High-precision drills for reliable, high-throughput metalworking
Drills provide the fundamental rotating cutting solution for producing accurate cylindrical holes in materials such as structural steel, high-alloy stainless steel, cast iron, non-ferrous metals and engineering plastics, delivering consistent hole quality and extended tool life in CNC machining and turning centres. This category covers everything from classic twist drill made from high-speed steel for general machining to solid carbide drill optimised for high cutting speeds and long run times, offering advanced coatings and internal coolant options for improved heat management. By using optimised point geometries and split points the tools reduce thrust, prevent walking at the start of the cut and ensure superior surface finish, which benefits sectors from general mechanical engineering to automotive component manufacture.
2.4mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short HSS-G Type N, 2.4 mm, 118° (Bright Finished) A Twist Drill short HSS-G Type N designed for Drilling Machine use, offering precise and stable metal drilling in demanding workshop applications. Short Design: Enhanced Stability and Precision 2.4 mm Diameter for fine, accurate holes 118° Point Angle for improved centring Bright finished surface with fully ground shank DIN 338 compliant for reliable metalworking Precision and Performance for Metalwork The Twist Drill is manufactured from HSS-G, a ground high-speed steel that delivers sharp cutting edges and excellent hole quality in metal. The ground flute geometry provides high Rundlaufgenauigkeit and clean chip evacuation, which translates into faster drilling and reduced rework. According to manufacturer data, the ground HSS construction can enable up to 40% faster drilling and requires about 50% less feed force compared with conventional HSS variants, which benefits productivity in serial and precision tasks. Short Design Reduces Deflection and Increases Accuracy A shorter overall length reduces the overhang from the chuck and thus lowers bending and vibration during cutting. This short execution delivers higher stability and makes the cutter particularly suitable for precise work in harder materials such as alloyed steels and cast metals. The reduced tendency to flex improves positional accuracy and repeatability when creating critical holes on both stationary and portable drilling equipment. Optimised Geometry and Typical Applications The 118° point angle combined with the Type N normal spiral offers a balanced entry and reliable centring behaviour on curved surfaces. The drill is intended primarily for metal applications—including unalloyed and alloyed steel, cast steel, cast iron, sintered iron, tempered castings, non-ferrous metals and hard plastics—where the classic Type N geometry performs best. For users less familiar with drill terminology: Type N denotes the standard spiral geometry commonly used for metal drilling; HSS-G means the flutes and tip are produced by grinding to achieve very sharp edges. Shank, Finish and Standards for Professional Use This short twist drill features a bright finished surface and a fully ground (geschliffen) cylindrical shank, ensuring secure clamping and precise concentricity in the chuck. Compliance with DIN 338 indicates the drill meets defined dimensions and tolerances for short cylindrical-shank twist drills in HSS. For workshop practice, ground drills often require coolant and cautious feed to avoid chipping; they are excellent for stationary machines and high-precision operations. Highly recommend MetavCUT's short HSS-G Twist Drill for precise metal drilling — for technical questions or to confirm suitability for specific materials please contact METAV Werkzeuge: info@metav-werkzeuge.com | Phone: +49 2822 7131930 | WhatsApp: +49 170 2837271 Bezeichnung: Twist Drill Marke/Hersteller: MetavCUT SKU: 48024-FDA Diameter: 2.4 mm Point Angle: 118° Type: Type N Execution: short Colour: bright finished Shank Execution: fully ground Spiral Length: 30 mm Overall Length: 57 mm Material: HSS-G Standard: DIN 338 Application: Drills for metal For Drilling Machine: Drilling Machine Model Series: Profi Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill (short HSS-G Type N) is primarily used for machining high-strength workpieces and larger drilling diameters in metal; its ground form is easier to sharpen and withstands greater loads, making it suitable for alloyed and unalloyed steel, cast materials and hard plastics. Which three drill types exist? Common drill categories are Metal Drills (for steel and similar), Wood Drills, and Masonry/Concrete Drills; the MetavCUT Twist Drill belongs to the metal-drill category and is optimised for those applications.
2.50mm Centre Drill DIN 333 Form A 60° Tip, Solid Carbide Right-Hand Cut - TECWERK
A robust combination of solid carbide construction, precise DIN 333 Form A geometry and a compact shank Ø 6.3 mm delivers dependable centre holes with low runout, supporting consistent follow-up machining. Order the TECWERK centre drill directly via Metav Werkzeuge or request advice from the consultants at Metav if required. Centre drill DIN 333 Form A, 2.5 mm – solid carbide, right‑hand cutting (TECWERK) The Centre drill DIN 333 Form A 2.5 mm is a compact solid‑carbide tool designed to produce standard centre holes and reliable pilot points for subsequent drilling and turning operations across a wide range of materials. Solid carbide (VHM) construction DIN 333 Form A centring geometry 60° countersink for standard centre holes Shank Ø 6.3 mm, overall length 45 mm Precise centring for consistent downstream accuracy The DIN 333 Form A geometry is engineered to create accurate, repeatable centre holes that reduce runout in subsequent machining. The combination of Form A geometry and a 60° countersink produces a clean seating for live centres and pilot drills, thereby reducing wobble and improving concentricity. This leads to fewer rejects and more predictable tool life in follow‑up processes, a rational improvement in process stability for production environments. Durable solid‑carbide build for demanding materials Made from solid carbide (VHM), the tool offers high stiffness and wear resistance compared with high‑speed steel alternatives. This hardness minimises deflection and maintains tip geometry under load, extending service intervals when working with tougher materials such as high‑strength steels and manganese‑hardened alloys. The robust construction pays off through reduced rework and sustained accuracy in repetitive centring tasks. Optimised cutting direction and process data for efficiency The right‑hand cutting orientation is matched to standard spindle rotations, while the specified feed parameter of 0.1 mm/rev in steel up to 800 N gives a practical baseline for machining. The compact shank Ø 6.3 mm ensures compatibility with common collet systems and tool holders, enabling quick tool changes and short cycle times. These process characteristics support a rational improvement in throughput and predictable machining results. Versatility across materials and workshop workflows Suitable for producing centre holes to DIN 332, the bit is applicable to a broad material spectrum: high‑strength steels, steel cast, grey cast iron, hard cast iron, CrNi stainless steels, light and non‑ferrous metals, fibre‑reinforced plastics and other duroplasts. This versatility simplifies inventory and makes the tool a practical choice for mixed‑material workshops. Supplied via Metav Werkzeuge’s Emmerich stock, the product benefits from a reliable supply chain and a quality‑filter approach for the European market. For dependable centring in demanding workshops choose the TECWERK solid carbide centre drill — contact Metav Werkzeuge for ordering and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 2000861992NW Product type: Centre drill Manufacturer: TECWERK Material: Solid carbide (VHM) Standard: DIN 333 Form A Data Diameter: 2.5 mm Overall length: 45 mm Shank diameter: 6.3 mm Countersink angle: 60° Feed in steel up to 800 N: 0.1 mm/rev Special features Right‑hand cutting Without protective countersink For centre holes to DIN 332 Suitable for high‑strength steels, steel cast, grey cast iron, hard cast, manganese‑hardened steel, CrNi steels, light and non‑ferrous metals, fibre‑reinforced plastics and other duroplasts FAQ What is the recommended feed for centring in steel? For centring in steel the tool guideline is 0.1 mm/rev in materials up to 800 N, which balances tool life and surface quality for the TECWERK centre drill. Can the centre drill be used in standard collet chucks? Yes, the shank Ø 6.3 mm is compatible with common collet systems, enabling straightforward integration into standard tool holders. Is this tool suitable for stainless steel and cast materials? The solid‑carbide design is suitable for CrNi stainless steels, steel cast and grey or hard cast iron, offering improved stiffness and wear resistance for these applications. What does Form A refer to and why is it useful? Form A denotes the DIN 333 centring geometry intended to produce a 60° seat for centres and pilot drills, improving concentricity and repeatability in downstream machining. Which SKU identifies this specific centre drill? The TECWERK centre drill in this description is listed under SKU 2000861992NW for ordering and inventory purposes. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
2.50mm Centre Drill DIN 333 Form B With Countersink 60/120° Right-Hand HSS - TECWERK
Benefit from durable HSS construction, DIN 333 Form B accuracy and an integrated protection countersink for dependable centring; order this centre drill directly via Metav Werkzeuge or contact our consultants for tailored advice. Centre drill DIN 333 Form B Ø2.5 mm — HSS centre drill with protection countersink (TECWERK) A Centre drill DIN 333 Form B Ø2.5 mm engineered to create precise starting holes and reliable centring points in general metalworking and production environments. HSS construction for reliable durability DIN 333 Form B for standard centre holes Integrated protection countersink 10 mm shank, 56 mm overall length Precise starts that reduce rework and improve tool life The DIN 333 Form B geometry ensures repeatable centring for subsequent drilling and turning operations, so locating errors are minimised and secondary tool wear is reduced. The dual-angle 60/120° countersink creates a defined conical seat for the drill point, improving concentricity when transferring to twist drills or lathe operations. Specified as compliant with DIN 333, the design offers a familiar standard for procurement and process documentation in production workshops. This standard conformity supports predictable results and simplifies tool selection for quality-focused operations. Durable performance from HSS and a protected tip Manufactured from HSS, the cutting core combines toughness with edge retention for general-purpose metalworking. The version with protection countersink guards the centre point during handling and reduces the risk of tip damage when fitted into chucks or tool holders, lengthening service life and cutting downtime. The tool is right-cutting, optimised for conventional clockwise rotation, and the robust material choice balances cost-efficiency with reliable wear behaviour under typical workshop feeds and speeds. Simple integration with existing toolholders and workflows Built with a 10 mm shank and 56 mm overall length, the drill fits standard collets and chucks used across workshop benches and machine tools, enabling quick changeover without additional adaptors. The compact dimensions are advantageous for confined setups and allow consistent alignment in tailstock and fixture applications. A clearly stated feed recommendation — 0.03 mm/rev in steel up to 800 N — provides an initial process parameter that helps to set up machines faster and avoid trial-and-error adjustments, supporting uninterrupted production flow. Practical uses and operation advice for reliable results Intended chiefly for the production of centre holes according to DIN 332 sheet 1 Form B, this centre drill is suitable for routine centring tasks in small-batch fabrication, maintenance workshops and serial production where repeatability matters. The integrated countersink reduces burr formation and provides a clean seat for a subsequent drill, lowering the need for secondary deburring. For best results, ensure proper clamping and axial alignment; the specified geometry helps to guide subsequent drills and improves overall hole quality in downstream operations. Choose the TECWERK centre drill for standardised, durable centring — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for technical guidance and reliable supply Technical data Article number: 2000861632NW Product type: Centre drill Brand: TECWERK Material: HSS Standard: DIN 333 Form: B Execution: with protection countersink Cutting direction: right-cutting Core specifications Diameter: 2.50 mm Overall length: 56 mm Shank diameter: 10 mm Countersink angle: 60/120° Feed in steel up to 800 N: 0.03 mm/rev Packaging unit: 5 Special features Designed for making centre holes to DIN 332 sheet 1 Form B Protection countersink to safeguard the tip Standard shank for easy integration Suitability: general metalworking centring tasks FAQ What is the intended use of this centre drill? The TECWERK centre drill is designed to produce accurate centring holes and conical seats for starting drills, complying with the DIN 332 sheet 1 Form B specification. Which materials is the centre drill suitable for? The centre drill, made of HSS, is intended for general metalworking; the specified feed parameter of 0.03 mm/rev applies to steel up to 800 N. How is the tool held in the machine? The 10 mm shank allows mounting in standard chucks and collets typically used on bench drills and lathes. What is the advantage of the protection countersink? The integrated protection countersink protects the centre point from damage during handling and reduces burrs at the hole entry, improving tool life and downstream hole quality. Are there recommended cutting parameters? A recommended starting feed for steel up to 800 N is 0.03 mm/rev; adjust speeds and feeds according to machine rigidity and material specifics. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
2.5mm Centre Drill DIN 333 Form A 60° HSS Left-Hand Cutting - TECWERK
Take advantage of a combination of practical geometry and robust material for consistent centre drilling performance: the HSS construction and 60° countersink geometry deliver reliable centre holes with controlled feed, reducing rework and downtime. Order the item directly via Metav Werkzeuge or consult our specialists for tailored advice. TECWERK centre drill DIN 333 Form A, 2.5 mm HSS — left-hand cutting, 60° TECWERK centre drill DIN 333 Form A, 2.5 mm HSS for producing accurate centre holes and pilot countersinks in general workshop and industrial settings HSS construction for reliable wear resistance DIN 333 Form A geometry, 60° countersink Left-hand cutting for reverse-thread or removal tasks 45 mm overall length for standard drilling setups Precision geometry for dependable centre holes The combination of DIN 333 Form A geometry and a 60° countersink is engineered to produce accurate centre holes that conform to established workshop standards. Thanks to the hardened HSS cutting edges and the defined tip form, holes are centred precisely with minimal runout, which simplifies subsequent turning or drilling operations. The specified feed of 0.03 mm/rev (in steel up to 800 N) supports controlled material removal and consistent hole quality, translating into measurable savings through fewer rejects and faster set-ups. Robust material and cutting direction for reliable machining Constructed from high-speed steel (HSS), the tool combines toughness with heat resistance for extended tool life in intermittent centre-drilling tasks. The left-hand cutting geometry is particularly useful for specific machining sequences such as removing damaged screws or when reverse cutting is required; it also offers a practical option where spindle rotation or fixture layout demands non-standard cutting direction. With a nominal diameter of 2.5 mm and an overall length of 45 mm, the tool fits standard centre-drilling fixtures while keeping stiffness and accessibility in balance. Practical compatibility and process benefits in the workshop Designed to create centre bores in accordance with DIN 332 without a protective countersink, the tool suits a wide range of general applications and simplifies preparatory operations before turning or drilling. The straightforward geometry reduces set-up time and supports predictable wear behaviour, which benefits production planning and tool management. For complex material mixes or specific machine states, the technical specifications — including HSS construction, DIN 333 compliance and the recommended feed — allow clear selection criteria for purchasing and inventory decisions. For further clarification on integration into existing workflows, Metav’s team can provide detailed guidance based on shop-floor requirements. Contact Metav Werkzeuge to secure TECWERK centre drills for immediate delivery from Emmerich, or speak with our consultants for application-specific recommendations and procurement support Technical data Article number: 2000861572NW Product: Centre drill DIN 333 Form A, 2.5 mm, HSS Brand: TECWERK Facts Nominal diameter: 2.5 mm Overall length: 45 mm Countersink angle: 60° Feed in steel up to 800 N: 0.03 mm/rev Cutting direction: Left-hand Special features Material: HSS Geometry: DIN 333 Form A Application: Centre drilling to DIN 332 without protective countersink Use: General workshop and industrial centre-drilling tasks FAQ What materials is this centre drill suitable for? The TECWERK centre drill is made from HSS and is intended for general workshop use; it performs well in common steels and standard workshop materials as indicated by the feed guideline. What does left-hand cutting mean for machining? Left-hand cutting indicates the cutting edges are arranged for reverse rotational direction, useful for specific processes such as screw removal or operations that require reverse cutting motion. Is the tool compatible with standard centre-drilling fixtures? Yes, the 2.5 mm nominal diameter and 45 mm overall length make the tool compatible with standard fixtures used for centre drilling and pilot operations. Can this drill produce centre bores according to DIN 332? The tool’s DIN 333 Form A geometry and 60° countersink are specified for producing centre bores in line with DIN 332 without an additional protective countersink. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
2.5mm Centre Drill DIN 333 Form A 60° HSS-Co, Right-Hand Cutting - TECWERK
Combining HSS‑Co durability with a precise 60° countersink and a compact Ø 2.5 mm tip delivers dependable centre holes even in high‑strength and CrNi steels; order the TECWERK centre drill directly via Metav Werkzeuge or contact our consultants for specification advice. TECWERK centre drill DIN 333 Form A, HSS‑Co, Ø 2.5 mm A TECWERK centre drill DIN 333 Form A for accurate centring and reliable pilot holes in demanding workshop and production environments. HSS-Co high-speed steel DIN 333 Form A centre drill 60° countersink angle for precise centring For >800 N/mm² and CrNi steels Precision where strength matters The combination of HSS‑Co construction and the DIN 333 Form A geometry ensures consistent centring performance in tough materials. The tool is intended for producing centre holes to DIN 332 without protective countersink, which reduces set‑up variance and improves repeatability. With a nominal tip of Ø 2.5 mm and a total length of 45 mm, the design balances rigidity and access for typical lathe and drilling‑machine set‑ups, making it suited for series production as well as repair tasks. Design features that simplify machining The integral shank with Shank Ø 6.3 mm and the right‑hand cutting geometry support secure clamping and conventional spindle rotation, while the 60° countersink angle creates a defined entry for subsequent drills or centres. The absence of a protective countersink reduces tool overhang and helps maintain concentricity; this simplified form lowers the risk of chatter and makes clamping checks straightforward, improving process stability on small to medium batches. Productivity data and recommended operation For machining in steel up to 800 N, a recommended feed of 0.03 mm/rev is given, delivering controlled chip formation and consistent hole geometry. The tool is specified for materials with tensile strength above 800 N/mm² and for corrosion‑, acid‑ and heat‑resistant CrNi steels; this capability translates into fewer tool changes and a steadier production flow. The compact overall length and proven geometry reduce rework, supporting lean workflows in metalworking shops and subcontracting environments. Order TECWERK centre drills through Metav Werkzeuge in Emmerich for dependable supply and technical guidance; Metav Werkzeuge can advise on tool selection and compatibility with existing holders Technical data Article number: 2000861581NW Product type: centre drill Manufacturer: TECWERK Standard: DIN 333 Form: A Packaging unit: 5 Key measurements Tip diameter: 2.50 mm Overall length: 45 mm Shank diameter: 6.3 mm Countersink angle: 60° Feed in steel ≤800 N: 0.03 mm/rev Cutting direction: right-hand Design and material properties Material: HSS‑Co Execution: without protective countersink Application: for centre holes to DIN 332 Suitable for materials >800 N/mm² Suitable for corrosion-, acid- and heat-resistant CrNi steels FAQ What materials can this centre drill machine? The TECWERK centre drill is designed for materials with tensile strength above 800 N/mm² and for corrosion-, acid- and heat‑resistant CrNi steels; its HSS‑Co composition supports these applications. Which standards and form does the tool comply with? The tool is manufactured to DIN 333 in Form A and is intended for producing centre holes in accordance with DIN 332 without a protective countersink. What are the key dimensions and clamping requirements? Tip Ø 2.5 mm, overall length 45 mm and shank Ø 6.3 mm; the shank diameter suits common 6.3 mm holders and collets used in workshop drills and lathes. What operating data is recommended for steel? A guide feed of 0.03 mm/rev is specified for steel up to 800 N, with conventional right‑hand cutting direction to ensure stable chip evacuation and hole form. How is the product supplied and what is the SKU? Supplied in packaging units of 5; SKU: 2000861581NW. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
2.5mm Centre Drill DIN 333 Form A 60° TiN Coated HSS, Right-Hand - TECWERK
Combining HSS core construction with a durable TiN coating delivers longer tool life and consistent cutting performance; the DIN 333 Form A geometry with a 60° countersink ensures precise centre holes. Order the TECWERK centre drill directly via Metav Werkzeuge or ask our consultants if needed. TECWERK centre drill DIN 333 Form A — HSS, TiN, 2.5 mm, right‑hand The TECWERK centre drill DIN 333 Form A 2.5 mm is a short, rigid starter tool designed to create accurate centre holes for subsequent drilling and turning processes in general workshop and production environments. HSS body with TiN coating Conforms to DIN 333 Form A 60° countersink angle for standard centres Pack of 5 for regular replenishment Precision starter holes for reliable machining The centre drill is engineered to produce consistent centre holes that guide larger drills or lathes, reducing runout and chatter. Built to DIN 333, the geometry of the short pilot and larger countersink creates a clean, concentric entry that simplifies subsequent operations. The nominal diameter 2.5 mm and the compact overall length are aimed at rigid positioning rather than deep drilling; this minimises deflection and contributes directly to improved hole accuracy and repeatability on turned or milled components. Durable coating and material for extended service life Manufactured from HSS and finished with a TiN coating, the tool offers a balance between toughness and wear resistance. The coating reduces friction and improves heat resistance at the cutting edge, which extends lifetime in cyclic production use. With a right‑hand cutting direction and a recommended feed of 0.03 mm per revolution in steels up to 800 N, the geometry and surface treatment work together to lower tool changes and increase throughput, providing a measurable gain in process efficiency for busy workshops. Designed for smooth workshop integration The tool is suitable for routine centre‑drilling tasks where standard conformity matters: the 60° countersink matches the common requirements for centre holes per DIN 332 without needing an additional pilot countersink. Supplied in a practical pack of five items, the set aids inventory management and keeps setups efficient on the shop floor. For those implementing or standardising tooling, the short, stiff design reduces re‑clamping and rework, promoting predictable cycle times and consistent outcomes across multiple machines. Contact Metav Werkzeuge for tailored advice on tooling choices and specify the TECWERK centre drill for consistent centre hole performance — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific applications Technical Data Article number: 2000861590NW Manufacturer: TECWERK Product type: Centre drill Standard: DIN 333 Form: A Coating: TiN Material: HSS Facts Nominal diameter: 2.5 mm Overall length: 45 mm Countersink angle: 60° Recommended feed in steel (≤800 N): 0.03 mm/rev Pack quantity: 5 Special features Right‑hand cutting For producing centre holes to DIN 332 without pilot countersink General workshop and production use TiN coating for reduced friction and increased wear resistance FAQ What materials is this centre drill suitable for? The TECWERK centre drill (DIN 333 Form A, 2.5 mm) is intended for general use in conventional workshop materials; the HSS substrate with TiN coating provides enhanced wear resistance for typical steel and general metal applications. How does the 60° countersink relate to standards? A 60° countersink corresponds to the standard centre geometry used for producing centres to DIN 332; the DIN 333 Form A tool creates the correct profile for most turning and centre‑drilling requirements. What feed rate is recommended for this tool in steel? For steels up to the specified strength (approx. 800 N), the recommended feed is 0.03 mm per revolution, which balances cutting stability and surface quality for the short‑length geometry. Is this centre drill suitable for precision setups on lathes? Yes; the compact, rigid design of the DIN 333 Form A centre drill supports accurate pilot hole positioning and reduced runout, making it appropriate for precision lathe and mill set‑ups. What is included in the packaging? The product is supplied as a pack of five identical centre drills (pack quantity 5), allowing immediate replacement and straightforward stock planning for workshop use. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
2.5mm Centre Drill DIN 333 Form A Extra Long 60° Point HSS-Co, Right-Hand - TECWERK
The combination of HSS‑Co construction, a 60° centring geometry and the extra‑long 120 mm design ensures reliable and repeatable centring even in deep set‑ups; order the TECWERK centre drill directly via Metav Werkzeuge or consult our product specialists for application advice. TECWERK centre drill DIN 333 Form A – Ø 2.5 mm, HSS‑Co, extra‑long The TECWERK centre drill (DIN 333 Form A, Ø 2.5 mm) is a precision tool for producing centring holes to DIN 332, designed for general-purpose workshop and production use where deeper centring is required. HSS‑Co for higher wear resistance Extra‑long overall length: 120 mm 60° centring angle, compliant with DIN 332 Right‑hand cutting for standard lathe and drilling use Accurate centring that reduces rework and scrap The carefully ground 60° tip geometry conforms to the DIN 332 requirement and delivers a consistently centred start for subsequent drilling or turning operations. By creating a precise pilot seat, the centre drill significantly reduces the risk of off‑centre holes and the need for secondary alignment work. The carbide‑reinforced high‑speed construction ensures sustained accuracy across a production run, translating into fewer rejects and a smoother process chain for batch and single‑piece manufacturing. Durable alloy construction for demanding conditions Manufactured from HSS‑Co, the tool is engineered to resist heat and abrasion better than plain high‑speed steel, extending tool life where elevated cutting temperatures occur. The right‑hand cutting geometry provides stable chip evacuation in conventional machine directions, while the over‑long 120 mm overall length facilitates centring in recessed or long‑flanged components without compromising accessibility. This combination supports longer tool life and lower tooling cost per part in repetitive operations. Reliable process parameters and machine compatibility The centring tool is optimised for general application and offers a recommended feed in steel up to 800 N of 0.03 mm/rev, providing a practical balance between cycle time and surface integrity. The 8 mm shank diameter suits standard drill chucks and collet systems commonly found in machine shops, ensuring straightforward integration into existing tooling setups. These measurable data points allow process planners to predict cycle times and machining behaviour with confidence. Practical handling and workshop benefits The tool's extra length must be clamped securely to avoid deflection during operation; when mounted correctly, the design ensures access to deep centres while maintaining stiffness. As a general‑purpose centring solution, it simplifies inventory by covering a broad range of centring tasks without specialist variants. The robust alloy and standardised geometry make the tool a dependable choice for maintenance departments, toolrooms and production lines seeking reproducible centring performance. Specify TECWERK centre drills through Metav Werkzeuge for assured centring quality; Metav Werkzeuge’s specialists can advise on suitability and ordering to match production requirements Technical Data SKU: 2000861979NW Product type: centre drill Standard: DIN 333 Form A Material: HSS‑Co Execution: extra‑long version; without protective countersink Facts Diameter: 2.50 mm Overall length: 120 mm Shank diameter: 8 mm Countersink/centring angle: 60° Feed in steel up to 800 N: 0.03 mm/rev Special features Right‑hand cutting For producing centre holes to DIN 332 without protective countersink General‑purpose application Over‑long build for deep centring tasks FAQ What angle does the centre drill use for centring? The TECWERK centre drill uses a 60° centring angle in accordance with the DIN 332 specification for reliable pilot seating. Which material is the tool made from? The tool is manufactured from HSS‑Co, a cobalt‑alloyed high‑speed steel designed for improved heat and wear resistance in repetitive centring operations. What is the overall length and why is it useful? With an overall length of 120 mm, the extra‑long design allows centring in recessed or hard‑to‑reach areas where standard lengths would not reach. What feed rate is recommended for steel? For steel up to approx. 800 N, a feed of 0.03 mm/rev is indicated for consistent centring results and controlled chip formation. Which machines and toolholders are compatible with the shank? The 8 mm shank fits standard chucks and collet holders used in many drill presses, lathes and machining centres, facilitating quick integration. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
2.5mm Centre Drill DIN 333 Form R 60° Right-Hand HSS Without Countersink - TECWERK
Reliable centre-hole performance results from the combination of HSS construction and a precise 60° countersink in DIN 333 Form R; robust shank sizing and right-hand cutting ensure consistent seating for subsequent turning or drilling operations. Order the TECWERK centre drill directly via Metav Werkzeuge or consult our advisors for application support. TECWERK centre drill DIN 333 Form R – HSS, 2.50 mm, 60° A TECWERK centre drill DIN 333 Form R designed to produce accurate, radiused centre bores for general metalworking and preparatory spotting operations High-speed steel (HSS) for extended tool life DIN 333 Form R with radius for secure centring 60° countersink angle for standard centre holes 6.3 mm shank for common collet and chuck systems Accurate centring for reliable machining starts The main benefit of a dedicated centre drill is repeatable, concentric pilot holes that prevent runout on subsequent operations. Constructed from HSS, this tool offers a balance of toughness and hardness suitable for routine workshop use. The DIN 333 Form R profile incorporates a small radius at the tip, producing a robust centre bore that aligns workpieces securely for turning or drilling. The included 60° countersink complies with common centre specifications, ensuring compatibility with standard live and dead centres. These features translate into reduced rework and steadier spindle behaviour during finishing passes. Built for predictable feeds and compatibility Engineered for straightforward integration into production workflows, the tool features a 2.50 mm diameter cutting tip, an overall length of 45 mm, and a 6.3 mm shank, which suits many collets and small chucks. The cutter is right-hand cutting and intended for general use without a protective countersink, simplifying handling and tool change. For machining mild to medium steels, a recommended feed is 0.03 mm/rev up to the stated material resistance, which provides a reliable compromise between cutting force and tool life. These measurable parameters enable process planners to set feeds and speeds with confidence, reducing trial-and-error at the machine. Practical workshop guidance and typical applications This centre drill is intended primarily for preparatory centring in metalworking: producing centre bores per DIN 332 Sheet 1 Form R, initiating accurate turning set-ups, and creating starter holes for subsequent drills. Supplied in practical sets, the tool allows efficient replacement and keeps tooling inventories straightforward. Its combination of HSS material, standardised geometry and compact dimensions makes it suitable for trade workshops, maintenance departments and light production environments where precision and repeatability are required. For customers seeking consistent results across batches, the design minimises wobble and helps maintain concentricity throughout multi-stage processes. For reliable centre drilling and workshop-ready precision, choose the TECWERK centre drill and contact Metav Werkzeuge for stock availability and tailored application advice – Metav Werkzeuge is ready to support from Emmerich with practical, industry‑tested guidance Technical data Article number: 2000861952NW Brand: TECWERK Product type: Centre drill Facts Diameter: 2.50 mm Overall length: 45 mm Shank diameter: 6.3 mm Countersink angle: 60° Feed in steel (up to 800 N): 0.03 mm/rev Packaging unit: 5 Special features Material: HSS Standard: DIN 333 Form R (with radius) Designed for centre holes per DIN 332 Sheet 1 Form R Right-hand cutting Supplied without protective countersink FAQ What is the intended use of this centre drill? The TECWERK centre drill is intended for producing precise centre bores and starter holes for turning and drilling, conforming to DIN 332 Sheet 1 Form R. Which materials can be machined with this tool? This HSS centre drill is suitable for general metalworking; the specified feed rate of 0.03 mm/rev applies for steels within the stated resistance range. How does the DIN 333 Form R geometry affect performance? Form R includes a small radius at the tip that increases contact stability, so the centre bore resists deformation and improves concentricity when mounting between centres. What machine interfaces are compatible with the shank size? The 6.3 mm shank fits common small-collet systems and chucks used in workshop lathes and drill presses, allowing straightforward mounting and accurate rotation. Is a protective countersink included? This design is supplied without a protective countersink; it is configured for direct centring tasks where a radiused tip is required. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
2.5mm Centre Drill Form A 60° HSS, Right-Hand Cutting, DIN 333 - TECWERK
Taking advantage of HSS construction, DIN 333 Form A geometry and a 60° tip leads to stable and repeatable centre-hole results in production and repair shops; the compact Ø 2.5 mm size and 45 mm overall length keep setup times low while the pack of 5 ensures quick replacement. Order via Metav Werkzeuge or consult our specialists for application advice. Centre drill DIN 333 Form A Ø 2.5 mm HSS, 60° — TECWERK The Centre drill DIN 333 Form A Ø 2.5 mm HSS is a precision centre-drilling bit for creating standard centre holes to DIN 332 in general workshop and industrial applications. High-speed steel construction DIN 333 Form A geometry 60° tip for standard centre holes Suitable for general workshop use Precision and consistent centring for reliable downstream drilling Made from HSS, the tool delivers a hard-wearing cutting edge that balances toughness with edge retention, so thread and drill starts remain consistent across repeated operations. The DIN 333 Form A profile combined with a 60° tip angle produces the correct seat for subsequent drilling and turning operations, reducing run-out and rework. With a nominal diameter of 2.5 mm and an overall length of 45 mm, the tool fits standard toolholders and offers controlled chip evacuation. Recommended feed when machining steel up to 800 N is 0.03 mm/rev, which supports stable entry without excessive forces and helps maintain tool life. Designed for routine workshop use with clear technical advantages The geometry is optimised for general-purpose centre drilling: the form ensures the hole meets the tolerances required by DIN 332 without a protective countersink, making the tool suitable for preparatory centring before larger drills or lathe turning operations. The right-hand cutting direction promotes predictable chip flow on most bench and machine setups. Supplied in a pack of 5, the set-up frequency is reduced and replacement is straightforward, limiting machine downtime. The compact design and standardised dimensions simplify inventory control for maintenance teams and small-batch production. Practical benefits for procurement and everyday handling Because the tool adheres to established standards and utilises HSS construction, purchasing and process planning become more predictable: the tool’s specification aligns with common workshop practices and supports reliable supply chains. The short overall length and small diameter reduce the risk of deflection in normal centring tasks, while the documented tip angle assists process engineers when specifying entry parameters. The combination of standard conformity and robust material choice contributes to long-term consistency in hole quality, lowering scrap rates and supporting cost-efficient operations. For dependable centre-drilling performance from TECWERK, contact Metav Werkzeuge for fast supply and practical application guidance — eMail info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 2000861806NW Designation: Centre drill DIN 333 Form A Ø 2.5 mm HSS TECWERK Standard: DIN 333 Form: A Facts Tip angle: 60° Overall length: 45 mm Nominal diameter: 2.5 mm Feed in steel ≤ 800 N: 0.03 mm/rev Pack size: 5 Cutting direction: Right-hand Special features Material: HSS For producing centre holes to DIN 332 without protective countersink General workshop and industrial use DIN 333 Form A geometry FAQ What is the recommended feed for steel when using this centre drill? The recommended feed for machining steel up to 800 N with this centre drill is 0.03 mm per revolution, ensuring a controlled entry and stable centring. Is this centre drill suitable for preparing holes before larger drills or lathe turning? Yes, the TECWERK centre drill DIN 333 Form A Ø 2.5 mm HSS is intended for creating accurate centre holes that serve as a stable pilot for subsequent drilling or turning operations. How is the tool supplied and how does that help workshops? The tool is supplied in a pack of 5, which simplifies replacement and reduces downtime in routine shop-floor operations. Does the geometry conform to industry standards? The geometry complies with DIN 333 and is intended to produce centre holes in accordance with DIN 332, ensuring compatibility with standard machining workflows. What is the cutting direction and why is it relevant? The cutting direction is right-hand cutting; this promotes predictable chip flow and is compatible with common machine spindle rotations. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
2.5mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, 2.5 mm, 118° tip, HSS, short, Black, DIN 338 (MetavCUT) The Twist Drill Type N for drilling metal offers precise pilot-hole performance in drilling machines and hand drills, with a short design and HSS material for stability and durability. Short design increases drilling stability High-Speed Steel (HSS) suited for metal work 2.5 mm diameter for accurate pilot holes 118° tip improves centring on curved surfaces Precision and stability for demanding metal work A short, roll-formed Twist Drill delivers reduced overhang and significantly less bending during operation, which results in greater accuracy when producing pilot holes. The compact geometry means the tip remains concentric with the spindle even under load, lowering the risk of runout and improving hole quality. This construction is particularly valuable when working on components requiring tight tolerances, where consistent alignment and repeatable results are essential. Durable HSS material and industrial standard conformity Made from HSS (High Speed Steel) and manufactured to DIN 338, this short twist drill combines wear resistance with toughness for standard metalworking tasks. HSS provides a balance between hardness and elasticity, reducing breakage risk in diameters below 6 mm and enabling effective machining of alloyed and unalloyed steel, cast iron, non-ferrous metals and plastics. Compliance with DIN 338 guarantees consistent dimensions and performance suited to both stationary and portable drilling equipment. Optimised geometry for reliable centring and chip evacuation The 118° point angle and Type N spiral form (normal twist) support controlled entry and moderate cutting forces, helping to centre the drill on slightly curved or uneven surfaces. The short spiral length and classic flute geometry aid chip evacuation in metal drilling, reducing heat buildup and improving tool life. For tasks where precise pilot holes are required before reaming or tapping, this geometry offers an effective compromise between fast penetration and stable guidance. Who benefits and typical applications Engineers, maintenance technicians and metalworkers who require reliable pilot drilling will value the combination of Type N geometry and short overall length. The bit is intended primarily for metal applications and is compatible with standard chuck-mounted drilling machines and many hand drills, making it suitable for workshop and on-site operations. MetavCUT designed this component for repeatable, everyday use where ease of regrinding and consistent performance matter. Choose MetavCUT’s Twist Drill for precision metal drilling and consult METAV Werkzeuge’s experts for tailored advice — Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40025-FDA Diameter: 2.5 mm Spiral length: 30 mm Overall length: 57 mm Point angle: 118° Type: Type N Execution: short Material: HSS Norm: DIN 338 Colour: black Application: Drills for metal For: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill, a Type N metal drill, is primarily used for machining metals and is effective on alloyed and unalloyed steel, cast iron, non-ferrous metals and plastics; its short design and HSS material improve stability and reduce breakage risk in small diameters. Which three drill types are commonly distinguished? Commonly, drills are classified as metal drills, wood drills and masonry/concrete drills — the MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking tasks.
2.5mm HSS-G Body Drill ,double sided, black finished without margin - MetavCUT
Body Drill (Karosseriebohrer) — 2.5 mm, 135° Tip, Double-sided, Black Finished, HSS‑G The Body Drill (Karosseriebohrer) is a double-sided Twist Drill for Drilling Machines, designed for precise metalworking with a 2.5 mm diameter and a 135° tip angle. Double-sided design: two usable cutting ends 2.5 mm diameter for precise metal holes 135° tip angle for harder and alloyed steels HSS‑G fully ground for high precision 43 mm overall length with 10 mm flute Faster, more accurate metal drilling for demanding jobs The MetavCUT Body Drill delivers a clear performance advantage when machining metals. Thanks to the HSS‑G (fully ground High Speed Steel) construction, the twist drill offers very sharp cutting edges and improved runout accuracy, which produces cleaner bores. For users working with alloyed and unalloyed steels or cast iron, the 135° tip angle reduces wandering on hard surfaces and shortens initial penetration time, so drilling proceeds more reliably with less rework. Double‑ended design reduces downtime and tool changes A major practical benefit of this double‑sided twist drill is its two usable cutting ends, effectively giving two functional drill tips in one tool. This design is especially useful in workshops where rapid tool swaps interrupt workflow: when one end becomes blunt, reversing the bit restores cutting performance immediately. The compact, robust geometry typical of body drills makes them well suited for thin sheet and bonnet‑type holes found in bodywork and thin‑metal assemblies. Clear recommendation for specific applications and users This twist drill is tailored for professionals and advanced hobbyists who require precision in metalworking. It is particularly recommended for tasks in automotive bodywork, sheet metal fabrication and maintenance where small diameter, high‑accuracy holes are needed. Users targeting holes up to 2.5 mm and working with materials such as temper cast steels, sintered iron or hard plastics will benefit from the reduced feed force and improved centring provided by the chosen geometry. Usage tips to maximise life and hole quality To achieve best results with this HSS‑G Body Drill, use moderate cutting speeds and suitable coolant or lubrication when machining hard or alloyed steels; the ground geometry offers high edge sharpness but can be more brittle than rolled types. The fully ground shank ensures stable clamping and accurate concentricity in chucks, while the 10 mm flute length supports efficient chip evacuation for the 43 mm overall tool length. For stationary drilling or applications with cooling, this bit is especially effective. Strong recommendation: Choose the MetavCUT HSS‑G Body Drill for precise, reliable metal drilling and contact METAV Werkzeuge for expert technical advice via email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or on WhatsApp at +49 170 2837271 Technical data Designation: Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 59025-FDA Diameter: 2.5 mm Tip angle: 135° Execution: double sided Colour: black finished without margin Suitable for: Drilling Machine Spiral (flute) length: 10 mm Shank execution: fully ground Model series: Profi Line Application: Drills for metal Overall length: 43 mm Material: HSS-G Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can I drill with the Body Drill from MetavCUT, and when is it most effective? The MetavCUT Body Drill (a Twist Drill) is particularly effective for alloyed and unalloyed steels, cast steel, cast iron, sintered iron, tempered castings, non‑ferrous metals and hard plastics. Its HSS‑G ground geometry and 135° tip make it suitable for harder workpieces where precise centring and clean hole edges are required. Is the double‑sided design of the MetavCUT Body Drill suitable for workshop use? Yes, the double‑sided Body Drill by MetavCUT is ideal for workshop situations: as a double‑ended Twist Drill it provides two cutting tips in one tool, allowing quick reversal when one end dulls and reducing downtime; nevertheless, for high‑speed or very abrasive operations a stationary setup with cooling is recommended. What are Twist Drills used for? A Twist Drill, such as the MetavCUT Body Drill, is mainly used for machining high‑strength materials and larger drill diameters. This form is easy to grind and withstands greater loads, making it a common choice for demanding metalworking tasks. Which three drill types exist? The three common drill types are metal drills, wood drills and masonry/concrete drills, with the MetavCUT Body Drill belonging to the metal drill category.
2.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill – Extra‑Long HSS‑G 2.5 mm, 135° (Bright Finished, Fully Ground, DIN 1869) by MetavCUT A Twist Drill in Extra‑Long execution designed for deep metal drilling with Drilling Machines and demanding workshop applications. Extra‑long design for deep boreholes 2.5 mm Diameter for precise pilot holes 135° Tip Angle for harder materials Fully Ground Shank for high concentricity Conforms to DIN 1869 for industrial use Faster metal machining with hardened HSS‑G for professionals The HSS‑G material and CNC grinding deliver a markedly sharper cutting geometry that enables up to 40% faster drilling with 50% less feed force compared to conventional HSS bits. This means less operator fatigue and higher throughput in serial production. The combination of HSS‑G and a ground flute geometry also produces cleaner holes in alloyed and unalloyed steels, reducing rework and saving machining time. Reach deeper, work cleaner — ideal for tight or hard‑to‑access spots Designed as an Extra‑Long bit (Total Length 140 mm, Spiral Length 95 mm), this drill lets users tackle deep or hard‑to‑reach bores without extensions. The extended working length reduces the need for additional tooling and ensures a straighter approach in recessed positions. For projects where accessibility is the limit, the longer flute and bright finished surface ease chip evacuation and visual alignment. Precision and stability for demanding materials The Fully Ground shank and precision flute grind result in excellent runout and centring, producing accurately sized holes and better surface quality. With a 135° tip angle, the geometry is optimised for harder workpiece materials such as stainless and tempered steels, shortening plunge time and improving control during initial entry. This characteristic makes the bit particularly suited to workshop environments using Drilling Machines where repeatability matters. Usage advice to maximise lifetime and hole quality For durable performance, use the drill with appropriate coolant and avoid excessive side loads; the ground design is precise but can be more brittle than rolled alternatives. Regrinding is straightforward due to the clear flank geometry, but for best results regrind at a specialist to preserve cutting angles. The product is primarily intended for metalworking tasks including casting, sintered metals, and hard plastics, delivering reliable results when used in stationary drilling setups. I recommend the MetavCUT Extra‑Long Twist Drill for precise, deep metal drilling — for personalised advice or supplementary technical data contact METAV Werkzeuge: info@metav-werkzeuge.com, Phone +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 32025-FDA Diameter: 2.5 mm Total Length: 140 mm Spiral Length: 95 mm Tip Angle: 135° Execution: Extra long Shank Finish: Fully Ground Colour / Surface: Bright Finished Material: HSS‑G Standard: DIN 1869 Suitable For: Drilling Machine (Handheld use only with caution) Model Series: Standard Line Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill suitable for? The MetavCUT Twist Drill in HSS‑G is designed for demanding metalworking: it works well in alloyed and unalloyed Steel, Cast Steel, Grey Cast Iron, Sintered Iron, Tempered Castings, Non‑Ferrous Metals and Hard Plastics, providing clean, precise holes when used with appropriate machining parameters. Can the MetavCUT Twist Drill be used in a handheld drill? The MetavCUT Twist Drill is primarily intended for use in a Drilling Machine for best concentricity and cooling; handheld use is possible for light tasks but shorter drills or stationary setups are recommended to avoid breakage due to the ground geometry. For what is a Twist Drill used? A Twist Drill is mainly applied to the machining of high‑strength materials and large drill diameters; its shape allows easy sharpening and it sustains greater loads, making it suitable for demanding metalwork and deep holes. Which three drill types exist? The three main drill types are Metal Drill (Metalbrörer), Wood Drill, and Stone/Concrete Drill. Why are Twist Drills pointed (split point)? Pointing reduces the chisel edge at the tip of the Twist Drill, significantly lowering friction and the required feed force while improving centre‑tracking in the workpiece. Can a metal Twist Drill be used to drill wood? A metal Twist Drill can be used in wood but guidance is poorer and results are less clean; however, such drills are easier to resharpen and have a lower self‑feeding tendency.
2.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Der extra lange HSS‑G Spiralbohrer kombiniert Geschliffene Qualität mit einer Tieflochspirale nach DIN 1869 und ermöglicht schnelleres Bohren bei deutlich geringerer Anpresskraft; ideal für tiefe Bohrungen in Stahl und Guss. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT (Standard Line) Spiralbohrer extra lang für präzise Tiefbohrungen in Stahl und Guss Spiralbohrer extra lang für tiefe Bohrungen HSS‑G geschliffen für hohe Rundlaufgenauigkeit Spitzenwinkel 135° für härtere Werkstoffe Gesamtlänge 180 mm, Spirallänge 120 mm Geeignet für Handbohrmaschinen und Werkstatt Präzision und Effizienz bei Metallbohrungen Der HSS‑G Werkstoff und die geschliffene Schaftgeometrie sorgen für eine sehr scharfe Schneide und hohe Rundlaufgenauigkeit, was saubere Bohrlöcher und geringeren Nachbearbeitungsaufwand bedeutet. Durch den CNC‑Schliff wird das Werkstück schneller durchdrungen: Die Konstruktion ermöglicht ein bis zu 40 % schnelleres Bohren bei gleichzeitig bis zu 50 % geringerer Anpresskraft gegenüber herkömmlichen HSS‑Bohrern. Diese Kombination steigert die Produktivität in Werkstatt und Produktion. Tiefbohren sicher und kontrolliert umsetzen Dank der Tieflochspirale nach DIN 1869 und der extra langen Ausführung eignet sich der Bohrer besonders für tiefe Sacklochbohrungen oder schwer zugängliche Stellen. Bei Einsatz in Handgeführten Maschinen empfiehlt sich ein Anpunkten mit einem Zentrierbohrer zur erhöhten Positioniergenauigkeit. Kühlung und moderate Drehzahlen verlängern die Lebensdauer und verhindern übermäßige Spannungsbildung im Bohrgut. Materialeigenschaften und Fertigungsdetails Der geschliffene Spiralkeil führt zu sehr scharfen Kanten und exakter Bohroberfläche, weshalb diese Ausführung bei anspruchsvollen Metallarbeiten bevorzugt wird. Der Spitzenwinkel 135° reduziert das Ausbrechen beim Anbohren harter Werkstoffe wie legiertem Stahl oder Edelstahl. Beachten Sie, dass geschliffene Bohrer empfindlicher gegenüber Biegebeanspruchung sind; stationäre Aufnahme und Kühlung erhöhen die Standzeit deutlich. Zielgruppe, Einsatzbereiche und Praxisempfehlungen Dieser Spiralbohrer wurde für Werkstätten, Montagebetriebe und ambitionierte Handwerker entwickelt, die präzise Tiefbohrungen in legierten und unlegierten Stählen, Gusswerkstoffen und Hartkunststoffen benötigen. Für optimale Ergebnisse empfiehlt sich die Nutzung von Kühlschmierstoff, angepasste Drehzahl und bei Bedarf ein mehrstufiges Bohren bei größeren Querschnitten. Bei Fragen zur passenden Anwendung berät Metav kompetent und praxisnah. Empfehlung: MetavCUT Standard Line Spiralbohrer für präzise Tiefbohrungen direkt über Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 erwerben Produktmerkmale Artikelnummer: 33025-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Norm: DIN 1869 Material: HSS-G Ausführung: extra lang Daten Durchmesser: 2,5 mm Gesamtlänge: 180 mm Spirallänge: 120 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Schaftausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine Eignung: legierter und unlegierter Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle, Hartkunststoff HSS‑G: Hochgeschwindigkeitsstahl, geschliffen FAQ Für welche Materialien ist der MetavCUT Spiralbohrer geeignet? Der MetavCUT Spiralbohrer (Standard Line, SKU 33025-FDA) eignet sich für legierte und unlegierte Stähle, Gusswerkstoffe sowie Nichteisenmetalle und Hartkunststoffe; bei härteren Materialien empfiehlt sich der Einsatz des 135° Spitzenwinkels. Ist der Spiralbohrer für die Handbohrmaschine geeignet? Ja, der Spiralbohrer von MetavCUT ist für Handbohrmaschinen und Werkstattausrüstungen ausgelegt; bei tiefen Bohrungen sollten Kühlung und kontrollierte Drehzahlen verwendet werden, um die Standzeit zu erhöhen. Welche Vorteile bietet die geschliffene Ausführung? Die geschliffene Ausführung des HSS‑G Spiralbohrers (MetavCUT Standard Line, 33025-FDA) liefert schärfere Kanten und höhere Rundlaufgenauigkeit, was zu saubereren Bohrlöchern und weniger Nacharbeit führt. Wie tief kann mit dem extra langen Spiralbohrer gebohrt werden? Die extra lange Ausführung mit einer Spirallänge von 120 mm und Gesamtlänge 180 mm ist für tiefe Bohrungen konzipiert; bei extremen Tiefen wird dennoch Kühlung und abgestuftes Aufbohren empfohlen. Welche Wartungstipps gibt es für lange Standzeiten? Für lange Standzeiten empfiehlt Metav: Kühlung einsetzen, passende Drehzahlen wählen, bei Bedarf anplicken und stationäre Spannmittel nutzen; diese Hinweise gelten besonders für den MetavCUT Spiralbohrer SKU 33025-FDA.
2.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill Spiralbohrer – Twist Drill, 2.5 mm Ø, 135° tip, extra long, bright finished, fully ground, HSS‑G (DIN 1869) A Twist Drill Spiralbohrer designed for deep, precise metal drilling in Drilling Machines and hand-held drills. Extra-long design for deep holes HSS‑G fully ground for faster, precise drilling 135° tip angle for harder materials Conforms to DIN 1869 for demanding applications High-performance material for demanding Metalwork HSS‑G construction delivers a combination of hardness and cutting-edge geometry that benefits metalworking tasks. The fully ground flute geometry provides sharp cutting edges and high runout accuracy, which results in cleaner holes and less rework. According to internal data, the ground HSS design can enable up to 40% faster drilling while requiring approximately 50% less feed force compared with conventional rolled HSS bits, improving efficiency in production and workshop environments. Built for deep holes and tough materials The extra long overall length of 225 mm with a spiral length of 150 mm makes this Twist Drill especially suitable when access is limited or when long through-holes are needed. The 135° tip angle is optimised for harder materials — it reduces initial biting and shortens approach time into the workpiece, which is advantageous when drilling stainless steel and other high-strength alloys up to 1000 N/mm². Precision geometry and recommended usage The fully ground (CNC‑ground) flute and shank ensure high concentricity and precise hole quality, which is particularly important for metal and hard-plastic applications. Ground Twist Drills are sharper and generally produce superior surface finish; however, they can be relatively more brittle than rolled types. For best results, use the MetavCUT Twist Drill in stationary Drilling Machines with appropriate cooling and controlled feed to extend tool life. Typical applications and target users This Twist Drill is intended for professional machinists, maintenance technicians and metalworking shops that require reliable deep-hole performance. It is suitable for legierte und unlegierte Stahl (alloyed and unalloyed steel), Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle and hard plastics. The Extra Long design supports drilling operations where standard-length bits are insufficient, while the DIN 1869 specification assures compatibility with industrial production standards. Highly recommended: Choose the MetavCUT Twist Drill for deep, precise metal drilling — contact METAV Werkzeuge for expert technical advice via email info@metav-werkzeuge.com, by phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 34025-FDA Diameter: 2.5 mm Tip angle: 135° Overall length: 225 mm Spiral length: 150 mm Execution: extra long Colour/Finish: bright finished Shank execution: fully ground Material: HSS‑G Standard: DIN 1869 For machine: Drilling Machine / Hand Drills Application: Drills for metal Model series: Standard Line Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Is the MetavCUT Twist Drill suitable for stainless steel and high-strength alloys? The MetavCUT Twist Drill is designed to machine materials such as stainless steel and other high-strength alloys up to around 1000 N/mm²; its 135° tip and HSS‑G ground geometry help reduce drilling forces and improve centring in tougher materials. Can the MetavCUT Twist Drill be used in a hand-held drill? The MetavCUT Twist Drill can be used in hand-held drills for lighter tasks, but optimal performance and tool life are achieved in a stationary Drilling Machine with adequate clamping and coolant due to the Extra Long design and ground geometry. What is a Twist Drill used for? A Twist Drill is mainly applied to the machining of high-strength materials and larger drill diameters; its ground geometry is easy to re‑sharpen and resists heavier loads, making it suitable for demanding metal drilling. Which three drill types exist? The three main drill categories are metal drills, wood drills, and stone/concrete drills. Why are Twist Drills sharpened? Sharpening reduces the cross‑edge at the drill point; by re‑pointing the tip, frictional forces are substantially lowered so that less feed force is needed and the drill centres more accurately in the workpiece. Can you drill wood with a Twist Drill? A metal Twist Drill can be used in wood, but guidance and finish are generally inferior compared with dedicated wood drills; metal bits are easier to re‑sharpen and have less self‑feeding tendency. For which drilling depths is the Twist Drill most commonly used? A through-hole in solid material is typically made with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The common belief that HSSE is automatically superior to HSS is not universally correct; assess the working conditions to determine whether the higher cost of HSSE is justified for your application.
2.5mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill — Type N extra short, Ø 2.5 mm, 118° tip, Bright Finished, HSS‑G, DIN 1897 (MetavCUT) The Twist Drill is an extra short Type N drill designed for metalworking with a 2.5 mm Diameter and a 118° Tip Angle, suitable for Hand Drilling Machines and compact operations. Extra short design for high stability and tight spaces Ground HSS‑G for up to 40% faster drilling Cylindrical Shank for universal chuck compatibility Conforms to DIN 1897 for consistent quality Optimised for metal drilling and thin sheet applications Precise metalworking with higher feed efficiency The extra short design of this Twist Drill delivers noticeably improved Stability and reduced breakage risk when compared with standard-length tools. The Ground HSS‑G cutting geometry reduces required Feed Force and increases Penetration Speed, so holes in alloyed and unalloyed Steel, Cast Iron and Non‑Ferrous Metals are produced more reliably. For users who require controlled drilling in limited access areas, the shortened Overall Length improves handling and reduces vibration while maintaining concentricity. Material advantages and drilling behaviour Manufactured from HSS‑G, the tool offers robust wear resistance and edge retention for demanding metal operations. The 118° Tip Angle favours softer metals and provides easier centring on curved surfaces, while the classic Type N flute geometry is optimised for chip evacuation in metalworking. The Cylindrical Shank ensures universal compatibility with standard three‑jaw chucks, although users should note increased slippage risk under very high torque compared with hex or triangular shanks. Ideal applications and target users This drill is aimed at professionals and hobbyists working with sheet metal, profile sections and machine components where compact tooling and precise results matter. It excels in Hand Drilling Machine use and is suitable for drilling into Steel, Cast Steel, Sintered Iron and various Hard Plastics. For projects requiring repeatable and centred holes in thin materials or confined setups, the shortened geometry provides a clear advantage and reduces the chance of deflection. Handling tips and what makes this drill stand out To achieve best results, use moderate cutting speeds and steady feed; lubrication is recommended for alloyed steels to extend tool life. The Extra Short format reduces bending moments and is therefore less prone to runout, while the DIN 1897 conformity guarantees dimensional and geometric consistency. The product’s Bright Finished surface supports easy identification and corrosion resistance during storage. For precision metal drilling, choose the MetavCUT Twist Drill Type N with 2.5 mm Diameter and extra short design — METAV Werkzeuge provides expert technical advice and support: info@metav-werkzeuge.com, Tel +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill (Twist Drill / Spiralbohrer) Brand: MetavCUT SKU: 56025-FDA Diameter: 2.5 mm Tip Angle: 118° Type: Type N Material: HSS‑G Execution: Extra short Colour / Finish: Bright Finished Shank Design: Cylindrical Spiral Length: 14 mm Overall Length: 43 mm Series: Standard Line Application: Drills for Metal For use with: Drilling Machine (Hand Drilling Machine) Standard: DIN 1897 Additional note: Extra short length increases stability and is suitable for thin materials and tight spaces Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N mainly used for? The MetavCUT Twist Drill Type N is primarily applied to the machining of high‑strength workpieces and larger hole diameters; its robust geometry and grind make it suitable for alloyed and unalloyed steels, cast materials and hard plastics while resisting higher loads. Which three drill types exist? Commonly distinguished drill types are Metal Drills, Wood Drills and Stone/Concrete Drills; the MetavCUT Twist Drill Type N belongs to the Metal Drill category and is tailored to metalworking tasks. Why are Twist Drills sharpened at the point? The point sharpening reduces the cross‑edge at the tip of the Twist Drill, which lowers friction and required feed forces while improving centring accuracy in the Workpiece. Can a metal Twist Drill be used for wood? A Metal Drill can be used in Wood, but guidance and finish are usually inferior compared with dedicated Wood Drills; however, Metal Drills are easier to re‑sharpen and have lower self‑feeding tendency. For which drilling depths is the Twist Drill most used? A full‑bore operation is commonly executed with a Twist Drill. For diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most frequently used tool.
2.5mm HSS-G Twist Drill DIN 338 ,fully ground, silver - MetavCUT
Twist Drill — fully ground HSS‑G, 2.5 mm, 118°, hexagonal shank, silver, DIN 338, MetavCUT The Twist Drill is a fully ground HSS‑G drill bit designed for precision metalworking on drilling machines, offering a 2.5 mm diameter and a 118° point angle for reliable centring and clean holes. Fully ground HSS‑G for precise metal holes Hexagonal shank for form‑fit torque transfer DIN 338 compliant short twist drill 118° point angle improves centring on curves 80 mm overall length for versatile reach Precision and material: why fully ground HSS‑G matters A fully ground HSS‑G construction ensures very sharp cutting edges and high runout accuracy, which produces cleaner, more precise holes in metals. For users working with alloyed or unalloyed steel, cast steel, and non‑ferrous metals, the combination of ground geometry and HSS‑G material delivers faster drilling and reduced required feed force compared with roll‑formed variants. For the occasional user, this means fewer torn edges and less rework; for professionals, it supports higher reproducibility on production parts. Shaft design and practical handling benefits The hexagonal shank (hexagon shaft) enables secure engagement in quick‑change holders and many cordless drivers without slipping, improving torque transfer and reducing downtime for bit changes. Because the shank is form‑fitting, operators experience more consistent cutting behavior when using hand drills or drilling machines. This design choice is particularly useful when working on jobs that require rapid tool swaps and firm rotational control. Geometry and recommended applications for cleaner holes With a 118° point angle, this twist drill penetrates softer metals and aluminium more easily and centres well on slightly curved surfaces. The geometry also supports typical metalworking tasks where entry burr and hole roundness are important. For drilling in harder materials or when drilling deep, consider matching coolant use and reduced speeds to prolong tool life and avoid brittle breakage typical of very sharp ground drills. Versatility and intended users This bit suits metalworkers, maintenance technicians, and workshop professionals who require reliable, repeatable results in light‑to‑medium metal drilling. The 2.5 mm diameter and 80 mm overall length provide a balance between reach and rigidity, making the bit practical for general fabrication and repair work. Users seeking simple, serviceable tooling will appreciate that the bit can be re‑sharpened and is compatible with standard holders and many drill chucks. How the DIN standard and grinding process support quality Conforming to DIN 338 signals that the geometry and dimensions meet established standards for short twist drills with cylindrical shanks. The term "fully ground" means the flute geometry is produced by CNC grinding rather than roll forming, which typically results in superior concentricity and sharper edges. For customers unfamiliar with these terms: grinding produces a more accurate cutting profile, while DIN 338 guarantees standardized dimensions and interchangeability. Choose MetavCUT’s Twist Drill in fully ground HSS‑G for demanding metalwork — for detailed technical advice or help selecting the right diameter and geometry, contact METAV Werkzeuge for expert consultation at info@metav-werkzeuge.com or +49 2822 7131930 (WhatsApp +49 170 2837271). Technical Data Designation: Twist Drill (Spiralbohrer) Marke: MetavCUT SKU: 57025-FDA Diameter: 2.5 mm Point angle: 118° Execution / Finish: fully ground (geschliffen) Colour: silver Intended for: Drilling Machine (Handbohrmaschine) Spiral length: 30 mm Overall length: 80 mm Shank design: hexagonal (sechskant) Series: Standard Line Application: Drills for metal (Bohrer für Metall) Material: HSS‑G Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which brand supplies this bit? The MetavCUT Twist Drill (Twist Drill for Drilling Machine) is primarily used for machining high‑strength materials and larger drill diameters; its ground flute geometry makes it easier to sharpen and able to withstand greater loads, delivering precise, clean holes in metalworking tasks. Which three drill types exist and how does the MetavCUT Twist Drill fit among them? The main drill categories are metal drills, wood drills, and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for steels and other metals rather than masonry or specialised wood bits. Why are Twist Drills pointed (why is the tip ground)? The tip of the Twist Drill by MetavCUT is sharpened to reduce the chisel edge at the centre; this lowers friction and required feed forces while improving self‑centring in the workpiece for a cleaner start and better hole accuracy. Can a metal Twist Drill be used in wood? A MetavCUT metal Twist Drill can be used in wood, but it offers less guidance and a rougher finish than dedicated wood bits; however, it is easier to resharpen and tends to have a lower tendency to self‑feed compared with some wood‑specific designs. For which drilling depths is the Twist Drill most commonly used? A through hole produced with a Twist Drill is common up to a diameter of about 20 mm and drilling depths up to 100 mm; in such ranges the Twist Drill is the most frequently used tool for metal removal. Is HSS or HSSE better for my application? Choosing between HSS and HSSE depends on working conditions; the general belief that HSSE is always superior to HSS is incorrect. Assess whether your operating conditions justify the higher cost of HSSE before deciding; the MetavCUT Twist Drill in HSS‑G offers a strong balance of performance and economy for many metalworking tasks.
2.5mm HSS-G Twist Drill DIN 338 ,left cutting - MetavCUT
Twist Drill (Left-cutting) 2.5 mm — HSS‑G, 135° | MetavCUT Profi Line The Twist Drill by MetavCUT is a left-cutting HSS‑G drill designed for metalworking and targeted screw-extraction tasks when using a drilling machine or compatible hand drill. Left-cutting for counterclockwise screw extraction 135° point angle for harder materials HSS‑G construction for heat resistance and durability Conforms to DIN 338 for short shank drills Faster metalworking thanks to left-cutting geometry The left-cutting design of this Twist Drill allows reliable counterclockwise cutting, which is particularly useful when removing broken or seized screws. Because the flute and cutting lip are configured for left rotation, the Tool often reduces the need for additional extraction steps and supports quicker intervention in repair and maintenance. This geometry also contributes to decreased thrust forces, so drilling becomes more controlled and efficient. Robust HSS‑G material for sustained performance Manufactured from HSS‑G, the drill offers improved heat resistance and wear behaviour compared with standard high-speed steels. This ensures longer tool life under continuous use and when tackling tougher Alloys. Users benefit from consistent cutting performance and reduced tool changes, which is valuable in production runs or workshop environments where downtime impacts throughput. Optimised for harder metals with a 135° point angle A 135° point angle is tailored for entry into harder Materials such as Stainless Steel and other alloys, reducing walking and improving centring on difficult surfaces. For less experienced operators: the point angle describes how steep the tip is—larger angles penetrate more gradually and are better suited to hard Substrates, whereas sharper angles are used for softer Materials. This feature helps achieve cleaner holes and more predictable results when working with metal. Engineered to industry standard DIN 338 for consistent compatibility Conforming to DIN 338 means the product meets established dimensions and tolerances for short shank twist drills, simplifying tool selection and machine setup. Workshops can rely on predictable shank fit and tool behaviour across machines. The Profi Line execution reflects a focus on practical workshop use, where reproducibility and interchangeability matter for efficient tool management. Strong recommendation: Choose MetavCUT for demanding metalwork—contact METAV Werkzeuge for expert advice and personalised support via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 60025-FDA Diameter: 2.5 mm Point Angle: 135° Material: HSS‑G Execution: left-cutting Suitable for: Drilling Machine / Hand Drill Model Series: Profi Line Application: Drills for Metal Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for and in which situations is the MetavCUT Twist Drill particularly suitable? Twist Drills like the MetavCUT Twist Drill are primarily used for metalworking and are especially effective when machining high‑strength Materials or when extracting broken screws; the left-cutting variant is designed to cut when the spindle runs counterclockwise, aiding screw removal and reducing required feed force. Which three drill types are commonly distinguished and where does the MetavCUT Twist Drill fit in? The three main categories are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for use in metalworking applications.
2.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Type N — 2.5 mm, 135° | Short HSS‑G, Bright Finished (DIN 338) The Twist Drill Type N is a short, fully ground HSS‑G drill designed for precision metal drilling in Drilling Machines and Hand Drills. Short design for greater stability 2.5 mm diameter for precise holes HSS‑G: faster drilling, lower thrust 135° tip for hard materials like stainless steel Conforms to DIN 338 for short twist drills High performance: faster drilling with less effort This HSS‑G short Twist Drill delivers measurable efficiency: the ground HSS geometry permits up to 40% faster drilling and requires about 50% less thrust compared with conventional HSS drills. That translates into reduced operator fatigue and improved cycle times in repetitive metalworking tasks. The combination of fully ground shank and short overall length enhances torque transfer, so each drilling operation becomes noticeably more effective. Built for stability and precision in metalworking A short Twist Drill manufactured to DIN 338 offers superior rigidity thanks to a reduced overhang. This stability minimises deflection and supports accurate, repeatable hole placement when working with steels, cast materials and non‑ferrous metals. The reduced cantilever length is particularly advantageous in tight setups or when drilling on portable machines where control and concentricity are critical. Tip geometry and material explained for better results The 135° tip angle is selected for harder materials; a larger point angle reduces initial cutting pressure and improves performance in stainless and tempered steels. Type N denotes the normal spiral suited for metal drilling. If unfamiliar with terms: HSS‑G means high‑speed steel, ground finish — a material and manufacturing style that balances toughness with sharp cutting edges and makes resharpening straightforward when needed. Who benefits and typical applications Workshops, maintenance teams and precision fabricators benefit most from this short Twist Drill. It is optimised for Drilling Machines and Hand Drills when high rigidity and clean hole quality are required. Typical uses include drilling in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, tempered components, non‑ferrous metals and hard plastics where tool life and hole accuracy matter. Strong recommendation: choose the MetavCUT HSS‑G Twist Drill for demanding metalworking tasks and contact METAV Werkzeuge for expert advice — Email: info@metav-werkzeuge.com · Tel: +49 2822 7131930 · WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 27025-FDA Diameter: 2.5 mm Point angle: 135° Type: Type N Material: HSS-G Norm: DIN 338 Execution: short Spiral length: 30 mm Overall length: 57 mm Shank finish: fully ground Colour / Finish: bright finished Suitable for: Drilling Machine / Hand Drill Model series: Basic Line Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill by MetavCUT used for? The Twist Drill from MetavCUT is primarily applied to the machining of high‑strength materials and larger drill diameters; its design is robust and easy to resharpen, allowing it to withstand greater loads while maintaining performance. Which 3 drill types exist? Commonly distinguished drill types are Metal Drill, Wood Drill and Masonry/Concrete Drill. These categories reflect typical geometry and tip design optimised for each material group. Can the MetavCUT Twist Drill be used in a handheld drill? Yes, the MetavCUT Twist Drill (Type N) can be used with Hand Drills; however, its short design and HSS‑G material make it best suited to applications where greater stability and controlled feed are possible for clean, accurate holes.
2.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Der kurze Spiralbohrer von MetavCUT kombiniert HSS‑G‑Material und DIN‑338‑Norm für hohe Stabilität und saubere Bohrbilder. Die kurze Ausführung reduziert Auslenkung, ermöglicht präzise Bohrungen in Stahl und Guss und spart durch optimierte Geometrie Zeit und Kraft bei der Zerspanung. Spiralbohrer — kurzer HSS‑G Metallbohrer (Profi Line) Der Spiralbohrer ist ein kurzer, geschliffener HSS‑Bohrer nach DIN 338 für präzise Metallbohrungen an stationären und handgeführten Maschinen. Stabiler Kurzbohrer für präzise Ergebnisse HSS‑G geschliffen für scharfe Kanten Geeignet für legierten und unlegierten Stahl Kurze Auskraglänge reduziert Vibrationen Passend für Handbohrmaschine und Maschinenbetrieb Stabile Ausführung für exakte Bohrungen Kurze Spiralbohrer mit geringer Auskraglänge bieten deutlich mehr Steifigkeit als lange Varianten. Die reduzierte Auslenkung sorgt für gleichmäßigere Bohrbilder und bessere Rundlaufgenauigkeit, was gerade bei Durchmessern im Standard‑Bereich entscheidend ist. Die geschliffene Schaftgeometrie trägt zu sauberer Spanabfuhr und reproduzierbaren Ergebnissen bei, wodurch Nacharbeit und Maßabweichungen minimiert werden. Besonders bei stationären Maschinen amortisiert sich die höhere Präzision schnell. Effizienz durch optimierte Geometrie und geringere Anpresskraft Die spezielle Geometrie des Kurzbohrers ermöglicht ein bis zu 40 % schnelleres Bohren bei gleichzeitig 50 % weniger Anpresskraft gegenüber konventionellen HSS‑Bohrern. Diese Kombination reduziert Maschinenbelastung und erhöht den Durchsatz bei Serienarbeiten. Für Anwender bedeutet das: kürzere Bearbeitungszeiten und weniger Wärmeentwicklung im Bohrbereich, sofern geeignete Kühlschmierstoffe verwendet werden. Die Wirtschaftlichkeit ergibt sich insbesondere bei häufigen Bohrzyklen in Stahl. Vielfältige Materialeignung für metallische Werkstoffe Metallische Werkstoffe wie legierter Stahl, unlegierter Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff können mit diesem Bohrer zuverlässig bearbeitet werden. Der Typ N mit Normalspirale ist speziell für Metall optimiert und bietet eine ausgewogene Spanformung. Anwender, die regelmäßig in wechselnden Werkstoffen bohren, profitieren von der universellen Einsetzbarkeit und der Normierung nach DIN 338, die Fertigungs‑ und Austauschbarkeit sichert. Empfehlungen für den Einsatz und Maschinenkompatibilität Empfohlen wird die Verwendung auf stationären Säulenbohrmaschinen oder stabilen Handbohrmaschinen mit gutem Rundlauf. Vorzentrieren bei hoher Präzision reduziert Wandern beim Anbohren. Zur Standzeitverlängerung empfiehlt sich Kühlung bei hohen Schnitttiefen und die Nutzung passender Spannfutter mit sauberem Rundlauf. Die kurze Länge erlaubt sicheren Einsatz auch bei beengten Zugängen und minimiert das Risiko von Bruch durch Biegung. MetavCUT Spiralbohrer Profi Line SKU 48025‑FDA für präzise Metallbohrungen einsetzen und Bearbeitungsqualität sofort steigern — Beratung per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 48025-FDA Marke: MetavCUT Serie: Profi Line Bezeichnung: Spiralbohrer Fakten Durchmesser: 2,5 mm Gesamtlänge: 57 mm Spirallänge: 30 mm Spitzenwinkel: 118° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Geschliffen) Schaftausführung: geschliffen Norm: DIN 338 Ausführung: kurz Typ: Typ N Für Bohrmaschine: Handbohrmaschine Farbe: blank (bright finished) Anwendung: Bohrer für Metall FAQ Für welche Materialien eignet sich der Spiralbohrer am besten? Der MetavCUT Spiralbohrer Profi Line SKU 48025‑FDA ist besonders geeignet für legierten und unlegierten Stahl, Gussstahl und Nichteisenmetalle; durch die geschliffene HSS‑Geometrie lassen sich zudem Hartkunststoffe sauber bearbeiten. Ist der kurze Spiralbohrer für Handbohrmaschinen geeignet? Ja, die kurze Ausführung wurde so konzipiert, dass sie auch auf Handbohrmaschinen mit gutem Rundlauf eingesetzt werden kann; bei höherer Präzision empfiehlt sich zusätzliches Zentrieren vor dem Anbohren. Wie wirkt sich der Spitzenwinkel von 118° aus? Der Spitzenwinkel von 118° bietet eine gute Balance für Metallbearbeitung und erleichtert das Eindringen in weichere Metalle; bei sehr harten Werkstoffen kann ein kleinerer Winkel sinnvoll sein. Welche Vorteile bietet die geschliffene Schaftausführung? Die geschliffene Schaftausführung (HSS‑G) sorgt für sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, was zu saubereren Bohrlöchern und besserer Maßhaltigkeit führt.
2.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated - MetavCUT
MetavCUT Twist Drill (Short) — 2.5 mm, 118° Tip, HSS‑G, TIN‑coated, Fully Ground, DIN 338 The short MetavCUT Twist Drill is a precision metalworking tool for Drilling Machines, designed for stable, fast and clean holes in alloyed and unalloyed metals. Short design for increased stability and precision TIN‑coated surface for reduced wear and friction Fully ground shank for high concentricity and clean holes Complies with DIN 338 for short HSS Twist Drills Optimised for metal drilling with 118° tip angle Greater stability and accurate results for metalworking Shorter overall length reduces overhang and significantly improves stability during machining. The compact geometry of this short Twist Drill minimises bending and vibration, enabling more precise hole positions and better surface finish. For operators who demand repeatable accuracy, the reduced deflection means lower scrap rates and faster setup, particularly when working on hardened or alloyed metals. Coating and material that extend service life The combination of HSS‑G substrate and a TIN‑coated surface reduces friction and wear during cutting, especially under lubrication or coolant. This coating lowers thermal load at the cutting edges and helps maintain sharpness over longer production runs, which translates into longer tool life and fewer tool changes. For users machining Copper, Bronze or Tempered Steel, the TIN layer improves durability and process stability. Precision shank and geometry for clean holes A fully ground shank and CNC‑ground flute geometry produce sharp cutting edges and excellent concentricity. The ground design enables up to 40% faster penetration with about 50% less feed force compared with conventional HSS drills, resulting in cleaner bores and reduced torque on handheld or stationary Drilling Machines. This is advantageous when tight tolerances and high repeatability are required. Engineered to standards and practical applications Designed to DIN 338, this short Twist Drill follows established dimensional and manufacturing criteria for short cylinder‑shank HSS drills. The 118° tip angle is suitable for many common metals and softer materials where easier centring is beneficial. Typical applications include precision component manufacture, toolroom operations and general metal fabrication where controlled entry and minimal wander are important. Who benefits from this short Twist Drill Manufacturers, maintenance workshops and precision trade shops will appreciate the tool’s combination of rigidity and wear resistance. The design suits both bench‑mounted and portable Drilling Machines used for small to medium diameters. For users needing reliable, easy‑to‑regrind drills with predictable behaviour under coolant, this tool offers a balanced solution. We recommend the robust MetavCUT short Twist Drill for precision metal drilling — for technical advice or to confirm suitability for your application, contact METAV Werkzeuge: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 28025-FDA Diameter: 2.5 mm Overall length: 57 mm Spiral length: 30 mm Tip angle: 118° Material: HSS‑G Execution: Short Shank finish: fully ground Coating/Colour: TIN‑coated Application: Drills for metal Suitable for: Drilling Machine Model series: Basic Line Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill short used for? The MetavCUT Twist Drill short is primarily used for precision drilling in high‑strength and general metals. This short Twist Drill excels where stability and minimal deflection are needed; it is suitable for alloyed and unalloyed steel, cast iron, copper, bronze and hard plastics, delivering clean, accurate holes even under demanding conditions. Which three drill types exist? In general drilling practice the main categories are Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Twist Drill belongs to the Metal drills group and is optimised for machining metals with appropriate coolant and correct feed rates. Why are Twist Drills sharpened? Sharpening reduces the cross‑edge at the tip, which lowers friction and therefore the necessary feed force. For the MetavCUT Twist Drill, proper tip geometry improves centring in the workpiece and reduces cutting resistance, resulting in easier drilling and better hole quality. Are you unsure whether this tool meets your requirements or need further technical data? METAV Werkzeuge offers comprehensive expert advice — contact us at info@metav-werkzeuge.com, call +49 2822 7131930 or message via WhatsApp +49 170 2837271.
2.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill — Short Type N, 2.5 mm, 118°, TiN-coated HSS-G (DIN 338) by MetavCUT The Twist Drill is a short Type N metalworking drill designed for precision drilling in alloys and steels with a 2.5 mm diameter and a 118° point angle. Short design for greater stability and precision TiN-coated surface for extended tool life Fully ground HSS-G for faster cutting and clean holes Conforms to DIN 338 for consistent quality Optimised for Drilling Machine applications Precision and stability for demanding metalwork The short geometry of this Twist Drill reduces the unsupported overhang, resulting in higher stability and less tendency to deflect under load. This design advantage makes it particularly suitable for precision work and for drilling in hard materials such as alloyed steel and tempered castings. The 118° point angle supports accurate centring on slightly convex surfaces and improves initial penetration, which is beneficial when accurate positioning is critical. Longer lifetime through coating and material A TiN-coated surface combined with HSS-G substrate reduces friction and wear during cutting, increasing service life under metalworking conditions. Titanium nitride lowers adhesion of chips and heat buildup, while the fully ground HSS geometry delivers sharper cutting edges and improved chip evacuation. Together these properties help maintain performance over many holes when used with appropriate cooling. Faster drilling with lower feed force The ground flute geometry of this short Twist Drill enables up to 40% faster drilling and requires significantly less axial force compared with conventional HSS types. This leads to smoother operation on both stationary and portable drilling machines and reduces operator fatigue. For best results, pairing the drill with suitable coolant or cutting fluid minimises thermal stress and preserves cutting geometry. Application scope and recommended usage Designed to meet DIN 338, this short Type N Twist Drill is intended primarily for metalworking tasks such as drilling in alloy and unalloyed steels, cast iron, sintered iron, non-ferrous metals and hard plastics. Use in a drilling machine with correct speeds and lubrication is advised. Because the drill is ground rather than rolled, expect very precise hole quality and good concentricity, while taking care to avoid excessive impact loading to prevent brittle fracture. Strongly recommended: choose the MetavCUT Twist Drill for professional metalworking tasks and contact METAV Werkzeuge for tailored technical support — 📧 info@metav-werkzeuge.com | ☎️ +49 2822 7131930 | ✔️ WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 46025-FDA Diameter: 2.5 mm Overall length: 57 mm Spiral length: 30 mm Point angle: 118° Type: Type N Execution: Short Shaft design: Fully ground Material: HSS-G Coating/Colour: TiN-coated Application: Drills for metal / Drilling Machine Model series: Standard Line Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit this MetavCUT Twist Drill Type N? The MetavCUT Twist Drill Type N is used mainly for drilling metal; it is especially suited to alloyed and unalloyed steel, cast iron, sintered iron, non-ferrous metals and hard plastics. Its short construction and HSS-G substrate make it appropriate for precise metalworking where stability and hole quality are priorities. Which three drill types exist and how does the Twist Drill compare? The three common drill types are metal drills, wood drills and masonry/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking, offering sharper ground geometry and TiN coating compared with general-purpose wood or masonry drills.
2.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Der kurze Spiralbohrer verbindet hohe Stabilität, schnelle Spanabfuhr und verschleißarme TiN-Beschichtung zu einer wirtschaftlichen Lösung für die Metallbearbeitung; Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT, HSS-G, kurze Ausführung Der Spiralbohrer eignet sich als kurzes, stabil geführtes Werkzeug für präzise Bohrungen in Stahl und Nichteisenmetallen bei Werkstatt- und Montagearbeiten. Kurze Ausführung für höhere Stabilität TiN-Beschichtung reduziert Verschleiß Geschliffener HSS-G für präzise Bohrungen Geeignet für Handbohrmaschine und stationäre Maschine DIN 338-konforme Fertigung und Abmessung Hohe Stabilität durch kurze Auskraglänge Die kurze Ausführung sorgt für deutlich verminderte Auslenkung und damit für höhere Präzision bei der Bohrung. Gerade bei engen Toleranzen und kleiner Bohrtiefe erhöht die reduzierte Auskraglänge die Rundlaufgenauigkeit und verringert das Risiko von Ausbrechen oder Wanderung bei dünnen Kanten. Das Ergebnis sind sauberere Bohrungen und geringerer Nacharbeitaufwand für Werkstatt und Produktion. Beschichtung und Material verlängern die Standzeit Der Einsatz von HSS-G in Verbindung mit einer TiN-Beschichtung reduziert Reibung und thermischen Verschleiß beim Arbeiten in harten Werkstoffen. Durch die Kombination aus geschliffener Geometrie und Hartstoffbeschichtung steigt die Lebensdauer des Werkzeugs, insbesondere bei Nutzung eines geeigneten Kühlsystems. Diese Eigenschaften sorgen für gleichbleibende Bohrergebnisse und weniger Werkzeugwechsel in längeren Fertigungsserien. Vielseitigkeit bei Metallwerkstoffen Das Werkzeug ist ausgelegt für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen sowie Kupfer, Bronze und Hartkunststoff. Die normale Spirale (Typ N) gewährleistet sichere Spanabfuhr bei typischen Metallbearbeitungen und ermöglicht zuverlässige Ergebnisse in gängigen Werkstattanwendungen. Für spezielle Werkstoffe empfiehlt sich die Anpassung von Schnittgeschwindigkeit und Kühlung. Praxisempfehlungen für sichere Anwendung Bei Einsatz mit Handbohrmaschine oder stationärer Maschine empfiehlt sich Anpunkten mit einem Zentrierbohrer bei hoher Präzision. Die Spitzenwinkel von 118° sind universell einsetzbar, eignen sich besonders für weichere bis mittelharte Werkstoffe und bieten guten Zentrieraufschlag. Kühlung oder Schneidöl verlängern die Standzeit und reduzieren Wärmebildung bei längeren Bohrungen. Vorteile geschliffener Fertigung und Leistungsvorsprung Die geschliffene Schaftausführung führt zu scharfen Schneiden und hoher Rundlaufgenauigkeit, was saubere Bohrbilder fördert. Der geschliffene HSS-G Bohrer ermöglicht nach Herstellerangaben bis zu 40 % schnelleres Bohren bei gleichzeitig 50 % geringerer Anpresskraft verglichen mit herkömmlichen HSS-Ausführungen. Diese Effizienzvorteile reduzieren Bearbeitungszeit und körperliche Belastung in der Werkstatt. Zielgruppe und Einsatzszenarien Das Werkzeug richtet sich an Handwerk, Instandhaltung und industrielle Werkstätten, die präzise Metallbohrungen mit hoher Wiederholgenauigkeit benötigen. Stationäre Bohrmaschinen und robuste Handmaschinen profitieren gleichermaßen von der kurzen Ausführung; für sehr tiefe Bohrungen oder Hochleistungsserien in gehärtetem Stahl sind spezialisierte Lösungen zu prüfen. Empfehlung: Entscheiden Sie sich für den MetavCUT Profi Line Spiralbohrer zur effizienten und präzisen Metallbearbeitung; bei Fragen steht Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 bereit Produktmerkmale Artikelnummer: 41025-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Profi Line Norm: DIN 338 Fakten Durchmesser: 2,5 mm Gesamtlänge: 57 mm Spirallänge: 30 mm Spitzenwinkel: 118° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Oberfläche: TiN-Beschichtung (Verschleißreduzierung) Schaftausführung: geschliffen (CNC-Schliff für hohe Rundlaufgenauigkeit) Typ: Typ N (Normalspirale) Ausführung: kurz (reduzierte Auskraglänge) Für Bohrmaschine: Handbohrmaschine FAQ Welche Werkstoffe kann der Spiralbohrer von MetavCUT bearbeiten? Der MetavCUT Profi Line Spiralbohrer ist für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen sowie Kupfer, Bronze und Hartkunststoff geeignet und liefert in diesen Werkstoffen zuverlässige Ergebnisse. Wie beeinflusst die TiN-Beschichtung die Lebensdauer? Die TiN-Beschichtung des MetavCUT Spiralbohrers reduziert Reibung und thermischen Verschleiß, wodurch sich die Standzeit erhöht und die Werkzeugwechselhäufigkeit in längeren Fertigungsprozessen sinkt. Ist die kurze Ausführung für Handbohrmaschinen geeignet? Ja, die kurze Ausführung des Spiralbohrers eignet sich gut für Handbohrmaschine und stationäre Maschine, weil die reduzierte Auskraglänge die Stabilität verbessert und die Rundlaufgenauigkeit erhöht. Welche Vorteile bietet die geschliffene HSS-G-Ausführung? Die geschliffene HSS-G-Ausführung des MetavCUT Profi Line Spiralbohrers erzeugt schärfere Kanten und besseren Rundlauf, was zu saubereren Bohrlöchern und effizienterem Bohren führt. Welche SKU hat dieses Produkt und wo ist es normiert? Der Spiralbohrer von MetavCUT ist unter der SKU 41025-FDA gelistet und entspricht der Norm DIN 338.
2.5mm HSS-G Twist Drill DIN 338 - MetavCUT
Data conflict detected — inconsistent shaft information The provided product data contains contradictory details about the shank: the field "shaft_ausfuhrung" states "without multi-bevel cutting edge and triangular shank", while the product description (axite_enrichment) repeatedly refers to a "3-Kant Schaft" (triangular shank). This inconsistency raises concerns about the accuracy of the product specifications and could potentially lead to confusion for customers seeking precise information about the item. It is essential to resolve this discrepancy to ensure that all product details align correctly. Cannot generate a reliable product description until the shank/shaft information is clarified and confirmed to avoid any misunderstandings or misrepresentations in the product listing.
2.5mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Der Spiralbohrer von MetavCUT kombiniert HSS-G-Material, geschliffene Schaftgeometrie und die lange Ausführung nach DIN 340 zu einem zuverlässigen Werkzeug für tiefe Metallbohrungen; er ermöglicht schnelleres Arbeiten bei geringer Anpresskraft und bietet gleichzeitig hohe Rundlaufgenauigkeit. Bestellen Sie über Metav Werkzeuge oder nutzen Sie unsere Beratung, wenn Sie technische Details klären möchten. Spiralbohrer 2,5 mm – MetavCUT Standard Line Der Spiralbohrer in langer Ausführung nach DIN 340 ist für präzise Metallbohrungen konzipiert und eignet sich besonders für tiefere Bohrungen und schwer zugängliche Bohrstellen. Spiralbohrer 2,5 mm für präzise Metallbohrungen HSS-G geschliffen für saubere Bohrlöcher Lange Ausführung nach DIN 340 für tiefe Bohrungen Gesamtlänge 95 mm mit Spirallänge 62 mm Spitzenwinkel 118° ideal für allgemeine Werkstoffe Materialqualität für saubere und präzise Bohrungen Die Verwendung von HSS-G (geschliffen) sorgt für sehr scharfe Schneidkanten und eine hohe Rundlaufgenauigkeit, was zu saubereren Bohrlöchern in Stahl und Guss führt. Durch den CNC-Schliff reduziert sich die Reibung beim Eindringen, sodass sich die Bohrgeschwindigkeit erhöht und die benötigte Anpresskraft sinkt. Dieser Vorteil macht das Werkzeug besonders geeignet für Werkstätten, die Wert auf gleichbleibende Bohrbildqualität legen. Tiefe Bohrungen sicher und kontrolliert ausführen Die lange Ausführung gemäß DIN 340 mit einer Spirallänge von 62 mm und einer Gesamtlänge von 95 mm ermöglicht das Erreichen von tieferen Bohrpunkten und innenliegenden Bohrstellen ohne aufwändiges Umspannen. Anwender profitieren von besserer Zugänglichkeit bei Durchbrüchen und Bohrbuchsen. Für stabile Ergebnisse empfiehlt sich die Nutzung mit angemessener Kühlung und gegebenenfalls stationärer Maschine, um Bruchrisiken zu minimieren. Vielseitige Einsatzgebiete und kompatible Werkstoffe Im Standard-Bereich bietet dieser Bohrer Flexibilität für Werkstattarbeiten, Montage und DIY-Projekte; geeignet sind legierte und unlegierte Stähle, Gusseisen, Temperguss, Sintereisen, Nichteisenmetalle sowie Hartkunststoffe. Der Bohrer lässt sich mit Handbohrmaschine oder stationärer Säule einsetzen, wobei bei hoher Präzision ein Vorzentrieren die besten Ergebnisse liefert. So profitieren sowohl Profi-Handwerker als auch ambitionierte Heimwerker von der Vielseitigkeit. Handhabung, Schutz und Pflegetipps für längere Lebensdauer Da der Bohrer geschliffen ist, sind die Schneiden sehr fein und damit anfälliger für Bruch bei unsachgemäßer Benutzung; moderate Drehzahlen, kontinuierliche Kühlung und kontrollierter Vorschub verlängern die Standzeit merklich. Ein Zentrierbohrer hilft bei präzisen Passungen, und die Lagerung in einer schützenden Verpackung verhindert Kantendefekte. Diese einfache Pflege sorgt für dauerhafte Performance und konstante Bohrergebnisse. Empfehlen Sie den Einsatz des Spiralbohrers von MetavCUT für präzise Tiefbohrungen und sichern Sie die Verfügbarkeit über Metav Werkzeuge; bei technischen Fragen erreichen Sie uns per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 53025-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Standard Line Ausführung: lang Fakten Durchmesser: 2,5 mm Gesamtlänge: 95 mm Spirallänge: 62 mm Spitzenwinkel: 118° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (geschliffen) Schaftausführung: geschliffen Norm: DIN 340 (lange Ausführung) Farbe: blank Für Bohrmaschine: Handbohrmaschine Hersteller: MetavCUT Ausführung: lang FAQ Ist der Spiralbohrer für gehärteten Stahl geeignet? Der Spiralbohrer von MetavCUT aus HSS-G ist für legierte und unlegierte Stähle bis zu typischen Einsatzgrenzen geeignet, bei sehr hartem oder gehärtetem Stahl empfiehlt sich jedoch der Einsatz von Vollhartmetallwerkzeugen. Eignet sich der Bohrer für Handgebrauch mit Akkubohrschrauber? Ja, der Bohrer ist für die Nutzung mit Handbohrmaschine und Akkubohrschraubern im Standard-Bereich ausgelegt; bei tiefen Löchern oder hoher Präzision ist jedoch eine stationäre Maschine empfehlenswert. Wie sollte der Bohrer gekühlt werden, um Standzeit zu erhöhen? Kontinuierliche Nasskühlung oder zyklische Schmierung reduziert Wärme und sorgt für längere Standzeiten beim Spiralbohrer von MetavCUT; für die SKU 53025-FDA wird eine moderate Kühlung empfohlen. Brauche ich einen Zentrierbohrer vor dem Einsatz? Für hochpräzise Passungen oder wenn Wandern vermieden werden soll, empfiehlt sich ein Vorbohren mit einem Zentrierbohrer; das verbessert das Ergebnis bei Bohrungen mit dem Spiralbohrer MetavCUT Standard Line. Wie lager ich den Bohrer richtig, um Beschädigungen zu vermeiden? Die Lagerung in der Originalverpackung oder in einer geordneten Bohrerbox schützt die geschliffenen Schneiden; für die SKU 53025-FDA ist eine trockene, saubere Umgebung ideal.
High-performance drill bits for demanding production
Drill bits designed for industrial manufacturing where precision, repeatability and tool life are decisive. Based on a spectrum from HSS and kobalt-alloyed hss-e for universal use to solid carbide drills for high-speed, high-precision serial production, this range covers applications from general engineering to automotive supplier work.
Why these drill bits are essential in the workshop and on the machining centre
Function and behaviour:
- primary use: creating accurate cylindrical holes
- typical machines: CNC machining centres, lathes and drill presses
- key design aspects: optimised chisel edge, defined point angles, flute geometry for reliable chip evacuation
Technical advantages and process benefits:
- reduced feed forces through optimised point geometry
- improved heat control with advanced coatings and, where specified, internal coolant supply
- extended tool life using solid carbide variants and multilayer coatings such as TiN / TiAlN
- process security on challenging materials thanks to tailored materials and geometries
Concrete benefits that boost productivity and quality
- predictable tool life and fewer tool changes, lowering machine downtime
- stable hole quality and consistent tolerances across long runs
- efficient chip control and thermal management for safe deep-hole and hardened-material drilling
- suitability across a wide material range, reducing the need for multiple specialised tools
Metav as a reliable partner for high-precision tooling
Metav combines decades of sector expertise with a broad, dependable offering from its Emmerich facility. With over 48,000 customers and more than 250,000 products, Metav positions its range of drill bits, twist drills and indexable drills as a practical, quality-first choice for procurement managers and production engineers seeking dependable supply and technical competence.
Technical data (at a glance)
- material: HSS, kobalt-alloyed hss-e, solid carbide
- coatings: TiN, TiAlN, advanced nanocoatings
- coolant option: internal coolant feed where specified
- typical applications: mild steel, high-alloy stainless steel, cast iron, non-ferrous metals, technical plastics, hardened materials (use solid carbide variants)
- tool types available: twist drills, solid carbide drills, indexable drills, centre and pilot drills, step drills
FAQ
What is the difference between hss and solid carbide drill bits?
HSS drill bits offer toughness and resistance to breakage for general machining, while solid carbide drills provide higher wear resistance and are the preferred choice for high-speed, high-volume machining and hardened materials.
Which coatings improve tool life for industrial drilling?
Coatings such as TiN and TiAlN increase surface hardness and thermal stability; when combined with the correct drill geometry and, if available, internal coolant, they significantly extend the service life of drill bits.
Can these drill bits be used on CNC machining centres for deep holes?
Yes. Drill bits designed with optimised flute geometry and internal coolant supply are suited to deep-hole machining on CNC machining centres, ensuring controlled chip evacuation and heat management.
How should I choose between twist drills, solid carbide drills and indexable drills?
Select twist drills for general-purpose drilling, solid carbide drills for high-speed and hardened-material applications, and indexable drills for large-diameter holes where insert changes offer economic advantages.
Why choose Metav for drill bits and drilling solutions?
Metav offers a comprehensive selection of drill bits, twist drills and indexable drills combined with sector expertise, centralised supply from Emmerich and proven reliability across thousands of industrial customers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com