Precision calipers for reliable industrial measurement
Precision calipers and their variants provide fast, repeatable outside, inside, depth and step measurements to ensure component conformity and process control on the shopfloor, combining mechanical robustness with digital data handling for traceable results. Designed for use in industrial quality assurance and manufacturing, these calipers serve applications from rough workshop environments to precision inspection, with options such as analogue vernier calipers for durable, battery‑free operation and digital calipers offering clear displays and data output to speed up quality workflows. Specialist formats, including workshop calipers with extended ranges and built‑in mounting calipers for machine or fixture monitoring, extend capability to long strokes and embedded measurement tasks, while bespoke models handle deep grooves, pipe wall thicknesses and three‑point or other complex geometries. The range emphasises highest accuracy and process integration, featuring high‑end touchscreen models with integrated microcomputers, wireless data transfer and Industry 4.0 compatibility to modernise measurement and quality data capture.
2500mm Digitaler Messschieber, 0,01mm Auflösung, IP 67, Swiss Electric Display 11mm, kalibriert nach ISO 17025 - Microtech Metrology
Die Kombination aus ISO 17025‑Kalibrierung, robustem IP 67‑Schutz und dem extra‑langen Messfeld bis 2.500 mm sorgt für verlässliche Messergebnisse bei großformatigen Bauteilen; die integrierte, gut ablesbare Swiss Electric‑Digitalanzeige mit 11 mm Höhe und die Ablesung von 0,01 mm vereinfachen die Messabläufe spürbar. Bestellung und Beratung sind über Metav Werkzeuge möglich, bei Bedarf hilft die technische Beratung weiter. Messschieber von Microtech Metrology Der Messschieber mit digitaler Swiss‑Electric‑Anzeige für präzise Längenmessungen bis 2.500 mm im industriellen Einsatz Extra‑langer Messbereich bis 2.500 mm Swiss Electric Digitalanzeige 11 mm hoch IP 67 Schutz für staub‑ und wasserdichten Einsatz ISO 17025 Kalibrierzeugnis inklusive ABS Messsystem für stabile Messergebnisse Robuste Konstruktion für raue Einsatzbedingungen und lange Reichweite Dank des ausgelegten Querschnitts von 53x8 und der Schnabellänge 300 mm bietet dieses Messgerät die nötige Steifigkeit für große Bauteile. Die Konstruktion ist auf wiederholbare Messzyklen in Fertigung und Montage ausgelegt und reduziert durch die stabile Geometrie Messunsicherheiten. Durch den Schutzgrad IP 67 bleibt die Funktionalität auch bei staubiger Umgebung und kurzfristigem Wasserkontakt erhalten, was den Einsatz in Werkstatt und Produktionslinie erleichtert. Kalibrierung und Messgenauigkeit für nachvollziehbare Qualitätssicherung Das Messgerät verfügt über eine Ablesung von 0,01 mm und eine vom Hersteller angegebene Genauigkeit von 0,09 mm, wodurch es sich für Prüfaufgaben mit mittlerer bis großer Reichweite eignet. Die Lieferung erfolgt vollständig kalibriert nach ISO 17025; ein Kalibrierzeugnis wird mitgeliefert, sodass Messergebnisse direkt in Prüfprotokolle und Qualitätssicherungs‑Workflows übernommen werden können. Einfache Bedienung durch digitale Anzeige und durchdachte Messtechnik Die Swiss Electric‑Digitalanzeige mit 11 mm Ziffernhöhe erleichtert das Ablesen auch bei schlechten Lichtverhältnissen und reduziert systematische Ablesefehler. Das ABS‑Messsystem unterstützt reproduzierbare Schieberbewegungen und stabilisierte Noniusfunktionen, wodurch der Bediener schneller und sicherer arbeiten kann. Die Kombination aus digitaler Anzeige und robustem Schlitten verbessert die Alltagstauglichkeit im Werkstattbetrieb. Eindeutige Einordnung für Großbauteile und Anwendergruppen Mit einem Messbereich bis 2.500 mm gehört das Gerät zur Extra‑Lang‑Kategorie und ist für großformatige Komponenten in Rohr‑ und Behälterbau, Schwerzerspanung oder Formenbau ausgelegt. Prüf‑ und Kalibriereinrichtungen, Vorrichtungsbauer sowie industrielle Fertigungen profitieren von der Kombination aus Reichweite, Schutzklasse und Werkskalibrierung. Das Messgerät bietet sich als präzises Messwerkzeug für Anwender an, die lange Messlängen mit dokumentierter Genauigkeit benötigen. Empfehlung: Das Microtech Messschieber mit ISO‑17025‑Kalibrierung direkt über Metav Werkzeuge beziehen und bei technischen Fragen den telefonischen oder schriftlichen Kontakt nutzen: info@metav-werkzeuge.com, +49 2822 7131930. Produktmerkmale Artikelnummer: 141073255 Marke: Microtech Metrology Bezeichnung: Messschieber GTIN: 4061905454486 Messsystem: ABS Fakten Messbereich: 0–2500 mm Ablesung: 0,01 mm Genauigkeit: 0,09 mm Schnabellänge: 300 mm Querschnitt: 53x8 mm Digitalanzeige Höhe: 11 mm Besonderheiten IP 67 Schutz, staub‑ und wasserdicht ISO 17025 Kalibrierung mit Kalibrierzeugnis, nachvollziehbare Prüfprotokolle Digitale Swiss Electric Anzeige, gute Ablesbarkeit ABS Messsystem für stabile Messführung Digitale Ausführung für einfache Integration in Messabläufe FAQ Wie wird die Genauigkeit des Messgeräts dokumentiert? Das Microtech Messschieber (Artikelnummer 141073255) wird vollständig nach ISO 17025 kalibriert ausgeliefert; das mitgelieferte Kalibrierzeugnis dokumentiert die Messwerte und erleichtert die Einbindung in Zertifizierungs‑ und Prüfprozesse. Eignet sich das Messgerät für den Einsatz im Freien oder in feuchten Bereichen? Durch den Schutzgrad IP 67 ist das Gerät gegen Staub geschützt und kann kurzfristigem Eindringen von Wasser widerstehen, weshalb es auch in feuchteren Fertigungsbereichen zuverlässig verwendet werden kann. Welche Messlängen deckt das Gerät ab und für welche Anwendungen ist das sinnvoll? Mit einem Messbereich von 0–2500 mm ist der Schieber für großformatige Bauteile geeignet und klassifiziert als Extra‑Lang; typische Einsätze finden sich im Rohr‑ und Behälterbau, Formenbau und der Schwerzerspanung. Wie gut lässt sich die Anzeige ablesen und wie hilft das in der Praxis? Die Swiss Electric Digitalanzeige mit 11 mm Ziffernhöhe bietet hohe Lesbarkeit, reduziert Ablesefehler und beschleunigt Messabläufe, was gerade bei Serienprüfungen Zeit spart. Ist das Gerät für präzise Laborprüfungen geeignet? Dank der Kalibrierung nach ISO 17025 und der Ablesung von 0,01 mm kann das Messgerät in vielen Prüfaufgaben eingesetzt werden; für submikrometergenaue Laboranwendungen sind jedoch spezialisierte Hochpräzisionssysteme empfehlenswert. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2500mm Precision Caliper Digital Color 2.4" Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of an extra‑long 2,500 mm measuring range, a colour 2.4" touchscreen and full ISO 17025 calibration for reliable, traceable inspections of large assemblies; order the digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Microtech Metrology digital caliper — extra‑long 2,500 mm range, colour 2.4" touchscreen The digital caliper is an extra‑long measurement instrument designed for large components and workshop integration, offering wireless and USB data transfer for streamlined inspection workflows. Extra‑long 2,500 mm measuring range Colour 2.4" touchscreen display Wireless and USB data output Delivered calibrated to ISO 17025 Aluminium frame with 600 mm jaw length Reliable measurement for large components An extra‑long range instrument provides the reach required for large flanges, housings and assemblies while preserving repeatability along the entire span. The instrument’s 2,500 mm measuring capability combined with a robust aluminium profile reduces bending and helps maintain alignment during long measurements. For production and quality control this means fewer measurement set‑ups and a lower risk of handling error, translating directly into time savings and consistent part acceptance. Fast integration and documented traceability Equipped with a colour 2.4" touchscreen and both Wireless and USB outputs, the caliper supports rapid data capture and plug‑and‑play connection to inspection software or data loggers. The tool is supplied fully calibrated according to ISO 17025, including a calibration certificate for traceable documentation. This combination shortens process chains, simplifies batch documentation and reduces manual transcription errors — a practical advantage for traceable quality records and audit requirements. Practical design for everyday workshop use The instrument balances reach and handling: a long jaw length of 600 mm provides access to recessed features while the lightweight aluminium construction keeps the device manageable on large parts. Controls are intuitive via the touchscreen, allowing operators to focus on measurement quality rather than menu navigation. Built for regular industrial use, the device supports efficient inspection routines and lower operator fatigue, which in turn helps reduce measurement variation over repetitive tasks. For reliable, large‑scale measurement and traceable results, contact Metav Werkzeuge to discuss the Microtech Metrology digital caliper (SKU 142125162) and arrange procurement or technical advice directly with our consultants. Technical data Article number: 142125162 GTIN: 4061905455667 Manufacturer: Microtech Metrology Core measurements Measuring range: 0–2,500 mm Resolution: 0.01 mm Display: Colour 2.4" touchscreen Jaw length: 600 mm Accuracy: 0.105 mm Special features Aluminium construction Wireless + USB data output Delivered calibrated to ISO 17025 Extra‑long range suitable for large components FAQ What measurement range does the caliper cover? The digital caliper covers a measuring range of 0–2,500 mm, making it suitable for large parts and assemblies (Microtech Metrology, SKU 142125162). Is the device delivered calibrated and traceable? Yes, the caliper is supplied fully calibrated to ISO 17025 and includes a calibration certificate for traceability and audit purposes. How can measurement data be transferred to inspection systems? Data transfer is available via Wireless and USB outputs; the colour touchscreen provides simple configuration for data export and integration. What material is the caliper made from and why does it matter? The frame is made from aluminium, which offers a favourable stiffness‑to‑weight ratio for long‑span measurements and easier handling on large components. Is this caliper suitable for routine workshop quality control? The combination of an extra‑long range, intuitive touchscreen and traceable ISO 17025 calibration makes it well suited for production quality control of large workpieces. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2500mm Wireless Digital Messschieber, 0,01mm, IP 67, Kalibriert nach ISO 17025 - Microtech Metrology
Der extra‑lange Messbereich und die robuste Schutzart in Kombination mit der ISO 17025‑Kalibrierung sichern reproduzierbare Messergebnisse für großformatige Bauteile. Nutzen Sie die drahtlose Datenübertragung und die klare Anzeige für effiziente Prozessanbindung. Bestellungen und Fachberatung erhalten Sie unkompliziert über Metav Werkzeuge oder per Anfrage an unsere Technikberatung. Microtech Metrology Messschieber (Digital, 0–2500 mm) Der Messschieber von Microtech Metrology misst zuverlässig bis 2,5 m und ist für großformatige Werkstücke in Industrie und Formenbau ausgelegt Microtech Metrology Messschieber Extra-Lang: Messbereich bis 2.500 mm Swiss electric Display 14 mm für klare Anzeige Wireless Datenausgang zur Prozessanbindung IP67 Schutz für staub- und wassergeschützten Einsatz Präzision für großformatige Messaufgaben mit reproduzierbarer Steifigkeit Der Schieber ist als Extra‑Lang‑Ausführung konzipiert und deckt einen Messbereich bis 0–2500 mm ab, wodurch er speziell für großformatige Bauteile wie Rohre, Gehäuse und Formplatten geeignet ist. Die Abmessung des Trägers und der Querschnitt von 53x8 Millimeter sorgen für ausreichende Profilsteifigkeit, damit Messungen über lange Längen reproduzierbar bleiben. Die lange Backengeometrie mit einer Schnabellänge von 300 Millimeter erleichtert die Aufnahme tiefliegender Messpunkte und reduziert wiederholte Justagen. Robuste Bauweise, klare Anzeige und nahtlose Datenanbindung Die Konstruktion ist auf Werkstattbedingungen ausgelegt: Mit IP67‑Schutzklasse bietet das Werkzeug Schutz gegen Staub und zeitweiliges Untertauchen, was den Einsatz in anspruchsvollen Fertigungsumgebungen ermöglicht. Das Swiss electric Display mit 14 Millimeter Zeichenhöhe gewährleistet gute Lesbarkeit auch bei ungünstigen Lichtverhältnissen. Für die digitale Prozessintegration steht ein Wireless‑Datenausgang zur Verfügung, der die Übertragung von Messwerten in Prüfprotokolle oder Messsoftware erleichtert und manuelle Erfassungsfehler reduziert. Messgenauigkeit, Ablesbarkeit und Kalibrierqualität für Qualitätssicherung Die Elektronik bietet eine Ablesung von 0,01 Millimeter, wodurch feinauflösende Messungen möglich sind; die im Datenbestand angegebene Genauigkeit liegt bei 0,09 Millimeter. Für Qualitätssicherungen relevant ist die werkseitige Auslieferung mit Kalibrierung: Das Gerät wird vollständig nach ISO 17025 kalibriert ausgeliefert und kommt mit entsprechendem Kalibrierzeugnis, sodass es sich direkt in Prüfmittel‑Management und Auditprozesse einfügen lässt. Einsatzfelder, Nutzerkreis und Integration in Produktionsabläufe Dieses Messgerät richtet sich an Anwender im Maschinen‑ und Metallbau, Vorrichtungs‑ und Formenbau sowie an Messlabore, die präzise Messungen an großen Bauteilen benötigen. Durch die Kombination aus großer Reichweite, robuster Bauweise und Wireless‑Schnittstelle eignet es sich für die Einbindung in kontinuierliche Prüfabläufe und Industrie‑4.0‑konforme Datenerfassung. Die praktische Handhabung bleibt erhalten, da die lange Bauform auf ergonomische Bedienung und einfache Positionierung ausgelegt ist. Für große Messaufgaben empfehlen wir den Einsatz des Microtech Metrology Messschiebers mit ISO 17025‑Kalibrierschein; Bestellungen und technische Beratung erhalten Sie direkt über Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 141073265 Marke: Microtech Metrology GTIN: 4061905454738 Messsystem: ABS Messbereich: 0-2500 mm Digitale Anzeige: Swiss electric Digit Höhe 14mm Fakten Ablesung: 0,01 mm Genauigkeit: 0,09 mm Messbereich Maximal: 2500 mm Schnabellänge: 300 mm Querschnitt: 53x8 mm Besonderheiten IP67: Staub- und Wasserschutz Datenausgang: Wireless ISO17025: Vollständig kalibriert, Kalibrierzeugnis Anzeige: Swiss electric Digit 14 mm Messsystem: ABS (Absolutmessung) FAQ Wird das Gerät kalibriert ausgeliefert? Der Microtech Metrology Messschieber (SKU 141073265) wird vollständig nach ISO 17025 kalibriert ausgeliefert; ein Kalibrierzeugnis liegt bei und erleichtert die Integration in auditierte Prüfprozesse. Für welche Anwendungen eignet sich dieses Messgerät am besten? Der Messschieber von Microtech Metrology ist für großformatige Messaufgaben konzipiert und eignet sich besonders für Rohr‑ und Behälterbau, Formenbau und Schwerzerspanung, wo lange Messbereiche und reproduzierbare Ergebnisse gefordert sind. Welche Messgenauigkeit und Auflösung bietet das Gerät? Das Gerät liefert eine Ablesung von 0,01 mm und weist die im Datenbestand genannte Genauigkeit von 0,09 mm auf; diese Kombination erlaubt feinauflösende Messungen bei robusten Industrieanwendungen. Wie werden Messdaten übertragen und weiterverarbeitet? Dank des Wireless‑Datenausgangs können Messwerte kabellos an Prüfsoftware oder Datenerfassungssysteme übergeben werden, was manuelle Übertragungsfehler vermeidet und die Produktivität in der Messkette erhöht. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
2500mm Workshop Caliper Long Jaw 300mm Probe Color 2.4" Touchscreen Wireless USB ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of extra‑long measuring range, traceable ISO 17025 calibration and integrated wireless + USB data transfer to keep large‑format inspection reliable and efficient; order the calibrated workshop caliper directly via Metav Werkzeuge or consult the Metav team for application advice. Werkstattmessschieber — Workshop caliper, extra‑long 2,500 mm range, 2.4" colour touchscreen (Microtech Metrology) Werkstattmessschieber is an extra‑long digital caliper designed for precise measurement of large components in heavy machining and fixture assembly. Extra‑long 2,500 mm measuring range ISO 17025 calibrated with certificate included Colour 2.4" touchscreen for clear readout Wireless and USB data export for quick integration Measure large assemblies without compromise The extra‑long design delivers a 2,500 mm measuring span while retaining usable rigidity for shop‑floor applications. Built for large flanges, housings and long shafts, this caliper combines a long 300 mm jaw profile with a controlled measuring force of 1–20 N, which reduces deflection and supports reproducible readings over extended lengths. The heavy‑duty concept brings repeatable accuracy to tasks that traditionally required staged measurements or multiple setups, improving throughput and reducing rework. Traceable calibration and workshop confidence Delivered fully calibrated to ISO 17025, the instrument includes a calibration certificate, ensuring measurements are traceable and audit‑ready. The calibrated status removes uncertainty from incoming inspection and production checks and supports quality systems that demand accredited evidence. Fine‑adjustment mechanics and handmade measuring jaws contribute to a consistently low systematic error, so measurement data can be relied on for decisions in quality control and process verification. Efficient data handling and ergonomic operation A 2.4" colour touchscreen provides rapid numeric and graphical feedback, while Wireless + USB outputs enable straightforward capture of measurement data into inspection software or spreadsheets. The fine‑adjustment mechanism permits smooth approach to contact; combined with the wide jaw length this supports faster set‑up and less handling time for oversized parts. Integration of digital output lowers transcription errors and speeds up reporting, making the caliper a practical tool for workshop teams and inspection stations alike. For calibrated large‑format measurement solutions from Microtech Metrology, contact Metav Werkzeuge in Emmerich to discuss delivery and documentation options. Technical data SKU: 141025256 GTIN: 4061905038815 Manufacturer: Microtech Metrology Facts Measuring range: 0–2,500 mm Jaw length: 300 mm Measuring force: 1–20 N Display: 2.4" colour touchscreen Resolution: 0.01 mm Special features ISO 17025 calibration and certificate included Wireless + USB data output Fine adjustment mechanism Handmade measuring jaws Digital readout FAQ Is the workshop caliper supplied with a calibration certificate? The Workshop caliper from Microtech Metrology is delivered fully calibrated to ISO 17025 and includes a calibration certificate. What is the usable measuring range and jaw length? The instrument covers 0–2,500 mm with extended jaws of 300 mm, intended for large components and assemblies. How is measurement data exported from the caliper? Data can be transmitted via Wireless connection or exported over USB for direct capture into inspection software. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250mm Digital Caliper Flat Jaws 75mm Lower/55mm Upper, Stainless Steel Housing, IP Not Specified - Metav IndustryLine
Take advantage of a balanced combination of 250 mm measuring range, hardened stainless steel construction and a clear digital display for consistent shop-floor throughput; order or request tailored advice via Metav Werkzeuge. Metav IndustryLine digital caliper M240.057 — 250 mm, flat gripping tips The Metav IndustryLine digital caliper M240.057 is a 250 mm range caliper designed for routine dimensional control in machines shops and fabrication environments, offering flat gripping tips for reliable contact on small and awkwardly shaped workpieces 250 mm measuring range for workshop use Hardened stainless steel construction, metal housing Digital display with On/Off, Zero, Unit, Hold Flat jaws 75/55 mm ideal for tight geometries Dependable everyday performance that reduces rework The instrument is classified as a Standard range caliper for general machine‑shop tasks and combines reach with rigidity: the 250 mm span gives access to typical components while the compact jaw geometry preserves stiffness. With a display resolution of 0.01 mm and a declared accuracy of ±0.04 mm, the device is suited to workshop quality control where reproducible results matter. The relatively light weight and balanced proportions make repeated checks less tiring and help maintain cycle times on production lines. Fast measurement capture and straightforward data handling A clear digital display provides immediate read‑out and the keypad offers On/Off, Zero, Unit and Hold functions for quick adaptation to different measuring routines. The caliper includes an RB 5 data output interface to feed recorded values into inspection software or a portable data logger, accelerating documentation and reducing transcription errors. Powered by a 3 V cell, the unit supports uninterrupted shifts with simple battery replacement, improving measurement throughput in repetitive tasks. Robust materials for repeatable accuracy Constructed from hardened stainless steel with a protective metal housing, the instrument resists everyday abrasion and maintains dimensional stability under shop conditions. Flat measuring tips of 75 mm (lower) and 55 mm (upper) ensure dependable contact on flats and shoulders, while the corrosion‑resistant surfaces reduce maintenance. The build quality supports stable calibration intervals and helps retain measurement certainty over time, which is vital for components that enter assembly or further machining. Practical features for common workshop operations Designed for internal measurements from 10 mm and general external checks, the caliper integrates into standard inspection routines without requiring elaborate setup. The combination of flat gripping tips and the compact display layout makes it easier to measure stepped geometries and shallow bores that are awkward for larger instruments. The balance of reach, resolution and robustness makes this a pragmatic choice for maintenance teams, toolrooms and production inspectors who prioritise speed and repeatability. Contact Metav Werkzeuge for application advice, detailed specifications or to discuss how the Metav IndustryLine digital caliper M240.057 fits existing inspection routines in your workshop. Technical data Article number: M240.057 GTIN: 4054469182292 Brand: Metav IndustryLine eClass: 21170344 Facts Measuring range: 0–250 mm Resolution: 0.01 mm Declared accuracy: ±0.04 mm Weight: 0.5 kg Lower jaw length: 75 mm Upper jaw length: 55 mm Power supply: 3 V battery Special features Material: hardened stainless steel, metal housing Digital display with On/Off, Zero, Unit, Hold buttons Data output: RB 5 interface Suitable for internal measurements from 10 mm FAQ What measurement range does this caliper cover? The Metav IndustryLine digital caliper M240.057 covers a measuring span of 0–250 mm, making it suitable for standard workshop and machine‑shop tasks. What resolution and accuracy can be expected? Resolution is 0.01 mm and the declared accuracy is ±0.04 mm for the Metav IndustryLine digital caliper M240.057, which supports reliable routine checks. Is the caliper suitable for internal measurements of small bores? The caliper is specified as suitable for internal measurements from 10 mm upwards; measurements below this size are not recommended with this model. Does the instrument support data transfer to inspection systems? Yes, the caliper offers an RB 5 data output interface to export measured values into compatible inspection software or data loggers. What materials and finishes are used in the construction? The device is made from hardened stainless steel with a metal housing, providing corrosion resistance and mechanical stability for repeated shop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Internal Groove Caliper 0.05mm Vernier Matt Chrome Inox Kasten - Metav IndustryLine
Taking advantage of a compact 30–250 mm measuring range and a precise 0.05 mm vernier scale, this analogue inside‑groove caliper delivers reliable measurements for everyday workshop and production use; order directly via Metav Werkzeuge or consult our specialists for application advice. Inside‑Groove Vernier Caliper M201.137 — 30–250 mm range, 0.05 mm vernier The Inside‑Groove Vernier Caliper M201.137 is an analogue precision caliper designed to measure internal grooves and narrow slots in metalworking, toolmaking and assembly tasks. 30–250 mm measuring range 0.05 mm vernier resolution Matt chrome, INOX stainless finish Locking screw for secure readings Dependable precision for routine inspection tasks The Inside‑Groove Vernier Caliper M201.137 combines a practical measuring span with a fine vernier scale for clear, reproducible readings. The 30–250 mm span places the tool in the standard caliper class, offering the best balance between reach and rigidity for general mechanical and metalworking tasks. The vernier 0.05 mm graduation provides workshop‑grade resolution while the stated accuracy 0.15 mm reflects the instrument’s role as a robust checking tool rather than a metrology‑lab instrument. As an analogue vernier, it requires no power source and is immediately ready at the bench, which minimises downtime in routine quality checks and set‑up inspections. Robust materials and ergonomic handling for repeatable results Constructed from INOX (stainless steel) with a matt chrome finish, the frame and jaws resist corrosion and retain a consistent slide action under regular shop conditions. The caliper is fitted with an integral locking screw to secure the slider during measurement transfer and to reduce reading error caused by transient movement. The measuring jaws feature an 80 mm effective length suited to reach into groove profiles while remaining stiff enough to avoid twist under normal hand pressure. These material and design choices support repeatable measurements and a long service life in production environments. Practical application in production and workshop workflows This inside‑groove caliper is particularly useful for checking groove widths, seat depths and narrow slot dimensions during assembly, small‑batch machining and first‑article inspections. Its analogue nature makes it straightforward to interpret on the shop floor: the 0.05 mm scale allows quick conformity checks and the simple construction reduces the need for frequent recalibration. The tool integrates well with standard quality control routines where rapid verification and clear pass/fail decisions speed up throughput. For traceable metrology requirements, the caliper serves as a robust reference instrument within a broader inspection process. For purchase guidance or application support for the Metav IndustryLine inside‑groove caliper, please contact Metav Werkzeuge for tailored advice and delivery from Emmerich. Technical data SKU: M201.137 GTIN: 4054469100685 Eclass: 21170344 Tariff number: 90173000 Manufacturer: Metav IndustryLine Numbers / Core technical data Measuring range: 30–250 mm Resolution (vernier): 0.05 mm Accuracy: 0.15 mm Jaw length: 80 mm Materials / Special features Material: INOX (stainless steel) Finish: matt chrome Type: Analogue vernier caliper (inside‑groove) Locking screw fitted FAQ How is the measuring range classified for this caliper? The inside‑groove caliper has a 30–250 mm range, classifying it as a standard workshop caliper suitable for general machine‑shop and metalworking tasks. What reading resolution and practical accuracy can be expected? The instrument provides a 0.05 mm vernier resolution; the specified operational accuracy is 0.15 mm, consistent with robust shop‑floor use. Is the caliper suitable for corrosive environments? The caliper is made of INOX (stainless steel) with a matt chrome finish, which improves resistance to corrosion under normal workshop conditions. Can this caliper measure narrow internal grooves effectively? Yes. The jaw geometry and 80 mm effective jaw length are designed to access and assess internal grooves and narrow slots reliably. Who manufactures the product and what is the SKU? The product is offered under Metav IndustryLine; the SKU is M201.137 and the GTIN is 4054469100685. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Outer Measuring Jaw For Digital Carbon Fibre Caliper, For 8mm Jaw Thickness - Metav IndustryLine
Take advantage of the combination of lightweight construction and precise contact geometry for dependable external measurements; compatibility with standard digital universal calipers ensures straightforward workshop integration. Order the accessory via Metav Werkzeuge or consult our specialists for application-specific advice. M217.364.3 — Carbon-fibre external measurement jaw for digital universal calipers (8 mm jaw thickness) — Metav IndustryLine The M217.364.3 is a purpose-built external-measurement jaw intended for digital universal calipers, combining low thermal expansion and robust contact geometry to support consistent dimensional control in workshop and production environments. Carbon fibre construction for low thermal drift Designed for digital universal calipers Compatible with 8 mm jaw thickness Lightweight: only 0.2 kg for easy handling Precise external measurement with reduced thermal influence The carbon-fibre construction delivers a low thermal expansion coefficient and a high stiffness‑to‑weight ratio, which together improve measurement repeatability during temperature changes common in production halls. Fitted to a caliper head, the accessory preserves the instrument’s metrology characteristics while reducing operator‑induced variability. The combination of precision contact surfaces and minimal mass means less inertia during handling, contributing to faster, more reliable checks in serial processes. Smooth integration into digital caliper workflows Designed for compatibility with digital universal calipers, the jaw attaches to calipers with a jaw thickness of 8 mm, allowing quick retrofitting without modification of existing measuring equipment. This adaptability reduces downtime and simplifies tool management in the workshop, supporting lean measurement routines and faster cycle times. The lightweight design also lessens operator fatigue during repetitive checks, so throughput and consistency improve with minimal process change. Robust design for everyday workshop reliability While optimised for external measuring tasks, the jaw’s geometry and materials handle frequent handling and typical workshop conditions without compromising contact accuracy. The compact width and engineered contact faces help protect the mating surfaces against deformation, ensuring sustained repeatability over many inspection cycles. Backed by Metav’s quality approach and logistics in Emmerich, the accessory forms part of a pragmatic system that brings industrial‑grade measurement closer to everyday workshop use. Contact Metav Werkzeuge to discuss fitting options for the Metav IndustryLine M217.364.3 and to confirm compatibility with existing calipers Technical data SKU: M217.364.3 Manufacturer: Metav IndustryLine Material: Carbon fibre Suitable for calipers with jaw thickness: 8 mm Application: External and internal measurement Key numbers Width: 16 mm Weight: 0.2 kg Measurement range (as labelled): 0‑X/20‑X Special features Designed for digital universal calipers Low thermal expansion for stable results Lightweight for reduced operator fatigue Engineered contact geometry for repeatability FAQ Which calipers are compatible with this jaw? The M217.364.3 from Metav IndustryLine is designed for use with digital universal calipers that accept a jaw thickness of 8 mm; confirmation of the caliper jaw profile is recommended before fitting. Can this jaw be used for internal measurements as well as external ones? Although intended primarily as an external‑measurement accessory, the jaw’s geometry allows adaptability to related tasks; the M217.364.3 performs best when mounted on calipers configured for the specific measurement type. How does the carbon‑fibre construction benefit shop measurements? Carbon fibre offers low thermal expansion and high stiffness at low mass, so the M217.364.3 helps maintain measurement stability during temperature fluctuations and reduces handling inertia for more consistent readings. What is the handling weight and why does it matter? At approximately 0.2 kg, the accessory is lightweight, which reduces operator strain during repetitive checks and contributes to faster, steadier measurement cycles. Is the accessory suitable for heavy production use? The accessory is crafted for regular workshop and production environments; its contact geometry and material choice are intended to provide durable, repeatable performance under normal operating conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Precision Caliper Workshop Jawless, Fine Adjustment, Hardened Stainless Steel, For External, Internal And Step Measurements, Delivered In Case - Metav IndustryLine
Take advantage of workshop-grade durability and clear vernier accuracy: the combination of a hardened stainless steel body, fine-adjustment thumbwheel and vernier resolution to 0.02 mm keeps routine measurements efficient and reproducible. Order directly via Metav Werkzeuge or consult our specialists for application advice and supply from Emmerich. Workshop precision caliper M201.311 — 250 mm, hardened stainless steel, fine adjustment (Metav IndustryLine) The Workshop precision caliper M201.311 is an analogue 250 mm precision caliper designed for general workshop measurement tasks including outside, inside and step dimensions Fine-adjustment thumbwheel for smooth setting Hardened stainless steel with matt-chromed scale Vernier reading to 0.02 mm for precise measurement Measures outside, inside and step dimensions Precision where range and repeatability matter This caliper belongs to the Standard class with a measuring span of 0–250 mm, offering the everyday reach required in machine and metal workshops. The mechanical vernier provides a reading step equivalent to 0.02 mm, supported by the dual-scale arrangement (1/1000" upper, 1/50 mm lower) so operators familiar with traditional instruments can read metric and imperial cues. The instrument is intended for repeatable dimensional checks on components, fixturing and routine quality control where robust, easy-to-verify readings are preferred over digital dependency. Built for longevity and controlled handling Constructed from hardened stainless steel with a matt-chromed scale, the caliper resists corrosion and keeps graduations legible in daily shop conditions. A monoblock frame reduces play and maintains jaw alignment over time, while the fine adjustment mechanism allows precise approach to the measurement before final reading, reducing risk of overshoot and inconsistent contact force. Together these features deliver a low-maintenance measuring tool that stays serviceable through regular use and rougher handling typical of workshop environments. Practical use and interpretation for everyday tasks The instrument covers the common measuring functions — outside, inside and step measurement — using a single, compact tool that fits comfortably in the toolbox. Reading the vernier is straightforward: align the scales and take the vernier value to the nearest 0.02 mm increment for a reliable mechanical reading. Supplied to factory standard (Werksnorm), the caliper is ready for bench use in production or maintenance; routine care—cleaning, light lubrication and careful storage—keeps accuracy consistent and extends service life. For applications requiring certificate-backed calibration, please query calibration options prior to purchase. For reliable workshop measurement choose the Metav IndustryLine caliper M201.311 — contact Metav Werkzeuge for personalised advice and supply from Emmerich Technical data Article number: M201.311 GTIN: 4054469101316 Category: Precision caliper (Messschieber) Numbers / Facts Measuring range: 0–250 mm Resolution / reading step: 0.02 mm Vernier scales: 1/1000" (upper), 1/50 mm (lower) Jaw length: 80 mm Special features / Versions Material: hardened stainless steel, matt-chromed scale Construction: monoblock frame Measurement functions: outside, inside, step Adjustment: fine-adjustment thumbwheel Display type: analogue vernier Standard: Werksnorm FAQ How fine is the reading on this caliper and how is it presented? The Workshop precision caliper M201.311 offers a vernier resolution of 0.02 mm, displayed on a dual vernier (1/1000" and 1/50 mm) so metric readings to 0.02 mm are straightforward to obtain. Is the caliper suitable for a busy metal workshop environment? Yes, the M201.311 is built from hardened stainless steel with a matt‑chromed scale and a monoblock frame, designed for robust everyday workshop use. Which measurement types can be performed with this tool? The caliper performs outside, inside and step measurements, making it suitable for component checks, fixture setup and routine assembly inspections. Does the instrument come calibrated to an international standard? The caliper is supplied to factory standard (Werksnorm). If an accredited calibration certificate is required, please enquire before purchase to discuss available calibration services. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Werkstatt-Messschieber, 0,05mm, Werksnorm - Metav IndustryLine
Die ausgezeichneten Bewertungen von Metav Werkzeuge stehen für 42.000 erfreute Kunden. Überzeuge Dich selbst und bestelle bei metav-shop.de! Sicher entscheiden mit 250mm Der Messbereich bis 250mm bringt die nötige Reichweite für typische Bauteile auf den Punkt. Prüfungen gelingen direkt am Werkstück, auch wenn Formen variieren. Im allgemeinen Maschinen- und Metallbau sorgt dieser Bereich für eine sichere Orientierung über den gesamten Prozess. Die Ergebnisse bleiben nachvollziehbar und konsistent. Das reduziert Nacharbeit und unterstützt saubere Übergaben zwischen Arbeitsschritten. Wir haben uns Gedanken gemacht, wie wir die einzelnen Messbereiche der Messschieber Klassifizieren können. Klassifizierung Messbereiche beim Messschieber.. Direkt auf das Audit vorbereitet durch Fertigung nach Werksnorm Unser Werkstatt-Messschieber Metav IndustryLine wird vollständig nach den einschlägigen DIN-Normen gefertigt – sämtliche Materialien, Fertigungs- und Kalibrierverfahren entsprechen den Anforderungen der Werksnorm. Damit sind Maßhaltigkeit und Wiederholgenauigkeit garantiert, Prüfzertifikate sind international kompatibel, und Audits oder Kundenfreigaben lassen sich deutlich schneller durchlaufen. Die DIN-Konformität sichert konstante Qualität, erleichtert die weltweite Einsetzbarkeit und stärkt das Vertrauen in jedes einzelne Messergebnis. Expertenhinweis: Reinige regelmäßig Deine Messwerkzeuge. Damit stellst Du sicher, das Dein Messwerkzeug lange erhalten bleibt. Sie sind unsicher, ob das Werkzeug für Ihre Anwendung geeignet ist? Oder benötigen Sie weitere technische Informationen? Kein Problem – sprechen Sie uns gerne an! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Telefon: +49 2822 7131930 Informationen zur technischen Ausstattung zumWerkstatt-Messschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber leichte Ausführung Bestellnummer: M201.371 Zahlen: Messbereich: 0 bis 250mm Gewicht: 0,7kg Norm: Werksnorm Schnabellänge: 80mm Ablesung: 0,05mm Ablesung in Inch/Zoll: 1/128 Besonderheiten Ausführung: analog Material: rostfreier Stahl, Skala und Nonius mattverchromt leichte Ausführung Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Worauf Käufer eines Messschiebers achten sollten: Neben den zentralen Faktoren Genauigkeit und Messbereich gewinnen auch komplette Funktionen wie der Datenausgang oder die Überwachung der Messkraft zunehmend an Bedeutung. Der Gebrauch eines Messschiebers mit präzise abgestimmter Messkraft erweist sich insbesondere im Bereich der Qualitätssicherung und innerhalb von Laboren als vorteilhaft. Man sollte auch berücksichtigen, ob der ausgewählte Messschieber kalibriert werden muss. Man kann die Kalibrierung bei Lieferung vornehmen und aus Gründen der Prozesskontinuität alle 12 Monate erneuern. Pflegehinweis - damit Sie lange etwas von Ihrem Werkstatt-Messschieber von Metav IndustryLine haben: Werkstatt-Messschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
250mm Workshop Caliper With Point 0.05mm Vernier, Stainless Steel, DIN 862 - Metav IndustryLine
Robust stainless‑steel construction, a 0–250 mm measuring range and a 0.05 mm vernier resolution deliver reliable workshop metrology; order the Workshop caliper M201.394 directly via Metav Werkzeuge or consult our specialists for application advice. Workshop caliper M201.394 — 250 mm analogue caliper with pointed jaws (Metav IndustryLine) The Workshop caliper M201.394 is an analogue stainless‑steel measuring instrument designed for routine workshop measurement tasks, combining a durable matt‑chrome finish with a precise 0.05 mm vernier for consistent, repeatable readings. Analogue vernier with 0.05 mm reading Stainless steel body, matt chrome scale Pointed jaw design for tight access Conforms to DIN 862 workshop standard Dependable precision for everyday metrology The instrument is built around a classic analogue vernier system that provides a clear 0.05 mm reading, matching the typical industrial standard for mechanical calipers. Its 0–250 mm measuring range places it in the Standard class for workshop use, balancing reach and stiffness for the most common machine‑shop tasks. The matt‑chrome scale and vernier are specified to resist glare and wear, helping to keep measurements verifiable over time while the stainless‑steel construction reduces surface corrosion and extends service life. Practical jaw geometry and handling advantages A pointed jaw profile with lengths of 80/40 mm enables measurement in confined or recessed areas where blunt jaws struggle. The compact jaw geometry improves access without sacrificing stability, while an overall weight of approximately 0.8 kg gives a reassuring feel in the hand and reduces oscillation during measurement. Ergonomic thumb‑slide control and a finely machined vernier make frequent use efficient and reduce operator fatigue, resulting in quicker throughput and fewer repeat checks on production lines. Conformance, suitability and workshop benefits Manufactured to DIN 862, this workshop caliper supports established quality workflows and is suitable for routine dimensional checks, fixture set‑up and incoming inspection. The analogue design offers robustness in harsher shop environments where electronic displays might be vulnerable; spare parts and maintenance are straightforward and familiar to most technicians. As a tool for general mechanical and metal‑working applications, the instrument provides a pragmatic combination of durability, readability and long‑term reliability. For specialist advice or to secure the Workshop caliper M201.394 for a production or maintenance setup, contact Metav Werkzeuge and benefit from expert guidance and reliable supply from Emmerich. Technical data SKU: M201.394 GTIN: 4054469102139 ECLASS: 21170344 Type: analogue vernier caliper Standard: DIN 862 Facts Measuring range: 0–250 mm Resolution: 0.05 mm Jaw lengths: 80/40 mm Weight: 0.8 kg Tariff number: 90173000 Special features Material: stainless steel; scale & vernier matt chrome Pointed jaw design for confined access Analogue vernier reading, robust workshop use Brand: Metav IndustryLine FAQ What measuring range does the caliper cover? The Workshop caliper M201.394 covers a measuring range of 0–250 mm, making it suitable for standard workshop tasks and general metalworking measurements. How fine is the vernier reading on this caliper? The instrument provides a 0.05 mm vernier resolution, consistent with common industrial mechanical calipers and ideal for routine dimensional checks. Is the caliper corrosion‑resistant? Yes. The caliper is made from stainless steel and fitted with a matt‑chrome scale and vernier to reduce corrosion and surface wear in workshop conditions. Which standard does the caliper conform to? The caliper is manufactured in accordance with DIN 862, ensuring compatibility with standard workshop metrology procedures. Are the jaw dimensions suitable for tight spaces? The pointed jaw geometry, with 80/40 mm jaw lengths, is designed to access recessed features and confined measuring points commonly encountered in fixture and component inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Workshop Caliper With Pointed Jaws 0.05mm Vernier, Fine Adjustment, Monoblock, Hardened Stainless Steel, Case - Metav IndustryLine
A workshop caliper that pairs a hardened stainless-steel monoblock frame with a fine-adjustment screw and precise vernier scales, providing reliable 0.05 mm readings for standard shop measurement tasks. Order the caliper directly via Metav Werkzeuge or ask our consultants for tailored advice. M201.330.1 Workshop caliper — stainless steel, 250 mm, fine adjustment (Metav IndustryLine) M201.330.1 is a compact workshop caliper designed for everyday measurement tasks in machine shops and maintenance departments, combining robust construction with precise manual setting for repeatable results. Hardened stainless-steel monoblock design Fine-adjustment screw for precise setting Dual vernier: 1/128" and 1/20 mm scales Delivered in protective case for transport Robust construction for consistent workshop use The caliper features a hardened stainless-steel body in a monoblock design that reduces flex and improves stability during measurement. The matt-chromed scale improves contrast and reduces glare under workshop lighting, so readings remain clear. With an 80 mm jaw length and a 250 mm measuring range, this instrument sits in the standard caliper class — the best compromise between reach and rigidity for routine machine‑shop tasks. The choice of a single-piece frame and hardened material translates into fewer readjustments and longer service life under daily use. Precise reading and controlled setting for repeatable results Equipped with a dual vernier layout (top: 1/128"; bottom: 1/20 mm) the instrument gives straightforward, mechanical readings with a resolution of 0.05 mm, matching familiar workshop tolerances. The built-in fine-adjustment screw enables gentle, controlled travel of the slider to set measurements without overshoot, which improves repeatability when serial-checking parts. The vernier system follows recognised mechanical standards and is easy to interpret even for technicians who prefer analogue indicators over digital displays. Practical handling and safe transport included Pointed jaws provide access to narrow features and grooves where standard flat jaws struggle, while the monoblock profile aids hand-held stability during one-person measurements. The tool is supplied in a protective case to safeguard the caliper during transport and storage, particularly useful when moving between workstations or taking the instrument off-site. Conformity information: the product adheres to DIN 862 requirements for the applicable jaw length ranges, with factory standards applied where noted for the 250 mm variant. For robust, workshop-grade measurement with Metav IndustryLine reliability, contact Metav Werkzeuge in Emmerich for order support or technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M201.330.1 GTIN: 4054469101644 Category: Messschieber Material: stainless steel, hardened, matt-chromed scale Facts Measuring range: 0–250 mm Resolution: 0.05 mm Jaw length: 80 mm Vernier: 1/128" (top) and 1/20 mm (bottom) Analog vernier caliper Special features Monoblock construction Fine-adjustment screw Pointed jaws for narrow features Protective case included Norm: DIN 862 for applicable jaw lengths FAQ What measuring range does the caliper cover? The M201.330.1 workshop caliper covers 0–250 mm, placing it in the standard caliper class for general machine‑shop and metalworking tasks. What resolution and reading accuracy can be expected? Readings are given via the vernier with a resolution of 0.05 mm; the analogue layout provides reliable mechanical indications suitable for routine workshop control. Are the jaws suitable for narrow grooves and small features? Yes, the caliper is fitted with pointed jaws that facilitate access to grooves and tight features where flat jaws would be impractical. Is the instrument protected for transport and storage? The caliper is supplied in a protective case to protect the instrument during transport between workstations or when stored in a toolbox. Does the caliper meet recognised standards? The instrument is produced with reference to DIN 862 for the applicable jaw lengths; for the 250 mm variant the stated factory norms apply. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Workshop Caliper Without Point 0.05mm Resolution Matt Chrome Scale, DIN 862 - Metav IndustryLine
Take advantage of a workshop‑ready vernier that combines robust stainless‑steel construction and a 0.05 mm resolution for reliable daily measuring tasks; order the caliper directly via Metav Werkzeuge or consult our advisors for application guidance and delivery options. M201.391 Workshop Caliper (250 mm) — stainless steel, vernier 0.05 mm The M201.391 Workshop Caliper is a durable, analogue vernier caliper designed for general workshop and metalworking measurements up to 250 mm, compliant with DIN 862 and suited to standard machine‑shop applications. Stainless-steel construction, matt-chromed scale Vernier resolution 0.05 mm for workshop tasks 250 mm measuring range, DIN 862 standard 80 mm inside jaw for reliable internal measurements Industrial standard accuracy for everyday measurement tasks This vernier instrument delivers dependable, repeatable readings thanks to its 0.05 mm resolution and mechanical vernier scale. Classified in the Standard (100–300 mm) range, the tool balances measuring reach with stiffness and one‑hand usability — the nominal workshop lengths such as 250 mm offer an optimal compromise between accessibility and rigidity for routine checks on machined parts. Conformity to DIN 862 provides a clear, objective basis for quality control decisions and helps integrate the tool into existing inspection routines without uncertainty. Resilient materials and pragmatic geometry reduce downtime Constructed from stainless steel with a matt‑chromed scale and vernier, the gauge resists corrosion and maintains legibility in a busy shop environment. The 80 mm jaw length gives secure clamping on internal features while the flat, robust beam ensures stable guidance during repeated use. These design choices reduce wear and measurement variation, supporting a smoother production flow and fewer re‑measurements — an efficiency argument that pays off across shift cycles. Straightforward handling that keeps processes moving The analogue vernier format provides an immediate, power‑free reading, aided by an inch equivalence of 1/128 for mixed‑unit workflows. The caliper’s compact geometry and clear scale promote quick inspection steps at the bench or on the machine, helping to shorten setup times and maintain throughput. Alongside technical reliability, the tool offers practical benefits in everyday use: predictable behaviour under mechanical stress, easy cleaning, and compatibility with standard workshop procedures. Contact Metav Werkzeuge today to secure the M201.391 Workshop Caliper from our Emmerich stock — technical advisors are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to confirm suitability and shipping options Technical data Article number: M201.391 GTIN: 4054469102092 ECLASS: 21170344 Standard: DIN 862 Material: stainless steel; scale and vernier matt‑chromed Measuring range: 0–250 mm Resolution: 0.05 mm (1/128 inch) Type: Analog vernier caliper Jaw length: 80 mm Tariff code: 90173000 Facts Measuring range max: 250 mm Resolution: 0.05 mm Inch scale: 1/128 Jaw length: 80 mm Conforms to: DIN 862 Special features Stainless‑steel construction for corrosion resistance Matt‑chromed scale and vernier for improved contrast Analogue vernier reading — no batteries required Workshop classification: Standard (100–300 mm) FAQ What accuracy can be expected from this caliper? The M201.391 Workshop Caliper offers a vernier resolution of 0.05 mm and meets the tolerance expectations for standard mechanical vernier calipers under DIN 862. Is the caliper suitable for mixed metric and imperial work? Yes, the tool includes an inch division of 1/128, making the caliper suitable for occasional imperial measurements alongside metric work. What material is the caliper made from and how durable is it? The caliper is manufactured from stainless steel with a matt‑chromed scale and vernier, providing durable corrosion resistance for workshop environments. For which workshop tasks is this caliper best suited? Designed as a general workshop gauge, the M201.391 is ideal for everyday external and internal checks, quick setup verifications and routine component inspections up to 250 mm. Does the caliper require power or digital interfaces? This is an analogue vernier caliper and operates without batteries or digital output, offering immediate readings and low maintenance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Workshop Precision Caliper Without Probe Fine Adjustment Stainless Steel Matt Chrome Scale - Metav IndustryLine
Compact, rigid and workshop-ready: a 250 mm monoblock vernier caliper in hardened stainless steel with a fine-adjustment thumb screw for repeatable positioning. Take advantage of precise analogue reading and durable construction for reliable day-to-day measurements; order the M201.320.1 workshop caliper directly via Metav Werkzeuge or ask our consultants if needed. M201.320.1 workshop caliper — analogue 250 mm vernier, hardened stainless steel (Metav IndustryLine) A M201.320.1 workshop caliper designed for general metalworking and workshop measurement tasks; analogue vernier with fine adjustment and an 80 mm jaw for versatile handling Hardened stainless steel construction 250 mm measuring range, workshop standard Fine-adjustment thumb screw for precise positioning Supplied in protective case for transport Precision and durability that suit everyday workshop demands The caliper combines a 250 mm measuring range with a monoblock frame to deliver a robust balance of reach and stiffness. The body is made of hardened stainless steel, which resists corrosion and keeps wear to a minimum under regular workshop use. The integrated fine-adjustment mechanism ensures that sliding is smooth and that the jaw can be micro-positioned before a reading is taken, reducing measurement scatter and improving throughput on repetitive tasks. Clear, analogue vernier with industry-standard resolution This analogue instrument uses a double vernier arrangement; the lower vernier corresponds to a common 1/20 mm graduation, giving an effective reading step of 0.05 mm, while the upper markings follow inch subdivisions. The scale is matt-chromed to reduce reflections and support fast, reliable readings under workshop lighting. Compliance is provided according to DIN 862 for jaw lengths up to 200 mm; the 250 mm configuration is produced to factory standard to maintain consistent geometry across the full measuring range. Practical jaw geometry and handling for varied measuring tasks An 80 mm jaw length improves access into recesses and supports stable clamping of larger external profiles. The tool is suitable for routine external, internal and step measurements commonly encountered in machining and assembly. The fine-adjustment thumb screw makes single-handed setting easier, while the monoblock design increases resistance to bending and torsion—benefits that translate directly into lower rework rates and fewer measurement-related interruptions on the shop floor. Built to integrate with workshop routines and supply chains Delivered in a protective case for safe transport and storage, the instrument is engineered as a workshop staple rather than a delicate lab item. As part of the Metav IndustryLine, the unit benefits from Metav’s quality filtering and supply-chain reliability based in Emmerich, which supports rapid replenishment and consistent product specification. Choosing this caliper reduces the need for frequent replacements and helps standardise measurement practice across a workgroup or production line. Contact Metav Werkzeuge for tailored procurement advice and fast delivery from Emmerich — our consultants will match the caliper to workshop needs and ensure prompt supply. Technical Data Article number: M201.320.1 GTIN: 4054469101415 ECLASS: 21170344 Material: hardened stainless steel, matt-chromed scale Measuring range: 0–250 mm Jaw length: 80 mm Nonius/vernier: 1/128" (top) and 1/20 mm (bottom) Norm: DIN 862 (up to 200 mm jaw length), factory standard for 250 mm Monoblock construction: yes Fine adjustment: yes Supplied in case: yes Facts Measuring range (mm): 0–250 Jaw length (mm): 80 Vernier resolution: 0.05 mm (from 1/20 mm vernier) Article number: M201.320.1 GTIN: 4054469101415 Special features Hardened stainless steel construction Matt-chromed scale for low-reflection reading Monoblock frame for enhanced stiffness Fine-adjustment thumb screw for repeatable positioning Supplied in protective transport case Analogue vernier layout suitable for imperial and metric reading FAQ How accurate is the M201.320.1 workshop caliper? The caliper provides an effective vernier resolution of 0.05 mm from the 1/20 mm scale; accuracy follows workshop-vernier expectations under correct measuring technique and handling. Is the caliper suitable for a machine shop environment? Yes. The hardened stainless steel body and monoblock design make the M201.320.1 robust enough for daily use in machining and metalworking environments. Does the tool come with a protective case and documentation? The caliper is supplied in a protective case for transport; standard delivery includes the tool and its packaging as described in the technical data. Which standards apply to this caliper? The unit is produced to conform with DIN 862 for jaw lengths up to 200 mm; the 250 mm variant is manufactured to factory standard to preserve geometry and functionality. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250x90x20mm Wooden Case With Foam Insert For Calipers Suitable For Up To 200mm - Metav IndustryLine
Take advantage of a compact, protective storage solution that combines a wooden housing with a foam insert and precise internal dimensions; ideal for keeping a 200 mm caliper safe during transport and storage. Order or request advice directly via Metav Werkzeuge for reliable delivery and application support. Wooden case 250 x 90 x 20 mm for caliper — wooden protective case with foam insert, fits calipers up to 200 mm (Metav IndustryLine) Wooden case 250 x 90 x 20 mm for caliper provides a robust, low-profile solution for storing and transporting precision measuring tools in workshops and inspection areas Robust wooden housing with foam insert Fits calipers up to 200 mm Compact 250 x 90 x 20 mm footprint Protects measuring tools with compact, workshop-ready design The wooden case combines a solid housing and a shaped foam insert to reduce shock and abrasion during handling. With internal dimensions matching the external form factor, the case secures the instrument and limits movement that could otherwise stress sensitive jaws or affect long‑term accuracy. This protection is especially relevant where instruments are moved between benches, machines and service vehicles; the compact profile keeps the caliper accessible without occupying valuable bench space. Suited to the standard caliper range for everyday engineering tasks Designed for calipers classified in the standard range (100–300 mm), this case is tailored to the most common workshop instruments — notably devices with a measuring length up to 200 mm. That classification balances reach and stiffness in measurement tools, so storing the instrument correctly helps maintain repeatability and reduces the risk of damage that would otherwise lead to costly recalibration. The case therefore supports operational efficiency by prolonging service intervals and preserving measurement reliability. Clear, functional materials for durable, low-maintenance storage Constructed from wood with foam insert, the case uses simple, repairable materials that are easy to inspect and replace if necessary. The wooden shell offers dimensional stability and a tactile, traditional finish, while the foam contours cradle the caliper to prevent scratches and concentrated loads. The overall compact dimensions (250 x 90 x 20 mm) mean the case fits tool drawers, inspection boxes and tool trolleys without obstructing other equipment, making it a practical accessory for busy production environments. Practical advantages that support shop-floor workflows Beyond protection, the case simplifies organisation: identical cases can be stacked or labelled to keep sets together, reducing search times and protecting calibration certificates and accessories alongside the measuring instrument. The design complements routine quality processes by keeping the instrument in a controlled, repeatable state between uses, which contributes to consistent measurement practice and fewer workflow interruptions. Choose the Metav IndustryLine wooden case for secure, space‑efficient storage of precision calipers — contact Metav Werkzeuge for purchase or technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M836.455 Dimensions: 250 x 90 x 20 mm Suitable for: calipers up to 200 mm Facts Material: wood with foam insert External footprint: 250 x 90 x 20 mm Intended range: standard calipers (100–300 mm) Special features Protective foam inlay Low-profile wooden housing Compact storage for workshop and transport FAQ Is this case suitable for digital and analogue calipers? This wooden case is suitable for both digital and analogue calipers up to 200 mm and protects the instrument regardless of display type. Will the case preserve calibration of the caliper? While the case does not replace formal calibration, the foam inlay and stable wooden shell reduce mechanical shocks and handling stresses that can affect calibration stability. Can accessories or certificates be stored inside the case? Yes, there is space to include small items such as a spare battery or the caliper’s calibration certificate alongside the instrument. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Depth Gauge With Round 2.5mm Probe, Auto Power-Off, 0.01mm Resolution - Metav IndustryLine
Take advantage of a compact, workshop‑ready design with a 0–25 mm measuring range and a Ø 2.5 mm round probe for accessible bore measurement; the integrated automatic switch‑off conserves the 3 V battery. Order the Digital depth gauge M218.091 directly via Metav Werkzeuge or ask our consultants if technical advice is needed. Digital depth gauge M218.091 – 0–25 mm, Ø 2.5 mm round probe (Metav IndustryLine) The Digital depth gauge M218.091 is a compact, battery‑powered instrument for precise depth measurement tasks in small‑part inspection and workshop use. Digital display with mm/inch and ABS function Automatic power-off to conserve battery Round Ø 2.5 mm depth probe for small bores Compact 0–25 mm range with 53 mm bridge Precise, compact depth measurement for fine tasks The instrument combines a clear digital display with a standard resolution of 0.01 mm and a stated accuracy of ±0.05 mm, making it suitable for routine workshop checks and quality control where repeatable results are required. The 0–25 mm measuring range places the device in the micro category for measuring tools, which is ideal for fine‑mechanical work and components with limited access. The round Ø 2.5 mm depth probe provides entry to narrow bores and recesses, while the 53 mm bridge supports stable alignment during measurement. The electronics include mm/inch, ABS and zero functions to facilitate quick conversion and reference setting. Lightweight handling and access to confined features Made from robust plastic, the gauge is deliberately lightweight at 0.35 kg, easing one‑handed operation and reducing operator fatigue during repetitive checks. The curved measuring faces and the small‑diameter probe permit measurements in confined cavities and stepped features without the need for additional fixtures. The compact dimensions and ergonomic form mean faster set‑up times on the shop floor and simpler handling for bench and assembly tasks. Where space is limited, the rounded probe and short measuring range enable accurate depth readings without overextending the instrument. Efficient operation, low running costs and dependable results Operation is straightforward thanks to a dedicated ON/OFF key and an automatic switch‑off that extends battery life; the gauge runs from a 3 V battery that is easy to replace. The ABS mode locks the reading to prevent drift when repositioning, saving time during comparative measurements. Routine cleaning of the measuring faces and careful handling of the probe maintain measurement quality; abrasive cleaning agents should be avoided to protect surfaces. Backed by Metav’s approach to accessible precision, the instrument offers a reliable combination of usability and measured performance for workshops and inspection stations. Contact Metav Werkzeuge for a tailored quotation or technical advice on the Metav IndustryLine M218.091; our Emmerich team is ready by e‑mail or phone. Technical data Article number: M218.091 GTIN: 4054469181431 Brand: Metav IndustryLine Facts Measuring range: 0–25 mm Resolution: 0.01 mm Accuracy: ±0.05 mm Bridge length: 53 mm Weight: 0.35 kg Special features Material: plastic Measuring faces: curved Measuring tip: Ø 2.5 mm round probe Power supply: 3 V battery Display functions: ON/OFF, ZERO, mm/inch, ABS Extra: automatic switch‑off FAQ What is the measuring range of this depth gauge? The Digital depth gauge M218.091 measures from 0 to 25 mm, classifying it in the micro range for fine‑mechanical and small‑part work. How accurate and precise are the readings? Readings are displayed with 0.01 mm resolution and the instrument specification lists an accuracy of ±0.05 mm for routine inspection tasks. Can the gauge measure inside small bores? Yes. The Ø 2.5 mm round probe is designed to access narrow bores and recesses for reliable depth checks with the Metav IndustryLine gauge. What functions are available on the digital display? The unit includes ON/OFF, ZERO, mm/inch conversion and ABS mode to lock reference readings, simplifying comparative and multi‑step measurements. Is the gauge suitable for repetitive workshop use? The lightweight plastic construction and automatic switch‑off make the gauge practical for frequent use; regular cleaning of the measuring faces is advised to ensure consistent results. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital-Messschieber, 0,001mm Auflösung, IP 67 - Microtech Metrology
Präzise Kontrolle, Schutz und kompakte Bauform: Ideal für feinmechanische Messaufgaben mit hoher Auflösung. Nutzen Sie die Kombination aus hoher Messgenauigkeit, robuster Schutzart und handlicher Bauweise für verlässliche Prüfabläufe. Bestellen Sie den Messschieber direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Messschieber von Microtech Metrology — Digitaler Präzisions‑Schieber Der Messschieber ermöglicht hochauflösende Längenmessungen mit digitaler Anzeige und robuster Schutzart für Werkstatt und Labor. IP67-Schutz für sichere Werkstattmessungen Digitale Anzeige, Höhe 9 mm, ablesbar auf 0,001 mm Mikro‑Messbereich bis 25 mm für feine Bauteile Hohe Auflösung für präzise Qualitätskontrollen Lieferung geprüft durch Microtech Metrology, SKU 142022606 Präzision für hochanspruchsvolle Messaufgaben Der digitale Schieber liefert eine Ablesung von 0,001 mm, was eine deutliche Steigerung der Messauflösung gegenüber üblichen Standardgeräten bedeutet. Dadurch werden kleinste Maßabweichungen sichtbar und die Wiederholgenauigkeit in Prüfabläufen erhöht. Anwender im Werkzeugbau und in der Feinmechanik profitieren von reproduzierbaren Ergebnissen, weil die feine Auflösung Verringerungen von Nacharbeiten und Ausschuss ermöglicht. Schutz und Langlebigkeit für raue Einsatzbedingungen Dank der IP67‑Schutzart ist das Messgerät gegen Eindringen von Staub und zeitweiliges Untertauchen geschützt, was die Einsatzfähigkeit in der Fertigung und in feuchten Werkstattumgebungen sichert. Die verschleißarme Ausführung der Anzeige und die dichte Elektronik reduzieren Ausfallzeiten, sodass sich Prüfprozesse stabil in den Produktionsablauf integrieren lassen. Kompakte Bauform für filigrane Messungen Mit einem Messbereich von maximal 25 mm gehört dieses Modell zur Mikro‑Klasse, die speziell für feinmechanische Arbeiten entwickelt wurde. Diese kurzbauende Konstruktion minimiert Verwindungen und erleichtert Einhandmessungen an kleinen Bauteilen wie Uhrwerksteilen, Präzisionszahnrädern oder feinen Gehäusekomponenten. Die handliche Form sorgt für ergonomisches Arbeiten und präzise Positionierung. Zielgruppenorientierte Einsatzmöglichkeiten Das Gerät richtet sich an Uhrmacher, Feinmechaniker, Laborfachkräfte und Qualitätssicherer, die hochgenaue Innen‑ und Außenmessungen erwarten. Der digitale Schieber eignet sich für Prüfplätze mit engen Toleranzen, die konstante Ergebnisse verlangen, und ergänzt bestehende Messmittel, ohne komplexe Schnittstellen vorauszusetzen. Empfehlung: Den Microtech Metrology Messschieber über Metav Werkzeuge anfragen und persönliche technische Beratung für Ihre Messaufgabe nutzen — per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 142022606 Marke: Microtech Metrology Bezeichnung: Messschieber GTIN: 4061905455445 Fakten Messbereich: 1–25 mm Ablesung: 0,001 mm Anzeigehöhe: 9 mm Besonderheiten IP67: Staub‑ und Strahlwasser geschützt Digitale Anzeige Kategorie: Messschieber Digital ECLASS: 21170344 FAQ Wie genau ist die Messung mit diesem digitalen Schieber? Der Microtech Metrology Messschieber (SKU 142022606) erreicht eine Ablesung von 0,001 mm und eignet sich damit für hochpräzise Kontrollen im Labor und in der Feinmechanik. Für welche Einsatzbereiche ist das Gerät besonders geeignet? Aufgrund des Mikro‑Messbereichs bis 25 mm ist der Schieber ideal für Uhrmacher, Feinmechaniker und präzise Qualitätsprüfungen an kleinen Bauteilen. Ist das Gerät für den Einsatz in feuchten Umgebungen geeignet? Ja, der Messschieber verfügt über die Schutzart IP67, wodurch er gegen Staub und zeitweiliges Eintauchen geschützt ist und sich für anspruchsvolle Werkstattbedingungen eignet. Welche Anzeige bietet das Gerät? Das Modell besitzt eine digitale Anzeige mit einer Höhe von 9 mm, die Messwerte klar lesbar darstellt und die präzise Ablesung von 0,001 mm unterstützt. Wird das Gerät kalibriert ausgeliefert? Informationen zur serienmäßigen Kalibrierung sind nicht in den vorliegenden Daten enthalten; bitte bei Bedarf die Kalibrieroptionen über Metav Werkzeuge abfragen. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
260mm Digital Einbaumessschieber waagerecht, 0,01mm, DIN 862 - Metav IndustryLine
Das 1989 gegründete Vertriebsunternehmen von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für hevorragende Messwerkzeuge zu einem hervorragenden Preis. Das wichtigste auf einen Blick für Metav IndustryLine 100mm Einbaumessschieber waagerecht Messbereich: bis 100mm Ablesung: 0,01mm Material: Messschiene aus Aluminium (30x7,9mm) Ausführung: digital Datenausgang: RB 5 Wenn jedes Hundertstel zählt Mikro‑Schieblehre in 0–100mm Messlänge für filigrane Bauteile, enge Zugänge und genaue Ergebnisse in Feinstmechanik und Uhrmacherei. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber.. Verlässliche Präzision durch Fertigung nach DIN 862 Verlassen Sie sich auf Präzision, die weltweit Standards setzt: Unser Einbaumessschieber erfüllt die Anforderungen der DIN 862 in jedem Detail – von der Materialauswahl über die Fertigung bis hin zur Kalibrierung. Damit garantieren wir exakte Messergebnisse, internationale Zertifikate und höchste Akzeptanz bei Audits und Kundenabnahmen. Qualität, der Sie vertrauen können. Expertenhinweis: Reinige regelmäßig Deine Messwerkzeuge. Damit stellst Du sicher, das Dein Messwerkzeug lange erhalten bleibt. Sie sind unsicher, ob das Werkzeug für Ihre Anwendung geeignet ist? Oder benötigen Sie weitere technische Informationen? Kein Problem – sprechen Sie uns gerne an! 📧 eMail: info@metav-werkzeuge.com ☎️ Telefon: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Spezifikationen zumdigitalen Einbaumessschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Einbaumessschieber Bestellnummer: M218.353 Zahlen Fakten: Messbereich: 0 bis 100mm Gewicht: 0,25kg Norm: DIN 862 Ablesung: 0,01mm Datenausgang: RB 5 Ablesung in Inch/Zoll: 0,0005 Genauigkeit: 0,03mm Länge: 260mm Besonderheiten Ausführung: digital Material: Messschiene aus Aluminium (30x7,9mm) Digitalanzeige: mit EIN/AUS-, mm/inch- und NULL-Taste Messsystem: kapazitiv waagerecht Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Worauf beim Messschieber kaufen geachtet werden sollte: Während der Genauigkeit und dem Messbereich Beachtung geschenkt werden muss, sind auch Funktionen wie Dateneingabe-Optionen und Kontrolle der Messkraft von maßgeblicher Relevanz. Für die Qualitätssicherung sowie Laboreinsätze erweist sich der Messschieber mit geregelter Messkraft als besonders nutzbringend. Zusätzlich sollten man darauf Achten, ob man einen kalibrierten Messschieber braucht. Eine Kalibrierung kann direkt nach Lieferung vorgenommen werden und sollte zur Sicherung der Prozessqualität jedes Jahr erneuert werden.
26mm Internal Measuring Insert 7x2mm Ball-Shaped Contact Surface 70mm Length For Digital Caliper Series 240.201-240.205 - Metav IndustryLine
Take advantage of a compact, purpose‑built internal measuring insert that combines durable stainless steel construction with a rounded measuring face for reproducible contact and minimal part damage; the design is optimised for internal measurements starting at 26 mm and integrates directly with the Digital‑Uni caliper family for fast retrofit. Order via Metav Werkzeuge or consult our specialists for compatibility advice. M240.241 internal measuring insert for Digital‑Uni calipers – stainless steel, rounded face The M240.241 is an internal measuring insert designed for internal measurements from 26 mm, offering a 7 x 2 mm profile and a ball‑shaped measuring face for secure contact in confined bores on Digital‑Uni calipers series 240.201–240.205. Internal measuring insert from 26 mm Rounded (ball) measuring face for safe contact Compatible with Digital‑Uni calipers series 240.201–240.205 Consistent internal contact for repeatable results The insert is engineered to provide repeatable internal measurement where restricted access or delicate surfaces demand a gentle touch. The rounded measuring face distributes contact force more evenly than a sharp tip, reducing local indentation and producing more consistent results on bore diameters. Made from stainless steel, the measuring tip resists corrosion and maintains geometric integrity under frequent use, supporting stable measurement routines in workshop and inspection settings. This construction helps the measuring system preserve calibration and reduces downstream rework. Compact geometry that fits tight bores and precision tools With a slender 7 x 2 mm profile and a measuring section specified at 70 mm length, the insert is suited to small‑diameter bores and deep features where standard jaws are impractical. The slim profile enables access without extensive modification to the caliper, so integration into existing measuring setups is efficient. The part’s low mass (approx. 0.08 kg) minimises inertial effects, which supports steady handling and precise positional control during measurement cycles on both manual and semi‑automated inspection stations. Direct compatibility reduces setup time Designed specifically for the Digital‑Uni calipers series 240.201–240.205, this insert allows rapid replacement of existing internal jaws with minimal tooling. Compatibility ensures that digital readout characteristics and mechanical alignment are preserved, so traceability and measurement documentation remain consistent. The insert’s geometry was chosen to match the mounting and guidance of the host calipers, avoiding the need for special adapters and thereby reducing machine downtime during tool changes. Practical benefits for production and quality control The combination of a ball‑shaped contact and stainless material makes the component a reliable choice for repeated internal checks, particularly during in‑process inspection or final quality control. The insert supports precise bore verification without marking, which is beneficial when working with finished surfaces or soft materials. For procurement managers and metrology technicians, this means a straightforward upgrade path to improve measurement coverage while keeping existing instruments in service. Contact Metav Werkzeuge for tailored technical advice and to secure the M240.241 internal measuring insert for seamless integration into the Digital‑Uni caliper family; call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss delivery and compatibility details Technical data Article number: M240.241 GTIN: 4061905053818 Weight: 0.08 kg Material: stainless steel Measuring face length: 70 mm Internal measurement start: 26 mm Compatibility: Digital‑Uni calipers series 240.201–240.205 Core specifications Diameter: 2 mm Profile: 7 x 2 mm Applicable measurement: internal Mass: 0.08 kg Special features Ball‑shaped (rounded) measuring face Corrosion‑resistant stainless steel construction Designed for direct retrofit into listed Digital‑Uni calipers FAQ Is this insert suitable for all Digital‑Uni calipers? The insert is compatible with the Digital‑Uni calipers series 240.201–240.205; compatibility with other models should be confirmed against the caliper’s mounting interface. What is the measuring range for internal measurement? The insert enables internal measurements starting at 26 mm, providing access into bores and recesses beyond that diameter. Will the rounded measuring face mark fragile surfaces? The ball‑shaped measuring face is intended to reduce point loading and therefore lowers the risk of marking compared with sharp tips; material and finish of the workpiece will still influence contact behaviour. Can the insert be used for external measurements? This component is designed as an internal measuring insert; external measurement suitability is not provided and should be handled with purpose‑built external jaws. What material is the insert made from and why does it matter? Constructed from stainless steel, the insert offers corrosion resistance and dimensional stability, which supports longevity and repeatable measuring performance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
28mm Internal Measuring Insert 7mm Ball End, 70mm Length for Digital Uni Caliper Series 240.201-240.205 - Metav IndustryLine
Take advantage of precise internal contact geometry and robust stainless construction to achieve repeatable readings in confined bores; the ball-shaped measuring face and 70 mm effective length reduce point-load errors for smoother inspection cycles. Order the insert directly via Metav Werkzeuge or ask the consultants for compatibility guidance. M240.242 Internal Measuring Insert — ball-shaped face, 70 mm effective length for Digital‑Uni calipers M240.242 is an internal measuring insert designed for internal measurements from 28 mm and intended for use with the Digital‑Uni calipers series 240.201–240.205. Ball-shaped measuring face for reliable contact 70 mm effective measuring length for internal fits Stainless steel construction for corrosion resistance Compatible with Digital‑Uni calipers 240.201–240.205 Reliable contact geometry for confined bores The ballised tip delivers a defined contact point that reduces sensitivity to minor misalignment during internal measurement, helping to produce repeatable readings in small-diameter bores. By concentrating the contact on a radially curved face, the insert avoids sharp point loading that can skew results; this behaviour is particularly helpful when inspecting bore seats, counterbores or stepped interiors where conventional flat jaws can produce variable contact. The result is faster decision-making in quality checks and fewer retests. Robust stainless design for workshop conditions Manufactured from stainless steel, the measuring insert offers corrosion-resistant performance in mixed workshop environments and resists wear at the contact face for extended service life. The 70 mm effective length balances access into deeper features with sufficient rigidity to limit deflection, which supports stable measurements across repetitive cycles. The compact mass also minimises added inertia to the caliper slider, preserving the instrument’s normal handling characteristics. Seamless integration with Digital‑Uni calipers and inspection workflows Engineered specifically for the Digital‑Uni calipers (series 240.201–240.205), this attachment installs simply onto the existing jaw mount and restores internal measuring capability from 28 mm upwards without complex adjustments. For production lines and bench inspection, the insert streamlines transitions between external and internal checks and reduces set‑up time for small-batch runs. Calibration intervals remain dictated by in‑house procedures; the accessory supports consistent traceability when combined with routine caliper verification. Contact Metav Werkzeuge for personalised compatibility advice or to arrange purchase of the M240.242 insert; our consultants in Emmerich can confirm fitment with existing Digital‑Uni calipers and advise on inspection integration Technical data Article number: M240.242 GTIN: 4061905053825 Weight: 0.08 kg Material: stainless steel Diameter: 4 mm Effective length: 70 mm Internal measurement from: 28 mm Compatible series: 240.201–240.205 Facts ECLASS: 21170324 SKU: M240.242 Special features Ball-shaped measuring face Corrosion-resistant finish Lightweight attachment for caliper slider FAQ What measurement range does the insert cover for internal measurements? The insert enables internal measurements from 28 mm upwards when fitted to the compatible Digital‑Uni calipers in series 240.201–240.205. Is the measuring face designed to reduce measurement variability? Yes, the ball-shaped measuring face of the M240.242 provides a defined contact geometry that reduces point-load effects and improves repeatability in confined bores. Can the insert be used on any caliper brand? The accessory is designed for the Digital‑Uni calipers (series 240.201–240.205); fitment on other brands may require verification — Metav Werkzeuge can advise on cross‑compatibility. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2m USB Data And Charging Cable MicroUSB For Data Met Instruments - Microtech Metrology
Take advantage of reliable HID data transfer, charging capability and a practical 2 m reach for effortless instrument connection; order the USB DATA+CHARGING cable for Data Met instruments directly via Metav Werkzeuge or consult our advisors if any integration questions arise. USB DATA+CHARGING cable for Data Met instruments — 2 m MicroUSB lead by Microtech Metrology The USB DATA+CHARGING cable for Data Met instruments is a 2 m MicroUSB connection lead designed for charging and HID‑mode data transfer between Microtech Data Met measuring instruments and customer applications 2 m cable length for flexible positioning Dual function: charging and HID data transfer Compatible with Microtech Data Met instruments Robust USB-A to MicroUSB connection Reliable data capture and uninterrupted power for measurement workflows This 2 m MicroUSB lead combines charging and data transfer in a single connection, reducing cable clutter and simplifying routine measurements. The cable supports HID mode (keyboard emulation), which enables host applications to receive measurement values directly without bespoke drivers, increasing compatibility with standard data-logging software and spreadsheets. For production and quality‑assurance environments, the result is more consistent traceability and fewer interruptions during batch inspections, achieved through a dependable link for both power and digital output. Workshop-ready design that prioritises durability and ease of use Built for everyday industrial handling, the lead features a standard USB‑A to MicroUSB interface with a flexible jacket and secure connector fit that withstand frequent plugging and movement. The construction aims to prevent accidental disconnects during measurement sequences while keeping handling simple for bench and mobile use. This practical design reduces downtime and supports efficient workflows in machine shops and inspection stations, where reliable connectivity and robust components are essential for repeatable results. Simple integration with existing systems and straightforward contents Integration is straightforward because the cable uses the common HID protocol; the instrument appears as a keyboard input device, so measured values can be captured directly into existing applications with no driver installation. The package contains the cable only, offering a compact accessory for field or laboratory setups. Compatibility is specified for Microtech Data Met instruments that accept MicroUSB, making this lead a focused solution for secure data capture and simultaneous charging during measurement sessions. For secure data logging and continuous operation with Microtech instruments, contact Metav Werkzeuge in Emmerich for supply and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 141077012 Length: 2 m Interface: USB-A to MicroUSB Facts Function: Charging and data transfer in HID mode Compatibility: For Microtech Data Met instruments Contents: Cable only Special features HID (keyboard) mode for direct app input Dual use: power and data via single cable Industrial‑grade connector durability FAQ What exactly does HID mode mean for data transfer? HID mode means the cable allows the connected Microtech Data Met instrument to send measurement values as keyboard input, enabling direct capture into most applications without additional drivers. Will this cable charge instruments while transmitting data? Yes, the USB DATA+CHARGING cable for Data Met instruments supports simultaneous charging and data transfer, so measurement sessions can continue while the instrument is powered. Is the cable compatible with all Microtech instruments? The lead is specified for Microtech Data Met instruments that use a MicroUSB connection; compatibility should be checked against the instrument’s MicroUSB port and data mode. Does the delivery include any adapters or software? The package contains the cable only; no adapters or software are included. What is the product SKU for ordering? The product is listed under SKU 141077012 for straightforward procurement. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2m USB HID Data Cable for Certi Met Digital Calipers and Indicators IP54 - Microtech Metrology
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2m USB-C Data And Charging Cable For Data Met Instruments - Microtech Metrology
Take advantage of USB‑C charging and HID data transfer in a single, 2 m lead for reliable instrument connectivity; the cable supports straightforward integration into existing measurement workflows and reduces data handling steps. Order the cable directly via Metav Werkzeuge or ask consultants for assistance. USB DATA+CHARGING cable for Data Met instruments 2m USB-C – USB‑C charging and HID data transfer for Microtech A USB DATA+CHARGING cable for Data Met instruments 2m USB-C supplying both power and direct HID (keyboard) data transfer, intended for use with Microtech Data Met measurement instruments. 2 m length for flexible reach USB‑C connector for modern instruments Charging plus HID data transfer Compatible with Microtech Data Met instruments Stable power and direct data capture for metrology workflows The cable provides a single‑lead solution for simultaneous charging and data transfer, simplifying routine measurement tasks. By using HID mode (keyboard emulation) the lead transmits readings directly into target applications without intermediate conversion steps, which reduces transcription errors and saves time during documentation. The USB‑C interface ensures compatibility with recent Data Met models, enabling consistent electrical contact and straightforward connection in busy workshop environments. Ready integration that keeps measurement processes efficient Designed for plug‑and‑play use with Microtech Data Met instruments, this 2 m lead extends reach from measuring station to PC or tablet while keeping the workspace organised. The combination of power delivery and keyboard‑style data output supports continuous logging sessions and removes the need for battery swapping during long checks. As a practical accessory, it helps maintain throughput in inspection routines and supports uninterrupted quality checks. Practical benefits for digital record keeping and traceability Delivering readings straight to customer apps in HID mode helps streamline digital traceability: measurements appear as keystrokes in the receiving software, so results can be recorded instantly without additional middleware. The included cable is supplied as the single item required for connection, reducing procurement complexity. This straightforward connectivity option contributes to reproducible data capture and a more efficient measurement chain across production and inspection tasks. For procurement or technical advice regarding the Microtech USB‑C data and charging lead, contact Metav Werkzeuge for tailored support and rapid supply: info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: 141077022 Manufacturer: Microtech Metrology Length: 2 m Connector: USB‑C Function: Charging and HID data transfer Contents: Cable Specifications Cable length: 2 m SKU: 141077022 Compatibility & Features For Microtech Data Met instruments (USB‑C) USB data cable for Data Met MICROTECH instruments HID keyboard mode for direct app input FAQ Is this cable compatible with older Data Met models that use USB‑A? Compatibility is specific to instruments with a USB‑C socket; adapters may be required for USB‑A ports and should preserve HID functionality. Does the cable charge the instrument while sending data? Yes, the cable supplies charging power and simultaneously transmits measurements via HID mode for direct entry into applications. Are additional drivers required to receive data from the instrument? Standard operating systems accept HID keyboard input natively, so no special drivers are normally required for data capture. What length is the cable and how does that help in the workshop? The lead is 2 m long, providing flexible reach between instrument and workstation to support comfortable positioning and continuous logging. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
3-Tool MDS Standard Data Connection Set With USB Dongle, Windows App - Microtech Metrology
Take advantage of a ready-to-run data-collection kit with MDS 5.5 STANDARD compatibility, USB dongle activation and automatic connection management to streamline measurement logging and reduce manual entry errors — order the set directly via Metav Werkzeuge or consult the team for integration advice. MDS Standard Accessory Set — Windows data-collection kit for Microtech Metrology The MDS Standard Accessory Set is a compact accessory kit that turns compatible instruments into a synchronised data-collection system, ideal for workshop measurement logging and quality-control workflows. Ready-to-run data-collection kit Supports Microtech instruments connectivity Includes USB dongle for secure activation Windows MDS 5.5 compatible Fast, out-of-the-box data acquisition for production The accessory kit provides a ready-to-run solution that gets measurement data into production systems quickly. Delivered as a compact set, it includes a single USB dongle for licence activation and integrates with the MDS 5.5 STANDARD application on Windows, enabling immediate data capture from connected instruments. Because autoconnection and synchronising are built in, manual transcription is minimised, reducing transcription errors and saving operator time. The practical result is faster inspection cycles and more consistent traceability of recorded values. Reliable integration that reduces process interruptions Designed for use with Microtech instruments, the kit supports zero-setting and offers optional peripherals such as DataMet Buttons or a footswitch for hands-free data capture and zeroing. These options are beneficial in environments where operators handle components during measurement and need a repeatable, low-latency method for recording readings. The accessory set’s connection modes and synchronising routines are intended to maintain stable data streams into spreadsheet or database workflows, improving the reliability of subsequent quality checks. Practical benefits for workshops and quality control By centralising measurement collection and automating connection handling, the kit supports more efficient documentation and easier audit trails. Integration with the Windows-based application simplifies downstream data processing and reduces the administrative burden on technicians. For routine inspection tasks, the ability to collect consistent, timestamped readings enhances process control and allows faster reactions to deviations, which supports both operational efficiency and product quality. For a seamless upgrade to organised measurement logging, contact Metav Werkzeuge to arrange supply of the Microtech MDS Standard accessory set or to discuss compatibility with specific instruments — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 299110504 GTIN: 4061905452109 Label: Standard MDS data set for Windows Manufacturer: Microtech Metrology Facts Max connections: 3 USB dongles: 1 Special features Ready data-collecting solution from box Collects data from Microtech instruments and supports zero setting Autoconnection and data reading synchronising Connection modes for stable data transfer Optional DataMet Buttons and footswitch for data capture Application: MDS 5.5 STANDARD app for Windows Supplied as a set FAQ How many instruments can be connected at the same time with this set? The accessory set supports up to three simultaneous connections so multiple Microtech instruments can be logged in parallel. Is there a licence or dongle required to run the software? Yes, the package includes one USB dongle for activation of the MDS 5.5 STANDARD application on Windows. Can measurements be recorded hands-free? Yes, the set supports optional DataMet Buttons and a footswitch for hands-free data capture and zero setting during measurement tasks. Which application is required to use this accessory kit? The kit is designed for use with the MDS 5.5 STANDARD app for Windows and integrates measurement streams into that environment. What is the SKU for ordering or referencing the product? The SKU for this accessory set is 299110504 and it is listed under the Standard MDS data set for Windows. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
30-330mm Digital Precision Caliper Colour Touchscreen, Wireless USB, IP54 - Microtech Metrology
Take advantage of precise shop-floor measurement, reliable data transfer and robust protection for uninterrupted inspection workflows; the combination of 0.005 mm resolution, Wireless+USB output and IP54 protection supports fast data capture and durable use—order or request advice via Metav Werkzeuge for tailored integration. Digital caliper by Microtech Metrology — 30–330 mm, Colour 1.5" touchscreen, Wireless+USB A digital caliper designed for medium-range precision measurement tasks in machine shops, inspection bays and production control. Colour 1.5" touchscreen for clear readouts Wireless + USB data output for traceable capture IP54 protection for industrial environments Measuring range 30–330 mm for medium-range work Precision that shortens inspection cycles The measuring device delivers a high 0.005 mm resolution that raises the precision level beyond standard workshop calipers. As a medium-range instrument (measuring capability up to 330 mm), it bridges bench-scale checks and larger component inspections without the handling compromises of longer tools. The improved resolution reduces uncertainty in pass/fail decisions and supports tighter tolerance checks while maintaining a practical measuring length for everyday tasks. This measurable increase in data quality contributes directly to fewer reworks and clearer quality documentation. Seamless data handling to speed throughput Integrated Wireless+USB connectivity and a Colour 1.5" touchscreen simplify digital measurement workflows: readings are displayed clearly on the touch interface and can be exported via wireless link or USB for immediate logging. This digital handover minimises transcription errors and accelerates batch reporting, making the caliper a pragmatic choice for process-controlled environments. The combination of touch input and reliable interfaces supports both manual inspection and automated data collection without complex setup. Durable design for regular shop use With an IP54 rating, the instrument tolerates dust ingress and splash exposure common in production settings, extending service life compared with unprotected devices. A jaw length of 43 mm provides stable contact area for reproducible measurements, helping to reduce operator-induced variation. The construction and protective rating are balanced to suit daily handling while ensuring consistent metrology performance over many cycles. Clear benefits for quality-focused teams The tool pairs precise measurement (0.005 mm resolution) with practical workshop features—robust ingress protection, straightforward data export and a readable colour display—so inspection teams gain both certainty and speed. Where traceable data capture is required, the caliper integrates into quality documentation without additional converters or complex adapters, supporting leaner inspection routines and more dependable process control. Choose the Microtech Metrology digital caliper for accurate medium-range measurement and straightforward data integration — contact Metav Werkzeuge in Emmerich for specification support or to discuss compatibility with existing data systems (info@metav-werkzeuge.com / +49 2822 7131930) Technical data Article number: 141430307 GTIN: 4061905037931 Brand: Microtech Metrology eClass: 21170344 Core specifications Measuring range: 30–330 mm Resolution: 0.005 mm Display: Colour 1.5" touchscreen Jaw length: 43 mm Protection class: IP54 Features Data output: Wireless + USB Digital instrument SKU: 141430307 FAQ What measurement range does the instrument cover? The caliper measures from 30 to 330 mm, placing it in the medium‑range class suited for general machine‑shop and fixture work. What resolution and accuracy can be expected? Resolution is 0.005 mm; this enables finer discrimination than many standard workshop calipers and supports tighter quality tolerances. How are readings exported for documentation? Readings can be transferred via the integrated Wireless + USB interfaces to inspection software or data loggers for traceable records. Is the device suitable for dirty or humid shop environments? Yes — the IP54 rating provides protection against dust and water splashes common in industrial settings. Which display does the caliper use for measurement readout? A colour 1.5" touchscreen presents measurements clearly and allows straightforward interaction for zeroing and mode selection. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Precision calipers for accurate, repeatable measurement
Calipers are the indispensable length-measuring tools for industry and workshop environments, enabling fast and exact external, internal, depth and step measurements. Our professional range of precision calipers, including vernier calipers, dial calipers and digital calipers, combines mechanical robustness with modern data handling to support consistent quality assurance.
How these calipers work and where they help most
Analogue vernier calipers deliver reliable, autarkic operation via the vernier scale and are best suited to heavy-duty workshop use where durability matters. Digital calipers provide a contrast-rich display, minimise reading errors and speed up inspection routines through functions such as zero setting and data output. At the high end, touchscreen calipers from Microtech feature an integrated microcomputer, colour touch display, built-in error-tolerance checks and wireless data transmission, making them suited for Industry 4.0 workflows. Workshop calipers with extended measuring ranges offer optional fine adjustment and rounded tips for interior measurements, while in-built calipers can be mounted directly to machines or test rigs to monitor travel. Specialty calipers cover tasks such as deep grooves, pipe wall thickness, brake disc inspection, three-point measurements and bespoke geometries.
Tangible benefits that improve production performance
- Faster throughput: digital calipers with data output reduce manual entry and accelerate quality checks.
- Higher repeatability: robust mechanical design and error-tolerance controls raise measurement consistency.
- Flexible integration: wireless data transmission and touchscreen operation simplify digitisation to existing systems.
- Reduced downtime: workshop and in-built variants with fine adjustment minimise rework and set-up time.
- Application coverage: specialty calipers adapt to complex geometries, from three-point checks to deep-niche measurements.
Microtech and metav — quality and supply you can rely on
For high-end, touchscreen-equipped instruments, Microtech represents the technological benchmark thanks to its integrated controls and wireless capabilities. As a precision partner, Metav complements this with decades of experience and a comprehensive offering: more than 250,000 products, a European quality filter in Emmerich and the trust of over 48,000 customers, making Metav a sensible central source for calipers and measuring equipment.
Quick summary
Calipers — from analogue vernier to touchscreen digital — deliver the measurement accuracy and data connectivity modern production demands while reducing inspection time and improving repeatability.
FAQ
What are the main differences between analogue and digital calipers?
Analogue vernier calipers rely on a vernier scale and are prized for ruggedness and independence from power, whereas digital calipers provide a contrast display, zero setting and data output to eliminate readout errors and speed up quality processes.
Can calipers be integrated into a digital inspection workflow?
Yes. Many digital calipers and touchscreen models support data output and wireless data transmission, enabling direct transfer of measurements into quality-management systems or statistical process control.
Which caliper type is best for large measuring ranges in a workshop?
Workshop calipers with extended measuring ranges and optional fine adjustment are designed for large components; they maintain mechanical stability and are available with rounded interior jaws for safer internal measurements.
Are there calipers for specialised geometries like deep grooves or brake discs?
Specialty calipers are explicitly engineered for such tasks. They feature tailored measuring faces for deep-niche measurements, pipe wall thicknesses, brake-disc checks and three-point or flexible geometries.
How do touchscreen calipers from Microtech improve quality control?
Microtech touchscreen calipers combine an integrated microcomputer, colour touch display and built-in error-tolerance checks with wireless data transmission, allowing immediate verification, reduced human error and seamless digitisation in line with Industry 4.0 practices.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com