High-precision drills for reliable, high-throughput metalworking
Drills provide the fundamental rotating cutting solution for producing accurate cylindrical holes in materials such as structural steel, high-alloy stainless steel, cast iron, non-ferrous metals and engineering plastics, delivering consistent hole quality and extended tool life in CNC machining and turning centres. This category covers everything from classic twist drill made from high-speed steel for general machining to solid carbide drill optimised for high cutting speeds and long run times, offering advanced coatings and internal coolant options for improved heat management. By using optimised point geometries and split points the tools reduce thrust, prevent walking at the start of the cut and ensure superior surface finish, which benefits sectors from general mechanical engineering to automotive component manufacture.
12.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short Type N, Diameter 12.7 mm, 135° Tip, Bright Finished, Short Execution, DIN 338, HSS‑G (MetavCUT) The Twist Drill short Type N is a precision metalworking bit designed for Drilling Machines, combining a short design with a 135° point angle for reliable performance in hard materials. Short design for increased stability HSS‑G ground for precise, clean holes 135° tip for harder materials and steel Fully ground shank for excellent concentricity Conforms to DIN 338 for short Twist Drills Faster, more efficient drilling in demanding metalwork The HSS‑G ground geometry of this short Twist Drill enables up to 40% faster drilling while requiring about 50% less feed force compared with conventional HSS bits. This translates into lower spindle load and shorter cycle times when working with alloyed and unalloyed Steel. The combination of short spiral length and reduced overhang increases Stability, reducing chatter and improving hole quality for precision assemblies. Built to cut hard materials with consistent accuracy A 135° Point Angle is specified to ease entry into tougher substrates such as Stainless Steel or tempered components, reducing the tendency to work‑harden at the hole edge. The Type N normal helix is optimised for metal cutting, making the bit suitable for Cast Steel, Gusseisen, Sintered Iron, non‑ferrous metals and hard plastics. The short overall length reduces deflection so that each drilled hole maintains concentricity and dimensional accuracy. Manufacturing quality: ground geometry and bright finish Being a short, fully ground Twist Drill manufactured in accordance with DIN 338, the flute geometry is produced by CNC grinding rather than rolling. This results in very sharp cutting edges and high runout accuracy, producing clean, burr‑reduced holes. The bright finished surface aids chip evacuation and visual inspection, while the fully ground shank supports excellent clamping and minimal runout in chucks and collets. Recommended applications and handling advice for best results This short Twist Drill from MetavCUT is intended primarily for use in stationary or portable Drilling Machines where rigidity and precision are required. For best life and hole quality, use appropriate cutting fluid and moderate speeds adapted to material. The shorter form is ideal for tight setups and for operations where deflection must be minimised. If unsure whether this Twist Drill meets specific project requirements, METAV Werkzeuge offers comprehensive technical advice and assistance. Strong recommendation: choose the MetavCUT short Twist Drill Type N for precision metalworking and contact METAV Werkzeuge for expert support — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271 Technical Specifications Bezeichnung: Twist Drill Marke: MetavCUT Bezeichnung/Type: Type N Durchmesser: 12.7 mm Spitzenwinkel: 135° Ausführung: short Farbe: bright finished Material: HSS‑G Schaft Ausführung: fully ground Spirallänge: 101 mm Gesamtlänge: 151 mm Anwendung: Drills for metal Für Bohrmaschine: Drilling Machine Modellserie: Standard Line Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? The MetavCUT Twist Drill is used mainly for machining high‑strength materials and larger hole diameters; its design allows relatively simple regrinding and it withstands high loads, making it suitable for demanding metalworking tasks. Which three drill types are there? Commonly distinguished drill types are Metal Drill, Wood Drill and Masonry/Concrete Drill; the MetavCUT Twist Drill belongs to the Metal Drill category and is optimised for metalworking applications.
12.8mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short, Ø 12.8 mm, 118° tip, black, HSS, DIN 338 The Twist Drill Type N short is a compact HSS metal-drilling bit designed for precise work with Hand Drills and Drilling Machines. Short design for increased stability HSS material for reliable metalworking 118° tip for accurate centring Conforms to DIN 338 standard Black finish for reduced glare Durable HSS construction for dependable metalworking The short HSS construction gives the bit high Dauerhaftigkeit and consistent cutting performance when machining metals. Made from HSS (High Speed Steel), this design tolerates heat and maintains edge integrity during repeated use. The solid material choice reduces wear and enables straightforward resharpening, so tasks in workshops or maintenance settings require fewer tool changes and deliver predictable results. Short length and precise geometry reduce deflection A shorter overall length limits bending and improves concentricity during rotation, which enhances hole accuracy in demanding jobs. The 118° tip angle supports reliable centring on many workpiece surfaces, while the Type N spiral geometry is the classic configuration for metal drilling. Together these features produce clean entry and uniform chip evacuation, helping to avoid runout and improving hole quality in thicker or tougher components. Suited applications and machine compatibility Engineered for metalworking, this bit fits both stationary and portable drills; specified for use in a Drilling Machine or Hand Drill depending on the task. It is appropriate for alloyed and unalloyed steels, cast iron, non‑ferrous metals and many plastics, making it a flexible choice for fabrication, repair and maintenance. The short design is particularly useful where access is limited or where rigidity takes priority over reach. Who benefits from this compact Twist Drill Professional workshops, maintenance teams and skilled hobbyists will value the balance of precision and robustness. The compact format reduces chatter and improves operator control in repeated production runs. For projects that demand repeatable hole quality and straightforward reconditioning, this Twist Drill from MetavCUT provides a pragmatic combination of stability and serviceability. MetavCUT recommends this Twist Drill Type N short for precision metal drilling; for tailored technical advice or application support contact METAV Werkzeuge — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 40128-FDA Diameter: 12.8 mm Tip angle: 118° Execution: short Spiral length: 101 mm Overall length: 151 mm Material: HSS (High Speed Steel) Type: Type N Colour: black For: Drilling Machine / Hand Drill Standard: DIN 338 Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill from MetavCUT Type N used for? The MetavCUT Twist Drill Type N is primarily used for machining high-strength materials and larger drill diameters, offering a shape that is easy to sharpen and capable of withstanding significant loads. Which three drill types exist? The common distinction identifies metal drills, wood drills, and stone/concrete drills, covering the typical material groups encountered in workshop and construction environments. Why are twist drills pointed? The point reduces the cross‑cutting edge at the tip of the Twist Drill, lowering friction forces so less feed force is required while improving the bit’s ability to self‑centre in the workpiece. Can a Twist Drill be used to drill wood? A metal Twist Drill such as the MetavCUT Type N can be used in wood, but it provides less guidance and a rougher finish compared with dedicated wood bits; it is easier to resharpen and has a lower tendency for aggressive self‑feeding. At which drilling depths is the Twist Drill most commonly used? A solid twist drilling operation is commonly executed with Twist Drills for diameters up to about 20 mm and drilling depths up to 100 mm, making them the most frequent choice for through‑hole work. What is better, HSS or HSSE? The general belief that HSSE steels are always superior to HSS is incorrect; the decision should be based on specific working conditions and whether those justify the higher initial cost of HSSE.
12.8mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Kombination aus HSS‑E mit 5% Kobaltlegierung, Kurzausführung und geschliffenem Zylinderschaft sorgt für hohe Stabilität und präzise Bohrbilder. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT – HSS‑E Kurzbohrer 12,8 mm Der Spiralbohrer ist ein kurzer HSS‑E Metallbohrer für präzise Bohrungen in legiertem und unlegiertem Stahl sowie Nichteisenmetallen HSS‑E mit 5% Kobaltlegierung Kurzausführung für hohe Stabilität Geschliffener Zylinderschaft für präzise Bohrung 135° Spitzenwinkel für harte Werkstoffe Normkonform nach DIN 338 Mehr Stabilität bei präziser Bohrführung Die Kurzausführung reduziert die Auskraglänge und damit Vibrationen sowie Verbiege‑Tendenzen beim Bohren. Durch die Kombination aus HSS‑E und einer 5% Kobaltlegierung erhöht sich die Wärme‑ und Verschleißfestigkeit gegenüber einfachem HSS, sodass saubere Bohrbilder auch bei anspruchsvollen Materialien erhalten bleiben. Der geschliffene Zylinderschaft trägt zusätzlich zur Rundlaufgenauigkeit bei, was besonders bei sichtbaren oder passungsrelevanten Bohrungen von Vorteil ist. Geeignet für den Alltagseinsatz in Werkstatt und Montage Mit einem Durchmesser von 12,8 mm liegt dieser Bohrer im Standard‑Bereich und ist damit gut geeignet für Handgeführte Maschinen wie die Handbohrmaschine sowie für stationäre Säulenbohrmaschinen bei normalen Gewerbe‑ und Werkstattaufgaben. Typische Einsatzfelder sind dünne bis mittlere Bleche, Profile und allgemeine Metallbearbeitung. Für sehr tiefe Löcher (über das Fünffache des Durchmessers) oder gehärtete Serienfertigung sind spezialisierte Werkzeuge zu bevorzugen. Geometrie, Norm und Werkstoff richtig eingesetzt Der Spitzenwinkel 135° sorgt für kontrollierten Anbohrdruck und bessere Zerspanung in harten Werkstoffen wie Edelstahl. Die Ausführung geschliffen (HSS‑G) liefert schärfere Schneiden und höhere Rundlaufgenauigkeit, erfordert jedoch eine angepasste Kühlung und stationäre Werkzeuge bei sehr anspruchsvollen Anwendungen. Die Einordnung nach DIN 338 bestätigt die Klassifizierung als kurzer Spiralbohrer mit Zylinderschaft und macht die technischen Anforderungen transparent. Empfehlung: Den MetavCUT HSS‑E Kurz‑Spiralbohrer für präzise Metallbearbeitung über Metav beziehen; bei Fragen: info@metav-werkzeuge.com oder +49 2822 7131930 Produktmerkmale Artikelnummer: 47128-FDA Marke: MetavCUT Serie: Standard Line Norm: DIN 338 Daten Durchmesser: 12,8 mm Gesamtlänge: 151 mm Spirallänge: 101 mm Spitzenwinkel: 135° Besonderheiten Material: HSS‑E (Schnellarbeitsstahl mit Kobaltanteil) Farbe: 5% kobaltlegiert Schaftausführung: geschliffen Ausführung: kurz Typ: Typ N (Normalspirale) Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 5 FAQ Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet? Der Spiralbohrer von MetavCUT (HSS‑E Kurzbohrer, SKU 47128‑FDA) mit 135° Spitzenwinkel und 5% Kobaltlegierung eignet sich gut für das Bohren in Härteren Stählen und Edelstahl, sofern mit geeigneter Kühlschmierstoffzufuhr gearbeitet wird. Kann ich den Bohrer in einer Handbohrmaschine verwenden? Ja, der Spiralbohrer ist für den Einsatz in Handbohrmaschinen vorgesehen; bei Durchmesser 12,8 mm empfiehlt sich jedoch eine stabile Spannaufnahme und moderater Vorschub, um Rundlauf und Schnittleistung zu gewährleisten. Warum ist der Schaft geschliffen und was bringt das? Die geschliffene Schaftausführung sorgt für hohe Rundlaufgenauigkeit und schärfere Schneiden, wodurch der MetavCUT HSS‑E Spiralbohrer präzisere Bohrlöcher liefert; dies macht ihn besonders geeignet für Sicht‑ und Passungsbohrungen. Wie verhält sich der Kurzbohrer bei Serienprodukten? Der kurze Spiralbohrer (DIN 338) bietet erhöhte Stabilität, ist aber bei sehr großen Serien in gehärtetem Stahl nicht die wirtschaftlichste Wahl; für Dauerbetrieb in hartem Material sind Vollhartmetallwerkzeuge oft wirtschaftlicher. Welche Vorteile bietet die 5% Kobaltlegierung? Die 5% Kobaltlegierung im HSS‑E des MetavCUT Spiralbohrers steigert Hitzebeständigkeit und Verschleißfestigkeit, wodurch längere Standzeiten und sichere Bohrvorgänge in legierten Stählen erreicht werden.
12.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Kombination aus geschliffener HSS-G-Geometrie und kurzer Ausführung sorgt für präzise, saubere Bohrungen in legierten und unlegierten Stählen; die DIN-338-Konformität sichert reproduzierbare Ergebnisse. Nutzen Sie die höhere Stabilität und den 135° Spitzenwinkel für anspruchsvolle Metallarbeiten. Bestellen Sie den Spiralbohrer direkt über Metav oder ziehen Sie bei Bedarf unsere technische Beratung hinzu. Spiralbohrer 12,8 mm von MetavCUT Spiralbohrer 12,8 mm kurz für präzise Metallbearbeitung, geschliffen nach DIN 338 für Handbohrmaschine und stationäre Maschinen HSS-G geschliffen für saubere Bohrungen Kurze Ausführung für erhöhte Stabilität 135° Spitzenwinkel für harte Werkstoffe DIN 338 konform, Zylinderschaft Typ N Geeignet für Handbohrmaschine und Stationär Hohe Schnittleistung durch Materialwahl und Geometrie Dank HSS-G (Schnellarbeitsstahl, geschliffen) erreicht dieser Spiralbohrer spürbar schnellere Bohrfortschritte in Stahl und Gusswerkstoffen. Die geschliffene Schliffgeometrie sorgt für scharfe Schneiden und hohe Rundlaufgenauigkeit, wodurch weniger Nacharbeiten und saubere Bohrlochkanten entstehen. Für Anwender bedeutet das: weniger Kraftaufwand, schnellere Taktzeiten und konstante Bohrqualität bei legierten und unlegierten Stählen. Stabilität und Präzision durch kurze Ausführung Die kurze Ausführung reduziert die Auskraglänge und minimiert Vibrationen, was die Standzeit und Präzision erhöht. Bei Bohrungen in harten Werkstoffen ermöglicht der 135° Spitzenwinkel ein kontrolliertes Eindringen und reduziert das Ausbrechen an der Austrittskante. Diese Bauform ist ideal für Anwendungen, in denen Maßhaltigkeit und Oberflächenqualität entscheidend sind, zum Beispiel in der Maschineninstandsetzung oder im allgemeinen Maschinenbau. Einsatzprofile und Maschinenkompatibilität Der Spiralbohrer ist für den Standard-Bereich (Durchmesser 2,0–13,0 mm) optimiert und eignet sich somit für handgeführte Akkubohrschrauber ebenso wie für stationäre Bohrmaschinen. Bei flächennahen, schnellen Bohrungen in Baustahl, Aluminium und diversen Nichteisenmetallen liefert der Bohrer saubere Ergebnisse. Für besonders exakte Passungen empfiehlt sich vorheriges Anpunkten mit einem Zentrierbohrer, um ein Wandern zu vermeiden. Spezielle Merkmale, Handhabung und Hinweise Die DIN-338-Norm garantiert die Klassifikation als kurzer Spiralbohrer mit Zylinderschaft; die geschliffene Ausführung (HSS-G) bietet hohe Schnittgüte, kann jedoch bei unsachgemäßer Handhabung spröder reagieren als gewalzte Alternativen. Kühlung und moderater Vorschub verlängern die Lebensdauer. Für tiefe oder wiederholte Bohrungen in zähen Werkstoffen empfiehlt sich schrittweises Aufbohren und ständige Kühlmittelzufuhr. Empfehlung: Den MetavCUT Spiralbohrer 12,8 mm aus der Standard Line für präzise Metallbearbeitung direkt über Metav beziehen; bei technischen Fragen steht die Beratung unter info@metav-werkzeuge.com oder +49 2822 7131930 zur Verfügung. Produktmerkmale Artikelnummer: 45128-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Material: HSS-G Norm: DIN 338 Typ: Typ N Ausführung: kurz Schaftausführung: geschliffen Spiralänge: 101 mm Gesamtlänge: 151 mm Durchmesser: 12,8 mm Farbe: blank Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 5 Daten Durchmesser: 12,8 mm Spiralänge: 101 mm Gesamtlänge: 151 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) Schaftausführung: geschliffen (hohe Rundlaufgenauigkeit) Typ: Typ N (Normalspirale, für Metall geeignet) Hersteller: MetavCUT Geeignet für: Handbohrmaschine und Stationär FAQ Welche Werkstoffe lassen sich mit dem Spiralbohrer 12,8 mm bearbeiten? Der Spiralbohrer 12,8 mm von MetavCUT (Standard Line, SKU 45128-FDA) eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff. Ist der Spiralbohrer für Handgeführte Maschinen geeignet? Ja, die kurze Ausführung und die Einordnung in den Standard-Bereich machen den MetavCUT Spiralbohrer 12,8 mm geeignet für Handbohrmaschine sowie für stationäre Bohrmaschinen. Welche Vorteile bietet die geschliffene Schaftausführung? Die geschliffene Schaftausführung des HSS-G Spiralbohrers sorgt für hohe Rundlaufgenauigkeit und scharfe Kanten, was zu saubereren Bohrlöchern und besserer Maßhaltigkeit führt. Wann ist der 135° Spitzenwinkel vorteilhaft? Der 135° Spitzenwinkel des MetavCUT Spiralbohrers verkürzt die Anbohrzeit in härteren Werkstoffen und reduziert das Ausbrechen an der Austrittskante, besonders bei Edelstahl und gehärteten Stählen. Wie viele Bohrer sind in der Verpackungseinheit enthalten? Die Verpackungseinheit umfasst 5 Stück des Spiralbohrers 12,8 mm (MetavCUT, Standard Line, SKU 45128-FDA).
12.9mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Der kurze HSS-Bohrer überzeugt durch hohe Stabilität, präzise Zentrierung und die Normkonforme Auslegung nach DIN 338; Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT — kurzer HSS-Bohrer für Metall Der Spiralbohrer ist ein kurzer HSS-Bohrer mit Zylinderschaft, der für präzise Metallbohrungen an Handbohrmaschinen und stationären Geräten konzipiert wurde. Kurze Ausführung für hohe Stabilität HSS-Material reduziert Bruchrisiko bei kleinen Durchmessern Geeignet für legierten und unlegierten Stahl Zylinderschaft, kompatibel mit Handbohrmaschinen Spitzenwinkel 118° für einfache Zentrierung Präzision und Stabilität für Metallbearbeitung Der kurze Spiralbohrer liefert eine spürbare Verbesserung bei der Stabilität gegenüber längeren Ausführungen. Durch die reduzierte Auskraglänge verringert sich das Risiko von Durchbiegung und Wandern, was insbesondere bei Bohrungen in Stahl und Gusseisen wichtig ist. Die Bauart nach DIN 338 sorgt dafür, dass der Bohrer die erwarteten Toleranzen und Passformen erreicht. Anwender profitieren von einer gleichmäßigeren Bohrbildung und besserer Maßtreue, was Nacharbeit reduziert und die Prozesssicherheit in der Werkstatt erhöht. Materialeigenschaften und Anwendungsempfehlung Das verwendete HSS macht den Bohrer elastisch und reduziert das Bruchrisiko, besonders bei kleinen Bohrdurchmessern. Als Typ N mit Normalspirale ist der Bohrer speziell für die Metallbearbeitung ausgelegt; weichere Werkstoffe wie Aluminium lassen sich dennoch sauber bearbeiten, während Edelstahl mit entsprechend angepasstem Vorschub besser gehandhabt wird. Weil der Bohrer für Hand- und stationäre Maschinen geeignet ist, empfiehlt sich bei hoher Präzision vorab das Anpinken mit einem Zentrierbohrer. Diese Vorgehensweise verlängert die Standzeit und sorgt für saubere Anbohrungen. Einsatzbereich, Zielgruppe und Verarbeitungstipps Dieses Werkzeug richtet sich an Profiwerkstätten, Instandhaltung und ambitionierte Heimwerker, die in Metall, Profilen oder Bauteilen saubere Bohrungen benötigen. Der kurze Aufbau ist ideal bei beengten Arbeitsverhältnissen und für Anwendungen, bei denen Stabilität über Auskraglänge entscheidet. Zur optimalen Anwendung gehören passende Kühlschmierstoffe und moderater Vorschub, um Überhitzung zu vermeiden. Für größere Durchmesser oder tiefe Sacklochbohrungen empfiehlt sich hingegen eine abgestufte Vorgehensweise mit Vorbohrungen. Empfehlen Sie das HSS-Bohrwerkzeug von MetavCUT für sichere Metallbohrungen; Bestellanfragen und technische Rückfragen gerne per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 40129-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Typ: Typ N Norm: DIN 338 Fakten Durchmesser: 12,9 mm Gesamtlänge: 151 mm Spirallänge: 101 mm Spitzenwinkel: 118° Verpackungseinheit: 5 Besonderheiten Material: HSS (Schnellarbeitsstahl) Ausführung: kurz Farbe: schwarz Für Bohrmaschine: Handbohrmaschine SKU: 40129-FDA Anwendung: Bohrer für Metall DIN 338: Norm für kurze Spiralbohrer HSS: Schnellarbeitsstahl, hohe Elastizität FAQ Für welche Werkstoffe eignet sich der Bohrer am besten? Der Spiralbohrer von MetavCUT (Spiralbohrer, SKU 40129-FDA) eignet sich primär für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle und Kunststoffe; bei harten Werkstoffen ist auf passende Kühlung und abgestimmten Vorschub zu achten. Ist der Bohrer für Handbohrmaschinen geeignet? Ja, die kurze Ausführung und der Zylinderschaft machen den HSS-Bohrer von MetavCUT ideal für Handbohrmaschinen und mobile Einsätze, da die reduzierte Auskraglänge die Stabilität erhöht und das Wandern minimiert. Wie wirkt sich der Spitzenwinkel von 118° aus? Der Spitzenwinkel von 118° ermöglicht eine gute Zentrierung und ein leichtes Eindringen in Werkstücke; er ist besonders vorteilhaft bei weicheren Metallen und erleichtert das Anbohren ohne übermäßige Randverformung. Welche Vorteile bringt die Norm DIN 338 bei diesem Bohrer? Die Auslegung nach DIN 338 stellt sicher, dass der kurze Spiralbohrer einheitliche Abmessungen und Kompatibilität mit gängigen Spannsystemen bietet; das erhöht Austauschbarkeit und Produktionssicherheit. Wie sollte man den Bohrer einsetzen, um die Standzeit zu maximieren? Empfohlen werden moderate Schnittgeschwindigkeiten, passendes Kühlschmiermittel und bei Bedarf ein Anpicken mit einem Zentrierbohrer; diese Maßnahmen reduzieren Wärmeentwicklung und verbessern die Standzeit des HSS-Werkzeugs. Ist der Bohrer für tiefe Bohrungen geeignet? Für sehr tiefe Löcher ist die kurze Ausführung weniger optimal; bei tieferen Anwendungen sollten gestufte Vorbohrungen oder längere Spiralbohrer eingesetzt werden, um eine sichere Spanabfuhr zu gewährleisten.
12.9mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Short Type N Drill, 12.9 mm, 135° Tip, HSS‑E, 5% cobalt‑alloyed, Fully Ground, DIN 338, MetavCUT A short Twist Drill (Type N) designed for precise metal drilling with Drilling Machines and professional workshop use. Short design for increased stability and precision 12.9 mm Diameter for medium‑sized metal bores 135° Tip for harder materials and reduced wander Made of HSS‑E with 5% cobalt for higher wear resistance Fully Ground geometry for accurate, clean holes Precision and Stability that improve every hole A short Twist Drill offers a clear advantage where Rigidity and Exactness matter. The reduced overhang minimizes bending and vibration, so the Drill stays on center even under higher feed forces. For users who rely on repeatable hole quality, this translate into fewer rejects and less rework. The shorter Overall Length also permits safer use in tight set‑ups and stationary Drilling Machines, delivering consistently round bores with improved surface finish. Material and Geometry for demanding metalworking The combination of HSS‑E material and a 5% cobalt‑alloyed composition increases heat resistance and toughness, which is especially beneficial when working with alloyed or stainless steels. A 135° Tip reduces thrust and avoids excessive chipping at the entry, so penetration is smoother in harder materials. For those less familiar: HSS‑E means High Speed Steel with enhanced Cobalt content, providing a balance of hardness and elasticity that reduces the risk of premature wear in heavy duty metal drilling. Built for professional applications and reliable results This Type N short Drill is intended primarily for Metalworking operations where a stable, conventional spiral is required. Shops, toolrooms and maintenance teams will value the improved centering and lower vibration during common tasks such as through‑holes and precise locating bores. Because the Drill is suitable for use in Drilling Machines, it supports both stationary and mobile production needs while maintaining a manufacturing‑oriented performance profile. DIN 338 and Fully Ground: why the standards matter Compliance with DIN 338 denotes that the Drill follows established dimensions and tolerances for short twist drills with cylindrical shanks. The Fully Ground (geschliffen) flute geometry produces very sharp cutting edges and high runout accuracy, resulting in cleaner holes in metal; compared to roll‑formed variants, ground drills usually give better hole quality though they require careful handling and adequate cooling to avoid brittleness. This specification helps users choose the right tool for demanding metal tasks. MetavCUT recommends the Twist Drill Type N for precision metal drilling — for tailored technical advice or to confirm fit for your application contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 Bezeichnung: Twist Drill Marke: MetavCUT SKU: 47129‑FDA Diameter: 12.9 mm Tip Angle: 135° Type: Type N Execution: Short Colour: 5% cobalt‑alloyed Material: HSS‑E Shank Execution: Fully Ground Spiral Length: 101 mm Overall Length: 151 mm For Machine: Drilling Machine Application: Drills for metal Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for? The MetavCUT Twist Drill Type N is mainly applied to machining high‑strength materials and larger bore diameters; its short design and robust geometry suit precise metalworking tasks and reduce the risk of breakage under heavier loads. Which three drill types are there? Drill types are commonly categorized as Metal drill, Wood drill and Stone/Concrete drill; the MetavCUT Twist Drill belongs to the Metal drill group and is optimised for ferrous and non‑ferrous metals.
12.9mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N short HSS-G drill bit, Ø 12.9 mm, 135° tip, bright finished The Twist Drill Type N short variant for Drilling Machines designed for precise metalworking and hard materials such as steel Short Design improves Stability and Precision 135° Tip Angle suited for Harder Materials HSS-G Material for Clean, Accurate Metal Holes Fully Ground Shank for High Roundness and Grip Conforms to DIN 338 for Short Twist Drills Precise Material and Cutting Performance for Demanding Metalwork The short Twist Drill in HSS-G offers a clear advantage when machining metals: the short overall length reduces cantilever action and thus vibration, delivering a truer hole and longer tool life under appropriate conditions. Manufactured with a CNC grind on the flutes, this variant produces very sharp cutting edges and excellent radial runout. For operators working on alloyed and unalloyed steels, cast steel, cast iron and non-ferrous metals, the geometry and 135° tip angle shorten the initial centering phase and reduce burr formation when used with suitable coolant. Stability and Faster Drilling with Lower Thrust Short design yields measurable process benefits: reduced deflection allows higher feed rates and better surface finish with less risk of tool breakage during stationary or mobile machine operation. The fully ground shank improves concentricity in the chuck and enhances torque transmission. In many workshop applications this results in up to 40% faster drilling and noticeably lower required thrust compared with conventional HSS variants, making the tool particularly suitable for demanding, repetitive metal drilling tasks where consistency matters. Where this Tool Excels and How to Use It Engineered under DIN 338, this Type N short Twist Drill is optimized for drilling in tougher materials and for situations requiring precision rather than deep-hole capability. When used with appropriate clamping, correct spindle speed and cutting fluid, the bit delivers clean, cylindrical holes and extended edge life. The short flute length also simplifies tool handling and reduces the tendency to chatter, which benefits both manual Drilling Machines and light machining centres. Cooling is recommended for prolonged operations to avoid thermal softening. Recommended Users and Typical Applications Workshop professionals, maintenance technicians and precision fabricators benefit most from this short Twist Drill from MetavCUT, Standard Line. Its characteristics make it a reliable choice for production runs involving steel, cast materials and hard plastics, where repeatable accuracy and surface quality are priorities. The balanced combination of geometry and material allows use in both stationary and portable Drilling Machines provided adequate support and coolant are available. Strongly recommended: choose the MetavCUT Twist Drill Type N short HSS-G for demanding metal drilling tasks — for personalised technical advice and application support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930; WhatsApp: +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 45129-FDA Type: Type N Diameter: 12.9 mm Tip Angle: 135° Material: HSS-G (ground) Execution: short Spiral Length: 101 mm Overall Length: 151 mm Shank Execution: fully ground Colour: bright finished For Drilling Machine: Drilling Machine Model Series: Standard Line Norm: DIN 338 Application: Drills for Metal Packaging Unit: 5 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best application for the Twist Drill Type N from MetavCUT? The MetavCUT Twist Drill Type N short is primarily intended for drilling Metal, especially suited to high-strength and harder materials; its short design improves Stability and Precision when used in stationary or portable Drilling Machines. For what is a Twist Drill used? A Twist Drill is mainly applied to the machining of high-strength materials and larger hole diameters; it is easy to regrind and withstands higher loads while providing stable performance. Which three drill types exist? The main categories are Metal Drills, Wood Drills and Stone/Concrete Drills, covering the typical material groups for most workshop applications.
120mm Centre Drill DIN 333 Form A 60° Countersink Angle HSS-Co Extra Long Right-Hand - TECWERK
Take advantage of the combination of a cobalt-alloy HSS grade, an overlong design and DIN 333 conformity to produce reliable centre holes in deep or hard-to-reach workpieces; order directly via Metav Werkzeuge or consult our specialists for machining recommendations. TECWERK Centre Drill DIN 333 Form A – 3.15 mm, HSS‑Co, overlong A TECWERK centre drill DIN 333 Form A, 3.15 mm designed for precise centre-hole preparation in metalworking, especially where extended reach and conformity to DIN 332 are required HSS‑Co construction for increased wear resistance DIN 333 Form A, 60° centre angle Overlong design for deep access 10 mm shank, right‑hand cutting Precise centre-hole preparation for reliable machining starts The TECWERK centre drill is engineered to ensure accurate seating for subsequent drilling and turning operations. Built to the DIN 333 specification and intended for producing centre holes as defined by DIN 332, this tool establishes the correct geometry for live- or dead-centre support. The 60° centre angle provides the standard contact form for centre support and reduces runout during subsequent operations, which helps to protect both workpiece and machine and supports consistent concentricity. Material and geometry for extended tool life Made from HSS‑Co (cobalt-alloy high-speed steel), the tool offers enhanced hot-hardness and abrasion resistance compared with standard HSS. The combination of the alloyed steel and the centre-drill geometry improves performance when preparing holes in general steel and other common workshop metals. The right‑hand cutting orientation and the specified feed guidance of 0.03 mm/rev (for steel up to 800 N) enable controlled chip formation and steady penetration, promoting longer tool life and predictable results. Overlong design for deep or awkward setups The overlength configuration gives access to deeper or recessed work zones where a standard-length centre drill would be impractical. With an overall length of 120 mm and a 10 mm shank, the tool can be used with extended toolholders or in fixtures that require additional reach, while maintaining sufficient rigidity for precise centring tasks. The design omits a protective countersink, catering to workflows that require a direct centre-drilling operation without an additional protective feature. Practical machining data and workshop benefits Key numeric specifications such as a 3.15 mm nominal diameter and the 60° countersink angle make tool selection straightforward for standard centre requirements. The tool’s feed recommendation and material composition translate into operational advantages: more predictable hole quality, reduced rework, and stable setup for subsequent drilling or turning. The 10 mm cylindrical shank simplifies mounting to common collets and chucks, allowing rapid tool changes in a production or jobbing environment. For high-reach centre drilling tasks, rely on the robustness of TECWERK’s HSS‑Co centre drill and contact Metav Werkzeuge for purchasing or to discuss suitable holders and feed strategies — Metav Werkzeuge is available from Emmerich to advise on optimal application. Technical data Article number: 2000861980NW Product type: Centre drill Brand: TECWERK Material: HSS‑Co Standard: DIN 333 Core specifications Diameter: 3.15 mm Overall length: 120 mm Shank diameter: 10 mm Countersink angle: 60° Cutting direction: right‑hand Feed in steel up to 800 N: 0.03 mm/rev Packaging unit: 1 Design and applications Form: A Design: overlong execution Countersink: without protective countersink Intended use: manufacture of centre holes according to DIN 332 Typical application: centre-hole preparation prior to drilling or turning FAQ What materials is this centre drill suitable for? The TECWERK centre drill in HSS‑Co is suited for general workshop metals; the HSS‑Co grade improves performance when machining steels and other common alloys. How does the overlong design affect rigidity and application? The extended 120 mm overall length provides reach into recessed areas while the 10 mm shank allows secure clamping; appropriate toolholders should be used to maintain rigidity for the intended application. Is the tool compliant with industry standards? Yes, the centre drill is manufactured to DIN 333 and intended to produce centre holes in accordance with DIN 332 specifications. What feed should be used when centre drilling steel? The specified guidance for steel up to 800 N is 0.03 mm per revolution, which helps ensure controlled cutting and consistent hole formation with this TECWERK centre drill. Does this centre drill include a protective countersink? No, this overlong execution is supplied without a protective countersink, for use in processes that require direct centre-hole formation. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
125mm Precision Centre Drill DIN 333 Form A 12.5mm HSS 60° Right-Hand - TECWERK
Take advantage of the combination of HSS construction, DIN 333 Form A conformity and a precise 60° tip to ensure consistent centre-hole quality and reliable performance in general workshop use; order directly via Metav Werkzeuge or consult the team for application advice. TECWERK centre drill DIN 333 Form A, 12.5 mm HSS — 60° tip A TECWERK centre drill designed for producing precise centre holes to DIN standards in general workshop and industrial applications. HSS construction for high wear resistance Conforms to DIN 333 Form A for standard centring 60° tip for accurate centre-hole geometry Suitable for general workshop use Dependable centring performance for repeatable results Manufactured from HSS, this centre drill delivers robust cutting behaviour under continuous use. Conformity with DIN 333 ensures that the tool creates standardised centre holes suitable for subsequent drilling or turning operations, which reduces setup time and rejects. The 60° tip provides a defined geometry that centres workpieces reliably on lathes and drilling machines, improving concentricity and minimising workpiece runout. Such consistency supports efficient production and predictable downstream machining. Clear material guidance and cutting data for planning The tool is specified for a 12.5 mm nominal diameter and offers a practical feed recommendation of 0.11 mm/rev in steel up to 800 N tensile strength, which balances tool life and hole quality. Explaining the figure: 0.11 mm/rev is the suggested axial advance per spindle revolution when machining typical steels in the stated strength class. Selecting this feed helps avoid premature blunting while maintaining a clean centre mark for accurate follow-up operations, giving planners and operators a concrete baseline for process setup. Practical design that fits everyday workshop workflows With an overall length of 125 mm and Form A geometry, the centre drill is engineered for general-purpose centring without protective countersinking, in line with the relevant DIN guidance. The right-hand cutting direction supports conventional spindle rotation and simplifies tool orientation in common holders. A straightforward specification reduces ambiguity during procurement and tool selection, enabling faster stock decisions and smoother integration into existing tool inventories. Reliable supply and reduced procurement risk Sourcing through an experienced partner ensures availability and consistent quality control. Metav Werkzeuge applies a quality filter at its Emmerich facility and stocks a broad range of precision tools, reducing the number of suppliers required and providing traceable consistency across orders. The combination of standardised geometry, clear cutting data and a dependable channel supports production stability and lowers the risk of mismatched tools affecting machining outcomes. Discuss the TECWERK centre drill and application requirements with Metav Werkzeuge — our Emmerich team can confirm suitability, advise on feeds and delivery from stock Technical Data Article number: 2111651925NW Product type: Centre drill Brand: TECWERK Facts Nominal diameter: 12.5 mm Overall length: 125 mm Countersink angle: 60° Feed in steel (to 800 N): 0.11 mm/rev Standard: DIN 333 Form: A Cutting direction: right-hand Special features Material: HSS For producing centre holes to DIN 332 without protective countersinking Intended use: general workshop use Packaging unit: 1 FAQ What materials is this centre drill suitable for? The TECWERK centre drill (centre drill, SKU 2111651925NW) is made from HSS and is specified for general workshop use; the published feed guidance applies to steel up to 800 N tensile strength. What feed should be used for reliable results? Use a feed of 0.11 mm/rev in steels up to 800 N as recommended for the TECWERK centre drill to balance hole quality and tool life. Does this tool produce a countersink as well as a centre hole? This centre drill is intended for producing centre holes to DIN 332 without protective countersinking; it provides the defined centre mark required for subsequent machining rather than a finished countersink. What are the key dimensions of the tool? The tool has a 12.5 mm nominal diameter and an overall length of 125 mm, consistent with its Form A geometry for standard centring tasks. Which way does the flute/cutting action operate and what is the material? The TECWERK centre drill features right-hand cutting action and is manufactured from HSS, offering good wear resistance for routine centring operations. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
12mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS 12 mm, 118° (DIN 338) A Twist Drill Type N short for Drilling Machine applications, designed for precise metal drilling and stable performance Type N design for reliable metal drilling 12 mm Diameter for medium-sized holes 118° Tip for improved centring and control Short HSS construction for greater rigidity Conforms to DIN 338 for standardised quality Greater Precision and Less Deflection for Metalworking The short Twist Drill in Type N geometry offers a compact working length that directly increases stability during machining. Because the exposed length is reduced compared with longer bits, bending and chatter are minimised, resulting in more accurate hole positions and cleaner surfaces in steel and similar materials. This design is particularly beneficial when using portable or stationary Drilling Machines where rigidity and repeatable accuracy matter. Durable HSS Material and Practical Tip Geometry Manufactured from HSS (High Speed Steel), this Twist Drill combines toughness and heat resistance suitable for alloyed and unalloyed steels, cast iron, non-ferrous metals and plastics. The 118° tip angle favours easier penetration and superior centring on softer to medium-hard materials, while keeping cutting forces moderate. For users unfamiliar with terminology: HSS means a steel grade made for high-speed cutting; it preserves hardness at elevated temperatures and allows economical resharpening when required. Conformity to DIN 338 and Application Advantages Built to DIN 338 for short twist drills with cylindrical shank, this bit follows defined dimensions and manufacturing practices that support interchangeability and expected performance. The short execution reduces overhang, making the bit ideal for precision jobs on metal components. Use this Twist Drill for typical metal-drilling tasks where repeatable hole quality and tool life under standard workshop conditions are priorities. Suitable Uses and Practical Recommendations This Twist Drill is optimised for use with a Hand Drill or other Drilling Machine setups for metalworking tasks such as fabrication, maintenance and component preparation. For best results, ensure adequate clamping of the workpiece and appropriate cutting speed for the 12 mm diameter in the chosen material. If unsure about feed rates or coolant use for specific alloys, consult technical support to match tool, machine and workpiece for efficient and safe drilling. We recommend the MetavCUT Twist Drill Type N for precision metalworking — for tailored advice, complementary technical data or application support contact METAV Werkzeuge: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Twist Drill 12 mm, short, Type N, 118°, HSS Brand: MetavCUT SKU: 40120-FDA Diameter: 12 mm Spiral Length: 101 mm Overall Length: 151 mm Tip Angle: 118° Material: HSS (High Speed Steel) Execution: short Colour: black Application: Drills for Metal / suitable for Drilling Machine and Hand Drill use Standard: DIN 338 Manufacturer: MetavCUT Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill mainly used for? The MetavCUT Twist Drill Type N is primarily applied to the machining of high-strength workpieces and larger drill diameters; its geometry is easy to regrind and it withstands considerable loads, making it well suited for demanding metal-drilling operations. Which three drill types exist? Commonly distinguished drill categories are Metal Drill, Wood Drill, and Masonry/Concrete Drill, each designed with specific point geometry and flute form for their intended materials. Why are Twist Drills tipped or sharpened? Tipping or resharpening reduces the cross-cut at the tip of the Twist Drill, which lowers friction forces and therefore reduces required feed; additionally, a sharpened point centres the bit more reliably in the workpiece. Can metal Twist Drills be used to drill wood? A Metal Drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish may be inferior compared with wood-specific bits; however, metal drills are easier to regrind and show less self-feeding action. For which drilling depths is the Twist Drill most commonly used? A solid hole drilled through material is often executed with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The general assumption that HSSE steels are universally superior to standard HSS is incorrect; selection should consider working conditions and whether the higher purchase cost of HSSE is justified for the intended application.
12mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Die kurze Ausführung kombiniert HSS-E Material mit 5% Kobaltlegierung und einem geschliffenen Schaft für erhöhte Stabilität und präzise Bohrbilder. Profitieren Sie von der hohen Standzeit und der Eignung für harte Werkstoffe wie legierten Stahl. Bestellen Sie das Produkt direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT — HSS-E, 12 mm (kurze Ausführung) Der Spiralbohrer ist ein kurzer HSS-E Metallbohrer für präzise Bohrungen in Stahl, Gusseisen und Nichteisenmetallen. Kurze Ausführung für hohe Stabilität HSS-E mit 5% Kobalt für bessere Wärmebeständigkeit Geschliffener Schaft für hohe Rundlaufgenauigkeit Spitzenwinkel 135° für harte Werkstoffe DIN 338 Norm, Zylinderschaft, Typ N Höhere Präzision durch kurze Auskraglänge Die reduzierte Auskraglänge sorgt für weniger Durchbiegung und ein ruhigeres Laufverhalten in der Bohrmaschine. Dadurch entstehen präzisere Bohrbilder und geringere Werkstückverformungen, besonders bei stationärem Einsatz. Anwender profitieren von saubereren Toleranzen und einer verringerten Nachbearbeitung. Materialwahl für anspruchsvolle Metallbearbeitung Die Legierung aus HSS-E mit 5% Kobalt erhöht die Warmfestigkeit und Verschleißresistenz, sodass der Bohrer auch bei erhöhten Schnittbedingungen länger standhält. In Kombination mit dem Spitzenwinkel 135° eignet sich die Ausführung besonders für härtere Stähle und Edelstahl, da der größere Winkel das Anbohren erleichtert und das Anfasen reduziert. Geschliffener Schaft und Normkonformität für industrielle Anwendungen Der geschliffene Zylinderschaft bietet eine bessere Spannpassung und einen sehr guten Rundlauf, was die Standzeit der Spannzange erhöht. Die Einhaltung von DIN 338 garantiert eine standardisierte Form und erleichtert den Austausch in der Fertigung. Für stationäre Säulenbohrmaschinen und präzise Handmaschineneinsätze ist die Ausführung optimal geeignet. Einsatzempfehlung und Bearbeitungshinweise Für saubere Ergebnisse sollten Kühlschmierstoffe verwendet werden und bei 12 mm Durchmesser präzise Anpunkten oder Zentrieren in Erwägung gezogen werden, wenn enge Toleranzen gefordert sind. Der Bohrer ist für Handbohrmaschine und stationäre Maschinen ausgelegt und bietet durch die kurze Länge ein geringeres Bruchrisiko bei kontrollierter Vorschubführung. Empfehlung: Vertrauen Sie auf die HSS-E Kurzbohrerlösung von MetavCUT in der Standard Line und lassen Sie sich bei technischen Fragen direkt von Metav Werkzeuge beraten — per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 47120-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Ausführung: kurz Schaft-Ausführung: geschliffen Material: HSS-E Fakten Durchmesser: 12 mm Gesamtlänge: 151 mm Spirallänge: 101 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten DIN 338 — kurze Spiralbohrer mit Zylinderschaft Typ N — Normalspirale für Metallbearbeitung 5% kobaltlegiert — höhere Warmfestigkeit Für Handbohrmaschine — geeignet für stationäre und handgeführte Maschinen Farbe: 5% kobaltlegiert FAQ Für welche Materialien ist dieser Bohrer geeignet? Der MetavCUT Spiralbohrer Standard Line (SKU 47120-FDA) mit HSS-E und 5% Kobaltlegierung ist für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle und Kunststoffe ausgelegt; durch den Spitzenwinkel 135° eignet er sich besonders für härtere Werkstoffe. Kann der Bohrer mit einer Handbohrmaschine verwendet werden? Ja, die kurze Ausführung des MetavCUT Spiralbohrers ist für Handbohrmaschine geeignet und reduziert durch die geringere Auskraglänge die Neigung zum Verbiegen, was handgeführte Arbeiten stabiler macht. Was bedeutet geschliffener Schaft und warum ist das wichtig? Ein geschliffener Schaft bedeutet, dass die Spannuten durch Schleifen geformt wurden, was sehr scharfe Kanten und hohe Rundlaufgenauigkeit liefert; der Spiralbohrer 47120-FDA bietet dadurch bessere Spannpassung und sauberere Bohrbilder im Vergleich zu rollgewalzten Varianten. Brauche ich einen Vorbohrer für 12 mm? Für den Bereich 2 mm bis 13 mm ist direktes Bohren üblich; bei hoher Präzision empfiehlt sich jedoch vorheriges Zentrieren oder ein kleines Anpunkt, um das Wandern zu vermeiden, insbesondere wenn enge Toleranzen gefordert sind.
12mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill – Extra Long HSS-G Twist Drill, Ø 12 mm, 135° Point Angle, Bright Finished, Fully Ground Shank, DIN 1869 The Twist Drill is an extra long HSS-G drilling tool for Drilling Machine applications, designed for deep-hole metalworking and precise bore guidance. Extra long design for deep drilling HSS-G ground geometry for precise holes 135° Point Angle for harder materials Fully Ground Shank for high runout accuracy Conforms to DIN 1869 for demanding tasks Deep-hole capability that reaches further The Twist Drill Extra Long variant delivers extended Spiral Length and Overall Length to access deep, hard-to-reach positions in metal components. Designed according to DIN 1869, this drill is optimised for drilling in alloyed and unalloyed Steel, Cast Iron and Non-Ferrous Metals. The extra length reduces the need for extensions or multiple setups and helps achieve consistent hole depth in one pass, which benefits workshops and maintenance teams requiring reliable deep-hole performance. Faster drilling with ground HSS-G geometry A Fully Ground HSS-G construction means the flutes and cutting geometry are produced by CNC grinding rather than rolling, resulting in very sharp cutting edges and excellent Runout Accuracy. Ground HSS (HSS-G) can enable up to 40% faster drilling and requires lower feed force compared with conventional HSS drills. The geometry also produces cleaner hole surfaces, making post-processing easier. For users less familiar with HSS-G, this term refers to hardened high-speed steel ground to precise tolerances for metal machining. Built for harder materials and better centring With a 135° Point Angle, this Twist Drill is tailored for harder materials such as stainless steel and tempered alloys; the larger angle shortens initial bore time and improves centring on tough surfaces. The drill's bright finished surface and precise tip geometry reduce walking during start-up, so even handheld Drilling Machine operations gain from improved guidance. Use of cooling and moderate speeds is recommended to maintain tool life and avoid premature wear. Practical handling and workshop recommendations Although ground HSS tools offer superior precision, they can be more brittle than rolled designs; therefore the Twist Drill Extra Long benefits from stationary drilling setups, steady feeds and appropriate coolant. Re-sharpening is possible due to the ground geometry, but it should be performed on suitable grinding equipment to preserve the specified Point Angle and flute profile. For manual drilling tasks, ensure secure clamping and moderate speed to avoid chipping at the tip. Choose the MetavCUT Extra Long Twist Drill for demanding deep-hole metalwork — for tailored technical advice and ordering support, contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Information Designation: Twist Drill (Extra Long) Brand: MetavCUT Diameter: 12 mm Point Angle: 135° Material: HSS-G Standard: DIN 1869 Spiral Length: 205 mm Overall Length: 295 mm Shank Finish: Fully Ground Surface Colour: Bright Finished Intended Use: Drill for Metal / Drilling Machine Model Series: Standard Line Execution: Extra Long Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill suitable for? The MetavCUT Twist Drill (Extra Long, HSS-G) is suitable for a range of metals including alloyed and unalloyed Steel, Cast Iron, Sintered Iron and Non-Ferrous Metals; its ground geometry is especially effective when machining tougher materials. How does the Fully Ground HSS-G design benefit accuracy? The Fully Ground HSS-G construction of the MetavCUT Twist Drill produces very sharp cutting edges and high Runout Accuracy, resulting in cleaner, more precise holes and improved centring during drilling. For what is a Twist Drill used? A Twist Drill is primarily applied when machining high-strength materials and large drill diameters; its shape lends itself to grinding and it endures greater loads, making it suitable for deep holes and robust metalworking tasks. Which three drill types exist? The three main drill types are Metal Drills, Wood Drills and Stone/Concrete Drills.
12mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — Metal Twist Drill, 12 mm, 135°, Extra long, Bright finished, HSS‑G, DIN 1869 The Twist Drill is a high‑performance metal drilling tool for drilling machines, engineered for deep and precise holes in alloyed and unalloyed steels and other hard materials. Extra long design for deep hole applications HSS‑G fully ground for fast, precise cutting 135° tip angle for hard material entry Bright finished surface for smooth chip evacuation Suitable for drilling machines and workshop use Faster metal drilling with proven HSS‑G performance Das HSS‑G Material bietet eine hohe Schneidleistung und ermöglicht eine deutlich effizientere Bearbeitung harter Werkstoffe. Durch den CNC‑Schliff sind die Spannuten scharf und die Rundlaufgenauigkeit hoch, was zu sauberen Bohrlöchern führt. Der geschliffene Bohrer arbeitet nachweislich bis zu 40% schneller und benötigt dabei etwa 50% weniger Anpresskraft als konventionelle HSS‑Ausführungen, was die Produktivität in Serien- und Werkstattanwendungen erhöht. Designed for deep, hard‑material drilling Mit einer Gesamtlänge von 375 mm und einer Spirallänge von 260 mm ist diese Ausführung speziell für tiefe Bohrungen konzipiert. Der 135° Spitzenwinkel reduziert das Anbohren bei harten Werkstoffen und verbessert die Zentrierung der Spitze, wodurch Einstechvorgänge kontrollierter ablaufen. Diese Kombination aus Länge und Spitze macht das Werkzeug besonders geeignet für legierten Stahl, Gusseisen und ähnliche Anwendungen. Präzision, Handhabung und Hinweise zur Anwendung Die voll geschliffene Schaftausführung sorgt für hohen Rundlauf und eine präzise Führung im Spannfutter. Aufgrund der Schliffgeometrie sind diese Bohrer schärfer, aber auch empfindlicher gegenüber Schlagbelastungen; daher empfiehlt sich der Einsatz mit ausreichender Kühlung und bei Bedarf stationäreren Bohrbedingungen. Die helle Oberfläche unterstützt den Spanabfluss und reduziert Reibung in tiefen Bohrungen. Wer profitiert von diesem Twist Drill Werkstätten, Instandhaltungsteams und professionelle Anwender, die tiefe und präzise Bohrungen in Metallen durchführen, profitieren besonders von dieser Ausführung. Der Bohrer folgt der Norm DIN 1869 und ist Teil der Standard Line von MetavCUT, wodurch sichergestellt ist, dass er in industriellen Abläufen zuverlässig und reproduzierbar eingesetzt werden kann. Strong recommendation: Choose MetavCUT’s HSS‑G Twist Drill for demanding deep metal drilling — METAV Werkzeuge offers expert consultation and technical support via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 33120-FDA Diameter: 12 mm Tip angle: 135° Execution: Extra long Overall length: 375 mm Spiral length: 260 mm Material: HSS‑G Shank finish: Fully ground Colour: Bright finished Standard: DIN 1869 Intended for: Drilling Machine (handheld and workshop machines) Model series: Standard Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill suitable for? The MetavCUT Twist Drill (HSS‑G) is designed primarily for metalworking and is suitable for alloyed and unalloyed steel, cast iron, sintered iron, non‑ferrous metals and hard plastics, providing reliable results when used with appropriate speeds and cooling. Can the MetavCUT Twist Drill be used in a handheld drilling machine? Yes, the MetavCUT Twist Drill is intended for use in drilling machines, including many handheld models, but for best precision and to reduce breakage risk the use in a stable setup with cooling is recommended. What is a Twist Drill used for? A Twist Drill is mainly applied for machining high‑strength materials and large drill diameters; its shape allows relatively easy resharpening and it withstands substantial loads. Which three drill types exist? The three main drill types are metal drills, wood drills and stone/concrete drills. Why are twist drills sharpened (pointed)? Sharpening reduces the cross‑cut at the tip, lowering frictional forces and thus requiring less feed force while improving the drill tip’s centring in the workpiece. Can a metal twist drill be used to drill wood? Metal drills can be used in wood but typically offer poorer guidance and less clean results; they are easier to resharpen and have reduced self‑feeding compared with dedicated wood drills. For which drilling depths is the twist drill most commonly used? Twist Drills are the standard tool for through drilling in solid material; they are most common for diameters up to 20 mm and drilling depths up to approximately 100 mm.
12mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — Twist Drill, 12 mm, 135°, Extra Long, Bright Finished, Fully Ground, DIN 1869, HSS‑G (MetavCUT) The Twist Drill is an extra long HSS‑G metal drill designed for deep, precise holes in demanding materials such as alloyed and unalloyed steel. Twist Drill 12 mm diameter for deep holes Extra long design for deep and hard-to-reach holes 135° point angle suited for harder materials HSS‑G fully ground for precise metal drilling DIN 1869 standard with 480 mm overall length Engineered for deep, consistent metal drilling with reduced effort The extra long geometry of this Twist Drill combines a 480 mm overall length with a 330 mm spiral length, making the bit particularly suited for applications where reach is critical. The 12 mm diameter maintains stability while permitting access into recessed or hard‑to‑reach positions. Designed for use on a Drilling Machine, the tool’s construction allows straightforward integration into workshop routines and industrial tasks where deep, straight bores are required. Faster feeds and cleaner holes thanks to fully ground HSS‑G construction A Fully Ground HSS‑G designation means the flute geometry is manufactured by CNC grinding rather than rolling, resulting in sharp cutting edges and high concentricity. This produces noticeably cleaner holes and precise guidance in metals. With a 135° point angle, the bit reduces initial deflection on harder materials; the grinding and geometry together enable up to 40% faster drilling and can require 50% less feed force compared with conventional HSS variants under comparable conditions, improving efficiency for repetitive metalworking tasks. Suitable applications and careful usage recommendations This tool is intended for metal drilling and performs best in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, tempered cast materials, non‑ferrous metals and hard plastics. Because HSS‑G items can be more brittle than rolled types, the bit is particularly appropriate for stationary setups or when good coolant and stable clamping are available. For portable hand‑held drilling, ensure secure workholding and appropriate cooling to minimise risk and extend service life. Practical advantages for workshops and maintenance departments The combination of reach and precision makes this bit valuable for maintenance, toolroom, and fabrication tasks where access is constrained. The bright finished surface eases chip evacuation visibility and inspection, while the DIN 1869 conformity signals suitability for deeper drilling operations under more demanding conditions. Opting for a fully ground HSS variant provides benefits in hole quality and repeatability when machining harder or alloyed materials. We recommend the MetavCUT Twist Drill for deep, high‑precision metal drilling — for technical questions or personalised advice METAV Werkzeuge provides comprehensive support via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical information Designation: Twist Drill Brand: MetavCUT SKU: 34120-FDA Diameter: 12 mm Point angle: 135° Execution: Extra long Colour: Bright finished Total length: 480 mm Spiral length: 330 mm Shank execution: Fully ground Material: HSS‑G Standard: DIN 1869 For drilling machine: Drilling Machine Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ How deep can the MetavCUT Twist Drill reach? The MetavCUT Twist Drill is designed for deep drilling tasks thanks to its extra long geometry: a total length of 480 mm and a spiral length of 330 mm provide extended reach for recessed bores and hard‑to‑access positions on a Drilling Machine. Which materials is the MetavCUT Twist Drill suitable for? The MetavCUT Twist Drill in HSS‑G is suitable for alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Cast materials, Non‑ferrous Metals and Hard Plastics, delivering precise, repeatable holes when used with appropriate coolant and fixturing. For what is a Twist Drill used? A Twist Drill such as the MetavCUT Twist Drill is mainly used when working on high‑strength materials and larger diameters; its geometry lends itself to easy re‑grinding and it endures higher loads, making it a reliable choice for heavy‑duty metalworking. Which three drill types exist? The main drill categories are Metal drills, Wood drills and Stone/Concrete drills, each optimised in geometry and cutting edge for their respective materials. Why are Twist Drills point‑ground? Point‑grinding reduces the chisel edge at the tip of the Twist Drill, lowering friction and thus the required feed forces; at the same time the ground point improves centring of the tip in the workpiece for more accurate starts. Can a Metal drill be used for wood? A Metal drill like the MetavCUT Twist Drill can be used in Wood, but guidance is reduced and the finish may be less clean; however such drills are easier to re‑sharpen and exhibit lower self‑feed behaviour. At what drilling depths is the Twist Drill most commonly used? Twist Drills are commonly applied for through‑solid holes; in typical practice they are used for diameters up to 20 mm and drilling depths up to approx. 100 mm, depending on geometry and setup. What is better, HSS or HSSE? The general assumption that HSSE is categorically superior to HSS is not universally correct; selection should consider actual working conditions to determine whether the additional cost of HSSE is justified.
12mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Introducing the Twist Drill — Short Type N, 12 mm, 135° (HSS-G, DIN 338, Bright Finished, Fully Ground Shank) by MetavCUT The Twist Drill Short Type N is a short HSS-G metal drill designed for precise work in Drilling Machines and handheld drills, optimised for harder alloys and stainless materials. High-performance HSS-G for demanding metals Short design for superior stability and precision 135° point angle for stainless and hard steels Fully ground shank for secure clamping Conforms to DIN 338 for standardised short drills Maximise throughput with proven HSS-G performance The Twist Drill is manufactured from HSS-G, a ground high-speed steel that enables up to 40% faster drilling and requires about 50% less feed force compared with conventional HSS drills. This efficiency translates into shorter cycle times and reduced operator effort when machining alloyed and unalloyed steels, cast steel, cast iron, sintered iron, tempered cast materials, non-ferrous metals and hard plastics. The combination of material and geometry prioritises consistent chip evacuation and longer cutting life, which benefits workshops and production environments that demand reliability and repeatable throughput. Short length and DIN 338 for precision and rigidity Built to DIN 338 as a short twist drill with a cylindrical shank, this tool reduces overhang and bending compared with standard-length variants. The Short overall form factor and reduced exposed length increase rigidity, improving hole accuracy and reducing the risk of walk or runout when set up in a chuck. This makes the drill particularly suitable for operations where tight tolerances and straightness matter, such as jigs, fixtures and bench drilling. The bright finished surface aids visibility and handling during setup while maintaining the intact cutting geometry. Tool geometry tailored to tough materials With a 135° point angle and the classic Type N normal spiral, the design favours drilling into harder and tougher materials. The larger point angle reduces the risk of tip breakage and lowers cutting forces on stainless steels and other hard alloys, while still providing acceptable centring characteristics on flat surfaces. The Fully ground shank ensures a secure grip in chucks and collets, enabling consistent concentricity and minimising slippage under higher torque loads typically encountered in metalworking. Practical advantages, handling and maintenance The bright finished surface and ground manufacturing reduce burrs and facilitate initial clamping and alignment. For users with limited experience of drill geometry: the point angle controls penetration aggressiveness and centring behaviour — a 135° angle is chosen here to balance wear resistance with manageable feed. Regrinding is straightforward for workshop maintenance, and the robust construction supports repeated sharpening without excessive loss of diameter. For routine workshop use, this tool offers a predictable lifecycle and simplified changeover. I recommend the MetavCUT Twist Drill Type N for demanding metalworking tasks; for technical guidance or to confirm suitability for a specific application, contact METAV Werkzeuge for expert consultation at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Precise Technical Data for Setup Designation: Twist Drill Brand: MetavCUT SKU: 27120-FDA Diameter: 12 mm Spiral Length: 101 mm Overall Length: 151 mm Point Angle: 135° Material: HSS-G Standard: DIN 338 Type: Type N Execution: Short Shank Finish: Fully ground Colour / Surface: Bright finished Application: Drills for metal For: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills mainly used for? Twist Drills such as the MetavCUT Twist Drill Type N are primarily applied to the machining of high-strength materials and larger drill diameters; their geometry and material allow drilling in alloyed and unalloyed steels, cast and sintered irons and hard plastics. The shape is relatively easy to sharpen and withstands higher loads. Which three drill types exist? The three common categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Type N falls into the metal drill category and is optimised for metalworking tasks. Can this twist drill be used in a handheld drill or a drilling machine? The MetavCUT Twist Drill Type N is suitable for use in Drilling Machines and can be employed in handheld drills where the setup provides sufficient rigidity; for best concentricity and life, prefer a stable chuck or collet and appropriate feed rates. Are you unsure whether this tool meets your requirements or need additional technical data? METAV Werkzeuge offers comprehensive, competent advice — contact us at info@metav-werkzeuge.com, call +49 2822 7131930 or message via WhatsApp +49 170 2837271.
12mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N, short HSS‑G 12 mm, 135° tip, bright finished (DIN 338) by MetavCUT The Twist Drill (Type N) is a short HSS‑G metal‑drilling bit designed for precise work in hard materials on a Drilling Machine. Short design for improved stability and precision Fully ground shank for high Runout accuracy 135° tip for better centring in hard metals Conforms to DIN 338 for standardized quality Bright finished surface for corrosion resistance and inspection Precision and speed through engineered geometry The HSS‑G construction and the short design deliver measurable advantages in metalworking. A shorter protruding length reduces bending and vibration, which directly improves hole quality and tool life. The fully ground flute geometry ensures sharp cutting edges and superior Runout Accuracy, while the specified 135° tip angle shortens plunge time in harder materials. For tasks that demand consistent hole geometry and minimal rework, this combination offers faster drilling with lower required feed force. Reliable performance in demanding metal applications Designed as a Type N normal spiral, the Twist Drill by MetavCUT is particularly suited to alloyed and unalloyed steels, cast steel, cast iron variants, sintered iron, and many non‑ferrous metals. The geometry supports effective chip evacuation during Through‑Drilling and contributes to clean, burr‑reduced holes. The 135° tip reduces the tendency to walk at start‑up and helps with centring when pre‑drilling is impractical, making it a solid choice for production or repair work on a Drilling Machine. Handling, sharpening and recommended use Because the flutes are produced by CNC grinding (HSS‑G), the bit achieves very sharp edges and high concentricity but can be more brittle than rolled alternatives; therefore, cutting fluids and appropriate speeds are recommended for stationary or guided drilling operations. The fully ground shank simplifies clamping and reduces slippage in the chuck. When reconditioning is needed, the ground geometry is easier to resharpen precisely, maintaining performance over multiple regrinds. Strong recommendation: For precision metalworking choose MetavCUT’s Twist Drill Type N to improve hole quality and machining efficiency — METAV Werkzeuge provides expert advice and technical support at info@metav-werkzeuge.com or by phone +49 2822 7131930 and WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45120-FDA Diameter: 12 mm Spiral Length: 101 mm Overall Length: 151 mm Tip Angle: 135° Type: Type N Execution: short Material: HSS-G Shank Finish: fully ground Colour/Surface: bright finished For Machine: Drilling Machine Model Series: Standard Line Application: Drills for metal Norm: DIN 338 Packing Unit: 5 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for? The MetavCUT Twist Drill Type N is used primarily for machining high‑strength materials and larger drill diameters; it is easy to resharpen and withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types exist? For general applications the common categories are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill group and is optimised for ferrous and many non‑ferrous materials. Is the MetavCUT Twist Drill suitable for stainless steel? The MetavCUT Twist Drill Type N with a 135° tip is intended for harder materials and is appropriate for drilling stainless steel when used with recommended speeds, lubrication and a stable clamping setup.
12mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Spiralbohrer) – MetavCUT Profi Line, HSS-G short, Ø 12 mm, 135° tip, Type N, Bright Finished, fully ground shank, DIN 338 The Twist Drill short HSS-G Type N is a precision metalworking bit designed for stable, fast drilling on drilling machines and hand drills. Short design for increased stability HSS-G ground geometry for sharp cuts 135° tip for harder materials like stainless steel Fully ground shank for high concentricity Conforms to DIN 338 for metalworking Faster, cleaner holes thanks to HSS-G geometry and short length The short HSS-G construction combines a reduced overall length with a CNC-ground flute geometry to deliver higher stability and very precise results. Compared with conventionally produced HSS bits, this ground design enables up to 40% faster drilling while requiring about 50% less thrust force, which reduces operator fatigue and tool deflection. For workshop environments where repetitive, exact holes are required, this format significantly improves cycle times and hole quality. Suitable for demanding metals and precise machine work This short Twist Drill is engineered for metalworking applications and performs reliably in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics. Its robustness and short cantilevered length make the tool especially suitable for stationary drilling machines and guided hand drills where runout and wobble must be minimised. The result is consistent, concentric holes and a lower scrap rate in batch production. Built to DIN 338 with Type N normal spiral and 135° tip for hard materials Manufactured to DIN 338 as a short cylindrical‑shank drill, this Type N normal spiral bit offers the classical metal‑drilling geometry optimised for tougher materials. The 135° point angle reduces the tendency to wander on entry and shortens the initial breakthrough time when working stainless steel and other hard alloys. “Ground” flutes mean extremely sharp cutting edges and excellent concentricity, while users should note that ground HSS can be more brittle than rolled variants and benefits from cooling and steady feed. Designed for professionals — handling tips and who benefits most Workshops, toolrooms and professional metalworkers benefit most from the precision and durability of this short HSS‑G Twist Drill. For best results, use appropriate cutting fluid and moderate speeds to extend tool life and avoid sudden shocks that can cause breakage. The fully ground shank ensures excellent clamping and minimal runout in standard chucks. If application specifics or machine compatibility are unclear, expert advice is available from METAV Werkzeuge to ensure the chosen tool matches the job. Strong recommendation: Choose the MetavCUT Profi Line short HSS‑G Twist Drill for reliable, high‑precision metal drilling — for technical questions or personalised advice contact METAV Werkzeuge via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 48120-FDA Execution: short Diameter: 12 mm Spiral length: 101 mm Overall length: 151 mm Tip angle: 135° Type: Type N Material: HSS-G Shank finish: fully ground Surface finish: bright finished For machine: Drilling Machine / Hand Drill Application: Drills for metal Model series: Profi Line Norm: DIN 338 Shaft execution: geschliffen Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit the MetavCUT Profi Line Type N? The Twist Drill from MetavCUT Profi Line Type N is mainly used for machining high‑strength materials and larger drill diameters; its short, ground geometry makes it easier to resharpen and able to withstand higher loads, so it is particularly suited to demanding metalworking tasks. Which three drill types exist? There are three common categories: metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill family (Type N) and is optimised for metalworking applications.
12mm HSS-G Twist Drill DIN 338 ,short, TIN-coated - MetavCUT
Spiralbohrer von MetavCUT — kurzer HSS-G-Bohrer 12 mm Spiralbohrer in kurzer Ausführung für präzise Metallbearbeitung an stationären und handgeführten Maschinen Kurze Ausführung für hohe Stabilität TIN-Beschichtung reduziert Verschleiß HSS-G geschliffen für präzise Bohrlöcher Spitzenwinkel 118° für universelle Anwendungen Geeignet für Handbohrmaschine und stationäre Maschinen Präzision und Stabilität bei der Metallbearbeitung Der kurze Spiralbohrer aus der Basic Line von MetavCUT kombiniert reduzierte Auskraglänge mit einer geschliffenen HSS-G-Geometrie und sorgt so für deutlich geringere Vibrationen und verbesserte Rundlaufgenauigkeit. Durch die kürzere Gesamtlänge reduziert sich das Risiko von Verbiegen, womit saubere und maßhaltige Bohrlöcher erzielt werden. Anwender profitieren von schnellerer Bearbeitung, da der geschliffene Aufbau das Eindringen in harte Werkstoffe erleichtert und punktgenaues Anstechen ermöglicht. Beschichtung und Material für längere Standzeit Die TIN-Beschichtung verringert Reibung und Wärmeentwicklung beim Bohren in Stahl und Nichteisenmetallen, sodass die Lebensdauer des Werkzeugs steigt. In Kombination mit dem HSS-G-Grundstoff bleibt die Schneidkante länger scharf, was geringere Stillstandzeiten und selteneren Werkzeugwechsel bedeutet. Bei Einsatz eines geeigneten Kühlmittels werden Verschleiß und Temperaturspitzen weiter reduziert, wodurch die Bohrleistung in legierten und unlegierten Stählen optimal erhalten bleibt. Einsatzgebiete und Zielgruppe Konzipiert für die Bearbeitung von Stahl, Temperguss, Gusseisen, Sintereisen sowie Kupfer, Bronze und Hartkunststoff, eignet sich der kurze Spiralbohrer besonders für Werkstätten, Instandhaltung und den professionellen Maschinenbau. Stationäre Säulenbohrmaschinen und leistungsfähige Handbohrmaschinen profitieren gleichermaßen von der stabilen Bauform. Die DIN 338-Konformität stellt sicher, dass das Werkzeug sich nahtlos in bestehende Arbeitsabläufe fügt und industriellen Qualitätsanforderungen genügt. Anwendungshinweise für effiziente Nutzung Für beste Ergebnisse vorbohren oder anpunkten, falls hohe Rundlaufgenauigkeit gefordert ist. Der Spitzenwinkel von 118° ist universell einsetzbar und bietet gute Zentrierung bei vielen Materialien; für sehr harte oder sehr weiche Werkstoffe kann ein anderer Winkel sinnvoll sein. Kühlung und mäßiger Vorschub erhöhen die Standzeit. Bei geschliffener Schaftausführung ist auf sichere Spannaufnahme zu achten, um Bruchrisiken zu minimieren. MetavCUT empfiehlt den kurzen HSS-G Spiralbohrer mit TIN-Beschichtung für anspruchsvolle Metallbearbeitung; bei Fragen technische Details per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 erfragen Produktmerkmale Artikelnummer: 28120-FDA Hersteller: MetavCUT Bezeichnung: Spiralbohrer Serie: Basic Line Norm: DIN 338 Material: HSS-G Daten Durchmesser: 12 mm Gesamtlänge: 151 mm Spirallänge: 101 mm Spitzenwinkel: 118° Verpackungseinheit: 5 Besonderheiten Ausführung: kurz Schaftausführung: geschliffen Beschichtung: TIN-beschichtet Anwendung: Bohrer für Metall Für Bohrmaschine: Handbohrmaschine Eignung: legierte und unlegierte Stähle, Temperguss, Gusseisen, Sintereisen, Nichteisenmetalle, Hartkunststoff FAQ Wie unterscheidet sich der geschliffene HSS-G Spiralbohrer von gerollten Ausführungen? Der geschliffene Spiralbohrer bietet schärfere Schneiden und höhere Rundlaufgenauigkeit, was sauberere Bohrlöcher in harten Werkstoffen ermöglicht; MetavCUT liefert deshalb die geschliffene Ausführung für präzise Metallarbeiten. Ist der kurze Bohrer mit TIN-Beschichtung für Edelstahl geeignet? Die TIN-Beschichtung reduziert Reibung und erhöht Standzeit auch bei anspruchsvolleren Stählen; für hochlegierte, zähe Edelstähle kann jedoch spezielle Hartmetalltechnik vorteilhafter sein. Welche Maschine passt am besten zum Spiralbohrer 28120-FDA? Der Spiralbohrer wurde für den Einsatz an leistungsfähigen Handbohrmaschinen und stationären Säulenbohrmaschinen konzipiert und ermöglicht dort stabile, präzise Bohrprozesse. Wie verbessert die kurze Ausführung die Arbeit in der Werkstatt? Durch die kürzere Auskraglänge sinkt die Neigung zum Verbiegen, was die Präzision erhöht und die Rüstzeit für Nacharbeit reduziert; Anwender erzielen so wirtschaftlichere Fertigungsabläufe. Welche Rolle spielt der Spitzenwinkel 118° bei der Anwendung? Der Spitzenwinkel 118° bietet eine gute Zentrierung und eignet sich für eine breite Palette von Materialien; er erleichtert das Einstichverhalten und reduziert das Wandern beim Anbohren.
12mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Spiralbohrer 12 mm – HSS-G, TiN-beschichtet von MetavCUT Der Spiralbohrer 12 mm ist eine kurze, geschliffene Ausführung für präzise Metallbohrungen und eignet sich besonders für die Bearbeitung von legierten und unlegierten Stählen sowie Nichteisenmetallen. Kurze Ausführung für hohe Stabilität beim Bohren Geschliffenes HSS-G für scharfe Schneiden und hohe Rundlaufgenauigkeit TiN-Beschichtung reduziert Reibung und erhöht Verschleißfestigkeit 135° Spitzenwinkel für anspruchsvolle, härtere Werkstoffe DIN 338 konform, geeignet für stationäre und handgeführte Maschinen Robuste Ausführung für präzise Metallbearbeitung Die kurze Bauart sorgt für eine deutlich geringere Auskraglänge und damit für höhere Stabilität und weniger Neigung zum Verbiegen. Durch die geschliffene Fertigung (HSS-G) entstehen sehr scharfe Kanten und eine hohe Rundlaufgenauigkeit, was saubere, maßhaltige Bohrlöcher garantiert. Diese Eigenschaften machen den Bohrer ideal für Werkstatt, Maschinenbau und Instandsetzung, wenn es auf Präzision und Wiederholgenauigkeit ankommt. Schnellere Bearbeitung bei geringerem Kraftaufwand Der geschliffene HSS-Bohrer ermöglicht ein bis zu 40 % schnelleres Bohren und benötigt dabei 50 % weniger Anpresskraft als herkömmliche HSS-Werkzeuge. Die TiN-Beschichtung (Titan-Nitrid) reduziert Reibung und Hitzeentwicklung, was die Standzeit deutlich verlängert. Bei Verwendung einer geeigneten Kühlung werden Reibung und Verschleiß weiter vermindert, sodass sich Produktivität und Werkzeuglebensdauer positiv auswirken. Breites Anwendungsspektrum und Zielgruppe Dieser Bohrer ist für die Bearbeitung von legiertem und unlegiertem Stahl, Temperguss, Gusseisen, Sintereisen, Neusilber, Kupfer, Bronze und Hartkunststoff ausgelegt. Anwender aus Handwerk, Industrie und Fachhandel profitieren gleichermaßen von der Kombination aus hoher Schnittqualität und robustem Design. Durch die Normkonformität (DIN 338) lässt sich das Werkzeug nahtlos in bestehende Fertigungsprozesse integrieren. Praxistipps für sicheren Einsatz und lange Standzeit Ein 135° Spitzenwinkel erleichtert das Anbohren härterer Werkstoffe und reduziert das Auslaufen beim Anbohren. Bei Durchmesser 2–13 mm kann direkt gebohrt werden; für besonders genaue Passungen empfiehlt sich vorheriges Anpunkten mit einem Zentrierbohrer. Kühlung und angepasste Schnittgeschwindigkeit sind bei thermisch sensiblen Werkstoffen Pflicht, um Bruchrisiken zu minimieren und die Lebensdauer zu maximieren. Mit dem TiN-beschichteten HSS-G Spiralbohrer von MetavCUT erhalten Sie langlebige Präzision für anspruchsvolle Metallbohrungen – fragen Sie den Artikel 46120-FDA direkt bei Metav an über info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930. Produktmerkmale Artikelnummer: 46120-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Norm: DIN 338 Fakten Durchmesser: 12 mm Gesamtlänge: 151 mm Spirallänge: 101 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Stück Besonderheiten Material: HSS-G (geschliffen: hohe Schärfe, hohe Rundlaufgenauigkeit) Beschichtung: TIN-beschichtet (Titan-Nitrid: reduziert Reibung, erhöht Standzeit) Schaftausführung: geschliffen Ausführung: kurz Typ: Typ N (Normalspirale) Für Bohrmaschine: Handbohrmaschine FAQ Für welche Materialien ist dieser Spiralbohrer geeignet? Der MetavCUT Spiralbohrer 12 mm eignet sich für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen, Neusilber, Kupfer, Bronze und Hartkunststoff und bietet dabei durch die TiN-Beschichtung erhöhte Verschleißfestigkeit. Ist der Bohrer für Handbohrmaschinen geeignet? Ja, die kurze Ausführung und die robuste Schaftausführung machen den Spiralbohrer 12 mm auch für die Verwendung in Handbohrmaschinen geeignet; bei hoher Präzision sollte jedoch angepunktet werden. Welche Vorteile bringt die TiN-Beschichtung konkret? Die TiN-Beschichtung reduziert Reibung und Hitze, wodurch die Standzeit des HSS-G Spiralbohrers verlängert und der Verschleiß beim Bohren von Metall deutlich reduziert wird. Warum ist geschliffen (HSS-G) besser für Metallbohrungen? Geschliffene Bohrer besitzen sehr scharfe Schneiden und eine hohe Rundlaufgenauigkeit, was zu saubereren Bohrlöchern führt; beim MetavCUT Spiralbohrer bedeutet HSS-G bessere Schnittleistung bei harten Werkstoffen. Welchen Einfluss hat der 135° Spitzenwinkel? Der 135° Spitzenwinkel erleichtert das Anbohren härterer Werkstoffe und reduziert das Auslaufen; er ist besonders geeignet für Edelstahl und andere härtere Stähle. Wie viele Bohrer sind in der Verpackungseinheit? Die Verpackungseinheit des MetavCUT Spiralbohrers 12 mm umfasst 5 Stück (Artikelnummer 46120-FDA).
12mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill — Short HSS‑G Metal Drill, 12 mm, TIN‑coated, Type N, 135° Tip (DIN 338) The Twist Drill (Type N) is a short HSS‑G metal drill designed for precise work in hard materials on a drilling machine. Short design for higher stability and precision 12 mm diameter for standard metal applications 135° tip angle optimized for hard materials TIN‑coated surface for reduced wear and longer life Fully ground shank for improved centring and runout Faster, more stable drilling for demanding metalwork A short twist drill reduces the exposed length and therefore the tendency to deflect; this means higher Stability and more accurate holes when working with metal. The fully ground HSS‑G geometry allows up to 40% faster drilling and requires about 50% less thrust compared with conventional HSS bits, so fewer feed force issues occur during manual or machine drilling. For users this translates into cleaner bores and less rework. Coating and material that extend tool life The TIN‑coated surface (Titanium Nitride) lowers friction and increases wear resistance during metal cutting, especially under proper cooling. The HSS‑G substrate combines toughness with cutting sharpness; the coating plus cooling reduces thermal and abrasive wear and therefore extends the tool life when machining alloyed and unalloyed steels, cast materials and non‑ferrous metals. For operators this means longer tool cycles and fewer tool changes. Suited to hard materials and precision requirements With a 135° tip angle, this short Twist Drill is tailored for harder workpieces such as stainless steel and tempered alloys where a blunter point reduces initial chipping and improves centring. The Type N normal spiral is the classic choice for most metal drilling tasks, making it especially suitable for workshop and industrial applications on drilling machines. Novices: a larger tip angle reduces the tendency to “grab” on entry and shortens the time needed to start the hole. Designed for professionals and workshop routines Belonging to the Profi Line series, this drill was developed for users who prioritise repeatable accuracy and robustness in production or repair shops. The fully ground cylindrical shank improves concentricity in chucks and collets, making the tool a good match for bench drills and CNC machines alike. Workshops and craftsmen benefit from reduced scrap and higher first‑pass success rates. Strong recommendation: Choose the MetavCUT Profi Line short TIN‑coated HSS‑G Twist Drill 12 mm for precise, durable metal drilling — for tailored advice contact METAV Werkzeuge by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Designation: Twist Drill, Short, 12 mm, TIN‑coated, HSS‑G, Type N Marke: MetavCUT SKU: 41120-FDA Diameter: 12 mm Overall length: 151 mm Spiral length: 101 mm Tip angle: 135° Execution: Short Shank execution: Fully ground Coating: TIN‑coated Material: HSS‑G Standard: DIN 338 Application: Drills for metal Suitable for: Drilling Machine Model series: Profi Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Can the MetavCUT Twist Drill Type N be used for stainless steel and other hard metals? The MetavCUT Twist Drill Type N, made from HSS‑G with a 135° tip and TIN coating, is suitable for stainless steel and many hard metals; the larger tip angle and coating reduce chipping and wear, provided that appropriate cutting speed and coolant are used. What are Twist Drills used for? Twist Drills are primarily used for machining high‑strength materials and larger drill diameters; their shape allows easy resharpening and they withstand higher loads, making them ideal for metalworking and demanding workshop tasks. Which three drill types exist? The main drill categories are metal drills, wood drills and stone/concrete drills.
12mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Twist Drill — Metal Twist Drill, 12 mm, 135° Point Angle, Long (DIN 340), Bright Finished, Fully Ground, HSS-G A Twist Drill long HSS‑G drill for deep metal holes, optimised for drilling machines and workshop applications. Long HSS‑G design for deep hole drilling 12 mm Diameter for precise, centred holes 135° Point Angle for harder materials and stainless steel Fully Ground Shank for high runout accuracy Bright Finished surface for improved handling and corrosion protection Durable HSS‑G construction for efficient metalworking The Twist Drill is manufactured from HSS‑G, a high‑speed steel with CNC grinding that creates very sharp cutting edges and excellent concentricity. This construction allows up to 40% faster drilling and requires about 50% less thrust force compared with conventionally formed HSS drills, which translates into less operator fatigue and more efficient machining. For customers working with steels, cast materials and harder non‑ferrous alloys, this combination significantly improves cycle times while maintaining hole quality. Designed for deep holes and hard materials Built to the DIN 340 long specification, the drill’s extended spiral length (Spiral Length 121 mm) and overall length (184 mm) make it particularly suitable when drill access is restricted or when deeper bores are required. The 135° point angle reduces initial biting on tough materials like stainless steel and cast iron, improving centring and reducing the tendency to wander. Use with an appropriate drilling machine and the correct speeds to exploit the long geometry for clean, precise bores. Precision geometry and finish for clean results The fully ground flute geometry and fully ground shank produce a high degree of runout accuracy, ensuring straighter holes and a better surface finish. The bright finished surface helps with chip evacuation and handling. These design elements are especially beneficial in professional workshops where repeatability and tool life are critical. Note that ground HSS drills can be more brittle than rolled types, so stable clamping and coolant are recommended for demanding tasks. Practical tips for use, maintenance and support For optimal performance, operate the drill at speeds and feeds matched to the material, and use coolant when machining harder steels to avoid overheating and premature wear. The ground geometry makes re‑grinding possible, but take care—grinding among professionals preserves the correct point angle and helix for continued precision. If uncertain about suitability for a specific task or needing further technical data, METAV Werkzeuge offers comprehensive, expert advice and support to help select the right tool and machining parameters. Choose the MetavCUT Twist Drill for reliable deep‑hole metal drilling — for personalised technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill 12 mm Brand: MetavCUT SKU: 53120-FDA Diameter: 12 mm Point Angle: 135° Execution: Long (lang) Spiral Length: 121 mm Overall Length: 184 mm Shank Finish: Fully Ground (geschliffen) Surface Finish: Bright Finished (blank) Material: HSS‑G Standard: DIN 340 For Machine Type: Drilling Machine (Handbohrmaschine) Application: Drills for Metal / Bohrer für Metall Model Series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit the MetavCUT Twist Drill? The MetavCUT Twist Drill is primarily designed for metal drilling and is particularly suited to alloyed and unalloyed steel, cast steel, cast iron, sintered iron, temper cast, non‑ferrous metals and hard plastics; its long HSS‑G design allows deep or hard‑to‑reach bores with good precision. Which three drill types are commonly distinguished? Common drill types are: metal drills, wood drills, and masonry/concrete drills, and the MetavCUT Twist Drill belongs to the metal drill category tailored for machining metals.
12mm HSS‑G Spiralbohrer, 135° Spitzenwinkel, reduziert 10mm Schaft, geschliffen, DIN 338, 151mm Länge, silber - MetavCUT
Kombinieren Sie die HSS-G-Schneidqualität mit der geschliffenen Geometrie und dem reduzierten Schaft 10 mm für präzise Metallbohrungen; diese Kombination sorgt für geringeren Anpressdruck und schnelle Spanabfuhr. Bestellen Sie den Spiralbohrer direkt über MetavCUT oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer 12 mm HSS-G – MetavCUT Standard Line Der Spiralbohrer 12 mm ist ein geschliffener Kurzspiralbohrer für präzise Metallbearbeitung an stationären und beweglichen Werkzeugmaschinen. Geschliffene Geometrie für besonders saubere Bohrlöcher Reduzierter Schaft 10 mm für engere Bohrfutter 135° Spitzenwinkel für harte Werkstoffe Geeignet für legierten und unlegierten Stahl Entspricht DIN 338 für kurze Spiralbohrer Präzision und Effizienz bei Metallbohrungen Die geschliffene Ausführung sorgt für scharfe Schneiden und hohe Rundlaufgenauigkeit, wodurch sich die Bohrzeiten gegenüber herkömmlichen Werkzeugen deutlich reduzieren lassen. Bei Einsatz in Stahl oder Gusswerkstoffen ermöglicht die HSS-G-Legierung ein gleichmäßiges Spanverhalten und eine verbesserte Oberflächenqualität des Bohrlochs. Für Anwender bedeutet das: weniger Nacharbeit und höhere Fertigungsstabilität durch konstante Bohrergebnisse. Materialwahl, Haltbarkeit und Einsatzempfehlung Die Verwendung von HSS-G steht für hohe Verschleißfestigkeit bei guter Zähigkeit; die geschliffene Spiralform ist speziell für Metallbearbeitung optimiert. Im Vergleich zu rollgewalzten Ausführungen bietet diese Variante schnellere Schnittwerte, benötigt jedoch eine kontrollierte Kühlung und ruhige Maschinenaufnahme. Deshalb empfiehlt sich der Einsatz an stationären Säulenbohrmaschinen oder an gut geführten Werkzeugmaschinen, um Bruchrisiken zu minimieren. Kompatibilität, Maschineneinsatz und Bohrtechnik Durch den reduzierten Schaft 10 mm passt der Bohrer auch in Bohrfutter mit begrenzter Spannweite, obwohl der Arbeitsdurchmesser größer ist. Die Norm DIN 338 klassifiziert diesen kurzen Spiralbohrer mit Zylinderschaft und macht ihn zur Standardwahl für Werkstatt und Produktion. Bei härteren Werkstoffen empfiehlt sich der 135° Spitzenwinkel, da er die Anbohrkraft reduziert und die Zentrierung beim Eintauchen verbessert. Sicherheit, Vorschub und Pflegehinweise Für dauerhaft stabile Ergebnisse sind Kühlung und moderater Vorschub entscheidend; die geschliffene Geometrie reagiert empfindlicher auf Verkantung und plötzliche Stoßbelastungen. Regelmäßiges Nachschleifen ist bei intensiver Nutzung möglich, doch sinnvoller ist der Austausch gegen ein neues Teil, um konstante Qualitätsparameter zu halten. Die Reinigung von Spannuten und eine kontrollierte Schmiermittelzufuhr verlängern die Standzeit und sichern reproduzierbare Bohrergebnisse. Empfehlung: Vertrauen Sie auf die Präzision von MetavCUT und wählen Sie diesen Spiralbohrer für anspruchsvolle Metallbearbeitung; bei Fragen erreichen Sie uns per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 63120-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Standard Line Fakten Durchmesser: 12 mm Gesamtlänge: 151 mm Spirallänge: 101 mm Spitzenwinkel: 135° Verpackungseinheit: 1 Besonderheiten Material: HSS-G (geschliffen, hohe Schnittschärfe) Ausführung: geschliffen (CNC-Schliff für präzise Geometrie) Schaftausführung: reduziert 10 mm (passt in kleinere Futter) Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) Farbe: silber Anwendung: Bohrer für Metall FAQ Wie unterscheidet sich ein geschliffener Bohrer von einem rollgewalzten? Ein geschliffener Bohrer wie der MetavCUT Spiralbohrer bietet schärfere Schneiden und höhere Rundlaufgenauigkeit, was in saubereren Bohrlöchern und schnellerer Schnittgeschwindigkeit resultiert. Ist der MetavCUT Spiralbohrer 12 mm für Edelstahl geeignet? Ja, dank des 135° Spitzenwinkels und der HSS-G-Werkstoffauswahl eignet sich der Spiralbohrer 12 mm für härtere Werkstoffe, wobei Kühlung und moderater Vorschub empfohlen werden. Warum ist der reduzierte Schaft 10 mm sinnvoll? Der reduzierte Schaft ermöglicht die Nutzung eines größeren Bohrdurchmessers in Bohrfuttern mit begrenzter Spannweite, wodurch Flexibilität in der Werkstatt erhöht wird. Welche Maschinen sind für diesen Kurzspiralbohrer ideal? Stationäre Säulenbohrmaschinen und gut geführte Werkzeugmaschinen sind ideal, da die geschliffene Geometrie von stabiler Spindelaufnahme und kontrollierter Kühlung profitiert.
12mm NC Spot Drill HSS-Co 120° Right-Hand Cylindrical Shank, h8 Tolerance - TECWERK
With a 12 mm diameter, HSS‑Co construction and a 120° centring tip, this NC centre drill combines precise positioning with chamfering in a single pass to reduce cycle times and increase process reliability. Its DIN 1835‑A cylindrical shank and h8 tolerance ensure secure clamping and repeatable concentricity; order directly via Metav Werkzeuge or consult the team for application guidance. NC centre drill D12 mm – HSS‑Co, 120° tip (TECWERK) The NC centre drill D12 mm is engineered for precise spot drilling and simultaneous chamfering on NC machines and drilling centres, delivering fast and accurate preparation of tapped holes in one operation Cobalt HSS for high wear resistance DIN 1835‑A cylindrical shank 120° tip for accurate centring Feed 0.1 mm/rev in steel up to 800 N Reduce cycle time with precise centring and chamfering This centre drill is optimised for fast, position‑accurate starts on CNC machines and drilling centres. The combination of a 120° tip and a 12 mm diameter provides stable entry and reliable centring before subsequent drilling or tapping. Using the specified 0.1 mm/rev feed in steel up to 800 N yields consistent chip formation and reduces the risk of run‑out, which in turn shortens setup and processing time. The result is measurable throughput improvement without compromising hole quality. Durable material and shank standard for repeatable results Manufactured from HSS‑Co, the tool offers increased red‑hardness and wear resistance compared with standard high‑speed steel, helping to maintain edge geometry across long production runs. The DIN 1835‑A cylindrical shank permits secure clamping in standard tool holders, while a tolerance h8 on the cutting diameter supports consistent concentricity in serial production. These characteristics combine to lower reject rates and extend the interval between tool checks. Easier integration into existing NC workflows With a 30 mm flute length and an overall length of 102 mm, the drill is designed for straightforward handling and tool‑changer compatibility. The right‑hand cutting geometry supports conventional machining directions and predictable chip evacuation, making the tool suitable for automated sequences that require centring and chamfering in a single step. This integration reduces the number of tool changes and simplifies process planning for tapping preparations. Discuss application requirements with Metav Werkzeuge for tailored recommendations on the TECWERK NC centre drill and its suitability for specific machines or materials Technical data Article number: 2000860092NW Brand: TECWERK Product type: NC centre drill Standard: DIN 1835‑A Packaging unit: 1 Facts Diameter: 12 mm Overall length: 102 mm Flute/spiral length: 30 mm Tip angle: 120° Tolerance: h8 Feed in steel up to 800 N: 0.1 mm/rev Special features Material: HSS‑Co (cobalt high‑speed steel) Shank: cylindrical shank to DIN 1835‑A Cutting direction: right‑hand cutting Application: position‑accurate spot drilling on NC machines and drilling centres Function: centring and chamfering of tapped holes in one pass FAQ What machine types is this centre drill compatible with? This NC centre drill from TECWERK is designed for use on NC machines and drilling centres and fits holders compatible with DIN 1835‑A cylindrical shanks. Can the tool perform centring and chamfering in a single operation? Yes. The geometry of the TECWERK NC centre drill combines centring and chamfering so tapped holes can be prepared in one pass. What feed rates are recommended for steel applications? A feed of 0.1 mm/rev in steel up to 800 N is indicated for reliable chip formation and stable machining with this tool. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
12mm NC Spot Drill HSS-Co 90° Right-Hand Cylindrical Shank DIN 1835-A, h8 Tolerance - TECWERK
Take advantage of the combination of HSS‑Co material, a 90° centring geometry and a cylindrical shank to DIN 1835‑A for reliable, repeatable positioning and faster set‑ups on CNC machines — order directly via Metav Werkzeuge or consult our specialists for application advice. NC centre drill D12 mm HSS‑Co 90° — TECWERK A NC centre drill D12 mm HSS‑Co 90° engineered for precise spot‑drilling, rapid centring and chamfering on CNC machines and drilling centres HSS‑Co for high wear resistance Cylindrical shank to DIN 1835‑A 90° tip for exact centring and chamfering Feed in steel up to 800 N: 0.1 mm/rev Precise centring and faster cycle times The spotting tool delivers consistent, position‑accurate starts that reduce wandering and tool deflection in follow‑up operations. Its 90° tip geometry creates a clear centre mark and a small chamfer in one pass, eliminating an extra machining step and shortening cycle times on production runs. For batch work on NC machines, this means fewer repositions and a measurable productivity gain. Durable material and proven geometry for longer life Manufactured from HSS‑Co (cobalt high‑speed steel), the insert material provides higher hot hardness and better wear resistance than standard high‑speed steels. The robust geometry and cobalt alloy extend tool life under interrupted cuts and elevated temperatures, especially when machining tougher materials. That durability translates into reduced tool changes and steadier process quality over time. Machine compatibility and secure clamping The cylindrical shank to DIN 1835‑A ensures secure, standardised seating in machine spindles and holders, improving concentricity and reducing runout. Designed for right‑hand cutting, the tool is suitable for conventional setups on CNC milling machines and drilling centres. The standardised shank also speeds changeovers and keeps set‑up times low in mixed‑tool workshops. Application data and practical recommendations With a 12 mm nominal diameter and an overall length of 102 mm with 30 mm spiral length, the centre drill is optimised for accurate pre‑drilling and chamfering ahead of tapping operations. Recommended feed in steel up to 800 N is 0.1 mm/rev, which balances chip formation and surface finish for clean centring. Where necessary, moderate cutting fluids can help evacuate chips and lower tool temperatures for extended life. For technical application support or to order TECWERK centre drills, contact Metav Werkzeuge — our specialists in precision tools provide bespoke advice and rapid supply from Emmerich: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: 2000860112NW Manufacturer: TECWERK Product type: NC centre drill Specifications Diameter: 12 mm Overall length: 102 mm Spiral length: 30 mm Tip angle: 90° Tolerance diameter: h8 Packaging unit: 1 Feed in steel up to 800 N: 0.1 mm/rev Special features Material: HSS‑Co Shank design: cylindrical shank to DIN 1835‑A Cutting direction: right‑hand cutting Application: position‑accurate spot‑drilling and chamfering on NC machines and drilling centres Suitable for centring and chamfering of tapped holes in one operation FAQ What materials can this centre drill machine reliably? The TECWERK NC centre drill D12 mm HSS‑Co 90° is made from HSS‑Co, which offers suitability for a broad range of steels and tougher materials where increased hot hardness is required. Is the shank compatible with standard toolholders? Yes. The tool features a cylindrical shank to DIN 1835‑A, making it compatible with standard clamping systems used in CNC machines and drilling centres. What is the recommended feed for typical steel applications? For steel up to approximately 800 N cutting resistance the recommended feed is 0.1 mm/rev, balancing hole quality and tool life. Can this tool produce a chamfer as well as the centre? Yes. The 90° tip geometry is designed to provide a clean centre and a small chamfer in a single operation, reducing process steps before tapping. How does the HSS‑Co composition benefit production runs? The cobalt alloy in HSS‑Co increases wear resistance and hot hardness, which helps maintain consistent performance during longer runs and under tougher cutting conditions. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
High-performance drill bits for demanding production
Drill bits designed for industrial manufacturing where precision, repeatability and tool life are decisive. Based on a spectrum from HSS and kobalt-alloyed hss-e for universal use to solid carbide drills for high-speed, high-precision serial production, this range covers applications from general engineering to automotive supplier work.
Why these drill bits are essential in the workshop and on the machining centre
Function and behaviour:
- primary use: creating accurate cylindrical holes
- typical machines: CNC machining centres, lathes and drill presses
- key design aspects: optimised chisel edge, defined point angles, flute geometry for reliable chip evacuation
Technical advantages and process benefits:
- reduced feed forces through optimised point geometry
- improved heat control with advanced coatings and, where specified, internal coolant supply
- extended tool life using solid carbide variants and multilayer coatings such as TiN / TiAlN
- process security on challenging materials thanks to tailored materials and geometries
Concrete benefits that boost productivity and quality
- predictable tool life and fewer tool changes, lowering machine downtime
- stable hole quality and consistent tolerances across long runs
- efficient chip control and thermal management for safe deep-hole and hardened-material drilling
- suitability across a wide material range, reducing the need for multiple specialised tools
Metav as a reliable partner for high-precision tooling
Metav combines decades of sector expertise with a broad, dependable offering from its Emmerich facility. With over 48,000 customers and more than 250,000 products, Metav positions its range of drill bits, twist drills and indexable drills as a practical, quality-first choice for procurement managers and production engineers seeking dependable supply and technical competence.
Technical data (at a glance)
- material: HSS, kobalt-alloyed hss-e, solid carbide
- coatings: TiN, TiAlN, advanced nanocoatings
- coolant option: internal coolant feed where specified
- typical applications: mild steel, high-alloy stainless steel, cast iron, non-ferrous metals, technical plastics, hardened materials (use solid carbide variants)
- tool types available: twist drills, solid carbide drills, indexable drills, centre and pilot drills, step drills
FAQ
What is the difference between hss and solid carbide drill bits?
HSS drill bits offer toughness and resistance to breakage for general machining, while solid carbide drills provide higher wear resistance and are the preferred choice for high-speed, high-volume machining and hardened materials.
Which coatings improve tool life for industrial drilling?
Coatings such as TiN and TiAlN increase surface hardness and thermal stability; when combined with the correct drill geometry and, if available, internal coolant, they significantly extend the service life of drill bits.
Can these drill bits be used on CNC machining centres for deep holes?
Yes. Drill bits designed with optimised flute geometry and internal coolant supply are suited to deep-hole machining on CNC machining centres, ensuring controlled chip evacuation and heat management.
How should I choose between twist drills, solid carbide drills and indexable drills?
Select twist drills for general-purpose drilling, solid carbide drills for high-speed and hardened-material applications, and indexable drills for large-diameter holes where insert changes offer economic advantages.
Why choose Metav for drill bits and drilling solutions?
Metav offers a comprehensive selection of drill bits, twist drills and indexable drills combined with sector expertise, centralised supply from Emmerich and proven reliability across thousands of industrial customers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com