Cost-effective HSS twist drills for reliable everyday metalworking
HSS twist drills from the Basicline provide a solid, economical solution for standard drilling tasks, offering dependable performance for unalloyed structural steel, cast iron, plastics and non-ferrous metals such as aluminium, copper and brass. Designed from high-speed steel for good toughness and wear resistance, they ensure clean centring, a dependable point geometry and smooth flute design for continuous chip evacuation, making them ideal for maintenance, repair and general assembly work. The Basicline focuses on core drilling performance without costly special coatings, delivering a strong price-to-performance ratio alongside consistent dimensional accuracy and operational safety.
6.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Introducing Twist Drill Type N (Short) — 6.5 mm · 135° · HSS-G · Bright Finished · DIN 338 The Twist Drill is a short Type N drill designed for precise metalworking with a 6.5 mm diameter, optimised for Drilling Machine applications. Short Type N Twist Drill for precise metal work HSS‑G material: faster drilling, less feed force 135° tip for harder materials such as stainless steel Fully ground shank for improved concentricity Conforms to DIN 338 for short cylindrical drills Faster penetration and lower feed force for demanding metalwork The HSS‑G construction delivers a clear performance advantage: up to 40% faster drilling and approximately 50% lower feed force compared with conventional HSS tools. This means less operator strain and reduced wear on both tool and machine when processing alloyed and unalloyed steel, cast steel and non‑ferrous metals. The 135° Tip is optimised for tougher materials, shortening dwell on the surface and improving centring on curved or hardened parts. For workshop environments where efficiency and repeatability matter, this design converts technical properties into measurable productivity gains. Short design for superior stability and precise holes Built to the DIN 338 definition of a short cylindrical drill, the reduced overhang of the Short version greatly increases rigidity and reduces bending. The shorter exposed length results in improved concentricity and less vibration during operation, which translates into cleaner hole geometry and longer tool life. Where tight tolerances are required, the reduced tendency to deflect ensures repeatable results even at larger diameters and higher spindle speeds. This stability makes the tool particularly suitable for stationary and portable Drilling Machine setups that demand both accuracy and throughput. Shank, finish and practical advantages at a glance The Fully Ground Shank provides excellent concentricity and secure clamping in chucks, while the Bright Finished surface aids chip evacuation and visual inspection for wear. With a Spiral Length of 63 mm and an overall length of 101 mm, the geometry balances cutting capacity and strength for common metalworking tasks. The Type N normal spiral is the classic geometry for metal drilling and is straightforward to resharpen, which keeps replacement costs down and simplifies workshop maintenance routines. These characteristics combine to offer a robust solution for professional metalworkers seeking a reliable, easy‑to‑use drill bit. Strong recommendation: choose the MetavCUT Twist Drill Type N short in HSS‑G for precision metal drilling; for technical advice or to confirm suitability for specific applications, METAV Werkzeuge offers expert consultation — Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271 Technical details Designation: Twist Drill Marke: MetavCUT SKU: 27065-FDA Diameter: 6.5 mm Tip angle: 135° Type: Type N Execution: Short Material: HSS-G Spiral length: 63 mm Overall length: 101 mm Shank execution: Fully ground Colour / Finish: Bright finished Application: Drills for metal Standard: DIN 338 Model series: Basic Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill Type N (Short) is primarily used for drilling high‑strength materials and larger diameters in metalworking. Designed for metal, this short HSS‑G drill excels when machining alloyed and unalloyed steel, cast steel, cast iron, sintered iron, tempered castings, non‑ferrous metals and hard plastics; its geometry and material make it resilient under greater loads. Which three drill types exist? Commonly distinguished drill types are Metal drill, Wood drill and Masonry/Concrete drill. The MetavCUT Twist Drill belongs to the Metal drill category and is optimised for metalworking tasks.
6.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated - MetavCUT
Twist Drill (Short, 6.5 mm) — HSS‑G, TIN‑coated, DIN 338 by MetavCUT, 118° point angle, fully ground shank A Twist Drill short HSS‑G bit designed for precise metal drilling in Drilling Machines, offering a TIN‑coating for reduced wear and conformity to DIN 338. Short design for increased stability TIN‑coated for reduced friction and wear HSS‑G material for high cutting speed 118° point angle for improved centring Conforms to DIN 338 for metalworking Greater accuracy through a short design and premium HSS‑G This short twist drill from MetavCUT combines a compact overall length with a fully ground HSS‑G body to deliver higher rigidity and precise hole quality. Because the outboard length is reduced, the bit shows less deflection under load, which directly benefits hole concentricity and dimensional accuracy when working with steel and other metals. The ground manufacturing process produces very sharp cutting edges and excellent runout accuracy, resulting in cleaner holes and reduced rework. Longer tool life and lower wear thanks to TIN coating A TIN‑coated surface significantly lowers friction at the cutting edges and helps dissipate heat when used with an appropriate coolant. This coating increases lifetime in metal applications and reduces adhesive wear, so the bit maintains geometry longer under continuous operation. For users who prioritise uptime and fewer tool changes, the TIN layer offers a measurable advantage during serial drilling tasks on alloyed and unalloyed steels, cast materials and non‑ferrous metals. Standards and production method ensure repeatable results Manufactured to DIN 338 as a short twist drill, this bit follows established dimensional and geometric specifications for cylindrical shank short drills. The designation HSS‑G (ground) indicates that the flutes and point geometry are produced by CNC grinding rather than rolling, which yields very sharp cutting lips and high concentricity. For operators this means reliably reproducible hole quality in stationary and portable drilling setups, provided cooling and correct feeds are applied. Application range and practical guidance for use Designed primarily as a Twist Drill for metal, the short HSS‑G geometry is suitable for alloyed and unalloyed steel, temper cast iron, cast iron, sintered iron, copper, bronze, nickel silver and hard plastics. The 118° point angle aids initial centring and is particularly helpful when working on slightly curved or softer surfaces such as aluminium, though feed and speed must be adapted per material. When drilling harder steels or deep holes consider appropriate cooling and gradual pecking to maintain tool life and hole quality. MetavCUT recommends this short Twist Drill for precision metalworking tasks; METAV Werkzeuge provides expert technical advice and application support — contact info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 for personalised assistance Technical Information Designation: Twist Drill (Short) Brand: MetavCUT SKU: 28065-FDA Diameter: 6.5 mm Point angle: 118° Type / Execution: short Coating / Colour: TIN‑coated Application: Drills for metal Spiral length: 63 mm Overall length: 101 mm Shank finish: fully ground Material: HSS‑G Norm: DIN 338 Series: Basic Line Suitable for: alloyed and unalloyed steel, temper cast iron, cast iron, sintered iron, copper, bronze, nickel silver, hard plastics Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill is primarily used for metalworking and is suitable for alloyed and unalloyed steel, cast iron, copper, bronze and hard plastics; its short design gives better stability for precise metal drilling operations. Why choose a TIN‑coated HSS‑G MetavCUT Twist Drill? A TIN‑coated HSS‑G MetavCUT Twist Drill reduces friction at the cutting edge, increases resistance to adhesive wear and therefore extends service life when drilling metals under appropriate cooling. For what are Twist Drills mainly applied? They are mainly applied in the machining of high‑strength materials and for larger drill diameters; the shape is relatively simple to grind and withstands higher loads. Which three drill types are there? The three common drill types are metal drills, wood drills and stone/concrete drills. Why are Twist Drills re‑pointed? Re‑pointing reduces the transverse cutting edge at the tip of a Twist Drill, lowering friction forces so less thrust is needed while improving the drill’s centring in the workpiece. Can a metal drill be used for wood? A metal drill can be used in wood but offers worse guidance and a less clean finish; however, such drill bits are easier to regrind and usually have a lower self‑feeding tendency. At which drilling depths is the Twist Drill the most used tool? For solid hole drilling, a Twist Drill is commonly used in diameters up to 20 mm and depths up to 100 mm; it is the most frequently applied tool for these ranges.
6.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Der MetavCUT HSS-G Spiralbohrer kombiniert Wirtschaftlichkeit, Stabilität und hohe Bohrgeschwindigkeit für zuverlässige Metallbearbeitung; die kurze Ausführung sorgt für bessere Rundlaufgenauigkeit und reduzierte Bruchgefahr, Bestellungen und technische Beratung sind direkt über Metav erreichbar. Spiralbohrer von MetavCUT – HSS-G Kurzausführung (Ø 6,8 mm) Spiralbohrer kurzausführung für präzises Bohren in Metall mit HSS-G, Typ N und 135° Spitzenwinkel HSS-G geschliffen für hohe Schnittgeschwindigkeit Kurze Ausführung für maximale Stabilität 135° Spitzenwinkel für harte Werkstoffe Geeignet für Handbohrmaschine und stationäre Maschinen DIN 338 konform, Basic Line Ausführung Hohe Leistung dank geschliffenem HSS-G für zügiges Arbeiten Die geschliffene HSS-G-Güte sorgt für ein bis zu 40 % schnelleres Bohren und benötigt 50 % weniger Anpresskraft gegenüber herkömmlichen HSS-Bohrern. Dadurch wird die Arbeit in legierten und unlegierten Stahlarten effizienter, ohne die Kontrolle zu verlieren. Für Werkstattbetriebe bedeutet das: kürzere Bearbeitungszeiten und weniger Belastung für Maschine und Bediener. Stabilität und Präzision durch kurze Ausführung und geschliffenen Schaft Weil die Auskraglänge reduziert ist, liefert die kurze Bauform eine deutlich höhere Stabilität und geringere Vibrationen beim Bohren in harten Materialien. Das führt zu saubereren Bohrbildern und besseren Toleranzen bei Passungen. Die geschliffene Schaftausführung unterstützt sicheren Halt im Bohrfutter und minimiert ein Verdrehen bei höheren Drehmomenten. Materialvielfalt und Anwendungsempfehlung für Metallbearbeitung Der Bohrer ist ausgelegt für legierten Stahl, unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff. Der 135° Spitzenwinkel erhöht die Standzeit bei zähen Werkstoffen wie Edelstahl, während die Typ-N-Normalspirale universelle Schneidkanten für viele Metallarten bietet. Für präzise Vorbohrungen empfehlen sich kurze Vorschübe und geeignete Kühlschmierstoffe. Bedienkomfort und Einsatz in der Werkstatt Dieser Kurzbohrer arbeitet zuverlässig in Handbohrmaschine und stationären Bohrmaschinen; die kompakte Länge reduziert das Spiel beim Einspannvorgang. Anwender profitieren von einfacher Handhabung beim Positionieren und geringerem Bruchrisiko bei manueller Führung. Für Serienarbeiten in der Werkstatt empfiehlt sich regelmäßige Kontrolle des Rundlaufs der Spindel zur Maximierung der Standzeit. Zielgruppe und wirtschaftlicher Nutzen für Betriebe Entwickelt für Handwerk, Montage und Kleinserienfertigung, bietet die Basic Line eine kosteneffiziente Lösung für Betriebe, die hohe Präzision ohne übermäßige Investition benötigen. Die Kombination aus Stabilität und hoher Schnittgeschwindigkeit senkt Fertigungskosten und erhöht die Produktivität bei wiederkehrenden Metallbohrungen. Setzen Sie auf Präzision mit dem MetavCUT HSS-G Spiralbohrer und fordern Sie Ihr persönliches Angebot per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 an, alternativ WhatsApp +49 170 2837271 Produktmerkmale Artikelnummer: 27068-FDA Marke: MetavCUT Serie: Basic Line Bezeichnung: Spiralbohrer Daten Durchmesser: 6,8 mm Gesamtlänge: 109 mm Spirallänge: 69 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Typ: Typ N (Normalspirale für Metall) Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) Ausführung: kurz (reduzierte Auskraglänge für Stabilität) Schaftausführung: geschliffen (vollständig geschliffener Schaft für sicheren Halt) Farbe: blank / bright finished Anwendung: Bohrer für Metall Für Bohrmaschine: Handbohrmaschine FAQ Welche Materialien lassen sich mit diesem Bohrer bearbeiten? Der MetavCUT Spiralbohrer aus HSS-G ist für legierte und unlegierte Stähle, Gusswerkstoffe, Nichteisenmetalle und Hartkunststoffe geeignet; bei besonders zähen Werkstoffen wie Edelstahl empfiehlt sich der Einsatz von Kühlschmierstoff und reduzierte Vorschubgeschwindigkeiten. Ist die kurze Ausführung für Handgebrauch geeignet? Ja, die kurze Ausführung bietet erhöhte Stabilität und ist speziell für manuelle Anwendungen in Handbohrmaschine sowie für stationäre Maschinen gedacht; sie verringert das Risiko von Verbiegen und Bruch gegenüber längeren Bohrern. Warum ist der 135° Spitzenwinkel vorteilhaft? Der 135° Spitzenwinkel des Spiralbohrers reduziert die Anbohrzeit in harten Werkstoffen und verbessert die Zentrierung auf gewölbten Oberflächen, wodurch die Standzeit bei robusten Metallarten erhöht wird. Entspricht der Bohrer einer Norm und welche Bedeutung hat das? Der Bohrer entspricht DIN 338, was die Klassifizierung kurzer Spiralbohrer mit Zylinderschaft definiert und damit Maßgaben für Länge, Form und Einsatzgebiet liefert; das garantiert Kompatibilität und reproduzierbare Leistung in der Fertigung. Welche Vorteile bringt die geschliffene Schaftausführung? Ein vollständig geschliffener Schaft gewährleistet präzisen Rundlauf im Futter und reduziert Rutscherscheinungen unter Last, was zu saubereren Bohrbildern und längeren Standzeiten führt.
6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Introducing the Twist Drill (Type N) by MetavCUT — 6 mm | HSS‑G | short | bright finished | 135° tip | DIN 338 A Twist Drill (Type N) designed as a short HSS‑G bit for precise metal drilling in drilling machines. Short design for increased stability and precision HSS‑G for faster drilling and lower feed force 135° tip angle for hard materials such as stainless steel Fully ground shank for secure clamping in drilling machines Conforms to DIN 338 for short twist drills Greater cutting efficiency for demanding metals Engineered with HSS‑G, this short bit delivers up to 40% faster drilling while requiring significantly less feed force compared with conventional HSS. The material composition improves heat resistance and edge retention, which means more consistent performance when working with alloyed and unalloyed steels, cast steel and non‑ferrous metals. For workshop applications where cycle time and tool life matter, the enhanced cutting properties provide a measurable productivity advantage without compromising hole quality. Stable drilling and improved centring in tight setups The reduced overall length and short projection increase stability and reduce deflection in confined or deep‑bore situations. Classified under DIN 338 as a short twist drill with a cylindrical shank, this geometry minimises runout and helps achieve more accurate concentricity on the workpiece. The combination of short design and a 135° tip angle is especially suitable for harder materials, reducing walking on curved surfaces and shortening the initial contact time. Optimised geometry for metalworking applications As a Type N (normal spiral) tool, the bit is tailored for standard metal drilling tasks. The 135° tip favours drilling into tougher metals such as stainless steel by providing a flatter cutting action that lowers the risk of chipping at the entry. The flute geometry ensures efficient chip evacuation during machining, which helps maintain consistent hole dimensions and surface finish when used in both stationary and portable drilling machines. Secure clamping and reliable handling The fully ground shank guarantees precise fitment in chucks and collets, reducing slippage and enabling safe high‑speed operation. A bright finished surface offers basic corrosion resistance and a smooth appearance while keeping dimensional accuracy. Where tool change speed and secure holding are essential, the ground shank and standard cylindrical form support dependable toolholding across a range of drilling machines. Choose the MetavCUT HSS‑G Twist Drill Type N for reliable, high‑performance metal drilling — for expert advice or technical support contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 27060-FDA Diameter: 6 mm Overall Length: 93 mm Spiral Length: 57 mm Tip Angle: 135° Type: Type N Material: HSS‑G Execution: short Shank Execution: fully ground Colour / Surface: bright finished Application: Drills for metal For Drilling Machine: Drilling Machine Model Series: Basic Line Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N used for? The MetavCUT Twist Drill Type N is primarily applied to machining high‑strength materials and larger hole diameters; it is designed for metalworking where stability and fast cutting are required. Its short form is easy to grind and withstands higher mechanical loads. Which three drill types exist? Common drill categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill group optimised for steel and similar materials. Why are Twist Drills pointed? Pointing reduces the cross‑cut at the tip of the Twist Drill, which significantly lowers friction and therefore the necessary feed forces. At the same time the sharpened tip improves centring in the Workpiece. Can the MetavCUT Twist Drill be used for wood? Metal drills like the MetavCUT Twist Drill can be used in wood, but they typically provide less guidance and a less clean finish than dedicated wood drills. They are easier to resharpen and have lower self‑feed behaviour. At which drilling depths is the Twist Drill most commonly used? A solid through‑hole is commonly produced with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The general notion that HSSE is always superior to HSS is not universally correct. Evaluate the working conditions carefully to decide whether the higher cost of HSSE is justified for the intended application.
6mm HSS-G Twist Drill DIN 338 ,short, TIN-coated - MetavCUT
Die Kombination aus HSS-G geschliffener Geometrie und TiN-Beschichtung sorgt für hohe Standzeit und schnelle Vorschübe, während die kurze Ausführung Verformungen minimiert und die Präzision erhöht. Für präzise Metallbearbeitung empfehlen wir den Kauf über Metav Werkzeuge oder die technische Beratung bei Fragen zur Anwendung. Spiralbohrer 6 mm (HSS-G, TIN-beschichtet) — kurze Ausführung von MetavCUT Spiralbohrer 6 mm von MetavCUT eignet sich für präzise Bohrungen in verschiedenen Metallen und Hartkunststoff und überzeugt durch Stabilität und verschleißarme Beschichtung. Spiralbohrer von MetavCUT HSS-G, geschliffen für präzise Bohrungen TiN-Beschichtung reduziert Verschleiß Kurze Ausführung für hohe Stabilität Norm DIN 338, Zylinderschaft Dauerhafte Leistung durch Materialwahl und Beschichtung Bei diesem Bohrer kommt HSS-G zum Einsatz, eine Schnellarbeitsstahl-Qualität, die im Verbund mit der TiN-Beschichtung deutlich geringeren Verschleiß bietet. Die Beschichtung reduziert Reibung und Hitzeentwicklung, was die Lebensdauer erhöht und das Risiko von Aufhitzungen beim Bohren in legierten Stählen mindert. Die geschliffene Oberfläche sorgt zudem für sehr scharfe Kanten und saubere Bohrungsränder, sodass weniger Nacharbeit erforderlich ist. Mehr Stabilität und Präzision durch kurze Ausführung Die kurze Ausführung bedeutet eine geringere Auskraglänge und damit weniger Neigung zum Verbiegen; das Resultat sind genaue Bohrbilder und verbesserter Rundlauf. Dadurch eignet sich dieser Spiralbohrer besonders für stationäre und handgeführte Maschinen, wenn Stabilität gefordert ist. Anwender profitieren von bis zu 40 % höheren Vorschubgeschwindigkeiten und einem reduzierten Anpressdruck gegenüber herkömmlichen HSS-Varianten. Vielseitige Einsatzfelder und Normkonformität Der Spiralbohrer erfüllt die Vorgaben der DIN 338 und ist für die Bearbeitung von legiertem und unlegiertem Stahl, Gusseisen, Temperguss sowie Nichteisenmetallen geeignet. Die Kombination aus Zylinderschaft und geschliffenen Spannuten macht ihn zur praktischen Wahl für Werkstatt und Produktion. Wer konsistente Bohrbilder in Metall verlangt, findet hier ein wirtschaftliches Werkzeug mit hoher Verlässlichkeit. Praxistipps für maximale Lebensdauer und Leistung Beim Einsatz von geschliffenen HSS-Bohrern empfiehlt sich die Nutzung einer geeigneten Kühlschmierung, um die Wärme abzuführen und den Verschleiß weiter zu reduzieren. Zur Zentrierung und für besonders exakte Bohrungen ist ein Anpunkten mit einem Zentrierbohrer ratsam. Die robuste Ausführung erlaubt zügiges Arbeiten, dabei sollte auf die richtige Schnittgeschwindigkeit und moderaten Vorschub geachtet werden, um Bruchrisiken zu minimieren. Für präzise Metallbearbeitung: Mit dem MetavCUT HSS-G Spiralbohrer sichern Sie sich langlebige Leistung und hohe Bohrgenauigkeit — bestellen Sie über Metav Werkzeuge oder kontaktieren Sie unsere technische Beratung per eMail info@metav-werkzeuge.com für Anwendungshinweise. Produktmerkmale Artikelnummer: 28060-FDA Marke: MetavCUT Serie: Basic Line Bezeichnung: Spiralbohrer Fakten Durchmesser: 6 mm Gesamtlänge: 93 mm Spirallänge: 57 mm Spitzenwinkel: 118° Besonderheiten Material: HSS-G Oberfläche: TIN-beschichtet (Titan-Nitrid) Schaftausführung: geschliffen Ausführung: kurz Norm: DIN 338 Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall Verpackungseinheit: 10 FAQ Wie unterscheidet sich der geschliffene HSS-G Spiralbohrer von gerollten Bohrern? Der geschliffene HSS-G Spiralbohrer von MetavCUT bietet schärfere Schneiden und höhere Rundlaufgenauigkeit als gerollte Varianten, was zu saubereren Bohrlöchern in Metall führt; dafür ist die Bruchneigung etwas höher, weshalb Kühlung und stationäre Aufnahme empfohlen werden. Für welche Materialien ist der TiN-beschichtete Spiralbohrer geeignet? Die TiN-beschichtete Ausführung der MetavCUT Spiralbohrer eignet sich für legierten und unlegierten Stahl, Gusseisen, Temperguss sowie Nichteisenmetalle und Hartkunststoff und reduziert dabei Reibung und Verschleiß. Ist dieser Bohrer für Handbohrmaschinen geeignet? Ja, der 6 mm Spiralbohrer entspricht der Standard-Größe für Hand- und stationäre Bohrmaschinen; die kurze Ausführung verbessert die Stabilität bei handgeführten Einsätzen und minimiert Verkantungsrisiken. Welche Vorteile bringt die Norm DIN 338 für Anwender? Die Einhaltung von DIN 338 gewährleistet standardisierte Abmessungen und Schaftgeometrie, sodass der MetavCUT Spiralbohrer zuverlässig in gängige Aufnahmen passt und reproduzierbare Bohrergebnisse liefert. Was bedeutet die Bezeichnung SKU 28060-FDA bei diesem Produkt? Die SKU 28060-FDA ist die eindeutige Artikelnummer für den MetavCUT Spiralbohrer in kurzer Ausführung und hilft bei Bestellung, Ersatzteilverwaltung und technischen Rückfragen.
7.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Drill Bit) – 7.5 mm, 135° tip, Type N, Bright Finished, Short, HSS‑G, DIN 338 by MetavCUT The Twist Drill short Type N drill bit is a precision metalworking drill designed for Drilling Machines, offering a 7.5 mm diameter and a 135° tip angle for robust performance in hard materials. Short Type N design for high stability HSS‑G: up to 40% faster drilling and less feed force 7.5 mm diameter with 135° tip for hard steels Fully ground shank for precise clamping Conforms to DIN 338 for short metal Twist Drills Faster metalworking through optimised HSS‑G performance The HSS‑G material provides a measurable efficiency advantage: according to manufacturer data this fully ground High Speed Steel formulation enables up to 40% faster drilling and requires roughly 50% less feed force compared with conventional HSS bits. This translates into shorter cycle times and reduced operator effort when machining alloyed and unalloyed steels, cast steels, cast iron, sintered iron, tempered castings, non‑ferrous metals and hard plastics. The result is higher productivity in workshops and production environments without sacrificing hole quality. Stability and precision thanks to the short DIN 338 format A short Spiral Length and reduced overhang, as defined by DIN 338, reduce deflection and vibration during drilling. This geometry improves concentricity and hole tolerances on stationary and portable Drilling Machines, making the bit especially suitable where rigidity matters. For precision tasks in metal fabrication or maintenance work, the compact design minimises chatter and bending, delivering cleaner holes and extending tool life through lower mechanical stress. Tip geometry and dimensions engineered for hard materials The 7.5 mm diameter combined with a 135° tip angle is tailored for harder materials such as stainless steel and other tough alloys. A larger tip angle increases the material contact area at the start of the cut, reducing the tendency to grab and shortening the initial penetration time. The Type N normal spiral is the classical metalworking profile, optimised for chip evacuation and consistent cutting in metallic substrates. The bit is bright finished for good surface consistency and chip flow. Secure clamping and simple regrinding for extended use The fully ground cylindrical shank guarantees accurate seating in chucks and collets, supporting repeatable concentricity and uncomplicated tool changes. Compared with rolled shank variants, a ground shank improves grip and reduces slippage under higher torque. Additionally, the straightforward geometry of this Twist Drill allows economical regrinding where appropriate, helping to extend service life and keep workshop costs down while maintaining acceptable hole quality. Practical applications and recommended user groups Designed for robust metalworking tasks, this short Twist Drill suits maintenance technicians, toolroom operatives and industrial workshops that require reliable, repeatable holes in steel and related materials. Its balance of stability, tip geometry and HSS‑G performance makes it a practical choice for production runs on Drilling Machines as well as precise repair and retrofit jobs where reduced runout and clean entry are important. METAVCUT’s Basic Line positions this bit as a dependable everyday tool for demanding metal applications. Strong recommendation from MetavCUT: choose this HSS‑G short Twist Drill for reliable metalworking performance, and contact METAV Werkzeuge for expert technical advice and application support — 📧 info@metav-werkzeuge.com — ☎️ +49 2822 7131930 — ✔️ WhatsApp +49 170 2837271 Twist Drill (Short Type N) Brand: MetavCUT SKU: 27075-FDA Diameter: 7.5 mm Tip angle: 135° Material: HSS‑G Norm: DIN 338 Execution: Short Spiral length: 69 mm Total length: 109 mm Shank: Fully ground Colour/Finish: Bright finished For machine: Drilling Machine Application: Drills for metal Model series: Basic Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill by MetavCUT suitable for and where is it best used? The MetavCUT Twist Drill short Type N is intended primarily for metalworking; its HSS‑G composition and Type N spiral make it well suited to alloyed and unalloyed steels, cast steels, cast iron, sintered iron, tempered castings, non‑ferrous metals and hard plastics, and it performs reliably in workshop and industrial drilling applications. How does the short design affect drilling results with the MetavCUT Twist Drill? A short format per DIN 338 reduces the exposed length of the bit, increasing stiffness and lowering the risk of bending; this improves concentricity and hole accuracy on Drilling Machines and is particularly advantageous for precision tasks and drilling in hard materials. For what are Twist Drills used? Twist Drills are mainly applied when machining high‑strength materials and larger diameters; this form is easy to regrind and withstands higher loads, making it a common choice for demanding metalworking and production tasks. Which three drill types are there? The main categories are metal drill bits, wood drill bits and stone/concrete drill bits.
7.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated - MetavCUT
Spiralbohrer 7,5 mm von MetavCUT (kurze Ausführung) Der Spiralbohrer von MetavCUT in kurzer Ausführung für präzise Metallbohrungen an handgeführten und stationären Maschinen MetavCUT Spiralbohrer 7,5 mm geschliffen TIN-beschichtet für erhöhte Lebensdauer HSS-G geschliffen für hohe Präzision kurze Auskraglänge für verbesserte Stabilität Geeignet für Stahl, Guss und Nichteisenmetalle Präzise Ergebnisse durch kurze Bauform und scharfe Geometrie Die kürzere Ausführung kombiniert geringe Auskraglänge mit HSS-G-Werkstoff und einem präzisen CNC-Schliff, was die Stabilität beim Bohren deutlich verbessert. Durch die reduzierte Neigung zum Verbiegen lassen sich saubere, runde Bohrlöcher erzielen, auch bei handgeführten Anwendungen. Die geschliffene Ausführung liefert schärfere Schneiden und eine bessere Rundlaufgenauigkeit, was in vielen Werkstätten zu messbar schnellerem Vorschub und zuverlässigen Passungen führt. Beschichtung reduziert Reibung und verlängert Standzeit Die TIN-Beschichtung (Titan-Nitrid) mindert Reibung und erhöht die Oberflächenhärte, sodass sich die Lebensdauer des Werkzeugs beim Bohren von Metallen verlängert. In Kombination mit geeignetem Kühlschmierstoff sinken Verschleiß und Wärmeentwicklung; das Ergebnis sind konstant saubere Bohrbilder und weniger Werkzeugwechsel. Gerade bei Serien- oder wiederholten Bohrungen im Metall zahlt sich die Beschichtung durch geringere Stillstandszeiten aus. Breites Einsatzspektrum für verschiedene Metallwerkstoffe Der Bohrer eignet sich zur Bearbeitung von legiertem und unlegiertem Stahl, Temperguss, Gusseisen, Sintereisen sowie Nichteisenmetallen wie Neusilber, Kupfer und Bronze; auch Hartkunststoff ist bearbeitbar. Für Werkstätten bedeutet das eine hohe Flexibilität: Ein Werkzeug deckt viele Anwendungen ab, reduziert Rüstzeiten und vereinfacht die Lagerhaltung. Durch die kurze Ausführung profitieren Anwender von besserer Spindelstabilität und geringerer Vibration bei variierenden Werkstücken. Norm, Spitzengeometrie und sichere Anwendungsempfehlungen Die Ausführung entspricht DIN 338, womit die Abmessungen und Toleranzen für kurze Spiralbohrer mit Zylinderschaft definiert sind. Der Spitzenwinkel von 118° ist ausgewogen für allgemeine Metallbearbeitung und erleichtert das Zentrieren in Standardmaterialien. Für höchste Maßhaltigkeit empfiehlt sich vor allem bei präzisen Passungen das Anpunkten mit einem Zentrierbohrer. Kühlung und moderates Vorschubverhalten schützen Schneide und reduzieren Bruchrisiko, besonders bei geschliffenen Bohrern. Empfehlung: Für präzise und zuverlässige Metallbohrungen empfiehlt MetavCUT den Spiralbohrer mit kurzer Ausführung – technische Beratung und Verfügbarkeit direkt bei Metav anfragen per info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 28075-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Basic Line Einsatzgebiet: Bohrer für Metall Norm: DIN 338 Fakten Durchmesser: 7,5 mm Gesamtlänge: 109 mm Spirallänge: 69 mm Spitzenwinkel: 118° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Oberfläche: TIN-beschichtet (Titan-Nitrid) Schaftausführung: geschliffen Ausführung: kurz Für Bohrmaschine: Handbohrmaschine FAQ Ist der Bohrer für Handbohrmaschinen geeignet? Ja. Der MetavCUT Spiralbohrer 7,5 mm (Basic Line, SKU 28075-FDA) ist für den Einsatz in Handbohrmaschinen vorgesehen; die kurze Ausführung verbessert dabei die Stabilität und reduziert Verkantungsrisiken im Vergleich zu langen Ausführungen. Für welche Materialien ist dieser Bohrer geeignet? Der Spiralbohrer von MetavCUT eignet sich für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen sowie Nichteisenmetalle wie Kupfer, Bronze und Neusilber; auch Hartkunststoff kann bearbeitet werden. Welche Vorteile bringt die TIN-Beschichtung? Die TIN-Beschichtung am MetavCUT Spiralbohrer reduziert Reibung, senkt Wärmeentwicklung und erhöht die Standzeit; in Verbindung mit Kühlschmierstoff führt dies zu weniger Verschleiß und konstanteren Bohrergebnissen. Worin unterscheidet sich die geschliffene Schaftausführung? Geschliffene Bohrer (HSS-G) haben schärfere Kanten und höhere Rundlaufgenauigkeit als gewalzte Varianten. Der Nachteil ist eine erhöhte Bruchanfälligkeit bei unsachgemäßer Handhabung, daher empfiehlt sich die Nutzung mit Kühlung und kontrolliertem Vorschub. Brauche ich ein Vorbohren oder Zentrieren für präzise Bohrungen? Für besonders präzise Passungen empfiehlt sich das Anpunkten mit einem Zentrierbohrer; allgemein lässt sich der 7,5-mm-Bohrer direkt einsetzen, wobei Zentrierung die Maßhaltigkeit weiter verbessert.
7.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Type N — 7.8 mm, 135°, HSS‑G, short, bright finished, DIN 338 The Twist Drill Type N short is a precision metal‑drilling bit for Drilling Machines, designed for stable, high‑performance machining of alloyed and unalloyed steels. HSS‑G fully ground for up to 40% faster drilling 135° tip for hard materials and stainless steel Short design for greater stability and accuracy Conforms to DIN 338 for standardised quality Bright finished surface for improved chip removal Precision and performance for demanding metalworking tasks The Twist Drill from MetavCUT is built in HSS‑G, a high‑speed steel grade that combines wear resistance with reliable cutting action. This fully ground design reduces required feed force and increases penetration speed, which translates directly into time savings on repetitive metalwork. The HSS‑G composition makes the bit especially suitable for Alloyed Steel, Cast Steel, Gusseisen and hard plastics, offering consistent cutting performance on tougher materials. Designed geometry that improves centring and reduces walking With a 135° tip angle and a Type N (normal spiral) geometry, this short twist drill delivers improved centring on flat and slightly curved surfaces and reduces the initial wander common with blunter tips. The larger tip angle is optimised for harder workpieces, shortening engagement time and stabilising the cut. Users benefit from easier pilot drilling and a more predictable drilling path, which supports accurate hole placement in precision assemblies. Short length for stability and repeatable accuracy The short execution per DIN 338 minimises overhang and bending, increasing rigidity during the cut. Reduced deflection yields cleaner holes and extends tool life by lowering side loads. This makes the bit particularly effective in bench and column drilling setups as well as in portable Drilling Machines where stiffness and repeatability are essential for production quality and reduced rework. Practical advantages and straightforward handling A bright finished surface promotes smoother chip evacuation and facilitates visual inspection of the flute geometry after use. The fully ground shank ensures secure clamping in standard chucks and steadier torque transmission. For maintenance, the tool can be resharpened easily while retaining its geometric advantages, so the bit remains a cost‑effective choice for workshops that perform frequent repairs and regrinds. Who benefits from this drill Workshop professionals, metal fabricators and maintenance technicians will appreciate the combination of stability, speed and material versatility. The MetavCUT basic line bit is aimed at users who require reliable, repeatable holes in demanding metalworking contexts rather than general‑purpose woodworking or masonry tasks. Choose MetavCUT HSS‑G Twist Drill Type N for faster, more controlled metal drilling — METAV Werkzeuge offers expert technical consultation if specifications need verification; contact info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical data Designation: Twist Drill Brand: MetavCUT SKU: 27078-FDA Diameter: 7.8 mm Tip angle: 135° Type: Type N Execution: short Material: HSS‑G Colour: bright finished Shaft finish: fully ground Spiral length: 75 mm Total length: 117 mm Application: Drills for metal Model series: Basic Line Suitable for: Drilling Machine Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the Twist Drill by MetavCUT Type N machine effectively? The MetavCUT Twist Drill Type N is intended primarily for metalworking; its HSS‑G composition performs well in alloyed and unalloyed steel, Cast Steel, Gusseisen, Sintereisen, non‑ferrous metals and hard plastics, providing reliable cutting action and good wear resistance. Is the MetavCUT Twist Drill Type N suitable for portable Drilling Machines? Yes, the short design and fully ground shank of the MetavCUT Twist Drill Type N increase stability and reduce bending, making it appropriate for both stationary and portable Drilling Machines where reduced overhang improves hole quality. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high‑strength materials and larger drill diameters. It is easy to resharpen and withstands higher loads, making it suitable for robust metalworking tasks. Which three drill types exist? The three main drill types are Metal Drill, Wood Drill and Stone/Concrete Drill. Why are twist drills sharpened (pointed)? Pointing reduces the cross‑edge at the drill tip, significantly lowering friction forces and thus reducing the required feed force; it also improves centring of the drill in the workpiece. Can a metal twist drill be used for wood? A metal twist drill can be used in wood but will generally give less precise guidance and a rougher finish; however, such drills are easier to resharpen and tend to have lower self‑feed characteristics. At which drilling depths is the twist drill most commonly used? A through hole is typically executed with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm the twist drill is the most commonly used tool. Which is better, HSS or HSSE? The general belief that HSSE steels are universally superior to HSS is not correct; the choice should be based on actual working conditions and whether those conditions justify the higher cost of HSSE.
7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Type N — MetavCUT short HSS‑G 7 mm, 135° tip, bright finished, DIN 338 The Twist Drill Type N short from MetavCUT is a precision HSS‑G 7 mm drill bit with a 135° tip angle, bright finished and fully ground shaft, engineered for metalworking on Drilling Machines. HSS‑G ground for up to 40% faster drilling 135° tip for hard and stainless steels Short design for higher stability and precision Fully ground shaft for improved concentricity Conforms to DIN 338 for short twist drills Faster machining with less effort thanks to HSS‑G technology Designed primarily for professional metalworking, this HSS‑G short Twist Drill delivers greater drilling performance and reduced operator effort. The ground finish of the cutting edges enables up to 40% faster penetration and requires significantly lower feed force compared with conventional HSS bits. Because the bit is short, it exhibits higher rigidity and reduced deflection, which directly improves hole accuracy when working in alloys, cast steels or temper cast materials. For users who prioritise efficiency on a Drilling Machine, this design translates into measurable time savings and more consistent results. Stable holes and reliable centring for demanding materials The 135° tip angle is chosen to perform reliably in harder materials such as stainless steel, where a blunter tip reduces wandering and shortens dwell time at the start of the hole. The Type N normal spiral geometry provides a universal flute form suited to metal drilling while the fully ground shaft improves concentricity and chuck clamping. Conforming to DIN 338 ensures consistent dimensions and manufacturing quality across the Basic Line series, so users benefit from reproducible drilling performance and predictable tool behaviour under higher loads. Optimised for metalworking applications and precise tasks Engineered for tasks where precision matters, this short Twist Drill is especially suited to drilling in unalloyed and alloyed steels, cast iron, sintered iron, non‑ferrous metals and hard plastics. The combination of Type N spiral geometry and the bright finished surface supports chip evacuation and prolongs tool life when paired with appropriate cutting fluid. Contractors, workshops and maintenance professionals will value the bit for producing clean, accurate holes in component manufacture, repair work and installation tasks. Practical handling, compatibility and supplier support The reduced overall length and the short spirallength improve handling and reduce the tendency to chatter in handheld and bench Drilling Machines. The fully ground shaft simplifies clamping and increases runout accuracy, which benefits threaded hole preparation and reaming follow‑up. If there is uncertainty whether this Twist Drill Type N suits a specific machine or material, METAV Werkzeuge provides extensive and competent advice to help select the right tool or to supply additional technical data. Choose the MetavCUT Twist Drill Type N for reliable metal drilling performance, and contact METAV Werkzeuge for expert advice by email info@metav-werkzeuge.com or by phone +49 2822 7131930 — WhatsApp available at +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 27070-FDA Type: Type N Diameter: 7 mm Tip angle: 135° Material: HSS‑G Standard: DIN 338 Execution: short Colour: bright finished Shaft finish: fully ground Spiral length: 69 mm Overall length: 109 mm Application: Drills for metal / Drilling Machine compatibility Model series: Basic Line Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for? The MetavCUT Twist Drill Type N is mainly used for machining high‑strength materials and larger drill diameters; its geometry and HSS‑G composition make it suitable for alloyed and unalloyed steel, cast steel and similar tough materials, and its form is relatively easy to re‑grind while withstanding greater loads. Which 3 drill types are there? Commonly distinguished drill types are: Metal drill bits, Wood drill bits and Stone/Concrete drill bits, with the MetavCUT Twist Drill Type N belonging to the metal drill category.
7mm HSS-G Twist Drill DIN 338 ,short, TIN-coated - MetavCUT
MetavCUT Twist Drill (Short, 7 mm, 118°, TiN-coated, HSS-G, DIN 338, Fully ground shank) The MetavCUT Twist Drill is a short Twist Drill engineered for precision metal drilling, offering a 7 mm diameter, a 118° tip angle and a TiN coating for longer tool life. Short design for increased stability 7 mm Diameter for precise holes 118° Tip Angle for easier penetration TiN-coated HSS for extended tool life Fully ground shank for fast drilling High performance and measurable efficiency for metalworking The MetavCUT Twist Drill combines a short design with HSS-G material and a TiN-coated surface to reduce friction and extend service life. The ground geometry delivers up to 40% faster drilling and requires 50% less feed force compared with conventional HSS drills, which directly reduces operator effort and cycle times. The TiN coating further lowers wear when used with an appropriate cooling system, making the tool particularly suitable for alloyed and unalloyed steel, Tempered Cast Iron and other non-ferrous metals. Precision, stability and guidance in every hole A reduced overall length and a shortened overhang increase stability and reduce deflection, so holes come out more accurate on both stationary and portable machines. The fully ground shank and ground flutes ensure excellent centring and a clean chip evacuation pattern, translating to improved surface finish and repeatable hole quality. The 118° tip angle supports reliable penetration on slightly softer metals and reduces walking on curved surfaces. Clear application range and machining recommendations This short Twist Drill is optimised for drilling into metals such as steel, Cast Iron, Sintered Iron, Copper, Bronze and Hard Plastics. Use with a suitable Drilling Machine or a stable hand drill at the correct speed for the material; cooling is recommended for tougher alloys to maximise lifetime. The drill conforms to DIN 338, which specifies short cylindrical-shank high-speed steel drills; the ground manufacturing process (HSS-G) provides sharp cutting edges and high run-out accuracy, best exploited under rigid clamping and controlled feeds. Who benefits and why this design matters Workshop professionals and production technicians will appreciate the tool’s combination of precision and durability. The short geometry suits tasks requiring minimal vibration and exact hole placement, for example in jig work or when working close to edges. Because the cutter is easier to regrind than some other types, maintenance and refurbishment are straightforward, making this an economical choice for repetitive machining of medium-hard materials. We recommend the MetavCUT short TiN-coated Twist Drill for demanding metalworking tasks; METAV Werkzeuge offers expert technical advice and support if you are unsure whether this tool meets your requirements — contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Technical information Designation: Twist Drill Brand: MetavCUT SKU: 28070-FDA Diameter: 7 mm Overall length: 109 mm Spiral length: 69 mm Tip angle: 118° Type / Execution: Short Material: HSS-G Surface / Coating: TiN-coated Shank finish: Fully ground Suitable for: Drilling Machine / Hand drill Application: Drills for metal Standard: DIN 338 Model series: Basic Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? A Twist Drill such as the MetavCUT Twist Drill is primarily used for machining high-strength materials and larger bore diameters; its design can be ground easily and withstands significant loads, making it suitable for steels and other hard materials. Which three drill types exist? The three primary drill types are metal drills, wood drills and stone/concrete drills, each optimised for material-specific cutting geometry and chip removal behavior.
8.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Introducing the Twist Drill — Short Type N, Ø 8.5 mm, HSS‑G, DIN 338 A Twist Drill Short Type N designed for precise metalworking with drilling machines and hand drills, ideal for demanding steel and non‑ferrous applications. Short design for increased stability HSS‑G enables up to 40% faster drilling 135° point angle for hard materials Fully ground shank for precise centring Conforms to DIN 338 for consistent quality Faster metalworking with reduced effort and longer productivity The HSS‑G alloy of this Short Twist Drill delivers tangible performance advantages: studies and manufacturer data show up to 40% faster drilling and about 50% less feed force compared with conventional HSS drills. This translates directly into lower operator fatigue and higher throughput in production or workshop environments. For operators working with alloyed and unalloyed steel, cast steel, cast iron, sintered iron, tempered castings, non‑ferrous metals and hard plastics, the reduced cutting resistance means cleaner holes and fewer rejects, improving overall efficiency. Stability and precision for demanding metal applications Because this drill is a short design according to DIN 338, it offers higher Stability and less tendency to bend compared with longer variants. The compact overall length and solid geometry make it particularly suitable for precise bores on Drilling Machines and for use in confined setups where runout must be minimised. The result is improved hole quality and repeatability, especially when machining harder materials where rigidity is crucial. Optimised geometry and what the numbers mean for your work With a Diameter of 8.5 mm, a Spiral Length of 75 mm and an Overall Length of 117 mm, this Short Twist Drill Type N features a 135° point angle that eases entry into hard materials such as stainless steel. The Type N normal spiral is the classic metalworking geometry, developed to balance chip removal and cutting edge strength. For less experienced users: a larger point angle reduces the tendency to grab and shortens the time to pierce hard surfaces, while the fully ground Shank improves centring and reduces vibration for a cleaner hole. Durable finish, easy resharpening and professional support The bright finished surface and fully ground Shank ensure consistent seating in chucks and easy inspection after use. The Basic Line manufacturing approach focuses on reliable performance and straightforward resharpening when required, so workshop maintenance remains simple. For questions on suitability, machining parameters or resharpening advice, METAV Werkzeuge offers competent consultation and technical support to help match tooling to your exact requirements We recommend MetavCUT’s Short Twist Drill Type N with HSS‑G for precision metal drilling — for tailored technical advice and ordering assistance contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Technical Details Designation: Twist Drill (Short, Type N) Brand: MetavCUT SKU: 27085-FDA Diameter: 8.5 mm Point angle: 135° Material: HSS‑G Standard: DIN 338 Overall length: 117 mm Spiral length: 75 mm Shank finish: Fully ground Colour: Bright finished Execution: Short Model series: Basic Line Application: Drills for Metal For use with: Drilling Machine (Hand drill compatible) Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? A Twist Drill, such as the Short Type N from MetavCUT, is mainly used for machining high‑strength materials and larger hole diameters; its classic spiral form is easy to resharpen and withstands higher loads while delivering reliable bore quality in steels and other metals. Which three drill types exist? The main drill categories are Metal Drills, Wood Drills and Masonry/Concrete Drills; the MetavCUT Short Twist Drill Type N belongs to the Metal Drill family, optimised for steels and similar materials. Why are Twist Drills sharpened? Twist Drills like the MetavCUT Short Type N are sharpened to reduce the cross‑cut area at the tip, which lowers friction and required feed force while improving centring and entry into the workpiece.
8.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated - MetavCUT
Twist Drill Basic Line — Twist Drill, 8.5 mm, 118° tip, Short, TIN-coated, HSS-G, DIN 338 The Twist Drill Basic Line is a short HSS-G twist drill for Drilling Machine use, optimised for precise metalworking. Short design for increased stability and accuracy TIN-coated surface for reduced wear and longer life Fully ground shank for superior concentricity Conforms to DIN 338 for short cylinder-shank drills Precision and durability for metalworking tasks The Twist Drill Basic Line combines a short design with HSS-G material to deliver greater stability when drilling metal. The reduced overhang lowers the risk of bending, so holes are truer and repeatability improves. This results in more accurate component assembly and fewer rejects in production. The TIN-coated finish diminishes friction and enhances surface hardness, extending tool life under cyclic loads and when used with appropriate cooling. Faster drilling with lower feed forces Thanks to the fully ground geometry and optimised flute design, this short twist drill requires noticeably less axial force during cutting. Users benefit from up to 40% faster penetration in many ferrous materials compared with conventional HSS options, while feed effort is reduced by roughly 50%, making manual drilling on a Drilling Machine easier and more controlled. The 118° tip angle aids centring on semi-soft materials while maintaining good chip evacuation in metalworking. Designed for demanding metal applications Engineered in accordance with DIN 338, this short twist drill is suitable for alloyed and unalloyed steel, cast iron, sintered iron, copper, bronze, and hard plastics. The short spiral length improves stability for hard materials and larger diameters, making it a practical choice for workshop and industrial settings. Use with coolant is recommended to maximise life and maintain cutting performance, particularly when machining tough or heat-sensitive alloys. Who benefits and how to integrate it into workflows Workshops and maintenance departments that prioritise precision and repeatability will appreciate the Basic Line short twist drills. The 8.5 mm diameter and 117 mm overall length (with a 75 mm spiral length) fit many standard setups and can be used in portable Drilling Machines as well as stationary machines. For best results, clamp workpieces securely, apply suitable cutting fluid, and select appropriate spindle speed for the material being drilled. MetavCUT recommends the Twist Drill Basic Line for precise metal drilling; for tailored technical advice or to confirm suitability for specific materials and thicknesses, contact METAV Werkzeuge – comprehensive consulting is available via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Basic Line (short) Brand: MetavCUT SKU: 28085-FDA Diameter: 8.5 mm Spiral length: 75 mm Overall length: 117 mm Tip angle: 118° Material: HSS-G (ground High Speed Steel) Shank: Fully ground (geschliffen) Coating/Colour: TIN-coated (Titanium Nitride) Intended machine: Drilling Machine (Handbohrmaschine compatible) Standard: DIN 338 Application: Drills for metal / Bohrer für Metall Execution: Short (kurz) Model series: Basic Line Manufacturer: MetavCUT Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Basic Line best used for and which materials suit it? The Twist Drill Basic Line from MetavCUT is optimised for drilling metal; it performs well in alloyed and unalloyed Steel, Cast Iron, Sintered Iron, Copper, Bronze and Hard Plastics when used on a Drilling Machine and preferably with coolant to reduce wear. Can the MetavCUT Twist Drill Basic Line be used in handheld drills? Yes, the MetavCUT Twist Drill Basic Line can be used in compatible Hand Drilling Machines, but its short design and ground geometry are particularly beneficial in stable setups or where rigidity and precision are required. What are Twist Drills used for? Twist Drills are primarily applied to the machining of high-strength materials and larger drill diameters; their form is easy to resharpen and withstands higher loads, making them suitable for demanding metalworking tasks. Which 3 drill types exist? There are three main drill categories: Metal drills, Wood drills, Stone/Concrete drills.
8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Type N short – 8 mm, HSS‑G, 135°, bright finished (DIN 338) by MetavCUT The Twist Drill Type N short is a high‑performance metal drilling bit for drilling machines, designed for precise, stable holes in steel and other hard materials. Short design for high stability when drilling metal Ground HSS‑G for up to 40% faster drilling 135° tip angle optimised for harder materials Fully ground shank for secure clamping and concentricity Faster, easier drilling thanks to ground HSS‑G and optimized geometry The HSS‑G construction of this Twist Drill delivers tangible productivity gains: the ground High‑Speed Steel enables up to 40% faster drilling while requiring around 50% less feed force than conventional HSS tools. With an 8 mm Diameter and a 135° Tip Angle, this bit penetrates hard materials more reliably, reducing dwell time and wear on the tool. For professionals focused on cycle time and repeatable results, the combination of material and geometry translates directly into increased throughput and lower operator effort. Stable, precise holes from the short design and fully ground shank A shorter Overall Length and a fully ground shank improve rigidity and reduce deflection during drilling. This Twist Drill’s compact execution is particularly suitable for work on lathes, milling centres and hand drilling machines where tool overhang must be minimised. The result is cleaner hole walls and better positional accuracy, which benefits fabrication, assembly and maintenance tasks that demand tight tolerances. Built for metalworking — Type N normal spiral explained This Type N Normal Spiral is the classic configuration for metal drills and was chosen for its balanced chip evacuation and cutting action. According to DIN 338, the short design with a cylindrical shank is intended for robust, stationary or portable drilling in metal. For users less familiar with the terminology: Type N means a general‑purpose metal drill, and short refers to reduced length for improved stiffness and repeatability. Practical advantages and who benefits most Workshop technicians, maintenance crews and metal fabricators will appreciate the combination of durability and ease of use: the bright finished surface improves initial seating and handling, while the 75 mm Spiral Length and 117 mm Overall Length match typical requirements for through and blind holes in plate and component work. For demanding alloys, cast materials and engineering plastics the tool offers longevity and predictable performance, making it a dependable choice for daily production tasks. MetavCUT recommends this HSS‑G short Type N Twist Drill for professional metalworking — for tailored advice or to confirm suitability for your application contact METAV Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Data Designation: Twist Drill Brand: MetavCUT SKU: 27080-FDA Diameter: 8 mm Tip angle: 135° Material: HSS‑G Type: Typ N Execution: short Shank finish: fully ground Spiral length: 75 mm Overall length: 117 mm Colour: bright finished For drilling machine: Drilling Machine Standard: DIN 338 Model series: Basic Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills like the MetavCUT Twist Drill Type N are primarily used for the machining of high‑strength materials and for larger drill diameters. The short, ground HSS‑G design makes this Twist Drill robust under heavy loads and suitable for applications where fast penetration and durability are required. Which 3 drill types are there? The main categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for use in metalworking applications.
8mm HSS-G Twist Drill DIN 338 ,short, TIN-coated - MetavCUT
MetavCUT Twist Drill (Short Twist Drill) — 8 mm, 118°, TIN-coated, Short, DIN 338, HSS-G The MetavCUT Twist Drill is a short Twist Drill designed for precise metalworking with an 8 mm diameter and a 118° point angle for reliable centring in a wide range of metals. MetavCUT Twist Drill short 8 mm TIN-coated for reduced friction and longer life HSS-G fully ground for precise metal drilling 118° Point angle for reliable centring Conforms to DIN 338 for short twist drills Faster, more precise metal drilling with reduced effort The short design delivers higher stability and less deflection compared with longer drills, which translates into cleaner holes and fewer rejects when working with metal. The HSS-G (ground high-speed steel) geometry enables up to 40% faster drilling and requires around 50% less feed force than conventional HSS drills; this reduces operator fatigue and shortens cycle times in production environments. The combination of short overhang and a fully ground flute results in improved runout accuracy, especially when used in a stable drilling set-up such as a drilling machine. Durable coating and optimised geometry for longer tool life A TIN-coated surface significantly lowers friction and helps to reduce wear when machining alloyed and unalloyed steels, cast materials and non-ferrous metals. With appropriate cooling, the Titanium Nitride layer increases service life and keeps cutting edges sharper for longer, so fewer tool changes are needed. The 118° point angle eases centring on slightly curved or coated surfaces and balances entry aggressiveness with edge strength, which is beneficial when drilling materials like aluminium, copper and hard plastics. Engineered for metal: materials and standards explained Conformity to DIN 338 indicates this tool is a short twist drill with a cylindrical shank manufactured from HSS and produced either by grinding or rolling; the MetavCUT version is ground, which provides very sharp cutting edges and high concentricity. Ground drills excel in metalworking because the flute geometry and primary cutting edges are precise, producing accurate hole dimensions and improved surface finish. Note: ground HSS drills can be more brittle than rolled types and perform best with steady clamping and adequate cooling. Practical use cases and operator guidance This Twist Drill is intended primarily for drilling metal on stationary or portable drilling machines and is suitable for machinists, toolrooms and maintenance shops requiring reproducible, high-quality holes. For best results use moderate spindle speeds, apply a suitable coolant for steels and clamp the workpiece securely. The fully ground shank eases chuck gripping and reduces slippage. If uncertain whether this drill meets specific requirements or if additional technical data is needed, METAV Werkzeuge offers expert support and consultation to help select the correct tool and machining parameters. We recommend the MetavCUT short Twist Drill for precision metalworking — for personalised advice contact METAV Werkzeuge by email info@metav-werkzeuge.com or phone +49 2822 7131930 (WhatsApp +49 170 2837271) Technical Specifications Designation: Twist Drill Marke: MetavCUT SKU: 28080-FDA Diameter: 8 mm Point angle: 118° Type / Execution: short Coating / Colour: TIN-coated Spiral length: 75 mm Overall length: 117 mm Shank execution: fully ground Material: HSS-G Standard: DIN 338 Application: Drills for metal For drilling machine: drilling machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? The MetavCUT Twist Drill is mainly applied to the machining of high-strength materials and larger diameters; its shape is easy to regrind and it withstands significant loads, making it especially suitable for metalworking and demanding applications. Which three drill types exist? Drill types are commonly categorised as metal drills, wood drills and stone/concrete drills, with the MetavCUT Twist Drill belonging to the metal drill category and optimised for that purpose. Is there anything else you need to determine whether this tool suits your process? Are additional dimensions or speed recommendations required? METAV Werkzeuge provides comprehensive and competent advice — feel free to contact us by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271
9.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Der kurze Spiralbohrer 9,5 mm von MetavCUT vereint die HSS-G-Schneidleistung mit einem 135° Spitzenwinkel und bietet dadurch schnellere Bohrfortschritte und bessere Führung bei harten Werkstoffen; sichern Sie präzise Ergebnisse für Stahl- und Eisenarbeiten direkt über Metav oder fragen Sie unsere technische Beratung bei Bedarf an. Spiralbohrer 9,5 mm (HSS-G, kurz) von MetavCUT Der Spiralbohrer 9,5 mm ist ein kurzer, geschliffener HSS-G Bohrer für präzise Metallbohrungen an Handbohrmaschine und stationären Maschinen Geschliffener HSS‑G für schnellere Zerspanung Kurze Ausführung für hohe Stabilität Spitzenwinkel 135° für harte Werkstoffe DIN 338 konform: kurze Spiralbohrer Zylinderschaft, geschliffen, für Handbohrmaschine Hohe Standzeit und effizientere Bohrleistung bei Stahl Aufgrund der HSS-G-Ausführung lässt sich das Bohrbild deutlich verbessern: die geschliffene Schneide reduziert den Schnittwiderstand und ermöglicht ein bis zu 40 % schnelleres Bohren bei gleichzeitig bis zu 50 % geringerer Anpresskraft gegenüber herkömmlichen HSS-Bohrern. Für Anwender bedeutet das weniger Erschöpfung bei Handarbeiten und kürzere Taktzeiten in der Werkstatt. Diese Eigenschaft macht den Bohrer besonders geeignet für legierte und unlegierte Stahlwerkstoffe sowie für Guss und Temperguss. Kompakte Bauform für präzise Führung und weniger Schwingung Die kurze Bauform nach DIN 338 sorgt für eine geringere Auskraglänge und somit für eine höhere Stabilität bei der Bearbeitung. Dadurch wird die Gefahr des Verkantens und des Wanderns reduziert, was zu saubereren Bohrbildern führt. Bei 9,5 mm Durchmesser empfiehlt sich der Einsatz in stationären Säulenbohrmaschinen oder gut geführten Handbohrmaschinen, wobei die geschliffene Schaftausführung die Spannkraft im Bohrfutter optimiert. Zielgruppe und typische Einsatzfelder in Werkstatt und Industrie Angesprochen sind mechanische Werkstätten, Instandhaltungsteams und anspruchsvolle Heimwerker, die robuste Metallverbindungen herstellen müssen. Der Typ N Normalspirale ist konzipiert für Metall, Eisen und Stahl, außerdem geeignet für Nichteisenmetalle und harte Kunststoffe. Der Bohrer erfüllt Anforderungen bei Montagearbeiten, Maschinenbauinstandsetzung und Seriennachbearbeitung, wo Präzision und Standzeit entscheiden. Praktische Anwendungstipps für längere Lebensdauer und besseres Ergebnis Für saubere Ergebnisse empfiehlt sich ein an das Material angepasster Vorschub und die Nutzung geeigneter Kühlschmierstoffe bei Stahl und Guss. Der 135° Spitzenwinkel erleichtert die Anbohrung in harten Werkstoffen wie Edelstahl und reduziert Auffasen, während bei hohen Präzisionsanforderungen ein Anpicken mit Zentrierbohrer die Position sicherstellt. Vermeiden Sie tiefe Durchmesser-zu-Längen-Verhältnisse und reinigen Sie die Spanräume regelmäßig, um ein Verstopfen zu verhindern. Mit dem MetavCUT HSS‑G Bohrer erzielen Sie zuverlässige Präzision bei Stahlarbeiten — sichern Sie sich dieses Werkzeug über Metav und kontaktieren Sie unsere technische Beratung per eMail info@metav-werkzeuge.com für Details zur Anwendung. Produktmerkmale Artikelnummer: 27095-FDA Marke: MetavCUT Serie: Basic Line Bezeichnung: Spiralbohrer Daten Durchmesser: 9,5 mm Gesamtlänge: 125 mm Spirallänge: 81 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) Schaftausführung: geschliffen (vollständig geschliffener Zylinderschaft) Ausführung: kurz (höhere Stabilität, geringere Auskraglänge) Typ: Typ N (Normalspirale für Metall) Farbe: blank (helle Oberfläche) Für Bohrmaschine: Handbohrmaschine / stationäre Aufnahme FAQ Wie unterscheidet sich der HSS‑G Spiralbohrer von anderen HSS‑Bohrern? Der MetavCUT Spiralbohrer in HSS‑G Ausführung hat eine geschliffene Schneide, die im Vergleich zu Standard‑HSS schneller schneidet und geringere Anpresskräfte benötigt, was bei Stahl und Guss zu längerer Standzeit führt. Eignet sich dieser Bohrer für Edelstahl? Ja, durch den 135° Spitzenwinkel ist der Spiralbohrer von MetavCUT besonders geeignet für harte Werkstoffe wie Edelstahl; der größere Winkel reduziert das Einlaufen und verbessert die Anbohrung. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Der kurze, geschliffene Zylinderschaft des Spiralbohrers ist für Handbohrmaschine geeignet, liefert jedoch beste Ergebnisse bei stabil geführten Bohrungen oder in stationären Säulenbohrmaschinen. Welche Serienbezeichnung und SKU hat dieses Produkt? Das Produkt gehört zur Basic Line von MetavCUT und ist unter der Artikelnummer 27095-FDA gelistet. Wie vermeide ich Brüche bei dünnen Bohraufgaben mit dem 9,5 mm Bohrer? Empfohlen wird sauberer Spanabtransport, moderater Vorschub, gegebenenfalls Kühlschmierstoff sowie bei hoher Präzision ein Vorbohren oder Zentrieren, um seitliches Wandern zu verhindern.
9.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated - MetavCUT
Twist Drill (Short) – 9.5 mm, 118° tip, TIN-coated, HSS-G, DIN 338 A Twist Drill in short execution for precise metalworking on drilling machines, designed to combine stability and long tool life. Short HSS-G Twist Drill for higher stability TIN-coated for extended tool life Fully ground shank for accurate centring DIN 338 classification for metal machining 118° tip angle for reliable entry Greater Precision through Reduced Overhang and Higher Rigidity The short execution of this Twist Drill provides a significantly reduced overhang, which directly increases Stability and reduces the risk of bending under load. Shorter protrusion from the chuck leads to consistently better roundness and hole accuracy when machining Metal, making the tool particularly suitable for demanding workshop and industrial tasks. This shorter geometry supports precise alignment on rotating and stationary drilling machines without compromising hole quality or surface finish. Longer Service Life and Lower Wear with TIN Coating A TIN-coated surface extends tool life by reducing friction and improving heat resistance during high-speed metal drilling. The HSS-G base material paired with the Titanium Nitride layer ensures that cutting edges remain sharper for longer, especially when combined with an appropriate cooling system. This combination reduces abrasive wear and helps maintain dimensional accuracy in legged and unalloyed steel, cast materials, copper, bronze and hard plastics, resulting in fewer tool changes and more consistent production runs. Faster Cutting and Lower Feed Force for Efficient Production Thanks to the fully ground HSS geometry, this short Twist Drill permits up to 40% faster drilling while requiring approximately 50% less axial feed force compared with conventional HSS drills. The CNC grinding process produces very sharp cutting lips and excellent runout characteristics, which improve chip evacuation and hole quality. For demanding metalworking operations, these characteristics reduce machining time and operator effort while increasing throughput on production lines. Norm Compliance and Recommended Working Conditions Manufactured according to DIN 338 for short spiral drills with cylindrical shanks, this tool meets industry standards for dimensions and tolerances, ensuring compatibility with common chucks and fixtures. The 118° tip angle provides reliable entry and is well suited for a range of metals and general-purpose machining; cooling is recommended to exploit the TIN coating and HSS-G material fully. For best results, use in stationary or well-supported drilling setups and consider coolant when machining tougher alloys to maintain tool life and hole quality. Strong recommendation from MetavCUT: select this short Twist Drill for precision metal machining—METAV Werkzeuge offers expert consultation and technical support via email info@metav-werkzeuge.com, telephone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 28095-FDA Diameter: 9.5 mm Tip Angle: 118° Execution: short Colour: TIN-coated Application: Drills for metal Spiral Length: 81 mm Overall Length: 125 mm Shank Execution: fully ground Material: HSS-G Standard: DIN 338 Compatible Machine: Drilling Machine Model Series: Basic Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit the MetavCUT Twist Drill? The MetavCUT Twist Drill is mainly applied when machining high-strength materials and larger drill diameters; it performs well in alloyed and unalloyed steel, temper-cast parts, cast iron, sintered iron, copper, bronze and hard plastics. Its short design and HSS-G composition favour precise industrial drilling operations and longer tool life under suitable cooling. Which three drill types exist? The main categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal-drill family and is optimised for drilling in metallic and hard synthetic materials.
9mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — MetavCUT Basic Line, 9 mm, 135° Tip, HSS‑G (Short, Bright Finished, DIN 338) The Twist Drill is a short HSS‑G metalworking drill designed for Drilling Machines and handheld use, offering high feed efficiency and stable performance in demanding steel applications. Short design for stable, precise drilling 9 mm diameter for common metalworking tasks 135° tip for improved centring in hard materials Fully ground shank for accurate seating in chucks Conforms to DIN 338 for short twist drills Faster penetration and reduced feed effort for hard metals The HSS‑G composition delivers a clear advantage: up to 40% faster drilling and roughly 50% less thrust compared with conventional HSS bits. For users working with alloyed and unalloyed Steel, Cast Steel, Gusseisen and hard plastics, this means fewer tool changes and smoother cycles. The 135° tip angle reduces the tendency to wander on tough surfaces and shortens dwell during initial engagement. This results in more efficient machining and less operator fatigue. Short geometry for superior stability and hole quality A short overall length and a spiral length of 81 mm minimise overhang and vibration, producing more consistent hole geometry under moderate cutting conditions. The fully ground shank ensures solid clamping in chucks and better concentricity, improving finish and reducing runout. Because the flute length and geometry follow DIN 338, workshop operators benefit from predictable behaviour when switching between comparable short twist drills. Built for metalworking workshops and maintenance tasks This Type N twist drill is the classic choice for metal applications and is optimised for Drilling Machines as well as robust handheld units. Its bright finished surface eases chip evacuation in many metals while remaining straightforward to resharpen when needed. For maintenance engineers, toolroom technicians and small fabrication shops, the combination of 9 mm diameter and short design strikes a balance between versatility and rigidity. Industry standard compliance delivers reproducible results Manufactured to DIN 338 specifications within the MetavCUT Basic Line, this twist drill follows proven dimensional and performance criteria for short cylinder‑shank bits. The Type N normal spiral provides a versatile chip geometry for a wide range of metallic materials. If uncertainty remains about the correct geometry or material choice for a specific application, the short tip geometry and HSS‑G grade allow straightforward regrinding while maintaining performance. We recommend the MetavCUT Twist Drill from the Basic Line for precision metalworking where stability and efficient penetration matter most — for technical questions or selection support contact METAV Werkzeuge for expert advice: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Data Bezeichnung: Twist Drill Marke: MetavCUT SKU: 27090-FDA Durchmesser: 9 mm Spitzenwinkel: 135° Typ: Type N Ausführung: short Farbe: bright finished Material: HSS-G Schaft Ausführung: fully ground Gesamtlänge: 125 mm Spirallänge: 81 mm Anwendung: Drills for metal Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill suitable for? The MetavCUT Twist Drill (Type N, HSS‑G) is primarily intended for metalworking; it performs well in alloyed and unalloyed Steel, Cast Steel, Gusseisen and certain hard plastics, offering reliable penetration and chip formation for these materials. How does the short design of the MetavCUT Twist Drill benefit workshop use? A short Twist Drill from MetavCUT reduces overhang and vibration, improving hole accuracy and concentricity; the compact geometry is especially helpful for precise operations and when working with harder materials where deflection must be minimised. For what is a Twist Drill used? A Twist Drill is mainly employed for machining high‑strength materials and larger drill diameters; this form is easy to resharpen and endures higher loads. Which three drill types exist? The main categories are Metal Drills, Wood Drills and Stone/Concrete Drills. Why are Twist Drills sharpened at the tip? Tip sharpening reduces the cross‑cut at the drill tip, lowering friction and thus reducing required feed force while improving centring in the workpiece. Can a Twist Drill be used to drill wood? A Metal Drill can be used in wood, but guidance and finish are inferior compared with dedicated wood drills. Metal drills are easier to resharpen and show less self‑feeding tendency. For which drilling depths is the Twist Drill most commonly used? Twist Drills are the standard choice for through‑hole drilling. For diameters up to 20 mm and depths up to 100 mm they are the most frequently used tool. Is HSS better than HSSE? The common belief that HSSE is always superior to HSS is incorrect; selection should consider the specific working conditions and whether the extra cost of HSSE is justified. Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – wir stehen Ihnen gerne zur Verfügung. 📧 eMail: info@metav-werkzeuge.com ☎️ Telefon: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271
9mm HSS-G Twist Drill DIN 338 ,short, TIN-coated - MetavCUT
Twist Drill — Short HSS-G Drill, 9 mm, 118° point, TIN-coated, DIN 338, fully ground, MetavCUT A short Twist Drill designed for precise metal drilling with Drilling Machines Short design for increased stability and precision TIN-coated surface for reduced wear and friction HSS-G fully ground for faster drilling and clean holes 118° point angle for easy centring in softer metals Conforms to DIN 338 for consistent manufacturing quality Durable HSS-G Construction for Longer Tool Life The HSS-G base material combined with a TIN-coated surface delivers extended lifetime when working with metallic materials. This composition reduces surface wear and friction, so heat buildup is minimised during continuous drilling. The coating supports improved tool life particularly under intermittent cooling, while the substrate material retains cutting edge stability for demanding machining tasks. Short Design and Fully Ground Geometry for Precise Results A shorter overall length reduces overhang and increases stability, which directly improves concentricity and reduces vibration during drilling. The fully ground flute geometry creates sharper cutting edges, enabling up to faster penetration with lower feed forces compared to rolled types. The 118° point angle favours centring and controlled entry in softer metals and certain non-ferrous alloys while still offering reliable starts on slightly curved surfaces. Optimised for Metalworking and Professional Use Designed for use with Drilling Machines, this tool excels in machining alloyed and unalloyed steel, Tempered Cast Iron, Gusseisen, Sintered Iron, Copper, Bronze and hard plastics. Workshops and maintenance professionals benefit from consistent hole quality and reduced rework. The tool’s characteristics make it particularly suitable for precision tasks where minimized runout and reproducible hole tolerances matter. DIN 338 Standard and Practical Handling Advice Manufactured to DIN 338, the tool follows industry definitions for short Twist Drills with Cylindrical Shanks. Being ground rather than rolled results in sharper edges and higher runout accuracy, but also a slightly increased susceptibility to fracture under improper handling. Use appropriate coolant for extended tool life and prefer stationary or well-supported setups to exploit the drill’s precision advantages. Strongly recommend MetavCUT’s short TIN-coated HSS-G Twist Drill for demanding metalworking tasks — for expert advice and application support contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com | ☎️ +49 2822 7131930 | ✔️ WhatsApp +49 170 2837271 — METAV Werkzeuge offers extensive and competent consultation for technical queries and product selection Bezeichnung: Twist Drill Marke: MetavCUT SKU: 28090-FDA Durchmesser: 9 mm Spitzenwinkel: 118° Gesamtlänge: 125 mm Spirallänge: 81 mm Ausführung: short Schaft Ausführung: fully ground Farbe / Beschichtung: TIN-coated Material: HSS-G Norm: DIN 338 Für Bohrmaschine: Drilling Machine Anwendung: Drills for metal Modellserie: Basic Line Hersteller: MetavCUT Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill is mainly applied to the machining of high-strength materials and larger drill diameters; its short design and robust geometry make it suitable for demanding metalworking tasks. The tool’s shape allows relatively easy resharpening and it withstands considerable loads while delivering clean, precise holes. Which three drill types exist? The common classification names three main categories: Metal drills, Wood drills and Masonry/Concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for the properties and requirements of metallic materials.
Reliable performance for everyday drilling
The basicline hss twist drills offer a cost-effective, dependable entry into classic metal drilling. Designed for routine workshop and maintenance tasks, these economy hss twist drills combine proven material choice with practical geometry to deliver consistent, process-safe results.
How basicline hss twist drills work in industrial practice
Manufactured from HSS (high-speed steel) and organised within a three-tier range (basicline, standard line, profi line), the basicline tools focus on essentials: robust toughness, a practical point geometry and smooth chip evacuation. They are suited to less complex standard drilling operations in maintenance, semiprofessional production and general assembly work, where efficient, repeatable holemaking matters more than specialist coatings or exotic alloys.
Key technical data
- material: high-speed steel (HSS)
- suitable for: unalloyed structural steel, soft iron, plastics, aluminium, copper, brass
- geometry: solid point angle; cleanly ground tip for easy centring
- flute design: smooth spiral flute for continuous chip evacuation
- range position: economy entry level within a three-stage product concept (basicline / standard line / profi line)
Key advantages for workshop and maintenance teams
- Improved efficiency through reliable drilling behaviour and stable centring.
- Reduced tool inventory complexity by covering common materials with one tool family.
- Low total cost of ownership via a pragmatic focus on core performance rather than costly special treatments.
- Simplified operation thanks to a clean grind and consistent chip removal, lowering rework.
- Versatility across day-to-day tasks in repair, installation and light production environments.
Why Metav is the sensible choice for your tooling needs
Metav stands for democratisation of precision. With decades of expertise, a central quality filter in Emmerich and a broad portfolio, Metav supplies the right basicline hss twist drills alongside extended workshop equipment to keep operations running. Over 48,000 customers trust Metav’s consistent quality and reliable fulfilment from a single, well-stocked partner.
Summary: basicline hss twist drills in one line
The basicline hss twist drills deliver straightforward, dependable drilling for everyday metalworking and maintenance tasks, combining HSS durability with practical geometry for efficient, measureable results.
FAQ
What materials are basicline hss twist drills suitable for?
The basicline hss twist drills are suitable for unalloyed structural steel, soft iron, various plastics and non-ferrous metals such as aluminium, copper and brass.
How do basicline hss twist drills differ from the standard line?
basicline hss twist drills prioritise essential tool geometry and cost-effectiveness; the standard line is aimed at more frequent industrial use and the profi line at specialised, demanding applications.
Which workshop tasks benefit most from basicline hss twist drills?
Routine maintenance, general assembly, repair work and semiprofessional production tasks benefit most from the reliable centring and chip evacuation of the basicline hss twist drills.
Can these drills be used for precision holemaking?
basicline hss twist drills provide consistent, size-stable holes for standard applications; for high-precision or specialist materials, consider the standard line or profi line options.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com