3 kg Single-Point Load Cell, Anodised Aluminium, 2 mV/V, IP65, OIML C3 - KERN
€60.00
Product information "3 kg Single-Point Load Cell, Anodised Aluminium, 2 mV/V, IP65, OIML C3 - KERN"
Benefit from precise small‑load weighing through the combination of a 3 kg nominal capacity, anodised aluminium construction and IP65 protection for reliable use in production environments; order the CP.3‑3P1 directly via Metav Werkzeuge or ask our consultants if required.
KERN CP.3-3P1 Single‑Point Load Cell – 3 kg capacity, IP65
The CP.3‑3P1 is a compact single‑point load cell designed for industrial weighing and counting applications, suitable for bench, platform and counting scales.
- Anodised aluminium construction
- IP65 protection for harsh environments
- Nominal capacity 3 kg, 2 mV/V sensitivity
- Suitable for scales up to 250×350 mm
Accurate small‑load measurement for consistent throughput
The CP.3‑3P1 is engineered as a single‑point load cell to deliver repeatable readings for small loads, providing a nominal output of 2 mV/V that ensures compatibility with standard weighing indicators and controllers. This level of electrical output facilitates stable signal processing and straightforward calibration, which translates into reduced downtime and fewer rejects on the production line. For applications where counting accuracy and batch consistency matter, the sensor’s design supports precise piece counting and dose dispensing, improving overall process efficiency.
Built to withstand industrial conditions and frequent cleaning
Robustness is central to the design: the measuring body is made from anodised aluminium, combining a low weight with corrosion resistance, while the IP65 rating protects the electronics against dust ingress and water jets. The specified operating range from ‑35 °C to 65 °C means reliable performance across cold stores and warm production areas alike. These characteristics reduce maintenance cycles and extend service life, making the component a cost‑effective choice for environments such as packaging lines, food and pharmaceutical production or demanding workshop conditions.
Easy integration reduces engineering effort
Integration is simplified by the 4‑wire connection, a compact footprint and suitability for platforms up to 250×350 mm, allowing direct replacement or new installations without extensive mechanical redesign. The low unit weight and standardised electrical interface help to accelerate installation and commissioning. Where certification is required, execution according to OIML R60 in class C4/C5 is available on request, enabling legal‑for‑trade setups. These compatibility and certification options help shorten approval cycles and keep projects on schedule.
Practical benefits across industries and applications
Designed for use in industrial manufacturing, packaging, machine building and research labs, the sensor supports high‑volume operations and sensitive measurement tasks alike. The combination of a compact single‑point design and proven materials delivers a dependable sensing solution for both fixed installations and modular weighing platforms. Backed by Metav’s European supply chain and quality filter based in Emmerich am Rhein, procurement teams can rely on consistent availability, clear documentation and a partner that understands workshop requirements.
Choose the KERN CP.3‑3P1 for reliable small‑load weighing and contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930
Technical data
- Article number: CP P1
- SKU: CP.3-3P1
- GTIN: 4045761221208
- Manufacturer: KERN
- Origin: CN
- Compliance: CE and RoHS conform
- Tariff number: 84239010
Facts
- Capacity: 3 kg
- Nominal output: 2 mV/V
- Operating temperature: -35 °C to 65 °C
- Protection class: IP65
- Weight: 0.17 kg
- Maximum recommended platform size: 250×350 mm
- OIML class: C3
- eClass: 27320302
Special features
- Material: anodised aluminium
- Connection: 4‑wire connection
- Suitable for counting scales, bench scales, platform scales
- Applications: industry, packaging, food and pharma, machine building, R&D
- OIML R60 C4/C5 version available on request
FAQ
What capacity range does this load cell cover?
The CP.3‑3P1 is specified for a maximum capacity of 3 kg, making it suitable for small‑load weighing and counting applications.
Is the sensor suitable for washdown or humid environments?
Yes, the device has an IP65 rating and an anodised aluminium body, which protects against dust ingress and water jets common in cleaning cycles.
Can this load cell be used for legal‑for‑trade scales?
A version compliant with OIML R60 in classes C4 or C5 can be supplied on request to meet legal‑for‑trade requirements.
Which platform size is recommended with this load cell?
Use with platforms up to 250×350 mm for optimal load distribution and measurement accuracy.
What electrical interface does the load cell use?
The CP.3‑3P1 uses a 4‑wire connection, compatible with typical industrial weighing indicators and controllers.
Metav Werkzeuge, Emmerich am Rhein, info@metav-werkzeuge.com, +49 2822 7131930
Zubehör
Benefit from precise, network-ready weighing data and flexible interfaces: the combination of USB/RS-232 connectivity, IoT-ready operation and DIN-rail mounting simplifies integration into production lines and conveyor systems. Order the device directly via Metav Werkzeuge or contact our consultants for configuration support. KERN YKV-01 — Digital weigh transmitter with USB & RS-232, IoT-ready The KERN YKV-01 is a compact digital weigh transmitter designed for industrial scales and automated weighing systems, enabling fast data capture and reliable transfer to computers, PLCs and networked applications. IoT-ready for Industry 4.0 USB and RS-232 interfaces DIN-rail and wall mounting Configurable transmission formats Seamless data flow for automated production The transmitter delivers fast, configurable data transfer, making it suitable for integration into automated lines and process control systems. With native USB and RS-232 interfaces and freely configurable transmission formats, measurement values can be forwarded directly to PCs, PLCs or MES environments. The included software allows calibration, large-format display and export of results into common enterprise systems such as SAP and Oracle, reducing manual transcription and improving production traceability. Compact, robust design that fits industrial spaces Engineered for demanding environments, the unit combines a small footprint ()100×140×36 mm() with a lightweight construction of )0.33 kg(), so it fits neatly in control cabinets or on mounting rails. The plastic die-cast housing resists everyday workshop stresses while permitting both DIN-rail and wall mounting for flexible installation. Power is supplied via USB with a detachable power adapter and included EURO/UK/US adapters, eliminating the need for internal batteries and simplifying service routines. Rated for operation between -10°C and 40°C, the transmitter is suitable for a wide range of industrial settings. Accurate signals and simple configuration for reliable throughput Measurement tasks are handled with essential functions such as weigh and tare, while a measurement frequency of 10 Hz ensures smooth value updates for moving loads on conveyors. The bundled configuration tools enable fast setup and adjustment without specialised equipment, and compatibility with KERN weighing platforms streamlines roll-out across multiple stations. By converting raw readings into ready-to-use formats, the system reduces error sources and supports faster, more economic process control—reflecting a practical approach to Industry 4.0 integration and operational efficiency. For tailored advice on system integration and to procure the KERN YKV-01 through Metav Werkzeuge in Emmerich, contact our consultants by eMail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: YKV-01 Manufacturer: KERN GTIN: 4045761215290 Origin country: CN Facts Dimensions: 100×140×36 mm Weight: 0.33 kg Measurement frequency: 10 Hz Input voltage: 100 V - 240 V, 50 / 60 Hz Operating temperature: -10°C–40°C Special features Material: Plastic Data output: USB + RS-232 Power: USB with detachable power supply Included adapters: EURO; UK; US Mounting: Wall and DIN-rail Functions: Weigh, tare Configuration software included Compatible with all KERN weighing platforms No battery FAQ Is the transmitter compatible with existing KERN platforms? Yes. The KERN YKV-01 is designed for compatibility with KERN weighing platforms and can be connected to existing load cells and platforms without additional converters. Which interfaces are available for data transfer? The device provides USB and RS-232 outputs; transmission formats are freely configurable to match controller or PC requirements. Can the unit be powered from the USB port? Yes. The KERN YKV-01 is powered via USB and ships with a detachable power supply plus EURO, UK and US adapters. Is the transmitter suitable for conveyor-belt applications? Yes. With a 10 Hz measurement rate and configurable output, the transmitter supports dynamic weighing and data forwarding on conveyor systems and production lines. What mounting options are available? The unit supports both DIN-rail and wall mounting for flexible placement within control cabinets or on machine frames. Does the package include configuration tools? Yes. The KERN YKV-01 includes configuration software for calibration, large-format display and data export to other applications. Manufacturer: KERN — Dealer: Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930
Benefit from a compact, IoT-ready transmitter that combines versatile interfaces and simple USB power for fast integration and reliable weight data transfer; order directly via Metav Werkzeuge or consult our team for system-specific advice. KERN YKV-02 — Digital weight transmitter with Ethernet, USB and RS‑232 interfaces The KERN YKV-02 is a compact digital weight transmitter for industrial scales, designed to capture and forward weighing data to networks, PLCs and computers for automated process control. IoT-ready for Industry 4.0 integration Ethernet, USB and RS‑232 interfaces USB-powered with EU/UK/US adapters included DIN-rail and wall-mountable robust housing Rapid integration into automated systems The YKV‑02 enables fast data transfer from a weighing platform to higher‑level systems, supporting Ethernet, USB and RS‑232 interfaces as standard. This combination ensures straightforward connectivity to PCs, PLCs and networked systems, allowing measurement results to be converted into formats compatible with enterprise software (for example SAP or Oracle). The device’s IoT-ready architecture reduces integration time and helps maintain continuous production flow by enabling automated data capture and downstream processing. Dependable measurement performance with efficient power Designed for continuous operation, the transmitter samples at 10 Hz, delivering timely weight updates suitable for conveyor and batching applications. The unit is powered via the USB connector, simplifying wiring and enabling centralised power management; a detachable USB power supply with EU/UK/US plug options is included. Such a power arrangement lowers installation complexity while keeping the control cabinet tidy and energy use efficient, which supports predictable runtime and easier maintenance planning. Space-saving, robust design for industrial environments Housed in a robust plastic die‑cast enclosure, the transmitter combines compact dimensions (100×140×35 mm) with a low mass (0.34 kg), making it suitable for wall mounting or DIN‑rail installation in control panels. The compact form factor conserves valuable cabinet space and protects the electronics in standard industrial settings. Compatibility with existing KERN weighing platforms ensures a reliable mechanical and electrical interface, reducing the risk of retrofit issues when upgrading or expanding weighing points on lines and stations. Ready-to-use package with configuration tools The YKV‑02 is supplied with the necessary accessories to get a weighing point online quickly: the digital transmitter itself, a USB cable with detachable power supply, a DIN‑rail bracket and configuration software. The included software supports calibration, adjustment and large-format visualisation of measured values on a PC, plus export and data handover to other applications. Clear configuration options and freely selectable transmission formats make it easier to standardise data flow across multiple devices and reporting systems, shortening commissioning time and reducing engineering effort. Discuss system compatibility and integration planning with Metav Werkzeuge — request a tailored connectivity assessment for the KERN YKV‑02 from our Emmerich team or ask our consultants to verify the transmitter’s fit for a specific application Technical data Article number: YKV SKU: YKV-02 GTIN: 4045761220423 Manufacturer: KERN Origin: CN Numbers / Core technical data Dimensions (W×H×D): 100×140×35 mm Weight: 0.34 kg Measurement frequency: 10 Hz Operating temperature: -10 °C – 40 °C Input voltage (power adapter): 100 V – 240 V, 50 / 60 Hz Commodity code: 90160090 eClass: 27320101 Special features Data outputs: Ethernet + USB + RS‑232 Power: USB including detachable power supply Power adapters included: EU; UK; US Housing: robust plastic die‑cast Mounting: wall mount and DIN‑rail bracket included Functions: weighing, taring Software: configuration and data visualisation software included Compatibility: compatible with all KERN weighing platforms Typical applications: industry and manufacturing, chemical, food and pharma, building materials, logistics and packaging FAQ How is the YKV‑02 powered and what adapters are supplied? The KERN YKV‑02 is powered via USB; a detachable USB power supply is supplied with EU, UK and US plug adapters for flexible installation. Can the transmitter connect directly to a PLC or network? Yes. The transmitter offers Ethernet and RS‑232 interfaces in addition to USB, enabling direct connection to PLCs, networked systems and PCs for automated data exchange. What sample rate does the unit provide for weight readings? The unit provides a measurement frequency of 10 Hz, suitable for steady conveyor weighing and process monitoring where frequent updates are required. Is mounting hardware included for control cabinet installation? A DIN‑rail bracket and wall‑mounting option are included, allowing installation inside control cabinets or on panels with minimal additional hardware. Does the package include software for calibration and data export? Yes. The YKV‑02 is supplied with configuration software that supports calibration, large‑format display of values and export of results into formats compatible with enterprise systems. Manufacturer: KERN; Dealer: Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271