Planfräser für schnelle, plane Flächenbearbeitung
Planfräser sind speziell entwickelte Trägerwerkzeuge zum großflächigen Abtrag und exakten Planfräsen von Werkstücken und verbessern die Oberflächenqualität sowie die Prozessstabilität bei der Bearbeitung von Stahl, Guss und NE-Metallen; sie kommen sowohl in offener Ausführung ohne Innenkühlung als auch als innengekühlte Varianten zum Einsatz, wobei die innengekühlte Version durch gezielte Kühlmittelzufuhr thermische Überlastung verhindert und die Standzeit erhöht. Die Werkzeuge dienen dazu, große Schnittbreiten effizient zu bearbeiten und durch optimale Spanabfuhr eine gleichmäßige Oberfläche zu erzeugen, wobei die offene Ausführung einfache Fräsaufgaben mit externer Kühlung abdeckt. Planfräser bieten besonders bei schwer zerspanbaren, wärmeempfindlichen oder klebenden Werkstoffen Vorteile, weil die innengekühlte Bauform die Bildung von Aufbauschneiden reduziert und die Oberflächengüte verbessert.
50mm Face Milling Head for XNKU 06T3 Indexable Inserts With Internal Coolant, 90° Cutting Angle - Teknik Makina
The compact design, 50 mm diameter and internal coolant make this face milling head a reliable choice for precise surfacing tasks; its six cutting edges and 90° cutting geometry ensure consistent shoulder quality and balanced wear. Order the cutter directly via Metav Werkzeuge or request advice from the consultants for smooth integration into existing tool sets. Face milling head T684TM – 50 mm diameter, internal coolant (Teknik Makina) The face milling head for XNKU 06T3 indexable inserts is a compact surfacing cutter head with internal coolant, designed for precise finishing and square-shoulder milling in confined setups. 50 mm cutting head diameter Internal coolant supply Six cutting edges for even wear Compatible with Palbit XNKU 06T3 inserts Process stability through compact, balanced design The compact cutter body combines a 50 mm diameter with a short overall length to reduce overhang and vibration, improving stability during finishing operations. The combination of six evenly distributed cutting edges and a 90° cutting angle supports consistent shoulder geometry and predictable tool life. Reduced tool movement leads to fewer reworks and steadier part tolerances, which is particularly valuable in small-batch production and precision workshops where machining consistency directly affects throughput and cost-efficiency. Integrated coolant for cleaner chips and longer service intervals Built-in internal coolant channels direct cutting fluid precisely to the cutting edge, improving chip evacuation and thermal control at the cutting zone. This targeted cooling reduces edge wear and helps preserve surface finish, so the cutter maintains performance over more cycles. The result is lower changeover frequency and a more reliable machining window, which supports leaner tool inventory management and fewer unscheduled stops on the shop floor. Fast insert changes and service-friendly fixation Compatibility with XNKU 06T3 indexable inserts and recognition of common insert suppliers such as Palbit simplify logistics and tool provisioning. Fast replacement is enabled by the M2.5x7 Torx screw and the matching T8 key, allowing quick, exact re‑clamping during maintenance. The use of standardised fixings minimises downtime and makes the cutter well suited to production environments that require predictable service intervals and straightforward spare-part handling. Designed for tight spaces and accurate surfacing The short overall length and modest mass of the cutter help in applications where access is restricted or where multiple setups would otherwise be required. The cutter is engineered for face and shoulder milling tasks where a true 90° shoulder is needed; its balanced design contributes to steadier feed rates and reduced chatter. Combined with the integrated coolant and multiple cutting edges, this head supports efficient, repeatable surfacing operations without compromising finish or cycle time. For procurement or technical queries regarding the Teknik Makina face milling head T684TM, contact Metav Werkzeuge for supply from Emmerich and tailored advice by e‑mail at info@metav-werkzeuge.com or by telephone at +49 2822 7131930 Technical data SKU: T684TM Manufacturer: Teknik Makina Core data Diameter: 50 mm Overall length: 40 mm Weight: 0.361 kg Cutting edges: 6 Cutting angle: 90° Special features Internal coolant For XNKU 06T3 indexable inserts Compatible with Palbit inserts Torx screw M2.5x7 Torx key T8 eClass: 21181015 FAQ Which indexable inserts fit this cutter? The face milling head accepts XNKU 06T3 indexable inserts; compatibility with Palbit‑type inserts is indicated for straightforward procurement and stocking. How does the internal coolant benefit machining performance? Internal coolant in the T684TM directs fluid to the cutting edge, improving chip evacuation and cooling to extend edge life and preserve surface finish during extended cycles. What is the significance of the 90° cutting angle? A 90° cutting angle produces square shoulders and clean part edges; the geometry is especially useful for finishing operations where perpendicular faces and tight tolerances are required. What fastenings are used for insert replacement? Insert clamping uses a Torx screw M2.5x7 secured with a T8 key, enabling rapid and repeatable insert changes with standardised tooling. Is the cutter suitable for confined or compact setups? Yes; the compact overall length and 50 mm diameter reduce overhang and improve stability, making the cutter suitable for tight workspaces and setups that demand low vibration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Face Milling Head SNKX 1606 L48mm With Internal Coolant, 4-Cutter 45° - Teknik Makina
Benefit from a compact 50 mm body, effective internal coolant and four cutting edges for reliable face milling results; order directly via Metav Werkzeuge or request application advice from our consultants. Face milling head T628-1TM — 50 mm body, internal coolant (Teknik Makina) The Face milling head T628-1TM is a purpose-built cutter body for high-efficiency face milling with SNKX 1606 indexable inserts, ideal for machining centres where space and consistent surface quality matter. 50 mm body diameter for compact setups Internal coolant for improved chip evacuation Four cutting edges for higher material removal Compatible with SNKX 1606 Palbit inserts Efficient removal in confined setups The compact 50 mm body diameter combines rigidity with access in crowded tool zones, enabling higher effective material removal rates on face operations. With a maximum cutting diameter of 63 mm and a 45° cutting angle, the design supports shallower radial depths while maintaining stable cutting conditions. This results in shorter cycle times and repeatable surface finish, making the head a sound choice where throughput and consistency are paramount. Coolant-fed design that prolongs tool life The integrated internal coolant channel delivers cutting fluid directly to the cutting zone, improving chip evacuation and temperature control. Better cooling reduces thermal load on the insert pockets and cutting edges, which helps to extend insert life and maintain dimensional stability over longer series. For operations sensitive to heat-related wear, the coolant-fed arrangement supports more reliable process windows and fewer unplanned tool changes. Compatibility and quick serviceability for production floors Designed for SNKX 1606 indexable inserts and matched to Palbit geometries, the cutter head simplifies inventory by using a common insert family. The head accepts the specified M5x12 Torx screws and is set up with a T20 Torx key for straightforward reconditioning during service intervals. With four indexed cutting edges, insert rotations reduce tooling costs per produced component and support efficient shop-floor routines. Solid construction for repeatable accuracy A balanced cutter body weighing 0.458 kg and a total length of 48 mm provide the mechanical stability required for face milling across a range of production tasks. The combination of a compact form factor and a robust clamp arrangement ensures consistent runout control and predictable engagement with workpieces. When paired with appropriate machining parameters and SNKX 1606 inserts, the arrangement helps to secure reproducible dimensional outcomes and surface integrity. Contact Metav Werkzeuge for tailored application advice or to secure the Teknik Makina T628-1TM face milling head from stock in Emmerich; technical consultations and prompt shipping are available via Metav Werkzeuge. Technical data Article number: T628-1TM Product type: Face milling head Brand: Teknik Makina Label: 50 mm face milling head SNKX 1606 L48 mm with internal coolant Facts Body diameter: 50 mm Overall length: 48 mm Weight: 0.458 kg Max cutting diameter: 63 mm Cutting angle: 45° Cutting edges: 4 Special features Internal coolant For SNKX 1606 indexable inserts Compatible with Palbit inserts Torx key: T20 Torx screw: M5x12 ECLASS: 21181015 FAQ Which inserts fit this milling head? The T628-1TM accepts SNKX 1606 indexable inserts and is compatible with Palbit-manufactured insert geometries specified for that designation. Does the cutter head support coolant-through operation? Yes, the face milling head features internal coolant, directing fluid to the cutting zone to aid chip evacuation and thermal control. What torque tool is required for insert changes? Insert screws are M5x12 Torx fasteners and are designed for a T20 Torx key for removal and fitting. How many cutting edges are available per insert index? The cutter arrangement provides four indexed cutting edges, enabling sequential indexing to extend insert life and reduce cost per part. Is the head suitable for compact machining centres? The 50 mm body diameter and 48 mm overall length make the head well suited to tight toolspaces while providing the stiffness required for face milling. Manufacturer/Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Face Milling Head SNMX 1206 L40mm Internal Coolant, 88° Cutting Angle - Teknik Makina
Combine the compact 50 mm diameter, internal coolant and five cutting edges to achieve efficient facing with reduced downtime; order the face milling head directly via Metav Werkzeuge or consult our specialists for configuration advice. Face milling head for SNMX 1206 indexable inserts — 50 mm, internal coolant A face milling head engineered for precise facing and finishing with SNMX 1206 indexable inserts in compact machining setups. 50 mm diameter for compact operations Internal coolant to the cutting edge Compatible with SNMX 1206 inserts by Korloy Five cutting edges for high material removal Maximised facing performance with a compact design The compact 50 mm diameter body delivers high productivity where space is limited, while the five cutting edges permit substantial material removal per revolution. With an almost perpendicular 88° cutting angle, the tool produces flat faces with minimal scallop height and consistent surface integrity. The reduced mass of 0.348 kg lowers the dynamic load on the spindle, improving cycle stability and allowing faster acceleration and deceleration without compromising runout. These characteristics translate into shorter cycle times and predictable throughput for short-run and series production alike. Fast replacement and secure clamping for uninterrupted processing Designed for straightforward maintenance, the head accepts SNMX 1206 indexable inserts from Korloy and secures them with M4x12.5 Torx screws (Torx key T15), enabling rapid insert exchange and repeatable clamping. The standardised screw and key format simplifies stocking of consumables and tools in the workshop. Clear mechanical interfaces reduce setup errors, so abrasive wear or broken inserts can be replaced quickly and spindle dwell time is minimised, which improves overall equipment effectiveness in the machine shop. Targeted cooling that extends insert life and safeguards process stability Integrated internal coolant channels deliver cutting fluid directly to the cutting edge, reducing thermal load and evacuating chips more effectively than external flood cooling alone. By maintaining lower cutting temperatures, insert wear is slowed and edge life extended, which lowers tooling costs per component and reduces the frequency of tool interventions. This controlled cooling also stabilises metallurgical effects at the cut zone, supporting consistent tolerances across runs and helping to maintain dimensional quality without extensive secondary finishing. Suited to modern CNC shops and versatile facing tasks The design is optimised for CNC milling centres and compact turning/milling applications where access and precision matter. The head’s balanced geometry supports reliable indexing and contributes to a steady cutting process, while its compact footprint makes it suitable for multi-axis set-ups and close-quarters fixturing. Whether required for finishing passes or medium-duty roughing where flatness and surface finish are priorities, the tool offers a robust combination of performance and ease of use for professional metalworking environments. Contact Metav Werkzeuge today to discuss the Teknik Cutting Tools face milling head T343-1TM with internal coolant and confirm the right specification for your production needs; our Emmerich team will advise on compatibility and supply options. Technical Data SKU: T343-1TM Product type: Face milling head Manufacturer: Teknik Makina Label: 50mm Planmesserkopf SNMX 1206 L40mm mit Innenkühlung Facts Diameter: 50 mm Overall length: 40 mm Weight: 0.348 kg Cutting angle: 88° Cutting edges: 5 Special features Internal coolant For SNMX 1206 indexable inserts Compatible with Korloy inserts Torx key: T15 Torx screw: M4x12.5 Eclass: 21181015 FAQ What insert type fits this head? The head is configured for SNMX 1206 indexable inserts; Korloy SNMX 1206 inserts are compatible with the clamping interface provided. How does the internal coolant improve tool life? Direct coolant delivery to the cutting edge reduces temperature and improves chip evacuation, which increases insert life and supports consistent cutting performance with the face milling head T343-1TM. Which key and screw are required for insert clamping? Insert clamping uses M4x12.5 Torx screws and requires a Torx T15 key for secure and repeatable fastening. Is this head suitable for compact CNC machines? Yes. The compact 50 mm diameter and low mass make the head well suited to compact CNC cells and tight-access facing operations. Who supplies and supports this product? Teknik Cutting Tools manufactures the head; Metav Werkzeuge can advise on selection and supply for workshop needs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Face Turning Head For PNMU 1006 Indexable Inserts, 4 Cutting Edges, 22mm Shank - Teknik Makina
Take advantage of reliable mounting and stable cutting performance to maintain consistent face-milling results and reduce downtime; order the Planmesserkopf T722TM directly via Metav Werkzeuge or ask their consultants for application advice. Planmesserkopf T722TM — face-milling head with Ø50 mm diameter and 4 cutting edges by Teknik Makina The Planmesserkopf T722TM is a compact face-milling head for indexable inserts, engineered for metal-cutting operations where secure mounting and repeatable results matter Ø50 mm head diameter Four cutting edges for smooth material removal 22 mm mounting bore for firm clamping Torx T15 fixing screws M4x10 Consistent machining quality through stable geometry The milling head combines a precise outer diameter and a compact overall height to deliver a stable cutting platform. With a nominal Ø50 mm cutter body and 4 cutting edges, vibration is reduced and surface finish is improved; this leads to fewer rework cycles and more predictable cycle times. The result is higher first‑pass quality in routine machining, which supports efficient production planning and lower overall manufacturing costs. Fast, secure insert changes to keep processes moving A robust fixing system, specified with Torx T15 drive and M4x10 screws, ensures that inserts remain clamped under varying cutting forces. The head accepts indexable inserts, which are rapidly indexed or replaced without removing the holder; maintenance is simplified and cutter availability is maximised. These features translate into measurable reductions in tool-change time and improved uptime on the shop floor. Versatile mounting and proven compatibility The component fits a 22 mm mounting bore and is matched with established insert manufacturers such as YG-1, providing interchangeability within common tool systems. Its compact overall height supports constrained setups while the multi‑edge design enables balanced material removal. For operations seeking a dependable face-milling solution from a recognised supplier, this head represents a pragmatic choice that emphasises long-term usability and supply reliability. For tailored advice on the Teknik Makina face-milling head with Ø50 mm working diameter, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to discuss compatibility and delivery options Technical data Article number: T722TM Manufacturer: Teknik Makina SKU: T722TM Dimensions & core data Diameter: 50 mm Overall height: 40 mm Number of cutting edges: 4 Mounting bore: 22 mm Mounting & special features Torx key: T15 Fixing screw: M4x10 Compatible insert manufacturer: YG-1 FAQ Which insert types fit this milling head? The milling head is designed for indexable inserts and is compatible with inserts from YG-1 as indicated in the product specification. What is the mounting diameter required? The tool requires a 22 mm mounting bore for installation. How many cutting edges does the head provide? The head is equipped with four cutting edges, allowing balanced cutting and improved surface finish. Which screw type secures the inserts? Inserts are secured using Torx T15 screws specified as M4x10 for reliable clamp force. Is the head suitable for compact setups? Yes, the compact overall height of 40 mm supports installation in constrained tool arrangements while maintaining performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Face Turning Tool Head for LOGU 0303 Indexable Inserts T15 Torx M3x7, 7 Cutting Edges - Teknik Makina
Take advantage of a compact face-milling solution that combines precise compatibility with LOGU 0303 indexable inserts and robust clamping for reliable production runs; the tool’s Ø 50 mm diameter and 22 mm connection deliver rigidity and repeatability. Order the Planmesserkopf directly via Metav Werkzeuge or ask our consultants if needed. Planmesserkopf — face‑milling head, Ø 50 mm, for LOGU 0303 indexable inserts (Teknik Makina) The Planmesserkopf is a dedicated face‑milling head designed to accept LOGU 0303 indexable inserts, intended for short‑run and production facing tasks where fast insert changes and consistent surface quality are required. 50 mm diameter milling head Compatible with LOGU 0303 KYCR inserts Seven cutting edges for efficient removal T15 Torx screw fixation with M3x7 screws Precise insert system for predictable productivity The milling head accepts LOGU 0303 indexable inserts in the KYCR pocket format, a standardised insert family that simplifies tool sourcing and inventory management. Using indexable inserts means that cutting edges can be rotated or replaced without removing the holder from the machine, which reduces downtime and ensures constant cutting geometry. The modular design supports consistent chip control and repeatable surface finishes, making this solution suitable for busy production and jobbing shops that require predictable cycle times and lower per‑part tooling costs. Stiff geometry and compact dimensions for stable machining With a nominal Ø 50 mm head and an attachment diameter of 22 mm, the tool is balanced for face milling where rigidity matters. The overall height 50 mm contributes to a compact footprint while maintaining sufficient mass to damp vibration, and the provision of seven cutting edges distributes cutting forces to sustain steady chip formation. These mechanical characteristics translate into improved tool life for the inserts and more reliable tolerances on the workpiece, especially when repeatability and concentricity are priorities in manufacturing sequences. Secure clamping and straightforward maintenance to keep lines moving Fixing is handled by T15 Torx drive and M3x7 screws, offering a torqueable, low‑play connection that eases insert changes and maintenance routines. The screw fixation reduces the risk of micro‑movement under cutting loads and simplifies service procedures on the shopfloor. Manufactured by Teknik Makina, the head reflects industrial expectations for robustness and quick changeover. For teams aiming to maintain steady throughput, the secure clamping and standardised insert compatibility reduce set‑up time and support a clear process for preventive maintenance. Discuss integrating this Teknik Makina face‑milling head with Metav Werkzeuge for tailored tooling advice and fast provision — contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for technical guidance and supply options Technical data Article number: T732TM Manufacturer: Teknik Makina Product: Planmesserkopf for LOGU 0303 Indexable Inserts Compatible inserts: KYCR (Kyocera) Facts Diameter: 50 mm Overall height: 50 mm Connection / bore: 22 mm Cutting edges: 7 Torx key size: T15 Torx screw: M3x7 Special features Compatible with LOGU 0303 indexable inserts KYCR insert pocket, Kyocera compatible Secure Torx/M3x7 screw fixation SKU: T732TM FAQ Which insert types fit this milling head? The Planmesserkopf accepts LOGU 0303 indexable inserts in the KYCR pocket format; these are Kyocera‑compatible inserts designed for facing operations. What are the key dimensions to check for machine compatibility? Check the Ø 50 mm head diameter and the 22 mm connection/bore; the overall height is 50 mm, which helps assess clearance on the spindle and tooling setup. How many cutting edges are provided and what is the benefit? The tool is configured with seven cutting edges, distributing cutting forces and aiding chip removal to extend insert life and improve surface consistency. What fasteners and tools are required for insert changes? Insert retention uses a T15 Torx drive with M3x7 screws for secure, torqueable clamping and straightforward maintenance. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Facing Cutter Head 45° For SNMU 1305 Indexable Inserts, M5x12 Torx T20 - Teknik Makina
Take advantage of the combination of precise 45° cutting geometry and direct compatibility with ISCAR SNMU 1305 indexable inserts for efficient face milling; the compact 50 mm body with a 22 mm bore ensures simple integration into existing toolholders. Order the Planing Cutter Head directly via Metav Werkzeuge or ask the consultants for application advice. Planing Cutter Head T234TM — 45° face-milling head for SNMU 1305 indexable inserts by Teknik Makina A Planing Cutter Head T234TM engineered for 45° face milling, suited to production and job-shop CNC applications that use SNMU 1305 indexable inserts Face angle 45° for effective material removal Compatible with ISCAR SNMU 1305 inserts 50 mm body diameter with 22 mm bore Holds four cutting edges for continuous cutting Consistent material removal through optimised 45° geometry The compact cutting head features a 45° cutting angle, which promotes a favourable shear action and reduces cutting forces during face milling. This geometry is particularly advantageous when working on larger surface areas, as it balances chip formation and tool engagement to help achieve uniform surface finish. The tool module accepts ISCAR SNMU 1305 indexable inserts, meaning replacement of worn tips is quick and predictable; the result is less unplanned downtime and a more economical lifecycle for the tooling setup. By prioritising cutting efficiency in the design, the head supports shorter cycle times and stable machining even on mixed-batch production. Simple mounting and reliable clamping for fast changeovers Designed with a 22 mm mounting bore and a 50 mm outer diameter, the head provides a compact yet robust footprint that fits many standard milling arbor systems. The fastening hardware uses an M5x12 Torx screw and requires a T20 key for secure retention, reducing the risk of incorrect assembly and improving repeatability after each index or replacement. The clamping concept allows four active cutting edges to be presented in succession, so the cutter head maintains productive cutting while inserts are rotated or changed. For procurement and workshop planning, the unit’s modest mass of 0.48 kg makes handling straightforward without compromising stiffness. Workshop resilience and compatibility across common setups Built for practicality, the face-milling head is supplied for SNMU 1305 cutting plates, which are widely used across industry; compatibility with ISCAR offers access to established grades and chipbreakers. The tool’s robust design and measured overall height of 44 mm support stable axial positioning and predictable tool overhang calculations. Where tool repeatability and simple maintenance are priorities, this module reduces set-up time and the volume of spare tooling required. The T234TM is suitable as a standardised module for finishing and semi-finishing operations, providing a reliable option for systems that demand consistent surface quality. Efficiency, serviceability and application clarity Adopting a standardised insert style means that cutting parameters and wear behaviour are well known, simplifying process documentation and operator training. The face-milling head’s four-edge arrangement extends cutting intervals between insert changes, while the insert compatibility supports a wide choice of grades for steel, alloyed materials and cast components depending on the chosen insert specification. For users who require a predictable combination of tool life and surface integrity, this head represents a pragmatic balance between productivity and cost-effectiveness in high-throughput environments. For availability, delivery options and tailored application recommendations for the Teknik Makina face-milling head, contact Metav Werkzeuge — local expertise and supply from Emmerich for immediate integration into production. Technical Data Article number: T234TM Manufacturer: Teknik Makina ECLASS: 21180902 Compatible inserts: ISCAR SNMU 1305 Facts Diameter: 50 mm Overall height: 44 mm Bore / mounting diameter: 22 mm Cutting angle: 45° Number of cutting edges: 4 Weight: 0.48 kg Torx screw: M5x12 Torx key size: T20 Special features Face-milling head for SNMU 1305 indexable inserts Compatibility with ISCAR insert system Compact, robust construction for workshop use Designed for quick insert changes and stable clamping FAQ What inserts are compatible with this cutter head? The Planing Cutter Head T234TM is configured for ISCAR SNMU 1305 indexable inserts and accepts the standard SNMU plate form used in many production environments. How is the cutter head secured to the arbor? Mounting is via a 22 mm bore; the cutting head is clamped and secured using an M5x12 Torx screw tightened with a T20 key for reliable retention. How many cutting edges are available before an index or replacement is required? The head carries four cutting edges, enabling multiple index positions per insert and extending the effective cutting life between changes. Which applications suit this face-milling head best? The 45° geometry and SNMU insert compatibility make the head appropriate for general face milling, semi-finishing and light- to medium-duty production work where consistent surface finish and efficient chip evacuation are important. Is this module suitable for retrofit into existing tooling systems? Yes; the 22 mm bore and 50 mm diameter are intentionally compact to allow straightforward integration into many standard arbor systems used in CNC milling centres. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Indexable Corner Cutter 90° For ANKX 1205 Indexable Inserts, M4x10 Torx T15 - Teknik Makina
Benefit from the combination of defined 90° cutting geometry and secure Torx clamping for consistent shoulder operations; the compact Ø50 mm head and 45 mm overall length provide rigidity in confined setups. Order the corner cutting head directly via Metav Werkzeuge or consult our specialists for application guidance. Corner Cutting Head T572TM — 90° indexable insert head, Ø50 mm (Teknik Makina) The Corner Cutting Head T572TM is a compact turning head designed for use with ANKX-series indexable inserts, ideal for precise shoulder and profile machining in workshop and light industrial environments. 90° cutting angle for shoulder operations Compatible with ANKX indexable inserts by ISCAR Ø50 mm head diameter for stable cutting M4x10 Torx clamping screw, T15 key Consistent shoulder machining with defined 90° geometry The head delivers a 90° cutting angle, which produces square shoulders and clear profile faces with minimal rework. That fixed geometry reduces set-up variables and supports predictable tool-path programming on lathes and turning centres. By converting insert geometry into repeatable results, the component finish becomes more consistent and cycle times are reduced. The design suits applications where lateral rigidity and a defined contact face are required. Secure clamping and predictable repeatability for inserts Clamping is achieved with an M4x10 Torx screw operated with a T15 key, ensuring a positive, low-profile seat for indexable inserts. The system accepts ANKX indexable inserts from ISCAR, providing easy insert changes and repeatable positioning. Indexable tooling allows rapid replacement of worn cutting edges without regrinding, which reduces downtime and simplifies inventory management for production runs. Compact footprint for tight toolpost and turret spaces A head diameter of Ø50 mm and an overall length of 45 mm deliver the necessary rigidity in constrained setups. The reduced overhang lowers bending moments and helps maintain cutting stability when working close to centres or in multi-tool turrets. The unit’s shank diameter 22 mm supports secure mounting and straightforward integration with standard holders, making it a practical choice where space and stiffness are critical. Practical handling and workshop-ready specification Weighing 0.433 kg, the head is balanced for machine handling and repeatable tool changes. The configuration includes five cutting edge positions and a clear torque-fastening method for rapid service. The compact form and standard Torx interface make maintenance straightforward; replacement inserts and the specified screw set are widely available, supporting efficient back-to-back production shifts without complex tooling changes. For reliable shoulder turning with Teknik Makina quality, request a quotation from Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com or +49 2822 7131930 for tailored application advice. Technical data Article number: T572TM Product: Corner cutting head (Eckmesserkopf) Manufacturer: Teknik Makina Facts Diameter: 50 mm Cutting angle: 90° Overall length: 45 mm Weight: 0.433 kg Shank diameter: 22 mm Cutting edges: 5 Special features Compatible with ISCAR ANKX indexable inserts Torx screw M4x10 Torx key T15 Designed for shoulder and profile machining FAQ Which inserts fit this head? The head is compatible with ANKX-series indexable inserts from ISCAR; the T572TM accepts the standard ANKX insert form used for shoulder and profile operations. What is the head diameter and why does it matter? A Ø50 mm head diameter provides increased rigidity and better vibration damping, which improves surface finish and tool life when using the T572TM in interrupted or heavy cuts. Which clamping screw and key are required? Clamping is specified as M4x10 Torx with a T15 key for secure, repeatable insert retention on the T572TM. Is the head suitable for confined setups? Yes. With an overall length of 45 mm and a shank diameter of 22 mm, the head is compact and intended for installations where space and stiffness are both priorities. How many cutting edges are available before index change? The tool head accepts inserts with multiple usable edges; the assembly is configured for 5 effective cutting positions, enabling economical insert utilisation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Indexable Corner Cutter 90° For WNMU 0705 Indexable Inserts, M4x10 Fixing - Teknik Makina
Take advantage of the precise 90° geometry, proven compatibility with ISCAR WNMU 0705 indexable inserts and a compact 22 mm shank for straightforward integration into existing toolholders; order the component directly via Metav Werkzeuge or consult their specialists for application advice. 90° Corner Cutting Head – Teknik Makina indexable insert holder, right‑angle machining ready A 90° Corner Cutting Head engineered for milling applications with WNMU 0705 indexable inserts, delivering a robust right‑angle interface for workshop and production use 90° cutting angle for right-angle milling Fits ISCAR WNMU 0705 indexable inserts 22 mm shank diameter for secure mounting Secured with M4x10 Torx screw, T15 key Precise compatibility that simplifies tooling decisions The holder offers a 90° cutting geometry combined with dedicated compatibility for WNMU 0705 indexable inserts from ISCAR, which streamlines procurement and tool setup. Designed as a direct replacement or upgrade, the component ensures predictable cutting orientation and repeatable positioning when mounted on standard 22 mm toolholders. The supplied specifications, including the M4x10 Torx fixing interface and T15 key reference, clarify assembly needs and reduce guesswork during tool changes, supporting faster machine turnarounds and minimised setup time. Compact construction for stable machining and surface quality With a nominal diameter of 50 mm and an overall length of 40 mm, the tool head combines stiffness and accessibility in confined setups. Its lightweight construction (approx. 0.337 kg) reduces overhang-induced vibration while maintaining the rigidity required for consistent chip formation. The result is improved surface finish and extended insert life when milling at right angles, particularly useful in fixture-critical production runs where dimensional repeatability and low chatter are essential to maintain throughput and quality. Straightforward fitment and workshop readiness Practical assembly details are expressed in measurable terms to aid purchasing and inventory planning: 22 mm shank interface, direct fit for WNMU 0705 inserts, and a Torx‑secured clamp arrangement designed for secure retention under typical milling forces. The head’s geometry supports quick insert indexing and minimal adjunct tooling for changeovers. For operations requiring verified compatibility or additional technical data, Metav Werkzeuge provides advisory support and can supply the component ready for integration into production tooling systems For tailored machining recommendations or to secure the Teknik Makina 90° corner cutting head (SKU T392TM) through Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 for professional assistance Technical data Article number: T392TM Brand: Teknik Makina Compatible inserts: WNMU 0705 (ISCAR) Fixing screw: M4x10 Torx Fixing key: T15 Facts Shank diameter: 22 mm Diameter: 50 mm Overall length: 40 mm Weight: 0.337 kg Cutting angle: 90° Special features Number of cutting edges: 5 90° corner cutting design For indexable insert milling SKU: T392TM FAQ Is this head compatible with ISCAR WNMU 0705 inserts? Yes. The 90° corner cutting head is designed specifically for WNMU 0705 indexable inserts and is compatible with ISCAR insert dimensions and clamping form. What are the main dimensions and mass of the tool? Key dimensions: 22 mm shank diameter, 50 mm head diameter, 40 mm overall length; mass approximately 0.337 kg for the component. Which fixing hardware is required for assembly? Assembly uses an M4x10 Torx fixing screw and a T15 Torx key for secure clamping of the insert pocket. Is the design suitable for production right‑angle milling operations? Yes. The 90° geometry and compact, stiff construction make the head suitable for repeatable right‑angle milling where reliable insert positioning and reduced vibration are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Indexable Corner Cutter For APMT 11T3 Inserts, 90° Cutting Angle, M2.5x5.5 Torx Screw - Teknik Makina
Take advantage of a compact, service-friendly tool head that combines precise 90° geometry with universal APMT 11T3 insert compatibility to streamline finishing and light milling tasks; order directly via Metav Werkzeuge or contact the consultancy team for tailored mounting advice. Corner Tool Head T252TM — 90° for APMT 11T3 Indexable Inserts, Ø50 mm (Teknik Makina) The Corner Tool Head T252TM is a 90° indexable head designed for accurate face and profile operations using APMT 11T3 inserts on machines with a 22 mm mounting shank. Compatible with APMT 11T3 indexable inserts Ø 50 mm head diameter for compact operations 22 mm mounting shank for standard tool posts Six cutting edges with a 90° cutting angle Consistent chip control and process reliability The compact 90° head geometry delivers a predictable cutting direction and stable chip evacuation, which directly supports repeatable finishing results on small to medium workpieces. Built for indexable inserts such as APMT 11T3, the head provides a controlled contact area that reduces corner wear and helps maintain surface quality. The combination of a defined 90° cutting angle and six cutting edges allows for multiple indexing positions before replacement is necessary, extending tool-life and lowering running costs for frequent short-cycle tasks. Robust mounting and straightforward maintenance Engineered with a 22 mm mounting diameter and secured using an M2.5 x 5.5 Torx screw (Torx key T8), the head is easy to install and service within standard shop routines. The secure fastening system ensures stable clamping and repeatable positioning at every tool change, while the modest 0.332 kg weight minimises additional load on the turret or tool post. Maintenance cycles are shortened by the simple insert replacement procedure, enabling quick resumption of production and reducing downtime in multi-shift workshops. Practical applications and material suitability This indexable corner head is suited to light milling, facing and profiling where compact head size and precise geometry are required. It accepts APMT 11T3 format inserts and is listed as compatible with inserts from Korloy, making it adaptable across common insert suppliers. Typical uses include finishing passes on steel components, light aluminium work and fine profiling where a defined 90° corner is essential. The design prioritises process economy: fewer tool changes, efficient insert indexing and consistent results in batch and jobbing environments. Contact Metav Werkzeuge to discuss mounting options and delivery for the Teknik Makina Corner Tool Head T252TM and secure reliable supply from Emmerich. Technical data Article number: T252TM Manufacturer: Teknik Makina Weight: 0.332 kg Mounting diameter: 22 mm Head diameter: 50 mm Total length: 40 mm Cutting angle: 90° Suitable inserts: APMT 11T3 Compatible insert manufacturer: Korloy Torx screw: M2.5 x 5.5 Torx key: T8 Cutting edges: 6 Core dimensions Ø 50 mm head diameter 22 mm shank/mounting diameter 40 mm total length Weight 0.332 kg 90° cutting angle Features and compatibility Fits APMT 11T3 indexable inserts Compatible with Korloy inserts Six indexing positions/cutting edges Torx fastener system (T8) Compact design for constrained tool stations FAQ What inserts fit the T252TM tool head? The T252TM is designed for APMT 11T3 indexable inserts and is also compatible with Korloy inserts listed for that insert size. Which shank or tool post is required for mounting? Mounting requires a 22 mm shank interface; the head is intended for tool posts or turrets that accept a 22 mm diameter mounting. How is the insert secured and replaced? Inserts are clamped and secured with the supplied Torx screw (M2.5 x 5.5) using a T8 Torx key; this allows quick replacement and reliable clamping for the T252TM. Is the head suitable for finishing on aluminium and steel? Yes, the geometry and insert format make the head suitable for light finishing operations on aluminium and steel components where a 90° corner is required. How many cutting edges are available before insert replacement? The compatible insert configuration provides six usable cutting edges, extending service intervals and improving process economy for repetitive tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Indexable Corner Milling Head for XOMX 1204 Inserts, 90° Cut Angle, M3.5x8.5 Torx - Teknik Makina
Take advantage of a compact, rigid tool head that combines a 90° cutting angle with compatibility for common indexable inserts, ensuring reliable square-shoulder turning and efficient set-up; order via Metav Werkzeuge or consult the specialists if further advice is required. Square turning head T512TM — 90° cutting angle, for XOMX 1204 indexable inserts (Teknik Makina) The square turning head T512TM is designed for precise shoulder turning and reliable insert clamping in general workshop and production turning applications. 90° cutting angle for square shoulders Compatible with XOMX 1204 indexable inserts 22 mm shank diameter for standard holders Secured with M3.5x8.5 Torx screw (T10) Consistent shoulder geometry for dependable finishes The 90° cutting angle delivers consistently square shoulders with reduced need for secondary operations, which is essential when tight geometric tolerances are required. Integrated into a compact tool head, this geometry provides a stable cutting interface that helps maintain repeatable part dimensions and surface quality. Where batch consistency matters, the combination of clear angle definition and robust clamping reduces scrap and rework while improving process reliability. Secure clamping reduces vibration and downtime A reliable clamping system is central to repeatable machining. The head is fastened with a Torx M3.5x8.5 screw and requires a T10 key, offering a secure and accessible method of retaining the indexable insert. This arrangement minimises micro-movement under load and reduces vibration, which benefits insert life and surface finish. Compatibility with reputable insert systems also simplifies tool inventory management and changeover routines. Compact, rigid dimensions for stable cutting Engineered for standard toolholders, the head features a 22 mm shank diameter, a 50 mm head diameter and an overall length of 40 mm, with a mass of 0.351 kg. These dimensions provide a low overhang and a compact centre of gravity, supporting reduced runout and improved stiffness at the cutting zone. The compact form is particularly useful in constrained setups or when multiple tools are mounted on a turret, offering both accessibility and mechanical stability. Faster throughput with indexable insert compatibility Designed for use with XOMX 1204 indexable inserts and compatible with SECO insert geometries, the head supports rapid insert indexing and quick replacements. The configuration offers 5 cutting edges, allowing multiple repositions before replacement and therefore lower tooling costs per part. For production environments where minimising non-productive time is vital, this compatibility enhances flow and keeps machine uptime high. For specification support or to procure the Teknik Cutting Tools T512TM through Metav Werkzeuge, contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and ordering assistance Technical data Article number: T512TM Manufacturer: Teknik Makina SKU: T512TM Suitable for inserts: XOMX 1204 Compatible insert maker: SECO Torx screw: M3.5x8.5 Torx key: T10 Dimensions & weights Shank diameter: 22 mm Head diameter: 50 mm Overall length: 40 mm Weight: 0.351 kg Cutting angle: 90° Cutting edges: 5 Features & compatibility For XOMX 1204 indexable inserts SECO-compatible geometry Torx clamping for secure retention Compact profile for reduced overhang FAQ What type of operations is this head suited to? The square turning head T512TM is intended for square-shoulder turning and finishing where a defined 90° geometry and stable clamping are required; it is suitable for general workshop and production turning tasks. Which inserts fit this head? This head accepts XOMX 1204 indexable inserts and is compatible with SECO insert designs, allowing straightforward use of common insert grades and geometries. What are the key dimensions to check for toolholder compatibility? Check for a 22 mm shank diameter and a compact overall length of 40 mm when fitting the T512TM into standard toolholders to ensure correct seating and clearance. How does the Torx clamping affect maintenance? A Torx M3.5x8.5 screw (T10 key) provides simple, repeatable clamping; the configuration facilitates quick insert changes while maintaining secure retention and consistent cutting performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Indexable Face Mill For RDMT 12T3 Indexable Inserts, 5 Cutting Edges, 22mm Shank - Teknik Makina
Take advantage of the compact design and precise fit for RDMT 12T3 indexable inserts; the tool combines easy insert replacement and robust clamping for consistent milling results. Order directly via Metav Werkzeuge or contact our technical advisors for application-specific guidance. Round insert cutter — 50 mm diameter, 5 cutting edges (Teknik Makina) Round insert cutter for light to medium indexable milling tasks, engineered for compatibility with RDMT 12T3 indexable inserts and compact setups. Designed for RDMT 12T3 indexable inserts 50 mm cutting diameter Five cutting edges for smooth removal 22 mm shank, 40 mm overall length Small footprint, reliable repeatability for production The compact 50 mm cutter offers a space-saving solution for shoulder and face milling where accessibility is limited. With a 50 mm cutting diameter and a 22 mm shank, the tool is optimised for setups that require a smaller overhang without compromising stability. The modular nature of indexable inserts means wear is managed by replacing inserts rather than the whole tool, reducing downtime and cost per cutting edge. The relatively low mass (approx. 0.309 kg) keeps centrifugal imbalance to a minimum, supporting repeatable results and consistent surface finish in serial work. Fast indexable changes and secure clamping reduce downtime Changeover speed and secure fixing are central advantages of this design. The cutter uses a locking screw M3.5 and Torx fastenings (Torx screw M3.5x8.5 with Torx T15 key) to ensure quick, maintenance-friendly insert replacement and a positive clamping interface. The arrangement supports a straightforward procedure for replacing and indexing inserts, limiting non-productive time and helping maintain cycle times. Built for workshops and production cells, the geometry with five cutting edges provides a balanced cutting load, which contributes to stable cutting conditions and extended insert life when the correct grade is selected. Practical application advice and workshop compatibility The cutter’s 40 mm overall length and compact head profile make it suitable for constrained toolpaths and multi-axis machines where collision risk must be minimised. The design is a practical fit for toolholders with a 22 mm bore and for operations that benefit from quick insert indexing. For tool selection, pairing the cutter with the appropriate RDMT 12T3 insert grade will determine performance on specific materials; consultation on insert grade and coating is recommended for optimised tool life and surface quality. Metav’s specialists can advise on holder compatibility and insert choices to match production requirements. For a tailored recommendation for RDMT 12T3 applications, contact Metav Werkzeuge for procurement and technical advice from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T283TM Manufacturer: Teknik Makina For inserts: RDMT 12T3 Indexable Inserts Diameter: 50 mm Cutting edges: 5 Shank diameter: 22 mm Overall length: 40 mm Weight: 0.309 kg Dimensions & numbers Diameter: 50 mm Shank: 22 mm Overall length: 40 mm Weight: 0.309 kg Cutting edges: 5 Features & fittings Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 Compatible with RDMT 12T3 indexable inserts FAQ Which insert type fits this cutter? The cutter is specified for RDMT 12T3 indexable inserts and is designed to accept that insert form with the indicated clamping hardware. What size toolholder is required? A toolholder or arbor with a 22 mm shank diameter is required; the overall length of the assembly including the cutter is 40 mm. How are inserts secured and changed? Inserts are secured with a locking screw M3.5 and a Torx screw (M3.5x8.5). A T15 Torx key is used for tightening and removal. Is the cutter suitable for compact machine setups? Yes, the compact 50 mm diameter and 40 mm overall length make the tool well suited to tight toolpaths and constrained machining envelopes. What benefits do five cutting edges provide? A configuration with five cutting edges distributes cutting forces, promoting smoother material removal and contributing to steady cutting conditions and longer insert life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Indexable Face Mill For RHKW 0802 Inserts, M3.5 Clamp, T15 Torx - Teknik Makina
Take advantage of the combination of compact design, efficient five-edge cutting and simple insert replacement for steady productivity in milling applications; order the round insert milling cutter directly via Metav Werkzeuge or ask the consultants for machining advice T600TM Round Insert Milling Cutter — 50 mm diameter, for RHKW 0802 indexable inserts — Teknik Makina A T600TM round insert milling cutter engineered for stable face milling with RHKW 0802 indexable inserts and straightforward insert changes 50 mm cutting diameter for compact milling Five cutting edges for efficient material removal 22 mm shank for standard toolholders Compatible with RHKW 0802 indexable inserts High productivity through multi-edge cutting The T600TM is designed to deliver a reliable balance between cutting performance and tool life. With five cutting edges, the cutter increases the number of effective cuts per revolution, which helps to reduce cycle times while maintaining a consistent surface finish. The 50 mm diameter offers a compact solution for restricted setups and for operations where a modest cutter diameter improves access without sacrificing material removal. Indexable inserts mean that worn cutting edges are replaced rather than the whole tool, translating to predictable running costs and fast machine turnaround. Fast and secure insert clamping to reduce downtime A clear mechanical concept speeds maintenance: the cutter uses a Torx screw M3x7 and a clamping screw M3,5, operated with a T15 Torx key, enabling quick and repeatable insert changes. The compatibility with RHKW 0802 indexable inserts — a common insert size also offered by major suppliers such as Ingersoll — allows straightforward stock management and interchangeability. This reduces setup complexity and minimises non-productive time during tool changes, an advantage in batch production and mixed-series work. Stable mounting for consistent machining results The tool features a 22 mm shank that fits standard toolholders, offering reliable concentricity and reduced vibration at typical milling speeds. With an overall length of 40 mm and a mass of 0.309 kg, the cutter provides a low overhang and good rigidity, which supports dimensional stability and repeatable surface quality. The compact geometry simplifies integration into existing tool chains and supports accurate tool offsets in CAM setups. Application fit and workflow advantages Built for indexable-insert milling operations, the cutter is suitable where quick insert replacement, reliable clamping and compatibility with established insert systems are priorities. The use of indexable inserts keeps maintenance tasks simple and cost-effective, while the tool’s geometry supports a range of face-milling tasks in industrial workshops. By standardising on insert formats such as RHKW 0802, procurement benefits from reduced SKU complexity and easier stock rotation, backed by the supply and quality assurance offered through Metav Werkzeuge Contact Metav Werkzeuge today to request application guidance or to order the Teknik Cutting Tools T600TM round insert milling cutter with RHKW 0802 compatibility and ensure optimal integration into production workflows Technical Data Article number: T600TM Manufacturer: Teknik Makina Facts Diameter: 50 mm Overall length: 40 mm Shank diameter (toolholder): 22 mm Cutting edges: 5 Weight: 0.309 kg Torx screw: M3x7 Special features Compatible with RHKW 0802 indexable inserts Compatible with Ingersoll inserts Clamping screw: M3,5 Torx key size: T15 ECLASS: 21180902 ETIM: EC011860 FAQ Which inserts fit this cutter? The T600TM is specified for RHKW 0802 indexable inserts and is compatible with inserts from Ingersoll listed for that format What is the shank size and how does it affect mounting? The cutter has a 22 mm shank, which suits common toolholders and supports stable clamping and concentricity in typical milling setups How many cutting edges are available and what is the benefit? The tool features five cutting edges, increasing effective cutting actions per revolution and improving material removal rates for many face-milling tasks Which fasteners are used for insert clamping? Insert fixation is by a Torx screw M3x7 with a clamping screw M3,5; a T15 Torx key is recommended for secure and repeatable tightening Is the cutter suitable for compact or constrained workspaces? Yes, the 50 mm diameter and 40 mm overall length provide a compact footprint that facilitates access in tighter machining situations Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Indexable Turning Head 90° Cut Angle for R390-11T3 Indexable Inserts, M2.5x7 Torx - Teknik Makina
Take advantage of a precise 90° cutting angle and a compact 22 mm shank for fast, reliable corner turning; the robust clamping with Torx M2.5x7 screw and T8 key reduces downtime. Order the corner tool head directly via Metav Werkzeuge or consult our specialists for application advice. Corner Tool Head (Eckmesserkopf) — 90° indexable-head for R390‑11T3, 22 mm shank (Teknik Makina) The Corner Tool Head (Eckmesserkopf) is an indexable insert holder designed for precision corner turning and profiling with R390‑11T3 inserts, optimised for workshop and CNC lathe applications. 90° cutting angle for precise corner turning Supports R390‑11T3 indexable inserts (Sandvik) 22 mm shank diameter, 50 mm head diameter Torx M2.5x7 screw; T8 key for secure clamping Consistent corner geometry for repeatable production A fixed 90° cutting angle delivers consistent corner profiles across batches, making this head ideal where repeatability matters. The 50 mm head diameter stabilises the cutting assembly and helps maintain geometry when machining small corners and shoulders. Because the tool is an indexable-insert holder, the cutting edge can be renewed quickly without regrinding, so setup variation is minimised and part quality stays consistent. Fast insert changes and secure clamping to cut downtime Insert retention is handled by a Torx M2.5x7 screw operated with a T8 key, enabling quick and reliable replacement of indexable inserts. The holder accepts Sandvik R390‑11T3 inserts and provides six usable edges on a multi-edge insert format, extending service intervals and lowering consumable costs. With a compact 22 mm shank, the head fits common tool posts and turrets while its modest mass of 0.355 kg keeps handling and balancing straightforward during tool changes. Broad compatibility for workshop and CNC turning Compatibility with R390‑11T3 indexable inserts from Sandvik makes the head versatile for a range of turning tasks where defined corner radii and shoulder finishes are required. Indexable inserts simplify chip control and reconditioning: when an edge is worn, the insert is rotated or replaced rather than sharpening the holder. This modular approach suits both manual workshop use and automated production on turning centres, providing predictable cutting behaviour and easy stock management. Engineered for practical productivity and supplier confidence Built by Teknik Makina and offered through Metav Werkzeuge, this indexable insert head brings practical advantages to everyday machining: quick insert service, standard fastener sizes for common torque tools, and a geometry that supports reliable corner machining. Metav’s European distribution and quality control act as an additional assurance of supply continuity and product consistency, backed by a broad range of compatible tooling and decades of sector experience. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina corner tool head into existing setups and to arrange an order via Metav Werkzeuge’s sales team. Technical data SKU: T578TM Manufacturer: Teknik Makina Product name: Eckmesserkopf / Corner Tool Head for R390‑11T3 indexable inserts Core specifications Shank diameter: 22 mm Head diameter: 50 mm Total length: 40 mm Cutting angle: 90° Cutting edges (insert): 6 Weight: 0.355 kg Screw: M2.5x7 (Torx) Key size: T8 Features Compatible inserts: R390‑11T3 Compatible insert manufacturer: Sandvik Indexable insert holder design Compact, workshop-ready format FAQ Which indexable inserts fit this head? The holder accepts Sandvik R390‑11T3 indexable inserts; the head is configured specifically for this insert form and size. What shank size is required for installation? The head has a 22 mm shank diameter and is intended for toolposts or turrets that accept a 22 mm shank. How are inserts secured and replaced? Inserts are fastened with a Torx M2.5x7 screw, accessed using a T8 key for secure clamping and quick replacement on the Teknik Makina head (SKU T578TM). What turning tasks is the head best suited to? The 90° geometry is optimised for corner turning and shoulder profiling on CNC lathes and manual turning equipment where defined corner geometry is required. Is the tool heavy to handle during tool changes? With a weight of 0.355 kg, the head is compact and manageable for routine tool changes without special handling aids. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Indexable Turning Head 90° For LNGX 1307 Indexable Inserts M4x10 Torx T15, 22mm Shank - Teknik Makina
Take advantage of a compact, robust tool head that accepts standard LNGX 1307 indexable inserts and delivers precise 90° shoulder cuts; the combination of a Ø50 mm head, a 22 mm shank and secure Torx clamping ensures repeatable turning operations. Order directly via Metav Werkzeuge or consult the team for application advice. Corner Tool Head T490TM – for LNGX 1307 Indexable Inserts, Ø50 mm by Teknik Makina A durable corner tool head by Teknik Makina designed for external turning and 90° shoulder operations using LNGX 1307 indexable inserts For LNGX 1307 indexable inserts Ø50 mm head for stable machining 22 mm shank for secure mounting Torx M4x10 clamping with T15 key Consistent results through standardised insert compatibility The compact turning head accepts LNGX 1307 indexable inserts, making it simple to integrate into existing tool setups and to source replacement cutters from known suppliers. Compatibility with Walter-style inserts reduces inventory complexity and keeps setup times short. The standardised insert interface ensures predictable cutting geometry, which translates into consistent surface finish and reduced trial adjustments during batch production. Durable clamping and rigid design for stable cutting Clamping is achieved with an M4x10 Torx screw operated by a T15 key, providing secure fixation of the insert and minimising micro-movement under load. The 22 mm tool shank and Ø50 mm head diameter combine to increase stiffness at the cutting zone, supporting steady tool life and repeatability. The head’s configuration with four cutting edges allows straightforward indexing and extends productive tool usage between changeovers. Practical performance for common turning tasks With a 90° cutting angle and an overall length of 45 mm, the tool head is optimised for shoulder cutting and general external turning where clearances are tight. The modest mass of 0.425 kg keeps spindle loads low while maintaining the rigidity needed for accurate machining. For workshops seeking a compact, reliable holder, this solution balances ease of use with industrial robustness and is suitable for standard CNC lathes and manual turning centres. Speak to Metav Werkzeuge for tailored advice on Teknik Makina corner tool heads and to confirm the right LNGX 1307 configuration for the turning centre — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T490TM Manufacturer: Teknik Makina Compatible inserts: LNGX 1307 Compatible insert manufacturer: Walter Torx screw: M4x10 Torx key: T15 Numbers / Core technical data Head diameter: 50 mm Shank diameter: 22 mm Overall length: 45 mm Weight: 0.425 kg Cutting angle: 90° Cutting edges: 4 Designs / Special features For LNGX 1307 indexable inserts Walter-compatible insert fit Torx M4x10 clamping screw T15 drive key required Compact 45 mm overall length Ø50 mm head for stability FAQ Is this turning head compatible with Walter inserts? The Teknik Makina corner tool head T490TM is designed to accept LNGX 1307 indexable inserts and is specified as compatible with Walter-style inserts. Which drive size is required to tighten the clamping screw? The clamping screw is an M4x10 Torx type and requires a T15 key for secure tightening. What cutting geometry is provided by the head? The tool head offers a 90° cutting angle, making it suitable for shoulder cuts and square-off turning operations. How many cutting edges can be indexed before a replacment is needed? The head supports inserts with four cutting edges, enabling multiple indexings to extend productive life before replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Indexable Turning Head 90° For LNMT 0804 Indexable Inserts, 7 Cutting Edges, 40mm Overall Length - Teknik Makina
Taking advantage of a compact 50 mm head and a 90° cutting angle delivers consistent shoulder quality while the Torx M2.5x7 fastening ensures repeatable clamping and minimal downtime. Order the tool directly via Metav Werkzeuge or consult our technical advisors for application-specific setup. Eckmesserkopf — 90° corner turning head for LNMT 0804 indexable inserts (Teknik Makina) An Eckmesserkopf designed for precision shoulder and corner turning with LNMT 0804 indexable inserts, offering compact dimensions and robust clamping for production environments 90° cutting angle for precise shoulder turning Compatible with LNMT 0804 indexable inserts 50 mm head diameter, compact 40 mm length Torx M2.5x7 fastening, T8 key required Consistent shoulder quality through defined geometry The head’s 90° cutting angle and compatibility with indexable inserts such as the LNMT 0804 ensure predictable, reproducible shoulder finishes on turning applications. This geometry reduces the need for secondary operations by producing clean faces and square shoulders on parts, which translates into faster cycle times and less rework. For production shops seeking to standardise results, the defined tool geometry contributes to lower scrap rates and steadier process capability. Space-saving design that reduces interference and setup time With a 50 mm diameter and an overall length of 40 mm, the compact construction reduces tool overhang and the risk of collisions in multi-tool turrets. The 22 mm shank diameter provides a secure fit in common holders while keeping the cutting head compact, which is beneficial when working in confined fixtures or close to steady rests. Reduced mass and compact geometry help to improve dynamic stability, which supports higher feed rates and more consistent surface quality. Secure fastening for repeatable performance and maintenance ease Clamping is accomplished with a Torx M2.5x7 screw and requires a T8 key, a combination chosen to deliver reliable torque transmission and consistent insert seating. Robust fastening reduces micro-movement at the insert seat, limiting vibration and helping to extend insert life. The straightforward screw design shortens changeover times during tool replacement, improving uptime and simplifying routine maintenance in busy production environments. Industrial compatibility and streamlined procurement Designed for use with LNMT 0804 indexable inserts and compatible with ISCAR standards, this turning head suits mixed-machine shops and OEM production lines that need interchangeability across brands. The product is supplied under SKU T223TM by Teknik Makina and engineered for repeatable positioning in standard tool posts. If selection between similar tool heads is uncertain, Metav Werkzeuge acts as a single-source partner for precision tooling and can advise on the best insert grades and clamping settings for the intended material and cutting conditions. For technical queries or specification sheets, contact Metav Werkzeuge by email or phone for rapid advice. For reliable corner turning solutions, contact Metav Werkzeuge to discuss the Teknik Makina Eckmesserkopf T223TM and matching LNMT 0804 inserts for an optimised setup Technical data Article number: T223TM Manufacturer: Teknik Makina Name: Eckmesserkopf Compatible with: LNMT 0804 indexable inserts Compatible insert brands: ISCAR Fastening screw: Torx M2.5x7 Fastening key: T8 Data Diameter: 50 mm Overall length: 40 mm Shank diameter: 22 mm Weight: 0.374 kg Cutting angle: 90° Cutting edges: 7 Special features For LNMT 0804 indexable inserts 90° shoulder/corner turning geometry Torx clamping for repeatable seating Compact head for reduced tool overhang FAQ What inserts fit this turning head? The turning head accepts LNMT 0804 indexable inserts; it is specified for those plate formats and is compatible with ISCAR-style LNMT 0804 inserts. What is the head diameter and how does it affect stability? The head diameter is 50 mm, a compact size that reduces overhang and improves dynamic stability for more consistent results in shoulder turning. Which fastening screw and key are required for insert changes? Insert clamping uses a Torx M2.5x7 screw and requires a T8 key for secure and repeatable fastening. Is this head suitable for heavy-duty production runs? Yes, the design and secure Torx fastening provide repeatable seating and vibration resistance suitable for series production when used with the appropriate insert grade. What are the product identifiers for ordering and specification? The product is listed as SKU T223TM from Teknik Makina and is described as an Eckmesserkopf for LNMT 0804 indexable inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Indexable Turning Head for 90° WNGX 0403, 22mm Shank, M2.5x5.5 Torx Screw - Teknik Makina
Combine robust clamping with a true 90° cutting geometry and Korloy WNGX 0806 compatibility for repeatable shoulder turning; order directly via Metav Werkzeuge or contact our consultants for application advice. Corner tool head T693TM — 90° indexable insert holder with 22 mm shank (Teknik Makina) Corner tool head T693TM is a 90° indexable insert holder engineered for precise shoulder turning and facing, compatible with Korloy WNGX 0806 inserts and designed for secure clamping in toolposts with a 22 mm shank. 90° cutting angle for precise shoulder turning Compatible with WNGX 0806 Korloy inserts 22 mm shank for secure toolpost clamping Torx T8 screw (M2.5x5.5) for quick insert change Deliver repeatable 90° shoulders and tighter tolerances The 90° cutting angle ensures consistent shoulder geometry on serial parts, reducing manual rework and inspection time. Compatibility with WNGX 0806 indexable inserts provides a well-known insert form factor that simplifies stocking and replacement. With eight effective cutting edges the design supports efficient indexing, so changeovers become predictable and downtimes are minimised. This combination of geometry and insert ecosystem translates directly into higher first-pass yield and process stability for turning and facing operations. Fast insert changes and reliable clamping for reduced downtime Engineered for practical workshop use, the head secures inserts with a Torx T8 drive and an M2.5x5.5 screw, enabling repeatable tightening torque and straightforward service routines. The simple fasten-and-index principle means insert replacement is rapid and repeatable, lowering non-productive time between jobs. Clear mechanical fixation supports stable cutting conditions, which in turn reduces tool wear variability and helps maintain surface finish quality across production runs. Stable toolholding for improved surface finish and process security A 22 mm shank provides a rigid connection to the toolpost, countering vibration and improving chip control during shoulder operations. The tool head’s overall dimensions — a 50 mm diameter and a 40 mm overall height — contribute to stiffness in the clamped state and predictable tool overhang. Reduced chatter and improved heat distribution extend insert life and produce more consistent component surfaces, which benefits downstream assembly and inspection steps. Optimised for workshop supply and industrial reliability Offered by Teknik Makina and stocked through Metav, this tool head complements a pragmatic inventory strategy: familiar insert types, standardised fixing hardware and robust toolholder geometry. Metav Werkzeuge acts as a quality filter for the European market, ensuring dependable availability and expert advice from Emmerich. For production planners and workshop managers the combination of widespread insert compatibility and straightforward mounting lowers stocking complexity and supports smoother production planning. For dependable 90° shoulder turning with Korloy WNGX 0806 inserts, contact Metav Werkzeuge in Emmerich to discuss specifications and availability: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: T693TM Manufacturer: Teknik Makina Suitable for inserts: WNGX 0806 Compatible insert manufacturer: Korloy Torx key: T8 Torx screw: M2.5x5.5 Shank diameter (d): 22 mm Core data Shank diameter: 22 mm Cutting angle: 90° Diameter: 50 mm Overall height: 40 mm Cutting edges: 8 Special features Indexable insert holder for 90° shoulder turning Designed for Korloy WNGX 0806 inserts Secure Torx fixation for repeatable torque Robust shank for vibration reduction FAQ Which insert type fits this holder? The holder is designed for WNGX 0806 indexable inserts; Korloy-compatible sizes are specified for secure seating and reliable cutting performance with the T693TM tool head. What shank size is required for mounting? The tool head uses a 22 mm shank diameter, suitable for toolposts or holders that accept a 22 mm tool shank for stable clamping. How is the insert fastened and which key is needed? Inserts are secured with an M2.5x5.5 screw tightened using a Torx T8 key to achieve consistent clamping and straightforward insert changes on the T693TM. Is the T693TM suitable for finishing passes? Yes — the 90° geometry and stable toolholding reduce vibration and support finer feeds and depths for improved surface finish when finishing shoulders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Indexable Turning Head for ANHX 1206 Inserts, 90° Cutting Angle, 22mm Shank - Teknik Makina
Take advantage of the combination of a compact 22 mm shank and a rigid Ø50 mm head with a 90° cutting angle for consistent shoulder turning and stable mounting; order the tool directly via Metav Werkzeuge or consult our specialists for integration advice. Corner turning head T642TM — for ANHX 1206 indexable inserts, Ø50 mm head, 90° cutting angle (Teknik Makina) Corner turning head T642TM is a compact, CNC-compatible tool head optimised for precise external turning and profiling with ANHX 1206 indexable inserts in industrial lathe applications. Compatible with ANHX 1206 indexable inserts Rigid Ø50 mm head for high stability 22 mm shank for secure mounting 90° cutting angle for accurate shoulder profiles Secure mounting and repeatable positioning for production stability The robust 22 mm shank and compact geometry deliver a stable connection to the toolpost, reducing run-out and vibration during machining. Retention is ensured by a Torx M3.5x8.5 fixing screw operated with a T15 key, enabling reliable clamping force and simplified replacement of the insert. With a mass of 0.375 kg, the assembly maintains favourable dynamic behaviour at lathe spindle speeds while providing the inertia required for consistent cutting. The model T642TM is dimensioned for repeatable set-ups, which reduces rework and shortens machine downtime. Precise 90° profiling with ANHX 1206 inserts for accurate shoulders A dedicated 90° cutting angle makes this head particularly effective for shoulder turning and form-facing where right-angle geometry is critical. It accepts ANHX 1206 indexable inserts (compatible with Palbit variants), allowing a choice of grades and geometries tailored to workpiece material and cutting data. The Ø50 mm head increases stiffness at the cutting point, helping to maintain surface finish and dimensional accuracy while extending insert life. For shops seeking predictable cycle times and consistent part quality, this geometry translates into measurable process reliability. Compact design for easy integration and low-maintenance operation With a 40 mm overall length, the head is designed to fit tight toolpost arrangements and to minimise overhang, which helps reduce deflection in long-reach setups. The simple Torx screw retention and standardised insert interface make routine servicing straightforward: inserts can be changed quickly, and the limited number of service operations helps keep maintenance predictable. The compact form factor supports flexible fixture layouts in multi-tool turrets or quick-change systems, facilitating short set-up and changeover times without compromising rigidity. For enhanced rigidity and precise 90° profiling, request supply and technical advice from Metav Werkzeuge — Metav Werkzeuge’s specialists in Emmerich are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss application-specific data and compatibility Technical data Article number: T642TM Manufacturer: Teknik Makina Product name: Eckmesserkopf Application: for ANHX 1206 Indexable Inserts eClass: 21181015 Facts Diameter: 50 mm Shank diameter: 22 mm Overall length: 40 mm Weight: 0.375 kg Cutting angle: 90° Cutting edges: 5 Special features Compatible with ANHX 1206 indexable inserts Compatible insert manufacturer: Palbit Torx screw: M3,5x8,5 Torx key size: T15 SKU / UID: T642TM FAQ What inserts fit this tool head? The T642TM accepts ANHX 1206 indexable inserts; variants from Palbit are compatible and commonly used for a range of materials. Which shank size is required for mounting? Mounting is designed for a 22 mm shank diameter to ensure secure fastening and accurate alignment in standard toolposts. Is the head suitable for shoulder turning on hardened materials? The 90° geometry and the rigid Ø50 mm head provide good stability for shoulder turning; insert grade selection should be matched to the specific hardness and application. How is the insert secured and changed? Inserts are secured with a Torx M3.5x8.5 screw operated with a T15 key, allowing quick and repeatable insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Indexable Turning Head For LNXT 1306 Inserts 90° Cutting Angle M4x10 Torque Screw, 22mm Shank - Teknik Makina
Take advantage of a robust combination of precision and compatibility: the 90° cutting geometry and compatibility with LNXT 1306 indexable inserts ensure consistent shoulder turning and reduced set-up time; the 22 mm shank provides secure mounting for uninterrupted production. Order the tool through Metav Werkzeuge or consult our specialists for integration advice. Corner cutting head T673TM – 90° cutting head for LNXT 1306 indexable inserts (Teknik Makina) The Corner cutting head T673TM is a compact turning head designed for square-shoulder and finishing operations using LNXT 1306 indexable inserts, suitable for standard lathes and CNC turrets 90° cutting angle for square shoulder turning Compatible with LNXT 1306 indexable inserts 22 mm shank diameter for secure mounting Torx M4x10 screw; T15 tightening key required Accurate compatibility for predictable results The turning head is engineered for consistent interchangeability with LNXT 1306 insert geometry from Palbit, which reduces downtime caused by trial-and-error setup. The controlled 90° cutting angle produces clean shoulders and right-angle features without secondary operations, translating into fewer machine cycles and higher first-pass yield. For teams prioritising throughput, the combination of standard indexable inserts and a dedicated holder delivers straightforward tool replacement and consistent cutting geometry, allowing process engineers to plan feeds and speeds with confidence. Secure clamping and repeatable set-up for stable machining This tool head accepts a 22 mm mounting interface, giving a rigid connection to the turret or tool post and lowering vibration during cutting. With a head diameter 50 mm, total length 40 mm and a compact mass of 0.358 kg, the assembly balances stiffness and accessibility in close-quarter operations. Fastening uses a Torx M4x10 screw secured with a T15 key, ensuring repeatable torque and minimised loosening under load. The result is a secure, serviceable holder that makes tool changes faster and repeatable setups simpler to document in quality checks. Practical productivity and workshop integration Equipped to accept inserts with 5 cutting edges, the head supports economical insert indexing and extended tool life, which improves cost per component in medium-to-high batch runs. Manufactured to Teknik Makina tolerances, the unit integrates with standard tool inventories to reduce special-order parts and keep spares at hand. Coupled with Metav’s distribution and quality filter in Emmerich, this solution supports reliable supply and predictable lead times, helping production planners maintain steady throughput and minimise inventory complexity. For reliable corner turning with Teknik Makina precision, contact Metav Werkzeuge for procurement guidance and application support: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: T673TM Manufacturer: Teknik Makina Product: Corner cutting head for LNXT 1306 Indexable Inserts Numbers / Core technical data Head diameter: 50 mm Shank / holding diameter: 22 mm Total length: 40 mm Cutting angle: 90° Number of cutting edges: 5 Weight: 0.358 kg Special features or Versions Compatible inserts: LNXT 1306 Compatible insert manufacturer: Palbit Fastening: Torx screw M4x10 Torx key size: T15 SKU: T673TM FAQ Is this head compatible with Palbit LNXT 1306 inserts? Yes. The corner cutting head is designed specifically for LNXT 1306 indexable inserts and matches Palbit insert geometry. What mounting interface is required for installation? The tool requires a 22 mm shank/holding diameter; the design ensures a rigid connection for stable cutting. What cutting angle does the head provide and what is it used for? The head features a 90° cutting angle, ideal for square-shoulder turning and finishing right-angle features. Which fastening hardware is supplied or required? Fastening uses a Torx M4x10 screw tightened with a T15 key for repeatable clamping torque. How many cutting edges can be used before index change? The insert arrangement accepts tools rated with 5 cutting edges, enabling multiple indexing positions before replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Indexable Turning Head For VCGT 1604 Inserts 90° Cutting Angle, M4x10 Torx T15 - Teknik Makina
Take advantage of a precise, compact holder that combines secure clamping with wide compatibility: the design supports VCGT 1604 indexable inserts, a 22 mm shank for rigid mounting and a 90° cutting angle for dependable corner turning; order the corner turning head directly via Metav Werkzeuge or consult our specialists for application advice. Corner turning head T500TM — Indexable insert holder, Ø50 mm head, for VCGT 1604 inserts (Teknik Makina) A compact corner turning head designed to accept VCGT 1604 indexable inserts, engineered for tight turning applications and stable toolholding. Ø50 mm head for tight access Compatible with VCGT 1604 indexable inserts 22 mm shank diameter for secure mounting Torx M4x10 screw, T15 key specification Faster set-ups through compact, rigid design The compact head diameter and short overall length reduce interference in confined toolpost layouts while maintaining a stable cutting position. The Ø50 mm head and 52 mm overall length permit close access to workpiece shoulders, and the 22 mm shank diameter is specified to deliver repeatable clamping stiffness. These dimensional choices translate into reduced vibration and more consistent surface finish, so cycle times are often shorter and rework risk is minimised. The component weight of 0.362 kg keeps the rotating mass low, which supports dynamic balance in common turning machines. Reliable clamping and straightforward insert compatibility The holder is designed specifically for VCGT 1604 inserts, which are widely used for general turning and finishing operations; the format guarantees easy indexing and the benefit of multiple cutting edges per insert. The clamping screw is a Torx M4x10, compatible with a T15 key, which enables secure fixation with a controlled torque application. Because the fastening interface uses a Torx drive, the screw is resistant to cam‑out and allows for precise torque transfer; this characteristic is especially useful when consistent clamping force is required across tool changes, ensuring insert stability and extending insert life. Practical benefits for workshop workflows and toolroom stock Engineered as a direct and practical solution for small to medium turning tasks, the tool head integrates with standard toolholders where a 22 mm shank is accepted. The 90° cutting angle is suitable for corner machining and facing operations where perpendicular tool entry is required, which reduces the need for multiple specialised holders. As a spare or replacement item, this head supports streamlined inventory management: a single, robust holder that fits a common insert size reduces the variety of stocked items without compromising process flexibility. For purchasers seeking reliable supply and European distribution, Metav Werkzeuge offers consistent availability and logistics from its Emmerich hub. Choose the Teknik Cutting Tools T500TM for dependable corner turning performance and contact Metav Werkzeuge to confirm compatibility with existing toolposts and arrange timely delivery from Emmerich Technical data Article number: T500TM Manufacturer: Teknik Makina Measurements Head diameter: 50 mm Shank diameter: 22 mm Overall length: 52 mm Weight: 0.362 kg Cutting angle: 90° Features & compatibility Compatible with VCGT 1604 indexable inserts Torx screw M4x10 Torx key specification T15 Four cutting edges arrangement FAQ Which inserts fit this holder? The holder accepts VCGT 1604 indexable inserts; the geometry is matched to standard VCGT pockets for secure seating and reliable indexing. What shank size is required in the toolpost? A toolpost accepting a 22 mm shank is required; the shaft diameter is specified as 22 mm for rigid mounting. Which screw and key are specified for clamping? Clamping is carried out with a Torx M4x10 screw; the corresponding drive size is T15 for torque application. Is the tool suitable for corner and facing operations? Yes — the 90° cutting angle and compact head profile are designed for corner turning and facing where perpendicular entry and close access are required. How does the weight affect machine dynamics? With a mass of 0.362 kg, the head keeps rotating mass low, supporting balance and reducing vibration in typical lathe operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Indexable Turning Tool Holder for SPMT 1204 Inserts, 22mm Shank, 4 Cutting Edges - Teknik Makina
Benefit from the combination of a compact 50 mm head, secure Torx M5x12 clamping and direct compatibility with SPMT 1204 indexable inserts for stable, low-vibration turning; order the component directly via Metav Werkzeuge or consult the advisers for fitment and delivery. Eckmesserkopf Corner Tool Head by Teknik Makina — 50 mm diameter, 22 mm shank The Eckmesserkopf Corner Tool Head for SPMT 1204 indexable inserts is a compact turning head designed for precise external machining in confined or short-overhang setups. Compact 50 mm diameter head Accepts SPMT 1204 indexable inserts 22 mm shank for common toolholders Secure Torx M5x12 clamping Stable cutting performance for short overhangs The turning head delivers consistent results in operations where rigidity matters. Designed for use with SPMT 1204 inserts and featuring 4 cutting edges, the geometry reduces chatter and supports improved surface finish. The 50 mm head diameter and 22 mm shank create a compact package that shortens the unsupported length, which in turn lowers deflection and allows higher feed rates without sacrificing accuracy. Explained plainly: a shorter overhang equals steadier cuts and less rework. Simple assembly and quick insert changes Assembly and maintenance are kept straightforward to reduce downtime. Insert retention is secured by a Torx M5x12 screw using a T20 key, enabling controlled clamping torque and repeatable seating of the insert. At a weight of 0.362 kg, the head is easy to handle during set-up yet substantial enough to provide stability during machining. The fast-change nature of indexable inserts means the toolholder can be returned to production swiftly after a tool change, improving overall shop throughput. Ready for reliable workshop integration Built to integrate with standard tooling systems, this corner turning head supports consistent process integration on conventional lathes and CNC turning centres. Compatibility with SPMT 1204 indexable inserts ensures access to a wide range of grades for different materials and cutting conditions. Supplied by Teknik Cutting Tools and available through Metav Werkzeuge, the component benefits from dependable availability and a traceable supply chain, supporting long-term production planning and spare-part stocking. Contact Metav Werkzeuge for tailored advice on workplace integration and to request the Teknik Makina Eckmesserkopf (SKU T650TM) compatible with SPMT 1204 inserts for immediate inclusion in the toolroom inventory Technical Data Article number: T650TM Brand: Teknik Makina For indexable inserts: SPMT 1204 Torx screw: M5x12 Facts Diameter: 50 mm Overall length: 40 mm Shank diameter: 22 mm Cutting edges: 4 Weight: 0.362 kg Special features For SPMT 1204 indexable inserts Torx key size: T20 Compact design for short overhangs FAQ How is the insert secured in the head? The insert is fastened with a Torx M5x12 screw; the design of the Eckmesserkopf ensures repeatable seating and secure clamping for SPMT 1204 inserts. Which shank diameter is required for mounting? The head uses a 22 mm shank, compatible with toolholders that accept a 22 mm diameter mounting interface. What are the primary benefits of this turning head? The corner tool head provides reduced vibration through a compact 50 mm diameter, accepts SPMT 1204 indexable inserts and supports fast insert changes, improving process stability and uptime. What is the product identifier for ordering or spare parts? Order or reference SKU T650TM for the Teknik Makina Eckmesserkopf when enquiring about availability or replacements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Planing Cutter Head 45° For SNKX 1206 And ONHX 0505 Indexable Inserts, 4 Cutting Edges, 40mm Overall Length - Teknik Makina
Benefit from a combination of precise 45° cutting geometry, a compact 22 mm shank and four cutting edges for consistent surface finish and reduced tool-change frequency; order the tool directly via Metav Werkzeuge or consult our specialists for matching inserts and mounting advice. Planing Head T623TM — 45° for SNKX 1206 Indexable Inserts by Teknik Makina The Planing Head T623TM is a 45° cutter head engineered for SNKX 1206 and ONHX 0505 indexable inserts, intended for reliable face planning and finish operations in workshop and production environments 45° cutting angle for smooth face planning 50 mm diameter for stable cutting performance 22 mm shank for secure toolholder fit Four cutting edges for consistent material removal Precision and productivity in face planning The 45° geometry delivers a balanced mix of entry clearance and axial engagement, which results in a smoother surface finish and steady cutting forces. Thanks to the four cutting edges, downtime for index changes is minimised and cycle times are stabilised, supporting continuous production. The combination of angled cutting and multiple edges yields a practical increase in effective tool life while maintaining predictable performance across repetitive operations. Robust construction and straightforward compatibility Engineered for secure mounting, the cutter features a 22 mm shank and a 50 mm diameter body with a 40 mm overall length, which together ensure concentricity and mechanical stability in standard toolholders. Inserts are secured with an M4x10 Torx screw and require a T15 Torx key, allowing quick, repeatable insert changes. Compatibility is established for SNKX 1206 inserts and also for ONHX 0505 (Palbit) types, enabling straightforward integration into existing insert stocks and simplifying procurement and logistics. Efficient handling and workshop integration At a mass of 0.458 kg the cutter head balances rigidity with manageable handling during tool set-up. The compact form factor eases storage and tool magazine planning, while the indexed insert system reduces inventory variety per cutting edge. Clear technical features and standardised fastening mean maintenance routines remain simple, helping to keep the production line predictable and enabling informed planning of changeover intervals and spare parts procurement. For reliable face planning with Teknik Cutting Tools' Planing Head T623TM, contact Metav Werkzeuge in Emmerich for tailored advice, availability and fast dispatch — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: T623TM Name: Planing head For inserts: SNKX 1206; ONHX 0505 Indexable Inserts Brand: Teknik Makina Dimensions & weight Diameter: 50 mm Overall length: 40 mm Shank diameter: 22 mm Weight: 0.458 kg Cutting angle: 45° Assembly & compatibility Cutting edges: 4 Torx screw: M4x10 Torx key size: T15 Compatible insert manufacturer: Palbit Alternate insert reference: ONHX 0505 Palbit FAQ What insert types fit this cutter head? The cutter accepts SNKX 1206 inserts and is also compatible with ONHX 0505 (Palbit) types, allowing use of commonly stocked Palbit grades. Which fastening hardware is required for insert changes? Inserts are secured with an M4x10 Torx screw; a T15 Torx key is required for installation and removal. What are the key dimensions relevant for toolholder selection? Relevant dimensions include a 50 mm diameter, 40 mm overall length, and a 22 mm shank diameter for secure clamping. How many cutting edges are available before an index change is needed? The head holds four cutting edges, offering multiple indexed positions to extend service intervals between full insert replacements. Is the tool heavy to handle during setup? The head weighs 0.458 kg, a compact mass that supports precise mounting while remaining easy to handle during tool changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Planing Cutter Head For LNMU 0303 Indexable Inserts, 7 Cutting Edges, 22mm Shank - Teknik Makina
Take advantage of a compact face‑milling solution that combines a Ø 50 mm cutting head, a 22 mm shank for secure mounting and compatibility with LNMU 0303 indexable inserts — order directly via Metav Werkzeuge or consult the specialists for application advice. Planmesserkopf — Face‑milling head for LNMU 0303 indexable inserts (Teknik Makina) The Planmesserkopf is a precision face‑milling head engineered for use with LNMU 0303 indexable inserts, offering a compact Ø 50 mm head and a rigid 22 mm mounting for stable finishing operations. Ø 50 mm cutting head 22 mm shank for secure mounting Compatible with LNMU 0303 inserts Torx T8 fixing; M2.5×7 screw Stable mounting for consistent surface quality A compact head diameter paired with a 22 mm shank provides high clamping rigidity and reduced vibration during cutting, which supports reliable surface finishes. The smaller diameter is advantageous when space is limited or when access to narrow faces is required; combined with a secure mounting interface, it improves process stability and reduces the likelihood of chatter. The result is more repeatable cycle times and a measurable improvement in part quality when using indexable inserts in production environments. Efficient insert interface reduces downtime The milling head is specified for LNMU 0303 indexable inserts and accepts the TNGLY‑OKE grade, enabling quick index changes and predictable cutting geometry. A total of 7 cutting edges on the tool body indicate the designed cutting positions or engagements that contribute to productive material removal in finishing passes. The Torx‑type fixing with Torx T8 and an M2.5×7 screw ensures fast, tool‑centric clamp actions that simplify maintenance and shorten tool change intervals, supporting higher machine utilisation. Compact design for flexible workshop use With an overall height of 50 mm and a head diameter of 50 mm, this face‑milling solution was conceived for versatile shopfloor deployment where tool clearance and accessibility are critical. The compact dimensions make it suitable for smaller milling machines or multi‑axis cells where envelope constraints apply. Built to integrate with standard insert geometries, it allows procurement teams to standardise inserts across families, reducing inventory complexity while maintaining the cutting performance expected in industrial settings. For precise face‑milling with Teknik Cutting Tools' head, contact Metav Werkzeuge for ordering and technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T729TM Product: Planmesserkopf for LNMU 0303 indexable inserts Manufacturer: Teknik Makina Core dimensions Head diameter: 50 mm Overall height: 50 mm Shank diameter: 22 mm Number of cutting edges: 7 Torx key: T8 Torx screw: M2.5×7 Compatibility & features For LNMU 0303 indexable inserts Compatible inserts: TNGLY‑OKE Mounting interface suitable for 22 mm tool holders FAQ Which inserts fit this milling head? The Planmesserkopf is designed for LNMU 0303 indexable inserts and is compatible with the TNGLY‑OKE insert designation supplied for this head. What is the shank diameter and why does it matter? The shank diameter is 22 mm; this dimension provides a rigid mounting in the tool holder and contributes to reduced vibration and improved surface finish when machining. Is the Torx fastening standardised for quick changes? Yes, the head uses a Torx T8 fixing with an M2.5×7 screw to allow secure and repeatable clamp actions during insert replacement. Can this head be used in compact milling machines? The compact Ø 50 mm head and 50 mm overall height make it well suited for machines with limited tool envelope and for applications requiring close access to workpiece faces. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Planmesserkopf SNKX 1206 L44mm Innenkühlung 4 Schneiden Torx T15 M4x12,5 - Teknik Makina
Planmesserkopf für SNKX 1206 Wendeplatten Planmesserkopf für präzise Planbearbeitung in der Zerspanung, geeignet für SNKX 1206 Wendeschneidplatten und ausgelegt auf stabile Oberflächenqualität 50 mm Durchmesser für kompakte Bearbeitung Innenkühlung für gezielte Kühlschmierstoffzufuhr Kompatibel mit SNKX 1206 Wendeplatten 4 Schneiden für gleichmäßige Oberflächen Montage mit Torx Schraube M4x12,5, Schlüssel T15 Präzision durch geometrische Stabilität Der Planmesserkopf überzeugt durch eine robuste Geometrie und den Schnittwinkel 45°, der eine gleichmäßige Schnittkraftverteilung sicherstellt. Mit einem maximalen Schneidendurchmesser von 63 mm und 4 Schneiden werden Oberflächen schneller homogeniert, was Nachbearbeitung reduziert. Die kompakte Bauform mit einem Außendurchmesser von 50 mm und einer Gesamtlänge von 44 mm erlaubt den Einsatz in beengten Aufspannsituationen, ohne die Stabilität zu beeinträchtigen. Innenkühlung für Standzeit und Prozesssicherheit Die integrierte Innenkühlung führt Kühlschmierstoff direkt an die Schneidzone und verbessert die Spanabfuhr sowie die Wärmeabfuhr an der Schneide. Das Ergebnis sind geringere thermische Belastungen an den Wendeplatten und verlängerte Standzeiten. Die gezielte Kühlschmierstoffzufuhr unterstützt konstante Schnittbedingungen und reduziert Werkzeugwechselintervalle, wodurch die Produktivität in Mehrschichtbetrieb steigt. Passgenaue Kompatibilität und einfache Montage Dieses Werkzeug ist speziell ausgelegt für SNKX 1206 Wendeplatten und eignet sich explizit für Wendeplatten des Herstellers Korloy, wodurch die Auswahl und Beschaffung von Einlegplatten vereinfacht wird. Die Befestigung erfolgt mit der Torx Schraube M4x12,5; zur Montage wird der Torx Schlüssel T15 verwendet, was schnellen und reproduzierbaren Wechsel bei geringem Aufwand ermöglicht. Die präzise Aufnahme sorgt für zuverlässige Wiederholgenauigkeit beim Wechsel der Wendeplatten. Produktnutzen für Fertigung und Werkstatt In der Serienfertigung sorgt der Planmesserkopf für stabile Bearbeitungsprozesse, weniger Stillstandzeiten und planbare Werkzeugkosten. Durch die Kombination aus kompakter Bauweise, Innenkühlung und kompatibler Plattenaufnahme lassen sich Zykluszeiten optimieren und Oberflächengüten ohne Mehraufwand erzielen. Das Werkzeug unterstützt sowohl grobe Planbearbeitung als auch feinere Schlichtoperationen, je nach eingesetzter Schneidplatte und Schnittdaten. Für hochwertige Planbearbeitung empfehlen wir den Planmesserkopf von Teknik Makina – bei Fragen oder für eine fachkundige Beratung erreichen Sie Metav Werkzeuge per eMail: info@metav-werkzeuge.com oder telefonisch: +49 2822 7131930. Produktmerkmale Artikelnummer: T320-1TM Marke: Teknik Makina Bezeichnung: Planmesserkopf für SNKX 1206 Wendeplatten Fakten Durchmesser: 50 mm Gesamtlänge: 44 mm Schneiden: 4 Schneidendurchmesser (D max): 63 mm Schnittwinkel: 45° Gewicht: 0,593 kg Besonderheiten Innenkühlung: Ja, zielgerichtete Kühlschmierstoffzufuhr Passend für Wendeplattenhersteller: Korloy Wendeplatten: SNKX 1206 Torx Schraube: M4x12,5 Torx Schlüssel: T15 SKU: T320-1TM FAQ Welche Wendeplatten passen auf den Planmesserkopf? Der Planmesserkopf ist ausgelegt für SNKX 1206 Wendeplatten und wurde hinsichtlich Sitz und Aufnahmegeometrie entsprechend angepasst; er eignet sich insbesondere für Platten von Korloy. Wie unterstützt die Innenkühlung die Werkzeugleistung? Die Innenkühlung des Planmesserkopfs führt Kühlschmierstoff direkt zur Schneidkante, verbessert Spanabfuhr und Wärmeabfuhr und trägt so zu längeren Standzeiten und konstanteren Schnittbedingungen bei. Welche Befestigungsteile werden benötigt? Zur Montage wird die Torx Schraube M4x12,5 verwendet; empfohlen wird der Torx Schlüssel T15 für sicheren und schnellen Plattenwechsel. Eignet sich das Werkzeug für enge Aufspannverhältnisse? Ja, dank des kompakten Außendurchmessers von 50 mm und der Gesamtlänge von 44 mm ist der Planmesserkopf für beengte Einbausituationen konzipiert und ermöglicht dennoch stabile Bearbeitungsbedingungen. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Planmesserkopf SNMU 1305 L44mm Innenkühlung, 4 Schneiden, Torx M5x12 - Teknik Makina
Planmesserkopf für SNMU 1305 Wendeplatten von Teknik Makina Planmesserkopf für präzise Planbearbeitung und Aufnahme von SNMU 1305 Wendeplatten, konzipiert für robuste Zerspanungsaufgaben in der Serienfertigung 50 mm Durchmesser für stabile Planbearbeitung 4 Schneiden für gleichmäßigen Spanabtrag Innenkühlung für verbesserte Werkzeugkühlung Kompatibel mit SNMU 1305 Wendeplatten Befestigung mit M5x12 Torx Schraube Präzise Konstruktion für kontinuierlichen Einsatz Der Planmesserkopf überzeugt durch einen optimierten Aufbau mit 50 mm Durchmesser und vier Schneiden, die gleichmäßigen Spanabtrag und konstante Oberflächenqualität sicherstellen. Der begrenzte Schnittwinkel von 45° reduziert Schnittkräfte und sorgt für ruhigen Lauf an der Maschine. Durch die robuste Bauweise wird die Standzeit der Wendeplatten gefördert, was zu planbaren Rüst- und Produktionszyklen führt. Kompatibilität mit SNMU 1305 und Herstellerhinweis Das Werkzeug ist für SNMU 1305 Wendeplatten ausgelegt und eignet sich speziell für Wendeplatten des Herstellers ISCAR, wodurch ein flexibler Einsatz mit gängigen Wendplattenoptionen möglich ist. Diese Kompatibilität ermöglicht den Einsatz bewährter Schneidstoffe und Beschichtungen der Wendeplatten, was die Prozesssicherheit in der Fertigung erhöht. Innenkühlung zur Temperaturkontrolle und Spanabfuhr Die integrierte Innenkühlung führt Kühlschmierstoff direkt an die Schneidzone und reduziert thermische Belastung und Werkzeugverschleiß. Durch die gezielte Kühlung verbessert sich die Spanabfuhr, was besonders bei Serienbearbeitung und höheren Schnittwerten zu konstanteren Ergebnissen führt. Ein weiterer Vorteil ist die Reduzierung von Nachbearbeitungsaufwand dank stabilerer Schnittbedingungen. Montage und sichere Befestigung Die Montage erfolgt mit der M5x12 Torx Schraube; der passende Torx Schlüssel T20 wird für sicheres Anziehen empfohlen. Die klare Schraubengeometrie sorgt für einfache Wechsel der Wendeplatten und minimiert Rüstzeiten. Regelmäßige Sichtprüfung der Schrauben und Wendeplatten verlängert die Lebensdauer und erhält konstante Bearbeitungsqualität. Empfehlung: Der Planmesserkopf ist optimal geeignet für ISCAR SNMU 1305 Wendeplatten; für Verfügbarkeit und technische Beratung Metav Werkzeuge kontaktieren oder direkt über Metav Werkzeuge anfragen. Produktmerkmale Artikelnummer: T234-1TM Marke: Teknik Makina Bezeichnung: Planmesserkopf für SNMU 1305 Wendeplatten Produktart: Planmesserkopf Daten Durchmesser: 50 mm Gesamtlänge: 44 mm Schneidendurchmesser max: 63 mm Schneiden: 4 Schnittwinkel: 45° Besonderheiten Innenkühlung: Ja Kompatibilität: SNMU 1305 Wendeplatten (passt für ISCAR) Torx Schlüssel: T20 Torx Schraube: M5x12 SKU: T234-1TM Gewicht: 0,481 kg FAQ Kann der Planmesserkopf mit anderen Wendeplatten als SNMU 1305 verwendet werden? Der Planmesserkopf wurde für SNMU 1305 Wendeplatten konzipiert; alternative Größen oder Geometrien erfordern Prüfungen der Passform und sind nicht ohne weiteres gewährleistet. Welche Vorteile bietet die Innenkühlung bei diesem Planmesserkopf? Die Innenkühlung des Planmesserkopfes reduziert die Temperatur in der Schneidzone, verbessert die Spanabfuhr und verlängert dadurch die Standzeit der Wendeplatten. Welche Schrauben und Werkzeuge werden für den Wechsel der Wendeplatten benötigt? Für den sicheren Wechsel werden die M5x12 Torx Schraube und ein Torx Schlüssel T20 empfohlen; diese Kombination gewährleistet stabilen Sitz und einfache Handhabung. Ist der Planmesserkopf von Teknik Makina für Hochleistungsanwendungen geeignet? Der Planmesserkopf von Teknik Makina bietet mit vier Schneiden und optimiertem Schnittwinkel hohe Prozessstabilität und eignet sich für anspruchsvolle Planbearbeitungen, insbesondere in Serienprozessen. Wie erkenne ich die Kompatibilität mit Wendeplatten eines bestimmten Herstellers? Die Ausführung T234-1TM ist explizit kompatibel mit SNMU 1305 Wendeplatten und wurde auf Nutzung mit Wendeplatten des Herstellers ISCAR abgestimmt; für abweichende Systeme bitte technische Daten vergleichen. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Planflächen schneller und präziser herstellen
Planfräser, auch als Planfräswerkzeug oder Stirnplanfräser bezeichnet, sind meist mit Wendeschneidplatten bestückte Trägerwerkzeuge für Fräsmaschinen. Sie ermöglichen das großflächige Abtragen von Material, das Planfräsen von Werkstücken auf Maß und die Erzeugung einer gleichmäßigen, planaren Oberflächenstruktur.
Wie das Planfräswerkzeug technisch wirkt und wann es unabdingbar ist
Ein Planfräswerkzeug arbeitet offen auf der Materialoberfläche, sodass Späne radial abgeführt werden. Bei Ausführungen ohne Innenkühlung erfolgt die Wärme- und Spanableitung über externe Kühlmitteldüsen oder zugeführte Druckluft; das ist bei vielen regulären Planfräsarbeiten ausreichend. Modelle mit Innenkühlung verfügen über integrierte Bohrungen und Kanäle, die Kühlschmierstoff oder Blasluft direkt an die Schneidkanten leiten. Diese gezielte Zufuhr verhindert thermische Überlastung, reduziert Aufbauschneidenbildung und spült Späne zuverlässig aus der Schnittzone – entscheidend bei schwerzerspanenden, klebenden Werkstoffen oder sehr großen Schnittbreiten.
Mehr Effizienz im Werkstattalltag durch gezielten Einsatz
- Reduziert Rüstzeiten durch modulare Bestückung mit Wendeschneidplatten und einfachem Plattenwechsel.
- Verbessert die Oberflächengüte durch gleichmäßige Spanabfuhr und, bei Bedarf, gezielte Innenkühlung.
- Erhöht die Standzeit der Werkzeuge, weil thermische Belastung und Aufbauschneidenbildung minimiert werden.
- Sorgt für konstante Maßhaltigkeit bei großflächigen Bearbeitungen dank stabiler Trägerwerkzeuge.
Metav als zuverlässiger Partner für Ihre Planbearbeitung
Metav steht für Demokratisierung der Präzision und kombiniert jahrzehntelange Fachkompetenz mit einem breiten Sortiment. Aus dem Lager in Emmerich liefert Metav als Qualitätsfilter ein Sortiment, das Werkstätten und Industrie mit technisch passenden Planfräsern versorgt. Mit über 48.000 zufriedenen Kunden und mehr als 250.000 Produkten bietet Metav die Auswahl und Verfügbarkeit, um die passende Ausführung — mit oder ohne Innenkühlung — für Ihre Bearbeitungssituation zu finden.
Kurz und prägnant
Ein Planfräser ist das zentrale Werkzeug, wenn große, ebene Flächen schnell, maßhaltig und mit hoher Oberflächenqualität herzustellen sind. Die Wahl zwischen ohne Innenkühlung und mit Innenkühlung richtet sich nach Werkstoff, Schnittbreite und Wärmeentwicklung.
FAQ
Wann ist ein Planfräser mit Innenkühlung erforderlich?
Bei schwerzerspanenden oder stark wärmeentwickelnden Werkstoffen sowie bei sehr großen Schnittbreiten empfiehlt sich ein Planfräser mit Innenkühlung, weil die gezielte Kühlschmierstoffzufuhr thermische Überlastung und Aufbauschneidenbildung verhindert.
Reicht bei normalen Stahlblechen ein Planfräswerkzeug ohne Innenkühlung aus?
Für viele reguläre Planfräsarbeiten an unlegierten und niedrig legierten Stählen ist ein Planfräswerkzeug ohne Innenkühlung ausreichend, da Späne offen radial abfließen und externe Kühlmitteldüsen oder Druckluft die Wärmeableitung übernehmen.
Wie verlängert man die Standzeit von Planfräsern effektiv?
Die Standzeit eines Planfräswerkzeugs lässt sich durch passende Wendeschneidplatten, richtige Schnittparameter, konsequente Spanabfuhr und bei Bedarf durch Innenkühlung deutlich erhöhen.
Welche Vorteile bieten modulare Planfräswerkzeuge im Produktionsalltag?
Modulare Planfräser ermöglichen schnellen Plattenwechsel, reduzieren Rüstzeiten und erlauben die Anpassung an unterschiedliche Schnittbreiten und Werkstoffe ohne kompletten Werkzeugwechsel.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com