6200 g Precision Balance 0.01 g Readability, Stainless Steel Pan 180×160 mm, Vibration‑Resistant Stemma‑Fork System - KERN

Take advantage of a compact, purpose-made accessory that ensures reliable attachment for underfloor weighing systems while keeping installation straightforward. Benefit from proven compatibility with KERN EW‑N / EG‑N scale series and a lightweight design that minimises additional load. Order the EG‑A08 directly via Metav Werkzeuge or ask our consultants if needed. EG‑A08 eyelet for underfloor weighing, compatible with KERN EW‑N / EG‑N The EG‑A08 accessory functions as an eyelet designed for underfloor weighing applications, providing a secure attachment point for KERN EW‑N and EG‑N precision scales in industrial and workshop environments. Accessory for KERN EW‑N / EG‑N scales Designed for underfloor weighing applications Lightweight, space‑saving accessory Secure attachment that supports reliable weighing results The EG‑A08 eyelet provides a dedicated attachment point for underfloor scale installations, helping to maintain stable load transfer from the weighing platform to the instrument. By offering a defined anchor, the accessory reduces the risk of shifting or misalignment during routine use, which in turn supports accurate and repeatable measurements. In industrial metrology contexts, ensuring consistent mechanical contact is a practical way to protect calibration and avoid rework, so the accessory acts as a small but important contributor to process reliability. Space‑efficient design for integration into existing setups Compact and lightweight, the accessory is intended to fit into confined installation spaces common in workshop pit or flush‑mount weighing solutions. The minimal mass keeps added load negligible while the small footprint means the eyelet can be retrofitted without extensive modification to surrounding infrastructure. For technicians planning or upgrading underfloor weighing systems, this compactness simplifies planning and reduces downtime during installation or maintenance. Compatibility and practicality for professional metrology Engineered as an accessory for the KERN EW‑N and EG‑N series, the product emphasises practical compatibility with established precision scales. This focus on fitment allows procurement teams to reduce uncertainty when specifying components for weighing systems. The accessory supports straightforward installation workflows and contributes to an organised, durable weighing setup suited to repetitive industrial use, aligning with the operational demands of manufacturing and quality control environments. Contact Metav Werkzeuge for confirmation of fitment and procurement assistance — reach our advisors at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to secure the KERN accessory for your weighing system. Technical data Article number: EG‑A08 Manufacturer: KERN SKU: EG‑A08 Facts Weight: 0.01 kg GTIN: 4045761028326 HS code: 90160090 Special features Application: underfloor weighing accessory Compatibility: for KERN EW‑N / EG‑N scale series Category: Scales / Accessories Origin: JP FAQ Is this eyelet compatible with KERN EW‑N and EG‑N scales? Yes. The EG‑A08 eyelet is designed for compatibility with the KERN EW‑N and EG‑N series to enable secure underfloor weighing installations. How does the accessory affect weighing accuracy? The accessory provides a stable attachment point that supports consistent load transfer, helping the scale to deliver repeatable and reliable measurement results. Is the eyelet suitable for retrofitting existing underfloor scales? The accessory’s compact and lightweight design allows for straightforward retrofitting into many underfloor weighing setups without major structural changes. What identification is used for ordering this accessory? Order using the article number EG‑A08 or GTIN 4045761028326; the accessory is supplied by KERN and distributed via Metav Werkzeuge. Manufacturer: KERN — Japan; Contact via Metav Werkzeuge: info@metav-werkzeuge.com, +49 2822 7131930

Benefit from the combination of high metrological reliability and a compact, corrosion-resistant design: the 5 kg nominal mass with an 8 mg tolerance and OIML E2 classification supports consistent calibration results and traceable measurement chains. Order the KERN 316-13 calibration weight via Metav Werkzeuge or consult our specialists for tailored delivery and packaging advice. KERN 316-13 – Calibration weight, 5 kg, OIML E2 KERN 316-13 is a compact calibration weight in polished stainless steel for high-precision verification of laboratory and industrial balances OIML E2 accuracy class Nominal mass 5 kg, 8 mg tolerance Polished stainless-steel compact form Cylinder Ø 80 × 132.5 mm dimensions Precision that reduces measurement uncertainty The OIML E2 classification and a nominal mass of 5 kg with an 8 mg tolerance make this reference mass suitable for high-precision verification tasks. Laboratories and quality departments benefit from lower measurement uncertainty and a clear basis for conformity assessments; the strict tolerance range helps to maintain calibration consistency across successive checks. The classification indicates that the weight meets internationally recognised criteria for reference masses, enabling straightforward documentation during internal audits or when demonstrating compliance with calibration schedules. Durable, compact design for routine handling A polished stainless-steel finish combines corrosion resistance with easy maintenance, while the compact form keeps handling and storage straightforward in busy workshops and calibration labs. The cylindrical profile (Ø 80 × 132.5 mm) is optimised for stable placement on balance pans and for safe gripping during transfers. Because the unit is highly precise, use with a protective case is recommended to avoid contamination and surface damage that could affect mass values; suitable cases reduce the risk of wear and help preserve long-term stability. Integrates into traceable calibration workflows As a reference mass from KERN, the item is intended for use within traceable metrological chains and routine calibration procedures. Clear identification via SKU and GTIN supports inventory control and documentation processes, and the German origin provides an additional layer of provenance for procurement records. The combination of OIML E2 accuracy and robust construction means this reference mass is well suited to both in-house verification and preparation for accredited calibration services, simplifying adherence to quality management requirements. For high-accuracy verification with the KERN 316-13, contact Metav Werkzeuge in Emmerich for personalised advice on packaging, delivery and integration into existing calibration routines via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 316 SKU: 316-13 Manufacturer: KERN GTIN: 4045761094949 Tariff number: 84239090 Origin: Germany Facts Nominal mass: 5 kg OIML class: E2 Tolerance (OIML E2): 8 mg Cylinder dimensions: 80 × 132.5 mm (Ø × H) eClass: 32120103 Special features Material: Polished stainless steel Form: Compact form (cylindrical) Recommendation: Use with a protective case for high-accuracy weights FAQ What level of accuracy does this reference mass provide? The KERN 316-13 is specified to OIML E2 class and a tolerance of 8 mg for the 5 kg nominal mass, providing suitability for high-precision verification tasks. Is the material suitable for laboratory environments? Yes, the polished stainless-steel construction of the KERN 316-13 offers corrosion resistance and ease of cleaning, making it appropriate for controlled laboratory and workshop conditions. Are there handling recommendations to preserve accuracy? Avoid direct contact with bare hands, store the weight in a protective case when not in use, and keep it in a stable environment to maintain the calibrated value of the KERN 316-13. Can this weight be used for accreditation or audit documentation? The OIML E2 classification and clear identification support traceability and documentation required for internal audits and calibration records when used as part of an accredited workflow. What makes the compact form advantageous for daily use? The compact cylindrical design (Ø 80 × 132.5 mm) minimises footprint on balance pans, simplifies handling and storage, and aids stable placement during routine calibration checks. KERN; Origin: Germany; Contact: not provided

Take advantage of reliable protection, simple compatibility and ready spare parts to keep weighing tasks uninterrupted; the KERN solution combines practical dust and splash protection with easy replacement planning — order through Metav Werkzeuge or consult our team for compatibility advice. KERN EG-A09S05 Work protection hood for EW/EG precision scales — pack of 5, fits 180 × 160 mm The EG-A09S05 work protection hood shields keyboards and enclosures on compatible precision scales, suited to laboratory and workshop weighing tasks KERN accessory for EW-N / EG-N scales Protects keyboard and enclosure from dust Fits weighing plate 180 × 160 mm Supplied as a pack of 5 Maintain uninterrupted weighing with effective contamination control The protective cover provides straightforward dust protection and splash shielding for precision instruments, reducing the risk of contamination on sensitive control surfaces. Designed as a slim cover for keyboard and housing areas, the guard helps to preserve calibration intervals and decreases the likelihood of cleaning-related downtime. The result is a more consistent workflow and lower operational interruption rates for routine weighing processes. Quick fit and practical spare planning for busy workshops Compatibility with EW-N/EG-N models that use a weighing plate 180 × 160 mm means straightforward integration without adjustments. Supplied as a pack of 5, the set supports planned replacements and on-bench reserves, enabling maintenance teams to swap covers during scheduled servicing. Lightweight construction contributes to easy handling, while the compact format keeps storage requirements minimal and replacement logistics simple. Reliable brand backing and supply continuity from a single partner Manufactured by KERN and available via Metav, the hood benefits from a recognised metrology brand and dependable distribution. Metav’s focus on democratising precision delivers centralised supply and a transparent ordering process from Emmerich, helping to reduce vendor complexity for industry and trade customers. This combination of reputable manufacture and steady sourcing supports responsible procurement and reliable workshop operation. Contact Metav Werkzeuge to discuss suitability for your weighing equipment or to reserve KERN EG-A09S05 protective hoods — reach our team in Emmerich at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for fast, expert advice Technical data Article number: EG-A09S05 Manufacturer: KERN GTIN: 4045761185500 Country of origin: JP Facts Weight: 0.02 kg Weighing plate compatibility: 180 × 160 mm Customs tariff number: 39269097 ECLASS: 24322502 Special features Pack of 5 protective hoods Designed for keyboard and housing protection Compatible with EW-N / EG-N scale models Category: Scales accessories FAQ Is this hood compatible with all KERN precision scales? Compatibility is limited to EW-N and EG-N models that use a weighing plate sized 180 × 160 mm; the KERN EG-A09S05 is designed specifically for those formats How many protective covers are delivered with one SKU? The KERN EG-A09S05 is supplied as a pack of 5, intended to provide immediate spares for routine replacement Can the hood protect the keyboard from spills and dust? Yes — the cover is intended to protect the keyboard and enclosure from dust and light splashes, helping to reduce contamination and cleaning frequency What is the weight of each protective hood? Each hood has a weight of approximately 0.02 kg, making handling and replacement straightforward Who manufactures the hood and where is it produced? The work protection hood is manufactured by KERN and is produced in Japan (JP) KERN — Made in Japan; GTIN: 4045761185500

Take advantage of fast, reliable printing together with plain‑paper archiving and an automatic cutter for streamlined weighing documentation; order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. YKG-01 dot‑matrix printer by KERN — 4.7 lines/s, automatic cutter The YKG-01 is a compact dot‑matrix printer for retail, hospitality and kitchen environments, designed to print weighing results on plain paper for reliable, long‑term archiving. Fast dot‑matrix print at 4.7 lines/s Prints weighing values on plain paper Built‑in automatic paper cutter Interchangeable interface, cable not included Dependable output for retail and catering operations The unit delivers consistent impact printing that is optimised for the frequent, short receipts typical in shops and kitchens. With a rated speed of 4.7 lines/s and a maximum of 42 characters per line, the mechanism ensures legible, evenly spaced output that suits both immediate transaction needs and longer‑term record keeping. Using plain paper instead of thermal rolls reduces running costs and enables simple archival procedures, while the printer’s robust construction resists the knocks and humidity common in catering environments. Simple integration and low‑effort maintenance Engineered for straightforward connection in point‑of‑sale setups, the model provides an interchangeable interface to match existing systems; note that the interface cable is not included. The supplied EU power adapter supports 230 V AC, 50 Hz supplies, and the plug‑in power design keeps replacement simple. Routine consumable changes are fast: the design allows easy paper and ribbon replacement without specialised tools, reducing downtime and keeping staff focused on service rather than maintenance. Archive‑ready receipts and controlled operating range Because the printer produces records on plain paper, documents withstand longer storage and are compatible with conventional filing systems. The integrated automatic paper cutter gives a clean finish to each slip, improving handling and reducing errors when collecting multiple receipts. For reliable use, the device is specified for operation between 5 °C and 35 °C, and its compact footprint suits busy counters and compact kitchen stations, contributing to an orderly, compliant documentation workflow. Contact Metav Werkzeuge for an expert recommendation on integrating the KERN YKG‑01 into the workflow and to arrange supply directly from our Emmerich warehouse – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: YKG SKU: YKG-01 Manufacturer: KERN Origin: JP GTIN: 4045761253056 Facts Dimensions: 160 x 248 x 139 mm Weight: 2.71 kg Print speed: 4.7 lines/s Max characters per line: 42 Power input: 230 V AC, 50 Hz Paper widths: 58, 70, 76 mm Operating temperature: 5 °C–35 °C Special features Printing method: impact (dot‑matrix) Power supply: EURO plug‑in adapter Built‑in automatic paper cutter Interchangeable interface (cable not included) Designed for plain‑paper receipt archiving FAQ How does the YKG‑01 handle receipt archiving? The KERN YKG‑01 prints on plain paper, producing durable receipts suitable for standard filing and longer retention periods. Is an interface cable included with the printer? No, the printer is supplied with an interchangeable interface but the interface cable is not included and must be provided separately. What power supply is required for the unit? The unit uses a 230 V AC, 50 Hz supply and is shipped with a EURO plug‑in adapter. Can the printer be used in a kitchen environment? Yes, the design and impact printing method make it suitable for retail and catering settings; operating conditions should remain within 5 °C–35 °C. What makes this model suitable for point‑of‑sale systems? Its compact size, fast 4.7 lines/s output, automatic paper cutter and interchangeable interface facilitate simple integration into POS workflows. Metav Werkzeuge — Emmerich (warehouse and quality hub); Contact: info@metav-werkzeuge.com; Tel: +49 2822 7131930; WhatsApp: +49 170 2837271

Reliable RS‑232 data transfer and a practical 1.5 m length support seamless connection between weighing instruments and host devices; robust compatibility with balance interfaces reduces integration effort. Order the interface cable directly via Metav Werkzeuge or contact our consultants for application advice. KERN Interface cable 474-926 — RS-232 serial interface, 1.5 m The KERN Interface cable 474-926 is an RS‑232 data cable for connecting scales and balances to computers, printers or data loggers in industrial and laboratory workflows RS-232 serial connection for reliable data transfer Cable length 1.5 m for flexible positioning Designed for scales and balance interfaces Faster, more reliable data transfer for weighing workflows The cable provides a stable RS-232 link that simplifies automated data capture from weighing devices, reducing manual entry and errors. By enabling direct serial communication between instruments and control systems, the cable supports tighter process control and faster reporting. The combination of serial protocol support and a practical cable length means fewer interruptions to production and a more consistent flow of measurement data. Easy integration with existing equipment and systems A standard serial interface removes the need for converters in most installations, making integration into legacy and modern systems straightforward. The 1.5 m lead length allows flexible device placement on benches or in cabinets while maintaining tidy cable runs. Installation requires minimal configuration when the connected balance or scale already supports RS‑232 output, which keeps commissioning time to a minimum and reduces downtime. Industrial suitability and straightforward handling Lightweight at approximately 0.08 kg, the cable is intended for routine workshop and laboratory environments where frequent, dependable connections are required. Manufactured for precision weighing applications, it supports compact setups and mobile test stations alike. The product matches the expectations of professional users who rely on consistent data exchange between measuring instruments and peripheral devices. Clear use cases and practical benefits Ideal for data logging, label printing and PC-based measurement recording, this interface cable is a practical choice where long-term, uninterrupted serial communication is needed. The cable reduces manual transcription, helps maintain traceable measurement records and supports quality workflows in production, testing and goods-in areas. For situations requiring simple, proven connectivity to weighing equipment, this cable delivers a focused solution. Contact Metav Werkzeuge in Emmerich am Rhein for integration guidance on the KERN interface cable 474-926 or to discuss compatible setups; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 474 SKU: 474-926 GTIN: 4045761245181 Manufacturer: KERN Country of origin: CN Eclass: 19050112 HS code: 84239010 Weight: 0.08 kg Core specifications Interface: RS-232 serial Cable length: 1.5 m Segment: Accessories for scales Product group: Cable Features & applications For scales and balances Suitable for data logging and printing interfaces Intended for workshop and laboratory use Manufacturer: KERN FAQ What devices is this cable compatible with? The KERN interface cable 474-926 is compatible with weighing instruments that provide an RS‑232 serial output; compatibility depends on the instrument's serial port and protocol settings. How long is the cable and is that sufficient for bench setups? The cable length is 1.5 m, which is suitable for most bench and cabinet installations while allowing tidy cable routing. Does the cable support direct data logging to a PC? Yes; the RS‑232 connection enables direct transfer of measurement data to PCs, data loggers or label printers that accept serial input. Is the connector type industry standard? The cable provides a standard RS‑232 serial connection; users should verify the required connector and pinout in the instrument manual before installation. Is this cable suitable for regular workshop use? Designed for weighing applications, the cable is lightweight and intended for routine workshop and laboratory environments where reliable serial communication is required. KERN; Metav Werkzeuge, Emmerich am Rhein; info@metav-werkzeuge.com / +49 2822 7131930

Take advantage of precise measurement results through robust vibration damping and a heavy, polished granite surface that stabilises sensitive instruments; compact dimensions and hygienic surfaces support ergonomic use in space-constrained labs. Order the antivibration plate directly via Metav Werkzeuge or contact our consultants for tailored advice and fast dispatch. KERN YPS-05 Antivibration Plate — Polished granite, 565×450×60 mm The KERN YPS-05 is an antivibration plate designed to isolate analytical balances and microscopes from vibrations, providing a stable working surface for high-precision measurements Polished granite on resilient rubber supports Suitable for analytical balances and microscopes Compact footprint 565×450×60 mm Hygiene-friendly, easy-to-clean surfaces Reduce measurement errors with a stable work surface High-precision weighing and optical inspection require a stable base to prevent fluctuating results. The KERN YPS-05 combines mass and material to provide effective vibration damping: the dense polished granite top increases inertia, while the support system attenuates external shocks. This construction reduces measurement scatter and the need for repeat tests, which improves throughput and ensures repeatable results for both routine and traceable analytical tasks. The described behaviour of the platform is particularly relevant when using analytical balances, where even small vibrations can affect the displayed value. Compact footprint that supports ergonomic workflows A small laboratory bench or a crowded workshop does not need to compromise on measurement quality. With overall dimensions of 565×450×60 mm, the plate fits tight workspaces while allowing ergonomic operation either standing or seated. The top surface is finished for cleanliness: hygienic surfaces are easy to wipe down and maintain, supporting contamination control in sensitive environments. The low-profile design enables comfortable access to instruments and ancillary equipment and is tailored to accommodate KERN precision instruments and microscopes with corresponding base sizes. Robust build and ready logistics for uninterrupted operation Durability is central to a long service life and consistent performance. The YPS-05 rests on absorbing rubber elements that decouple the granite slab from bench vibrations and protect the platform from transmitted shocks. This arrangement creates a dependable working surface that preserves instrument calibration and extends operational uptime. For operational planning, the unit is shipping ready in 2 days and delivered palletised, reducing lead times and simplifying installation. The combination of a heavy top and resilient supports yields a stable base that lowers the frequency of adjustments and supports efficient lab routines. For reliable vibration control choose the KERN YPS-05 and contact Metav Werkzeuge in Emmerich for expert advice and prompt palletised dispatch Technical Data Article number: YPS-05 SKU: YPS-05 Manufacturer: KERN GTIN: 4045761253568 Dimensions: 565×450×60 mm Material: Polished granite Origin: DE Commodity code: 84239010 ECLASS: 21170605 Facts Dimensions: 565×450×60 mm Net weight: approx. 42 kg Shipping: ready in 2 days Commodity code: 84239010 ECLASS: 21170605 Special features Material: polished granite Mounted on absorbing rubber elements Hygienic, easy-to-clean surfaces Ergonomic use standing or sitting Suitable for KERN analytical and precision balances and microscopes with corresponding dimensions Shipping: palletised FAQ Is the antivibration plate compatible with analytical balances? The KERN YPS-05 antivibration plate is designed for use with KERN analytical balances and precision scales that fit the platform dimensions; it reduces external vibrations and stabilises weighing results. What are the exact dimensions and weight of the plate? The platform measures 565×450×60 mm and has a net weight of approximately 42 kg, giving sufficient mass for effective vibration isolation. Can the plate be used for microscopes and optical inspection? Yes, the antivibration plate is suitable for microscopes and other optical instruments, providing a vibration-reduced surface for clearer imaging and more consistent observations. How should the polished granite surface be cleaned and maintained? Polished granite on the antivibration plate is easy to maintain; clean with a mild detergent and soft cloth, avoid harsh abrasives, and check the rubber supports periodically for secure seating. Manufacturer: KERN; Dealer: Metav Werkzeuge, Emmerich am Rhein; Email: info@metav-werkzeuge.com; Phone: +49 2822 7131930; WhatsApp: +49 170 2837271

Internal rechargeable operation combined with a 32 h runtime and a 12 h recharge cycle ensures extended, reliable weighing performance; the compact 0.03 kg form factor keeps installation and handling straightforward. Benefit from continuous operation and easy replacement to maintain production flow. Order the EG-A06 directly via Metav Werkzeuge or consult our specialists for application advice. EG-A06 Internal rechargeable battery for EW and EG scales — 32 h runtime, KERN An internal rechargeable battery, EG-A06, designed to supply power to KERN EW and EG weighing instruments where mains power is unavailable or intermittent. Internal rechargeable battery for EW/EG scales Up to 32 h runtime without backlight 12 h standard charging time Lightweight: 0.03 kg for easy handling Ensures long, uninterrupted weighing cycles The rechargeable power module provides a 32 hours operating window when the display backlight is not in use, which translates into fewer interruptions for measurement tasks and longer periods between charges. This extended runtime reduces process downtime and supports continuous shifts in workshops and production lines. The result is greater operational efficiency and predictable scheduling for measuring tasks. Short recharge time minimises downtime A full recharge requires approximately 12 hours, allowing overnight replenishment and ready availability for the next working day. The battery's rechargeable design reduces the need for frequent replacements and lowers ongoing consumable costs. Its compact mass of 0.03 kg makes handling during installation or replacement simple, so maintenance routines remain quick and uncomplicated. Straightforward compatibility for inward installation Built for internal operation with EW and EG scales, the module is suited to models featuring a weighing pan size of 180 x 160 mm, enabling direct integration into compatible instruments. Installation is designed to be practical for workshop technicians and service staff, supporting a rapid return to service. The unit’s specification aligns with the requirements of standard industrial weighing equipment, ensuring predictable performance in routine metrology tasks. Designed for reliable precision environments Manufactured by KERN, the power unit complements systems where measurement accuracy and continuity are priorities. By delivering stable power over extended periods, the module supports consistent measurement conditions and helps prevent data gaps or interrupted processes. For workshops and small production facilities seeking dependable measuring setups, this solution contributes to predictable workflows and reduced operational anxiety. For uninterrupted weighing with the KERN EG-A06 internal rechargeable battery, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply to your workshop. Technical data Article number: EG-A06 SKU: EG-A06 GTIN: 4045761028302 Manufacturer: KERN Country of origin: JP Tariff code: 85073020 ECLASS: 21059207 Core figures Weight: 0.03 kg Battery runtime: 32 h (without backlight) Charging time: 12 h Storytrigger / Category: Waagen, Zubehör Compatibility & features Internal battery operation Designed for EW and EG scales Suitable for models with weighing pan size 180 x 160 mm Intended for continuous workshop use FAQ How long does the battery operate between charges? The KERN EG-A06 delivers up to 32 hours of operation without the display backlight; actual runtime depends on display settings and usage patterns. How long does a full recharge take? A complete recharge takes approximately 12 hours under standard charging conditions. Which instruments are compatible with this battery module? Compatibility covers KERN EW and EG scale models designed for internal power modules, especially those with a weighing pan size of 180 x 160 mm. Is the battery module easy to install and replace? Yes; the unit is lightweight (0.03 kg) and engineered for straightforward installation into compatible KERN weighing instruments, reducing service time. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271

Reliable 9 V / 300 mA output combined with a 100–240 V universal input and interchangeable international plug adapters supports uninterrupted use across workshops and while travelling; the compact, lightweight design keeps bench space clear and simplifies storage. Order the KERN YKA-03N directly via Metav Werkzeuge or ask our consultants for tailored advice. KERN YKA-03N — Universal external power adapter with 9 V / 300 mA output and multi‑plug set The KERN YKA-03N is a compact universal external power adapter designed for scales and precision instruments, providing a steady 9 V / 300 mA supply and interchangeable plugs for EU, UK, US and CH mains sockets. Universal input 100–240 V, 50/60 Hz Stable 9 V DC output at 300 mA Interchangeable EU/UK/US/CH plug adapters Compact and lightweight, approx. 0.08 kg Reliable compatibility for mixed‑fleet workshops The adapter offers true international compatibility, accepting 100–240 V at 50/60 Hz, which eliminates the need for separate supplies when using instruments across different regions. This wide input range reduces logistic complexity for service technicians and procurement teams, ensuring the same power solution can be used for a variety of precision devices. The result is fewer inventory items and a more consistent power profile for bench‑level equipment. Practical plug set and travel convenience Delivered with interchangeable EU/UK/US/CH plug adapters, the unit supports rapid redeployment in different markets without additional accessories. The compact casing and lightweight construction (approx. 0.08 kg) make it suited to mobile test benches and field service kits. For applications that require frequent relocation of instruments, the adapter provides a tidy, portable option that minimises downtime and transport costs. Stable supply for sensitive measuring devices Designed as an external power source for scales and similar measuring equipment, the adapter supplies 9 V at 300 mA, matching common input requirements for precision instruments. The consistent voltage and current specification helps to maintain measurement stability and reduces the risk of fluctuations that can affect calibration results. This makes the unit appropriate for laboratory benches, inspection rooms and industrial scales where repeatable readings are essential. Clear integration into workshop supply chains As a universal external adapter, the device integrates easily with existing instrument fleets and cabling standards. The compact footprint frees up bench space, while the included plug set avoids compatibility delays when deploying equipment to different countries. For purchasing departments, the standardised specification simplifies procurement and stock management, supporting smoother operations and fewer interruptions. Choose the KERN YKA-03N for dependable international compatibility and contact Metav Werkzeuge in Emmerich for personalised advice and fast dispatch—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: YKA-03N Manufacturer: KERN GTIN: 4045761210431 Country of origin: CN Commodity code: 85044090 Core technical data Input voltage: 100–240 V, 50 / 60 Hz Output: 9 V DC, 300 mA Weight: approx. 0.08 kg Special features External universal power adapter for scales and precision instruments Interchangeable plug adapters included: CH, EURO, UK, US Compact form factor for bench and mobile use FAQ Is this adapter suitable for KERN scales and other precision instruments? The KERN YKA-03N is intended as an external power supply for KERN scales and comparable precision instruments that require a 9 V / 300 mA input. Which plug types are included with the adapter? The delivery scope for the adapter includes interchangeable plug adapters for EU, UK, US and CH mains sockets to support international use. Can the adapter be used worldwide without a separate voltage converter? Yes. The universal input of 100–240 V, 50/60 Hz enables operation across standard mains voltages without an additional converter. How portable is the unit for field service work? With a compact design and a weight of approximately 0.08 kg, the adapter is well suited to mobile toolkits and service engineers who require a lightweight power option. What is the exact model designation to order or reference? Refer to the SKU YKA-03N and manufacturer KERN when ordering or checking compatibility. KERN — Origin: China; SKU: YKA-03N; GTIN: 4045761210431