16mm Stechklemmhalter 1616 2C MGMN 200 For MGMN 200 Wendeplatten Innenkühlung - Teknik Makina
€27.00
Product information "16mm Stechklemmhalter 1616 2C MGMN 200 For MGMN 200 Wendeplatten Innenkühlung - Teknik Makina"
Take advantage of a compact solution that combines ISO 1616 shank stability, precise MGMN 200 insert compatibility and a 16 mm maximum parting depth for consistent production results — order the parting tool holder directly via Metav Werkzeuge or consult our specialists for integration advice.
Parting tool holder D011TM — MGMN 200 compatibility, 16 x 16 mm ISO shank (Teknik Makina)
A parting tool holder D011TM designed for precision parting and grooving tasks, compatible with MGMN 200 indexable inserts and optimised for stable clamping in 16 x 16 mm toolholders.
- ISO 1616 shank for stable clamping
- Compatible with MGMN 200 inserts
- Max parting depth 16 mm
- Quick clamp screw M4x10, key T15
Consistent cuts through rigid shank design
The holder is engineered around an ISO 1616 (16 x 16 mm) shank that delivers high rigidity during transverse cutting operations. This structural stability reduces vibration and lateral deflection, which directly improves repeatability and surface finish when parting or grooving. For production environments where cycle-to-cycle consistency matters, the solid shank geometry translates into fewer rejects and longer insert life.
Fast insert changes and proven compatibility
Designed specifically for MGMN 200 indexable inserts (Korloy), the clamping concept uses an M4x10 clamping screw with a T15 hex key interface for secure, repeatable fastening. This arrangement permits swift insert replacement and reliable seat contact, lowering downtime during tool changes and simplifying maintenance in busy turning cells. The accepted insert form also ensures access to a broad range of grades for different materials.
Geometry tuned for efficient parting
With a maximum parting depth of 16 mm and a cutting width of 2 mm, the tool holder is optimised for narrow-part cutting and groove preparation. The slightly enlarged cutting-head width of 16.2 mm provides the necessary clearance for secure insert seating while the overall length of 125 mm offers reach without compromising stiffness. These measured proportions help maintain cutting stability and enable predictable chip flow in many turning applications.
Integration, traceability and workshop fit
Weighing only 0.23 kg, the holder is compact to handle and store while being robust enough for daily shop use. The ISO designation and clear compatibility with Korloy inserts make it straightforward to specify in CAM setups and tool lists. For workshops consolidating tooling suppliers, this component supports a standardised approach to clamping and inventory, helping to reduce procurement complexity and speed up machine changeovers.
Contact Metav Werkzeuge today to discuss how the Teknik Makina parting tool holder D011TM fits specific production lines or to request tailored tooling advice from our specialists at Metav Werkzeuge
Technical data
-
Article number: D011TM
-
SKU: D011TM
-
Manufacturer: Teknik Makina
-
Shank designation: ISO 1616 (16 x 16 mm)
-
Overall length: 125 mm
-
Overall height: 16 mm
-
Cutting head width: 16.2 mm
-
Max parting depth: 16 mm
-
Cutting width: 2 mm
-
Compatible insert: MGMN 200 (Korloy)
-
Clamping screw: M4x10
-
Hex key: T15
-
Weight: 0.23 kg
Measurements / core data
- Shank width: 16 mm
- Shank height: 16 mm
- Cutting head width: 16.2 mm
- Max parting depth: 16 mm
- Cutting width: 2 mm
- Overall length: 125 mm
- Weight: 0.23 kg
Features / Compatibility
- Compatible with MGMN 200 indexable inserts (Korloy)
- ISO 1616 designation
- Clamping screw M4x10 with T15 key
- For parting and grooving applications
FAQ
What inserts fit this holder?
The holder accepts MGMN 200 indexable inserts; it is specified for MGMN geometry and listed compatibility includes Korloy grades.
What is the maximum parting depth?
Maximum parting depth is 16 mm, determined by the holder geometry and seat position.
Which shank size is required in the toolpost?
The holder uses an ISO 1616 (16 x 16 mm) shank and requires a compatible 16 x 16 mm toolpost slot.
How is the insert secured?
The insert is clamped with an M4x10 screw; a T15 hex key is the recommended tool for tightening.
Is this holder suitable for heavy roughing cuts?
The holder is intended for controlled parting and grooving up to its rated 16 mm depth; for heavy roughing, a holder with a larger shank and reinforced geometry is advisable.
Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
| Designation: | Stechklemmhalter |
|---|---|
| Diameter-1: | mm |
Passende Wendeplatten MetavCUT
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Product specifications for MGMN 200-02 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: MGMN200-02-CastIron Facts for the tool: ISO-Code: MGMN200-02 Clearance Angle: 30° Angle: 86° Radius: 0.2 Features Material: cemented carbide Usage for: Cast steel without hole Form: rhombic Chip Breaker: without Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-MGMN-200-02-Cast Iron-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features for MGMN CERMET 200-TD indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: MGMN200-TDC-CERMET ISO-Code: MGMN200-TD Material: CERMET Form: rhombic Clearance Angle: 30° without hole Chip Breaker: without Angle: 86° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-MGMN CERMET-200-TD-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Detail specifications MGMN 200-Al indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: MGMN200-Aluminium Figures for the tool: ISO-Code: MGMN200-Al Clearance Angle: 30° Angle: 86° Special features Material: cemented carbide Usage for: Aluminium without hole Form: rhombic Chip Breaker: without Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-MGMN-200-Al-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features indexable inserts MGMN 200-04 from MetavCUT Brand: MetavCUT Manufacturer Order Number: MGMN200-04-Stainless Data/ Figures: ISO-Code: MGMN200-04 Clearance Angle: 30° Angle: 86° Radius: 0.4 Features Material: cemented carbide Usage for: Stainless steel without hole Form: rhombic Chip Breaker: without Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-MGMN-200-04-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Specifications MGMN 200-04 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: MGMN200-04-CastIron Facts & Figures: ISO-Code: MGMN200-04 Clearance Angle: 30° Angle: 86° Radius: 0.4 Special features Material: cemented carbide Usage for: Cast steel without hole Form: rhombic Chip Breaker: without Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-MGMN-200-04-Cast Iron-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Design details inserts MGMN 200-02 from MetavCUT Brand: MetavCUT Manufacturer Order Number: MGMN200-02-Stainless Facts and Figures: ISO-Code: MGMN200-02 Clearance Angle: 30° Angle: 86° Radius: 0.2 Special features Material: cemented carbide Usage for: Stainless steel without hole Form: rhombic Chip Breaker: without Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-MGMN-200-02-Stainless Steel-MetavCUT 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications for MGMN 200-02 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: MGMN200-02-Aluminium Facts and Figures: ISO-Code: MGMN200-02 Clearance Angle: 30° Angle: 86° Radius: 0.2 Features Material: cemented carbide Usage for: Aluminium without hole Form: rhombic Chip Breaker: without Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-MGMN-200-02-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Features for indexable inserts MGMN 200-Ca from MetavCUT Brand: MetavCUT Manufacturer Order Number: MGMN200-CastIron Facts / Figures: ISO-Code: MGMN200-Ca Clearance Angle: 30° Angle: 86° Special features Material: cemented carbide Usage for: Cast steel without hole Form: rhombic Chip Breaker: without Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-MGMN-200-Ca-Cast Iron-MetavCUT 40END
You couldn't find the right insert? Let us help you!► Send us a picture of your insert directly by e-mail.► Send us a drawing by email► Send us your sample insert or drawing by post. Information on technical features for indexable inserts MGMN 200-04 from MetavCUT Brand: MetavCUT Manufacturer Order Number: MGMN200-04-Steel ISO-Code: MGMN200-04 Usage for: Steel Material: cemented carbide Form: rhombic Usable to the work on: Stahl Clearance Angle: 30° without hole Radius: 0.4 Chip Breaker: without Angle: 86° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-MGMN-200-04-Stahl-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Technical data for MGMN 200-St inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: MGMN200-Stainless Dataand Figures: ISO-Code: MGMN200-St Clearance Angle: 30° Angle: 86° Special features Material: cemented carbide Usage for: Stainless steel without hole Form: rhombic Chip Breaker: without Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-MGMN-200-St-Stainless Steel-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details for MGMN 200-St indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: MGMN200-Steel Facts for the tool: ISO-Code: MGMN200-St Clearance Angle: 30° Angle: 86° Features Material: cemented carbide Usage for: Steel without hole Form: rhombic Chip Breaker: without Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-MGMN-200-St-Stahl-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Performance features MGMN 200-04 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: MGMN200-04-Aluminium Facts and Figures: ISO-Code: MGMN200-04 Clearance Angle: 30° Angle: 86° Radius: 0.4 Features Material: cemented carbide Usage for: Aluminium without hole Form: rhombic Chip Breaker: without Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-MGMN-200-04-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details MGMN 200-02 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: MGMN200-02-Steel Dataand Figures: ISO-Code: MGMN200-02 Clearance Angle: 30° Angle: 86° Radius: 0.2 Features Material: cemented carbide Usage for: Steel without hole Form: rhombic Chip Breaker: without Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-MGMN-200-02-Stahl-MetavCUT 40END