Precision dial calipers for fast, error-free measurements
Dial calipers and precision calipers provide a mechanically reliable and highly readable solution for industrial metrology, using a dial that displays the millimetre fraction directly to reduce human reading errors and speed up repetitive inspections. Their hardened stainless steel construction and rack-and-pinion transmission ensure absolute play-free linear motion and lasting dimensional stability, while features like a locking screw and adjustable bezel enable consistent zeroing and secure retention of measured values. Ideal for workshop and quality-control environments, these tools deliver improved throughput and traceable accuracy for component inspection thanks to robust shock-protected mechanisms and precise graduations.
300mm Dial Caliper 0.02mm Resolution, Four-Function, DIN 862, Supplied in Case - Metav IndustryLine
Take advantage of the combination of clear analogue reading, robust mechanical design and DIN 862 compliance to secure reliable workshop measurements; order the dial caliper directly via Metav Werkzeuge or consult our specialists for application advice. Dial Caliper "TOP" 300 x 0.02 mm by Metav IndustryLine — analogue dial, 45 mm display Dial Caliper "TOP" 300 x 0.02 mm is an analogue dial caliper for general workshop and metalworking use, offering precise mechanical measurements up to 300 mm with a clear 45 mm dial display. 45 mm dial for fast reading 0.02 mm resolution for precise checks Four‑function measurement capability Locking screw for repeatable readings Consistent precision that supports quality control The analogue dial with a 45 mm face provides immediately legible readings, making routine checks both faster and less error‑prone. With a reading step of 0.02 mm, this caliper offers the highest grade of mechanical resolution commonly used in precision workshop tasks, which is especially valuable where sub‑millimetre reproducibility is required. Compliance with DIN 862 underlines suitability for standardised inspection routines, so measurement results can be relied upon for process control and incoming inspection. Designed for versatile measurement tasks This instrument combines four measurement modes — inside, outside, depth and step — in a compact form that suits everyday metalworking and maintenance work. The dual jaw lengths (60/25 mm) extend versatility for measuring narrow bores and stepped components without changing tools. A robust locking screw secures the slide for transfer measurements, improving repeatability when recording values or passing components between workstations. Practical features for workshop efficiency Built as a straightforward mechanical instrument, the caliper requires no batteries and delivers dependable readings in environments where electronics may be inconvenient. The rear‑side thread table supports quick reference during machining operations, reducing lookup time at the bench. The simple, tactile operation of an analogue dial instrument fosters rapid training for staff and predictable outcomes during repetitive measurement tasks. Contact Metav Werkzeuge for specific application advice on the Metav IndustryLine dial caliper "TOP" (SKU M202.132) and to arrange stock availability or a technical consultation tailored to workshop requirements. Technical data Article number: M202.132 GTIN: 4054469102306 EClass: 21170344 Category: Calipers (measuring instruments) Dimensions & accuracy Measuring range: 0–300 mm Resolution: 0.02 mm Dial diameter: 45 mm Jaw length: 60/25 mm Standard: DIN 862 Features & functions Analogue dial caliper Four‑way measurement: inside, outside, depth, step Locking screw (feststellschraube) Thread reference table on reverse (gewindetabelle auf der rückseite) FAQ What measurement tasks is this caliper suitable for? The dial caliper "TOP" is suitable for routine workshop measurements in metalworking and maintenance, covering outside, inside, depth and step measurements up to 300 mm. What accuracy and resolution can be expected? This analogue instrument delivers a resolution of 0.02 mm and is designed to meet the precision range typical for high‑quality mechanical calipers. Does the instrument meet industry standards? Yes, the caliper is specified to DIN 862, ensuring compatibility with standard inspection procedures. Are there practical features that speed up shopfloor work? The large 45 mm dial, locking screw and the thread table on the reverse of the slide are intended to reduce handling time and speed up repetitive measurement tasks with the caliper "TOP". Which identifier should be used when ordering or enquiring? Refer to SKU M202.132 and GTIN 4054469102306 when specifying the Metav IndustryLine dial caliper in purchase orders or technical enquiries. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Caliper Measuring Jaw Adapter For 5.5mm Jaw Thickness - Metav IndustryLine
Take advantage of a compact, purpose-built accessory that converts standard caliper jaws into a specialised measuring interface: the adapter accepts jaw thicknesses up to 5.5 mm, fits calipers with a measuring range up to 500 mm and mounts on a Ø5 mm fitting for secure attachment. Order the adapter directly via Metav Werkzeuge or consult our specialists for application advice. Caliper jaw adapter (for calipers up to 500 mm) — Metav IndustryLine, Ø5 mounting, 5.5 mm jaw capacity Caliper jaw adapter (for calipers up to 500 mm) is a compact attachment that converts standard caliper jaws into a dedicated measuring interface for medium-range workshop tasks, ideal where quick adaptation is required without changing instruments Fits calipers up to 500 mm Accepts jaw thickness up to 5.5 mm Ø5 mm mounting bore for secure fit Lightweight 50 g for minimal load Consistent precision for medium-range measuring tasks This accessory is engineered as a precision caliper adapter for calipers with a maximum measuring range of 500 mm, placing it in the workshop's medium‑range category. By allowing a defined contact geometry on existing jaws, the adapter reduces variability introduced by improvised fixtures and supports repeatable measurements across production batches. The compact construction and 50 g mass keep the additional load negligible, preserving the instrument's handling and helping to avoid bending or offset errors that can occur with heavier retrofits. Straightforward compatibility and quick fitting The adapter secures onto the caliper jaw via a Ø5 mm mounting interface, a common workshop standard that ensures a tight, concentric fit on compatible jaws. Acceptance of jaw thicknesses up to 5.5 mm means the part suits many standard and robust jaw designs found in industrial and bench calipers. Its role as an attachment for measuring jaws simplifies conversion of an existing analogue instrument into a specialised gauge without the need for new callipers, saving procurement time and reducing downtime in the measuring process. Practical benefits for everyday workshop use Designed as a pragmatic accessory rather than a complete instrument, the adapter enhances workflow by enabling tailored contact forms for specific measurement tasks — for example, reaching into tight grooves or creating a repeatable stop for stepped measurements. The solution supports the shop-floor emphasis on efficiency: one adapted caliper can replace multiple specialised tools, lowering equipment complexity. Traceability and repeatability are improved when the same adapter is used consistently across checks, which is particularly valuable for batch control and fixture set‑ups. Built for durability and predictable handling Although compact, the adapter is manufactured to withstand routine workshop use while maintaining alignment and seat integrity on the caliper jaw. Its low mass minimises influence on the caliper's dynamics during measurement, and the defined mounting geometry reduces play once fitted. As an accessory that complements existing metrology equipment, it contributes to a more organised measurement routine and helps technicians focus on result quality rather than frequent tool changes. Contact Metav Werkzeuge for tailored advice and to obtain the Metav IndustryLine caliper jaw adapter (SKU M240.312) from our Emmerich quality centre Technical data SKU: M240.312 GTIN: 4054469159515 ECLASS: 21131720 Tariff number: 90178090 Weight: 0.05 kg Facts Measuring range compatibility: up to 500 mm Maximum jaw thickness accepted: 5.5 mm Mounting bore: Ø5 mm Mass: 0.05 kg (50 g) Special features Attachment for caliper measuring jaws Suited to analogue calipers Designed for medium-range calipers (up to 500 mm) Compact, lightweight accessory Enables defined contact geometry for repeatable measures FAQ Which calipers are compatible with this adapter? The adapter is compatible with calipers that accept an accessory on a Ø5 mm mounting and have jaw thicknesses up to 5.5 mm; it is intended for calipers with a measuring range up to 500 mm and is supplied as the Metav IndustryLine caliper jaw adapter (SKU M240.312). Can the adapter be used on digital calipers as well as analogue ones? Yes; while the design is intended for analogue calipers, the Metav IndustryLine adapter can be fitted to many digital models provided the jaw geometry and a Ø5 mm mounting are available. Does the adapter affect measurement accuracy? When fitted correctly, the adapter provides a consistent contact geometry that improves repeatability; the low mass (approximately 50 g) minimises influence on the caliper's handling and thus limits additional measurement error. What workshop tasks benefit most from this accessory? The adapter is particularly useful for stepped measurements, internal features accessed via modified jaws and repeat checks where a defined, repeatable contact is required; it adapts standard calipers for medium-range metrology tasks without needing a dedicated gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
70mm 2mm Tip Measuring Insert R0.5 x 2 x 40mm For Depth Measurements - Metav IndustryLine
Taking advantage of a precision R0.5 tip and a rigid 70 mm shank, this measuring insert provides repeatable contact in deep or recessed measurement points while remaining compact and easy to mount. Order the measuring insert directly via Metav Werkzeuge or consult Metav's specialists for application advice. Measuring insert with tip for caliper adapter – R0.5 × 2 × 40 mm, 70 mm shank (Metav IndustryLine) The measuring insert combines a fine rounded tip geometry with a 70 mm mounting shank for accurate access to deep features and a stable hold in caliper adapters. Fine rounded tip R0.5 for precise contact 70 mm shank for stable mounting Compatible with caliper adapters Suited for recessed and deep-point measurement Accuracy where access is restricted The finely formed R0.5 tip gives a small, defined contact area that reduces positional ambiguity when probing narrow bores, steps or recesses. By concentrating contact force through a small radius, the probe minimises lateral play and improves repeatability compared with blunt probes. The geometry labelled R0.5 × 2 × 40 mm indicates a tip radius of 0.5 mm with a shaft section suitable for confined spaces, making the insert particularly useful when standard jaws cannot reach. This results in faster inspection cycles and fewer rejected parts due to measurement uncertainty. Reliable mounting and workshop compatibility A 70 mm shank and Ø5 mounting interface ensure the insert seats securely in commercially available caliper adapters and fixtures. The compact mass (approx. 0.05 kg) keeps the centre of gravity close to the adapter, reducing vibration and lever effects during manual measuring operations. As an accessory for analogue calipers, the probe integrates without electronics or data output, preserving the simplicity of traditional measuring workflows while extending the application range of existing tools. The robust design supports frequent in‑shop use and straightforward replacement when wear occurs. Practical benefits for quality control and inspection Designed as a practical metrology accessory, the insert shortens set‑up time for hard‑to‑reach checks and reduces the need for special fixturing. The product is categorised as measurement accessory and is intended to complement standard caliper equipment, improving the handling of recessed surfaces without altering the primary instrument. For specific measurement tasks or compatibility checks with a particular caliper adapter, Metav IndustryLine technical staff can provide guidance on fit and suitability to ensure the insert meets inspection requirements. Contact Metav Werkzeuge today to confirm adapter compatibility and arrange supply from Emmerich for prompt delivery and expert advice Technical data Article number: M240.321 GTIN: 4054469159546 Category: Accessory (measuring devices) Type: Analogue measuring insert Core measurements Shank length: 70 mm Mounting diameter: Ø5 mm Tip geometry: R0.5 × 2 × 40 mm Weight: 0.05 kg Customs tariff: 90178090 Design and features Intended use: Deep/recessed point measurement Compatibility: Caliper adapters (analogue) Construction: Probe tip and shaft for adapter mounting Delivery form: Single insert, accessory item FAQ What is the intended use of this insert? The measuring insert is intended for deep or recessed point measurements where standard caliper jaws cannot reach; it fits into caliper adapters to extend measurement capability. Which calipers or adapters are compatible with the insert? Compatibility depends on the adapter's mounting interface; the insert uses a Ø5 mm shank and is suitable for common caliper adapters designed to accept this diameter. Is the tip suitable for contact with soft surfaces? The R0.5 rounded geometry is small and precise; it reduces indentation risk compared with sharper probes but care is advised on very soft materials to avoid surface marking. Can the insert be used with digital calipers? The insert is a mechanical accessory; it can be used with calipers that accept the Ø5 shank, including digital models that have suitable adapters, but the insert itself provides no electronic output. How does the insert affect measurement repeatability? By providing a defined contact radius and a stable 70 mm shank, the probe improves positional consistency for recessed features, supporting more repeatable results in routine inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
±8N Force Adapter With Roller For Digital Precision Caliper Series Measurement Compatible - Metav IndustryLine
Take advantage of the combination of consistent ±8 N force application and a low inertial mass for faster, more reproducible inline checks; order directly via Metav Werkzeuge or consult the team for integration advice. Force adapter for digital calipers M401.041 — ±8 N roller accessory (Metav IndustryLine) The force adapter for digital calipers M401.041 is an accessory that applies a controlled rolling force to a caliper jaw, designed to standardise contact pressure during comparative and serial measurements with digital calipers. Precise ±8 N measuring force Compatible with thumb‑roller calipers Lightweight — only 28 g Consistent contact pressure for repeatable measurement results A controlled contact force reduces operator‑dependent variability; the ±8 N specification ensures a uniform load that stabilises the measurement interface. By converting manual thumb pressure into a defined rolling force via the integrated roller, the accessory improves repeatability in production inspection and end‑of‑line checks. This stabilisation shortens decision cycles and lowers the rate of false rejects by making each contact between jaw and workpiece more consistent. Easy retrofit and minimal influence on handling Integration requires no complex setup: the adapter mounts to calipers with a thumb‑roller interface and keeps the original handling characteristics intact. The very low mass (approx. 28 g) means negligible added inertia, so short measuring strokes and tactile feel remain virtually unchanged. Compatibility with standard digital calipers allows existing instruments to be upgraded for force‑controlled measurements without replacing the measuring device, improving throughput while keeping investment low. Practical benefits for inspection and serial testing Using a dedicated force accessory speeds up repetitive measuring tasks by removing the need for operator training on applied pressure. The roller design preserves surface finish and prevents point loading on delicate parts while delivering a consistent contact condition for each cycle. Supplied as an accessory from Metav IndustryLine, the unit supports efficient workflows in workshop, toolroom and small‑scale production environments where reliable, repeatable contact force is required. For advice on fitting the adapter or to order the M401.041, contact Metav Werkzeuge GmbH in Emmerich — info@metav-werkzeuge.com or +49 2822 7131930 — the Metav team will assist with integration and delivery options Technical data SKU: M401.041 GTIN: 4054469143651 Weight: 0.028 kg Tariff number: 90178090 Category: Accessory for measuring instruments Core measurements Measuring force: ±8 N Mass: 0.028 kg eCl@ss: 21160592 Special features Roller for consistent contact Compatible with digital calipers with thumb roller Accessory for serial and comparative measurement FAQ How does the adapter ensure consistent measurement force? The adapter applies a defined ±8 N rolling force through its roller mechanism, so each contact is made with reproducible pressure, reducing operator influence on readings. Can it be fitted to any digital caliper? The adapter is designed for calipers that use a thumb roller for jaw actuation; the M401.041 fits standard thumb‑roller interfaces used on many digital calipers. Does the adapter affect measurement speed or handling? The low mass (approx. 28 g) adds minimal inertia, preserving normal handling and allowing quick, repeatable measuring cycles without perceptible slowdown. Is the accessory suitable for delicate surface finishes? Yes, the roller distributes contact pressure and avoids point loading, helping to protect delicate surfaces while maintaining consistent contact conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø5 Internal Groove Measuring Insert From 15 mm, Max Depth 1.4 mm Width 1.2 mm - Metav IndustryLine
The compact measuring insert combines a secure Ø5 mm shank connection with a slim profile for reliable inspection of internal grooves from 15 mm; the defined 1.4 mm maximum depth and 1.2 mm width deliver repeatable results and reduced rework. Take advantage of the insert’s precise fit and quick mounting to maintain steady production flow. Order the M240.325 directly via Metav Werkzeuge or ask our consultants if needed. M240.325 Internal-groove measuring insert for caliper adapters — 1.2 mm width, 1.4 mm depth (Metav IndustryLine) A M240.325 internal-groove measuring insert designed for use with caliper adapters, suitable for internal grooves from 15 mm with a maximum depth of 1.4 mm and a width of 1.2 mm. Precision-ground insert for internal grooves Designed for grooves from 15 mm diameter Max depth 1.4 mm, width 1.2 mm Faster, repeatable internal-groove inspections The measuring insert is engineered to speed up routine checks while keeping results consistent. Fitted on a caliper adapter, the Ø5 mm shank secures the insert in the holder so measurements are taken with minimal play, improving repeatability and lowering measurement scatter. The clearly defined 1.4 mm depth limit and 1.2 mm width make it straightforward to confirm compliance for narrow grooves, which reduces the need for rework and shortens inspection cycles on the shop floor. Designed for tight grooves and reliable fit A slim profile and precisely machined contact faces ensure the insert reaches confined internal features without damaging edges. The geometry is optimised for internal keyways and narrow channels starting at 15 mm, providing a firm seating against the groove flanks and improving reading stability. Where speed of inspection matters, the insert’s design permits quick engagement and withdrawal from the groove, enabling efficient quality control on assemblies and components. Workshop integration that keeps production moving As an accessory for caliper adapters, this insert integrates directly into existing digital or analogue calipers equipped with compatible holders, avoiding the need for a separate specialised gauge. Lightweight at approximately 0.05 kg and with a compact 70 mm overall length, it is easy to store and swap between tasks. The insert supports a pragmatic inspection workflow: defined limits, secure mounting and rapid handling translate into lower inspection times and more predictable throughput for repetitive measurements. Contact Metav Werkzeuge for application advice or to secure spare inserts for Metav IndustryLine products: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M240.325 GTIN: 4054469159577 Weight: 0.05 kg Length: 70 mm Shank diameter: Ø5 mm Max. measuring depth: 1.4 mm Width: 1.2 mm Facts Suitable groove start: from 15 mm diameter Category: Accessory (measuring devices) SKU: M240.325 ECLASS: 21170324 Special features For internal grooves / keyways Mounts on caliper adapters Compact, lightweight design Ideal for narrow, shallow grooves FAQ What groove sizes can be measured with this insert? The insert is intended for internal grooves starting at 15 mm diameter and is specified for a maximum depth of 1.4 mm and width of 1.2 mm; this makes it suitable for narrow keyways and similar features. Is the insert compatible with digital and analogue calipers? Yes. The M240.325 mounts via a Ø5 mm shank into standard caliper adapters, so it can be used with both digital and analogue calipers that accept the compatible holder. How does the insert improve measurement repeatability? Secure mounting and precise contact geometry reduce movement and operator influence, resulting in more consistent readings and improved repeatability during series inspections. Can the insert be used for external measurements or other tasks? This insert is specifically designed for internal groove inspection and is supplied for use with caliper adapters; external measurements require suitably configured jaws or other dedicated inserts. What is the weight and size of the insert for handling and storage? The insert weighs approximately 0.05 kg and measures 70 mm in length, offering a compact, lightweight solution that is simple to handle in the workshop. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø5 mm Anreißspitze, Länge 60 mm, für Messadapter von Messschiebern - Metav IndustryLine
Die Kombination aus Aufnahme Ø 5 mm, Länge 60 mm und geringem Gewicht sorgt für präzise Markiergebnisse bei kompakter Handhabung. Ergänzen Sie Ihre Werkstatt mit der passenden Spitze für Messadapter und bestellen Sie direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Mess- und Anreißspitze Ø 5 mm, Länge 60 mm — Messspitze für Messadapter und Messschieber Mess- und Anreißspitze Ø 5 mm, Länge 60 mm bietet präzises Anreißen und stabile Handhabung für feine Markierarbeiten mit Messadapter und Messschieber. Mess- und Anreißspitze »M240.320« von Metav IndustryLine Aufnahme Ø 5 mm für gängige Adapter Länge 60 mm für sichere Führung Leichtes Gewicht: 0,05 kg Geeignet für analoge Messschieber Kompakte Präzision für Markieraufgaben Die Mess- und Anreißspitze ist speziell für den Einsatz mit Messadaptern an Messschiebern konzipiert und ermöglicht saubere, wiederholbare Anrisslinien. Durch die reduzierte Aufnahme von 5 mm passt die Spitze auf verbreitete Adapterlösungen und sorgt so für hohe Kompatibilität in der Werkstatt. Die Länge 60 mm bietet ausreichend Hebelarm für kontrollierte Führbarkeit ohne unnötige Überlänge, wodurch Markierfehler reduziert werden. Diese Ausführung richtet sich an Anwender, die bei Montage‑ und Fertigungsarbeiten auf präzise Positionierung angewiesen sind. Ergonomie und Bedienkomfort bei Routinearbeiten Mit einem Gewicht von nur 0,05 kg lässt sich die Spitze komfortabel und ermüdungsarm führen, was bei häufigen Anrissen Zeit und Fehler reduziert. Die Ausführung für analoge Messschieber vereinfacht die Nachrüstung vorhandener Messmittel ohne zusätzliche Elektronik. Anwender profitieren von einer robusten Handhabung und klaren Markierpunkten; dadurch werden Folgeprozesse wie Bohren oder Senken genauer und effizienter. Die Konstruktion ist auf wiederholte Nutzung ausgelegt; dadurch bleibt die Markiergenauigkeit über viele Zyklen erhalten. Zielgruppen und typische Anwendungen Die Spitze eignet sich für Feinmechanik, Metallbau, Werkzeugbau sowie für anspruchsvolle Hobbyanwender, die mit Messschiebern arbeiten. Typische Anwendungen sind das Anreißen von Bohrzentren, das Übertragen von Maßlinien auf Werkstücke und das Markieren von Montagepositionen. Als Zubehörkategorie ergänzt dieses Produkt vorhandene Messmittel und hilft, Mess‑ und Fertigungsprozesse wirtschaftlicher zu gestalten. Durch die einfache Montage am Adapter wird die Spitze schnell zum festen Bestandteil der Werkstattausstattung. Empfehlung: Ergänzen Sie Ihre Messausstattung mit der Mess- und Anreißspitze Ø 5 mm von Metav IndustryLine und bestellen Sie über Metav Werkzeuge; bei technischen Fragen erreichen Sie uns per eMail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: M240.320 Marke: Metav IndustryLine Bezeichnung: Mess- u. Anreißspitze für Messadapter für Messschieber Ø 5 mm, Länge 60 mm GTIN: 4054469159522 Zolltarifnummer: 90178090 Daten Länge: 60 mm Gewicht: 0,05 kg Aufnahme: Ø 5 mm Besonderheiten Analoge Ausführung für Messschieber Kategorie: Messgeräte > Zubehör Story: Zubehör FAQ Wie wird die Spitze am Messadapter befestigt? Die Mess- und Anreißspitze Ø 5 mm von Metav IndustryLine wird direkt in den vorgesehenen Adapteraufnahmeschaft gesteckt und mechanisch befestigt; die Aufnahme Ø 5 mm ist auf gängige Adapter abgestimmt, sodass eine sichere Verbindung gewährleistet ist. Für welche Messschieber ist die Spitze geeignet? Die Spitze ist für Messadapter mit einer Aufnahme Ø 5 mm ausgelegt und kann sowohl an analogen Messschiebern als auch an passenden Adapterlösungen verwendet werden; prüfen Sie die Adapteraufnahme Ihres Messschiebers auf Kompatibilität mit der Mess- und Anreißspitze M240.320. Eignet sich das Produkt für Feinmechanik? Ja, die Mess- und Anreißspitze M240.320 ist speziell für präzise Markierarbeiten konzipiert und eignet sich damit besonders für Feinmechanik, Werkzeugbau und detailorientierte Fertigungsprozesse. Welche Vorteile bringt die Länge von 60 mm? Die Länge 60 mm bietet ein gutes Verhältnis aus Führbarkeit und Hebelarm, wodurch sich die Spitze sicher handhaben lässt und saubere Markierlinien erzielt werden können, ohne unnötige Überlänge. Ist die Spitze einzeln nachbestellbar? Die Mess- und Anreißspitze Ø 5 mm ist als Ersatzteil und Zubehör verfügbar; verwiesen wird auf die Artikelnummer M240.320 für schnelle Nachbestellung und Identifikation. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, error‑free analogue readings for production
Dial calipers (also referred to as dial indicator calipers or analogue dial calipers) deliver rapid and unambiguous millimetre fractions via an integrated dial, making them ideal for repetitive inspection tasks in industrial workshops and quality control labs. By presenting the fractional reading directly on the dial, these tools drastically reduce manual interpretation errors and accelerate throughput on the shop floor.
How the mechanism ensures consistent accuracy
The measuring action is transmitted by a high‑precision rack-and-pinion system, which converts linear movement into exact pointer rotation without play. A shock‑protected mechanism and hardened stainless steel construction ensure long‑term form stability and corrosion resistance under daily workshop conditions. A lockable bezel allows easy zero setting, while a locking screw secures results for transfer or documentation.
Practical benefits on the shop floor
- Faster inspection cycles thanks to the integrated dial that removes the need for manual fractional calculation.
- Improved repeatability and lower scrap rates by eliminating common reading errors.
- Robust performance in harsh environments through hardened stainless steel and impact protection.
- Simple calibration and zeroing via the lockable bezel, reducing setup and ramp‑up time.
- Available in various measuring ranges to match standard workshop and production requirements.
Metav — a precision partner you can rely on
Metav stands for democratisation of precision, combining decades of technical expertise with a broad, dependable supply chain from Emmerich. With over 48,000 customers and a catalogue that spans more than 250,000 products, Metav supplies dial calipers and complementary measuring equipment as a pragmatic, quality‑focused partner for industry and trade.
In short: dial calipers for reliable inspections
Dial calipers provide a straightforward, mechanically robust solution for fast, repeatable analogue measurement on the production line, supporting consistent quality control and reduced measurement uncertainty.
FAQ
What makes dial calipers more error‑resistant than standard vernier calipers?
Dial calipers show the millimetre fraction on an integrated dial, so there is no need for manual interpolation of the scale; this direct readout reduces human reading errors and speeds up successive measurements.
Can dial calipers withstand daily workshop use?
Yes. Dial calipers are designed with a shock‑protected mechanism and hardened stainless steel construction to maintain accuracy and resist wear in routine industrial environments.
How is zeroing and result locking handled on these calipers?
Zeroing is performed using the lockable bezel, and measured values can be fixed with the locking screw, ensuring secure transfer of results and repeatable checks.
Are dial calipers available for different measurement tasks?
Dial calipers are offered in various measuring ranges to suit bench, toolroom and production inspection tasks, providing flexibility across multiple workflows.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com