30kg Single-Point Stainless Steel Load Cell 2 mV/V, IP67, OIML C3 - KERN
€270.00
Product information "30kg Single-Point Stainless Steel Load Cell 2 mV/V, IP67, OIML C3 - KERN"
Take advantage of a robust, stainless solution that combines precise 30 kg capacity, an industry-standard 2 mV/V rated output and sealed IP67 protection for reliable operation in demanding production environments; order directly via Metav Werkzeuge or consult the Metav team for tailored integration advice.
KERN Single‑Point Load Cell CP.30-3P7 — stainless steel, 30 kg, IP67
A Single‑Point Load Cell CP.30-3P7 engineered for accurate weight and force measurement across industrial, packaging and laboratory applications
- Stainless steel single‑point load cell
- IP67 protection for harsh environments
- Nominal capacity 30 kg and 2 mV/V output
- Suitable for 400×400 mm platforms
Precision where process consistency matters
The stainless construction and single‑point design deliver repeatable, high‑resolution measurement that supports automated and manual weighing alike. The single‑point concept centres the load over the sensing element, ensuring stable readings even with off‑centre loads; this reduces weighing error on bench and floor scales. The electrical rated output of 2 mV/V provides a clear analogue signal for straightforward interfacing with amplifiers and indicators. For environments requiring verified metrological performance, the module meets OIML class C3 and OIML R60 C4 verification is available on request, offering traceable accuracy for regulated applications.
Built to withstand factory conditions
Durability is central to the design: the housing is stainless steel and sealed to IP67 under EN 60529, so the sensor tolerates dust ingress and brief immersion, which is common in cleaning cycles and wet production floors. The operating range from -35 °C to 65 °C maintains stable performance across hot and cold process zones. Thanks to corrosion‑resistant materials and RoHS compliance, this load cell supports long service life and reduced maintenance intervals, translating to fewer line stoppages and lower total cost of ownership.
Integration made straightforward for system builders
Connectivity and mechanical compatibility simplify installation: a 6‑wire connection supports standard excitation and sense circuits for temperature‑compensated readings, and the compact mass of 0.39 kg eases handling during fit‑up. The sensor is optimised for platforms up to 400×400 mm, making it suitable for price‑computing scales, laboratory balances and small floor scales. The moderate output level and common connector type enable rapid pairing with most industrial junction boxes and weighing electronics, reducing engineering time and accelerating commissioning.
Application benefits that matter to operations
Designed for harsh production settings, this load cell suits industry, packaging, food and pharmaceutical workflows, as well as machine construction and research facilities. The stainless design and sealed enclosure help maintain hygiene and simplify cleaning protocols in food and pharma lines, while the robust construction supports continuous use on conveyor and checkweighing stations. The combination of a clear analogue signal and mechanical stability improves repeatability, which in turn supports consistent portioning, recipe compliance and statutory reporting.
For assistance with specification, compatibility or to arrange purchase of the KERN CP.30-3P7, contact Metav Werkzeuge for personalised advice — email info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271) to discuss integration and delivery from our Emmerich facility
Technical data
- Article number: CP.30-3P7
- Manufacturer: KERN
- GTIN: 4045761254053
- Origin: CN
Core technical data
- Nominal capacity: 30 kg
- Rated output: 2 mV/V
- Platform size (max): 400×400×0 mm
- Operating temperature: -35°C–65°C
- Weight: 0.39 kg
- Protection class: IP67
- OIML class: C3
Special features
- Material: stainless steel
- Connection: 6‑wire connection
- Standard: EN 60529
- Applications: industry, packaging, food & pharma, machine construction, research & development
- Compliance: RoHS conformant
- Note: OIML R60 C4 verification on request
FAQ
What capacity and signal does the load cell provide?
The CP.30-3P7 offers a 30 kg nominal capacity with a 2 mV/V rated output suitable for common weighing electronics.
Is the sensor suitable for use in wet or dusty environments?
Yes. The load cell is constructed from stainless steel and rated IP67 to EN 60529, making it resistant to dust and short immersion.
Can this load cell be used on a 400×400 mm platform?
The device is designed for platforms up to 400×400 mm, matching common bench and floor scale formats for price‑computing and laboratory use.
What connection and wiring are required for accurate readings?
A 6‑wire connection is provided to support excitation and sense lines, improving temperature compensation and measurement stability.
Is the module suitable for regulated weighing in commerce?
The unit is supplied to OIML class C3; OIML R60 C4 verification can be provided on request where higher legal metrology is required.
KERN — Origin: CN — Address and direct manufacturer contact not provided
Zubehör
Benefit from precise, network-ready weighing data and flexible interfaces: the combination of USB/RS-232 connectivity, IoT-ready operation and DIN-rail mounting simplifies integration into production lines and conveyor systems. Order the device directly via Metav Werkzeuge or contact our consultants for configuration support. KERN YKV-01 — Digital weigh transmitter with USB & RS-232, IoT-ready The KERN YKV-01 is a compact digital weigh transmitter designed for industrial scales and automated weighing systems, enabling fast data capture and reliable transfer to computers, PLCs and networked applications. IoT-ready for Industry 4.0 USB and RS-232 interfaces DIN-rail and wall mounting Configurable transmission formats Seamless data flow for automated production The transmitter delivers fast, configurable data transfer, making it suitable for integration into automated lines and process control systems. With native USB and RS-232 interfaces and freely configurable transmission formats, measurement values can be forwarded directly to PCs, PLCs or MES environments. The included software allows calibration, large-format display and export of results into common enterprise systems such as SAP and Oracle, reducing manual transcription and improving production traceability. Compact, robust design that fits industrial spaces Engineered for demanding environments, the unit combines a small footprint ()100×140×36 mm() with a lightweight construction of )0.33 kg(), so it fits neatly in control cabinets or on mounting rails. The plastic die-cast housing resists everyday workshop stresses while permitting both DIN-rail and wall mounting for flexible installation. Power is supplied via USB with a detachable power adapter and included EURO/UK/US adapters, eliminating the need for internal batteries and simplifying service routines. Rated for operation between -10°C and 40°C, the transmitter is suitable for a wide range of industrial settings. Accurate signals and simple configuration for reliable throughput Measurement tasks are handled with essential functions such as weigh and tare, while a measurement frequency of 10 Hz ensures smooth value updates for moving loads on conveyors. The bundled configuration tools enable fast setup and adjustment without specialised equipment, and compatibility with KERN weighing platforms streamlines roll-out across multiple stations. By converting raw readings into ready-to-use formats, the system reduces error sources and supports faster, more economic process control—reflecting a practical approach to Industry 4.0 integration and operational efficiency. For tailored advice on system integration and to procure the KERN YKV-01 through Metav Werkzeuge in Emmerich, contact our consultants by eMail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: YKV-01 Manufacturer: KERN GTIN: 4045761215290 Origin country: CN Facts Dimensions: 100×140×36 mm Weight: 0.33 kg Measurement frequency: 10 Hz Input voltage: 100 V - 240 V, 50 / 60 Hz Operating temperature: -10°C–40°C Special features Material: Plastic Data output: USB + RS-232 Power: USB with detachable power supply Included adapters: EURO; UK; US Mounting: Wall and DIN-rail Functions: Weigh, tare Configuration software included Compatible with all KERN weighing platforms No battery FAQ Is the transmitter compatible with existing KERN platforms? Yes. The KERN YKV-01 is designed for compatibility with KERN weighing platforms and can be connected to existing load cells and platforms without additional converters. Which interfaces are available for data transfer? The device provides USB and RS-232 outputs; transmission formats are freely configurable to match controller or PC requirements. Can the unit be powered from the USB port? Yes. The KERN YKV-01 is powered via USB and ships with a detachable power supply plus EURO, UK and US adapters. Is the transmitter suitable for conveyor-belt applications? Yes. With a 10 Hz measurement rate and configurable output, the transmitter supports dynamic weighing and data forwarding on conveyor systems and production lines. What mounting options are available? The unit supports both DIN-rail and wall mounting for flexible placement within control cabinets or on machine frames. Does the package include configuration tools? Yes. The KERN YKV-01 includes configuration software for calibration, large-format display and data export to other applications. Manufacturer: KERN — Dealer: Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930
Benefit from a compact, IoT-ready transmitter that combines versatile interfaces and simple USB power for fast integration and reliable weight data transfer; order directly via Metav Werkzeuge or consult our team for system-specific advice. KERN YKV-02 — Digital weight transmitter with Ethernet, USB and RS‑232 interfaces The KERN YKV-02 is a compact digital weight transmitter for industrial scales, designed to capture and forward weighing data to networks, PLCs and computers for automated process control. IoT-ready for Industry 4.0 integration Ethernet, USB and RS‑232 interfaces USB-powered with EU/UK/US adapters included DIN-rail and wall-mountable robust housing Rapid integration into automated systems The YKV‑02 enables fast data transfer from a weighing platform to higher‑level systems, supporting Ethernet, USB and RS‑232 interfaces as standard. This combination ensures straightforward connectivity to PCs, PLCs and networked systems, allowing measurement results to be converted into formats compatible with enterprise software (for example SAP or Oracle). The device’s IoT-ready architecture reduces integration time and helps maintain continuous production flow by enabling automated data capture and downstream processing. Dependable measurement performance with efficient power Designed for continuous operation, the transmitter samples at 10 Hz, delivering timely weight updates suitable for conveyor and batching applications. The unit is powered via the USB connector, simplifying wiring and enabling centralised power management; a detachable USB power supply with EU/UK/US plug options is included. Such a power arrangement lowers installation complexity while keeping the control cabinet tidy and energy use efficient, which supports predictable runtime and easier maintenance planning. Space-saving, robust design for industrial environments Housed in a robust plastic die‑cast enclosure, the transmitter combines compact dimensions (100×140×35 mm) with a low mass (0.34 kg), making it suitable for wall mounting or DIN‑rail installation in control panels. The compact form factor conserves valuable cabinet space and protects the electronics in standard industrial settings. Compatibility with existing KERN weighing platforms ensures a reliable mechanical and electrical interface, reducing the risk of retrofit issues when upgrading or expanding weighing points on lines and stations. Ready-to-use package with configuration tools The YKV‑02 is supplied with the necessary accessories to get a weighing point online quickly: the digital transmitter itself, a USB cable with detachable power supply, a DIN‑rail bracket and configuration software. The included software supports calibration, adjustment and large-format visualisation of measured values on a PC, plus export and data handover to other applications. Clear configuration options and freely selectable transmission formats make it easier to standardise data flow across multiple devices and reporting systems, shortening commissioning time and reducing engineering effort. Discuss system compatibility and integration planning with Metav Werkzeuge — request a tailored connectivity assessment for the KERN YKV‑02 from our Emmerich team or ask our consultants to verify the transmitter’s fit for a specific application Technical data Article number: YKV SKU: YKV-02 GTIN: 4045761220423 Manufacturer: KERN Origin: CN Numbers / Core technical data Dimensions (W×H×D): 100×140×35 mm Weight: 0.34 kg Measurement frequency: 10 Hz Operating temperature: -10 °C – 40 °C Input voltage (power adapter): 100 V – 240 V, 50 / 60 Hz Commodity code: 90160090 eClass: 27320101 Special features Data outputs: Ethernet + USB + RS‑232 Power: USB including detachable power supply Power adapters included: EU; UK; US Housing: robust plastic die‑cast Mounting: wall mount and DIN‑rail bracket included Functions: weighing, taring Software: configuration and data visualisation software included Compatibility: compatible with all KERN weighing platforms Typical applications: industry and manufacturing, chemical, food and pharma, building materials, logistics and packaging FAQ How is the YKV‑02 powered and what adapters are supplied? The KERN YKV‑02 is powered via USB; a detachable USB power supply is supplied with EU, UK and US plug adapters for flexible installation. Can the transmitter connect directly to a PLC or network? Yes. The transmitter offers Ethernet and RS‑232 interfaces in addition to USB, enabling direct connection to PLCs, networked systems and PCs for automated data exchange. What sample rate does the unit provide for weight readings? The unit provides a measurement frequency of 10 Hz, suitable for steady conveyor weighing and process monitoring where frequent updates are required. Is mounting hardware included for control cabinet installation? A DIN‑rail bracket and wall‑mounting option are included, allowing installation inside control cabinets or on panels with minimal additional hardware. Does the package include software for calibration and data export? Yes. The YKV‑02 is supplied with configuration software that supports calibration, large‑format display of values and export of results into formats compatible with enterprise systems. Manufacturer: KERN; Dealer: Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271