Inspect internal cavities quickly with industrial endoscopes
An industrial endoscope is designed for non‑destructive inspection of hard‑to‑reach cavities, pipes, machine interiors and complex cast parts, enabling visual checks for corrosion, wear, cracks or deposits without dismantling components. It combines a flexible or rigid probe with integrated illumination and optics to relay images to a monitor, and modern digital devices offer high‑resolution chips, adjustable LED lighting and image or video recording for thorough documentation and failure analysis. Using compact probes, articulating camera heads and high‑resolution imaging increases process safety and reduces maintenance costs through early defect detection.
88x78x65mm UHD-4K HD Colour Camera 3840x2160 Capture Mode, C‑Mount, HDMI and USB Output - Euromex
Take advantage of the combination of UHD 4K capture and a Sony 4K sensor for precise visual inspection and reliable documentation; the compact C‑mount design and ready‑to‑use accessory kit reduce setup time and keep production moving. Order the camera directly via Metav Werkzeuge or ask our consultants for tailored integration advice. VC.3042 UHD‑4K HD colour camera — HDMI & USB‑2 outputs by Euromex The VC.3042 is a compact UHD‑4K HD colour inspection camera designed for stereo microscopes and digital imaging tasks in laboratory and quality‑control environments. UHD 4K capture at 3840x2160 Sony 4K sensor for high sensitivity HDMI and USB‑2 digital outputs Includes calibration slide and adapters Sharper images for clearer decisions Equipped with a Sony 4K sensor and UHD 4K capture mode at 3840x2160, the camera delivers image detail that supports fast defect detection and precise documentation. The native 8.3 MP resolution, combined with a 0.5x magnification option, produces images that reveal surface features and fine structures, enabling accurate visual inspection and reliable archival of findings. As a result, measurement tasks and visual assessments become more consistent, reducing repeat inspections and improving throughput. Seamless integration into existing workflows With both HDMI and USB‑2 outputs and a standard C‑mount, the camera integrates into microscopy stations, monitor setups and imaging chains without extensive modification. Compatibility with Windows 10/11 and Mac OS ensures that capture software, file transfer and basic analysis operate on common platforms. The included Wi‑Fi dongle, 16GB SD‑card and essential adapters minimise initial purchases and allow immediate use for documentation, remote review and simple record keeping. Reliable imaging under varied conditions A progressive scan sensor with rolling shutter, combined with exposure auto/manual control and white balance ROI, provides consistent colour rendition and stable frame capture in changing light. The device sensitivity of 505 mV/lux‑sec and 36 bits colour depth support faithful colour reproduction for critical inspections, while a measured noise level of 40.5 dB keeps image quality usable in sensitive applications. Rated for operation between −10 to 50°C and 30–80% humidity, the camera remains dependable in typical workshop and laboratory climates. Ready for calibration and immediate inspection The delivery scope includes adapters for stereo microscopes, power and connection cables, a calibration slide (76 x 24 mm, 1 mm/100), and a 16GB SD‑card, so set‑up time is minimised and traceable imaging can begin straight away. The compact form factor and C‑mount design, together with the supplied accessories, simplify installation on inspection rigs and ensure repeatable positioning for comparative imaging across batches. With clear documentation included, the unit supports both routine checks and detailed reporting. Contact Metav Werkzeuge for expert guidance on integrating the Euromex VC.3042 into inspection workflows and for reliable supply from our Emmerich depot. Technical Data Article number: VC.3042 Type: UHD‑4K, HD colour camera Format: 1/1.8", HDTV 1080p Sensor: Sony 4K Mount: C‑mount Dimensions: 88 x 78 x 65 mm Data output: Digital HDMI and USB‑2 Power supply: 100–240 Vac to 12 Vdc / 1 A Operating temperature: −10 to 50°C Humidity: 30–80% Noise level: 40.5 dB Resolution (capture mode): 3840 x 2160 Resolution: 8.3 MP Facts Capture resolution: 3840x2160 pixels Sensor sensitivity: 505 mV/lux‑sec Colour depth: 36 bits Magnification factor: 0.5x Dimensions: 88 x 78 x 65 mm Supply voltage: 100–240 Vac → 12 Vdc / 1 A Ambient range: −10 to 50°C, 30–80% RH Special features Progressive scan, rolling shutter Exposure: automatic and manual White balance: auto, manual, ROI Interfaces: HDMI and USB‑2, Wi‑Fi dongle included Supplied accessories: 30 mm & 30.5 mm adapters, 12V power adapter, HDMI cable, USB mouse, 16GB SD‑card, Wi‑Fi dongle, USB‑2 cable (plug‑to‑plug), calibration slide (76 x 24 mm, 1 mm/100), user manual Compatible with stereo microscopes (C‑mount) Ready for inspection, documentation and basic measurement tasks FAQ What interfaces are available for live viewing and capture? The Euromex VC.3042 provides HDMI and USB‑2 outputs for direct monitor connection and PC capture; a Wi‑Fi dongle and SD‑card are included for flexible recording. Is the camera compatible with common stereo microscopes? Yes, the camera uses a C‑mount interface and includes 30 mm and 30.5 mm adapters for many stereo microscopes, making integration straightforward. Can the camera produce calibrated images suitable for measurement? The VC.3042 is supplied with a calibration slide (76 x 24 mm, 1 mm/100) to support scale calibration and consistent documentation for inspection tasks. Which operating systems are supported for image capture software? The camera is compatible with Windows 10/11 and Mac OS for capture and basic image transfer workflows. How does the camera perform in low light or bright field conditions? With a sensitivity of 505 mV/lux‑sec, selectable exposure modes and 36 bits colour depth, the camera maintains usable image quality across a wide range of lighting conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9mm Camera Probe With Dimmable White LED Illumination, 12.7–305mm Depth, 60° Field Of View, IP67 - Metav IndustryLine
Compact 9 mm diameter and IP67 protection combined with a 1,000 mm reach deliver reliable access to confined inspection spaces while maintaining robust environmental resistance; order the camera probe directly via Metav Werkzeuge or consult our specialists for application advice. M503.176.1 Camera probe – 9 mm diameter, IP67 inspection camera (Metav IndustryLine) M503.176.1 is a compact camera probe for photo‑video endoscopy, designed for narrow‑bore inspections and long‑reach visual checks in industrial and workshop environments. Slim 9 mm probe diameter Dimmable white LED illumination Wide observation depth 12.7–305 mm IP67 dust and water protection Precision access for narrow bores and long reach The 9 mm diameter housing offers a balance between minimal invasiveness and on‑board optics, allowing inspections of tight cavities, pipe interiors and assembly gaps where larger heads cannot enter. With a 1,000 mm length and a total weight of 0.2 kg, the probe provides extended reach without excessive operator fatigue. The slim profile reduces the risk of scratching internal surfaces while the lightweight construction supports handheld manoeuvrability and longer inspection cycles with minimal strain. Compatibility with existing inspection fixtures is supported: the probe is listed as suitable for use with M503.171.0 and M503.172.0 accessories, enabling integration into established workflows. Sharp images and adaptable lighting for reliable decisions Optical characteristics such as a 50 mm focal length, a 60° field of view and a working range of 12.7–305 mm ensure clear imaging across a useful depth gradient. The specified observation depth (working distance) means the camera will maintain focus for both close‑up detail checks and mid‑range component surveys without constant refocusing. Integrated dimmable white LEDs deliver controllable illumination so contrasts and surface conditions are revealed consistently; dimming prevents overexposure in reflective assemblies and preserves critical visual detail. These attributes translate into faster defect detection and fewer repeat inspections — a direct gain in throughput for maintenance and quality assurance operations. Robust design built for industrial conditions Rated IP67, the probe is dust‑tight and protected against temporary immersion, which suits applications in harsh or wet environments such as rinsing stations, engine bays and pipework. The sealed design helps prevent contamination of optics during routine use and supports cleaning procedures common in industrial settings. The housing and connector interfaces are engineered for workshop resilience while retaining precision optics; this combination reduces downtime caused by fragile inspection tools. The product is packaged and identified by SKU M503.176.1 and integrates into optical equipment lines categorised under industry standard eClass identifiers for simple procurement and inventory handling. How the probe improves inspection workflows By combining compact geometry, a long working reach and adaptable illumination, the device enables faster inspections with fewer tool changes. The probe’s specifications support repeatable visual records for quality documentation and simplify comparisons between inspection runs. For procurement teams and workshop managers the practical benefits are clear: reduced handling complexity, improved access to hidden areas and consistent image quality for assessment and reporting. The device is presented under the Metav IndustryLine portfolio, which emphasises readiness for industrial use and straightforward integration into a shopfloor inspection regime. Choose the Metav IndustryLine camera probe for dependable inspection access and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored technical advice and ordering Technical data Article number: M503.176.1 GTIN: 4054469167770 Manufacturer: Metav IndustryLine Core specifications Diameter: 9 mm Length: 1,000 mm Weight: 0.2 kg Observation depth: 12.7–305 mm Focal length: 50 mm Field of view / angle: 60° Protection rating: IP67 Special features Dimmable white LED illumination Compatible with M503.171.0 and M503.172.0 eClass: 21059058 Customs tariff number: 85229080 Category: Optik FAQ What environments is this probe suitable for? The camera probe M503.176.1 (Metav IndustryLine) is rated IP67, making it suitable for dusty and temporarily submerged environments typical of workshop and industrial inspection tasks. What is the usable working distance and how does it affect imaging? The working range of 12.7–305 mm provides focused imaging from close detail work to mid‑range component checks; this range ensures both fine defect detection and broader area surveys without frequent refocusing. Can the probe be integrated with existing inspection fixtures? Yes — the probe is listed as compatible with M503.171.0 and M503.172.0 accessories, allowing straightforward integration into established inspection setups and fixtures in the Metav product family. How is illumination controlled for reflective or dark surfaces? Integrated dimmable white LEDs allow the lighting intensity to be adjusted to match surface reflectivity and ambient conditions, reducing glare and improving contrast for reliable visual evaluation. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9mm Camera Probe with Dimmable White LED, 12.7–305mm Depth, IP67 - Metav IndustryLine
Take advantage of a compact design, IP67 protection and adjustable white-light illumination to inspect confined spaces reliably; the combination of 9 mm diameter, wide depth range and IP rating supports repeatable checks in production. Order the camera probe directly via Metav Werkzeuge or consult our specialists for configuration advice. Camera probe M503.176.4 — compact video endoscope probe with IP67 and dimmable LEDs (Metav IndustryLine) The Camera probe M503.176.4 is a robust video endoscope probe for internal visual inspection in assemblies, ducts and confined components, designed for industrial inspection and maintenance tasks. Compact 9 mm probe diameter Dimmable white LED illumination IP67-rated for dust and water protection 60° viewing angle, 12.7–305 mm depth Precise imaging where access is limited A slim probe body and focused optics enable clear visual checks in narrow bores and tight cavities. The slender 9 mm diameter combined with a focal field spanning 12.7–305 mm allows for both near and medium-range inspection without changing optics, reducing stoppages. The optical design with a 50 focal setting balances depth of field and detail resolution so that defects, assembly misalignments or foreign objects become identifiable at speed. This precision supports faster non‑destructive assessment and fewer reworks, improving throughput. Durable performance under industrial conditions Rated IP67, the probe tolerates dust ingress and temporary immersion, making it suitable for workshops and production environments where contamination or splash exposure occurs. Integrated dimmable white LEDs provide adaptable illumination, preventing overexposure on reflective surfaces and enabling consistent image contrast across materials. The 60° viewing angle captures broader fields without moving the probe excessively, while a 3 m cable length gives practical reach to inspection points. Together, these attributes ensure reliable, repeatable inspections that contribute to measurable quality control. Integration into inspection workflows and decision processes The probe is conceived as part of a practical inspection setup and interfaces with photo‑video endoscope systems to deliver live imaging for documentation and analysis. With a native resolution of 640×480 and standard video output, recorded sequences can be archived for traceability or forwarded to colleagues for rapid assessment. Compatibility with Metav inspection components and clearly documented identifiers such as SKU M503.176.4 and GTIN support streamlined procurement and asset tracking. For workshops seeking greater inspection coverage without complex retrofits, this probe offers a balanced solution between accessibility, robustness and imaging utility. For a tailored inspection setup or to discuss suitability for specific applications, contact Metav Werkzeuge in Emmerich to review the Metav IndustryLine camera probe M503.176.4 and receive hands‑on advice from our product specialists. Technical Data SKU: M503.176.4 GTIN: 4054469167923 Eclass: 21059058 Tariff code: 85229080 IP protection: IP 67 Diameter: 9 mm Viewing angle: 60° Depth of field: 12.7–305 mm Focal length: 50 Cable length: 3000 mm Illumination: dimmable white LEDs Resolution: 640×480 Numbers / Core technical data Diameter: 9 mm Cable length: 3 000 mm Viewing angle: 60° Depth of field: 12.7–305 mm Resolution: 640 × 480 pixels Special features IP67 ingress protection Dimmable white-light LED illumination Designed for photo-video endoscope use Suitable for integration with Metav inspection systems (see SKU) FAQ What environments is the probe suitable for? The probe’s IP67 rating makes the Metav IndustryLine video endoscope suitable for dusty workshops and locations where temporary water exposure may occur, allowing inspections in harsher production settings. What is the effective inspection range? The optical system provides a working range from 12.7 mm to 305 mm, enabling both close‑up checks and medium‑distance inspections with a 60° field of view for broader coverage. Can the illumination be adjusted to prevent glare? Yes, the integrated dimmable white LEDs enable fine control of light output to avoid reflections and to tailor contrast for different surface finishes and materials. What are the probe dimensions and reach? The probe measures 9 mm in diameter and is supplied with a 3 m cable, offering access to confined areas while maintaining a practical operating length. How is image quality recorded or reviewed? The probe delivers standard video output at 640×480 resolution suitable for live inspection, documentation and subsequent review within common inspection workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9mm Camera Probe With Dimmable White LED, 12.7–305mm Focus Range, 60° View Angle, IP67 - Metav IndustryLine
Take advantage of a compact inspection head and robust protection rating for dependable in‑place visual checks. The combination of dimmable white LEDs and a 9 mm probe diameter enables clear imaging in tight assemblies while IP67 protection keeps the unit operational in harsh environments. Order the camera probe directly via Metav Werkzeuge or consult the technical team for application advice. Kamerasonde M503.176.3 — camera probe with dimmable white LEDs and IP67 protection The Kamerasonde M503.176.3 is a camera probe designed for photo‑video endoscope applications, optimised for visual inspection of confined components and assemblies. Dimmable white LED illumination 9 mm probe head for tight spaces IP67 protection for industrial use 3 m flexible cable for extended reach Reliable imaging in confined spaces for faster inspections The camera probe delivers a focused inspection capability from very close range through to a medium working distance thanks to a focal length of 50 mm and a depth of field of 12.7–305 mm. The 60° field of view balances situational awareness with detail, allowing clear capture of features without frequent repositioning. Integrated dimmable white LEDs provide adaptable illumination for variable surface finishes; lowering light intensity reduces glare on reflective parts, while higher output reveals textures and defects. This combination shortens inspection cycles and reduces the need for secondary checks. Built to withstand shop‑floor conditions and maintain uptime Robustness is a key contributor to reliable production flow. With an IP67 rating the probe head resists dust ingress and temporary immersion, making it suitable for workshop environments where exposure to coolant mist or particulate is likely. The unit weighs approximately 0.5 kg and is supplied with a 3 m connection, offering sufficient reach without excess bulk. These characteristics support continuous use during maintenance rounds and in‑process inspections, helping to avoid unexpected downtime and maintain quality control routines. Simple handling and clear image results for diverse applications The probe produces usable video at a resolution of 640 x 480 and connects into standard photo‑video endoscope setups; brightness is adjustable via the integrated LED control to match material reflectivity. The small 9 mm head accesses narrow bores and cavities that larger optics cannot, while the broad depth range reduces the need for minute focusing adjustments. The unit is listed under the optics category and is compatible with related system components, facilitating straightforward integration into existing inspection toolsets and reducing setup time for repetitive tasks. For reliable, compact inspections with a proven industrial probe, order the Kamerasonde M503.176.3 from Metav Werkzeuge or contact the Metav technical team in Emmerich for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M503.176.3 GTIN: 4054469167787 Manufacturer: Metav IndustryLine Numbers / Core technical data Diameter: 9 mm Cable length: 3 000 mm Weight: 0.5 kg Focal length: 50 mm Depth of field: 12.7–305 mm Field of view: 60° Resolution: 640 x 480 IP rating: IP 67 ECLASS: 21059058 Customs tariff number: 85229080 Designs / Special features Dimmable white LED illumination Intended for photo‑video endoscope use Suitable for tight cavities and bores Compatible with M503.171.0 / M503.172.0 Category: Optik Image assets available FAQ What environments is the probe suited for? The Kamerasonde M503.176.3 is designed for industrial environments and carries an IP67 rating, making the probe head resistant to dust and temporary immersion. What visual range can be expected from the probe? With a focal length of 50 mm and a depth of field from 12.7 to 305 mm, the probe provides usable imaging from very close‑up to several hundred millimetres for component inspection. Can the illumination be adjusted for reflective materials? Yes, the dimmable white LEDs on the camera probe allow brightness control to reduce glare on reflective surfaces and improve defect visibility. Is the probe compatible with existing endoscope systems? The unit is intended for photo‑video endoscope applications and is compatible with associated system components; check compatibility with models M503.171.0 and M503.172.0 where applicable. How long is the probe cable and how does that affect handling? The probe is supplied with a 3 m cable, providing reach for most bench and in‑situ inspections while maintaining manageable handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9mm Camera Probe With Dimmable White LED, 50mm Focus, 12.7–305mm Depth, 60° FOV, IP67 - Metav IndustryLine
Compact, watertight inspection capability with dependable illumination: the combination of a 9 mm probe tip, IP67 protection and a 1,000 mm reach delivers repeatable access to confined spaces and reduces inspection downtime. Order the probe directly via Metav Werkzeuge or contact our consultants for application advice. Camera probe M503.176.2 — 9 mm diameter, IP67-rated inspection head (Metav IndustryLine) A compact camera probe M503.176.2 designed for close-up visual inspection in tight, wet or dusty environments, ideal for bores, assemblies and maintenance tasks 9 mm diameter for confined inspections IP67 protection for wet and dusty environments Dimmable white LED illumination 1,000 mm flexible probe length Precise access where space is limited The slim 9 mm probe head allows direct visual access into narrow bores, ducts and machine cavities that larger cameras cannot reach. By combining a small profile with a measured focal design, the unit keeps the image stable even in restricted geometries, which helps to reduce the number of repeat inspections and shortens fault-finding cycles. The compact construction is particularly beneficial for service engineers and maintenance teams who routinely inspect engines, valves or mould cavities and require consistent, readable images from hard-to-reach areas. Robust protection for workshop conditions Built for use in demanding environments, the inspection head carries an IP67 rating that protects against dust ingress and temporary immersion. The sealed design prevents contamination from coolant, cutting fluids or workshop dust, preserving optics and electronics and extending service intervals. With a 1,000 mm probe length, the assembly balances reach and handling: long enough for deeper inspections yet still manageable from a single attachment point, which supports quicker checks on assemblies without complex fixtures. Illumination and image geometry tuned for clarity Integrated dimmable white-light LEDs offer controllable lighting to match surface reflectivity and working distance, preventing overexposure on shiny metals and improving contrast on matt surfaces. The imaging chain with 640x480 resolution, combined with a depth of field 12.7–305 mm and a 50 mm focal length, provides a useful compromise between close-up detail and usable working distance. These characteristics ensure that features such as burrs, wear patterns or seal defects become visible without constant refocusing, which increases inspection throughput and decision confidence. Field-ready optics and practical integration A 60° viewing angle offers a wide observation cone that captures relevant context around a defect while still resolving fine detail at the centre of the image. The probe is supplied ready for integration with compatible inspection rigs and accessories and is marked for compatibility with referenced tooling where indicated. This flexibility supports diverse use cases, from assembly-line checks to portable service kits, enabling teams to adapt the probe to existing workflows and minimise additional equipment investment. Contact Metav Werkzeuge today for tailored advice and to arrange supply of the M503.176.2 camera probe through Metav Werkzeuge’s direct order channels Technical Data Article number: M503.176.2 GTIN: 4054469167916 ECLASS: 21059058 TARIC/Customs code: 85229080 Facts Probe length: 1,000 mm Probe diameter: 9 mm Viewing angle: 60° Focal length: 50 mm Depth of field: 12.7–305 mm Resolution: 640x480 IP protection: IP 67 Special features Dimmable white-light LED illumination Compatible with M503.173.0 Category: Optik FAQ What environments is the camera probe suited to? The camera probe M503.176.2 is designed for industrial environments and carries an IP 67 rating, making it suitable for dusty workshops and conditions with temporary immersion. Can the lighting be adjusted for reflective surfaces? Yes, the dimmable white-light LEDs allow illumination to be reduced or increased to avoid glare on reflective metals and to enhance contrast on dull surfaces. What inspection distances are supported by the optics? Optical design provides a usable depth of field from 12.7–305 mm, which supports both close-up detail work and slightly longer-range inspections without the need for frequent refocusing. Is the probe compatible with other inspection accessories? The probe is marked as compatible with referenced tooling entries (e.g., M503.173.0) and can be integrated into existing inspection rigs or portable kits where mechanical interfaces match. Which features make this probe suitable for maintenance teams? Maintenance teams benefit from the slim 9 mm diameter for confined access, the 1,000 mm reach for deeper inspections, and the sealed IP 67 construction that tolerates typical workshop contaminants. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9mm Inspection Endoscope With Removable Wireless 5" LCD Monitor, 128MB Internal Storage, SD Slot, Rechargeable Battery - Metav IndustryLine
Take advantage of the combination of portable wireless transmission, a slim 9 mm probe and a detachable 5″ colour monitor to speed up fault finding and reduce inspection time; order through Metav Werkzeuge or consult their advisors for further assistance. Photo‑video endoscope M503.173.5 — 9 mm probe, removable 5″ wireless colour monitor (Metav IndustryLine) The Photo‑video endoscope M503.173.5 is a portable inspection camera designed for visual checks in confined spaces such as cavities and pipes, supplied with a detachable wireless 5″ colour monitor for immediate on‑site assessment. 9 mm inspection probe for confined spaces Removable 5″ LCD colour monitor with 4× zoom Wireless 2.4 GHz image transmission, up to 10 m Internal 128 MB memory plus SD card slot for images Fast, clear inspection where access is limited The 9 mm probe combined with a detachable 5″ colour monitor creates a compact, mobile solution for rapid visual inspection. Wireless transmission over 2.4 GHz to the monitor (range up to 10 m) removes cable clutter and permits work in awkward environments; the monitor supports digital zoom (1×–4×) and 180° image rotation, enabling quick orientation and detailed checks of suspect areas. Adjustable LED illumination at the probe tip ensures usable images even in poorly lit cavities, so reports and initial diagnoses can be produced on the spot without lengthy set‑ups. Secure recording, simple transfer and dependable power Integrated 128 MB internal memory and an SD card slot allow photos and video to be stored and transferred for documentation and traceability; an SD card is not included. The unit uses a rechargeable lithium battery with a mains adaptor for continuous operation and straightforward recharging between inspections. These features support efficient workflows in maintenance and service routines: images can be archived for quality records or forwarded to colleagues for immediate assessment, reducing error‑prone guesswork and repeated inspections. Practical design for workshop and field use With a 3 000 mm flexible insertion length and a slim 9 mm diameter, the probe reaches deep or narrow passages commonly encountered in vehicle engines, drainage systems and building services. The camera delivers a clear 800 × 480 display resolution on the detachable monitor, while wireless capability and a lightweight monitor enhance manoeuvrability during inspections. The construction suits routine diagnostic tasks in automotive and construction environments, streamlining fault localisation and shortening downtime through quicker decision making and better visual evidence. For reliable mobile inspections with Metav IndustryLine’s wireless photo‑video endoscope, contact Metav Werkzeuge for ordering and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M503.173.5 GTIN: 4054469167572 eClass: 21059058 Tariff number: 85219000 Core specifications Probe diameter: 9 mm Insertion length: 3 000 mm Display: removable 5″ LCD colour monitor Display resolution: 800 × 480 px Wireless transmission: 2.4 GHz, range up to 10 m Digital zoom: 1×–4× Image rotation: 180° Internal memory: 128 MB SD card slot: yes (SD card not included) Power: rechargeable lithium battery and mains adaptor Features and functions Adjustable LED illumination at probe tip Photo and video capture and storage Removable monitor for team viewing or separate use Suitable for inspections in automotive and construction applications Wireless image transfer to detachable monitor SD card slot for simple file export FAQ What is the diameter of the inspection probe? The Metav IndustryLine photo‑video endoscope M503.173.5 features a 9 mm probe suitable for confined and narrow access inspections. How is the image transmitted and viewed? The Metav IndustryLine photo‑video endoscope M503.173.5 transmits images wirelessly over 2.4 GHz to the detachable 5″ colour monitor, with a maximum practical range of about 10 m and selectable digital zoom. Can images and video be stored and exported? Yes. The Metav IndustryLine photo‑video endoscope M503.173.5 provides 128 MB internal memory and an SD card slot for storing photos and video; an SD card is not supplied with the unit. What powers the inspection camera and how long can it run? The Metav IndustryLine photo‑video endoscope M503.173.5 is powered by a rechargeable lithium battery and can be charged via the supplied mains adaptor for continuous or repeated inspection sessions. Which applications suit this inspection tool best? The Metav IndustryLine photo‑video endoscope M503.173.5 is ideal for quick visual inspection of hard‑to‑reach areas such as cavities and pipes in automotive maintenance, building services and general on‑site diagnostics. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Cable Ø5.5mm Camera Head Accessory With Screw-On Ring, Magnet, Hook Or 90° Mirror Attachment - Metav IndustryLine
Benefit from flexible inspection options with screw‑on ring, magnet, hook and 90° mirror attachments and a compact connection suited to Ø5.5 mm cables; this combination supports consistent imaging in tight or awkward positions. Order the accessory directly via Metav Werkzeuge or consult our advisors for compatibility details. Accessory for photo‑video endoscope M503.179.1 — Metav IndustryLine, screw‑on multi‑adapter for inspection optics A versatile Accessory for photo‑video endoscope M503.179.1 designed to adapt a camera head for confined inspections by accepting multiple screw‑on attachments and standard cable diameters, extending the scope of visual checks in maintenance and quality control. Screw‑on ring attachment for stabilised optics Magnet adapter for ferrous surfaces Hook attachment for retrieval or positioning 90° mirror for lateral viewing capability Flexible attachments for confined inspection tasks The accessory offers a selection of screw‑on interfaces — ring, magnet, hook and 90° mirror — which convert a single camera head into a multi‑purpose inspection tool. This modular approach reduces the need for multiple specialised cameras by enabling rapid reconfiguration of the optical end for lateral viewing, surface attachment or part manipulation. The result is a more efficient workflow and fewer instrument changes during troubleshooting or assembly checks. Consistent connectivity and reliable imaging in tight spaces Designed for compatibility with a compact cable connection of Ø5.5 mm, the adapter maintains a secure link between the camera and recording unit, reducing signal noise and mechanical play. The robust mechanical interface ensures repeatable alignment of the optical axis when switching between attachments, which supports consistent image capture and simplifies comparison of inspection records across several components or process runs. Built for workshop durability and straightforward integration Constructed for practical use in inspection and service environments, the adapter screws securely to standard camera heads and resists frequent handling. The ability to fit several mounted accessories means fewer tool changes and less downtime when inspecting assemblies, weld seams or internal passages. The modular design also facilitates straightforward storage and transport within existing inspection kits, supporting a more productive inspection routine. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine accessory M503.179.1 with existing inspection systems and to confirm fitment and delivery from Emmerich Technical data SKU: M503.179.1 GTIN: 4054469167855 ECLASS: 34590192 HS code: 85229080 Manufacturer brand: Metav IndustryLine Facts Cable diameter compatibility: Ø5.5 mm Type designation: 1+3 Category: Optics Image asset available: yes Special features Ring, magnet, hook or 90° mirror attachments screwable on the camera head Suitable for photo‑video endoscope applications Compact connector for tight‑space inspections FAQ What attachments are available for the accessory and how do they mount? The accessory for photo‑video endoscope M503.179.1 accepts screw‑on ring, magnet, hook and 90° mirror attachments that fasten directly to the camera head for rapid reconfiguration. Is the adapter compatible with standard endoscope cabling? Yes, the adapter is specified for a cable connection of Ø5.5 mm, ensuring a compact and secure link between camera and recorder for the Metav IndustryLine accessory. Can the accessory be used for lateral inspections inside narrow bores? The 90° mirror attachment enables lateral viewing and is suitable for inspections of confined or offset features when mounted on the camera head. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Flexible Kabel-Verlängerung
Detailinformationen: Hersteller: Metav IndustryLine Bezeichnung: Kabel-Verlängerung flexibel IP-Schutz: IP 67 Durchmesser: 7,8 mm bis 7,8 mm Anschluss: 18 Geeignet für: Foto-Video-Endoskop M503.171.0 und M503.172.0 Gewicht: 0,2 kg - 0,8 kg Länge: 1000 mm bis 4000 mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.
Flexible Kabel-Verlängerung
Detailinformationen: Hersteller: Metav IndustryLine Bezeichnung: Kabel-Verlängerung flexibel IP-Schutz: IP 67 Durchmesser: 7,8 mm bis 7,8 mm Anschluss: 18 Geeignet für: Foto-Video-Endoskop M503.171.0 und M503.172.0 Gewicht: 0,2 kg - 0,8 kg Länge: 1000 mm bis 4000 mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.
Flexible Kabel-Verlängerung
Detailinformationen: Hersteller: Metav IndustryLine Bezeichnung: Kabel-Verlängerung flexibel IP-Schutz: IP 67 Durchmesser: 7,8 mm bis 7,8 mm Anschluss: 18 Geeignet für: Foto-Video-Endoskop M503.171.0 und M503.172.0 Gewicht: 0,2 kg - 0,8 kg Länge: 1000 mm bis 4000 mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.
Flexible Kabel-Verlängerung
Detailinformationen: Hersteller: Metav IndustryLine Bezeichnung: Kabel-Verlängerung flexibel IP-Schutz: IP 67 Durchmesser: 7,8 mm bis 7,8 mm Anschluss: 18 Geeignet für: Foto-Video-Endoskop M503.171.0 und M503.172.0 Gewicht: 0,2 kg - 0,8 kg Länge: 1000 mm bis 4000 mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.
Foto-Video-Endoskop mit 3,5" LCD-Farbmonitor
Detailinformationen: Hersteller: Metav IndustryLine Bezeichnung: Foto-Video-Endoskop mit 3,5" LCD-Farbmonitor Auslieferung im Kasten/Behältnis Durchmesser: 5,5 mm bis 12 mm Digitalanzeige: 3,5” LCD Farbmonitor, digitaler Zoom (1x - 2x) und Bild-Drehung (180°) Auflösung: 320x240 Pixel Aufnahme: 12 bis 9 Batterie: 9 V Blockbatterie Geeignet für: ideal für schnelle, visuelle Überprüfung an schwer zugänglichen Stellen z.B. Hohlräumen und Rohren in der Automechanik und im Bauwesen Gewicht: 2 kg Länge: 1000 mm - 3000 mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.
Foto-Video-Endoskop mit 3,5" LCD-Farbmonitor
Detailinformationen: Hersteller: Metav IndustryLine Bezeichnung: Foto-Video-Endoskop mit 3,5" LCD-Farbmonitor Auslieferung im Kasten/Behältnis Durchmesser: 5,5 mm bis 12 mm Digitalanzeige: 3,5” LCD Farbmonitor, digitaler Zoom (1x - 2x) und Bild-Drehung (180°) Auflösung: 320x240 Pixel Aufnahme: 12 bis 9 Batterie: 9 V Blockbatterie Geeignet für: ideal für schnelle, visuelle Überprüfung an schwer zugänglichen Stellen z.B. Hohlräumen und Rohren in der Automechanik und im Bauwesen Gewicht: 2 kg Länge: 1000 mm - 3000 mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.
Foto-Video-Endoskop mit 3,5" LCD-Farbmonitor
Detailinformationen: Hersteller: Metav IndustryLine Bezeichnung: Foto-Video-Endoskop mit 3,5" LCD-Farbmonitor Auslieferung im Kasten/Behältnis Durchmesser: 5,5 mm bis 12 mm Digitalanzeige: 3,5” LCD Farbmonitor, digitaler Zoom (1x - 2x) und Bild-Drehung (180°) Auflösung: 320x240 Pixel Aufnahme: 12 bis 9 Batterie: 9 V Blockbatterie Geeignet für: ideal für schnelle, visuelle Überprüfung an schwer zugänglichen Stellen z.B. Hohlräumen und Rohren in der Automechanik und im Bauwesen Gewicht: 2 kg Länge: 1000 mm - 3000 mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.
Foto-Video-Endoskop mit 3,5" LCD-Farbmonitor
Detailinformationen: Hersteller: Metav IndustryLine Bezeichnung: Foto-Video-Endoskop mit 3,5" LCD-Farbmonitor Auslieferung im Kasten/Behältnis Durchmesser: 5,5 mm bis 12 mm Digitalanzeige: 3,5” LCD Farbmonitor, digitaler Zoom (1x - 2x) und Bild-Drehung (180°) Auflösung: 320x240 Pixel Aufnahme: 12 bis 9 Batterie: 9 V Blockbatterie Geeignet für: ideal für schnelle, visuelle Überprüfung an schwer zugänglichen Stellen z.B. Hohlräumen und Rohren in der Automechanik und im Bauwesen Gewicht: 2 kg Länge: 1000 mm - 3000 mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.
Foto-Video-Endoskop mit 3,5" LCD-Farbmonitor
Detailinformationen: Hersteller: Metav IndustryLine Bezeichnung: Foto-Video-Endoskop mit 3,5" LCD-Farbmonitor Auslieferung im Kasten/Behältnis Durchmesser: 5,5 mm bis 12 mm Digitalanzeige: 3,5” LCD Farbmonitor, digitaler Zoom (1x - 2x) und Bild-Drehung (180°) Auflösung: 320x240 Pixel Aufnahme: 12 bis 9 Batterie: 9 V Blockbatterie Geeignet für: ideal für schnelle, visuelle Überprüfung an schwer zugänglichen Stellen z.B. Hohlräumen und Rohren in der Automechanik und im Bauwesen Gewicht: 2 kg Länge: 1000 mm - 3000 mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.
Foto-Video-Endoskop mit 3,5" LCD-Farbmonitor
Detailinformationen: Hersteller: Metav IndustryLine Bezeichnung: Foto-Video-Endoskop mit 3,5" LCD-Farbmonitor Auslieferung im Kasten/Behältnis Durchmesser: 5,5 mm bis 12 mm Digitalanzeige: 3,5” LCD Farbmonitor, digitaler Zoom (1x - 2x) und Bild-Drehung (180°) Auflösung: 320x240 Pixel Aufnahme: 12 bis 9 Batterie: 9 V Blockbatterie Geeignet für: ideal für schnelle, visuelle Überprüfung an schwer zugänglichen Stellen z.B. Hohlräumen und Rohren in der Automechanik und im Bauwesen Gewicht: 2 kg Länge: 1000 mm - 3000 mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.
Foto-Video-Endoskop mit 3,5" LCD-Farbmonitor
Detailinformationen: Hersteller: Metav IndustryLine Bezeichnung: Foto-Video-Endoskop mit 3,5" LCD-Farbmonitor Auslieferung im Kasten/Behältnis Durchmesser: 5,5 mm bis 12 mm Digitalanzeige: 3,5” LCD Farbmonitor, digitaler Zoom (1x - 2x) und Bild-Drehung (180°) Auflösung: 320x240 Pixel Aufnahme: 12 bis 9 Batterie: 9 V Blockbatterie Geeignet für: ideal für schnelle, visuelle Überprüfung an schwer zugänglichen Stellen z.B. Hohlräumen und Rohren in der Automechanik und im Bauwesen Gewicht: 2 kg Länge: 1000 mm - 3000 mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.
Foto-Video-Endoskop mit abnehmbarem und drahtlosem LCD-Farbmonitor
Detailinformationen: Hersteller: Metav IndustryLine Bezeichnung: Foto-Video-Endoskop mit abnehmbarem, drahtlosem LCD-Farbmonitor Auslieferung im Kasten/Behältnis Durchmesser: 5,5 mm bis 12 mm Digitalanzeige: abnehmbarer 3,5” LCD Farbmonitor, digitaler Zoom (1x - 4x) und Bild-Drehung (180°), mit Einstelltasten für LED-Leuchten oder abnehmbarer 5” LCD Farbmonitor, digitaler Zoom (1x - 4x) und Bild-Drehung (180°), mit Einstelltasten für LED-Leuchten je nach Ausführung Auflösung: 320x240 Pixel bis 800x480 Pixel Aufnahme: 12 bis 9 Batterie: Wiederaufladbarer Lithium-Batterie und Netzteil Besonderheit: Interner Speicher 128 MB und Slot für SD-Speicherkarte zum Speichern sowie Übertragen von Fotos und Video (SD-Karte nicht im Lieferumfang) oder mit SD-Speicherkarte 2 GB zum Speichern sowie Übertragung von Fotos und Video je nach Ausführung Geeignet für: ideal für schnelle, visuelle Überprüfung an schwer zugänglichen Stellen z.B. Hohlräumen und Rohren in der Automechanik und im Bauwesen Gewicht: 1,8 kg bis 2 kg Länge: 1000 mm bis 3000 mm Datenausgang: Drahtlose Bildübertragung per 2.4 GHz Funk zum Farbmonitor, max. Reichweite 10 m Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.
Foto-Video-Endoskop mit abnehmbarem und drahtlosem LCD-Farbmonitor
Detailinformationen: Hersteller: Metav IndustryLine Bezeichnung: Foto-Video-Endoskop mit abnehmbarem, drahtlosem LCD-Farbmonitor Auslieferung im Kasten/Behältnis Durchmesser: 5,5 mm bis 12 mm Digitalanzeige: abnehmbarer 3,5” LCD Farbmonitor, digitaler Zoom (1x - 4x) und Bild-Drehung (180°), mit Einstelltasten für LED-Leuchten oder abnehmbarer 5” LCD Farbmonitor, digitaler Zoom (1x - 4x) und Bild-Drehung (180°), mit Einstelltasten für LED-Leuchten je nach Ausführung Auflösung: 320x240 Pixel bis 800x480 Pixel Aufnahme: 12 bis 9 Batterie: Wiederaufladbarer Lithium-Batterie und Netzteil Besonderheit: Interner Speicher 128 MB und Slot für SD-Speicherkarte zum Speichern sowie Übertragen von Fotos und Video (SD-Karte nicht im Lieferumfang) oder mit SD-Speicherkarte 2 GB zum Speichern sowie Übertragung von Fotos und Video je nach Ausführung Geeignet für: ideal für schnelle, visuelle Überprüfung an schwer zugänglichen Stellen z.B. Hohlräumen und Rohren in der Automechanik und im Bauwesen Gewicht: 1,8 kg bis 2 kg Länge: 1000 mm bis 3000 mm Datenausgang: Drahtlose Bildübertragung per 2.4 GHz Funk zum Farbmonitor, max. Reichweite 10 m Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.
Foto-Video-Endoskop mit abnehmbarem und drahtlosem LCD-Farbmonitor
Detailinformationen: Hersteller: Metav IndustryLine Bezeichnung: Foto-Video-Endoskop mit abnehmbarem, drahtlosem LCD-Farbmonitor Auslieferung im Kasten/Behältnis Durchmesser: 5,5 mm bis 12 mm Digitalanzeige: abnehmbarer 3,5” LCD Farbmonitor, digitaler Zoom (1x - 4x) und Bild-Drehung (180°), mit Einstelltasten für LED-Leuchten oder abnehmbarer 5” LCD Farbmonitor, digitaler Zoom (1x - 4x) und Bild-Drehung (180°), mit Einstelltasten für LED-Leuchten je nach Ausführung Auflösung: 320x240 Pixel bis 800x480 Pixel Aufnahme: 12 bis 9 Batterie: Wiederaufladbarer Lithium-Batterie und Netzteil Besonderheit: Interner Speicher 128 MB und Slot für SD-Speicherkarte zum Speichern sowie Übertragen von Fotos und Video (SD-Karte nicht im Lieferumfang) oder mit SD-Speicherkarte 2 GB zum Speichern sowie Übertragung von Fotos und Video je nach Ausführung Geeignet für: ideal für schnelle, visuelle Überprüfung an schwer zugänglichen Stellen z.B. Hohlräumen und Rohren in der Automechanik und im Bauwesen Gewicht: 1,8 kg bis 2 kg Länge: 1000 mm bis 3000 mm Datenausgang: Drahtlose Bildübertragung per 2.4 GHz Funk zum Farbmonitor, max. Reichweite 10 m Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.
Foto-Video-Endoskop mit abnehmbarem und drahtlosem LCD-Farbmonitor
Detailinformationen: Hersteller: Metav IndustryLine Bezeichnung: Foto-Video-Endoskop mit abnehmbarem, drahtlosem LCD-Farbmonitor Auslieferung im Kasten/Behältnis Durchmesser: 5,5 mm bis 12 mm Digitalanzeige: abnehmbarer 3,5” LCD Farbmonitor, digitaler Zoom (1x - 4x) und Bild-Drehung (180°), mit Einstelltasten für LED-Leuchten oder abnehmbarer 5” LCD Farbmonitor, digitaler Zoom (1x - 4x) und Bild-Drehung (180°), mit Einstelltasten für LED-Leuchten je nach Ausführung Auflösung: 320x240 Pixel bis 800x480 Pixel Aufnahme: 12 bis 9 Batterie: Wiederaufladbarer Lithium-Batterie und Netzteil Besonderheit: Interner Speicher 128 MB und Slot für SD-Speicherkarte zum Speichern sowie Übertragen von Fotos und Video (SD-Karte nicht im Lieferumfang) oder mit SD-Speicherkarte 2 GB zum Speichern sowie Übertragung von Fotos und Video je nach Ausführung Geeignet für: ideal für schnelle, visuelle Überprüfung an schwer zugänglichen Stellen z.B. Hohlräumen und Rohren in der Automechanik und im Bauwesen Gewicht: 1,8 kg bis 2 kg Länge: 1000 mm bis 3000 mm Datenausgang: Drahtlose Bildübertragung per 2.4 GHz Funk zum Farbmonitor, max. Reichweite 10 m Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.
Foto-Video-Endoskop mit abnehmbarem und drahtlosem LCD-Farbmonitor
Detailinformationen: Hersteller: Metav IndustryLine Bezeichnung: Foto-Video-Endoskop mit abnehmbarem, drahtlosem LCD-Farbmonitor Auslieferung im Kasten/Behältnis Durchmesser: 5,5 mm bis 12 mm Digitalanzeige: abnehmbarer 3,5” LCD Farbmonitor, digitaler Zoom (1x - 4x) und Bild-Drehung (180°), mit Einstelltasten für LED-Leuchten oder abnehmbarer 5” LCD Farbmonitor, digitaler Zoom (1x - 4x) und Bild-Drehung (180°), mit Einstelltasten für LED-Leuchten je nach Ausführung Auflösung: 320x240 Pixel bis 800x480 Pixel Aufnahme: 12 bis 9 Batterie: Wiederaufladbarer Lithium-Batterie und Netzteil Besonderheit: Interner Speicher 128 MB und Slot für SD-Speicherkarte zum Speichern sowie Übertragen von Fotos und Video (SD-Karte nicht im Lieferumfang) oder mit SD-Speicherkarte 2 GB zum Speichern sowie Übertragung von Fotos und Video je nach Ausführung Geeignet für: ideal für schnelle, visuelle Überprüfung an schwer zugänglichen Stellen z.B. Hohlräumen und Rohren in der Automechanik und im Bauwesen Gewicht: 1,8 kg bis 2 kg Länge: 1000 mm bis 3000 mm Datenausgang: Drahtlose Bildübertragung per 2.4 GHz Funk zum Farbmonitor, max. Reichweite 10 m Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.
Foto-Video-Endoskop mit abnehmbarem und drahtlosem LCD-Farbmonitor
Detailinformationen: Hersteller: Metav IndustryLine Bezeichnung: Foto-Video-Endoskop mit abnehmbarem, drahtlosem LCD-Farbmonitor Auslieferung im Kasten/Behältnis Durchmesser: 5,5 mm bis 12 mm Digitalanzeige: abnehmbarer 3,5” LCD Farbmonitor, digitaler Zoom (1x - 4x) und Bild-Drehung (180°), mit Einstelltasten für LED-Leuchten oder abnehmbarer 5” LCD Farbmonitor, digitaler Zoom (1x - 4x) und Bild-Drehung (180°), mit Einstelltasten für LED-Leuchten je nach Ausführung Auflösung: 320x240 Pixel bis 800x480 Pixel Aufnahme: 12 bis 9 Batterie: Wiederaufladbarer Lithium-Batterie und Netzteil Besonderheit: Interner Speicher 128 MB und Slot für SD-Speicherkarte zum Speichern sowie Übertragen von Fotos und Video (SD-Karte nicht im Lieferumfang) oder mit SD-Speicherkarte 2 GB zum Speichern sowie Übertragung von Fotos und Video je nach Ausführung Geeignet für: ideal für schnelle, visuelle Überprüfung an schwer zugänglichen Stellen z.B. Hohlräumen und Rohren in der Automechanik und im Bauwesen Gewicht: 1,8 kg bis 2 kg Länge: 1000 mm bis 3000 mm Datenausgang: Drahtlose Bildübertragung per 2.4 GHz Funk zum Farbmonitor, max. Reichweite 10 m Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.
Inspect confined interiors without dismantling parts
An industrial endoscope is an optical inspection device designed for non-destructive testing of hard-to-reach cavities, pipelines, machine interiors and complex castings. It consists of a flexible or rigid probe with integrated lighting and optics that relay images to a monitor or eyepiece, enabling visual assessment without dismantling the component. Using a borescope, inspection camera or videoscope reduces downtime and supports faster, evidence-based maintenance decisions.
How an endoscope supports metallurgy and maintenance workflows
For applications in industrial metallurgy and equipment upkeep, the endoscope allows visual control of internal surfaces for corrosion, wear, cracks or deposits. Modern digital models feature a high-resolution camera chip at the probe tip, adjustable LED lighting and the ability for image and video recording, which enables subsequent documentation and detailed fault analysis. Swivelling camera heads and compact construction permit efficient inspection of branched channels and confined geometries, improving process safety through early detection.
Practical advantages that matter on the shop floor
- Saves dismantling time and reduces production stoppages by enabling in-situ inspection.
- Improves diagnostic accuracy through high-resolution imaging and recorded evidence for traceability.
- Lowers maintenance costs by identifying faults early, extending component service life.
- Enhances accessibility with flexible or rigid probe options and swivelling camera head designs.
- Facilitates compliance and reporting via stored images and video documentation.
Metav as your precision partner for inspection equipment
Metav brings decades of specialist expertise and a wide, curated selection of workshop and measurement technology from its quality-controlled hub in Emmerich. With over 48,000 customers and more than 250,000 products, Metav acts as a reliable supply and technical filter for the European market, making advanced inspection tools such as endoscopes accessible for industry and trade. Choosing Metav means benefiting from consolidated sourcing, consistent product quality and practical guidance for selecting the right inspection camera for your needs.
Summary
An endoscope (borescope / inspection camera / videoscope) lets you inspect internal component surfaces quickly and non-invasively, delivering high-resolution visual data and recorded evidence that reduce downtime and support proactive maintenance.
FAQ
When should I choose a flexible endoscope instead of a rigid one?
Choose a flexible endoscope when access routes are curved or tortuous; a flexible probe and swivelling camera head permit navigation of pipelines and branched channels that a rigid instrument cannot reach.
Can an industrial endoscope record footage for later analysis?
Yes. Many industrial endoscopes offer image and video recording capabilities, allowing captured footage to be reviewed for detailed fault analysis and retained for documentation or compliance purposes.
How does adjustable LED lighting affect inspection results?
Adjustable LED lighting improves contrast and highlights surface defects; fine control over illumination helps to reduce reflections and reveal subtle corrosion, wear or deposits on internal surfaces.
Is an endoscope suitable for inspecting complex cast parts and machine interiors?
An endoscope is well suited to those applications. Its compact optics and probe designs enable visual checks of internal geometries in complex castings and machine housings without component disassembly.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com