Profi Line twist drills for extreme industrial performance
Profi Line twist drills are designed for continuous, heavy-duty drilling in automated CNC and industrial metalworking, delivering maximum tool life and process reliability when machining high-strength steels, stainless alloys and tough titanium grades. These high-performance tools, made from high-speed steel (HSS) often enriched with 5% or 8% cobalt, combine precision ground flutes with advanced coatings such as TiN and TiAlN to reduce friction and extend wear resistance. An optimised 135° point angle and cross-ground tip ensure excellent self‑centring, reduced required feed force and clean chip evacuation, enabling precise bores without pre‑spotting on smooth surfaces. Trusted in machine, tool and plant construction, the Profi Line provides outstanding stand time and drilling consistency for demanding series production.
5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill 5 mm (Type N) – Short HSS‑G, 135° Tip, Bright Finished, Fully Ground, DIN 338 by MetavCUT The Twist Drill Type N short design is a 5 mm metal drill for Drilling Machines, engineered for precise, stable holes in hard materials such as alloyed and unalloyed steel. Short design for increased stability and precision Fully ground HSS‑G for sharp cutting edges 135° tip angle suited to hard materials DIN 338 compliant for short cylindrical shanks Ideal for professional metalworking and workshop use Precision and Stability for Metalworking The short design of this Twist Drill reduces the unsupported length outside the chuck, which directly increases stability and reduces deflection during drilling. For users who require accurately placed holes in metallic components, the reduced overhang means less vibration and a more concentric hole. This makes the tool particularly suitable for stationary and portable Drilling Machines where repeatability and hole quality matter. Material and Cutting Performance that Saves Effort Made from HSS‑G (ground high speed steel), the Twist Drill delivers very sharp cutting edges and high Runout accuracy after manufacture. The fully ground flute geometry enables up to 40% faster drilling performance and requires around 50% less feed force compared with conventional HSS variants, which benefits operators by lowering effort and tool wear. The 135° tip is optimised for harder materials and shortens initial penetration time while improving centring. Designed for Professional Applications and Materials This Type N Twist Drill is designed primarily for metalworking: alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Materials, Non‑Ferrous Metals and Hard Plastics. The short flute length and robust geometry make it the preferred choice for workshops, toolmaking and maintenance departments that demand clean, precise holes and reliable performance under continuous use. The Profi Line model series emphasises durability and consistent results. Handling, Regrinding and Best Practice To achieve best results, use coolant or lubrication when drilling harder metals and operate the Twist Drill at appropriate speeds for the 5 mm diameter. Because the drill is ground rather than rolled, it provides very sharp edges and excellent hole finish but is somewhat more brittle; avoid excessive lateral forces and favour fixed or well‑supported setups. If regrinding is required, maintain the 135° tip geometry to preserve centring behaviour and reduce required feed force. We recommend MetavCUT’s short HSS‑G Twist Drill for precision metalworking — for personalised advice and technical assistance please contact METAV Werkzeuge; Email: info@metav-werkzeuge.com; Phone: +49 2822 7131930; WhatsApp: +49 170 2837271 Technical Details Designation: Twist Drill Brand: MetavCUT SKU: 48050-FDA Diameter: 5 mm Tip Angle: 135° Type: Type N Material: HSS‑G Execution: short Shaft Finish: fully ground Flute (Spiral) Length: 52 mm Overall Length: 86 mm Colour / Surface: bright finished For Use With: Drilling Machine Model Series: Profi Line Standard: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and where does MetavCUT recommend it? The MetavCUT Twist Drill Type N is used primarily for drilling Metal; it excels when making holes in alloyed and unalloyed Steel, Cast Iron and similar hard materials. Its short design improves stability and is recommended for precision workshop and industrial applications. Which three drill bit types exist and how does this Twist Drill fit in? There are three common drill bit categories: Metal Drill Bits, Wood Drill Bits and Masonry/Concrete Drill Bits. The MetavCUT Twist Drill belongs to the Metal Drill Bit group and is engineered for metalworking tasks where a conventional wood or masonry bit would be unsuitable. Why are Twist Drills pointed? The tip sharpening on a Twist Drill reduces the cross‑edge at the point. By pointing, friction is significantly decreased which lowers the required feed force and improves centring of the drill in the workpiece. Can the Twist Drill be used for wood? A Metal Drill Bit such as the MetavCUT Twist Drill can be used in Wood, but guidance and finish are usually inferior compared with dedicated Wood bits. Metal drills are easier to regrind and offer less self‑feeding, so results may be acceptable for non‑critical woodwork.
5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Kompakter Kurzbohrer für präzise Metallarbeiten: Die Kombination aus HSS-G geschliffener Schneide und TIN-beschichteter Oberfläche sorgt für hohe Standzeit und saubere Bohrbilder. Die kurze Ausführung reduziert Auslenkung und erhöht Rundlaufgenauigkeit, ideal für harte Werkstoffe. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer kurz HSS-G 5 mm von MetavCUT Der Spiralbohrer ist eine kurze Ausführung für präzise Bohrungen in Metall bei Hand- und stationären Maschinen Kurzbohrer für hohe Stabilität HSS-G geschliffen für scharfe Kanten TIN-beschichtet für verlängerte Lebensdauer 135° Spitzenwinkel für harte Werkstoffe Geeignet für Handbohrmaschine und Werkstatt Mehr Präzision bei Metallbohrungen durch kurze Ausführung Die kurze Ausführung reduziert die Auskraglänge und minimiert so Vibrationen und Verbiegen beim Bohren in Metall. Dadurch entsteht eine bessere Rundlaufgenauigkeit und sauberere Bohrlöcher, was besonders bei Passungen und nachfolgenden Montagearbeiten wichtig ist. Die geschliffene Geometrie sorgt für sehr scharfe Schneiden und konstante Zentrierung, wodurch sich die Fehlerquote bei wiederholten Bohrungen reduziert. Effizienteres Arbeiten dank Spezialbeschichtung und Geometrie Die Kombination aus HSS-G Material und TIN-beschichteter Oberfläche verringert Reibung und Hitzeentwicklung beim Bohren von Stahl und Nichteisenmetallen. Im Praxisbetrieb ermöglicht die Geometrie ein 40 % schnelleres Bohren bei gleichzeitig 50 % weniger Anpresskraft gegenüber herkömmlichen HSS-Bohrern, was Produktivität und Anwenderkomfort steigert. Vielseitige Einsatzgebiete und Zielgruppen Der 5 mm Durchmesser gehört zum Standard-Bereich und eignet sich für Werkstatt, Montage und DIY-Anwendungen an dünnen bis mittleren Blechen, Profilen und Maschinenteilen. Dieser Bohrer ist für Anwender gedacht, die Präzision und Zuverlässigkeit erwarten, etwa Fachhandwerk, Instandhaltung und produktionsnahe Werkstätten. Bei sehr feinen Präzisionsaufgaben oder extrem tiefen Bohrungen sind spezialisierte Werkzeuge empfehlenswerter. Anwendungshinweise für Langlebigkeit und Sicherheit Für optimale Ergebnisse empfiehlt sich die Nutzung eines Kühlschmierstoffs und eine geeignete Schnittgeschwindigkeit, besonders bei legiertem Stahl. Der 135° Spitzenwinkel erleichtert das Anbohren harter Werkstoffe und reduziert Ausriss. Geschliffene Ausführungen bieten hohe Schärfe, erfordern jedoch stationäre oder stabile Führungen, um Bruchrisiken zu minimieren. Empfehlung: Mit dem TIN-beschichteten Kurzbohrer von MetavCUT sichern Werkstatt und Produktion konstante Präzision und längere Standzeiten — Bestellungen und technische Beratung über Metav Werkzeuge in Emmerich, per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 41050-FDA Marke: MetavCUT Serie: Profi Line Bezeichnung: Spiralbohrer Norm: DIN 338 Material: HSS-G Ausführung: kurz Schaftausführung: geschliffen Farbe: TIN-beschichtet Typ: Typ N Verpackungseinheit: 10 Für Bohrmaschine: Handbohrmaschine Anwendungen: Bohrer für Metall Fakten Durchmesser: 5 mm Gesamtlänge: 86 mm Spirallänge: 52 mm Spitzenwinkel: 135° Besonderheiten Beschichtung: TIN-beschichtet Fertigungsart: geschliffen (HSS-G) DIN-Norm: DIN 338 definiert kurze Spiralbohrer mit Zylinderschaft Einsatzgebiet: Metallbearbeitung Vorteil: reduzierte Auslenkung durch kurze Auskraglänge FAQ Ist der Spiralbohrer für Edelstahl geeignet? Der Spiralbohrer von MetavCUT mit 135° Spitzenwinkel ist für harte Werkstoffe geeignet, bei Edelstahl empfiehlt sich die Verwendung von Kühlschmierstoff und angepasste Schnittgeschwindigkeit. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, der 5 mm Kurzbohrer ist für Handbohrmaschine und werkstattübliche Maschinen vorgesehen; bei hohen Anforderungen an Präzision ist eine stationäre Führung empfehlenswert. Wie unterscheidet sich die geschliffene Ausführung von rollgewalzten Bohrern? Geschliffene HSS-G Bohrer bieten schärfere Kanten und höhere Rundlaufgenauigkeit, sind jedoch empfindlicher gegenüber Verkantung und sollten bevorzugt stationär oder mit stabiler Führung eingesetzt werden. Welche Vorteile bietet die TIN-Beschichtung? Die TIN-beschichtete Oberfläche reduziert Reibung und Hitze, verlängert die Standzeit und verbessert die Schneidleistung bei Metallbohrungen. Wieviele Bohrer sind in der Verpackungseinheit? Die Verpackungseinheit enthält 10 Bohrer unter der Artikelnummer 41050-FDA.
6.1mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill MetavCUT Profi Line — Type N, 6.1 mm, HSS‑G, Short, 135°, Bright Finished A short MetavCUT Twist Drill Type N for precise metal Drilling Machine work, optimised for hard materials and high stability. Short design for higher stability HSS‑G material for sharp, clean holes 135° tip angle for hard metals Fully ground shaft for superior runout Conforms to DIN 338 for short drills Greater Stability for Accurate Holes Short design reduces the unsupported length of the cutting tool, which directly improves Stability and reduces deflection during machining. The Short 6.1 mm geometry combined with a Fully Ground shaft leads to higher concentricity and cleaner bores when used in a Drilling Machine. As a result, fewer rework operations are required and hole tolerance is easier to maintain. Faster Penetration in Tough Materials Built from HSS‑G, this Short Type N drill achieves up to 40% faster drilling and requires around 50% less feed force compared with conventional HSS drills under comparable conditions. The 135° tip angle is optimised for harder substrates such as stainless steel and tempered alloys, shortening the initial breakthrough time and lowering axial loads on the machine spindle. Precise Application and Recommended Use Designed for metalworking, the Twist Drill Type N excels in drilling Alloyed and Unalloyed Steel, Cast Steel, Cast Iron and Non‑Ferrous Metals. The shortened spiral length limits chatter and makes this drill particularly suited for precise bench, column and stationary machining where coolant can be applied. For manual handfeeding in a Drilling Machine, the improved stability ensures repeatable centre positioning. Manufacturing Quality and Standards for Reliability Produced to DIN 338 as part of the Profi Line, the drill is delivered with a bright finished surface and a ground flute geometry that gives very sharp cutting edges and excellent runout characteristics. Ground flutes (HSS‑G) provide cleaner chips and a defined cutting geometry, though they can be more brittle than rolled variants and therefore benefit from controlled machining parameters and adequate cooling. Strong recommendation: choose the MetavCUT Profi Line short Twist Drill Type N for demanding metal drilling tasks; for advice on suitability, tool parameters or complementary tooling contact METAV Werkzeuge — expert consultation is available by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48061-FDA Diameter: 6.1 mm Spiral Length: 57 mm Overall Length: 93 mm Tip Angle: 135° Type: Type N Execution: Short Shaft Finish: Fully Ground Material: HSS‑G Colour: Bright Finished Model Series: Profi Line Application: Drills for metal Standard: DIN 338 For Drilling Machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the MetavCUT Twist Drill Type N be used on? The MetavCUT Twist Drill Type N is primarily specified for metalworking and is suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron and non‑ferrous metals; its HSS‑G construction and 135° tip make it particularly effective on harder materials. Is the MetavCUT Twist Drill Type N suitable for handheld drilling? The short configuration and fully ground shaft of the MetavCUT Twist Drill Type N improve stability and centring, so it can be used in hand drilling applications, but best results are achieved with a stationary Drilling Machine and appropriate coolant to avoid undue stress on the tool. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high‑strength materials and larger hole diameters. This form is easy to regrind and withstands higher loads while maintaining good cutting performance. Which 3 drill types exist? The three main drill categories are metal drills, wood drills and masonry/concrete drills. Why are Twist Drills sharpened? Sharpening reduces the cross‑edge at the tip of the Twist Drill, significantly lowering friction and therefore reducing the required feed force; it also improves centring of the tip in the workpiece. Can a metal drill be used in wood? A metal drill can be used in wood, but guidance and finish are usually inferior compared with purpose‑made wood bits; metal drills are easier to regrind and typically have less aggressive self‑feed.
6.2mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — short HSS‑G Metal Drill, 6.2 mm, 135°, Type N, Bright Finished A short Twist Drill (Type N) designed for precision metalworking and use in drilling machines, offering high stability and fast cutting performance Short design for greater stability and precision HSS‑G material for sharp, durable cutting edges 135° tip angle for harder materials and faster entry Fully ground shank for excellent runout accuracy Precision and Stability for Demanding Metalwork Shorter overall length and a reduced overhang provide significantly higher stability during cutting operations. The combination of a short geometry and a fully ground shank minimises vibration and deflection, so holes remain concentric and tolerances are easier to hold. This design is especially advantageous when machining hard materials or when using smaller diameters, because the stiffer setup reduces the risk of chatter and improves hole quality. Faster Cutting with Lower Feed Force Thanks to the HSS‑G grind and optimized geometry, this drill achieves up to 40% faster drilling rates while requiring around 50% less feed force than conventional HSS tools. The 135° tip angle shortens penetration time in tough alloys and stainless steels by reducing the initial cutting resistance. For users this means quicker cycle times and reduced operator effort, particularly on demanding jobs where efficiency and repeatability matter. Engineered for Metalworking and Machine Use Designed to meet DIN 338, this short twist drill is tailored for metal applications including alloyed and unalloyed steel, cast steels, cast iron, sintered iron, non‑ferrous metals and hard plastics. The Type N normal spiral makes it a versatile choice for conventional metal drilling. Because ground drills can be more brittle than roll‑formed types, it is recommended to use adequate cooling and, where possible, a machine setup rather than hand‑only operation to maximise tool life and prevent breakage. Practical Advice for Safe and Accurate Results When setting up, ensure the drill is clamped securely in a high‑precision chuck and that the workpiece is firmly supported to avoid movement. Start with a suitable pilot or centre drill where needed, and adapt cutting speeds to the material and drill diameter. Regular sharpening of the cutting lips maintains centring behaviour and hole finish; ground HSS tools deliver excellent runout accuracy but benefit from controlled feed and coolant during deep or interrupted cuts. Strong recommendation: choose the MetavCUT Profi Line short Twist Drill for precise, efficient metal drilling — for technical advice or to confirm suitability for your application contact METAV Werkzeuge; we provide expert consultation and comprehensive support. 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 48062-FDA Diameter: 6.2 mm Overall length: 93 mm Spiral length: 57 mm Tip angle: 135° Type: Type N Length execution: Short Shank execution: Fully ground Material: HSS-G Standard: DIN 338 Colour: Bright finished For drilling machine: Drilling Machine Application: Drills for metal Model series: Profi Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? A Twist Drill is primarily used for machining high‑strength materials and larger diameters; it is especially applied to metalworking where robust performance is required. The design is easy to regrind and withstands higher loads, making it a common choice for drilling steels and tougher alloys. Which three drill types are there? The basic categories are Metal drills, Wood drills, and Stone/Concrete drills. Each type features geometry and flutes adapted to its target material to ensure effective chip evacuation and hole quality. Can this Twist Drill be used in hand drills or only in machines? The MetavCUT Profi Line short Twist Drill is optimised for machine use to exploit its stability and precision, but it can be used in a quality handheld drilling machine for light tasks. For heavy or deep drilling in hard materials, a stationary drilling machine and coolant are recommended to avoid excessive stress on the tool. Why are twist drills point‑ground? Point grinding reduces the cross‑edge at the tip, significantly lowering friction so less feed force is required. A ground point also improves centring in the workpiece, leading to more accurate hole positions and smoother drilling starts.
6.3mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — MetavCUT Profi Line, 6.3 mm, 135°, Type N, Bright Finished, Short HSS‑G, DIN 338 The Twist Drill is a short Type N drill for Drilling Machines, designed for precise metal drilling in demanding industrial and workshop applications. Short design for higher stability HSS‑G ground for sharp cutting edges 135° tip angle for hard materials Fully ground shank for precise concentricity Conforms to DIN 338 for standardised quality Precision and faster drilling for metal components The MetavCUT short Twist Drill with HSS‑G material combines resilient cutting performance with precise geometry. Its 6.3 mm diameter and 135° tip angle reduce entry forces when penetrating hard metals, shortening drilling time and improving hole quality. This design is particularly suitable when drilling stainless steel or alloyed steels, because the larger tip angle helps centre the tool and minimises wandering on the work surface, delivering cleaner, more accurate holes. Short length increases rigidity and accuracy A shorter overall length means less overhang and therefore significantly higher Stability during machining. The reduced cantilever of this short execution lowers bending and chatter, which allows higher feed rates and better surface finish when compared with longer drills. For bench and machine work where runout and concentricity matter, the short Profi Line variant gives reproducible results and reduces the risk of breakage under heavier cutting loads. Ground geometry and material advantages explained The designation HSS‑G indicates a ground High Speed Steel, produced with CNC grinding to form the flutes and cutting edges. This results in very sharp edges and excellent roundness, which translate into precise holes and easier regrinding when required. The fully ground shank ensures accurate clamping and minimises axial runout in standard Drilling Machines. Customers benefit from improved tool life in many metalworking tasks, provided suitable cooling and moderate cutting parameters are used. Built for demanding metalworking tasks This Type N normal‑spiral drill is optimised for a wide range of metallic materials. It is particularly recommended for alloyed and unalloyed steels, cast and ductile irons, sintered metals and non‑ferrous metals, as well as hard plastics. The combination of short design, fully ground shank, and 135° tip supports reliable centring and consistent hole quality, making it a solid choice for toolrooms, maintenance shops and production environments focused on repeatable accuracy. Who should choose this Profi Line short Twist Drill Engineers, machinists and workshop professionals seeking reliable, precise metal drilling will appreciate the balance of speed and robustness offered by this tool. The short Twist Drill suits stationary and light moving machine applications where stability is crucial. For users prioritising easy reconditioning and sharp cut performance, the HSS‑G ground version offers straightforward resharpening and consistent results across repeated operations. Strong recommendation: Choose the MetavCUT Profi Line short Twist Drill for precision metal drilling — for expert, non‑binding advice contact METAV Werkzeuge by eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, or WhatsApp: +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 48063-FDA Diameter: 6.3 mm Tip angle: 135° Type: Type N Material: HSS‑G Execution: Short Spiral length: 63 mm Overall length: 101 mm Shank execution: Fully ground Finish/Colour: Bright finished Model series: Profi Line Application: Drills for metal For drilling machine: Drilling Machine Norm: DIN 338 Packaging unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for? The MetavCUT Twist Drill (Type N) is primarily applied to the machining of high‑strength materials and larger bore diameters. Its short, ground geometry is easier to sharpen and remains durable under greater loads, which makes it suitable for industrial metal drilling where tool resilience and repeatable hole quality are required. Which three drill types exist? When comparing drill categories, there are Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Twist Drill belongs to the Metal drills group and is engineered specifically for metalworking tasks rather than woodworking or masonry.
6.4mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
MetavCUT Twist Drill — Twist Drill, 6.4 mm, 135°, Type N, Bright Finished, Short, DIN 338, HSS-G A MetavCUT Twist Drill for precision metalworking, the short 6.4 mm Type N cutter delivers stable, fast drilling in hard materials Short design for increased stability and precision 6.4 mm Diameter for accurate metal drilling 135° Tip angle optimised for hard materials HSS-G Material with fully ground geometry Conforms to DIN 338 for standardised quality Engineered for faster, more stable metal drilling The MetavCUT Twist Drill in a short execution combines a compact overall length with a reduced overhang to deliver higher stability and less tendency to deflect. Manufactured from HSS‑G (high speed steel, ground), the bit features a precision ground flute geometry that produces clean holes and reduces cutting forces. The short geometry yields up to 40% faster drilling and requires significantly less feed pressure compared with conventional HSS versions, making it especially suitable for demanding tasks in workshops and production environments. DIN 338 classifies this type of short twist drill with a cylindrical shank, ensuring compatibility with standard chucks and consistent manufacturing tolerances. Optimised tip geometry for hard and alloyed materials A 135° tip angle reduces the initial bite and improves centring in tougher metals such as stainless steel and alloyed steels, shortening contact time and improving tool life. Type N (normal spiral) provides a balanced flute helix suitable for metalworking, while the fully ground shank guarantees excellent concentricity and low runout when mounted in a drilling machine or hand drill. For users less familiar with the terminology: HSS‑G denotes that the cutting geometry is produced by grinding rather than rolling, which results in very sharp cutting edges and high hole quality; however, the ground structure is generally more brittle and benefits from adequate cooling during prolonged operations. Practical benefits, target users and safe handling tips Workshop technicians, maintenance staff and professional machinists will appreciate the combination of short overhang and robust HSS‑G material for producing precise bores in cast iron, sintered parts, non‑ferrous metals and hard plastics. When using the drill in handheld applications, reduced flex leads to fewer broken drills and a more predictable drilling result. To avoid premature breakage, apply moderate pecking cycles on deep holes, use coolant for heat dissipation and clamp workpieces securely. If there is uncertainty whether this cutter matches specific requirements or when additional technical data is needed, Metav Werkzeuge provides extensive and competent advice and support. Strong recommendation: Choose the MetavCUT short HSS‑G Twist Drill (Type N) for demanding metal applications — for expert consultation contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Technical specifications Designation: Twist Drill Brand: MetavCUT SKU: 48064-FDA Model series: Profi Line Diameter: 6.4 mm Spiral length: 63 mm Overall length: 101 mm Tip angle: 135° Type: Type N Execution: Short Shank execution: Fully ground Finish / Colour: Bright finished Material: HSS-G Application: Drills for metal Suitable for: Drilling Machine / Hand drill Standard: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Twist Drill (Type N) is primarily used for machining high‑strength materials and larger bore diameters; its short, ground geometry makes it well suited to precise metalworking. This form is relatively easy to re‑sharpen and withstands significant loads while delivering clean bores, which is why it is often the tool of choice for workshops working with alloyed and unalloyed steel, cast iron and similar materials. Which three drill types are commonly distinguished? In general practice the main drill categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill group and is optimised for metalworking tasks.
6.5mm HSS-G Body Drill ,double sided, black finished without margin - MetavCUT
Karosseriebohrer (Body Drill) — HSS-G Twist Drill, 6.5 mm Diameter, 135° Tip, Double-sided, Black Finished Without Margin The Karosseriebohrer (Body Drill) is a double-sided HSS-G Twist Drill designed for precise metalworking with a 6.5 mm diameter and a 135° tip angle for demanding sheet and body applications. Double-sided twist drill for two usable cutting ends HSS-G material for precise metal drilling 6.5 mm Diameter with 135° Tip Angle Fully ground shank for high runout accuracy Black finished without margin for corrosion resistance Faster, more precise holes in hard metals The HSS-G construction and 135° tip angle are chosen to reduce drilling time and minimise feed force when working with tougher materials. Because the flute geometry is produced by CNC grinding rather than rolling, the Karosseriebohrer delivers high runout accuracy and clean hole edges, which is particularly valuable when preparing parts for riveting or welding. The sharper cutting edges also help extend tool life when used with appropriate cooling on stationary machines. Compact, double-ended design for workshop efficiency Designed as a double-sided / double-ended Twist Drill, this bit offers practical redundancy: if one tip becomes dull, simply reverse the bit and continue using the other end. The short, stable geometry suits thin-sheet and bodywork tasks and reduces vibration in hand and drilling machines. With a fully ground shank, clamping stability is improved, supporting consistent concentricity and safer operation in portable Drilling Machines. Where this drill performs best This Karosseriebohrer is optimised for metal drilling: alloyed and unalloyed steel, cast materials, non-ferrous metals and hard plastics. The 6.5 mm diameter and the chosen tip geometry make it particularly effective for holes used in body and panel work, rivet preparation and general maintenance tasks. Professionals in automotive repair, sheet metal workshops and maintenance departments will benefit from reliable entry behaviour and consistent hole quality. Handling, sharpening and application hints Because the flute geometry is ground, the twist drill requires careful handling: avoid aggressive impact and favour cooling when machining heat-sensitive or tougher cast materials to prevent premature chipping. If a tip becomes blunt, the double-ended design allows quick reversal; resharpening is possible but should respect the original 135° geometry to retain centring and cutting performance. Use steady feed and appropriate cutting fluid for best results with the HSS-G material. Strong recommendation from MetavCUT: choose this Karosseriebohrer for demanding metalwork where precision and durability matter — and contact METAV Werkzeuge for expert advice on application and tool selection; 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical information Designation: Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 59065-FDA Material: HSS-G Diameter: 6.5 mm Tip Angle: 135° Type / Execution: double-sided Colour / Finish: black finished without margin Suitable for: Drilling Machine (Hand Drills / Portable Drilling Machines) Spiral Length: 20 mm Overall Length: 70 mm Shank Execution: fully ground Model Series: Profi Line Application: Drills for metal Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the Karosseriebohrer (Body Drill) from MetavCUT drill effectively? The Karosseriebohrer by MetavCUT is suitable for alloyed and unalloyed Steel, Cast Steel, Gusseisen, sintered materials, non-ferrous metals and hard plastics, providing clean results when used with appropriate cutting fluid and machine speeds. Is the Karosseriebohrer suitable for use in a hand drill? Yes, the Karosseriebohrer (Body Drill) is designed for use with Drilling Machines including hand-held units, though optimal precision and cooling are achieved on stationary machines to reduce risk of breakage. For what is a Twist Drill used? A Twist Drill is primarily used for machining high-strength materials and larger bore diameters; its form is easy to sharpen and withstands significant loads, making it common in bodywork and sheet-metal applications. Which three drill types exist? The main categories are Metal drill bits, Wood drill bits, and Stone/Concrete drill bits. Why are Twist Drills sharpened? Sharpening reduces the cross cutting edge at the tip, which lowers friction and required feed force while improving centring of the tip in the workpiece. Can you use a metal drill to drill wood? A metal drill can be used in wood, but guidance and finish are inferior compared with purpose-made wood bits; metal drill bits are easier to resharpen and generally have less self-feed. At which drilling depths is the Twist Drill most commonly used? A solid bore is typically made with a Twist Drill; for diameters up to 20 mm and depths up to 100 mm the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The general assumption that HSSE is always superior to HSS is not correct; selection should consider working conditions and whether the higher acquisition cost of HSSE is justified.
6.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short HSS‑G Metal Drill, 6.5 mm, 135° (Type N, DIN 338, Bright Finished) The Twist Drill is a short HSS‑G drill for Drilling Machines, designed for precise metal drilling and heavy‑duty applications. Short HSS‑G design for demanding metal work Higher stability from reduced overhang and short length 135° tip for efficient entry in hard materials Fully ground shank for high concentricity DIN 338 compliant short twist drill Faster, more stable drilling for metal workpieces The Short Design of this HSS‑G Twist Drill reduces the protruding length from the Chuck, delivering noticeably higher Stability and reduced deflection when drilling into hard alloys. This stability directly improves hole accuracy and roundness, which is essential in workshop and industrial settings where repeatable results matter. Users benefit from lower scrap rates and less rework when tight tolerances are required. Lower feed force and improved penetration in hard materials A 135° Tip Angle combined with the ground geometry allows easier entry into harder materials such as stainless steel. The ground HSS-G geometry reduces the required feed force by up to 50% and can enable up to 40% faster drilling compared with conventional HSS variants. For applications that demand efficient material removal and less operator fatigue, this short Twist Drill offers measurable productivity gains. Precisely ground flute geometry for clean holes The fully ground flutes (HSS‑G) produce sharp cutting edges and excellent concentricity, resulting in clean, burr‑reduced holes and improved surface finish. This benefit is particularly useful when subsequent operations—such as reaming or tapping—rely on a high‑quality pilot hole. Note that ground drills can be more brittle than rolled types, so cooling and steady clamping are recommended for best tool life. Optimised for metal; simple explanation for non‑specialists Type N represents a classic metal Twist Drill spiral, intended for Metal Drilling rather than soft wood or masonry. In practical terms: choose this short HSS‑G drill when working on alloyed or unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. If drilling in wood or concrete, a different specialist drill type will deliver better guidance and hole quality. Robust standard compliance and practical handling tips Conforming to DIN 338 confirms that this short Twist Drill meets established industry dimensions and shank specifications, simplifying machine setup and toolholder selection. For consistent results: use appropriate coolant, clamp the workpiece securely, and avoid excessive overhang—even though the short length improves rigidity, correct machining practice remains decisive for tool life. Strongly recommended: choose the MetavCUT short HSS‑G Twist Drill for stable, precise metal drilling; for application advice or detailed technical data contact METAV Werkzeuge — expert consultation available by email, phone or WhatsApp at info@metav-werkzeuge.com / +49 2822 7131930 / +49 170 2837271 Technical data Designation: Twist Drill (Short) Brand: MetavCUT SKU: 48065-FDA Diameter: 6.5 mm Tip angle: 135° Type: Type N (Normal Spiral) Execution: Short Overall length: 101 mm Spiral length: 63 mm Shank execution: Fully Ground Material: HSS‑G (Ground High Speed Steel) Surface / Colour: Bright Finished For Drilling Machine: Drilling Machine (Hand Drill compatibility for small tasks) Norm: DIN 338 Application: Drills for Metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the short Twist Drill best used for? The short Twist Drill from MetavCUT is primarily used for Metal Drilling; its reduced overhang and HSS‑G geometry make it suitable for precise work in alloyed and unalloyed steel, cast components and hard plastics where accuracy and low deflection are required. How does the 135° tip affect drilling performance? A 135° tip on the MetavCUT Twist Drill provides a flatter cutting face that shortens penetration time in harder materials and improves centring for tough steels, making the tool more efficient for industrial metalworking tasks. What are Twist Drills used for Twist Drills are mainly applied when machining high‑strength materials and larger drill diameters. This form is easy to regrind and withstands higher loads, making it suitable for demanding metal cutting work. Which three drill types exist There are three common drill categories: Metal Drills, Wood Drills, Stone/Concrete Drills. Why are Twist Drills sharpened (pointed)? Sharpening the point reduces the cross‑cut at the tip, which significantly lowers friction and the required feed force. At the same time the sharpened point improves centring in the workpiece. Can you use a metal drill in wood? A Metal Drill can be used in Wood, but guidance and finish are inferior compared with dedicated wood bits. Metal Drills are easier to resharpen and have less self‑feeding tendency, resulting in a rougher hole in timber. For which drilling depths is the Twist Drill most used? A solid through hole is typically made with a Twist Drill. For diameters up to 20 mm and drill depths up to 100 mm, the Twist Drill is the most commonly used tool. Is HSS or HSSE better? The general belief that HSSE is always superior to HSS is not universally correct. Evaluate operating conditions carefully to decide whether the higher purchase cost of HSSE is justified for the intended application. If uncertain whether this MetavCUT Twist Drill meets specific requirements or for supplementary technical data, METAV Werkzeuge provides comprehensive and competent advice — contact info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271.
6.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill — Short Type N, 6.5 mm, TIN-coated HSS-G (MetavCUT) The Twist Drill short Type N is a precision metal-drilling bit for hand and drilling machines, engineered for stable, accurate holes in hard materials. Short design for high stability and precision 6.5 mm Diameter for standard metal holes 135° Point angle for harder materials TIN-coated HSS-G for extended tool life Fully ground shank for fast, clean drilling High stability and longer tool life for demanding metalwork Short-design Twist Drill bits combine a reduced overhang with superior rigidity, which minimizes vibration and deflection during drilling. The HSS-G substrate paired with a TIN-coated surface significantly lowers friction and wear; with appropriate cooling the coating helps to extend lifetime when machining alloyed and unalloyed steel, cast parts, copper alloys and hard plastics. This results in more consistent Hole Quality and fewer tool changes for production and workshop tasks. Geometry optimised for hard materials and fast centring A 135° point angle reduces walking and shortens the initial penetration time when tackling stainless steels and other tough metals. The fully ground flute geometry (HSS-G) produces sharp cutting edges and high runout accuracy, giving cleaner chips and improved centring compared with rolled drills. Classified as Type N and conforming to DIN 338, this design is the classic choice for metalworking where repeatable, precise results are required. Efficient performance with lower feed forces and robust construction The shortened overall length and fully ground shaft reduce the required thrust and improve stability under load; tests of comparable ground HSS tools show up to 40% faster drilling and about 50% less feed force, which benefits battery-powered and portable drilling machines as well as stationary equipment. The combination of short geometry and the TIN-coated surface makes this bit particularly suitable for workshop applications where throughput and hole integrity matter. Who benefits from this short metal drill bit and how to use it best Workshops, maintenance teams and precision fabricators will appreciate the MetavCUT short Twist Drill when consistent hole diameter and surface finish are priorities. Use moderate spindle speeds, steady feed, and an appropriate coolant for alloyed steels to maximise the advantage of the coating and ground cutting edges. The bit is matched to hand and drilling machines and is recommended for metal drilling tasks up to typical diameters and depths encountered in mechanical assembly and repair. Strong recommendation: For precision metalworking choose the MetavCUT Twist Drill short Type N with TIN coating — METAV Werkzeuge offers expert, personalised advice if you are unsure whether this tool suits your application; contact us by eMail: info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 41065-FDA Diameter: 6.5 mm Point angle: 135° Type: Type N Execution: short Material: HSS-G Coating/Colour: TIN-coated Shank execution: fully ground Flute length (Spirallänge): 63 mm Overall length (Gesamtlänge): 101 mm For drilling machine: Drilling Machine / Handbohrmaschine Norm: DIN 338 Model series: Profi Line Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill (Type N) is primarily used for machining high-strength materials and larger diameters; its short design is especially suitable for precise metalworking. It performs well on alloyed and unalloyed steel, cast iron, copper alloys and hard plastics. The geometry is easy to resharpen and withstands higher loads under proper cooling. Which three drill types are there? Typical categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group (Type N), optimised for metal applications rather than soft wood or masonry. Why are Twist Drills point-ground? Point grinding reduces the cross-edge at the tip of the Twist Drill, lowering friction and therefore reducing the required feed force. At the same time the ground tip improves centring in the workpiece for more accurate hole starts. Can the Twist Drill be used to drill wood? A metal Twist Drill can be used in wood, but guidance and hole finish are inferior compared with dedicated wood drills. The MetavCUT short metal drill is easier to resharpen and offers less self-feeding effect, so results in wood are possible but not optimal.
6.6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Der kurze Spiralbohrer von MetavCUT vereint HSS-G-Schneidstoff, geschliffene Präzision und einen 135° Spitzenwinkel für anspruchsvolle Metallarbeiten. Die kompakte Bauform reduziert Vibrationen und erhöht die Stabilität bei Hand- und stationärem Bohren; dadurch werden saubere Bohrbilder und längere Standzeiten erzielt. Bestellen Sie direkt über Metav oder kontaktieren Sie uns bei Fragen zur Anwendung. Spiralbohrer von MetavCUT — Profi Line, kurzer HSS-G Bohrer Spiralbohrer von MetavCUT, kurze Ausführung, für präzise Bohrungen in Metall bei Hand- und Maschinenbetrieb Kurzversion nach DIN 338 für mehr Stabilität Geschliffener HSS-G für saubere, präzise Bohrungen 6,6 mm Durchmesser, ideal für Standard-Metallarbeiten 135° Spitzenwinkel für härtere Werkstoffe Zylinderschaft für Handbohrmaschine, Gesamtlänge 109 mm Robuste Materialwahl für präzise Metallbearbeitung Der Einsatz von HSS-G als Schneidstoff sorgt für hohe Schneidhaltigkeit und Temperaturbeständigkeit bei Bohrungen in legierten und unlegierten Stahl. Die geschliffene Ausführung führt zu sehr scharfen Schneiden und hoher Rundlaufgenauigkeit, was saubere Bohrbilder ermöglicht. Dieser Vorteil reduziert Nachbearbeitung und erhöht die Effizienz bei wiederkehrenden Metallarbeiten. Kurze Bauform steigert Stabilität und Standzeit Die kurze Ausführung mit reduzierter Auskraglänge minimiert Durchbiegung und Vibration, wodurch Stabilität und Führung bei Handbohrmaschinen sowie stationären Maschinen deutlich verbessert werden. Für Anwender bedeutet das weniger Bruchrisiko und zuverlässigere Ergebnisse, besonders beim Bohren in harten Werkstoffen wie Temperguss oder Gusseisen. Geometrie und Spitzenwinkel für härtere Werkstoffe Der 135° Spitzenwinkel reduziert das Ausbrechen an der Einlaufkante und erleichtert das Anbohren von Edelstahl und hartem Stahl. In Kombination mit der Typ-N-Normalspirale ergibt sich ein ausgewogenes Eindringverhalten, das präzise Zentrierung und kontrollierten Spanabtransport unterstützt. Dadurch lassen sich definierte Bohrpassungen ohne übermäßigen Vorschub erzielen. Anwendungsbereiche und Zielgruppe Konzipiert für den Einsatz in Werkstatt und Industrie eignet sich dieser Bohrer besonders für Metallbearbeitung, Maschineninstandhaltung und Montagearbeiten. Die Ausführung empfiehlt sich für Anwender, die Wert auf Präzision und Wiederholgenauigkeit legen, etwa in der Metallverarbeitung, im Maschinenbau und bei anspruchsvollen Reparaturarbeiten. Hinweise zu Einsatz und Kühlung Bei stationärem Bohren in dichten Werkstoffen empfiehlt sich Kühlung zur Vermeidung von Überhitzung und zur Verlängerung der Standzeit. Durch den geschliffenen Schaft ist der Bohrer für präzise Einsätze vorgesehen; bei Handgebrauch auf festsitzende Spindelaufnahme und kontrollierten Vorschub achten. Eine angemessene Schmierung reduziert Werkzeugverschleiß und sorgt für konstante Bohrergebnisse. Empfehlung: Vertrauen Sie auf die Profi Line von MetavCUT mit HSS-G und kurzer Bauform für stabile, präzise Metallbohrungen — bei Fragen zur Anwendung erreichen Sie uns per E‑Mail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 48066-FDA Marke: MetavCUT Serie: Profi Line Bezeichnung: Spiralbohrer Typ: Typ N Norm: DIN 338 Material: HSS-G Schaft-Ausführung: geschliffen Farbe: blank Verpackungseinheit: 10 Daten Durchmesser: 6,6 mm Gesamtlänge: 109 mm Spirallänge: 69 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten kurze Ausführung Zylinderschaft Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall geschliffen (HSS-G = geschliffen) DIN 338 definiert kurze Spiralbohrer mit Zylinderschaft FAQ Ist dieser Bohrer für Edelstahl geeignet? Der Spiralbohrer von MetavCUT aus HSS-G mit 135° Spitzenwinkel ist gut geeignet für das Anbohren von härteren Werkstoffen wie Edelstahl; bei längeren Bohrungen Kühlung und moderater Vorschub empfehlen. Welche Aufnahme passt für den Schaft? Der geschliffene Zylinderschaft des MetavCUT Spiralbohrers passt in handelsübliche Spannfutter von Handbohrmaschinen und stationären Bohrmaschinen mit entsprechender Aufnahme. Wie viele Bohrer sind in einer Verpackungseinheit? Die Verpackungseinheit enthält 10 Stück; die SKU lautet 48066-FDA und gehört zur Serie Profi Line von MetavCUT. Eignet sich der Bohrer für Blindlöcher und lange Bohrungen? Wegen der kurzen Bauform und der Spirallänge von 69 mm ist der Bohrer besonders für kürzere, präzise Bohrungen geeignet; für tiefe Sacklochbohrungen werden längere Ausführungen empfohlen. Welche Vorteile bietet die geschliffene Ausführung gegenüber gewalzten Bohrern? Geschliffene Bohrer der Serie Profi Line bieten höhere Schärfe und Rundlaufgenauigkeit, was präzisere Bohrungen in Metall ermöglicht; sie können jedoch empfindlicher gegenüber Krafteinleitung sein und profitieren von kontrollierter Anwendung und Kühlung.
6.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Die kurze Ausführung kombiniert Stabilität und Präzision: reduzierte Auskraglänge minimiert das Verbiegen, der HSS-G-Werkstoff sorgt für scharfe Schnittkanten, und der Spitzenwinkel von 135° erleichtert das Anbohren harter Werkstoffe. Bestellen Sie den Spiralbohrer direkt über Metav oder fragen Sie unsere Beratung an, wenn Sie spezifische Anwendungen planen. Spiralbohrer — kurzer HSS-G-Bohrer für Metall Der Spiralbohrer in kurzer Ausführung für präzise Metallbohrungen mit geschliffener Geometrie und Zylinderschaft MetavCUT Profi Line Spiralbohrer Kurze Ausführung für höhere Stabilität beim Bohren Material HSS-G (geschliffen) für präzise Bohrungen Spitzenwinkel 135° für harte Werkstoffe Geeignet für Handbohrmaschine und Werkstattbetrieb Kompakte Bauform erhöht Standfestigkeit und Präzision Die kurze Ausführung reduziert die Auskraglänge und verbessert dadurch die Stabilität beim Bohren. Das führt zu weniger Vibrationen und geringerer Neigung zum Verbiegen, was besonders bei Bohrungen in Stahl oder Gusseisen die Qualität der Bohrung erhöht. Anwender profitieren von saubereren Bohrlöchern und höherer Wiederholgenauigkeit bei stationärer oder handgeführter Bearbeitung. Materialwahl und Schneidverhalten für Metallbearbeitung Der Einsatz von HSS-G kombiniert Härte und Schnitthaltigkeit mit hoher Oberflächengüte durch CNC-Schliff. Die geschliffene Geometrie erzeugt scharfe Kanten, die saubere Späne und präzise Bohrbilder ermöglichen. In Verbindung mit dem Spitzenwinkel 135° eignet sich diese Ausführung besonders für legierte und unlegierte Stähle sowie für Edelstahl, da das Anbohren erleichtert wird und das Werkzeug stabiler in harten Werkstoffen arbeitet. Kompatibilität mit Werkzeugen und typischen Anwendungen Dieser Bohrer ist für Anwendungen im Standard-Bereich konzipiert und eignet sich für Werkstatt, Montage und DIY-Projekte. Die Kombination aus Zylinderschaft und robuster Ausführung erlaubt die Nutzung in Handbohrmaschine und stationären Maschinen. Für hochpräzise Passungen sollte jedoch vor dem Bohren angesenkt oder mit einem Zentrierbohrer gearbeitet werden, um ein Wandern des Bohrers zu vermeiden. Verarbeitungsempfehlungen und praktische Hinweise Bei der Verwendung von geschliffenen Bohrern empfiehlt sich der Einsatz von Kühlschmierstoff, insbesondere bei zähen oder wärmeleitfähigen Werkstoffen, um Überhitzung und vorzeitigen Verschleiß zu vermeiden. Die geschliffen Ausführung liefert hohe Rundlaufgenauigkeit, ist jedoch empfindlicher gegen seitliche Belastung als walzgefertigte Bohrer; deshalb ist ruhige Führung und geeignete Aufnahme wichtig für eine lange Werkzeugstandzeit. Empfehlung: Für präzise Metallbohrungen die MetavCUT Profi Line HSS-G Kurzvariante wählen und bei Metav anfragen — eMail: info@metav-werkzeuge.com / Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: 48067-FDA Marke: MetavCUT Serie: Profi Line Bezeichnung: Spiralbohrer Zahlen Durchmesser: 6,7 mm Gesamtlänge: 109 mm Spirallänge: 69 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (geschliffen) Schaftausführung: geschliffen, Zylinderschaft Norm: DIN 338 Typ: Typ N Farbe: blank Für Bohrmaschine: Handbohrmaschine Ausführung: kurz FAQ Für welche Materialien ist dieser Bohrer geeignet? Der MetavCUT Profi Line Spiralbohrer mit HSS-G eignet sich für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen sowie Nichteisenmetalle und Hartkunststoffe und bietet dabei saubere Bohrbilder. Ist der Bohrer für die Nutzung in einer Handbohrmaschine geeignet? Ja, die kurze Ausführung des MetavCUT Profi Line Spiralbohrers wurde speziell für den Einsatz in Handbohrmaschine und Werkstatt entwickelt und reduziert die Neigung zum Verbiegen. Was bedeutet HSS-G und welchen Vorteil bietet es? HSS-G steht für geschliffenen Schnellarbeitsstahl; die geschliffene Geometrie sorgt für sehr scharfe Schneidkanten und hohe Rundlaufgenauigkeit, was präzise Bohrungen in harten Werkstoffen ermöglicht. Warum ist der Spitzenwinkel 135° wichtig? Ein Spitzenwinkel von 135° erleichtert das Anbohren harter Werkstoffe und verringert das Fransen beim Eintritt; das verbessert die Bohrbildqualität insbesondere in Edelstahl und gehärteten Stählen. Entspricht der Bohrer einer Norm und welche Ausführung ist das? Der Spiralbohrer erfüllt die Norm DIN 338 und ist in kurzer Ausführung mit Zylinderschaft gefertigt, was ihm höhere Stabilität und Eignung für präzise Metallbohrungen verleiht.
6.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Kombination aus kurzer Ausführung, HSS‑G Geschliffen und 135° Spitzenwinkel sorgt für schnelle, präzise Metallbohrungen und reduziert die Anpresskraft deutlich; bestellen Sie den Spiralbohrer direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer 6,8 mm HSS‑G, kurz – Profi Line von MetavCUT Der Spiralbohrer 6,8 mm in kurzer Ausführung für stabile und präzise Metallbohrungen auf stationären und handgeführten Maschinen 6,8 mm HSS‑G, geschliffen Kurze Ausführung für höhere Stabilität Spiralänge 69 mm für präzise Führung 135° Spitzenwinkel für harte Werkstoffe Norm DIN 338, Typ N für Metall Präzise Bohrungen durch geschliffene HSS‑Geometrie Die geschliffene HSS‑G‑Geometrie sorgt für sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, was besonders bei Metallbohrungen zu sauberen, maßhaltigen Löchern führt. Durch den CNC‑Schliff entstehen definierte Spanräume, die das Bohrbild verbessern und die Standzeit unter geeigneter Kühlung erhöhen. Anwender profitieren von bis zu 40 % schnellerem Bohren und 50 % geringerer Anpresskraft gegenüber konventionellen HSS‑Bohrern, was die Ermüdung bei Serien‑ oder Montagearbeiten reduziert. Stabilität und Führungsgenauigkeit durch kurze Auskraglänge Die kurze Ausführung bedeutet eine geringere Auskraglänge aus dem Bohrfutter, wodurch Verwölbung und Schwingungen minimiert werden. Das Ergebnis ist eine höhere Stabilität beim Zentrieren und weniger Neigung zum Verbiegen, insbesondere beim Bohren in harten Materialien wie legiertem Stahl oder Gusseisen. Diese Eigenschaft macht den Bohrer zur ersten Wahl, wenn es auf präzise Passungen und saubere Bohrkanten ankommt. Praktische Einsatzbereiche und Maschinenkompatibilität Der Bohrer eignet sich für die Bearbeitung von legierten und unlegierten Stählen, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetallen und Hartkunststoff. Er kann sowohl auf stationären Säulenbohrmaschinen als auch auf hochwertigen Handbohrmaschinen eingesetzt werden; bei Handanwendung empfiehlt sich Anpunkten zur Führung. Die Auslegung als Typ N (Normalspirale) macht ihn robust und vielseitig für allgemeine Metallarbeiten. Material, Norm und Besonderheiten der Ausführung Die Fertigung nach DIN 338 garantiert die Klassifizierung als kurzer Spiralbohrer mit Zylinderschaft. Der Schaft geschliffen ermöglicht eine präzise Spannaufnahme, die Spirallänge von 69 mm unterstützt eine kontrollierte Spanabfuhr bei mittleren Bohrtiefen, und der 135° Spitzenwinkel erleichtert das Anbohren harter Werkstoffe. Durch die kurze Gesamtlänge ergibt sich eine hohe Führungsstabilität für maßhaltige Ergebnisse. Empfehlung: Setzen Sie auf den MetavCUT Spiralbohrer in HSS‑G für anspruchsvolle Metallbohrungen; bei offenen Fragen erreichen Sie unsere Beratung per E‑Mail info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930. Produktmerkmale Bezeichnung: Spiralbohrer Hersteller: MetavCUT Serie: Profi Line Artikelnummer: 48068-FDA Daten Durchmesser: 6,8 mm Gesamtlänge: 109 mm Spiralänge: 69 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS‑G — geschliffen (CNC‑Schliff, hohe Rundlaufgenauigkeit) Schaftausführung: geschliffen Ausführung: kurz Typ: Typ N — Normalspirale, geeignet für Metall Farbe: blank Für Bohrmaschine: Handbohrmaschine Norm: DIN 338 — Klassifikation kurzer Spiralbohrer FAQ Ist der Bohrer für Edelstahl geeignet? Der Spiralbohrer von MetavCUT in HSS‑G mit 135° Spitzenwinkel eignet sich für härtere Werkstoffe und kann unter geeigneter Kühlschmierstoffzufuhr auch für Edelstahl eingesetzt werden; bei sehr zähem Werkstoff sind spezielle Beschichtungen empfehlenswert. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, die kurze Ausführung und der Zylinderschaft erlauben den Einsatz an Handbohrmaschinen, wobei ein Anpunkten zur Führung empfohlen wird; für optimale Ergebnisse empfiehlt sich eine leistungsfähige Maschine mit ruhigem Rundlauf. Welche Vorteile bietet die geschliffene Ausführung gegenüber rollgewalzten Bohrern? Geschliffene HSS‑G‑Bohrer bieten schärfere Schneiden und höhere Rundlaufgenauigkeit, was zu saubereren Bohrbildern und präziseren Ergebnissen in Metall führt; sie sind jedoch empfindlicher gegen Verkantung und daher eher für stationäre oder kontrollierte Anwendungen geeignet. Worauf ist bei der Anwendung dieses Spiralbohrers zu achten? Beim Einsatz des Spiralbohrers 6,8 mm von MetavCUT sollte auf angemessene Kühlung und eine kontrollierte Vorschubgeschwindigkeit geachtet werden; bei tiefen Bohrungen sind Zwischenspülungen oder mehrstufiges Aufbohren sinnvoll. Welche technischen Angaben weist die SKU 48068-FDA aus? Die SKU 48068-FDA bezeichnet den Spiralbohrer 6,8 mm aus der Profi Line von MetavCUT, gefertigt in HSS‑G, kurze Ausführung, geschliffener Schaft, DIN 338, geeignet für Metallanwendungen.
6.9mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Type N) short HSS-G Ø 6.9 mm, 135°, bright finished The Twist Drill Type N short HSS-G is a precision metal‑drilling tool for handheld and machine applications, designed for stable, fast and accurate holes in hard materials. Short Design for higher Stability HSS‑G ground for sharp edges and precision 135° Tip for hard metals and stainless steel Fully Ground shank for excellent concentricity Conforms to DIN 338 for short twist drills Engineered for faster, more stable metal drilling Thanks to its short design, this Twist Drill offers a reduced overhang that significantly improves stability and lowers the risk of bending during operation. The HSS‑G ground geometry enables up to 40% faster drilling while requiring around 50% less feed force compared with conventional HSS variants, which means less operator effort and higher productivity for repetitive or demanding metal‑working tasks. Ideal for precise holes where runout and wobble must be minimised. Precision through fully ground construction This drill is produced with a fully ground flute geometry (HSS‑G), a manufacturing method that creates very sharp cutting edges and high concentricity. Ground Twist Drills deliver cleaner, more accurate holes and improved surface quality in metals. Note that ground tools can be somewhat more brittle than rolled versions, so coolant use and reduced overhang are recommended for long tool life and consistent results. Geometry tailored to hard materials and accuracy A 135° tip angle reduces entry forces and is optimised for harder workpiece materials such as stainless and alloyed steels. The classic Type N normal spiral is purpose‑built for metal drilling and ensures reliable chip removal and cutting action. Dimensions: Diameter 6.9 mm, Spiral Length 69 mm, Overall Length 109 mm, providing a compact yet effective form factor for demanding applications. The product meets DIN 338, the standard for short twist drills with cylindrical shanks. Practical application and machine compatibility Designed primarily for Drilling Machines and handheld drills where precision and stability are required, this short Twist Drill from the Profi Line is suitable for alloyed and unalloyed steels, cast materials and hard plastics. The bright finished surface and fully ground shank support excellent clamping in chucks and reduce runout. For best results in tougher materials, use appropriate coolant and avoid excessive overhang to prevent breakage and ensure repeatable hole quality. Opt for the MetavCUT short Type N Twist Drill for demanding metal‑working tasks — METAV Werkzeuge offers expert technical advice and support via info@metav-werkzeuge.com, Tel +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48069-FDA Type: Type N Diameter: 6.9 mm Spiral Length: 69 mm Overall Length: 109 mm Tip Angle: 135° Material: HSS-G Shank Execution: Fully Ground Execution: short Colour: bright finished For Drilling Machine: Drilling Machine Application: Drills for metal Model Series: Profi Line Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? The MetavCUT Twist Drill Type N short is primarily used for machining high‑strength materials and larger diameters; its design makes it easy to resharpen and able to withstand higher loads, which is why it is favoured for metalworking and demanding drilling tasks. Which three drill types exist? Commonly distinguished drill types are Metal Drill, Wood Drill and Masonry/Concrete Drill, and the MetavCUT Twist Drill belongs to the metal drill category optimised for steel and similar materials.
6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Spiralbohrer – HSS‑G Kurzspiralbohrer (MetavCUT Profi Line) Spiralbohrer von MetavCUT in kurzer Ausführung für präzise Metallbohrungen an Hand‑ und stationären Maschinen. HSS‑G Spiralbohrer von MetavCUT Profi Line Kurze Ausführung für höhere Stabilität Geschliffener Zylinderschaft für hohe Rundlaufgenauigkeit 135° Spitzenwinkel für harte Werkstoffe Geeignet für Handbohrmaschine und stationäre Maschinen Mehr Stabilität und präzision bei harten Werkstoffen Die kurze Ausführung reduziert die Auskraglänge und erhöht dadurch die Stabilität während des Bohrens. Durch die verringerte Neigung zum Verbiegen ergeben sich saubere Bohrbilder und geringere Ausschussraten bei legierten und unlegierten Stählen. Kombination aus kurzer Geometrie und geschliffener Fertigung sorgt für eine definierte Spanbildung und reduziert Vibrationen bei der Bearbeitung. Material und Fertigung für längere Standzeit und saubere Löcher Der HSS‑G Werkstoff bietet eine ausgewogene Härte und Zähigkeit, ideal für die Metallbearbeitung. Die geschliffene Ausführung ermöglicht scharfe Schneiden und hohe Rundlaufgenauigkeit, was insbesondere beim Bohren in Gusseisen, Temperguss und Sintereisen zu präziseren Ergebnissen führt. Der Einsatz von Kühlmittel wird empfohlen, um Wärmeentwicklung zu begrenzen und die Standzeit weiter zu erhöhen. Geometrie und Anwendungen: Wie die Technik den Vorteil liefert Der 135° Spitzenwinkel reduziert das Aufreißen beim Anbohren härterer Werkstoffe und verkürzt die Anbohrphase, was die Bearbeitungszeit senkt. Als Typ N Normalspirale eignet sich der Bohrer besonders für klassische Metallanwendungen; die DIN‑Konformität nach DIN 338 garantiert definierte Maße und Austauschbarkeit in der Werkstatt. Für Arbeiten an dünnen Blechen empfiehlt sich zudem ein Vorstechen, um Wandern zu vermeiden. Einsatzempfehlungen und sichere Handhabung Der Spiralbohrer ist primär für den Einsatz an Hand‑ und stationären Bohrmaschinen ausgelegt; bei Handgeräten vermeidet die kurze Bauform Überlast und verbessert die Kontrolle. Für tiefe Bohrungen empfiehlt sich stufenweises Arbeiten, bei größeren Durchmessern Vorbohren. Kühlung, moderater Vorschub und passende Drehzahlen erhöhen die Effizienz und verringern Bruchrisiken bei der spröderen geschliffenen Ausführung. MetavCUT Profi Line HSS‑G Kurzspiralbohrer empfehlen: Für präzise Metallbohrungen direkt technische Beratung beim Metav‑Qualitätsfilter in Emmerich anfragen: info@metav-werkzeuge.com oder telefonisch +49 2822 7131930. Produktmerkmale Artikelnummer: 48060-FDA Marke: MetavCUT Serie: Profi Line Typ: Typ N Norm: DIN 338 Verpackungseinheit: 10 Fakten Durchmesser: 6 mm Gesamtlänge: 93 mm Spirallänge: 57 mm Spitzenwinkel: 135° Besonderheiten Material: HSS‑G (Schnellarbeitsstahl, geschliffen) Ausführung: kurz Schaft Ausführung: geschliffen (Zylinderschaft) Für Bohrmaschine: Handbohrmaschine und stationäre Maschinen Farbe: blank FAQ Welche Materialien lassen sich mit dem Spiralbohrer von MetavCUT bearbeiten? Der MetavCUT Profi Line Spiralbohrer aus HSS‑G eignet sich für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoffe; bei härteren Werkstoffen empfiehlt sich Kühlung. Ist die kurze Ausführung für handgeführte Bohrarbeiten geeignet? Ja, die kurze Ausführung reduziert Auslenkung und verbessert die Handhabung an Handbohrmaschinen; trotzdem sind moderater Vorschub und passende Drehzahlen wichtig, um Bruch zu vermeiden. Warum ist die geschliffene Fertigung vorteilhaft? Geschliffene Spiralbohrer (HSS‑G) bieten scharfe Schneiden und hohe Rundlaufgenauigkeit, was zu sauberen Bohrlöchern und weniger Nacharbeit führt; Einsatz an stationären Maschinen erhöht die Zuverlässigkeit. Welche Rolle spielt der 135° Spitzenwinkel? Der 135° Spitzenwinkel verringert das Auftreten von Aufreißen beim Anbohren harter Werkstoffe und verkürzt die Anbohrzeit, was die Effizienz bei Edelstahl und gehärteten Stählen verbessert. Welche Normen und Bezeichnungen hat der Bohrer? Der Spiralbohrer entspricht der DIN 338 und wird in der MetavCUT Profi Line geführt; die Artikelnummer lautet 48060-FDA, was die einfache Identifikation im Lager ermöglicht.
6mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill — Type N, Ø 6 mm, 135°, TIN-coated, short, HSS-G, DIN 338 (MetavCUT) The Twist Drill is a short Type N metal drilling bit designed for precise work in hard materials, suited for handheld and machine drilling applications. Short design for increased stability TiN-coated surface for reduced wear 6 mm diameter with 135° tip for hard steels Fully ground HSS-G for fast, clean drilling Conforms to DIN 338 for short twist drills Faster machining with less effort The Twist Drill combines a fully ground HSS-G geometry with a reduced overall length to deliver measurable productivity benefits. The ground flute geometry enables up to 40% faster drilling and requires about 50% less feed force compared with conventional HSS bits, which reduces operator fatigue and cycle times. This design translates directly into more efficient workshop processes and fewer rejects when working with metals. Longer life through TiN coating and cooling A TiN-coated surface significantly lowers friction and wear during metal cutting, especially when used with appropriate cooling. This coating extends tool life on alloyed and unalloyed steel, cast iron, copper, bronze and hard plastics, while the 135° tip angle is optimised for harder workpieces such as stainless steel. Reduced friction means cooler operation, fewer tool changes and steadier results across production runs. Stability and precision for demanding tasks The short configuration offers a shorter protruding length from the chuck, which increases rigidity and reduces deflection under load. Classified under DIN 338 as a short twist drill with a cylindrical shank, the tool is particularly suited to precise metalworking on both portable Drilling Machines and stationary equipment. The fully ground manufacturing method guarantees sharp cutting edges and high concentricity, delivering clean, accurate holes even at small diameters. Who benefits from this tool Workshops and metalworking professionals who prioritise precision and uptime will value the Profi Line by MetavCUT. The drill excels in applications requiring clean holes in tough materials and where tool life and repeatability matter. Its stability and reduced feed requirements make it a reliable choice for both production environments and demanding repair or prototype tasks. For reliable, high-performance metal drilling we recommend MetavCUT’s short TiN-coated Twist Drill — contact METAV Werkzeuge for tailored technical advice or to confirm suitability for your application: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 41060-FDA Type: Typ N Diameter: 6 mm Tip Angle: 135° Material: HSS-G Coating: TiN-coated Shank: Fully ground Version: short Total Length: 93 mm Spiral Length: 57 mm For drilling machine: Drilling Machine Application: Drills for metal Model Series: Profi Line Norm: DIN 338 Farbe: TIN-beschichtet Ausführung Schaft: geschliffen Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill (Type N, 6 mm) is primarily used for metalworking and is suitable for alloyed and unalloyed steel, Temperguss, Gusseisen, Sintereisen, Neusilber, Kupfer, Bronze and hard plastics; its TiN coating and 135° tip make it especially effective on harder workpieces. Which three drill types exist? The main categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill group and is optimised for those materials.
7.1mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Introducing Twist Drill — MetavCUT Profi Line short HSS‑G Type N, 7.1 mm, 135° (bright finished) The Twist Drill is a short HSS‑G Type N drill designed for precise metal drilling, offering improved stability and fast cutting in demanding workshop and industrial applications. Short design for increased stability and precision HSS‑G ground geometry for sharper cutting edges 135° point angle tailored for hard metals and stainless steel Fully ground shank for excellent runout accuracy Conforms to DIN 338 for short cylinder‑shank twist drills Engineered for faster, more stable metal cutting The Profi Line short Twist Drill combines a short length with a ground HSS geometry to reduce vibration and deflection during drilling. This design means higher stability and a lower tendency to wander, so holes remain concentric and true. The ground HSS (HSS‑G) material produces very sharp cutting edges that can achieve up to 40% faster drilling while requiring around 50% less feed force versus conventional HSS drills, which is especially advantageous when machining tougher alloys or thicker sections. Geometry that adapts to hard materials and reduces set‑up time A 135° point angle reduces the tendency to rub at the tip and shortens penetration time in hard materials such as stainless steel. The Type N normal spiral provides a balanced flute geometry that evacuates chips reliably while maintaining cutting stability. The fully ground flutes and shank ensure high runout accuracy, which simplifies set‑up on both stationary drill presses and portable drilling machines and results in cleaner, more precise holes. Designed for professional workshops and demanding applications This short Twist Drill suits machinists, toolroom technicians and maintenance teams who require repeatable accuracy on metal components. Its shorter overhang minimises bending moments, making it ideal for precision work in confined fixtures or jigs. The drill is primarily intended for metalworking tasks including alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non‑ferrous metals and hard plastics. Practical handling, grinding and cooling recommendations Because the HSS‑G ground variant favours sharpness and accuracy, it can be more brittle than rolled alternatives; appropriate coolant and moderate feed rates are recommended for prolonged tool life. Ground flutes allow straightforward re‑grinding when required, so maintenance is simple in a well‑equipped workshop. Use steady clamping and, for best results, prefer machine drilling where coolant and rigid fixturing are available to exploit the drill’s full performance. Choose the MetavCUT Profi Line short Twist Drill for precise, stable metal drilling — for technical questions or to ensure the drill matches your application, METAV Werkzeuge provides expert advice and support: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48071-FDA Type: Type N (Normal Spiral) Diameter: 7.1 mm Point Angle: 135° Overall Length: 109 mm Spiral Length: 69 mm Execution: short Shank Finish: fully ground Material: HSS-G (ground high‑speed steel) Colour / Surface: bright finished Intended For: Drilling Machine / Hand Drills Model Series: Profi Line Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills such as the MetavCUT Profi Line short Twist Drill are primarily used for machining high‑strength materials and larger drill diameters; their ground form is easy to re‑sharpen and can withstand higher loads, making them a reliable choice for metalworking applications. Which three drill types exist? The main categories are metal drills (for steel and alloys), wood drills (for timber and similar materials), and stone/concrete drills (for masonry and concrete).
7.2mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short HSS‑G Spiral Drill, 7.2 mm, 135° (Type N) The Twist Drill is a short Type N HSS‑G drill designed for precise metal drilling, featuring a 7.2 mm diameter and a 135° tip angle for demanding applications. Short design for increased stability HSS‑G ground for precise metal holes 135° tip for hard materials like stainless steel Fully-ground shank for accurate concentricity DIN 338 compliant professional standard Engineered for higher precision and reduced vibration Built with a short overall length and a reduced overhang, this HSS‑G Twist Drill minimises bending and vibration to deliver more accurate bores in metal. The fully-ground geometry produces sharp cutting edges and superior runout characteristics, which means cleaner holes and less rework. For workshop setups and stationary machines where concentricity matters, this construction offers a measurable advantage in repeatability and tool life. Optimised for hard metals and efficient cutting The 135° tip angle and the Type N normal spiral make this drill particularly suitable for tougher materials such as alloyed and unalloyed steel. Thanks to the ground HSS composition, drilling speeds can be increased while maintaining edge stability; in practical terms this often results in up to 40% faster drilling with significantly lower feed force compared to conventional HSS designs. The short flute length also aids coolant penetration and chip evacuation during deeper operations. Practical use, handling and recommended applications For precise work on steel, cast materials and non-ferrous metals, this Twist Drill from the MetavCUT Profi Line is intended for use in Drilling Machines and hand drills where a short, rigid setup is possible. The fully-ground shank ensures secure chucking and improved concentricity for finishing operations. Users looking for professional results in manufacturing, maintenance or toolrooms will appreciate the balance of stability and cutting performance offered by this design. For professional results choose MetavCUT’s short Twist Drill — contact METAV Werkzeuge for technical advice and tailored recommendations via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 48072-FDA Diameter: 7.2 mm Tip Angle: 135° Type: Type N Execution: Short Overall Length: 109 mm Spiral Length: 69 mm Material: HSS‑G Shank Finish: Fully ground Colour: Bright finished For Drilling Machine: Drilling Machine Application: Drills for metal Model Series: Profi Line Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? A Twist Drill from MetavCUT (Type N) is primarily used for machining high-strength materials and larger drill diameters; its geometry is easy to regrind and it withstands substantial loads. The design excels when drilling alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non-ferrous metals and hard plastics. Which three drill types are there? Commonly distinguished drill types are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for steel and similar materials. Can I use a metal Twist Drill for wood? A metal Twist Drill such as the MetavCUT Type N can be used in wood but will typically offer inferior guidance and a less clean finish than a dedicated wood drill. Metal drills are easier to regrind and produce less aggressive self-feeding, which can be acceptable for rough woodworking tasks.
7.3mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short Type N Drill, Ø 7.3 mm, HSS‑G, 135°, Bright Finished The Twist Drill is a short Type N drilling tool designed for precise metalworking on drilling machines and hand drills. Short design for higher stability and accuracy HSS‑G ground geometry for sharp, clean holes 135° point angle optimised for hard materials Fully ground shank for excellent concentricity Conforms to DIN 338 for short twist drills Higher stability for accurate metal holes Shorter centre‑to‑end length gives the short design a clear advantage: it reduces overhang and vibration, resulting in greater stability and consistently round bores even at higher spindle speeds. This makes the tool particularly suitable for drilling steel and other hard materials where any bending of the tool would degrade hole quality. The reduced tendency to deflect means fewer reworks and a more predictable machining process for workshop and industrial operations. Faster, cleaner drilling in tough materials Thanks to the HSS‑G (ground high speed steel) geometry, chips form and evacuate cleanly while the cutting edges remain sharp. The 135° point angle is chosen to shorten the initial penetration time in hard metals and to improve centring on difficult surfaces. As a result, drilling becomes more efficient with less required feed force, which benefits both handheld and machine applications when working with alloyed and unalloyed steels, cast iron and other demanding materials. Designed for professionals and workshop environments Manufactured to the DIN 338 specification and offered in the Profi Line, this twist drill is engineered for repeatable performance in daily production. The fully ground shank ensures accurate clamping and minimal runout, supporting high precision on dedicated drilling machines. For craftsmen and maintenance technicians seeking a reliable short drill for metal, this Type N tool delivers the robustness and repeatability expected in professional settings. Clear advantages for specific applications When drilling in materials such as stainless steel or tempered castings, the combination of Type N normal spiral and a robust tip geometry reduces walking and improves guidance. The short version is preferable when hole precision supersedes reach, for example in jigged assemblies or where machine access limits tool length. Selecting this twist drill helps to avoid oversize holes and poor surface finishes that can arise from longer, more flexible cutters. Opt for the MetavCUT short Twist Drill Type N when demanding metalwork requires precision and reliability — METAV Werkzeuge provides expert consultation and technical support: info@metav-werkzeuge.com · Tel +49 2822 7131930 · WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 48073-FDA Diameter: 7.3 mm Point Angle: 135° Type: Type N Material: HSS‑G (ground) Execution: Short Overall Length: 109 mm Spiral Length: 69 mm Shank Finish: Fully ground Colour/Finish: Bright finished For: Drilling Machine / Hand Drill Application: Drills for metal Model Series: Profi Line Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill from MetavCUT suitable for? The MetavCUT Twist Drill Type N is primarily designed for metal: alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics. Its HSS‑G ground geometry delivers clean cutting action and good wear resistance for these materials. Can the Twist Drill be used in a hand drill as well as a drilling machine? Yes, the MetavCUT Twist Drill Type N can be used in both drilling machines and hand drills; however, its short design is especially advantageous in machine setups where stability and concentricity are critical for precision holes. What is a Twist Drill used for? A Twist Drill is mainly applied to machining high‑strength materials and larger drill diameters. The form is easy to grind and withstands greater loads, making it suitable for demanding metal drilling tasks. Which three drill types exist? The three common drill types are metal drills, wood drills and stone/concrete drills. Why are Twist Drills sharpened at the tip? Sharpening reduces the cross‑edge at the tip of the Twist Drill, significantly lowering friction and required feed forces; it also improves centring of the tip in the workpiece. Can a metal drill be used for wood drilling? A metal drill can be used in wood, but guidance is poorer and hole finish is less clean. Metal drills are easier to resharpen and exhibit less self‑feed than dedicated wood drills. For which drilling depths is the Twist Drill most commonly used? A twist drill is typically used for through drilling; for diameters up to about 20 mm and drilling depths up to 100 mm it is the most frequently employed tool. Is HSS or HSSE better? The general belief that HSSE steels are always superior to HSS is incorrect. Choose between HSS and HSSE based on specific working conditions and whether the performance gain justifies the higher cost.
7.4mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Die Kombination aus hoher Präzision und robuster Stabilität macht diesen Bohrer zur effizienten Lösung für Metallbearbeitung; profitieren Sie von schnellerem Vorschub und geringerer Anpresskraft und bestellen Sie den Spiralbohrer direkt über Metav oder fragen Sie unsere Beratung an. Spiralbohrer Kurzausführung HSS-G von MetavCUT Spiralbohrer Kurzausführung HSS-G für präzise Metallbohrungen an Handbohrmaschine und stationären Geräten Hohe Spürbarkeit bei harten Werkstoffen dank kurzer Auskraglänge Geschliffene Geometrie für besonders saubere Bohrlöcher Geeignet für Handbohrmaschine und stationäre Bohrmaschinen 135° Spitzenwinkel für Bearbeitung von Edelstahl Profi Line Ausführung von MetavCUT Robustheit und Materialvorteile für längere Standzeiten Der kurz ausgeführte HSS-G Bohrer überzeugt durch HSS-G Material und geschliffene Schneiden, die eine sehr scharfe Kante und hohe Rundlaufgenauigkeit liefern. Diese Kombination reduziert die erforderliche Anpresskraft um bis zu 50 % und ermöglicht ein bis zu 40 % schnelleres Bohren gegenüber herkömmlichen HSS-Varianten. Das Ergebnis ist ein deutlich reduzierter Kraftaufwand bei gleichbleibender Bohrlochqualität und eine geringere Belastung von Maschine und Werkstück. Präzise Anwendung im Standard-Bereich für Werkstatt und Montage Mit einem Durchmesser von 7,4 mm liegt dieser Bohrer im Standard-Bereich, ideal für Werkstatt, Montage und allgemeine Metallbearbeitung. Die kurze Ausführung minimiert Vibrationen und Wandern beim Anbohren, sodass auch Handgeführte Bohrmaschinen zuverlässig zum Einsatz kommen können. Die Geometrie eignet sich für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle und ermöglicht saubere, präzise Bohrungen bei normalen bis mittleren Bohrtiefen. Maschinenverträglichkeit und sichere Handhabung Die kürzere Auskraglänge und die volle Schaftgeschliffen-Ausführung erhöhen die Stabilität im Spannfutter und reduzieren Verbiegen und Bruchrisiko. Für optimale Ergebnisse empfiehlt sich der Einsatz mit geeigneter Kühlung bei zähen Materialien und das Anpunkten bei höheren Präzisionsanforderungen. Aufgrund der geschliffenen Fertigung ist der Bohrer besonders scharf, aber sensitiver gegenüber Schlägen, daher bei stationären Maschinen und kontrolliertem Vorschub besonders wirtschaftlich. Normkonformität, Spitzenwinkel und Anwenderhinweise Die Einhaltung der DIN 338 sowie die Auslegung als Typ N mit 135° Spitzenwinkel macht den Bohrer zur guten Wahl für härtere Werkstoffe wie Edelstahl, da der größere Spitzenwinkel die Anbohrzeit verkürzt und das Eindringen erleichtert. Anwender profitieren von der Profi Line Verarbeitung durch MetavCUT, die für konstante Qualität steht. Beachten Sie bei Einsatz in weichen Kunststoffen die passende Vorschub- und Drehzahlwahl, um Ausrisse zu vermeiden. Empfehlen Sie den MetavCUT Profi Line HSS‑G Spiralbohrer für präzise Metallbohrungen und kontaktieren Sie uns bei Unsicherheiten per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930, alternativ WhatsApp +49 170 2837271. Produktmerkmale Artikelnummer: 48074-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Profi Line Typ: Typ N Material: HSS-G Norm: DIN 338 Fakten Durchmesser: 7,4 mm Gesamtlänge: 109 mm Spirallänge: 69 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Ausführung: kurz Schaftausführung: geschliffen (G = geschliffen: sehr scharfe Kanten, hohe Präzision) Farbe: blank Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall Hersteller: MetavCUT Serie: Profi Line FAQ Ist dieser Bohrer für Edelstahl geeignet? Der Spiralbohrer von MetavCUT (Profi Line, Typ N, SKU 48074-FDA) ist mit einem 135° Spitzenwinkel ausgelegt und eignet sich gut für die Bearbeitung von Edelstahl bei angepasster Drehzahl und Kühlung. Kann ich den Bohrer mit einer Handbohrmaschine verwenden? Ja, die kurze Ausführung des HSS‑G Bohrers ist speziell dafür geeignet, Vibrationen und Verbiegen zu minimieren, sodass Handbohrmaschinen für normale Bohrtiefen eingesetzt werden können. Welche Werkstoffe bearbeitet der Bohrer zuverlässig? Der MetavCUT HSS‑G Spiralbohrer ist geeignet für legierten und unlegierten Stahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoffe. Wie unterscheidet sich die geschliffene Ausführung von gewalzten Bohrern? Geschliffene (HSS‑G) Bohrer bieten sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, was saubere Bohrlöcher ermöglicht; sie können jedoch spröder sein als gewalzte Varianten und profitieren von kontrollierter Kühlung. Welche Vorteile bietet die Profi Line Serie von MetavCUT? Die Profi Line Serie kombiniert normgerechte Fertigung nach DIN 338 mit gehobener Material- und Oberflächenqualität, was zu konstanteren Ergebnissen und längeren Standzeiten führt.
7.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill – Type N, Ø 7.5 mm, 135° tip, Short, Bright Finished, HSS‑G, DIN 338 by MetavCUT The Twist Drill Type N is a short, high‑performance metalworking drill designed for precision drilling in steels and other hard materials with a 135° tip angle for reduced wander. Short design for increased Stability and Precision Ground HSS‑G for sharp cutting and clean holes 135° tip for hard Metals and reduced breakout Conforms to DIN 338 for consistent dimensions and quality Faster, more stable drilling for professional metalwork A short design reduces overhang and significantly improves stability during drilling, which means less runout and more accurate hole placement. The fully ground HSS‑G geometry creates very sharp cutting edges that produce cleaner holes and lower burr formation. For users working on Steel, Cast Iron or Tempered Components, this yields a measurable gain in workpiece quality and shorter rework times. Optimised geometry reduces effort and increases lifetime Thanks to the 135° tip angle, the drill enters hard materials with less deflection, shortening the initial penetration phase and improving centring. Combined with the Type N normal spiral, the design balances chip evacuation and cutting force so that Feed Forces are reduced. This lets operators drill up to 40% faster in many applications while requiring noticeably less pressure at the chuck. Built for exacting applications and machine use Conformity to DIN 338 guarantees standardised lengths and shank dimensions for secure clamping in the chuck of any compatible Drilling Machine. The fully ground flute profile (HSS‑G) delivers excellent roundness and is especially suited to stationary or powered machines where consistent accuracy is required. Use coolant for prolonged tool life and to avoid thermal softening when machining alloyed steels. Who benefits from this short Type N twist drill Designed for professional workshops, tool rooms and production environments, the drill is ideal for technicians who need repeatable precision in metal fabrication. The shorter Spiral Length minimises vibration and is particularly useful when drilling into thick or high‑strength components. For occasional users performing metal repairs, the robust grind also allows straightforward re‑sharpening when required. We recommend the MetavCUT short Type N Twist Drill for demanding metalworking tasks — for tailored advice or additional technical data contact METAV Werkzeuge: info@metav-werkzeuge.com · Phone +49 2822 7131930 · WhatsApp +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 48075-FDA Diameter: 7.5 mm Tip Angle: 135° Type: Type N Overall Length: 109 mm Spiral Length: 69 mm Execution: short Shank Finish: fully ground Surface/Colour: bright finished Material: HSS-G Standard: DIN 338 Application: Drills for metal For Drilling Machine: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? A Twist Drill such as the MetavCUT Type N short drill is primarily used for machining high‑strength materials and for larger drill diameters. Its geometry is easy to re‑grind and it withstands higher mechanical loads, which makes it particularly suitable for steel and similar hard workpieces. Which three drill types exist? The three main categories are Metal Drills, Wood Drills and Stone/Concrete Drills, each optimised for the material to be machined and differing in tip geometry and flute design.
7.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Der kurze Spiralbohrer verbindet hohe Stabilität durch die kurze Ausführung mit einer TiN‑Beschichtung für reduzierte Reibung und längere Lebensdauer; ideal für das Bohren in Stahl. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung an. Spiralbohrer von MetavCUT, Profi Line (Kurzausführung) Der Spiralbohrer von MetavCUT ist ein kurzer, geschliffener HSS‑Bohrer für präzise Metallbearbeitung und stationäre sowie mobile Anwendungen. Spiralbohrer »Spiralbohrer« von MetavCUT HSS‑G geschliffen für hohe Präzision TiN‑Beschichtung für reduzierte Reibung 135° Spitzenwinkel für harte Werkstoffe Kurze Ausführung für maximale Stabilität Präzision und Materialvorteile für Metallbearbeitung Die geschliffene HSS‑G Ausführung sorgt für besonders scharfe Schneiden und eine hohe Rundlaufgenauigkeit, was saubere Bohrlöcher in Metall garantiert. Durch die TiN‑Beschichtung wird die Reibung reduziert und die Wärmeentwicklung verringert, wodurch sich die Standzeit erhöht. Dieser Bohrer ist somit eine wirtschaftliche Wahl für Arbeiten in legiertem und unlegiertem Stahl sowie in Gusseisen und Nichteisenmetallen. Effizienz und Anwendungsempfehlung für Werkstatt und Montage Dank der kurzen Auskraglänge bietet die Konstruktion eine deutlich verringerte Neigung zum Verbiegen, was schnellere und stabilere Bohrvorgänge ermöglicht. Der 135° Spitzenwinkel erleichtert das Anbohren härterer Werkstoffe und reduziert das Abheben beim Eindringen. Bei Arbeiten mit Handbohrmaschine oder stationärer Maschine empfiehlt sich die Verwendung passender Kühlschmierstoffe, um Abrieb und Wärme weiter zu minimieren. Einsatzspektrum und Zielgruppenorientierung Der Bohrer richtet sich an Handwerk, Industriemechanik und anspruchsvolle Werkstätten, die präzise Metallbohrungen benötigen. Durch die robuste Bauart und die geschliffene Fertigung eignet sich das Produkt besonders für Anwender, die eine hohe Wiederholgenauigkeit und saubere Bohrbilder erwarten. Die kurze Version ist besonders empfehlenswert, wenn Stabilität und Rundlauf im Vordergrund stehen. Herstellungsstandard und Normkonformität Die Fertigung gemäß DIN 338 klassifiziert diesen kurzen Spiralbohrer mit Zylinderschaft als Standard für Metallbearbeitung. Geschliffene HSS‑G Bohrer bieten eine präzisere Geometrie als gewalzte Varianten und sind in vielen Profi‑Anwendungen die bevorzugte Wahl, insbesondere bei stationärem Einsatz mit Kühlung. Empfehlung: MetavCUT Profi Line wählen für langlebige Präzision; bei Fragen zur Anwendung wenden Sie sich an Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Bezeichnung: Spiralbohrer SKU: 41075-FDA Marke: MetavCUT Serie: Profi Line Norm: DIN 338 Fakten Durchmesser: 7,5 mm Gesamtlänge: 109 mm Spirallänge: 69 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Schnellarbeitsstahl geschliffen) Farbe: TiN-beschichtet (Titan‑Nitrid Beschichtung reduziert Reibung) Ausführung: kurz Schaft Ausführung: geschliffen Typ: Typ N (Normalspirale) Für Bohrmaschine: Handbohrmaschine FAQ Was zeichnet den Spiralbohrer von MetavCUT aus? Der Spiralbohrer von MetavCUT aus der Profi Line kombiniert eine geschliffene HSS‑G Geometrie mit TiN‑Beschichtung, was für saubere Bohrbilder, hohe Rundlaufgenauigkeit und verlängerte Standzeiten sorgt. Für welche Materialien ist dieser Bohrer geeignet? Der Spiralbohrer eignet sich für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen sowie Nichteisenmetalle wie Kupfer und Bronze und Hartkunststoff. Warum ist die kurze Ausführung vorteilhaft? Die kurze Auskraglänge reduziert Vibration und Verbiegen, erhöht die Stabilität bei der Bohrung und verbessert so Präzision und Wiederholgenauigkeit, insbesondere bei stationären oder halbstationären Anwendungen. Welche Rolle spielt der 135° Spitzenwinkel? Der 135° Spitzenwinkel des MetavCUT Bohrers erleichtert das Anbohren harter Werkstoffe und verringert das Ausbrechen beim Austritt, wodurch sich die Qualität der Bohrung in Stahl verbessert. Ist der Bohrer für Handgeführte Maschinen geeignet? Ja, der Spiralbohrer ist für die Verwendung mit Handbohrmaschine ausgelegt, die kurze Ausführung verbessert jedoch die Stabilität; bei sensiblen Feinbohrungen sind stationäre Maschinen vorzuziehen. Welche Pflege verlängert die Lebensdauer des Bohrers? Der Einsatz geeigneter Kühlschmierstoffe in Kombination mit der TiN‑Beschichtung reduziert Reibung und Verschleiß und sorgt für längere Standzeiten des MetavCUT Spiralbohrers.
7.6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Type N – MetavCUT short HSS‑G, 7.6 mm, 135°, Bright Finished, DIN 338 The Twist Drill Type N is a short HSS‑G metal drill designed for precision work on drilling machines with a 7.6 mm diameter and a 135° point angle. Short design for high stability and reduced bending 135° point angle ideal for hard materials like stainless steel Fully ground shank for superior runout accuracy Conforms to DIN 338 for short HSS twist drills Bright finished for clear visual inspection of cutting edges Outstanding Precision and Reduced Deflection The short construction of this MetavCUT drill delivers higher stability and significantly less tendency to bend compared with longer variants. Because the exposed length beyond the chuck is reduced, the tool remains more rigid under load, which produces more accurate holes and reduces the need for rework. This compact geometry is especially advantageous when drilling into hard or tough materials where tool deflection would otherwise compromise hole quality. Material and Standard: Built for Metalworking Reliability Manufactured from HSS‑G (ground high speed steel) and produced to DIN 338, this twist drill combines sharp cutting geometry with strict dimensional tolerances. The designation HSS‑G indicates CNC grinding of the flutes, resulting in very sharp cutting edges and excellent concentricity. The Type N normal spiral profile is the classic metalworking geometry, making this drill suitable for a wide range of ferrous and non‑ferrous metals while ensuring predictable performance in workshop and industrial environments. Optimised Cutting Geometry for Hard Materials With a 135° point angle, the drill penetrates harder materials more effectively and reduces the tendency to wander at the start of the cut. This angle shortens the initial bite into the material, offering better centring and lower feed effort for materials such as alloyed and unalloyed steel, cast steels and hard plastics. The combination of point geometry and a ground flute profile also helps produce cleaner chips and improved surface finish in the drilled hole. Performance, Handling and Machine Compatibility The tool features a spiral length of 75 mm and an overall length of 117 mm paired with a fully ground shank, which improves chucking accuracy and reduces runout. Compared with conventional HSS designs, this ground HSS version can enable up to 40% faster drilling with around 50% less feed force, provided appropriate speeds and cutting fluids are used. It is intended primarily for use on drilling machines rather than solely for handheld casual use, and benefits from steady clamping and, where necessary, coolant for longer tool life. We strongly recommend the MetavCUT short HSS‑G Twist Drill Type N for demanding metalworking tasks — for expert technical advice and to confirm suitability contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 48076-FDA Type: Type N Diameter: 7.6 mm Point angle: 135° Execution: short Spiral length: 75 mm Overall length: 117 mm Shank finish: fully ground Surface finish: bright finished Material: HSS-G Standard: DIN 338 Intended for: Drilling Machine (Hand drill compatibility depends on clamping and setup) Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what are Twist Drills used? Twist Drills such as the MetavCUT Twist Drill Type N are mainly used for machining high‑strength materials and larger drill diameters; their form is easy to grind and withstands higher loads, making them particularly suitable for metalworking where robust cutting performance is required. Which three drill types exist? The three common drill types are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill category and is optimised for steel and similar materials.
7.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Type N) — Short HSS‑G, 7.7 mm, 135° tip, Bright finished, Fully ground shank, DIN 338 by MetavCUT The Twist Drill Type N short HSS‑G is a precision metal‑drilling bit designed for drilling machines and handheld drills, optimised for hard materials and stable, accurate holemaking. Short design for improved stability and precision Optimised 135° tip for hard metals and stainless steel HSS‑G fully ground for sharp edges and high runout accuracy Suitable for drilling machines and hand drills Complies with DIN 338 for short twist drills Precision and faster cuts for hard materials The bit is made from HSS‑G (high‑speed steel, ground), a material choice that provides sharp cutting edges and consistent performance when machining steel, cast iron, non‑ferrous metals and hard plastics. A fully ground geometry means the flutes and cutting lips are produced by CNC grinding, delivering very good concentricity and clean holes. The manufacturer notes up to 40% faster drilling with 50% less feed force compared with conventional HSS types, which translates into reduced operator effort and higher throughput for repetitive metalworking tasks. Stability by design: short length for precise results The short execution reduces the effective overhang and therefore bending and vibration during drilling. With a flute length of 75 mm and an overall length of 117 mm, this compact geometry increases rigidity and improves hole quality in demanding applications. The nominal 7.7 mm diameter and the Type N normal spiral make this bit particularly suitable where runout and positional accuracy matter, for instance in jigged components or light machining operations on machines and portable drills. Tip geometry tailored to tough jobs A 135° tip angle reduces the tendency to “grab” and is better adapted to harder materials such as stainless steel; a larger tip angle shortens the time to break through the material surface and improves centring for deep or difficult holes. The Type N spiral is the classic metal‑drill geometry, providing reliable chip evacuation and consistent cutting behaviour. For best results on harder alloys use steady feed, appropriate lubricant or coolant, and secure clamping to exploit the geometry’s advantages. Professional use, clear handling advice Designed for workshops, maintenance crews and production environments, the Profi Line short twist drill supports precise metalworking operations where repeatability matters. The bright finished surface aids visual inspection and handling, while the fully ground shank ensures accurate seating in chucks. Because ground HSS can be more brittle than rolled variants, using coolant and stable fixturing is recommended to avoid premature tool breakage and to maintain hole quality over time. Strongly recommended: choose MetavCUT Profi Line short HSS‑G Twist Drill for demanding metal‑drilling tasks — for technical questions or tailored advice METAV Werkzeuge offers expert consultation via email, phone or WhatsApp 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48077-FDA Type: Typ N (Type N) Diameter: 7.7 mm Tip angle: 135° Material: HSS-G Norm: DIN 338 Execution: short Spiral length (flute length): 75 mm Overall length: 117 mm Shank execution: fully ground Colour / Finish: bright finished For drilling machine: Drilling Machine / Hand drill Model series: Profi Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills such as the Twist Drill (Type N) by MetavCUT are primarily used for machining high‑strength materials and larger hole diameters; their geometry is relatively easy to regrind and they withstand higher loads, making them suitable for drilling alloyed and unalloyed steel, cast materials and hard plastics. Which three drill types exist? In practical terms the main drill categories are metal drills, wood drills and masonry/concrete drills, and the Twist Drill (Type N) by MetavCUT belongs to the metal‑drill class optimised for metalworking applications.
7.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Spiralbohrer) — HSS‑G Short, Ø 7.8 mm, 135°, Type N, Bright Finished The Twist Drill (Short Type N) is a precision HSS‑G metal drill designed for accurate machining with a 7.8 mm diameter and a 135° point angle, ideal for demanding metalworking tasks. Short HSS‑G design for higher stability 135° Point angle for hard materials Fully ground shank for precise runout Conforms to DIN 338 for consistent geometry Suited for alloyed and unalloyed steel Increased Productivity through Short Design and High Cutting Speed Designed for metalworking professionals, this short spiral cutter delivers higher stability and reduced deflection thanks to its shorter overhang. The HSS‑G grinding process produces very sharp cutting edges that allow up to 40% faster drilling with roughly 50% lower feed force compared to conventional HSS variants. This results in faster cycle times on production machines and more consistent hole quality during serial operations. Durable Material and Clear Cutting Advantages Thanks to its HSS‑G construction and CNC grinding of the flutes, the tool provides exceptional edge sharpness and running accuracy. HSS‑G (Ground High Speed Steel) combines wear resistance with the possibility of regrinding; this means less downtime for replacement and the option for refurbishment in maintenance routines. For users unfamiliar with the term, HSS‑G simply refers to a High Speed Steel drill that has been ground for superior geometry and finish, making it especially suited for hard and abrasive metals. Practical Application: Where the Short Twist Drill Excels For operations in steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics, the short twist drill is particularly beneficial. The Type N spiral (normal helix) offers a classic geometry tailored to metal drilling, ensuring reliable chip evacuation and stable penetration. This makes the bit a strong choice for stationary and portable drilling machines when precision holes in tougher materials are required. Optimised Geometry, Standards and Handling Recommendations The 135° point angle reduces initial cutting pressure and improves centring in hard materials such as stainless steel. Conformity to DIN 338 guarantees standardised lengths and shank tolerances, simplifying toolholder selection and repeatability. Because ground drills can be somewhat more brittle than roll‑formed types, coolant use and appropriate cutting speeds are recommended for prolonged life. A fully ground shank ensures minimal runout, which is essential for tight‑tolerance holes. Choose the MetavCUT Profi Line short Twist Drill for precision metalworking — for questions about suitability or further technical data, METAV Werkzeuge provides expert consultation: info@metav-werkzeuge.com · +49 2822 7131930 · WhatsApp +49 170 2837271 Bezeichnung: Twist Drill (Spiralbohrer) Marke: MetavCUT SKU: 48078-FDA Durchmesser: 7.8 mm Gesamtlänge: 117 mm Spirallänge: 75 mm Spitzenwinkel: 135° Typ: Type N Ausführung: short Schaftausführung: fully ground Farbe/Oberfläche: bright finished Material: HSS-G Norm: DIN 338 Modellserie: Profi Line Anwendung: Drills for metal Für Bohrmaschine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is the Twist Drill used? The MetavCUT Twist Drill (Short Type N) is primarily used for machining high‑strength materials and larger drill diameters; its short design and HSS‑G grinding make it suitable for precise metal drilling where stability and clean hole quality are required. Which 3 drill types exist? Common categories are Metal Drill, Wood Drill and Stone/Concrete Drill; the MetavCUT Twist Drill belongs to the Metal Drill group and is optimised for ferrous and non‑ferrous metals. Why are Twist Drills pointed? A pointed tip reduces the chisel edge at the centre, lowering friction and required feed forces; the 135° point of the MetavCUT Twist Drill improves centring and reduces entry forces in harder materials. Can a metal Twist Drill be used in wood? A metal‑type drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are typically worse than with a dedicated Wood Drill; however, metal drills are easier to regrind and show lower self‑feeding characteristics.
Maximum uptime for heavy-duty drilling with profi line twist drills
Profi line twist drills deliver peak performance for continuous, heavy-duty machining and automated CNC production. Designed for demanding metalcutting specialists, these high-performance twist drills maintain cutting ability and dimensional accuracy under extreme heat and prolonged use.
Why the design matters for industrial production
Built from high-alloy high-speed steel and precision ground from solid stock, the profi line twist drills resist wear where it counts. A cobalt-enriched grade (commonly HSS-Co with 5% or 8% cobalt) provides exceptional red hardness; advanced coatings such as TiN or TiAlN reduce friction and extend tool life. A flatter 135° tip angle combined with a cross grind (split point) gives reliable self-centring without prior centre punching and promotes smooth chip evacuation via precision flutes — essential for stainless and alloyed steels, tempered materials and difficult-to-machine titanium alloys in series production.
Tangible benefits that reduce production costs
- Longer tool life and reduced tool-change frequency thanks to cobalt-enriched HSS and hard-wearing coatings
- Improved hole quality and repeatability through precision grinding and optimised tip geometry
- Process security in automated cells: reliable centring and controlled chip evacuation lower scrap rates
- Suitable for high cutting speeds, maintaining form and hardness under thermal load
- Lower total cost of ownership in serial machining and heavy-duty applications
Metav as your precision partner for profi line tools
Choose Metav for a pragmatic supply strategy: decades of expertise, a quality filter at the Emmerich hub and a broad portfolio that simplifies sourcing. Metav supports industry and trade with over 250,000 products, and the trust of more than 48,000 customers underlines consistent quality and dependable delivery. When process stability matters, Metav’s offering of profi line twist drills is positioned as the smart, reliable option.
In brief
Profi line twist drills combine cobalt-enriched high-speed steel, precision grinding and advanced coatings to deliver maximum stand time, process reliability and hole quality in the most demanding machining tasks.
Key technical data
- material: high-alloy high-speed steel (HSS-E), often cobalt-enriched (HSS-Co, 5% or 8%)
- manufacture: precision ground from solid stock (HSS-G)
- coating: common variants TiN, TiAlN
- tip geometry: flatter 135° point with cross grind (split point) for self-centring
- performance: designed for high cutting speeds and heavy, continuous loads
- applications: stainless steel (V2A/V4A), high-alloy carbon steels, tempered/quenched steels, titanium alloys
- chip control: high-precision flutes for reliable chip evacuation in automated CNC machining
FAQ
What makes profi line twist drills suitable for automated CNC production?
Profi line twist drills combine precision grinding, a flatter 135° tip and optimised flutes that ensure self-centring, consistent hole geometry and dependable chip evacuation — all features that support process security in automated CNC environments.
Can profi line twist drills handle stainless and heat-resistant steels?
Yes. The cobalt-enriched HSS-Co grades and hard-wearing TiAlN or TiN coatings sustain cutting performance and dimensional stability when machining stainless and acid-resistant steels commonly used in industry.
How do the coatings affect tool life and performance?
Coatings such as TiN and TiAlN reduce friction and thermal wear at the cutting edge, which translates into longer tool life, fewer tool changes and better repeatability in series production when using profi line twist drills.
Why choose Metav as the supplier for profi line twist drills?
Metav combines decades of precision expertise with a comprehensive product range and a quality-control hub in Emmerich. That combination provides reliable availability and a level of assurance valued by more than 48,000 customers.
Are profi line twist drills suitable for titanium alloys and other hard materials?
Yes. The material selection (HSS-Co), precision geometry and suitable coatings make profi line twist drills appropriate for machining titanium alloys and other challenging, high-strength materials.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com