MGMN 200-02 Indexable Insert for Cast Iron - MetavCUT

Take advantage of a compact solution that combines ISO 1616 shank stability, precise MGMN 200 insert compatibility and a 16 mm maximum parting depth for consistent production results — order the parting tool holder directly via Metav Werkzeuge or consult our specialists for integration advice. Parting tool holder D011TM — MGMN 200 compatibility, 16 x 16 mm ISO shank (Teknik Makina) A parting tool holder D011TM designed for precision parting and grooving tasks, compatible with MGMN 200 indexable inserts and optimised for stable clamping in 16 x 16 mm toolholders. ISO 1616 shank for stable clamping Compatible with MGMN 200 inserts Max parting depth 16 mm Quick clamp screw M4x10, key T15 Consistent cuts through rigid shank design The holder is engineered around an ISO 1616 (16 x 16 mm) shank that delivers high rigidity during transverse cutting operations. This structural stability reduces vibration and lateral deflection, which directly improves repeatability and surface finish when parting or grooving. For production environments where cycle-to-cycle consistency matters, the solid shank geometry translates into fewer rejects and longer insert life. Fast insert changes and proven compatibility Designed specifically for MGMN 200 indexable inserts (Korloy), the clamping concept uses an M4x10 clamping screw with a T15 hex key interface for secure, repeatable fastening. This arrangement permits swift insert replacement and reliable seat contact, lowering downtime during tool changes and simplifying maintenance in busy turning cells. The accepted insert form also ensures access to a broad range of grades for different materials. Geometry tuned for efficient parting With a maximum parting depth of 16 mm and a cutting width of 2 mm, the tool holder is optimised for narrow-part cutting and groove preparation. The slightly enlarged cutting-head width of 16.2 mm provides the necessary clearance for secure insert seating while the overall length of 125 mm offers reach without compromising stiffness. These measured proportions help maintain cutting stability and enable predictable chip flow in many turning applications. Integration, traceability and workshop fit Weighing only 0.23 kg, the holder is compact to handle and store while being robust enough for daily shop use. The ISO designation and clear compatibility with Korloy inserts make it straightforward to specify in CAM setups and tool lists. For workshops consolidating tooling suppliers, this component supports a standardised approach to clamping and inventory, helping to reduce procurement complexity and speed up machine changeovers. Contact Metav Werkzeuge today to discuss how the Teknik Makina parting tool holder D011TM fits specific production lines or to request tailored tooling advice from our specialists at Metav Werkzeuge Technical data Article number: D011TM SKU: D011TM Manufacturer: Teknik Makina Shank designation: ISO 1616 (16 x 16 mm) Overall length: 125 mm Overall height: 16 mm Cutting head width: 16.2 mm Max parting depth: 16 mm Cutting width: 2 mm Compatible insert: MGMN 200 (Korloy) Clamping screw: M4x10 Hex key: T15 Weight: 0.23 kg Measurements / core data Shank width: 16 mm Shank height: 16 mm Cutting head width: 16.2 mm Max parting depth: 16 mm Cutting width: 2 mm Overall length: 125 mm Weight: 0.23 kg Features / Compatibility Compatible with MGMN 200 indexable inserts (Korloy) ISO 1616 designation Clamping screw M4x10 with T15 key For parting and grooving applications FAQ What inserts fit this holder? The holder accepts MGMN 200 indexable inserts; it is specified for MGMN geometry and listed compatibility includes Korloy grades. What is the maximum parting depth? Maximum parting depth is 16 mm, determined by the holder geometry and seat position. Which shank size is required in the toolpost? The holder uses an ISO 1616 (16 x 16 mm) shank and requires a compatible 16 x 16 mm toolpost slot. How is the insert secured? The insert is clamped with an M4x10 screw; a T15 hex key is the recommended tool for tightening. Is this holder suitable for heavy roughing cuts? The holder is intended for controlled parting and grooving up to its rated 16 mm depth; for heavy roughing, a holder with a larger shank and reinforced geometry is advisable. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, purpose-built parting solution: the KL29TM delivers a 150 mm overall length, a 2 mm blade width and a 36 mm maximum plunge depth, enabling precise parting and controlled plunging in turning applications. Order directly via Metav Werkzeuge or contact our consultants for application advice. Parting blade KL29TM – Parting blade with 150 mm length and 2 mm blade width by Teknik Makina Parting blade KL29TM for metal-turning operations, designed for use with indexable inserts and standard clamping holders in workshop and industrial settings Compatible with Korloy MGMN 200 inserts 150 mm overall length Max plunge depth 36 mm 2 mm blade width Precise parting for repeatable production cycles The KL29TM is engineered for reliable parting where dimensional control matters. With a 150 mm length and a 25 mm cutting height, the geometry offers a stable tool overhang while the 2 mm blade width reduces material waste and heat build-up during the cut. This combination supports consistent cycle times and predictable tool life, helping to improve process repeatability and reduce set-up variations on the lathe. Compatibility and secure clamping for safe plunging Compatibility with Korloy MGMN 200 insert geometry ensures simple procurement and interchangeability with common indexable inserts. The blade is dimensioned for clamping systems that allow a maximum plunge depth of 36 mm, so holders rated for that depth should be selected to secure the tool properly. Explaining the term: MGMN 200 denotes a standard insert size and pocket form used widely in grooving and parting applications, which makes the KL29TM suitable for established insert toolflows in production workshops. Workshop benefits and operational suitability Narrow-profile blades such as this one reduce contact area and chip load, which often leads to cleaner parting faces and less workpiece distortion. The tool’s 32 mm blade height and robust section contribute to lateral stiffness, helping to suppress vibration during cut-off operations. Designed for machinists and production shops, the blade supports faster changeovers with standard clamping hardware and aligns with the aim of efficient material separation without excessive secondary finish work. For tailored advice and rapid supply from our Emmerich centre, contact Metav Werkzeuge—technical consultation and order processing are available via info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical data Article number: KL29TM Manufacturer: Teknik Makina ECLASS: 21181018 Overall length: 150 mm Blade height: 32 mm Cutting height: 25 mm Blade width: 2 mm Maximum plunge depth (holder-rated): 36 mm Compatible inserts: Korloy MGMN 200 Intended use: Parting / grooving operations in turning SKU: KL29TM FAQ Which inserts fit this parting blade? The KL29TM is compatible with Korloy inserts in the MGMN 200 size and pocket form for standard parting applications. What is the maximum plunge depth for safe operation? Maximum plunge depth is 36 mm as specified for the KL29TM and must be observed with an appropriate clamping holder. What are the key dimensions to check for setup? Important dimensions are overall length 150 mm, blade height 32 mm, cutting height 25 mm and blade width 2 mm for the KL29TM. Is this blade suitable for heavy overhangs? The KL29TM offers a balance of length and section for moderate overhangs; for extended reach operations, a holder with higher rigidity should be considered. What applications is this blade intended for? Designed for parting and grooving on lathes where Korloy MGMN 200 inserts are used and where a narrow cut width is required for efficient material separation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from secure 12 x 12 mm clamping, compatibility with Korloy MGMN 200 inserts and a compact 125 mm length for space-saving setups; order via Metav Werkzeuge or contact our consultants for specification checks. Parting tool holder D010TM (MGMN 200) by Teknik Makina — 12 x 12 mm, 125 mm length A parting tool holder (MGMN 200) engineered for reliable clamping of Korloy inserts in precise parting and grooving applications across workshop turning operations. Compatible with Korloy MGMN 200 inserts 12 x 12 mm robust clamping profile Max parting depth 12 mm Includes M4x10 clamping screw, T15 key Consistent clamping for repeatable parting quality The parting tool holder D010TM delivers a stable clamping platform through its 12 x 12 mm profile, ensuring repeatable results on short-run and series production. The 12.2 mm cutting-head width and the narrow 2 mm cutting edge support fine parting operations with minimal deflection. Where process stability is essential, the combination of compact geometry and low mass (0.13 kg) reduces vibration and helps maintain surface finish quality and dimensional control. Easy integration and fast setup in the machine tool With a total length of 125 mm and an overall height of 12 mm, the holder fits compact tool posts and is suited to tight turret positions. The clamping is secured with an M4x10 hex screw driven by a T15 key, providing a straightforward and fast insert change routine that supports uptime. Compatibility with the 2C MGMN 200 configuration and Korloy MGMN inserts simplifies inventory management and reduces set-up complexity for workshops standardised on this insert family. Robust design backed by dependable supply Designed for reliable everyday use, the holder’s dimensions follow the ISO-style 1212 designation to assist in selecting matching toolholders and inserts. The lightweight construction permits rapid handling without compromising clamping stability. Sourcing through a proven distributor ensures traceable supply: Metav provides consolidated stock and a quality filter for European workshops, supporting secure delivery and consistent availability for maintenance and production replacement needs. Contact Metav Werkzeuge for tailored technical advice and reliable supply of the Teknik Makina parting tool holder D010TM; enquiries: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: D010TM Manufacturer: Teknik Makina ISO designation: 1212 Compatible inserts: Korloy MGMN 200 Bohrstangen designation: 2C MGMN 200 Dimensions & Weights Width: 12 mm Height: 12 mm Cutting head width: 12.2 mm Overall length: 125 mm Overall height: 12 mm Weight: 0.13 kg Max parting depth: 12 mm Cutting width: 2 mm Clamping screw size: M4x10 Hex key size: T15 Features & Compatibility Fits MGMN 200 insert format Compact geometry for tight turrets Low-mass design to reduce vibration Correlates with ISO 1212 tooling conventions FAQ Which insert type fits this holder? The holder accepts Korloy MGMN 200 inserts; the item is specified for the MGMN 200 insert format. What is the maximum parting depth? Maximum parting depth is 12 mm, as indicated by the holder’s stechschwert specification. What fastening hardware is supplied or required? Clamping is executed with an M4x10 screw; a T15 hex key is used to secure the insert. What are the main dimensions to check for machine compatibility? Key dimensions: 12 x 12 mm clamping profile, 125 mm overall length and 12.2 mm cutting-head width. Is the holder suitable for compact tool posts? Yes — the compact length and low overall height make it appropriate for tight turret positions and compact tool posts. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com