300g Single-Point Load Cell Eloxated Aluminium IP65, 0.9 mV/V, C3 - KERN
€65.00
Product information "300g Single-Point Load Cell Eloxated Aluminium IP65, 0.9 mV/V, C3 - KERN"
Take advantage of the combination of a compact single-point design, anodised aluminium construction and IP65 protection to ensure reliable weighing in harsh environments; order the sensor directly via Metav Werkzeuge or consult our specialists for integration advice.
CP 300-0P4 Single-Point Load Cell — 300 g, IP65 (KERN)
the CP 300-0P4 is a single-point load cell designed for compact platform scales and industrial weighing applications, offering a 300 g capacity and robust protection against dust and moisture
- Single-point design for platform integration
- Anodised aluminium for corrosion resistance
- IP65 protection for dusty and wet environments
- For platforms up to 200×200 mm
Consistent accuracy for compact platform weighing
The compact single-point geometry delivers stable load distribution across small weighing platforms, making it suitable for applications where repeatable results matter. With a nominal capacity of 300 g and an electrical sensitivity of 0.9 mV/V, the sensor provides a measurable analogue signal that can be amplified and digitised by standard weigh electronics. The designation OIML C3 indicates conformity with recognised accuracy classes for industrial weighing, which supports traceable measurements in manufacturing, packing and laboratory settings. This technical basis reduces uncertainty in counting, filling and dosing tasks.
Built to withstand production environments
Constructed from anodised aluminium, the cell combines low mass with mechanical resilience, reducing thermal inertia and easing mechanical installation. The IP65 rating (in accordance with EN 60529) protects against dust ingress and low-pressure water jets, extending service life in wash-down or dusty areas. Rated to operate between -20°C and 50°C, the sensor tolerates the temperature ranges common in packaging lines, food production and general industrial use. The overall light weight (0.07 kg) and compact footprint contribute to simplified mounting and transport logistics.
Straightforward integration with common scales and systems
The unit features a 4-lead connection, compatible with typical weighing electronics and junction boxes used in cash-register scales, bench scales and platform systems. Its maximum recommended platform dimension of 200×200 mm aligns with many standard scale designs, allowing direct replacement or new installations without bespoke structural changes. The nominal electrical output facilitates calibration workflows; technicians can apply standard adjustment procedures to achieve reliable zero and span settings, thereby simplifying line commissioning.
Practical advantages for maintenance and procurement
Designed for routine industrial use, the load cell requires minimal upkeep: surface cleanliness and secure mounting are the primary maintenance tasks. The mechanical and electrical specifications support quick identification of suitable amplifiers and controllers, reducing downtime during replacement. Supplied with CE and RoHS conformity, the component integrates into production equipment while meeting common regulatory expectations. For purchasers seeking supply reliability and product expertise, sourcing through an experienced distributor adds procurement certainty.
For tailored procurement and application support for this KERN single-point load cell, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss availability and integration options
Technical Data
- Article number: CP P4
- SKU: CP.300-0P4
- GTIN: 4045761221406
- Manufacturer: KERN
- Country of origin: CN
Numbers / Core technical data
- Nominal load: 300 g
- Nominal output: 0.9 mV/V
- OIML class: C3
- Ingress protection: IP65
- Operating temperature: -20°C–50°C
- Weight: 0.07 kg
- Maximum platform size: 200×200 mm
- Standard: EN 60529
Special features / Materials
- Material: Anodised aluminium
- Connection: 4-lead connection
- Compliance: CE and RoHS conformant
- Suitable for: cash-register scales, bench scales, platform scales
- Application areas: industry, packaging, food and pharma, machine building, research and development
FAQ
What capacity and accuracy class does this load cell offer? The load cell provides a capacity of 300 g and is specified to OIML C3, supporting accurate industrial weighing.
Is the sensor suitable for use in damp or wash-down environments? Yes, the cell has an IP65 ingress protection rating in line with EN 60529, offering protection against dust and low-pressure water jets.
Which platform size is recommended with this single-point cell? Compatibility is optimised for platforms up to 200×200 mm, matching many compact scale designs.
What material is the load cell made from and what are the benefits? The housing is anodised aluminium, offering corrosion resistance, low weight and suitability for many industrial applications.
How is the cell connected to weighing electronics? Connection is via a 4-lead wiring scheme, compatible with common amplifiers and scale controllers (calibration required to match system electronics).
KERN — Origin: China — Contact: not specified
Zubehör
Benefit from precise, network-ready weighing data and flexible interfaces: the combination of USB/RS-232 connectivity, IoT-ready operation and DIN-rail mounting simplifies integration into production lines and conveyor systems. Order the device directly via Metav Werkzeuge or contact our consultants for configuration support. KERN YKV-01 — Digital weigh transmitter with USB & RS-232, IoT-ready The KERN YKV-01 is a compact digital weigh transmitter designed for industrial scales and automated weighing systems, enabling fast data capture and reliable transfer to computers, PLCs and networked applications. IoT-ready for Industry 4.0 USB and RS-232 interfaces DIN-rail and wall mounting Configurable transmission formats Seamless data flow for automated production The transmitter delivers fast, configurable data transfer, making it suitable for integration into automated lines and process control systems. With native USB and RS-232 interfaces and freely configurable transmission formats, measurement values can be forwarded directly to PCs, PLCs or MES environments. The included software allows calibration, large-format display and export of results into common enterprise systems such as SAP and Oracle, reducing manual transcription and improving production traceability. Compact, robust design that fits industrial spaces Engineered for demanding environments, the unit combines a small footprint ()100×140×36 mm() with a lightweight construction of )0.33 kg(), so it fits neatly in control cabinets or on mounting rails. The plastic die-cast housing resists everyday workshop stresses while permitting both DIN-rail and wall mounting for flexible installation. Power is supplied via USB with a detachable power adapter and included EURO/UK/US adapters, eliminating the need for internal batteries and simplifying service routines. Rated for operation between -10°C and 40°C, the transmitter is suitable for a wide range of industrial settings. Accurate signals and simple configuration for reliable throughput Measurement tasks are handled with essential functions such as weigh and tare, while a measurement frequency of 10 Hz ensures smooth value updates for moving loads on conveyors. The bundled configuration tools enable fast setup and adjustment without specialised equipment, and compatibility with KERN weighing platforms streamlines roll-out across multiple stations. By converting raw readings into ready-to-use formats, the system reduces error sources and supports faster, more economic process control—reflecting a practical approach to Industry 4.0 integration and operational efficiency. For tailored advice on system integration and to procure the KERN YKV-01 through Metav Werkzeuge in Emmerich, contact our consultants by eMail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: YKV-01 Manufacturer: KERN GTIN: 4045761215290 Origin country: CN Facts Dimensions: 100×140×36 mm Weight: 0.33 kg Measurement frequency: 10 Hz Input voltage: 100 V - 240 V, 50 / 60 Hz Operating temperature: -10°C–40°C Special features Material: Plastic Data output: USB + RS-232 Power: USB with detachable power supply Included adapters: EURO; UK; US Mounting: Wall and DIN-rail Functions: Weigh, tare Configuration software included Compatible with all KERN weighing platforms No battery FAQ Is the transmitter compatible with existing KERN platforms? Yes. The KERN YKV-01 is designed for compatibility with KERN weighing platforms and can be connected to existing load cells and platforms without additional converters. Which interfaces are available for data transfer? The device provides USB and RS-232 outputs; transmission formats are freely configurable to match controller or PC requirements. Can the unit be powered from the USB port? Yes. The KERN YKV-01 is powered via USB and ships with a detachable power supply plus EURO, UK and US adapters. Is the transmitter suitable for conveyor-belt applications? Yes. With a 10 Hz measurement rate and configurable output, the transmitter supports dynamic weighing and data forwarding on conveyor systems and production lines. What mounting options are available? The unit supports both DIN-rail and wall mounting for flexible placement within control cabinets or on machine frames. Does the package include configuration tools? Yes. The KERN YKV-01 includes configuration software for calibration, large-format display and data export to other applications. Manufacturer: KERN — Dealer: Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930
Benefit from precise, network-ready weighing data and flexible interfaces: the combination of USB/RS-232 connectivity, IoT-ready operation and DIN-rail mounting simplifies integration into production lines and conveyor systems. Order the device directly via Metav Werkzeuge or contact our consultants for configuration support. KERN YKV-01 — Digital weigh transmitter with USB & RS-232, IoT-ready The KERN YKV-01 is a compact digital weigh transmitter designed for industrial scales and automated weighing systems, enabling fast data capture and reliable transfer to computers, PLCs and networked applications. IoT-ready for Industry 4.0 USB and RS-232 interfaces DIN-rail and wall mounting Configurable transmission formats Seamless data flow for automated production The transmitter delivers fast, configurable data transfer, making it suitable for integration into automated lines and process control systems. With native USB and RS-232 interfaces and freely configurable transmission formats, measurement values can be forwarded directly to PCs, PLCs or MES environments. The included software allows calibration, large-format display and export of results into common enterprise systems such as SAP and Oracle, reducing manual transcription and improving production traceability. Compact, robust design that fits industrial spaces Engineered for demanding environments, the unit combines a small footprint ()100×140×36 mm() with a lightweight construction of )0.33 kg(), so it fits neatly in control cabinets or on mounting rails. The plastic die-cast housing resists everyday workshop stresses while permitting both DIN-rail and wall mounting for flexible installation. Power is supplied via USB with a detachable power adapter and included EURO/UK/US adapters, eliminating the need for internal batteries and simplifying service routines. Rated for operation between -10°C and 40°C, the transmitter is suitable for a wide range of industrial settings. Accurate signals and simple configuration for reliable throughput Measurement tasks are handled with essential functions such as weigh and tare, while a measurement frequency of 10 Hz ensures smooth value updates for moving loads on conveyors. The bundled configuration tools enable fast setup and adjustment without specialised equipment, and compatibility with KERN weighing platforms streamlines roll-out across multiple stations. By converting raw readings into ready-to-use formats, the system reduces error sources and supports faster, more economic process control—reflecting a practical approach to Industry 4.0 integration and operational efficiency. For tailored advice on system integration and to procure the KERN YKV-01 through Metav Werkzeuge in Emmerich, contact our consultants by eMail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: YKV-01 Manufacturer: KERN GTIN: 4045761215290 Origin country: CN Facts Dimensions: 100×140×36 mm Weight: 0.33 kg Measurement frequency: 10 Hz Input voltage: 100 V - 240 V, 50 / 60 Hz Operating temperature: -10°C–40°C Special features Material: Plastic Data output: USB + RS-232 Power: USB with detachable power supply Included adapters: EURO; UK; US Mounting: Wall and DIN-rail Functions: Weigh, tare Configuration software included Compatible with all KERN weighing platforms No battery FAQ Is the transmitter compatible with existing KERN platforms? Yes. The KERN YKV-01 is designed for compatibility with KERN weighing platforms and can be connected to existing load cells and platforms without additional converters. Which interfaces are available for data transfer? The device provides USB and RS-232 outputs; transmission formats are freely configurable to match controller or PC requirements. Can the unit be powered from the USB port? Yes. The KERN YKV-01 is powered via USB and ships with a detachable power supply plus EURO, UK and US adapters. Is the transmitter suitable for conveyor-belt applications? Yes. With a 10 Hz measurement rate and configurable output, the transmitter supports dynamic weighing and data forwarding on conveyor systems and production lines. What mounting options are available? The unit supports both DIN-rail and wall mounting for flexible placement within control cabinets or on machine frames. Does the package include configuration tools? Yes. The KERN YKV-01 includes configuration software for calibration, large-format display and data export to other applications. Manufacturer: KERN — Dealer: Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930