Planfräser für schnelle, plane Flächenbearbeitung
Planfräser sind speziell entwickelte Trägerwerkzeuge zum großflächigen Abtrag und exakten Planfräsen von Werkstücken und verbessern die Oberflächenqualität sowie die Prozessstabilität bei der Bearbeitung von Stahl, Guss und NE-Metallen; sie kommen sowohl in offener Ausführung ohne Innenkühlung als auch als innengekühlte Varianten zum Einsatz, wobei die innengekühlte Version durch gezielte Kühlmittelzufuhr thermische Überlastung verhindert und die Standzeit erhöht. Die Werkzeuge dienen dazu, große Schnittbreiten effizient zu bearbeiten und durch optimale Spanabfuhr eine gleichmäßige Oberfläche zu erzeugen, wobei die offene Ausführung einfache Fräsaufgaben mit externer Kühlung abdeckt. Planfräser bieten besonders bei schwer zerspanbaren, wärmeempfindlichen oder klebenden Werkstoffen Vorteile, weil die innengekühlte Bauform die Bildung von Aufbauschneiden reduziert und die Oberflächengüte verbessert.
40mm Face Milling Head for BLMP 0904 Indexable Inserts With Internal Coolant, 100° Cutting Angle - Teknik Makina
Take advantage of a compact, precision-focused solution that combines a 40 mm diameter, internal coolant and compatibility with BLMP 0904 indexable inserts to maintain stable face-milling cycles and consistent surface quality. Order directly via Metav Werkzeuge or request tailored advice from our consultants for optimal integration into production. Planmesserkopf – face milling head with 40 mm diameter and internal coolant by Teknik Makina A Planmesserkopf engineered for efficient face milling with BLMP 0904 indexable inserts, designed to deliver compact, repeatable surfacing performance in small to medium workshop setups. 40 mm diameter for compact face milling Internal coolant supply for improved chip evacuation Compatible with BLMP 0904 indexable inserts Five cutting edges for efficient material removal Torx T10 mounting for secure insert retention Compact diameter for stable, predictable machining results A reduced tool diameter contributes to lower overhang and improved rigidity, which directly benefits cycle stability and dimensional consistency. The 40 mm cutter body is advantageous where space is limited or where minimised tool projection is required; by limiting deflection, the design enables more accurate planar cuts and reduced rework. The head’s configuration with five cutting edges balances material removal rate and surface quality, making it suitable for finishing and light roughing tasks. Integrated coolant for longer tool life and better finishes The built-in internal coolant channel delivers cutting fluid directly to the cutting zone, which helps to evacuate chips, reduce cutting temperatures and prevent built-up edge. In practice, this results in extended tool life and a more consistent surface finish across production runs. For workshops transitioning from external coolant setups, the internal supply reduces reliance on external nozzles and simplifies machine setup while improving cooling efficiency at the insert cutting edge. Robust mounting and simple service for productive workshops A secure fastening system based on T10 Torx engagement and M3.5×8.5 screws ensures reliable insert retention during heavier cuts and frequent index changes. The compact 40 mm overall length and light mass contribute to fast index and tool changes, shortening setup times on multi-shift floors. Compatibility with BLMP 0904 indexable inserts and proven fit with Taegutec-specified inserts supports standardisation of spare parts across fleets and simplifies inventory management. For a production-ready face milling solution from Teknik Makina, contact Metav Werkzeuge for specification support and ordering assistance—email info@metav-werkzeuge.com or call +49 2822 7131930 to match the cutter head precisely to the application. Technical data Article number: T485-1TM Label: 40mm Planmesserkopf BLMP 0904 L40mm mit Innenkühlung Manufacturer: Teknik Makina Facts Diameter: 40 mm Overall length: 40 mm Shank/holder diameter: 16 mm Weight: 0.176 kg Cutting edges: 5 Cutting angle: 100° Special features Internal coolant Compatible with BLMP 0904 indexable inserts Compatible with Taegutec inserts Torx T10 key Torx screw M3.5×8.5 FAQ Which indexable inserts fit this cutter head? The cutter head accepts BLMP 0904 indexable inserts and is compatible with inserts specified by Taegutec for the same seat geometry. Does the milling head provide internal coolant? Yes, the Planmesserkopf includes internal coolant, supplying fluid directly to the cutting zone for improved chip evacuation and tool life. What are the key dimensions to consider for machine setup? The head has a 40 mm diameter, 40 mm overall length and a 16 mm shank/holder diameter, which helps to assess rigidity and clearance for the intended machine. How are inserts secured in the head? Inserts are fastened using a T10 Torx interface and M3.5×8.5 screws, ensuring stable retention during machining and straightforward servicing. Is this cutter suitable for compact or confined setups? Yes, the compact design and reduced overhang of the 40 mm head make it well suited to confined setups where rigidity and minimal projection are critical. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Face Milling Head for LNMU 0303 Indexable Inserts Internal Coolant, 55° Cutting Angle - Teknik Makina
Take advantage of the combination of compact 40 mm diameter design, integrated internal coolant and compatibility with LNMU 0303 indexable inserts to maintain consistent surface quality and higher throughput. Order the tooling directly via Metav Werkzeuge or consult our specialists for application matching. Face mill head for LNMU 0303 indexable inserts — 40 mm diameter with internal coolant by Teknik Makina The face mill head is designed for compact, high-efficiency facing operations using LNMU 0303 indexable inserts in general machining and production environments. 40 mm diameter for compact milling Internal coolant for longer tool life 6 cutting edges for efficient stock removal Compatible with LNMU 0303 indexable inserts High-efficiency facing with compact dimensions The compact 40 mm diameter milling head delivers stable cutting for tight setups while enabling a respectable material removal rate when space is limited. The combination of a 55° cutting angle and 6 cutting edges reduces vibration and distributes cutting forces, which helps to maintain cycle times and tool-change intervals. This configuration supports predictable process behaviour in series production and small-batch workshops, translating blade geometry into measurable throughput gains. Integrated coolant channel for consistent surface quality An internal coolant channel provides directed cooling and chip control at the cutting zone, which reduces thermal load and improves surface finish and repeatability. By promoting efficient chip evacuation and cooling the cutting edge, the system extends tool life and reduces rework. For applications where consistency across multiple faces is essential, the coolant feed is a decisive factor in reducing micro-welds and edge build-up during prolonged cuts. Straightforward integration and proven compatibility Designed specifically for LNMU 0303 indexable inserts, the tool accepts inserts from Tungaloy and OKE, enabling flexible supply options and easy re-tooling in mixed-vendor environments. The head mounts on a 16 mm connection and is secured with Torx T8 fasteners using M2.5x7 screws, supporting quick replacement and reliable clamping. With a compact total length and a lightweight build, the milling head is suitable for retrofitting into existing tool setups without major adaptation, simplifying spare-part logistics. For precise facing jobs where coolant supply and insert compatibility matter, choose the Teknik Makina face mill head and contact Metav Werkzeuge for application advice and procurement: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: T728-1TM Manufacturer: Teknik Cutting Tools Product type: Face mill head Facts Diameter: 40 mm Overall length: 40 mm Shank / mount diameter: 16 mm Weight: 0.275 kg Cutting edges: 6 Cutting angle: 55° Special features Internal coolant Designed for LNMU 0303 indexable inserts Compatible with Tungaloy and OKE inserts Torx key: T8 Torx screw: M2.5x7 ECLASS: 21181015 FAQ What insert type fits this milling head? The milling head accepts LNMU 0303 indexable inserts, utilising the standard seat and clamping geometry for this insert family. Is the cutter suitable for use with Tungaloy inserts? Yes, the tool is compatible with inserts from Tungaloy as well as OKE, enabling flexible sourcing. Does the head provide internal coolant? Yes, the head features internal coolant to aid chip evacuation and tool life under continuous operation. What are the mounting and fastening details? Mounting is via a 16 mm connection and the cutter is secured using Torx T8 fasteners with M2.5x7 screws; spare fixings match these specifications. Which SKU should be ordered for this item? Order the item under SKU T728-1TM for the 40 mm face mill head compatible with LNMU 0303 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Face Milling Head for LNMX 1004 Indexable Inserts with Internal Coolant, 90° - Teknik Makina
Benefit from the compact 40 mm diameter, integrated internal coolant and five cutting edges for efficient, repeatable face milling; order the T505TM directly via Metav Werkzeuge or contact our consultants for specification support. Face‑milling head T505TM — 40 mm with internal coolant (Teknik Makina) A face‑milling head designed for LNMX 1004 indexable inserts, delivering compact face cutting with built‑in coolant for stable machining. 40 mm diameter for compact face milling Internal coolant for improved chip evacuation Accepts LNMX 1004 indexable inserts (Korloy) 90° cutting angle with five cutting edges Consistent machining and higher throughput The compact 40 mm cutter body concentrates cutting forces for steady performance on short overhangs. Fitted with five cutting edges and a 90° cutting angle, this head promotes uniform material removal and predictable surface finish — a real advantage where cycle time and repeatability matter. The construction minimises vibration in constrained set‑ups, translating tool geometry into demonstrable production gains for batch and single‑piece work alike. Controlled cooling for longer insert life Integrated internal coolant supplies lubrication and cooling directly to the cutting zone, which reduces thermal load and helps prevent built‑up edge on the inserts. Used with LNMX 1004 indexable inserts (compatible with Korloy grades), the coolant path supports consistent chip evacuation and prolongs insert life, lowering tooling costs and decreasing unscheduled stoppages. For users unfamiliar with internal coolant, this means fewer thermal distortions and steadier cutting performance over extended runs. Quick servicing and secure clamping Maintenance is straightforward thanks to the standardised fastenings: T15 Torx engagement for insert retention and M4x10 screws for secure fixing. The head’s low mass (0.19 kg) and accessible screw interfaces allow rapid index changes and minimal downtime, which suits production environments where tool change frequency impacts throughput. The clear, common fastening format reduces the need for special tools and supports a predictable maintenance routine. Compact compatibility for versatile workshops Model T505TM from Teknik Makina suits compact machining stations and toolrooms that require small, dependable face‑milling solutions. Its form factor and insert compatibility simplify stockholding, as the head uses the widely available LNMX 1004 inserts. The combination of reduced inventory complexity and a proven head design supports smoother workflow integration in both the workshop and production line. For tailored advice on integrating the T505TM into existing setups or to secure stock from our Emmerich distribution, contact Metav Werkzeuge for reliable supply and consultation. Technical data Article number: T505TM Product type: Face‑milling head Brand: Teknik Makina Label: 40mm Planmesserkopf LNMX 1004 L40mm mit Innenkühlung Key data Diameter: 40 mm Overall length: 40 mm Weight: 0.19 kg Cutting edges: 5 Cutting angle: 90° Screw: M4x10 Torx key: T15 Features Internal coolant Fits LNMX 1004 indexable inserts Compatible with Korloy inserts Compact design for short overhangs FAQ Which indexable inserts fit this head? The T505TM accepts LNMX 1004 indexable inserts and is compatible with Korloy grades suitable for that insert designation. Does the head provide coolant supply? Yes, the head has internal coolant, delivering fluid directly to the cutting zone to assist chip evacuation and reduce insert wear. What are the key dimensions of the cutter? The cutter has a 40 mm diameter and an overall length of 40 mm, designed for compact face‑milling operations. How many cutting edges does it offer and what is the angle? The tool is built with five cutting edges and a 90° cutting angle, promoting consistent face finishes and effective material removal. Which fastening and screw types are required for insert changes? Insert retention uses a T15 Torx interface with M4x10 screws for secure and rapid replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Face Milling Head for LOGU 0303 Indexable Inserts with Internal Coolant, 6 Inserts, 16mm Shank - Teknik Makina
Take advantage of the small footprint and internal coolant to maintain steady chip evacuation while the six cutting edges ensure efficient material removal; order directly via Metav Werkzeuge or consult our specialists for integration advice. Planmesserkopf – Face milling head, 40 mm diameter, internal coolant (Teknik Makina) Planmesserkopf for precise face milling with LOGU 0303 indexable inserts, designed for compact toolholders and high repeatability in production environments 40 mm diameter for compact milling heads Internal coolant for effective chip control Compatible with LOGU 0303 Kyocera inserts Compact design that keeps cycle times low The compact 40 mm diameter face milling head combines a small envelope with a robust cutting concept to reduce setup constraints on smaller machines. With six cutting edges, load is distributed evenly across inserts, which improves surface finish and allows higher material removal per pass. The reduced overhang and the 16 mm mounting diameter contribute to better rigidity and less vibration, resulting in more consistent results on aluminium, steel and general workshop materials. This configuration supports efficient machining while keeping spindle loads predictable. Secure clamping and directed coolant for consistent tool life Built for reliable clamping and simple servicing, the tool uses M3x7 Torx screws tightened with a T8 key for straightforward insert changes and repeatable seating. The integrated internal coolant directs cutting fluid to the cutting zone, improving cooling and chip evacuation which extends insert life and reduces rework. Compatibility with LOGU 0303 indexable inserts from Kyocera ensures a wide choice of geometries for finishing or roughing. The combination of secure fastening and internal coolant helps maintain dimensional stability during longer cycles. Practical workshop benefits and straightforward maintenance Weighing just 0.283 kg and finished for balanced rotation, the head keeps spindle stress low and minimises setup time when replacing or indexing inserts. The compact overall length of 40 mm supports tight toolpacks and simple collision planning. Supplied as a ready-to-fit milling head (SKU T731-1TM) from Teknik Makina, it suits job shops and production lines that prioritise uptime and predictable performance. The design reduces maintenance intervals and simplifies stocking: one head plus a set of LOGU 0303 inserts covers many common face-milling tasks. For application advice or technical confirmation for the Teknik Cutting Tools face milling head T731-1TM, contact Metav Werkzeuge — our specialists in Emmerich will advise on integration, suitable inserts and machining parameters. Technical data SKU: T731-1TM Manufacturer: Teknik Makina Product: Face milling head for LOGU 0303 indexable inserts Facts Diameter: 40 mm Overall length: 40 mm Mounting / bore diameter: 16 mm Number of cutting edges: 6 Weight: 0.283 kg Torx screw: M3x7 Torx key: T8 Special features Internal coolant Compatible with LOGU 0303 indexable inserts Suitable for Kyocera insert range Compact design for improved rigidity Balanced for reduced vibration FAQ What insert type does this face milling head use? The face milling head accepts LOGU 0303 indexable inserts; the unit is configured for Kyocera-compatible geometries to cover finishing and roughing tasks. Is there internal coolant supply on the tool? Yes, the Planmesserkopf features internal coolant, which delivers lubricant directly to the cutting edge to improve tool life and chip evacuation. Which fastening hardware is required for insert changes? Insert retention is via M3x7 Torx screws tightened with a T8 key; this ensures repeatable clamping and quick service on the workshop floor. What are the mounting dimensions and balance considerations? The head has a 16 mm mounting diameter and a compact 40 mm overall length; its low mass (0.283 kg) helps maintain spindle balance and reduce vibration. Can the T731-1TM be used on small milling machines? Yes, the compact envelope and secure clamping make the T731-1TM suitable for smaller CNC mills and job-shop machinery where space and rigidity are considerations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Face Milling Head for LOGU 0303 Indexable Inserts, 6 Cuts, T15/M3x7 - Teknik Makina
Take advantage of a compact, robust face milling solution that pairs compatibility with LOGU 0303 indexable inserts and a 40 mm diameter for stable, space-saving setups; the 16 mm shank and six cutting positions deliver long tool life and predictable uptime — order the face milling head directly via Metav Werkzeuge or ask our consultants if needed. Face milling head for LOGU 0303 indexable inserts — 40 mm diameter · 6 cutting edges · Teknik Makina A face milling head engineered for LOGU 0303 indexable inserts, designed for reliable face milling applications where compact dimensions and repeatable performance matter Face milling head for LOGU 0303 inserts 40 mm diameter for compact setups Six cutting positions for extended life 16 mm shank with T15 Torx fixing Stable compatibility that reduces setup uncertainty Built around the LOGU 0303 insert system, this milling solution accepts Kyocera-style indexable inserts and converts their proven cutting geometry into dependable face-milling performance. The head’s design accommodates the standard insert seating and clamping forces, which means less trial-and-error during tool setup and more predictable component tolerances. By choosing a head that matches the insert family, the machining process benefits from consistent chip control and a familiar regrind or replacement workflow, so production planners gain measurable process stability. Longer productive periods through indexed cutting positions The head features six cutting positions, allowing operators to rotate to a fresh edge rather than replace the entire insert immediately, extending service intervals and lowering tooling cost per component. Fast, secure retention is achieved with an M3x7 screw tightened with a T15 Torx key, simplifying maintenance routines and reducing changeover time. This configuration supports efficient workshop practices: when a cutting edge is worn, the insert is indexed quickly and the tool returns to cut within seconds, which helps to keep cycle times stable and reduces unscheduled downtime. Compact dimensions for rigid, space-efficient machining With a 40 mm diameter and an overall height of 40 mm combined with a 16 mm shank, the head is deliberately compact to suit small to medium milling spindles and tight fixtures. The reduced overhang improves rigidity and vibration resistance, contributing to better surface finish and extended insert life compared with larger, more cantilevered arrangements. The compact format also makes the head a practical choice for workshops looking to standardise tooling across multiple machines without sacrificing accessibility or repeatability. For technical advice or to secure fast supply of the Teknik Makina face milling head compatible with LOGU 0303 indexable inserts, contact Metav Werkzeuge in Emmerich by e-mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: T731TM Manufacturer: Teknik Makina Compatible system: LOGU 0303 / Kyocera indexable inserts Torx key: T15 Fixing screw: M3x7 Facts Diameter: 40 mm Overall height: 40 mm Shank diameter: 16 mm Cutting edges: 6 Special features Face milling application Compact design for small spindles Secure Torx clamping system Suitable for indexed insert rotation FAQ What inserts does this head accept? The face milling head accepts LOGU 0303 indexable inserts, matching Kyocera-style insert geometry for reliable seating and chip control. How is an insert secured in the head? Inserts are fixed with an M3x7 screw tightened using a T15 Torx key; the design permits quick indexing and secure clamping. Which machines suit this face milling head? Compact to medium milling spindles with a 16 mm tool holder or collet are appropriate, where the 40 mm diameter supports rigid, space-efficient setups. How many usable edges are available before replacement? The head accommodates inserts with six cutting positions, enabling multiple edge indexes to extend effective tool life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Face Milling Head for SDMT 09T3 Indexable Inserts With Internal Coolant, 4-Edge, T15 Screwdriver - Teknik Makina
Take advantage of a compact, performance-oriented design with internal coolant and a 40 mm diameter to improve machining consistency and reduce thermal load. Order the cutter directly via Metav Werkzeuge or consult the Metav team for application support. Face milling head T362-1TM — 40 mm diameter with internal coolant for SDMT 09T3 indexable inserts (Teknik Makina) A robust face milling head engineered for precise face milling operations with SDMT 09T3 indexable inserts, offering a compact 40 mm design and integrated coolant feed for improved insert life. 40 mm diameter for compact setups Internal coolant for improved tool life Four cutting edges for efficient material removal High material-removal efficiency in a compact package The compact 40 mm design delivers concentrated cutting performance where space is limited without compromising stability. With four cutting edges, the tool enables balanced load distribution across inserts, which reduces vibration and supports consistent surface finish. The relatively low mass of 0.215 kg contributes to a fast-reacting tool system, helping to maintain spindle performance during light-to-medium face milling tasks. This combination of geometry and mass translates into improved machining throughput and predictable process behaviour in production environments. Integrated cooling and secure fixing for longer service life Built-in internal coolant directs cutting fluid close to the cutting zone, lowering temperatures at the edge and promoting chip evacuation. The result is reduced thermal wear on the insert seat and extended interval between changes. Inserts are secured with M3.5x8.5 Torx screws, tightened using a T15 key, ensuring a repeatable and secure clamping interface. Clear specification of fastening hardware simplifies maintenance planning and reduces downtime for insert changes, supporting uninterrupted workflows on the shop floor. Simple compatibility and easy workshop integration Designed to accept SDMT 09T3 indexable inserts and optimised for inserts from ZCC, the head integrates with common insert inventories to reduce tooling complexity. The overall length of 40 mm facilitates use in compact toolholders while preserving accessibility for maintenance. The head is manufactured by Teknik Makina and configured for straightforward replacement of cutting edges, which helps maintain operational readiness and aligns with centralised procurement strategies for cutting tools. Contact Metav Werkzeuge for tailored advice on deploying the Teknik Makina T362-1TM face milling head with internal coolant and for reliable supply from Emmerich. Technical data SKU: T362-1TM Product type: Face milling head Label: 40 mm face milling head SDMT 09T3 L40mm with internal coolant Manufacturer: Teknik Makina Core specifications Diameter: 40 mm Overall length: 40 mm Weight: 0.215 kg Cutting edges: 4 Internal coolant: yes Torx screw: M3,5x8,5 Torx key: T15 Compatibility & features For indexable inserts: SDMT 09T3 Suitable insert supplier: ZCC Product family: Face milling components FAQ What inserts fit this milling head? The T362-1TM accepts SDMT 09T3 indexable inserts; the head is specified for compatibility with inserts from ZCC. Is the head supplied with mounting screws? Mounting uses M3.5x8.5 Torx screws (Torx T15); check the delivery contents with the order to confirm included fasteners. Does the tool support coolant-through operation? Yes, the cutter head features internal coolant to deliver fluid close to the cutting edge for improved thermal control. What are the physical dimensions to consider for toolholder selection? Key dimensions are 40 mm diameter and 40 mm overall length; use these values when selecting a compatible holder. Who manufactures the product and who supplies it in Europe? The head is manufactured by Teknik Makina and supplied in Europe via Metav Werkzeuge for dependable logistics and quality filtering. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Face Milling Head for SNKX 1206 Indexable Inserts 45° Cutting Angle, M4x12.5 Torx T15 - Teknik Makina
Take advantage of a compact, reliable cutter head that combines precise geometry, broad insert compatibility and fast serviceability for steady production. With a 45° cutting angle and a 16 mm shank it delivers controlled material removal and straightforward integration into existing toolholders — order the component via Metav Werkzeuge or consult our technical team for tailored advice. Face milling head T319TM – compact cutter for SNKX 1206 indexable inserts (Teknik Makina) Face milling head T319TM is a compact cutter designed for SNKX 1206 indexable inserts, providing a 45° cutting angle for efficient face milling in confined setups For SNKX 1206 indexable inserts 45° cutting angle, three cutting edges 16 mm shank, Ø cutting up to 53 mm Torx fixing M4x12.5 with T15 key Faster, more consistent face milling with proven geometry The head is engineered to increase throughput while maintaining surface quality. The 45° cutting angle reduces axial load and encourages favourable chip evacuation, which supports higher feed rates without compromising finish. Combined with the three cutting edges and max cutting diameter 53 mm, the design balances material removal rate and tool life, offering a measurable improvement in cycle stability for repetitive face‑milling operations. Simplified stocking and flexible carbide choices Compatibility with the SNKX 1206 insert format reduces inventory complexity and supports rapid replacement. The cutter accepts inserts from common carbide suppliers such as Böhlerit, Korloy, Palbit, which allows selection of grades tailored to alloy and finish requirements. This standardisation helps procurement and workshop managers streamline tool rotation and reduces downtime caused by waiting for specialised inserts. Quick, repeatable mounting that reduces downtime Mounting is straightforward and engineered for repeatability: the head fits a 16 mm shank and secures inserts with a M4x12.5 Torx screw operated by a T15 key. The Torx fixation gives consistent clamp torque and makes insert changes fast and reliable. At approximately 0.417 kg and with a total length of 45 mm the assembly is compact, which helps to limit overhang and vibration on smaller milling centres, supporting stable cutting conditions. Built for workshop reliability and straightforward integration Manufactured by Teknik Makina, the cutter head combines robust construction with a compact footprint to suit both small production runs and series manufacture. The standardised interface and familiar insert format make retrofit into existing tool systems straightforward, reducing setup time. For customers in Europe, Metav Werkzeuge provides a quality‑screened supply chain from its Emmerich base, ensuring dependable availability and consistent parts handling. Discuss integration of the Teknik Makina face milling head T319TM with Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com for specific application guidance and supply options Technical data Article number: T319TM Manufacturer: Teknik Makina Description: for SNKX 1206 Indexable Inserts Facts Shank diameter: 16 mm Max cutting diameter: 53 mm Body diameter: 40 mm Total length: 45 mm Weight: 0.417 kg Cutting angle: 45° Number of cutting edges: 3 Special features Compatible inserts: SNKX 1206 Compatible manufacturers: Böhlerit, Korloy, Palbit Torx screw: M4x12.5 Torx key: T15 Brand: Teknik Makina FAQ Which insert type fits this cutter head? The T319TM face milling head accepts SNKX 1206 indexable inserts and is designed around that standard format. What is the maximum cutting diameter achievable? Maximum cutting diameter is 53 mm, which defines the practical face‑milling width for this head. How are inserts secured in the head? Inserts are fixed with an M4x12.5 Torx screw; a T15 key provides consistent clamping torque for secure assembly. What shank or holder size is required? The head uses a 16 mm shank interface, suitable for holders and adaptors that accept that diameter. Which materials and applications suit this cutter head? The cutter head is intended for face milling and finishing applications where SNKX 1206 inserts are appropriate; choice of carbide grade (from suppliers such as Böhlerit, Korloy, Palbit) determines suitability across steels and general workshop materials. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Face Turning Head for LNMU 0303 Indexable Inserts, 6 Cutting Edges, 16mm Shank - Teknik Makina
Take advantage of a compact, high‑performance face milling solution: a robust Ø40 mm head with six cutting edges and a 16 mm shank that boosts material removal while keeping tool changes quick. Order directly via Metav Werkzeuge or consult our specialists for application matching. Face milling head for LNMU 0303 indexable inserts – compact Ø40 mm, 6 edges by Teknik Makina A face milling head engineered for precise, high‑efficiency face milling with LNMU 0303 indexable inserts in compact toolholders and demanding workshop environments Compact face milling head Ø40 mm Six cutting edges for high removal rates 16 mm shank for secure toolholder fit Compatible with TNGLY‑OKE LNMU 0303 inserts Faster stock removal with minimal downtime The compact Ø40 mm cutting head delivers high metal removal in confined setups by distributing cutting forces across six cutting edges, so each insert carries a reduced load. Because the head accepts LNMU 0303 indexable inserts, the cutting tips are replaceable, avoiding full‑tool changes and significantly reducing machine downtime. For production planners this means predictable cycle times and fewer interruptions during multi‑part batches. Secure mounting and straightforward maintenance for reliable production A 16 mm shank ensures a tight fit into standard toolholders, improving run‑out stability and surface finish. Fixing is by M2.5×7 Torx screws accessed with a T8 Torx key, enabling quick insert swaps and controlled torque application. The design reduces the risk of incorrect clamping and supports repeatable set‑ups, which is especially beneficial for workshops aiming for consistent component tolerances and lower rework rates. Proven compatibility and application flexibility Designed specifically for LNMU 0303 style inserts and compatible with TNGLY‑OKE grades, the head suits a range of finishing and semi‑roughing tasks across ferrous and non‑ferrous materials (application to specific alloys depends on the chosen insert grade). The combination of a compact diameter, multiple cutting edges and standardised fixing means the tooling is flexible enough for tight‑access operations while maintaining efficient chip evacuation and cutting stability. For supply, technical matching or to discuss suitable insert grades for specific materials, contact Metav Werkzeuge to benefit from fast delivery and experienced application advice. Technical data SKU: T728TM Manufacturer: Teknik Makina ECLASS: 21180902 Core dimensions Diameter: 40 mm Overall height: 40 mm Shank diameter (D): 16 mm Cutting edges: 6 Designs / special features For LNMU 0303 indexable inserts Compatible inserts manufacturer TNGLY‑OKE Torx key size T8 Torx screw M2.5×7 Suitable for demanding machining, long tool life FAQ What insert type does this head accept? The face milling head accepts LNMU 0303 indexable inserts and is verified for use with TNGLY‑OKE inserts to ensure correct fit and performance (SKU T728TM, Teknik Makina). Can the head be used in compact toolholders? Yes, the 16 mm shank is intended for compact toolholders and provides secure mounting for stable machining with the face milling head (Teknik Makina, T728TM). How are inserts attached and replaced? Inserts are secured with M2.5×7 Torx screws and serviced using a T8 Torx key, allowing rapid replacement of worn cutting tips on the LNMU 0303 system (face milling head by Teknik Makina). Is this head suitable for heavy roughing? The head is designed for efficient face milling and semi‑roughing when paired with the appropriate LNMU 0303 insert grade; selection of the correct insert material and geometry determines suitability for heavy roughing. Manufacturer/Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Facing Cutter Head for WNMX 09T3 Indexable Inserts, 4 Cutting Edges, M3x7 Torx Screw - Teknik Makina
Take advantage of a purpose-built face milling solution that combines precise insert compatibility with straightforward maintenance: the compact design supports efficient face milling using WNMX 09T3 indexable inserts and secures reliably via Torx fastening for reduced downtime. Order directly via Metav Werkzeuge or consult our technical team for application advice. T669TM face milling head – 40 mm diameter, for WNMX 09T3 inserts (Teknik Makina) A T669TM face milling head engineered for efficient face milling with WNMX 09T3 indexable inserts, suitable for light to medium-duty surfacing and finishing operations on production machines Compatibility with Korloy WNMX 09T3 inserts 40 mm diameter for broad face coverage Four cutting edges for stable material removal 16 mm shank for secure clamping Reliable insert compatibility for repeatable set-up The compact face milling head is matched to the widely used WNMX 09T3 indexable insert, ensuring fast, repeatable set-up across machines that accept a 16 mm tool bore. Built for straightforward insert changes, the head secures inserts with Torx M3x7 screws tightened with a T8 key, reducing changeover time and helping to maintain consistent tool geometry. Compatibility with Korloy inserts provides access to established cutting grades and geometries without bespoke tooling, which streamlines procurement and keeps spares simple. Consistent machining performance and low downtime Engineered with four cutting edges, the cutter head distributes cutting forces to reduce vibration and promote even wear, supporting steady surface finish quality during face milling passes. The geometry and mass balance of the head contribute to smoother spindle loads; at approximately 0.213 kg, the component is light enough to avoid unnecessary added inertia while still robust enough for routine production use. Fast, repeatable insert changes via the Torx fastening system minimise machine downtime and support higher productivity in batch and series manufacture. Practical design that supports production reliability With a 40 mm diameter and a total length of 40 mm, the head provides good face coverage while maintaining accessibility in compact set-ups. The 16 mm clamping diameter secures the head in standard toolholders for rigid positioning and repeatable concentricity. Supplied by Teknik Makina and distributed through Metav Werkzeuge, the component is intended as a straightforward replacement or upgrade for existing systems where WNMX 09T3 inserts are already in use, helping workshops and production lines to maintain continuity with proven insert solutions. Choose the Teknik Cutting Tools T669TM for dependable face milling with WNMX 09T3 inserts and contact Metav Werkzeuge for tailored advice and prompt supply from Emmerich – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: T669TM Product: Face milling head (Planmesserkopf) Compatible inserts: WNMX 09T3 (Korloy) Manufacturer: Teknik Makina Core data Diameter: 40 mm Overall length: 40 mm Shank / bore diameter: 16 mm Cutting edges: 4 Weight: 0.213 kg Features and compatibility Torx screw: M3x7 Torx key: T8 Suitable for Korloy WNMX 09T3 indexable inserts Intended for face milling operations FAQ Which inserts fit this milling head? The T669TM face milling head accepts WNMX 09T3 indexable inserts; Korloy inserts in that format are directly compatible. What shank diameter is required for mounting? The head requires a 16 mm shank/clamping diameter for secure mounting in the toolholder. How many cutting edges does the cutter head provide? This milling head is equipped to use inserts that provide four cutting edges, enabling balanced material removal. Which fastening tools are needed for insert changes? Insert retention uses Torx M3x7 screws; a T8 key is required for tightening and loosening. Is the T669TM suitable for production environments? Yes, the T669TM face milling head is designed for reliable, repeatable set-up and quick insert changes, making it suitable for production use where WNMX 09T3 inserts are employed. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Indexable Corner Cutter 90° for ANHX 1206 Indexable Inserts, 4 Cutting Edges, 16mm Shank - Teknik Makina
Benefit from the 90° geometry, secure Torx fastening and direct compatibility with ANHX 1206 indexable inserts for consistent right‑angle milling and low setup times; order the component directly via Metav Werkzeuge or consult the technical team for fitment advice. 90° Corner Milling Head for ANHX 1206 Indexable Inserts (Teknik Makina) — 16 mm shank, Torx M3.5×8.5 fastening The 90° Corner Milling Head for ANHX 1206 Indexable Inserts is a compact insert holder engineered for precise shoulder and face milling in CNC machining environments. 90° cutting angle for square operations Compatible with ANHX 1206 indexable inserts 16 mm shank for secure mounting Torx M3.5×8.5 fastening with T15 key Consistent right‑angle machining for repeatable production quality The 90° design delivers a reliable right‑angle approach that simplifies setup and reduces the need for additional fixture adjustments. With ANHX 1206 compatibility and a geometry optimised for square‑shoulder work, the head maintains a predictable tool path and repeatability across batches. This translates into fewer part reworks and a steadier process capability in series production. The provision of four cutting edges supports uninterrupted operation until the next indexed change, contributing to higher machine utilisation and lower per‑part manufacturing cost. Robust fastening and dimensions that cut changeover time A secure clamping concept is essential for stable cutting forces; the holder uses a Torx M3.5×8.5 screw tightened with a T15 key, ensuring consistent seat pressure and repeatable insert positioning. The 16 mm shank provides a compact but rigid connection to the toolholder system, while the 40 mm head diameter and 40 mm overall length balance accessibility in tight assemblies with the stiffness required for heavier cuts. At 0.248 kg, the head is light enough to limit spindle imbalance yet substantial enough to give a solid cutting feel. These dimensions reduce vibration and provide stable cutting conditions that improve surface finish and tool life. Suited to compact CNC setups and industrial workflows Designed for workshops and production lines that prioritise space and efficiency, the corner milling head integrates seamlessly into standard toolholding arrays and is a practical choice where square‑shoulder milling and face operations are frequent. Compatibility with Palbit‑type inserts (ANHX 1206) allows sourcing of proven grades for a variety of materials, enabling optimisation for aluminium, steel or cast components depending on the chosen insert grade. The compact design supports rapid index changes and straightforward inventory management, helping maintenance teams to keep cycles short and throughput high. Contact Metav Werkzeuge for compatibility checks and procurement of the Teknik Makina 90° corner milling head — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice and fast delivery from Emmerich Technical Data Article number: T641TM Manufacturer: Teknik Makina Product: 90° corner milling head for ANHX 1206 indexable inserts Facts Shank diameter: 16 mm Head diameter: 40 mm Overall length: 40 mm Weight: 0.248 kg Cutting angle: 90° Number of cutting edges: 4 Special features Compatible inserts: ANHX 1206 Compatible insert manufacturer: Palbit Fastening screw: Torx M3.5×8.5 Torx key size: T15 FAQ What inserts fit this milling head? The head is designed for ANHX 1206 indexable inserts; compatible grades from Palbit are commonly used for versatile performance. Is the shank suitable for standard toolholders? The 16 mm shank diameter matches common compact toolholder systems and offers a rigid connection for reliable machining. How is the insert secured? Inserts are fixed with a Torx screw (M3.5×8.5) tightened with a T15 key, providing repeatable clamping and precise seating. Can the head be used for both shoulder and face milling? Yes; the 90° geometry and balanced dimensions make it suitable for square‑shoulder operations and face milling tasks in series production. What is the SKU for ordering and reference? Reference T641TM when enquiring about the Teknik Makina 90° corner milling head for ANHX 1206 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Indexable Corner Cutter for 90° APMT 0602-0903 Indexable Inserts, T6 Torx Screw M2x4.2 - Teknik Makina
Take advantage of a robust 90° solution with precise compatibility for APMT 0602 indexable inserts and a compact 16 mm shank that reduces vibration and set-up time — order directly via Metav Werkzeuge or consult our specialists for integration support. Corner turning head — 90° indexable turning head with APMT 0602 compatibility (Teknik Makina) The corner turning head is designed for precise external corner turning and face finishing in CNC turning applications using APMT 0602 indexable inserts 90° geometry for precise corner turning Compatible with APMT 0602 indexable inserts 16 mm shank diameter for stable clamping Torx T6 mounting with M2x4.2 screw Accurate 90° geometry for consistent corner finishing The 90° tool geometry delivers a repeatable cutting angle that simplifies set-up and reduces secondary finishing. With a focus on process stability, the head’s 90° orientation is matched to standard APMT 0602 inserts so that edge engagement is predictable and surface integrity is preserved. This orientation shortens cycle times by enabling straightforward toolpaths for corner relief and profiling, providing a measurable gain in throughput for batch and single-piece production. Secure fastening and fast insert changes to keep cycles moving A Torx T6 retention and an M2x4.2 screw provide reliable clamping for the indexable insert, enabling quick changeovers without compromising rigidity. The compact 16 mm shank ensures a tight fit in standard toolholders, reducing micro-movement under cutting loads. Reduced downtime for insert replacement and secure mounting translate directly into higher machine utilisation and lower process variation in serial production. Stiff, compact construction for improved surface quality With a 40 mm diameter and a 40 mm overall height, the head balances stiffness with compactness to fit tight tool arrangements while resisting deflection. The robust form factor supports consistent chip formation and tool life extension when used with quality carbide inserts from compatible manufacturers such as Korloy. This mechanical stability helps to maintain surface finish requirements and reduces the frequency of rework in high-precision turning tasks. Built for compatibility across workshop workflows The head accepts APMT 0602 indexable inserts and integrates into existing turning tool systems with minimal modification. Its design supports quick retrofitting into established processes, making it suitable for job shops and production lines that demand predictable results from modular tooling solutions. The combination of standardised insert geometry and a reliable clamping concept assists process engineers in achieving consistent part accuracy across runs. For a reliable 90° turning solution from Teknik Cutting Tools, contact Metav Werkzeuge for tailored advice and assured supply from Emmerich: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: T596TM Brand: Teknik Makina Product type: 90° corner turning head for APMT 0602 indexable inserts Core technical data Diameter: 40 mm Overall height: 40 mm Shank diameter (take-up): 16 mm Number of cutting edges: 10 Compatibility: APMT 0602 inserts Special features Compatible insert manufacturer: Korloy Mounting screw: M2x4.2 Torx key size: T6 Indexable insert type: APMT 0602 Angle: 90° FAQ What insert type does this head accept? The corner turning head accepts APMT 0602 indexable inserts, fitted and secured using the specified Torx T6 screw arrangement. Is the shank suitable for standard toolholders? The head features a 16 mm shank diameter designed for stable clamping in compatible toolholder systems. Which insert manufacturers are compatible? Compatibility is specified for Korloy APMT 0602 inserts; the head is designed around that insert geometry for optimal fit. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Indexable Corner Cutting Head 90° For ADMT 1204 Indexable Inserts, M3x7 Torx Screw - Teknik Makina
Take advantage of a compact, 90° corner turning head that is built for reliable right‑angle operations with ADMT 1204 indexable inserts, combining secure clamping and simple integration to keep machining cycles efficient — order directly via Metav Werkzeuge or consult our specialists for application advice. Corner Turning Head 90° T214TM — for ADMT 1204 indexable inserts, 16 mm shank (Teknik Makina) The Corner Turning Head T214TM is a 90° turning tool head designed for precision right‑angle turning on lathes and CNC machines, intended for use with ADMT 1204 indexable inserts. 90° cutting geometry for right‑angle turning Compatible with ADMT 1204 indexable inserts 16 mm shank for secure mounting Torx M3x7 clamping screw, T8 key required Consistent right‑angle performance for turning operations The 90° geometry delivers a dependable cutting orientation that simplifies fixture planning and reduces set‑up complexity. Fitted for ADMT 1204 indexable inserts, the tool head provides a stable engagement point that helps reduce chatter and improves surface finish on shoulder and face machining. The compact geometry supports predictable tool behaviour, which contributes to shorter cycle times and higher process reliability for repetitive production runs. Simple mounting and secure clamping for fast changeovers Designed with a 16 mm shank and a modest overall length of 45 mm, this tool head slots into conventional toolposts and turret stations without the need for special adapters. The clamping is achieved with a Torx M3x7 screw (Torx key T8), enabling quick, repeatable insert fixation and easing maintenance routines. At 0.28 kg, the head is light enough to limit inertia but robust enough to withstand normal turning forces, supporting stable cutting and minimal tool deflection. Workshop efficiency through compatibility and durability Compatibility with Walter ADMT 1204 inserts ensures wide availability of insert grades and geometries, allowing shops to match insert specification to material and operation. The compact diameter (40 mm) and the nominal cutting angle make this head suitable for confined setups where a right‑angle approach is required. Built for regular production use, the head supports efficient insert indexing and predictable tool life, contributing to overall cost efficiency and reduced downtime in busy turning environments. Contact Metav Werkzeuge for tailored advice on integrating the T214TM corner turning head into existing tool systems and to request detailed technical data from our Emmerich team. Technical Data SKU: T214TM Manufacturer: Teknik Makina Article name: Corner turning head T214TM For indexable inserts: ADMT 1204 Compatible insert brand: Walter Cutting angle: 90° Dimensions & weight Diameter: 40 mm Overall length: 45 mm Shank diameter: 16 mm Weight: 0.28 kg Fixing & compatibility Torx screw: M3x7 Torx key size: T8 ECLASS: 21181015 Number of cutting edges (insert format): 4 FAQ What inserts fit this turning head? The corner turning head is designed for ADMT 1204 indexable inserts and is compatible with the ADMT format offered by Walter. Which shank size is required for mounting? A 16 mm shank seat is specified for the T214TM; the compact shank supports secure mounting in standard toolposts. What torque or key is used to clamp the insert? Clamping is performed with a Torx M3x7 screw; a T8 Torx key is required for tightening. Is the head suitable for right‑angle shoulder and facing operations? Yes — the 90° geometry of the head ensures consistent right‑angle engagement for shoulder turning and facing tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Indexable Face Mill for RPMT 10T3 Inserts With Internal Coolant - Teknik Makina
Benefit from the combination of a compact 40 mm diameter, internal coolant and compatibility with RPMT 10T3 indexable inserts for efficient and reliable milling; order the cutter directly via Metav Werkzeuge or ask our consultants if needed. Round indexable cutter T706-1TM — 40 mm diameter with internal coolant (Teknik Makina) Round indexable cutter T706-1TM for high-efficiency face milling with RPMT 10T3 indexable inserts and integral coolant supply. Compact 40 mm diameter for tight setups Internal coolant for improved tool life Compatible with RPMT 10T3 indexable inserts Five cutting positions for continuous operation Compact design that boosts throughput The 40 mm cutter diameter and compact overall length make this tool ideal for confined setups where space and access are restricted. As a round indexable cutter, it houses five indexable inserts, allowing for continued operation with minimal interruption when a single insert is changed. The design reduces set-up time and supports steady material removal rates, which contributes to predictable cycle times and consistent throughput on the shopfloor. Coolant-through feature for controlled temperatures The integrated internal coolant channel delivers coolant directly to the cutting zone, reducing temperatures at the insert edge and improving chip evacuation. This targeted lubrication helps to preserve insert geometry and extends service intervals, resulting in fewer unplanned stops. For operations where thermal stability affects surface finish and dimensional accuracy, the coolant-through design provides a measurable performance advantage over external-only cooling. System compatibility and quick insert changes Made for RPMT 10T3 indexable inserts and compatible with Korloy-made inserts, the cutter simplifies tooling logistics by using a widely available insert type. The tool’s five cutting positions provide balanced cutting forces and a stable cutting run, while indexable inserts enable fast replacement without complex regrinding. Lightweight at 0.24 kg, the milling head is easy to handle during tool changes and tool magazine loading, reducing ergonomic strain and saving valuable time in production routines. Proven partner quality and supply reliability Produced by Teknik Makina, this round indexable cutter combines practical construction with industry-standard insert compatibility, making it suitable for diverse milling tasks. Supplied via Metav Werkzeuge, customers benefit from a dependable European supply channel and expert advice from a precision partner that supports workshops with a broad product range and a promise of consistent quality and transparent order handling. Contact Metav Werkzeuge for application guidance and fast supply of the Teknik Makina T706-1TM; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: T706-1TM eClass: 21180902 Label: 40mm Rundplattenfräser RPMT 10T3 L40mm mit Innenkühlung Manufacturer: Teknik Makina Core data Diameter: 40 mm Overall length: 40 mm Cutting edges: 5 Weight: 0.24 kg Special features Internal coolant For RPMT 10T3 indexable inserts Compatible with Korloy inserts Product type: Round indexable cutter FAQ What insert type does this cutter accept? The cutter accepts RPMT 10T3 indexable inserts; it is compatible with Korloy-manufactured RPMT 10T3 inserts for straightforward sourcing and replacement. How does the internal coolant improve performance? The internal coolant delivers coolant directly to the cutting zone, lowering cutting temperatures and improving chip control, which helps to extend insert life and maintain surface quality. How many cutting positions are available on the tool? The milling head provides five cutting positions, enabling continued machining with rapid insert indexing and reduced downtime for maintenance. Is the tool suitable for tight or confined machining setups? With a compact 40 mm diameter and a short overall length, the cutter is designed for operations where space is limited and where a compact tool reduces interference and setup complexity. Who supplies the T706-1TM and where can application advice be obtained? The T706-1TM is supplied by Teknik Makina and distributed via Metav Werkzeuge; application guidance and order support are available from Metav Werkzeuge’s consultants. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Indexable Round Cutter for RDMT 1204 Inserts 4‑Edge, 16mm Shank - Teknik Makina
Take advantage of the compact 40 mm diameter and compatibility with RDMT 1204 indexable inserts for efficient small-diameter face milling; secure clamping with M3.5x8.5 Torx screws keeps changeovers fast and reliable. Order the 40 mm round insert milling head directly via Metav Werkzeuge or ask our consultants if needed. Round Insert Milling Head for RDMT 1204 – 40 mm, L40 The Round Insert Milling Head is a compact face milling solution designed for high-productivity machining with RDMT 1204 indexable inserts in constrained tool setups. Ø 40 mm cutting diameter Compatible with RDMT 1204 indexable inserts Four cutting edges for steady material removal Compact 40 mm overall length Increased throughput with a small footprint A small-diameter cutter that delivers measurable productivity gains: the combination of a 40 mm cutting diameter and 4 cutting edges allows stable chip formation and repeatable surface quality in short overhangs. The tool accepts RDMT 1204 indexable inserts, which are designed for fast, repeatable seating and consistent cutting geometry. For shops migrating from solid-tool strategies, this approach reduces inventory cost by using replaceable inserts, while maintaining the machining characteristics expected from a dedicated face milling head. The compact form factor also reduces tool vibration and contributes to longer insert life. Fast maintenance and secure assembly to cut downtime Maintenance is simplified by the use of standard Torx hardware and readily available screws: the head is secured with M3.5x8.5 screws accessed using a Torx T15 key, enabling quick insert replacement and secure clamping during operation. This reliable fastening system lowers the risk of assembly errors and minimises unplanned stops on the shop floor. The head’s modest mass and balanced design support predictable tool behaviour, helping to keep cycle times consistent across repeated production runs. Designed for tight setups and versatile workshop use With an overall length of 40 mm and a mounting bore of 16 mm, the cutter suits applications where restricted tool overhang and clearance are critical. The compact dimensions make it appropriate for face milling, light profiling and interrupted cuts where a short projection improves stability. The head integrates easily into existing toolholder systems used for face milling heads and is especially useful for job shops and production environments seeking a compact, indexable solution that fits into established workflows. For tailored application advice and reliable supply of Teknik Makina’s 40 mm round insert milling head, contact Metav Werkzeuge for expert guidance and prompt dispatch from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: T139TM Label: 40mm Rundplattenfräser RDMT 1204 L40mm Product type: Round insert milling cutter Manufacturer: Teknik Makina ECLASS: 21180902 Facts Diameter: 40 mm Overall length: 40 mm Mounting bore: 16 mm Cutting edges: 4 Weight: 0.236 kg Torx key: T15 Screw: M3.5x8.5 Special features For RDMT 1204 indexable inserts Category: Face milling head (Planmesserkopf) Compact design for reduced overhang Secure Torx clamping system FAQ What inserts are compatible with this milling head? The milling head accepts RDMT 1204 indexable inserts; these inserts provide repeatable seating and are suited to the cutter’s geometry for stable chip control. How is the cutter fixed and serviced? Screws with the specification M3.5x8.5 are used and require a Torx T15 key for assembly and insert changes, allowing quick and secure maintenance. Which applications suit this 40 mm head best? The tool is tailored to compact face milling tasks, short overhang operations and situations where a small-diameter cutter improves stability and surface finish. Is the head suitable for interrupted cuts? Yes, the combination of 4 cutting edges and secure clamping makes the head capable of handling light interrupted cuts while maintaining insert life. What toolholders are compatible with the mounting bore? The head’s 16 mm mounting bore is compatible with standard holders designed for small-diameter face milling heads and short-projection set-ups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Indexable Round Cutter For RHKW 1204 Indexable Inserts, 4 Teeth, 16mm Shank - Teknik Makina
Take advantage of the secure Torx mounting, compact 40 mm cutting diameter and four cutting edges for consistent finishing in small-batch and serial milling operations; order via Metav Werkzeuge or consult our technical advisors for compatibility details. Round Insert Face Mill (Rundplattenfräser) T612TM — 40 mm, for RHKW 1204 Indexable Inserts (Teknik Makina) The Round Insert Face Mill is a compact milling cutter engineered for finishing and light material removal using RHKW 1204 indexable inserts, suitable for machine shops and production cells. 40 mm cutting diameter Four cutting edges for smooth material removal 16 mm shank for rigid clamping Compatible with Ingersoll RHKW 1204 inserts Reliable cutting performance for predictable cycle times The design delivers consistent chip control and repeatable geometry thanks to the cutter's balanced tool body and four cutting edges. A 40 mm cutting diameter combined with precise insert seating reduces vibration and supports stable finish quality on common steels and cast components. Where process reliability is paramount, the combination of a compact cutter and multiple cutting edges enables shorter cycle times with less rework, improving throughput in frequent short-run turning-to-milling operations. Fast, secure mounting and simple maintenance The head is fixed with a M4x10 Torx screw and a clamp screw M3.5, requiring only a T15 Torx key for insert changes and routine maintenance. This clamping concept shortens tool-change intervals and lowers downtime on the shop floor. The 16 mm shank provides a secure interface in standard toolholders, promoting stiffness during light-face milling. Clear mechanical connections also simplify inspection and reduce the risk of improper seating that can affect surface finish. Flexible integration into standard tool inventories Engineered for the RHKW 1204 indexable inserts and compatible with Ingersoll insert geometries, the cutter integrates easily into existing toolsets. The compact overall length of 40 mm makes it especially suitable where clearance is limited or where multiple tools must be arranged close together on the turret or milling spindle. Its balanced specification supports both finishing passes and modest material removal, giving production planners a compact option for mixed production demands. Confidence through established supply and support Supplied under Teknik Makina specifications and stocked for rapid dispatch, the tool benefits from reliable sourcing and clear technical data for procurement and quality checks. Documentation and spare-part references are available to support inventory management and process audits. For workplaces prioritising traceability, the SKU T612TM provides an unambiguous identifier for ordering and record-keeping. For assured compatibility with RHKW 1204 indexable inserts and to arrange procurement through Metav Werkzeuge, please contact Metav Werkzeuge GmbH at +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: T612TM Manufacturer: Teknik Makina Product: Round insert face mill (Rundplattenfräser) Facts Diameter: 40 mm Cutting edges: 4 Overall length: 40 mm Shank diameter: 16 mm Weight: 0.246 kg Torx screw: M4x10 Clamp screw: M3.5 Torx key: T15 Special features For RHKW 1204 indexable inserts Compatible with Ingersoll inserts Compact overall length for limited clearance applications Secure Torx fastening system FAQ What inserts does this cutter accept? The cutter is designed for RHKW 1204 indexable inserts and has been specified for compatibility with inserts from Ingersoll. Which toolholders suit the shank size? A 16 mm shank requires toolholders sized for a 16 mm shank; the tool's compact geometry simplifies integration into standard milling setups. How many cutting edges are available before indexing? The tool body accommodates inserts that provide four cutting edges, enabling multiple indexings before replacement. What is the article number for ordering and documentation? Order and reference with the SKU T612TM, which is used for stock management and procurement records. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Indexable Turning Head 90° For ADMT 1606 Indexable Inserts M4x10 Torx T15 - Teknik Makina
Take advantage of a compact, precisely engineered 90° turning solution with a 16 mm shank and secure Torx clamping for consistent, repeatable results; ideal where rigid mounting and compatibility with ADMT 1606 indexable inserts are required. Order the angle turning head directly via Metav Werkzeuge or ask our consultants if needed. Angle turning head T351TM — 90° toolholder for ADMT 1606 indexable inserts (Teknik Makina) Angle turning head T351TM for external turning applications, designed to accept ADMT 1606 indexable inserts and to provide a rigid 16 mm mounting for stable machining at a 90° cutting geometry. 90° cutting geometry for precise turning Compatible with ADMT 1606 inserts 16 mm shank for rigid mounting Torx M4x10 clamping with T15 key Consistent 90° geometry for predictable machining results The 90° cutting angle is integrated to deliver a repeatable cutting direction, which reduces setup variation and simplifies programme planning for batch production. Built for short overhangs, the compact head and its 16 mm shank increase stiffness at the cutting point, lowering vibration and improving surface finish. With a focus on process reliability, the design supports stable chip formation when paired with the correct ADMT 1606 grades, so cycle times and rework are reduced without sacrificing component accuracy. Secure clamping and compatible interface for quick changeovers Clamping is effected via a Torx M4x10 screw, driven with a T15 key, which ensures consistent torque and straightforward insert replacement. The head accepts ADMT 1606 indexable inserts and is declared compatible with Walter inserts, enabling flexible tooling choices across common insert ranges. The secure fastening method minimises micro-movement at the insert seat, supporting repeatability and extending tool life through uniform load distribution. Compact dimensions that support workshop efficiency With a diameter of 40 mm, an overall length of 45 mm and a mass of 0.258 kg, the unit is compact enough to be installed in tighter turret pockets while still offering sufficient mass for damping. The small footprint helps reduce tool overhang and allows closer tool-to-tool spacing in multi-station setups, which can shorten cycle times and improve throughput. The straightforward mechanical interface and common insert format make integration into existing CNC turning cells efficient and predictable. For procurement or technical advice on the Teknik Makina angle turning head T351TM, contact Metav Werkzeuge to discuss compatibility, delivery and ordering options — Metav's specialists will assist with selection and logistics. Technical data Article number: T351TM Manufacturer: Teknik Makina Facts Diameter: 40 mm Overall length: 45 mm Shank / mounting diameter: 16 mm Weight: 0.258 kg Cutting angle: 90° Compatible insert type: ADMT 1606 Number of cutting edges: 4 Special features Torx screw: M4x10 Torx key size: T15 Compatible with Walter inserts Compact design for reduced overhang FAQ Which insert type fits this toolholder? The angle turning head accepts ADMT 1606 indexable inserts; Teknik Makina's T351TM is made to work with that insert form and is compatible with Walter-manufactured ADMT 1606 grades. Is the head suitable for external turning on small diameters? Yes — the 90° geometry and compact form factor of the T351TM are intended for external turning operations where short overhang and high rigidity are required. What is the shank diameter and how does it affect mounting? The toolhead uses a 16 mm shank, providing a rigid connection to the turret or holder and improving stability compared with smaller-diameter tooling. How are inserts secured to the head? Inserts are clamped with a Torx M4x10 screw tightened using a T15 key, ensuring consistent torque and secure seating for reliable repeatability. What are the key dimensions and weight for setup planning? Key measures are a 40 mm diameter, 45 mm overall length and a weight of 0.258 kg, useful for assessing clearance and balance in multi-tool setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Indexable Turning Tool Head for 90° WNGX 0403 / WNGX 0806, T8 Torx Screw M2.5x5.5 - Teknik Makina
Take advantage of precise 90° geometry and robust mounting to improve turning stability and repeatability; combined compatibility with Korloy WNGX 0806 inserts and straightforward Torx fastening ensures fast tool changes and reliable production. Order this turning head directly via Metav Werkzeuge or contact the consultants for tailored advice. 90° turning head T692TM — for WNGX 0806 indexable inserts (Teknik Makina) The 90° turning head T692TM is a compact toolholder engineered for stable, repeatable turning with Korloy WNGX 0806 indexable inserts in shop and industrial lathe applications. 90° cutting geometry for square turning 16 mm shank for stable mounting Compatible with Korloy WNGX 0806 inserts Requires T8 Torx key and M2.5x5.5 screw Predictable cutting performance through controlled geometry The 90° cutting geometry gives a defined cutting direction and steady tool engagement, which reduces chatter and improves surface finish stability. Designed for operations where consistent radial contact is essential, the turning head converts insert geometry into repeatable results. With a focus on throughput, the configuration supports steady material removal and reliable part tolerances, allowing process planners to predict cycle times more accurately. Fast, secure set-up that keeps machines running Installation and changeover are straightforward thanks to the 16 mm shank and accessible clamping features. The turning head accepts Korloy WNGX 0806 inserts and is fastened using the T8 Torx key with an M2.5x5.5 screw, enabling secure clamping and quick replacement of cutting edges. This straightforward interface reduces downtime during insert changes and makes the component suitable for both single‑operator shops and automated tool magazines. Compact dimensions with industrial robustness With a Ø40 mm diameter and overall height 40 mm, the holder fits tight tool stations while providing the rigidity expected in production environments. The design accommodates six cutting edges where applicable, offering balanced support for the insert and helping to distribute cutting forces evenly. Easy access to the fixing screw and clear mechanical seating mean routine maintenance is fast, supporting predictable tool life without the need for specialised service. Practical benefits for workshop efficiency and supply reliability The head is intended for routine turning tasks where compatibility and quick serviceability matter most. Supplied as a concise, well‑specified component, it helps reduce inventory complexity by matching common Korloy insert types. Combined with Metav’s European logistics and expert advice, the component becomes part of a dependable workflow: swift delivery from Emmerich, product advice, and a broad range of complementary tooling to streamline procurement and machine uptime. For dependable 90° turning solutions from Teknik Makina, contact Metav Werkzeuge for expert guidance and order support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T692TM Manufacturer: Teknik Makina ECLASS: 21180902 Suitable for inserts manufacturer: Korloy Facts Shank diameter: 16 mm Diameter: 40 mm Overall height: 40 mm Cutting angle: 90° Number of cutting edges: 6 Special features Compatible with Korloy WNGX 0806 indexable inserts Fastening: M2.5x5.5 screw Torque tool: T8 Torx key SKU: T692TM FAQ What inserts fit this turning head? The turning head is compatible with Korloy WNGX 0806 indexable inserts; confirm insert size before ordering. Which tool is required to change the insert? Insert fastening uses an M2.5x5.5 screw that is driven with a T8 Torx key for secure clamping. What are the key mounting dimensions? Key dimensions include a 16 mm shank, Ø40 mm diameter and an overall height of 40 mm, suitable for compact tool stations. Can this head be used for heavy roughing cuts? The 90° geometry and robust shank provide stability for many turning tasks; match insert grade and machining parameters to the application. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Planer Cutter Head 100° For BLMP 0904 Indexable Inserts, 5 Cuts, M3.5x8.5 Torx - Teknik Makina
Take advantage of a compact, precision‑focused milling solution that combines a 100° cutting angle, a 40 mm diameter and a secure 16 mm shank for stable set‑ups; the result is efficient face‑milling with minimal tool change time. Order via Metav Werkzeuge for reliable supply from Emmerich or request consultation if technical matching is required. Planing cutter head for BLMP 0904 indexable inserts — 100° cutting angle, 40 mm diameter (Teknik Makina) The planing cutter head is a compact face‑milling head designed for BLMP 0904 indexable inserts and engineered for precise steel machining in workshop and production environments 100° cutting angle for fine finishing 40 mm diameter for compact setups 16 mm shank for secure mounting Compatible with BLMP 0904 inserts (Taegutec) Proven cutting geometry for consistent surface quality The head’s 100° cutting angle and its arrangement of five cutting edges deliver a balanced material engagement that reduces vibration and produces a consistent finish on machined faces. The geometry is optimised for finishing passes and light to medium material removal, so cycle times can be shortened without compromising surface integrity. For users seeking measurable efficiency gains, this results in fewer re‑works and a steadier production flow when machining steels. Secure mounting and quick insert change to reduce downtime With a 16 mm shank and a compact 40 mm diameter, the tool head fits tight toolholders while keeping the centre of gravity close to the spindle, improving rigidity during face‑milling. Insert clamping is secured by a Torx screw M3.5x8.5 operated with a T10 key, enabling straightforward, repeatable insert replacement. The use of standard BLMP 0904 indexable inserts (Taegutec) simplifies stock management and ensures rapid return to cut after a tool change, supporting uninterrupted production. Built for workshop robustness and predictable handling Constructed for demanding steel applications, the component’s modest mass (approx. 0.176 kg) and compact overall length of 40 mm make it easy to handle and fit into crowded fixturing without compromising stability. The combination of compact design and durable construction provides a practical balance between handling convenience and machining performance, which is particularly valuable for small‑batch production and mixed‑operation job shops where tool flexibility and reliable repeatability matter. Contact Metav Werkzeuge for tailored advice and assured availability from Emmerich — quote SKU T485TM for prompt assistance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T485TM Manufacturer: Teknik Makina Product: Planing cutter head for BLMP 0904 indexable inserts Facts Diameter: 40 mm Overall length: 40 mm Shank diameter: 16 mm Cutting angle: 100° Cutting edges: 5 Weight: 0.176 kg Torx screw: M3.5x8.5 Torx key size: T10 Special features Compatible with BLMP 0904 indexable inserts Suitable for Taegutec inserts Designed for face‑milling applications Robust construction for steel machining FAQ Which indexable inserts fit this tool head? The planing cutter head accepts BLMP 0904 indexable inserts; compatibility with Taegutec inserts is specified for the Teknik Makina face‑milling head (SKU T485TM). What is the required shank and tightening method? The head uses a 16 mm shank and is secured with a Torx screw M3.5x8.5, tightened/loosened using a T10 Torx key for repeatable clamping. How many cutting edges does the tool provide and what finish can be expected? The tool incorporates five cutting edges and a 100° cutting angle, delivering a stable engagement for fine finishing on machined faces. Is this head suitable for steel machining? Yes; the Teknik Makina planing cutter head is designed for robust steel machining, offering the geometry and construction needed for routine face‑milling tasks. How are inserts replaced on the face‑milling head? Replace inserts by loosening the Torx screw (M3.5x8.5) with a T10 key, remove the used BLMP 0904 insert and fit the new insert; ensure seating and secure clamping before resuming machining operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Planing Cutter Head 100° For BLMP 0603 Indexable Inserts, 6 Cutting Edges, 45mm Overall Length, M3x6.5 Torx Screw - Teknik Makina
Take advantage of the 100° cutting geometry, proven compatibility with BLMP 0603 indexable inserts and a compact 16 mm shank to increase face-milling throughput while reducing set-up time; order directly via Metav Werkzeuge or consult our specialists for application advice and integration support. Planmesserkopf — Face milling head, 100° cutting angle, for BLMP 0603 (Teknik Makina) The Planmesserkopf is a compact face milling head designed for use with BLMP 0603 indexable inserts, offering controlled chip formation and consistent surface quality across a range of facing and finishing tasks 100° cutting geometry for stable cuts Compatible with BLMP 0603 indexable inserts Compact 16 mm shank for versatile mounting Secure Torx clamping with M3x6.5 screw Stable, efficient facing with optimised geometry The 100° cutting geometry delivers reduced vibration and predictable chip flow, which directly improves surface finish and cycle-to-cycle repeatability. By pairing the head with BLMP 0603 inserts, the cutter benefits from small, indexable cutting edges that spread wear and extend tool life. For production environments that value uptime, this translates into fewer stoppages for regrinding and a lower cost per component through consistent material removal rates and predictable tool-change intervals. The result is measurable productivity gain without complex process changes. Fast, accurate mounting and reliable clamping A precise 16 mm shank and compact overall length minimise overhang and contribute to rigidity in the spindle, supporting higher feed rates and better dimensional control. The tool is delivered with a M3x6.5 Torx screw and requires a T8 key for insert clamping, enabling quick insert replacement and secure seating. The combination of a small form factor and robust fastening reduces set-up time and minimises human error during tool changes, which is particularly valuable in mixed-batch and job-shop workflows where changeovers must be efficient and repeatable. Compact design engineered for workshop durability With a nominal 40 mm diameter, 6 cutting edges and a lightweight construction of approximately 0.262 kg, the head offers a balance between strength and manoeuvrability. The compact mass lowers spindle load while maintaining cutting stability, making the component suitable for both high-speed finishing and conventional facing operations. Manufactured with attention to metalworking tolerances, the cutter head resists deformation and keeps insert seats intact over many tool cycles, supporting long-term reliability and predictable maintenance intervals. Clear application focus for improved throughput Designed for indexable inserts and compatible with Taegutec blades, the head is ideal for facing, light roughing and finishing on castings, steel and general workshop materials where small insert sizes are preferred. The small insert format reduces per-insert cost while allowing multiple indexes per blade, enabling a favourable balance between initial tooling investment and ongoing operating cost. When integrated into a production cell, the head’s features contribute to shorter machining cycles and a streamlined tooling inventory. For procurement, technical matching or rapid delivery advice on Teknik Makina’s face milling head (SKU T480TM), contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored selection and reliable supply from stock. Technical data SKU: T480TM Manufacturer: Teknik Makina ECLASS: 21180902 Facts Diameter: 40 mm Shank (arbor) diameter: 16 mm Weight: 0.262 kg Total length: 45 mm Cutting angle: 100° Cutting edges: 6 Torx screw: M3x6.5 Torx key: T8 Special features for BLMP 0603 Indexable Inserts Compatible with Taegutec inserts Compact face milling head design Suitable for facing and finishing operations FAQ What insert type does this milling head use? The milling head is configured for BLMP 0603 indexable inserts; Teknik Makina’s Planmesserkopf is optimised for the small-format BLMP 0603 geometry. Is the head compatible with Taegutec inserts? Yes, the component is specified as compatible with Taegutec inserts and seats BLMP 0603 blades correctly for secure clamping and repeatable performance. What are the mounting dimensions for spindle selection? The head has a 16 mm shank diameter and a total length of 45 mm, which supports compact mounting and low overhang in many milling spindles. How many cutting edges are available per head? The design provides 6 cutting edges, enabling multiple indexes and a favourable balance between cutting area and insert replacement frequency. Which applications benefit most from this head? The head is best for facing, light roughing and finishing where BLMP 0603 inserts offer efficient chip control and low per-insert cost; it suits both CNC and manual milling environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Precision 90° Corner Turning Head for LNMT 0804 Indexable Inserts, M2.5x7 Screw - Teknik Makina
Take advantage of a compact, precision-engineered solution that combines durable performance and fast insert changes; the design balances rigidity with easy handling and is ideal for demanding turning operations. Order directly via Metav Werkzeuge or request tailored advice from our consultants for application-specific recommendations. Angle tool head T222TM — 90° indexable insert tool holder for LNMT 0804 inserts The Angle tool head T222TM is designed for 90° turning operations using LNMT 0804 indexable inserts and is optimised for robust workshop and production use. 90° cutting geometry for square shoulders Compatible with LNMT 0804 inserts from ISCAR 16 mm shank diameter for compact setups Quick securement via M2.5x7 Torx screw Consistent 90° geometry for reliable shoulder turning The 90° cutting geometry ensures repeatable, right-angled faces while reducing setup adjustments, making it particularly suited to operations that demand tight tolerances. The holder’s design accepts LNMT 0804 indexable inserts, which enable quick insert change and consistent chip control. With a 16 mm shank and a compact Ø40 mm head, the unit delivers a rigid connection to the toolpost, reducing vibration and improving surface finish in serial turning tasks. This results in fewer reworks and more predictable cycle times on production lines. Easy, secure clamping and simple maintenance Clamping is performed with an M2.5x7 Torx screw tightened using a T8 Torx key, a straightforward routine that keeps tool changeover times low and maintenance predictable. The connection system is engineered to retain the insert precisely, preventing micro-movement that can compromise tool life. The head’s measured overall length 40 mm and modest weight of 0.24 kg make the holder easy to position and handle during tool setup, while the robust fastening minimises the need for frequent readjustment. Designed for durable performance in metalworking Built for demanding machining, the tool head supports high-grade steel machining and is intended to deliver long tool life under steady cutting conditions. The configuration accommodates up to six cutting edges in its operational concept, enabling efficient use of inserts and dependable performance across repetitive cuts. The compact footprint and sturdy construction help maintain cutting parameters and contribute to predictable dimensional outcomes, which is essential in batch production and contract machining environments. Practical benefits for production workflows Integrating this holder into a tooling system simplifies inventory by standardising on the LNMT 0804 insert family and ISCAR-compatible geometries. The combination of a compact shank, secure clamping, and 90° geometry supports faster cycle-to-cycle consistency and reduces downtime associated with complex tool changes. These rational advantages translate into economic gains through improved throughput and lower scrap rates, making the component a pragmatic choice for workshops and manufacturing facilities aiming for operational reliability. For application guidance, stock availability or to arrange a purchase through Metav Werkzeuge, contact our team in Emmerich — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com — Metav’s consultants will assist with compatibility and selection advice Technical Data Article number: T222TM Product: Angle tool head for LNMT 0804 indexable inserts Manufacturer: Teknik Makina Key dimensions Shank diameter (mm): 16 Head diameter (mm): 40 Overall length (mm): 40 Weight (kg): 0.24 Cutting geometry: 90° Cutting edges: 6 Special features Compatible with LNMT 0804 indexable inserts Suitable for ISCAR insert types Fastening: M2.5x7 Torx screw Torx key size required: T8 FAQ Is this tool head compatible with ISCAR inserts? Yes. The angle tool head is compatible with LNMT 0804 indexable inserts and is specified to work with ISCAR insert types for straightforward integration. What is the shank size and will it fit standard toolposts? The holder has a 16 mm shank diameter; this size suits compact toolpost setups and is common in small to medium turning applications. How is the insert secured in the holder? Insert retention is via an M2.5x7 Torx screw; the screw is tightened using a T8 Torx key to ensure a secure, vibration-resistant fit. Can the head be used for heavy steel turning? The design supports high-grade steel machining and is intended for robust performance with good tool life when used within recommended cutting parameters. What is the SKU and manufacturer for ordering? The SKU is T222TM and the product is supplied by Teknik Makina; orders and technical enquiries can be placed through Metav Werkzeuge for European distribution. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Precision 90° Square Turning Head For BOMT 1304 Indexable Inserts, M3.5x8.5 Torx T10 - Teknik Makina
Take advantage of the combination of precise 90° geometry, a compact 16 mm shank and compatibility with BOMT 1304 indexable inserts for reliable, low-downtime machining; order the corner tool head directly via Metav Werkzeuge or contact their consultants for tailored advice. Corner tool head 90° for BOMT 1304 indexable inserts — Teknik Makina, compact 16 mm shank The corner tool head provides orthogonal cutting for milling and turning applications, designed to accept BOMT 1304 indexable inserts for stable edge engagement in small, high‑precision set-ups 90° cutting angle for orthogonal machining Compatible with BOMT 1304 inserts (Ingersoll) 16 mm shank; compact 40 mm overall length Torx fastening M3.5x8.5, key T10 Consistent geometry for repeatable precision The compact design with a 90° cutting angle ensures a controlled cutting direction and predictable chip evacuation, which is particularly beneficial for short‑overhang set‑ups. The solid 16 mm shank supports torsional rigidity and reduces vibration, so the tool path is maintained and surface finish is improved. By keeping the toolholder geometry stable, tool life of the insert is extended and cycle times remain consistent — a rational investment in process stability rather than guesswork. Technical terms: the 90° angle means the cutting edge meets the workpiece at right angles, helping to simplify tool offsets and program routines on CNC machines. Fast insert changes and straightforward integration Compatibility with BOMT 1304 indexable inserts and a single M3.5x8.5 Torx screw secured with a T10 key enables quick insert replacement and secure clamping. This reduces machine downtime during tool changes and simplifies inventory management when BOMT 1304 inserts are already in use. The head is supplied ready for direct mounting on a 16 mm holder bore, so set‑up time is minimised and integration into existing tool assemblies is uncomplicated. Clear maintenance routines can be established because insert replacement and screw torque are standardised. Robust compatibility and operational benefits Designed to accept four cutting edges and to mate with Ingersoll‑type inserts, the holder offers pragmatic benefits for workshops seeking repeatable results with common insert families. The compact 40 mm overall length is advantageous in confined tool zones, while the construction provides reliable seating and clamping of the insert to preserve precision over repeated cycles. For production environments, this means fewer unplanned stops and a smoother production flow — a practical contributor to overall equipment effectiveness. The component is suitable where orthogonal cutting with small‑format holders is specified and where a compact assembly reduces interference. For tailored procurement or application advice on this Teknik Cutting Tools corner tool head (SKU T965TM), contact Metav Werkzeuge in Emmerich for availability and fast delivery: info@metav-werkzeuge.com, +49 2822 7131930 — Metav’s consultants will assist with selection and logistics. Technical Data Article number: T965TM Product: Corner tool head 90° for BOMT 1304 indexable inserts Manufacturer: Teknik Makina Dimensions & Weight Shank diameter: 16 mm Diameter: 40 mm Total length: 40 mm Weight: 0.272 kg Cutting angle: 90° Cutting edges: 4 Features & Compatibility Compatible with BOMT 1304 indexable inserts Suitable for Ingersoll insert systems Torx screw M3.5x8.5; Torx key T10 Compact design for reduced overhang FAQ Which inserts fit this tool head? The corner tool head is compatible with BOMT 1304 indexable inserts and is designed to accept Ingersoll‑type BOMT 1304 inserts. What is the required shank diameter for mounting? Mounting requires a 16 mm shank bore; the holder is optimised for a 16 mm clamping diameter. How is the insert secured in place? The insert is clamped with an M3.5x8.5 Torx screw tightened using a T10 key to ensure secure seating. Is the holder suitable for confined tool arrangements? Yes; the compact 40 mm overall length and 16 mm shank make the holder well suited to installations with restricted clearance. What is the SKU and who manufactures the part? The SKU is T965TM and the part is supplied by Teknik Makina; Metav Werkzeuge can provide delivery and procurement support. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Precision Corner Turning Head 90° for APMT 1604 Indexable Inserts, 4 Cutting Edges, 16mm Shank - Teknik Makina
Take advantage of the precise 90° geometry and secure 16 mm shank for consistent turning results; the compatibility with APMT 1604 indexable inserts and Korloy grades ensures simple tool change and broad material coverage — order via Metav Werkzeuge or consult our specialists for process-matched advice. Corner tool head T241TM — 90° turning head for APMT 1604 indexable inserts (Teknik Makina) Corner tool head T241TM for turning and facing operations, designed to accept APMT 1604 indexable inserts and to fit tool posts with a 16 mm shank 90° cutting angle for precise turning Compatible with APMT 1604 inserts 16 mm shank for secure clamping Torx fixing M4x10 with T15 key Consistent cutting geometry for repeatable results The 90° cutting angle of this turning head delivers defined contact conditions between insert and workpiece, which helps to maintain a stable cutting line and predictable chip flow. Fitting APMT 1604 indexable inserts means the insert seating and rake geometry are standardised, so set-up times are reduced and tool life can be managed more reliably. The head’s compact form factor and standardised interface make it suitable for small to medium turning tasks in production and maintenance environments, where repeatability and setup speed are central to efficiency. Secure mounting and quick insert changes A 16 mm shank diameter provides a robust connection to the tool holder or turret, reducing vibration and improving surface finish when the assembly is correctly clamped. The insert is secured with a M4x10 Torx screw, accessed with a T15 key, enabling rapid insert replacement without special tooling. For workshop personnel unfamiliar with indexable tooling: the screw size defines the clamping torque range and the Torx drive reduces the risk of cam-out, which contributes to consistent clamping force and longer service life of the fastening elements. Practical compatibility and application range Engineered for use with APMT 1604 inserts from major suppliers such as Korloy, this head supports common grades used for steel, stainless steel and cast materials; selecting the correct insert grade and geometry will determine performance on specific materials. The tool head’s Ø40 mm footprint and 45 mm overall length keep clearance requirements modest while still providing four usable cutting edges per insert, which is economical for batch work. The recorded mass of 0.258 kg reflects a compact design that is easy to handle during tool changes and inventory management. Why this holder suits a modern workshop Using standardised insert formats and conventional fastenings simplifies procurement and stocking: a workshop can keep a small range of insert grades and rely on the same basic holder geometry across multiple machines. The combination of a clear 90° geometry, a 16 mm interface and Torx clamping delivers a balance of precision, serviceability and robustness — attributes that support throughput and reduce unexpected downtime. For process planners, this means fewer variables to adjust during set-up and more consistent part quality from the first piece. Consult Metav Werkzeuge for tailored holder recommendations and swift supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T241TM Manufacturer: Teknik Makina For: APMT 1604 indexable inserts Compatible insert manufacturer: Korloy Core measurements Diameter: 40 mm Overall length: 45 mm Shank diameter: 16 mm Weight: 0.258 kg Cutting angle: 90° Cutting edges: 4 Features & fittings Torx screw: M4x10 Torx key: T15 Accepts APMT 1604 inserts Compact turning head design FAQ What insert format does this turning head use? The head is designed for APMT 1604 indexable inserts and seats standard APMT plates for a reliable fit. Is the holder compatible with Korloy inserts? Yes, the design is compatible with inserts from Korloy as indicated in the product specification for T241TM. What toolholder connection is required? The turning head has a 16 mm shank diameter and is intended for tool posts or turrets that accept this dimension. How is the insert secured? Insertion is secured by a M4x10 Torx screw, tightened with a T15 key for consistent clamping force. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Round Insert Milling Cutter for RDMT 1003 Indexable Inserts, 3 Cutting Edges, M3.5 Clamp Screw - Teknik Makina
Compact 40 mm face mill with three cutting edges and a 16 mm shank for stable, efficient machining; take advantage of its quick insert changes and robust fastening system — order the Round Insert Milling Cutter T288TM directly via Metav Werkzeuge or ask our consultants if needed. Round Insert Milling Cutter T288TM – Ø40 mm, 3 cutting edges | Teknik Makina The Round Insert Milling Cutter T288TM is a compact milling tool designed for face milling operations using round indexable inserts, ideal for short overhangs and demanding, repeatable cuts. Ø40 mm cutting diameter 3 cutting edges for steady material removal Compatible with RDMT 1003 indexable inserts 16 mm shank and 40 mm overall length Increased rigidity for precise small-scale milling The cutter was engineered to deliver consistent results in constrained setups: its 16 mm shank and 40 mm overall length reduce deflection and vibration during machining, which leads to improved surface quality and repeatability. The moderate mass (0.208 kg) provides a balance between stability and low spindle load, so cycle times are kept efficient without compromising control. Efficient cutting concept with easy insert handling With an Ø40 mm tool diameter and 3 cutting edges, the design focuses on optimised chip load per tooth and smooth power draw. The head accepts RDMT 1003 indexable inserts, which are widely available and allow cost-effective regrinding or replacement. This approach reduces downtime: worn edges are replaced rather than the whole tool, improving tool-cost ratio in serial production. Fast clamping and maintenance for high uptime Insert retention and replacement are straightforward thanks to standardised fastenings. The clamping screw is M3.5, the torx screw specification is M3.5x8.5, and the tool is supplied for tightening with a T15 Torx key. These standard sizes permit quick tool changes with commonly available tools, reducing maintenance time and keeping spindle availability high — a clear operational benefit for lean workflows. Compact suitability for focused face-milling tasks The cutter is tailored for operations where space is at a premium but precision remains essential. Its geometry and three-flute layout support stable cutting in short-reach milling and light to medium material removal rates. For workshops and CNC cells that favour indexable round inserts for flexibility and cost management, this tool provides a compact, dependable option that integrates easily into existing tool sets. For precise compact milling tasks, request the Teknik Makina T288TM via Metav Werkzeuge — contact Metav’s specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored technical advice and order guidance. Technical Data Article number: T288TM Manufacturer: Teknik Makina For: RDMT 1003 Indexable Inserts Core specifications Diameter: 40 mm Cutting edges: 3 Overall length: 40 mm Shank diameter: 16 mm Weight: 0.208 kg SKU: T288TM Special features Compatible with RDMT 1003 indexable inserts Clamping screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 Compact design for short overhangs FAQ How does the cutter secure the indexable inserts? The cutter uses a clamping screw (M3.5) and a torx screw (M3.5x8.5) to retain RDMT 1003 inserts securely; the retention system on the T288TM is designed for straightforward replacement and stable seating. Is the tool suitable for CNC finishing passes? Yes, the three-edge layout and compact geometry of the T288TM make it suited to controlled finishing and light material removal where surface quality and stability matter. What is the shank size and why does it matter? The shank diameter is 16 mm; a thicker shank relative to overall length helps reduce runout and vibration, improving precision and tool life in short-reach milling operations. Can common Torx tools be used for insert changes? Insert changes are performed with a standard T15 Torx key and M3.5 screws, enabling quick maintenance using widely available toolsets. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Round Insert Milling Cutter for RDMT 1003 Indexable Inserts, 4 Flutes, 16mm Shank - Teknik Makina
The combination of a 40 mm cutting diameter, four cutting edges and compatibility with RDMT 1003 indexable inserts provides efficient material removal with predictable tool life; order the round insert milling cutter directly via Metav Werkzeuge or ask the consultants for holder recommendations and spare‑part guidance. Round insert milling cutter T289TM — 40 mm diameter, 4 cutting edges, for RDMT 1003 indexable inserts (Teknik Makina) The Round insert milling cutter T289TM is a compact indexable‑insert cutter designed for productive face milling and light slotting operations where quick insert changes and stable cutting are required. 40 mm cutting diameter Four cutting edges for balanced cuts Compatible with RDMT 1003 inserts Ø16 mm shank for standard holders Stable removal rates and consistent surface quality With a 40 mm diameter and four cutting edges, this milling cutter delivers a balanced cutting action that reduces vibration and supports steady chip formation. The geometry of the tool head is designed to distribute cutting forces across multiple edges, which helps to maintain tool balance during higher feed rates. Reduced vibration contributes to improved surface finish and repeatable results in series production, making the tool suitable for shops aiming for consistent output and lower scrap rates. The cutter’s modest 0.22 kg weight also reduces spindle load and inertia during acceleration and direction changes. Fast insert changes that cut downtime The T289TM accepts RDMT 1003 indexable inserts, enabling rapid replacement of worn cutting edges rather than full‑tool changes. Indexable inserts keep running costs predictable and minimise inventory of complete cutters; only the small inserts are stocked and replaced. The insert system is particularly useful for operations with frequent tool wear cycles, as insert swap‑outs are quick, require minimal setup time and reduce machine downtime compared with solid tools. This approach supports efficient production planning and a lower total cost of ownership for repetitive milling tasks. Secure clamping and straightforward mounting A secure interface is provided by a Ø16 mm shank, which fits standard collets and holder systems, and by the specified fastenings: locking screw M3.5, Torx screw M3.5x8.5 and Torx key size T15. These details ensure that the cutting head remains rigidly fixed during machining, reducing axial play and improving positional accuracy. The defined fastener sizes simplify maintenance and spare‑part procurement: a T15 driver is sufficient for insert changes and routine checks, and the standard screw sizes match common workshop tool sets. Integration into production and supplier assurance Designed for use with RDMT 1003 inserts, this indexable cutter integrates easily into existing tool plans and holder inventories. Its standardised dimensions make it straightforward to fit into modular tool systems without extensive requalification. For procurement, Metav Werkzeuge provides a central source in Europe with a broad selection of metrology and tooling products; the Emmerich site acts as a quality filter and logistics hub, supporting reliable supply and consistent product quality for industrial and trade customers. For fast, reliable adaptation to indexable‑insert milling, contact Metav Werkzeuge for technical advice on the T289TM round insert milling cutter and suitable holder options at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data SKU: T289TM Manufacturer: Teknik Makina Name: Rundplattenfräser / for RDMT 1003 Indexable Inserts Facts Diameter: 40 mm Cutting edges: 4 Overall length: 40 mm Shank diameter: Ø16 mm Weight: 0.22 kg Torx screw: M3.5x8.5 Locking screw: M3.5 Torx key: T15 Special features Compatible inserts: RDMT 1003 Suitable for indexable‑insert milling eClass: 21180902 ETIM: EC011860 SKU: T289TM FAQ Which insert type fits this cutter? The cutter accepts RDMT 1003 indexable inserts; this compatibility is specified for the T289TM from Teknik Makina. How many cutting edges does it have and what is the diameter? The tool is equipped with four cutting edges and a 40 mm cutting diameter. What is the shank size and how does that affect holder choice? The shank diameter is Ø16 mm; holders and collets matching this diameter are required for secure mounting. Which fasteners and driver are specified for insert clamping? Insert clamping uses a locking screw M3.5 and a Torx screw M3.5x8.5; the corresponding driver size is T15. Can this cutter be used with existing indexable insert inventories? Yes — compatibility with RDMT 1003 inserts allows integration with systems already using that insert type, simplifying tooling management. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Planflächen schneller und präziser herstellen
Planfräser, auch als Planfräswerkzeug oder Stirnplanfräser bezeichnet, sind meist mit Wendeschneidplatten bestückte Trägerwerkzeuge für Fräsmaschinen. Sie ermöglichen das großflächige Abtragen von Material, das Planfräsen von Werkstücken auf Maß und die Erzeugung einer gleichmäßigen, planaren Oberflächenstruktur.
Wie das Planfräswerkzeug technisch wirkt und wann es unabdingbar ist
Ein Planfräswerkzeug arbeitet offen auf der Materialoberfläche, sodass Späne radial abgeführt werden. Bei Ausführungen ohne Innenkühlung erfolgt die Wärme- und Spanableitung über externe Kühlmitteldüsen oder zugeführte Druckluft; das ist bei vielen regulären Planfräsarbeiten ausreichend. Modelle mit Innenkühlung verfügen über integrierte Bohrungen und Kanäle, die Kühlschmierstoff oder Blasluft direkt an die Schneidkanten leiten. Diese gezielte Zufuhr verhindert thermische Überlastung, reduziert Aufbauschneidenbildung und spült Späne zuverlässig aus der Schnittzone – entscheidend bei schwerzerspanenden, klebenden Werkstoffen oder sehr großen Schnittbreiten.
Mehr Effizienz im Werkstattalltag durch gezielten Einsatz
- Reduziert Rüstzeiten durch modulare Bestückung mit Wendeschneidplatten und einfachem Plattenwechsel.
- Verbessert die Oberflächengüte durch gleichmäßige Spanabfuhr und, bei Bedarf, gezielte Innenkühlung.
- Erhöht die Standzeit der Werkzeuge, weil thermische Belastung und Aufbauschneidenbildung minimiert werden.
- Sorgt für konstante Maßhaltigkeit bei großflächigen Bearbeitungen dank stabiler Trägerwerkzeuge.
Metav als zuverlässiger Partner für Ihre Planbearbeitung
Metav steht für Demokratisierung der Präzision und kombiniert jahrzehntelange Fachkompetenz mit einem breiten Sortiment. Aus dem Lager in Emmerich liefert Metav als Qualitätsfilter ein Sortiment, das Werkstätten und Industrie mit technisch passenden Planfräsern versorgt. Mit über 48.000 zufriedenen Kunden und mehr als 250.000 Produkten bietet Metav die Auswahl und Verfügbarkeit, um die passende Ausführung — mit oder ohne Innenkühlung — für Ihre Bearbeitungssituation zu finden.
Kurz und prägnant
Ein Planfräser ist das zentrale Werkzeug, wenn große, ebene Flächen schnell, maßhaltig und mit hoher Oberflächenqualität herzustellen sind. Die Wahl zwischen ohne Innenkühlung und mit Innenkühlung richtet sich nach Werkstoff, Schnittbreite und Wärmeentwicklung.
FAQ
Wann ist ein Planfräser mit Innenkühlung erforderlich?
Bei schwerzerspanenden oder stark wärmeentwickelnden Werkstoffen sowie bei sehr großen Schnittbreiten empfiehlt sich ein Planfräser mit Innenkühlung, weil die gezielte Kühlschmierstoffzufuhr thermische Überlastung und Aufbauschneidenbildung verhindert.
Reicht bei normalen Stahlblechen ein Planfräswerkzeug ohne Innenkühlung aus?
Für viele reguläre Planfräsarbeiten an unlegierten und niedrig legierten Stählen ist ein Planfräswerkzeug ohne Innenkühlung ausreichend, da Späne offen radial abfließen und externe Kühlmitteldüsen oder Druckluft die Wärmeableitung übernehmen.
Wie verlängert man die Standzeit von Planfräsern effektiv?
Die Standzeit eines Planfräswerkzeugs lässt sich durch passende Wendeschneidplatten, richtige Schnittparameter, konsequente Spanabfuhr und bei Bedarf durch Innenkühlung deutlich erhöhen.
Welche Vorteile bieten modulare Planfräswerkzeuge im Produktionsalltag?
Modulare Planfräser ermöglichen schnellen Plattenwechsel, reduzieren Rüstzeiten und erlauben die Anpassung an unterschiedliche Schnittbreiten und Werkstoffe ohne kompletten Werkzeugwechsel.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com