Planfräser für schnelle, plane Flächenbearbeitung
Planfräser sind speziell entwickelte Trägerwerkzeuge zum großflächigen Abtrag und exakten Planfräsen von Werkstücken und verbessern die Oberflächenqualität sowie die Prozessstabilität bei der Bearbeitung von Stahl, Guss und NE-Metallen; sie kommen sowohl in offener Ausführung ohne Innenkühlung als auch als innengekühlte Varianten zum Einsatz, wobei die innengekühlte Version durch gezielte Kühlmittelzufuhr thermische Überlastung verhindert und die Standzeit erhöht. Die Werkzeuge dienen dazu, große Schnittbreiten effizient zu bearbeiten und durch optimale Spanabfuhr eine gleichmäßige Oberfläche zu erzeugen, wobei die offene Ausführung einfache Fräsaufgaben mit externer Kühlung abdeckt. Planfräser bieten besonders bei schwer zerspanbaren, wärmeempfindlichen oder klebenden Werkstoffen Vorteile, weil die innengekühlte Bauform die Bildung von Aufbauschneiden reduziert und die Oberflächengüte verbessert.
50mm Round Cutter For RCKT 1204 Indexable Inserts, 4 Cutting Edges, M3.5x8.5 Torx Fixing - Teknik Makina
Take advantage of the combination of reliable insert compatibility, compact Ø50 mm design and a secure 22 mm arbor bore for consistent finishing performance; order the cutter directly via Metav Werkzeuge or contact the consultants for tailored integration advice. Face mill T460TM by Teknik Makina — Ø50 mm, for RCKT 1204 indexable inserts A Face mill T460TM engineered for secure, compact finishing operations with Sandvik RCKT 1204 indexable inserts in small to medium-scale milling setups. Compatible with Sandvik RCKT 1204 inserts Ø50 mm compact milling cutter Four cutting edges for stable finishing 22 mm arbor bore with Torx M3.5x8.5 fixing Compact design that boosts process efficiency The cutter's Ø50 mm diameter and four cutting edges deliver a balance between material engagement and tool life, enabling predictable surface quality during finishing passes. The round tooling concept reduces overhang and vibration in compact set-ups, which supports higher reproducibility and lower scrap rates. Where cycle time and consistent finish matter, this compact face mill provides a measurable improvement in process stability without complex adjustments. Fast, secure insert clamping for reduced downtime A durable Torx screw ( M3.5x8.5 ) and the matching T15 key ensure repeatable clamp torque and quick insert changes. The 22 mm arbor bore gives a precise seating in compatible toolholders, shortening set-up time and reducing runout. For production lines that depend on rapid, repeatable tool exchanges, the robust clamping system minimises the risk of insert loosening and keeps machining tolerances within expected ranges. Straightforward integration with standard indexable inserts Designed specifically for RCKT 1204 indexable inserts from Sandvik, the cutter accepts widely available finishing grades and geometries. Using standard inserts simplifies inventory management and lowers operational complexity: replacement inserts are stocked broadly, and operators can select grades to suit finishing or light-semi finishing tasks. This compatibility reduces procurement overhead and supports a smooth workflow across diverse jobs. Practical benefits for workshops and small manufacturers At approximately 0.287 kg and with a nominal 40 mm overall length, the unit is easy to handle during set-up and storage, while still offering the rigidity expected from a round cutter. The combination of compact dimensions, common insert format and sturdy fixing makes this face mill a sensible choice for shops seeking dependable finishing performance without extensive retooling. For technical enquiries or to confirm fitment with existing holders, Metav’s advisors are available to assist. Contact Metav Werkzeuge for expert fitting guidance and ensure the Teknik Makina T460TM is specified correctly for the application most important to the workshop Technical Data Article number: T460TM Manufacturer: Teknik Makina Product: Face mill for RCKT 1204 indexable inserts ECLASS: 21180902 ETIM: EC011860 Facts Diameter: 50 mm Arbor bore: 22 mm Cutting edges: 4 Total length: 40 mm Weight: 0.287 kg SKU: T460TM Special features Compatible insert type: RCKT 1204 Compatible insert manufacturer: Sandvik Torx screw: M3.5x8.5 Torx key size: T15 Suitable for compact finishing operations FAQ What inserts does this cutter accept? The T460TM face mill accepts RCKT 1204 indexable inserts; it is configured to work with standard Sandvik insert geometries. How is the insert secured in the cutter? Inserts are retained with a Torx screw ( M3.5x8.5 ) tightened with a T15 key to ensure repeatable clamp torque and secure seating. Which arbor bore is required for mounting? A 22 mm arbor bore is required; the cutter seats on toolholders designed for a 22 mm shank diameter. Is the cutter suitable for small workshops? Yes. The compact Ø50 mm diameter and low weight (approx. 0.287 kg) make it convenient for small and medium workshops seeking reliable finishing capability. Can standard finishing inserts be used to adjust surface finish? Standard RCKT 1204 finishing grades and geometries from Sandvik can be fitted to tune surface finish and tool life as process requirements dictate. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Round Insert Cutter For RPMW 1204 Indexable Inserts 5 Teeth, 22mm Shank - Teknik Makina
Take advantage of precise insert compatibility and secure mounting for uninterrupted machining: the combination of a 50 mm cutting head, 5 cutting edges and a Ø22 mm arbor ensures steady material removal and quick insert changes — order directly via Metav Werkzeuge or consult our team for application advice. Rundplattenfräser – round face mill, 50 mm diameter, for RPMW 1204 indexable inserts (Teknik Makina) The Rundplattenfräser is a round face mill engineered for use with RPMW 1204 indexable inserts, offering a compact cutting head suited to general milling and facing operations. 50 mm diameter cutting head 5 cutting edges for steady removal Bore Ø22 mm for secure mounting Compatible with Korloy RPMW 1204 inserts Consistent insert compatibility reduces setup time and risk The cutter is built for repeatable use with RPMW 1204 indexable inserts, which are small, replaceable cutting pieces fixed to the tool body. Compatibility with Korloy inserts simplifies procurement and reduces inventory complexity. The Ø22 mm arbor interface gives a secure fit to common toolholders, lowering runout risk and improving stability. For workshops, this means fewer interruptions: insert replacement becomes a routine task rather than a production pause, keeping cycle times predictable and maintenance straightforward. Balanced geometry for reliable material removal and surface quality A 50 mm tool diameter combined with 5 cutting edges balances cutting load and feed distribution. More cutting edges permit finer engagement per tooth, which often results in improved surface finish and longer insert life under comparable conditions. The rotational dynamics of a compact, multi-edge cutter reduce vibration, supporting consistent dimensional accuracy during facing and light milling tasks. Where repeatability is required, the cutter’s geometry supports predictable chip formation and easier process parameter tuning. Practical workshop features that save time on the shop floor Fast clamping and low-maintenance handling are built in: the insert is secured with an M4x7 screw tightened using a Torx T15 key, a common configuration in modern tooling that speeds assembly and replacement. The compact overall height and robust mounting minimise handling effort while enabling easy access in crowded setups. Sourcing via Metav Werkzeuge provides the added assurance of a European supply chain and technical guidance, backed by a large product range and a reputation for dependable delivery. Choose the Teknik Makina round face mill from Metav Werkzeuge for precise, repeatable machining with RPMW 1204 inserts — contact Metav Werkzeuge for tailored technical advice at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: T711TM Manufacturer: Teknik Makina SKU: T711TM Compatible inserts: RPMW 1204 Compatible insert manufacturer: Korloy Facts Diameter: 50 mm Overall height: 40 mm Cutting edges: 5 Bore / shank diameter: 22 mm Torx screw: M4x7 Torx key: T15 Special features Designed for RPMW 1204 indexable inserts Secure Ø22 mm mounting Compact face milling profile Quick insert replacement via Torx T15 FAQ What inserts fit this cutter? The cutter is designed for RPMW 1204 indexable inserts and is compatible with Korloy RPMW 1204 grades; use inserts sized for RPMW 1204 geometry. How is the insert clamped in place? The cutting insert is secured with an M4x7 screw that requires a Torx T15 key for tightening and removal. What is the arbor or mounting diameter? The tool features a Ø22 mm bore for mounting to toolholders accepting a 22 mm interface. How many cutting edges does the cutter provide? This face mill has 5 cutting edges, which support steady chip load distribution and finer surface results under appropriate feeds. Can this cutter be supplied by Metav Werkzeuge? The tool is available via Metav Werkzeuge; contact the team for availability, delivery options and application guidance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Round Insert Milling Cutter for RDMT 1003 Indexable Inserts, 5 Teeth, 22mm Shank Diameter - Teknik Makina
Take advantage of a compact, rigid milling solution that combines a Ø 50 mm diameter and 5 cutting edges for higher material removal per revolution, while the 22 mm shank and 40 mm overall length ensure stable clamping and repeatable results; order directly via Metav Werkzeuge or request advice from our consultants. Round Insert Milling Cutter — indexable face mill, Ø 50 mm, 5 cutting edges | Teknik Makina A robust Round Insert Milling Cutter engineered for indexable‑insert milling with RDMT 1003 inserts; designed for stable finishing and general purpose milling in production and workshop environments Ø 50 mm cutter body Five cutting edges for increased productivity 22 mm shank for rigid clamping Compatible with RDMT 1003 indexable inserts Better cutting performance in a compact tool The compact diameter and multi‑edge concept deliver a practical balance between cutting capacity and stability. The Ø 50 mm body combined with 5 cutting edges reduces the cutting load per tooth, which can lead to smoother chip formation and improved surface finish in many indexable milling operations. For users less familiar with insert technology: RDMT style inserts are reversible, indexable carbide plates that can be rotated or changed quickly, so the tool stays productive with minimal downtime. This approach supports efficient series machining where consistent surface quality is required. Stability and repeatability for tighter tolerances A substantial 22 mm shank and a short 40 mm overall length provide a rigid connection between the spindle and the cutting head, limiting vibration during cutting. Reduced deflection contributes to more consistent dimensions across batches and simplifies process set‑up on both CNC machines and milling centres. The tool’s balance—at about 0.302 kg—aids in predictable dynamic behaviour, which is particularly relevant for high spindle speeds or when reproducing the same programme across multiple workpieces. Serviceable fastening for quick maintenance Fast, standardised clamping elements make routine servicing straightforward: the cutter uses a M3,5 locking screw together with a M3,5x8,5 Torx screw, compatible with a T15 Torx key. These standard thread and drive sizes permit quick insert changes and controlled tightening torque without specialised equipment, shortening tool change cycles and keeping machines productive. Clear identification of screw types also helps maintenance teams order correct fasteners and replacement parts without delay. Versatile tool for indexable insert applications Engineered for insert‑based milling, this indexable cutter suits a wide range of workshop tasks where the flexibility of replaceable carbide inserts is desired. The design prioritises straightforward handling and rapid insert replacement over complex geometries, making it a reliable choice for both prototyping and production. With established insert standards, the cutter integrates easily into existing tooling systems and contributes to lower tooling overhead through the reuse of inserts until wear limits are reached. For supply, compatibility checks and technical guidance on Teknik Cutting Tools indexable systems, contact Metav Werkzeuge for tailored advice and prompt provision at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T291TM Brand: Teknik Makina ECLASS: 21180902 ETIM: EC011860 Core specifications Diameter: 50 mm Cutting edges: 5 Overall length: 40 mm Shank diameter: 22 mm Weight: 0.302 kg SKU: T291TM Special features For RDMT 1003 indexable inserts Locking screw: M3,5 Torx screw: M3,5x8,5 Torx key: T15 FAQ What insert type does this cutter use? The tool is designed for RDMT 1003 indexable inserts; RDMT‑style plates are compatible with the cutter’s pocket and clamp arrangement. Which shank diameter is required for stable clamping? The cutter features a 22 mm shank to ensure rigid mounting and repeatable positioning in standard toolholders. How many cutting edges are available and what is the benefit? This indexable cutter has 5 cutting edges, which distribute the load across more teeth and can improve surface finish and productivity in many milling operations. What fastening components are used for inserts? Insert retention uses a M3,5 locking screw together with a M3,5x8,5 Torx screw; the drive size is T15 for controlled tightening. What is the article number for ordering or reference? Refer to SKU T291TM when enquiring or ordering the Round Insert Milling Cutter from Teknik Cutting Tools. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Round Insert Milling Cutter for RDMT 1604 Indexable Inserts 4 Teeth, 22mm Shank Diameter - Teknik Makina
Combining a compact 50 mm diameter, four cutting edges and a sturdy 22 mm shank, this milling head delivers consistent, efficient material removal with low vibration. Benefit from straightforward insert replacement and controlled chip evacuation for uninterrupted production. Order the Round Insert Face Mill directly via Metav Werkzeuge or consult the technical team for tailored recommendations. Round Insert Face Mill T270TM — 50 mm, for RDMT 1604 indexable inserts (Teknik Makina) A compact milling cutter body designed for use with RDMT 1604 indexable inserts, the Round Insert Face Mill T270TM suits finishing and light to medium roughing operations in workshop and production environments. 50 mm diameter for compact machining Four cutting edges for steady material removal 22 mm shank for stable spindle fit Compatible with RDMT 1604 indexable inserts High precision and predictable cycle times The cutter body is engineered to provide reliable geometry and consistent cutting engagement; the 50 mm diameter and four cutting edges combine to reduce vibration and improve surface finish. In practice, this means fewer reworks and steadier cycle times, which supports production planning. The tool's weight of 0.35 kg and compact length are optimised for dynamic stability on smaller machining centres, while the modular insert system reduces downtime during insert changes. Secure mounting and fast insert exchange for productivity Mounting and clamp integrity are central to repeatable results. The tool accepts a 22 mm shank, ensuring a rigid connection to the spindle, and uses a locking screw M4x10 together with Torx screw M4.5x11 (Torx key T20) for secure seating of the inserts and plate. This assembly permits quick index changes of RDMT 1604 inserts while maintaining concentricity and cutting stability, so the milling head supports a high-availability workflow with minimal adjustment time. Practical handling and workshop benefits Designed for straightforward workshop use, the cutter accepts the BSP010 support plate and is compatible with commonly stocked RDMT 1604 inserts, simplifying logistics. The combination of compact size and proven fastening hardware makes maintenance predictable: replacement of the indexable inserts and retorque of the fixing screws are rapid procedures, reducing machine downtime. The robust construction and standardised interfaces facilitate integration into existing tool inventories and support a consistent quality output over repeated cycles. Contact Metav Werkzeuge today for precise application advice and fast dispatch from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific machining tasks Technical data Article number: T270TM Manufacturer: Teknik Makina Product type: Round insert face mill for indexable inserts Compatible inserts: RDMT 1604 ECLASS: 21180902 ETIM: EC011860 Facts Diameter: 50 mm Cutting edges: 4 Overall length: 50 mm Shank diameter (d): 22 mm Weight: 0.35 kg Special features Locking screw: M4x10 Torx screw: M4.5x11 Torx key: T20 Support plate: BSP010 Files available (product images/specs) FAQ Which inserts fit this cutter and how often should they be indexed? The cutter is designed for RDMT 1604 indexable inserts; indexing frequency depends on material and cutting parameters, but the milling head enables fast insert changes to keep process times low. Is the shank size suitable for standard collets and toolholders? Yes, the tool has a 22 mm shank, matching common holders for compact spindle systems and ensuring a rigid connection during milling. What fastening components are delivered with the cutter? The assembly uses a locking screw M4x10, Torx fixing screws M4.5x11 and accepts the BSP010 support plate; a T20 Torx key is specified for maintenance operations. Can the cutter be used for both finishing and light roughing? The cutter body and four-edge configuration are intended for finishing and light to medium roughing operations where stable chip removal and surface quality are required. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Round Insert Milling Cutter for RDMT 1604, Internal Coolant, 4 Teeth - Teknik Makina
Benefit from a compact milling solution that combines a 50 mm diameter cutting head, internal coolant and dependable Torx clamping for steady, high-quality facing. The solid construction and easy insert replacement reduce downtime and support uninterrupted production. Order directly via Metav Werkzeuge or consult our application specialists for tailored recommendations. Round indexable face mill – 50 mm diameter, internal coolant (Teknik Makina) The Round indexable face mill is a compact cutting head designed for industrial face milling with RDMT 1604 indexable inserts, suitable for precision workshop and CNC operations where repeatable surface finish and fast insert changes are required. 50 mm diameter for precise facing Internal coolant for improved chip control Compatible with RDMT 1604 indexable inserts Four cutting edges for stable machining Consistent productivity from the 50 mm cutting head The 50 mm diameter and four cutting edges deliver a balanced combination of material removal rate and surface quality, making the tool ideal for frequent facing operations. By accepting RDMT 1604 indexable inserts the cutter simplifies tooling logistics and keeps set-ups consistent across machines. The compact geometry of this milling head promotes steady cutting forces, which supports longer tool life and reduces the need for frequent adjustments — a direct gain in operational efficiency for production and maintenance planners. Secure clamping and straightforward servicing to cut downtime Clamping and insert retention are engineered for rapid, safe handling: the head uses T15 Torx fastening and M4x10 screws to ensure secure clamping of the inserts. With an overall length of 50 mm overall length and a mass of 0.351 kg, the assembly is easy to handle for rapid tool changes without compromising rigidity. The visible screw standardisation shortens maintenance time and keeps replacement parts simple to source, delivering practical benefits at the shopfloor level in the form of reduced machine idle time and quicker changeovers. Designed for practical workshop use with internal coolant benefits Equipped with internal coolant, this face mill supports improved cooling at the cutting edge and more controlled chip evacuation, which helps maintain consistent surface finish during extended runs. The acceptance of indexable inserts keeps operating costs manageable: worn cutting edges are replaced rather than the whole tool, helping workshops and CNC cells keep tooling budgets predictable. As a compact, robust head from Teknik Makina, it integrates easily into standard tool inventories and is especially suited where dependable, repeatable facing performance is a procurement priority. For tailored procurement advice or technical application support for the TekniK Makina 50 mm round indexable face mill (SKU T270-1TM), contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, reliable assistance Technical data SKU: T270-1TM Product type: Round indexable face mill Model designation: for RDMT 1604 Indexable Inserts Manufacturer: Teknik Makina Facts Diameter: 50 mm Overall length: 50 mm Weight: 0.351 kg Cutting edges: 4 Special features Internal coolant: yes Compatibility: RDMT 1604 indexable inserts Screw: M4x10 Torx key: T15 Label: 50mm Rundplattenfräser RDMT 1604 L50mm mit Innenkühlung FAQ Which inserts fit this face mill? The face mill accepts RDMT 1604 indexable inserts; the cutter head is built specifically for that insert geometry and grade range. Is internal coolant supplied through the tool body? Yes, the tool features internal coolant, routed to support cooling at the cutting edge and improved chip evacuation during extended cycles. What fastening hardware is required for insert changes? Insert retention uses T15 Torx screws — specifically M4x10 — for consistent and secure clamping when replacing inserts. How does the tool support quick changeovers? The compact design, standardised screw size and acceptance of RDMT 1604 inserts simplify replacements, reducing downtime compared with non‑indexable solutions. Which manufacturer produces this milling head and what is the SKU? This milling head is from Teknik Makina and is listed under SKU T270-1TM for ordering and inventory purposes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Round Insert Milling Cutter For RHKW 1204 Indexable Inserts, 5 Teeth, 22mm Shank - Teknik Makina
Take advantage of a compact, high‑performance milling head that combines reliable compatibility with easy maintenance — the 50 mm diameter design with five cutting edges and a Ø 22 mm shank delivers stable material removal and short tool changes. Order or request advice through Metav Werkzeuge for fast, dependable delivery and workshop integration. Round face mill T613TM — 50 mm diameter, for RHKW 1204 indexable inserts (Teknik Makina) Round face mill T613TM is a compact cutter designed for heavy finishing and light roughing with RHKW 1204 indexable inserts, suitable for standard milling spindles with a 22 mm shank diameter. 50 mm diameter milling head Fits RHKW 1204 indexable inserts Shank Ø 22 mm for stable clamping Five cutting edges for efficient passes High material removal rates with consistent surface quality The milling head is engineered to provide repeatable chip evacuation and stable cutting forces, which reduces cycle times on serial work. With a 50 mm cutter body and 5 cutting edges, the tool balances feed per tooth and depth of cut to maintain surface quality while improving throughput. The combination of a short overall length and a compact mass keeps runout low; this benefits production runs where process stability and reproducible geometry are essential. Operators and planners will appreciate fewer interrupted cycles thanks to the robust mechanical layout. Quick insert changes and low-maintenance set‑up Fast servicing is supported by the standard clamping and screw specification: clamp screw M3.5, Torx screw M4x10, and Torx key T15. The clamping concept enables precise seating of each insert and straightforward replacement of worn cutters, reducing downtime. Compatibility with RHKW 1204 indexable inserts and alternative acceptance of Ingersoll‑type plates simplifies inventory: a single cutter body can be re‑used across multiple insert lives, lowering toolholder costs and simplifying tool management for maintenance teams. Rigidity and accuracy for repeatable production A Ø 22 mm shank and compact 40 mm overall length deliver the stiffness required for tight tolerance finishing operations. The cutter mass and geometry are tuned to minimise vibration and heat build‑up, increasing insert life and process reliability. For tasks where consistent dimensional control matters, the stable interface between spindle and cutter reduces corrective rework and supports lean production objectives. Technical teams will value the predictable behaviour in both single‑part and batch production scenarios. Versatile integration across common machining tasks Designed as a general‑purpose round face mill, this cutter suits light finishing and medium finishing on a range of ferrous and non‑ferrous components when paired with the appropriate inserts. The compact form factor and modest weight (0.304 kg) allow straightforward use in smaller machining centres and fixture setups where space is limited. Process planners can adopt the tool where incremental performance gains — fewer passes, faster indexing, simpler inventory — help improve overall equipment effectiveness without complex retooling. For tailored tooling solutions and order processing, contact Metav Werkzeuge — technical advice and rapid supply are available directly from Metav Werkzeuge to support integration of the Teknik Cutting Tools T613TM into production workflows (eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930) Technical data Article number: T613TM Name: Rundplattenfräser for RHKW 1204 Indexable Inserts Manufacturer: Teknik Makina SKU: T613TM Weight: 0.304 kg Core technical figures Diameter: 50 mm Cutting edges: 5 Shank diameter (Ø): 22 mm Overall length: 40 mm Special features Fits RHKW 1204 indexable inserts Compatible with Ingersoll inserts Clamp screw: M3.5 Torx screw: M4x10 Torx key: T15 FAQ What inserts does this cutter accept? The T613TM round face mill accepts RHKW 1204 indexable inserts; compatibility with Ingersoll‑type plates is also indicated for flexible inventory use. Which shank size is required for the toolholder? The cutter has a Ø 22 mm shank and an overall length of 40 mm, so a collet or holder matching a 22 mm shank is required for correct clamping. How many cutting edges are provided and what is the benefit? This milling head features 5 cutting edges, which permit higher feed per revolution with improved surface finish compared with fewer‑edge designs. What fastening hardware is supplied or required for inserts? Insert clamping uses a M3.5 clamp screw and a M4x10 Torx screw; the specified key size is T15 for secure, repeatable fastening. Is the cutter suitable for small machining centres? Yes, the compact length and modest weight (0.304 kg) make the cutter suitable for smaller machining centres where space and stiffness are considerations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Round Insert Milling Cutter for RPMT 10T3 Indexable Inserts L40mm With Internal Coolant - Teknik Makina
Take advantage of the combination of a 50 mm diameter, internal coolant and proven compatibility with RPMT 10T3 inserts for efficient, reliable face milling — order directly via Metav Werkzeuge or ask our consultants for application advice. Teknik Makina round insert milling cutter »T707-1TM« with 50 mm diameter and internal coolant The Teknik Makina round insert milling cutter offers a compact, coolant-fed head for high-productivity face milling with RPMT 10T3 indexable inserts, ideal for mixed production environments and jobbing shops. 50 mm diameter for broad cutting paths Internal coolant channel Fits RPMT 10T3 Korloy inserts Six cutting edges for high productivity High productivity through robust geometry and insert system The milling head is engineered around a stable body and an insert system that accepts RPMT 10T3 indexable inserts, delivering consistent chip control and predictable tool life. With a 50 mm diameter and six cutting edges, the cutter spreads cutting forces and reduces vibration, which translates into smoother surface finish and higher feed rates. The combination of the indexable insert format and the cutter geometry makes changeovers quick and cost-efficient, while maintaining productivity across varying batch sizes. Reliable cooling and secure fastening for longer tool life Equipped with an internal coolant channel, the tool supplies lubricant directly to the cutting zone, lowering temperatures and improving swarf evacuation during heavy cuts. The head uses M3.5x8.5 torx screws with a T15 Torx key for positive clamping of the inserts; this fastening ensures repeatable seat position and stable cutting even under interrupted cuts. These features help to extend insert life and reduce unplanned interruptions in production, supporting a smoother machining workflow. Compatibility, handling and maintenance simplified Designed for use with Korloy RPMT 10T3 inserts, the cutter supports widely available grades and geometries suitable for steel and general-purpose applications. The 40 mm overall length and compact form factor enable installation in standard face milling holders while keeping overhang minimal — a practical advantage for operators aiming to reduce chatter. Routine maintenance is straightforward: inspect screw torque on the T15 drives and check coolant channels for blockage to retain peak performance. Applications and process benefits in everyday production This milling head is tailored for face milling operations where a balance of removal rate and surface quality is required. The six-edge layout offers a consistent material removal rate across mild to moderate depths of cut, making the tool suitable for batch production, component surfacing and semi-finish operations. By combining a compact design with internal coolant and a standard insert format, the cutter reduces tooling complexity and supports faster set-ups on a wide range of machining centres. Contact Metav Werkzeuge for a detailed process consultation on Teknik Cutting Tools' T707-1TM round insert milling cutter with internal coolant — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and availability. Technical data Article number: T707-1TM SKU: T707-1TM E-class: 21180902 Facts Diameter: 50 mm Overall length: 40 mm Weight: 0.359 kg Cutting edges: 6 Special features Compatible inserts: RPMT 10T3 Insert manufacturer compatibility: Korloy Internal coolant: yes Torx screw: M3.5x8.5 Torx key: T15 Product type: round insert milling cutter (face milling head) FAQ Which inserts are required for this cutter? The cutter is designed for RPMT 10T3 indexable inserts; Korloy inserts in the RPMT 10T3 format are suitable and commonly used with this head. Is the tool suitable for use with internal coolant systems? Yes, the head features an internal coolant channel that feeds the cutting zone directly to improve cooling and chip evacuation. What clamping hardware is used for the inserts? Inserts are secured with M3.5x8.5 torx screws tightened with a T15 Torx key to ensure consistent seating and reliable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Round Milling Cutter for RDMT 1003 Indexable Inserts 4 Cutting Edges, 22mm Shank - Teknik Makina
Benefit from a compact, high‑performance milling solution that combines a 50 mm cutting diameter, four replaceable cutting edges and a 22 mm shank for secure toolholder integration; order directly via Metav Werkzeuge or consult the technical team for application support. Round Insert Milling Cutter T290TM — 50 mm diameter, for RDMT 1003 indexable inserts by Teknik Cutting Tools A Round Insert Milling Cutter T290TM designed for precision peripheral milling with RDMT 1003 indexable inserts, suited to compact setups and standard toolholders Compact 50 mm diameter for tight spaces Accepts RDMT 1003 indexable inserts 22 mm shank for secure toolholder fit Four cutting edges for efficient stock removal Precise, compact milling for constrained setups The 50 mm cutter body offers a space‑saving solution where larger cutters would not fit, while the tool’s four cutting edges enable even material removal and extend the service interval between insert changes. Compatibility with RDMT 1003 indexable inserts means the cutting geometry can be restored quickly by replacing the inserts rather than the whole tool, which reduces consumable costs and simplifies workshop logistics. The combination of small cutter diameter and multiple edges is particularly advantageous for series work on components with limited clamping space. Rapid insert replacement and reliable clamping Maintenance is streamlined: insert retention is achieved with a locking screw system (locking screw M3.5) and a dedicated Torx screw (M3.5x8.5) that is tightened with a T15 key, ensuring consistent clamp force and repeatable seating. Indexable inserts are carbide tips mounted on the cutter body, allowing worn cutting edges to be rotated or replaced without regrinding; this practice cuts downtime and keeps process costs predictable. The described screw and key combination supports secure clamping, reducing the risk of insert movement under cutting forces. Stable toolbody and straightforward integration A 22 mm shank diameter provides a robust connection to conventional collets and toolholders, while the compact overall length of 40 mm and low mass (0.31 kg) limit overhang and vibration, improving surface finish and tool life. The tool is supplied for use with standard RDMT 1003 inserts, making it suitable for a range of milling operations where indexable carbide inserts are preferred for their balance of economy and cutting performance. The item is identified under SKU T290TM, enabling easy matching with procurement and tooling lists. For efficient indexable milling with fast insert changes and secure clamping, contact Metav Werkzeuge for a tailored recommendation or technical advice – call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss the T290TM and delivery from Emmerich. Technical Data Article number: T290TM Manufacturer: Teknik Makina Product: Round insert milling cutter for RDMT 1003 indexable inserts ECLASS: 21180902 ETIM: EC011860 Dimensions & Performance Diameter: 50 mm Number of cutting edges: 4 Shank diameter: 22 mm Overall length: 40 mm Weight: 0.31 kg Designs & Fastening Compatible inserts: RDMT 1003 Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key size: T15 FAQ What inserts are compatible with this cutter? The round insert milling cutter accepts RDMT 1003 indexable inserts; this insert family is specified for the T290TM and offers replaceable carbide cutting edges. How is the insert secured in the cutter? Insert clamping is performed using a locking screw (M3.5) together with the Torx screw (M3.5x8.5) tightened with a T15 key to ensure secure seating and repeatable positioning. Is the shank suitable for standard holders? The 22 mm shank diameter is compatible with common collets and toolholders designed for 22 mm shanks, providing stable mounting for milling tasks. What benefits do indexable inserts provide compared with solid tooling? Indexable inserts used on this cutter allow worn cutting edges to be rotated or replaced quickly, reducing downtime and lowering consumable costs while maintaining consistent cutting geometry. Which applications suit this cutter best? The cutter is suitable for peripheral milling operations in constrained workspaces where a 50 mm diameter tool with multiple cutting edges delivers efficient material removal and good surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Square Tool Head for XNEX 0806 Indexable Inserts L45mm with Internal Coolant, 90° - Teknik Makina
Compact coolant-through design combined with a precise 90° cutting geometry and compatibility with XNEX 0806 indexable inserts deliver reliable shoulder turning and reduced cycle times; order the corner tool head directly via Metav Werkzeuge or ask our consultants if needed. Corner tool head for XNEX 0806 indexable inserts (50 mm, coolant-through) — Teknik Makina The corner tool head for XNEX 0806 indexable inserts is an angle toolholder engineered for turning applications, providing stable shoulder cuts and compact installation for machine shops and production cells. 50 mm diameter with 90° cutting angle Internal coolant supply for chip control Compatible with XNEX 0806 inserts (SECO) Compact 45 mm overall length for tight setups Precise geometry for reproducible shoulder turning The toolhead’s 50 mm body and defined 90° cutting angle create a stable reference for shoulder and facing operations, reducing rework and set-up iterations. With the insert seat tailored to the XNEX 0806 family, the toolhead ensures repeatable seating and consistent cutting geometry, which translates into predictable dimensional outcomes. This stability benefits batch production where identical profiles are required across multiple parts, and it shortens machine idle times due to fewer adjustments. Coolant-through feed improves tool life and process security The integrated internal coolant channel directs cutting fluid directly to the cutting edge, improving heat dissipation and chip evacuation at the critical contact zone. This targeted cooling lowers thermal loads on the insert, slowing wear and helping maintain cutting-edge geometry for longer. The result is higher tool life and fewer insert changes per shift, increasing uptime and reducing tooling consumption — measurable gains for production-oriented workshops. Robust clamping and compact form for tight workspaces Designed with a short 45 mm overall length, this head fits compact tool posts and enables close-radius operations without interference. The clamping system uses a T15 Torx key and the M4x12.5 fixing screw for secure, repeatable retention of the cutting insert; this simple, serviceable fastening reduces downtime during index changes. At approximately 0.394 kg, the assembly supports rigid mounting while keeping mass low to minimise toolholder inertia, which helps maintain surface finish and dimensional stability during high-speed rotations. Contact Metav Werkzeuge today to discuss how the Teknik Makina corner tool head with coolant-through capability can be integrated into existing setups and to request tailored configuration advice from our specialists Technical data SKU: T841-1TM Product type: Corner tool head Label: 50mm Eckmesserkopf XNEX 0806 L45mm mit Innenkühlung Manufacturer: Teknik Makina ECLASS: 21181015 UID: T841-1TM Dimensions & performance Body diameter: 50 mm Shank/seat diameter: 22 mm Overall length: 45 mm Cutting angle: 90° Number of cutting edges: 5 Weight: 0.394 kg Fixing screw: M4x12.5 Torx key: T15 Features & compatibility Internal coolant supply (coolant-through) Designed for XNEX 0806 indexable inserts Compatible insert manufacturer: SECO Short installation length for compact setups Secure Torx fastening for repeatable clamping FAQ What inserts fit this tool head? The corner tool head is designed to accept XNEX 0806 indexable inserts; compatibility with SECO-specified inserts is confirmed for secure seating and correct cutting geometry. Is the tool head suitable for coolant-through machining? Yes, the head features internal coolant to feed cutting fluid directly to the insert edge, improving chip removal and reducing insert wear. Which fastening hardware is required for insert clamping? Clamping uses a T15 Torx key and an M4x12.5 screw for reliable and repeatable retention of the indexable insert. Can this head be used in compact tool posts? The compact 45 mm overall length is intended for tight setups and close-clearance operations where a reduced projection is necessary. How does the 90° cutting angle benefit production? A 90° geometry provides a clear shoulder reference and uniform contact conditions, which aids in producing consistent part faces and speeds up set-up for batch work. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Square Tool Holder ADMT 1204 Indexable Inserts L45mm Internal Coolant, 90° Cut Angle - Teknik Makina
Take advantage of the combination of a 50 mm head diameter, internal coolant and proven compatibility with ADMT 1204 indexable inserts to increase productivity and reduce tool-change frequency; order the corner tool head directly via Metav Werkzeuge or ask our consultants for application advice. Corner tool head T215-1TM – 50 mm diameter, internal coolant (Teknik Cutting Tools) Corner tool head T215-1TM is a compact turning head designed for external and profile turning with ADMT 1204 indexable inserts, delivering stable performance in light to medium turning operations. 50 mm head diameter Internal coolant supply Fits ADMT 1204 indexable inserts (Walter) Compact L45 mm length, five cutting positions Maximised metal removal with a compact footprint The compact 50 mm diameter and L45 mm overall length deliver a rigid cutting geometry that supports higher material removal rates without demanding a larger tool post. The head’s 90° cutting angle concentrates cutting forces into a predictable vector, reducing chatter and enabling shorter cycle times on batch work. With five cutting positions, the head extends productive operating intervals before maintenance is required, translating directly into fewer tool changes and improved uptime on the shopfloor. Coolant-fed cutting for longer, more consistent tool life Integrated internal coolant channels ensure the cutting edge receives directed coolant flow at the tool–workpiece interface. This improves chip evacuation, reduces thermal load on the insert and enhances surface integrity of the workpiece. The result is extended tool life and a more consistent finish across runs, which is particularly valuable when working to tight dimensional tolerances or when running longer production sequences. Secure clamping and proven insert compatibility for reproducible results Accepting ADMT 1204 indexable inserts and compatible with inserts from Walter, the head uses a Torx screw fix of M3x7 secured with a T8 key for reliable seating and repeatable indexing. The light 0.35 kg mass of the head contributes to reduced centrifugal and inertial forces in turning, while the robust clamp arrangement maintains seating accuracy during interrupted cuts, delivering reproducible part quality across shifts. Supply confidence and technical partnership for workshop success Sourced from Teknik Cutting Tools and available through Metav Werkzeuge, this tool head benefits from a distribution network focused on accessibility and reliable supply. Metav’s emphasis on making precision affordable, backed by decades of expertise and a broad industrial offering, supports predictable procurement and rapid replacement when needed — an important consideration for production environments that cannot tolerate downtime. Speak with Metav Werkzeuge in Emmerich to specify the T215-1TM corner tool head for the intended turning application and ensure the correct insert and coolant configuration for best results Technical data Article number: T215-1TM EClass: 21181015 Manufacturer: Teknik Makina Facts Diameter: 50 mm Overall length: 45 mm Weight: 0.35 kg Cutting angle: 90° Cutting positions: 5 Special features Internal coolant For ADMT 1204 indexable inserts Compatible with Walter inserts Torx screw M3x7 Torx key T8 FAQ How does the internal coolant improve performance? Internal coolant directs fluid to the cutting zone, improving chip evacuation and reducing heat; the T215-1TM’s internal coolant helps extend insert life and maintain consistent surface finish. Which inserts fit this head? The head accepts ADMT 1204 indexable inserts and is dimensioned for compatibility with inserts from Walter, allowing easy integration into existing insert stocks. What fastening hardware is required for insert clamping? Insert clamping uses an M3x7 Torx screw tightened with a T8 key for secure and repeatable seating of the insert in the T215-1TM. Is the head suitable for heavy interrupted cuts? The compact geometry and robust clamping are designed to handle light to medium interrupted cuts; stable performance depends on machine rigidity and selected insert grade. Can the head be used for profile turning and facing operations? Yes — the 90° cutting angle and multiple cutting positions make it suitable for profile turning and facing tasks where ADMT 1204 inserts provide the required edge geometry. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Turning Tool Holder 90° For ADMT 1204 Indexable Inserts M3x7 Torx T8, 22mm Shank - Teknik Makina
Take advantage of the combination of secure Torx clamping, a compact 22 mm shank and a 90° cutting geometry for reliable square-shoulder turning; order the tool directly via Metav Werkzeuge or contact their specialists for procurement and technical advice. Eckmesserkopf T215TM — Turning head for ADMT 1204 indexable inserts with 90° cutting angle The Eckmesserkopf T215TM is a compact turning head designed for external square-shoulder and face-turning operations, compatible with ADMT 1204 indexable inserts and built for stable lathe integration. 90° cutting angle for square-shoulder turning 22 mm shank diameter for standard tool posts Compatible with ADMT 1204 indexable inserts Torx fastening M3x7, requires T8 key Improved machining stability for precise shoulder finishes The 90° cutting geometry delivers consistent shoulder formation and planing results while the 50 mm head diameter increases the contact area with the tool post, providing improved rigidity and vibration damping. This stability reduces chatter and helps maintain surface quality during interrupted cuts. Thanks to the 22 mm shank, the holder integrates with many common tool posts without the need for adaptors, enabling a compact, repeatable setup that supports predictable cycle times and consistent component tolerances. Fast, secure insert changes that save setup time Clamping is executed with a Torx M3x7 screw tightened using a T8 key, ensuring a secure and reproducible fit for each insert. The holder is prepared for indexable inserts of the ADMT 1204 format and accepts inserts from Walter, which simplifies procurement and compatibility in mixed-tool shops. With five cutting edges, the insert life is optimised through quick indexing; changeovers take only moments, reducing machine downtime and improving overall tool utilisation. Compact dimensions for tight tool stations and versatile integration With an overall length of 45 mm and a mass of 0.35 kg, the turning head is engineered for operations with restricted overhang and limited turret clearance. The compact footprint supports setups where space is at a premium while the moderate weight keeps centrifugal and dynamic loads low during higher-speed turning. This combination of compactness and performance makes the component suitable for both serial production and small-batch precision work where tool access and repeatability matter. Contact Metav Werkzeuge for stock and tailored application advice regarding the Teknik Makina Eckmesserkopf T215TM; technical enquiries by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: T215TM Manufacturer: Teknik Makina Type: Eckmesserkopf for ADMT 1204 Indexable Inserts Facts Shank diameter: 22 mm Head diameter: 50 mm Overall length: 45 mm Weight: 0.35 kg Cutting angle: 90° Cutting edges: 5 Special features Torx screw: M3x7 Torx key: T8 Compatible insert manufacturer: Walter Suitable for: ADMT 1204 indexable inserts FAQ Is this turning head compatible with ADMT 1204 inserts? Yes. The T215TM is designed specifically for ADMT 1204 indexable inserts and is compatible with inserts from Walter. What mounting and overall dimensions does the holder have? The holder features a 22 mm shank diameter, a 50 mm head diameter and a 45 mm overall length, which makes it suitable for compact tool stations. How are inserts secured in the holder? Inserts are clamped with a Torx screw M3x7; tightening and removal require a T8 key for reproducible clamping torque. What cutting geometry and applications are intended? The tool provides a 90° cutting angle optimized for square-shoulder turning and face finishes, offering stable results on interrupted and continuous cuts. Is the holder suitable for limited-clearance turrets? Yes; the 45 mm overall length and 0.35 kg weight make the T215TM appropriate for tight turret pockets and space-constrained setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
52mm Corner Turning Head for BOMT 1304 Indexable Inserts Internal Coolant, 90° Cutting Angle, L40mm - Teknik Makina
Taking advantage of the combination of compact design, integrated internal coolant and precise 90° geometry, the tool head ensures stable corner turning and reduced cycle times; order the component directly via Metav Werkzeuge or request specialist advice from our consultants. Corner tool head T966-3TM — 52 mm diameter, internal coolant (Teknik Makina) The Corner tool head T966-3TM is a compact indexable holder for BOMT 1304 indexable inserts, designed for precise 90° corner turning in confined setups while providing integrated internal coolant to improve tool life and chip control 52 mm diameter for compact turning heads Integrated internal coolant supply Compatible with BOMT 1304 indexable inserts Deliverable precision for corner turning operations The compact head offers a defined 90° cutting angle and placement for BOMT 1304 inserts, delivering repeatable positioning that translates into consistent batch quality. With a 52 mm diameter and a short overall length, the design limits overhang and vibration, which directly benefits surface finish and tolerances. The presence of internal coolant channels supports effective cooling and chip evacuation at the cutting edge, reducing thermal wear and helping to maintain tool geometry over extended runs. This results in fewer regrinds and more predictable tool-change intervals, supporting lean production schedules. Reduced downtime through practical fastening and maintenance Changeovers are simplified by standardised fastening: the head uses M3.5x8.5 Torx screws and an accessible Torx T10 interface, enabling straightforward insert clamping and fast maintenance procedures. The compact overall length of 40 mm and light mass of 0.412 kg allow installation in tight toolpost arrangements with minimal impact on balance. These features support rapid set-up and lower fixturing complexity, which translates into higher machine uptime and easier integration into existing turning cells. Maintenance routines are short and predictable, helping planning and stock management for replacement screws and inserts. Proven compatibility and industrial suitability Designed by Teknik Makina and supplied under SKU T966-3TM, the head is matched to inserts from recognised manufacturers and is specified for BOMT 1304 plates; the toolholder accepts standard indexable parts, ensuring broad availability of cutting grades for different materials. The robust layout and coolant provision make the head suitable for production environments where consistent cycle times and reproducible results are required. The compact profile also facilitates use on smaller lathes and machining centres where access is limited, while retaining the stability expected in industrial turning operations. Contact Metav Werkzeuge today to secure the Teknik Makina corner tool head featuring integrated internal coolant and precise 90° geometry — our advisors at Metav Werkzeuge can confirm compatibility, advise on insert grades and ensure reliable supply from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T966-3TM Manufacturer: Teknik Makina Product type: Corner tool head Facts Diameter: 52 mm Overall length: 40 mm Weight: 0.412 kg Cutting angle: 90° Number of cutting edges: 5 Torx screw: M3.5x8.5 Torx key: T10 Special features Internal coolant For BOMT 1304 indexable inserts Compatible with inserts from Ingersoll FAQ Which inserts fit this corner tool head? The corner tool head is specified for BOMT 1304 indexable inserts and accepts matching plates from standard suppliers such as Ingersoll Does the tool head support through-tool coolant? Yes — the head features internal coolant channels to supply cutting zones and improve wear resistance What fastening hardware is required for insert clamping? Clamping uses M3.5x8.5 Torx screws tightened with a Torx T10 key for secure and repeatable insert retention Is the head suitable for compact lathes and tight setups? The compact overall length of 40 mm and modest weight (0.412 kg) make it suitable for confined setups where reduced overhang is required Who manufactures this tool head and what is the SKU? The head is manufactured by Teknik Makina and supplied under SKU T966-3TM Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
52mm Face Cutter Head for BLMP 0904 Indexable Inserts 6 Cutting Edges, 100° Cutting Angle, 22mm Shank - Teknik Makina
Take advantage of a compact, high-precision milling solution that combines economical insert use with stable mounting and reliable repeatability; the T486TM face-milling head accepts BLMP 0904 indexable inserts and delivers consistent finishes with its 100° cutting angle — order directly via Metav Werkzeuge or consult the specialists for integration advice. Face-milling head T486TM — for BLMP 0904 indexable inserts, Ø52 mm The face-milling head T486TM is a compact cutter head designed for light to medium face milling and planing operations using BLMP 0904 indexable inserts, suited to standard machining centres and toolholders. For BLMP 0904 indexable inserts Ø52 mm cutter diameter 6 cutting edges for economical use 22 mm arbor bore for secure mounting Torx screw M3.5x8.5, key T10 High-performance cutting with economical insert use The cutter head is engineered for efficient material removal while keeping operating costs low. With 6 cutting edges and compatibility with BLMP 0904 indexable inserts, the design enables multiple index rotations before replacement, reducing tooling expenditure and downtime. The 100° cutting angle promotes a smooth cut and improved surface finish, especially on broad face operations. The insert seat geometry is optimised to ensure repeatable seating and stable chip evacuation, which translates into predictable cycle times and a reduced risk of premature insert wear. Stable mounting and precise alignment for reproducible results Mechanical stability is achieved through a 22 mm arbor bore and a compact overall form factor (Ø52 mm, total length 50 mm). This configuration provides a rigid connection to the spindle and minimises run-out, allowing tight tolerances to be maintained across production batches. Assembly and clamping are straightforward: fastening is via a M3.5x8.5 Torx screw tightened with a T10 key, enabling reliable clamp forces without complex tooling. The head’s modest mass (0.427 kg) reduces spindle load while preserving cutting stability, which is beneficial for machines with restricted power or for higher-speed finishing operations. Flexible compatibility and practical workshop integration The head is specified for indexable inserts made by recognised manufacturers such as Taegutec, ensuring broad supply availability and interchangeability. Its compact diameter and controlled overhang make it suitable for face milling, light shoulder cuts and finishing passes where accessibility matters. The modular nature of the insert system simplifies inventory: by stocking BLMP 0904 inserts, a workshop can service multiple cutter heads and adapt to varying materials and cutting tasks. Technical terms: an indexable insert is a replaceable carbide cutting element; indexable systems allow rotation to a fresh edge rather than full regrinding, which reduces cost per edge and simplifies tool maintenance. Discuss application requirements with Metav Werkzeuge for optimal setup of the T486TM face-milling head and secure compatibility checks or delivery from Emmerich — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: T486TM Article name: Face-milling head (Planmesserkopf) Manufacturer: Teknik Makina Facts Diameter: 52 mm Bore (arbor): 22 mm Total length: 50 mm Weight: 0.427 kg Cutting angle: 100° Cutting edges: 6 Special features For BLMP 0904 indexable inserts Compatible with Taegutec inserts Torx screw: M3.5x8.5 Torx key size: T10 FAQ What inserts fit this milling head? The face-milling head T486TM is designed for BLMP 0904 indexable inserts and is compatible with inserts from manufacturers such as Taegutec. How is the head mounted to the spindle or arbor? A 22 mm arbor bore is provided for secure mounting; the head is fastened with a M3.5x8.5 Torx screw using a T10 key to ensure stable clamping. What size and type of work is this head best suited to? The head’s Ø52 mm diameter and 100° cutting angle make it appropriate for face milling, light planing and finishing passes on general workshop materials. How many cutting edges are available per head configuration? The T486TM configuration provides 6 cutting edges via the indexable insert system, allowing economical edge rotation before replacement. Is the component weight relevant for spindle selection? The head weighs 0.427 kg, which helps keep spindle load moderate and is suitable for machines with limited power while maintaining cutting stability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
52mm Face Mill For RDMT 12T3 Indexable Inserts, 5 Cutting Edges, 22mm Shank - Teknik Makina
Take advantage of a compact milling solution that combines precise indexable insert compatibility with robust mechanical fixing for consistent chip control and long tool life; ideal for medium-duty milling tasks in production and repair shops. Order the tool directly via Metav Werkzeuge or consult the technical advisers for application-specific recommendations. Round Insert Cutter T667TM — for RDMT 12T3 indexable inserts, Ø52 mm The Round Insert Cutter T667TM is a rotary milling head designed for stable face and light shoulder milling using RDMT 12T3 indexable inserts, suited to general metalworking and toolroom applications. Ø52 mm cutting diameter For RDMT 12T3 indexable inserts Five cutting edges for steady material removal 22 mm shank diameter, compact 0.403 kg weight High material removal with controlled stability The mill head is engineered to deliver efficient machining while keeping vibration in check. The Ø52 mm diameter together with the five cutting edges allows for relatively high feed per tooth without sacrificing surface quality, which contributes to a reliable cycle time. For shops replacing brazed cutters, the use of RDMT 12T3 round inserts provides repeatable cutting geometry and predictable wear behaviour, simplifying process control and reducing downtime. Robust clamping and service-friendly screw system Secure insert retention is achieved with standardised fastening components specified in the data. The cutter uses M4x10 Torx screws and a T15 key for repeatable tightening torque, while the locking screw is M3.5, enabling safe clamping of the inserts under typical milling loads. These familiar fasteners make insert changes straightforward for trained staff and reduce the risk of incorrect torque compared with non-Torx systems, thereby supporting consistent machining results. Compact interface for common toolholders The tool is supplied with a 22 mm toolholder interface and a compact overall length of 50 mm, which helps maintain rigidity in short-overhang setups and improves accessibility in confined fixtures. Its mass of 0.403 kg keeps the spindle load modest, allowing quick acceleration and steady rotation in many bench and CNC machines. The compact dimensions are an advantage in demanding fixture layouts where clearance and stiffness are decisive. Compatibility and practical workshop benefits Designed for use with Palbit-manufactured inserts and identified as compatible with RDMT 12T3, the cutter supports a wide range of grades and chipbreaker geometries available on the market. This flexibility aids process optimisation across steels and non-ferrous materials when appropriate insert grades are selected. The combination of standardised screws and commonly stocked insert formats reduces the need for special inventory, streamlining supply management in the workshop. For tailored technical advice or to secure the Teknik Cutting Tools round insert cutter T667TM with RDMT 12T3 compatibility, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: T667TM Manufacturer: Teknik Makina Product name: Rundplattenfräser Designation (EN): for RDMT 12T3 Indexable Inserts eCl@ss: 21180902 ETIM: EC011860 Facts Diameter: 52 mm Number of cutting edges: 5 Overall length: 50 mm Shank diameter (D): 22 mm Weight: 0.403 kg Special features Compatible with Palbit inserts Fastening screw: M3,5 Torx screw: M4x10 Torx key size: T15 For RDMT 12T3 indexable inserts FAQ Which insert type fits this cutter? The cutter is designed for RDMT 12T3 indexable inserts; compatible grades from Palbit and other manufacturers can be used provided the insert format matches. What fastening hardware is required for insert changes? Insert retention uses an M3.5 locking screw together with M4x10 Torx screws tightened with a T15 key for secure and repeatable clamping. Is the tool suitable for compact fixture set-ups? Yes, the compact 50 mm overall length and 22 mm shank diameter make the cutter suitable for short-overhang arrangements where stiffness and clearance are essential. Can the cutter be used for abrasive or hard alloys? Material suitability depends on the chosen insert grade; the cutter accepts RDMT 12T3 inserts, so selecting an appropriate grade for hardened or abrasive materials is recommended. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
52mm Face Mill for RDMT 1604 Indexable Inserts With Internal Coolant, 4 Cutting Edges - Teknik Makina
Take advantage of a compact tooling solution that combines a 52 mm diameter, internal coolant and compatibility with RDMT 1604 indexable inserts for reliable, repeatable milling cycles; order via Metav Werkzeuge or consult the technical team for application advice. Round Insert Milling Head for RDMT 1604 Indexable Inserts – 52 mm, Internal Coolant (Teknik Makina) The Round Insert Milling Head is a compact face‑milling solution designed for CNC and machining centres using RDMT 1604 indexable inserts, offering internal coolant and a short overall length for confined setups. 52 mm diameter for compact tool setups Internal coolant to the cutting edge Compatible with RDMT 1604 indexable inserts Four cutting edges for stable material removal High removal rates from a compact tool The tool’s 52 mm diameter and L50 mm overall length are engineered to provide efficient material removal in space‑restricted fixtures. Using RDMT 1604 indexable inserts allows for rapid index changes and consistent cutting geometry, which reduces non‑productive time and tooling cost per cut. The arrangement of 4 cutting edges yields balanced engagement and smoother load distribution, translating into predictable cycle times on medium‑duty milling operations. For shops seeking to standardise holders and inserts, this head delivers straightforward integration without complex adaptation. Internal coolant for improved tool life and surface quality Coolant delivered through the body directly to the insert seat supports controlled temperatures at the cutting zone; the internal coolant mechanism enhances chip evacuation and reduces built‑up edge formation. For processes where thermal stability affects tolerance or surface finish, this feature helps maintain consistent part quality across shifts. The head uses a secure fastener system with T15 Torx drive and M4x10 screws, ensuring repeatable clamping torque and reliable coolant passage to the insert pockets. Quick serviceability and secure assembly Maintenance routines are simplified by the indexable design and standardised fastening: insert changes use the T15 key and M4x10 screws, reducing downtime during tool service. The tool’s low mass (0.35 kg) eases handling when mounting or balancing multi‑cutter arrangements and contributes to faster changeovers at the machine. Clear access to the screwheads and a conventional clamping concept make insert replacement and inspection efficient for trained operators, lowering the risk of assembly errors. Reliable choice for versatile face‑milling tasks Designed by Teknik Makina as a compact face milling head, this tool supports routine milling where a short overhang and focused coolant supply are advantageous. The compatibility with standard RDMT 1604 indexable inserts allows workshops to choose grades and geometries tailored to their cutting strategy while keeping insert inventory aligned across similar tool families. The combination of compact geometry, coolant delivery and standard fasteners makes this head a pragmatic option for production environments that prioritise repeatability and easy servicing. Discuss the suitability of the Teknik Makina round insert milling head with Metav Werkzeuge’s specialists or place an order via Metav Werkzeuge for delivery from Emmerich – eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data SKU: T271-1TM Label: 52 mm round insert milling head for RDMT 1604, L50 mm, internal coolant Manufacturer: Teknik Makina Facts Diameter: 52 mm Overall length: 50 mm Weight: 0.35 kg Number of cutting edges: 4 Screw: M4x10 Torx key: T15 Compatible inserts: RDMT 1604 Special features Internal coolant to the insert seat Indexable insert system Face milling head design Manufacturer SKU: T271-1TM FAQ Is this head compatible with RDMT 1604 inserts? Yes. The head is designed specifically for RDMT 1604 indexable inserts and accepts standard insert geometries for that designation. Can the internal coolant be used with standard coolant supply lines? The internal coolant channel is integrated into the head body and is intended to be supplied from the machine’s coolant feed to deliver fluid directly to the insert seat. What fasteners are used to secure the inserts? Inserts are retained using M4x10 screws driven with a T15 Torx key; this provides a reliable clamping interface and repeatable torque handling. Is the tool suitable for confined or short‑overhang set‑ups? Yes. The compact 52 mm diameter and L50 mm overall length make it well suited to operations with limited clearance or reduced overhang requirements. How does the indexable design affect maintenance intervals? Indexable inserts allow worn edges to be rotated or replaced without removing the entire head, reducing downtime and lowering consumable costs compared with solid cutters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
52mm Face Mill For RDMT 1604 Indexable Inserts, 4 Cutting Edges, 22mm Shank - Teknik Makina
Take advantage of the combination of precise indexable-insert compatibility, compact design and simple insert replacement for shortened downtimes; order the milling cutter directly via Metav Werkzeuge or ask our consultants for technical advice. Rundplattenfräser T271TM — indexable-insert face mill, Ø52 mm, Teknik Makina The Rundplattenfräser T271TM is a compact indexable-insert face mill intended for finishing and light roughing with RDMT 1604 inserts in CNC and manual milling operations Ø52 mm diameter for tight machining 4 cutting edges for smooth finishes 22 mm shank for secure toolholder fit Compact 50 mm overall length for constrained spaces Faster cycle times with consistent surface quality The cutter’s Ø52 mm diameter combined with its 4 cutting edges enables steady material removal and a fine surface finish on interrupted and continuous cuts. Using standard RDMT 1604 indexable inserts reduces dwell time: inserts can be rotated or replaced quickly without regrinding. For production environments this means shorter non-productive intervals and more consistent part geometry, which directly supports predictable cycle times and improved process repeatability. Robust clamping and fast insert changes reduce downtime A 22 mm tool shank ensures reliable seating in common toolholders, supporting stable machining even at higher feed rates. The tool secures inserts with a M4x10 locking screw and a M4.5x11 Torx screw (Torx key T20), making insert changes straightforward and reproducible. The clear interface between cutter body and insert pocket minimises the risk of misalignment, which prolongs insert life and reduces the frequency of tool-setting operations. Compact design for versatile machine use With a total length of 50 mm and a mass of 0.35 kg, the milling head is engineered for situations where toolchanger clearance or fixture proximity is limited. The compact envelope allows closer approach to fixturing and simpler toolpath planning, while the relatively low mass contributes to lower spindle load during acceleration. This design suits job-shop environments and CNC cells where flexibility and space efficiency are priorities. Industry compatibility and traceable specification The milling head is specified for the widely used RDMT 1604 insert format, ensuring easy sourcing of consumables and predictable wear behaviour. Relevant classification codes are recorded for procurement systems: eClass 21180902 and ETIM EC011860, which support clear parts management across ERP systems. The cutter’s defined fastening and interface dimensions simplify integration into existing tool inventories and maintenance routines. For procurement or technical clarification on Teknik Makina indexable face mills, contact Metav Werkzeuge for ordering and application support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T271TM Manufacturer: Teknik Makina Product name: Rundplattenfräser For inserts: RDMT 1604 Indexable Inserts eClass: 21180902 ETIM: EC011860 Facts Diameter: 52 mm Number of cutting edges: 4 Overall length: 50 mm Shank / mounting diameter: 22 mm Weight: 0.35 kg Locking screw: M4x10 Torx screw: M4.5x11 Torx key size: T20 Special features U-plate designation: BSP010 Compatible with RDMT 1604 insert format Compact design for limited tool clearance FAQ Which insert type fits this cutter? The cutter accepts RDMT 1604 indexable inserts; RDMT 1604 inserts provide quick indexing and are widely available for different grades and chipbreakers. What are the key dimensions to check for toolholder compatibility? Check the 22 mm shank diameter and the 50 mm overall length to confirm seating and clearance in the chosen toolholder; the cutter’s Ø52 mm cutting diameter determines the required toolpath offsets. How are the inserts secured and changed? Inserts are secured with a M4x10 locking screw and a M4.5x11 Torx screw; a T20 Torx key is used for tightening and removal to ensure consistent clamping torque. Is this cutter suitable for finishing and roughing? The tooling is intended primarily for finishing and light roughing operations using RDMT 1604 inserts; machining parameters should be adapted to the specific material and insert grade. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
52mm Face Milling Head for BLMP 0603 Indexable Inserts L50mm With Internal Coolant - Teknik Makina
Take advantage of the combination of precision, secure clamping and internal coolant for stable, high-feed face milling — order directly via Metav Werkzeuge or consult our technical team for application-specific advice. Face milling head for BLMP 0603 indexable inserts — 52 mm diameter, internal coolant (Teknik Makina) A face milling head for BLMP 0603 indexable inserts designed for robust face milling operations where coolant-fed cutting and compact overall length support consistent surface quality. 52 mm cutting diameter Internal coolant supply Compatible with BLMP 0603 inserts Robust design with 7 cutting edges Coolant-controlled cutting for higher process stability The internal coolant channel delivers coolant directly to the cutting zone, reducing cutting temperature and improving chip evacuation. This lowers tool wear and supports longer service intervals, which in turn increases process uptime and reduces total machining cost. Designed for industrial use, the face milling head facilitates consistent heat management during continuous cycles and helps to maintain repeatable results across batches. Compact, rigid construction for consistent surface finish A compact overall length of 50 mm combined with a 52 mm diameter and a mass balanced layout deliver reduced vibration and stable cutting conditions. The arrangement of 7 cutting edges provides multiple indexing positions before replacement, allowing sustained material removal rates and fewer tool changes. The result is improved surface finish and dimensional consistency on series parts, especially where repeatability is essential. Fast insert changes and secure fastening to cut downtime Insert clamping and fastening use standard hardware for quick servicing: Torx T8 key engagement and M3x6.2 Torx screws ensure secure retention and straightforward replacement of the BLMP 0603 indexable inserts. The cutter body is supplied ready for Taegutec-compatible inserts, simplifying procurement and reducing setup complexity. Lightweight yet rigid, the tool body supports efficient handling while maintaining the clamping integrity required for productive machining. For tailored procurement or application advice on Teknik Makina face milling solutions, contact Metav Werkzeuge — Metav’s Emmerich location combines extensive stock and technical expertise to ensure the right tool reaches the workshop quickly; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T482-1TM Product: Face milling head Model/label: 52 mm face milling head BLMP 0603 L50 mm with internal coolant Manufacturer: Teknik Makina Facts Diameter: 52 mm Overall length: 50 mm Mounting diameter: 22 mm Weight: 0.472 kg Cutting edges: 7 Cutting angle: 100° Special features Internal coolant supply For BLMP 0603 indexable inserts Compatible insert manufacturer: Taegutec Torx key: T8 Torx screw: M3x6.2 eClass: 21181015 UID: T482-1TM FAQ What insert type does this cutter use? The cutter is designed for BLMP 0603 indexable inserts and is compatible with Taegutec-manufactured inserts, enabling straightforward procurement and interchangeability. Is the tool coolant-fed and what benefit does that bring? Yes — the internal coolant channel supplies coolant directly to each cutting edge, which improves chip control, reduces thermal wear and extends the usable life of the inserts. What fastening hardware is required for insert replacement? Insert retention uses a Torx T8 key and M3x6.2 Torx screws for secure clamping and quick servicing of the BLMP 0603 inserts. What are the main dimensions and balance considerations? Key dimensions include a 52 mm cutting diameter and 50 mm overall length; the compact design and balanced construction provide reduced vibration for consistent surface quality. Who manufactures this face milling head and how is it identified? The tool is supplied by Teknik Makina and is listed under SKU T482-1TM for ordering and identification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
52mm Face Milling Head For BLMP 0904 Indexable Inserts L50mm With Internal Coolant - Teknik Makina
Combining a compact 52 mm cutting diameter with internal coolant and secure Torx clamping, this face milling head provides reliable finishing performance for BLMP 0904 indexable inserts; order directly via Metav Werkzeuge or consult our specialists for application advice. Face milling head T486-1TM — 52 mm diameter, internal coolant (Teknik Makina) T486-1TM is a compact face milling head designed for BLMP 0904 indexable inserts, offering a short overall length and coolant-fed cutting for consistent surface quality. 52 mm cutting head diameter Internal coolant for improved chip evacuation Holds BLMP 0904 indexable inserts Compact 50 mm overall length High-performance finishing from a compact cutter body The compact face milling head combines a 52 mm diameter with a 100° cutting angle and six cutting edges, creating a tool geometry optimised for stable contact and consistent finishing. Fit with BLMP 0904 indexable inserts, the cutter body allows predictable load distribution across the inserts, which reduces vibration and supports uniform surface results. The design is aimed at production and job-shop environments where repeatable quality and short setup times are priorities. The included fastening specification ensures secure seating and reliable torque transmission for daily machining cycles. Coolant-fed clamping for longer insert life and cleaner chips Built-in internal coolant channels supply cutting fluid directly to the insert pocket to aid cooling and chip control. This targeted coolant feed helps reduce the risk of built-up edge and supports longer tool life without complex retrofit work. The milling head uses a 22 mm mounting interface for stable spindle connection and employs T10 Torx drive geometry with M3.5x8.5 screws for simple and robust clamping. As a result, insert changes are fast and the cutter maintains alignment under load, helping to preserve tolerances and minimise rework. Compact dimensions and workshop-friendly handling With an overall length of 50 mm and a lightweight construction at approximately 0.427 kg, the cutter is easy to handle and suits tight setups or multi-axis machines where space is limited. The short projection reduces bending moments and supports higher dimensional accuracy at the cutting zone. Maintenance routines remain straightforward thanks to standardised Torx screws and widely available BLMP 0904 inserts from suppliers such as Taegutec, making the tool practical for both small batch work and continuous production runs. The robust, service-oriented design supports dependable performance across varied schedules. Contact Metav Werkzeuge for compatibility checks and tailored application guidance on the Teknik Makina T486-1TM face milling head; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: T486-1TM Manufacturer: Teknik Makina Product type: Face milling head Compatible inserts: BLMP 0904 Compatible insert supplier: Taegutec Facts Cutting head diameter: 52 mm Overall length: 50 mm Weight: 0.427 kg Mounting diameter: 22 mm Number of cutting edges: 6 Cutting angle: 100° Special features Internal coolant: yes Torx key size: T10 Torx screw: M3.5x8.5 ECLASS: 21181015 FAQ Which indexable inserts fit this milling head? The face milling head accepts BLMP 0904 indexable inserts; inserts from Taegutec are specified as compatible with the T486-1TM cutter. Is the cutter supplied with internal coolant? Yes — the cutter body includes internal coolant channels to deliver cutting fluid directly to the insert zone, improving chip evacuation and thermal control. What is the mounting interface for the cutter? The milling head uses a 22 mm mounting diameter for spindle or arbor attachment, providing a compact and stable connection. How many inserts does the head accommodate and what is the cutting angle? The head is configured for six cutting edges and a 100° cutting angle, which supports stable face milling and consistent surface finishes. What fastening hardware is required for insert clamping? Clamping is achieved with T10 Torx drive screws; the specified screw size is M3.5x8.5, enabling secure and service-friendly insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
52mm Face Milling Head for SDMT 1204 Indexable Inserts 45° Cutting Angle, L40mm - Teknik Makina
Benefit from a compact, high-performance tool that combines a 52 mm diameter, four cutting edges and a 45° cutting angle to deliver stable face milling with SDMT 1204 inserts; order directly via Metav Werkzeuge or consult our specialists for integration and stocking advice. Face milling head T358-2TM – 52 mm diameter, for SDMT 1204 indexable inserts (Teknik Makina) The Face milling head for SDMT 1204 indexable inserts is a short, robust tool body engineered for dependable face milling and finishing operations in general machining environments 52 mm diameter for broad coverage Compatible with SDMT 1204 inserts Four cutting edges for longer service 45° cutting angle for smooth chip flow Consistent compatibility reduces setup time The milling head is built to accept SDMT 1204 indexable inserts and aligns with common ZCC geometries, which simplifies tool selection and reduces setup complexity. Paying attention to standard insert formats means fewer special orders and faster changeovers on the shop floor. The result is consistent cutting behaviour and predictable process parameters, allowing production planning to rely on repeatable cycle times. Precision and repeatability for reliable finishes A 45° cutting angle combined with four cutting edges gives a balance between cutting stability and surface quality. The geometry minimises vibration and distributes cutting forces evenly across the tool body, which improves component finish and extends insert life. With a 52 mm diameter and compact 40 mm overall length, the design supports controlled engagement for both finishing and light roughing tasks while maintaining a reliable run-out performance. Fast maintenance and secure fastening for minimal downtime Secure clamping is achieved with M4x10 Torx screws tightened with a T15 drive, enabling swift insert swaps and consistent torque application. The straightforward fastening system reduces the risk of incorrectly seated inserts and lowers maintenance time between operations. As a result, the milling head supports higher machine uptime and simpler spare-part handling in maintenance routines. Ready-to-stock design that streamlines procurement The tool body (SKU T358-2TM) is compact and lightweight at approx. 0.381 kg, which simplifies storage and handling and allows efficient stocking across multiple workstations. Sourcing through Metav aligns supply with quality control: orders are fulfilled from Emmerich with an emphasis on verified parts and consistent availability, helping workshops and trade customers reduce supplier fragmentation and secure dependable deliveries. For supply or technical advice on Teknik Makina’s 52 mm face milling head (T358-2TM) contact Metav Werkzeuge in Emmerich for tailored procurement and integration guidance — info@metav-werkzeuge.com, +49 2822 7131930 Technical data SKU: T358-2TM Manufacturer: Teknik Makina Product type: Face milling head Label: 52mm Planmesserkopf SDMT 1204 L40mm Key specifications Diameter: 52 mm Overall length: 40 mm Shank / mounting diameter: 22 mm Weight: 0.381 kg Cutting edges: 4 Cutting angle: 45° Fastening screw: M4x10 Drive: Torx T15 Compatibility & features For SDMT 1204 indexable inserts Compatible with ZCC insert geometries Compact design for stable engagement Torx fastening for repeatable clamping FAQ Which insert type fits this milling head? The milling head accepts SDMT 1204 indexable inserts; compatibility with common ZCC geometries ensures straightforward insert procurement. What is the tool’s diameter and suitable application? The 52 mm diameter and 45° cutting geometry make the head suitable for face milling operations that require stable engagement and good surface finish. How are inserts secured to the tool body? Inserts are clamped using M4x10 Torx screws tightened with a T15 drive, which supports quick and repeatable insert changes. Is the SKU useful for reorders and stock management? Yes — the SKU T358-2TM identifies the compact face milling head for streamlined ordering and inventory control. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
52mm Face Milling Head For SDMT 1204 Indexable Inserts L40mm With Internal Coolant - Teknik Makina
Compact, efficient machining with a small footprint: the combination of a 52 mm diameter, a 45° cutting angle and four cutting edges ensures stable face milling and reduced cycle times. Integrated coolant support extends tool life and improves surface finish. Order the face milling head directly via Metav Werkzeuge or ask our consultants if needed. Face milling head for SDMT 1204 indexable inserts — 52 mm, internal coolant (Teknik Makina) Face milling head for SDMT 1204 indexable inserts designed for compact, precise material removal in CNC and turning-milling centres. Face milling head for SDMT 1204 inserts 52 mm diameter for compact operations Internal coolant supply for heat control Compatible with ZCC indexable inserts Faster cycles through compact, powerful cutting The small-diameter milling head combines a 52 mm body with a 45° cutting angle to deliver efficient material removal while reducing spindle load. Fitted for SDMT 1204 indexable inserts and providing 4 cutting edges, this configuration shortens toolpaths and minimises changeover frequency—benefits that translate directly into higher throughput on batch and jobbing work. The geometry supports stable chip evacuation and consistent surface quality on each pass. Cooler cutting for longer tool life and better finishes Built-in internal coolant directs fluid precisely to the insert pocket and cutting zone, lowering temperatures and flushing chips away from the cutting edge. Reduced thermal stress and clearer cutting zones slow wear progression, which results in longer insert life and fewer interruptions for maintenance. For operations that demand repeatable surface condition and tight process windows, the coolant provision is a decisive advantage for sustained productivity. Secure clamping and quick insert handling The cutter head is secured with M4x10 Torx screws tightened using a T15 Torx key, enabling fast, repeatable insert changes and a consistently secure clamp force. Compatibility with ZCC manufactured inserts provides flexibility when choosing grades for ferrous or non-ferrous work, while the modest mass (0.379 kg) and an overall length of 40 mm make handling and toolset balancing easier during setup and tool changes. Compact mounting for versatile machine integration A 22 mm mounting diameter allows installation on compact toolholders and multi-tasking turrets, making this head suitable for small to medium machine tools where space and clearance are limited. The construction supports precise indexing and concentricity, which is advantageous for finishing passes and mixed-material batches. Supplied by Teknik Makina and identified as SKU T358-3TM, the unit is a practical choice for workshops aiming to improve flexibility without compromising process reliability. For precise, compact face milling solutions from Teknik Makina, contact Metav Werkzeuge for ordering details or technical compatibility checks—eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss your application and logistics. Technical data SKU: T358-3TM Manufacturer: Teknik Makina Product type: Face milling head Facts Diameter: 52 mm Overall length: 40 mm Weight: 0.379 kg Mounting diameter: 22 mm Cutting angle: 45° Cutting edges: 4 Special features Internal coolant For SDMT 1204 indexable inserts Compatible with ZCC inserts Torx key: T15 Torx screw: M4x10 FAQ Which inserts fit this milling head? The face milling head accepts SDMT 1204 indexable inserts and is compatible with ZCC insert manufacturers; choose the grade appropriate for the workpiece material and machining strategy. Does the head provide coolant to the cutting zone? Yes, the unit features internal coolant that delivers fluid directly to the insert pockets, improving cooling and chip evacuation during cutting. What mounting diameter is required? The milling head uses a 22 mm mounting diameter for attachment to compatible toolholders and turrets. How many cutting edges are active on the head? The head is designed for 4 cutting edges, enabling balanced cutting and efficient material removal per revolution. Which fastening hardware and tool are needed for insert changes? Insert pockets are secured with M4x10 Torx screws tightened using a T15 Torx key for quick and secure insert replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
52mm Face Milling Head for SDNW 1205 Indexable Inserts L50mm Internal Coolant - Teknik Makina
Take advantage of a compact, productivity-focused milling solution that combines a 52 mm diameter, internal coolant and compatibility with SDNW 1205 indexable inserts for shorter cycle times and reliable surface finish; order the head directly via Metav Werkzeuge or consult our specialists for application support. Face milling head (Planmesserkopf) for SDNW 1205 — 52 mm, internal coolant — Teknik Makina The face milling head is a compact, internally cooled cutter head designed for light to medium-duty face milling using SDNW 1205 indexable inserts; ideal where space is limited but process stability remains essential. Compatible with SDNW 1205 indexable inserts 52 mm diameter for compact face milling Internal coolant for enhanced chip evacuation Five cutting edges; L50 mm overall length Increased productivity from compact, targeted design The compact diameter and controlled geometry prioritise material removal where it matters. With a 52 mm diameter and five cutting edges, the head shortens non-cutting times while maintaining consistent engagement for face operations. The 90° cutting angle delivers a square shoulder finish and predictable cutting forces, which helps stabilise feed rates and reduce vibration. Specified for SDNW 1205 inserts, the configuration allows the use of proven insert grades from recognised manufacturers, enabling a clear performance comparison and straightforward tool selection. The combination of compact form and defined insert compatibility supports higher spindle speeds or tighter tool spacing where multiple heads are used on the same spindle. Better chip control and process reliability through internal coolant Internal coolant is built into the design to improve chip evacuation and extend insert life in continuous cycles. The internal coolant channel directs coolant close to the cutting edge, aiding lubrication and heat dissipation so that the insert maintains sharper cutting geometry for longer. This reduces the frequency of index changes and contributes to a more predictable tool lifecycle, which in turn simplifies production planning. The head is secured with an M4x10 Torx screw and requires a T15 Torx key, enabling fast, repeatable clamp-up and straightforward maintenance during shift changes. With an overall length of L50 mm and a mass of approximately 0.378 kg, the unit is easy to handle and integrates without significant balance disruption on standard toolholders. Simple installation, dependable serviceability and supply continuity Mounting and service are kept efficient: a single Torx fastener and compatible insert pocket geometry mean quick insert replacement and reduced downtime. The robust construction supports repeated index changes and routine handling in busy workshop environments. Compatibility with inserts from Hitachi ensures access to a wide range of grades for different materials and cutting conditions, while standard fastening hardware limits the need for special tools. For buyers focused on reliable sourcing, Metav Werkzeuge offers steady availability from Emmerich and product support that links practical application knowledge with secure European distribution, helping to streamline procurement and reduce supplier complexity. Contact Metav Werkzeuge for tailored application advice on the Teknik Cutting Tools face milling head T383TM and for current stock information — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: T383TM Product type: Planmesserkopf Brand: Teknik Makina Compatible inserts: SDNW 1205 Inserts manufacturer: Hitachi Facts Diameter: 52 mm Overall length: 50 mm Weight: 0.378 kg Cutting edges: 5 Cutting angle: 90° Special features Internal coolant Torx key: T15 Torx screw: M4x10 SKU: T383TM FAQ Which inserts fit this milling head? The milling head accepts SDNW 1205 indexable inserts; Hitachi insert grades are commonly used with this head for a range of finishes and workpiece materials. Is the head suitable for wet machining? Yes — the head features internal coolant, which guides coolant directly to the cutting zone for improved lubrication and chip control during wet operations. What fastening hardware is required for insert changes? Insert clamping uses an M4x10 Torx screw, tightened with a T15 Torx key for consistent, repeatable securement. Can the head be used for shoulder milling and light facing? The 90° cutting angle and compact form make the head appropriate for square-shoulder milling and light face operations where a compact cutter is beneficial. How does the head help reduce downtime? Quick insert changes, standard Torx fastening and compatibility with widely available SDNW 1205 inserts reduce changeover time and simplify spare-part inventories. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
52mm Face Milling Head for SOET 13 Indexable Inserts L45mm Internal Coolant, 4‑Cutters, 90° - Teknik Makina
The combination of a compact 52 mm diameter, internal coolant and compatibility with SOET 13 indexable inserts ensures consistent face-milling performance and simple insert changes. Order the planing cutter head directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Planing cutter head for SOET 13 indexable inserts — 52 mm, internal coolant (Teknik Makina) The Planing cutter head is designed for face milling with SOET 13 indexable inserts and is intended for compact, high-precision finishing and semi-roughing operations in small- to medium-sized workshops. 52 mm diameter for compact machining Internal coolant for improved chip evacuation Compatible with SOET 13 Palbit inserts Four cutting edges, 90° cutting angle Consistent results from compact design and insert compatibility The compact 52 mm diameter design provides a stable, space-saving solution for machining faces where tool access is restricted. Compatibility with SOET 13 indexable inserts keeps operating costs predictable: worn edges are replaced rather than the entire tool, maintaining productivity while reducing tooling downtime. Indexable inserts are small, reversible cutting elements that simplify maintenance and inventory control, delivering a fast return to production after a changeover. Longer cutting life and improved surface quality through internal coolant Integrated internal coolant channels direct cutting fluid precisely to the cutting zone, which reduces heat at the cutting edge and improves chip evacuation. The result is extended insert life and a more consistent surface finish under load. For materials prone to built-up edge or thermal sensitivity, internal coolant supports higher stable cutting parameters and helps keep cycle times down without compromising component quality. Secure clamping and reliable fastenings for vibration control A robust fastening system with T15 Torx drive and M3.5×8.5 screws ensures stable clamping of the inserts during interrupted cuts and heavier passes. The combination of four cutting edges and a 90° cutting angle produces uniform loading on each insert, reducing vibration and run-out. This mechanical reliability translates directly into improved dimensional accuracy and repeatability on milled faces. Practical fit for everyday workshop use With an overall length of 45 mm and a mass near 0.401 kg, the head is easy to handle and suits operations seeking a balance between rigidity and manoeuvrability. Compatibility with Palbit-supplied SOET 13 inserts broadens sourcing options while retaining performance standards. The compact face-milling solution is suitable for finish machining and medium-material-removal-rate tasks where quick insert changes and coolant-fed operation are decisive advantages. For tailored technical advice on the Teknik Makina face milling head (SKU T638TM) and to confirm compatibility for specific machines or materials, contact Metav Werkzeuge’s technical team for direct assistance and supply coordination. Technical data SKU: T638TM ECLASS: 21181015 Manufacturer: Teknik Makina Numeric specifications Diameter: 52 mm Overall length: 45 mm Weight: 0.401 kg Cutting edges: 4 Cutting angle: 90° Screw: M3.5×8.5 Torx key: T15 Features / Compatibility Internal coolant For SOET 13 indexable inserts Compatible with Palbit inserts Face milling application Product type: Planing cutter head FAQ Is this head compatible with SOET 13 inserts from other manufacturers? Compatibility is confirmed for SOET 13 geometry; the head accepts inserts from Palbit and other manufacturers producing the same SOET 13 specification, provided insert seating and clamping match the indexable insert geometry. Can the internal coolant be used on all machine types? The internal coolant feature requires a machine-side coolant supply; the planing cutter head supports coolant-fed operation when connected to a suitable internal coolant line on the spindle. What advantages does a 90° cutting angle provide for face milling? A 90° cutting angle delivers a square shoulder and reduces radial forces, improving surface finish and dimensional control on face-milled components with the planing cutter head. How many cutting edges are available before inserts need replacement? The head uses indexable inserts with four usable cutting edges per insert; rotating or replacing inserts restores cutting performance without replacing the entire head assembly. Which Torx key is required for insert changes? Insert fastening uses a T15 Torx drive with M3.5×8.5 screws for reliable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
52mm Planing Cutter Head for BLMP 0603 Indexable Inserts, 100° Cutting Angle, 7 Inserts, 50mm Overall Length - Teknik Makina
Take advantage of a compact face milling solution that pairs a 52 mm cutting diameter with a 100° cutting angle for consistent surface finish; the head accepts BLMP 0603 indexable inserts and secures with an M3x6.5 screw for reliable clamping. Combine precise cutting geometry and quick insert changes for shorter setup times — order the head directly via Metav Werkzeuge or request application advice from our consultants. Face milling cutter head T482TM — for BLMP 0603 indexable inserts, 52 mm diameter (Teknik Makina) The face milling cutter head T482TM is a compact milling head engineered for efficient face operations with BLMP 0603 indexable inserts, suited to production environments that demand repeatable surface quality and fast changeovers. For BLMP 0603 indexable inserts 52 mm cutting diameter 7 cutting edges for extended tool life 22 mm toolholder attachment Precision performance for repeatable face milling The milling head delivers a 52 mm cutting diameter combined with a 100° cutting angle, engineered to produce even chipflow and a stable cutting engagement. This geometry reduces vibration at the cut edge and promotes a consistent surface finish on the workpiece, which means fewer rework operations. With 7 cutting edges on the circumference, the design distributes cutting forces and extends service intervals; the result is improved process uptime and predictable tool-life behaviour in short- and medium-run production. Fast setup and compatibility with standard inserts Designed for quick integration, the tool accepts BLMP 0603 indexable inserts and is compatible with Taegutec inserts that follow the same specification. The shank mates to a 22 mm toolholder, while the insert pocket is secured with an M3x6.5 screw and a Torx T8 drive for repeatable clamping torque and straightforward servicing. These characteristics minimise changeover time and simplify inventory management, as common insert sizes can be stocked across multiple cutter heads to reduce diversity on the shop floor. Built for balance and dependable workshop use At an overall length of 50 mm and a mass of 0.472 kg, the cutter head is compact and sufficiently rigid for stable rotation at typical milling speeds; its dimensions support good dynamic balance when mounted in a standard holder. The compact form factor reduces overhang and helps maintain concentricity, which lowers the risk of chatter and contributes to consistent dimensional accuracy. Together with standardised fastening and insert geometry, the assembly supports predictable machining results and easier process planning. For tailored technical guidance on integrating the Teknik Makina face milling cutter head T482TM into existing tooling systems, contact Metav Werkzeuge for application recommendations at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: T482TM Manufacturer: Teknik Makina Designation: face milling cutter head for BLMP 0603 indexable inserts Facts Diameter: 52 mm Overall length: 50 mm Attachment / shank diameter: 22 mm Weight: 0.472 kg Cutting edges: 7 Cutting angle: 100° Fastening screw: M3x6.5 Special features Compatible with BLMP 0603 indexable inserts Compatible with Taegutec inserts Torx key size: T8 Compact design for reduced overhang FAQ Which insert type does the cutter head accept? The face milling cutter head accepts BLMP 0603 indexable inserts; compatible Taegutec variants are supported by the same pocket geometry. What is the required toolholder diameter for mounting? Mounting requires a 22 mm toolholder attachment; the head's 22 mm interface ensures a secure fit and correct concentricity. How is the insert secured in the cutter head? Inserts are clamped with an M3x6.5 screw using a Torx T8 drive to provide repeatable clamping and straightforward replacement. Is the cutter head suitable for high-speed finishing passes? The combination of a 100° cutting angle and compact geometry supports stable finishing operations; balance and holder selection remain important for high-speed applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm 45° Face Milling Cutter For SEET R245 12T3 Indexable Inserts, 5 Teeth, 22mm Shank - Teknik Makina
Take advantage of the combination of reliable 45° cutting geometry and simple, secure mounting to improve cycle consistency in finishing operations; the head accepts SEET R245 12T3 indexable inserts and features a 22 mm shank for straightforward toolholder compatibility. Order the item directly via Metav Werkzeuge or consult the team for application advice. Planmesserkopf T435TM — 45° corner milling head with SEET R245 compatibility (Teknik Makina) A Planmesserkopf designed for precise 45° corner and face milling using SEET R245 12T3 indexable inserts in industrial turning and milling setups 45° cutting geometry for accurate corner milling Compatible with SEET R245 12T3 indexable inserts 22 mm shank for standard toolholders Torx screw M3.5x8.5 supplied (T15) Predictable corner geometry for consistent part quality The 45° cutting arrangement delivers a predictable engagement with the workpiece, reducing variation in corner radii and improving assembly fit. With the 45° cutting angle and support for SEET R245 12T3 indexable inserts, the head converts insert performance into repeatable surface results. Indexable inserts are replaceable cutting edges that allow fast restoration of cutting performance without regrinding; this lowers machining downtime and keeps tool costs controllable over long production runs. The combination of controlled geometry and replaceable inserts supports higher first-pass quality and fewer rework cycles. Fast integration with existing toolholders and straightforward clamping Designed for compatibility, the head uses a 22 mm shank for secure seating in common holders and a single Torx screw M3.5x8.5 (key size T15) for insert clamping and replacement. This simple interface reduces changeover complexity on the shop floor and shortens tool-change routines. The tool’s 63 mm diameter and balanced mass (approx. 0.815 kg) contribute to stable running at typical spindle speeds, helping to maintain surface finish while limiting vibration. Where modularity and quick servicing are priorities, this corner milling solution enables efficient interaction with standard clamping systems and established insert portfolios from recognised manufacturers. Engineered for repeatable shop-floor performance and low-maintenance operation Built for frequent insert changes and consistent cutting conditions, the milling head supports five cutting edges and a compact overall length of 50 mm, keeping the cutting forces well managed in finish operations. The accessible Torx fastening ensures secure retention and straightforward maintenance, while the head’s compatibility with insert suppliers such as Sandvik, XTC and ZCC broadens sourcing options. Backed by Metav’s quality filter in Emmerich, the component is offered with reliable logistics and technical support, helping procurement and production teams keep tool inventories lean without compromising on precision. Contact Metav Werkzeuge to discuss application suitability for the T435TM corner milling head, confirm compatibility with existing toolholders or to request a tailored supply recommendation from our specialists at the Emmerich site Technical data SKU: T435TM Manufacturer: Teknik Makina Product name: Planmesserkopf for SEET 12T3 R245 indexable inserts Suitable inserts: SEET R245 12T3 Compatible insert manufacturers: Sandvik, XTC, ZCC Cutting angle: 45° Shank diameter: 22 mm Diameter: 63 mm Overall length: 50 mm Number of cutting edges: 5 Weight: 0.815 kg Torx screw: M3.5x8.5 Torx key: T15 Core specifications Diameter: 63 mm Shank (aufnahme): 22 mm Overall length: 50 mm Cutting angle: 45° Number of cutting edges: 5 Weight: 0.815 kg Materials & compatibility Compatible with SEET R245 12T3 indexable inserts Supported insert manufacturers: Sandvik, XTC, ZCC Fastening hardware: Torx screw M3.5x8.5 (T15) Intended application: corner/face milling operations FAQ Which inserts fit this milling head? The head accepts SEET R245 12T3 indexable inserts; compatible brands listed for the T435TM include Sandvik, XTC and ZCC. What is the shank size and how is the insert secured? The T435TM features a 22 mm shank and the insert is secured with a Torx screw M3.5x8.5, tightened with a T15 key. Is the tool suitable for 45° corner milling tasks? Yes, the 45° cutting geometry has been designed for accurate corner and face milling, providing consistent engagement and repeatable corner radii. How many cutting edges and what are the key dimensions? The unit supplies 5 cutting edges, a 63 mm diameter and an overall length of 50 mm, with a mass of approximately 0.815 kg for stable operation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Planflächen schneller und präziser herstellen
Planfräser, auch als Planfräswerkzeug oder Stirnplanfräser bezeichnet, sind meist mit Wendeschneidplatten bestückte Trägerwerkzeuge für Fräsmaschinen. Sie ermöglichen das großflächige Abtragen von Material, das Planfräsen von Werkstücken auf Maß und die Erzeugung einer gleichmäßigen, planaren Oberflächenstruktur.
Wie das Planfräswerkzeug technisch wirkt und wann es unabdingbar ist
Ein Planfräswerkzeug arbeitet offen auf der Materialoberfläche, sodass Späne radial abgeführt werden. Bei Ausführungen ohne Innenkühlung erfolgt die Wärme- und Spanableitung über externe Kühlmitteldüsen oder zugeführte Druckluft; das ist bei vielen regulären Planfräsarbeiten ausreichend. Modelle mit Innenkühlung verfügen über integrierte Bohrungen und Kanäle, die Kühlschmierstoff oder Blasluft direkt an die Schneidkanten leiten. Diese gezielte Zufuhr verhindert thermische Überlastung, reduziert Aufbauschneidenbildung und spült Späne zuverlässig aus der Schnittzone – entscheidend bei schwerzerspanenden, klebenden Werkstoffen oder sehr großen Schnittbreiten.
Mehr Effizienz im Werkstattalltag durch gezielten Einsatz
- Reduziert Rüstzeiten durch modulare Bestückung mit Wendeschneidplatten und einfachem Plattenwechsel.
- Verbessert die Oberflächengüte durch gleichmäßige Spanabfuhr und, bei Bedarf, gezielte Innenkühlung.
- Erhöht die Standzeit der Werkzeuge, weil thermische Belastung und Aufbauschneidenbildung minimiert werden.
- Sorgt für konstante Maßhaltigkeit bei großflächigen Bearbeitungen dank stabiler Trägerwerkzeuge.
Metav als zuverlässiger Partner für Ihre Planbearbeitung
Metav steht für Demokratisierung der Präzision und kombiniert jahrzehntelange Fachkompetenz mit einem breiten Sortiment. Aus dem Lager in Emmerich liefert Metav als Qualitätsfilter ein Sortiment, das Werkstätten und Industrie mit technisch passenden Planfräsern versorgt. Mit über 48.000 zufriedenen Kunden und mehr als 250.000 Produkten bietet Metav die Auswahl und Verfügbarkeit, um die passende Ausführung — mit oder ohne Innenkühlung — für Ihre Bearbeitungssituation zu finden.
Kurz und prägnant
Ein Planfräser ist das zentrale Werkzeug, wenn große, ebene Flächen schnell, maßhaltig und mit hoher Oberflächenqualität herzustellen sind. Die Wahl zwischen ohne Innenkühlung und mit Innenkühlung richtet sich nach Werkstoff, Schnittbreite und Wärmeentwicklung.
FAQ
Wann ist ein Planfräser mit Innenkühlung erforderlich?
Bei schwerzerspanenden oder stark wärmeentwickelnden Werkstoffen sowie bei sehr großen Schnittbreiten empfiehlt sich ein Planfräser mit Innenkühlung, weil die gezielte Kühlschmierstoffzufuhr thermische Überlastung und Aufbauschneidenbildung verhindert.
Reicht bei normalen Stahlblechen ein Planfräswerkzeug ohne Innenkühlung aus?
Für viele reguläre Planfräsarbeiten an unlegierten und niedrig legierten Stählen ist ein Planfräswerkzeug ohne Innenkühlung ausreichend, da Späne offen radial abfließen und externe Kühlmitteldüsen oder Druckluft die Wärmeableitung übernehmen.
Wie verlängert man die Standzeit von Planfräsern effektiv?
Die Standzeit eines Planfräswerkzeugs lässt sich durch passende Wendeschneidplatten, richtige Schnittparameter, konsequente Spanabfuhr und bei Bedarf durch Innenkühlung deutlich erhöhen.
Welche Vorteile bieten modulare Planfräswerkzeuge im Produktionsalltag?
Modulare Planfräser ermöglichen schnellen Plattenwechsel, reduzieren Rüstzeiten und erlauben die Anpassung an unterschiedliche Schnittbreiten und Werkstoffe ohne kompletten Werkzeugwechsel.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com