Planfräser für schnelle, plane Flächenbearbeitung
Planfräser sind speziell entwickelte Trägerwerkzeuge zum großflächigen Abtrag und exakten Planfräsen von Werkstücken und verbessern die Oberflächenqualität sowie die Prozessstabilität bei der Bearbeitung von Stahl, Guss und NE-Metallen; sie kommen sowohl in offener Ausführung ohne Innenkühlung als auch als innengekühlte Varianten zum Einsatz, wobei die innengekühlte Version durch gezielte Kühlmittelzufuhr thermische Überlastung verhindert und die Standzeit erhöht. Die Werkzeuge dienen dazu, große Schnittbreiten effizient zu bearbeiten und durch optimale Spanabfuhr eine gleichmäßige Oberfläche zu erzeugen, wobei die offene Ausführung einfache Fräsaufgaben mit externer Kühlung abdeckt. Planfräser bieten besonders bei schwer zerspanbaren, wärmeempfindlichen oder klebenden Werkstoffen Vorteile, weil die innengekühlte Bauform die Bildung von Aufbauschneiden reduziert und die Oberflächengüte verbessert.
40mm Corner Turning Head for BOMT 1304 Indexable Inserts with Internal Coolant, 90° - Teknik Makina
Take advantage of a compact, robust turning solution that combines 40 mm diameter precision, internal coolant and compatibility with BOMT 1304 indexable inserts to keep cycle times consistent and maintenance straightforward. Order directly via Metav Werkzeuge or contact our consultants for application advice. Corner turning head T965-1TM — 40 mm, internal coolant (Teknik Makina) Corner turning head T965-1TM is a compact turning tool head designed for shoulder and face machining with BOMT 1304 indexable inserts, offering internal coolant and a secure Torx fastening system. 40 mm diameter for compact turning Internal coolant for improved chip evacuation Compatible with BOMT 1304 indexable inserts Four cutting edges for longer tool cycles Small footprint, consistent productivity The 40 mm diameter design delivers a compact solution for confined tool stations without compromising rigidity. With a short overall length of 40 mm and a 16 mm shank, the head minimises overhang and reduces vibration, which translates directly into steadier surface finishes and longer insert life. The integrated 90° cutting angle supports accurate shoulder turning and face milling tasks while the balanced geometry maintains cycle-time stability on series parts. Improved cooling and chip control for reliable machining Built-in internal coolant supplies cutting fluid directly to the cutting edge, improving heat dissipation and chip evacuation in continuous operations. This directed cooling reduces thermal load on the insert and cutting edge, helping to preserve cutting performance under elevated cutting conditions. The internal coolant feature is particularly valuable for materials that require controlled heat management, and it simplifies coolant routing in multi-spindle setups. Broad compatibility and straightforward assembly Designed for use with BOMT 1304 indexable inserts, the head ensures rapid insert changes and predictable seating. Compatibility with Ingersoll-style inserts increases flexibility across existing tool inventories. Fastening is secured via a T10 Torx key and M3.5x8.5 screw, providing positive clamping and easy maintenance during shift changes. The unit’s modular interface enables quick replacement of worn heads to reduce machine downtime. Durable construction and easy handling At approximately 0.272 kg, the head is light enough for rapid handling yet engineered for the demands of industrial turning. The four cutting edges extend service intervals by permitting multiple indexings before replacement. Simple mechanical features and standardised fastening tools reduce service time, while the compact form supports high-density turret arrangements for efficient shop-floor layouts. Contact Metav Werkzeuge today for tailored technical advice and reliable supply of the Teknik Makina corner turning head T965-1TM — reach us at info@metav-werkzeuge.com or +49 2822 7131930 for fast, dependable service. Technical data SKU: T965-1TM Manufacturer: Teknik Makina Product type: Corner turning head Label: 40mm Eckmesserkopf BOMT 1304 L40mm mit Innenkühlung UID: T965-1TM Key dimensions Diameter: 40 mm Overall length: 40 mm Shank diameter: 16 mm Weight: 0.272 kg Cutting edges: 4 Cutting angle: 90° Torx key: T10 Torx screw: M3.5x8.5 Special features Internal coolant Compatible with BOMT 1304 indexable inserts Compatible with Ingersoll insert holders Short overall length for reduced overhang Four usable cutting positions FAQ What inserts does this head accept? The corner turning head accepts BOMT 1304 indexable inserts and is compatible with insert systems from Ingersoll, enabling straightforward integration into existing tooling setups. Is there internal coolant and how is it delivered? Yes, the tool head features internal coolant that is routed to the cutting zone to improve heat control and chip evacuation during turning operations. Which fastening tools are required for assembly? Assembly and insert clamping use a T10 Torx key and an M3.5x8.5 screw for secure, repeatable fixation of the insert seat. What applications suit this tool head best? The head is ideal for shoulder and face turning where a 40 mm compact diameter and a 90° cutting angle provide accurate, space-efficient machining — particularly in multi-station turrets or confined toolholders. How many cutting edges are available before replacement? The design provides four cutting edges, allowing multiple indexings to extend the service interval and reduce tooling costs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Corner Turning Head for BOMT 1304 Indexable Inserts with Internal Coolant, 90° Cutting Angle - Teknik Makina
Take advantage of proven compatibility with BOMT 1304 inserts, internal coolant and a compact 40 mm diameter to improve process stability and cycle time; order the tool directly via Metav Werkzeuge or consult our specialists for application-specific advice. Corner turning head (for BOMT 1304 Indexable Inserts) T965-2TM — 40 mm, internal coolant — Teknik Makina The Corner turning head is a compact, coolant-fed tool head intended for square-shoulder turning and profiling with BOMT 1304 indexable inserts in CNC turning centres and toolroom lathes. 40 mm diameter for compact set-ups Internal coolant for controlled chip evacuation Compatible with BOMT 1304 indexable inserts 90° cutting angle for square-shoulder machining Reliable square-shoulder performance with coolant support The compact design and 40 mm diameter create a low-overhang holder that reduces vibration and improves surface finish during shoulder cuts. The integrated internal coolant supply directs cutting fluid to the insert seat, slowing thermal build-up and enabling longer, more consistent cutting performance. This stabilising effect is particularly relevant for medium-duty turning operations where repeatable tolerances and surface integrity are required. The tool head delivers a predictable machining environment, supporting higher first-pass yields and fewer rework cycles. Secure clamping and service-friendly fastenings Designed for a secure interface, the head features a 16 mm mounting diameter and a dedicated fastening system using Torx T10 and M3.5x8.5 screws for positive clamping. The robust connection reduces micro-movement between holder and spindle, translating into consistent tool geometry and repeatable results. Replacement of worn or damaged BOMT 1304 inserts is straightforward thanks to the indexed insert design; insert changes are rapid and require only the listed Torx key, keeping downtime to a minimum and maintenance procedures simple to train. Compatibility, tool life and process efficiency Compatibility with BOMT 1304 indexable inserts and recognised insert manufacturers (Ingersoll compatibility indicated) gives flexibility in selecting grades and geometries for steel, alloyed materials and general shop applications. The 90° cutting angle makes the head ideal for shoulder milling and turning where square corners are required, while the internal coolant reduces built-up edge formation and extends insert life. Together, these features support an improved cost-per-component metric in production runs and a measurable reduction in tool-change frequency. Practical applications and workshop suitability The tool head is suited to job shops, subcontract manufacturers and production lines requiring compact, coolant-fed turning solutions. With a lightweight design (approx. 0.272 kg) and a 40 mm overall length, it fits tight tooling envelopes and reduces centrifugal loads at speed. The holder is recommended where consistent shoulder geometry and process repeatability are priorities; its straightforward mechanical interface simplifies inventory management and standardises holders across compatible turning programmes. For application guidance or to source compatible inserts and accessories, contact Metav Werkzeuge for personalised advice and supply from Emmerich. Technical data SKU: T965-2TM Name: Corner turning head for BOMT 1304 indexable inserts Manufacturer: Teknik Cutting Tools (Teknik Makina) ECLASS: 21181015 Core data Diameter: 40 mm Overall length: 40 mm Weight: 0.272 kg Mounting diameter: 16 mm Cutting angle: 90° Number of cutting positions: 5 Torx key: T10 Torx screw: M3.5x8.5 Special features Internal coolant: yes Compatible inserts: BOMT 1304 Compatible insert manufacturer: Ingersoll Product type: Corner turning head SKU: T965-2TM FAQ How does the internal coolant improve machining with this head? Internal coolant directs cutting fluid to the insert seat and cutting zone, reducing thermal stress and chip adhesion; the Corner turning head with internal coolant helps prolong insert life and stabilise surface finish. Which inserts fit this tool head? This holder is designed for BOMT 1304 indexable inserts and is compatible with inserts from the listed manufacturers such as Ingersoll, enabling selection of grades tailored to the workpiece material. What are the mounting and fastening details? The holder uses a 16 mm mounting diameter and secures with Torx T10 fastenings and M3.5x8.5 screws for positive clamping and straightforward maintenance. Is the tool suitable for heavy interruption or roughing cuts? The head is optimised for square-shoulder turning and profiling with a 90° cutting angle; while capable in many shop applications, selection of insert grade and cutting parameters should match the intended roughing or finishing task. What is the SKU and who manufactures the tool? The SKU is T965-2TM and the tool is manufactured by Teknik Cutting Tools (Teknik Makina). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Corner Turning Head for LNGX 1307 Indexable Inserts, Internal Coolant, 45mm - Teknik Makina
Combine a compact 40 mm footprint with internal coolant and a precise 90° cutting angle to increase machining stability and extend insert life — ideal for short overhangs and repeatable corner operations. Order the corner cutting head directly via Metav Werkzeuge or ask our consultants if needed. Corner cutting head T488-1TM – 40 mm diameter, internal coolant, for LNGX 1307 Indexable Inserts (Teknik Makina) A corner cutting head engineered for precision indexable-insert machining with LNGX 1307 inserts, optimised for compact toolholders and coolant-through operation. 40 mm diameter for compact operations Internal coolant for improved chip evacuation Compatible with LNGX 1307 Walter inserts 90° cutting angle with three cutting edges Precision where corner cuts matter The compact tool head provides a stable platform for repeatable corner cuts thanks to its 40 mm diameter and a short overall length of 45 mm. The combination of a rigid geometry and a defined 90° cutting angle reduces deflection and vibration, which directly improves surface finish and dimensional repeatability. Designed for use with LNGX 1307 indexable inserts, the head offers consistent seat positioning so that insert indexing remains accurate cycle after cycle. These factors translate into measurable productivity gains on small to medium workpieces where precision and stability are essential. Coolant-through design to protect inserts and workpieces Integrated internal coolant channels deliver cutting fluid directly to the insert seat and cutting edge, promoting efficient chip removal and localised cooling. Because heat is expelled close to the cutting zone, insert wear is reduced and machining parameters can often be pushed without compromising tool life. The direct coolant feed is particularly beneficial when machining interrupted cuts or when chip evacuation is critical; the result is fewer rework cycles and longer uninterrupted production runs. This feature supports higher process reliability in mixed-batch environments. Secure clamping and quick serviceability Service and changeover are simplified by a robust fastening system: a M4x11 Torx screw secured with a T15 key ensures reliable clamping and repeatable seating of the insert. The head accepts three cutting edges, allowing multiple index positions before replacement, which reduces downtime and inventory pressure. The shorter overhang (overall length 45 mm with a 16 mm shank) improves stiffness and makes the head suitable for compact toolholders where accessibility and clearance are limited. Maintenance routines become faster and more predictable with this straightforward fixing concept. Practical benefits for workshops and production lines This cutting head is a fit-for-purpose option where compactness and coolant capability are required together with compatibility to established insert systems from Walter. The T488-1TM delivers a balance of rigidity, cooling efficiency and simple handling that supports lean workflows and reduces tool-change frequency. For buyers seeking to consolidate tooling, the head’s standard interface and familiar Torx fastening facilitate integration into existing setups. For complex applications or non-standard toolholders, Metav’s specialists can provide guidance on suitable adapters and mounting strategies. For purchase enquiries or technical clarification on the Teknik Makina T488-1TM corner cutting head — including compatibility with existing holders and recommended operating parameters — contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for expert assistance and ordering support. Technical data SKU: T488-1TM Product type: Corner cutting head Item label: 40mm Eckmesserkopf LNGX 1307 L45mm mit Innenkühlung Manufacturer: Teknik Makina ECLASS: 21181015 Core technical data Diameter: 40 mm Overall length: 45 mm Shank diameter: 16 mm Weight: 0.304 kg Number of cutting edges: 3 Cutting angle: 90° Materials & special features Internal coolant: yes Compatible inserts: LNGX 1307 Compatible insert manufacturer: Walter Torx key: T15 Torx screw: M4x11 FAQ Which inserts fit this head? The corner cutting head accepts LNGX 1307 indexable inserts; compatibility is specified for inserts from Walter. Is the coolant routed through the head? Yes — the toolhead features internal coolant, supplying cutting fluid directly to the insert seat for improved chip evacuation and cooling. What shank size is required for mounting? The head is supplied with a 16 mm shank diameter and a short overall length of 45 mm, suitable for compact toolholders. How is the insert secured? Inserts are fixed with a M4x11 Torx screw using a T15 key, providing secure clamping and repeatable seating. Is this head suitable for long overhangs? The design prioritises rigidity with a compact footprint (40 mm diameter, 45 mm overall length); for long overhangs, a more extended toolholder may be necessary. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Corner Turning Head For R390 11 Indexable Inserts With Internal Coolant, 16mm Shank - Teknik Makina
Take advantage of a compact, coolant-fed design and precise compatibility with R390 11 indexable inserts to improve cycle consistency and tool life; order the component through Metav Werkzeuge or contact our advisors for application support. Corner tool head for R390 11 indexable inserts — 40 mm, internal coolant (Teknik Makina) The corner tool head for R390 11 indexable inserts delivers a compact, coolant-assisted solution for precision turning and facing operations in industrial workshops. 40 mm diameter for compact installations Integrated internal coolant for effective cooling Compatible with R390 11 Sandvik indexable inserts Secure Torx fastening for repeatable clamping Consistent cooling and longer tool life for uninterrupted production The compact head is engineered around a 40 mm envelope and internal coolant, providing targeted lubrication directly at the cutting zone. This combination reduces tool temperature, diminishes built-up edge and improves chip control — concrete benefits for cycle stability and tool life in repetitive turning tasks. Compatibility with R390 11 indexable inserts means established insert geometries and grades can be used, allowing predictable cutting data and easier inventory management. The result is fewer unscheduled stoppages and a more consistent output quality across batches. Fast insert changes and reliable clamping for reduced downtime A deliberate design focus on serviceability means insert changes remain quick and repeatable. The head uses a Torx T8 drive and M2.5x7 Torx screw for secure retention, ensuring a consistent clamping interface and minimal setup variation between tool changes. With five cutting edges and a 90° cutting orientation, the component supports robust engagement and straightforward indexing strategies. For workshops that measure productivity in minutes saved per changeover, this combination reduces operator time and increases effective machining uptime. Built for workshop supply chains that require traceability and fit At just 0.225 kg and an overall length of 40 mm, the tool head is light and compact without compromising rigidity. Manufactured by Teknik Makina and matched for Sandvik insert systems, it suits environments where standardisation and interchangeability are priorities. The compact mass lowers centrifugal loads at higher spindle speeds, while the standardised insert fit keeps stocking and procurement simple. If the application is precision external turning, profiling or face finishing, the head offers a dependable, repeatable option that integrates into established tooling systems. For specification checks or a tailored recommendation for Teknik Makina turning heads, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to request a technical datasheet and delivery options. Technical data SKU: T577-1TM Manufacturer: Teknik Makina eClass: 21181015 Facts Diameter: 40 mm Overall length: 40 mm Weight: 0.225 kg Number of cutting edges: 5 Cutting angle: 90° Torx key: T8 Torx screw: M2.5x7 Internal coolant: yes Special features Compatible with R390 11 indexable inserts Matched for Sandvik insert geometry Compact, rigid design for shop-floor use Designed for precision turning and facing FAQ Which insert types fit this tool head? The head is designed to accept R390 11 indexable inserts and is specified for Sandvik-compatible insert geometries. Is internal coolant available on the tool head? Yes, the component features internal coolant to deliver cutting fluid directly to the cutting edge for improved cooling and chip control. What is the fastening method for the insert? Insert retention uses a Torx T8 drive with an M2.5x7 Torx screw for secure and repeatable clamping. Can the head be used for profiling and external turning? The head’s 90° cutting orientation and compact design make it suitable for both external turning and face profiling tasks where standard R390 11 inserts are applicable. Who supplies the tool head and where can it be ordered? The head is produced by Teknik Makina (SKU T577-1TM) and can be procured via Metav Werkzeuge for immediate consultation and supply. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Corner Turning Head For VCGT 1604 Indexable Inserts L52mm With Internal Cooling - Teknik Makina
Benefit from precise turning performance and reduced downtime thanks to the combination of VCGT 1604 compatibility and internal coolant; the robust 90° cutting angle and Torx clamping enable rapid insert changes and consistent component quality. Order the tool directly via Metav Werkzeuge or request consultancy for application matching. Eckmesserkopf – 40 mm corner cutting head for VCGT 1604 with internal coolant (Teknik Makina) The Eckmesserkopf is an angled indexable insert head designed for finishing and shoulder turning with VCGT 1604 inserts, offering a compact 40 mm diameter and internal coolant for improved tool life. 40 mm cutting head diameter Compatible with VCGT 1604 inserts Internal coolant for improved tool life Torx M4x10 clamping with T15 key Stable geometry for predictable turning results The tool head’s 90° cutting angle and compact 40 mm diameter provide a stable cutting geometry that supports consistent shoulder and profile work. Combined with the three cutting edges, the configuration delivers balanced loads during entry and exit cuts, which reduces vibration and enhances surface finish. The short L52 mm overhang helps maintain rigidity at the tool tip, translating into repeatable results on small to medium components while maintaining dimensional accuracy. Faster service intervals and extended insert life Integrated internal coolant supplies lubricant and cooling directly to the cutting zone, lowering temperatures and improving chip control at the insert corner. The result is extended insert life and fewer unscheduled tool changes, which raises net productivity on batch runs. Secure clamping via an M4x10 Torx screw and a T15 key enables quick insert replacement without specialised fixtures, reducing maintenance time and simplifying routine tool servicing. Workshop-ready design for efficient integration The indexable head’s moderate weight of 0.277 kg and compact dimensions make it simple to integrate into standard tool holders and turret systems. Compatibility with widely used VCGT 1604 inserts ensures broad material coverage when paired with the appropriate insert grades, while the proven mechanical clamping design maintains positional accuracy across repeated indexings. The robust construction supports consistent performance in production environments that require dependable turning solutions. Contact Metav Werkzeuge for tailored application advice on Teknik Makina turning heads and secure reliable supply from our Emmerich facility — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: T498-1TM Brand: Teknik Makina Product type: Corner cutting head Facts Diameter: 40 mm Total length: 52 mm Weight: 0.277 kg Cutting edges: 3 Special features Compatible inserts: VCGT 1604 Cutting angle: 90° Internal coolant: yes Torx screw: M4x10 Torx key: T15 FAQ Which insert type fits this head? The Eckmesserkopf accepts VCGT 1604 indexable inserts; Teknik Makina specifies this compatibility for reliable seating and cutting geometry (SKU T498-1TM). Does the head provide internal coolant? Yes — the corner cutting head features internal coolant to supply lubricant and cooling directly to the cutting zone, improving insert life and finish. What are the clamping details for the insert? Clamping is effected with an M4x10 Torx screw; a T15 key is used for tightening and insert changes on the Teknik Makina head (T498-1TM). What are the key dimensions to consider for turret integration? Key dimensions are 40 mm diameter and 52 mm total length, with a tool weight of 0.277 kg, suitable for compact setups and standard turrets. How many cutting edges does the tool head support? The head is configured with 3 cutting edges, providing stable engagement for shoulder and profile turning tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Corner Turning Head for XNKT 0604 Indexable Inserts With Internal Coolant, 90° - Teknik Makina
Take advantage of the combination of compact design, reliable internal coolant and proven compatibility with XNKT 0604 inserts for uninterrupted production. Order the component directly via Metav Werkzeuge or consult the Metav team for technical clarification. Corner tool head T853-1TM – 40 mm diameter, internal coolant (Teknik Makina) The Corner tool head T853-1TM is a compact turning head engineered for rigid shoulder and finishing operations using XNKT 0604 indexable inserts, with integrated internal coolant for improved chip control. 40 mm diameter for compact tooling Internal coolant for improved chip evacuation Compatible with XNKT 0604 indexable inserts Robust 90° cutting angle, six usable edges Space-saving rigidity that maintains process stability The compact 40 mm body offers a high stiffness-to-size ratio that benefits machines with limited turret clearance. Designed for precise shoulder work, the head’s 90° geometry provides consistent plunge and facing capability while the slim 40 mm diameter reduces overhang and vibration. Paired with standard XNKT 0604 inserts, the assembly maintains repeatable positioning and reduces set-up variation, which translates into fewer tool changes and improved cycle-time reliability. The low mass also eases handling and quick fixture changes on fast-turning lathes. Integrated cooling and chip management to protect tool life Equipped with internal coolant, the head supplies cutting fluid close to the cutting edge, assisting both chip evacuation and thermal control during higher feed rates. Delivering coolant directly to the insert interface helps maintain cutting-edge integrity and reduces built-up edge, which in turn supports a more stable surface finish and extends the effective life of indexable tips. For workshops increasing throughput or tackling tougher alloys, this cooling path reduces thermal shock and the risk of premature edge failure, supporting longer uninterrupted production runs. Quick maintenance and secure fastening for minimum downtime Assembly and maintenance are straightforward: the insert is clamped with an M3x7 Torx screw and requires a T8 driver for secure fixing. The head accepts inserts with six usable edges, allowing economical indexing before replacement. These standardised fastening elements simplify spare-part management and speed up insert changes on production lines. The head’s balanced design and modest weight make it suitable for frequent tool swaps without sacrificing repeatability, preserving machine uptime and lowering indirect labour costs. Recommended applications and supply reliability This tool head is intended for workshops and production environments that use XNKT 0604 indexable inserts and require compact, coolant-fed tooling for shoulder, facing and finishing operations. Compatible inserts are supplied by Korloy, ensuring a wide choice of grades for steel, stainless or general-purpose turning where insert selection dictates performance. For technical questions or to confirm suitability for specific materials and cutting conditions, Metav’s specialists are available to advise on insert grades, clamping torque and coolant pressure to match the machining task. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina corner tool head T853-1TM and secure reliable supply directly from Emmerich. Technical data SKU: T853-1TM Manufacturer: Teknik Makina ECLASS: 21181015 Product type: Corner tool head Facts Diameter: 40 mm Overall length: 40 mm Weight: 0.219 kg Cutting angle: 90° Cutting edges: 6 Special features Internal coolant For XNKT 0604 indexable inserts Compatible insert manufacturer: Korloy Torx key: T8 Torx screw: M3x7 FAQ What insert type fits this tool head? The corner tool head accepts XNKT 0604 indexable inserts; compatible grades from Korloy are commonly used for varied turning tasks. Does the head provide coolant supply to the insert? Yes, the T853-1TM features internal coolant delivering fluid close to the cutting edge for improved chip control and thermal stability. How many times can an insert be indexed in this system? The tool set-up accommodates inserts with six usable edges, enabling multiple indexings before replacement. Which fastener is used to secure the insert? Inserts are secured with an M3x7 Torx screw tightened using a T8 driver for reliable clamping. Is this head suitable for compact turret applications? Its 40 mm diameter and 40 mm length make it suitable for tight turret clearances while maintaining stiffness for shoulder work. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Corner Turning Head for XOMX 1204 Indexable Inserts With Internal Coolant, 90° - Teknik Makina
Combining a compact 40 mm diameter and integrated internal coolant with a rigid 90° cutting geometry, this corner milling head delivers stable square‑shoulder machining and efficient chip control; order via Metav Werkzeuge or consult our advisors for application advice. Corner milling head T510-1TM — 40 mm, internal coolant, for XOMX 1204 indexable inserts (Teknik Makina) Corner milling head T510-1TM for precision shoulder and face work, compatible with XOMX 1204 indexable inserts and equipped with internal coolant for improved tool life. 40 mm diameter for compact machining Internal coolant for improved tool life 90° cutting angle for square shoulder cuts Four cutting edges for economical index changes Compatible with XOMX 1204 inserts (SECO) Stable machining with predictable results The compact 40 mm diameter head is engineered to reduce overhang and increase rigidity, which leads to stable cutting conditions and repeatable results. The 90° cutting angle is established for true square‑shoulder operations and helps to simplify setup and downstream inspection. Because the design concentrates mass close to the spindle, vibration is minimised and surface finish consistency is improved, making the tool head a reliable choice for medium‑duty external machining where dimensional accuracy matters. Cooling integration that extends tool life Integrated internal coolant supplies cutting fluid directly to the cutting zone, supporting efficient chip evacuation and heat control. This targeted coolant flow reduces thermal loading on both the insert and the holder, which in turn lengthens insert life and maintains cutting edge geometry for longer intervals. The coolant channel is implemented without compromising the holder’s rigidity, so machining performance is preserved while maintenance intervals are extended, lowering total operating costs per component. Economical indexability and fast clamping Equipped with four cutting edges, the head allows multiple index changes before replacement, improving cost efficiency during batch production. Fast clamping is achieved with the supplied Torx screw specification M3.5x8.5 and T10 Torx key, which ensures quick, repeatable insert retention and minimal downtime during tool change. The mechanical fixation and geometric alignment have been optimised to keep runout low, so concentricity and part tolerances remain within tight limits for serial machining. Compatibility and workshop integration The head is designed for use with XOMX 1204 indexable inserts and is documented as compatible with SECO insert types, which simplifies tool sourcing and grade selection. With an overall length of 40 mm and a mass of 0.25 kg, the holder suits compact toolholders and reduced‑overhang setups. Where material selection or insert grade needs clarification, the tool head’s compatibility with widely available insert families supports flexible process planning and fast integration into existing tooling systems. Contact Metav Werkzeuge today to discuss Teknik Makina’s T510-1TM corner milling head, request application recommendations or arrange a technical consultation via info@metav-werkzeuge.com or +49 2822 7131930. Technical data SKU: T510-1TM Manufacturer: Teknik Makina ECLASS: 21181015 Label: 40mm Eckmesserkopf XOMX 1204 L40mm mit Innenkühlung Core data Diameter: 40 mm Overall length: 40 mm Weight: 0.25 kg Cutting angle: 90° Number of cutting edges: 4 Torx screw: M3.5x8.5 Torx key: T10 Special features Internal coolant For XOMX 1204 indexable inserts Compatible with SECO insert types FAQ Which inserts fit this head? The corner milling head accepts XOMX 1204 indexable inserts; Teknik Makina’s T510-1TM is specified for this insert family and is compatible with SECO‑type grades to match material and finish requirements. Is internal coolant delivered with the holder? Yes, the holder features internal coolant channels integrated into the body to feed fluid directly to the cutting zone for improved chip control and tool life. What fastening hardware is required for insert clamping? Insert clamping uses a Torx screw M3.5x8.5 tightened with a T10 Torx key, which provides secure, repeatable retention for the indexable inserts in the T510-1TM. Can this head achieve true square shoulders? The 90° cutting angle and compact 40 mm design are intended for square‑shoulder and face operations; the geometry supports accurate right‑angled features when combined with appropriate setup and inserts. Which holder length and overhang conditions are recommended? With an overall length of 40 mm and reduced mass, the head is suited to short overhang applications where rigidity and minimised runout are priorities; consult Metav Werkzeuge for specific holder compatibility. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Corner Turning Holder 90° For APMT 11T3 Indexable Inserts, M2.5x5.5 Torx Screw - Teknik Makina
Take advantage of a compact, rigid tool head that combines a 90° cutting angle with compatibility for standard APMT 11T3 indexable inserts to produce accurate perpendicular faces and reduced setup time — order directly via Metav Werkzeuge or consult our tooling advisers for integration into existing toolholders. Corner milling head T250TM – 90° head for APMT 11T3 inserts (Teknik Makina) The Corner milling head designed for precise 90° shoulder machining and reliable fit with standard APMT 11T3 indexable inserts, suitable for general CNC milling and finishing of perpendicular faces. Corner milling head for APMT 11T3 inserts 90° cutting angle for square shoulders 16 mm shank for secure toolholder fit Secured with M2.5x5.5 Torx screw Accurate right‑angle faces with indexable inserts The compact head provides a 90° cutting angle that ensures true square shoulders and consistent contact geometry on machined parts. Matched to the APMT 11T3 insert form, the head allows rapid replacement of cutting edges while keeping clamping repeatability high. For production environments where setup time and workpiece tolerances matter, this configuration reduces manual dressing and aligns with standard indexable tooling workflows to maintain throughput and part conformity. Rigid design for stable machining and extended tool life A firm connection via the 16 mm shank and a compact envelope of Ø 40 mm with an overall length of 40 mm gives the head the stiffness required for short‑overhang operations. The low mass (approx. 0.22 kg) helps reduce centrifugal effects and vibration at higher spindle speeds, resulting in improved surface finish and longer insert life. The construction supports repeatable runs on CNC lathes and milling centres where stability and micrometre‑level consistency translate directly into lower rework rates. Straightforward clamping and quick servicing Insert retention is provided by a M2.5x5.5 Torx screw, tightened with a T8 key, so insert changes are fast and tool maintenance is uncomplicated. The head is compatible with Korloy inserts in the APMT 11T3 format and can be stocked as a single, reliable component to reduce tooling inventory complexity. Supplied as a compact, ready‑to‑mount head, the unit is designed to integrate smoothly into existing toolholder systems and to minimise downtime during changeovers. For precise 90° shoulder machining with proven compatibility, request the T250TM corner milling head from Metav Werkzeuge — call +49 2822 7131930 or eMail info@metav-werkzeuge.com to discuss toolholder integration and delivery from our European stock. Technical data Article number: T250TM Manufacturer: Teknik Makina SKU: T250TM Product type: Corner milling head Facts Diameter: 40 mm Overall length: 40 mm Shank diameter (take‑up): 16 mm Weight: 0.22 kg Cutting angle: 90° Cutting edges: 5 Special features For APMT 11T3 indexable inserts Compatible with Korloy APMT 11T3 inserts Torx screw M2.5x5.5 Torx key size T8 SKU reference: T250TM FAQ What inserts fit this head? The T250TM corner milling head accepts APMT 11T3 format indexable inserts; Korloy inserts with that geometry are compatible. Which screw and key secure the insert? The insert is secured with an M2.5x5.5 Torx screw, tightened using a T8 key; the specification ensures reliable clamping of the insert seat. Is the head suitable for finishing square shoulders? Yes, the 90° geometry of the head is intended for producing true right‑angle faces and is suitable for finishing operations where perpendicularity is critical. What are the critical dimensions for toolholder selection? Key dimensions: shank take‑up 16 mm, envelope Ø 40 mm, overall length 40 mm; these determine compatibility with standard toolholders. Which SKU and brand should be referenced when ordering? Order under SKU T250TM from Teknik Makina; referencing the SKU ensures the correct corner milling head is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Corner Turning Tool Head 90° For APKT 1604 Indexable Inserts, M4x10 Torx - Teknik Makina
Take advantage of the 90° cutting geometry, secure APKT 1604 insert compatibility and a compact 16 mm shank for stable mounting; the result is consistent shoulder finishes, reduced vibration and reliable cycle times — order directly via Metav Werkzeuge or consult our specialists for integration advice. Corner Tool Head T180TM — 90° holder for APKT 1604 indexable inserts (Teknik Makina) The Corner Tool Head T180TM is a 90° right‑angle toolholder designed for precise shoulder turning and facing using APKT 1604 indexable inserts. 90° cutting angle for shoulder turning Compatible with APKT 1604 Korloy inserts 16 mm shank for secure toolholder mounting 40 mm head diameter, three cutting edges Accurate shoulder turning with repeatable geometry The right‑angle head delivers a 90° cutting angle that is engineered to produce consistent shoulder faces and axial transitions. With the ability to accept APKT 1604 inserts, the holder provides a predictable cutting edge position that reduces set‑up time and minimises rework. The toolholder’s geometry supports stable chip formation and predictable tool engagement, which together contribute to improved process reliability on turning centres and live‑tool applications. Stable mounting and straightforward insert retention Designed with a 16 mm shank, the holder ensures secure clamping in standard toolposts and turret adaptors, reducing the risk of chatter during interrupted cuts. Insert retention is achieved with a Torx M4x10 screw and requires a T15 key for removal and indexing, allowing rapid changeover of inserts when wear occurs. The compact head — 40 mm diameter with an overall length of 45 mm — keeps overhang minimal, improving rigidity and tool life while the nominal mass (0.267 kg) helps to dampen vibration in short‑overhang setups. Suited to steelworking and productivity improvement Matched with Korloy APKT inserts, this right‑angle head is positioned for general steel machining tasks where precise shoulders and small stepovers are required. The three cutting edges on the head support reliable cutting engagement and even wear distribution, extending the useful life of both insert and holder. In production contexts, the combination of robust mounting and standardised insert format enables faster tool changes and steady cycle times, translating into measurable productivity gains on multi‑batch turning operations. For enquiries about integrating the Teknik Makina corner head into workshop tooling systems or to secure supply from Metav Werkzeuge’s Emmerich quality hub, contact Metav Werkzeuge for personalised advice and immediate processing. Technical data Article number: T180TM Brand: Teknik Makina Description: 90° corner tool head for APKT 1604 indexable inserts Compatible inserts: APKT 1604 Compatible insert manufacturer: Korloy Core specifications Shank diameter: 16 mm Head diameter: 40 mm Overall length: 45 mm Weight: 0.267 kg Cutting angle: 90° Number of cutting edges: 3 Special features Torx screw: M4x10 Torx key size: T15 Intended application: shoulder turning / facing ECLASS: 21181015 FAQ Which insert type fits this holder? The holder accepts APKT 1604 indexable inserts; it is specified for this insert format and is compatible with Korloy APKT 1604 grades. What shank size is required for mounting? A 16 mm shank connection is required for clamping in standard toolposts or turret adaptors. Which screw and key are used for insert clamping? Insert retention uses a Torx M4x10 screw; a T15 Torx key is required for tightening and removal. Is this head suitable for heavy‑duty roughing? The right‑angle head is optimised for shoulder turning and facing with short overhangs; suitability for heavy‑duty roughing depends on machine rigidity and cutting parameters. What are the key dimensional limits to consider for setup? Important dimensions are the 40 mm head diameter and 45 mm overall length; these define clearance and overhang for toolstation planning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Eckmesserkopf für Walter ADMT 1606 Wendeplatten - Teknik Makina
Highlights Eckmesserkopf passend für ADMT 1606 Wendeplatten des Herstellers Walter Schnittwinkel 90° Durchmesser: 40mm 40mm Eckmesserkopf von Teknik Makina für alle ISO Schneidplatten ADMT 1606. Neben den Standard ISO Wendeschneidplatten ist das Werkzeug geeignet für Walter Schneidplatten ADMT 1606. Alle Wendeplatten von Walter können Sie auch bei uns direkt beziehen. Einfach per Mail anfragen, oder rufen Sie uns an. Passende Schneidplatten gibt es hier zu entdecken. Eckmesserköpfe sind ideal zur Verbesserung Ihrer Schneidleistung bei optimaler Zerspanung, selbst auf kleineren Maschinen. Sie eignen sich für zwei Anwendungen. Zum einen sind sie hervorragend für das Fräsen von Flächen nutzbar. Zum anderen kann der Eckmesserkopf auch für das Formfräsen genutzt werden. Dank der exakten Verarbeitung ist ein perfekter Sitz der Platte gewährleistet, sodass ein Verrutschen unmöglich ist. Die Wendeplatten sind fest mit dem Eckmesserkopf verschraubt. Die Schrauben lassen sich mühelos entfernen. Dadurch ist ein schneller Austausch der Schneidplatten möglich, um den Bearbeitungsprozess rasch fortzusetzen. Der Schnittwinkel von 90° sorgt dafür das Sie präzise Oberflächen herstellen können. Beim Eckfräsen werden simultan zwei Flächen bearbeitet. Dieser Zerspanprozess kombiniert Umfangs- und Planfräsen. Eine der wesentlichen Anforderungen ist die Herstellung einer Schulter mit einem echten 90°-Winkel. Herkömmliche Eckfräser sowie Schaft-, Walzenstirn- und Scheibenfräser können für diesen Prozess verwendet werden. Hier finden Sie den kompletten Katalog von Teknik Makina als PDF zum Download. Produktdetails: Bezeichnung: Eckmesserkopf Hersteller: Teknik Makina Bestellnummer: T351TM passend für ADMT 1606 Wendeplatten von Walter Durchmesser: 40mm Schnittwinkel 90° Gesamtlänge: 45mm Durchmesser Aufnahme: 16mm Schneiden: 4 Stück Artikelgewicht: 0,258kg Bestellen Sie jetzt Eckmesserkopf für ADMT 1606 Wendeschneidplatten. Das ist der Hersteller in einigen Worten: Teknik Makina, 1987 in der Türkei gegründet, nahm 1994 die Produktion von Schneidwerkzeugen auf. Im Jahr 2015 zog die Produktion in ein neues Werk im vierten Industriegebiet von Konya um, wo jetzt über 5.000 verschiedene Werkzeuge hergestellt werden. Mit 40 Produktionslinien, die in mehreren Kategorien gleichzeitig arbeiten können, ist das Unternehmen breit aufgestellt. Die Teams in Produktion und Design sind erstklassig ausgebildet und ISO 9001:2015 zertifiziert, um eine sichere und zuverlässige Prozessabwicklung zu garantieren. Angaben zur Produktsicherheit für das Werkzeug 40mm Eckmesserkopf für ADMT 1606 Schneidplatten mit der Artikelbezeichnung .T351TM Hersteller Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Verantwortliche Person Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com
40mm Eckmesserkopf für Walter ADMT 1606 Wendeplatten - Teknik Makina
Highlights Eckmesserkopf passend für ADMT 1606 Wendeplatten des Herstellers Walter Schnittwinkel 90° Durchmesser: 40mm 40mm Eckmesserkopf von Teknik Makina für alle ISO Schneidplatten ADMT 1606. Neben den Standard ISO Wendeschneidplatten ist das Werkzeug geeignet für Walter Schneidplatten ADMT 1606. Alle Wendeplatten von Walter können Sie auch bei uns direkt beziehen. Einfach per Mail anfragen, oder rufen Sie uns an. Passende Schneidplatten gibt es hier zu entdecken. Eckmesserköpfe sind ideal zur Verbesserung Ihrer Schneidleistung bei optimaler Zerspanung, selbst auf kleineren Maschinen. Sie eignen sich für zwei Anwendungen. Zum einen sind sie hervorragend für das Fräsen von Flächen nutzbar. Zum anderen kann der Eckmesserkopf auch für das Formfräsen genutzt werden. Dank der exakten Verarbeitung ist ein perfekter Sitz der Platte gewährleistet, sodass ein Verrutschen unmöglich ist. Die Wendeplatten sind fest mit dem Eckmesserkopf verschraubt. Die Schrauben lassen sich mühelos entfernen. Dadurch ist ein schneller Austausch der Schneidplatten möglich, um den Bearbeitungsprozess rasch fortzusetzen. Der Schnittwinkel von 90° sorgt dafür das Sie präzise Oberflächen herstellen können. Beim Eckfräsen werden simultan zwei Flächen bearbeitet. Dieser Zerspanprozess kombiniert Umfangs- und Planfräsen. Eine der wesentlichen Anforderungen ist die Herstellung einer Schulter mit einem echten 90°-Winkel. Herkömmliche Eckfräser sowie Schaft-, Walzenstirn- und Scheibenfräser können für diesen Prozess verwendet werden. Hier finden Sie den kompletten Katalog von Teknik Makina als PDF zum Download. Produktdetails: Bezeichnung: Eckmesserkopf Hersteller: Teknik Makina Bestellnummer: T351TM passend für ADMT 1606 Wendeplatten von Walter Durchmesser: 40mm Schnittwinkel 90° Gesamtlänge: 45mm Durchmesser Aufnahme: 16mm Schneiden: 4 Stück Artikelgewicht: 0,258kg Bestellen Sie jetzt Eckmesserkopf für ADMT 1606 Wendeschneidplatten. Das ist der Hersteller in einigen Worten: Teknik Makina, 1987 in der Türkei gegründet, nahm 1994 die Produktion von Schneidwerkzeugen auf. Im Jahr 2015 zog die Produktion in ein neues Werk im vierten Industriegebiet von Konya um, wo jetzt über 5.000 verschiedene Werkzeuge hergestellt werden. Mit 40 Produktionslinien, die in mehreren Kategorien gleichzeitig arbeiten können, ist das Unternehmen breit aufgestellt. Die Teams in Produktion und Design sind erstklassig ausgebildet und ISO 9001:2015 zertifiziert, um eine sichere und zuverlässige Prozessabwicklung zu garantieren. Angaben zur Produktsicherheit für das Werkzeug 40mm Eckmesserkopf für ADMT 1606 Schneidplatten mit der Artikelbezeichnung .T351TM Hersteller Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Verantwortliche Person Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com
40mm Face Grooving Head for LNMX 0603 Indexable Inserts, 6 Cutting Edges, T8 Torx Screw - Teknik Makina
Benefit from a compact, purpose-built face milling solution that pairs a 40 mm diameter cutter body with six cutting edges to deliver consistent material removal and stable surface finishes. The 16 mm arbor bore and standard Torx M3x7 fastening ensure rapid insert changes and repeatable clamping; order or request technical advice via Metav Werkzeuge for supply from Emmerich. Planmesserkopf (Face milling head) for LNMX 0603 indexable inserts — 40 mm, 6 cutting edges | Teknik Cutting Tools A face milling head (Planmesserkopf) engineered for efficient face milling with LNMX 0603 indexable inserts in light-to-medium duty applications 40 mm diameter for precise face milling Fits LNMX 0603 indexable inserts Fixed with M3x7 Torx screw and T8 key Six cutting edges for smooth material removal Predictable cutting performance for shorter cycle times The compact cutter body delivers a 40 mm diameter that concentrates cutting forces close to the tool centre, reducing deflection and enabling more predictable cycle times on short to medium overhangs. With six cutting edges, chip load per edge is lowered, which supports a smoother surface finish and extends tool life under comparable cutting parameters. This configuration is especially suited to repetitive facing operations where consistency and repeatability directly affect throughput. Rapid insert changes and reliable clamping reduce downtime A straightforward Torx fastening system—secured by an M3x7 screw and operated with a T8 key—permits quick insert replacement while maintaining stable clamping. The 16 mm arbor bore ensures a secure fit in common holders and minimises vibration when properly mounted. These mechanical features translate into reduced changeover times and lower setup overhead, helping workshops maintain steady production without complex fixture adjustments. Broad compatibility to simplify tooling logistics Designed for LNMX 0603 indexable inserts (insert designation KRLY) and compatible with Korloy inserts, the cutter head uses industry-standard insert geometry so replacement parts are readily available. The straightforward compatibility reduces inventory complexity and supports rapid recovery after wear or breakage. Combined with Metav Werkzeuge’s European supply logistics, this solution supports a dependable tooling strategy for trades and small-scale production environments. For verified compatibility and tailored advice on tooling setups, contact Metav Werkzeuge for prompt supply and technical support from Emmerich: +49 2822 7131930 or info@metav-werkzeuge.com Technical Data SKU: T836TM Item: face milling head (Planmesserkopf) Compatible inserts: LNMX 0603 Compatible insert manufacturer: Korloy Fixing screw: M3x7 Torx key: T8 Core specifications Diameter: 40 mm Overall height: 40 mm Shank / bore: 16 mm Cutting edges: 6 Design & compatibility Insert type: KRLY Fits LNMX 0603 indexable inserts Manufacturer: Teknik Makina SKU reference: T836TM FAQ How are the inserts secured in the face milling head? The face milling head (SKU T836TM) secures LNMX 0603 inserts with an M3x7 Torx screw; a T8 key is used for tightening to ensure repeatable clamping. What arbor or holder size is required for mounting? A 16 mm arbor bore is specified for this cutter body, so a 16 mm holder or adaptor is required for correct seating and stability. Which insert geometries and makers are supported? The cutter accepts LNMX 0603 indexable inserts, commonly available from Korloy; the insert designation for this head is KRLY. Is this head suitable for heavy roughing operations? This design is optimised for face milling and light-to-medium material removal where a 40 mm diameter and six cutting edges provide balanced performance; heavy roughing beyond these parameters should be assessed against machine rigidity and cutting conditions. Are replacement inserts and spare screws standard parts? Replacement LNMX 0603 inserts from Korloy and standard M3x7 Torx screws are widely available, simplifying maintenance and spare-part logistics for workshops using this head. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Face Mill Cutter for XNKU 06T3 Indexable Inserts with Internal Coolant, 90° - Teknik Makina
Benefit from a compact, high-precision solution that combines a 40 mm diameter, internal coolant and compatibility with XNKU 06T3 indexable inserts to speed up face milling with consistent surface quality; order directly via Metav Werkzeuge or consult our specialists for integration advice. Face milling head — for XNKU 06T3 indexable inserts, 40 mm with internal coolant (Teknik Makina) The Face milling head is a compact cutter head engineered for accurate face milling operations in production and workshop environments, compatible with XNKU 06T3 indexable inserts and designed to integrate with standard toolholders. 40 mm diameter for reliable face milling Internal coolant for efficient chip removal Compatible with XNKU 06T3 indexable inserts Overall length 40 mm, lightweight 0.224 kg High-performance compatibility for predictable machining results The milling head accepts XNKU 06T3 indexable inserts and is optimised for a 90° cutting angle, ensuring a true face finish and predictable material removal. With capacity for five cutting edges, the design minimises tool change frequency while maintaining process stability. The internal coolant channel directs lubricant to the cutting zone, reducing built-up edge and improving chip control; this leads to longer insert life and a more consistent surface finish across batch runs. Technical clarity is provided by measurable parameters such as 40 mm diameter, L40 mm overall length and a 16 mm shank, which support planning and fixture selection in CNC setups. Practical design that reduces downtime and simplifies maintenance The compact construction and modest mass (0.224 kg) favour rapid spindle acceleration and reduced load on the toolholder, while the use of Torx fastening (T8) and standard M2.5x7 screws supports quick serviceability. Replacement of indexable inserts is straightforward thanks to the standardised insert pocket geometry, which allows fast indexing and repeatable seating. The head’s configuration, supplied by Teknik Makina, is compatible with Palbit-specified inserts, enabling streamlined procurement and predictable stocking of spare parts. Clear mechanical connections and standardised fixing elements contribute to lower maintenance time and a cleaner process workflow. Application advantages and procurement confidence for workshops Suited to routine face milling tasks where consistency and uptime matter, the head offers a balance between compactness and capacity for multi-edge inserts. The controlled coolant delivery and robust clamping ensure reduced insert wear under typical production feeds and speeds, helping to lower overall machining costs per component. For procurement, the head is identified by SKU T683TM, making order management and inventory tracking straightforward. Integration into existing toolsets is simplified by the small overall length and the 16 mm mounting interface, supporting efficient tool changeovers and compact tool magazine layout. For reliable face milling with controlled coolant delivery, contact Metav Werkzeuge to discuss specification matching and availability of the Teknik Makina face milling head (SKU T683TM) via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T683TM Product type: Face milling head (Planmesserkopf) Designation: for XNKU 06T3 indexable inserts Facts Diameter: 40 mm Overall length: 40 mm Shank diameter: 16 mm Weight: 0.224 kg Number of cutting edges: 5 Cutting angle: 90° Special features Internal coolant: yes Compatible insert manufacturer: Palbit Fastening: Torx T8, screw M2.5x7 Manufacturer: Teknik Makina FAQ What inserts fit this milling head? The head is designed for XNKU 06T3 indexable inserts; Palbit inserts matching that designation are compatible. Is internal coolant integrated in the design? Yes, the milling head features internal coolant to direct coolant to the cutting zone for improved chip control. How many inserts or cutting edges does the head accommodate? The cutter head is configured for five cutting edges, which reduces indexing frequency during production. What is the shank size for mounting? The shank diameter is 16 mm, suitable for holders accepting that interface. Which fastening hardware is required for assembly? Assembly uses a Torx T8 key and M2.5x7 screws as supplied in the mounting design. How is the product identified for ordering? Order and inventory reference is SKU T683TM, which simplifies procurement and tracking. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Face Mill for Palbit LNXT 1306 inserts - Teknik Makina
Specifications: Order Number: T672TM Item: Face Mill usable with LNXT 1306 Indexable Inserts the Hersteller's Palbit Brand: Teknik Makina Quantitative Characteristics: Diameter: 40mm Cutting Edges: 4 Weight: 0.225kg Total length: 40mm Diameter Connection: 16mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
40mm Face Mill for RDMT 1204 Indexable Inserts With Internal Coolant, 4 Cuts - Teknik Makina
Benefit from coolant-assisted cutting and stable performance delivered by a compact 40 mm face mill; the internal coolant reduces heat and supports consistent chip evacuation while the four-edge configuration keeps cuts balanced. Order the round insert face mill directly via Metav Werkzeuge or ask our consultants if needed. Round insert face mill for RDMT 1204 indexable inserts — 40 mm, internal coolant (Teknik Makina) The Round insert face mill for RDMT 1204 indexable inserts is a compact, coolant-fed cutter designed for precise face milling operations where reliable chip control and quick insert changes are essential. Ø 40 mm diameter Internal coolant feed Compatible with RDMT 1204 inserts Four cutting edges for balanced cutting Coolant-assisted cutting for consistent cycle times The integrated internal coolant feed channels coolant directly to the cutting zone, which lowers cutting temperatures and supports longer tool life. By flushing chips away from the insert pockets the system improves chip evacuation, reducing the risk of recutting and helping to maintain surface finish tolerances in continuous production. With a compact Ø 40 mm body the cutter is particularly suited to tight setups and machines where controlled material removal and repeatability are priorities. Modular clamping and insert handling to reduce downtime Compatibility with RDMT 1204 indexable inserts ensures access to a broad range of grades and geometries for different materials. The tool secures inserts with a Torx clamping screw that matches a T15 key and uses M3.5x8.5 Torx screws, enabling quick, standardised insert changes and straightforward maintenance procedures. The four cutting edges arrangement balances forces during cutting, which reduces vibration and improves surface consistency — a direct benefit for batch production and finishing passes. Compact design and workshop-ready supply chain Weighing just 0.236 kg and with an overall length of 40 mm, this cutter occupies little spindle space while delivering the rigidity expected in industrial environments. The T139-1TM designation simplifies stock handling and reordering, and the robust build from Teknik Makina supports repeatable setup across multiple workstations. For procurement and integration, Metav offers reliable supply and product advice to help fit the cutter into existing tool programmes without disrupting throughput. For dependable coolant-fed face milling with RDMT 1204 inserts, contact Metav Werkzeuge to discuss the Teknik Makina T139-1TM and its application in the production environment; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 to arrange specification support or orders. Technical data SKU: T139-1TM Manufacturer: Teknik Makina Product type: Round insert face mill Label: 40mm Rundplattenfräser RDMT 1204 L40mm mit Innenkühlung UID: T139-1TM Dimensions & core figures Diameter: 40 mm Overall length: 40 mm Weight: 0.236 kg Number of cutting edges: 4 eCl@ss: 21180902 Features & compatibility Compatible with RDMT 1204 indexable inserts Internal coolant feed Torx key: T15 Torx screw: M3.5x8.5 FAQ What inserts does this cutter accept? The round insert face mill accepts RDMT 1204 indexable inserts; the configuration is optimised for those round insert geometries to provide secure seating and efficient cutting. How does the internal coolant benefit machining? Internal coolant in the cutter directs fluid to the cutting edge to reduce temperature, support chip evacuation and contribute to extended insert life for the T139-1TM tool. Which Torx key is required for insert changes? Insert clamping uses a Torx interface compatible with a T15 key and Torx screws sized M3.5x8.5 to ensure standardised, secure tightening. Is this cutter suitable for compact machine tools? Yes; the compact Ø 40 mm diameter and 40 mm overall length make it suitable for limited spindle clearance while maintaining the rigidity needed for stable cuts. How does the four-edge design affect surface finish? The four cutting edges distribute cutting forces evenly, reducing vibration and supporting consistent surface quality across repeated passes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Face Mill For RDMT 12T3 Indexable Inserts, 3 Cutting Edges, M3.5 Clamp Screw - Teknik Makina
Take advantage of a compact, high-performance milling solution that combines precise cutting geometry with easy maintenance: the 40 mm diameter design with three cutting edges ensures efficient material removal while the 16 mm shank provides secure mounting for stable machining. Order the tool directly via Metav Werkzeuge or consult the team for application advice. Round Insert Milling Cutter – 40 mm, for RDMT 12T3 indexable inserts by Teknik Makina The Round Insert Milling Cutter is a compact face milling tool designed for light to medium milling operations using RDMT 12T3 indexable inserts, ideal for workshop and small-batch production where rapid tool changes and consistent chip control are required. Ø 40 mm cutting diameter Three cutting edges for efficient removal Fits RDMT 12T3 indexable inserts 16 mm shank for secure mounting High removal rate with compact geometry The compact cutter achieves a strong balance between size and performance by combining a 40 mm diameter and three cutting edges, which increases the metal removal rate without demanding excessive spindle power. Using indexable inserts such as RDMT 12T3 allows multiple cutting edges per insert; when one edge is worn, the insert can be rotated to present a fresh edge, reducing tool costs and changeover time. This design suits production environments that prioritise cycle-time reduction and predictable throughput. Secure clamping and straightforward serviceability A practical clamping concept simplifies maintenance: the head is secured with a locking screw M3.5 and a Torx screw M3.5x8.5, operated with a T15 Torx key, enabling repeatable torque and safe insert retention. Torx drive engagement minimises cam-out and helps maintain consistent clamping force, which in turn supports stable cutting conditions and longer tool life. Simple, reliable fastenings mean less downtime during insert changes and faster setup for repetitive jobs. Versatile fit for varied machine set-ups With a 16 mm shank and a compact overall length of 40 mm, the cutter is suitable for operations where tool overhang must be kept to a minimum. The lightweight construction (approx. 0.235 kg) reduces centrifugal loads at higher speeds and helps maintain balance in high-rev applications on small milling spindles. Although compact, the tool is engineered for repeatable accuracy in small-batch or job-shop environments and integrates easily into standard toolholders and automated change systems. Discuss application-specific parameters with Metav Werkzeuge to confirm compatibility and optimise machining parameters for Teknik Cutting Tools' T280TM round insert milling cutter; Metav supplies from Emmerich with expert advice and reliable delivery. Technical Data Article number: T280TM Brand: Teknik Makina Model designation: Round insert milling cutter for RDMT 12T3 indexable inserts eClass / ETIM: 21180902 / EC011860 Data Diameter: 40 mm Cutting edges: 3 Overall length: 40 mm Shank diameter: 16 mm Weight: 0.235 kg Special features For RDMT 12T3 indexable inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key size: T15 SKU: T280TM FAQ What inserts are compatible with this cutter? The cutter is designed to accept RDMT 12T3 indexable inserts; using the specified insert form ensures the correct seating and chip control for this tool. How is the insert secured in the cutter? Inserts are clamped with a locking screw M3.5 and retained by the Torx fastener M3.5x8.5, tightened using a T15 key to achieve secure and repeatable retention for the T280TM. Can this cutter be used on small machine spindles? Yes, the combination of a 16 mm shank and compact overall length 40 mm makes the T280TM suitable for machines with limited tool overhang and smaller spindle capacities. How many cutting edges does the tool provide before insert rotation is required? The cutter is built for three cutting edges per revolution; each RDMT 12T3 insert offers multiple usable edges, which can be indexed to extend service life. Is the T280TM available with replacement screws or spare keys? Replacement fasteners compatible with the T280TM are standard Torx types; ensure use of the specified M3.5x8.5 Torx screw and T15 key to maintain clamping reliability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Face Mill For RPMW 10T3 Indexable Inserts, 5 Teeth, 16mm Shank - Teknik Makina
Compact milling performance with Ø40 mm diameter, five cutting edges and a 16 mm shank for secure mounting; delivers efficient material removal and reduced changeover time. Order the Round insert milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Round insert milling cutter T706TM — for RPMW 10T3 indexable inserts, Ø40 mm (Teknik Makina) A versatile Round insert milling cutter T706TM intended for light facing and shoulder milling operations with RPMW 10T3 indexable inserts, designed for compact toolholders and short overhangs. Ø40 mm cutting diameter Compatible with RPMW 10T3 inserts 16 mm shank for compact toolholders Five cutting edges for efficient material removal Performance that keeps production moving The cutter is engineered to increase throughput by combining a compact geometry with five cutting edges that distribute cutting forces and extend tool life. With a Ø40 mm cutting diameter the tool achieves high material removal rates in interrupted and continuous cuts alike, reducing cycle time on small-to-medium batch runs. The design helps maintain consistent chip evacuation, which contributes to cleaner surfaces and less rework over extended production periods. Compatibility that reduces setup time Compatibility with RPMW 10T3 inserts from Korloy makes the tool easy to integrate into existing tooling systems; standardised insert sizes simplify stock management and replacement. Insert clamping uses a Torx screw (M3.5x8.5) operated with a Torx T15 key for straightforward, repeatable retention. The standardized fixing speeds insert changes and lowers fixture downtime, supporting predictable production planning and faster tool change routines. Compact design for confined toolholders A 16 mm shank and a 40 mm overall height make the head suitable for machines with restricted clearance, enabling closer approach to fixtures and fewer collisions on complex parts. The compact footprint optimises tool stiffness when mounted in short overhang, improving dimensional control and surface finish. This arrangement is particularly beneficial in small machining centres and turning/milling hybrids where space and rigidity are both at a premium. Practical applications and operator advantages Designed primarily for general-purpose milling tasks, the cutter is well suited to shoulder milling, light face milling and finishing passes where indexable inserts provide repeatable edge geometry. Use of indexable inserts reduces downtime since worn edges can be rotated or replaced quickly, yielding reduced downtime and stable process quality. The simple Torx clamping system also supports consistent torque application, which helps maintain cutting performance and repeatability across shifts. For technical advice, stock checks or an application review of the Teknik Cutting Tools T706TM, request a supply check or application consultation from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T706TM Manufacturer: Teknik Makina Compatible inserts: RPMW 10T3 (Korloy) Shank diameter: 16 mm Cutting diameter: 40 mm Total height: 40 mm Cutting edges: 5 Clamping screw: M3.5x8.5 Torx key size: T15 Facts Diameter: 40 mm Total height: 40 mm Shank diameter: 16 mm Cutting edges: 5 Screw: M3.5x8.5 Special features Suitable for RPMW 10T3 indexable inserts Compatible with Korloy inserts Torx clamping system Compact design for confined toolholders SKU: T706TM FAQ What insert type fits this cutter? The cutter accepts RPMW 10T3 indexable inserts; it is specified for those insert dimensions and is compatible with Korloy RPMW 10T3 grades. How is an insert secured in the cutter? Inserts are clamped with a screw (M3.5x8.5) that is tightened using a Torx T15 key, providing consistent and repeatable clamping for the T706TM. Which machines benefit most from this cutter? The compact geometry and 16 mm shank make the tool particularly suitable for small machining centres and applications with limited clearance where stiffness and short overhangs are required. Does the tool support quick changeover on production lines? Yes, the use of standard RPMW 10T3 indexable inserts and a Torx clamping system reduces changeover time and simplifies insert stock management for continuous production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Face Mill Head L40mm With Internal Coolant For WNMX 09T3 Indexable Inserts, 4 Teeth - Teknik Makina
Taking advantage of the 40 mm diameter, internal coolant and compatibility with WNMX 09T3 indexable inserts delivers a compact, high-efficiency solution for face milling operations; order via Metav Werkzeuge or consult their technical team for application support. Face milling head for WNMX 09T3 indexable inserts — 40 mm, internal coolant (Teknik Makina) Face milling head designed for efficient face milling with WNMX 09T3 indexable inserts in general workshop and industrial applications 40 mm diameter for compact machining Internal coolant for improved tool life Four cutting edges for smooth surface finish Compatible with Korloy WNMX 09T3 inserts Consistent machining performance for repetitive tasks This cutter head offers a reliable balance between rigidity and accessibility. The 40 mm diameter and lightweight construction deliver steady engagement at typical spindle speeds, reducing vibration during face milling. Designed for WNMX 09T3 indexable inserts, the unit supports repeatable results on cast iron, steel and non-ferrous materials when paired with the appropriate insert grades. The presence of four cutting edges also spreads cutting forces evenly, which helps preserve spindle bearings and maintain consistent cycle times. Built-in coolant and robust fastening for longer tool life Integrated internal coolant channels provide directed lubrication and chip evacuation at the cutting zone, lowering thermal load on the inserts and minimising built-up edge. The secure clamping system with M3x7 Torx screws (Torx key T8) simplifies insert changes while ensuring repeatable seating. These characteristics combine to reduce downtime and extend insert life, translating into measurable improvements in process economy and fewer tool changes per production shift. Workshop-ready design for straightforward integration The head’s compact overall length and compatibility with Korloy WNMX 09T3 inserts make it straightforward to adopt in existing tool setups. The lightweight construction eases handling during tool preparation and the standardised screw fixation supports quick maintenance routines. For operations aiming to centralise suppliers, the component fits neatly into broader tooling strategies, enabling a smooth transition to higher productivity without complex retrofitting. Discuss specific application requirements with Metav Werkzeuge to match this Teknik Makina face milling head to production needs — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T669-1TM Label: 40mm face milling head WNMX 09T3 L40mm with internal coolant ECLASS: 21181015 Facts Diameter: 40 mm Overall length: 40 mm Weight: 0.213 kg Cutting edges: 4 Special features Internal coolant Compatible with WNMX 09T3 indexable inserts (Korloy) Torx screw M3x7, Torx key T8 Manufacturer: Teknik Makina FAQ What inserts fit this milling head? The milling head is compatible with WNMX 09T3 indexable inserts; Korloy grades are specified for straightforward matches. Does the head provide coolant to the insert tip? Yes, internal coolant channels supply lubrication directly to the cutting zone to aid chip evacuation and reduce thermal load. How many cutting edges are active on this head? The component is configured with four cutting edges, which helps distribute cutting forces and produce a smoother surface finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Face Milling Cutter for RDMT 1003 Indexable Inserts With Internal Cooling, 4 Teeth - Teknik Makina
Compact 40 mm diameter and internal coolant combine to provide stable cutting and extended insert life; compatibility with RDMT 1003 indexable inserts simplifies maintenance and logistics. Order the round face mill directly via Metav Werkzeuge or ask our consultants if needed. Round face mill for RDMT 1003 – 40 mm with internal coolant (Teknik Makina) The Round face mill for RDMT 1003 indexable inserts is a compact milling head engineered for precise face milling in confined setups, offering internal coolant for improved tool life and consistent surface finish. Compact 40 mm diameter for tight spaces Integrated internal coolant for chip evacuation Compatible with RDMT 1003 indexable inserts Four cutting edges for stable material removal Precision and productive cutting for small setups The compact design delivers high repeatability in confined workstations. With a 40 mm diameter and a total length of 40 mm, the cutter is suited to applications where space and tool overhang are limited. The use of standard RDMT 1003 indexable inserts keeps tooling cost predictable and streamlines inventory. A reduced overhang and balanced geometry help to lower vibration, which translates into a more consistent surface finish and longer insert life—advantages that matter when cycle times and part quality are measured precisely. Internal coolant to protect inserts and improve cycle stability Built-in internal coolant directs cutting fluid precisely to the cutting zone, enhancing heat management and chip evacuation. This targeted supply reduces thermal load on the insert edges and slows wear, which reduces tooling changes and supports continuous production. In practical terms, the internal coolant contributes to steady cutting conditions and fewer rework events, providing a clear efficiency gain for shop floors focused on throughput and part quality. Robust fastening and service-friendly assembly Maintenance and insert changes are straightforward thanks to the Torx fastening system: a T15 Torx key secures the insert with M3.5x8.5 screws. The fast, standardised clamp method reduces downtime during service intervals and is compatible with widely available maintenance tools. The assembly's low mass (0.22 kg) and well-defined mounting interface also simplify handling and reduce wear on toolholding systems during frequent tool changes. Versatile milling head for predictable results The four cutting edges enable even material removal and stable milling performance across a variety of tasks that require a compact cutter head. The 16 mm mounting bore ensures a solid connection to the arbor or toolholder, maintaining concentricity and minimising run-out. Together, these attributes support repeatable results and predictable tool life, which are essential for production planning and process control in industrial machining environments. Choose Teknik Makina’s compact face mill with internal coolant for reliable, space-saving face milling—contact Metav Werkzeuge in Emmerich for tailored advice and dependable supply. Technical data SKU: T289-1TM Manufacturer: Teknik Makina Product type: Round face mill Facts Diameter: 40 mm Overall length: 40 mm Mounting bore: 16 mm Weight: 0.22 kg Cutting edges: 4 Fastening screw: M3.5x8.5 Torx key: T15 Special features Compatible with RDMT 1003 indexable inserts Internal coolant Indexable-insert face milling head SKU T289-1TM FAQ Which inserts fit this cutter? The cutter is compatible with RDMT 1003 indexable inserts; using this standard keeps insert logistics simple and cost-effective. Does the milling head have internal coolant? Yes, the tool features internal coolant that directs fluid to the cutting zone to help control temperature and chip evacuation. What are the key dimensions of the milling head? The milling head has a diameter of 40 mm, an overall length of 40 mm, and a 16 mm mounting bore. Which fastening hardware is used for the inserts? Inserts are secured with M3.5x8.5 screws operated with a T15 Torx key for quick and reliable clamping. Who manufactures the tool and what is the SKU? The tool is manufactured by Teknik Makina and sold under SKU T289-1TM for straightforward ordering and tracking. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Face Milling Cutter For RDMT 12T3 Indexable Inserts L40mm With Internal Coolant - Teknik Makina
Benefit from a compact 40 mm design combined with internal coolant and compatibility with RDMT 12T3 indexable inserts to secure stable, high-performance face milling. Order the cutter through Metav Werkzeuge for reliable supply or contact our advisers for application guidance. Round insert cutter T281-1TM — 40 mm diameter, internal coolant (Teknik Makina) A Round insert cutter for RDMT 12T3 indexable inserts, engineered for compact face milling and efficient material removal in confined setups. 40 mm diameter for compact milling Internal coolant supply Compatible with RDMT 12T3 inserts Four cutting edges for efficient removal Compact cutter geometry for controlled, consistent machining The compact 40 mm diameter and streamlined body deliver a balanced combination of rigidity and accessibility for face milling in restricted spaces. With four cutting edges arranged for evenly distributed cutting forces, the head reduces vibration and supports consistent surface finish during interrupted and continuous cuts. This geometry is particularly beneficial when fixture space is limited, where a larger tool would compromise stability or prevent access. Internal coolant for improved tool life and process reliability Integrated internal coolant channels supply cutting fluid close to the cutting zone, reducing heat generation and aiding chip evacuation. Better cooling lowers thermal load on the insert, which translates into extended tool life and more reliable edge retention. For workshops aiming to reduce downtime, this targeted coolant approach helps maintain dimensional accuracy and surface quality over longer tool cycles. Secure clamping and fast indexable-insert changes Insert retention uses a Torx screw specification ( M3.5x8.5 ) tightened with a T15 key, providing secure clamping with reproducible seating force. The indexable design of RDMT 12T3 inserts enables rapid corner changes without reclamping the whole head, cutting maintenance time and simplifying tool logistics. The light overall mass (0.236 kg) further eases handling when preparing toolsets, reducing changeover effort at the machine. Efficient face milling across general applications Designed as a face milling head, the cutter supports versatile machining tasks where compact form factor and coolant supply are priorities. The pairing with RDMT 12T3 indexable inserts allows selection of insert grades suited to particular materials or cutting conditions, making the head a flexible choice for batch production and mixed-operation workshops. Operational stability and straightforward insert replacement help to uphold productivity and part quality in day-to-day production. Discuss suitability with Metav Werkzeuge in Emmerich — the Teknik Makina round insert cutter with internal coolant (SKU T281-1TM) can be specified and delivered directly; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical data Article number: T281-1TM Product type: Round insert cutter Brand: Teknik Makina ECLASS: 21180902 Indexable insert: RDMT 12T3 Facts Diameter: 40 mm Total length: 40 mm Weight: 0.236 kg Cutting edges: 4 Special features Internal coolant supply Torx screw: M3.5x8.5 Torx key: T15 Category: Face milling head (Planmesserkopf) FAQ What insert type is required for this cutter? The cutter accepts RDMT 12T3 indexable inserts; the TekniK Makina round insert cutter T281-1TM is designed specifically for that insert geometry. Does the cutter provide coolant to the cutting zone? Yes, the T281-1TM features internal coolant channels that deliver fluid directly to the insert rake zone to aid cooling and chip evacuation. Which toolholder or application suits this head best? The head is intended as a compact face milling solution; it is suitable where access is limited and coolant-fed machining is required, with the cutter working as a face milling head in general milling setups. How are the inserts secured and changed? Inserts are clamped with a Torx screw ( M3.5x8.5 ) tightened with a T15 key, allowing quick, repeatable index changes without complex procedures. Is the cutter appropriate for rapid changeover in production? Yes, the indexable insert system and secure Torx clamping enable fast insert replacement, supporting efficient tool changeovers and minimised machine downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Face Milling Cutter Head for BLMP 0603 Indexable Inserts with Internal Coolant, 45mm Length - Teknik Makina
Take advantage of a compact face milling solution that combines a 40 mm cutting diameter, internal coolant and six cutting edges for consistent component finishes and reduced changeover time. The compact design and secure Torx fastening mean reliable mounting and fast insert changes — order or request tailored advice through Metav Werkzeuge for swift supply and application support. Face milling head T480-2TM – 40 mm, internal coolant, for BLMP 0603 indexable inserts (Teknik Makina) A face milling head T480-2TM engineered for accurate face machining with BLMP 0603 indexable inserts, optimised for compact toolholders and industrial milling applications. 40 mm diameter for compact face milling Internal coolant for improved tool life Compatible with BLMP 0603 indexable inserts Six cutting edges for efficient material removal High-efficiency face machining for compact setups The compact 40 mm diameter of this face milling head delivers a balance between accessibility and material removal capability, making it suitable for tight fixtures and multi-spindle arrangements. With six cutting edges, fewer tool changes are required, which reduces non-productive time and supports continuous production. The 100° cutting angle is designed to control cutting forces and promote even surface contact, meaning a consistent finish across the workpiece without compromising cycle time. Prolonged insert life through targeted coolant supply The integrated internal coolant channel directs lubricant and coolant close to the cutting zone, which helps manage temperature at the cutting edge and supports chip control. This focused cooling reduces thermal stress on inserts and can extend service intervals, improving overall process stability. For operations where coolant supply is part of the machining strategy, the head’s internal channel supports reliable coolant delivery without additional external adapters. Straightforward compatibility and quick serviceability Designed for use with BLMP 0603 indexable inserts and compatible with Taegutec tooling, the milling head simplifies procurement and tool preparation. Fast replacement of inserts is facilitated by the standard T8 Torx interface and M3x6.2 fixing screws, enabling rapid clamping and secure seating. The straightforward fastening system reduces changeover complexity and helps maintain consistent clamp torque, supporting repeatable machining results. Ready for industrial integration and compact tool assemblies With an overall length of 45 mm and a mass of 0.262 kg, this milling head suits compact tool assemblies where weight and reach affect spindle dynamics. The robust design from Teknik Makina matches industrial demands for repeatability and straightforward maintenance procedures. Where process reliability and simple stocking are priorities, the component’s form factor supports efficient storage and handling within a central toolroom or production cell. Contact Metav Werkzeuge for application-specific recommendations and to secure supply of the Teknik Makina face milling head with internal coolant — enquiries are handled directly from our Emmerich location for fast and transparent fulfilment. Technical data Article number: T480-2TM Designation: Face milling head for BLMP 0603 indexable inserts Manufacturer: Teknik Makina Dimensions & weight Diameter: 40 mm Overall length: 45 mm Weight: 0.262 kg Number of cutting edges: 6 Cutting angle: 100° Features & compatibility Internal coolant: yes Compatible with Taegutec BLMP 0603 indexable inserts Torx key: T8 Torx Fixing screw: M3x6.2 FAQ Which inserts fit this milling head? The head accepts BLMP 0603 indexable inserts and is specified for compatibility with Taegutec inserts for matching insert geometries. Does the tool provide internal coolant? Yes, the face milling head includes an internal coolant channel to supply lubricant directly to the cutting zone. How many cutting edges are available before insert change? The milling head is set up with six cutting edges, which extends effective cutting intervals compared with fewer-edge configurations. What are the key dimensions and mass of the head? The component has a diameter of 40 mm, overall length of 45 mm and a weight of approximately 0.262 kg. Which fastening and screw sizes are required for insert clamping? Insert clamping uses a T8 Torx interface with M3x6.2 screws for secure and repeatable fixing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Face Milling Cutter Head For SDMT 09T3 Indexable Inserts, 4 Cutting Edges, Ø16mm Shank - Teknik Makina
Take advantage of a compact, high-performance tool that combines a 40 mm diameter, four cutting edges and compatibility with SDMT 09T3 indexable inserts for reliable face milling results; order the face milling head directly via Metav Werkzeuge or ask the consultants if additional technical detail is required. Face milling head T362TM by Teknik Makina — compact 40 mm head for SDMT 09T3 indexable inserts Face milling head T362TM for SDMT 09T3 indexable inserts, designed for accurate facing and light to medium material removal in workshop and production settings 40 mm diameter for compact milling Four cutting edges for efficient removal 16 mm shank for secure toolholder fit Compatible with ZCC SDMT 09T3 inserts Improved productivity from compact tool geometry The compact design delivers a 40 mm diameter footprint while retaining robust cutting performance through four cutting edges. This geometry reduces tool overhang and improves stability in shoulder and face milling operations, which in turn reduces vibration and helps maintain consistent cycle times. Compatibility with SDMT 09T3 indexable inserts manufactured by ZCC ensures access to widely available grades and geometries, enabling optimized cutting parameters for alloyed steels and general workshop materials. The result is a reliable balance between removal rate and surface quality, suited to repetitive machining tasks. Fast insert changes and secure clamping reduce downtime Maintenance and insert replacement are straightforward thanks to the standardised fastening: Torx screw M3.5x8.5 tightened with a T15 key, and a compact 16 mm shank for secure seating in smaller toolholders. The robust screw and key combination keeps insert clamping precise, minimising the need for repeated adjustments and lowering machine downtime. With a lightweight assembly of approximately 0.215 kg, handling and tool change operations are simplified, which benefits small-batch production and mixed-operation shops where quick turnaround is essential. Consistent surface finish through stable cutter head design A well-balanced cutter head profile and four equally spaced cutting edges contribute to a steady cutting action and predictable chip formation. The resulting surface integrity supports downstream processes such as finishing and inspection without the need for excessive rework. The construction offers predictable deflection characteristics under standard cutting loads, so finishing cycles can be reliably planned and quality targets achieved with fewer trial cuts. This stability is particularly valuable when machining interrupted cuts or short overhangs. Compatibility and supply reliability for workshop integration Designed for indexable insert systems, the head matches SDMT 09T3 inserts from ZCC, making tool sourcing and grade selection straightforward. The compact overall length and standard shank diameter ease integration into existing toolholder inventories. For procurement and logistics, Metav Werkzeuge’s Emmerich location acts as a dependable supply channel, offering a broad range of complementary tooling and accessories to complete a machining setup. Technical documentation and product files linked to the SKU support planning and maintainability in production environments. Contact Metav Werkzeuge in Emmerich for tailored technical advice and reliable supply of the T362TM face milling head, ensuring fast integration into production workflows Technical Data SKU: T362TM Manufacturer: Teknik Makina Compatible inserts: SDMT 09T3 Compatible insert manufacturer: ZCC Description (EN): for SDMT 09T3 Indexable Inserts Facts Diameter: 40 mm Shank diameter: 16 mm Overall length: 40 mm Cutting edges: 4 Weight: 0.215 kg Special features Torx screw M3.5x8.5 Torx key: T15 Suitable for indexable insert face milling Compact design for reduced overhang FAQ Which inserts fit this cutter head? The head is designed for SDMT 09T3 indexable inserts; compatibility with ZCC SDMT 09T3 grades is specified for the T362TM face milling head. What fastening hardware is used for the inserts? Inserts are secured with a Torx screw M3.5x8.5, tightened using a T15 key, providing secure and repeatable clamping for the cutter head. What toolholder dimensions are required? The cutter requires a toolholder with a 16 mm shank bore for correct seating and rigid clamping of the assembly. Is the head suitable for heavy roughing? The compact geometry and four-edge configuration are optimised for facing and light to medium material removal; for heavy roughing, a larger dedicated roughing head is recommended. What is the weight and size of the cutter head? The assembly has a 40 mm diameter, 40 mm overall length and weighs approximately 0.215 kg, making it suitable for compact tool setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Face Milling Cutter SNKX 1206 With Internal Cooling, 45mm Length - Teknik Makina
Take advantage of a compact, purpose‑built design that combines 40 mm cutting head diameter with a 45° cutting angle and internal coolant to deliver consistent face‑milling results; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Face milling head T319-1TM – 40 mm diameter, internal coolant (Teknik Makina) Face milling head T319-1TM for SNKX 1206 indexable inserts, engineered for face‑milling operations where surface quality and reliable chip evacuation are essential 40 mm cutting head diameter Internal coolant for improved chip control Compatible with SNKX 1206 indexable inserts 45° cutting angle for smooth surface finish Higher throughput with predictable cutting performance The compact cutter body and the 45° rake geometry are combined to reduce cutting forces and to favour a stable engagement during face milling tasks. By pairing a robust cutter body with SNKX 1206 indexable inserts (Korloy), the assembly achieves an efficient balance between material removal and surface finish. The 40 mm head diameter and the stated maximum cutting diameter of 53 mm permit consistent passes on small to medium workpieces, supporting predictable cycle times and reduced rework. This results in measurable productivity gains on repetitive production runs. Improved process reliability through internal coolant and secure fixing Internal coolant is routed through the cutter to the insert pockets, promoting active cooling at the cutting edge and cleaner chip breakage; this feature helps extend insert life and maintain dimensional consistency. The head uses M4x12.5 fastening screws with a T15 Torx drive for secure clamping and simple torque application during tool changes. The three cutting edges arrangement provides balanced cutting action and reduces vibration, which supports repeatable component quality across batches and minimises downtime for adjustments. Designed for easy integration and dependable handling With an overall length of 45 mm and a net weight of 0.417 kg, the cutter head is compact enough for tight setups while still offering rigid support for the insert geometry. The body accepts SNKX 1206 indexable inserts and is compatible with Korloy insert types, allowing straightforward stocking and inventory management. Maintenance is simplified by standardised fasteners and the common insertion system, so toolroom staff can replace inserts and secure the head quickly, keeping machine uptime high and maintenance effort low. For technical consultation or to equip a workstation with the T319-1TM face milling head, contact Metav Werkzeuge in Emmerich to discuss application specifics and delivery options. Technical data SKU: T319-1TM Product type: Face milling head Brand: Teknik Makina Facts Diameter: 40 mm Overall length: 45 mm Weight: 0.417 kg Max cutting diameter: 53 mm Cutting angle: 45° Number of cutting edges: 3 Fastening screw: M4x12.5 Torx key: T15 Internal coolant: Yes Special features Compatible with SNKX 1206 indexable inserts (Korloy) Internal coolant for direct edge cooling Compact body for small to medium workpieces FAQ Is the milling head compatible with SNKX 1206 inserts? Yes. The T319-1TM is designed specifically for SNKX 1206 indexable inserts and is compatible with Korloy insert variants. Does the head provide coolant directly to the cutting edge? The cutter features internal coolant channels that deliver fluid close to the insert, aiding chip control and thermal management for prolonged insert life. What fastening hardware is required for installation? The assembly uses M4x12.5 screws tightened with a T15 Torx key to secure inserts and ensure a consistent clamping force. Which applications benefit most from this cutter head? The design suits face‑milling and finishing operations on small to medium workpieces where a 45° cutting angle and controlled chip evacuation improve surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Face Milling Head for 100° ENMX 0604 Indexable Inserts, 6 Cutting Edges - Teknik Makina
Take advantage of the robust 100° cutting geometry and precise 16 mm shank for dependable face milling operations; the combination of secure Torx fastening and compatibility with ENMX 0604 indexable inserts supports consistent tool performance and fast insert replacement — order the face milling head directly via Metav Werkzeuge or request technical advice from our consultants. Face milling head T763TM — 100° face milling head for ENMX 0604 indexable inserts (Teknik Makina) A face milling head engineered for 100° ENMX 0604 indexable inserts, designed for reliable face milling and straightforward insert changes 100° cutting angle for heavy face milling Fits ENMX 0604 indexable inserts (YG-1 compatible) 16 mm shank diameter, 40 mm head diameter Secured with M2.5x7 Torx screw; T8 key Reliable cutting geometry for consistent material removal The face milling head offers a 100° cutting angle that is optimised to deliver stable contact during face milling cycles. This geometry supports a controlled cutting engagement that can reduce vibration and promote even load distribution across the insert edge. With a head diameter of 40 mm and an overall height of 40 mm, the tool body provides a compact yet rigid platform that contributes to repeatable results on each pass. The design therefore emphasises process reliability and predictability for production runs where consistency matters. Precision fit and secure clamping for operational safety A precise 16 mm shank diameter ensures a defined fit in tool holders that accept that mounting dimension, reducing radial play and improving concentricity. The insert is secured with a M2.5x7 Torx screw, driven by a T8 key, which simplifies maintenance while ensuring a firm mechanical connection. The number of effective cutting edges (six) and the solid clamping arrangement minimise the risk of insert movement under load, supporting safe, long-term operation and straightforward changeover procedures. Compatibility and practical handling to save shop time Compatibility with ENMX 0604 indexable inserts and documented suitability for YG-1 inserts makes selection of replacement cutting parts straightforward and traceable. The tool body is configured for fast insert swaps and secure fastening, which shortens downtime during maintenance. Clear specification of the mounting size and fastening standard helps in planning tooling inventories and in matching the cutter to existing holders. As a compact face cutter, it is suitable for shops seeking a reliable milling head that integrates into established tooling systems. For precision face milling with Teknik Makina quality, contact Metav Werkzeuge for tailored supply and technical advice — info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: T763TM ECLASS: 21181015 Manufacturer: Teknik Makina Facts Head diameter: 40 mm Overall height: 40 mm Shank diameter: 16 mm Number of cutting edges: 6 Cutting angle: 100° Special features Compatible inserts: ENMX 0604 Insert supplier compatibility: YG-1 Torx screw: M2.5x7 Torx key: T8 SKU / UID: T763TM FAQ Which inserts are compatible with this face milling head? The face milling head accepts ENMX 0604 indexable inserts; compatibility with YG-1 inserts is specified for straightforward replacement. What is the cutting angle and why is it relevant? The cutter uses a 100° cutting angle, which helps to stabilise the cutting engagement and supports controlled material removal during face milling. How is the insert fastened to the tool? The insert is secured by a M2.5x7 Torx screw, tightened with a T8 key, providing a reliable mechanical clamp that simplifies insert changes. What shank size is required for mounting the tool? A tool holder with a 16 mm shank reception is required to mount the face milling head with the specified fit and concentricity. How many cutting edges are available per assembly? The cutter body is configured with six cutting edges, allowing efficient use of the insert geometry as intended by the indexable design. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Planflächen schneller und präziser herstellen
Planfräser, auch als Planfräswerkzeug oder Stirnplanfräser bezeichnet, sind meist mit Wendeschneidplatten bestückte Trägerwerkzeuge für Fräsmaschinen. Sie ermöglichen das großflächige Abtragen von Material, das Planfräsen von Werkstücken auf Maß und die Erzeugung einer gleichmäßigen, planaren Oberflächenstruktur.
Wie das Planfräswerkzeug technisch wirkt und wann es unabdingbar ist
Ein Planfräswerkzeug arbeitet offen auf der Materialoberfläche, sodass Späne radial abgeführt werden. Bei Ausführungen ohne Innenkühlung erfolgt die Wärme- und Spanableitung über externe Kühlmitteldüsen oder zugeführte Druckluft; das ist bei vielen regulären Planfräsarbeiten ausreichend. Modelle mit Innenkühlung verfügen über integrierte Bohrungen und Kanäle, die Kühlschmierstoff oder Blasluft direkt an die Schneidkanten leiten. Diese gezielte Zufuhr verhindert thermische Überlastung, reduziert Aufbauschneidenbildung und spült Späne zuverlässig aus der Schnittzone – entscheidend bei schwerzerspanenden, klebenden Werkstoffen oder sehr großen Schnittbreiten.
Mehr Effizienz im Werkstattalltag durch gezielten Einsatz
- Reduziert Rüstzeiten durch modulare Bestückung mit Wendeschneidplatten und einfachem Plattenwechsel.
- Verbessert die Oberflächengüte durch gleichmäßige Spanabfuhr und, bei Bedarf, gezielte Innenkühlung.
- Erhöht die Standzeit der Werkzeuge, weil thermische Belastung und Aufbauschneidenbildung minimiert werden.
- Sorgt für konstante Maßhaltigkeit bei großflächigen Bearbeitungen dank stabiler Trägerwerkzeuge.
Metav als zuverlässiger Partner für Ihre Planbearbeitung
Metav steht für Demokratisierung der Präzision und kombiniert jahrzehntelange Fachkompetenz mit einem breiten Sortiment. Aus dem Lager in Emmerich liefert Metav als Qualitätsfilter ein Sortiment, das Werkstätten und Industrie mit technisch passenden Planfräsern versorgt. Mit über 48.000 zufriedenen Kunden und mehr als 250.000 Produkten bietet Metav die Auswahl und Verfügbarkeit, um die passende Ausführung — mit oder ohne Innenkühlung — für Ihre Bearbeitungssituation zu finden.
Kurz und prägnant
Ein Planfräser ist das zentrale Werkzeug, wenn große, ebene Flächen schnell, maßhaltig und mit hoher Oberflächenqualität herzustellen sind. Die Wahl zwischen ohne Innenkühlung und mit Innenkühlung richtet sich nach Werkstoff, Schnittbreite und Wärmeentwicklung.
FAQ
Wann ist ein Planfräser mit Innenkühlung erforderlich?
Bei schwerzerspanenden oder stark wärmeentwickelnden Werkstoffen sowie bei sehr großen Schnittbreiten empfiehlt sich ein Planfräser mit Innenkühlung, weil die gezielte Kühlschmierstoffzufuhr thermische Überlastung und Aufbauschneidenbildung verhindert.
Reicht bei normalen Stahlblechen ein Planfräswerkzeug ohne Innenkühlung aus?
Für viele reguläre Planfräsarbeiten an unlegierten und niedrig legierten Stählen ist ein Planfräswerkzeug ohne Innenkühlung ausreichend, da Späne offen radial abfließen und externe Kühlmitteldüsen oder Druckluft die Wärmeableitung übernehmen.
Wie verlängert man die Standzeit von Planfräsern effektiv?
Die Standzeit eines Planfräswerkzeugs lässt sich durch passende Wendeschneidplatten, richtige Schnittparameter, konsequente Spanabfuhr und bei Bedarf durch Innenkühlung deutlich erhöhen.
Welche Vorteile bieten modulare Planfräswerkzeuge im Produktionsalltag?
Modulare Planfräser ermöglichen schnellen Plattenwechsel, reduzieren Rüstzeiten und erlauben die Anpassung an unterschiedliche Schnittbreiten und Werkstoffe ohne kompletten Werkzeugwechsel.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com