50 kg Single-Point Stainless Steel Load Cell IP67, 2 mV/V, OIML C3 - KERN
€270.00
Product information "50 kg Single-Point Stainless Steel Load Cell IP67, 2 mV/V, OIML C3 - KERN"
Benefit from precise single-point weighing, stainless-steel durability and IP67 protection to keep production running reliably; the combination of robust construction, compact platform compatibility and stable signal output supports consistent weighing results in demanding environments. Order the CP.50-3P7 directly via Metav Werkzeuge or consult our specialists if further specification advice is required.
CP.50-3P7 Single-Point Load Cell — Stainless Steel, IP67, KERN
The CP.50-3P7 is a single-point load cell designed for compact bench and price-computing scales used in production, packaging and laboratory environments.
- Single-point load cell for compact platforms
- Stainless steel, RoHS-compliant construction
- IP67 protection for harsh environments
- 6-wire connection for stable signal transmission
Precise weighing for compact platforms and price-calculation systems
The single-point design provides consistent load distribution for small to medium platforms, compatible with a maximum platform size of 400×400 mm. With a nominal output of 2 mV/V and classification to OIML C3, the sensor supplies the stable, repeatable signal required for price-computing scales and bench weighing. This accuracy reduces rework and speeds up throughput by ensuring each weighing cycle yields reliable data suitable for commercial transactions and inventory control.
Built to withstand harsh production conditions
Constructed from stainless steel and certified RoHS, the assembly resists corrosion and contamination in food, packaging and industrial settings. An IP67 rating protects the electronics from dust and temporary immersion, while an operational temperature range of -35°C–65°C allows continuous use across refrigerated areas and warm production floors. The combination of material choice and ingress protection reduces downtime and extends service intervals, supporting dependable operation in demanding workflows.
Stable signals and straightforward integration
A 6-wire connection minimises measurement errors from cable resistance and temperature drift, ensuring consistent readings over long cable runs. The nominal output of 2 mV/V is industry-standard for straightforward amplifier and indicator compatibility; technicians can therefore integrate the sensor into existing weighing electronics without complex recalibration. The robust mechanical design and clear electrical characteristics simplify installation and accelerate system commissioning.
Versatile fit for multiple industries and compliance options
The sensor suits a wide range of applications including packaging, food and pharma and research and development, and is particularly recommended for bench scales and commercial price-calculating instruments. Compliance with OIML C3 provides a recognised quality benchmark for legal-for-trade scenarios, while execution to OIML R60 C4 is available on request for more stringent accuracy requirements. The stainless-steel construction and protection class make it suitable for production lines where hygiene and durability are essential.
Contact Metav Werkzeuge today to request the CP.50-3P7 from our Emmerich stock or to receive tailored technical guidance from our precision specialists via email or phone
Technical data
- Article number: CP.50-3P7
- Manufacturer: KERN
- Model: CP P7
- GTIN: 4045761254060
- ECLASS: 27320302
Facts
- Capacity: 50 kg
- Nominal output: 2 mV/V
- Temperature range: -35°C–65°C
- Maximum platform size: 400×400 mm
- Protection class: IP67
- OIML class: C3
- Weight: 0.39 kg
Special features
- Material: Stainless steel
- RoHS compliant
- 6-wire connection
- Suitable for bench scales and price-computing scales
- Application areas: Industry and manufacturing, packaging industry, food and pharma, machinery and plant engineering, research and development
- OIML R60 C4 execution available on request
FAQ
What is the maximum platform size supported by this load cell?
The CP.50-3P7 supports platforms up to 400×400 mm, making it suitable for compact bench and price-computing scales where uniform load distribution is required.
Is the sensor suitable for wet or hygienic environments?
Yes, the stainless-steel construction combined with an IP67 rating makes the CP.50-3P7 appropriate for environments with occasional water exposure and where hygienic materials are preferred.
How does the 6-wire connection benefit measurement stability?
The 6-wire connection used with this load cell compensates for lead resistance and temperature effects, improving signal integrity and ensuring consistent readings over time.
Can the load cell be used in legal-for-trade applications?
The product is classified to OIML C3; for higher accuracy legal-for-trade requirements, an execution to OIML R60 C4 is available on request.
What industries typically use this type of load cell?
This stainless-steel, single-point load cell is commonly deployed in packaging, food and pharma, general industry, machinery construction and research and development where compact, durable weighing modules are required.
Manufacturer: KERN, Country of origin: CN
Zubehör
Benefit from precise, network-ready weighing data and flexible interfaces: the combination of USB/RS-232 connectivity, IoT-ready operation and DIN-rail mounting simplifies integration into production lines and conveyor systems. Order the device directly via Metav Werkzeuge or contact our consultants for configuration support. KERN YKV-01 — Digital weigh transmitter with USB & RS-232, IoT-ready The KERN YKV-01 is a compact digital weigh transmitter designed for industrial scales and automated weighing systems, enabling fast data capture and reliable transfer to computers, PLCs and networked applications. IoT-ready for Industry 4.0 USB and RS-232 interfaces DIN-rail and wall mounting Configurable transmission formats Seamless data flow for automated production The transmitter delivers fast, configurable data transfer, making it suitable for integration into automated lines and process control systems. With native USB and RS-232 interfaces and freely configurable transmission formats, measurement values can be forwarded directly to PCs, PLCs or MES environments. The included software allows calibration, large-format display and export of results into common enterprise systems such as SAP and Oracle, reducing manual transcription and improving production traceability. Compact, robust design that fits industrial spaces Engineered for demanding environments, the unit combines a small footprint ()100×140×36 mm() with a lightweight construction of )0.33 kg(), so it fits neatly in control cabinets or on mounting rails. The plastic die-cast housing resists everyday workshop stresses while permitting both DIN-rail and wall mounting for flexible installation. Power is supplied via USB with a detachable power adapter and included EURO/UK/US adapters, eliminating the need for internal batteries and simplifying service routines. Rated for operation between -10°C and 40°C, the transmitter is suitable for a wide range of industrial settings. Accurate signals and simple configuration for reliable throughput Measurement tasks are handled with essential functions such as weigh and tare, while a measurement frequency of 10 Hz ensures smooth value updates for moving loads on conveyors. The bundled configuration tools enable fast setup and adjustment without specialised equipment, and compatibility with KERN weighing platforms streamlines roll-out across multiple stations. By converting raw readings into ready-to-use formats, the system reduces error sources and supports faster, more economic process control—reflecting a practical approach to Industry 4.0 integration and operational efficiency. For tailored advice on system integration and to procure the KERN YKV-01 through Metav Werkzeuge in Emmerich, contact our consultants by eMail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: YKV-01 Manufacturer: KERN GTIN: 4045761215290 Origin country: CN Facts Dimensions: 100×140×36 mm Weight: 0.33 kg Measurement frequency: 10 Hz Input voltage: 100 V - 240 V, 50 / 60 Hz Operating temperature: -10°C–40°C Special features Material: Plastic Data output: USB + RS-232 Power: USB with detachable power supply Included adapters: EURO; UK; US Mounting: Wall and DIN-rail Functions: Weigh, tare Configuration software included Compatible with all KERN weighing platforms No battery FAQ Is the transmitter compatible with existing KERN platforms? Yes. The KERN YKV-01 is designed for compatibility with KERN weighing platforms and can be connected to existing load cells and platforms without additional converters. Which interfaces are available for data transfer? The device provides USB and RS-232 outputs; transmission formats are freely configurable to match controller or PC requirements. Can the unit be powered from the USB port? Yes. The KERN YKV-01 is powered via USB and ships with a detachable power supply plus EURO, UK and US adapters. Is the transmitter suitable for conveyor-belt applications? Yes. With a 10 Hz measurement rate and configurable output, the transmitter supports dynamic weighing and data forwarding on conveyor systems and production lines. What mounting options are available? The unit supports both DIN-rail and wall mounting for flexible placement within control cabinets or on machine frames. Does the package include configuration tools? Yes. The KERN YKV-01 includes configuration software for calibration, large-format display and data export to other applications. Manufacturer: KERN — Dealer: Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930
Benefit from a compact, IoT-ready transmitter that combines versatile interfaces and simple USB power for fast integration and reliable weight data transfer; order directly via Metav Werkzeuge or consult our team for system-specific advice. KERN YKV-02 — Digital weight transmitter with Ethernet, USB and RS‑232 interfaces The KERN YKV-02 is a compact digital weight transmitter for industrial scales, designed to capture and forward weighing data to networks, PLCs and computers for automated process control. IoT-ready for Industry 4.0 integration Ethernet, USB and RS‑232 interfaces USB-powered with EU/UK/US adapters included DIN-rail and wall-mountable robust housing Rapid integration into automated systems The YKV‑02 enables fast data transfer from a weighing platform to higher‑level systems, supporting Ethernet, USB and RS‑232 interfaces as standard. This combination ensures straightforward connectivity to PCs, PLCs and networked systems, allowing measurement results to be converted into formats compatible with enterprise software (for example SAP or Oracle). The device’s IoT-ready architecture reduces integration time and helps maintain continuous production flow by enabling automated data capture and downstream processing. Dependable measurement performance with efficient power Designed for continuous operation, the transmitter samples at 10 Hz, delivering timely weight updates suitable for conveyor and batching applications. The unit is powered via the USB connector, simplifying wiring and enabling centralised power management; a detachable USB power supply with EU/UK/US plug options is included. Such a power arrangement lowers installation complexity while keeping the control cabinet tidy and energy use efficient, which supports predictable runtime and easier maintenance planning. Space-saving, robust design for industrial environments Housed in a robust plastic die‑cast enclosure, the transmitter combines compact dimensions (100×140×35 mm) with a low mass (0.34 kg), making it suitable for wall mounting or DIN‑rail installation in control panels. The compact form factor conserves valuable cabinet space and protects the electronics in standard industrial settings. Compatibility with existing KERN weighing platforms ensures a reliable mechanical and electrical interface, reducing the risk of retrofit issues when upgrading or expanding weighing points on lines and stations. Ready-to-use package with configuration tools The YKV‑02 is supplied with the necessary accessories to get a weighing point online quickly: the digital transmitter itself, a USB cable with detachable power supply, a DIN‑rail bracket and configuration software. The included software supports calibration, adjustment and large-format visualisation of measured values on a PC, plus export and data handover to other applications. Clear configuration options and freely selectable transmission formats make it easier to standardise data flow across multiple devices and reporting systems, shortening commissioning time and reducing engineering effort. Discuss system compatibility and integration planning with Metav Werkzeuge — request a tailored connectivity assessment for the KERN YKV‑02 from our Emmerich team or ask our consultants to verify the transmitter’s fit for a specific application Technical data Article number: YKV SKU: YKV-02 GTIN: 4045761220423 Manufacturer: KERN Origin: CN Numbers / Core technical data Dimensions (W×H×D): 100×140×35 mm Weight: 0.34 kg Measurement frequency: 10 Hz Operating temperature: -10 °C – 40 °C Input voltage (power adapter): 100 V – 240 V, 50 / 60 Hz Commodity code: 90160090 eClass: 27320101 Special features Data outputs: Ethernet + USB + RS‑232 Power: USB including detachable power supply Power adapters included: EU; UK; US Housing: robust plastic die‑cast Mounting: wall mount and DIN‑rail bracket included Functions: weighing, taring Software: configuration and data visualisation software included Compatibility: compatible with all KERN weighing platforms Typical applications: industry and manufacturing, chemical, food and pharma, building materials, logistics and packaging FAQ How is the YKV‑02 powered and what adapters are supplied? The KERN YKV‑02 is powered via USB; a detachable USB power supply is supplied with EU, UK and US plug adapters for flexible installation. Can the transmitter connect directly to a PLC or network? Yes. The transmitter offers Ethernet and RS‑232 interfaces in addition to USB, enabling direct connection to PLCs, networked systems and PCs for automated data exchange. What sample rate does the unit provide for weight readings? The unit provides a measurement frequency of 10 Hz, suitable for steady conveyor weighing and process monitoring where frequent updates are required. Is mounting hardware included for control cabinet installation? A DIN‑rail bracket and wall‑mounting option are included, allowing installation inside control cabinets or on panels with minimal additional hardware. Does the package include software for calibration and data export? Yes. The YKV‑02 is supplied with configuration software that supports calibration, large‑format display of values and export of results into formats compatible with enterprise systems. Manufacturer: KERN; Dealer: Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271