pocket Caliper TOP (M201.076) — Metav IndustryLine, 200 mm / 0.05 mm, moment lock The Pocket Caliper TOP (M201.076) is a compact, DIN 862-compliant analogue caliper intended for standard machine‑shop and metalworking measurements up to 200 mm. Compact pocket caliper 200 mm range Analogue vernier with 0.05 mm resolution Moment lock for repeatable pressure control Matt chrome stainless monoblock construction Reliable workshop precision for everyday measurements The TOP pocket caliper delivers consistent results where repeatability matters. Built to DIN 862, the tool combines a 0–200 mm measuring range with an analogue vernier that provides 0.05 mm resolution, making it well suited to the typical demands of machine shops and maintenance workshops. The hardened monoblock frame resists bending and retains alignment during regular use, which reduces re‑checks and increases throughput on routine inspection tasks. This focus on measurable performance supports faster decision-making in production and quality control. Secure handling and durable construction for frequent use Ergonomics and longevity are prioritised in the design: the caliper features a moment lock that fixes the slider at a defined clamping torque, preventing variation from differing hand pressure and ensuring repeatable contact force across measurements. The body is manufactured from stainless steel with a matt chrome finish and fully hardened for wear resistance, while the compact format and low weight (approx. 0.24 kg) allow single-handed use and easy transport. These characteristics reduce handling fatigue and contribute to fewer measurement errors during long shifts. Versatile measurement modes for workshop tasks This analogue caliper supports four measuring functions — outside, inside, depth and step measurements — which condense multiple inspection routines into a single instrument and save tool-up time. The integrated depth probe and the jaw geometry (jaw length 50 / 17 mm) cover typical component checks without changing tools. Dual vernier scales provide metric and imperial referencing where required, and the presence of a thread reference table on the reverse side simplifies certain fastener checks. The sum is a compact instrument that increases operational flexibility while keeping the workflow lean. Practical benefits and quality assurance The combination of a hardened monoblock construction, clear vernier reading and the moment locking mechanism reduces measurement scatter and the need for repeated checks, delivering measurable time savings. The caliper is a standard-class instrument for shops that require dependable, repeatable measurements without the additional complexity of digital data transfer. A transport case is included for safe storage and shipment, keeping the instrument protected between uses. For dependable, workshop-grade precision from the TOP series, contact Metav Werkzeuge for tailored advice and immediate supply from Emmerich. Technical data Article number: M201.076 GTIN: 4054469100487 Norm: DIN 862 ECLASS: 21170344 Facts Measuring range: 0–200 mm Resolution: 0.05 mm Weight: 0.24 kg Jaw length: 50 / 17 mm Four measuring functions: outside, inside, depth, step Depth gauge: yes Special features Material: stainless steel, matt chrome plated, fully hardened Moment lock for repeatable clamping force Monoblock construction Analogue dual vernier scales (metric and imperial) Thread table on reverse side Delivery in transport case Labelled as TOP series FAQ Is the caliper suitable for everyday workshop use? The Pocket Caliper TOP (M201.076) is designed for standard workshop and metalworking measurements, offering a 0–200 mm range and robust construction for frequent use. What measuring functions are available with this caliper? The instrument provides four measuring functions — outside, inside, depth and step — enabling a wide range of routine inspection tasks with the Pocket Caliper TOP (M201.076). How repeatable are measurements with this model? Repeatability is enhanced by the built‑in moment lock and the hardened monoblock frame, which together reduce variation from differing hand pressure when using the Pocket Caliper TOP (M201.076). Is the caliper delivered with a case and any printed references? Yes, the caliper is supplied with a transport case and includes a thread reference table on the reverse side, as stated in the product details for the Pocket Caliper TOP (M201.076). Does this analogue caliper include digital data output? The Pocket Caliper TOP (M201.076) is an analogue instrument with dual vernier scales; no digital data output is specified for this model. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Watch-Type Caliper 0.01mm Resolution, Four-Function Measurement, DIN 862, Supplied in Case - Metav IndustryLine
Benefit from 0.01 mm reading accuracy and versatile fourfold measurement within the compact 0–200 mm range; the analogue dial with a 38 mm face and locking screw supports repeatable, workshop-ready readings. Order the Dial Caliper directly via Metav Werkzeuge or consult our specialists if further advice is required. Dial Caliper TOP 200 x 0.01 mm — Analogue dial gauge with 0–200 mm range The Dial Caliper TOP 200 x 0.01 mm is an analogue measuring instrument designed for standard workshop and metalworking tasks, offering precise outside, inside, depth and step measurements across a versatile 0–200 mm span. Analogue dial, 0.01 mm resolution Four measurement functions Compliant with DIN 862 Locking screw and thread table Precision for routine workshop control and fine mechanics This instrument is tailored to the Standard measuring class (0–200 mm), which balances reach and rigidity for everyday machining and quality control. The 0.01 mm dial resolution provides a clear, incremental scale that speeds up inspection cycles while keeping measurement uncertainty low for typical production tasks. Compliance with DIN 862 supplies an established reference for expected accuracy and construction, making the gauge a dependable choice for mechanical workshops and small-series production where consistent repeatability matters. Robust handling that reduces rework and measurement variability The dial face of 38 mm diameter improves legibility compared with smaller dials, and the integrated locking screw secures the slide for transfer measurements and repeat checks. The instrument incorporates a thread table on the reverse for rapid reference during screw and thread work. Together these features convert the mechanical movement into practical advantages: fewer read-back errors, faster repeat measurements, and reliable clamping for comparative checks on the shop floor. Versatile fourfold measurement and straightforward interpretation Equipped for fourfold measurement — outside, inside, depth and step — this analogue gauge covers the common tasks that a workshop or toolroom requires, reducing the need for multiple specialised tools. The mechanical dial provides intuitive feedback and immediate visual confirmation of small deviations, which is particularly useful during setup or when scanning for wear. The combination of mechanical simplicity and a precise scale supports long-term serviceability and ease of use in environments where digital options are not required or desired. Contact Metav Werkzeuge for a tailored supply recommendation for the Metav IndustryLine Dial Caliper TOP 200 x 0.01 mm and to arrange procurement through our Emmerich site Technical data Article number: M202.144 GTIN: 4054469102382 ECLASS: 21170344 Category: Messschieber Facts Measuring range: 0–200 mm Resolution: 0.01 mm Dial diameter: 38 mm Norm: DIN 862 Analog reading Special features Four measurement functions (outside, inside, depth, step) Locking screw Thread table on reverse Feststellschraube present Gewindetabelle on back FAQ What is the measuring range of this caliper? This Dial Caliper TOP 200 x 0.01 mm offers a measuring range of 0–200 mm (SKU M202.144) suitable for standard workshop tasks. What resolution and readability does the instrument provide? The instrument provides a resolution of 0.01 mm via an analogue dial with a 38 mm face for clear visual readout. Which measurement types can be performed with this gauge? The gauge supports fourfold measurement: outside, inside, depth and step measurements, enabling versatile inspection routines. Does this caliper meet any industry standards? Yes; the caliper is manufactured in accordance with DIN 862, ensuring recognised construction and performance criteria for mechanical calipers. Is this instrument intended for workshop or precision-laboratory work? Classified in the Standard range (0–200 mm), the caliper suits general machine‑shop, toolroom and quality-control applications where a balance of reach and rigidity is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Werkstatt-Messschieber, 0,05mm, Werksnorm - Metav IndustryLine
Der von Ludwig Josef Bayer 1989 gegründete Traditionsvertrieb von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für Premium-Messwerkzeuge zu einem kleinem Preis. HIGHLIGHTS Messbereich: bis 200mm Ablesung: 0,05mm Material: rostfreier Stahl, Skala und Nonius mattverchromt leichte Ausführung Im Fluss messen Der Messbereich von 0 bis 200mm bringt die nötige Reichweite für typische Bauteile auf den Punkt. Prüfungen gelingen direkt am Werkstück, auch wenn Formen variieren. Im allgemeinen Maschinen- und Metallbau sorgt dieser Bereich für eine sichere Orientierung über den gesamten Prozess. Die Ergebnisse bleiben nachvollziehbar und konsistent. Das reduziert Nacharbeit und unterstützt saubere Übergaben zwischen Arbeitsschritten. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber.. Ausführung Werksnorm Verlassen Sie sich auf Präzision, die weltweit Standards setzt: Unser Metav IndustryLine Werkstatt-Messschieber erfüllt die Anforderungen der Werksnorm in jedem Detail – von der Materialauswahl über die Fertigung bis hin zur Kalibrierung. Damit garantieren wir exakte Messergebnisse, internationale Zertifikate und höchste Akzeptanz bei Audits und Kundenabnahmen. Qualität, der Sie vertrauen können. Ausführungsdetails für Werkstatt-Messschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber leichte Ausführung Bestellnummer: M201.373 Zahlen zum Werkzeug: Messbereich: 0-200mm Gewicht: 0,8kg Norm: Werksnorm Schnabellänge: 60/36mm Ablesung: 0,05mm Ablesung in Inch/Zoll: 1/128 Ausführungen Ausführung: analog Material: rostfreier Stahl, Skala und Nonius mattverchromt leichte Ausführung Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Worauf es beim Messschieberkauf ankommt: Zusatzfunktionen wie Datenausgangsoptionen oder die Regelung der Messkraft sind neben der Genauigkeit und dem Messbereich essenziell. Der Gebrauch eines Messschiebers mit präzise abgestimmter Messkraft erweist sich insbesondere im Bereich der Qualitätssicherung und innerhalb von Laboren als vorteilhaft. Ferner darf man nicht vergessen zu prüfen, ob der Messschieber schon kalibriert sein muss. Die Möglichkeit zur Kalibrierung besteht unmittelbar bei Entgegennahme; zur Sicherstellung der Prozessstabilität sollte regelmäßig jährlich neu kalibriert werden.
200mm Werkstatt-Messschieber, 0,05mm, Werksnorm - Metav IndustryLine
Das 1989 gegründete Traditionsunternehmen für den Vertrieb von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für hevorragende Messwerkzeuge zu einem überzeugenden Preis. Im Fluss messen: 0 bis 200mm 200mm schaffen genau die Reichweite, die im Alltag am häufigsten gebraucht wird. Von der Vormontage bis zur Endprüfung bleibt der Zugriff auf relevante Maße erhalten. Der Bereich passt zu den Anforderungen im Maschinen- und Metallbau und sorgt für gleichmäßige Qualität. Messfolgen bleiben übersichtlich und planbar. Das reduziert Stillstände und hält Projekte auf Kurs. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber.. Werksnorm Unser Werkstatt-Messschieber wird vollständig nach den einschlägigen DIN-Normen gefertigt – sämtliche Materialien, Fertigungs- und Kalibrierverfahren entsprechen den Anforderungen der Werksnorm. Damit sind Maßhaltigkeit und Wiederholgenauigkeit garantiert, Prüfzertifikate sind international kompatibel, und Audits oder Kundenfreigaben lassen sich deutlich schneller durchlaufen. Die DIN-Konformität sichert konstante Qualität, erleichtert die weltweite Einsetzbarkeit und stärkt das Vertrauen in jedes einzelne Messergebnis. Profi-Empfehlung: Führe Messungen immer unter gleichen Bedingung aus. Im Idealfall im einem Messlabor, das 20° Celsius vorhält. Sie sind unsicher, ob das Werkzeug zu Ihrer Anwendung passt?? Oder es fehlen Ihnen noch technische Daten?? Kein Problem, sprechen Sie uns an!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Telefon: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Eigenschaften für Werkstatt-Messschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber leichte Ausführung Bestellnummer: M201.370 Fakten: Messbereich: 0-200mm Gewicht: 0,7kg Norm: Werksnorm Schnabellänge: 60mm Ablesung: 0,05mm Ablesung in Inch/Zoll: 1/128 Besonderheiten Ausführung: analog Material: rostfreier Stahl, Skala und Nonius mattverchromt leichte Ausführung Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Zu beachtende Faktoren beim Erwerb eines Messschiebers: Zugleich mit der Präzision und dem Messbereich sind die Berücksichtigung von Features wie Datenexport und Messkraftkontrolle unerlässlich. Der Gebrauch eines Messschiebers mit präzise abgestimmter Messkraft erweist sich insbesondere im Bereich der Qualitätssicherung und innerhalb von Laboren als vorteilhaft. Ferner darf man nicht vergessen zu prüfen, ob der Messschieber schon kalibriert sein muss. Bereits bei der Zustellung ist eine Kalibrierung möglich, und für die Garantie der Prozesssicherheit sollte diese jährlich wiederholt werden. Pflegehinweis - damit Sie lange etwas von Ihrem Werkstatt-Messschieber haben: Werkstatt-Messschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
200mm Workshop Caliper With Pointed Jaws 0.05mm Resolution Fine Adjustment Monoblock, Hardened Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of the combination of 200 mm measurement range, hardened stainless-steel construction and a smooth fine-adjustment screw for reliable, repeatable workshop measurements; order the caliper directly via Metav Werkzeuge or ask our consultants for tailored technical advice. M201.330 Workshop Caliper — 200 mm, hardened stainless steel, fine-adjustment (Metav IndustryLine) A M201.330 workshop caliper designed for standard workshop tasks up to 200 mm, offering vernier precision for external, internal and step measurements. 200 mm measurement range, workshop standard Hardened stainless steel with matt-chrome scale Fine-adjustment screw for precise positioning Monoblock design for enhanced rigidity Precision that suits everyday workshop control The 200 mm measurement span places this instrument firmly in the standard class of calipers, balancing reach and stiffness for general mechanical and metalworking tasks. The analogue vernier provides a practical reading resolution of 0.05 mm, which corresponds to the established industrial expectation for mechanical calipers and supports reliable dimensional checks on components, fixtures and assemblies. Where quick verification and straightforward repeatability matter, the scaled vernier and clear graduation reduce interpretation errors and keep inspection loops efficient. Built for durability and readability in production environments A hardened stainless-steel body with a matt-chrome scale resists wear and reduces glare, improving legibility under harsh workshop lighting. The monoblock construction increases structural stiffness so that measurements remain consistent during everyday handling and moderate knocks. Pointed measuring tips extend the tool’s usefulness for fine contact points and narrow grooves, while the overall build supports long-term durability and lower maintenance compared with plated or softer materials. Smooth handling increases measurement confidence The integrated fine-adjustment screw allows controlled closure of the jaws and precise positioning on the workpiece, preventing overrun and unwanted pressure that can distort readings. Dual vernier readings (imperial on the upper scale, metric on the lower) combine flexibility with clarity: the instrument carries a 1/128" indication on the upper vernier and 1/20 mm on the lower, making conversion-free checks possible when imperial and metric references are mixed. Conformity with DIN 862 for jaw length up to 200 mm ensures production compatibility and adherence to familiar workshop standards. Contact Metav Werkzeuge for specialised advice on the M201.330 workshop caliper — our Emmerich-based precision experts will help match the instrument to application requirements or provide supplementary technical documentation Technical Data Article number: M201.330 GTIN: 4054469101637 EClass: 21170344 Tariff number: 90173000 Brand: Metav IndustryLine Facts Measurement range: 0–200 mm Jaw length: 60 mm Resolution: 0.05 mm Vernier: 1/128" (upper) / 1/20 mm (lower) Special features Hardened stainless steel with matt-chrome scale Monoblock construction Fine-adjustment screw Pointed measuring tips Complies with DIN 862 for jaw length up to 200 mm Analogue mechanical vernier FAQ How precise is the M201.330 for routine workshop measurements? The M201.330 provides a vernier resolution of 0.05 mm and is built to deliver consistent repeatability for standard workshop control tasks up to 200 mm. Which measurement types can this caliper perform? It supports external, internal and step measurements, with specialised pointed tips for accessing narrow features. Is the scale readable in bright workshop lighting? Yes, the matt-chrome scale minimises reflection and, together with the hardened stainless-steel body, keeps graduations legible over extended use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Workshop Caliper Without Tip 60mm Jaw 0.05mm Vernier Stainless Steel, DIN 862 - Metav IndustryLine
Benefit from the combination of stainless‑steel durability, precise 0.05 mm vernier reading and a compact 200 mm measuring range for smooth workshop control; order the caliper directly via Metav Werkzeuge or consult our advisors for specification support. Workshop Vernier Caliper M201.390 – 200 mm, 0.05 mm vernier (Metav IndustryLine) The Workshop Vernier Caliper M201.390 is a robust analogue caliper for everyday machine‑shop measurements up to 200 mm, designed for fast, repeatable checks in production and maintenance environments. Analogue vernier with 0.05 mm resolution Stainless steel body, matt chrome scale and vernier 200 mm measuring range for workshop applications 60 mm long jaws for stable external clamping Reliable workshop accuracy for everyday measurement The M201.390 delivers workshop‑grade precision with a vernier resolution of 0.05 mm (also readable as 1/128 inch), which aligns with common industrial practice for mechanical calipers. As a standard‑range instrument it covers the typical needs of machine shops and metalworking tasks without compromising stiffness or handling. Compliance with DIN 862 ensures that readings are comparable to established metrology expectations, so measurements taken for setup, in‑process checks or maintenance feed directly into quality control workflows with minimal interpretation required. Robust construction for daily workshop use A body of stainless steel with a matt‑chrome scale and vernier provides corrosion resistance and clear contrast for long service life. The 60 mm jaw length increases contact area for stable external measurements, reducing tilt and local deformation on softer workpieces. At approximately 0.7 kg, the caliper balances feel and solidity, making one‑handed operation comfortable while maintaining the stiffness needed for reproducible results. These construction choices lower the need for frequent replacement and support reliable production throughput. Simple vernier operation speeds routine checks Being an analogue, non‑electronic tool, the caliper avoids dependency on batteries or electronics and is immediately available for rapid checks. The vernier scale principle converts fine graduations into a readable fractional scale—readable to 0.05 mm—so routine dimensional checks can be executed quickly without menu navigation. This directness translates into time savings for repetitive inspection tasks and a lower lifecycle cost compared with battery‑powered alternatives, while still offering the precision expected in everyday quality control. Practical benefits for workshop workflows Integrating this caliper into workshop routines improves first‑article checks, quick go/no‑go examinations and fitting tasks through its combination of reach and robustness. The 200 mm measuring range is the workshop standard that balances reach with rigidity, making it suitable for components, housings and assemblies commonly encountered in mechanical engineering and maintenance. The straightforward design facilitates operator training and consistent measurement technique, which supports traceable processes and reduces scrap from incorrect fits. Contact Metav Werkzeuge for personalised advice on the Metav IndustryLine 200 mm vernier caliper and secure dependable delivery from Emmerich Technical Data SKU: M201.390 GTIN: 4054469102085 Label: Werkstatt-Messschieber ohne Spitze 200x60x0,05mm rostfrei Facts Measuring range: 0–200 mm Resolution: 0.05 mm (1/128 inch) Weight: 0.7 kg Jaw length: 60 mm Tariff number: 90173000 Special features Material: stainless steel; scale and vernier matt chrome plated Type: Analogue vernier caliper Standard: DIN 862 Design: without tip (no spike) Brand: Metav IndustryLine FAQ How precise is the caliper for general workshop use? The M201.390 provides a vernier resolution of 0.05 mm, which corresponds to the industrial standard for analogue calipers and is suitable for most machine‑shop and workshop measurements. Can this caliper be used for internal and external measurements? Yes, the analogue vernier caliper design supports internal and external measurements as well as depth checks within its 0–200 mm range. Is a calibration certificate supplied with the tool? This workshop caliper is not listed as delivered with an ISO 17025 certificate; standard factory specification applies unless an explicitly calibrated variant is requested. What makes the construction suitable for workshop environments? The stainless‑steel construction with matt‑chrome scale and vernier offers corrosion resistance and visual contrast, while the 60 mm jaws and overall stiffness ensure reproducible contact during daily use. How does the analogue vernier compare to a digital caliper in a production setting? Analogue vernier calipers like the M201.390 require no batteries, offer immediate readability for trained staff and provide a durable option for routine checks; digital calipers can offer finer resolution and data output but add complexity and maintenance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Workshop Precision Caliper With Pointed Jaws 0.05mm Resolution, DIN 862 - Metav IndustryLine
Take advantage of a workshop instrument that combines robust stainless steel construction, a practical 200 mm measuring range and a reliable 0.05 mm vernier resolution for consistent routine control. The caliper’s matt‑chrome scale and DIN 862 compliance support reproducible readings and reduced rework. Order the M201.393 directly via Metav Werkzeuge or consult our specialists for application advice. M201.393 Workshop Vernier Caliper — 200 mm, 0.05 mm resolution (Metav IndustryLine) M201.393 is a purpose-built workshop caliper for everyday mechanical measuring tasks, offering analogue vernier precision and durable stainless‑steel construction. Robust stainless steel construction 200 mm measuring range 0.05 mm vernier resolution Conforms to DIN 862 Reliable measurement for everyday workshop tasks The M201.393 is engineered as a practical workshop caliper that balances reach and stiffness with a 200 mm measuring range appropriate for typical machine‑shop and metalworking tasks. The analogue vernier system provides a clear 0.05 mm graduation, which aligns with industrial expectations for mechanical calipers and supports rapid, repeatable checks during production. Because the scale and vernier are matt chrome plated, reflections are minimised and legibility is improved in workshop lighting, reducing reading errors and speeding up inspection routines. Durable design that tolerates rough handling Constructed from stainless steel, the slide and jaws resist corrosion and stand up to the knocks of daily use. The asymmetric jaw lengths (60/40) combine firm external‑measuring faces with compact internal jaws for confined spaces; the 60/40 jaws improve access to shoulders and grooves without sacrificing stability. The instrument’s mass contributes to steady handling — lightweight enough for single‑handed work yet substantial enough to dampen vibration during measuring. This robust build translates into lower replacement frequency and fewer production interruptions. Precision aligned with recognised standards Compliance with DIN 862 characterises the M201.393 as suitable for workshop quality control rather than laboratory certification. The 0.05 mm vernier resolution corresponds to standard mechanical accuracy classes and is adequate for routine dimensional checks on machined parts, fixtures and assemblies. The analogue format keeps the measuring principle simple and serviceable: wear can be assessed visually and adjustment made in situ, which preserves long‑term reliability in a busy production environment. Clear, practical features for faster workflows The matt‑chrome scale and the clearly graduated vernier reduce interpretation time and support faster decisions on the shop floor. The balanced jaw geometry and robust slide enable steady contact pressure for consistent readings; this is important where repeatability matters more than submicron resolution. The caliper’s workshop focus makes it a straightforward choice when a dependable, easy‑to‑maintain measuring tool is required for daily inspection and fitting tasks. Secure reliable measurements with Metav IndustryLine’s stainless‑steel M201.393 — contact Metav Werkzeuge in Emmerich for tailored advice and prompt supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: M201.393 GTIN: 4054469102122 Label: Werkstatt-Messschieber mit Spitze 200x60x0,05mm rostfrei Manufacturer: Metav IndustryLine Facts Measuring range: 0–200 mm Resolution: 0.05 mm Inch resolution: 1/128 in Weight: 0.8 kg Jaw length: 60/40 mm Special features Material: stainless steel Scale and vernier: matt chrome‑plated Analogue vernier caliper Conforms to DIN 862 FAQ What measuring range does this caliper cover? The M201.393 covers a measuring range of 0–200 mm, making it suitable for standard workshop tasks and routine dimensional checks. What is the smallest graduation and typical accuracy of this analogue caliper? The vernier provides a 0.05 mm graduation; this class of mechanical caliper is intended for workshop accuracy consistent with DIN 862. Is the instrument suitable for corrosive environments? The M201.393 is made from stainless steel, which increases resistance to corrosion compared with plain carbon steel and is appropriate for typical workshop atmospheres. Can the caliper measure internal and external diameters? Yes, the design of the jaws allows both external and internal measurements; the 60/40 jaw geometry also facilitates measurements in confined spaces. Does this caliper include a certification or calibration report? This listing does not indicate an ISO 17025 calibration certificate; the M201.393 is supplied as a workshop instrument conforming to DIN 862. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2020mm Digital Precision Caliper For Bore Centre Distances With Ø20/Ø35 Cones, IP67, ISO 17025 Calibrated - Microtech Metrology
The combination of an extra‑long 20–2020 mm measuring range, robust IP67 protection and ISO 17025 calibration certificate makes this instrument a reliable choice for large‑format measurement tasks; order directly via Metav Werkzeuge or consult our specialists for specification matching. Microtech Metrology digital caliper — 20–2020 mm, IP67 protection The digital caliper from Microtech Metrology is a long‑range measuring instrument designed for large components and workshop environments, combining wide reach with shop‑floor durability and traceable calibration ISO 17025 calibrated with certificate included Measurement range 20–2020 mm for large parts IP67 dust and water protection for harsh environments Swiss Digit display, 11 mm digit height for high legibility Traceable accuracy for large components Designed for applications where repeatable, documented measurements matter, this instrument is delivered fully ISO 17025 calibrated with a calibration certificate, providing traceability for quality control and auditing. The device reads in steps of 0.01 mm while the specified accuracy is ±0.06 mm, so it is especially suited to workshop and production inspection tasks where long travel and documented conformity are priorities rather than sub‑micron laboratory measurement. The 20–2020 mm span places the caliper in the extra‑long category, allowing measurements of housings, fixtures and large assemblies without transfer errors from multiple shorter instruments. Built for the workshop — robust, visible, reliable A tough design with IP67 ingress protection keeps the electronics and sliding system operational in coolant, chips and dusty conditions, reducing downtime for routine cleaning. The Swiss Digit display with an 11 mm digit height ensures quick, unambiguous readouts on the shop floor, which speeds up inspection cycles and reduces transcription errors. The digital electronics and clear numerals support rapid decision‑making, improving throughput in measuring stations and incoming inspection while maintaining documented measurement integrity. Practical handling and accessories that save time The instrument comes supplied with two measuring cones (Ø20 mm and Ø35 mm) to simplify bore and depth checks on large diameters, eliminating the need for improvised adapters. The long hardened beam maintains sufficient stiffness across its travel to keep deflection low; combined with the device’s calibration, this reduces measurement uncertainty for long‑span checks. Metav’s distribution and quality filter in Emmerich ensure consistent availability and a verified quality level, reflecting a commitment to making precision tools accessible across industry and trade. For ISO 17025‑traceable measurements with the Microtech Metrology digital caliper, contact Metav Werkzeuge in Emmerich for delivery options and specification advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 141732013 GTIN: 4061905452574 Manufacturer: Microtech Metrology Core technical data Measurement range: 20–2020 mm Maximum measuring length: 2020 mm Resolution: 0.01 mm Stated accuracy: ±0.06 mm Display: Swiss Digit, 11 mm digit height Protection class: IP67 Special features Delivered calibrated to ISO 17025 with certificate Digital operation for rapid readout and recording Includes measuring cones Ø20 mm and Ø35 mm Long‑range design suitable for large components and assemblies FAQ What measurement range does the caliper cover? The Microtech Metrology digital caliper covers a measuring range of 20–2020 mm, enabling direct inspection of large parts without the need to piece measurements together. Is the instrument delivered calibrated? Yes. The digital caliper from Microtech Metrology is supplied fully calibrated to ISO 17025 and includes the calibration certificate with delivery. What resolution and accuracy can be expected? The instrument provides a resolution of 0.01 mm with a stated accuracy of ±0.06 mm, suitable for production and workshop inspection of large components. Which environments is the caliper suited for? With IP67 protection, the caliper is appropriate for shop‑floor conditions involving coolant splashes, chips or dust, while the robust beam supports repeatable long‑span measurements. What accessories are included for specific measurements? The delivery includes measuring cones Ø20 mm and Ø35 mm, allowing simplified bore and depth checks on larger diameters without separate adapters. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
20mm Interior Measuring Insert Flat Measuring Face 6.5×1mm L30 For Digital Uni Caliper Series 240.201–240.205 - Metav IndustryLine
Take advantage of a precise, durable measuring accessory that extends the capability of existing digital calipers for groove and internal profile inspection. The stainless steel construction and flat measuring face (6.5 × 1 mm, L = 30 mm) provide reproducible contact geometry and long service life. Order the insert directly via Metav Werkzeuge or consult the team for application advice. M240.214 Inside Measuring Insert for Digital‑Uni Calipers – Flat 6.5 × 1 mm, L 30 mm A M240.214 inside measuring insert designed to equip Digital‑Uni calipers for accurate groove and internal profile measurement from 20 mm upwards Flat measuring face 6.5 x 1 mm Compatible with Digital‑Uni series 240.201–240.205 Stainless steel construction for longevity Intended for internal measurements from 20 mm Precise contact geometry optimised for groove measurement The insert features a flat measuring face of 6.5 × 1 mm and an effective contact length of 30 mm, a combination that narrows the contact area to a stable, repeatable surface for groove and slot inspection. This geometry reduces measurement scatter on narrow features and converts the basic caliper into a specialised internal probe for profile checks. The result is improved reproducibility when comparing production parts against drawings or gauges, enabling faster go/no‑go decisions on the shop floor. Robust stainless construction for reliable duty Manufactured from stainless steel, the insert resists corrosion and maintains dimensional stability in typical workshop atmospheres. The material choice supports regular use and cleaning without surface degradation, which preserves the calibrated contact geometry over time. Because the part is small and mechanically simple, wear is limited to contact areas; periodic inspection suffices to confirm ongoing accuracy, making maintenance straightforward and cost‑effective in continuous production environments. Fast retrofit to Digital‑Uni calipers for workflow efficiency Designed specifically for the Digital‑Uni caliper family (series 240.201–240.205), the insert delivers a quick, tool‑free upgrade path for existing instruments. Retrofit capability allows established measuring routines to be extended without purchasing a dedicated specialised gauge, improving resource utilisation and reducing capital expense. The compatibility also preserves the digital readout and data capture workflow of the parent instrument, keeping inspection records consistent and traceable. Practical handling and application benefits in everyday use With a compact overall footprint and a mass of only 0.04 kg, the insert is easy to mount and manoeuvre within assemblies or confined areas. The narrow, flat face gives clear tactile feedback when seating into a groove, translating operator action into a reliable measurement trace. This accessory suits workshop and toolroom tasks where internal features start at 20 mm and precision is required without complex setup. For traceable inspection, the insert is supplied as an accessory for the caliper family and integrates into existing quality routines. Choose the Metav IndustryLine M240.214 insert to extend the capability of Digital‑Uni calipers with a corrosion‑resistant, groove‑optimised contact; contact Metav Werkzeuge for application advice or to request a quotation through the Emmerich quality centre Technical data Article number: M240.214 GTIN: 4061905053719 Weight: 0.04 kg Material: stainless steel Facts Measuring face: 6.5 x 1 mm Insert contact length: 30 mm Overall length: 54 mm Internal measurement start: from 20 mm Special features Compatible with Digital‑Uni calipers series 240.201–240.205 Flat measuring face for groove measurement Corrosion‑resistant construction Compact, light accessory for retrofit FAQ Can this insert be used with any digital caliper? The insert is designed specifically for the Digital‑Uni caliper family (series 240.201–240.205); use with other models may require adaptation or may not provide secure mounting. The M240.214 inside measuring insert is intended to preserve the original caliper fit and function. What types of features is the insert best suited to measure? This accessory is optimised for grooves, narrow slots and internal profiles where a flat measuring face improves contact repeatability. The M240.214 performs best on internal features starting at 20 mm and where a defined contact geometry is required. How does the flat measuring face improve measurement results? The 6.5 × 1 mm flat face concentrates contact to a stable surface, reducing rocking and undefined contact conditions in narrow slots. This yields more reproducible readings compared with blunt or rounded probes when assessing groove widths or profile dimensions. Is a calibration certificate supplied with the insert? The M240.214 is supplied as a measuring accessory; calibration status is managed at the instrument level. If a certified calibration is required for a complete measuring system, please clarify requirements when ordering so the appropriate calibration workflow can be arranged. What material is used and how does it affect longevity? The insert is made from stainless steel, offering corrosion resistance and dimensional stability under normal workshop conditions, which supports sustained accuracy and reduces the need for frequent replacement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Internal Measuring Insert, 5×2mm Pin Measuring Faces, L40 For Digital Precision Caliper Series 240.201–240.205 - Metav IndustryLine
Benefit from precise internal measurement starting at 20 mm, a compact 5 × 2 mm pin measuring face and robust stainless‑steel construction for repeatable shop‑floor results; order the insert directly via Metav Werkzeuge or consult our advisors for integration support. Internal measuring insert M240.222 — stainless steel, 5×2 mm pin measuring face for Digital‑Uni calipers The Internal measuring insert M240.222 is an accessory for extending the internal measuring capability of Digital‑Uni calipers in the 240.201–240.205 series, enabling reliable measurement of bores and grooves from 20 mm upwards. Precision pin measuring face 5 x 2 mm Stainless steel construction for wear resistance Fits Digital‑Uni calipers series 240.201–240.205 Confident internal measurement for bores and grooves The insert converts a standard digital caliper into a specialised internal gauge for bores, slots and grooves starting from 20 mm, delivering a controlled contact area with its 5 × 2 mm pin measuring face. The reduced contact footprint permits access to narrow features while maintaining a defined seating point, which reduces measurement variability. Because the accessory is purpose‑made for internal checks, it supports quicker inspection cycles and fewer tool changes, helping to keep production flowing with measurable consistency. Robust stainless‑steel design for repeatable results Manufactured from stainless steel, the insert resists corrosion and abrasion encountered in typical workshop environments, so dimensional stability is preserved over repeated use. The modest mass contributes negligible inertia at the caliper jaws, while the construction ensures that the contact geometry remains intact under normal handling. These attributes together increase repeatability of internal measurements and lower the risk of wear‑induced deviation that otherwise necessitates frequent replacement or rework. Fast retrofit and reliable compatibility with existing calipers Engineered to match the mounting geometry of the Digital‑Uni series 240.201–240.205, the insert installs with minimal adjustment, reducing downtime during tool changes. The compact overall profile and a pin length of 40 mm balance reach and rigidity, while the overall length of 65 mm keeps handling comfortable. For workshops standardising inspection tooling, this accessory offers a pragmatic upgrade route that extends the capability of existing Digital‑Uni calipers without the need for additional dedicated instruments. For advice on integrating the Metav IndustryLine internal measuring insert into inspection routines, or to arrange supply from Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 — our specialists will advise on compatibility and delivery. Technical data Article number: M240.222 GTIN: 4061905053740 Weight: 0.05 kg Material: rostfreier Stahl Length (overall): 65 mm Pin length: 40 mm Facts Internal measuring from 20 mm Pin measuring face: 5 x 2 mm Compatible series: 240.201–240.205 Weight: 0.05 kg Special features Stainless‑steel construction Designed for internal bore and groove measurement Retrofit for Digital‑Uni calipers Compact, low‑mass accessory for minimal inertia FAQ What measurement range does the insert cover? The insert enables reliable internal measurement from 20 mm upwards when mounted on the Digital‑Uni caliper series; the defined pin face is intended for bores and narrow grooves. Which calipers are compatible with this accessory? This accessory is made for Digital‑Uni calipers in the 240.201–240.205 range; the mount and dimensions match those models for a secure retrofit. What is the contact geometry of the measuring face? The measuring face on the insert is a 5 x 2 mm pin, offering a small, well‑defined contact area for repeatable internal checks. How durable is the insert in a workshop environment? Constructed from stainless steel, the insert resists corrosion and wear typical of shop use, preserving contact geometry and repeatability over time. How does the insert affect handling and balance of the caliper? With a low mass of 0.05 kg and compact dimensions, the accessory imposes minimal additional inertia, maintaining the caliper’s handling characteristics while extending its function. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Tapered Measuring Cone, Offset 300mm, b50 a112 - Metav IndustryLine
Take advantage of precise alignment and repeatable positioning thanks to the combination of a 20 mm cone tip and compact geometry (b = 50 mm, a = 112 mm), which speeds up fixture set-up and reduces measurement variation. Order the measuring cone directly via Metav Werkzeuge or consult the product specialists for compatibility advice. Measuring cone 20 mm for 240.293 — precision cone for fixture alignment (Metav IndustryLine) The measuring cone 20 mm for 240.293 is a dedicated alignment accessory designed to work with the M240.293 measuring fixture; it provides a defined contact point for repeatable positioning in systems with a 300 mm hole spacing. 20 mm cone diameter for defined contact Compatible with M240.293 measuring system Lightweight construction for simple handling Faster, repeatable set-ups through defined contact geometry The conical tip with a 20 mm diameter establishes a precise contact interface that reduces positional ambiguity when locating holes or reference points on a fixture. Matched to the M240.293 system and its hole spacing of 300 mm, the shaped contact reduces re‑clamping time and supports consistent measurement chains. This mechanical definition translates into fewer alignment iterations and a lower risk of cumulative error in production or inspection workflows, improving throughput in metrology‑driven applications. Compact form and ergonomic handling for workshop use With segment dimensions of b = 50 mm and a = 112 mm, the accessory remains compact while offering sufficient reach for many fixture geometries. The low mass (approx. 0.2 kg) makes handling straightforward during frequent set‑up changes and minimises the effect of operator fatigue on process speed. The concise dimensions are particularly suitable where a clear datum point is required without adding excessive overhang or leverage that could affect stability during measurement. Practical applications and integration with inspection processes Designed as an accessory for bench and fixture metrology, the cone supports reliable centring and reference establishment for both component set‑up and follow‑up inspection. The defined geometry aids optical or tactile measurement systems by providing a consistent mechanical reference, which helps to reduce scatter between successive readings. Integration with standard measuring rigs is simplified by the explicit compatibility with the M240.293 designation and the matching 300 mm hole pattern, enabling smooth incorporation into established inspection procedures. For assured compatibility and supply of Metav IndustryLine accessories, contact Metav Werkzeuge to request the M240.293.A measuring cone or advice on fixture integration; consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M240.293.A GTIN: 4061905053801 Label: Messkegel 20 mm for 240.293 (Bohrabstand‑MS 300 mm) Facts Cone diameter: 20 mm Length a: 112 mm Length b: 50 mm Weight: 0.2 kg Hole spacing (MS): 300 mm Special features Compatible with M240.293 measuring system Defined contact geometry for repeatable positioning Compact design for workshop and fixture use FAQ What is the primary purpose of this measuring cone? The measuring cone provides a defined contact point for repeatable positioning and alignment within M240.293‑based fixtures, helping to reduce setup time and measurement variation. Is the cone compatible with existing M240.293 fixtures? Yes, the cone is listed for use with the M240.293 measuring system and matches the 300 mm hole spacing specified for that fixture family. What are the physical dimensions and weight of the cone? The cone features a 20 mm tip diameter with segment lengths of 50 mm and 112 mm respectively and weighs approximately 0.2 kg. Can this accessory improve throughput in inspection routines? When used as a defined mechanical reference in a metrology set‑up, the cone contributes to faster, more repeatable set‑ups and can reduce the need for repeated adjustments during inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
210mm Digital Precision Caliper Colour Touchscreen Wireless/USB IP54, ISO 17025 Calibrated - Microtech Metrology
Benefit from traceable accuracy and fast data capture: the combination of ISO 17025 calibration, 0.005 mm resolution and Wireless+USB connectivity delivers consistent measurement results and efficient documentation. Order the Messschieber directly via Metav Werkzeuge or ask our consultants for tailored advice. Messschieber Digital Caliper — 1.5" colour touchscreen, Wireless+USB (Microtech Metrology) The Messschieber is a digital precision caliper for workshop and quality control use, covering a 10–210 mm measuring range and designed for repeatable dimensional checks in machining and inspection tasks. ISO 17025-calibrated delivery Wireless and USB data output 1.5" colour touchscreen display IP54 dust and splash protection Fast, reliable data capture for modern inspection workflows The instrument combines a 1.5" colour touchscreen with Wireless+USB data transfer to simplify documentation and reduce transcription errors. The visual display accelerates read‑out in busy environments, while digital export supports inspection software and SPC systems. With IP54 protection, the unit tolerates workshop dust and incidental splashes, keeping data capture reliable even at the machine bench. These connectivity features translate directly into time savings during set‑up and measurement logging. Traceable precision that supports quality management Calibrated and supplied with a certificate according to ISO 17025, this digital caliper meets the traceability demands of accredited laboratories and in‑house quality systems. The device offers a 0.005 mm display step, improving resolution for fine measurements and enabling tighter control over tolerances than standard 0.01 mm instruments. Classified in the standard size class for calipers, the 10–210 mm range is ideal for routine workshop checks where reach, rigidity and ergonomic handling must balance. Practical design that eases everyday measuring tasks Measured contact force is specified at 1–20 N, which helps maintain consistent measuring pressure and reduces operator‑dependent variation. The digital interface and compact jaws make the tool suitable for common external, internal and step measurements found in production and maintenance. Built for workshop use, the instrument combines robust protection, intuitive controls and direct data links so that measurement routines become faster and less error‑prone — a pragmatic choice for machine shops and inspection benches that require dependable repeatability. For traceable workshop precision and smooth data integration, contact Metav Werkzeuge in Emmerich to request the Microtech Metrology digital caliper with ISO 17025 calibration and Wireless+USB output: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 141730207 GTIN: 4061905037047 Manufacturer: Microtech Metrology Facts Measuring range: 10–210 mm Resolution / display step: 0.005 mm Measuring force: 1–20 N Protection class: IP54 Display: Colour 1.5" touchscreen Data output: Wireless+USB Calibration: ISO 17025 certificate included Special features Digital caliper design Workshop‑proof housing Suitable for external, internal and step measurements Designed for QC and production use FAQ What measuring range does the caliper cover? The caliper covers a 10–210 mm range, placing it in the standard class for workshop and machine‑building inspections. Is a calibration certificate supplied? Yes, the instrument is delivered fully calibrated with an ISO 17025 calibration certificate from Microtech Metrology. How is measurement data transferred to a PC? Data can be exported via Wireless+USB interfaces, enabling direct capture into inspection software or SPC systems. What resolution and accuracy can be expected? The display step is 0.005 mm, offering finer read‑out than common 0.01 mm instruments and supporting tighter tolerance checks. Can the caliper be used in a production environment? Yes, with IP54 protection and a rugged digital design the caliper is suited to workshop conditions and regular production use. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
210mm Digital Precision Caliper For Bore Pitch Measurement Swiss Digital Display IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of high shop-floor reliability and traceable laboratory calibration: this digital precision caliper combines robust IP67 protection with an ISO 17025 calibration certificate for consistent results and documented traceability. Order the instrument via Metav Werkzeuge or contact their consultants for application advice and certification details. Microtech Metrology Precision Caliper 10–210 mm — Digital, IP67, ISO 17025-calibrated The Precision Caliper 10–210 mm is a digital measuring instrument for machine‑shop and quality‑control tasks, combining a clear Swiss digital readout with rugged dust‑ and water‑resistance for repeatable measurements in production environments. Digital readout Swiss 11 mm high IP67 protection for coolant and dust ISO 17025 calibration certificate included Hand-finished measuring jaws Traceable accuracy and certified measurement results Calibrated to ISO 17025, this instrument delivers documented traceability suitable for internal quality control and incoming inspection. The electronic readout offers a 0.01 mm resolution, ensuring that measurements are presented clearly and consistently; the included calibration certificate records the reference conditions and results. Such certification supports audit trails and reduces uncertainty when measurements are used for production decisions or delivered with parts. Rugged build designed for industrial use With IP67 protection and a self‑lubricating slide, the caliper tolerates typical shop‑floor influences such as coolant, chips and dust without losing performance. Hand‑finished measuring jaws provide refined contact geometry for reliable seating on workpieces, and the construction focuses on stiffness and wear resistance to prolong service life. Classified in the Standard measuring range (max 100–300 mm), the instrument balances reach and rigidity for everyday tasks in metalworking and toolrooms. Fast, readable measurements for efficient workflows The Swiss Digital display (11 mm digit height) promotes fast reading under workshop lighting and speeds up inspection cycles. Covering 10–210 mm, the instrument suits common applications from small components to larger assemblies without switching tools, reducing handling time. Ergonomic slide control and a compact jaw profile enable single‑hand operation and reliable repeatability, supporting higher throughput in production and inspection routines. For application support, specification matching and to obtain the ISO 17025 documentation for the Microtech Metrology Precision Caliper 10–210 mm, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: 141730203 GTIN: 4061905036798 Manufacturer: Microtech Metrology Display: Swiss Digital, height 11 mm Core specifications Measuring range: 10–210 mm Resolution: 0.01 mm Protection class: IP67 Calibration: ISO 17025 Special features Hand-finished measuring jaws Self-lubricating slide Measurement range classification: Standard (max 100–300 mm) Digital electronics suitable for shop‑floor use Delivered with calibration certificate FAQ What accuracy and resolution does the Precision Caliper 10–210 mm offer? The Precision Caliper 10–210 mm provides a display resolution of 0.01 mm and is delivered with an ISO 17025 calibration certificate to ensure traceability and documented measurement conditions. Is the Precision Caliper 10–210 mm suitable for workshop conditions? Yes. The Precision Caliper 10–210 mm features IP67 protection and a self‑lubricating slide, designed to withstand dust and coolant exposure common in machine shops. Does the instrument arrive with a calibration certificate? Delivery of the Precision Caliper 10–210 mm includes an ISO 17025 calibration certificate, confirming the device has been calibrated under laboratory conditions and providing documented traceability. Which measurement tasks is the Precision Caliper 10–210 mm intended for? The Precision Caliper 10–210 mm is intended for routine shop and inspection measurements within its 10–210 mm range and is classified in the Standard category for machine‑shop and metal‑fabrication use. How readable is the display under typical lighting? The Precision Caliper 10–210 mm uses a Swiss Digital display with 11 mm high digits for improved legibility on the shop floor and in inspection areas. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
22-200mm Internal Caliper Sharp Jaws Microcomputer Display Wireless USB IP54 - Microtech Metrology
The combination of dependable precision, robust data transfer and workshop suitability ensures consistent internal measurements and fewer reworks; ideal for standard machine‑shop tasks. Order the instrument directly via Metav Werkzeuge or ask the consultants if further specification is required. Internal digital caliper — Microtech Metrology, 22–200 mm, Wireless + USB The Internal digital caliper is a workshop‑grade measuring instrument for reliable internal measurements in machining and quality control applications. *Colour 1.54" digital display *Wireless and USB data output *IP54 splash‑resistant protection *Accuracy ±0.03 mm for dependable checks *Measuring range 22–200 mm standard class Faster decisions through measurable accuracy A focus on measurable performance means the device delivers repeatable results that speed inspection cycles and reduce costly rework. The instrument offers ±0.03 mm accuracy, which is appropriate for standard quality control scenarios in metalworking and tooling. Calibrated procedures in the production chain benefit from a consistent tolerance band, and the clear 1.54" colour display presents readings with minimal interpretation time. By combining a precise sensor package with straightforward readout, the tool shortens inspection throughput without sacrificing traceability. Built for standard workshop tasks and extended reach With a measuring range of 22–200 mm, this tool falls into the standard category for calipers, providing an effective balance between reach and rigidity for everyday machining tasks. Those lengths are typically the workshop backbone for components, fixtures and assemblies where single‑hand operation and firm guidance are advantageous. The measuring span covers common internal diameters and bores encountered in engineering workshops, making the caliper a practical choice for maintenance, bench metrology and small‑batch production checks. Seamless data capture for quality workflows Data transfer is implemented via wireless and USB outputs, enabling direct collection into inspection software or spreadsheets and reducing transcription errors during logging. The digital interface, paired with the colour display, supports quicker verification and simplifies digital record keeping for traceability. For environments that demand documentation of measurement results, the device integrates with typical data‑capture routines, helping to maintain audit trails and expedite reporting. Durable design that suits the shop environment Engineered for the realities of everyday use, the instrument carries IP54 protection against dust ingress and splash water, so it withstands common workshop conditions. The construction supports reliable jaw alignment and stable sliding action, which helps maintain accuracy across repeated measurements. Ergonomic considerations in the slide and thumb‑rest reduce operator variation, contributing to more reproducible readings and a lower rate of measurement‑related rework. Choose Microtech Metrology's internal digital caliper for dependable in‑process measurements and rely on Metav Werkzeuge in Emmerich for fast supply and practical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141210207 GTIN: 4061905457661 Manufacturer: Microtech Metrology eClass: 21170344 Facts Measuring range: 22–200 mm Resolution / reading: 0.005 mm Accuracy: ±0.03 mm Display: Colour 1.54" Protection class: IP54 Special features Digital device with wireless and USB data output Classification: Standard (measuring range up to 300 mm) Intended for internal measurements and workshop inspection Suitable for machine‑shop quality control workflows FAQ What measuring range does the instrument cover? The instrument covers a measuring range of 22–200 mm, making it suitable for standard workshop internal measurements. What accuracy and resolution can be expected? Accuracy is specified at ±0.03 mm with a resolution / reading increment of 0.005 mm for fine indication of changes during inspection. How can measurement data be exported? Data export is available via wireless connection and USB, enabling direct capture of readings into inspection systems or spreadsheets. Is the caliper protected for workshop environments? Yes, the device carries an IP54 rating, offering splash resistance and protection against dust typical in machining areas. Which applications suit this caliper best? This instrument is aimed at internal diameter checks, inspection of bores and routine machining quality control tasks within a standard workshop setting. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
22-200mm Internal Digital Caliper Digital Display 13mm, IP54, USB Connection - Microtech Metrology
Take advantage of robust IP54 protection, a clear 13 mm digital display and reliable USB data output to document internal dimensions from 22 to 200 mm with workshop-grade accuracy; order the Internal Caliper directly via Metav Werkzeuge or ask our consultants if needed. Microtech Metrology Internal Caliper — Digital internal measuring caliper, 22–200 mm, USB The Microtech Metrology Internal Caliper is a purpose-built digital instrument for fast, repeatable internal measurements in machine shops and inspection benches. Digital display 13 mm for clear readout USB data output for traceable results IP54 splash and dust protection Accuracy ±0.03 mm for workshop control Precise, repeatable internal measurement for everyday quality control This instrument covers a measuring range of 22–200 mm, which places it in the standard range best suited to everyday tasks in metalworking and machine construction. The specified accuracy of ±0.03 mm supports routine quality checks and dimensional control on components such as bore diameters, recesses and fitted housings. The digital readout offers a high-contrast 13 mm display, reducing interpretation errors and speeding up measurement cycles. Together, these characteristics deliver a dependable balance of reach and rigidity for workshop environments where reproducible results matter. Efficient data handling and durable construction for traceability Equipped with a USB data output, the caliper streamlines transfer of measured values to inspection software and spreadsheets, supporting documentation and process traceability without manual re-entry. The IP54 rating protects against dust ingress and splashes, extending service life under workshop conditions. These practical features reduce administrative overhead and help integrate measurement routines into production control systems, making digitised record-keeping straightforward and reliable. Ergonomic form and application-focused design The instrument’s jaw geometry and a 100 mm beak length enable comfortable access to internal features while maintaining stable contact points. The tool is optimised for internal measurement tasks — including small bores, grooves and stepped recesses — and its 0.01 mm readability supports fine adjustment and decision-making in assembly and inspection. Lightweight handling and a clear layout contribute to efficient measurement cycles and reduced operator fatigue during repetitive inspections. For tailored advice on integrating this Microtech Metrology digital internal caliper into inspection routines or for procurement from Metav Werkzeuge in Emmerich, please contact our specialists via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data Article number: 141210200 GTIN: 4061905082054 Manufacturer: Microtech Metrology ECLASS: 21170344 Facts Measuring range: 22–200 mm Readability: 0.01 mm Accuracy: ±0.03 mm Display height: 13 mm Jaw/beak length: 100 mm Protection class: IP54 Data output: USB Special features Digital internal caliper USB data interface for export Workshop-suitable protection (IP54) Standard-range instrument for machine and metalworking FAQ Is the caliper suitable for bore and groove measurements? Yes. The internal caliper is designed for internal dimensions such as bores, grooves and stepped recesses across its 22–200 mm range. How is measurement data transferred from the instrument? Measurement values are exported via the built-in USB data output to inspection software or spreadsheets for traceable records. What accuracy and resolution can be expected? The instrument provides a readability of 0.01 mm and an accuracy of ±0.03 mm, appropriate for standard workshop quality control. Does the instrument tolerate workshop conditions such as splashes and dust? The caliper carries an IP54 protection rating, offering resistance against dust ingress and splashing water typical in workshop environments. Which SKU should be quoted when ordering or requesting spare parts? Quote SKU 141210200 when enquiring about this digital internal caliper or ordering accessories. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
22-200mm Internal Digital Caliper Swiss Digit 11mm Display Wireless, IP67 - Microtech Metrology
Take advantage of a rugged, IP67‑rated design combined with wireless data transfer and a clear Swiss Digit 11 mm display to speed up inspection routines and reduce documentation errors; the device’s ±0.03 mm accuracy and 22–200 mm measuring span make it an efficient choice for standard workshop tasks — order via Metav Werkzeuge or contact the advisers in Emmerich for tailored advice. Internal Digital Caliper — IP67, wireless data output Internal Digital Caliper is a compact, shop‑ready measuring instrument for internal and external checks across standard workshop components, ideal for assembly benches and quality control stations. Wireless data output for seamless logging IP67 dust and water protection Swiss Digit 11 mm high-contrast display Accuracy ±0.03 mm for reliable checks Dependable precision for everyday quality control The caliper is designed for routine measurement tasks that demand consistent results: with a measuring range of 22–200 mm it falls into the standard category, offering the best balance between reach and rigidity for general engineering and metalworking applications. The instrument’s ±0.03 mm specification delivers trustworthy repeatability for inspection work, reducing the need for secondary verification. For operators unfamiliar with the term, the accuracy figure indicates the maximum deviation expected under defined conditions, which translates into predictable part tolerances and fewer rejects on the production line. This reliability supports faster decision‑making at first article inspection and in-process checks. Faster data capture and clearer readings to improve throughput Equipped with a Swiss Digit 11 mm display and wireless data transmission, the caliper reduces manual logging and visual strain during extended measuring sessions. The tall, high‑contrast digits mean measurements can be read at a glance on the workshop floor, while wireless output allows direct transfer into inspection software or spreadsheets, cutting transcription time and human error. Integrating electronic measurement into documented workflows streamlines traceability: recorded values can be linked to batch numbers and inspection records without extra steps, improving documentation efficiency for quality systems and audits. Robust construction for the industrial environment Engineered for use beyond the controlled lab, the caliper’s IP67 rating protects against dust ingress and temporary immersion, making it suitable for machining centres and near‑coolant environments where splash resistance matters. A practical jaw length of 100 mm supports secure contact and stable probing in internal bores or between faces, improving handling and repeatability. The digital electronics are sealed and the mechanical slide is finished for smooth movement; together these features translate into lower downtime and less frequent recalibration. For procurement teams, the combination of durable design and integrated data handling supports a measurable efficiency gain in shop‑floor measurement routines. Choose Microtech Metrology’s IP67 wireless caliper for reliable, shop‑ready measurement — contact Metav Werkzeuge in Emmerich for technical consultation and to arrange supply directly from our warehouse. Technical data Article number: 141210204 GTIN: 4061905457791 Brand: Microtech Metrology IP protection: IP67 Display: Swiss Digit 11 mm Facts Measuring range: 22–200 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Jaw length: 100 mm eClass: 21170344 Special features Wireless data output Digital caliper construction High-contrast Swiss Digit display Suitable for standard workshop and QC use FAQ What measuring range does this caliper cover? The Internal digital caliper from Microtech Metrology covers a measuring span of 22–200 mm, which places it in the standard category for general machine‑shop work. How precise is the measurement? The instrument provides an accuracy of ±0.03 mm with a display resolution of 0.01 mm, suitable for routine quality control and production checks. Can measurement data be exported electronically? Yes — the caliper is specified with wireless data output, enabling direct transfer of readings into inspection software or data‑logging systems. Is the caliper protected against coolant and dust? The device has an IP67 rating, offering protection against dust ingress and temporary immersion, making it robust for typical workshop environments. Which display type is used for readability? A high‑contrast Swiss Digit 11 mm display is fitted to ensure clear, fast readings on the shop floor. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
22-200mm Internal Digital Caliper Swiss Digit Display 0.01mm Resolution IP67, Calibrated Certificate - Microtech Metrology
Take advantage of the combination of high-resolution measurement (0.01 mm), robust IP67 protection and a clear Swiss Digit display for reliable workshop quality control; order the Internal Digital Caliper directly via Metav Werkzeuge or consult our specialists for application advice. Internal Digital Caliper — IP67 protection, Swiss Digit 11 mm (Microtech Metrology) The Internal Digital Caliper is a rugged, workshop-ready digital measuring instrument suitable for precise internal and external measurements in standard machine and metalwork applications. IP67 dust and water protection Swiss Digit display, 11 mm height Resolution 0.01 mm, accuracy ±0.03 mm Measuring range 22–200 mm Achieve repeatable quality with measurable precision The instrument provides a resolution of 0.01 mm and an accuracy of ±0.03 mm, values that match common industrial expectations for digital calipers up to 300 mm. This level of detail supports reliable inspection routines and reduces scrap by detecting deviations early in the process. The short-to-medium measuring span of 22–200 mm places the tool in the standard workshop category, offering a balanced combination of reach and stiffness that is ideal for daily tasks in machine shops, maintenance and small-series production. The precise readout and consistent mechanics make the caliper suitable for routine quality checks and first-article inspections. Robust design for demanding shop environments Designed for use at the bench and on the shop floor, the caliper features IP67 protection, which guards the electronics against dust ingress and temporary immersion. This durability means fewer service interruptions and longer service life in harsher environments. The device is constructed as a digital measuring instrument with sturdy jaw geometry and a 100 mm jaw length, giving stable contact when taking internal measurements. The rugged housing and sealed display reduce the risk of measurement error caused by contamination or moisture, supporting dependable operation across shifts. Clear display and practical handling for efficient workflows The Swiss Digit display, with a character height of 11 mm, enhances legibility—especially in busy production areas—so readings are quick to capture and transfer into inspection records. The caliper’s user-focused layout and smooth slider movement speed up repetitive measurements and reduce operator fatigue. Integration into existing inspection routines is straightforward thanks to the familiar digital interface and clear numeric output. For teams aiming to improve throughput without sacrificing accuracy, the caliper delivers a pragmatic balance of usability and technical performance. Contact Metav Werkzeuge today for tailored advice on integrating the Microtech Metrology Internal Digital Caliper into inspection routines or to request a quote from our Emmerich-based specialists Technical data Article number: 141210203 GTIN: 4061905457777 Manufacturer: Microtech Metrology Facts Measuring range: 22–200 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display: Swiss Digit, 11 mm height Protection class: IP67 Special features Digital caliper construction 100 mm jaw length Suitable for standard machine and metalwork inspections FAQ What measuring range does the caliper cover? The caliper covers a measuring span of 22–200 mm, making it suitable for standard workshop tasks that require both fine detail and practical reach. How precise is the instrument for quality control? With a resolution of 0.01 mm and an accuracy of ±0.03 mm, the instrument supports routine quality-control measurements consistent with industrial digital caliper standards. Is the device suitable for use in workshops with coolant or dust? Yes. The caliper’s IP67 protection rating ensures resistance to dust ingress and temporary immersion, making it appropriate for harsh workshop environments. Can the tool measure internal and external dimensions? The sliding jaw geometry permits both internal and external measurements as well as depth and step checks typical for calipers of this design; refer to SKU 141210203 for the exact configuration. What display features improve usability in production? The Swiss Digit display with 11 mm character height provides high legibility for fast reading and reduces interpretation errors during repetitive inspection tasks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
22-300mm Internal Digital Caliper Swiss Digit Display 0.01mm Resolution IP67 - Microtech Metrology
Take advantage of the combination of robust ingress protection, clear Swiss Digit read‑out and a practical 22–300 mm measuring range for reliable internal dimension control in production and workshop environments; order the Internal Digital Caliper directly via Metav Werkzeuge or ask our consultants if needed. Internal Digital Caliper by Microtech Metrology — IP67, 22–300 mm range The Internal Digital Caliper from Microtech Metrology is a rugged, workshop‑ready instrument for precise internal dimension checks across the standard 22–300 mm range. IP67 dust- and water-resistant housing Swiss Digit 11 mm high-contrast display Measurement range 22–300 mm for workshop standards Reliable precision that keeps production moving With a stated accuracy of 0.05 mm and a display resolution of 0.01 mm, this instrument delivers measurable improvements in inspection speed and repeatability compared with analogue gauges. The caliper’s measuring span is classified within the standard range (max 300 mm), which offers an optimal balance of reach and rigidity for general engineering, maintenance and quality‑control tasks. The clear numeric read‑out reduces interpretive error, shortening cycle times in repetitive checks and supporting faster decision‑making on the shop floor. Robust construction and a clear digital display for fewer interruptions The IP67 rating means the device resists dust ingress and temporary immersion, protecting the electronics during everyday use and cleaning. The Swiss Digit 11 mm display provides high‑contrast digits that are readable under factory lighting, reducing eye strain and missed readings. A longer internal jaw (150 mm) helps access deeper bores and recessed features without improvised fixturing. Together, these design choices lower downtime and the need for repeat measures, supporting a smoother production flow. Practical features that support traceable workshop inspection Designed by Microtech Metrology for routine internal measurements, the instrument is suited to both standalone checks and batch inspection routines. The compact electronics and ergonomic slide mechanism permit single‑hand operation for quick sampling; the robust enclosure reduces risk of damage from coolant splash or fine particulate. For purchasers seeking a dependable, entry‑to‑mid level digital measuring tool, this caliper bridges bench‑tool convenience with industrial resilience, making it a solid choice for machine shops and service departments. Contact Metav Werkzeuge today to discuss how Microtech Metrology’s IP67 internal digital caliper can improve inspection reliability in your workshop — call +49 2822 7131930 or email info@metav-werkzeuge.com for personalised advice and immediate ordering support Technical Data Article number (SKU): 141210303 GTIN: 4061905457784 Manufacturer: Microtech Metrology Digital display: Swiss Digit, 11 mm Protection class: IP67 Facts Measuring range: 22–300 mm Resolution: 0.01 mm Accuracy: 0.05 mm Inner jaw length: 150 mm Special features Digital instrument for internal dimension measurement Workshop‑grade ingress protection High‑contrast numeric read‑out FAQ What measurement tasks is this caliper best suited for? The internal digital caliper is tailored to internal dimension checks—bores, recesses and similar features—across the 22–300 mm span, making it suitable for general machine‑shop and maintenance inspection. How precise is the instrument for routine quality control? The caliper provides a resolution of 0.01 mm and a declared accuracy of 0.05 mm, which is appropriate for standard production sampling and workshop tolerance verification. Does the device tolerate coolant and shop dust? Yes—the IP67 protection rating means the instrument is resistant to dust ingress and temporary immersion, improving durability in harsher workshop conditions. Is the read‑out easy to read under factory lighting? The Swiss Digit 11 mm display offers high‑contrast numerals designed for clear readability in typical workshop illumination, reducing reading errors and inspection time. Who manufactures this caliper and where can more technical information be obtained? The instrument is produced by Microtech Metrology; further product and ordering details are available from Metav Werkzeuge. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2500mm Built-In Digital Caliper Colour 2.4" Touchscreen, Wireless USB, IP54 - Microtech Metrology
Take advantage of the combination of an extra‑long measuring range (0–2500 mm), Wireless + USB data output and a 2.4" colour touchscreen to measure large components reliably and integrate results into quality workflows; order the built-in caliper directly via Metav Werkzeuge or consult their experts for specification support. Built-in caliper by Microtech Metrology — 2.4" colour touchscreen, 0–2500 mm A built-in caliper designed for extra‑long measurements up to 2,500 mm, combining a clear 2.4" colour touchscreen with wireless and USB data transfer for production and workshop integration. Extra‑long measuring range 0–2500 mm 2.4" colour touchscreen display Wireless and USB data output IP54 protection for workshop use Measure large components with reproducible results The built-in caliper is classified as Extra‑Long (2,000–5,000 mm) and is engineered for large‑format components such as ducts, large housings and segmented assemblies. The extended measuring range 0–2500 mm provides reach without sacrificing handling, while a specified accuracy of 0.07 mm and a display resolution of 0.01 mm make it suitable for routine workshop inspection and process control. The distinction between resolution and accuracy is crucial: the display shows increments at 0.01 mm, but measurement uncertainty is defined by the 0.07 mm tolerance, which informs acceptance criteria for large parts. Integrate measurements into digital workflows Data transfer is simplified by the Wireless + USB outputs and the intuitive 2.4" colour touchscreen, which together reduce manual transcription and speed up batch documentation. Wireless transmission allows defect lists and dimensional logs to be sent directly to inspection software or spreadsheets, while USB provides a reliable wired option for offline capture. The caliper’s digital interface supports faster quality checks and smoother documentation, which translates into higher throughput and fewer process interruptions on the shop floor. Built for everyday production environments With an IP54 protection rating and a purpose‑built installation form, this caliper tolerates dust ingress and water splashes common in manufacturing settings. The robust design aids reproducibility over long measuring lengths by preserving profile stiffness and alignment across the beam. The device’s compact operator interface and straightforward mounting concept reduce setup time for fixtures and gauges, so measurement of large assemblies becomes a routine, dependable step in production and incoming inspection. For dependable extra‑long measurement capability and seamless data integration, contact Metav Werkzeuge to discuss the Microtech Metrology built-in caliper (SKU 142525140) and how it fits into your quality workflow. Technical data Article number: 142525140 GTIN: 4061905458958 Manufacturer: Microtech Metrology Category: Digital caliper Core technical data Measuring range: 0–2500 mm Resolution (display): 0.01 mm Accuracy: 0.07 mm Display: 2.4" colour touchscreen Protection rating: IP54 Special features Data output: Wireless + USB Digital: yes Built-in caliper design eClass: 21170344 FAQ How precise is the device for large components? The built-in caliper (Microtech Metrology, SKU 142525140) has an accuracy of 0.07 mm and a display resolution of 0.01 mm, making it suitable for repeatable dimensional checks on large parts. Can measurement data be exported directly to quality systems? Yes, the caliper offers Wireless + USB data output for direct transfer to inspection software, spreadsheets or data loggers, supporting digital documentation workflows. Is the instrument suitable for use in a production environment? The instrument’s IP54 rating and robust built‑in design make it appropriate for routine workshop use where dust and splash protection are required. What range of parts can be measured with this caliper? With a measuring range of 0–2500 mm, the device is tailored to extra‑long components such as large housings, pipes and segmented assemblies where extended reach is essential. Does the display support straightforward operation on the shop floor? The 2.4" colour touchscreen provides clear readout and simple control, reducing operator training time and speeding measurements during series checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2500mm Built-In Digital Caliper With Colour 2.4" Touchscreen, Wireless/USB, ISO 17025 Calibration Included - Microtech Metrology
Take advantage of a combination of long‑span measurement capability, micrometre‑level resolution and traceable calibration for reliable inspection of large components; the unit’s Wireless + USB connectivity and integrated touchscreen speed up data capture and downstream processing. Order through Metav Werkzeuge or ask the consultants for configuration guidance. Built-in caliper — Digital instrument with 2.4" colour touchscreen and 0–2,500 mm range (Microtech Metrology) A built-in caliper designed for precision measurement of large assemblies, offering an extra‑long range up to 2,500 mm with digital readout and modern data interfaces for integration into workshop and production environments High‑precision range up to 2,500 mm Colour 2.4" touchscreen display Wireless and USB data output ISO 17025 calibration certificate included Precision over long spans to reduce rework and inspection time The unit is classified for extra‑long measurements and delivers a measuring span to 2,500 mm, which is advantageous when checking large housings, rails or pipes without transferring parts between fixtures. With a reading resolution of 0.001 mm, the instrument supports micrometre‑class differentiation; this level of resolution reduces the need for secondary measurement steps and shortens inspection loops. The built‑in design keeps the measurement axis stable over the full length, enabling reproducible results where stiffness and repeatability are critical. Fast data capture and seamless workflow integration Equipped with a 2.4" colour touchscreen, the instrument simplifies parameter selection and visual confirmation of readings; tactile controls reduce keyboard dependency on the shop floor. Measurement data can be exported via Wireless or USB, allowing direct transfer to inspection software or SPC systems and minimising manual transcription errors. The included HD microscope with a 7" LED display supports visual checks and micro‑inspections alongside dimensional measurement, combining optical verification with numerical data to speed decision making. Robust construction for industrial use and easy mounting The caliper is built from aluminium, chosen for a balance of rigidity and manageable weight in long‑span applications. The profile and carriage geometry are optimised for a built‑in installation, so the instrument integrates neatly into machine tables or gauging fixtures and maintains alignment during repeated use. This construction reduces thermal mass and helps stabilise measurements after short warm‑up periods, which benefits throughput where many large parts are inspected in sequence. Traceable calibration and ready‑to‑use delivery Delivered fully calibrated according to ISO 17025, the instrument arrives with a calibration certificate that documents traceability and measurement conformity for quality records and audits. The calibration and the digital output capabilities make the device suitable for regulated production environments and quality labs that require documented evidence of measurement capability. The accessory set, including the HD microscope with its 7" LED display, provides an immediate, practical extension of the measuring function for combined dimensional and visual inspection tasks. For long‑format measurement tasks, request technical configuration or delivery options from Metav Werkzeuge — Metav’s experts in Emmerich can advise on integration and mounting for the Microtech Metrology built‑in caliper (SKU 142525158); contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 142525158 GTIN: 4061905036934 ECLASS: 21170344 Facts Measuring range: 0–2,500 mm Resolution (reading): 0.001 mm Display size: 2.4" touchscreen Special features Material: aluminium Data output: Wireless and USB Digital display: Colour 2.4" touchscreen ISO 17025 calibrated; calibration certificate included Included accessory: HD microscope with 7" LED display Brand: Microtech Metrology Category: Built‑in caliper (digital) FAQ What measuring range does the instrument cover? The built‑in caliper from Microtech Metrology covers a measuring range up to 2,500 mm and is optimised for extra‑long component inspection (SKU 142525158). Is the device delivered calibrated for acceptance in quality systems? Yes — the instrument is supplied fully calibrated to ISO 17025 standards and includes the calibration certificate for traceability and audit documentation. Which data interfaces are available for recording measurements? Measurement data are available via Wireless and USB outputs to facilitate direct integration with inspection software and data collection systems. Does the package include any optical accessories for visual checks? An HD microscope with a 7" LED display is included, enabling combined dimensional measurement and visual inspection alongside numerical results. What construction materials and mounting style are used? The main profile is aluminium, configured as a built‑in unit suitable for integration into fixtures or machine tables where long, stable measurement spans are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2500mm Digital Precision Caliper Colour Touchscreen Wireless USB ISO 17025 Calibration Roll Case - Microtech Metrology
Take advantage of the combination of an extra‑long 0–2,500 mm measuring range, integrated colour touchscreen and wireless + USB data output for consistent large‑format measurement and faster data capture; delivered fully calibrated to ISO 17025 for traceable quality control. Order the caliper directly via Metav Werkzeuge or ask our consultants for application advice. Messschieber — Extra‑long precision caliper with colour touchscreen and wireless + USB Messschieber is an extra‑long, digitally equipped precision caliper intended for large‑format components and quality control applications in industrial metrology. Extra‑long 0–2,500 mm measuring range Colour 2.4" touchscreen display Wireless and USB data output Delivered calibrated with ISO 17025 certificate Built for reproducible measurement of large components Designed as an extra‑long measuring instrument, this caliper covers a measuring range up to 2,500 mm, making it suitable for large assemblies, housings and pipe work where long, straight measurements are required. The aluminium construction keeps the gauge manageable while maintaining profile stiffness over its length; the 1,000 mm jaw length gives a practical contact area that helps secure stable measurements. This balance of reach and rigidity reduces the need for repeated setups and supports reproducible results across extended surfaces. Digital output and streamlined data capture for production workflows Equipped with a colour 2.4" touchscreen and both wireless and USB data transfer, the device integrates measurement capture directly into inspection routines and digital quality systems. The display provides clear numerical read‑out and straightforward menus, while the 0.01 mm resolution enables standard digital precision for logging and SPC. A controlled measuring force (1–20 N) range supports consistent contact pressure, reducing operator‑induced variation and simplifying data collection in repeated production checks. Calibrated and traceable for certified quality processes This measuring instrument is supplied fully calibrated in accordance with ISO 17025, including a calibration certificate for traceability and documentation within formal quality systems. The delivered certification supports audit readiness and lets the instrument be used immediately in inspection plans that require documented measurement capability. The stated accuracy of 0.14 mm should be considered in relation to application tolerances when specifying the caliper for critical dimensions. Practical handling and workshop compatibility The digital, aluminium body is engineered to be both robust and portable for workshop use, offering easier handling compared with heavier long‑span gauges. The integrated data interfaces remove manual transcription errors and accelerate hand‑over into measurement software or spreadsheets. As a digitally enabled precision instrument, it serves as a practical bridge between bench metrology and production line inspection, reducing administrative effort and supporting systematic quality control. For assistance selecting the right extra‑long caliper for a specific application or for ordering calibrated units from Microtech Metrology, contact Metav Werkzeuge to arrange a technical consultation and secure immediate delivery from Emmerich. Technical data SKU: 142125102 GTIN: 4061905037146 Manufacturer: Microtech Metrology Facts Measuring range: 0–2,500 mm Resolution (display): 0.01 mm Accuracy: 0.14 mm Measuring force: 1–20 N Jaw length: 1,000 mm Special features Material: Aluminium Display: Colour 2.4" touchscreen Data output: Wireless + USB Digital instrument Delivered calibrated to ISO 17025 FAQ Is this caliper suitable for measuring large assemblies and housings? The Messschieber from Microtech Metrology (SKU 142125102) is designed for extra‑long measurements up to 2,500 mm and is suitable for large assemblies where extended reach and reproducibility are required. What accuracy and resolution can be expected? The instrument provides a display resolution of 0.01 mm and the specified accuracy is 0.14 mm, values that should be matched against the tolerance requirements of the inspection task. How are measurement results exported for documentation? Measurement values can be exported via the built‑in Wireless interface or through USB, enabling straightforward transfer to quality management software or spreadsheets. Is a calibration certificate included with delivery? Yes — the caliper is supplied fully calibrated to ISO 17025 and includes the corresponding calibration certificate for traceability and audit purposes. What advantages does the aluminium construction provide? The aluminium design reduces weight for better handling over long lengths while providing sufficient stiffness for reproducible measurements and easier workshop use. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2500mm Digital Precision Caliper With 2.4" Colour Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of an extra‑long 0–2500 mm measuring range, colour 2.4" touchscreen operation and Wireless + USB data output for efficient inspection of large components; the instrument is delivered fully calibrated to ISO 17025 with certificate. Order the digital caliper directly via Metav Werkzeuge or ask the consultants for application support. Digital Caliper by Microtech Metrology — 0–2500 mm, 2.4" Colour Touchscreen, Wireless + USB The Digital Caliper from Microtech Metrology is an extra‑long measuring instrument designed for large‑format inspection and workshop metrology, combining extended reach with traceable calibration and modern data connectivity. Extra‑long 0–2500 mm measuring range Colour 2.4" touchscreen display Wireless and USB data output Delivered calibrated to ISO 17025 Measure large components with repeatable precision This extra‑long instrument covers a 0–2500 mm measuring span, classifying it as an extra‑long caliper suitable for large shafts, pipes and assembly fixtures. The extended jaw geometry, with a 400 mm jaw length, gives the reach required for sizeable parts while the aluminium construction reduces handling weight and lowers operator fatigue during extended inspections. The specified accuracy of ±0.09 mm reflects design choices that favour robust, reproducible measurements across the full length; this makes the caliper well suited to heavy‑duty workshop tasks where reproducibility and manageable handling are priorities. Fast data capture and intuitive operation for workflow efficiency Equipped with a 2.4" colour touchscreen, the instrument provides a clear readout that improves legibility under workshop lighting and simplifies unit switching and zeroing. Data transfer is handled via wireless connectivity and USB, enabling direct logging into quality systems or handheld data collectors and reducing transcription errors. These features accelerate measurement cycles and strengthen process control, delivering a tangible efficiency gain for inspection routines and statistical process control. Traceable calibration and ready‑to‑use delivery The instrument is supplied fully calibrated and accompanied by an ISO 17025 calibration certificate, ensuring measurement traceability and easing incorporation into formal inspection procedures. Calibration to ISO 17025 supports acceptance in regulated environments and provides documented confidence for audits. With that certificate and robust connectivity, the caliper is ready for immediate integration into production quality checks or mobile inspection teams. Contact Metav Werkzeuge to discuss integrating the Microtech Metrology Digital Caliper with its extra‑long 0–2500 mm range and ISO 17025 calibration into existing measurement processes and to request technical advice or ordering details Technical data Article number: 142125142 GTIN: 4061905455650 Brand: Microtech Metrology Category: Digital caliper Key figures Measuring range: 0–2500 mm Accuracy: ±0.09 mm Jaw length: 400 mm Display: Colour 2.4" touchscreen Data output: Wireless + USB Features and materials Material: Aluminium Delivery: Supplied calibrated to ISO 17025 Digital display: Yes Suitable for large‑format workshop inspection FAQ What measuring range does this caliper cover? The Digital Caliper from Microtech Metrology covers a measuring range of 0–2500 mm, which places it in the extra‑long class for large components. Is the instrument delivered calibrated? Yes, the caliper is supplied fully calibrated and includes an ISO 17025 calibration certificate for traceable measurements and audit readiness. How is measurement data transferred from the caliper? Data can be exported wirelessly or via USB, allowing direct capture into inspection software or data loggers for faster quality control. What material is the caliper made from and why does it matter? The frame is made from aluminium, offering a balance of stiffness and lower weight to ease handling during long measurement tasks. Can this caliper be used for production quality control on large parts? Yes, the extra‑long reach, repeatable accuracy and direct data output make the instrument suitable for production inspection of large shafts, pipes and assemblies. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2500mm Digitaler Einbaumessschieber, 0,01mm Auflösung, IP 67, Big Screen Swiss Electronics - Microtech Metrology
Der Einbaumessschieber kombiniert Extra‑Langen Messbereich, robuste IP67‑Schutzart und eine gut ablesbare Big Screen Swiss Electronics Anzeige, sodass große Bauteile sicher und reproduzierbar vermessen werden können. Bestellen Sie den Einbaumessschieber direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Einbaumessschieber von Microtech Metrology Der Einbaumessschieber ist ein digitaler Langschieber für großformatige Messaufgaben und eignet sich speziell für die Messung großer Bauteile in Fertigung und Montage. Extra‑Langes Messformat: bis 2500 mm Robust durch IP 67 Schutzart Großes Display: Big Screen Swiss Electronics Auflösung 0,01 mm für feine Ablesung Geeignet für Rohr‑ und Behälterbau Präzision über lange Strecken für reproduzierbare Messungen Bei langen Messlängen entscheidet Profilsteifigkeit über Reproduzierbarkeit. Der Einbaumessschieber bietet einen Messbereich bis 2500 mm, wodurch er der Kategorie Extra‑Lang zugeordnet werden kann und sich für großformatige Komponenten wie Rohre oder Gehäuse eignet. Durch die Kombination aus stabilem Träger und digitaler Anzeige wird die Messung über mehrere Meter hinweg beherrschbar, während sich manuelle Fehlerquellen verringern lassen. Messgenauigkeit und Anzeige für verlässliche Ergebnisse Die Anzeige ermöglicht eine Auflösung von 0,01 mm, sodass feine Maßabweichungen sichtbar werden. Die angegebene Genauigkeit von 0,09 mm beschreibt die Güte der Gesamtausgabe und sollte bei der Auswahl der Prüfvorschriften berücksichtigt werden. Für Anwender bedeutet das: schnelle Kontrollen mit guter Auflösung und eine spezifizierte Genauigkeit, die sich in Fertigungsabläufe und Prüfprozesse einplanen lässt. Schutz und Zuverlässigkeit in rauer Umgebung Die Schutzart IP67 sorgt dafür, dass der Schieber gegen Staub geschützt ist und kurzfristiges Eintauchen in Wasser unbeschadet übersteht. In Arbeitsumgebungen mit Kühlschmierstoff‑ oder Emulsionskontakt reduziert diese Eigenschaft Wartungsaufwand und Stillstandsrisiken. Die robuste Ausführung macht das Gerät zur zuverlässigen Lösung für Produktionslinien und Montagehallen. Einsatz und Integration in der Werkstattpraxis Dank der großen Anzeige Big Screen Swiss Electronics sind Messergebnisse auch bei schlechtem Licht gut ablesbar, was die Bedienung beschleunigt. Die digitale Architektur erlaubt effiziente Prüfabläufe und erleichtert die Einbindung in dokumentierte Messprotokolle. Anwender können den Schieber dort einsetzen, wo lange Längen und eine praktikable Handhabung gefragt sind, etwa bei Vorrichtungsbau, Rohrmontage oder schweren Baugruppen. Für präzise Langmessungen empfiehlt sich der Einbaumessschieber von Microtech Metrology; bestellen über Metav Werkzeuge oder direkt anfragen per info@metav-werkzeuge.com / Tel. +49 2822 7131930 Produktmerkmale Artikelnummer: 142525147 Marke: Microtech Metrology Bezeichnung: Einbaumessschieber GTIN: 4061905459764 Digitalanzeige: Big Screen Swiss Electronics ECLASS: 21170344 Fakten Messbereich: 0-2500 mm Messbereich max: 2500 mm Auflösung (Ablesung): 0,01 mm Genauigkeit: 0,09 mm Schutzart: IP 67 Besonderheiten Ausführung: Extra‑Lang (Messbereich 2500 mm) Digitale Messung Kategorie: Messschieber Digital Einsatzbereich: großformatige Komponenten FAQ Welche Messlänge deckt der Einbaumessschieber ab? Der Einbaumessschieber von Microtech Metrology deckt einen Messbereich bis 2500 mm ab und ist damit für großformatige Messaufgaben in Fertigung und Montage geeignet (SKU 142525147). Wie fein lässt sich mit dem Schieber ablesen? Die Anzeige des Einbaumessschiebers bietet eine Auflösung von 0,01 mm, sodass kleinste Längenänderungen sichtbar werden; das Gerät kombiniert diese Auflösung mit einer spezifizierten Genauigkeit von 0,09 mm. Ist der Schieber für den Einsatz in feuchten Umgebungen geeignet? Ja. Der Einbaumessschieber besitzt die Schutzart IP 67, wodurch er gegen Staub geschützt ist und kurzzeitiges Eintauchen in Wasser unbeschadet übersteht. Welche Anzeige kommt beim Gerät zum Einsatz? Verwendet wird die Anzeige Big Screen Swiss Electronics, die große, gut lesbare Ziffern für schnelle Ablesung liefert. Für welche Anwendungen empfiehlt sich der Einbaumessschieber? Der Einbaumessschieber eignet sich besonders für Anwendungen im Rohr‑ und Behälterbau, im Vorrichtungs‑ und Formenbau sowie überall dort, wo große Messlängen gefordert sind (Microtech Metrology, SKU 142525147). Hersteller: Microtech; Nizhneyurkovska str., 45a; 04080 Kyiv; Ukraine; tool@microtech.tools
Precision calipers for accurate, repeatable measurement
Calipers are the indispensable length-measuring tools for industry and workshop environments, enabling fast and exact external, internal, depth and step measurements. Our professional range of precision calipers, including vernier calipers, dial calipers and digital calipers, combines mechanical robustness with modern data handling to support consistent quality assurance.
How these calipers work and where they help most
Analogue vernier calipers deliver reliable, autarkic operation via the vernier scale and are best suited to heavy-duty workshop use where durability matters. Digital calipers provide a contrast-rich display, minimise reading errors and speed up inspection routines through functions such as zero setting and data output. At the high end, touchscreen calipers from Microtech feature an integrated microcomputer, colour touch display, built-in error-tolerance checks and wireless data transmission, making them suited for Industry 4.0 workflows. Workshop calipers with extended measuring ranges offer optional fine adjustment and rounded tips for interior measurements, while in-built calipers can be mounted directly to machines or test rigs to monitor travel. Specialty calipers cover tasks such as deep grooves, pipe wall thickness, brake disc inspection, three-point measurements and bespoke geometries.
Tangible benefits that improve production performance
- Faster throughput: digital calipers with data output reduce manual entry and accelerate quality checks.
- Higher repeatability: robust mechanical design and error-tolerance controls raise measurement consistency.
- Flexible integration: wireless data transmission and touchscreen operation simplify digitisation to existing systems.
- Reduced downtime: workshop and in-built variants with fine adjustment minimise rework and set-up time.
- Application coverage: specialty calipers adapt to complex geometries, from three-point checks to deep-niche measurements.
Microtech and metav — quality and supply you can rely on
For high-end, touchscreen-equipped instruments, Microtech represents the technological benchmark thanks to its integrated controls and wireless capabilities. As a precision partner, Metav complements this with decades of experience and a comprehensive offering: more than 250,000 products, a European quality filter in Emmerich and the trust of over 48,000 customers, making Metav a sensible central source for calipers and measuring equipment.
Quick summary
Calipers — from analogue vernier to touchscreen digital — deliver the measurement accuracy and data connectivity modern production demands while reducing inspection time and improving repeatability.
FAQ
What are the main differences between analogue and digital calipers?
Analogue vernier calipers rely on a vernier scale and are prized for ruggedness and independence from power, whereas digital calipers provide a contrast display, zero setting and data output to eliminate readout errors and speed up quality processes.
Can calipers be integrated into a digital inspection workflow?
Yes. Many digital calipers and touchscreen models support data output and wireless data transmission, enabling direct transfer of measurements into quality-management systems or statistical process control.
Which caliper type is best for large measuring ranges in a workshop?
Workshop calipers with extended measuring ranges and optional fine adjustment are designed for large components; they maintain mechanical stability and are available with rounded interior jaws for safer internal measurements.
Are there calipers for specialised geometries like deep grooves or brake discs?
Specialty calipers are explicitly engineered for such tasks. They feature tailored measuring faces for deep-niche measurements, pipe wall thicknesses, brake-disc checks and three-point or flexible geometries.
How do touchscreen calipers from Microtech improve quality control?
Microtech touchscreen calipers combine an integrated microcomputer, colour touch display and built-in error-tolerance checks with wireless data transmission, allowing immediate verification, reduced human error and seamless digitisation in line with Industry 4.0 practices.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com