Planfräser für schnelle, plane Flächenbearbeitung
Planfräser sind speziell entwickelte Trägerwerkzeuge zum großflächigen Abtrag und exakten Planfräsen von Werkstücken und verbessern die Oberflächenqualität sowie die Prozessstabilität bei der Bearbeitung von Stahl, Guss und NE-Metallen; sie kommen sowohl in offener Ausführung ohne Innenkühlung als auch als innengekühlte Varianten zum Einsatz, wobei die innengekühlte Version durch gezielte Kühlmittelzufuhr thermische Überlastung verhindert und die Standzeit erhöht. Die Werkzeuge dienen dazu, große Schnittbreiten effizient zu bearbeiten und durch optimale Spanabfuhr eine gleichmäßige Oberfläche zu erzeugen, wobei die offene Ausführung einfache Fräsaufgaben mit externer Kühlung abdeckt. Planfräser bieten besonders bei schwer zerspanbaren, wärmeempfindlichen oder klebenden Werkstoffen Vorteile, weil die innengekühlte Bauform die Bildung von Aufbauschneiden reduziert und die Oberflächengüte verbessert.
63mm 45° Facing Tool Head for SNKX 1606 and ONHX 0606 Indexable Inserts, 5 Cutting Edges, 50mm Overall Length - Teknik Makina
Combine precise 45° cutting geometry with Palbit SNKX/ONHX compatibility and a compact 22 mm mounting for consistent facing performance; order directly via Metav Werkzeuge or consult our specialists for application advice. Facing cutter head T629TM – 45° geometry for SNKX 1606 / ONHX 0606 indexable inserts (Teknik Makina) The Facing cutter head T629TM is a compact 45° tool holder designed for efficient facing and finishing with SNKX 1606 and ONHX 0606 indexable inserts 45° cutting geometry for smooth facing Compatible with SNKX 1606 and ONHX 0606 inserts 63 mm diameter for stable machining 22 mm mounting bore for secure clamping Five cutting edges for continuous productivity High-performance facing with proven insert compatibility The T629TM delivers a controlled cutting action through its 45° cutting geometry, which reduces radial forces and supports stable chip formation. Designed for use with SNKX 1606 and ONHX 0606 indexable inserts (Palbit compatible), the head ensures predictable cutting behaviour and repeatable surface quality. This specification is suitable where consistent facing finish and cycle-time reductions are required, translating technical data into measurable production gains. Secure mounting and robust construction for reliable operation A compact 22 mm bore combined with a 63 mm diameter provides a rigid interface that minimises runout and vibration during cutting. Clamping is achieved with M5x12 Torx screws tightened using a T20 key, enabling quick insert changes and repeatable torque values. The head’s balanced geometry and modest mass (0.776 kg) support stable spindle loads and contribute to longer tool life and predictable machining parameters. Efficient tool life and straightforward maintenance Equipped to carry five cutting edges, the head allows a sequence of indexable insert positions before replacement, lowering downtime and tool-handling frequency. The modular design simplifies insert access, while the use of standard SNKX/ONHX inserts keeps consumable logistics simple. The result is an optimised cost-per-part ratio and fewer interruptions — benefits that directly affect workshop throughput and operational efficiency. Applications and operational advantages This facing cutter head is intended for facing and finishing operations where SNKX 1606 / ONHX 0606 inserts are already specified. The combination of Palbit insert compatibility and the head’s geometry makes it suitable for batch production and toolroom setups that demand reliable repeatability. Installation and changeover procedures are straightforward, supporting fast set-up in mixed-production environments without complex adjustments. For dependable 45° facing with Teknik Makina build quality, contact Metav Werkzeuge for tailored advice and fast dispatch from Emmerich — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T629TM Manufacturer: Teknik Makina Product: Facing cutter head (45°) for SNKX 1606 / ONHX 0606 Facts Diameter: 63 mm Mounting bore: 22 mm Overall length: 50 mm Weight: 0.776 kg Cutting angle: 45° Number of cutting edges: 5 Special features Compatible inserts: SNKX 1606, ONHX 0606 Compatible insert manufacturer: Palbit Torx screw: M5x12 Torx key size: T20 SKU: T629TM FAQ What inserts fit this cutter head? The facing cutter head accepts SNKX 1606 and ONHX 0606 indexable inserts; Palbit-brand inserts are listed as compatible for this tool. Which toolholder bore is required for mounting? Mounting requires a 22 mm centre bore; the 22 mm mounting bore provides secure clamping and minimal runout for the T629TM. How many cutting edges does the head provide? The head carries five cutting edges, allowing multiple index positions before insert replacement and improving uptime. What torque connection is used for insert retention? Inserts are secured with M5x12 Torx screws, tightened using a T20 key for consistent clamping force. Is the head suitable for heavy-duty facing? The 45° geometry and 63 mm diameter offer stable performance for facing tasks where SNKX/ONHX inserts are appropriate; assess process parameters to confirm suitability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Angle Tool Holder for ANHX 1004 Indexable Inserts, 90° Cutting Edge, M3x7 Torx Screw - Teknik Makina
Take advantage of the combination of 90° cutting geometry, a 63 mm body diameter and a 22 mm shank to secure stable, repeatable corner turning. Benefit from compatibility with ANHX 1004 indexable inserts and reliable mounting using the M3x7 Torx fastening. Order the tool directly via Metav Werkzeuge or consult the advisors for application-specific guidance. Eckmesserkopf — Corner cutting head with 90° geometry for ANHX 1004 indexable inserts (Teknik Makina) The Eckmesserkopf is a compact corner cutting head engineered for precise 90° turning operations using ANHX 1004 indexable inserts; ideal where rigidity and repeatability matter in production and jobbing shops. 90° cutting angle for precise corner turning Compatible with ANHX 1004 indexable inserts 63 mm body diameter for rigid stability 22 mm shank diameter for secure mounting Consistent geometry for predictable machining results The corner cutting head delivers a 90° cutting angle combined with a Ø63 mm body to reduce vibration and deflection during side and face turning. The hardened connection to the machine spindle and the 22 mm shank ensure a secure fit, translating spindle power into cutting performance with minimal loss. This design yields repeatability across batches and reduces scrap rates by stabilising chip formation and tool engagement. Fast insert changes and secure clamping cut downtime Compatibility with ANHX 1004 indexable inserts and the Palbit insert form means insert swaps are straightforward and standards-based. The head uses an M3x7 Torx fastening and a T8 Torx key for positive clamp torque, which keeps the insert seated reliably. Reduced tool-change time and dependable clamping improve uptime and support consistent cycle times on turning centres. Built for everyday workshop use with dependable handling With a modest mass of 0.638 kg and a compact overall length of 40 mm, the head is easy to manoeuvre during tool set-up yet robust enough for repeated operation. The configuration features seven cutting edges, promoting efficient indexing strategies where multi-edge inserts are used. The combination of compact dimensions and a rigid interface supports both short overhangs and close-tolerance face turning. Practical benefits for purchasing and inventory decisions Choosing this corner cutting head simplifies tooling logistics: it fits a common insert format and fastener type, helping standardise the tooling pool. The technical profile — Ø63 mm, 22 mm shank, 90° geometry — supports wide applicability across medium-duty turning tasks, allowing procurement teams to reduce the number of specialised holders required on the shop floor. Select Teknik Makina’s corner cutting head for its proven geometry and compatibility, and contact Metav Werkzeuge to arrange supply or technical consultation directly from Emmerich. Technical data Article number: T658TM Manufacturer: Teknik Makina Facts Diameter: 63 mm Overall length: 40 mm Shank diameter: 22 mm Weight: 0.638 kg Cutting angle: 90° Cutting edges: 7 ECLASS: 21181015 Features Compatible inserts: ANHX 1004 Compatible insert manufacturer: Palbit Torx key size: T8 Torx screw: M3x7 Brand: Teknik Makina FAQ Which indexable inserts fit this cutting head? The Eckmesserkopf is designed for ANHX 1004 indexable inserts; Palbit-format inserts are compatible and recommended for correct seating and performance. What is the required shank or toolholder interface? This corner cutting head features a 22 mm shank diameter for secure mounting in compatible tool turrets or holders. Which fastening hardware is supplied or required? Clamping is achieved using an M3x7 Torx screw tightened with a T8 Torx key; the specification is included in the product details for workshop preparation. Is the head suitable for tight, repeatable corner turning? Yes — the 90° geometry, Ø63 mm body and compact 40 mm length provide rigidity and repeatability for precise corner and face turning operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Angled Tool Holder For APKT 1705 Indexable Inserts, 90° Cut Angle, M4x10 Torx Screw - Teknik Makina
Benefit from a compact, precision-engineered corner tool head that combines a 90° cutting angle with a secure 22 mm shank for stable mounting; compatible with APKT 1705 indexable inserts and supplied with a Torx clamping screw for fast, reliable insert changes – order or discuss options with Metav Werkzeuge for technical guidance. Eckmesserkopf — corner tool head with 90° cutting angle for APKT 1705 indexable inserts by Teknik Makina Eckmesserkopf is a compact 90° corner turning head designed for reliable external turning and face‑off operations with APKT 1705 indexable inserts in CNC lathes and turning centres. 90° cutting angle for precise corner turning Compatible with APKT 1705 indexable inserts 22 mm shank diameter for secure mounting Torx M4x10 clamping screw, T15 key included Reliable precision and predictable machining results The compact head offers a 90° cutting angle that promotes consistent geometry when executing corner and shoulder cuts. The solid construction and precise mounting dimensions reduce vibration and runout, which in turn improves surface finish and tool life. Compatibility with APKT 1705 indexable inserts means the tool head fits a widely used insert format, simplifying inventory and replacement logistics. The result is predictable machining outcomes and reduced scrap rates. Secure clamping and rapid insert changes for uptime A 22 mm shank ensures a stiff connection to the holder or turret, minimising deflection under load. The assembly uses a Torx M4x10 clamping screw tightened with a T15 key, enabling quick, repeatable insert clamping without specialised tooling. This reduces downtime during changeovers and supports higher machine utilisation. For workshops seeking faster set‑ups, the combination of standardised screws and familiar insert geometry delivers practical gains in daily productivity. Compact design that suits crowded turrets and versatile applications With a head diameter of 63 mm, an overall length of 45 mm and a weight of 0.52 kg, this tool head is dimensioned for installations where space is limited yet stiffness remains essential. The design is particularly suitable for external turning, profiling and light facing tasks where a corner tool head is preferred. Built to accept inserts from established manufacturers such as Taegutec, it offers flexibility across jobs and materials while keeping the tool kit manageable. Practical advantages for purchasing and workshop logistics Using a standard insert type like APKT 1705 keeps consumable procurement straightforward and cost‑efficient. The compact footprint and standardised clamping screw mean fewer special spares are required, simplifying stock management. For buyers and production planners, the technical compatibility and repeatability translate directly into lower operational complexity and steady production throughput. Contact Metav Werkzeuge for tailored advice on integrating this Teknik Makina corner tool head into the production line or to request a quotation and compatibility checks Technical Data Article number: T554TM Manufacturer: Teknik Makina Compatible inserts: APKT 1705 Indexable Inserts Facts Cutting angle: 90° Shank diameter: 22 mm Head diameter: 63 mm Overall length: 45 mm Cutting edges: 6 Weight: 0.52 kg Special features Compatible with Taegutec inserts Torx clamping screw M4x10, key T15 For APKT 1705 indexable inserts 90° corner tool head design FAQ Which insert type fits this corner tool head? The tool head is designed for APKT 1705 indexable inserts and is compatible with inserts from manufacturers such as Taegutec. What are the mounting dimensions required? Mounting requires a spindle or turret accepting a 22 mm shank; the overall head diameter is 63 mm and the length is 45 mm. What clamping hardware is supplied with the tool head? The delivery references a Torx M4x10 clamping screw and the required T15 key for secure insert fastening. Is the tool head suitable for heavy roughing? The compact, stiff design is optimised for precision turning and finishing; for heavy roughing applications, consider holders and heads specified for higher cutting loads. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Corner Boring Head for APMT 1604 Indexable Inserts with Internal Coolant, 90° - Teknik Makina
Secure consistent shoulder milling results with the combination of 63 mm diameter, internal coolant and direct compatibility with APMT 1604 inserts; order the milling head directly via Metav Werkzeuge or ask our consultants if needed. 63 mm square shoulder milling head T245-1TM — internal coolant, APMT 1604 compatible | Teknik Makina The 63 mm square shoulder milling head T245-1TM is a compact, precision toolholder designed for robust shoulder and face milling tasks in production and jobbing shops, suited to APMT 1604 indexable inserts. 63 mm diameter for shoulder milling Internal coolant for improved chip evacuation Compatible with APMT 1604 indexable inserts 90° cutting angle for precise shoulder cuts Precise geometry for repeatable shoulder cuts The holder’s 63 mm diameter and 90° cutting angle deliver consistent, square shoulders and accurate face finishes across series production. The compact 45 mm overall length reduces overhang and increases rigidity, which in turn lowers vibration and improves surface quality. Designed to accept APMT 1604 indexable inserts, the holder is suitable for both roughing and finishing passes where repeatability and dimensional control are required. This combination of geometry and insert compatibility ensures predictable tool behaviour, helping to reduce rework and increase throughput in small-batch and serial machining. Improved cooling and chip management for longer life Equipped with internal coolant, the toolholder directs cutting fluid close to the cutting edge for effective cooling and chip evacuation. This targeted cooling reduces thermal load on the insert and cutting edge, slowing wear and preserving geometry over longer tool life. In practical terms, internal coolant contributes to more stable cutting conditions, especially during interrupted cuts or when machining difficult-to-cut materials. The result is fewer indexings, lower tooling costs per component and more consistent surface integrity on the workpiece. Secure clamping and service-friendly fastenings The clamping architecture uses a Torx T15 drive and M4x10 Torx screws for secure insert retention and straightforward maintenance. These standardised fastenings allow quick indexings and minimise downtime during tool changes. The toolholder’s balanced mass (approx. 0.578 kg) and compact form factor promote stable running at typical milling speeds, supporting higher feed rates where the cutter geometry and insert grade permit. For shops seeking predictable set-up times, the combination of standard Torx fixing and indexable insert compatibility simplifies inventory and reduces operator training needs. Ready for industrial workflows and supplier assurance Matched to Korloy-manufactured APMT 1604 inserts, the head is intended for industrial users who require a durable, serviceable solution for shoulder milling. The SKU T245-1TM identifies the exact configuration for procurement and toolroom records. Integrating this toolholder into a standardised tooling setup reduces complexity at the machine and streamlines reordering. For buyers focused on reliability and supply-chain transparency, Metav’s provision from Emmerich ensures centralised access to documentation and replacement parts suitable for production environments. For specification advice or to arrange supply of the T245-1TM square shoulder milling head, contact Metav Werkzeuge for tailored recommendations and prompt delivery from Emmerich. Technical data SKU: T245-1TM Product type: Square shoulder milling head For indexable inserts: APMT 1604 Core data Diameter: 63 mm Overall length: 45 mm Weight: 0.578 kg Cutting angle: 90° Number of cutting positions: 6 Special features Internal coolant: yes Compatible insert manufacturer: Korloy Torx key: T15 Torx screw: M4x10 Manufacturer: Teknik Makina FAQ What inserts fit this milling head? This milling head accepts APMT 1604 indexable inserts; the holder is specified for inserts from Korloy in the supplied configuration. Is the toolholder suitable for high-feed operations? The compact 45 mm overhang and 63 mm diameter provide increased rigidity for higher feed rates where insert grade and cutting data allow; confirm specific feed recommendations with the chosen insert. How is cooling provided to the cutting edge? Cooling is delivered via internal coolant channels that route fluid directly to the insert zone to improve heat control and chip evacuation. Which fasteners are used for insert clamping? Insert clamping uses a Torx T15 drive and M4x10 screws to ensure secure retention and straightforward servicing. Can this head be used for both roughing and finishing? Yes; with appropriate insert grades and cutting parameters, the holder supports both roughing and finishing operations thanks to its 90° cutting angle and stable geometry. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Corner Cutter Head for APMT 11T3 Indexable Inserts 90° Cutting Angle, 7 Edges, 22mm Shank - Teknik Makina
Combining reliable 90° corner geometry, secure 22 mm shank support and compatibility with APMT 11T3 indexable inserts, this turning head delivers consistent corner profiles and reduced setup time; order via Metav Werkzeuge or contact our consultants for technical guidance. Corner Turning Head T254TM — for APMT 11T3 indexable inserts, 90° cutting angle (Teknik Makina) The Corner Turning Head T254TM is a compact indexable insert holder engineered for precise 90° corner turning and shoulder operations, designed to accept APMT 11T3 inserts for workshop and production use 90° cutting angle for precise corner turning Compatible with APMT 11T3 indexable inserts 22 mm tool shank diameter for rigid clamping Supplied with M2.5×5.5 Torx screw T8 Consistent corner geometry for accurate finishing The toolhead provides a 90° cutting angle that ensures repeatable corner profiles and tight shoulder runs. By using standard APMT 11T3 inserts, often supplied by Korloy, the holder simplifies insert sourcing and reduces inventory complexity. The geometry is optimised to produce consistent surface quality on shoulder faces and internal corners, which results in fewer secondary operations and a more efficient production flow. Rigid mounting and quick insert changes to cut downtime With a 22 mm shank for secure clamping and a compact overall length of 40 mm, the assembly offers high stiffness that reduces vibration and improves tool life. The insert is retained with an M2.5×5.5 Torx screw (Torx key T8) for fast, toolroom-friendly changes. The relatively low mass of 0.483 kg aids manoeuvrability during setup while still providing the stability required for repeatable turning cycles. Versatility across workshop turning tasks Designed for APMT 11T3 indexable inserts, the head supports multi-edge insert strategies and is suitable for finishing and semi-finishing of shoulders and radii where precise right-angle control is required. The 63 mm head diameter contributes to rigid contact with the toolholder assembly, and the configuration with seven cutting edges offers options for economical insert indexing in batch production. These characteristics make the head a practical choice where throughput and predictable results are priorities. For secure supply and expert advice on integrating the T254TM corner head into production, contact Metav Werkzeuge—call +49 2822 7131930 or email info@metav-werkzeuge.com for ordering and technical consultancy. Technical data Article number: T254TM Name: Corner turning head for APMT 11T3 Manufacturer: Teknik Makina Dimensions & weight Diameter: 63 mm Shank diameter: 22 mm Overall length: 40 mm Weight: 0.483 kg Cutting angle: 90° Compatibility & fittings For APMT 11T3 indexable inserts Suitable insert maker: Korloy Torx screw: M2.5×5.5 Torx key: T8 Number of cutting edges: 7 FAQ Which inserts fit this turning head? The head is designed for APMT 11T3 indexable inserts; Korloy-compatible APMT 11T3 grades and geometries are suitable for routine use. What shank size is required in the toolholder? A 22 mm shank diameter is specified for rigid mounting and optimal stability when machining with the T254TM. How is the insert secured and changed? Inserts are retained with an M2.5×5.5 Torx screw; use a T8 Torx key for secure fastening and rapid replacement. Is the head suitable for finishing shoulders and corners? Yes — the 90° cutting angle and rigid construction are tailored to produce precise shoulder faces and corner radii with consistent surface finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Corner Cutting Head for BOMT 1304 Indexable Inserts L40mm With Internal Coolant - Teknik Makina
Take advantage of the precise combination of reliable cooling and robust clamping offered by this corner turning head: the integrated internal coolant and compatibility with BOMT 1304 indexable inserts reduce tool change frequency and improve surface finish, while supply from Metav Werkzeuge ensures dependable delivery and technical support. Corner turning head T967-1TM for BOMT 1304 indexable inserts — 63 mm, internal coolant (Teknik Makina) Corner turning head T967-1TM is a compact turning head designed for perpendicular cutting tasks on lathes and toolholders, intended to accept BOMT 1304 indexable inserts. 63 mm head diameter Internal coolant supply Compatible with BOMT 1304 inserts 90° cutting angle, six cutting edges Controlled cooling for longer insert life The integrated internal coolant channel delivers coolant directly to the cutting zone, which improves chip evacuation and reduces thermal load on the insert. For repetitive or long cycle turning operations this means longer tool life and more consistent surface finishes. Using coolant at the tip also helps avoid thermal expansion of the tool head, maintaining dimensional stability during extended runs. The coolant routing is especially beneficial when machining alloys or tougher materials where heat build-up is a limiting factor. Stable geometry for accurate shoulder and facing cuts With a 63 mm head diameter and a defined 90° cutting angle, the design provides a stable cutting geometry ideal for square shoulders and facing operations. The head offers six cutting edges, allowing multiple indexings of the insert before replacement, which enhances cost-efficiency in production environments. The compact 40 mm overall length contributes to reduced overhang and improved rigidity in the toolholder, translating directly into better repeatability and tighter tolerances on machined components. Service‑friendly fastening and precise assembly Fastening utilises a T10 Torx interface and M3.5x8.5 Torx screw for secure clamping of each insert pocket, ensuring straightforward replacement and minimising downtime. The Torx standard gives positive drive engagement to prevent stripping during tightening and allows controlled torque application for reliable repeatability. Clear access to screws and standardised fasteners means maintenance is faster and less prone to error, supporting higher uptime on the shop floor. Built for compatible systems and production workflows This tool head is configured specifically for BOMT 1304 indexable inserts and is compatible with inserts from Ingersoll, making it easy to integrate into existing tooling systems that already use that insert family. At a weight of 0.612 kg, it balances robustness with manageable mass for multi‑station turrets and automated tool changers. The combination of standardised mounting, coolant capability and insert compatibility supports both small workshops and industrial production lines seeking predictable, repeatable cutting performance. For tailored advice on integrating the Teknik Cutting Tools corner turning head T967-1TM into existing toolholders or for guidance on optimal coolant settings and insert choice, contact Metav Werkzeuge — reliable supply and technical assistance from Emmerich is available via email or phone. Technical data Article number / SKU: T967-1TM Product type: Corner turning head eClass: 21181015 Core measurements Head diameter: 63 mm Overall length: 40 mm Weight: 0.612 kg Cutting angle: 90° Cutting edges: 6 Special features Internal coolant Compatible inserts: BOMT 1304 (Ingersoll) Torx key: T10 Torx screw: M3.5x8.5 FAQ What inserts does this turning head accept? The turning head accepts BOMT 1304 indexable inserts; it is also compatible with inserts from Ingersoll, ensuring straightforward integration into established tooling systems. Is the coolant supplied through the head? Yes, the head features internal coolant routing that delivers cooling directly to the cutting zone to improve chip control and extend insert life. How many times can an insert be indexed? The head is designed for inserts with six cutting edges, allowing multiple indexings before replacement, which reduces tooling costs over time. Which fasteners are used for securing the inserts? Inserts are secured with a T10 Torx drive using M3.5x8.5 Torx screws, providing positive engagement and reliable clamping during machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Corner Cutting Holder for WNMU 0705 Indexable Inserts, 90° Cutting Angle, M4x10 Torx Clamp - Teknik Makina
Benefit from a compact, sturdy toolholder that combines a 22 mm shank and a 90° cutting angle for consistent corner operations; the holder accepts WNMU 0705 indexable inserts and secures them with an M4x10 Torx screw. Order the corner insert head directly via Metav Werkzeuge or ask our consultants if needed. Teknik Makina corner insert head — for WNMU 0705 indexable inserts, 22 mm shank The Teknik Makina corner insert head is a compact toolholder engineered for machining tasks that require reliable indexable-insert performance and a controlled 90° cutting geometry. 22 mm shank diameter for stable clamping Compatible with WNMU 0705 indexable inserts 90° cutting angle for precise corner machining M4x10 Torx screw, T15 key for secure fastening High-stability design for predictable results The holder’s 22 mm shank and 63 mm diameter body provide a rigid interface with the machine, reducing vibration and improving surface finish in sensitive operations. Combined with the 90° cutting angle, the arrangement delivers a defined cutting geometry that simplifies process planning and toolpath definition. This mechanical stability translates into repeatable part quality and fewer in-process adjustments, which supports higher throughput without compromising dimensional accuracy. Fast, secure insert mounting to reduce downtime Designed for use with WNMU 0705 indexable inserts from brands such as ISCAR, the head uses an M4x10 Torx screw tightened with a T15 key for positive, repeatable clamping. The simple fastening method shortens tool-change intervals and lowers set-up complexity on the shopfloor. At an overall length of 40 mm and a mass of 0.515 kg, the holder balances compact installation with enough mass to dampen chatter, offering a practical compromise between accessibility and cutting stability. Practical application and maintenance advantages Equipped with six cutting edges, the insert system enables multiple indexing steps before replacement, improving cost efficiency per edge. The compact footprint suits confined tool stations or multi-tool turrets while the robust construction reduces the need for frequent maintenance. Routine checks are limited to screw torque and insert condition; this straightforward upkeep supports long production runs and predictable tooling budgets. The combination of mechanical clarity and uncomplicated serviceability makes the head suitable for both specialised workshops and industrial turning cells. Contact Metav Werkzeuge today to discuss application fitment or request further technical details for the Teknik Makina corner insert head T393TM Technical Data Article number: T393TM Manufacturer: Teknik Makina Weight: 0.515 kg Overall length: 40 mm Shank diameter: 22 mm Diameter: 63 mm Facts Cutting angle: 90° Number of cutting edges: 6 Fastening screw: M4x10 Torx key: T15 Special features Compatible inserts: WNMU 0705 Compatible insert manufacturer: ISCAR Compact toolholder design Indexable-insert system FAQ Can this holder be used with WNMU 0705 inserts from other manufacturers? The corner insert head accepts WNMU 0705 indexable inserts; compatibility with other brands depends on the exact insert geometry, but the holder is specified for WNMU 0705 profiles and is confirmed with ISCAR variants for the best fit. What tools are required to mount and secure the insert? Mounting uses an M4x10 Torx screw tightened with a T15 key; the process is quick and repeatable for the Teknik Makina corner insert head (SKU T393TM). How does the 22 mm shank influence machining performance? The 22 mm shank provides a stable clamping interface that reduces vibration and enhances surface finish, leading to more consistent machining results and longer insert life. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
63mm Corner Milling Head ANKX 1205 L45mm Internal Coolant, 90° - Teknik Makina
Take advantage of the precise 90° cutting geometry, compact 63 mm diameter and integrated internal coolant for reliable shoulder turning and reduced cycle times; order or request advice via Metav Werkzeuge for a seamless supply from Emmerich. 63 mm Corner Turning Head for ANKX 1205 Indexable Inserts — 90° Cutting Angle (Teknik Makina) A 63 mm corner turning head designed for ANKX 1205 indexable inserts, delivering 90° cutting geometry and internal coolant for efficient shoulder and face turning in compact setups 63 mm diameter for compact setups 90° cutting angle for precise shoulder turning Internal coolant for improved chip evacuation Compatible with ISCAR ANKX 1205 inserts Maximise machining precision and process stability The compact turning head combines a 63 mm diameter with a short overall length (45 mm) to reduce overhang and minimise deflection in tight setups. Its 90° cutting angle is tailored for accurate shoulder and face machining, enabling consistent dimensional control and repeatability. Designed for indexable-insert turning, the head accepts ANKX 1205 inserts from ISCAR, which simplifies inventory management and shortens tool-change times. The measured mass of 0.596 kg supports dynamic stability while maintaining a rigid connection to the toolholder. Internal coolant and secure insert clamping for longer tool life Built-in internal coolant channels direct cutting fluid close to the cutting edge, improving lubrication and chip control under medium to heavy cuts. This targeted cooling reduces thermal loads on the insert, which in turn extends life and maintains surface quality. Inserts are fastened with M4x10 Torx screws, driven with a T15 key for repeatable torque and clamping force; this secure fixation minimises micro-movements that can cause premature wear and chatter. Compact design for quick set-up and reliable indexing With an overall length of 45 mm and a weight of 0.596 kg, the turning head is engineered for short overhang applications where stiffness matters. It provides six effective cutting positions, enabling efficient index changes without complex regrinding. The robust mechanical interface and standardised screw sizes simplify maintenance and shorten downtime during insert changes, translating to higher machine availability and predictable throughput. Suitable applications and workshop benefits The head is intended for general turning operations where precise 90° shoulders, faces and chamfers are required. It suits production shops and subcontractors working with steel and alloy components where interchangeability with ISCAR ANKX 1205 inserts is a logistical advantage. The compact footprint supports multi-spindle and bar-fed machines, while the internal coolant option enhances performance on medium-cut cycles. For further specification checks or to confirm compatibility with existing toolholders, technical guidance is available from Metav Werkzeuge. Contact Metav Werkzeuge for tailored advice on application-specific setup and to secure the Teknik Cutting Tools corner turning head with internal coolant — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: T574-1TM Label: 63 mm corner turning head ANKX 1205 L45 mm with internal coolant Manufacturer: Teknik Makina Facts Diameter: 63 mm Overall length: 45 mm Weight: 0.596 kg Cutting angle: 90° Cutting positions: 6 Design & special features Internal coolant: yes Suitable for: ANKX 1205 indexable inserts Compatible insert manufacturer: ISCAR Torx screw: M4x10 Torx key: T15 FAQ What insert type does this head accept? The head is designed for ANKX 1205 indexable inserts (compatible with ISCAR insert variants) and secures them with M4x10 Torx screws. Is internal coolant available and how does it help? Yes; the internal coolant directs fluid to the cutting edge, improving chip evacuation, reducing tool temperature and extending insert life. What are the main dimensional limits for use in compact setups? With a 63 mm diameter and 45 mm overall length, the head is suited to applications requiring low overhang and high stiffness. How many effective cutting positions are provided? The head provides six cutting positions, enabling quick indexing and extended intervals between insert replacements. Which torque tool is required for insert changes? Insert screws use a T15 Torx drive (M4x10 screws) for secure and repeatable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Corner Milling Head for AP-- 1604 Indexable Inserts L45mm With Internal Coolant - Teknik Makina
Benefit from a compact, rigid design with a 63 mm machining diameter, internal coolant and precise 90° cutting geometry to ensure consistent turning results; order supply and application advice through Metav Werkzeuge for fast delivery and expert support. Corner tool head – 63 mm diameter, internal coolant (Teknik Makina) The corner tool head is a compact turning head designed for use with AP-- 1604 indexable inserts, engineered to deliver stable cuts and efficient chip evacuation in conventional and CNC lathe operations. 63 mm diameter for compact machining Internal coolant for improved chip evacuation Compatible with AP-- 1604 indexable inserts L45 mm overall length for stable cutting Rigidity and geometry for repeatable turning performance The compact construction with a 63 mm diameter and L45 mm overall length delivers a high stiffness-to-size ratio, which reduces vibration and improves surface finish on turned components. The integrated 90° cutting angle is specifically useful for square shoulder and profiling operations where a defined corner is required; this geometry concentrates cutting forces predictably, allowing the cutter body to maintain positional stability during interrupted cuts. With six index positions, the head offers six cutting edges, extending effective tool life before regrinding is needed. These design choices translate directly into predictable cycle times and fewer tool changes on the shopfloor, supporting continuous production runs in jobbing and small-series manufacturing. Cooling, chip control and secure insert clamping Equipped with internal coolant, the tool head channels coolant close to the cutting zone to cool the insert flank and assist chip evacuation, which helps to prolong insert life and to maintain a consistent cutting temperature. The head accepts AP-- 1604 indexable inserts from Korloy, a common standard in turning applications; this compatibility simplifies stocking and replacement. Secure clamping is provided via a Torx screw system (Torx T15, screw M4x10) that ensures repeatable seating and minimal play after reassembly. For operations sensitive to surface integrity, the combination of coolant delivery and firm clamping improves finish quality and reduces built-up edge, offering both process reliability and cost efficiency through longer insert intervals. Practical fit for workshop workflows and maintenance Weighing approximately 0.578 kg and finished for robust workshop use, the head integrates into standard toolholder arrangements and is straightforward to set up on a turret or tool post. The compact footprint is advantageous where tool-to-tool spacing is limited, and the use of standard AP-- 1604 inserts reduces logistics complexity. Routine maintenance consists of checking clamp torque with a Torx T15 driver and inspecting coolant passages for blockage; the clear service steps mean minimal downtime and predictable maintenance intervals. Backed by Teknik Makina engineering and Metav’s distribution from Emmerich, the component supports efficient implementation into production lines and offers a dependable choice where repeatability and tool life are priorities. For precision turning tasks that demand stability and efficient cooling, choose the Teknik Makina corner tool head with internal coolant and arrange supply or application consulting via Metav Werkzeuge from our Emmerich centre (info@metav-werkzeuge.com / +49 2822 7131930) Technical data SKU: T185-1TM Product type: Corner tool head Manufacturer: Teknik Makina eClass: 21181015 Facts Diameter: 63 mm Overall length: 45 mm Weight: 0.578 kg Cutting edges: 6 Cutting angle: 90° Torx screw: M4x10 Torx key: T15 Special features Internal coolant For AP-- 1604 indexable inserts Compatible with Korloy inserts Label: 63mm Corner tool head AP-- 1604 L45mm with internal coolant FAQ What inserts fit this tool head? The corner tool head is designed for AP-- 1604 indexable inserts; Korloy AP-- 1604 inserts are fully compatible with the clamping geometry. Does the head provide internal coolant? Yes, internal coolant is integrated to deliver fluid close to the cutting edge, improving tool life and chip control for the Teknik Makina corner tool head (SKU T185-1TM). Which screw and key are required for insert clamping? Insert clamping uses a Torx screw M4x10 tightened with a Torx T15 driver to ensure secure and repeatable seating. Is this head suitable for compact turret setups? The compact 63 mm diameter and L45 mm length make the head suitable for tight tool spacing and turret-mounted turning tasks where rigidity and small footprint are required. How often should clamping and coolant passages be checked? Regular checks of clamp torque and coolant passages are recommended as part of routine maintenance to preserve repeatability and coolant flow for the Teknik Makina corner tool head. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Corner Milling Head for APKT 1003 Indexable Inserts Internal Coolant, 90° - Teknik Makina
Take advantage of a combination of precision, robust design and effective cooling: the head’s 63 mm diameter and internal coolant ensure consistent shoulder cuts and reduced thermal distortion. The compact 40 mm length and a mass of 0.543 kg support stable machining and easy handling. Order the corner tool head directly via Metav Werkzeuge or ask our consultants if needed. Corner tool head T178-1TM – 63 mm diameter, internal coolant, for APKT 1003 indexable inserts A corner tool head engineered for precise shoulder turning and finishing with APKT 1003 indexable inserts, offering internal coolant and a 90° cutting angle for reliable square-cut performance 63 mm diameter for stable setup Internal coolant for effective cooling For APKT 1003 indexable inserts Compatible with Korloy inserts Reliable square-shoulder performance for production environments The head is designed to deliver consistent 90° cutting angle results when machining shoulders and faces. The geometry supports accurate perpendicular cuts with minimal deflection, which improves first-pass quality and reduces secondary operations. The robust body geometry combined with a 63 mm tool diameter increases rigidity; this higher stiffness lowers vibration during machining and enhances repeatability across batches. For workshops seeking predictable tolerances on repetitive tasks, the unit’s combination of stiffness and defined cutting geometry translates into time savings and fewer rejected parts. Effective cooling and chip control for longer insert life Integrated internal coolant channels feed cutting fluid directly to the cutting edge, aiding heat dissipation and chip evacuation. By directing coolant to the tool–workpiece interface, the system reduces thermal softening of the insert and limits built-up edge formation, extending insert life and maintaining surface finish quality. In practical terms, this reduces tooling intervention and replacement frequency, improving uptime in medium-to-high volume turning tasks. The design supports efficient cooling without additional external fittings, simplifying setup for shops using centralised coolant supply. Practical handling and service features that speed maintenance The holder’s total length of 40 mm and the modest mass (0.543 kg) make it straightforward to mount and balance in standard toolposts. Fastener details are standardised: the clamp uses a Torx key T8 and Torx screw M2.5×5.5, which keeps routine insert changes quick and reproducible. The head accommodates multiple cutting edges—listed as seven cutting edges in the specification—delivering flexibility for indexable insert rotations and extended service intervals. These features reduce downtime during shift changes and make the head suitable for both jobbing and light-series production. Compatibility and application scope explained This tool head is made for APKT 1003 indexable inserts and is compatible with inserts from Korloy, allowing straightforward integration into existing tooling inventories. The configuration fits applications that require precise shoulder creation, profiling and finishing on cast and alloy steels. The compact design is especially advantageous where close-tool spacing or limited overhang occurs. For users upgrading from single-point tools, the indexable system provides consistent geometry and fast replacement, which benefits quality assurance processes in industrial workshops. Contact Metav Werkzeuge today to discuss how the Teknik Makina corner tool head T178-1TM can be integrated into existing turning setups, or to request a tailored tooling recommendation from our consultants Technical data SKU: T178-1TM Product type: Corner tool head Designation: for APKT 1003 Indexable Inserts Manufacturer: Teknik Makina Core dimensions Diameter: 63 mm Total length: 40 mm Weight: 0.543 kg Cutting angle: 90° Materials & special features Internal coolant: yes Compatible insert type: APKT 1003 Compatible insert manufacturer: Korloy Fixing screw: M2.5×5.5 Torx key: T8 Number of cutting edges: 7 FAQ What insert type does this head accept? The corner tool head is designed for APKT 1003 indexable inserts and is compatible with Korloy-manufactured inserts. Is the head cooled internally or externally? The tooling features internal coolant, supplying lubricant and coolant directly to the cutting zone to improve insert life and surface finish. What is the cutting angle and why does it matter? The tool head has a 90° cutting angle, optimised for square shoulders and perpendicular facing operations where dimensional accuracy and finish are critical. Which fasteners are required for insert changes? Insert retention uses a Torx screw M2.5×5.5, serviceable with a T8 Torx key for quick, repeatable insert changes. Can this head be used in compact toolpost arrangements? Yes; with a total length of 40 mm and a balanced mass (0.543 kg), the head is suitable for confined setups and reduced overhang situations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Corner Milling Head for APMT 11T3 Indexable Inserts Internal Coolant, 90° - Teknik Makina
Combine the stability of a 63 mm tool body with internal coolant for reliable, repeatable machining; benefit from quick insert changes for low downtime and order directly via Metav Werkzeuge or consult our specialists for application advice. Eckmesserkopf corner milling head — 63 mm diameter with internal coolant by Teknik Makina The Eckmesserkopf is a corner milling head for APMT 11T3 indexable inserts designed for precision milling and efficient chip evacuation in industrial metalworking. 63 mm nominal diameter for stable cutting Internal coolant for improved tool life Compatible with APMT 11T3 Korloy inserts Stable geometry for consistent chip engagement and surface quality The larger 63 mm diameter and the solid tool-body construction deliver higher rigidity during milling operations, which reduces vibration and improves surface finish. With a 90° cutting angle and 7 cutting edges, the head offers uniform chip engagement that helps maintain dimensional accuracy over longer runs. This stability translates into fewer reworks and less machine time per part, improving throughput on prismatic and profile machining tasks. Internal coolant and thermal control to extend insert lifetime Equipped with internal coolant, the head directs coolant precisely to the cutting zone to reduce edge temperature and prevent built-up edge. Controlled coolant flow assists with chip breaking and evacuation, lowering the risk of recutting and heat-related wear. The result is prolonged insert life and more consistent cutting parameters, which supports predictable maintenance intervals and cost-efficient production cycles. Fast insert changes and standardised clamping for reliable assembly Designed for APMT 11T3 indexable inserts and compatible with Korloy insert grades, the head uses a Torx clamping system (key T8) and M2.5x5.5 Torx screws for secure, repeatable fixing. The standardised fastening means insert replacement and tool setting are straightforward, reducing downtime during tool changes. Clear torque procedures and the standard screw format support safe handling and consistent clamping force in day-to-day shop-floor use. Compact length and balanced mass for flexible mounting and handling With an overall length of 40 mm and a mass of 0.483 kg, the tool head offers a compact footprint while preserving stiffness. The compact design facilitates close-offset machining in fixtures and on multi-axis turrets where space is limited. The balanced geometry reduces centrifugal imbalance at speed and helps maintain tool life while enabling quick orientation changes on CNC machines. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina corner milling head compatible with APMT 11T3 indexable inserts (SKU T254-1TM); email info@metav-werkzeuge.com or call +49 2822 7131930 for specification checks and supply options Technical Data Article number: T254-1TM ECLASS: 21181015 Product type: Corner milling head Manufacturer: Teknik Makina Core dimensions and weights Diameter: 63 mm Overall length: 40 mm Weight: 0.483 kg Cutting angle: 90° Cutting edges: 7 Designs and special features Internal coolant: yes Indexable inserts: APMT 11T3 Compatible insert manufacturer: Korloy Torx key: T8 Torx screw: M2.5x5.5 FAQ What materials is this head suitable for? The corner milling head from Teknik Makina (corner milling head, SKU T254-1TM) is designed for general industrial milling; compatibility with specific materials depends on the chosen APMT 11T3 insert grade and cutting data rather than the head itself. How does internal coolant improve performance? Internal coolant on this head delivers fluid directly to the cutting zone, lowering cutting-edge temperature and improving chip evacuation—this helps extend insert life and stabilise cutting conditions for the APMT 11T3 arrangement. Are Korloy inserts the only compatible brand? The head is specified as compatible with APMT 11T3 inserts and is known to accept Korloy-manufactured inserts; alternative brands using the APMT 11T3 geometry can be used provided they match the insert seat and clamping specifications. What fastening hardware is required for insert installation? Insert clamping uses a Torx screw specification M2.5x5.5 secured with a T8 Torx key, enabling standardised and repeatable clamping torque across maintenance cycles. Can this head be used in compact toolholders or confined turrets? Yes. The 40 mm overall length and compact mass (0.483 kg) make the head well suited to tight spaces and multi-axis turrets where short overhang and low imbalance are required for reliable machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
63mm Corner Milling Head TNKT 1606 L40mm Internal Coolant, 90° Cutting Angle - Teknik Makina
The combination of internal coolant, a 63 mm tool head diameter and secure Torx clamping ensures stable machining and consistent surface quality; combine robustness and compact design for reliable cycle times. Order the component directly via Metav Werkzeuge or consult the specialists for application guidance. Corner Tool Head T594TM for TNKT 1606 Indexable Inserts — 63 mm, internal coolant (Teknik Makina) The Corner Tool Head T594TM is a compact indexable insert holder designed for TNKT 1606 inserts, delivering coolant-fed chip control and a short overall length for tight turret clearance. 63 mm diameter for stable machining Internal coolant for effective chip evacuation Compatible with TNKT 1606 inserts (Korloy) Compact overall length 40 mm for tight tool layouts Consistent clamping and dimensional stability for precision turning The robust design with a 63 mm head diameter and a 22 mm mounting bore provides a stable support platform that reduces vibration and runout. Dimensionally compact with an overall length of 40 mm, this corner head suits close-clearance tool layouts while maintaining repeatable positioning. The holder’s mass of 0.432 kg contributes to steady cutting conditions and consistent surface finish when used in cyclic production. These design choices translate into reliable tolerances and predictable component quality across batches. Coolant-fed design improves tool life and process reliability Equipped with internal coolant, the holder delivers directed cooling to the cutting zone, improving chip evacuation and reducing thermal load on the insert. This feature helps maintain cutting-edge geometry for longer intervals, which supports extended tool life and fewer index changes during a shift. The internal feed also minimises heat-related dimensional drift and enhances surface integrity on the workpiece, making the head particularly advantageous for operations where thermal stability and consistent finishes are required. Secure fastening and proven insert compatibility for fast set-up Fast, secure insert fixation is achieved with a M4x10 Torx screw and the matching T15 key specification, allowing efficient changeovers and repeatable torque application. The holder accepts TNKT 1606 indexable inserts and is matched to Korloy insert geometries for straightforward procurement and interchangeability. With six cutting edges distributed across the insert clamping arrangement and a 90° cutting angle, the system supports stable shoulder and face turning operations while keeping maintenance and set-up times to a minimum. Contact Metav Werkzeuge for application-specific advice on the Teknik Cutting Tools corner head T594TM with internal coolant, and request detailed compatibility checks or delivery options from our Emmerich specialists Technical data SKU: T594TM Product type: Corner tool head Compatible inserts: TNKT 1606 Compatible insert manufacturer: Korloy Brand: Teknik Makina Dimensions & weight Diameter: 63 mm Overall length: 40 mm Mounting bore: 22 mm Weight: 0.432 kg Cutting edges: 6 Cutting angle: 90° Features & fittings Internal coolant: Yes Torx key: T15 Torx screw: M4x10 FAQ Which inserts fit this tool head? The corner head accepts TNKT 1606 indexable inserts; it is specified for inserts from Korloy and designed to match their seat geometry. Does the tool head supply coolant to the cutting edge? Yes, the T594TM features internal coolant delivery to the insert zone to support chip evacuation and reduce cutting temperatures. What are the key mounting dimensions? The holder has a 63 mm head diameter, a 22 mm mounting bore and an overall length of 40 mm, suitable for compact turret configurations. How is the insert fastened and which torque tool is required? Inserts are secured with a M4x10 Torx screw and the specified key size is T15, enabling consistent tightening and quick changes. What cutting geometry does the head offer? The head provides a 90° cutting angle and supports six cutting edges in its intended insert arrangement for stable shoulder and face machining. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Corner Tool Head ADMT 1204 L45mm Internal Coolant, 90° Cutting Angle - Teknik Makina
Take advantage of robust compatibility and targeted cooling to improve surface finish and extend tool life; the integrated coolant and secure Torx clamping reduce downtime and simplify maintenance. Order the part directly via Metav Werkzeuge or consult the Metav team for application support. Corner tool head T217-1TM — 63 mm with internal coolant for ADMT 1204 indexable inserts (Teknik Makina) A corner tool head engineered for short overhang turning and 90° shoulder work with ADMT 1204 indexable inserts, offering internal coolant supply for improved chip control and tool life 63 mm diameter holder Internal coolant channel Compatible with ADMT 1204 inserts 90° cutting angle for shoulder work Consistent chip control and longer tool life The angular holder is designed to channel coolant directly to the cutting zone via an internal coolant path, which promotes efficient chip evacuation and reduces thermal load on the insert. With a compact 63 mm body and an overall length of 45 mm, this configuration is suited to operations where rigidity and minimal overhang are essential. The targeted coolant delivery is particularly beneficial for interrupted cuts and heavy feed conditions, as the cooling action slows wear and helps to maintain dimensional stability over longer production runs. Secure clamping and quick insert replacement Clamping is executed with a Torx fastener system to ensure repeatable, vibration-resistant seating. The supplied T8 Torx interface and M3x7 screw provide a reliable connection that minimises setup variation and cutting-edge movement. The head supports six cutting edges, enabling efficient indexable insert changes and predictable maintenance cycles. These features reduce machine downtime and simplify tool change routines, supporting higher net machining time and consistent part quality. Designed for industrial use and straightforward integration Manufactured by Teknik Makina and matched to ADMT 1204 indexable inserts from Walter, the head is tailored for facing, square-shoulder turning and other 90° operations where a robust seat and coolant access are required. At 0.61 kg, the unit offers a balance between mass for damping and manageable handling during toolset updates. Inventory and supply are supported through Metav’s Emmerich distribution, where availability is combined with quality control to ensure dependable delivery and technical backing for production environments. Contact Metav Werkzeuge to secure the Teknik Makina corner tool head with internal coolant and confirm suitability for specific turning applications — Metav Werkzeuge is available at info@metav-werkzeuge.com or +49 2822 7131930 for technical guidance Technical data SKU: T217-1TM Label: 63mm Eckmesserkopf ADMT 1204 L45mm mit Innenkühlung ECLASS: 21181015 Product type: Corner tool head Manufacturer: Teknik Makina Measurements & weight Diameter: 63 mm Overall length: 45 mm Weight: 0.61 kg Cutting angle: 90° Number of cutting edges: 6 Features & fittings Internal coolant: yes Compatible inserts: ADMT 1204 Compatible insert manufacturer: Walter Torx key size: T8 Torx screw: M3x7 FAQ What inserts fit this holder? The corner tool head is designed for ADMT 1204 indexable inserts and is compatible with inserts from Walter as specified. Does the head provide through-tool coolant? Yes, the unit features an internal coolant channel that delivers coolant directly to the cutting edge to aid chip control and tool life. Which fastener is used to secure the insert? Insert clamping uses a T8 Torx interface with an M3x7 screw for secure and repeatable seating. Is the head suitable for 90° shoulder turning? The 90° cutting angle and compact geometry make the head well suited to facing and square-shoulder turning operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Corner Tool Head for ADKT 10T3 Indexable Inserts L40mm With Internal Coolant - Teknik Makina
Take advantage of the combination of precise 90° cutting geometry, internal coolant, and compatibility with ADKT 10T3 indexable inserts for consistent, high-quality turning operations; order the component directly via Metav Werkzeuge or consult our specialists for application advice. Corner turning head T699TM – 63 mm diameter, internal coolant by Teknik Makina The corner turning head for ADKT 10T3 indexable inserts is designed for short overhang turning and reliable coolant-fed cutting in industrial workshop environments. 63 mm diameter head Internal coolant supply Compatible with ADKT 10T3 inserts 90° cutting angle for precise cuts T8 Torx fastening, M2.5x5.5 screw Controlled cooling for longer tool life and stable metal cutting The integrated internal coolant channel directs cutting fluid precisely to the cutting edge, reducing thermal load and improving chip evacuation. This targeted cooling stabilises cutting temperatures and extends insert life, which in turn reduces tool change frequency and downtime. For machining operations that demand consistent surface finish and repeatable dimensions, the coolant-fed design supports higher productivity while preserving the integrity of the workpiece and tooling. Compact geometry for accurate corner turning and close-to-face work With a 63 mm diameter and 40 mm overall length, the holder offers a compact footprint that minimises overhang and vibration. The 90° cutting angle produces clean shoulder faces and square corners with minimal secondary operations, supporting tight tolerances in short-turning tasks. The reduced projection improves rigidity, enabling more aggressive cutting parameters where machine power and workholding permit, and contributes to consistent dimensional results in series production. Secure fastening and maintenance-friendly assembly Fastening uses a T8 Torx key and M2.5x5.5 Torx screw, ensuring repeatable clamp force and quick insert changes while maintaining seating accuracy. The design facilitates straightforward replacement of indexable inserts and routine checks without specialised fixtures. Lightweight construction at 0.44 kg keeps tool balance manageable and reduces spindle load during high-speed rotations, helping to preserve bearing life and machine performance. Compatibility and application scope for versatile workshop use The head accepts ADKT 10T3 indexable inserts and is specified as compatible with Korloy inserts, making it suitable for a wide range of steels and alloy materials when paired with the correct insert grade. The holder’s geometry and coolant capability make it appropriate for finishing and semi-finishing of turned faces and shoulders, offering a pragmatic solution for jobbing shops and production lines seeking economical insert tooling with robust performance. Discuss the T699TM corner turning head with Metav Werkzeuge for tailored tooling advice and reliable supply direct from Emmerich — Metav’s specialists can confirm fitment, recommend insert grades, and ensure fast delivery to the workshop floor Technical Data Article number: T699TM Designation: Corner turning head for ADKT 10T3 indexable inserts Brand: Teknik Makina Label: 63mm Eckmesserkopf ADKT 10T3 L40mm mit Innenkühlung Facts Diameter: 63 mm Overall length: 40 mm Weight: 0.44 kg Cutting angle: 90° Cutting edges: 7 Internal coolant: yes Torx key: T8 Torx screw: M2.5x5.5 ECLASS: 21181015 Special features Compatibility: ADKT 10T3 indexable inserts Suitable for inserts by Korloy Coolant-fed holder design Compact short-overhang configuration Fastening with Torx screw for secure seating FAQ What insert type is required for this holder? The corner turning head accepts ADKT 10T3 indexable inserts and has been specified for compatibility with Korloy insert variants. Is the tool suitable for coolant-through machining? Yes, the holder features internal coolant to deliver cutting fluid directly to the insert edge, improving cooling and chip control. What are the key dimensions affecting rigidity? Key dimensions are a 63 mm diameter and 40 mm overall length, contributing to a short overhang and increased stiffness for turning operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Corner Tool Head for ADMT 1204 Indexable Inserts, 90° Cutting Angle, M3x7 Clamp - Teknik Makina
Take advantage of a compact, high-stability tool head that combines a 90° cutting angle with a Ø63 mm head for repeatable corner turning; fast insert changes are enabled by the M3x7 Torx screw and T8 key. Order the corner turning head directly via Metav Werkzeuge or ask our consultants if needed. Corner turning head T217TM — compact head for ADMT 1204 indexable inserts, 90° cutting angle (Teknik Makina) Corner turning head T217TM provides a robust, space-saving solution for turning and facing operations with ADMT 1204 indexable inserts, designed for short overhangs and secure clamping in workshop and production environments. 90° cutting angle for accurate corner turning Compatible with ADMT 1204 indexable inserts Ø63 mm head diameter for stable machining 22 mm shank diameter for secure clamping Consistent corner geometry for reliable machining The head features a 90° cutting angle, combined with a Ø63 mm head diameter, which ensures stable contact at the cut and helps to maintain dimensional consistency across successive parts. The stable tool geometry reduces tool vibration and supports improved surface finish and repeatability. For operations where tight corner definition matters, this compact design helps to control cutting forces and supports predictable tool life. Fast serviceability and compact handling to reduce downtime Maintenance is straightforward thanks to the M3x7 Torx screw and matched T8 key, enabling quick insert changes without specialised tooling. The 22 mm shank and the short overall length (45 mm) make the head easy to clamp and manoeuvre in confined tool turrets or fixtures; the modest weight of 0.61 kg aids rapid indexing and reduces inertia on the turret. Together these features lower setup time and keep cycle interruptions to a minimum. Flexible compatibility for standardised tooling systems Designed for ADMT 1204 indexable inserts and indicated as suitable for Walter inserts, the head aligns with common insert inventories, reducing the need for special tooling stocks. The configuration supports multiple cutting edges and repeatable positioning, making it a pragmatic choice for job shops and production lines that favour standardised insert systems. Integration into existing tool setups is straightforward due to the conventional mounting dimensions and secure clamping interface. Contact Metav Werkzeuge to arrange delivery from Emmerich or to discuss how the Teknik Makina corner turning head T217TM can shorten setup times and standardise tooling across the workshop. Technical data Article number: T217TM Manufacturer: Teknik Makina Product: Corner turning head for ADMT 1204 indexable inserts Facts Head diameter: 63 mm Shank diameter: 22 mm Overall length: 45 mm Weight: 0.61 kg Cutting angle: 90° Cutting edges: 6 Torx screw: M3x7 Torx key: T8 Compatibility & features Compatible with ADMT 1204 indexable inserts Suitable for Walter inserts Brand: Teknik Makina FAQ What insert type does the head accept? The head accepts ADMT 1204 indexable inserts; the design is compatible with commonly stocked Walter inserts for straightforward replacement. What are the mounting dimensions for the tool head? The shank diameter is 22 mm and the overall length is 45 mm, enabling compact mounting in standard turrets and fixtures. How is the insert secured and replaced? Insert retention uses an M3x7 Torx screw; a T8 key is specified for removal and replacement, permitting quick servicing with minimal downtime. Is the head suitable for heavy-duty turning? The head’s Ø63 mm diameter and rigid geometry provide good stability for many corner turning tasks; check machine and process parameters for specific heavy-duty requirements. What is the product weight and how does that affect use? The unit weighs 0.61 kg, which helps to keep turret inertia low and supports rapid indexing during multi-position operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Corner Tool Head for ANKX 1706 Indexable Inserts with Internal Coolant, 45mm - Teknik Makina
Reliable machining performance and stable cycle times are achieved through the combination of integrated internal coolant and a secure Torx M5x12 fastening; pair the 63 mm body and 90° cutting geometry with ANKX 1706 indexable inserts for predictable tool life. Order the tool directly via Metav Werkzeuge or ask our consultants if needed. Corner tool head for ANKX 1706 indexable inserts – 63 mm, internal coolant (Teknik Makina) Corner tool head designed for turning and facing operations with ANKX 1706 indexable inserts, offering internal coolant for improved chip control and consistent surface quality Integrated internal coolant 63 mm diameter tool body Compatible with ISCAR ANKX 1706 inserts 90° cutting angle for stability Greater process stability through internal coolant and insert compatibility The design combines an integrated internal coolant channel with a compact geometry to support stable cutting conditions. By directing coolant to the cutting zone, heat is reduced and chip control is improved, which helps to prolong insert life and reduce secondary finishing. The component is optimised for ANKX 1706 indexable inserts, ensuring a precise seat and repeatable cutting position; this compatibility makes the head suitable for medium to heavy finishing where consistent dimensional control is required. Secure fastening and precise cutting geometry for repeatable results A proven clamping arrangement with Torx T20 actuation and an M5x12 screw secures the insert and keeps runout to a minimum, which is essential for high-repeatability turning operations. The 90° cutting angle offers a robust engagement and is beneficial where axial forces must be controlled. With five cutting edges available per insert position, the system supports efficient indexation and predictable changeover intervals, reducing unplanned downtime and improving overall throughput. Compact dimensions and balanced mass for reliable handling in machines The tool head’s 63 mm diameter and 45 mm overall length provide a compact footprint while maintaining sufficient stability for accurate machining. At 0.573 kg, the assembly combines low mass with structural rigidity, simplifying handling during tool changes and lowering spindle load where relevant. Compatibility with ISCAR inserts broadens application options across many workshops, supporting standardisation of tooling and easier stock management. Practical advantages for production environments Designed for integration into standard toolholder systems, the head supports quick indexable insert changes and routine maintenance. The internal coolant reduces the need for secondary interventions due to thermal distortion or built-up edge, delivering measurable gains in cycle reliability. For procurement, the consistent mechanical interfaces and Torx fixing simplify spare-part planning and toolroom routines, resulting in lower administrative and operational overheads while maintaining machining quality. For ordering or detailed technical consultation regarding Teknik Makina’s corner tool head (SKU T444-1TM), contact Metav Werkzeuge for tailored advice and secure supply from Emmerich — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data SKU: T444-1TM UID: T444-1TM Manufacturer: Teknik Makina Facts Diameter: 63 mm Overall length: 45 mm Weight: 0.573 kg Cutting edges: 5 Cutting angle: 90° Features Internal coolant Compatible with ANKX 1706 indexable inserts Suitable for ISCAR inserts Torx screw M5x12 Torx key T20 Product type: Corner tool head FAQ What inserts are compatible with this corner tool head? The corner tool head is designed for ANKX 1706 indexable inserts and is compatible with inserts from ISCAR as specified for the tooling system. Does the tool head provide coolant directly to the cutting edge? Yes, the head features integrated internal coolant that supplies fluid directly to the cutting zone to improve chip evacuation and reduce heat. Which fastener and key are used to secure the insert? Insert clamping is achieved with an M5x12 Torx screw driven by a Torx T20 key, ensuring a secure and repeatable fit. What are the main dimensions that affect tool setup? Key dimensions are a 63 mm diameter and a 45 mm overall length; the weight is 0.573 kg, which informs balance and mounting considerations. Is this head suitable for heavy-duty turning applications? With a 90° cutting angle and internal coolant, the head is suited to demanding finishing and medium-heavy turning tasks where stability and thermal control are important. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Corner Tool Head for AP-- 1604 Indexable Inserts L45mm With Internal Coolant - Teknik Makina
Benefit from the combination of a compact 63 mm body, a reliable 90° cutting geometry and integrated coolant for steady cycle times; order the T184-1TM angle head directly via Metav Werkzeuge or consult our specialists for application support. T184-1TM 63 mm Angle Head for AP--1604 Indexable Inserts (Internal Coolant) The T184-1TM angle head is a compact 90° indexable insert holder designed for precise shoulder and facing operations using AP--1604 inserts, with integrated internal coolant for controlled chip evacuation. 63 mm compact angle head Internal coolant for reliable chip control Compatible with AP--1604 Korloy inserts T15 Torx screw, M4x10 fastening Consistent 90° geometry for high-accuracy shoulder cuts The compact holder delivers a defined 90° cutting angle and a rigid support for the insert, ensuring reproducible shoulder faces and minimal runout. Built to accept AP--1604 indexable inserts from Korloy, the design focuses on dimensional reliability and reduced setup variability. The result is a measurable improvement in part-to-part consistency and lower rework rates, making the toolhead suitable where tight tolerances are required. Integrated coolant to extend tool life and stabilise cycles With internal coolant, the head directs cutting fluid close to the cutting edge to improve heat dissipation and chip control. This cooling strategy reduces thermal wear on the insert and can prolong edge life, especially during interrupted cuts or higher feed operations. Improved chip evacuation also contributes to cleaner contact surfaces and a steadier cutting process, which supports higher process uptime and fewer unscheduled tool changes. Secure clamping and compact form for machine versatility Engineered for robust assembly, the head uses a T15 Torx key and M4x10 screw for positive insert clamping, reducing the risk of movement under load. The compact overall length of 45 mm and a mass of 0.577 kg make it suitable for installations where space is limited and dynamic stability is important. The secure fastening and compact envelope help maintain cutting stability while enabling use on smaller tool turrets and tight machining cells. Shop-floor flexibility through compatibility and serviceability Designed with five indexed edges, the head provides multiple cutting positions for extended time between insert changes and quick index operations. Compatibility with AP--1604 Korloy inserts keeps tooling straightforward and inventory lean. Supplied with clear mounting and fastening details, the angle head supports efficient maintenance routines and predictable replacement cycles, all backed by Metav’s distribution and logistics to ensure reliable supply to the workshop. Contact Metav Werkzeuge for tailored technical advice on the Teknik Makina T184-1TM angle head and to arrange delivery from Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: T184-1TM Label: 63mm angle head AP--1604 L45mm with internal coolant Manufacturer: Teknik Makina ECLASS: 21181015 Core specifications Diameter: 63 mm Overall length: 45 mm Weight: 0.577 kg Number of usable edges: 5 Cutting angle: 90° Fastening screw: M4x10 Torx key: T15 Internal coolant: yes Features & compatibility Indexable insert type: AP--1604 Compatible insert manufacturer: Korloy Product type: angle head (indexable insert holder) SKU/UID: T184-1TM / T184-1TM FAQ What insert type fits this angle head? The angle head accepts AP--1604 indexable inserts; compatibility with Korloy inserts is specified for the T184-1TM. Does the head provide internal coolant delivery? Yes, the T184-1TM features internal coolant to support chip control and thermal management at the cutting edge. Which fastening elements are used for the insert clamp? Insert clamping on the head is secured with an M4x10 screw tightened using a T15 Torx key. How compact is the holder for tight setups? The head has a diameter of 63 mm, an overall length of 45 mm, and weighs 0.577 kg, making it suitable for installations with limited space. How many indexed edges are available per insert position? The configuration provides five usable edges, enabling multiple index positions before insert replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Corner Tool Head for APKT 1705 Indexable Inserts L45mm With Internal Coolant, 90° Cutting Angle - Teknik Makina
Combining the 90° cutting geometry, integrated internal coolant and a rigid 63 mm body, this corner turning head delivers consistent shoulder faces and extended insert life; order the component directly via Metav Werkzeuge or contact our consultants for cutting-tool integration support. Corner turning head for APKT 1705 indexable inserts — 63 mm, internal coolant The corner turning head for APKT 1705 indexable inserts is designed for precise shoulder and form turning in production and toolroom environments, featuring internal coolant and a compact L45 mm configuration. 63 mm diameter for high rigidity Integrated internal coolant delivery Compatible with Taegutec APKT 1705 inserts Secure Torx clamping with M4x10 screws Stable shoulder finishes through coolant-fed 90° geometry The integrated internal coolant works directly at the cutting edge, reducing heat and improving chip evacuation for a consistently superior surface finish. The tool’s 90° cutting geometry produces square shoulders with minimal hand‑finishing, which shortens cycle times and reduces rework. Where thermal control is critical, coolant-fed heads help maintain insert edge condition and extend tool life, translating into measurable productivity gains on repeat batches. Rigid 63 mm body for repeatable accuracy and secure clamping A sturdy 63 mm body combined with an L45 mm overall length provides enhanced rigidity during shoulder turning and light profiling. The tool accepts a Torx T15 key for maintenance and uses an M4x10 Torx screw for insert clamping, ensuring consistent seating and repeatable pitch. This mechanical stability reduces vibration, improving dimensional accuracy and extending the usable life of both inserts and the toolholder. Workshop-ready compatibility and easy integration Designed specifically for APKT 1705 indexable inserts and marked as compatible with Taegutec, the head fits into existing turning tool families without complex adaptations. The compact mass keeps spindle load predictable while the configuration supports rapid insert changes and straightforward inventory management. For traceability and ordering the reference SKU T554-1TM provides a clear identifier in procurement systems and tool libraries. For application guidance tailored to Teknik Cutting Tools’ robust design and to procure this corner turning head through Metav Werkzeuge, contact our specialists at Metav Werkzeuge in Emmerich for specification and integration support. Technical data SKU: T554-1TM Manufacturer: Teknik Cutting Tools Product type: Corner turning head Facts Diameter: 63 mm Overall length: 45 mm Weight: 0.52 kg Cutting angle: 90° Cutting edges: 6 Torx key: T15 Torx screw: M4x10 Internal coolant: yes ECLASS: 21181015 Special features For APKT 1705 indexable inserts Compatible with Taegutec inserts Integrated internal coolant Label: 63mm Eckmesserkopf APKT 1705 L45mm mit Innenkühlung FAQ What applications is this turning head best suited for? The corner turning head for APKT 1705 indexable inserts is optimised for shoulder turning and short‑overhang profiling where square faces and tight tolerances are required. Which inserts fit the tool and are any manufacturer recommendations given? This head accepts APKT 1705 indexable inserts and is listed as compatible with Taegutec inserts; follow the insert maker’s data for cutting parameters. How is the insert secured and how is coolant delivered? Insert clamping is via an M4x10 Torx screw tightened with a Torx T15 key, while the integrated internal coolant channel supplies lubricant directly to the cutting edge. Is the tool suitable for automated tool magazines and presetting? Yes, the compact L45 mm length and standard interface suit presetting and magazine handling in automated turning centres. What identifies this specific item for ordering or stock? Use SKU T554-1TM as the procurement reference when ordering or checking stock levels. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Corner Tool Head for BDMT 11T3 Indexable Inserts L40mm With Internal Coolant - Teknik Makina
Take advantage of the combination of stable cutting performance, integrated internal coolant and straightforward integration for efficient turning operations; order the holder directly via Metav Werkzeuge or consult our applications team for tailored advice. Corner cutter head T535-1TM – 63 mm indexable insert holder with internal coolant (for BDMT 11T3) by Teknik Makina The Corner cutter head T535-1TM is a compact indexable insert holder engineered for shoulder and corner turning applications with BDMT 11T3 inserts, offering internal coolant and a short overall length for confined setups. 63 mm diameter for stable machining Internal coolant for reliable chip evacuation Compatible with BDMT 11T3 indexable inserts Robust construction by Teknik Makina, SKU T535-1TM Stable machining for consistent surface quality The holder’s 63 mm diameter and compact geometry deliver improved rigidity during shoulder and corner cuts, which reduces chatter and helps achieve a consistent surface finish. Increased stability leads to fewer tool changes and more predictable cycle times, contributing to higher throughput on series parts. For workshops that prioritise repeatability, the robust design supports steady cutting parameters and reliable part tolerances. Enhanced process reliability through internal coolant Built-in internal coolant channels direct cutting fluid to the engagement zone, improving chip evacuation and cooling at the cutting edge. This focused coolant supply helps maintain cutting-edge temperatures and reduces built-up edge formation, extending insert life and lowering tooling costs per part. Fast, clean chip control also shortens secondary cleaning operations and supports uninterrupted production, making the toolholder a pragmatic choice for continuous turning tasks. Easy integration and broad insert compatibility Designed for BDMT 11T3 indexable inserts and compatible with inserts from Kyocera, the holder simplifies inventory and tooling decisions. The short overall length (40 mm) and modest mass support compact toolpost arrangements and reduce overhang. Assembly and index changes are straightforward with the specified Torx key T8 and M2.5x5.5 fastening screws, enabling quick insert swaps and minimal machine downtime. The compact footprint and standard interfaces make it suitable for both retrofit and new-tooling scenarios. For application-specific configuration and availability, contact Metav Werkzeuge for a consultation on the T535-1TM and assistance with lead times and logistics; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: T535-1TM Product type: Corner cutter head Model / designation: for BDMT 11T3 indexable inserts Manufacturer: Teknik Makina Diameter: 63 mm Overall length: 40 mm Shank / mounting diameter: 22 mm Weight: 0.527 kg Cutting angle: 90° Number of cutting edges: 7 Fastening screw: M2.5x5.5 Torx key: T8 ECLASS: 21181015 Internal coolant: yes Compatible insert type: BDMT 11T3 Compatible insert manufacturer: Kyocera Product label: 63mm Eckmesserkopf BDMT 11T3 L40mm mit Innenkühlung SKU / UID: T535-1TM / T535-1TM FAQ What insert type fits this holder? The holder accepts BDMT 11T3 indexable inserts; compatibility with Kyocera-manufactured inserts is indicated for reliable fit and performance. Is internal coolant available on the T535-1TM? Yes, the T535-1TM features internal coolant channels to improve chip evacuation and cooling at the cutting edge. Which fastening hardware is required for insert mounting? Insert retention uses screw type M2.5x5.5 with a Torx T8 drive for secure and repeatable clamping. Can the holder be used in compact or confined toolpost arrangements? With an overall length of 40 mm and a 63 mm diameter, the holder is designed for compact installations and reduced overhang. What are the key dimensional specifications to check before ordering? Refer to the 63 mm diameter, 40 mm overall length and 22 mm mounting diameter to ensure compatibility with the intended toolpost and machine setup. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Corner Tool Head for BDMT 1704 Indexable Inserts with Internal Coolant, 90° Cutting Angle - Teknik Makina
Take advantage of a compact, robust turning head that combines precise 90° geometry with internal coolant to improve tool life and cycle stability; its compatibility with BDMT 1704 indexable inserts and Kyocera tooling ensures fast retrofits and consistent results. Order directly via Metav Werkzeuge or consult our applications team for integration advice. Eckmesserkopf T539-1TM — 63 mm 90° corner turning head with internal coolant (Teknik Makina) The Eckmesserkopf is a compact 90° corner tool head engineered for external turning operations using BDMT 1704 indexable inserts, designed to deliver stable shoulder and face cutting in confined tool setups. 63 mm diameter for compact tool rigs Internal coolant improves chip control Compatible with BDMT 1704 inserts (Kyocera) 90° cutting angle for precise shoulders Consistent machining performance with compact geometry The turning head offers a precision 90° cutting geometry that keeps shoulder faces square and tolerances tight. Built around a 63 mm body and an overall length of 40 mm, the unit is engineered for installations where space is restricted but accuracy cannot be compromised. The 90° cutting angle reduces secondary operations and simplifies programming, while the provision of six indexed cutting edges per insert position extends service intervals. As a result, throughput increases without sacrificing surface quality or repeatability. Reliable coolant supply and mechanical integrity Equipped with internal coolant, the head channels cutting fluid directly to the insert seat to improve chip evacuation and reduce heat at the cutting zone. Direct coolant feed lowers cutting temperatures and helps maintain insert edge integrity, which in turn reduces wear rates and extends tool life. The holder secures inserts with an M4x10 Torx screw and is serviced using a T15 Torx key, providing a robust clamping interface that is straightforward to maintain and quick to change during toolset swaps. Seamless compatibility and production benefits Designed for BDMT 1704 indexable inserts and compatible with Kyocera tooling, the head supports standard tooling lines and simplifies inventory management. The compact format and positive clamping deliver stable cutting conditions that reduce vibration and improve surface finish, meaning fewer rework cycles and lower overall production cost per part. The assembly’s moderate mass (0.516 kg) balances rigidity with reduced spindle load, which makes it suitable for a wide range of lathes and turning centres. Contact Metav Werkzeuge today for application support and to discuss integrating the Teknik Makina 63 mm corner turning head into existing setups — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical data Article number: T539-1TM Product name: 63 mm Eckmesserkopf BDMT 1704 L40mm with internal coolant Brand: Teknik Makina Facts Diameter: 63 mm Overall length: 40 mm Shank / bore diameter: 22 mm Weight: 0.516 kg Cutting angle: 90° Number of cutting edges: 6 Torx screw: M4x10 Torx key: T15 Internal coolant: yes Special features Compatible with BDMT 1704 indexable inserts Insert supplier compatibility: Kyocera Compact design for confined tool positions Robust clamp interface for secure insert retention FAQ What inserts fit this turning head? The turning head accepts BDMT 1704 indexable inserts; it is specified for compatibility with Kyocera insert geometries. Is there coolant supply to the cutting edge? Yes, the head features internal coolant to feed cutting fluid directly to the insert seat and improve chip control. Which fastener is used to secure the inserts? Inserts are locked with an M4x10 Torx screw; a T15 Torx key is recommended for assembly and replacement. What is the overall length and diameter of the holder? The holder measures 40 mm overall length with a 63 mm body diameter, optimised for compact tool layouts. What is the SKU for ordering and reference? The product is listed as T539-1TM and branded by Teknik Makina for clear procurement identification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Corner Tool Head for LNHU 1306 Indexable Inserts 90° Cutting Angle, M4x10 Torx T15 - Teknik Makina
Take advantage of a compact, high-stability tool head that combines a precise 90° cutting angle with reliable compatibility for LNHU 1306 indexable inserts; order or request advice via Metav Werkzeuge for fast availability and production-ready support. Corner tool head T581TM — 90° cutting angle, for LNHU 1306 indexable inserts (Teknik Makina) The Corner tool head T581TM is a compact turning accessory designed to accept LNHU 1306 indexable inserts and to deliver repeatable corner cutting in workshop and light industrial turning applications 90° cutting angle for accurate corner cuts Compatible with LNHU 1306 indexable inserts 22 mm shank for secure mounting M4x10 Torx fastening, T15 key specification Consistent corner turning with measurable precision The head is engineered around a 90° cutting angle, which ensures predictable tool engagement and consistent results when producing shoulder faces or square shoulders. By accepting LNHU 1306 indexable inserts, the design permits rapid edge changes without time-consuming regrinds, translating into shorter cycle times and higher first-pass yield. The clear interface with established insert formats also supports straightforward spare-part logistics, lowering process risk in mixed-brand operations. Secure mounting and vibration‑resistant performance A firm connection to the toolpost is achieved via the 22 mm shank, while the unit’s 63 mm diameter and 40 mm overall length contribute to inherent stiffness and stable cutting. Fastening is executed with an M4x10 Torx screw, with a T15 key dimension specified for service operations; this standardised fastener arrangement reduces setup time and prevents inconsistent clamp forces. The balanced mass (approx. 0.628 kg) helps dampen chatter, supporting finer surface finishes and extended insert life in routine turning tasks. Practical handling that keeps shops productive Tool changes and maintenance are simplified by the straightforward fastening concept and the wide availability of compatible LNHU 1306 inserts from established suppliers. Compact dimensions make the head suitable for constrained turrets or multi‑station toolposts, while the conservative geometry supports predictable chip flow at typical turning feeds. For specification checks or to confirm fitment in a specific clamping system, Metav’s technical advisors are available to evaluate the application and recommend appropriate mating components. For reliable corner turning with Teknik Cutting Tools components, contact Metav Werkzeuge for product availability and application advice — Metav Werkzeuge can support selection, stock availability and fast dispatch from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: T581TM Brand: Teknik Makina Designation: Corner tool head for LNHU 1306 indexable inserts Fastening screw: M4x10 Torx key size: T15 Facts Diameter: 63 mm Shank diameter: 22 mm Overall length: 40 mm Cutting angle: 90° Number of cutting edges: 6 Weight: 0.628 kg Suitable inserts: LNHU 1306 Special features Compatible with Walter insert types Standard Torx fastening for simple maintenance Compact form for constrained tool stations FAQ Which inserts fit this corner tool head? The head accepts LNHU 1306 indexable inserts and is specified for compatibility with inserts from Walter and similar suppliers. What is the shank diameter needed for mounting? The tool head requires a 22 mm shank for correct mounting and stable engagement in the toolholder. Which screw and key are used for clamping the insert? Clamping uses an M4x10 Torx screw; the corresponding key size is T15. What are the main dimensions and weight of the unit? Key dimensions are 63 mm diameter, 40 mm overall length, and a mass of 0.628 kg. Is the cutting edge geometry suitable for shoulder and corner turning? Yes, the 90° cutting angle is intended for accurate shoulder and corner turning operations using LNHU 1306 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Corner Tool Head for VCGT 1604 Indexable Inserts 90° Cutting Angle, M4x10 Fastening - Teknik Makina
Combining a stable 90° cutting geometry with a secure Torx clamping system, this angle tool head delivers repeatable shoulder turning with VCGT 1604 indexable inserts. The compact 22 mm shank and 63 mm head diameter provide the rigidity required for consistent results and reduced vibration. Order the tool directly via Metav Werkzeuge or consult their specialists for application guidance. Angle Tool Head (Eckmesserkopf) for VCGT 1604 Indexable Inserts — 90° cutting, 22 mm shank (Teknik Cutting Tools) The Angle Tool Head is a precision turning head engineered for VCGT 1604 indexable inserts, optimised for reliable shoulder turning and fast, secure insert clamping Compatible with VCGT 1604 indexable inserts 90° cutting angle for precise shoulder turning 22 mm shank diameter for stable toolholder fit Torx M4x10 clamping with T15 key for secure fixing Consistent shoulder cuts through rigid geometry The head’s 90° cutting angle creates a defined cutting plane that supports consistent shoulder finishes and dimensional repeatability. Built with a 63 mm head diameter and a compact overall length of 52 mm, the design reduces free overhang and vibration, which translates into improved surface quality and fewer reworks. The result is a measurable contribution to process reliability: stable cutting geometry helps maintain cycle times and aids predictable tool life when paired with standard VCGT 1604 indexable inserts. Secure clamping for quick changeovers and low downtime Clamping is executed with an M4x10 Torx screw and a T15 key, delivering reliable fixation that withstands intermittent cutting forces. The 22 mm shank ensures consistent seating in conventional toolholders, while the head’s mass (approx. 0.538 kg) contributes to damping under load. Together these features simplify insert changes and maintenance routines, reducing machine downtime and keeping setup procedures straightforward for workshop staff and technicians. Simplified tooling and flexible workshop use Designed to fit common turning setups, the head accepts widely used indexable inserts and integrates smoothly into existing tooling families. The compact dimensions and standard clamping method reduce the need for special adapters, helping to consolidate inventory and streamline tool selection across turning applications. This compatibility supports a pragmatic approach to tooling management, allowing planners to rely on a small set of versatile components rather than a broad range of bespoke holders. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Cutting Tools angle tool head into the production line — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: T502TM Manufacturer: Teknik Makina Designation: Eckmesserkopf For inserts: for VCGT 1604 Indexable Inserts Facts Shank diameter: 22 mm Head diameter: 63 mm Overall length: 52 mm Weight: 0.538 kg Cutting angle: 90° Number of cutting edges: 5 Special features Torx screw: M4x10 Torx key size: T15 Compatible with VCGT 1604 indexable inserts FAQ What insert type does this turning head accept? The angle tool head accepts VCGT 1604 indexable inserts and is designed to secure them reliably for shoulder turning and facing tasks. How is the insert fixed in the holder? Fixing is performed with an M4x10 Torx screw using a T15 key to ensure secure clamping during operation. Which shank size is required for the toolholder? The head has a 22 mm shank, suitable for toolholders that accept that diameter and providing stable seating for reduced vibration. Is the head suitable for heavy interrupted cuts? The head’s rigid geometry and mass (approx. 0.538 kg) are intended to increase stability; suitability for interrupted cuts depends on machine setup and cutting data when using the VCGT 1604 inserts. What are the key dimensions to check before ordering? Essential dimensions include the 22 mm shank diameter, 63 mm head diameter and 52 mm overall length; the SKU for reference is T502TM from Teknik Cutting Tools. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Corner Tool Head for WNEX 0806 Indexable Inserts L40mm, 90° Cutting Angle - Teknik Makina
Benefit from the combination of 63 mm diameter rigidity, a precise 90° cutting angle and fast insert changes for uninterrupted turning operations; order the corner tool head directly via Metav Werkzeuge or contact our consultants for tailored advice. Corner tool head for WNEX 0806 indexable inserts — 63 mm, L40 mm (Teknik Makina) Corner tool head for WNEX 0806 indexable inserts is a compact, high-stability turning head engineered for corner cutting and finishing tasks in professional turning centres and workshop lathes. 63 mm diameter for enhanced rigidity Compatible with WNEX 0806 inserts YG‑1 Compact 40 mm overall length Torx T15 screw with M4x10 fixing Consistent accuracy through reduced overhang and rigid geometry The 63 mm body diameter combined with a 90° cutting angle ensures stable cutting conditions and reduces tool deflection during corner turning operations. The increased cross-section provides improved damping and rigidity compared with smaller heads, which translates into repeatable dimensional accuracy and a cleaner surface finish on each workpiece. As a result, cycle times remain predictable and scrap rates are minimised, supporting efficient production planning and process reliability. Quick insert changes and secure clamping to lower downtime Designed for WNEX 0806 indexable inserts, the head accepts inserts from the YG‑1 range and uses a Torx fastening system (T15) with an M4x10 fixing screw for secure seating. The Torx drive prevents cam‑out and allows precise torque application, so insert seating is consistent and service intervals are shortened. This combination of compatibility and dependable clamping supports faster tool changes and reduces non‑productive time on the shop floor. Compact design that fits tight setups without compromising strength With an overall length of L40 mm and a mass of 0.451 kg, the head keeps the centre of mass close to the spindle, lowering the effective overhang and the risk of vibration in constrained setups. The compact footprint is particularly beneficial for multi‑tool turrets and small lathes where space is limited but machining stability remains critical. The design therefore supports both high‑precision turning and robust everyday use in industrial environments. For reliable corner turning with minimal downtime, speak to Metav Werkzeuge about the Teknik Makina corner tool head (SKU T772TM) — our specialists in Emmerich can advise on compatibility and procurement: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: T772TM Manufacturer: Teknik Makina Facts Diameter: 63 mm Overall length: 40 mm Weight: 0.451 kg Cutting edges: 6 Cutting angle: 90° Special features For WNEX 0806 indexable inserts Compatible insert maker: YG‑1 Torx drive: T15 Fixing screw: M4x10 FAQ Is this head compatible with WNEX 0806 indexable inserts? Yes. The corner tool head T772TM is specifically designed for WNEX 0806 indexable inserts and accepts inserts from the YG‑1 range. What fastening system does the head use for insert clamping? Insert clamping is secured with a Torx T15 drive and an M4x10 screw for consistent seating and reliable torque transmission. Is the head suitable for machines with limited turret space? The compact L40 mm length and reduced overhang make the head suitable for turrets and small lathes where space is restricted while maintaining machining stability. How many indexed cutting edges are available on the head? The tool head provides six cutting edges, enabling multiple repositions of the insert before replacement. What is the weight of the tool head and how does this affect stability? Weight is 0.451 kg; the modest mass and short projection reduce vibration and improve stiffness for precise turning performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Corner Tool Head For XNEX 0806 Indexable Inserts 90° Cutting Angle, M4x12.5 Torx Screw - Teknik Makina
Benefit from a compact 22 mm shank and a precise 90° cutting angle for rigid, repeatable turning operations; the robust clamping with an M4x12.5 Torx screw minimises vibration and tool change time. Order the component directly via Metav Werkzeuge or ask the consultants for application guidance. Corner tool head T842TM by Teknik Makina — 22 mm shank, 90° cutting angle Corner tool head T842TM for XNEX 0806 indexable inserts, designed for rigid external and internal turning applications Compact 22 mm shank diameter for high rigidity Fits XNEX 0806 indexable inserts 90° cutting angle for precise corner geometries Compatible with SECO and WINSTAR inserts Delivering rigidity and consistent cutting performance The compact 22 mm shank and stout head diameter create a stable interface between machine and cutting edge, reducing micro‑vibration and improving surface finish. The 90° cutting angle is engineered for reliable corner turning and shoulder work, enabling consistent geometry on repeated parts. A secure clamping concept with an M4x12.5 Torx screw (Torx key T15) ensures the insert is held firmly, which translates into longer insert life and lower scrap rates. The result is measurable production efficiency and repeatability, especially where tight tolerances are required. Fast setup and broad insert compatibility to cut downtime Designed for XNEX 0806 indexable inserts, the holder accepts widely used formats from SECO and WINSTAR, reducing the need for special stocking and simplifying tool management. The tool head’s overall compactness (63 mm head diameter, 45 mm overall length) supports close‑quarters operations without sacrificing stiffness, so changeovers are quicker and set‑up times fall. This compatibility supports lean workshop logistics and helps maintain a continuous machining flow with fewer interruptions. Practical workshop benefits and maintenance clarity At approximately 0.49 kg, the unit is manageable for rapid tool changes while remaining robust enough for industrial use. The simple Torx fastening system requires only a T15 key, allowing maintenance staff to perform secure re‑clamping quickly and safely. Clear mechanical design reduces hidden maintenance steps: fewer adjustments mean predictable performance over many cycles. Where technical details are needed for CAM setup or tool library entries, the clear dimensional profile and standardised interface speed integration into existing processes. For tailored advice on integrating the Teknik Makina T842TM corner tool head into specific turning operations or to request procurement via Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical support and ordering assistance. Technical data Article number: T842TM Manufacturer: Teknik Makina Designation: Corner tool head for XNEX 0806 indexable inserts Torx screw: M4x12.5 Torx key required: T15 Compatible with: SECO, WINSTAR Core dimensions Shank diameter: 22 mm Head diameter: 63 mm Overall length: 45 mm Weight: 0.49 kg Cutting angle: 90° Cutting edges: 6 Special features Fits XNEX 0806 indexable inserts Compatibility with major insert brands SECO and WINSTAR Secure clamping with M4x12.5 Torx screw Compact design for close‑up turning operations FAQ Which inserts fit this tool head? The corner tool head accepts XNEX 0806 indexable inserts and is compatible with inserts from SECO and WINSTAR; the holder is designed to accommodate the standard insert geometry for that size. What fastening hardware is used for the insert? Insert clamping is achieved with an M4x12.5 Torx screw; a T15 Torx key is required for secure tightening and routine maintenance. Is the holder suitable for shoulder turning and external profiles? The 90° cutting angle and compact head geometry make the holder well suited to shoulder work and external corner turning where precise 90° forms are required. How does the shank diameter affect machining stability? A 22 mm shank provides a rigid connection to the tool post or turret, reducing vibration and improving surface finish and dimensional repeatability. Can existing SECO inserts be used without modification? Yes; existing SECO inserts in the XNEX 0806 format can be used directly, supporting quick changeover and simplified tooling stock management. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Planflächen schneller und präziser herstellen
Planfräser, auch als Planfräswerkzeug oder Stirnplanfräser bezeichnet, sind meist mit Wendeschneidplatten bestückte Trägerwerkzeuge für Fräsmaschinen. Sie ermöglichen das großflächige Abtragen von Material, das Planfräsen von Werkstücken auf Maß und die Erzeugung einer gleichmäßigen, planaren Oberflächenstruktur.
Wie das Planfräswerkzeug technisch wirkt und wann es unabdingbar ist
Ein Planfräswerkzeug arbeitet offen auf der Materialoberfläche, sodass Späne radial abgeführt werden. Bei Ausführungen ohne Innenkühlung erfolgt die Wärme- und Spanableitung über externe Kühlmitteldüsen oder zugeführte Druckluft; das ist bei vielen regulären Planfräsarbeiten ausreichend. Modelle mit Innenkühlung verfügen über integrierte Bohrungen und Kanäle, die Kühlschmierstoff oder Blasluft direkt an die Schneidkanten leiten. Diese gezielte Zufuhr verhindert thermische Überlastung, reduziert Aufbauschneidenbildung und spült Späne zuverlässig aus der Schnittzone – entscheidend bei schwerzerspanenden, klebenden Werkstoffen oder sehr großen Schnittbreiten.
Mehr Effizienz im Werkstattalltag durch gezielten Einsatz
- Reduziert Rüstzeiten durch modulare Bestückung mit Wendeschneidplatten und einfachem Plattenwechsel.
- Verbessert die Oberflächengüte durch gleichmäßige Spanabfuhr und, bei Bedarf, gezielte Innenkühlung.
- Erhöht die Standzeit der Werkzeuge, weil thermische Belastung und Aufbauschneidenbildung minimiert werden.
- Sorgt für konstante Maßhaltigkeit bei großflächigen Bearbeitungen dank stabiler Trägerwerkzeuge.
Metav als zuverlässiger Partner für Ihre Planbearbeitung
Metav steht für Demokratisierung der Präzision und kombiniert jahrzehntelange Fachkompetenz mit einem breiten Sortiment. Aus dem Lager in Emmerich liefert Metav als Qualitätsfilter ein Sortiment, das Werkstätten und Industrie mit technisch passenden Planfräsern versorgt. Mit über 48.000 zufriedenen Kunden und mehr als 250.000 Produkten bietet Metav die Auswahl und Verfügbarkeit, um die passende Ausführung — mit oder ohne Innenkühlung — für Ihre Bearbeitungssituation zu finden.
Kurz und prägnant
Ein Planfräser ist das zentrale Werkzeug, wenn große, ebene Flächen schnell, maßhaltig und mit hoher Oberflächenqualität herzustellen sind. Die Wahl zwischen ohne Innenkühlung und mit Innenkühlung richtet sich nach Werkstoff, Schnittbreite und Wärmeentwicklung.
FAQ
Wann ist ein Planfräser mit Innenkühlung erforderlich?
Bei schwerzerspanenden oder stark wärmeentwickelnden Werkstoffen sowie bei sehr großen Schnittbreiten empfiehlt sich ein Planfräser mit Innenkühlung, weil die gezielte Kühlschmierstoffzufuhr thermische Überlastung und Aufbauschneidenbildung verhindert.
Reicht bei normalen Stahlblechen ein Planfräswerkzeug ohne Innenkühlung aus?
Für viele reguläre Planfräsarbeiten an unlegierten und niedrig legierten Stählen ist ein Planfräswerkzeug ohne Innenkühlung ausreichend, da Späne offen radial abfließen und externe Kühlmitteldüsen oder Druckluft die Wärmeableitung übernehmen.
Wie verlängert man die Standzeit von Planfräsern effektiv?
Die Standzeit eines Planfräswerkzeugs lässt sich durch passende Wendeschneidplatten, richtige Schnittparameter, konsequente Spanabfuhr und bei Bedarf durch Innenkühlung deutlich erhöhen.
Welche Vorteile bieten modulare Planfräswerkzeuge im Produktionsalltag?
Modulare Planfräser ermöglichen schnellen Plattenwechsel, reduzieren Rüstzeiten und erlauben die Anpassung an unterschiedliche Schnittbreiten und Werkstoffe ohne kompletten Werkzeugwechsel.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com