Carbide indexable inserts for high‑performance metalworking
Carbide indexable inserts are wear‑resistant cutting elements designed to deliver economical, precise material removal across a wide range of workpieces, offering excellent balance between extreme wear resistance and the toughness required to withstand mechanical shocks. Used on toolholders such as cutters, turning tools and twist drills, they enable efficient machining of materials from soft non‑ferrous alloys to high‑strength steels by optimising cutting forces and thermal stability. For standard accessible contours external coolant is often sufficient, while deep holes, heavy cutting or machining of stainless steel and titanium alloys benefit from internal coolant channels to protect the cutting edge, improve chip control and extend insert life. Key advantages include high durability, consistent surface finish and reduced tool changeover times through the use of replaceable indexable inserts, carbide grades and toolholder systems.
2.5mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, 2.5 mm, 118° tip, HSS, short, Black, DIN 338 (MetavCUT) The Twist Drill Type N for drilling metal offers precise pilot-hole performance in drilling machines and hand drills, with a short design and HSS material for stability and durability. Short design increases drilling stability High-Speed Steel (HSS) suited for metal work 2.5 mm diameter for accurate pilot holes 118° tip improves centring on curved surfaces Precision and stability for demanding metal work A short, roll-formed Twist Drill delivers reduced overhang and significantly less bending during operation, which results in greater accuracy when producing pilot holes. The compact geometry means the tip remains concentric with the spindle even under load, lowering the risk of runout and improving hole quality. This construction is particularly valuable when working on components requiring tight tolerances, where consistent alignment and repeatable results are essential. Durable HSS material and industrial standard conformity Made from HSS (High Speed Steel) and manufactured to DIN 338, this short twist drill combines wear resistance with toughness for standard metalworking tasks. HSS provides a balance between hardness and elasticity, reducing breakage risk in diameters below 6 mm and enabling effective machining of alloyed and unalloyed steel, cast iron, non-ferrous metals and plastics. Compliance with DIN 338 guarantees consistent dimensions and performance suited to both stationary and portable drilling equipment. Optimised geometry for reliable centring and chip evacuation The 118° point angle and Type N spiral form (normal twist) support controlled entry and moderate cutting forces, helping to centre the drill on slightly curved or uneven surfaces. The short spiral length and classic flute geometry aid chip evacuation in metal drilling, reducing heat buildup and improving tool life. For tasks where precise pilot holes are required before reaming or tapping, this geometry offers an effective compromise between fast penetration and stable guidance. Who benefits and typical applications Engineers, maintenance technicians and metalworkers who require reliable pilot drilling will value the combination of Type N geometry and short overall length. The bit is intended primarily for metal applications and is compatible with standard chuck-mounted drilling machines and many hand drills, making it suitable for workshop and on-site operations. MetavCUT designed this component for repeatable, everyday use where ease of regrinding and consistent performance matter. Choose MetavCUT’s Twist Drill for precision metal drilling and consult METAV Werkzeuge’s experts for tailored advice — Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40025-FDA Diameter: 2.5 mm Spiral length: 30 mm Overall length: 57 mm Point angle: 118° Type: Type N Execution: short Material: HSS Norm: DIN 338 Colour: black Application: Drills for metal For: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill, a Type N metal drill, is primarily used for machining metals and is effective on alloyed and unalloyed steel, cast iron, non-ferrous metals and plastics; its short design and HSS material improve stability and reduce breakage risk in small diameters. Which three drill types are commonly distinguished? Commonly, drills are classified as metal drills, wood drills and masonry/concrete drills — the MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking tasks.
2.5mm HSS-G Body Drill ,double sided, black finished without margin - MetavCUT
Body Drill (Karosseriebohrer) — 2.5 mm, 135° Tip, Double-sided, Black Finished, HSS‑G The Body Drill (Karosseriebohrer) is a double-sided Twist Drill for Drilling Machines, designed for precise metalworking with a 2.5 mm diameter and a 135° tip angle. Double-sided design: two usable cutting ends 2.5 mm diameter for precise metal holes 135° tip angle for harder and alloyed steels HSS‑G fully ground for high precision 43 mm overall length with 10 mm flute Faster, more accurate metal drilling for demanding jobs The MetavCUT Body Drill delivers a clear performance advantage when machining metals. Thanks to the HSS‑G (fully ground High Speed Steel) construction, the twist drill offers very sharp cutting edges and improved runout accuracy, which produces cleaner bores. For users working with alloyed and unalloyed steels or cast iron, the 135° tip angle reduces wandering on hard surfaces and shortens initial penetration time, so drilling proceeds more reliably with less rework. Double‑ended design reduces downtime and tool changes A major practical benefit of this double‑sided twist drill is its two usable cutting ends, effectively giving two functional drill tips in one tool. This design is especially useful in workshops where rapid tool swaps interrupt workflow: when one end becomes blunt, reversing the bit restores cutting performance immediately. The compact, robust geometry typical of body drills makes them well suited for thin sheet and bonnet‑type holes found in bodywork and thin‑metal assemblies. Clear recommendation for specific applications and users This twist drill is tailored for professionals and advanced hobbyists who require precision in metalworking. It is particularly recommended for tasks in automotive bodywork, sheet metal fabrication and maintenance where small diameter, high‑accuracy holes are needed. Users targeting holes up to 2.5 mm and working with materials such as temper cast steels, sintered iron or hard plastics will benefit from the reduced feed force and improved centring provided by the chosen geometry. Usage tips to maximise life and hole quality To achieve best results with this HSS‑G Body Drill, use moderate cutting speeds and suitable coolant or lubrication when machining hard or alloyed steels; the ground geometry offers high edge sharpness but can be more brittle than rolled types. The fully ground shank ensures stable clamping and accurate concentricity in chucks, while the 10 mm flute length supports efficient chip evacuation for the 43 mm overall tool length. For stationary drilling or applications with cooling, this bit is especially effective. Strong recommendation: Choose the MetavCUT HSS‑G Body Drill for precise, reliable metal drilling and contact METAV Werkzeuge for expert technical advice via email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or on WhatsApp at +49 170 2837271 Technical data Designation: Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 59025-FDA Diameter: 2.5 mm Tip angle: 135° Execution: double sided Colour: black finished without margin Suitable for: Drilling Machine Spiral (flute) length: 10 mm Shank execution: fully ground Model series: Profi Line Application: Drills for metal Overall length: 43 mm Material: HSS-G Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can I drill with the Body Drill from MetavCUT, and when is it most effective? The MetavCUT Body Drill (a Twist Drill) is particularly effective for alloyed and unalloyed steels, cast steel, cast iron, sintered iron, tempered castings, non‑ferrous metals and hard plastics. Its HSS‑G ground geometry and 135° tip make it suitable for harder workpieces where precise centring and clean hole edges are required. Is the double‑sided design of the MetavCUT Body Drill suitable for workshop use? Yes, the double‑sided Body Drill by MetavCUT is ideal for workshop situations: as a double‑ended Twist Drill it provides two cutting tips in one tool, allowing quick reversal when one end dulls and reducing downtime; nevertheless, for high‑speed or very abrasive operations a stationary setup with cooling is recommended. What are Twist Drills used for? A Twist Drill, such as the MetavCUT Body Drill, is mainly used for machining high‑strength materials and larger drill diameters. This form is easy to grind and withstands greater loads, making it a common choice for demanding metalworking tasks. Which three drill types exist? The three common drill types are metal drills, wood drills and masonry/concrete drills, with the MetavCUT Body Drill belonging to the metal drill category.
2.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill – Extra‑Long HSS‑G 2.5 mm, 135° (Bright Finished, Fully Ground, DIN 1869) by MetavCUT A Twist Drill in Extra‑Long execution designed for deep metal drilling with Drilling Machines and demanding workshop applications. Extra‑long design for deep boreholes 2.5 mm Diameter for precise pilot holes 135° Tip Angle for harder materials Fully Ground Shank for high concentricity Conforms to DIN 1869 for industrial use Faster metal machining with hardened HSS‑G for professionals The HSS‑G material and CNC grinding deliver a markedly sharper cutting geometry that enables up to 40% faster drilling with 50% less feed force compared to conventional HSS bits. This means less operator fatigue and higher throughput in serial production. The combination of HSS‑G and a ground flute geometry also produces cleaner holes in alloyed and unalloyed steels, reducing rework and saving machining time. Reach deeper, work cleaner — ideal for tight or hard‑to‑access spots Designed as an Extra‑Long bit (Total Length 140 mm, Spiral Length 95 mm), this drill lets users tackle deep or hard‑to‑reach bores without extensions. The extended working length reduces the need for additional tooling and ensures a straighter approach in recessed positions. For projects where accessibility is the limit, the longer flute and bright finished surface ease chip evacuation and visual alignment. Precision and stability for demanding materials The Fully Ground shank and precision flute grind result in excellent runout and centring, producing accurately sized holes and better surface quality. With a 135° tip angle, the geometry is optimised for harder workpiece materials such as stainless and tempered steels, shortening plunge time and improving control during initial entry. This characteristic makes the bit particularly suited to workshop environments using Drilling Machines where repeatability matters. Usage advice to maximise lifetime and hole quality For durable performance, use the drill with appropriate coolant and avoid excessive side loads; the ground design is precise but can be more brittle than rolled alternatives. Regrinding is straightforward due to the clear flank geometry, but for best results regrind at a specialist to preserve cutting angles. The product is primarily intended for metalworking tasks including casting, sintered metals, and hard plastics, delivering reliable results when used in stationary drilling setups. I recommend the MetavCUT Extra‑Long Twist Drill for precise, deep metal drilling — for personalised advice or supplementary technical data contact METAV Werkzeuge: info@metav-werkzeuge.com, Phone +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 32025-FDA Diameter: 2.5 mm Total Length: 140 mm Spiral Length: 95 mm Tip Angle: 135° Execution: Extra long Shank Finish: Fully Ground Colour / Surface: Bright Finished Material: HSS‑G Standard: DIN 1869 Suitable For: Drilling Machine (Handheld use only with caution) Model Series: Standard Line Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill suitable for? The MetavCUT Twist Drill in HSS‑G is designed for demanding metalworking: it works well in alloyed and unalloyed Steel, Cast Steel, Grey Cast Iron, Sintered Iron, Tempered Castings, Non‑Ferrous Metals and Hard Plastics, providing clean, precise holes when used with appropriate machining parameters. Can the MetavCUT Twist Drill be used in a handheld drill? The MetavCUT Twist Drill is primarily intended for use in a Drilling Machine for best concentricity and cooling; handheld use is possible for light tasks but shorter drills or stationary setups are recommended to avoid breakage due to the ground geometry. For what is a Twist Drill used? A Twist Drill is mainly applied to the machining of high‑strength materials and large drill diameters; its shape allows easy sharpening and it sustains greater loads, making it suitable for demanding metalwork and deep holes. Which three drill types exist? The three main drill types are Metal Drill (Metalbrörer), Wood Drill, and Stone/Concrete Drill. Why are Twist Drills pointed (split point)? Pointing reduces the chisel edge at the tip of the Twist Drill, significantly lowering friction and the required feed force while improving centre‑tracking in the workpiece. Can a metal Twist Drill be used to drill wood? A metal Twist Drill can be used in wood but guidance is poorer and results are less clean; however, such drills are easier to resharpen and have a lower self‑feeding tendency.
2.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Der extra lange HSS‑G Spiralbohrer kombiniert Geschliffene Qualität mit einer Tieflochspirale nach DIN 1869 und ermöglicht schnelleres Bohren bei deutlich geringerer Anpresskraft; ideal für tiefe Bohrungen in Stahl und Guss. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT (Standard Line) Spiralbohrer extra lang für präzise Tiefbohrungen in Stahl und Guss Spiralbohrer extra lang für tiefe Bohrungen HSS‑G geschliffen für hohe Rundlaufgenauigkeit Spitzenwinkel 135° für härtere Werkstoffe Gesamtlänge 180 mm, Spirallänge 120 mm Geeignet für Handbohrmaschinen und Werkstatt Präzision und Effizienz bei Metallbohrungen Der HSS‑G Werkstoff und die geschliffene Schaftgeometrie sorgen für eine sehr scharfe Schneide und hohe Rundlaufgenauigkeit, was saubere Bohrlöcher und geringeren Nachbearbeitungsaufwand bedeutet. Durch den CNC‑Schliff wird das Werkstück schneller durchdrungen: Die Konstruktion ermöglicht ein bis zu 40 % schnelleres Bohren bei gleichzeitig bis zu 50 % geringerer Anpresskraft gegenüber herkömmlichen HSS‑Bohrern. Diese Kombination steigert die Produktivität in Werkstatt und Produktion. Tiefbohren sicher und kontrolliert umsetzen Dank der Tieflochspirale nach DIN 1869 und der extra langen Ausführung eignet sich der Bohrer besonders für tiefe Sacklochbohrungen oder schwer zugängliche Stellen. Bei Einsatz in Handgeführten Maschinen empfiehlt sich ein Anpunkten mit einem Zentrierbohrer zur erhöhten Positioniergenauigkeit. Kühlung und moderate Drehzahlen verlängern die Lebensdauer und verhindern übermäßige Spannungsbildung im Bohrgut. Materialeigenschaften und Fertigungsdetails Der geschliffene Spiralkeil führt zu sehr scharfen Kanten und exakter Bohroberfläche, weshalb diese Ausführung bei anspruchsvollen Metallarbeiten bevorzugt wird. Der Spitzenwinkel 135° reduziert das Ausbrechen beim Anbohren harter Werkstoffe wie legiertem Stahl oder Edelstahl. Beachten Sie, dass geschliffene Bohrer empfindlicher gegenüber Biegebeanspruchung sind; stationäre Aufnahme und Kühlung erhöhen die Standzeit deutlich. Zielgruppe, Einsatzbereiche und Praxisempfehlungen Dieser Spiralbohrer wurde für Werkstätten, Montagebetriebe und ambitionierte Handwerker entwickelt, die präzise Tiefbohrungen in legierten und unlegierten Stählen, Gusswerkstoffen und Hartkunststoffen benötigen. Für optimale Ergebnisse empfiehlt sich die Nutzung von Kühlschmierstoff, angepasste Drehzahl und bei Bedarf ein mehrstufiges Bohren bei größeren Querschnitten. Bei Fragen zur passenden Anwendung berät Metav kompetent und praxisnah. Empfehlung: MetavCUT Standard Line Spiralbohrer für präzise Tiefbohrungen direkt über Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 erwerben Produktmerkmale Artikelnummer: 33025-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Norm: DIN 1869 Material: HSS-G Ausführung: extra lang Daten Durchmesser: 2,5 mm Gesamtlänge: 180 mm Spirallänge: 120 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Schaftausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine Eignung: legierter und unlegierter Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle, Hartkunststoff HSS‑G: Hochgeschwindigkeitsstahl, geschliffen FAQ Für welche Materialien ist der MetavCUT Spiralbohrer geeignet? Der MetavCUT Spiralbohrer (Standard Line, SKU 33025-FDA) eignet sich für legierte und unlegierte Stähle, Gusswerkstoffe sowie Nichteisenmetalle und Hartkunststoffe; bei härteren Materialien empfiehlt sich der Einsatz des 135° Spitzenwinkels. Ist der Spiralbohrer für die Handbohrmaschine geeignet? Ja, der Spiralbohrer von MetavCUT ist für Handbohrmaschinen und Werkstattausrüstungen ausgelegt; bei tiefen Bohrungen sollten Kühlung und kontrollierte Drehzahlen verwendet werden, um die Standzeit zu erhöhen. Welche Vorteile bietet die geschliffene Ausführung? Die geschliffene Ausführung des HSS‑G Spiralbohrers (MetavCUT Standard Line, 33025-FDA) liefert schärfere Kanten und höhere Rundlaufgenauigkeit, was zu saubereren Bohrlöchern und weniger Nacharbeit führt. Wie tief kann mit dem extra langen Spiralbohrer gebohrt werden? Die extra lange Ausführung mit einer Spirallänge von 120 mm und Gesamtlänge 180 mm ist für tiefe Bohrungen konzipiert; bei extremen Tiefen wird dennoch Kühlung und abgestuftes Aufbohren empfohlen. Welche Wartungstipps gibt es für lange Standzeiten? Für lange Standzeiten empfiehlt Metav: Kühlung einsetzen, passende Drehzahlen wählen, bei Bedarf anplicken und stationäre Spannmittel nutzen; diese Hinweise gelten besonders für den MetavCUT Spiralbohrer SKU 33025-FDA.
2.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill Spiralbohrer – Twist Drill, 2.5 mm Ø, 135° tip, extra long, bright finished, fully ground, HSS‑G (DIN 1869) A Twist Drill Spiralbohrer designed for deep, precise metal drilling in Drilling Machines and hand-held drills. Extra-long design for deep holes HSS‑G fully ground for faster, precise drilling 135° tip angle for harder materials Conforms to DIN 1869 for demanding applications High-performance material for demanding Metalwork HSS‑G construction delivers a combination of hardness and cutting-edge geometry that benefits metalworking tasks. The fully ground flute geometry provides sharp cutting edges and high runout accuracy, which results in cleaner holes and less rework. According to internal data, the ground HSS design can enable up to 40% faster drilling while requiring approximately 50% less feed force compared with conventional rolled HSS bits, improving efficiency in production and workshop environments. Built for deep holes and tough materials The extra long overall length of 225 mm with a spiral length of 150 mm makes this Twist Drill especially suitable when access is limited or when long through-holes are needed. The 135° tip angle is optimised for harder materials — it reduces initial biting and shortens approach time into the workpiece, which is advantageous when drilling stainless steel and other high-strength alloys up to 1000 N/mm². Precision geometry and recommended usage The fully ground (CNC‑ground) flute and shank ensure high concentricity and precise hole quality, which is particularly important for metal and hard-plastic applications. Ground Twist Drills are sharper and generally produce superior surface finish; however, they can be relatively more brittle than rolled types. For best results, use the MetavCUT Twist Drill in stationary Drilling Machines with appropriate cooling and controlled feed to extend tool life. Typical applications and target users This Twist Drill is intended for professional machinists, maintenance technicians and metalworking shops that require reliable deep-hole performance. It is suitable for legierte und unlegierte Stahl (alloyed and unalloyed steel), Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle and hard plastics. The Extra Long design supports drilling operations where standard-length bits are insufficient, while the DIN 1869 specification assures compatibility with industrial production standards. Highly recommended: Choose the MetavCUT Twist Drill for deep, precise metal drilling — contact METAV Werkzeuge for expert technical advice via email info@metav-werkzeuge.com, by phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 34025-FDA Diameter: 2.5 mm Tip angle: 135° Overall length: 225 mm Spiral length: 150 mm Execution: extra long Colour/Finish: bright finished Shank execution: fully ground Material: HSS‑G Standard: DIN 1869 For machine: Drilling Machine / Hand Drills Application: Drills for metal Model series: Standard Line Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Is the MetavCUT Twist Drill suitable for stainless steel and high-strength alloys? The MetavCUT Twist Drill is designed to machine materials such as stainless steel and other high-strength alloys up to around 1000 N/mm²; its 135° tip and HSS‑G ground geometry help reduce drilling forces and improve centring in tougher materials. Can the MetavCUT Twist Drill be used in a hand-held drill? The MetavCUT Twist Drill can be used in hand-held drills for lighter tasks, but optimal performance and tool life are achieved in a stationary Drilling Machine with adequate clamping and coolant due to the Extra Long design and ground geometry. What is a Twist Drill used for? A Twist Drill is mainly applied to the machining of high-strength materials and larger drill diameters; its ground geometry is easy to re‑sharpen and resists heavier loads, making it suitable for demanding metal drilling. Which three drill types exist? The three main drill categories are metal drills, wood drills, and stone/concrete drills. Why are Twist Drills sharpened? Sharpening reduces the cross‑edge at the drill point; by re‑pointing the tip, frictional forces are substantially lowered so that less feed force is needed and the drill centres more accurately in the workpiece. Can you drill wood with a Twist Drill? A metal Twist Drill can be used in wood, but guidance and finish are generally inferior compared with dedicated wood drills; metal bits are easier to re‑sharpen and have less self‑feeding tendency. For which drilling depths is the Twist Drill most commonly used? A through-hole in solid material is typically made with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The common belief that HSSE is automatically superior to HSS is not universally correct; assess the working conditions to determine whether the higher cost of HSSE is justified for your application.
2.5mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill — Type N extra short, Ø 2.5 mm, 118° tip, Bright Finished, HSS‑G, DIN 1897 (MetavCUT) The Twist Drill is an extra short Type N drill designed for metalworking with a 2.5 mm Diameter and a 118° Tip Angle, suitable for Hand Drilling Machines and compact operations. Extra short design for high stability and tight spaces Ground HSS‑G for up to 40% faster drilling Cylindrical Shank for universal chuck compatibility Conforms to DIN 1897 for consistent quality Optimised for metal drilling and thin sheet applications Precise metalworking with higher feed efficiency The extra short design of this Twist Drill delivers noticeably improved Stability and reduced breakage risk when compared with standard-length tools. The Ground HSS‑G cutting geometry reduces required Feed Force and increases Penetration Speed, so holes in alloyed and unalloyed Steel, Cast Iron and Non‑Ferrous Metals are produced more reliably. For users who require controlled drilling in limited access areas, the shortened Overall Length improves handling and reduces vibration while maintaining concentricity. Material advantages and drilling behaviour Manufactured from HSS‑G, the tool offers robust wear resistance and edge retention for demanding metal operations. The 118° Tip Angle favours softer metals and provides easier centring on curved surfaces, while the classic Type N flute geometry is optimised for chip evacuation in metalworking. The Cylindrical Shank ensures universal compatibility with standard three‑jaw chucks, although users should note increased slippage risk under very high torque compared with hex or triangular shanks. Ideal applications and target users This drill is aimed at professionals and hobbyists working with sheet metal, profile sections and machine components where compact tooling and precise results matter. It excels in Hand Drilling Machine use and is suitable for drilling into Steel, Cast Steel, Sintered Iron and various Hard Plastics. For projects requiring repeatable and centred holes in thin materials or confined setups, the shortened geometry provides a clear advantage and reduces the chance of deflection. Handling tips and what makes this drill stand out To achieve best results, use moderate cutting speeds and steady feed; lubrication is recommended for alloyed steels to extend tool life. The Extra Short format reduces bending moments and is therefore less prone to runout, while the DIN 1897 conformity guarantees dimensional and geometric consistency. The product’s Bright Finished surface supports easy identification and corrosion resistance during storage. For precision metal drilling, choose the MetavCUT Twist Drill Type N with 2.5 mm Diameter and extra short design — METAV Werkzeuge provides expert technical advice and support: info@metav-werkzeuge.com, Tel +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill (Twist Drill / Spiralbohrer) Brand: MetavCUT SKU: 56025-FDA Diameter: 2.5 mm Tip Angle: 118° Type: Type N Material: HSS‑G Execution: Extra short Colour / Finish: Bright Finished Shank Design: Cylindrical Spiral Length: 14 mm Overall Length: 43 mm Series: Standard Line Application: Drills for Metal For use with: Drilling Machine (Hand Drilling Machine) Standard: DIN 1897 Additional note: Extra short length increases stability and is suitable for thin materials and tight spaces Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N mainly used for? The MetavCUT Twist Drill Type N is primarily applied to the machining of high‑strength workpieces and larger hole diameters; its robust geometry and grind make it suitable for alloyed and unalloyed steels, cast materials and hard plastics while resisting higher loads. Which three drill types exist? Commonly distinguished drill types are Metal Drills, Wood Drills and Stone/Concrete Drills; the MetavCUT Twist Drill Type N belongs to the Metal Drill category and is tailored to metalworking tasks. Why are Twist Drills sharpened at the point? The point sharpening reduces the cross‑edge at the tip of the Twist Drill, which lowers friction and required feed forces while improving centring accuracy in the Workpiece. Can a metal Twist Drill be used for wood? A Metal Drill can be used in Wood, but guidance and finish are usually inferior compared with dedicated Wood Drills; however, Metal Drills are easier to re‑sharpen and have lower self‑feeding tendency. For which drilling depths is the Twist Drill most used? A full‑bore operation is commonly executed with a Twist Drill. For diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most frequently used tool.
2.5mm HSS-G Twist Drill DIN 338 ,fully ground, silver - MetavCUT
Twist Drill — fully ground HSS‑G, 2.5 mm, 118°, hexagonal shank, silver, DIN 338, MetavCUT The Twist Drill is a fully ground HSS‑G drill bit designed for precision metalworking on drilling machines, offering a 2.5 mm diameter and a 118° point angle for reliable centring and clean holes. Fully ground HSS‑G for precise metal holes Hexagonal shank for form‑fit torque transfer DIN 338 compliant short twist drill 118° point angle improves centring on curves 80 mm overall length for versatile reach Precision and material: why fully ground HSS‑G matters A fully ground HSS‑G construction ensures very sharp cutting edges and high runout accuracy, which produces cleaner, more precise holes in metals. For users working with alloyed or unalloyed steel, cast steel, and non‑ferrous metals, the combination of ground geometry and HSS‑G material delivers faster drilling and reduced required feed force compared with roll‑formed variants. For the occasional user, this means fewer torn edges and less rework; for professionals, it supports higher reproducibility on production parts. Shaft design and practical handling benefits The hexagonal shank (hexagon shaft) enables secure engagement in quick‑change holders and many cordless drivers without slipping, improving torque transfer and reducing downtime for bit changes. Because the shank is form‑fitting, operators experience more consistent cutting behavior when using hand drills or drilling machines. This design choice is particularly useful when working on jobs that require rapid tool swaps and firm rotational control. Geometry and recommended applications for cleaner holes With a 118° point angle, this twist drill penetrates softer metals and aluminium more easily and centres well on slightly curved surfaces. The geometry also supports typical metalworking tasks where entry burr and hole roundness are important. For drilling in harder materials or when drilling deep, consider matching coolant use and reduced speeds to prolong tool life and avoid brittle breakage typical of very sharp ground drills. Versatility and intended users This bit suits metalworkers, maintenance technicians, and workshop professionals who require reliable, repeatable results in light‑to‑medium metal drilling. The 2.5 mm diameter and 80 mm overall length provide a balance between reach and rigidity, making the bit practical for general fabrication and repair work. Users seeking simple, serviceable tooling will appreciate that the bit can be re‑sharpened and is compatible with standard holders and many drill chucks. How the DIN standard and grinding process support quality Conforming to DIN 338 signals that the geometry and dimensions meet established standards for short twist drills with cylindrical shanks. The term "fully ground" means the flute geometry is produced by CNC grinding rather than roll forming, which typically results in superior concentricity and sharper edges. For customers unfamiliar with these terms: grinding produces a more accurate cutting profile, while DIN 338 guarantees standardized dimensions and interchangeability. Choose MetavCUT’s Twist Drill in fully ground HSS‑G for demanding metalwork — for detailed technical advice or help selecting the right diameter and geometry, contact METAV Werkzeuge for expert consultation at info@metav-werkzeuge.com or +49 2822 7131930 (WhatsApp +49 170 2837271). Technical Data Designation: Twist Drill (Spiralbohrer) Marke: MetavCUT SKU: 57025-FDA Diameter: 2.5 mm Point angle: 118° Execution / Finish: fully ground (geschliffen) Colour: silver Intended for: Drilling Machine (Handbohrmaschine) Spiral length: 30 mm Overall length: 80 mm Shank design: hexagonal (sechskant) Series: Standard Line Application: Drills for metal (Bohrer für Metall) Material: HSS‑G Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which brand supplies this bit? The MetavCUT Twist Drill (Twist Drill for Drilling Machine) is primarily used for machining high‑strength materials and larger drill diameters; its ground flute geometry makes it easier to sharpen and able to withstand greater loads, delivering precise, clean holes in metalworking tasks. Which three drill types exist and how does the MetavCUT Twist Drill fit among them? The main drill categories are metal drills, wood drills, and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for steels and other metals rather than masonry or specialised wood bits. Why are Twist Drills pointed (why is the tip ground)? The tip of the Twist Drill by MetavCUT is sharpened to reduce the chisel edge at the centre; this lowers friction and required feed forces while improving self‑centring in the workpiece for a cleaner start and better hole accuracy. Can a metal Twist Drill be used in wood? A MetavCUT metal Twist Drill can be used in wood, but it offers less guidance and a rougher finish than dedicated wood bits; however, it is easier to resharpen and tends to have a lower tendency to self‑feed compared with some wood‑specific designs. For which drilling depths is the Twist Drill most commonly used? A through hole produced with a Twist Drill is common up to a diameter of about 20 mm and drilling depths up to 100 mm; in such ranges the Twist Drill is the most frequently used tool for metal removal. Is HSS or HSSE better for my application? Choosing between HSS and HSSE depends on working conditions; the general belief that HSSE is always superior to HSS is incorrect. Assess whether your operating conditions justify the higher cost of HSSE before deciding; the MetavCUT Twist Drill in HSS‑G offers a strong balance of performance and economy for many metalworking tasks.
2.5mm HSS-G Twist Drill DIN 338 ,left cutting - MetavCUT
Twist Drill (Left-cutting) 2.5 mm — HSS‑G, 135° | MetavCUT Profi Line The Twist Drill by MetavCUT is a left-cutting HSS‑G drill designed for metalworking and targeted screw-extraction tasks when using a drilling machine or compatible hand drill. Left-cutting for counterclockwise screw extraction 135° point angle for harder materials HSS‑G construction for heat resistance and durability Conforms to DIN 338 for short shank drills Faster metalworking thanks to left-cutting geometry The left-cutting design of this Twist Drill allows reliable counterclockwise cutting, which is particularly useful when removing broken or seized screws. Because the flute and cutting lip are configured for left rotation, the Tool often reduces the need for additional extraction steps and supports quicker intervention in repair and maintenance. This geometry also contributes to decreased thrust forces, so drilling becomes more controlled and efficient. Robust HSS‑G material for sustained performance Manufactured from HSS‑G, the drill offers improved heat resistance and wear behaviour compared with standard high-speed steels. This ensures longer tool life under continuous use and when tackling tougher Alloys. Users benefit from consistent cutting performance and reduced tool changes, which is valuable in production runs or workshop environments where downtime impacts throughput. Optimised for harder metals with a 135° point angle A 135° point angle is tailored for entry into harder Materials such as Stainless Steel and other alloys, reducing walking and improving centring on difficult surfaces. For less experienced operators: the point angle describes how steep the tip is—larger angles penetrate more gradually and are better suited to hard Substrates, whereas sharper angles are used for softer Materials. This feature helps achieve cleaner holes and more predictable results when working with metal. Engineered to industry standard DIN 338 for consistent compatibility Conforming to DIN 338 means the product meets established dimensions and tolerances for short shank twist drills, simplifying tool selection and machine setup. Workshops can rely on predictable shank fit and tool behaviour across machines. The Profi Line execution reflects a focus on practical workshop use, where reproducibility and interchangeability matter for efficient tool management. Strong recommendation: Choose MetavCUT for demanding metalwork—contact METAV Werkzeuge for expert advice and personalised support via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 60025-FDA Diameter: 2.5 mm Point Angle: 135° Material: HSS‑G Execution: left-cutting Suitable for: Drilling Machine / Hand Drill Model Series: Profi Line Application: Drills for Metal Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for and in which situations is the MetavCUT Twist Drill particularly suitable? Twist Drills like the MetavCUT Twist Drill are primarily used for metalworking and are especially effective when machining high‑strength Materials or when extracting broken screws; the left-cutting variant is designed to cut when the spindle runs counterclockwise, aiding screw removal and reducing required feed force. Which three drill types are commonly distinguished and where does the MetavCUT Twist Drill fit in? The three main categories are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for use in metalworking applications.
2.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Type N — 2.5 mm, 135° | Short HSS‑G, Bright Finished (DIN 338) The Twist Drill Type N is a short, fully ground HSS‑G drill designed for precision metal drilling in Drilling Machines and Hand Drills. Short design for greater stability 2.5 mm diameter for precise holes HSS‑G: faster drilling, lower thrust 135° tip for hard materials like stainless steel Conforms to DIN 338 for short twist drills High performance: faster drilling with less effort This HSS‑G short Twist Drill delivers measurable efficiency: the ground HSS geometry permits up to 40% faster drilling and requires about 50% less thrust compared with conventional HSS drills. That translates into reduced operator fatigue and improved cycle times in repetitive metalworking tasks. The combination of fully ground shank and short overall length enhances torque transfer, so each drilling operation becomes noticeably more effective. Built for stability and precision in metalworking A short Twist Drill manufactured to DIN 338 offers superior rigidity thanks to a reduced overhang. This stability minimises deflection and supports accurate, repeatable hole placement when working with steels, cast materials and non‑ferrous metals. The reduced cantilever length is particularly advantageous in tight setups or when drilling on portable machines where control and concentricity are critical. Tip geometry and material explained for better results The 135° tip angle is selected for harder materials; a larger point angle reduces initial cutting pressure and improves performance in stainless and tempered steels. Type N denotes the normal spiral suited for metal drilling. If unfamiliar with terms: HSS‑G means high‑speed steel, ground finish — a material and manufacturing style that balances toughness with sharp cutting edges and makes resharpening straightforward when needed. Who benefits and typical applications Workshops, maintenance teams and precision fabricators benefit most from this short Twist Drill. It is optimised for Drilling Machines and Hand Drills when high rigidity and clean hole quality are required. Typical uses include drilling in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, tempered components, non‑ferrous metals and hard plastics where tool life and hole accuracy matter. Strong recommendation: choose the MetavCUT HSS‑G Twist Drill for demanding metalworking tasks and contact METAV Werkzeuge for expert advice — Email: info@metav-werkzeuge.com · Tel: +49 2822 7131930 · WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 27025-FDA Diameter: 2.5 mm Point angle: 135° Type: Type N Material: HSS-G Norm: DIN 338 Execution: short Spiral length: 30 mm Overall length: 57 mm Shank finish: fully ground Colour / Finish: bright finished Suitable for: Drilling Machine / Hand Drill Model series: Basic Line Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill by MetavCUT used for? The Twist Drill from MetavCUT is primarily applied to the machining of high‑strength materials and larger drill diameters; its design is robust and easy to resharpen, allowing it to withstand greater loads while maintaining performance. Which 3 drill types exist? Commonly distinguished drill types are Metal Drill, Wood Drill and Masonry/Concrete Drill. These categories reflect typical geometry and tip design optimised for each material group. Can the MetavCUT Twist Drill be used in a handheld drill? Yes, the MetavCUT Twist Drill (Type N) can be used with Hand Drills; however, its short design and HSS‑G material make it best suited to applications where greater stability and controlled feed are possible for clean, accurate holes.
2.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Der kurze Spiralbohrer von MetavCUT kombiniert HSS‑G‑Material und DIN‑338‑Norm für hohe Stabilität und saubere Bohrbilder. Die kurze Ausführung reduziert Auslenkung, ermöglicht präzise Bohrungen in Stahl und Guss und spart durch optimierte Geometrie Zeit und Kraft bei der Zerspanung. Spiralbohrer — kurzer HSS‑G Metallbohrer (Profi Line) Der Spiralbohrer ist ein kurzer, geschliffener HSS‑Bohrer nach DIN 338 für präzise Metallbohrungen an stationären und handgeführten Maschinen. Stabiler Kurzbohrer für präzise Ergebnisse HSS‑G geschliffen für scharfe Kanten Geeignet für legierten und unlegierten Stahl Kurze Auskraglänge reduziert Vibrationen Passend für Handbohrmaschine und Maschinenbetrieb Stabile Ausführung für exakte Bohrungen Kurze Spiralbohrer mit geringer Auskraglänge bieten deutlich mehr Steifigkeit als lange Varianten. Die reduzierte Auslenkung sorgt für gleichmäßigere Bohrbilder und bessere Rundlaufgenauigkeit, was gerade bei Durchmessern im Standard‑Bereich entscheidend ist. Die geschliffene Schaftgeometrie trägt zu sauberer Spanabfuhr und reproduzierbaren Ergebnissen bei, wodurch Nacharbeit und Maßabweichungen minimiert werden. Besonders bei stationären Maschinen amortisiert sich die höhere Präzision schnell. Effizienz durch optimierte Geometrie und geringere Anpresskraft Die spezielle Geometrie des Kurzbohrers ermöglicht ein bis zu 40 % schnelleres Bohren bei gleichzeitig 50 % weniger Anpresskraft gegenüber konventionellen HSS‑Bohrern. Diese Kombination reduziert Maschinenbelastung und erhöht den Durchsatz bei Serienarbeiten. Für Anwender bedeutet das: kürzere Bearbeitungszeiten und weniger Wärmeentwicklung im Bohrbereich, sofern geeignete Kühlschmierstoffe verwendet werden. Die Wirtschaftlichkeit ergibt sich insbesondere bei häufigen Bohrzyklen in Stahl. Vielfältige Materialeignung für metallische Werkstoffe Metallische Werkstoffe wie legierter Stahl, unlegierter Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff können mit diesem Bohrer zuverlässig bearbeitet werden. Der Typ N mit Normalspirale ist speziell für Metall optimiert und bietet eine ausgewogene Spanformung. Anwender, die regelmäßig in wechselnden Werkstoffen bohren, profitieren von der universellen Einsetzbarkeit und der Normierung nach DIN 338, die Fertigungs‑ und Austauschbarkeit sichert. Empfehlungen für den Einsatz und Maschinenkompatibilität Empfohlen wird die Verwendung auf stationären Säulenbohrmaschinen oder stabilen Handbohrmaschinen mit gutem Rundlauf. Vorzentrieren bei hoher Präzision reduziert Wandern beim Anbohren. Zur Standzeitverlängerung empfiehlt sich Kühlung bei hohen Schnitttiefen und die Nutzung passender Spannfutter mit sauberem Rundlauf. Die kurze Länge erlaubt sicheren Einsatz auch bei beengten Zugängen und minimiert das Risiko von Bruch durch Biegung. MetavCUT Spiralbohrer Profi Line SKU 48025‑FDA für präzise Metallbohrungen einsetzen und Bearbeitungsqualität sofort steigern — Beratung per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 48025-FDA Marke: MetavCUT Serie: Profi Line Bezeichnung: Spiralbohrer Fakten Durchmesser: 2,5 mm Gesamtlänge: 57 mm Spirallänge: 30 mm Spitzenwinkel: 118° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Geschliffen) Schaftausführung: geschliffen Norm: DIN 338 Ausführung: kurz Typ: Typ N Für Bohrmaschine: Handbohrmaschine Farbe: blank (bright finished) Anwendung: Bohrer für Metall FAQ Für welche Materialien eignet sich der Spiralbohrer am besten? Der MetavCUT Spiralbohrer Profi Line SKU 48025‑FDA ist besonders geeignet für legierten und unlegierten Stahl, Gussstahl und Nichteisenmetalle; durch die geschliffene HSS‑Geometrie lassen sich zudem Hartkunststoffe sauber bearbeiten. Ist der kurze Spiralbohrer für Handbohrmaschinen geeignet? Ja, die kurze Ausführung wurde so konzipiert, dass sie auch auf Handbohrmaschinen mit gutem Rundlauf eingesetzt werden kann; bei höherer Präzision empfiehlt sich zusätzliches Zentrieren vor dem Anbohren. Wie wirkt sich der Spitzenwinkel von 118° aus? Der Spitzenwinkel von 118° bietet eine gute Balance für Metallbearbeitung und erleichtert das Eindringen in weichere Metalle; bei sehr harten Werkstoffen kann ein kleinerer Winkel sinnvoll sein. Welche Vorteile bietet die geschliffene Schaftausführung? Die geschliffene Schaftausführung (HSS‑G) sorgt für sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, was zu saubereren Bohrlöchern und besserer Maßhaltigkeit führt.
2.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated - MetavCUT
MetavCUT Twist Drill (Short) — 2.5 mm, 118° Tip, HSS‑G, TIN‑coated, Fully Ground, DIN 338 The short MetavCUT Twist Drill is a precision metalworking tool for Drilling Machines, designed for stable, fast and clean holes in alloyed and unalloyed metals. Short design for increased stability and precision TIN‑coated surface for reduced wear and friction Fully ground shank for high concentricity and clean holes Complies with DIN 338 for short HSS Twist Drills Optimised for metal drilling with 118° tip angle Greater stability and accurate results for metalworking Shorter overall length reduces overhang and significantly improves stability during machining. The compact geometry of this short Twist Drill minimises bending and vibration, enabling more precise hole positions and better surface finish. For operators who demand repeatable accuracy, the reduced deflection means lower scrap rates and faster setup, particularly when working on hardened or alloyed metals. Coating and material that extend service life The combination of HSS‑G substrate and a TIN‑coated surface reduces friction and wear during cutting, especially under lubrication or coolant. This coating lowers thermal load at the cutting edges and helps maintain sharpness over longer production runs, which translates into longer tool life and fewer tool changes. For users machining Copper, Bronze or Tempered Steel, the TIN layer improves durability and process stability. Precision shank and geometry for clean holes A fully ground shank and CNC‑ground flute geometry produce sharp cutting edges and excellent concentricity. The ground design enables up to 40% faster penetration with about 50% less feed force compared with conventional HSS drills, resulting in cleaner bores and reduced torque on handheld or stationary Drilling Machines. This is advantageous when tight tolerances and high repeatability are required. Engineered to standards and practical applications Designed to DIN 338, this short Twist Drill follows established dimensional and manufacturing criteria for short cylinder‑shank HSS drills. The 118° tip angle is suitable for many common metals and softer materials where easier centring is beneficial. Typical applications include precision component manufacture, toolroom operations and general metal fabrication where controlled entry and minimal wander are important. Who benefits from this short Twist Drill Manufacturers, maintenance workshops and precision trade shops will appreciate the tool’s combination of rigidity and wear resistance. The design suits both bench‑mounted and portable Drilling Machines used for small to medium diameters. For users needing reliable, easy‑to‑regrind drills with predictable behaviour under coolant, this tool offers a balanced solution. We recommend the robust MetavCUT short Twist Drill for precision metal drilling — for technical advice or to confirm suitability for your application, contact METAV Werkzeuge: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 28025-FDA Diameter: 2.5 mm Overall length: 57 mm Spiral length: 30 mm Tip angle: 118° Material: HSS‑G Execution: Short Shank finish: fully ground Coating/Colour: TIN‑coated Application: Drills for metal Suitable for: Drilling Machine Model series: Basic Line Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill short used for? The MetavCUT Twist Drill short is primarily used for precision drilling in high‑strength and general metals. This short Twist Drill excels where stability and minimal deflection are needed; it is suitable for alloyed and unalloyed steel, cast iron, copper, bronze and hard plastics, delivering clean, accurate holes even under demanding conditions. Which three drill types exist? In general drilling practice the main categories are Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Twist Drill belongs to the Metal drills group and is optimised for machining metals with appropriate coolant and correct feed rates. Why are Twist Drills sharpened? Sharpening reduces the cross‑edge at the tip, which lowers friction and therefore the necessary feed force. For the MetavCUT Twist Drill, proper tip geometry improves centring in the workpiece and reduces cutting resistance, resulting in easier drilling and better hole quality. Are you unsure whether this tool meets your requirements or need further technical data? METAV Werkzeuge offers comprehensive expert advice — contact us at info@metav-werkzeuge.com, call +49 2822 7131930 or message via WhatsApp +49 170 2837271.
2.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill — Short Type N, 2.5 mm, 118°, TiN-coated HSS-G (DIN 338) by MetavCUT The Twist Drill is a short Type N metalworking drill designed for precision drilling in alloys and steels with a 2.5 mm diameter and a 118° point angle. Short design for greater stability and precision TiN-coated surface for extended tool life Fully ground HSS-G for faster cutting and clean holes Conforms to DIN 338 for consistent quality Optimised for Drilling Machine applications Precision and stability for demanding metalwork The short geometry of this Twist Drill reduces the unsupported overhang, resulting in higher stability and less tendency to deflect under load. This design advantage makes it particularly suitable for precision work and for drilling in hard materials such as alloyed steel and tempered castings. The 118° point angle supports accurate centring on slightly convex surfaces and improves initial penetration, which is beneficial when accurate positioning is critical. Longer lifetime through coating and material A TiN-coated surface combined with HSS-G substrate reduces friction and wear during cutting, increasing service life under metalworking conditions. Titanium nitride lowers adhesion of chips and heat buildup, while the fully ground HSS geometry delivers sharper cutting edges and improved chip evacuation. Together these properties help maintain performance over many holes when used with appropriate cooling. Faster drilling with lower feed force The ground flute geometry of this short Twist Drill enables up to 40% faster drilling and requires significantly less axial force compared with conventional HSS types. This leads to smoother operation on both stationary and portable drilling machines and reduces operator fatigue. For best results, pairing the drill with suitable coolant or cutting fluid minimises thermal stress and preserves cutting geometry. Application scope and recommended usage Designed to meet DIN 338, this short Type N Twist Drill is intended primarily for metalworking tasks such as drilling in alloy and unalloyed steels, cast iron, sintered iron, non-ferrous metals and hard plastics. Use in a drilling machine with correct speeds and lubrication is advised. Because the drill is ground rather than rolled, expect very precise hole quality and good concentricity, while taking care to avoid excessive impact loading to prevent brittle fracture. Strongly recommended: choose the MetavCUT Twist Drill for professional metalworking tasks and contact METAV Werkzeuge for tailored technical support — 📧 info@metav-werkzeuge.com | ☎️ +49 2822 7131930 | ✔️ WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 46025-FDA Diameter: 2.5 mm Overall length: 57 mm Spiral length: 30 mm Point angle: 118° Type: Type N Execution: Short Shaft design: Fully ground Material: HSS-G Coating/Colour: TiN-coated Application: Drills for metal / Drilling Machine Model series: Standard Line Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit this MetavCUT Twist Drill Type N? The MetavCUT Twist Drill Type N is used mainly for drilling metal; it is especially suited to alloyed and unalloyed steel, cast iron, sintered iron, non-ferrous metals and hard plastics. Its short construction and HSS-G substrate make it appropriate for precise metalworking where stability and hole quality are priorities. Which three drill types exist and how does the Twist Drill compare? The three common drill types are metal drills, wood drills and masonry/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking, offering sharper ground geometry and TiN coating compared with general-purpose wood or masonry drills.
2.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Der kurze Spiralbohrer verbindet hohe Stabilität, schnelle Spanabfuhr und verschleißarme TiN-Beschichtung zu einer wirtschaftlichen Lösung für die Metallbearbeitung; Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT, HSS-G, kurze Ausführung Der Spiralbohrer eignet sich als kurzes, stabil geführtes Werkzeug für präzise Bohrungen in Stahl und Nichteisenmetallen bei Werkstatt- und Montagearbeiten. Kurze Ausführung für höhere Stabilität TiN-Beschichtung reduziert Verschleiß Geschliffener HSS-G für präzise Bohrungen Geeignet für Handbohrmaschine und stationäre Maschine DIN 338-konforme Fertigung und Abmessung Hohe Stabilität durch kurze Auskraglänge Die kurze Ausführung sorgt für deutlich verminderte Auslenkung und damit für höhere Präzision bei der Bohrung. Gerade bei engen Toleranzen und kleiner Bohrtiefe erhöht die reduzierte Auskraglänge die Rundlaufgenauigkeit und verringert das Risiko von Ausbrechen oder Wanderung bei dünnen Kanten. Das Ergebnis sind sauberere Bohrungen und geringerer Nacharbeitaufwand für Werkstatt und Produktion. Beschichtung und Material verlängern die Standzeit Der Einsatz von HSS-G in Verbindung mit einer TiN-Beschichtung reduziert Reibung und thermischen Verschleiß beim Arbeiten in harten Werkstoffen. Durch die Kombination aus geschliffener Geometrie und Hartstoffbeschichtung steigt die Lebensdauer des Werkzeugs, insbesondere bei Nutzung eines geeigneten Kühlsystems. Diese Eigenschaften sorgen für gleichbleibende Bohrergebnisse und weniger Werkzeugwechsel in längeren Fertigungsserien. Vielseitigkeit bei Metallwerkstoffen Das Werkzeug ist ausgelegt für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen sowie Kupfer, Bronze und Hartkunststoff. Die normale Spirale (Typ N) gewährleistet sichere Spanabfuhr bei typischen Metallbearbeitungen und ermöglicht zuverlässige Ergebnisse in gängigen Werkstattanwendungen. Für spezielle Werkstoffe empfiehlt sich die Anpassung von Schnittgeschwindigkeit und Kühlung. Praxisempfehlungen für sichere Anwendung Bei Einsatz mit Handbohrmaschine oder stationärer Maschine empfiehlt sich Anpunkten mit einem Zentrierbohrer bei hoher Präzision. Die Spitzenwinkel von 118° sind universell einsetzbar, eignen sich besonders für weichere bis mittelharte Werkstoffe und bieten guten Zentrieraufschlag. Kühlung oder Schneidöl verlängern die Standzeit und reduzieren Wärmebildung bei längeren Bohrungen. Vorteile geschliffener Fertigung und Leistungsvorsprung Die geschliffene Schaftausführung führt zu scharfen Schneiden und hoher Rundlaufgenauigkeit, was saubere Bohrbilder fördert. Der geschliffene HSS-G Bohrer ermöglicht nach Herstellerangaben bis zu 40 % schnelleres Bohren bei gleichzeitig 50 % geringerer Anpresskraft verglichen mit herkömmlichen HSS-Ausführungen. Diese Effizienzvorteile reduzieren Bearbeitungszeit und körperliche Belastung in der Werkstatt. Zielgruppe und Einsatzszenarien Das Werkzeug richtet sich an Handwerk, Instandhaltung und industrielle Werkstätten, die präzise Metallbohrungen mit hoher Wiederholgenauigkeit benötigen. Stationäre Bohrmaschinen und robuste Handmaschinen profitieren gleichermaßen von der kurzen Ausführung; für sehr tiefe Bohrungen oder Hochleistungsserien in gehärtetem Stahl sind spezialisierte Lösungen zu prüfen. Empfehlung: Entscheiden Sie sich für den MetavCUT Profi Line Spiralbohrer zur effizienten und präzisen Metallbearbeitung; bei Fragen steht Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 bereit Produktmerkmale Artikelnummer: 41025-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Profi Line Norm: DIN 338 Fakten Durchmesser: 2,5 mm Gesamtlänge: 57 mm Spirallänge: 30 mm Spitzenwinkel: 118° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Oberfläche: TiN-Beschichtung (Verschleißreduzierung) Schaftausführung: geschliffen (CNC-Schliff für hohe Rundlaufgenauigkeit) Typ: Typ N (Normalspirale) Ausführung: kurz (reduzierte Auskraglänge) Für Bohrmaschine: Handbohrmaschine FAQ Welche Werkstoffe kann der Spiralbohrer von MetavCUT bearbeiten? Der MetavCUT Profi Line Spiralbohrer ist für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen sowie Kupfer, Bronze und Hartkunststoff geeignet und liefert in diesen Werkstoffen zuverlässige Ergebnisse. Wie beeinflusst die TiN-Beschichtung die Lebensdauer? Die TiN-Beschichtung des MetavCUT Spiralbohrers reduziert Reibung und thermischen Verschleiß, wodurch sich die Standzeit erhöht und die Werkzeugwechselhäufigkeit in längeren Fertigungsprozessen sinkt. Ist die kurze Ausführung für Handbohrmaschinen geeignet? Ja, die kurze Ausführung des Spiralbohrers eignet sich gut für Handbohrmaschine und stationäre Maschine, weil die reduzierte Auskraglänge die Stabilität verbessert und die Rundlaufgenauigkeit erhöht. Welche Vorteile bietet die geschliffene HSS-G-Ausführung? Die geschliffene HSS-G-Ausführung des MetavCUT Profi Line Spiralbohrers erzeugt schärfere Kanten und besseren Rundlauf, was zu saubereren Bohrlöchern und effizienterem Bohren führt. Welche SKU hat dieses Produkt und wo ist es normiert? Der Spiralbohrer von MetavCUT ist unter der SKU 41025-FDA gelistet und entspricht der Norm DIN 338.
2.5mm HSS-G Twist Drill DIN 338 - MetavCUT
Data conflict detected — inconsistent shaft information The provided product data contains contradictory details about the shank: the field "shaft_ausfuhrung" states "without multi-bevel cutting edge and triangular shank", while the product description (axite_enrichment) repeatedly refers to a "3-Kant Schaft" (triangular shank). This inconsistency raises concerns about the accuracy of the product specifications and could potentially lead to confusion for customers seeking precise information about the item. It is essential to resolve this discrepancy to ensure that all product details align correctly. Cannot generate a reliable product description until the shank/shaft information is clarified and confirmed to avoid any misunderstandings or misrepresentations in the product listing.
2.5mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Der Spiralbohrer von MetavCUT kombiniert HSS-G-Material, geschliffene Schaftgeometrie und die lange Ausführung nach DIN 340 zu einem zuverlässigen Werkzeug für tiefe Metallbohrungen; er ermöglicht schnelleres Arbeiten bei geringer Anpresskraft und bietet gleichzeitig hohe Rundlaufgenauigkeit. Bestellen Sie über Metav Werkzeuge oder nutzen Sie unsere Beratung, wenn Sie technische Details klären möchten. Spiralbohrer 2,5 mm – MetavCUT Standard Line Der Spiralbohrer in langer Ausführung nach DIN 340 ist für präzise Metallbohrungen konzipiert und eignet sich besonders für tiefere Bohrungen und schwer zugängliche Bohrstellen. Spiralbohrer 2,5 mm für präzise Metallbohrungen HSS-G geschliffen für saubere Bohrlöcher Lange Ausführung nach DIN 340 für tiefe Bohrungen Gesamtlänge 95 mm mit Spirallänge 62 mm Spitzenwinkel 118° ideal für allgemeine Werkstoffe Materialqualität für saubere und präzise Bohrungen Die Verwendung von HSS-G (geschliffen) sorgt für sehr scharfe Schneidkanten und eine hohe Rundlaufgenauigkeit, was zu saubereren Bohrlöchern in Stahl und Guss führt. Durch den CNC-Schliff reduziert sich die Reibung beim Eindringen, sodass sich die Bohrgeschwindigkeit erhöht und die benötigte Anpresskraft sinkt. Dieser Vorteil macht das Werkzeug besonders geeignet für Werkstätten, die Wert auf gleichbleibende Bohrbildqualität legen. Tiefe Bohrungen sicher und kontrolliert ausführen Die lange Ausführung gemäß DIN 340 mit einer Spirallänge von 62 mm und einer Gesamtlänge von 95 mm ermöglicht das Erreichen von tieferen Bohrpunkten und innenliegenden Bohrstellen ohne aufwändiges Umspannen. Anwender profitieren von besserer Zugänglichkeit bei Durchbrüchen und Bohrbuchsen. Für stabile Ergebnisse empfiehlt sich die Nutzung mit angemessener Kühlung und gegebenenfalls stationärer Maschine, um Bruchrisiken zu minimieren. Vielseitige Einsatzgebiete und kompatible Werkstoffe Im Standard-Bereich bietet dieser Bohrer Flexibilität für Werkstattarbeiten, Montage und DIY-Projekte; geeignet sind legierte und unlegierte Stähle, Gusseisen, Temperguss, Sintereisen, Nichteisenmetalle sowie Hartkunststoffe. Der Bohrer lässt sich mit Handbohrmaschine oder stationärer Säule einsetzen, wobei bei hoher Präzision ein Vorzentrieren die besten Ergebnisse liefert. So profitieren sowohl Profi-Handwerker als auch ambitionierte Heimwerker von der Vielseitigkeit. Handhabung, Schutz und Pflegetipps für längere Lebensdauer Da der Bohrer geschliffen ist, sind die Schneiden sehr fein und damit anfälliger für Bruch bei unsachgemäßer Benutzung; moderate Drehzahlen, kontinuierliche Kühlung und kontrollierter Vorschub verlängern die Standzeit merklich. Ein Zentrierbohrer hilft bei präzisen Passungen, und die Lagerung in einer schützenden Verpackung verhindert Kantendefekte. Diese einfache Pflege sorgt für dauerhafte Performance und konstante Bohrergebnisse. Empfehlen Sie den Einsatz des Spiralbohrers von MetavCUT für präzise Tiefbohrungen und sichern Sie die Verfügbarkeit über Metav Werkzeuge; bei technischen Fragen erreichen Sie uns per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 53025-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Standard Line Ausführung: lang Fakten Durchmesser: 2,5 mm Gesamtlänge: 95 mm Spirallänge: 62 mm Spitzenwinkel: 118° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (geschliffen) Schaftausführung: geschliffen Norm: DIN 340 (lange Ausführung) Farbe: blank Für Bohrmaschine: Handbohrmaschine Hersteller: MetavCUT Ausführung: lang FAQ Ist der Spiralbohrer für gehärteten Stahl geeignet? Der Spiralbohrer von MetavCUT aus HSS-G ist für legierte und unlegierte Stähle bis zu typischen Einsatzgrenzen geeignet, bei sehr hartem oder gehärtetem Stahl empfiehlt sich jedoch der Einsatz von Vollhartmetallwerkzeugen. Eignet sich der Bohrer für Handgebrauch mit Akkubohrschrauber? Ja, der Bohrer ist für die Nutzung mit Handbohrmaschine und Akkubohrschraubern im Standard-Bereich ausgelegt; bei tiefen Löchern oder hoher Präzision ist jedoch eine stationäre Maschine empfehlenswert. Wie sollte der Bohrer gekühlt werden, um Standzeit zu erhöhen? Kontinuierliche Nasskühlung oder zyklische Schmierung reduziert Wärme und sorgt für längere Standzeiten beim Spiralbohrer von MetavCUT; für die SKU 53025-FDA wird eine moderate Kühlung empfohlen. Brauche ich einen Zentrierbohrer vor dem Einsatz? Für hochpräzise Passungen oder wenn Wandern vermieden werden soll, empfiehlt sich ein Vorbohren mit einem Zentrierbohrer; das verbessert das Ergebnis bei Bohrungen mit dem Spiralbohrer MetavCUT Standard Line. Wie lager ich den Bohrer richtig, um Beschädigungen zu vermeiden? Die Lagerung in der Originalverpackung oder in einer geordneten Bohrerbox schützt die geschliffenen Schneiden; für die SKU 53025-FDA ist eine trockene, saubere Umgebung ideal.
2.6mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS drill, 2.6 mm, 118° tip, black, DIN 338 The Twist Drill Type N is a short HSS metal drill designed for precise work in Drilling Machines and hand-held drills, ideal for accurate holes in steels and non-ferrous metals. Short HSS construction for high stability 2.6 mm diameter for fine, precise holes 118° tip for reliable centring on curved surfaces Conforms to DIN 338 for consistent quality Suitable for Drilling Machine use and metalworking Precise metal drilling with reduced breakage risk Short HSS Twist Drills deliver increased stiffness compared with longer variants, which reduces bending and improves hole accuracy. The 2.6 mm diameter combined with a total length of 57 mm and a spiral length of 30 mm gives a compact overhang that minimises vibration and deflection. For tasks requiring exact hole position—such as assembly, jigs or precision fixtures—this drill provides the mechanical advantage of a short design and the wear resistance of high-speed steel. Better centring and cutting behaviour for everyday workshop use The 118° tip angle of this Twist Drill helps with quick centring on flat and slightly curved surfaces and lowers the tendency to wander during start-up. This characteristic makes the tool particularly suitable when drilling softer steels, aluminium and common non-ferrous alloys. Users benefit from easier handling and more predictable entry behaviour, which reduces rework and speeds up repetitive operations. Designed for metalworkers and precision users Engineered as a classic metalworking solution, the Type N Twist Drill is aimed at professionals and skilled hobbyists who require reliable results with minimal tool deflection. The Type N normal spiral geometry is optimised for machining metal and provides an effective chip evacuation path when paired with appropriate cutting speeds and coolant. This drill is recommended for operations where repeatability and tool life are important. Standard conformity and manufacturing advantages Conforming to DIN 338, the short Twist Drill follows established dimensional and manufacturing standards, ensuring interchangeability and predictable performance. The roll-walzen (rolled) HSS production process improves elasticity and decreases breakage risk for small diameters, making this drill a dependable choice for drilling tasks up to the typical limits for high-speed steel in workshop environments. Strong recommendation: For precision metal drilling, choose the MetavCUT Twist Drill Type N and consult METAV Werkzeuge for customised advice — they provide comprehensive technical support and ordering assistance via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Technical data Designation: Twist Drill Brand: MetavCUT SKU: 40026-FDA Diameter: 2.6 mm Spiral length: 30 mm Total length: 57 mm Tip angle: 118° Material: HSS (High Speed Steel) Type: Type N Execution: Short Colour: Black For: Drilling Machine Application: Drills for metal Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill mainly used? The MetavCUT Twist Drill Type N is mainly used for machining high-strength materials and larger hole diameters in metalworking. Its form allows straightforward sharpening and it withstands higher loads, making it suitable for drilling alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and masonry/concrete drills, and the MetavCUT Twist Drill Type N belongs to the metal drill category designed for metalworking tasks.
2.6mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill — Type N extra-short HSS‑G drill, Ø 2.6 mm, 118° point, bright finished, cylindrical shank, DIN 1897 The Twist Drill Type N is an extra-short HSS‑G drill bit designed for precise metalworking with hand Drilling Machines and tight-space applications. Extra-short design for higher stability HSS‑G material for faster cutting 118° point angle for improved centring Cylindrical shank fits standard three-jaw chucks Conforms to DIN 1897 for consistent dimensions Precision and stability for metalworking that matters This extra-short Twist Drill from MetavCUT is engineered to reduce flex and breakage when working with alloyed and unalloyed steels. The shortened overall length and reduced flute/working length increase stability and torsional resistance, which directly lowers the risk of snap-off during manual drilling. For users who require predictable, repeatable holes in components, the compact geometry delivers a noticeable increase in control and operator confidence. Easier centring and reliable start on curved or soft surfaces With a 118° point angle, the Twist Drill provides gentler penetration and improved centring on softer materials such as aluminium or wood-like substrates when used incidentally. This geometry reduces the tendency to wander on crowned or irregular surfaces, so holes start cleanly with less hand correction. The result is a neater entry hole and less rework, which is particularly valuable for time-sensitive fabrication or assembly tasks. Faster cutting with lower feed force thanks to HSS‑G The HSS‑G construction of this MetavCUT Twist Drill combines high-speed steel properties with ground geometry to enable up to 40% faster drilling and approximately 50% lower feed force compared with conventional HSS bits. This means less operator fatigue on hand-held machines and reduced demands on light-duty motor units, while maintaining performance in materials such as cast iron, tempered steel, non‑ferrous metals and engineering plastics. Universal compatibility and practical use cases Equipped with a cylindrical shank, the bit is universally compatible with standard three-jaw chucks, making it suitable for most bench and hand Drilling Machines. The DIN 1897 designation ensures dimensional conformity for consistent clamping and interchangeability. This Twist Drill is particularly suitable for thin-walled constructions like sheet metal, profiles and assemblies where space constraints demand a short tool that still offers robust cutting action. Who benefits from this Twist Drill Workshop professionals and maintenance technicians who need a reliable, compact metal drill for hand-held or angle drilling will value the MetavCUT extra-short Twist Drill. It is designed for users who prioritise tool stability, quick chip evacuation and consistent hole quality over long overhangs. The product is also suitable for smaller production runs and repair jobs where machine access is limited. Strong recommendation: Choose the MetavCUT extra-short Twist Drill Type N for demanding metal drilling tasks and contact METAV Werkzeuge for expert guidance — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 56026-FDA Diameter: 2.6 mm Point Angle: 118° Type: Type N Material: HSS‑G Standard: DIN 1897 Execution: Extra short Colour: Bright finished Shank Design: Cylindrical Spiral Length: 14 mm Total Length: 43 mm Intended For: Drills for metal / Hand Drilling Machine Model Series: Standard Line Shaft Finish: Zylinder (Cylindrical shank) Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is the Twist Drill from MetavCUT used? The MetavCUT Twist Drill Type N is primarily used for drilling in high‑strength materials and larger diameters; its extra-short form is ideal for stable operation and for machining alloyed and unalloyed steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. Which three drill types are commonly distinguished? Three common drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category designed for metalworking applications. Why are Twist Drills sharpened at the tip? The tip sharpening of the MetavCUT Twist Drill reduces the cross‑cut at the tip, lowering friction and therefore the required feed force, while improving centring of the tip in the workpiece. Can the MetavCUT Twist Drill be used to drill wood? A metal Twist Drill from MetavCUT can be used in wood, but guidance and finish are inferior compared with dedicated wood drills; however, metal drills are easier to resharpen and show less self‑feed tendency. At which drilling depths is the Twist Drill most commonly used? Spiral or Twist Drills are most commonly used for through drilling; for diameter ranges up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the prevalent tool for conventional drilling tasks. What is better, HSS or HSSE? The general belief that HSSE steels are always superior to HSS is incorrect; evaluate working conditions carefully to decide whether the higher cost of HSSE is justified for your MetavCUT Twist Drill application.
2.6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Präzision und Stabilität ermöglichen saubere Bohrungen in Stahl und Gusswerkstoffen; die kurze Ausführung verringert Vibrationen und erhöht die Rundlaufgenauigkeit, das HSS-G-Material sorgt für höhere Schnittgeschwindigkeit. Bestellen Sie den MetavCUT Spiralbohrer 2,6 mm direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer 2,6 mm »Profi Line« von MetavCUT Der Spiralbohrer 2,6 mm ist eine kurze, geschliffene HSS-G-Ausführung für präzise Metallbohrungen an Handbohrmaschine und stationären Maschinen. Spiralbohrer »Profi Line« von MetavCUT HSS-G geschliffen für Metallbohrungen Kurze Ausführung für hohe Stabilität Spitzenwinkel 118° für zuverlässiges Zentrieren Geeignet für Handbohrmaschine und Säulenbohrer Kurze Bauart für bessere Stabilität und Präzision Die kurze Ausführung reduziert die Auskraglänge und minimiert so Biegekräfte und Vibrationen, was besonders bei dünnen oder gehärteten Bauteilen zu saubereren Bohrbildern führt. Durch die geringere Überhanglänge steigt die Stabilität deutlich, sodass die Bohrung näher am Sollmaß bleibt. Der Einsatz eines kurz ausgeführten Spiralbohrers ist deshalb die richtige Wahl, wenn es auf Maßhaltigkeit und saubere Schnittkanten ankommt. Materialqualität und Schneidleistung für Metall Das verwendete HSS-G kombiniert Härte und Zähigkeit; die geschliffene Fertigung garantiert scharfe Schneiden und hohe Rundlaufgenauigkeit. Nach Herstellerangaben führt diese Geometrie zu bis zu 40 % schnellerem Bohren bei gleichzeitig bis zu 50 % weniger Anpresskraft gegenüber herkömmlichen HSS-Losen. Die DIN 338-Norm definiert die Abmessungen und Toleranzen kurzer Spiralbohrer und macht die Einordnung für industrielle Anwendungen verlässlich. Zielmaterialien und Maschinenanwendung Der Bohrer eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Temperguss, Nichteisenmetalle und Hartkunststoffe. Aufgrund des Durchmessers von 2,6 mm fällt das Werkzeug in den Standard-Bereich und ist daher sowohl für Handgeführte Akkubohrschrauber als auch für stationäre Säulenbohrmaschinen geeignet. Diese Vielseitigkeit macht das Werkzeug zu einer zuverlässigen Wahl in Werkstatt, Montage und Instandsetzung. Gebrauchshinweise für längere Werkzeuglebensdauer Vorsichtige Prozessführung und passende Kühlung verlängern die Standzeit; bei stationärem Einsatz empfiehlt sich Kühlschmierstoff zur Wärmeabfuhr. Zur genauen Positionierung sind Anpunkten und ggf. Zentrierbohrer empfehlenswert, da der Typ N mit Normalspirale auf präzises Zentrieren angewiesen ist. Lagung und richtiges Spannfutter verhindern zusätzliche Vibrationen und tragen zur konstanten Bohrqualität bei. Für präzise Metallbohrungen empfehlen wir den MetavCUT Spiralbohrer aus der Profi Line – bestellen Sie über Metav Werkzeuge oder kontaktieren Sie uns per eMail info@metav-werkzeuge.com bzw. Telefon +49 2822 7131930 für technische Beratung Produktmerkmale Artikelnummer: 48026-FDA Bezeichnung: Spiralbohrer Marke: MetavCUT Serie: Profi Line Fakten Durchmesser: 2,6 mm Gesamtlänge: 61 mm Spirallänge: 33 mm Spitzenwinkel: 118° Verpackungseinheit: 10 Besonderheiten Material: HSS-G Schaftausführung: geschliffen Norm: DIN 338 Ausführung: kurz Typ: Typ N Farbe: blank Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall FAQ Ist der Bohrer für legierten Stahl geeignet? Der MetavCUT Spiralbohrer aus der Profi Line ist für legierte und unlegierte Stähle ausgelegt und bietet durch die HSS-G-Ausführung gute Standzeiten bei stationärem Einsatz. Welche Maschinen sind für diesen Bohrer geeignet? Dieser 2,6 mm Spiralbohrer eignet sich für Handbohrmaschine ebenso wie für Säulenbohrmaschinen; bei hoher Präzision ist der stationäre Einsatz zu bevorzugen. Wie wirkt sich die kurze Ausführung auf das Bohrergebnis aus? Die kurze Ausführung reduziert Vibrationen und Auslenkung und verbessert dadurch Rundlauf und Maßhaltigkeit beim Bohren in Metall. Brauche ich spezielle Kühlung für den Einsatz? Für dauerhafte Bohrarbeiten in Stahl und Guss empfiehlt sich der Einsatz von Kühlschmierstoff, um Wärmeentwicklung zu minimieren und die Standzeit des HSS-G-Werkzeugs zu erhöhen. Was bedeutet die Kennzeichnung Typ N? Typ N steht für Normalspirale; das ist die klassische Geometrie für Metallbohrer und bietet eine ausgewogene Vorschub- und Spanabfuhrcharakteristik für allgemeine Metallarbeiten.
2.75mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, Ø 2.75 mm, 118° tip, short, Black, HSS, DIN 338 (MetavCUT) The Twist Drill Type N short is a precision HSS metal drilling bit for Drilling Machines and Hand Drills, designed for accurate holes in steel and non‑ferrous metals. Precision Ø 2.75 mm for fine metalwork 118° tip for improved centring on curved surfaces Short HSS design for higher Stability and reduced runout Conforms to DIN 338 for consistent Quality Suitable for Drilling Machines and Hand Drills Engineered for stability and reliable hole quality The HSS construction of this Twist Drill offers a blend of hardness and toughness that suits routine metalworking. The short execution reduces overhang and minimizes bending, resulting in higher Precision for critical holes. For workshop environments where repeatability matters, the shorter flute length improves tool life and lowers the risk of breakage when drilling diameters below typical thresholds. Tip geometry and spiral profile for dependable centring With a 118° tip angle and the classic Type N normal spiral, this drill bit enters softer and medium‑hard materials with reliable centring and predictable chip formation. The geometry is particularly helpful when starting holes on slightly curved surfaces or when a fast penetration without excessive contact is required. Users of Drilling Machines or Hand Drills benefit from predictable behaviour during feed, especially on alloyed and unalloyed steels. Compliance with standards and easy maintenance Manufactured to DIN 338 for short cylindrical‑shank twist drills, this bit follows established tolerances for length and shank dimensions. The HSS material also allows straightforward re‑sharpening, which means workshops can restore cutting edges economically without sacrificing concentricity. For customers who want consistent batch quality and traceable specifications, the DIN classification provides clear guidance on selection and replacement. Practical application and recommended users This Twist Drill from MetavCUT is aimed at professional workshops, maintenance technicians and advanced hobbyists who require dependable metal drilling performance. It is best used for steel, cast iron, non‑ferrous metals and certain plastics where the Type N spiral performs well. The short design is beneficial for setups where rigidity is essential, such as on drill presses or when using small hand drills that require stable, repeatable results. For precision metalworking tasks the MetavCUT Twist Drill Type N short is recommended — METAV Werkzeuge provides expert technical support and can advise on suitability and additional specifications: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 400275-FDA Diameter: 2.75 mm Spiral length: 33 mm Overall length: 61 mm Tip angle: 118° Type: Type N Execution: short Material: HSS (High Speed Steel) Application: Drills for metal Suitable for: Drilling Machine, Hand Drill Colour: black Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? The Twist Drill from MetavCUT, Type N, is primarily applied when machining high‑strength materials and larger drill diameters in metalworking. This form is easy to re‑grind and withstands higher loads, making it suitable for demanding workshop and industrial applications. Which 3 drill types are there? There are three main drill categories: metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill Type N belongs to the metal drill group and is optimised for steels and similar materials.
2.7mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Kompakte Stabilität und präzise Führung zeichnen diesen Spiralbohrer aus; die HSS-Ausführung reduziert das Bruchrisiko bei kleinen Durchmessern und die Einhaltung der DIN 338 sorgt für Normkonformität in der Werkstatt. Nutzen Sie die Kombination aus Stabilität, Präzision und vielseitiger Metalltauglichkeit für saubere Bohrbilder und kurze Ausbrüche. Bestellbar direkt über Metav mit technischer Beratung bei Bedarf. Spiralbohrer von MetavCUT, Typ N (kurze Ausführung) Der Spiralbohrer von MetavCUT ist ein kurzer HSS-Bohrer nach DIN 338 für präzise Metallbohrungen mit der Handbohrmaschine. Kurzform für hohe Stabilität bei Metallbohrungen HSS-Material für belastbare Schnittleistung Typ N Normalspirale, geeignet für Stahl und Eisen 2,7 mm Durchmesser für präzise Bohrungen Zylinderschaft, passend für Handbohrmaschine Hohe Stabilität durch kurze Ausführung und robuste Werkstoffwahl Die kurze Ausführung dieses Spiralbohrers reduziert die Auskragung und sorgt damit für deutlich erhöhte Stabilität beim Bohren in Metall. Für Anwender bedeutet das weniger Vibrationen und geringeres Risiko von Bohrerbruch, speziell bei kleinen Durchmessern. Die Kombination aus HSS-Werkstoff und kurzer Bauart unterstützt saubere Bohrbilder und längere Standzeiten bei wiederholter Anwendung. Normkonformität und Typologie geben Planungssicherheit Die Einhaltung der DIN 338 definiert Form und Maße des kurzen Spiralbohrers mit Zylinderschaft und macht die Einsetzbarkeit auf gängigen Spannfuttern vorhersehbar. Der Typ N steht für die Normalspirale, die besonders für metallische Werkstoffe konzipiert ist. Der Spitzenwinkel von 118° erleichtert das Anbohren und bietet gute Zentriereigenschaften bei flächigen Werkstücken. Vielseitige Einsatzfelder im Standard-Bereich Mit einem Durchmesser von 2,7 mm gehört dieser Bohrer in den Standard-Bereich und ist ideal für Werkstatt, Montage und allgemeine Instandsetzungsarbeiten. Er eignet sich für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle sowie Kunststoffe. Durch die Zylinderschaft passt der Bohrer problemlos in Handbohrmaschine und stationäre Maschinen gleichermaßen. Praktische Hinweise zur Anwendung und Lebensdauer Für saubere Ergebnisse empfiehlt sich punktgenaues Anpunkten bei höheren Präzisionsanforderungen und die Nutzung geeigneter Kühlschmierstoffe bei Stahlbearbeitung. Kurze Werkzeuge tolerieren höhere Seitenkräfte besser, sollten aber dennoch spannungsarm geführt werden, um die Standzeit zu maximieren. Die rollgewalzte Fertigung macht den Bohrer elastischer und reduziert das Bruchrisiko bei Durchmessern unter 6 mm. Verpackung, Handling und Werkstattintegration Die Lieferung erfolgt im Set mit der angegebenen Verpackungseinheit, was die Lagerhaltung vereinfacht und Wiederbeschaffungszyklen planbar macht. Die Kombination aus HSS, kurzer Bauart und Normausführung ermöglicht schnelle Einbindung in bestehende Werkzeugsets und standardisierte Bearbeitungsabläufe in der Werkstatt. MetavCUT Spiralbohrer Typ N als zuverlässige Wahl für präzise Metallbohrungen wählen — bei Fragen oder für Bestellhilfe erreichen Sie Metav per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 40027-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Ausführung: kurz Typ: Typ N Norm: DIN 338 Material: HSS Farbe: schwarz Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 10 Fakten Durchmesser: 2,7 mm Gesamtlänge: 61 mm Spirallänge: 33 mm Spitzenwinkel: 118° Verpackungseinheit: 10 Besonderheiten HSS: High Speed Steel, hohe Zähigkeit und Schnittfestigkeit DIN 338: kurze Spiralbohrer mit Zylinderschaft, Normkonformität Typ N: Normalspirale, ausgelegt für Metallbearbeitung Ausführung kurz: geringere Auskragung, höhere Stabilität Farbe: schwarz FAQ Für welche Materialien eignet sich der Spiralbohrer von MetavCUT am besten? Der MetavCUT Spiralbohrer Typ N ist für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe geeignet und wurde speziell für Metallbohrungen im Standard-Bereich konzipiert. Passt der Bohrer in eine handelsübliche Handbohrmaschine? Ja, der Zylinderschaft des MetavCUT Spiralbohrers ist kompatibel mit gängigen Spannfuttern von Handbohrmaschine und ermöglicht sicheren Halt bei stationären und mobilen Anwendungen. Welche Vorteile bietet die kurze Ausführung laut DIN 338? Die kurze Ausführung reduziert die Auskragung, steigert die Stabilität und verringert Vibrationen, was insbesondere bei kleinen Durchmessern die Standzeit verbessert und das Bruchrisiko senkt. Wie sollte der Bohrer gekühlt oder geschmiert werden? Bei Stahlbearbeitung empfiehlt sich der Einsatz geeigneter Kühlschmierstoffe, um Wärmeentwicklung zu reduzieren und die Standzeit des HSS-Werkzeugs zu erhöhen. Wie viele Bohrer sind in einer Verpackungseinheit enthalten? Die Verpackungseinheit beträgt 10 Stück, was die Nachbestückung und Lagerhaltung in Werkstattumgebungen vereinfacht.
2.7mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill — Type N extra short, Ø 2.7 mm, 118° point angle, Bright finished, HSS‑G, DIN 1897 (MetavCUT) The Twist Drill Type N is a compact metalworking drill designed for Hand Drilling Machines to deliver stable, precise holes in confined or thin-walled workpieces. Extra short geometry improves rigidity HSS‑G material for durable metal drilling 118° point angle for reliable centring Cylindrical shank fits standard chucks DIN 1897 compliant for workshop use Precision in confined spaces increases process reliability When working where clearance is limited, the extra short geometry significantly improves stability and reduces the risk of breakage. The reduced overall length and shorter flute make the drill easier to control in thin sheets and profiles, while the compact form factor also helps when using angled or hand-held drilling equipment. This design is particularly useful for operations that demand clean, repeatable holes without excess vibration. Faster and less forceful drilling for metalworking efficiency Engineered from HSS‑G, this Twist Drill offers a ground cutting geometry that can achieve up to 40% faster feed rates and requires around 50% less thrust compared to conventional HSS drills. That means less operator fatigue and shorter cycle times when drilling alloyed and unalloyed steels, cast materials and hard plastics. The result is improved productivity and more consistent hole quality in metalworking environments. Universal mounting and dependable handling reduce setup time A cylindrical shank ensures straightforward clamping in standard three‑jaw chucks, providing universal compatibility with most Hand Drilling Machines and Drilling Machines used in workshops. Conforming to DIN 1897 and built to the Standard Line specification, the tool offers predictable mounting behaviour and good concentricity. The short length also helps when working near edges or in confined jigs, reducing the leverage that can lead to chatter or misalignment. Suited materials and professional application guidance This Type N drill from MetavCUT is aimed primarily at metalworking professionals and maintenance technicians who need a robust, compact tool for steels, cast materials, non‑ferrous metals and some engineering plastics. The 118° point angle supports easier centring on slightly curved surfaces and softer metals, while the Type N spiral remains the classic choice for metal drilling rather than very soft materials. For workshop jobs that demand reduced breakage and reliable centring, this extra short configuration delivers clear advantages. Highly recommended for precision metalworking: choose the MetavCUT Standard Line Twist Drill Type N for stable drilling in confined spaces — for technical advice and tailored support contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 56027-FDA Diameter: 2.7 mm Point angle: 118° Type: Type N Execution: extra short Colour: bright finished Material: HSS‑G Shaft execution: cylindrical Spiral length: 14 mm Total length: 43 mm Model series: Standard Line Standard: DIN 1897 Application: Drills for metal / Bohrer für Metall For drilling machine: Drilling Machine / Handbohrmaschine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Is the MetavCUT Twist Drill Type N suitable for cordless hand drills? The MetavCUT Twist Drill Type N can be used with cordless hand drills provided the chuck secures the cylindrical shank properly and the drill speed and feed are adapted to the material; using suitable cutting fluid and moderate feed reduces wear and the risk of slipping in the chuck. How should the MetavCUT Twist Drill be maintained to ensure long life? Regular sharpening and cleaning of the flute on the MetavCUT Twist Drill Type N keeps the HSS‑G cutting edges effective; inspect for chipping and store drills to avoid impact damage — regrind according to the original point geometry to preserve centring behaviour. What are Twist Drills used for? Twist Drills are mainly applied to the machining of high‑strength workpieces and larger hole diameters. The form is easy to regrind and withstands significant loads, making the MetavCUT Twist Drill Type N suitable for alloyed and unalloyed steel, cast steels and similar materials. Which three drill types are there? The three main drill types are metal drills, wood drills and stone/concrete drills. Why are twist drills sharpened? Sharpening reduces the cross‑cut at the tip of the Twist Drill, which significantly lowers friction forces and thereby reduces required feed force; at the same time the tip centres more reliably in the workpiece. Can a Twist Drill be used to drill wood? A metal (Type N) Twist Drill can be used in wood, but guidance and hole finish are inferior to dedicated wood drills; metal drills are easier to resharpen and have less self‑feeding action. For which drilling depths is the Twist Drill most commonly used? Solid drilling with a Twist Drill is common for diameters up to 20 mm and drilling depths up to 100 mm; it is the most frequently used tool for these ranges when producing holes in solid material. Which is better, HSS or HSSE? The common assumption that HSSE steels are categorically superior to HSS is not correct; evaluate working conditions carefully to decide whether the performance gain justifies the higher cost.
2.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Der kurze Spiralbohrer verbindet hohe Stabilität mit effizienter Zerspanung: HSS-G-Material und geschliffene Geometrie ermöglichen bis zu 40 % schnelleres Bohren bei 50 % geringerer Anpresskraft. Nutzen Sie die Kombination aus Präzision, Robustheit und Normkonformität (DIN 338) für anspruchsvolle Metallbohrungen und bestellen Sie die passende Ausführung direkt über Metav Werkzeuge oder fragen Sie unsere Beratung an. Spiralbohrer – Kurzspiralbohrer HSS-G 2,7 mm (Profi Line, MetavCUT) Der Spiralbohrer der Profi Line ist ein kurzer, geschliffener HSS-Bohrer für präzise Metallbohrungen auf stationären und handgeführten Maschinen. Kurze Ausführung für hohe Stabilität Geschliffen nach DIN 338 für präzise Bohrbilder Optimal für legierte und unlegierte Stähle 118° Spitzenwinkel für sicheres Eindringen Für Handbohrmaschine und stationäre Anwendung geeignet Höhere Produktivität durch geschliffene HSS-Geometrie Die geschliffene HSS-G-Geometrie reduziert Reibung und verbessert die Spanabfuhr bei Metall. Aufgrund der schliffbedingten Schärfe dringt der Bohrer leichter ein, sodass die benötigte Anpresskraft deutlich sinkt und die Bearbeitungszeit verkürzt wird. Für Anwender bedeutet das messbaren Zeitgewinn und weniger Belastung der Maschine bei gleicher Schnittqualität. Die Einhaltung der DIN 338 sorgt zudem für reproduzierbare Maßhaltigkeit und einfache Ersatzbeschaffung. Präzision und Stabilität durch kurze Ausführung Die verkürzte Auskraglänge erhöht die Steifigkeit und minimiert das Verbiegungsrisiko beim Bohren in harten Werkstoffen. Dadurch eignet sich der Kurzspiralbohrer besonders für präzise Durchgangs- und Sacklochbohrungen in Stahl, Guss und Hartkunststoff. Typische Vorteile sind bessere Rundlaufgenauigkeit und ein sauberer Bohrungsrand, was geforderte Toleranzen leichter erreichbar macht. Für hohe Genauigkeit empfiehlt sich punktgenaues Anpunkten vor der Kernbohrung. Anwendungsbereich und Maschinenempfehlung Mit einem Durchmesser im Standard-Bereich ist dieser Bohrer universell einsetzbar für Werkstatt, Montage und Reparatur. Die Ausführung Typ N entspricht der Normalspirale und ist speziell für metallische Werkstoffe optimiert. Handgeführte Geräte können eingesetzt werden; stationäre Säulenbohrmaschinen bieten jedoch die beste Grundlage für exakte Ergebnisse und längere Standzeiten. Bei höheren Anforderungen an Maßtreue ist das Einstellen geeigneter Schnittwerte und Kühlung empfehlenswert. Materialeigenschaften, Pflege und Hinweise zur Nutzung Die Profi Line Ausführung aus HSS-G verbindet Härte mit Zähigkeit; geschliffene Spannuten liefern scharfe Schneidkanten und hohen Rundlauf. Wegen der höheren Sprödigkeit geschliffener Bohrer empfiehlt sich Kühlung bei Dauerbetrieb und das Vermeiden extremer Aussparungen ohne Vorbohren. Der 118° Spitzenwinkel bietet eine gute Balance zwischen Zentrierverhalten und Schnittkraft, besonders bei flachen oder gewölbten Flächen. MetavCUT liefert damit ein Werkzeug für präzise, wirtschaftliche Metallbearbeitung. Empfehlung: Für präzise Metallbohrungen empfehlen wir den Spiralbohrer der Profi Line von MetavCUT — Bestellung und technische Beratung direkt über Metav Werkzeuge per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930; alternativ WhatsApp +49 170 2837271. Leistungsmerkmale Artikelnummer: 48027-FDA Marke: MetavCUT Serie: Profi Line Norm: DIN 338 Fakten Durchmesser: 2,7 mm Gesamtlänge: 61 mm Spirallänge: 33 mm Spitzenwinkel: 118° Verpackungseinheit: 10 Besonderheiten Material: HSS-G Schaftausführung: geschliffen Ausführung: kurz Typ: Typ N Farbe: blank Anwendung: Bohrer für Metall Für Bohrmaschine: Handbohrmaschine FAQ Für welche Materialien eignet sich dieser Bohrer am besten? Der Spiralbohrer aus der Profi Line von MetavCUT ist für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen sowie Nichteisenmetalle und Hartkunststoff ausgelegt und liefert in diesen Werkstoffen saubere Bohrbilder. Ist die kurze Ausführung für Handbohrmaschinen geeignet? Ja, der kurze, geschliffene Spiralbohrer wurde für den Einsatz an Handbohrmaschinen und stationären Maschinen konzipiert; für höchste Präzision sind Säulenbohrmaschinen vorteilhaft. Was bedeutet Typ N bei diesem Bohrer? Typ N steht für die Normalspirale, die universell für Metallbearbeitung geeignet ist und ein ausgewogenes Förder- und Zentrierverhalten bietet. Wie wirkt sich der 118° Spitzenwinkel aus? Der 118° Spitzenwinkel sorgt für gutes Eindringen und stabilen Kraftfluss beim Bohren in metallische Werkstoffe; er ist ein guter Kompromiss zwischen Zentrierbarkeit und Schnittstabilität. Wie werden Schärfe und Standzeit beim geschliffenen HSS-Bohrer beeinflusst? Die geschliffene Geometrie erzeugt sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, was saubere Bohrungen ermöglicht; gleichzeitig verlangt die Sprödigkeit geschliffener Bohrer eine angepasste Nutzung mit geeigneter Kühlschmierstoffversorgung.
2.7mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Kombinieren Sie die hohe Stabilität der kurzen Ausführung mit der reibungsreduzierten TiN-Beschichtung für präzise, langlebige Metallbohrungen. Bestellen Sie den MetavCUT Spiralbohrer direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. MetavCUT Spiralbohrer – kurzer HSS‑G Spiralbohrer für Metall MetavCUT Spiralbohrer als kurzer HSS‑G Spiralbohrer für präzise Metallbearbeitung, geeignet für Handbohrmaschine und stationäre Anwendungen Spiralbohrer »Spiralbohrer« von MetavCUT Geschliffen nach DIN 338 TIN-beschichtet für geringeren Verschleiß Kurze Ausführung für hohe Stabilität Optimal für Handbohrmaschine und Metall Kompakte Stabilität für präzise Metallbohrungen Die kurze Ausführung reduziert die Auskraglänge und minimiert dadurch Schwingungen und Verbiegen beim Bohren in harten Werkstoffen. Der geschliffene HSS-G Werkstoff sorgt für scharfe Schneiden und hohe Rundlaufgenauigkeit, was besonders bei stationärer Bearbeitung und präzisen Passungen Vorteil bringt. Durch die kompakte Bauform steigt die Führungsstabilität, wodurch weniger Nacharbeit erforderlich ist und die Fertigungsqualität konstant bleibt. Beschichtung und Leistung verlängern die Standzeit Die TIN-beschichtete Oberfläche (Titan‑Nitrid) reduziert Reibung und Hitzeentwicklung während des Bohrens, was die Lebensdauer des Werkzeugs spürbar erhöht. In Kombination mit gezielter Kühlung lassen sich Verschleiß und Kraftbedarf deutlich senken; Herstellerangaben zufolge ermöglicht der geschliffene Bohrer bis zu 40 % schnellere Vorschübe und benötigt bis zu 50 % weniger Anpresskraft als konventionelle HSS-Ausführungen. Das Ergebnis ist effizientes Arbeiten bei gleichbleibender Oberfläche. Vielseitige Eignung für übliche Metallanwendungen Mit einem Durchmesser von 2,7 mm ordnet sich der Bohrer in den Standard‑Bereich ein und eignet sich für den Alltagsgebrauch in Werkstatt und Montage. Der Typ N Normalspirale ist für legierte und unlegierte Stähle, Gusswerkstoffe sowie Nichteisenmetalle ausgelegt und arbeitet zuverlässig in dünnen bis mittleren Blechen. Für hochpräzise Passungen empfiehlt sich vorheriges Zentrieren mit einem Zentrierbohrer, um ein Wandern beim Anbohren zu vermeiden. Praxisgerechte Hinweise zur Handhabung und Maschine Bei Gebrauch in einer Handbohrmaschine garantiert die kurze Länge bessere Führbarkeit; dennoch sind passende Drehzahlen, Kühlschmierstoffe und kontrollierte Vorschübe entscheidend für optimale Ergebnisse. Die Norm DIN 338 definiert die Abmessungen und Geometrie für kurze geschliffene Spiralbohrer und stellt sicher, dass die Fertigungsqualität reproduzierbar ist. Verwenden Sie den Bohrer bevorzugt stationär oder mit stabiler Spannvorrichtung, um Bruchrisiken zu minimieren. Empfehlung: MetavCUT Spiralbohrer mit TiN‑Beschichtung für anspruchsvolle Metallbohrungen – Anfrage an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 46027-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Ausführung: kurz Norm: DIN 338 Fakten Durchmesser: 2,7 mm Gesamtlänge: 61 mm Spirallänge: 33 mm Spitzenwinkel: 118° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Schaftausführung: geschliffen Beschichtung: TIN-beschichtet (Titan‑Nitrid, reibmindernd) Typ: Typ N (Normalspirale, für Metall) Einsatz: Bohrer für Metall Für Bohrmaschine: Handbohrmaschine Farbe: TIN-beschichtet SKU: 46027-FDA FAQ Für welche Materialien ist der Bohrer geeignet? Der MetavCUT Spiralbohrer ist für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen, Neusilber, Kupfer, Bronze und Hartkunststoff ausgelegt und bietet dank Typ N‑Geometrie zuverlässige Ergebnisse bei Metallbearbeitung. Warum ist die kurze Ausführung vorteilhaft? Die kurze Ausführung reduziert Auskraglänge und Schwingungen, was die Führungsstabilität erhöht; der geschliffene HSS-G Bohrer erzeugt präzisere Bohrbilder und verringert Nacharbeit. Wie wirkt sich die TiN‑Beschichtung aus? Die TiN‑Beschichtung senkt Reibung und Hitzeentwicklung, verlängert die Standzeit und ermöglicht bessere Schnittwerte bei Kühlung; das verbessert Wirtschaftlichkeit und Prozesssicherheit. Ist der Bohrer für Handbohrmaschine geeignet? Ja, der Spiralbohrer ist für den Einsatz in Handbohrmaschine vorgesehen; bei hoher Präzision empfiehlt sich stationäre Spannvorrichtung oder Zentrierung vor dem Anbohren. Welche Normen und Fertigungsmerkmale gelten für dieses Werkzeug? Der Bohrer entspricht DIN 338, ist geschliffen (HSS‑G) und bietet dadurch scharfe Schneiden sowie hohe Rundlaufgenauigkeit, ideal für präzise Metallbearbeitung.
2.8mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill Type N — 2.8 mm, 118°, HSS, short, black, DIN 338 by MetavCUT The Twist Drill Type N is a short HSS metal-drilling bit designed for precise, stable holes in metal components with a 2.8 mm diameter. Twist Drill Type N for metal machining Short design for increased stability 118° tip angle for improved penetration Made of HSS for toughness and elasticity Conforms to DIN 338 for short spiral drills Durable HSS construction for demanding metalwork The short HSS Twist Drill combines High Speed Steel toughness with a compact geometry that reduces flex and chatter during machining. This construction delivers higher stability when drilling into alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. The roll-formed production process increases elasticity and reduces breakage risk particularly on small diameters, making this short bit a reliable choice for repetitive workshop tasks and controlled industrial applications. Precise geometry and faster engagement on workpieces Thanks to the 118° tip angle, the Twist Drill achieves a balance between centring and penetration: easier initiation on slightly curved surfaces while maintaining a sharp entry for softer metals such as aluminium. The reduced quench on the cutting edges lowers friction and improves tool life during continuous use. The short overall length and modest spiral length enhance concentricity and reduce runout, resulting in cleaner holes and less post-processing for punched or machined components. Designed for accuracy in compact setups The compact format of this short spiral Twist Drill is advantageous when tool overhang is limited or when drilling on portable equipment and hand-operated machines. Reduced cantilever length means less vibration and more repeatable hole quality in fixtures and jigs. This characteristic makes the bit particularly well suited for precision maintenance, prototyping and production environments where runout and stability are critical to component fit and finish. Compliance, application and standards you can trust Manufactured to DIN 338, this Twist Drill adheres to specifications for short cylindrical-shank bits, ensuring consistent dimensions and interchangeability with standard chucks. The Type N normal spiral profile is optimised for metal drilling rather than soft woods; it provides a classic chip evacuation pattern and is simple to resharpen if required. For jobs requiring deeper reach or special coatings, consider the tooling alternatives; for standard metal work, this HSS short bit delivers dependable performance. Consider the MetavCUT Twist Drill Type N as the reliable HSS solution for precise metal drilling — METAV Werkzeuge offers expert technical advice and support to ensure the correct tool selection for your application, contact via info@metav-werkzeuge.com / +49 2822 7131930 / WhatsApp +49 170 2837271 Technical Data Bezeichnung: Twist Drill Marke: MetavCUT SKU: 40028-FDA Typ: Type N Durchmesser: 2.8 mm Spitzenwinkel: 118° Ausführung: short Spiralänge: 33 mm Gesamtlänge: 61 mm Material: HSS Farbe: black Anwendung: Drills for metal Norm: DIN 338 Für Bohrmaschine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Type N by MetavCUT used for? The MetavCUT Twist Drill Type N is primarily applied to machining high-strength materials and larger drill diameters in metalworking. Its form is easy to resharpen and designed to withstand higher loads, which makes it suitable for demanding tasks on alloyed and unalloyed steels as well as cast and non-ferrous metals. Which three drill types exist? The main categories are metal drills (like the MetavCUT Twist Drill), wood drills, and stone/concrete drills. Each type is optimised for chip formation, flute geometry and tip angle according to the material to be processed.
Why carbide indexable inserts remain the go-to choice
Carbide indexable inserts are the most widely used and versatile cutting inserts in machining. Manufactured from a sintered mixture of hard particles such as tungsten carbide and a metallic binder like cobalt, these inserts form the actual cutting edge on toolholders including milling cutters, turning inserts and drills. Synonyms used here: carbide cutting inserts, indexable carbide inserts.
How they perform under coolant and load
As the cutting element, carbide indexable inserts enable economic and precise machining across a broad spectrum of materials, from soft non‑ferrous metals to high‑strength steels. In tool systems without internal cooling, heat generated at the cutting zone is normally removed by external machine nozzles using coolant, which is adequate for most standard tasks, open contours and easily accessible components. For deep holes, heavy roughing or when working with materials that generate high temperatures such as stainless steel or titanium alloys, the use of internal cooling is essential: coolant is delivered through internal channels in the toolholder directly to the cutting edge under pressure to prevent thermal overload, optimise chip formation and extend insert life.
Key performance gains you can expect
- increased tool life through the high wear resistance and balanced toughness of tungsten carbide inserts
- consistent chip control and surface finish when coolant is delivered precisely via internal channels
- reduced machine downtime thanks to easy indexability and fast insert changes on compatible toolholders
- broad material compatibility, from soft non‑ferrous metals to hardened steels, enabling fewer tool variants in stock
- economic productivity by combining long stand life with repeatable cutting performance
Metav as your precision partner
Metav stands for the democratisation of precision. With decades of expertise and a catalogue that spans from high‑precision measuring instruments to full workshop equipment, Metav acts as a reliable quality filter for the European market from its Emmerich location. Over 48,000 customers trust Metav’s range and service; the breadth of more than 250,000 products helps reduce supplier complexity while ensuring consistent supply and product quality for industry and trade.
In brief: carbide indexable inserts at a glance
Carbide indexable inserts deliver the necessary balance of extreme wear resistance and mechanical toughness for versatile, cost‑efficient machining. Used with appropriate coolant strategy—external coolant for general work and internal cooling for demanding, deep or heat‑intensive operations—they are a cornerstone of modern metalcutting.
FAQ
What are carbide indexable inserts made of?
Carbide indexable inserts are manufactured from a sintered mixture of hard particles such as tungsten carbide and a metallic binder like cobalt, producing a cutting material that combines high wear resistance with the toughness needed to resist mechanical shock.
When is internal cooling necessary for carbide cutting inserts?
Internal cooling becomes necessary for deep hole drilling, heavy roughing and when machining materials that generate significant heat, such as stainless steel or titanium alloys. Internal cooling channels in the toolholder deliver coolant directly to the cutting edge to prevent thermal overload and improve chip breakage.
Can indexable carbide inserts be used without internal cooling?
Yes. For most standard applications, open contours and well‑accessible components, external coolant supplied by machine nozzles is sufficient, as tungsten carbide is more tolerant of moderate temperature fluctuations than some alternative materials.
How do carbide indexable inserts contribute to production efficiency?
By offering long tool life, stable cutting performance and quick indexability on compatible toolholders, indexable carbide inserts help reduce downtime, simplify tool inventories and maintain consistent part quality across varying materials.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com