150kg Single-Point Stainless Steel Load Cell, IP67, C3 OIML, 2 mV/V - KERN
€270.00
Product information "150kg Single-Point Stainless Steel Load Cell, IP67, C3 OIML, 2 mV/V - KERN"
Take advantage of precise weighing, robust stainless-steel construction and IP67 protection combined for reliable operation in industrial and hygienic environments; order the CP.150-3P7 directly via Metav Werkzeuge or consult our technical advisors for specification support
CP.150-3P7 Single-point stainless steel load cell — 150 kg, IP67 (KERN)
The CP.150-3P7 is a compact single-point load cell designed for industrial, packaging and laboratory scales, offering robust stainless-steel construction for demanding weighing tasks
- Single-point stainless steel design
- 150 kg rated capacity, 2 mV/V output
- IP67 protection for harsh environments
- Fits platforms up to 400×400 mm
Dependable accuracy for continuous weighing operations
The CP.150-3P7 delivers consistent accuracy through its single-point sensing principle and a nominal output of 2 mV/V, enabling straightforward span adjustment and stable readings on platform scales. The single-point arrangement means the sensing element is optimised to measure loads applied across the platform surface with minimal influence from off-centre loading, which benefits price-computing scales and tabletop balances where repeatability is crucial. Rated to 150 kg and classified to OIML C3, this cell provides a reliable performance basis for process control and product inspection, and the measurable output supports integration with common analogue and digital instrumentation for straightforward calibration and verification.
Built for harsh conditions and hygienic environments
Constructed from stainless steel, the module resists corrosion and mechanical wear, making it suitable for the food, pharmaceutical and packaging industries where material compatibility and cleanability matter. The enclosure meets IP67 (EN 60529), offering dust-tight protection and temporary immersion resistance, which reduces downtime and maintenance in washdown or dusty production areas. The operating range from −35°C to 65°C supports installations across varied climates and factory environments. RoHS conformity further ensures compliance with current material standards, supporting procurement policies that prioritise regulatory conformity and environmental responsibility.
Simple integration and flexible application
Installation and wiring are simplified by a 6-lead connector, enabling full bridge excitation and sense lines for accurate compensations over temperature and cabling length. The cell’s compact dimensions and light weight (approximately 0.98 kg) make it straightforward to mount under platforms up to 400×400 mm without compromising structural integrity. Suitable applications include industrial manufacturing, research and development, packaging lines and checkweighing systems. For projects requiring verified legal-for-trade performance, OIML R60 C4 execution is available on request, aiding conformity tasks where statutory verification is required. For users unfamiliar with load cell terminology, a single-point cell measures weight across a small platform area and is engineered to remain accurate even when loads are not perfectly centred.
For expert advice or supply of the CP.150-3P7 from Metav Werkzeuge in Emmerich — including specification checks and procurement support — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930
Technical data
- SKU: CP.150-3P7
- Manufacturer: KERN
- GTIN: 4045761254077
- Origin: CN
- HS code: 84239010
Facts
- Rated capacity: 150 kg
- Nominal output: 2 mV/V
- Weight: 0.98 kg
- Operating temperature: −35°C – 65°C
- Maximum platform size: 400×400 mm
- Protection class: IP 67
- OIML class: C3
- Standard: EN 60529
Special features
- Material: Stainless steel
- Connection: 6-lead connector
- RoHS compliant
- Suitable for industrial, packaging, food and pharma applications
- OIML R60 C4 available on request
FAQ
What is the nominal capacity and output of this load cell?
The CP.150-3P7 is rated to 150 kg with a nominal output of 2 mV/V, allowing precise signal processing and straightforward calibration.
Can this load cell be used in food-industry environments?
Yes, the stainless-steel construction and IP67 protection make the CP.150-3P7 suitable for many food and pharmaceutical applications where cleanliness and resistance to washdown are required.
What does IP67 mean in practical terms for installation?
IP67 (EN 60529) indicates dust-tight enclosure and protection against temporary immersion in water, reducing risk of failure in washdown or wet production zones when the CP.150-3P7 is mounted correctly.
Is the CP.150-3P7 suitable for large platform sizes?
The design supports platforms up to 400×400 mm; beyond that size, consider a multi-point arrangement or consult Metav Werkzeuge for recommendations.
Does the load cell support legal-for-trade applications?
The standard configuration is OIML class C3, and OIML R60 C4 execution can be supplied on request for stricter verification requirements.
How is the cell wired and integrated into weighing electronics?
Integration uses a 6-lead connector providing excitation, signal and sense lines for accurate compensation; the CP.150-3P7 is compatible with common instrumentation used in industrial weighing systems.
Manufacturer: KERN — Origin: China
Zubehör
Benefit from precise, network-ready weighing data and flexible interfaces: the combination of USB/RS-232 connectivity, IoT-ready operation and DIN-rail mounting simplifies integration into production lines and conveyor systems. Order the device directly via Metav Werkzeuge or contact our consultants for configuration support. KERN YKV-01 — Digital weigh transmitter with USB & RS-232, IoT-ready The KERN YKV-01 is a compact digital weigh transmitter designed for industrial scales and automated weighing systems, enabling fast data capture and reliable transfer to computers, PLCs and networked applications. IoT-ready for Industry 4.0 USB and RS-232 interfaces DIN-rail and wall mounting Configurable transmission formats Seamless data flow for automated production The transmitter delivers fast, configurable data transfer, making it suitable for integration into automated lines and process control systems. With native USB and RS-232 interfaces and freely configurable transmission formats, measurement values can be forwarded directly to PCs, PLCs or MES environments. The included software allows calibration, large-format display and export of results into common enterprise systems such as SAP and Oracle, reducing manual transcription and improving production traceability. Compact, robust design that fits industrial spaces Engineered for demanding environments, the unit combines a small footprint ()100×140×36 mm() with a lightweight construction of )0.33 kg(), so it fits neatly in control cabinets or on mounting rails. The plastic die-cast housing resists everyday workshop stresses while permitting both DIN-rail and wall mounting for flexible installation. Power is supplied via USB with a detachable power adapter and included EURO/UK/US adapters, eliminating the need for internal batteries and simplifying service routines. Rated for operation between -10°C and 40°C, the transmitter is suitable for a wide range of industrial settings. Accurate signals and simple configuration for reliable throughput Measurement tasks are handled with essential functions such as weigh and tare, while a measurement frequency of 10 Hz ensures smooth value updates for moving loads on conveyors. The bundled configuration tools enable fast setup and adjustment without specialised equipment, and compatibility with KERN weighing platforms streamlines roll-out across multiple stations. By converting raw readings into ready-to-use formats, the system reduces error sources and supports faster, more economic process control—reflecting a practical approach to Industry 4.0 integration and operational efficiency. For tailored advice on system integration and to procure the KERN YKV-01 through Metav Werkzeuge in Emmerich, contact our consultants by eMail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: YKV-01 Manufacturer: KERN GTIN: 4045761215290 Origin country: CN Facts Dimensions: 100×140×36 mm Weight: 0.33 kg Measurement frequency: 10 Hz Input voltage: 100 V - 240 V, 50 / 60 Hz Operating temperature: -10°C–40°C Special features Material: Plastic Data output: USB + RS-232 Power: USB with detachable power supply Included adapters: EURO; UK; US Mounting: Wall and DIN-rail Functions: Weigh, tare Configuration software included Compatible with all KERN weighing platforms No battery FAQ Is the transmitter compatible with existing KERN platforms? Yes. The KERN YKV-01 is designed for compatibility with KERN weighing platforms and can be connected to existing load cells and platforms without additional converters. Which interfaces are available for data transfer? The device provides USB and RS-232 outputs; transmission formats are freely configurable to match controller or PC requirements. Can the unit be powered from the USB port? Yes. The KERN YKV-01 is powered via USB and ships with a detachable power supply plus EURO, UK and US adapters. Is the transmitter suitable for conveyor-belt applications? Yes. With a 10 Hz measurement rate and configurable output, the transmitter supports dynamic weighing and data forwarding on conveyor systems and production lines. What mounting options are available? The unit supports both DIN-rail and wall mounting for flexible placement within control cabinets or on machine frames. Does the package include configuration tools? Yes. The KERN YKV-01 includes configuration software for calibration, large-format display and data export to other applications. Manufacturer: KERN — Dealer: Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930
Benefit from a compact, IoT-ready transmitter that combines versatile interfaces and simple USB power for fast integration and reliable weight data transfer; order directly via Metav Werkzeuge or consult our team for system-specific advice. KERN YKV-02 — Digital weight transmitter with Ethernet, USB and RS‑232 interfaces The KERN YKV-02 is a compact digital weight transmitter for industrial scales, designed to capture and forward weighing data to networks, PLCs and computers for automated process control. IoT-ready for Industry 4.0 integration Ethernet, USB and RS‑232 interfaces USB-powered with EU/UK/US adapters included DIN-rail and wall-mountable robust housing Rapid integration into automated systems The YKV‑02 enables fast data transfer from a weighing platform to higher‑level systems, supporting Ethernet, USB and RS‑232 interfaces as standard. This combination ensures straightforward connectivity to PCs, PLCs and networked systems, allowing measurement results to be converted into formats compatible with enterprise software (for example SAP or Oracle). The device’s IoT-ready architecture reduces integration time and helps maintain continuous production flow by enabling automated data capture and downstream processing. Dependable measurement performance with efficient power Designed for continuous operation, the transmitter samples at 10 Hz, delivering timely weight updates suitable for conveyor and batching applications. The unit is powered via the USB connector, simplifying wiring and enabling centralised power management; a detachable USB power supply with EU/UK/US plug options is included. Such a power arrangement lowers installation complexity while keeping the control cabinet tidy and energy use efficient, which supports predictable runtime and easier maintenance planning. Space-saving, robust design for industrial environments Housed in a robust plastic die‑cast enclosure, the transmitter combines compact dimensions (100×140×35 mm) with a low mass (0.34 kg), making it suitable for wall mounting or DIN‑rail installation in control panels. The compact form factor conserves valuable cabinet space and protects the electronics in standard industrial settings. Compatibility with existing KERN weighing platforms ensures a reliable mechanical and electrical interface, reducing the risk of retrofit issues when upgrading or expanding weighing points on lines and stations. Ready-to-use package with configuration tools The YKV‑02 is supplied with the necessary accessories to get a weighing point online quickly: the digital transmitter itself, a USB cable with detachable power supply, a DIN‑rail bracket and configuration software. The included software supports calibration, adjustment and large-format visualisation of measured values on a PC, plus export and data handover to other applications. Clear configuration options and freely selectable transmission formats make it easier to standardise data flow across multiple devices and reporting systems, shortening commissioning time and reducing engineering effort. Discuss system compatibility and integration planning with Metav Werkzeuge — request a tailored connectivity assessment for the KERN YKV‑02 from our Emmerich team or ask our consultants to verify the transmitter’s fit for a specific application Technical data Article number: YKV SKU: YKV-02 GTIN: 4045761220423 Manufacturer: KERN Origin: CN Numbers / Core technical data Dimensions (W×H×D): 100×140×35 mm Weight: 0.34 kg Measurement frequency: 10 Hz Operating temperature: -10 °C – 40 °C Input voltage (power adapter): 100 V – 240 V, 50 / 60 Hz Commodity code: 90160090 eClass: 27320101 Special features Data outputs: Ethernet + USB + RS‑232 Power: USB including detachable power supply Power adapters included: EU; UK; US Housing: robust plastic die‑cast Mounting: wall mount and DIN‑rail bracket included Functions: weighing, taring Software: configuration and data visualisation software included Compatibility: compatible with all KERN weighing platforms Typical applications: industry and manufacturing, chemical, food and pharma, building materials, logistics and packaging FAQ How is the YKV‑02 powered and what adapters are supplied? The KERN YKV‑02 is powered via USB; a detachable USB power supply is supplied with EU, UK and US plug adapters for flexible installation. Can the transmitter connect directly to a PLC or network? Yes. The transmitter offers Ethernet and RS‑232 interfaces in addition to USB, enabling direct connection to PLCs, networked systems and PCs for automated data exchange. What sample rate does the unit provide for weight readings? The unit provides a measurement frequency of 10 Hz, suitable for steady conveyor weighing and process monitoring where frequent updates are required. Is mounting hardware included for control cabinet installation? A DIN‑rail bracket and wall‑mounting option are included, allowing installation inside control cabinets or on panels with minimal additional hardware. Does the package include software for calibration and data export? Yes. The YKV‑02 is supplied with configuration software that supports calibration, large‑format display of values and export of results into formats compatible with enterprise systems. Manufacturer: KERN; Dealer: Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271