Precision HSS-G twist drills for reliable metalworking performance
HSS-G twist drills to DIN 338, type N, short and ground, deliver versatile drilling performance for industry and workshop use by offering excellent run-out accuracy and razor-sharp cutting edges that support consistent hole quality; they are ideal for drilling unalloyed and low-alloy steels, cast iron and non-ferrous metals. The precision-ground profile from hardened high-speed steel ensures smooth chip evacuation in the flutes and a low-friction uncoated finish helps prevent chip adhesion in materials such as soft aluminium. A flatter 135° point with split point geometry promotes self‑centring and reduces the need for centre‑punching while lowering feed force, making these drills a dependable choice for maintenance and series production.
5.1mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N short HSS‑G metal drill, Ø 5.1 mm, 135° The Twist Drill Type N is a short HSS‑G metal drill designed for precise machining with a Drilling Machine or hand drill, ideal for demanding work in alloyed and unalloyed steels. Short Type N design for stable drilling in metal HSS‑G ground for up to 40% faster cutting 135° tip angle for harder materials and stainless steel Fully ground shank for secure clamping and concentricity Manufactured to DIN 338 for short twist drills Faster machining with less force for higher throughput Deriving from the ground high‑speed steel grade, the HSS‑G construction reduces required feed force by up to 50% and enables up to 40% faster drilling compared with conventional HSS drills. This translates into shorter cycle times and lower operator effort when working on Steel, Cast Iron or Non‑Ferrous Metals. The Type N normal spiral gives reliable chip evacuation in metalworking, so single‑pass holes are achieved more consistently and with fewer reworks. Short length and exact guidance increase accuracy The short overall design governed by DIN 338 improves rigidity and reduces deflection compared with longer drills. A shorter projection from the chuck increases concentricity and lowers the risk of breakage when drilling deeper into solid Metal. The fully ground shank ensures secure clamping in standard chucks, promoting exact hole positions and repeatable results even at higher spindle speeds. Tip geometry and grind deliver better centring and less friction With a 135° tip angle, this short Twist Drill penetrates harder materials more effectively and reduces chipping on entry. The point geometry lowers the size of the cross‑edge, which means friction during the initial cut is reduced and less axial force is necessary; this helps centring and minimises tool wander on curved or plated surfaces. Ground drills are also easier to re‑sharpen, maintaining cutting performance over multiple sharpening cycles. Built for metalworkers and workshop environments Presented in the Basic Line by MetavCUT, this short Type N twist drill is targeted at professional workshops and demanding hobbyists who require durable, high‑precision tooling for Metal applications. The bright finished surface aids visual inspection of the cutting edges, while the combination of material and geometry makes this product suitable for stationary and portable Drilling Machines. METAV Werkzeuge provides competent advice if additional technical data or selection support is required. We recommend the MetavCUT Twist Drill for precision metalworking — for personalised technical advice or to confirm suitability contact METAV Werkzeuge by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271. Designation: Twist Drill Brand: MetavCUT SKU: 27051-FDA Diameter: 5.1 mm Tip Angle: 135° Type: Type N Material: HSS-G Execution: short Spiral Length: 52 mm Overall Length: 86 mm Shank Execution: fully ground Colour: bright finished Application: Drills for metal / For Drilling Machine Model Series: Basic Line Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill best used for and which materials suit it? The MetavCUT Twist Drill Type N is primarily used for metalworking and is especially suited to alloyed and unalloyed Steel, Cast Iron, Sintered Iron and Non‑Ferrous Metals. Its HSS‑G ground construction and 135° point make it effective for harder materials and industrial drilling tasks. Which three drill types are commonly available? The main categories of drills are Metal drills, Wood drills and Masonry/Concrete drills. The MetavCUT Twist Drill falls into the Metal drill category and is optimised for those applications. Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – wir stehen Ihnen gerne zur Verfügung. 📧 eMail: info@metav-werkzeuge.com ☎️ Telefon: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271
5.2mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Type N — 5.2 mm, 135°, HSS‑G, short, bright finished, DIN 338 (MetavCUT) The Twist Drill Type N is a short HSS‑G metal drilling bit designed for stable, precise drilling in hard materials and for use in drilling machines and hand drills. Short HSS‑G bit for stable, precise drilling 135° point angle for harder materials Fully ground shank for accurate centring Conforms to DIN 338 for short twist drills Spiral length 52 mm with total length 86 mm High‑efficiency HSS‑G performance for tough metals This short HSS‑G Twist Drill delivers a measurable increase in drilling speed and reduced thrust compared with conventional HSS bits. Because the substrate is ground and optimised for harder alloys, the 135° point angle is particularly effective when working with stainless steel and other high‑strength materials. The result is less heat build‑up and a lower risk of workpiece deformation, which translates into consistent hole quality and longer tool life. The Type N geometry preserves chip evacuation while maintaining sufficient cutting edge strength. Short design for greater stability and precise results A short design as defined by DIN 338 reduces overhang and therefore minimises deflection during machining. With a spiral length of 52 mm and a total length of 86 mm, this configuration improves concentricity and repeatability when used in fixed drilling machines or handheld drills. The fully ground shank ensures secure clamping and accurate centring in the chuck, lowering the chance of wobble and producing cleaner bores even in demanding metalworking tasks. Tailored for metalworkers and maintenance professionals Engineered for metal applications, this Type N bit is suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. Workshops, mechanical maintenance teams and precision fabricators benefit from the combination of robust HSS‑G material and the short, stable geometry. The focused design reduces rework and improves throughput in serial operations while the familiar twist geometry keeps the tool simple to handle and resharpen. Practical guidance and the advantage of the 135° point The 135° point angle increases the contact area at the tip and reduces the likelihood of walking on curved or hardened surfaces. Sharpening and the specific point geometry lower friction and, consequently, the required feed forces. For best results, match cutting speeds and feeds to the workpiece material and use appropriate coolant when machining stainless or high‑alloy steels. This approach extends service life and maintains hole accuracy over multiple cycles. Strong recommendation: the MetavCUT Twist Drill Type N with HSS‑G construction is ideal for demanding metal drilling tasks — for technical advice or support contact METAV Werkzeuge via eMail info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill 5.2 mm Type N Brand: MetavCUT SKU: 27052-FDA Diameter: 5.2 mm Material: HSS‑G Point angle: 135° Execution: short Spiral length: 52 mm Total length: 86 mm Shank execution: fully ground Colour / Finish: bright finished Applicable for: Drilling Machine, Hand Drill Standard: DIN 338 Application: Drills for metal Model series: Basic Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? The MetavCUT Twist Drill Type N is primarily used for machining high‑strength materials and larger drill diameters; its geometry and HSS‑G construction make it suitable for demanding metal drilling tasks where higher loads and abrasion resistance are required. The shape is relatively simple to resharpen and remains robust under heavy use. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill category and is optimised for machining a range of ferrous and non‑ferrous materials.
5.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Spiralbohrer von MetavCUT (Kurz, HSS-G, 5,5 mm) Spiralbohrer kurz HSS-G für präzise Metallbohrungen an Handbohrmaschine oder stationärer Maschine Kurzbauform nach DIN 338 für hohe Stabilität HSS-G geschliffen für schnelleres Bohren Spitzenwinkel 135° für harte Werkstoffe Geschliffener Zylinderschaft für sichere Aufnahme Passend für Handbohrmaschine und Bohrständer Präzise Leistung bei Stahl und Gusseisen Der HSS-G Werkstoff gewährleistet eine hohe Warmfestigkeit und eine gleichbleibende Schneidkante, wodurch saubere Bohrbilder in legierten und unlegierten Stahl erzielt werden. Der Spiralbohrer wurde mit einem Spitzenwinkel 135° ausgelegt, um das Eindringen in harte Werkstoffe wie Edelstahl zu erleichtern und gleichzeitig das Ausreißen an der Austrittskante zu reduzieren. Anwender profitieren von genauerer Lochlage und weniger Nacharbeit. Stabile Konstruktion sorgt für konstante Ergebnisse Die kurze Ausführung nach DIN 338 reduziert die Auskraglänge und erhöht dadurch die Stabilität im Bohrfutter. Die geschliffene Schaftausführung sorgt für eine präzise Aufnahme im Spannfutter und minimiert das Wanken bei Hand- oder stationärem Betrieb. Durch die robuste Geometrie werden Vibrationen gedämpft und die Standzeit der Bohrerschneide verbessert. Zielgerichteter Einsatz für Werkstatt und Montage Dieser Spiralbohrer der Basic Line ist konzipiert für Einsatzbereiche wie Maschinenbau, Instandhaltung und Montage, in denen schnelle, wiederholbare Metallbohrungen gefragt sind. Die Ausführung Typ N macht ihn besonders geeignet für Eisen, Stahl und Gusseisen; weiche Kunststoffe sind nicht die primäre Anwendung. Die Kombination aus Kurzbauform und geschliffener Oberfläche empfiehlt den Bohrer für Anwendungen mit begrenztem Auskragmaß. Effizienzsteigerung durch Material und Geometrie Die geschliffene HSS-G Ausführung ermöglicht ein bis zu 40 % schnelleres Bohren bei zugleich deutlich geringerer Anpresskraft, was die Ermüdung des Anwenders verringert und die Bearbeitungszeiten reduziert. Die Spirallänge von 57 mm unterstützt die Spanabfuhr in normalen Bohrtiefebereichen, während die Gesamtlänge von 93 mm eine kompakte Handhabung garantiert. Das Ergebnis ist eine wirtschaftliche Lösung für tägliche Metallbearbeitung. MetavCUT Spiralbohrer Basic Line mit HSS-G empfiehlt sich für alle, die präzise Stahlbohrungen mit hoher Standzeit und effizienter Arbeitsweise erwarten – Bestellempfehlung über Metav, bei technischer Rückfrage eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 27055-FDA Marke: MetavCUT Serie: Basic Line Bezeichnung: Spiralbohrer Typ: Typ N Material: HSS-G Norm: DIN 338 Ausführung: kurz Schaftausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine Spitzenwinkel: 135° Verpackungseinheit: 10 Daten Durchmesser: 5,5 mm Spirallänge: 57 mm Gesamtlänge: 93 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten HSS-G: geschliffener Schnellarbeitsstahl DIN 338: kurze Spiralbohrer mit Zylinderschaft Typ N: Normalspirale für Metall Kurzbauform: erhöhte Stabilität und Präzision Geschliffener Schaft: verbesserte Spannaufnahme FAQ Für welche Materialien ist der Bohrer am besten geeignet? Der MetavCUT Spiralbohrer Basic Line (Typ N, SKU 27055-FDA) ist ideal für legierten und unlegierten Stahl, Gussstahl, Gusseisen sowie Nichteisenmetalle und harte Kunststoffe; für sehr weiche Werkstoffe sind andere Spitzengeometrien besser geeignet. Welche Vorteile bietet die kurze Ausführung nach DIN 338? Die kurze Ausführung reduziert die Auskraglänge und erhöht die Stabilität im Spannfutter, wodurch der MetavCUT Spiralbohrer präzisere Lochlagen und geringere Vibrationen bei Hand- und stationärem Bohren liefert. Wozu dient der Spitzenwinkel von 135°? Der 135° Spitzenwinkel des MetavCUT Spiralbohrers verkürzt die Anbohrzeit in harten Werkstoffen und verbessert das Zentrieren bei gewölbten Oberflächen, ohne die Standzeit zu beeinträchtigen. Kann der Bohrer in Handbohrmaschinen verwendet werden? Ja, der Spiralbohrer wurde für den Einsatz an Handbohrmaschine sowie an stationären Maschinen konzipiert; die kurze Bauform und der geschliffene Schaft erhöhen dabei die Betriebssicherheit. Wie unterstützt HSS-G die Leistung im Vergleich zu Standard HSS? Die geschliffene HSS-G Werkstoffausführung ermöglicht ein effizienteres Spanen und kann nach Herstellerangaben ein schnelleres Bohren bei reduzierter Anpresskraft erreichen, was Arbeitszeit und Werkzeugverschleiß senkt.
5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Kompakte Empfehlung: Der Spiralbohrer 27050-FDA kombiniert HSS-G Werkstoff, einen 135° Spitzenwinkel und eine geschliffene Schaftausführung, wodurch hohe Stabilität und schnelle Eindringzeiten bei Metallbohrungen erreicht werden. Die kurze Ausführung reduziert Auslenkungen und sorgt für präzise Bohrbilder; bei Bedarf steht die Beratung von Metav zur technischen Klärung bereit. Spiralbohrer 27050-FDA von MetavCUT Der Spiralbohrer 27050-FDA ist ein kurzer, geschliffener HSS-G Bohrer nach DIN 338, speziell ausgelegt für präzise Metallbohrungen an Handbohrmaschinen und stationären Bohrmaschinen. HSS-G Material für hohe Schnittleistung 135° Spitzenwinkel für harte Werkstoffe Geschliffener Zylinderschaft verbessert Rundlaufgenauigkeit Kurze Ausführung reduziert Vibrationen und Bruchrisiko DIN 338 Norm: kurze Spiralbohrer mit Zylinderschaft Präzision und Stabilität bei Metallbohrungen Der kurze Spiralbohrer überzeugt durch seine reduzierte Auskraglänge, was die Stabilität deutlich erhöht und Verkantungen minimiert. Durch die geschliffene Schaftausführung wird der Rundlauf verbessert, wodurch Bohrbild und Maßhaltigkeit bei Metallarbeiten verlässlich bleiben. Anwender profitieren von geringerer Bruchgefahr und konsistenten Ergebnissen besonders bei legierten und unlegierten Stählen. Materialvorteile und Leistungssteigerung durch HSS-G Der Werkstoff HSS-G ermöglicht höhere Schnittgeschwindigkeiten und eine verringerte Anpresskraft gegenüber herkömmlichem HSS. Das Ergebnis ist ein effizienterer Bohrprozess mit bis zu 40 % schnellerer Bohrleistung und spürbar geringerem Bedienaufwand. Der 135° Spitzenwinkel ist für härtere Werkstoffe wie Edelstahl optimiert und reduziert das Ausrissrisiko beim Anbohren. Geeignete Anwendungen und Zielgruppe Dieser Bohrer richtet sich an Anwender im Maschinenbau, in der Werkstatt und an erfahrene Heimwerker, die präzise Metallbohrungen erwarten. Typische Einsatzzwecke sind das Bohren in Baustahl, Gusseisen, Temperguss, Nichteisenmetallen und Hartkunststoff. Die kurze Bauform ist ideal für präzise Durchgangs- und Sacklochbohrungen auf stationären Maschinen oder mit stabilen Handbohrmaschinen. Handhabung, Vorbeugung und Praxisempfehlungen Für beste Ergebnisse sollte vor dem Bohren zentriert werden, insbesondere bei kleinen Durchmessern, und bei harten Werkstoffen ein geeigneter Kühlschmierstoff verwendet werden. Die Norm DIN 338 beschreibt die Ausführung und Anwendungsbereiche kurzer Spiralbohrer; die geschliffene Fertigung erhöht die Standzeit und reduziert Nacharbeit. Bei tieferen Bohrungen empfiehlt sich stufenweises Vorgehen, um Spanabfuhr und Kühlung sicherzustellen. Warum dieser Bohrer die Werkstatt effizienter macht Mit dem Spiralbohrer 27050-FDA reduzieren sich Nacharbeiten und Werkzeugwechsel durch höhere Präzision und längere Standzeit. Die Kombination aus HSS-G und geschliffener Schaftqualität ermöglicht kürzere Bearbeitungszeiten und gleichbleibend gute Bohrergebnisse, was insbesondere bei wiederkehrenden Metallarbeiten die Produktivität steigert. Mit dem Spiralbohrer 27050-FDA von MetavCUT erhalten Sie ein robustes Präzisionswerkzeug für anspruchsvolle Metallbohrungen – bestellen Sie direkt bei Metav und kontaktieren Sie uns bei Fragen per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale SKU: 27050-FDA Marke: MetavCUT Produktfamilie: Basic Line Bezeichnung: Spiralbohrer Fakten Durchmesser: 5 mm Gesamtlänge: 86 mm Spirallänge: 52 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G Norm: DIN 338 Schaftausführung: geschliffen Ausführung: kurz Typ: Typ N Farbe: blank Für Bohrmaschine: Handbohrmaschine FAQ Für welche Materialien ist der Spiralbohrer 27050-FDA am besten geeignet? Der Spiralbohrer 27050-FDA von MetavCUT eignet sich besonders für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Temperguss, Nichteisenmetalle und Hartkunststoff dank HSS-G Material und 135° Spitzenwinkel. Kann der Spiralbohrer 27050-FDA in Handbohrmaschinen verwendet werden? Ja, der Spiralbohrer 27050-FDA ist für die Verwendung an Handbohrmaschinen vorgesehen; die kurze Ausführung verbessert die Stabilität und reduziert die Gefahr von Verbiegen. Warum ist die geschliffene Schaftausführung wichtig? Die geschliffene Schaftausführung des Spiralbohrer 27050-FDA verbessert den Rundlauf, was zu präziseren Bohrungen und längerer Werkzeugstandzeit führt. Entspricht der Bohrer einer Norm und welche Vorteile bringt das? Der Spiralbohrer 27050-FDA entspricht der DIN 338, was Klarheit über Abmessungen und Ausführung bietet und die Einsetzbarkeit in standardisierten Fertigungsprozessen erleichtert.
6.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Introducing Twist Drill Type N (Short) — 6.5 mm · 135° · HSS-G · Bright Finished · DIN 338 The Twist Drill is a short Type N drill designed for precise metalworking with a 6.5 mm diameter, optimised for Drilling Machine applications. Short Type N Twist Drill for precise metal work HSS‑G material: faster drilling, less feed force 135° tip for harder materials such as stainless steel Fully ground shank for improved concentricity Conforms to DIN 338 for short cylindrical drills Faster penetration and lower feed force for demanding metalwork The HSS‑G construction delivers a clear performance advantage: up to 40% faster drilling and approximately 50% lower feed force compared with conventional HSS tools. This means less operator strain and reduced wear on both tool and machine when processing alloyed and unalloyed steel, cast steel and non‑ferrous metals. The 135° Tip is optimised for tougher materials, shortening dwell on the surface and improving centring on curved or hardened parts. For workshop environments where efficiency and repeatability matter, this design converts technical properties into measurable productivity gains. Short design for superior stability and precise holes Built to the DIN 338 definition of a short cylindrical drill, the reduced overhang of the Short version greatly increases rigidity and reduces bending. The shorter exposed length results in improved concentricity and less vibration during operation, which translates into cleaner hole geometry and longer tool life. Where tight tolerances are required, the reduced tendency to deflect ensures repeatable results even at larger diameters and higher spindle speeds. This stability makes the tool particularly suitable for stationary and portable Drilling Machine setups that demand both accuracy and throughput. Shank, finish and practical advantages at a glance The Fully Ground Shank provides excellent concentricity and secure clamping in chucks, while the Bright Finished surface aids chip evacuation and visual inspection for wear. With a Spiral Length of 63 mm and an overall length of 101 mm, the geometry balances cutting capacity and strength for common metalworking tasks. The Type N normal spiral is the classic geometry for metal drilling and is straightforward to resharpen, which keeps replacement costs down and simplifies workshop maintenance routines. These characteristics combine to offer a robust solution for professional metalworkers seeking a reliable, easy‑to‑use drill bit. Strong recommendation: choose the MetavCUT Twist Drill Type N short in HSS‑G for precision metal drilling; for technical advice or to confirm suitability for specific applications, METAV Werkzeuge offers expert consultation — Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271 Technical details Designation: Twist Drill Marke: MetavCUT SKU: 27065-FDA Diameter: 6.5 mm Tip angle: 135° Type: Type N Execution: Short Material: HSS-G Spiral length: 63 mm Overall length: 101 mm Shank execution: Fully ground Colour / Finish: Bright finished Application: Drills for metal Standard: DIN 338 Model series: Basic Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill Type N (Short) is primarily used for drilling high‑strength materials and larger diameters in metalworking. Designed for metal, this short HSS‑G drill excels when machining alloyed and unalloyed steel, cast steel, cast iron, sintered iron, tempered castings, non‑ferrous metals and hard plastics; its geometry and material make it resilient under greater loads. Which three drill types exist? Commonly distinguished drill types are Metal drill, Wood drill and Masonry/Concrete drill. The MetavCUT Twist Drill belongs to the Metal drill category and is optimised for metalworking tasks.
6.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Der MetavCUT HSS-G Spiralbohrer kombiniert Wirtschaftlichkeit, Stabilität und hohe Bohrgeschwindigkeit für zuverlässige Metallbearbeitung; die kurze Ausführung sorgt für bessere Rundlaufgenauigkeit und reduzierte Bruchgefahr, Bestellungen und technische Beratung sind direkt über Metav erreichbar. Spiralbohrer von MetavCUT – HSS-G Kurzausführung (Ø 6,8 mm) Spiralbohrer kurzausführung für präzises Bohren in Metall mit HSS-G, Typ N und 135° Spitzenwinkel HSS-G geschliffen für hohe Schnittgeschwindigkeit Kurze Ausführung für maximale Stabilität 135° Spitzenwinkel für harte Werkstoffe Geeignet für Handbohrmaschine und stationäre Maschinen DIN 338 konform, Basic Line Ausführung Hohe Leistung dank geschliffenem HSS-G für zügiges Arbeiten Die geschliffene HSS-G-Güte sorgt für ein bis zu 40 % schnelleres Bohren und benötigt 50 % weniger Anpresskraft gegenüber herkömmlichen HSS-Bohrern. Dadurch wird die Arbeit in legierten und unlegierten Stahlarten effizienter, ohne die Kontrolle zu verlieren. Für Werkstattbetriebe bedeutet das: kürzere Bearbeitungszeiten und weniger Belastung für Maschine und Bediener. Stabilität und Präzision durch kurze Ausführung und geschliffenen Schaft Weil die Auskraglänge reduziert ist, liefert die kurze Bauform eine deutlich höhere Stabilität und geringere Vibrationen beim Bohren in harten Materialien. Das führt zu saubereren Bohrbildern und besseren Toleranzen bei Passungen. Die geschliffene Schaftausführung unterstützt sicheren Halt im Bohrfutter und minimiert ein Verdrehen bei höheren Drehmomenten. Materialvielfalt und Anwendungsempfehlung für Metallbearbeitung Der Bohrer ist ausgelegt für legierten Stahl, unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff. Der 135° Spitzenwinkel erhöht die Standzeit bei zähen Werkstoffen wie Edelstahl, während die Typ-N-Normalspirale universelle Schneidkanten für viele Metallarten bietet. Für präzise Vorbohrungen empfehlen sich kurze Vorschübe und geeignete Kühlschmierstoffe. Bedienkomfort und Einsatz in der Werkstatt Dieser Kurzbohrer arbeitet zuverlässig in Handbohrmaschine und stationären Bohrmaschinen; die kompakte Länge reduziert das Spiel beim Einspannvorgang. Anwender profitieren von einfacher Handhabung beim Positionieren und geringerem Bruchrisiko bei manueller Führung. Für Serienarbeiten in der Werkstatt empfiehlt sich regelmäßige Kontrolle des Rundlaufs der Spindel zur Maximierung der Standzeit. Zielgruppe und wirtschaftlicher Nutzen für Betriebe Entwickelt für Handwerk, Montage und Kleinserienfertigung, bietet die Basic Line eine kosteneffiziente Lösung für Betriebe, die hohe Präzision ohne übermäßige Investition benötigen. Die Kombination aus Stabilität und hoher Schnittgeschwindigkeit senkt Fertigungskosten und erhöht die Produktivität bei wiederkehrenden Metallbohrungen. Setzen Sie auf Präzision mit dem MetavCUT HSS-G Spiralbohrer und fordern Sie Ihr persönliches Angebot per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 an, alternativ WhatsApp +49 170 2837271 Produktmerkmale Artikelnummer: 27068-FDA Marke: MetavCUT Serie: Basic Line Bezeichnung: Spiralbohrer Daten Durchmesser: 6,8 mm Gesamtlänge: 109 mm Spirallänge: 69 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Typ: Typ N (Normalspirale für Metall) Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) Ausführung: kurz (reduzierte Auskraglänge für Stabilität) Schaftausführung: geschliffen (vollständig geschliffener Schaft für sicheren Halt) Farbe: blank / bright finished Anwendung: Bohrer für Metall Für Bohrmaschine: Handbohrmaschine FAQ Welche Materialien lassen sich mit diesem Bohrer bearbeiten? Der MetavCUT Spiralbohrer aus HSS-G ist für legierte und unlegierte Stähle, Gusswerkstoffe, Nichteisenmetalle und Hartkunststoffe geeignet; bei besonders zähen Werkstoffen wie Edelstahl empfiehlt sich der Einsatz von Kühlschmierstoff und reduzierte Vorschubgeschwindigkeiten. Ist die kurze Ausführung für Handgebrauch geeignet? Ja, die kurze Ausführung bietet erhöhte Stabilität und ist speziell für manuelle Anwendungen in Handbohrmaschine sowie für stationäre Maschinen gedacht; sie verringert das Risiko von Verbiegen und Bruch gegenüber längeren Bohrern. Warum ist der 135° Spitzenwinkel vorteilhaft? Der 135° Spitzenwinkel des Spiralbohrers reduziert die Anbohrzeit in harten Werkstoffen und verbessert die Zentrierung auf gewölbten Oberflächen, wodurch die Standzeit bei robusten Metallarten erhöht wird. Entspricht der Bohrer einer Norm und welche Bedeutung hat das? Der Bohrer entspricht DIN 338, was die Klassifizierung kurzer Spiralbohrer mit Zylinderschaft definiert und damit Maßgaben für Länge, Form und Einsatzgebiet liefert; das garantiert Kompatibilität und reproduzierbare Leistung in der Fertigung. Welche Vorteile bringt die geschliffene Schaftausführung? Ein vollständig geschliffener Schaft gewährleistet präzisen Rundlauf im Futter und reduziert Rutscherscheinungen unter Last, was zu saubereren Bohrbildern und längeren Standzeiten führt.
6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Introducing the Twist Drill (Type N) by MetavCUT — 6 mm | HSS‑G | short | bright finished | 135° tip | DIN 338 A Twist Drill (Type N) designed as a short HSS‑G bit for precise metal drilling in drilling machines. Short design for increased stability and precision HSS‑G for faster drilling and lower feed force 135° tip angle for hard materials such as stainless steel Fully ground shank for secure clamping in drilling machines Conforms to DIN 338 for short twist drills Greater cutting efficiency for demanding metals Engineered with HSS‑G, this short bit delivers up to 40% faster drilling while requiring significantly less feed force compared with conventional HSS. The material composition improves heat resistance and edge retention, which means more consistent performance when working with alloyed and unalloyed steels, cast steel and non‑ferrous metals. For workshop applications where cycle time and tool life matter, the enhanced cutting properties provide a measurable productivity advantage without compromising hole quality. Stable drilling and improved centring in tight setups The reduced overall length and short projection increase stability and reduce deflection in confined or deep‑bore situations. Classified under DIN 338 as a short twist drill with a cylindrical shank, this geometry minimises runout and helps achieve more accurate concentricity on the workpiece. The combination of short design and a 135° tip angle is especially suitable for harder materials, reducing walking on curved surfaces and shortening the initial contact time. Optimised geometry for metalworking applications As a Type N (normal spiral) tool, the bit is tailored for standard metal drilling tasks. The 135° tip favours drilling into tougher metals such as stainless steel by providing a flatter cutting action that lowers the risk of chipping at the entry. The flute geometry ensures efficient chip evacuation during machining, which helps maintain consistent hole dimensions and surface finish when used in both stationary and portable drilling machines. Secure clamping and reliable handling The fully ground shank guarantees precise fitment in chucks and collets, reducing slippage and enabling safe high‑speed operation. A bright finished surface offers basic corrosion resistance and a smooth appearance while keeping dimensional accuracy. Where tool change speed and secure holding are essential, the ground shank and standard cylindrical form support dependable toolholding across a range of drilling machines. Choose the MetavCUT HSS‑G Twist Drill Type N for reliable, high‑performance metal drilling — for expert advice or technical support contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 27060-FDA Diameter: 6 mm Overall Length: 93 mm Spiral Length: 57 mm Tip Angle: 135° Type: Type N Material: HSS‑G Execution: short Shank Execution: fully ground Colour / Surface: bright finished Application: Drills for metal For Drilling Machine: Drilling Machine Model Series: Basic Line Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N used for? The MetavCUT Twist Drill Type N is primarily applied to machining high‑strength materials and larger hole diameters; it is designed for metalworking where stability and fast cutting are required. Its short form is easy to grind and withstands higher mechanical loads. Which three drill types exist? Common drill categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill group optimised for steel and similar materials. Why are Twist Drills pointed? Pointing reduces the cross‑cut at the tip of the Twist Drill, which significantly lowers friction and therefore the necessary feed forces. At the same time the sharpened tip improves centring in the Workpiece. Can the MetavCUT Twist Drill be used for wood? Metal drills like the MetavCUT Twist Drill can be used in wood, but they typically provide less guidance and a less clean finish than dedicated wood drills. They are easier to resharpen and have lower self‑feed behaviour. At which drilling depths is the Twist Drill most commonly used? A solid through‑hole is commonly produced with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The general notion that HSSE is always superior to HSS is not universally correct. Evaluate the working conditions carefully to decide whether the higher cost of HSSE is justified for the intended application.
7.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Drill Bit) – 7.5 mm, 135° tip, Type N, Bright Finished, Short, HSS‑G, DIN 338 by MetavCUT The Twist Drill short Type N drill bit is a precision metalworking drill designed for Drilling Machines, offering a 7.5 mm diameter and a 135° tip angle for robust performance in hard materials. Short Type N design for high stability HSS‑G: up to 40% faster drilling and less feed force 7.5 mm diameter with 135° tip for hard steels Fully ground shank for precise clamping Conforms to DIN 338 for short metal Twist Drills Faster metalworking through optimised HSS‑G performance The HSS‑G material provides a measurable efficiency advantage: according to manufacturer data this fully ground High Speed Steel formulation enables up to 40% faster drilling and requires roughly 50% less feed force compared with conventional HSS bits. This translates into shorter cycle times and reduced operator effort when machining alloyed and unalloyed steels, cast steels, cast iron, sintered iron, tempered castings, non‑ferrous metals and hard plastics. The result is higher productivity in workshops and production environments without sacrificing hole quality. Stability and precision thanks to the short DIN 338 format A short Spiral Length and reduced overhang, as defined by DIN 338, reduce deflection and vibration during drilling. This geometry improves concentricity and hole tolerances on stationary and portable Drilling Machines, making the bit especially suitable where rigidity matters. For precision tasks in metal fabrication or maintenance work, the compact design minimises chatter and bending, delivering cleaner holes and extending tool life through lower mechanical stress. Tip geometry and dimensions engineered for hard materials The 7.5 mm diameter combined with a 135° tip angle is tailored for harder materials such as stainless steel and other tough alloys. A larger tip angle increases the material contact area at the start of the cut, reducing the tendency to grab and shortening the initial penetration time. The Type N normal spiral is the classical metalworking profile, optimised for chip evacuation and consistent cutting in metallic substrates. The bit is bright finished for good surface consistency and chip flow. Secure clamping and simple regrinding for extended use The fully ground cylindrical shank guarantees accurate seating in chucks and collets, supporting repeatable concentricity and uncomplicated tool changes. Compared with rolled shank variants, a ground shank improves grip and reduces slippage under higher torque. Additionally, the straightforward geometry of this Twist Drill allows economical regrinding where appropriate, helping to extend service life and keep workshop costs down while maintaining acceptable hole quality. Practical applications and recommended user groups Designed for robust metalworking tasks, this short Twist Drill suits maintenance technicians, toolroom operatives and industrial workshops that require reliable, repeatable holes in steel and related materials. Its balance of stability, tip geometry and HSS‑G performance makes it a practical choice for production runs on Drilling Machines as well as precise repair and retrofit jobs where reduced runout and clean entry are important. METAVCUT’s Basic Line positions this bit as a dependable everyday tool for demanding metal applications. Strong recommendation from MetavCUT: choose this HSS‑G short Twist Drill for reliable metalworking performance, and contact METAV Werkzeuge for expert technical advice and application support — 📧 info@metav-werkzeuge.com — ☎️ +49 2822 7131930 — ✔️ WhatsApp +49 170 2837271 Twist Drill (Short Type N) Brand: MetavCUT SKU: 27075-FDA Diameter: 7.5 mm Tip angle: 135° Material: HSS‑G Norm: DIN 338 Execution: Short Spiral length: 69 mm Total length: 109 mm Shank: Fully ground Colour/Finish: Bright finished For machine: Drilling Machine Application: Drills for metal Model series: Basic Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill by MetavCUT suitable for and where is it best used? The MetavCUT Twist Drill short Type N is intended primarily for metalworking; its HSS‑G composition and Type N spiral make it well suited to alloyed and unalloyed steels, cast steels, cast iron, sintered iron, tempered castings, non‑ferrous metals and hard plastics, and it performs reliably in workshop and industrial drilling applications. How does the short design affect drilling results with the MetavCUT Twist Drill? A short format per DIN 338 reduces the exposed length of the bit, increasing stiffness and lowering the risk of bending; this improves concentricity and hole accuracy on Drilling Machines and is particularly advantageous for precision tasks and drilling in hard materials. For what are Twist Drills used? Twist Drills are mainly applied when machining high‑strength materials and larger diameters; this form is easy to regrind and withstands higher loads, making it a common choice for demanding metalworking and production tasks. Which three drill types are there? The main categories are metal drill bits, wood drill bits and stone/concrete drill bits.
7.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Type N — 7.8 mm, 135°, HSS‑G, short, bright finished, DIN 338 The Twist Drill Type N short is a precision metal‑drilling bit for Drilling Machines, designed for stable, high‑performance machining of alloyed and unalloyed steels. HSS‑G fully ground for up to 40% faster drilling 135° tip for hard materials and stainless steel Short design for greater stability and accuracy Conforms to DIN 338 for standardised quality Bright finished surface for improved chip removal Precision and performance for demanding metalworking tasks The Twist Drill from MetavCUT is built in HSS‑G, a high‑speed steel grade that combines wear resistance with reliable cutting action. This fully ground design reduces required feed force and increases penetration speed, which translates directly into time savings on repetitive metalwork. The HSS‑G composition makes the bit especially suitable for Alloyed Steel, Cast Steel, Gusseisen and hard plastics, offering consistent cutting performance on tougher materials. Designed geometry that improves centring and reduces walking With a 135° tip angle and a Type N (normal spiral) geometry, this short twist drill delivers improved centring on flat and slightly curved surfaces and reduces the initial wander common with blunter tips. The larger tip angle is optimised for harder workpieces, shortening engagement time and stabilising the cut. Users benefit from easier pilot drilling and a more predictable drilling path, which supports accurate hole placement in precision assemblies. Short length for stability and repeatable accuracy The short execution per DIN 338 minimises overhang and bending, increasing rigidity during the cut. Reduced deflection yields cleaner holes and extends tool life by lowering side loads. This makes the bit particularly effective in bench and column drilling setups as well as in portable Drilling Machines where stiffness and repeatability are essential for production quality and reduced rework. Practical advantages and straightforward handling A bright finished surface promotes smoother chip evacuation and facilitates visual inspection of the flute geometry after use. The fully ground shank ensures secure clamping in standard chucks and steadier torque transmission. For maintenance, the tool can be resharpened easily while retaining its geometric advantages, so the bit remains a cost‑effective choice for workshops that perform frequent repairs and regrinds. Who benefits from this drill Workshop professionals, metal fabricators and maintenance technicians will appreciate the combination of stability, speed and material versatility. The MetavCUT basic line bit is aimed at users who require reliable, repeatable holes in demanding metalworking contexts rather than general‑purpose woodworking or masonry tasks. Choose MetavCUT HSS‑G Twist Drill Type N for faster, more controlled metal drilling — METAV Werkzeuge offers expert technical consultation if specifications need verification; contact info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical data Designation: Twist Drill Brand: MetavCUT SKU: 27078-FDA Diameter: 7.8 mm Tip angle: 135° Type: Type N Execution: short Material: HSS‑G Colour: bright finished Shaft finish: fully ground Spiral length: 75 mm Total length: 117 mm Application: Drills for metal Model series: Basic Line Suitable for: Drilling Machine Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the Twist Drill by MetavCUT Type N machine effectively? The MetavCUT Twist Drill Type N is intended primarily for metalworking; its HSS‑G composition performs well in alloyed and unalloyed steel, Cast Steel, Gusseisen, Sintereisen, non‑ferrous metals and hard plastics, providing reliable cutting action and good wear resistance. Is the MetavCUT Twist Drill Type N suitable for portable Drilling Machines? Yes, the short design and fully ground shank of the MetavCUT Twist Drill Type N increase stability and reduce bending, making it appropriate for both stationary and portable Drilling Machines where reduced overhang improves hole quality. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high‑strength materials and larger drill diameters. It is easy to resharpen and withstands higher loads, making it suitable for robust metalworking tasks. Which three drill types exist? The three main drill types are Metal Drill, Wood Drill and Stone/Concrete Drill. Why are twist drills sharpened (pointed)? Pointing reduces the cross‑edge at the drill tip, significantly lowering friction forces and thus reducing the required feed force; it also improves centring of the drill in the workpiece. Can a metal twist drill be used for wood? A metal twist drill can be used in wood but will generally give less precise guidance and a rougher finish; however, such drills are easier to resharpen and tend to have lower self‑feed characteristics. At which drilling depths is the twist drill most commonly used? A through hole is typically executed with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm the twist drill is the most commonly used tool. Which is better, HSS or HSSE? The general belief that HSSE steels are universally superior to HSS is not correct; the choice should be based on actual working conditions and whether those conditions justify the higher cost of HSSE.
7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Type N — MetavCUT short HSS‑G 7 mm, 135° tip, bright finished, DIN 338 The Twist Drill Type N short from MetavCUT is a precision HSS‑G 7 mm drill bit with a 135° tip angle, bright finished and fully ground shaft, engineered for metalworking on Drilling Machines. HSS‑G ground for up to 40% faster drilling 135° tip for hard and stainless steels Short design for higher stability and precision Fully ground shaft for improved concentricity Conforms to DIN 338 for short twist drills Faster machining with less effort thanks to HSS‑G technology Designed primarily for professional metalworking, this HSS‑G short Twist Drill delivers greater drilling performance and reduced operator effort. The ground finish of the cutting edges enables up to 40% faster penetration and requires significantly lower feed force compared with conventional HSS bits. Because the bit is short, it exhibits higher rigidity and reduced deflection, which directly improves hole accuracy when working in alloys, cast steels or temper cast materials. For users who prioritise efficiency on a Drilling Machine, this design translates into measurable time savings and more consistent results. Stable holes and reliable centring for demanding materials The 135° tip angle is chosen to perform reliably in harder materials such as stainless steel, where a blunter tip reduces wandering and shortens dwell time at the start of the hole. The Type N normal spiral geometry provides a universal flute form suited to metal drilling while the fully ground shaft improves concentricity and chuck clamping. Conforming to DIN 338 ensures consistent dimensions and manufacturing quality across the Basic Line series, so users benefit from reproducible drilling performance and predictable tool behaviour under higher loads. Optimised for metalworking applications and precise tasks Engineered for tasks where precision matters, this short Twist Drill is especially suited to drilling in unalloyed and alloyed steels, cast iron, sintered iron, non‑ferrous metals and hard plastics. The combination of Type N spiral geometry and the bright finished surface supports chip evacuation and prolongs tool life when paired with appropriate cutting fluid. Contractors, workshops and maintenance professionals will value the bit for producing clean, accurate holes in component manufacture, repair work and installation tasks. Practical handling, compatibility and supplier support The reduced overall length and the short spirallength improve handling and reduce the tendency to chatter in handheld and bench Drilling Machines. The fully ground shaft simplifies clamping and increases runout accuracy, which benefits threaded hole preparation and reaming follow‑up. If there is uncertainty whether this Twist Drill Type N suits a specific machine or material, METAV Werkzeuge provides extensive and competent advice to help select the right tool or to supply additional technical data. Choose the MetavCUT Twist Drill Type N for reliable metal drilling performance, and contact METAV Werkzeuge for expert advice by email info@metav-werkzeuge.com or by phone +49 2822 7131930 — WhatsApp available at +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 27070-FDA Type: Type N Diameter: 7 mm Tip angle: 135° Material: HSS‑G Standard: DIN 338 Execution: short Colour: bright finished Shaft finish: fully ground Spiral length: 69 mm Overall length: 109 mm Application: Drills for metal / Drilling Machine compatibility Model series: Basic Line Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for? The MetavCUT Twist Drill Type N is mainly used for machining high‑strength materials and larger drill diameters; its geometry and HSS‑G composition make it suitable for alloyed and unalloyed steel, cast steel and similar tough materials, and its form is relatively easy to re‑grind while withstanding greater loads. Which 3 drill types are there? Commonly distinguished drill types are: Metal drill bits, Wood drill bits and Stone/Concrete drill bits, with the MetavCUT Twist Drill Type N belonging to the metal drill category.
8.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Introducing the Twist Drill — Short Type N, Ø 8.5 mm, HSS‑G, DIN 338 A Twist Drill Short Type N designed for precise metalworking with drilling machines and hand drills, ideal for demanding steel and non‑ferrous applications. Short design for increased stability HSS‑G enables up to 40% faster drilling 135° point angle for hard materials Fully ground shank for precise centring Conforms to DIN 338 for consistent quality Faster metalworking with reduced effort and longer productivity The HSS‑G alloy of this Short Twist Drill delivers tangible performance advantages: studies and manufacturer data show up to 40% faster drilling and about 50% less feed force compared with conventional HSS drills. This translates directly into lower operator fatigue and higher throughput in production or workshop environments. For operators working with alloyed and unalloyed steel, cast steel, cast iron, sintered iron, tempered castings, non‑ferrous metals and hard plastics, the reduced cutting resistance means cleaner holes and fewer rejects, improving overall efficiency. Stability and precision for demanding metal applications Because this drill is a short design according to DIN 338, it offers higher Stability and less tendency to bend compared with longer variants. The compact overall length and solid geometry make it particularly suitable for precise bores on Drilling Machines and for use in confined setups where runout must be minimised. The result is improved hole quality and repeatability, especially when machining harder materials where rigidity is crucial. Optimised geometry and what the numbers mean for your work With a Diameter of 8.5 mm, a Spiral Length of 75 mm and an Overall Length of 117 mm, this Short Twist Drill Type N features a 135° point angle that eases entry into hard materials such as stainless steel. The Type N normal spiral is the classic metalworking geometry, developed to balance chip removal and cutting edge strength. For less experienced users: a larger point angle reduces the tendency to grab and shortens the time to pierce hard surfaces, while the fully ground Shank improves centring and reduces vibration for a cleaner hole. Durable finish, easy resharpening and professional support The bright finished surface and fully ground Shank ensure consistent seating in chucks and easy inspection after use. The Basic Line manufacturing approach focuses on reliable performance and straightforward resharpening when required, so workshop maintenance remains simple. For questions on suitability, machining parameters or resharpening advice, METAV Werkzeuge offers competent consultation and technical support to help match tooling to your exact requirements We recommend MetavCUT’s Short Twist Drill Type N with HSS‑G for precision metal drilling — for tailored technical advice and ordering assistance contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Technical Details Designation: Twist Drill (Short, Type N) Brand: MetavCUT SKU: 27085-FDA Diameter: 8.5 mm Point angle: 135° Material: HSS‑G Standard: DIN 338 Overall length: 117 mm Spiral length: 75 mm Shank finish: Fully ground Colour: Bright finished Execution: Short Model series: Basic Line Application: Drills for Metal For use with: Drilling Machine (Hand drill compatible) Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? A Twist Drill, such as the Short Type N from MetavCUT, is mainly used for machining high‑strength materials and larger hole diameters; its classic spiral form is easy to resharpen and withstands higher loads while delivering reliable bore quality in steels and other metals. Which three drill types exist? The main drill categories are Metal Drills, Wood Drills and Masonry/Concrete Drills; the MetavCUT Short Twist Drill Type N belongs to the Metal Drill family, optimised for steels and similar materials. Why are Twist Drills sharpened? Twist Drills like the MetavCUT Short Type N are sharpened to reduce the cross‑cut area at the tip, which lowers friction and required feed force while improving centring and entry into the workpiece.
8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Type N short – 8 mm, HSS‑G, 135°, bright finished (DIN 338) by MetavCUT The Twist Drill Type N short is a high‑performance metal drilling bit for drilling machines, designed for precise, stable holes in steel and other hard materials. Short design for high stability when drilling metal Ground HSS‑G for up to 40% faster drilling 135° tip angle optimised for harder materials Fully ground shank for secure clamping and concentricity Faster, easier drilling thanks to ground HSS‑G and optimized geometry The HSS‑G construction of this Twist Drill delivers tangible productivity gains: the ground High‑Speed Steel enables up to 40% faster drilling while requiring around 50% less feed force than conventional HSS tools. With an 8 mm Diameter and a 135° Tip Angle, this bit penetrates hard materials more reliably, reducing dwell time and wear on the tool. For professionals focused on cycle time and repeatable results, the combination of material and geometry translates directly into increased throughput and lower operator effort. Stable, precise holes from the short design and fully ground shank A shorter Overall Length and a fully ground shank improve rigidity and reduce deflection during drilling. This Twist Drill’s compact execution is particularly suitable for work on lathes, milling centres and hand drilling machines where tool overhang must be minimised. The result is cleaner hole walls and better positional accuracy, which benefits fabrication, assembly and maintenance tasks that demand tight tolerances. Built for metalworking — Type N normal spiral explained This Type N Normal Spiral is the classic configuration for metal drills and was chosen for its balanced chip evacuation and cutting action. According to DIN 338, the short design with a cylindrical shank is intended for robust, stationary or portable drilling in metal. For users less familiar with the terminology: Type N means a general‑purpose metal drill, and short refers to reduced length for improved stiffness and repeatability. Practical advantages and who benefits most Workshop technicians, maintenance crews and metal fabricators will appreciate the combination of durability and ease of use: the bright finished surface improves initial seating and handling, while the 75 mm Spiral Length and 117 mm Overall Length match typical requirements for through and blind holes in plate and component work. For demanding alloys, cast materials and engineering plastics the tool offers longevity and predictable performance, making it a dependable choice for daily production tasks. MetavCUT recommends this HSS‑G short Type N Twist Drill for professional metalworking — for tailored advice or to confirm suitability for your application contact METAV Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Data Designation: Twist Drill Brand: MetavCUT SKU: 27080-FDA Diameter: 8 mm Tip angle: 135° Material: HSS‑G Type: Typ N Execution: short Shank finish: fully ground Spiral length: 75 mm Overall length: 117 mm Colour: bright finished For drilling machine: Drilling Machine Standard: DIN 338 Model series: Basic Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills like the MetavCUT Twist Drill Type N are primarily used for the machining of high‑strength materials and for larger drill diameters. The short, ground HSS‑G design makes this Twist Drill robust under heavy loads and suitable for applications where fast penetration and durability are required. Which 3 drill types are there? The main categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for use in metalworking applications.
9.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Der kurze Spiralbohrer 9,5 mm von MetavCUT vereint die HSS-G-Schneidleistung mit einem 135° Spitzenwinkel und bietet dadurch schnellere Bohrfortschritte und bessere Führung bei harten Werkstoffen; sichern Sie präzise Ergebnisse für Stahl- und Eisenarbeiten direkt über Metav oder fragen Sie unsere technische Beratung bei Bedarf an. Spiralbohrer 9,5 mm (HSS-G, kurz) von MetavCUT Der Spiralbohrer 9,5 mm ist ein kurzer, geschliffener HSS-G Bohrer für präzise Metallbohrungen an Handbohrmaschine und stationären Maschinen Geschliffener HSS‑G für schnellere Zerspanung Kurze Ausführung für hohe Stabilität Spitzenwinkel 135° für harte Werkstoffe DIN 338 konform: kurze Spiralbohrer Zylinderschaft, geschliffen, für Handbohrmaschine Hohe Standzeit und effizientere Bohrleistung bei Stahl Aufgrund der HSS-G-Ausführung lässt sich das Bohrbild deutlich verbessern: die geschliffene Schneide reduziert den Schnittwiderstand und ermöglicht ein bis zu 40 % schnelleres Bohren bei gleichzeitig bis zu 50 % geringerer Anpresskraft gegenüber herkömmlichen HSS-Bohrern. Für Anwender bedeutet das weniger Erschöpfung bei Handarbeiten und kürzere Taktzeiten in der Werkstatt. Diese Eigenschaft macht den Bohrer besonders geeignet für legierte und unlegierte Stahlwerkstoffe sowie für Guss und Temperguss. Kompakte Bauform für präzise Führung und weniger Schwingung Die kurze Bauform nach DIN 338 sorgt für eine geringere Auskraglänge und somit für eine höhere Stabilität bei der Bearbeitung. Dadurch wird die Gefahr des Verkantens und des Wanderns reduziert, was zu saubereren Bohrbildern führt. Bei 9,5 mm Durchmesser empfiehlt sich der Einsatz in stationären Säulenbohrmaschinen oder gut geführten Handbohrmaschinen, wobei die geschliffene Schaftausführung die Spannkraft im Bohrfutter optimiert. Zielgruppe und typische Einsatzfelder in Werkstatt und Industrie Angesprochen sind mechanische Werkstätten, Instandhaltungsteams und anspruchsvolle Heimwerker, die robuste Metallverbindungen herstellen müssen. Der Typ N Normalspirale ist konzipiert für Metall, Eisen und Stahl, außerdem geeignet für Nichteisenmetalle und harte Kunststoffe. Der Bohrer erfüllt Anforderungen bei Montagearbeiten, Maschinenbauinstandsetzung und Seriennachbearbeitung, wo Präzision und Standzeit entscheiden. Praktische Anwendungstipps für längere Lebensdauer und besseres Ergebnis Für saubere Ergebnisse empfiehlt sich ein an das Material angepasster Vorschub und die Nutzung geeigneter Kühlschmierstoffe bei Stahl und Guss. Der 135° Spitzenwinkel erleichtert die Anbohrung in harten Werkstoffen wie Edelstahl und reduziert Auffasen, während bei hohen Präzisionsanforderungen ein Anpicken mit Zentrierbohrer die Position sicherstellt. Vermeiden Sie tiefe Durchmesser-zu-Längen-Verhältnisse und reinigen Sie die Spanräume regelmäßig, um ein Verstopfen zu verhindern. Mit dem MetavCUT HSS‑G Bohrer erzielen Sie zuverlässige Präzision bei Stahlarbeiten — sichern Sie sich dieses Werkzeug über Metav und kontaktieren Sie unsere technische Beratung per eMail info@metav-werkzeuge.com für Details zur Anwendung. Produktmerkmale Artikelnummer: 27095-FDA Marke: MetavCUT Serie: Basic Line Bezeichnung: Spiralbohrer Daten Durchmesser: 9,5 mm Gesamtlänge: 125 mm Spirallänge: 81 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) Schaftausführung: geschliffen (vollständig geschliffener Zylinderschaft) Ausführung: kurz (höhere Stabilität, geringere Auskraglänge) Typ: Typ N (Normalspirale für Metall) Farbe: blank (helle Oberfläche) Für Bohrmaschine: Handbohrmaschine / stationäre Aufnahme FAQ Wie unterscheidet sich der HSS‑G Spiralbohrer von anderen HSS‑Bohrern? Der MetavCUT Spiralbohrer in HSS‑G Ausführung hat eine geschliffene Schneide, die im Vergleich zu Standard‑HSS schneller schneidet und geringere Anpresskräfte benötigt, was bei Stahl und Guss zu längerer Standzeit führt. Eignet sich dieser Bohrer für Edelstahl? Ja, durch den 135° Spitzenwinkel ist der Spiralbohrer von MetavCUT besonders geeignet für harte Werkstoffe wie Edelstahl; der größere Winkel reduziert das Einlaufen und verbessert die Anbohrung. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Der kurze, geschliffene Zylinderschaft des Spiralbohrers ist für Handbohrmaschine geeignet, liefert jedoch beste Ergebnisse bei stabil geführten Bohrungen oder in stationären Säulenbohrmaschinen. Welche Serienbezeichnung und SKU hat dieses Produkt? Das Produkt gehört zur Basic Line von MetavCUT und ist unter der Artikelnummer 27095-FDA gelistet. Wie vermeide ich Brüche bei dünnen Bohraufgaben mit dem 9,5 mm Bohrer? Empfohlen wird sauberer Spanabtransport, moderater Vorschub, gegebenenfalls Kühlschmierstoff sowie bei hoher Präzision ein Vorbohren oder Zentrieren, um seitliches Wandern zu verhindern.
9mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — MetavCUT Basic Line, 9 mm, 135° Tip, HSS‑G (Short, Bright Finished, DIN 338) The Twist Drill is a short HSS‑G metalworking drill designed for Drilling Machines and handheld use, offering high feed efficiency and stable performance in demanding steel applications. Short design for stable, precise drilling 9 mm diameter for common metalworking tasks 135° tip for improved centring in hard materials Fully ground shank for accurate seating in chucks Conforms to DIN 338 for short twist drills Faster penetration and reduced feed effort for hard metals The HSS‑G composition delivers a clear advantage: up to 40% faster drilling and roughly 50% less thrust compared with conventional HSS bits. For users working with alloyed and unalloyed Steel, Cast Steel, Gusseisen and hard plastics, this means fewer tool changes and smoother cycles. The 135° tip angle reduces the tendency to wander on tough surfaces and shortens dwell during initial engagement. This results in more efficient machining and less operator fatigue. Short geometry for superior stability and hole quality A short overall length and a spiral length of 81 mm minimise overhang and vibration, producing more consistent hole geometry under moderate cutting conditions. The fully ground shank ensures solid clamping in chucks and better concentricity, improving finish and reducing runout. Because the flute length and geometry follow DIN 338, workshop operators benefit from predictable behaviour when switching between comparable short twist drills. Built for metalworking workshops and maintenance tasks This Type N twist drill is the classic choice for metal applications and is optimised for Drilling Machines as well as robust handheld units. Its bright finished surface eases chip evacuation in many metals while remaining straightforward to resharpen when needed. For maintenance engineers, toolroom technicians and small fabrication shops, the combination of 9 mm diameter and short design strikes a balance between versatility and rigidity. Industry standard compliance delivers reproducible results Manufactured to DIN 338 specifications within the MetavCUT Basic Line, this twist drill follows proven dimensional and performance criteria for short cylinder‑shank bits. The Type N normal spiral provides a versatile chip geometry for a wide range of metallic materials. If uncertainty remains about the correct geometry or material choice for a specific application, the short tip geometry and HSS‑G grade allow straightforward regrinding while maintaining performance. We recommend the MetavCUT Twist Drill from the Basic Line for precision metalworking where stability and efficient penetration matter most — for technical questions or selection support contact METAV Werkzeuge for expert advice: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Data Bezeichnung: Twist Drill Marke: MetavCUT SKU: 27090-FDA Durchmesser: 9 mm Spitzenwinkel: 135° Typ: Type N Ausführung: short Farbe: bright finished Material: HSS-G Schaft Ausführung: fully ground Gesamtlänge: 125 mm Spirallänge: 81 mm Anwendung: Drills for metal Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill suitable for? The MetavCUT Twist Drill (Type N, HSS‑G) is primarily intended for metalworking; it performs well in alloyed and unalloyed Steel, Cast Steel, Gusseisen and certain hard plastics, offering reliable penetration and chip formation for these materials. How does the short design of the MetavCUT Twist Drill benefit workshop use? A short Twist Drill from MetavCUT reduces overhang and vibration, improving hole accuracy and concentricity; the compact geometry is especially helpful for precise operations and when working with harder materials where deflection must be minimised. For what is a Twist Drill used? A Twist Drill is mainly employed for machining high‑strength materials and larger drill diameters; this form is easy to resharpen and endures higher loads. Which three drill types exist? The main categories are Metal Drills, Wood Drills and Stone/Concrete Drills. Why are Twist Drills sharpened at the tip? Tip sharpening reduces the cross‑cut at the drill tip, lowering friction and thus reducing required feed force while improving centring in the workpiece. Can a Twist Drill be used to drill wood? A Metal Drill can be used in wood, but guidance and finish are inferior compared with dedicated wood drills. Metal drills are easier to resharpen and show less self‑feeding tendency. For which drilling depths is the Twist Drill most commonly used? Twist Drills are the standard choice for through‑hole drilling. For diameters up to 20 mm and depths up to 100 mm they are the most frequently used tool. Is HSS better than HSSE? The common belief that HSSE is always superior to HSS is incorrect; selection should consider the specific working conditions and whether the extra cost of HSSE is justified. Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – wir stehen Ihnen gerne zur Verfügung. 📧 eMail: info@metav-werkzeuge.com ☎️ Telefon: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271
Precise metal drilling with a reliable twist drill
The HSS‑G twist drill DIN 338 type N, short and precision-ground with a bright finish and 135° point angle, is a universal industrial drill bit designed for demanding metalworking tasks. Its ground profile from solid, hardened high‑speed steel delivers excellent runout accuracy and razor‑sharp cutting edges for consistent, process‑secure results in maintenance and serial production.
How this twist drill performs in workshop and production environments
Manufactured by precision grinding from high‑performance high‑speed steel, the drill’s polished flutes enable low‑resistance chip evacuation while the flatter 135° point and obligatory cross grind provide dependable self‑centring. That combination often makes pre‑punching unnecessary, reduces required feed force and improves hole quality when used in hand drills, bench drills and pillar drills. The geometry is optimised for normal‑cutting materials and follows the DIN 338 standard for cylindrical shanks.
Tangible benefits you can rely on
- Consistent concentricity and runout accuracy from precision grinding
- Reduced chip adhesion on soft aluminium thanks to the bright (uncoated) surface
- Improved centring and reduced feed force with the 135° point angle and cross grind
- Versatile use across unalloyed and low‑alloy steel, cast iron and non‑ferrous metals
- Suitable for hand‑held and machine drilling thanks to the short DIN 338 cylinder shank
Why Metav is the smart source for workshop essentials
As a precision partner, Metav brings decades of expertise and a rigorous quality filter from Emmerich. With over 48,000 satisfied customers and a comprehensive range of more than 250,000 items, Metav supplies the right twist drill and complementary tooling reliably and without unnecessary complexity. For buyers who prioritise repeatable results in production and maintenance, Metav combines product competence with dependable supply logistics.
In short
The HSS‑G twist drill DIN 338 type N, short, precision‑ground, bright, 135° is an indispensable all‑round metalworking tool that balances high dimensional accuracy with robust, process‑safe drilling performance.
Technical data at a glance
- Material: high‑performance high‑speed steel (HSS‑G)
- Standard: DIN 338 (cylinder shank)
- Type: type N (for normal‑cutting materials)
- Length/format: short (suitable for hand and bench drills)
- Finish: bright (uncoated)
- Point angle: 135° with cross grind (self‑centring)
- flute geometry: precision‑ground, smooth for efficient chip evacuation
- Typical application: unalloyed and low‑alloy steel, cast iron, non‑ferrous metals; reduced tendency for chip adhesion on aluminium
FAQ
What is the difference between a twist drill and a standard drill bit?
A twist drill (also called a drill bit) uses helical flutes to remove chips; the HSS‑G twist drill DIN 338 type N is precision‑ground for higher concentricity and longer life compared with generic ground‑and‑polished bits.
Can this twist drill be used without pre‑punching on tougher steels?
Yes. The 135° point angle combined with a cross grind gives reliable self‑centring and often eliminates the need for pre‑punching when working with tougher steels.
Which materials are recommended for this metal twist drill?
The drill is intended for unalloyed and low‑alloy steel, cast iron and non‑ferrous metals; the bright finish helps prevent chip adhesion when drilling soft aluminium.
Is this drill suitable for hand drills as well as machine use?
Yes. The short DIN 338 cylinder shank format is designed for use in hand‑held drills and bench or pillar drilling machines, offering versatility for workshop and production environments.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com