40 kg Single-Point Load Cell, Anodised Aluminium, IP65, 2 mV/V, OIML C3 - KERN
€60.00
Product information "40 kg Single-Point Load Cell, Anodised Aluminium, IP65, 2 mV/V, OIML C3 - KERN"
Combine compact single‑point design, robust IP65 protection and a 40 kg rated capacity for consistent weighing performance in compact scales and platforms. Order the CP.40-3P1 single-point load cell directly via Metav Werkzeuge or ask our consultants if needed.
KERN CP.40-3P1 single-point load cell — anodised aluminium, 40 kg
A CP.40-3P1 single-point load cell designed for industrial, packaging and laboratory scales, compatible with platforms up to 250×350 mm and suited for price-counting, table and platform applications
- IP65 protection for wet environments
- Anodised aluminium body for corrosion resistance
- Rated capacity 40 kg, single-point design
- Suitable for platforms up to 250×350 mm
Accurate weighing from a compact footprint
The CP.40-3P1 is a single-point load cell engineered for small to medium platform scales where consistent accuracy and a low profile matter. Its design converts applied force into a uniform electrical signal across the sensing element, reducing eccentric loading errors on compact platforms up to 250×350 mm. This results in dependable repeatability for price-counting and bench scales, simplifying calibration cycles and ensuring measurements remain traceable in production processes.
Built for production environments and sanitary applications
A hard-wearing, anodised aluminium housing provides corrosion resistance while the IP65 rating protects the sensor from dust and water jets, supporting use in food‑grade and packaging lines. With an operating range from −35 °C to 65 °C, the load cell tolerates broad temperature swings typical in factory and warehouse environments. Compliance notes such as CE and RoHS signal conformity with common European safety and material standards, helping to meet regulatory requirements without compromising uptime.
Signal stability and integration for automated weighing
The transducer delivers a nominal output of 2 mV/V, a low-level analogue signal suited to precision indicators and instrumentation amplifiers; this permits fine resolution in control systems and statistical process control. A 4-wire connection enhances measurement stability by separating excitation and signal paths, while OIML class C3 categorisation confirms suitability for commercial weighing within its accuracy class. The result is a straightforward integration into automation, labelling or batching systems where consistent, traceable weight data reduces rework and supports process optimisation.
Contact Metav Werkzeuge in Emmerich for specification support and to secure the CP.40-3P1 single-point load cell from KERN; email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, transparent assistance
Technical Data
- Article number: CP.40-3P1
- Manufacturer: KERN
- GTIN: 4045761221222
- Origin: CN
Facts
- Rated capacity: 40 kg
- Nominal output: 2 mV/V
- Protection class: IP 65
- Operating temperature: −35 °C to 65 °C
- Platform dimensions: 250×350×0 mm
- Weight: 0.19 kg
- OIML class: C3
- Norm: EN 60529
- ECLASS: 27320302
Special features
- Material: Aluminium, anodised
- Connection: 4‑wire connection
- Compliance: CE and RoHS conform
- Applications: Industry, packaging, food & pharma, machine construction, R&D
- Suitable for price-counting, table and platform scales
- OIML R60 C4 or C5 on request
FAQ
What is the maximum load capacity of this load cell?
The CP.40-3P1 single-point load cell from KERN is rated for a maximum capacity of 40 kg, making it suitable for bench, table and small platform scales.
Is the sensor suitable for use in food or packaging environments?
Yes. The CP.40-3P1 features an anodised aluminium housing and an IP65 rating, offering protection against dust and water jets; its CE and RoHS conformity supports use in regulated food and packaging lines.
What electrical signal does the load cell provide and what does that mean for integration?
The device provides a nominal output of 2 mV/V; this low-level signal requires a compatible indicator or amplifier. The 4‑wire connection reduces measurement error and facilitates stable integration into weighing electronics.
Which platform size is recommended for this single-point load cell?
The transducer is designed for platforms up to 250×350 mm, ensuring even load distribution and accurate readings within that footprint.
Can the load cell be used in automated weighing systems?
Yes. With a stable analogue output, 4‑wire connection and OIML class C3 specification, the CP.40-3P1 from KERN is suited for automated batching, labelling and quality-control systems.
KERN · Origin: CN · Seller contact: Metav Werkzeuge — info@metav-werkzeuge.com · +49 2822 7131930
Zubehör
Benefit from precise, network-ready weighing data and flexible interfaces: the combination of USB/RS-232 connectivity, IoT-ready operation and DIN-rail mounting simplifies integration into production lines and conveyor systems. Order the device directly via Metav Werkzeuge or contact our consultants for configuration support. KERN YKV-01 — Digital weigh transmitter with USB & RS-232, IoT-ready The KERN YKV-01 is a compact digital weigh transmitter designed for industrial scales and automated weighing systems, enabling fast data capture and reliable transfer to computers, PLCs and networked applications. IoT-ready for Industry 4.0 USB and RS-232 interfaces DIN-rail and wall mounting Configurable transmission formats Seamless data flow for automated production The transmitter delivers fast, configurable data transfer, making it suitable for integration into automated lines and process control systems. With native USB and RS-232 interfaces and freely configurable transmission formats, measurement values can be forwarded directly to PCs, PLCs or MES environments. The included software allows calibration, large-format display and export of results into common enterprise systems such as SAP and Oracle, reducing manual transcription and improving production traceability. Compact, robust design that fits industrial spaces Engineered for demanding environments, the unit combines a small footprint ()100×140×36 mm() with a lightweight construction of )0.33 kg(), so it fits neatly in control cabinets or on mounting rails. The plastic die-cast housing resists everyday workshop stresses while permitting both DIN-rail and wall mounting for flexible installation. Power is supplied via USB with a detachable power adapter and included EURO/UK/US adapters, eliminating the need for internal batteries and simplifying service routines. Rated for operation between -10°C and 40°C, the transmitter is suitable for a wide range of industrial settings. Accurate signals and simple configuration for reliable throughput Measurement tasks are handled with essential functions such as weigh and tare, while a measurement frequency of 10 Hz ensures smooth value updates for moving loads on conveyors. The bundled configuration tools enable fast setup and adjustment without specialised equipment, and compatibility with KERN weighing platforms streamlines roll-out across multiple stations. By converting raw readings into ready-to-use formats, the system reduces error sources and supports faster, more economic process control—reflecting a practical approach to Industry 4.0 integration and operational efficiency. For tailored advice on system integration and to procure the KERN YKV-01 through Metav Werkzeuge in Emmerich, contact our consultants by eMail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: YKV-01 Manufacturer: KERN GTIN: 4045761215290 Origin country: CN Facts Dimensions: 100×140×36 mm Weight: 0.33 kg Measurement frequency: 10 Hz Input voltage: 100 V - 240 V, 50 / 60 Hz Operating temperature: -10°C–40°C Special features Material: Plastic Data output: USB + RS-232 Power: USB with detachable power supply Included adapters: EURO; UK; US Mounting: Wall and DIN-rail Functions: Weigh, tare Configuration software included Compatible with all KERN weighing platforms No battery FAQ Is the transmitter compatible with existing KERN platforms? Yes. The KERN YKV-01 is designed for compatibility with KERN weighing platforms and can be connected to existing load cells and platforms without additional converters. Which interfaces are available for data transfer? The device provides USB and RS-232 outputs; transmission formats are freely configurable to match controller or PC requirements. Can the unit be powered from the USB port? Yes. The KERN YKV-01 is powered via USB and ships with a detachable power supply plus EURO, UK and US adapters. Is the transmitter suitable for conveyor-belt applications? Yes. With a 10 Hz measurement rate and configurable output, the transmitter supports dynamic weighing and data forwarding on conveyor systems and production lines. What mounting options are available? The unit supports both DIN-rail and wall mounting for flexible placement within control cabinets or on machine frames. Does the package include configuration tools? Yes. The KERN YKV-01 includes configuration software for calibration, large-format display and data export to other applications. Manufacturer: KERN — Dealer: Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930
Benefit from a compact, IoT-ready transmitter that combines versatile interfaces and simple USB power for fast integration and reliable weight data transfer; order directly via Metav Werkzeuge or consult our team for system-specific advice. KERN YKV-02 — Digital weight transmitter with Ethernet, USB and RS‑232 interfaces The KERN YKV-02 is a compact digital weight transmitter for industrial scales, designed to capture and forward weighing data to networks, PLCs and computers for automated process control. IoT-ready for Industry 4.0 integration Ethernet, USB and RS‑232 interfaces USB-powered with EU/UK/US adapters included DIN-rail and wall-mountable robust housing Rapid integration into automated systems The YKV‑02 enables fast data transfer from a weighing platform to higher‑level systems, supporting Ethernet, USB and RS‑232 interfaces as standard. This combination ensures straightforward connectivity to PCs, PLCs and networked systems, allowing measurement results to be converted into formats compatible with enterprise software (for example SAP or Oracle). The device’s IoT-ready architecture reduces integration time and helps maintain continuous production flow by enabling automated data capture and downstream processing. Dependable measurement performance with efficient power Designed for continuous operation, the transmitter samples at 10 Hz, delivering timely weight updates suitable for conveyor and batching applications. The unit is powered via the USB connector, simplifying wiring and enabling centralised power management; a detachable USB power supply with EU/UK/US plug options is included. Such a power arrangement lowers installation complexity while keeping the control cabinet tidy and energy use efficient, which supports predictable runtime and easier maintenance planning. Space-saving, robust design for industrial environments Housed in a robust plastic die‑cast enclosure, the transmitter combines compact dimensions (100×140×35 mm) with a low mass (0.34 kg), making it suitable for wall mounting or DIN‑rail installation in control panels. The compact form factor conserves valuable cabinet space and protects the electronics in standard industrial settings. Compatibility with existing KERN weighing platforms ensures a reliable mechanical and electrical interface, reducing the risk of retrofit issues when upgrading or expanding weighing points on lines and stations. Ready-to-use package with configuration tools The YKV‑02 is supplied with the necessary accessories to get a weighing point online quickly: the digital transmitter itself, a USB cable with detachable power supply, a DIN‑rail bracket and configuration software. The included software supports calibration, adjustment and large-format visualisation of measured values on a PC, plus export and data handover to other applications. Clear configuration options and freely selectable transmission formats make it easier to standardise data flow across multiple devices and reporting systems, shortening commissioning time and reducing engineering effort. Discuss system compatibility and integration planning with Metav Werkzeuge — request a tailored connectivity assessment for the KERN YKV‑02 from our Emmerich team or ask our consultants to verify the transmitter’s fit for a specific application Technical data Article number: YKV SKU: YKV-02 GTIN: 4045761220423 Manufacturer: KERN Origin: CN Numbers / Core technical data Dimensions (W×H×D): 100×140×35 mm Weight: 0.34 kg Measurement frequency: 10 Hz Operating temperature: -10 °C – 40 °C Input voltage (power adapter): 100 V – 240 V, 50 / 60 Hz Commodity code: 90160090 eClass: 27320101 Special features Data outputs: Ethernet + USB + RS‑232 Power: USB including detachable power supply Power adapters included: EU; UK; US Housing: robust plastic die‑cast Mounting: wall mount and DIN‑rail bracket included Functions: weighing, taring Software: configuration and data visualisation software included Compatibility: compatible with all KERN weighing platforms Typical applications: industry and manufacturing, chemical, food and pharma, building materials, logistics and packaging FAQ How is the YKV‑02 powered and what adapters are supplied? The KERN YKV‑02 is powered via USB; a detachable USB power supply is supplied with EU, UK and US plug adapters for flexible installation. Can the transmitter connect directly to a PLC or network? Yes. The transmitter offers Ethernet and RS‑232 interfaces in addition to USB, enabling direct connection to PLCs, networked systems and PCs for automated data exchange. What sample rate does the unit provide for weight readings? The unit provides a measurement frequency of 10 Hz, suitable for steady conveyor weighing and process monitoring where frequent updates are required. Is mounting hardware included for control cabinet installation? A DIN‑rail bracket and wall‑mounting option are included, allowing installation inside control cabinets or on panels with minimal additional hardware. Does the package include software for calibration and data export? Yes. The YKV‑02 is supplied with configuration software that supports calibration, large‑format display of values and export of results into formats compatible with enterprise systems. Manufacturer: KERN; Dealer: Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271