Profi Line twist drills for extreme industrial performance
Profi Line twist drills are designed for continuous, heavy-duty drilling in automated CNC and industrial metalworking, delivering maximum tool life and process reliability when machining high-strength steels, stainless alloys and tough titanium grades. These high-performance tools, made from high-speed steel (HSS) often enriched with 5% or 8% cobalt, combine precision ground flutes with advanced coatings such as TiN and TiAlN to reduce friction and extend wear resistance. An optimised 135° point angle and cross-ground tip ensure excellent self‑centring, reduced required feed force and clean chip evacuation, enabling precise bores without pre‑spotting on smooth surfaces. Trusted in machine, tool and plant construction, the Profi Line provides outstanding stand time and drilling consistency for demanding series production.
4.6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Profi Line – 4.6 mm, 135° Point, Type N, Bright Finished, Short, HSS‑G, DIN 338 A Twist Drill (Type N) designed as a short HSS‑G metal drill for high‑precision work in hard materials using drilling machines. Short design for higher stability and precision HSS‑G ground for sharp, clean metal holes 135° point angle for hard materials and stainless steel Conforms to DIN 338 for short cylinder shank drills Drill harder materials faster with less feed force The HSS‑G ground geometry delivers high cutting performance: because the flute geometry is ground, the Cutting Edge is exceptionally sharp and the tool achieves up to 40% faster drilling while requiring 50% less feed force compared with conventional HSS drills. This results in shorter cycle times and less operator effort when machining alloyed and unalloyed Steel. For demanding metalworking tasks the ground geometry also improves runout and produces clean, precise Holes that reduce rework. Short overall length for higher rigidity and precision A reduced Overall Length and a shorter Projection significantly lower deflection during drilling. With a Spiral Length of 47 mm and a Gesamtlänge (Overall Length) of 86 mm, the compact design increases Stability, especially when drilling with a Drilling Machine or on stationary equipment. The Type N normal spiral is optimised for general metalworking, providing reliable chip removal and predictable behaviour when entering and exiting the workpiece. Targeted for metalworking professionals and workshop use This Profi Line short Twist Drill is intended for machinists, toolrooms and maintenance workshops that require reproducible, precise holes in materials such as Steel, Cast Iron, Tempered Cast, Sintered Iron, Non‑Ferrous Metals and Hard Plastics. The compact form factor is particularly useful in fixtures and jigs where access is limited. If a manual Drilling Machine is used, the short design lowers chatter and improves operator confidence during series production. Ground vs rolled: what to expect and how to use it “Ground” means flutes and geometry are produced by CNC grinding rather than roll forming; the result is very sharp cutting edges and high concentricity, which produce cleaner holes in metal. However, ground HSS tools can be more brittle than rolled types and benefit from controlled cooling and moderate feed rates; they are best used on stationary machines with appropriate coolant when drilling deeper or harder materials. For safe and durable operation, ensure correct clamping and cooling, and avoid excessive side loads. Choose the MetavCUT Profi Line short Twist Drill for dependable precision in metalworking — for technical advice or to confirm suitability for your application contact METAV Werkzeuge: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Technical data Designation: Twist Drill (short) Marke: MetavCUT SKU: 48046-FDA Diameter: 4.6 mm Point angle: 135° Type: Type N Execution: short Colour / Finish: Bright Finished Shaft finish: Fully Ground Spiral length: 47 mm Overall length: 86 mm Material: HSS‑G Standard: DIN 338 Intended use: Drills for metal / for Drilling Machine Model series: Profi Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The Twist Drill (MetavCUT Profi Line Type N) is primarily used for machining high‑strength materials and larger hole diameters; its ground geometry is easy to re‑grind and withstands greater loads, making it suitable for demanding metalworking tasks where clean, precise holes are required. Which 3 drill types exist? Common drill categories are Metal drill, Wood drill and Stone/Concrete drill; the MetavCUT Profi Line short Twist Drill belongs to the Metal drill group and is optimised for steel and similar hard materials. Are you unsure whether this tool meets your requirements or need additional technical data? No problem – METAV Werkzeuge offers comprehensive, competent advice. 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271
4.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Die Kombination aus HSS-G-Schliff, kurzer Ausführung und 135° Spitzenwinkel sorgt für präzise, stabile Bohrungen in Stahl und Gusswerkstoffen; für Beratung und Lieferung steht Metav direkt aus Emmerich zur Verfügung. Spiralbohrer 4,7 mm (HSS-G) – MetavCUT Profi Line Der Spiralbohrer 4,7 mm in kurzer Ausführung eignet sich für präzise Metallbohrungen an stationären und handgeführten Maschinen und erfüllt die Anforderungen der DIN 338. Kurze Ausführung für höhere Stabilität Geschliffener HSS-G für saubere Bohrbilder 135° Spitzenwinkel für harte Werkstoffe Zylinderschaft, geeignet für Handbohrmaschine Normkonform nach DIN 338 Mehr Stabilität bei präzisen Metallbohrungen Dank der kurzen Auskraglänge reduziert dieser Bohrer die Neigung zum Verbiegen und erhöht die Rundlaufgenauigkeit. Die geschliffene Geometrie (HSS-G) erzeugt scharfe Schneiden und saubere Spanabfuhr, was deutlich präzisere Bohrlöcher zur Folge hat. Diese Eigenschaft ist besonders vorteilhaft beim Bohren in legierten und unlegierten Stahl sowie Gusseisen, da weniger Nacharbeit erforderlich wird und die Werkzeugstandzeit steigt. Schnelleres Bohren mit geringer Anpresskraft Die geschliffene Ausführung ermöglicht ein bis zu 40 % schnelleres Eindringen bei etwa 50 % geringerer Anpresskraft im Vergleich zu herkömmlichen HSS-Varianten. In Kombination mit dem 135° Spitzenwinkel verkürzt sich die Anbohrzeit bei harten Werkstoffen, ohne die Bohrbildqualität zu opfern. Das Ergebnis sind effizientere Arbeitsabläufe und weniger Werkzeugwechsel in der Werkstatt. Einsatzbereiche und Anwendernutzen Konzipiert für Werkstatt, Montage und industrielle Anwendungen, ist dieser Spiralbohrer besonders geeignet für dünne bis mittlere Bleche, Profile sowie für allgemeine Metallbearbeitung mit Handbohrmaschine oder stationärer Maschine. Die kurze Ausführung macht ihn ideal für präzisionsorientierte Arbeiten, bei denen Stabilität und Maßhaltigkeit entscheiden. Anwender profitieren von konsistenten Ergebnissen und niedrigerem Ausschuss. Empfehlung: Für präzise Metallbearbeitung empfiehlt Metav den Einsatz des MetavCUT Profi Line Spiralbohrers mit HSS-G-Schliff; bei Fragen oder zur Bestellung nutzen Sie bitte die Beratung per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 48047-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Profi Line Fakten Durchmesser: 4,7 mm Gesamtlänge: 86 mm Spiralänge: 47 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Stück Besonderheiten Material: HSS-G Schaftausführung: geschliffen Norm: DIN 338 Ausführung: kurz Typ: Typ N Für Bohrmaschine: Handbohrmaschine Farbe: blank FAQ Für welche Materialien ist dieser Bohrer geeignet? Der MetavCUT Profi Line Spiralbohrer mit HSS-G ist ausgelegt für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff; die Kombination aus kurzem Schaft und 135° Spitzenwinkel macht ihn besonders effektiv bei harten Werkstoffen. Kann der Spiralbohrer in einer Handbohrmaschine verwendet werden? Ja, die kurze Ausführung und der Zylinderschaft erlauben den Einsatz an einer Handbohrmaschine; für sehr präzise Passungen ist jedoch eine stationäre Maschine ratsam. SKU 48047-FDA ist speziell für praxisnahe Werkstattanwendungen konzipiert. Was bedeutet geschliffen (HSS-G) im Vergleich zu gewalzten Bohrern? Geschliffene Bohrer (HSS-G) bieten sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, was zu saubereren Bohrlöchern führt; sie sind jedoch empfindlicher gegenüber Krafteinleitungen und sollten bevorzugt mit Kühlung und an stationären Maschinen eingesetzt werden. Welchen Vorteil bringt der 135° Spitzenwinkel? Der 135° Spitzenwinkel reduziert die Anbohrzeit und verringert das Ausbrechen bei der Materialoberfläche, sodass insbesondere bei Edelstahl und gehärteten Stählen ein stabilerer Arbeitsprozess erzielt wird. Wie viele Bohrer sind in einer Verpackungseinheit enthalten? Die Verpackungseinheit des MetavCUT Profi Line Spiralbohrers (Artikelnummer 48047-FDA) beträgt 10 Stück.
4.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
MetavCUT Profi Line Twist Drill 4.8 mm — Short HSS‑G, 135° (Type N, DIN 338, Bright Finished) The MetavCUT Profi Line Twist Drill is a short Type N twist drill engineered for precise metal drilling, featuring a 4.8 mm diameter and a 135° point angle for demanding steel and cast applications. Short design for improved stability and precision HSS‑G ground for sharpness and clean holes 135° point angle for harder materials like steel Fully ground shank for excellent concentricity Conforms to DIN 338 for standardized quality Precision and Stability for Demanding Metalwork Shorter overall length reduces overhang and therefore deflection, delivering greater positional accuracy during drilling. The short design of this twist drill, combined with a fully ground shank, results in improved stability when used in handheld or machine setups. For precision holes in metal, this geometry minimizes wander and helps achieve consistent diameters even under tougher cutting conditions. Faster Drilling with Less Feed Force Thanks to the HSS‑G (ground High Speed Steel) geometry, chip evacuation and cutting action are optimised, which can translate into up to 40% faster drilling and about 50% less required feed force compared to conventional HSS tools. The ground flute profile creates sharp cutting edges that require lower thrust, so less operator effort is needed and cycle times shorten when working in alloyed or unalloyed steel. Optimised for Metal: Applications and Machine Compatibility This Type N twist drill is primarily intended for machining Metal, including Steel, Cast Steel, Cast Iron, Sintered Iron, Non‑Ferrous Metals and Hard Plastics. It is suitable for use in Drilling Machines as well as robust Hand Drilling Machines when stability is ensured. The combination of a 135° point angle and the normal spiral flute makes it well suited to harder workpiece materials but less ideal for very soft timbers where a dedicated wood drill would guide better. DIN 338 and Ground Geometry — What That Means for Quality Manufactured to DIN 338, the tool adheres to the standard for short twist drills with cylindrical shank. The ground flute production method yields very sharp edges and high runout accuracy, producing cleaner holes and improved concentricity. Note that ground HSS drills can be more brittle than rolled variants; for extended tool life use proper coolant and avoid abrupt lateral loads. For precise, efficient metal drilling choose the MetavCUT Profi Line Twist Drill — for expert advice and application support contact METAV Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 48048-FDA Diameter: 4.8 mm Point Angle: 135° Type: Type N Execution: short Spiral Length: 47 mm Overall Length: 86 mm Finish/Color: bright finished Shank Execution: fully ground Material: HSS-G Application: Drills for metal For Drilling Machine: Drilling Machine Model Series: Profi Line Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Profi Line Twist Drill best used for? The MetavCUT Profi Line Twist Drill (Type N) is mainly used for drilling high‑strength materials and larger metal diameters; its short, ground geometry makes it especially suitable for precise metalworking in steels and cast materials. Which three drill types are commonly distinguished? Typical drill categories are Metal Drills, Wood Drills and Stone/Concrete Drills, and the MetavCUT Profi Line Twist Drill belongs to the Metal Drills group designed for machining metallic materials.
4.8mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill — Type N short HSS‑G, 4.8 mm, 135°, TIN‑coated The Twist Drill Type N short bit is a precision metal‑working drill for Drilling Machines, designed for stable, fast holes in alloyed and unalloyed steels and other non‑ferrous metals. Short geometry for higher stability and precision TIN‑coated surface for reduced wear and friction Fully ground shaft (HSS‑G) for sharp cutting and clean holes 135° tip angle optimised for hard materials like stainless steel Conforms to DIN 338 for short cylindrical shank twist drills Precision and faster machining thanks to short, ground geometry Short overall length combined with a fully ground HSS‑G flute geometry delivers significantly improved stability and a reduced tendency to deflect. Because the spiral length and overhang are smaller, the bit permits more accurate positioning and straighter holes even under higher cutting forces. The ground flute profile produces very sharp cutting edges, enabling up to 40% faster drilling and a requirement of roughly 50% less feed force compared with conventional HSS bits, which translates directly into less operator fatigue and higher productivity on the shop floor. Long tool life and lower friction with TIN coating A Titanium Nitride (TIN) coating forms a hard, wear‑resistant layer that reduces adhesion and heat build‑up at the cutting edge. When used with an appropriate coolant, the TIN‑coated surface noticeably lowers friction and abrasive wear, extending service life during serial or heavy‑duty metal drilling. This treatment is especially beneficial for machining alloyed and unalloyed steel, cast iron, copper alloys and hard plastics, where surface hardness and temperature can cause rapid tool degradation without coating. Optimised tip and spiral for hard materials and clean entry The 135° tip angle and Type N normal spiral make this bit especially suitable for harder workpiece materials such as stainless steel and temper castings. A larger tip angle reduces initial bite time and improves centring when starting a hole, while the standard spiral geometry supports efficient chip evacuation in metalworking. Conformity with DIN 338 ensures that dimensions and tolerances meet recognised standards for short cylindrical‑shank twist drills, supporting predictable performance in production environments. Built for professional users and demanding applications Manufactured as part of the Profi Line by MetavCUT, this short Twist Drill is aimed at professionals who require repeatable accuracy and durability in metal drilling operations. The bit suits stationary and portable Drilling Machines used in workshops and industrial settings. For tasks where rigidity, precise hole quality and reduced runout are priorities, the compact design and ground construction make this tool an efficient choice. Strong recommendation: For reliable, precise metal drilling choose the MetavCUT Twist Drill Type N short with TIN coating — METAV Werkzeuge offers expert technical advice and support by e‑mail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Marke: MetavCUT SKU: 41048‑FDA Diameter: 4.8 mm Tip Angle: 135° Type: Type N Execution: short Overall Length: 86 mm Spiral Length: 47 mm Material: HSS‑G Shaft Finish: fully ground Coating / Colour: TIN‑coated Application: Drills for metal / Bohrer für Metall Conformance: DIN 338 Model Series: Profi Line Intended Machine: Drilling Machine (Handbohrmaschine) Manufacturer: MetavCUT Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the main use of the MetavCUT Twist Drill Type N short? The MetavCUT Twist Drill Type N short is primarily used for machining high‑strength materials and larger diameters in metalworking. Its short form provides greater stability and precision, and the combination of HSS‑G material and TIN coating makes it durable under high loads when used with suitable cooling. Which three drill types exist and where does the MetavCUT Twist Drill fit? There are three common drill categories: metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill Type N short belongs to the metal drill group and is optimised for cutting steels, cast materials and non‑ferrous metals. Can the MetavCUT Twist Drill be used for drilling wood? A metal‑type twist drill such as the MetavCUT Twist Drill can be used in wood, but guidance and hole finish are typically inferior compared with dedicated wood drills. Metal drills are easier to resharpen and show less self‑feeding, which may be an advantage or disadvantage depending on the task. Why is the tip of a twist drill often sharpened? The tip sharpening reduces the cross‑cut at the point of the Twist Drill, which lowers friction and hence the required feed force. A sharpened tip also improves centring at drill start, resulting in cleaner, more accurate holes and less tool wander.
4.9mm HSS-G Body Drill ,double sided, black finished without margin - MetavCUT
Karosseriebohrer – Body Drill, HSS‑G, 4.9 mm, 135° tip, double‑sided, black finished, fully ground The Karosseriebohrer Body Drill is a double‑sided Twist Drill designed for precise metal drilling with a 135° tip angle, ideal for use with a Drilling Machine. Short, robust double‑ended design for stable drilling HSS‑G fully ground for fast, precise metal cuts 4.9 mm diameter with 135° tip for harder materials Black finished surface for reduced glare and corrosion resistance Drill faster into hardened metals with less effort For workshop tasks demanding reliable entry into tough materials, this Twist Drill delivers consistent performance. Its HSS‑G composition and fully ground shaft geometry provide razor‑sharp cutting edges and high concentricity, which translates to cleaner holes and reduced runout. Because the tip is ground to 135°, the drill penetrates harder alloys and stainless steels with less wandering, shortening pilot operations and improving repeatability on stamped or welded components. Designed for sustained use in metalworking environments Stability and longevity matter when working with sheets and cast parts. The double‑sided configuration acts like two drills in one: when one end becomes dull the tool can be reversed, extending service life and reducing tool change downtime. The black finished without margin coating offers modest corrosion protection and less surface reflection during machining. The fully ground geometry means CNC‑grade flute accuracy, which enhances chip evacuation and hole quality under moderate cooling. Optimised geometry for workshop machines and manual drills Compatibility with a Drilling Machine and sturdy hand drill setups is a practical advantage of this Body Drill. Its short overall length and robust design suit applications such as sheet metal, bodywork and thin‑wall assemblies where controlled, repeatable holes are required. Users benefit from easier centring and reduced feed force thanks to the point geometry, making the tool especially suitable for fastening and rivet‑preparation tasks in automotive and fabrication contexts. Who benefits and when to choose this drill Choose this tool when working with alloyed or unalloyed steel, cast materials or hard plastics where precision and edge quality are critical. Professionals in fabrication, maintenance and vehicle body repair will find the balance of speed and control useful for repetitive, high‑quality drilling. For occasional amateur use, the reversible tip offers economical value by prolonging usable life between resharpening cycles. For tailored advice on whether the MetavCUT Karosseriebohrer Body Drill fits your application, or to get further technical data, contact METAV Werkzeuge for competent consultation: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Designation: Karosseriebohrer / Body Drill Brand: MetavCUT SKU: 59049-FDA Diameter: 4.9 mm Tip Angle: 135° Version: double-sided Colour: black finished without margin For Use With: Drilling Machine Spiral Length: 13 mm Overall Length: 58 mm Shaft Execution: fully ground Material: HSS-G Model Series: Profi Line Application: Drills for metal Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? The MetavCUT Karosseriebohrer Body Drill is primarily applied when machining high‑strength materials and larger diameters; its form allows straightforward resharpening and it withstands significant loads, making it suitable for rivet and thin‑sheet holes common in bodywork. Why are Twist Drills pointed? The tip geometry of the MetavCUT Karosseriebohrer Body Drill reduces the cross‑cut at the point, lowering friction forces so less feed force is needed and improving centring of the tool in the workpiece. Can you use a Twist Drill to drill wood? A metal Twist Drill like the MetavCUT Karosseriebohrer Body Drill can be used in wood, but guidance is inferior and the hole finish is less clean; however these drills are easier to resharpen and show less self‑feeding than specialized wood bits. At which drilling depths is a Twist Drill most commonly used? The MetavCUT Karosseriebohrer Body Drill is typically used for through‑hole drilling in solid material; for diameters up to about 20 mm and depths up to 100 mm, the Twist Drill is the most frequent choice. Which three drill types are there? Metal drill, wood drill, and masonry/concrete drill are the three basic categories commonly distinguished. What is better, HSS or HSSE? When selecting between HSS and HSSE for tools like the MetavCUT Karosseriebohrer Body Drill, note that HSSE is not universally superior; evaluate the actual working conditions to decide if the higher cost of HSSE is justified.
4.9mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — short HSS‑G 4.9 mm, 135° (Type N), bright finished The Twist Drill short HSS‑G 4.9 mm is a precision metal‑drilling bit for drilling machines and hand drills, designed for stable, accurate holes in hard materials. Short HSS‑G design for metal drilling 135° point angle for harder materials Fully ground shank for high concentricity Conforms to DIN 338 for short twist drills Profi Line finish for precise, clean boreholes High performance for demanding metal work The Twist Drill from MetavCUT is engineered as a short HSS‑G cutting tool that achieves up to 40% faster drilling with 50% less thrust force compared with conventional HSS drills, thanks to the ground geometry. The reduced cantilever length increases stability and reduces deflection, so the bit cuts cleaner and requires less rework. This makes the tool particularly suited for precision tasks in workshops and production environments where efficiency and repeatability matter. Reliable drilling in hard and alloyed materials With a 135° point angle and Type N normal spiral, this short twist drill is optimised for stainless steel, alloyed and unalloyed steels, cast steels, sintered iron and hard plastics. The DIN 338 classification confirms the design as a short cylindrical shank drill in HSS‑G quality, where grinding creates very sharp cutting edges and high runout accuracy. For users with limited metallurgical knowledge: a larger point angle reduces initial cutting forces and improves centring when penetrating tougher surfaces. Greater control and easier handling The fully ground shank and shortened overall length give the drill superior concentricity and less vibration in both drilling machines and compatible hand drills. Where rigidity is essential, the short design minimises chatter and improves hole quality. For workshop use, this means fewer tool changes and less scrap. Note that ground HSS drills are harder but can be more brittle than rolled alternatives, so recommend controlled feed, suitable cooling and stationary clamping for maximum tool life. Designed for professionals who demand precision Part of the Profi Line, the bright finished short twist drill combines a smooth surface with precise geometry to deliver clean chips and reliable hole tolerance. The 4.9 mm diameter and 86 mm overall length balance reach and rigidity for common metalworking tasks. For those seeking expert advice on suitability for specific alloys, hole tolerances or recommended feed rates, MetavCUT tools are supported by METAV Werkzeuge with comprehensive, competent consultation and after‑sales support. Strong recommendation: Choose the MetavCUT short Twist Drill for precise, efficient metal drilling and contact METAV Werkzeuge for tailored technical advice via info@metav-werkzeuge.com or by phone +49 2822 7131930, WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 48049-FDA Diameter: 4.9 mm Point angle: 135° Type: Type N Execution: short Spiral length: 52 mm Overall length: 86 mm Shank execution: fully ground Finish/Colour: bright finished Material: HSS-G Norm: DIN 338 Application: Drills for metal For drilling machine: Drilling Machine / Hand drill Model series: Profi Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for The MetavCUT Twist Drill short HSS‑G is primarily used for drilling high‑strength materials and larger diameters in metalworking; its ground design keeps cutting edges very sharp and maintains precision under demanding loads. Which three drill types exist When classifying common drill categories, there are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill belongs to the metal drill family and is optimised for steel and other hard materials. Why are twist drills sharpened Twist drills are sharpened to reduce the cross cutting edge at the tip, which lowers friction and required feed force while improving centring; sharpening the MetavCUT Twist Drill therefore reduces heat and makes guided entry into the workpiece easier. Can a metal twist drill be used in wood A metal drill such as the MetavCUT Twist Drill can be used in wood, but it will usually give less precise guidance and a rougher finish compared with a dedicated wood drill; however, metal drills are easier to resharpen and typically have less aggressive self‑feeding.
4mm HSS-G Body Drill ,double sided, black finished without margin - MetavCUT
Karosseriebohrer »59040-FDA« von MetavCUT Karosseriebohrer »59040-FDA« ist ein geschliffener HSS-G Doppelendbohrer für präzise Blech- und Karosseriearbeiten mit 4 mm Durchmesser. Karosseriebohrer »59040-FDA« von MetavCUT HSS-G geschliffen für saubere Metallbohrungen Doppelendbohrer: beidseitig einsetzbar 4 mm Durchmesser, Spiralänge 13 mm Spitzenwinkel 135° für harte Werkstoffe Hervorragende Schneidleistung dank geschliffener HSS-G-Geometrie Der geschliffene HSS-G Werkstoff sorgt für sehr scharfe Schneiden und eine hohe Rundlaufgenauigkeit, was saubere und präzise Bohrlöcher in Stahl, Guss und Nichteisenmetallen ermöglicht. Durch den CNC-Schliff entstehen definierte Spanräume, die das Bohren erleichtern; in der Praxis führt das zu einem bis zu 40 % schnelleren Vorschub bei gleichzeitig bis zu 50 % reduzierter Anpresskraft gegenüber ungeschliffenen Varianten. Für stationäre Anwendungen und den Einsatz mit Kühlschmierstoff bietet die Geometrie die besten Ergebnisse. Vielseitiger Einsatz im Werkstattalltag und bei Karosseriearbeiten Als Doppelendbohrer konzipiert, lässt sich das Werkzeug beidseitig verwenden und verlängert so die Nutzungsdauer pro Werkzeug. Mit 4 mm Durchmesser und einer Spiralänge von 13 mm eignet sich der Bohrer besonders für Bohrungen in Blech sowie für Niet- und Dünnblechanwendungen, wie sie in der KFZ-Karosserie vorkommen. Im Segment von 2 mm bis 13 mm ist dieser Bohrertyp ideal für handgeführte Werkzeuge wie die Handbohrmaschine, solange bei hoher Präzision vorher ein Zentrierpunkt gesetzt wird. Anwendungshinweise für saubere Ergebnisse und lange Standzeit Vor dem ersten Einsatz empfiehlt sich das Anpunkten mit einem Zentrierstift, um Wandern auf der Oberfläche zu vermeiden und exakte Bohrungen zu erzielen. Bei härteren Werkstoffen zahlt sich der 135° Spitzenwinkel aus, da dieser die Anbohrzeit verkürzt und das Einlaufen erleichtert. Wegen der geschliffenen Ausführung ist auf kontrollierte Drehzahl und Kühlung zu achten; die Bohrer können bei falscher Handhabung spröde reagieren. Regelmäßiges Reinigen der Spannuten und sachgerechtes Lagern verlängern die Standzeit deutlich. Für wen dieser Bohrer entwickelt wurde und was er bringt Der Bohrer richtet sich an Karosserie- und Blechbearbeiter, Mechaniker sowie anspruchsvolle Heimwerker, die saubere, wiederholbare Ergebnisse verlangen. Die Kombination aus geschliffener HSS-G-Geometrie und Doppelend-Ausführung bietet sowohl Wirtschaftlichkeit als auch Leistungsfähigkeit in Werkstätten und bei mobilen Einsätzen. MetavCUT liefert mit der Profi Line ein Werkzeug, das Robustheit und Präzision verbindet und sich besonders in wiederkehrenden Montage- und Reparaturaufgaben bewährt. MetavCUT empfiehlt den geschliffenen HSS-G Karosseriebohrer 59040-FDA für präzise Karosserie- und Blecharbeiten; bei Fragen zur Anwendung oder Lieferung erreichen Sie uns per eMail: info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 59040-FDA Hersteller: MetavCUT Bezeichnung: Karosseriebohrer Serie: Profi Line Fakten Durchmesser: 4 mm Gesamtlänge: 55 mm Spiralänge: 13 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (geschliffen) Ausführung: doppelseitig Schaftausführung: geschliffen Farbe: schwarz ohne Fase Für Bohrmaschine: Handbohrmaschine Modellserie: Profi Line FAQ Für welche Materialien ist der Bohrer geeignet? Der Karosseriebohrer von MetavCUT eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss sowie Nichteisenmetalle und Hartkunststoffe; die geschliffene Geometrie der Profi Line sorgt für saubere Bohrbilder auch in härteren Werkstoffen. Kann der Bohrer mit einer Handbohrmaschine verwendet werden? Ja, die Ausführung mit 4 mm Durchmesser und geschliffenem Schaft ist für den Einsatz in Handbohrmaschinen geeignet; für hochpräzise Bohrungen empfiehlt sich das Anpunkten mit einem Zentrierstift, wie es für Bohrer im Standard-Bereich empfohlen wird. Wie tief kann mit diesem Bohrer gebohrt werden? Die nutzbare Spiralänge von 13 mm begrenzt die sinnvolle Bohrtiefe; die Gesamtlänge von 55 mm erlaubt zudem die Handhabung und das sichere Einspannen, ohne die Einsatzlänge zu überschreiten. Was bedeutet 'geschliffen' und 'HSS-G' in der Praxis? Geschliffen bedeutet, dass die Schneiden und Spannuten per CNC-Schliff geformt wurden, was zu schärferen Kanten, besserem Rundlauf und präziseren Bohrlöchern führt; HSS-G steht für High-Speed-Stahl geschliffen und bringt dadurch höhere Schnittgeschwindigkeit, allerdings ist bei unsachgemäßer Anwendung auf mögliche Sprödigkeit und Kühlung zu achten. Worauf ist beim Bohren in Karosserieblech besonders zu achten? Bei dünnen Blechen empfiehlt sich geringerer Vorschub und schnelles Drehen, ein Zentrierpunkt schützt vor Wandern, und die doppelseitige Bauweise ermöglicht ein schnelles Umdrehen, wenn eine Seite stumpf wird, wodurch Stillstandzeiten reduziert werden.
4mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Kompakte Kombination aus Stabilität und Präzision: Der kurze, geschliffene HSS-G Spiralbohrer mit 135° Spitzenwinkel ermöglicht bis zu 40 % schnelleres Bohren bei gleichzeitig 50 % geringerer Anpresskraft und eignet sich besonders für legierte und unlegierte Stähle. Für stationäre Maschinen und handgeführte Bohrmaschinen geeignet. Bestellen Sie den MetavCUT Spiralbohrer direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer 4 mm HSS-G, kurze Ausführung, Profi Line Der Spiralbohrer 4 mm HSS-G in kurzer Ausführung bietet hohe Stabilität und präzise Bohrungen in Metall bei stationären und handgeführten Anwendungen. Kurze Ausführung für höhere Stabilität Geschliffene HSS-G-Geometrie für präzise Bohrungen 135° Spitzenwinkel für harte Werkstoffe Geeignet für Handbohrmaschine und stationäre Maschinen DIN 338 Klassifikation, Profi Line Höhere Standfestigkeit durch kurze Auskraglänge Die kurze Bauform reduziert die Auskraglänge und minimiert somit Verformung und Vibrationen beim Bohren. Dadurch entsteht eine spürbar höhere Stabilität, die insbesondere bei harten Werkstoffen wie legiertem Stahl oder Gusseisen saubere Bohrbilder und längere Werkzeugstandzeiten ermöglicht. Für Anwender heißt das: gleichmäßigere Bohrungsqualität und weniger Ausschuss bei Serien- oder Einzelteilen. Schnelleres und effizienteres Bohren dank geschliffener Geometrie Die geschliffene HSS-G-Geometrie sorgt für sehr scharfe Schneiden und hohe Rundlaufgenauigkeit. In der Praxis führt das zu bis zu 40 % schnellerem Bohren und reduziertem Kraftaufwand, wodurch die Belastung für Maschine und Bediener sinkt. Für weniger erfahrene Anwender ist dies ein Vorteil, weil das Bohren kontrollierter gelingt und das Risiko von Anlaufrissen am Bohranfang reduziert wird. Spezifische Eignung für Metall und Anwendungsbereiche Der Spiralbohrer wurde speziell für die Bearbeitung von Stahl, legiertem Stahl, Gusseisen, Temperguss, Nichteisenmetallen und harten Kunststoffen entwickelt. Als Typ N mit Normalspirale überzeugt er im Standard-Bereich (2–13 mm) und ist für alltägliche Werkstattaufgaben sowie präzise Montagearbeiten gut geeignet. Wer häufig in Metall bohrt, profitiert von der ausgewogenen Kombination aus Standzeit und Zerspanleistung. Praktische Hinweise zur Anwendung und Maschinenwahl Bei handgeführten Bohrmaschinen empfiehlt sich das Anpicken oder Zentrieren vor dem Bohren, um ein Wandern des Bohrers zu vermeiden. Stationäre Maschinen erlauben höhere Präzision und schonen das Werkzeug. Zur Kühlung und Späneabfuhr ist bei langen Serienläufen die Nutzung von Kühlschmierstoff oder geeigneter Späneabfuhr sinnvoll, damit die Lebensdauer des Werkzeugs erhalten bleibt. Vorteile der DIN-338-Norm und geschliffener Ausführung erklärt Die Einordnung nach DIN 338 garantiert standardisierte Abmessungen und Austauschbarkeit. Geschliffen bedeutet, dass die Spirallage präzise per CNC geschliffen wurde, was besonders scharfe Kanten und saubere Bohrungen liefert. Diese Ausführung ist besonders dann vorteilhaft, wenn hohe Maßhaltigkeit und Oberflächenqualität gefordert sind. Empfehlung: Für präzise Metallbearbeitung den MetavCUT Spiralbohrer mit geschliffener HSS-G-Geometrie wählen und Verfügbarkeit direkt bei Metav prüfen: info@metav-werkzeuge.com · Tel. +49 2822 7131930 · WhatsApp +49 170 2837271 Produktmerkmale Artikelnummer: 48040-FDA Marke: MetavCUT Serie: Profi Line Bezeichnung: Spiralbohrer Fakten Durchmesser: 4 mm Gesamtlänge: 75 mm Spirallänge: 43 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Schaftausführung: geschliffen (voll geschliffen für hohe Rundlaufgenauigkeit) Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) Ausführung: kurz (reduzierte Auskraglänge, höhere Stabilität) Typ: Typ N (Normalspirale, geeignet für Metallbearbeitung) Oberfläche: blank (bright finished) Für Bohrmaschine: Handbohrmaschine FAQ Ist der Spiralbohrer für Edelstahl geeignet? Der MetavCUT Spiralbohrer 4 mm HSS-G mit 135° Spitzenwinkel eignet sich für viele harte Werkstoffe; bei besonders zähem Edelstahl sind angepasste Schnittwerte und Kühlung empfehlenswert, um Standzeit zu maximieren. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, der kurze Spiralbohrer wurde für den Einsatz in Handbohrmaschinen und stationären Maschinen konzipiert; durch die kurze Ausführung erhöht sich die Stabilität beim handgeführten Bohren. Was bedeutet HSS-G geschliffen und welchen Vorteil bringt das? HSS-G steht für geschliffenen Schnellarbeitsstahl; diese Fertigungsart liefert sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, was zu präziseren Bohrlöchern und häufig besseren Oberflächen führt. Wie beeinflusst der 135° Spitzenwinkel die Bohrung? Der größere Spitzenwinkel reduziert die Anbohrbelastung in harten Werkstoffen, verbessert die Zentrierung und verringert das Risiko von Ausrissen; daher ist er für legierte Stähle und Gussmaterialien empfehlenswert. Ist der Bohrer nach DIN 338 gefertigt und was heißt das praktisch? Ja, die Ausführung entspricht DIN 338; das garantiert standardisierte Abmessungen, Austauschbarkeit und eine klare Einordnung der kurzen Spiralbohrer mit Zylinderschaft.
4mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Kombinieren Sie die höhere Stabilität der kurzen Ausführung mit der Abriebfestigkeit der TIN-beschichteten Oberfläche und dem präzisen geschliffenen HSS-G für saubere Metallbohrungen; bestellen Sie das Werkzeug direkt über Metav oder lassen Sie sich bei technischen Fragen von unserer Beratung unterstützen. Spiralbohrer von MetavCUT (HSS-G, kurz) Der Spiralbohrer in kurzer Ausführung ist ein spezialisierter Metallbohrer für präzise Bohrungen in legierten und unlegierten Stählen, Gusseisen und Nichteisenmetallen. Kurze Ausführung für hohe Stabilität TIN-beschichtet reduziert Reibung und Verschleiß Geschliffenes HSS-G für saubere Bohrbilder Spitzenwinkel 135° für härtere Werkstoffe Passend für Handbohrmaschine mit Zylinderschaft Robuste Materialwahl für langlebige Metallbohrungen Dank der Kombination aus HSS-G und TIN-beschichtet ist dieses Werkzeug auf hohe Beanspruchung bei Metall-Bearbeitung ausgelegt. HSS-G steht für geschliffenen Schnellarbeitsstahl, der sehr scharfe Schneiden und exakten Rundlauf liefert; das Ergebnis sind saubere Bohrlöcher mit geringer Gratbildung. Die Titan-Nitrid-Beschichtung verringert Reibung und Oberflächenhitze, was die Standzeit erhöht und den Werkzeugwechsel reduziert. Präzision und Stabilität bei handgeführten Arbeiten Für den Einsatz im Standard-Bereich (2–13 mm) ist die kurze Auskraglänge ein klarer Vorteil: Weniger Ausschlag und geringere Neigung zum Verbiegen sorgen für höhere Bohrgenauigkeit bei Handbohrmaschinen und stationären Säulenbohrern. Bei besonders hohen Genauigkeitsanforderungen empfiehlt sich ein Anpünktchen oder Zentrierbohrer vor dem Direktschnitt, um das „Wandern“ des Bohrers zu minimieren. Effiziente Leistung durch geschliffene Geometrie Durch den CNC-Schliff reduziert sich die Anpresskraft erheblich; Anwender profitieren von einem bis zu 40 % schnelleren Bohren und deutlich geringerem Kraftaufwand im Vergleich zu herkömmlichen HSS-Werkzeugen. Die geschliffene Spirale ermöglicht zudem bessere Späneführung bei moderaten Schnittparametern, wodurch das Risiko von Bruch oder Einlaufen bei dieser kurzen Ausführung sinkt. Einsatzspektrum und Anwendungsempfehlung Dieses Präzisionswerkzeug eignet sich für Werkstätten, Montage und anspruchsvolle Handwerksarbeiten, insbesondere dort, wo Stahl, Temperguss, Gusseisen oder Nichteisenmetalle bearbeitet werden. Als Typ N (Normalspirale) bietet es universelle Eignung für Metall; bei Dauerbetrieb oder harten Werkstoffen wird eine Kühlung empfohlen, um die Lebensdauer weiter zu erhöhen. Setzen Sie auf die Profi Line von MetavCUT und fordern Sie ein individuelles Angebot über Metav an – E‑Mail: info@metav-werkzeuge.com Produktmerkmale Bezeichnung: Spiralbohrer Artikelnummer: 41040-FDA Hersteller: MetavCUT Serie: Profi Line Norm: DIN 338 (kurze Spiralbohrer) Fakten Durchmesser: 4 mm Gesamtlänge: 75 mm Spirallänge: 43 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (geschliffen) Schaftausführung: geschliffen Beschichtung: TIN-beschichtet (Titan-Nitrid) Typ: Typ N (Normalspirale) Für: Handbohrmaschine FAQ Für welche Materialien ist dieses Werkzeug geeignet? Der Spiralbohrer von MetavCUT Profi Line eignet sich für legierten und unlegierten Stahl, Gusseisen, Temperguss sowie Nichteisenmetalle; die TIN-beschichtete Oberfläche trägt zur erhöhten Standzeit bei. Kann der Bohrer in einer Handbohrmaschine eingesetzt werden? Ja, der kurze Aufbau und die Zylinderschaft machen den Spiralbohrer von MetavCUT ideal für Handbohrmaschine; bei feinen Passungen empfiehlt sich vorheriges Anpünktchen. Was bewirkt der Spitzenwinkel von 135°? Der Spitzenwinkel von 135° erhöht die Standzeit und erleichtert das Anbohren harter Werkstoffe; der Spiralbohrer 41040-FDA dringt damit kontrollierter in Edelstahlähnliche Materialien ein. Warum ist geschliffenes HSS (HSS-G) vorteilhaft? Geschliffenes HSS bietet sehr scharfe Kanten und hohe Rundlaufgenauigkeit, wodurch der Spiralbohrer schneller schneidet und sauberere Bohrbilder erzeugt; die Baureihe Profi Line ist darauf ausgelegt, Präzision zu liefern. Welche Vorteile bringt die TIN-Beschichtung konkret? Die Titan-Nitrid-Beschichtung reduziert Reibung und thermische Belastung; dadurch arbeitet der Spiralbohrer von MetavCUT länger zuverlässig und weist geringeren Verschleiß auf.
5.1mm HSS-G Body Drill ,double sided, black finished without margin - MetavCUT
Body Drill – Double‑Ended Twist Drill, HSS‑G, 5.1 mm, 135° (black finished without margin) by MetavCUT The Body Drill is a double‑ended Twist Drill for Drilling Machines, designed for precise metalworking and thin‑sheet applications with a 5.1 mm diameter and a 135° tip angle. Double‑ended design for immediate reversal use HSS‑G fully ground for fast, clean holes 135° tip angle for harder materials such as stainless steel Fully ground shank for high concentricity and precision Faster, more precise drilling in demanding metalwork The HSS‑G construction and fully ground geometry deliver a noticeable performance advantage when working with steels and non‑ferrous metals. Because the flute geometry is produced by CNC grinding rather than rolling, the result is sharper cutting edges and high roundness, which reduces chatter and produces cleaner holes. For users who need fast cycle times, this design can enable up to around 40% faster drilling while requiring less manual feed force, improving workflow on both portable and bench drilling machines. Reliable performance for specific industrial applications Engineered as a double‑ended Twist Drill, this tool is particularly suited to Body and Sheet Metal tasks where short, robust drills are preferred. The 135° tip angle was chosen to improve centring and reduce walking in tougher alloys, making the bit appropriate for alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Iron, Non‑Ferrous Metals and Hardened Plastics. This focused suitability helps professionals match tool selection to material, resulting in fewer rejects and rework in production settings. Designed for ease of use and longevity in workshop environments A fully ground shank improves concentricity in chucks and reduces vibration, which benefits both hole quality and tool life. The double‑ended (two‑point) configuration means when one tip dulls or chips, the drill can simply be reversed to use the second cutting end, effectively offering two usable tips in one component. This reduces downtime for replacements and simplifies inventory for technicians handling rivet and rivet‑hole preparation in vehicle bodywork. Who benefits from this drill The tool is aimed at professional users and serious hobbyists working in metal fabrication, automotive body repair and industrial maintenance. Its specification — 5.1 mm diameter, 62 mm total length, and 16 mm spiral length — makes it a practical choice where precision holes in sheet or thin plate are required; the robust HSS‑G construction supports repeated use under intermittent cooling and typical workshop conditions. Strong recommendation: For reliable results in demanding metal drilling tasks, choose MetavCUT’s Body Drill (Twist Drill) with HSS‑G ground geometry; for further specification advice or to confirm fit for a particular machine, contact METAV Werkzeuge’s expert support at info@metav-werkzeuge.com or call +49 2822 7131930 — WhatsApp: +49 170 2837271 Body Drill Brand: MetavCUT SKU: 59051-FDA Type / Execution: double sided / doppelseitig Material: HSS‑G Diameter: 5.1 mm Tip Angle: 135° Spiral Length: 16 mm Total Length: 62 mm Shank Finish: fully ground / geschliffen Colour: black finished without margin / schwarz ohne Fase Application: Drills for metal / Bohrer für Metall For Use With: Drilling Machine / Handbohrmaschine Model Series: Profi Line Packaging Unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and how does the MetavCUT Body Drill perform in this role? The Twist Drill, in the form of the MetavCUT Body Drill, is mainly applied to machining high‑strength materials and larger drill diameters where stability is required. The double‑ended HSS‑G design is easy to sharpen and withstands greater loads, providing cleaner holes in metals and reducing the need for frequent replacements. Which three drill types exist and how does the MetavCUT Body Drill compare? The three common drill types are metal drills, wood drills and stone/concrete drills. The MetavCUT Body Drill is a metal drill (Twist Drill) optimised for metalworking; it differs from wood and masonry bits in geometry and material, offering better edge retention and precision for metal applications. Why are Twist Drills sharpened and what benefit does this give the MetavCUT Body Drill? Sharpening reduces the cross‑cut at the tip, lowering friction and thus the required feed force; it also improves centring. For the MetavCUT Body Drill, appropriate sharpening and the 135° tip help reduce walking and improve hole quality in harder materials. Can a metal Twist Drill be used for wood and what to expect with the MetavCUT Body Drill? A metal (HSS‑G) Twist Drill like the MetavCUT Body Drill can be used in wood, but guidance and finish will be inferior compared to dedicated wood bits. Metal drills are easier to re‑sharpen and have less self‑feed; expect a less clean hole and more need for careful guidance when using it in timber.
5.1mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short HSS‑G Twist Drill, Ø 5.1 mm, 135° Tip, Type N, Bright Finished, Short Version, DIN 338, MetavCUT The Twist Drill short Type N is a precision HSS‑G metalworking drill designed for stable, accurate holes in hard and alloyed steels, ideal for use with drilling machines and hand drills. Short design for increased rigidity HSS‑G ground for sharp cutting edges 135° tip for hard metals and stainless steel Suited for Drilling Machine and hand drills Conforms to DIN 338 for short twist drills Short design and material for higher drilling efficiency The Twist Drill from MetavCUT features a short overall length and a reduced exposed flute length, which significantly increases Stability during machining and reduces the tendency to deflect. Made from HSS‑G (ground high speed steel), the tool delivers very sharp cutting edges and excellent concentricity. The grinding process produces a clean geometry that allows more efficient chip removal and a longer useful life under correct operating conditions. For customers who need a reliable solution for demanding metal applications, this combination of short design and ground HSS offers clear performance advantages. Precise tip geometry for demanding materials A 135° Tip Angle makes this short Twist Drill particularly suitable for drilling hard materials such as stainless steel and tempered alloys. The flatter point reduces the tendency to wander on the surface and shortens plunge time when entering the workpiece. As a Type N (normal spiral) geometry, it represents the classic metalworking design and balances cutting action with chip evacuation. This geometry reduces feed forces compared with blunt angles and enables cleaner, more accurate holes when used with appropriate coolant and clamping. Typical applications and who benefits most This Twist Drill is intended primarily for metalworking: alloyed and unalloyed steels, cast steels, cast iron, sintered iron, non‑ferrous metals and hard plastics. Its robust short form is ideal for precision tasks on stationary and portable drilling machines where rigidity matters. Workshops, maintenance departments and precision fabricators who require repeatable hole quality in tougher materials will find this tool particularly advantageous. The ground HSS construction also allows easier regrinding and refurbishment when necessary, extending tool life under professional maintenance. Standards and manufacturing details that matter Manufactured to DIN 338, this short Twist Drill conforms to the classification and dimensional tolerances expected for short cylindrical shank HSS drills. The designation HSS‑G indicates a ground flute geometry, often referred to as HSS‑G or HSS‑Ground, which provides high surface finish and accurate runout. The drill is delivered with a fully ground shank, a bright finished appearance and a precise flute geometry that supports high concentricity in chucks and collets. For stationary machine use, the ground variant offers excellent repeatability—while noting that ground drills can be somewhat more brittle and benefit from proper cooling during heavy machining. Highly recommended: Choose MetavCUT’s precision short Twist Drill for demanding metalworking tasks — METAV Werkzeuge offers expert advice and technical support; contact METAV Werkzeuge for consultation at info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 48051-FDA Diameter: 5.1 mm Tip Angle: 135° Type: Type N Execution: short Finish: bright finished Material: HSS‑G Spiral Length: 52 mm Overall Length: 86 mm Shank Finish: fully ground Application: Drills for metal Model Series: Profi Line Standard: DIN 338 For Drilling Machine: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? The MetavCUT Twist Drill (Type N) is mainly used for machining high‑strength materials and larger drill diameters; its design is well suited to demanding metalworking tasks. The ground geometry is easy to resharpen and remains capable under higher loads, making it particularly useful when drilling steels and other tough materials. Which three drill types exist? Common drill families are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking rather than softwood or masonry applications.
5.2mm HSS-G Body Drill ,double sided, black finished without margin - MetavCUT
Robuste Konstruktion und präziser CNC-Schliff machen den Karosseriebohrer zu einem zuverlässigen Werkzeug für Metallarbeiten. Die HSS-G-Materialwahl sorgt für saubere Bohrbilder und hohe Rundlaufgenauigkeit, während die doppelseitige Ausführung Zeit spart, da beide Enden nutzbar sind. Bestellen Sie den Karosseriebohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Karosseriebohrer 59052-FDA von MetavCUT – Bohrer für Metall Der Karosseriebohrer ist ein doppelseitiger HSS-G Bohrer aus der Profi Line, entwickelt für präzise Metall- und Blechdurchdringungen mit geringem Kraftaufwand. Karosseriebohrer von MetavCUT HSS-G geschliffen für saubere Metallbohrungen Doppelseitig: zwei Einsätze in einem Werkzeug 5,2 mm Durchmesser für Standard-Metallarbeiten 135° Spitzenwinkel für leichteren Anbohrstart Geschliffene HSS-G-Geometrie für präzise Metallbohrungen Die geschliffene HSS-G-Geometrie gewährleistet sehr scharfe Schneiden und eine hohe Rundlaufgenauigkeit, was zu sauberen, gratarmen Bohrlöchern führt. Für Anwender bedeutet das weniger Nacharbeit und gleichbleibende Passungen bei Montagearbeiten. HSS-G steht für Hochleistungs-Schnellstahl, geschliffen, und empfiehlt sich besonders bei legierten und unlegierten Stählen sowie Gusswerkstoffen. Zur sicheren Anwendung wird bei harten Werkstoffen Kühlung empfohlen, um Standzeit und Schneidkante zu erhalten. Doppelseitige Bauart spart Zeit und reduziert Materialaufwand Durch die doppelseitige Ausführung lässt sich der Bohrer nach Verschleiß einer Seite einfach wenden, was Ausfallzeiten reduziert und den Verbrauch senkt. Besonders in der Karosserie- und Blechbearbeitung ist dieses Prinzip wirtschaftlich: kurze, stabile Bauform und beidseitige Nutzbarkeit entsprechen dem Bedarf bei Niet- und Dünnblecharbeiten. Anwender profitieren von der kompakten Handhabung und der Möglichkeit, Ersatzbedarf zu minimieren. Einsatzprofil: ideal für Handbohrmaschine und Blecharbeiten Mit einem Durchmesser von 5,2 mm ordnet sich der Bohrer in den Standard-Bereich ein und eignet sich für Werkstatt-, Montage- und DIY-Anwendungen. Empfohlen ist der Einsatz in Handbohrmaschinen für dünne bis mittlere Bleche, Profile und Flachstahl. Für präzise Ergebnisse vorbohren oder anpunkten, um Wandern zu vermeiden; bei größerer Präzision auf stationäre Aufnahme achten. Diese Vorgehensweise verlängert die Standzeit und verbessert die Bohrqualität. Maße, Handling und Materialhinweise für sichere Resultate Die Abmessungen von Gesamtlänge 62 mm und Spirallänge 16 mm machen den Bohrer handlich und für beengte Arbeitsbereiche geeignet. Der geschliffene Schaft gewährleistet exakten Rundlauf in Spannzangen. Der 135° Spitzenwinkel reduziert das Anbohrmoment bei harten Werkstoffen, sollte aber mit geeigneter Vorschub- und Kühlstrategie kombiniert werden, da geschliffene Bohrer bei unsachgemäßer Anwendung spröder reagieren können. Der Einsatz ist vorgesehen für Stähle, Gusswerkstoffe, Nichteisenmetalle und harte Kunststoffe. Für saubere Blechverbindungen empfehlen wir den MetavCUT Karosseriebohrer aus der Profi Line; Bestellungen und technische Beratung erhalten Sie direkt bei Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 59052-FDA Marke: MetavCUT Bezeichnung: Karosseriebohrer Serie: Profi Line Daten Durchmesser: 5,2 mm Gesamtlänge: 62 mm Spirallänge: 16 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G — Hochleistungs-Schnellstahl, geschliffen Ausführung: doppelseitig Schaft Ausführung: geschliffen Farbe: schwarz ohne Fase Für Bohrmaschine: Handbohrmaschine FAQ Ist der Karosseriebohrer für Edelstahl geeignet? Der MetavCUT Karosseriebohrer 59052-FDA mit 135° Spitzenwinkel eignet sich für härtere Werkstoffe wie Edelstahl, wenn mit ausreichender Kühlung und angepasstem Vorschub gearbeitet wird; für höchste Präzision empfiehlt sich Zentrieren vor dem Bohren. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, der Karosseriebohrer von MetavCUT ist für den Einsatz in Handbohrmaschinen vorgesehen; bei dünnen Blechen sorgt Anpunkten für mehr Genauigkeit und der geschliffene Schaft reduziert Vibrationen. Was bedeutet doppelseitig in der Praxis? Doppelseitig heißt, der Karosseriebohrer hat an beiden Enden eine Schneide und kann gewendet werden, sodass bei Verschleiß einer Seite die andere Seite weiterverwendet werden kann, was die Wirtschaftlichkeit erhöht. Wie viele Stück sind in einer Verpackungseinheit? Die Verpackungseinheit für den MetavCUT Karosseriebohrer 59052-FDA beträgt 10 Stück, ideal für Werkstätten mit regelmäßigem Verbrauch. Warum HSS-G wählen und was ist der Vorteil? HSS-G steht für geschliffenen Hochleistungs-Schnellstahl; der Vorteil liegt in sehr scharfen Kanten und hoher Rundlaufgenauigkeit, wodurch der MetavCUT Karosseriebohrer präzise und saubere Bohrungen in Metall ermöglicht.
5.2mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Type N) — 5.2 mm, 135°, short, HSS‑G, Bright Finished — MetavCUT Profi Line The Twist Drill (Type N) is a short HSS‑G metal drill designed for precise drilling on Drilling Machines and workshop applications. Short design for increased stability HSS‑G ground for clean metal holes 135° tip for hard materials like stainless steel Fully ground shank for high concentricity Conforms to DIN 338 for short twist drills Faster, more stable drilling for demanding metalwork The short design of this Twist Drill reduces overhang and significantly improves stability during cutting, which leads to more accurate, round holes and less tool wobble. For professionals who require repeatable results, the reduced tendency to bend translates into fewer reworks and a steadier feed. This benefit is especially relevant when working on harder metals where precision is critical. Ground HSS geometry and 135° tip for hard materials Manufactured from HSS‑G and produced with CNC grinding, the flute geometry and cutting edges deliver sharpness and excellent runout accuracy. The 135° tip angle shortens the dwell time on contact and improves centring in tough materials such as stainless steel and tempered alloys. Ground twist drills are easier to re‑sharpen and provide clean chip evacuation, while the Type N normal spiral ensures reliable performance in metal. Built for metal applications and professional workshops This short twist drill is tailored for drilling metal on both stationary and portable Drilling Machines and excels when used on steel, cast iron, non‑ferrous metals and hard plastics. The fully ground shank supports precise clamping and concentricity in the chuck, making it suitable for production runs and sensitive setups. As part of the Profi Line by MetavCUT, the tool targets skilled tradespeople and industrial users who prioritise repeatability and tool life. Efficiency gains and handling recommendations Thanks to the optimised geometry, this short HSS‑G drill can achieve up to 40% faster drilling and requires about 50% less thrust compared with conventional HSS tools under comparable conditions, making operations quicker and less physically demanding. For best results and longer tool life, use appropriate cooling or cutting fluid and avoid excessive overhang. The drill conforms to DIN 338, the standard for short twist drills with cylindrical shanks. Strong recommendation: Choose the MetavCUT Profi Line short Twist Drill for precision metal drilling and consult METAV Werkzeuge for technical advice — they provide expert support and comprehensive guidance to ensure the tool matches your exact needs. Are you unsure whether this Twist Drill meets your requirements or do you need additional technical data? METAV Werkzeuge offers competent consultation: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48052-FDA Diameter: 5.2 mm Overall Length: 86 mm Spiral Length: 52 mm Point Angle: 135° Type: Type N Execution: Short Shank Execution: Fully ground Material: HSS‑G Surface/Colour: Bright finished Application: Drills for metal Standard: DIN 338 Model Series: Profi Line Suitable For: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the main use of a Twist Drill? A Twist Drill from MetavCUT (Type N) is primarily used for machining high‑strength materials and larger drill diameters. The geometry and construction make it suitable for drilling into alloyed and unalloyed steel, cast steel, cast iron, sintered iron, tempered castings, non‑ferrous metals and hard plastics. Its ground design offers sharp edges and precise bore quality while withstanding higher loads. Which three drill types exist? Commonly distinguished drill categories are metal drills, wood drills and masonry/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for those applications. Why are twist drills sharpened at the tip? Sharpening the tip reduces the cross‑cutting edge and lowers friction at the point, which decreases the required thrust force. A correctly ground tip also centres the drill better in the workpiece and improves drilling accuracy. Can a metal drill be used for wood? A metal drill, such as the MetavCUT Twist Drill (Type N), can be used in wood but will typically provide less guidance and a rougher finish than specialised wood drills. Metal drills are easier to re‑sharpen and have less self‑feeding action compared with dedicated wood drills, so results may vary depending on the application and required quality.
5.2mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill — Short HSS‑G Type N, 5.2 mm, 135° (TIN‑coated) The Twist Drill Type N is a short, fully ground HSS‑G drill designed for precision metalworking with drilling machines, offering high stability and wear resistance. Short design for increased stability TIN‑coated for extended tool life Fully ground HSS‑G for fast, clean holes 135° point angle for hard metals and stainless steel Conforms to DIN 338 for consistent quality Faster, more efficient metalworking with reduced effort The short geometry of this tool increases stability and reduces deflection during drilling, which translates directly into more accurate holes and less rework. The fully ground HSS‑G geometry enables drilling up to 40% faster while requiring roughly 50% less feed force compared with conventional HSS drills, so operators benefit from higher throughput and lower physical strain. These performance gains are particularly relevant in production environments where consistency and speed matter. Coating and material that extend tool life under load A TIN‑coating (Titanium Nitride) provides a hard, low‑friction surface that reduces wear and lowers heat generation when used with appropriate cooling. Combined with the HSS‑G substrate, this finishing is especially suitable for alloyed and unalloyed steel, cast and sintered irons, copper, bronze, nickel silver and hard plastics. The coating helps to preserve cutting edges and extends service life under demanding conditions, provided a coolant system is used to further minimise friction and thermal stress. Geometry and standardisation for reliable results The Type N normal spiral and a 135° point angle make this drill optimised for harder materials such as stainless steel, where a flatter tip reduces walking and shortens plunge time. Being produced to DIN 338 for short twist drills ensures repeatable dimensions and quality across batches. The term “fully ground” means that the flute geometry is ground rather than rolled, giving sharper cutting edges and higher concentricity; this improves hole quality but requires careful handling since ground drills can be more brittle than rolled equivalents. Ideal applications and user guidance for best outcomes Designed for use in drilling machines, this short Twist Drill is best applied where precision and rigidity are required, such as toolrooms, small‑batch production and maintenance work on metal components. Use steady clamping, moderate spindle speeds and an appropriate coolant to maximise life and hole quality. Because ground HSS drills can be more prone to fracture under shock loads, stationary or well‑supported setups are recommended for the most consistent results. We recommend the MetavCUT short Twist Drill Type N for precision metalworking; for expert technical advice and to verify suitability for your applications contact METAV Werkzeuge — eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Bezeichnung: Twist Drill Marke: MetavCUT SKU: 41052-FDA Durchmesser: 5.2 mm Spitzenwinkel: 135° Typ: Type N Ausführung: short Farbe: TIN-coated Material: HSS-G Schaftausführung: fully ground Spirallänge: 52 mm Gesamtlänge: 86 mm Für Bohrmaschine: Drilling Machine Norm: DIN 338 Modellserie: Profi Line Anwendung: Drills for metal Verpackungseinheit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit it best? The Twist Drill from MetavCUT is primarily used for machining high‑strength materials and larger bore diameters; its short design and HSS‑G construction make it suitable for alloyed and unalloyed steel, temper castings, cast iron, sintered iron, nickel silver, copper, bronze and hard plastics. The geometry is relatively easy to re‑grind and withstands significant loads. Which three drill types exist? Typical drill categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category, optimised for metalworking tasks on both stationary and mobile rotating machines.
5.3mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill – MetavCUT Profi Line, 5.3 mm, Type N, 135°, Short, Bright Finished, HSS‑G, DIN 338 The Twist Drill from MetavCUT is a short, precision metal drill designed for Drilling Machines and characterised by a 135° Tip and HSS‑G construction for demanding metalworking applications. Short HSS‑G Twist Drill for high stability 135° Tip for hard materials like stainless steel Fully ground shank for high concentricity DIN 338 compliant short design Optimised flute length for stationary drilling Precision and Stability for Metalworking The short design delivers significantly improved Stability and reduced deflection compared with longer drills. With a Flute Length of 52 mm and an Overall Length of 86 mm, this short Twist Drill is engineered for applications where rigidity and accurate hole position matter. The reduced overhang minimises vibration on stationary or bench drills, enabling cleaner holes in Alloyed and unalloyed Steel as well as in Gusseisen and non‑ferrous metals. Faster, Cleaner Drilling with Ground HSS Equipped with HSS‑G (ground High Speed Steel) geometry, the drill achieves sharper cutting edges and excellent runout accuracy. Ground drills are ideal when Precision and surface quality are required; they allow up to 40% faster drilling and need less axial force compared to conventional HSS drills. Note: Ground tools can be more brittle than rolled variants and benefit from proper coolant and stationary machine setups. Geometry Optimised for Hard Materials A 135° Tip Angle reduces initial bite and improves centring when working with harder materials such as stainless steel. The Type N (normal spiral) flute design is the classic choice for metal drilling, combining reliable chip evacuation with robust cutting action. For users unfamiliar with the terms: a larger tip angle makes the drill enter the workpiece more gently and helps to avoid chatter when penetrating tough metals. Who Benefits from This Drill Manufactured for professionals and workshops, the Profi Line MetavCUT short twist drill suits machinists who need reproducible, high‑quality holes in demanding materials. It is particularly recommended for precision operations on bench and pillar Drilling Machines where rigidity and concentricity directly impact component fit and finishing operations. Practical Notes on Use The Fully Ground shank ensures excellent concentricity in chucks and collets, improving hole accuracy and surface finish. For best results in harder alloys, use adequate coolant and moderate cutting speeds; the geometry and material combination are optimised for stationary or slow to moderate feeds rather than aggressive, high‑overhang hand‑held drilling. We recommend the MetavCUT Profi Line Twist Drill for precision metalworking tasks — for any technical questions or to confirm suitability for a specific application, METAV Werkzeuge offers comprehensive advice: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48053-FDA Type: Type N Diameter: 5.3 mm Tip Angle: 135° Material: HSS‑G Execution: Short Flute Length: 52 mm Overall Length: 86 mm Shank Finish: Fully Ground Colour: Bright Finished For Use With: Drilling Machine Norm: DIN 338 Model Series: Profi Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Twist Drill Type N is primarily used for drilling high‑strength materials and larger diameters; its short form offers greater Stability and precision. The ground geometry makes it suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics, and it withstands higher loads while allowing cleaner, more accurate holes. Which three drill types are there? When choosing tools, consider three main categories: Metal drills (such as the MetavCUT Twist Drill), Wood drills, and Stone/Concrete drills. Each type is optimised for its respective material to ensure best performance and hole quality.
5.4mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
MetavCUT Twist Drill — Type N short, Ø 5.4 mm, HSS‑G, DIN 338, 135° The MetavCUT Twist Drill is a short Type N twist drill for Drilling Machines designed for precise metalworking, offering a 5.4 mm diameter, 135° tip angle and a HSS‑G ground geometry for high accuracy. Short Design for higher Stability 5.4 mm Diameter for precise Metalwork 135° Tip for hard Materials like Stainless Steel HSS‑G Ground for sharp, accurate Holes Conforms to DIN 338 for reliable Standards Faster, More Stable Drilling for Demanding Metalwork Compared with standard lengths, the short design reduces the exposed length of the tool and significantly increases stability and concentricity during operation. This leads to less vibration and more consistent hole quality when machining challenging Materials such as alloyed steel. The combination of fully ground shank and controlled geometry reduces required feed forces, which supports faster cycle times and lowers the risk of runout on both stationary and portable Drilling Machines. Precision Cutting Geometry That Improves Results A 135° tip angle and the ground flute geometry ensure reliable centring and smoother entry into hard Materials. The HSS‑G (ground high‑speed steel) construction produces very sharp cutting edges and high roundness accuracy, resulting in cleaner holes with reduced burr formation. For operators who demand repeatable hole quality, this configuration reduces the need for rework and simplifies downstream processes. Designed for Metal: Materials and Applications Engineered primarily for metalworking, this Type N short Twist Drill is suitable for unalloyed and alloyed steel, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics. The tool is especially practical when drilling smaller diameters in tougher Materials where rigidity and accurate guidance are essential. Its specification aligns with DIN 338, which classifies short twist drills with cylindrical shanks and confirms suitability for both stationary and mobile metalworking setups. Practical Advantages in Workshop Use Shorter overall length results in easier handling and reduced deflection during hand‑held or machine work, improving operator confidence and throughput. The ground design (HSS‑G) is straightforward to resharpen when required and gives excellent surface finish in drilled holes. While ground drills tend to be less ductile than rolled equivalents, best practice is to use appropriate coolant and moderate feed rates to prolong tool life and maintain consistent performance. Who Benefits Most from This Tool Ideal for professional metalworkers, toolrooms and repair workshops where precision and repeatability matter, the MetavCUT short Type N Twist Drill supports reliable results in production and maintenance tasks. Engineers and technicians who require fast, predictable penetration in harder Materials will appreciate the reduced feed force and improved centring behavior, which together reduce cycle times and scrap rates. Strong recommendation: Choose the MetavCUT short Type N Twist Drill for demanding metalworking tasks — for tailored technical advice or to confirm suitability for specific jobs, contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 48054‑FDA Diameter: 5.4 mm Tip Angle: 135° Type: Type N Execution: short Colour: bright finished Shank: fully ground Material: HSS‑G Spiral Length: 52 mm Overall Length: 86 mm For Drilling Machine: Drilling Machine Model Series: Profi Line Application: Drills for metal Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Is the MetavCUT Twist Drill suitable for stainless steel and hardened alloys? The MetavCUT Twist Drill in Type N with a 135° tip and HSS‑G ground geometry is designed to handle harder Materials such as stainless steel and alloyed steels; the larger tip angle improves centring and reduces walking when starting a hole. What are the benefits of the short version of this Twist Drill? A short Twist Drill offers higher stability and less tendency to bend, which produces more precise holes and allows lower feed forces; the short design is therefore well suited to precise workshop and toolroom operations. For what is a Twist Drill used? A Twist Drill, such as the MetavCUT Type N short Twist Drill, is mainly applied when machining high‑strength Materials and larger diameters; its shape is easy to resharpen and it endures substantial loads during metalworking. Which three drill types exist? The three primary drill categories are Metal Drills, Wood Drills and Stone/Concrete Drills; the MetavCUT Twist Drill falls into the Metal Drills category and is optimised for metalworking tasks.
5.5mm HSS-G Body Drill ,double sided, black finished without margin - MetavCUT
Karosseriebohrer 59055-FDA von MetavCUT – Profi Line Karosseriebohrer 59055-FDA ist ein doppelseitiger HSS‑G Bohrer für präzises Metallbohren mit 135° Spitzenwinkel und kurzer, stabiler Bauform. Karosseriebohrer »59055-FDA« von MetavCUT Doppelseitig geschliffen: zwei Bohrspitzen nutzbar HSS‑G Material für Metall und Hartkunststoff 135° Spitzenwinkel für harte Werkstoffe Geeignet für Handbohrmaschine, Spirallänge 16 mm Langlebige HSS‑G Konstruktion für schnellere Bohrungen Die HSS‑G Ausführung des Karosseriebohrers sorgt durch CNC‑geschliffene Spannuten für saubere Schnitte und hohe Rundlaufgenauigkeit. Dadurch lässt sich das Werkstück schneller bearbeiten: Der geschliffene Bohrer ermöglicht bis zu 40 % schnellere Bohrungen bei gleichzeitig bis zu 50 % geringerer Anpresskraft im Vergleich zu herkömmlichen HSS‑Ausführungen. Diese Eigenschaft reduziert Werkzeugverschleiß und erhöht die Effizienz bei Serien‑ und Montagearbeiten. Doppelseitige Bauweise reduziert Ausfallzeiten Die doppelseitige Konstruktion bedeutet praktisch zwei Schneiden in einem Werkzeug: Wenn eine Seite stumpf ist, kann der Bohrer gewendet werden, sodass sofort weitergearbeitet werden kann. Besonders im Karosserie‑ und Blechbereich mit häufigen Niet‑ und Dünnblechbohrungen sparen Anwender Zeit und Materialkosten. Die kompakte Bauform bietet zudem erhöhte Stabilität bei kurzen Einspannlängen. Einsatzbereiche und Zielgruppen: Werkstatt, Karosseriebau und Montage Im Standard‑Bereich mit einem Durchmesser von 5,5 mm eignet sich dieses Werkzeug für Werkstätten, Karosseriebetriebe und Heimwerker mit hohen Ansprüchen. Der Karosseriebohrer ist ausgelegt für legierte und unlegierte Stähle, Gussstoffe, Nichteisenmetalle sowie Hartkunststoff und funktioniert zuverlässig in Hand‑ wie stationären Bohrmaschinen. Für Anwender, die häufig dünne bis mittlere Bleche bearbeiten, bietet er eine ausgewogene Kombination aus Präzision und Wirtschaftlichkeit. Sichere Anwendungshinweise für präzise Ergebnisse Für exakte Bohrbilder empfiehlt es sich, vor allem bei hoher Präzision, die Anbohrung mit einem Zentrierstift anzupunkten. Die Spitzenwinkel‑Geometrie von 135° erleichtert das Anbohren harter Werkstoffe wie Edelstahl. Zur Vermeidung von Überhitzung und Bruchneigung bei HSS‑G Werkzeugen ist der Einsatz von Kühlschmierstoff und eine geeignete Schnittgeschwindigkeit ratsam. Tiefe Bohrungen sollten in mehreren Stufen erfolgen, um Spanabfuhr und Werkzeugleben zu optimieren. Setzen Sie auf die Profi Line von MetavCUT und erhöhen Sie Effizienz sowie Standzeit in Ihrer Werkstatt — Bestellanfragen per eMail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 59055-FDA Marke: MetavCUT Bezeichnung: Karosseriebohrer Serie: Profi Line Fakten Durchmesser: 5,5 mm Gesamtlänge: 66 mm Spirallänge: 16 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS‑G (geschliffen) — sehr scharfe Kanten und hohe Präzision Ausführung: doppelseitig — Doppelendbohrer, beidseitig einsetzbar Schaftausführung: geschliffen — verbesserter Rundlauf Farbe: schwarz ohne Fase Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall FAQ Ist der Karosseriebohrer 59055-FDA für Edelstahl geeignet? Der Karosseriebohrer 59055‑FDA von MetavCUT eignet sich durch den 135° Spitzenwinkel und das Material HSS‑G gut für das Anbohren harter Werkstoffe wie Edelstahl, sofern geeignete Schnittgeschwindigkeit und Kühlung verwendet werden. Kann der Bohrer in einer Handbohrmaschine eingesetzt werden? Ja, der Karosseriebohrer 59055‑FDA ist für die Nutzung mit einer Handbohrmaschine vorgesehen; die geschliffene Schaftausführung unterstützt dabei einen stabilen Rundlauf. Wie lange ist die Spirallänge und warum ist das wichtig? Die Spirallänge beträgt 16 mm. Bei kurzen Bohrungen in Blechen sorgt diese Länge für zuverlässige Spanabfuhr und reduziert das Risiko von Verstopfungen. Was bedeutet doppelseitig geschliffen für den Arbeitsalltag? Doppelseitig geschliffen heißt, dass der Bohrer beidseitig verwendbar ist; das ermöglicht schnelles Weitermachen nach Abrundung einer Seite und verringert Ausfallzeiten in der Produktion. Welche Materialien können mit dem Karosseriebohrer bearbeitet werden? Der Karosseriebohrer 59055‑FDA (MetavCUT, Profi Line, SKU 59055‑FDA) ist geeignet für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff.
5.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N Short HSS-G (Diameter 5.5 mm, 135° point, Bright Finished) by MetavCUT The Twist Drill is a short Type N HSS-G metal drill designed for high-precision drilling in hard materials with a 5.5 mm diameter and a 135° point angle for improved centring and reduced chipping Short design for enhanced stability and precision Fully ground shank for high Runout accuracy Optimised 135° point for hard metals Conforms to DIN 338 for short twist drills Faster drilling with lower feed force in steel Precision Cutting Power for Hard Materials The Twist Drill in HSS‑G quality offers concentrated cutting performance for demanding metalworking tasks. Its 5.5 mm Diameter combined with a 135° Point Angle reduces the tendency to grab and improves centring in Stainless Steel and other hard alloys. The short overall length minimises overhang and vibration, which results in consistently cleaner Holes and longer tool life when used with appropriate Cutting Fluid. DIN 338 compliance ensures reproducible geometry for industrial and workshop applications. Short Geometry for Greater Stability and Faster Results A reduced Free Length makes this drill far less prone to bending during operation. The Short version with a Spiral Length of 57 mm and a Total Length of 93 mm is particularly suited to operations where stiffness and accuracy matter, including work on lathes, drill presses and hand Drilling Machines. The Fully Ground flute geometry produces sharp cutting edges and excellent Roundness, enabling up to 40% faster drilling and requiring 50% less feed force compared with conventional HSS drills in comparable conditions. Designed for Metalworkers and Precision Workshops This Type N Twist Drill is targeted at professionals and advanced hobbyists who process alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Non‑Ferrous Metals and Hard Plastics. The typical user benefits from precise hole dimensions and excellent surface finish, especially in materials that demand a 135° tip geometry. For applications that require repeatable accuracy, the Profi Line series by MetavCUT provides robust performance and reproducible results. Correct Use, Sharpening and Material Guidance The 135° Point is specially chosen for harder materials because a larger point angle shortens initial penetration time and improves tool life. Point sharpening reduces the cross‑cut at the tip, lowering friction and necessary feed force while improving centring in the workpiece. HSS‑G (ground high speed steel) stands for very sharp cutting edges and high Roundness, yet it can be more brittle than rolled variants; therefore, secure clamping and coolant are recommended to avoid breakage and to extend service life. Strong recommendation: Choose the MetavCUT Twist Drill Type N short HSS‑G for demanding metal drilling tasks — for personalised advice or further technical data contact METAV Werkzeuge for expert support via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 48055-FDA Diameter: 5.5 mm Point Angle: 135° Type: Type N Execution: Short Material: HSS-G Colour: Bright finished Shank Finish: Fully ground Spiral Length: 57 mm Total Length: 93 mm Application: Drills for metal Model Series: Profi Line Standard: DIN 338 Suitable For: Drilling Machine (Hand Drilling Machine) Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and where does the MetavCUT Twist Drill perform best? The MetavCUT Twist Drill (Type N, HSS‑G) is mainly used for machining High‑Strength materials and larger drill diameters; it excels when drilling alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Non‑Ferrous Metals and Hard Plastics because its geometry and material withstand higher loads while delivering precise holes. Which three main drill types exist? The three common drill categories are Metal drills, Wood drills and Stone/Concrete drills, each optimised in geometry and material for their specific substrate. Why are Twist Drills pointed? Pointing the tip reduces the Cross‑Cut at the Drill’s tip, which lowers friction and required feed force; this sharpening also improves centring in the Workpiece and results in cleaner holes. Can a Metal (HSS) drill be used for wood? A Metal drill can be used in Wood, but the guidance is worse and the hole finish is typically less clean; however, such drills are easier to resharpen and show less self‑pulling into the material than specialised wood drills Are you unsure whether this Twist Drill meets your requirements or need additional technical data? METAV Werkzeuge offers extensive, competent consultation — please contact us by eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 or WhatsApp: +49 170 2837271
5.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Profitieren Sie von der TIN-Beschichtung, der geschliffenen HSS-G-Ausführung und dem 135° Spitzenwinkel für langlebige, präzise Metallbohrungen; diese Kombination sorgt für höhere Standzeit und geringeren Schneiddruck. Bestellen Sie die MetavCUT Profi Line Spiralbohrer direkt über Metav oder fragen Sie unsere technische Beratung in Emmerich an. Spiralbohrer von MetavCUT – kurzer HSS-G Metallbohrer Der Spiralbohrer in Kurz-Ausführung ist für präzise Bohrungen in legierten und unlegierten Stahl konzipiert und bietet hohe Stabilität bei stationären und handgeführten Anwendungen. Kurze Ausführung für erhöhte Stabilität TIN-Beschichtung reduziert Reibung und Verschleiß Geschliffen (HSS-G) für scharfe Kanten und saubere Bohrlöcher Spitzenwinkel 135° für harte Werkstoffe Geeignet für Handbohrmaschine und stationäre Maschinen Langlebigkeit durch Beschichtung und Materialwahl Die TIN-Beschichtung auf dem geschliffenen HSS-G-Werkstoff verringert Reibung und schützt die Schneide bei metallischer Bearbeitung, wodurch die Standzeit spürbar verlängert wird. Durch den reduzierten Verschleiß sind weniger Werkzeugwechsel notwendig, was die Arbeitseffizienz erhöht. Für Anwender bedeutet das konkret weniger Stillstandzeiten und geringere Ersatzteilkosten bei Serien- und Einzelteilen. Präzision und Stabilität durch kurze Ausführung Die kurze Ausführung reduziert die Auskraglänge und minimiert Biegeverhalten, was zu höheren Rundlaufgenauigkeiten und saubereren Bohrbildern führt. Bei Bohrungen in Stahl und Gusseisen sorgt der 135° Spitzenwinkel für einen leichteren Anbohrvorgang und bessere Zentrierung. Anwender, die genaue Passungen und saubere Kanten benötigen, profitieren von der Kombination aus verkürzter Bauweise und geschliffener Geometrie. Anwendungsfelder und Zielgruppe Dieser Spiralbohrer eignet sich besonders für Werkstätten, Maschinenbau und Instandhaltung, wo präzise Metallbohrungen gefragt sind. Empfohlen ist die Verwendung in stationären Säulenbohrmaschinen sowie in robusten Handbohrmaschinen; die Ausführung ist ideal für legierten Stahl, Temperguss, Gusseisen, Nichteisenmetalle und Hartkunststoff. Für feinste Präzisionsarbeiten oder sehr tiefe Bohrungen sind alternative Bohrertechniken zu prüfen. Handhabung, Kühlung und Vorteile in der Praxis Beim Einsatz empfiehlt sich eine geeignete Kühlmittelzufuhr, damit die TIN-Beschichtung ihr Potenzial entfaltet und die Wärmebelastung reduziert wird. Der geschliffene Bohrer verlangt präzise Handhabung, liefert dafür jedoch saubere Bohrungen und erhöhten Vorschub bei reduziertem Anpressdruck. Durch die Fertigungsnorm DIN 338 ist die Kompatibilität mit gängigen Zylinderschaft-Aufnahmen gewährleistet. Empfehlung: Für präzise Metallbohrungen die MetavCUT Profi Line Spiralbohrer mit TIN-Beschichtung wählen und bei technischen Fragen den Technischen Beratungsservice von Metav in Emmerich per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 kontaktieren Technische Daten Artikelnummer: 41055-FDA Marke: MetavCUT Serie: Profi Line Ausführung: kurz Material: HSS-G Norm: DIN 338 Spitzenwinkel: 135° Schaft-Ausführung: geschliffen Farbe: TIN-beschichtet Typ: Typ N Verpackungseinheit: 10 Durchmesser: 5,5 mm Gesamtlänge: 93 mm Spirallänge: 57 mm Fakten Durchmesser: 5,5 mm Gesamtlänge: 93 mm Spirallänge: 57 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten TIN-Beschichtung reduziert Reibung und Verschleiß HSS-G geschliffen für hohe Schnittgüte kurze Ausführung für bessere Stabilität Geeignet für Handbohrmaschine und stationäre Maschinen DIN 338 Klassifikation Typ N Normalspirale ideal für Metall FAQ Wie unterscheidet sich der Spiralbohrer 41055-FDA von Standardbohrern? Der Spiralbohrer 41055-FDA von MetavCUT in Profi Line Ausführung kombiniert HSS-G-Material mit TIN-Beschichtung und kurzer Bauform, wodurch höherer Verschleißschutz und bessere Stabilität gegenüber Standardbohrern erzielt werden. Ist der Spiralbohrer für Edelstahl geeignet? Der MetavCUT Spiralbohrer mit 135° Spitzenwinkel ist für härtere Werkstoffe optimiert; bei Edelstahl empfiehlt sich Einsatz mit geeigneter Kühlung und angepasster Schnittgeschwindigkeit, um Standzeit und Schnittbild zu verbessern. Welche Vorteile bietet die geschliffene Schaft-Ausführung? Die geschliffene Ausführung sorgt für scharfe Kanten und hohe Rundlaufgenauigkeit, was saubere Bohrlöcher in Metall begünstigt; sie ist besonders vorteilhaft bei Passungsbohrungen und präzisen Anwendungen. Kann der Spiralbohrer in einer Handbohrmaschine verwendet werden? Ja, der Spiralbohrer ist für den Einsatz in Handbohrmaschine geeignet; durch die kurze Ausführung reduziert sich die Auslenkung, wodurch stabileres Bohren auch bei handgeführten Anwendungen möglich ist. Wofür steht die Norm DIN 338 bei diesem Bohrer? Die Norm DIN 338 klassifiziert kurze Spiralbohrer mit Zylinderschaft aus Schnellarbeitsstahl; beim MetavCUT Spiralbohrer bedeutet das standardisierte Abmessungen und Kompatibilität mit gängigen Maschinenaufnahmen.
5.6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Type N — short HSS‑G drill, 5.6 mm, 135°, bright finished The Twist Drill Type N short HSS‑G is a precision metalworking drill designed for drilling machines and demanding applications in harder Materials such as Steel and Cast Iron. Twist Drill Type N 5.6 mm, short HSS‑G Fully ground shank for high concentricity 135° Point for hard materials like Stainless Steel DIN 338 compliant short cylindrical drill Short design increases stability and accuracy Faster metalworking with less effort and more control The short Twist Drill in HSS‑G delivers a measurable productivity advantage: CNC‑ground geometry enables up to 40% faster drilling while requiring 50% less feed force compared with conventional HSS drills. This translates into shorter cycle times and reduced operator fatigue when working on alloyed and unalloyed Steel, Cast Steel, Gusseisen, Sintered Iron, and Hard Plastics. For professionals seeking efficient material removal and consistently clean holes, this drill reduces rework and increases throughput without sacrificing hole quality. Greater stability and precision thanks to reduced overhang A shorter overall length means a smaller exposed section from the chuck, which significantly improves stability and reduces deflection under load. In practice this yields straighter holes and better concentricity, particularly when using portable or stationary Drilling Machines. The compact design is ideal for tight setups or when working in jigs and fixtures where control is critical. Users will notice improved repeatability on series work and less vibration on demanding tasks. Geometry engineered for hard materials and clean starts The 135° point angle is chosen to penetrate harder Materials more reliably and to shorten the initial contact time with the workpiece. The Type N (normal spiral) flute geometry is a classic metalworking profile that balances efficient chip evacuation with robust cutting action. Being HSS‑G (ground) means the flutes and cutting edges are formed by grinding, producing very sharp edges and excellent runout accuracy. For less experienced users: grinding (not rolling) produces sharper corners and more precise holes, but requires proper cooling and reduced shock loading to avoid breakage. Recommended uses and suitable operators This short Twist Drill is targeted at professional machinists, maintenance technicians, and metalworking shops that demand accuracy in small to medium diameters. It performs best in metal applications up to medium hardness ranges and is well suited for both stationary machine tools and controlled hand drilling when used with appropriate speeds and coolant. For applications where extreme toughness is needed or frequent impact occurs, consider application‑specific alternatives and consult technical support for selection. I recommend MetavCUT’s Twist Drill Type N as the precision choice for metalworking tasks where stability and fast penetration matter most — for tailored advice or machining parameters contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271) Bezeichnung: Twist Drill Marke: MetavCUT SKU: 48056-FDA Durchmesser: 5.6 mm Spitzenwinkel: 135° Typ: Type N Ausführung: short Farbe: bright finished Schaftausführung: fully ground Material: HSS‑G Norm: DIN 338 Gesamtlänge: 93 mm Spirallänge: 57 mm Für Bohrmaschine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill best used for and which materials suit it? The MetavCUT Twist Drill Type N is primarily used for metalworking; it is especially effective when machining high‑strength Materials and larger hole diameters. The short HSS‑G design is suitable for alloyed and unalloyed Steel, Cast Steel, Gusseisen, Sintered Iron, Tempered Casts, Non‑Ferrous Metals and Hard Plastics, delivering precise holes and strong cutting performance. Which three basic drill types exist? The main drill types are Metal drills (e.g., the MetavCUT Twist Drill), Wood drills, and Stone/Concrete drills, each optimised in geometry and material for their specific substrate. Why are Twist Drills sharpened at the point? The tip sharpening reduces the cross‑cut at the drill point, which lowers friction and therefore requires less feed force. A properly sharpened MetavCUT Twist Drill centers more easily in the workpiece and cuts with reduced heat and wear. Can one use a metal Twist Drill to drill wood? A metal Twist Drill such as the MetavCUT Type N can be used in Wood, but guidance is reduced and hole finish may be inferior compared with dedicated Wood drills. Metal drills are easier to resharpen and have a lower tendency for self‑feeding, which can be advantageous for controlled drilling. For which drilling depths is the Twist Drill most commonly used? A full‑bore operation into solid material is typically performed with a Twist Drill. For diameters up to about 20 mm and drilling depths up to 100 mm, short or standard Twist Drills are the most frequently used tooling. What is better, HSS or HSSE? There is no universal superiority of HSSE over HSS. When choosing between HSS and HSSE, evaluate whether the specific working conditions—such as higher cutting temperatures or abrasive materials—justify the higher cost of HSSE for your MetavCUT Twist Drill application. If you are unsure whether this Twist Drill meets your requirements or you need additional technical data, METAV Werkzeuge offers extensive, competent advice — please contact us by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271
5.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Das kurze Fazit: Der Spiralbohrer von MetavCUT kombiniert HSS-G-Material und eine geschliffene Schaftausführung zu hoher Stabilität und präziser Bohrung in Metall; der 135° Spitzenwinkel erleichtert das Anbohren harter Werkstoffe und reduziert Ausriss. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder kontaktieren Sie unsere Beratung bei offenen Fragen. Spiralbohrer kurz von MetavCUT — Profi Line Der Spiralbohrer eignet sich als kurzer HSS‑G Metallbohrer für präzise Bohrungen in legiertem und unlegiertem Stahl sowie Gusswerkstoffen HSS‑G geschliffen für präzise Metallbohrungen Kurze Ausführung für höhere Stabilität 135° Spitzenwinkel für harte Werkstoffe DIN 338 Norm, Zylinderschaft kompatibel Geringere Anpresskraft, bis zu 40 % schnelleres Bohren Robuste Werkstoffwahl sorgt für Durchsatz und Präzision Bei härteren Materialien zahlt sich der Einsatz von HSS‑G aus: Der Schnellarbeitsstahl bietet hohe Schneidfähigkeit und Wärmebeständigkeit, sodass der Bohrvorgang stabil bleibt. Die geschliffene Fertigung sorgt für scharfe Schneiden und eine verbesserte Rundlaufgenauigkeit, was saubere Bohrlöcher ohne übermäßiges Ausbrechen ermöglicht. Daraus resultiert ein sofort spürbarer Produktivitätsvorteil gegenüber ungeformten Walzbohrern. Kürzere Ausführung erhöht Stabilität und Anwendersicherheit Weil die Auskraglänge reduziert ist, verringert sich das Risiko von Verbiegung und Bruch bei stationärem oder maschinellem Einsatz. Die kurze Ausführung ist speziell für stationäre Maschinen und Handbohrmaschinen geeignet, die einen festen Halt gewährleisten. Anwender profitieren von weniger Vibration, gleichmäßigerem Vorschub und damit konstanteren Bohrresultaten. Geometrie und Spitzenwinkel für anspruchsvolle Anwendungen Der 135° Spitzenwinkel wurde gewählt, um das Anbohren in harten Werkstoffen wie Edelstahl oder Temperguss zu erleichtern. Ein größerer Spitzenwinkel reduziert das Wandern auf der Oberfläche und verteilt die Anpresskraft, sodass weniger Vorschub nötig ist. Für Einsteiger: Der Spitzenwinkel beschreibt den Winkel an der Bohrerspitze und beeinflusst, wie schnell und sauber sich der Bohrer in das Material einarbeitet. Einsatzbereiche, Verarbeitung und Maschinenkompatibilität Dieser kurze Spiralbohrer ist nach DIN 338 klassifiziert und mit einem Zylinderschaft ausgestattet, was die Nutzung in handelsüblichen Spannfuttern erleichtert. Er ist geeignet für legierte und unlegierte Stähle, Gussstahl, Gusseisen sowie Nichteisenmetalle und Hartkunststoff. Für tiefergehende oder sehr große Durchmesser empfiehlt sich Mehrstufenaufbohren; für die hier angegebenen Abmessungen ist der Bohrer jedoch für typische Werkstatt‑ und Produktionsaufgaben ausgelegt. Pflegehinweise und Verarbeitungsroutine für längere Standzeit Kühlmittel und regelmäßiges Entgraten verlängern die Lebensdauer dieses Werkzeugs deutlich. Bei geschliffenen HSS‑Bohrern empfiehlt sich vorsichtiges Vorgehen bei Schlagbelastung, um Sprödbruch zu vermeiden. Durch die Kombination aus scharfer Geometrie und geeigneter Kühlschmierstoffzufuhr lässt sich die Standzeit maximieren und Wiederholgenauigkeit sichern. Empfehlung: Den MetavCUT Profi Line HSS‑G Spiralbohrer für präzise Metallbearbeitung direkt über Metav Werkzeuge beziehen — bei Fragen gerne per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 48057-FDA Marke: MetavCUT Serie: Profi Line Bezeichnung: Spiralbohrer Ausführung: kurz Fakten Durchmesser: 5,7 mm Gesamtlänge: 93 mm Spirallänge: 57 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS‑G (Schnellarbeitsstahl, geschliffen) Norm: DIN 338 (kurze Spiralbohrer) Schaftausführung: geschliffen (Zylinderschaft) Typ: Typ N (Normalspirale) Farbe: blank Für Bohrmaschine: Handbohrmaschine Hersteller: MetavCUT Modellserie: Profi Line SKU: 48057-FDA Ausführung: kurz Verpackungseinheit: 10 FAQ Für welche Materialien ist der Spiralbohrer von MetavCUT geeignet? Der MetavCUT Spiralbohrer der Profi Line eignet sich besonders für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Nichteisenmetalle und Hartkunststoffe; die HSS‑G Ausführung gewährleistet zuverlässige Leistung bei diesen Werkstoffen. Warum ist die kurze Ausführung vorteilhaft? Die kurze Ausführung reduziert Auskraglänge und erhöht dadurch Stabilität und Rundlaufgenauigkeit, was bei maschinellen Metallbohrungen zu saubereren Ergebnissen mit dem MetavCUT Spiralbohrer führt. Welche Bedeutung hat der 135° Spitzenwinkel? Ein 135° Spitzenwinkel erleichtert das Anbohren von harten Werkstoffen und reduziert das Wandern auf der Oberfläche; das führt bei dem MetavCUT Profi Line Werkzeug zu vereinfachtem Anbohren und weniger Ausriss. Ist der Bohrer kompatibel mit Standardspannfuttern? Ja, der Zylinderschaft entspricht der DIN‑Norm und ist für gängige Spannfutter geeignet; der geschliffene Schaft unterstützt sicheren Halt und gute Ausrichtung. Welche SKU hat der Bohrer und wo kann man weitere technische Daten anfragen? Die SKU lautet 48057-FDA; weitere technische Details und Beratung sind bei Metav Werkzeuge erhältlich, z. B. per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930.
5.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N Short HSS‑G, Ø 5.8 mm, 135° Tip, Bright Finished (MetavCUT) A short Twist Drill (Type N) for precision metalworking, designed for use in Drilling Machines and hand drills with a 135° tip for harder materials. Short HSS‑G design for improved stability 135° Tip for drilling harder materials Fully ground shank for excellent concentricity Conforms to DIN 338 for consistent quality Higher Productivity through Short Design and Reduced Feed Force The Twist Drill in a short execution delivers greater rigidity and reduced deflection thanks to its shorter overhang. The HSS‑G ground geometry enables up to 40% faster drilling and requires 50% less feed force compared with conventional HSS variants, resulting in quicker cycle times and less operator effort. This makes the tool particularly effective for demanding metal applications where accuracy and throughput matter. Precise Holes and Better Guidance for Hard Materials A fully ground shank and the Type N normal spiral geometry ensure superior concentricity and clean hole quality. The 135° tip angle is optimised for harder materials such as stainless and alloyed steels, reducing the risk of walking on the surface and shortening plunge time. Compliance with DIN 338 guarantees standardised dimensions and interchangeability for workshop workflows. Designed for Professional Metalworking and Workshop Use This short drill is aimed at machinists, maintenance technicians and professional workshops that require robust, repeatable results in metal. The ground flute geometry makes regrinding straightforward while preserving cutting edges; consequently, the tool offers longevity and simple refurbishment. Use the drill where stable clamping and coolant supply are available to maximise life and hole quality. Practical Handling Tips to Avoid Breakage and Extend Life Because ground short drills can be more brittle than rolled types, operate the tool with appropriate coolant and moderate speeds for the drilled material. Secure Workpiece clamping and minimal overhang are recommended to exploit the stability advantage. For best results in portable hand drills, ensure good axial support and avoid excessive side loads to reduce the risk of fracture. MetavCUT’s short Twist Drill Type N is recommended for precise metal drilling; for personalised advice or additional technical data please contact METAV Werkzeuge — we provide extensive, competent consultation by eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48058-FDA Type: Type N Diameter: 5.8 mm Spiral Length: 52 mm Overall Length: 86 mm Tip Angle: 135° Execution: Short Shank Finish: Fully ground Material: HSS‑G Colour / Surface: Bright finished For Machine: Drilling Machine Norm: DIN 338 Model Series: Profi Line Application: Drills for Metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Twist Drill Type N is primarily used for machining high‑strength materials and larger hole diameters; its shape is easy to regrind and it withstands increased loads, making it suitable for demanding metalworking tasks. Which three drill types exist? When comparing drill categories, the main groups are Metal drills, Wood drills and Stone/Concrete (Masonry) drills — the MetavCUT Twist Drill Type N belongs to the metal drill category and is optimised for Ferrous and Non‑ferrous Metals.
5.9mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Short, Type N) — 5.9 mm, 135° Tip, HSS‑G, Bright Finished, DIN 338 — MetavCUT Profi Line The Twist Drill (short Type N) is a precision metal drilling tool designed for demanding applications, offering a 135° tip for hard materials and a fully ground HSS‑G construction for clean, accurate holes. Short Design for Increased Stability and Precision 135° Tip Optimised for Hard Metals HSS‑G Ground for Sharp, Clean Holes Fully Ground Cylinder Shank for Accurate Runout High performance for demanding metalworking that reduces cycle times Short construction combined with the HSS‑G material ensures that this Twist Drill delivers faster drilling with lower feed force, particularly in tough alloys. The reduced overhang improves rigidity and significantly lowers the tendency to deflect, which translates into more consistent hole quality and fewer rejects. Users benefit from up to 40% faster penetration in many steels compared with conventional HSS drills and require noticeably less operator effort, making it an efficient choice for production and workshop environments. Robust manufacturing and standards that support precision Manufactured to DIN 338 as a short, ground drill with a cylinder shank, the tool features CNC ground flutes for precise geometry and sharp cutting edges. The designation HSS‑G (ground high‑speed steel) indicates a grinding process that yields very fine cutting edges and excellent runout characteristics; novices should note that ground drills are ideal for precision but may be less tolerant to shock loading than rolled variants. The fully ground shank aids concentricity in chucks and reduces vibration for cleaner holes. Designed application: reliable performance in metals and hard materials This short Type N Twist Drill is optimised for drilling in a wide range of metals including alloyed and unalloyed steels, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics. The 135° tip angle shortens the initial biting time on hard workpieces and helps to maintain centre accuracy when starting a hole. For users working with stainless steel or tempered materials, the geometry reduces workhardening at the entry and improves tool life under appropriate cooling conditions. Practical handling advice and recommended use cases Because of its shorter flute length (Spiral Length 52 mm, Overall Length 86 mm) the drill is particularly suitable for stationary and portable drilling where stiffness and repeatability matter. For best results, use moderate cutting speeds, adequate coolant and a stable clamping setup. The ground tip offers excellent centring, but operators should avoid side loads and impact to prevent premature breakage. The bright finished surface facilitates chip evacuation while keeping adhesion of lubricants minimal. Who benefits from this tool and why it stands out Workshops, toolrooms and manufacturers seeking consistent, high‑quality holes in metal will appreciate the balance of stability and cutting speed offered by this short Twist Drill. The MetavCUT Profi Line focuses on repeatability and industrial robustness, making the tool suitable for both prototype work and small‑batch production where accuracy is critical. Its combination of a short design, HSS‑G manufacture and Type N spiral makes it a reliable choice for craftsmen and professionals alike. Strongly recommend the MetavCUT short Twist Drill (Type N) for precision metal drilling — for expert advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 48059-FDA Type: Type N Diameter: 5.9 mm Tip angle: 135° Spiral length: 52 mm Overall length: 86 mm Execution: Short Shank finish: Fully ground Material: HSS‑G Colour: Bright Finished Application: Drills for metal Model series: Profi Line Standard: DIN 338 Intended for drilling machine: Drilling Machine (Handbohrmaschine) Packaging unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit the MetavCUT Type N short Twist Drill? The MetavCUT Twist Drill (short, Type N) is primarily used for drilling metal; it performs especially well in alloyed and unalloyed steels, cast iron, sintered iron, non‑ferrous metals and hard plastics, offering precise holes and improved centring in demanding tasks. Which three drill types exist and how does the MetavCUT Twist Drill relate to them? The three common drill types are Metal Drill, Wood Drill and Masonry/Concrete Drill; the MetavCUT Twist Drill is a Metal Drill of Type N, optimised for metalworking and not intended as a specialist wood or masonry bit.
5mm HSS-G Body Drill ,double sided, black finished without margin - MetavCUT
Die Kombination aus HSS-G Geschliffenem Schaft, 135° Spitzenwinkel und doppelseitiger Konstruktion sorgt für präzise, wirtschaftliche Bohrungen in Stahl und Blech. Profitieren Sie von hoher Rundlaufgenauigkeit und der Möglichkeit, den Bohrer schnell umzudrehen. Bestellen Sie den Karosseriebohrer direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. Karosseriebohrer von MetavCUT Profi Line Der Karosseriebohrer bietet eine robuste, doppelseitige Ausführung für schnelle und präzise Bohrungen in Metall bei Montage und Instandsetzung. Doppelseitiger Doppelendbohrer beidseitig nutzbar HSS-G geschliffen für scharfe Kanten und Präzision 5 mm Durchmesser für Blech- und Karosseriearbeiten 135° Spitzenwinkel für härtere Werkstoffe 16 mm Spirallänge für effiziente Späneabfuhr Präzise Schnitte durch geschliffene HSS-G Geometrie Die HSS-G Legierung kombiniert Härte mit Zähigkeit und der CNC-geschliffene Schaft sorgt für besonders scharfe Kanten. Diese Geometrie reduziert Vibrationen und verbessert die Rundlaufgenauigkeit, was saubere Bohrlöcher in legierten und unlegierten Stahl ermöglicht. Für Anwender bedeutet das weniger Nacharbeit und eine höhere Ausbeute bei Serien- und Einzelarbeiten. Doppelseitige Konstruktion für geringere Stillstandszeiten Der Einsatz als Doppelendbohrer macht den Bohrer praktisch wie zwei Werkzeuge in einem: bei Verschleiß einfach umdrehen und weiterarbeiten. Das spart Zeit in der Werkstatt und reduziert Werkzeugkosten. Gleichzeitig sorgt die kurze, stabile Bauform für bessere Führung bei Niet- und Dünnblecharbeiten und minimiert das Risiko von Verkantungen bei Handbohrmaschinen. Optimal abgestimmt auf Handbohrmaschinen und Karosseriearbeiten Mit einem 5 mm Durchmesser zählt dieser Bohrer zum Standard-Bereich und ist ideal für Werkstatt, Montage und DIY-Projekte an Karosserie und Blech. Die 16 mm Spirallänge unterstützt die Späneabfuhr bei flachen bis mittleren Materialien, während die schwarze Oberflächenbehandlung ohne Fase Korrosionserscheinungen im Lagerung verhindert. Dadurch ergeben sich zuverlässige Ergebnisse bei gängigen Metallarten wie Stahl, Guss und Nichteisenmetallen. Praxisgerechte Hinweise für sicheren Einsatz Der 135° Spitzenwinkel erleichtert das Anbohren harter Werkstoffe und vermindert Anpresskraft. Für maximale Standzeiten empfiehlt sich die Nutzung von Kühlung bei stationärem Einsatz und eine moderate Vorschubgeschwindigkeit bei Handmaschinen. Bei empfindlichen Bauteilen ist ein Anpunktieren empfehlenswert, um Abrutschen zu verhindern und das Bohrbild zu verbessern. Vertrauen Sie auf die Präzision der MetavCUT Profi Line und sichern Sie sich den Karosseriebohrer über Metav mit fachlicher Beratung aus Emmerich — bei Fragen: info@metav-werkzeuge.com oder +49 2822 7131930 Produktmerkmale Artikelnummer: 59050-FDA Marke: MetavCUT Bezeichnung: Karosseriebohrer Serie: Profi Line Daten Durchmesser: 5 mm Gesamtlänge: 62 mm Spirallänge: 16 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (geschliffen) Ausführung: doppelseitig Schaftausführung: geschliffen Farbe: schwarz ohne Fase Für Bohrmaschine: Handbohrmaschine Geeignet für: Bohrer für Metall FAQ Für welche Materialien eignet sich der Karosseriebohrer am besten? Der MetavCUT Karosseriebohrer eignet sich besonders für legierten und unlegierten Stahl, Gussstahl, Gusseisen sowie Nichteisenmetalle und Hartkunststoff; die HSS-G Geometrie ist auf solche Werkstoffe ausgelegt. Ist der Bohrer für Handbohrmaschinen geeignet? Ja, der Karosseriebohrer ist für den Einsatz in Handbohrmaschinen vorgesehen; durch die kurze, stabile Bauform lässt sich der 5 mm Bohrer gut führen und minimiert Verkantungsrisiken. Was bedeutet HSS-G geschliffen beim Bohrer? HSS-G steht für hochleistungsfähigen Schnellarbeitsstahl mit CNC-geschliffener Geometrie; das Ergebnis sind besonders scharfe Kanten, hohe Rundlaufgenauigkeit und saubere Bohrlöcher, allerdings erfordert das Material sorgfältige Handhabung und Kühlung bei starkem Einsatz. Wie wirkt sich der 135° Spitzenwinkel auf die Bohrleistung aus? Der 135° Spitzenwinkel verringert die Anbohrkräfte bei härteren Werkstoffen und verkürzt die Anbohrzeit, was insbesondere bei Edelstahl oder temperhartem Material Vorteile bringt. Kann der Bohrer in Serienanwendungen verwendet werden? Der MetavCUT Karosseriebohrer ist robust für wiederholte Einsätze, bei intensiver Serienfertigung in gehärtetem Stahl sollte jedoch auf speziell gehärtete Vollhartmetallwerkzeuge gewechselt werden.
Maximum uptime for heavy-duty drilling with profi line twist drills
Profi line twist drills deliver peak performance for continuous, heavy-duty machining and automated CNC production. Designed for demanding metalcutting specialists, these high-performance twist drills maintain cutting ability and dimensional accuracy under extreme heat and prolonged use.
Why the design matters for industrial production
Built from high-alloy high-speed steel and precision ground from solid stock, the profi line twist drills resist wear where it counts. A cobalt-enriched grade (commonly HSS-Co with 5% or 8% cobalt) provides exceptional red hardness; advanced coatings such as TiN or TiAlN reduce friction and extend tool life. A flatter 135° tip angle combined with a cross grind (split point) gives reliable self-centring without prior centre punching and promotes smooth chip evacuation via precision flutes — essential for stainless and alloyed steels, tempered materials and difficult-to-machine titanium alloys in series production.
Tangible benefits that reduce production costs
- Longer tool life and reduced tool-change frequency thanks to cobalt-enriched HSS and hard-wearing coatings
- Improved hole quality and repeatability through precision grinding and optimised tip geometry
- Process security in automated cells: reliable centring and controlled chip evacuation lower scrap rates
- Suitable for high cutting speeds, maintaining form and hardness under thermal load
- Lower total cost of ownership in serial machining and heavy-duty applications
Metav as your precision partner for profi line tools
Choose Metav for a pragmatic supply strategy: decades of expertise, a quality filter at the Emmerich hub and a broad portfolio that simplifies sourcing. Metav supports industry and trade with over 250,000 products, and the trust of more than 48,000 customers underlines consistent quality and dependable delivery. When process stability matters, Metav’s offering of profi line twist drills is positioned as the smart, reliable option.
In brief
Profi line twist drills combine cobalt-enriched high-speed steel, precision grinding and advanced coatings to deliver maximum stand time, process reliability and hole quality in the most demanding machining tasks.
Key technical data
- material: high-alloy high-speed steel (HSS-E), often cobalt-enriched (HSS-Co, 5% or 8%)
- manufacture: precision ground from solid stock (HSS-G)
- coating: common variants TiN, TiAlN
- tip geometry: flatter 135° point with cross grind (split point) for self-centring
- performance: designed for high cutting speeds and heavy, continuous loads
- applications: stainless steel (V2A/V4A), high-alloy carbon steels, tempered/quenched steels, titanium alloys
- chip control: high-precision flutes for reliable chip evacuation in automated CNC machining
FAQ
What makes profi line twist drills suitable for automated CNC production?
Profi line twist drills combine precision grinding, a flatter 135° tip and optimised flutes that ensure self-centring, consistent hole geometry and dependable chip evacuation — all features that support process security in automated CNC environments.
Can profi line twist drills handle stainless and heat-resistant steels?
Yes. The cobalt-enriched HSS-Co grades and hard-wearing TiAlN or TiN coatings sustain cutting performance and dimensional stability when machining stainless and acid-resistant steels commonly used in industry.
How do the coatings affect tool life and performance?
Coatings such as TiN and TiAlN reduce friction and thermal wear at the cutting edge, which translates into longer tool life, fewer tool changes and better repeatability in series production when using profi line twist drills.
Why choose Metav as the supplier for profi line twist drills?
Metav combines decades of precision expertise with a comprehensive product range and a quality-control hub in Emmerich. That combination provides reliable availability and a level of assurance valued by more than 48,000 customers.
Are profi line twist drills suitable for titanium alloys and other hard materials?
Yes. The material selection (HSS-Co), precision geometry and suitable coatings make profi line twist drills appropriate for machining titanium alloys and other challenging, high-strength materials.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com