Precise HSS-G twist drill for millimetre-accurate, burr-free holes
The HSS-G twist drill DIN 338 type N is a short, ground, uncoated tool with a 135° split point designed to deliver self-centring, repeatable drilling in steel, iron, sheet materials and non-ferrous metals. Its ground profile from high-speed steel gives superior run-out accuracy, razor-sharp cutting edges and extremely smooth flutes that reduce friction and prevent chip adhesion when machining aluminium and plastics. The 135° cross-ground tip eliminates the need for centre-punching, lowering thrust forces and preventing wander on smooth surfaces, which ensures process-reliable and dimensionally accurate holes. As a universal and economical choice for professional workshop and industrial use, this drill offers consistent chip evacuation and clean, true holes with minimal burr formation.
7.3mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short Type N Drill, Ø 7.3 mm, HSS‑G, 135°, Bright Finished The Twist Drill is a short Type N drilling tool designed for precise metalworking on drilling machines and hand drills. Short design for higher stability and accuracy HSS‑G ground geometry for sharp, clean holes 135° point angle optimised for hard materials Fully ground shank for excellent concentricity Conforms to DIN 338 for short twist drills Higher stability for accurate metal holes Shorter centre‑to‑end length gives the short design a clear advantage: it reduces overhang and vibration, resulting in greater stability and consistently round bores even at higher spindle speeds. This makes the tool particularly suitable for drilling steel and other hard materials where any bending of the tool would degrade hole quality. The reduced tendency to deflect means fewer reworks and a more predictable machining process for workshop and industrial operations. Faster, cleaner drilling in tough materials Thanks to the HSS‑G (ground high speed steel) geometry, chips form and evacuate cleanly while the cutting edges remain sharp. The 135° point angle is chosen to shorten the initial penetration time in hard metals and to improve centring on difficult surfaces. As a result, drilling becomes more efficient with less required feed force, which benefits both handheld and machine applications when working with alloyed and unalloyed steels, cast iron and other demanding materials. Designed for professionals and workshop environments Manufactured to the DIN 338 specification and offered in the Profi Line, this twist drill is engineered for repeatable performance in daily production. The fully ground shank ensures accurate clamping and minimal runout, supporting high precision on dedicated drilling machines. For craftsmen and maintenance technicians seeking a reliable short drill for metal, this Type N tool delivers the robustness and repeatability expected in professional settings. Clear advantages for specific applications When drilling in materials such as stainless steel or tempered castings, the combination of Type N normal spiral and a robust tip geometry reduces walking and improves guidance. The short version is preferable when hole precision supersedes reach, for example in jigged assemblies or where machine access limits tool length. Selecting this twist drill helps to avoid oversize holes and poor surface finishes that can arise from longer, more flexible cutters. Opt for the MetavCUT short Twist Drill Type N when demanding metalwork requires precision and reliability — METAV Werkzeuge provides expert consultation and technical support: info@metav-werkzeuge.com · Tel +49 2822 7131930 · WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 48073-FDA Diameter: 7.3 mm Point Angle: 135° Type: Type N Material: HSS‑G (ground) Execution: Short Overall Length: 109 mm Spiral Length: 69 mm Shank Finish: Fully ground Colour/Finish: Bright finished For: Drilling Machine / Hand Drill Application: Drills for metal Model Series: Profi Line Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill from MetavCUT suitable for? The MetavCUT Twist Drill Type N is primarily designed for metal: alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics. Its HSS‑G ground geometry delivers clean cutting action and good wear resistance for these materials. Can the Twist Drill be used in a hand drill as well as a drilling machine? Yes, the MetavCUT Twist Drill Type N can be used in both drilling machines and hand drills; however, its short design is especially advantageous in machine setups where stability and concentricity are critical for precision holes. What is a Twist Drill used for? A Twist Drill is mainly applied to machining high‑strength materials and larger drill diameters. The form is easy to grind and withstands greater loads, making it suitable for demanding metal drilling tasks. Which three drill types exist? The three common drill types are metal drills, wood drills and stone/concrete drills. Why are Twist Drills sharpened at the tip? Sharpening reduces the cross‑edge at the tip of the Twist Drill, significantly lowering friction and required feed forces; it also improves centring of the tip in the workpiece. Can a metal drill be used for wood drilling? A metal drill can be used in wood, but guidance is poorer and hole finish is less clean. Metal drills are easier to resharpen and exhibit less self‑feed than dedicated wood drills. For which drilling depths is the Twist Drill most commonly used? A twist drill is typically used for through drilling; for diameters up to about 20 mm and drilling depths up to 100 mm it is the most frequently employed tool. Is HSS or HSSE better? The general belief that HSSE steels are always superior to HSS is incorrect. Choose between HSS and HSSE based on specific working conditions and whether the performance gain justifies the higher cost.
7.4mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Die Kombination aus hoher Präzision und robuster Stabilität macht diesen Bohrer zur effizienten Lösung für Metallbearbeitung; profitieren Sie von schnellerem Vorschub und geringerer Anpresskraft und bestellen Sie den Spiralbohrer direkt über Metav oder fragen Sie unsere Beratung an. Spiralbohrer Kurzausführung HSS-G von MetavCUT Spiralbohrer Kurzausführung HSS-G für präzise Metallbohrungen an Handbohrmaschine und stationären Geräten Hohe Spürbarkeit bei harten Werkstoffen dank kurzer Auskraglänge Geschliffene Geometrie für besonders saubere Bohrlöcher Geeignet für Handbohrmaschine und stationäre Bohrmaschinen 135° Spitzenwinkel für Bearbeitung von Edelstahl Profi Line Ausführung von MetavCUT Robustheit und Materialvorteile für längere Standzeiten Der kurz ausgeführte HSS-G Bohrer überzeugt durch HSS-G Material und geschliffene Schneiden, die eine sehr scharfe Kante und hohe Rundlaufgenauigkeit liefern. Diese Kombination reduziert die erforderliche Anpresskraft um bis zu 50 % und ermöglicht ein bis zu 40 % schnelleres Bohren gegenüber herkömmlichen HSS-Varianten. Das Ergebnis ist ein deutlich reduzierter Kraftaufwand bei gleichbleibender Bohrlochqualität und eine geringere Belastung von Maschine und Werkstück. Präzise Anwendung im Standard-Bereich für Werkstatt und Montage Mit einem Durchmesser von 7,4 mm liegt dieser Bohrer im Standard-Bereich, ideal für Werkstatt, Montage und allgemeine Metallbearbeitung. Die kurze Ausführung minimiert Vibrationen und Wandern beim Anbohren, sodass auch Handgeführte Bohrmaschinen zuverlässig zum Einsatz kommen können. Die Geometrie eignet sich für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle und ermöglicht saubere, präzise Bohrungen bei normalen bis mittleren Bohrtiefen. Maschinenverträglichkeit und sichere Handhabung Die kürzere Auskraglänge und die volle Schaftgeschliffen-Ausführung erhöhen die Stabilität im Spannfutter und reduzieren Verbiegen und Bruchrisiko. Für optimale Ergebnisse empfiehlt sich der Einsatz mit geeigneter Kühlung bei zähen Materialien und das Anpunkten bei höheren Präzisionsanforderungen. Aufgrund der geschliffenen Fertigung ist der Bohrer besonders scharf, aber sensitiver gegenüber Schlägen, daher bei stationären Maschinen und kontrolliertem Vorschub besonders wirtschaftlich. Normkonformität, Spitzenwinkel und Anwenderhinweise Die Einhaltung der DIN 338 sowie die Auslegung als Typ N mit 135° Spitzenwinkel macht den Bohrer zur guten Wahl für härtere Werkstoffe wie Edelstahl, da der größere Spitzenwinkel die Anbohrzeit verkürzt und das Eindringen erleichtert. Anwender profitieren von der Profi Line Verarbeitung durch MetavCUT, die für konstante Qualität steht. Beachten Sie bei Einsatz in weichen Kunststoffen die passende Vorschub- und Drehzahlwahl, um Ausrisse zu vermeiden. Empfehlen Sie den MetavCUT Profi Line HSS‑G Spiralbohrer für präzise Metallbohrungen und kontaktieren Sie uns bei Unsicherheiten per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930, alternativ WhatsApp +49 170 2837271. Produktmerkmale Artikelnummer: 48074-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Profi Line Typ: Typ N Material: HSS-G Norm: DIN 338 Fakten Durchmesser: 7,4 mm Gesamtlänge: 109 mm Spirallänge: 69 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Ausführung: kurz Schaftausführung: geschliffen (G = geschliffen: sehr scharfe Kanten, hohe Präzision) Farbe: blank Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall Hersteller: MetavCUT Serie: Profi Line FAQ Ist dieser Bohrer für Edelstahl geeignet? Der Spiralbohrer von MetavCUT (Profi Line, Typ N, SKU 48074-FDA) ist mit einem 135° Spitzenwinkel ausgelegt und eignet sich gut für die Bearbeitung von Edelstahl bei angepasster Drehzahl und Kühlung. Kann ich den Bohrer mit einer Handbohrmaschine verwenden? Ja, die kurze Ausführung des HSS‑G Bohrers ist speziell dafür geeignet, Vibrationen und Verbiegen zu minimieren, sodass Handbohrmaschinen für normale Bohrtiefen eingesetzt werden können. Welche Werkstoffe bearbeitet der Bohrer zuverlässig? Der MetavCUT HSS‑G Spiralbohrer ist geeignet für legierten und unlegierten Stahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoffe. Wie unterscheidet sich die geschliffene Ausführung von gewalzten Bohrern? Geschliffene (HSS‑G) Bohrer bieten sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, was saubere Bohrlöcher ermöglicht; sie können jedoch spröder sein als gewalzte Varianten und profitieren von kontrollierter Kühlung. Welche Vorteile bietet die Profi Line Serie von MetavCUT? Die Profi Line Serie kombiniert normgerechte Fertigung nach DIN 338 mit gehobener Material- und Oberflächenqualität, was zu konstanteren Ergebnissen und längeren Standzeiten führt.
7.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill – Type N, Ø 7.5 mm, 135° tip, Short, Bright Finished, HSS‑G, DIN 338 by MetavCUT The Twist Drill Type N is a short, high‑performance metalworking drill designed for precision drilling in steels and other hard materials with a 135° tip angle for reduced wander. Short design for increased Stability and Precision Ground HSS‑G for sharp cutting and clean holes 135° tip for hard Metals and reduced breakout Conforms to DIN 338 for consistent dimensions and quality Faster, more stable drilling for professional metalwork A short design reduces overhang and significantly improves stability during drilling, which means less runout and more accurate hole placement. The fully ground HSS‑G geometry creates very sharp cutting edges that produce cleaner holes and lower burr formation. For users working on Steel, Cast Iron or Tempered Components, this yields a measurable gain in workpiece quality and shorter rework times. Optimised geometry reduces effort and increases lifetime Thanks to the 135° tip angle, the drill enters hard materials with less deflection, shortening the initial penetration phase and improving centring. Combined with the Type N normal spiral, the design balances chip evacuation and cutting force so that Feed Forces are reduced. This lets operators drill up to 40% faster in many applications while requiring noticeably less pressure at the chuck. Built for exacting applications and machine use Conformity to DIN 338 guarantees standardised lengths and shank dimensions for secure clamping in the chuck of any compatible Drilling Machine. The fully ground flute profile (HSS‑G) delivers excellent roundness and is especially suited to stationary or powered machines where consistent accuracy is required. Use coolant for prolonged tool life and to avoid thermal softening when machining alloyed steels. Who benefits from this short Type N twist drill Designed for professional workshops, tool rooms and production environments, the drill is ideal for technicians who need repeatable precision in metal fabrication. The shorter Spiral Length minimises vibration and is particularly useful when drilling into thick or high‑strength components. For occasional users performing metal repairs, the robust grind also allows straightforward re‑sharpening when required. We recommend the MetavCUT short Type N Twist Drill for demanding metalworking tasks — for tailored advice or additional technical data contact METAV Werkzeuge: info@metav-werkzeuge.com · Phone +49 2822 7131930 · WhatsApp +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 48075-FDA Diameter: 7.5 mm Tip Angle: 135° Type: Type N Overall Length: 109 mm Spiral Length: 69 mm Execution: short Shank Finish: fully ground Surface/Colour: bright finished Material: HSS-G Standard: DIN 338 Application: Drills for metal For Drilling Machine: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? A Twist Drill such as the MetavCUT Type N short drill is primarily used for machining high‑strength materials and for larger drill diameters. Its geometry is easy to re‑grind and it withstands higher mechanical loads, which makes it particularly suitable for steel and similar hard workpieces. Which three drill types exist? The three main categories are Metal Drills, Wood Drills and Stone/Concrete Drills, each optimised for the material to be machined and differing in tip geometry and flute design.
7.6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Type N – MetavCUT short HSS‑G, 7.6 mm, 135°, Bright Finished, DIN 338 The Twist Drill Type N is a short HSS‑G metal drill designed for precision work on drilling machines with a 7.6 mm diameter and a 135° point angle. Short design for high stability and reduced bending 135° point angle ideal for hard materials like stainless steel Fully ground shank for superior runout accuracy Conforms to DIN 338 for short HSS twist drills Bright finished for clear visual inspection of cutting edges Outstanding Precision and Reduced Deflection The short construction of this MetavCUT drill delivers higher stability and significantly less tendency to bend compared with longer variants. Because the exposed length beyond the chuck is reduced, the tool remains more rigid under load, which produces more accurate holes and reduces the need for rework. This compact geometry is especially advantageous when drilling into hard or tough materials where tool deflection would otherwise compromise hole quality. Material and Standard: Built for Metalworking Reliability Manufactured from HSS‑G (ground high speed steel) and produced to DIN 338, this twist drill combines sharp cutting geometry with strict dimensional tolerances. The designation HSS‑G indicates CNC grinding of the flutes, resulting in very sharp cutting edges and excellent concentricity. The Type N normal spiral profile is the classic metalworking geometry, making this drill suitable for a wide range of ferrous and non‑ferrous metals while ensuring predictable performance in workshop and industrial environments. Optimised Cutting Geometry for Hard Materials With a 135° point angle, the drill penetrates harder materials more effectively and reduces the tendency to wander at the start of the cut. This angle shortens the initial bite into the material, offering better centring and lower feed effort for materials such as alloyed and unalloyed steel, cast steels and hard plastics. The combination of point geometry and a ground flute profile also helps produce cleaner chips and improved surface finish in the drilled hole. Performance, Handling and Machine Compatibility The tool features a spiral length of 75 mm and an overall length of 117 mm paired with a fully ground shank, which improves chucking accuracy and reduces runout. Compared with conventional HSS designs, this ground HSS version can enable up to 40% faster drilling with around 50% less feed force, provided appropriate speeds and cutting fluids are used. It is intended primarily for use on drilling machines rather than solely for handheld casual use, and benefits from steady clamping and, where necessary, coolant for longer tool life. We strongly recommend the MetavCUT short HSS‑G Twist Drill Type N for demanding metalworking tasks — for expert technical advice and to confirm suitability contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 48076-FDA Type: Type N Diameter: 7.6 mm Point angle: 135° Execution: short Spiral length: 75 mm Overall length: 117 mm Shank finish: fully ground Surface finish: bright finished Material: HSS-G Standard: DIN 338 Intended for: Drilling Machine (Hand drill compatibility depends on clamping and setup) Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what are Twist Drills used? Twist Drills such as the MetavCUT Twist Drill Type N are mainly used for machining high‑strength materials and larger drill diameters; their form is easy to grind and withstands higher loads, making them particularly suitable for metalworking where robust cutting performance is required. Which three drill types exist? The three common drill types are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill category and is optimised for steel and similar materials.
7.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Type N) — Short HSS‑G, 7.7 mm, 135° tip, Bright finished, Fully ground shank, DIN 338 by MetavCUT The Twist Drill Type N short HSS‑G is a precision metal‑drilling bit designed for drilling machines and handheld drills, optimised for hard materials and stable, accurate holemaking. Short design for improved stability and precision Optimised 135° tip for hard metals and stainless steel HSS‑G fully ground for sharp edges and high runout accuracy Suitable for drilling machines and hand drills Complies with DIN 338 for short twist drills Precision and faster cuts for hard materials The bit is made from HSS‑G (high‑speed steel, ground), a material choice that provides sharp cutting edges and consistent performance when machining steel, cast iron, non‑ferrous metals and hard plastics. A fully ground geometry means the flutes and cutting lips are produced by CNC grinding, delivering very good concentricity and clean holes. The manufacturer notes up to 40% faster drilling with 50% less feed force compared with conventional HSS types, which translates into reduced operator effort and higher throughput for repetitive metalworking tasks. Stability by design: short length for precise results The short execution reduces the effective overhang and therefore bending and vibration during drilling. With a flute length of 75 mm and an overall length of 117 mm, this compact geometry increases rigidity and improves hole quality in demanding applications. The nominal 7.7 mm diameter and the Type N normal spiral make this bit particularly suitable where runout and positional accuracy matter, for instance in jigged components or light machining operations on machines and portable drills. Tip geometry tailored to tough jobs A 135° tip angle reduces the tendency to “grab” and is better adapted to harder materials such as stainless steel; a larger tip angle shortens the time to break through the material surface and improves centring for deep or difficult holes. The Type N spiral is the classic metal‑drill geometry, providing reliable chip evacuation and consistent cutting behaviour. For best results on harder alloys use steady feed, appropriate lubricant or coolant, and secure clamping to exploit the geometry’s advantages. Professional use, clear handling advice Designed for workshops, maintenance crews and production environments, the Profi Line short twist drill supports precise metalworking operations where repeatability matters. The bright finished surface aids visual inspection and handling, while the fully ground shank ensures accurate seating in chucks. Because ground HSS can be more brittle than rolled variants, using coolant and stable fixturing is recommended to avoid premature tool breakage and to maintain hole quality over time. Strongly recommended: choose MetavCUT Profi Line short HSS‑G Twist Drill for demanding metal‑drilling tasks — for technical questions or tailored advice METAV Werkzeuge offers expert consultation via email, phone or WhatsApp 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48077-FDA Type: Typ N (Type N) Diameter: 7.7 mm Tip angle: 135° Material: HSS-G Norm: DIN 338 Execution: short Spiral length (flute length): 75 mm Overall length: 117 mm Shank execution: fully ground Colour / Finish: bright finished For drilling machine: Drilling Machine / Hand drill Model series: Profi Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills such as the Twist Drill (Type N) by MetavCUT are primarily used for machining high‑strength materials and larger hole diameters; their geometry is relatively easy to regrind and they withstand higher loads, making them suitable for drilling alloyed and unalloyed steel, cast materials and hard plastics. Which three drill types exist? In practical terms the main drill categories are metal drills, wood drills and masonry/concrete drills, and the Twist Drill (Type N) by MetavCUT belongs to the metal‑drill class optimised for metalworking applications.
7.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Spiralbohrer) — HSS‑G Short, Ø 7.8 mm, 135°, Type N, Bright Finished The Twist Drill (Short Type N) is a precision HSS‑G metal drill designed for accurate machining with a 7.8 mm diameter and a 135° point angle, ideal for demanding metalworking tasks. Short HSS‑G design for higher stability 135° Point angle for hard materials Fully ground shank for precise runout Conforms to DIN 338 for consistent geometry Suited for alloyed and unalloyed steel Increased Productivity through Short Design and High Cutting Speed Designed for metalworking professionals, this short spiral cutter delivers higher stability and reduced deflection thanks to its shorter overhang. The HSS‑G grinding process produces very sharp cutting edges that allow up to 40% faster drilling with roughly 50% lower feed force compared to conventional HSS variants. This results in faster cycle times on production machines and more consistent hole quality during serial operations. Durable Material and Clear Cutting Advantages Thanks to its HSS‑G construction and CNC grinding of the flutes, the tool provides exceptional edge sharpness and running accuracy. HSS‑G (Ground High Speed Steel) combines wear resistance with the possibility of regrinding; this means less downtime for replacement and the option for refurbishment in maintenance routines. For users unfamiliar with the term, HSS‑G simply refers to a High Speed Steel drill that has been ground for superior geometry and finish, making it especially suited for hard and abrasive metals. Practical Application: Where the Short Twist Drill Excels For operations in steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics, the short twist drill is particularly beneficial. The Type N spiral (normal helix) offers a classic geometry tailored to metal drilling, ensuring reliable chip evacuation and stable penetration. This makes the bit a strong choice for stationary and portable drilling machines when precision holes in tougher materials are required. Optimised Geometry, Standards and Handling Recommendations The 135° point angle reduces initial cutting pressure and improves centring in hard materials such as stainless steel. Conformity to DIN 338 guarantees standardised lengths and shank tolerances, simplifying toolholder selection and repeatability. Because ground drills can be somewhat more brittle than roll‑formed types, coolant use and appropriate cutting speeds are recommended for prolonged life. A fully ground shank ensures minimal runout, which is essential for tight‑tolerance holes. Choose the MetavCUT Profi Line short Twist Drill for precision metalworking — for questions about suitability or further technical data, METAV Werkzeuge provides expert consultation: info@metav-werkzeuge.com · +49 2822 7131930 · WhatsApp +49 170 2837271 Bezeichnung: Twist Drill (Spiralbohrer) Marke: MetavCUT SKU: 48078-FDA Durchmesser: 7.8 mm Gesamtlänge: 117 mm Spirallänge: 75 mm Spitzenwinkel: 135° Typ: Type N Ausführung: short Schaftausführung: fully ground Farbe/Oberfläche: bright finished Material: HSS-G Norm: DIN 338 Modellserie: Profi Line Anwendung: Drills for metal Für Bohrmaschine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is the Twist Drill used? The MetavCUT Twist Drill (Short Type N) is primarily used for machining high‑strength materials and larger drill diameters; its short design and HSS‑G grinding make it suitable for precise metal drilling where stability and clean hole quality are required. Which 3 drill types exist? Common categories are Metal Drill, Wood Drill and Stone/Concrete Drill; the MetavCUT Twist Drill belongs to the Metal Drill group and is optimised for ferrous and non‑ferrous metals. Why are Twist Drills pointed? A pointed tip reduces the chisel edge at the centre, lowering friction and required feed forces; the 135° point of the MetavCUT Twist Drill improves centring and reduces entry forces in harder materials. Can a metal Twist Drill be used in wood? A metal‑type drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are typically worse than with a dedicated Wood Drill; however, metal drills are easier to regrind and show lower self‑feeding characteristics.
7.9mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
MetavCUT Twist Drill – Type N, Ø 7.9 mm, 135° Tip, HSS‑G, Short, Bright Finished, DIN 338 The MetavCUT Twist Drill is a short Type N twist drill for metalworking, offering a 7.9 mm Diameter and a 135° Tip Angle for precise drilling in hard materials on drilling machines. Short design for improved stability and precision Fully ground HSS‑G for sharpness and fast penetration 135° tip for safe centring in hard steels Conforms to DIN 338 for reliable production use Exceptional Material and Cutting Performance for Metalworking Constructed from HSS‑G and produced as a fully ground tool, this twist drill delivers consistently sharp cutting edges and high runout accuracy. The grinding process produces very fine cutting geometry, which reduces burr formation and yields clean, dimensionally accurate holes. Because of the material and finish, feed forces are lower and drilling cycles can be shorter, which directly improves productivity in workshop and production environments. The short version reduces vibration and supports repeatable results when machining alloys, cast materials, or hard plastics. Stable Short Design for Precise, Hard‑Material Drilling A shorter overall length reduces the cantilever effect, increasing stability and lowering the risk of deflection during machining. With a 135° Tip Angle, the drill enters hard materials more gradually and maintains better centring, making it particularly suitable for stainless steel and other tough alloys. This combination of geometry and shaft finish makes the tool ideal for operations where dimensional accuracy and hole quality are critical, such as jig and fixture production or precision component manufacture. Clear Application Profile and Target Users Engineered primarily as a Drill for Metal, this Type N short twist drill suits machinists, toolrooms, and industrial workshops working on lathes, milling centres, or stationary drilling machines. Its characteristics support tasks requiring clean holes in alloyed and unalloyed steel, cast steel, cast iron, sintered materials, non‑ferrous metals and engineering plastics. For engineers seeking a robust production drill that balances lifetime, regrindability and hole quality, this tool provides an effective compromise between performance and serviceability. Standards, Shank Details and Machine Compatibility Manufactured to DIN 338, the drill complies with established dimensions and tolerances for short twist drills with cylindrical shanks. The bright finished surface and the fully ground flutes ensure reliable chip evacuation when used with appropriate lubricant or coolant, especially in through‑hole drilling. The drill is designed for use in standard chucks of Drilling Machines and bench units; when used stationary with coolant and correct speeds, it provides the best combination of lifetime and hole quality. Strong recommendation: Choose the MetavCUT Twist Drill for demanding metalworking tasks and contact METAV Werkzeuge for personalised technical advice and purchasing support – eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand/Manufacturer: MetavCUT SKU: 48079-FDA Model series: Profi Line Type: Type N Diameter: 7.9 mm Spiral length: 75 mm Overall length: 117 mm Tip angle: 135° Material: HSS‑G Execution: Short (kurz) Shank finish: Fully ground (geschliffen) Colour/Surface: Bright finished (blank) For drilling machine: Drilling Machine (Handbohrmaschine) Application: Drills for metal (Bohrer für Metall) Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill (Type N) best suited for? The MetavCUT Twist Drill (Type N) is primarily intended for metalworking; its HSS‑G composition and 135° tip make it suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard engineering plastics, providing clean holes and good centring. Is coolant recommended when using the MetavCUT Twist Drill? For prolonged tool life and consistent hole quality with the MetavCUT Twist Drill, especially in hard or alloyed steels, the use of appropriate coolant or lubricant is recommended to reduce heat and improve chip evacuation. What is a Twist Drill used for? A Twist Drill is mainly applied to the machining of high‑strength materials and larger hole diameters; it is relatively easy to regrind and withstands higher loads while delivering precise holes in demanding metalworking tasks. Which three drill types are there? Common drill types are Metal drills, Wood drills and Masonry/Concrete drills.
7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Die kurze Ausführung des Spiralbohrers vereint erhöhte Stabilität durch reduzierte Auskraglänge mit der schneidstarken HSS-G-Geometrie und dem 135° Spitzenwinkel, was präzise Bohrungen in legierten und unlegierten Stählen erleichtert. Nutzen Sie die Kombination aus Robustheit, Schnittleistung und Normkonformität für zuverlässige Ergebnisse und bestellen Sie den Bohrer über Metav Werkzeuge oder fragen Sie unsere technische Beratung an. Spiralbohrer von MetavCUT — Kurzer HSS-G Metallbohrer (Typ N), 7 mm Der Spiralbohrer ist ein kurzer, geschliffener HSS-Bohrer nach DIN 338, entwickelt für präzise Metallbohrungen in Stahl, Guss und Nichteisenmetallen. Kurze Ausführung für hohe Stabilität HSS-G geschliffen für präzise Bohrlöcher Spitzenwinkel 135° für härtere Werkstoffe Zylinderschaft passend für Handbohrmaschine DIN 338 Konformität, Profi Line Qualität Präzise Führung durch geringe Auskraglänge Die kürzere Bauform reduziert die Auslenkung und steigert die Stabilität beim Bohren, wodurch saubere und maßhaltige Bohrlöcher erreicht werden. Durch die HSS-G-Fertigung ist die Schneidkante sehr scharf und die Rundlaufgenauigkeit hoch, was besonders beim Bohren in härteren Metallen wichtig ist. Anwender profitieren von weniger Vibration, geringerer Bruchanfälligkeit bei stationärem Einsatz und einer zuverlässig wiederholbaren Bohrqualität. Angepasste Geometrie für harte Werkstoffe Der 135° Spitzenwinkel sorgt für ein leichteres Eindringen in zähe Materialien und reduziert das Ausblättern am Bohrlochansatz. Die geschliffene Spiralgeometrie steigert die Spanabfuhr und ermöglicht bei richtigen Schnittwerten ein schnelleres Bohren bei geringer Anpresskraft. Typ N steht für die bewährte Normalspirale, die sich besonders für legierte und unlegierte Stähle sowie Gusswerkstoffe eignet; bei rostfreien Stählen empfiehlt sich Kühlschmierstoff zur Lebensdauerverlängerung. Einsatzbereiche und Anwendernutzen Dieses Werkzeug richtet sich an Werkstätten, Instandhaltung und professionelle Heimwerker, die Metall präzise bearbeiten wollen. Die Ausführung ist für den Einsatz an Handbohrmaschinen und stationären Maschinen geeignet; der kurze Schaft verbessert die Handhabung und die Maßhaltigkeit. Die MetavCUT Profi Line ist besonders dann vorteilhaft, wenn wiederholgenaue Ergebnisse und eine robuste Verarbeitung gefragt sind. Norm, Verarbeitung und praktische Hinweise Die Fertigung nach DIN 338 garantiert Maße und Ausführung entsprechend gängiger Industriestandards. Geschliffene Bohrer bieten hohe Schnittgüten, verlangen jedoch sorgfältige Handhabung; bei längeren Schnittzyklen empfehlen sich stationäre Aufnahmen und Kühlung. Zur Präzisionssteigerung kann vorgepunktet oder ein Zentrierbohrer eingesetzt werden, vor allem bei anspruchsvollen Passungen. Setzen Sie auf die Profi Line von MetavCUT und fordern Sie Ihr Angebot direkt per E‑Mail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 an — schnelle Lieferung ab Emmerich und fachkundige Beratung inklusive Produktmerkmale Artikelnummer: 48070-FDA Marke: MetavCUT Serie: Profi Line Fakten Durchmesser: 7 mm Gesamtlänge: 109 mm Spirallänge: 69 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Norm: DIN 338 (Kurzspiralbohrer mit Zylinderschaft) Typ: Typ N (Normalspirale, für Metall) Schaft Ausführung: geschliffen Farbe: blank (bright finished) Ausführung: kurz Für Bohrmaschine: Handbohrmaschine FAQ Was unterscheidet diesen Bohrer von Standardspiralbohrern? Der Spiralbohrer von MetavCUT aus der Profi Line zeichnet sich durch die kurze Ausführung und die geschliffene HSS-G-Geometrie aus; dadurch erhöht sich die Stabilität und die Bohrleistung in harten Werkstoffen im Vergleich zu längeren Standardbohrern. Eignet sich der Bohrer für Edelstahlarbeiten? Ja, der Bohrer mit 135° Spitzenwinkel und HSS-G-Material ist für härtere Werkstoffe wie Edelstahl geeignet; bei rostfreien Stählen wird jedoch die Verwendung von Kühlschmierstoff empfohlen, um Standzeit und Schnittverhalten zu verbessern. Kann ich den Bohrer in einer Handbohrmaschine verwenden? Der Spiralbohrer ist für den Einsatz an Handbohrmaschinen geeignet und verfügt über einen geschliffenen Zylinderschaft; bei höherer Präzision empfiehlt sich jedoch die Aufnahme in eine stationäre Maschine. Welche Vorteile bietet die Fertigung nach DIN 338? Die DIN 338 stellt sicher, dass Abmessungen, Schaftform und Ausführung den Industriestandards entsprechen; das erleichtert die Austauschbarkeit und gewährleistet konstante Qualität bei den MetavCUT Profi Line Spiralbohrern (SKU 48070-FDA).
8.1mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
MetavCUT Twist Drill — Short HSS‑G Twist Drill (Ø 8.1 mm, 135° Tip, Type N, Bright Finished, DIN 338) The MetavCUT Twist Drill is a short Type N Twist Drill designed for precision metalworking, offering a bright finished surface and a 135° tip for improved entry into hard materials. Short HSS-G design for increased stability 8.1 mm diameter for precision metal drilling 135° tip for harder materials like stainless steel Fully ground shank for high concentricity Compliant with DIN 338 for short Twist Drills Stability and faster drilling for demanding metalwork Short design combined with HSS‑G grinding provides tangible advantages in daily workshop use. The reduced overhang reduces vibration and bending so that drilling stays precise even under higher loads. Because the Flute Geometry is CNC‑ground, the drill cuts with sharply defined edges; this results in up to 40% faster drilling and requires about 50% less thrust than comparable conventional HSS tools, which reduces operator fatigue and machine wear. Users benefit from cleaner holes and improved tool life when used with appropriate cooling. Reliable performance in hard and alloyed steels A 135° Tip reduces the tendency to wander on hard surfaces and shortens the initial drilling time for tougher materials such as Stainless Steel and alloyed Steels. As a Type N normal‑spiral Twist Drill, this tool is optimised for Metal applications and provides consistent chip evacuation under typical machining conditions. Compliance with DIN 338 ensures that dimensions and tolerances match workshop expectations for short Twist Drills, making the drill an efficient choice for production and repair tasks where reproducible results matter. Built for precision and concentricity The Fully Ground Shank and accurate manufacturing in the Profi Line series deliver high concentricity at the chuck. This construction minimises runout and produces rounder, more accurate holes when compared to rolled alternatives. For work on stationary or mobile machine tools, the short overall length improves rigidity and gives craftsmen more control during finishing and reaming operations. For those who recondition tools, the ground geometry is also simpler to resharpen while maintaining cutting accuracy. Practical guidance and application areas This Twist Drill has been developed primarily for drilling in a range of metals including alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron and Non‑Ferrous Metals, as well as Hard Plastics. The short flute length (Spiral Length 75 mm) and total length of 117 mm make it especially suitable for precision work on machine tools and hand drills where stability is essential. If unsure whether this drill meets a specific application, METAV Werkzeuge offers expert consultation to advise on performance, cooling strategy and feed rates. Why choose this short Profi Line Twist Drill Manufacturing choices such as the grinding process (HSS‑G) result in sharper cutting edges and superior running accuracy. That precision translates into fewer rejects, less rework and a measurable increase in productivity in workshop environments. For operators facing frequent drilling in harder materials, the combination of Short Design and 135° Tip delivers a practical balance of durability and cutting performance without sacrificing control. Strong recommendation: Choose the MetavCUT Profi Line Short Twist Drill for precision metal drilling and contact METAV Werkzeuge for tailored technical advice via email (info@metav-werkzeuge.com), phone (+49 2822 7131930) or WhatsApp (+49 170 2837271) Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 48081-FDA Model Series: Profi Line Type: Typ N Diameter: 8.1 mm Spiral Length: 75 mm Overall Length: 117 mm Tip Angle: 135° Material: HSS-G Execution: short Shank Execution: fully ground Colour: bright finished For Drill Machine: Drilling Machine Norm: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the main advantage of a short Twist Drill like the MetavCUT Twist Drill? A short Twist Drill such as the MetavCUT Twist Drill offers greater stability and less tendency to bend, which improves precision when drilling hard materials; the reduced overhang also means cleaner holes and more consistent results on machine tools. Is the MetavCUT Twist Drill suitable for stainless steel and hardened material? Yes, the MetavCUT Twist Drill with its 135° Tip and HSS‑G geometry is particularly suited to harder Materials including Stainless Steel; the tip angle shortens entry time and the ground flutes maintain sharpness for effective cutting. What are Twist Drills used for? Twist Drills are mainly used for machining high‑strength materials and for larger drill diameters. The shape is easy to resharpen and withstands greater loads, making it suitable for demanding metalworking tasks. Which three drill types exist? The three common drill types are Metal Drills, Wood Drills and Stone/Concrete Drills. Why are Twist Drills pointed? Pointing reduces the chisel edge at the tip of the Twist Drill. Pointing decreases friction forces, which lowers the required feed force and helps the drill to centre more reliably in the workpiece. Can a metal drill be used in wood? A Metal Drill can be used in Wood, but guidance is reduced and the hole finish is usually not as clean. Metal Drills are easier to resharpen and typically have less self‑feeding tendency than dedicated wood drills. For which drilling depths is the Twist Drill most commonly used? A through hole is typically made with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The common assumption that HSSE is always superior to HSS is not universally correct. When choosing between HSS and HSSE, evaluate whether your working conditions justify the higher cost of HSSE.
8.2mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill – Short HSS‑G, Ø 8.2 mm, 135° (Type N), Bright Finished The Twist Drill is a short Type N HSS‑G drill designed for precision metalworking with Drilling Machines such as hand and stationary units, ideal where stability and clean holes are required. Short design for higher stability and precision HSS‑G fully ground for sharp, accurate holes 135° tip for hard materials like stainless steel Suitable for Drilling Machines and stationary use Conforms to DIN 338 for short twist drills High performance for demanding metal drilling Short HSS‑G geometry delivers a direct performance advantage: the short design reduces overhang and therefore deflection, improving hole accuracy under load. The fully ground cutting geometry enables up to 40% faster drilling and requires around 50% less feed force compared with conventional HSS cutters, which is especially beneficial when working with alloyed and unalloyed Steel, Cast Iron, Sintered Iron or Hard Plastics. The 135° tip reduces walking on hard surfaces and shortens plunge time, so production cycles become more efficient while maintaining repeatable results. Precision manufacturing and what “fully ground” means for you A fully ground or HSS‑G tool is produced by CNC grinding rather than roll forming. This process yields very sharp cutting edges and high concentricity, leading to clean, precise bores and excellent roundness. Such advantages suit precision drillwork but also call for appropriate handling: ground drills can be more brittle than rolled types, so cooling and controlled feed are advised to prevent breakage and extend tool life. Compliance with DIN 338 ensures the drill matches the expected dimensions and tolerances for short twist drills with cylidrical shanks. Who benefits and where to use it Workshops, metal fabricators and maintenance engineers profit most from this short drill: it is tailored for operations requiring accurate holes in hard materials and where machine stability is limited. With a spiral length of 75 mm and an overall length of 117 mm combined with a Ø 8.2 mm core, the tool is particularly suited to drilling in confined setups or on compact Drilling Machines, where reduced overhang improves process reliability. The Type N normal spiral is the classic choice for metal applications, giving robust chip evacuation and general-purpose versatility. Practical handling tips for longer tool life To get the best from this Profi Line HSS‑G twist drill, use moderate cutting speeds for stainless and hard steels and ensure adequate coolant or lubrication during operation. Short drills tolerate higher feeds thanks to reduced bending moments, but avoid heavy side loads. If re‑sharpening is required, maintain the original 135° tip geometry to preserve centring behaviour and reduce thrust. Regular inspection for wear at the margin and lip relief keeps hole quality consistent and reduces scrap. Strong recommendation: Choose MetavCUT Profi Line short HSS‑G Twist Drills for precision metalworking and contact METAV Werkzeuge for tailored technical advice and application support — Email: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 48082-FDA Type: Type N Diameter: 8.2 mm Point angle: 135° Material: HSS‑G Execution: Short Finish/Colour: Bright finished Shank finish: Fully ground Spiral length: 75 mm Overall length: 117 mm For Drilling Machine: Drilling Machine (Hand Drilling Machine) Norm: DIN 338 Model series: Profi Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is the Twist Drill used? The Twist Drill from MetavCUT (Type N) is mainly applied for machining high‑strength materials and larger drill diameters; its geometry and grinding make it suitable for demanding metalwork where clean, precise holes are required and where the tool must withstand higher loads. Which 3 drill types exist? Common basic categories are Metal drills, Wood drills and Masonry/Concrete drills; the MetavCUT Twist Drill (Type N) belongs to the metal drill family and is optimized for metal applications. Why are twist drills pointed? The point grind on a MetavCUT Type N Twist Drill reduces the cross‑cut at the tip, which lowers friction so that less thrust is needed; additionally, a correctly ground tip improves centring and reduces walking on the workpiece. Can the Twist Drill be used for wood? A metal drill such as the MetavCUT Type N Twist Drill can be used in wood, but guidance and finish are usually inferior to dedicated wood drills; metal drills are easier to re‑sharpen and have lower self‑feeding tendency, yet they may not give as clean a hole as a wood‑specific bit.
8.3mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Die Kombination aus HSS-G-Material, kurzer Ausführung und 135° Spitzenwinkel ermöglicht schnelle, präzise Bohrungen in Stahl und Guss. Bestellen Sie den Spiralbohrer direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT, Profi Line Spiralbohrer in kurzer Ausführung für präzise Metallbohrungen an stationären Maschinen und Handbohrmaschine. HSS‑G geschliffen für präzise Schnitte Kurze Ausführung reduziert Vibrationen 8,3 mm Durchmesser für Standardanwendungen 135° Spitzenwinkel für harte Werkstoffe Verpackungseinheit 5 Stück Haltbarkeit und Schneidleistung für anspruchsvolle Stahlarbeiten Der geschliffene HSS‑G-Werkstoff sorgt für eine sehr scharfe Schneidkante und hohe Rundlaufgenauigkeit, was saubere Bohrlöcher in legierten und unlegierten Stahl fördert. Dank der kurzen Auskraglänge ist die Stabilität erhöht und die Neigung zum Verbiegen reduziert, wodurch weniger Nacharbeit erforderlich wird. Die angegebene Leistungssteigerung von bis zu 40 % schnellerem Bohren und bis zu 50 % geringerer Anpresskraft macht sich besonders bei wiederkehrenden Metallbohrungen bemerkbar und erleichtert den Arbeitsablauf in der Werkstatt. Präzision, Norm und empfohlene Einsatzbedingungen Die DIN 338-Konformität kennzeichnet die Ausführung als kurzen Spiralbohrer mit Zylinderschaft und ist besonders geeignet für Anwendungen im Standard‑Bereich. Mit dem 135° Spitzenwinkel und der Normalspirale Typ N eignet sich der Bohrer für Gusseisen, Temperguss und Hartkunststoff ebenso wie für diverse Stahlgüten. Für höchste Genauigkeit empfiehlt sich ein Anpunkten mit einem Zentrierbohrer und die Verwendung von Kühlschmierstoff bei stationärer Bearbeitung, um Standzeit und Bohrbild weiter zu verbessern. Handhabung, Maschinenanbindung und Sicherheitshinweise Die kurze, geschliffene Ausführung passt gut in Handbohrmaschine und stationäre Bohrmaschinen, reduziert Schwingungen und verbessert die Führung des Bohrers. Wegen der erhöhten Sprödigkeit geschliffener Bohrer empfiehlt sich kontrollierte Vorschubkraft und ausreichende Kühlung, besonders bei tiefen Bohrungen; bei tieferen Löchern sind abgestufte Vorbohrungen ratsam. Die Lieferung erfolgt in Sets zu 5 Stück, sodass der Vorrat für Serienarbeiten schnell wieder aufgefüllt werden kann. Empfehlung: Für präzise Metallbohrungen die Profi Line Spiralbohrer von MetavCUT verwenden und bei technischen Fragen den technischen Vertrieb kontaktieren: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Produktmerkmale Artikelnummer: 48083-FDA Marke: MetavCUT Serie: Profi Line Produkttyp: Spiralbohrer Norm: DIN 338 Fakten Durchmesser: 8,3 mm Gesamtlänge: 117 mm Spirallänge: 75 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Stück Besonderheiten Material: HSS‑G (Schnellarbeitsstahl, geschliffen) Schaftausführung: geschliffen (voll geschliffener Zylinderschaft) Ausführung: kurz (reduzierte Auskraglänge) Typ: Typ N (Normalspirale, Metall) Farbe: blank (bright finished) Für Bohrmaschine: Handbohrmaschine FAQ Für welche Materialien eignet sich der Spiralbohrer am besten? Der Spiralbohrer von MetavCUT Profi Line ist besonders geeignet für legierte und unlegierte Stahl-Arten, Gussstahl, Gusseisen, Temperguss, Nichteisenmetalle und Hartkunststoff; die geschliffene Geometrie liefert saubere Bohrbilder bei diesen Werkstoffen. Ist der Spiralbohrer für Handgeführte Maschinen geeignet? Ja, der Spiralbohrer in kurzer Ausführung eignet sich für Handbohrmaschine und stationäre Maschinen; bei handgeführtem Einsatz ist auf stabile Führung und angemessene Drehzahl zu achten, um Bruchrisiken zu minimieren. Welche Vorteile bietet der 135° Spitzenwinkel? Der 135° Spitzenwinkel reduziert das Auswandern beim Anbohren und ist vorteilhaft bei härteren Werkstoffen, da er die Anbohrzeit verkürzt und eine gleichmäßigere Spanbildung ermöglicht. Wie viele Bohrer sind in der Verpackungseinheit enthalten? Die Verpackungseinheit enthält 5 Stück; die Artikelnummer lautet 48083-FDA und die Marke ist MetavCUT. Was bedeutet HSS‑G geschliffen und welche Pflegehinweise gibt es? HSS‑G steht für geschliffenen Schnellarbeitsstahl, der sehr scharfe Kanten und hohe Präzision bietet; wegen erhöhter Sprödigkeit sollte Kühlung verwendet und zu hohe Vorschubkräfte vermieden werden.
8.4mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Type N — 8.4 mm, 135°, short, bright finished, HSS‑G, DIN 338 (MetavCUT) A Twist Drill Type N designed for precise metalworking, ideal for Drilling Machines where stability and clean holes are required. Short Twist Drill Type N 8.4 mm diameter 135° point for harder materials like stainless steel HSS‑G ground for sharp cutting and fast drilling Fully ground shank for high concentricity and stability Complies with DIN 338 for short cylinder shanks High cutting performance for demanding metal jobs The HSS‑G composition and ground geometry deliver a clear benefit: faster, cleaner drilling with less operator effort. This short design reduces the exposed length and therefore the tendency to bend, so users achieve precise holes even in tough materials. For professionals working with alloyed or unalloyed Steel, Cast Steel and Hardened Plastics, the result is a higher first‑pass success rate and reduced rework time. Stable handling and improved concentricity for machine use Because the shank is fully ground, the bit runs truer in the chuck, which directly reduces runout and improves hole accuracy. The reduced vibration also extends tool life and lowers the risk of breakage during stationary or portable drilling operations. This is particularly valuable when drilling on a Drilling Machine under feed and coolant, where consistent concentricity matters. Geometry designed for hard materials and precise starts A 135° point angle shortens the initial penetration time on harder workpieces and helps to centre the bit without wandering. The Type N normal spiral profile is optimised for metalworking and provides reliable chip removal while maintaining cutting edge stability. For less experienced users: a larger point angle means easier start and less burr formation on the exit side. Short length advantage and recommended applications The short overall length increases rigidity, which lowers the chance of deflection and improves surface finish in the hole. This makes the bit especially suitable for precise workshops and production runs where repeatability is required. Typical applications include drilling in Steel, Cast Iron, Sintered Materials and Non‑Ferrous Metals where high accuracy and clean bores are demanded. Target user and usage tips Designed for machinists, toolroom personnel and serious hobbyists, this HSS‑G short twist drill suits situations where stability and hole quality are priorities. For best results, use appropriate cutting fluid and moderate feed rates; because ground bits can be more brittle than rolled alternatives, avoid excessive side loads and prefer stationary machines or rigid setups. Strong recommendation: Choose MetavCUT’s short Twist Drill Type N when demanding metalworking requires high precision and reliable performance — for further technical advice or to confirm suitability for a specific task, METAV Werkzeuge provides expert consultation via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 48084-FDA Diameter: 8.4 mm Overall length: 117 mm Spiral length: 75 mm Point angle: 135° Type: Type N Execution: short Finish: bright finished Material: HSS-G Shank: fully ground For drilling machine: Drilling Machine Series: Profi Line Application: Drills for metal Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills such as the MetavCUT Twist Drill Type N are mainly applied to the machining of high‑strength materials and larger drill diameters; their form is easy to sharpen and they withstand heavy loads, making them ideal for demanding metal drilling tasks. Which three drill types exist? The three primary drill categories are metal drills, wood drills, and masonry/concrete drills. Can the MetavCUT Twist Drill Type N be used in wood? A metal Twist Drill can be used in Wood, but guidance and finish are generally inferior compared with dedicated wood bits; metal drills are easier to resharpen and show less self‑feeding, so results may be acceptable for non‑critical tasks. At which drilling depths is a Twist Drill most commonly used? A Twist Drill is the most frequently used tool for through drilling; it is common for diameters up to 20 mm and drilling depths up to 100 mm, especially for stable, full‑section bores in metal.
8.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Type N) — Short HSS‑G Metal Drill, Ø 8.5 mm, 135° The Twist Drill (Type N) is a short, bright‑finished HSS‑G drill designed for precision metalworking in drilling machines and hand drills. Short design for high stability and precision HSS‑G ground tip for clean, accurate holes 135° tip angle optimised for hard materials Fully ground shank for excellent concentricity Conforms to DIN 338 for short twist drills Precision and faster penetration in hard metals The Profi Line short Twist Drill brings measurable efficiency to metalworking: the HSS‑G ground geometry reduces required feed force and enables up to 40% faster drilling compared with conventional HSS types. With a 135° tip angle, the drill enters hard materials more smoothly and reduces wandering on the surface, so one clean, centred hole is achieved with less rework. This results in time savings and improved process reliability for daily workshop tasks. Greater stability and reduced deflection during drilling A reduced overall projection improves stiffness: the short execution (total length 117 mm, spiral length 75 mm) minimises bending and vibration when compared with longer drills. The shorter overhang leads directly to better hole accuracy and longer tool life in many setups. The fully ground shank ensures reliable clamping and concentricity in standard drill chucks and machine spindles, lowering runout and improving surface quality of the bore. Designed for a wide range of metalworking applications This Twist Drill (Type N) is tailored for demanding tasks: ideal for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. The normal spiral geometry of Type N provides a balanced chip evacuation and cutting action suited to general metal drilling. Use in stationary drilling machines or appropriately rated hand drills delivers consistent results when standard cooling and speeds for the material are observed. Manufacturing standard, sharpening and recommended handling Manufactured to DIN 338, the drill is produced with CNC grinding of the flute geometry (HSS‑G), which gives very sharp cutting edges and a high degree of concentricity. Ground drills can be more brittle than rolled variants; therefore, application with coolant and controlled feeds is recommended to avoid breakage. For maintenance, regrind the lip and chisel edge respecting the original 135° tip to retain centring performance and chip formation characteristics. Who benefits from this Profi Line Twist Drill Workshop professionals and maintenance technicians who require fast, precise holes in tough materials will value the combination of short design and ground HSS quality. The tool is particularly useful where repeatable accuracy and reduced setup time matter, for example in toolrooms, small series production or repair work. METAVCUT’s specification focuses on dependable performance for metalworking environments. Strong recommendation: choose the MetavCUT Profi Line Twist Drill for precision metal drilling — for expert technical advice contact METAV Werkzeuge via eMail info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 48085-FDA Diameter: 8.5 mm Tip angle: 135° Type: Type N Material: HSS‑G (ground high speed steel) Execution: short Spiral length: 75 mm Overall length: 117 mm Shank finish: fully ground Colour: bright finished Intended for: Drilling Machine / Hand Drill Norm: DIN 338 Model series: Profi Line Applications: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Profi Line Twist Drill mainly used for? The MetavCUT Profi Line Twist Drill (Type N) is primarily used for drilling into high‑strength and hard metals; it performs especially well in alloyed and unalloyed steel, cast iron and similar materials where a durable, accurate hole is required. Can the MetavCUT Profi Line Twist Drill be used in a hand drill? Yes, the MetavCUT Profi Line Twist Drill can be used in suitably rated hand drills as well as in stationary drilling machines, provided the chuck secures the fully ground shank correctly and recommended speeds and cooling are applied. For what is a Twist Drill used? A Twist Drill is mainly applied to the machining of high‑strength workpieces and larger drill diameters. This shape is easy to sharpen and withstands higher loads. Which three drill types exist? There are three primary drill categories: Metal Drill, Wood Drill, and Stone/Concrete Drill. Why are Twist Drills sharpened? Sharpening reduces the cross‑edge at the tip of the Twist Drill, significantly lowering friction so that less feed force is needed and the tip centres more reliably in the workpiece. Can a metal drill be used to drill wood? A metal drill can be used in wood, but guidance is poorer and the finish is less clean; however, these drills are easier to re‑sharpen and have lower self‑feed tendency. At which drilling depths is the Twist Drill the most used tool? A through‑hole in solid material is commonly executed with a Twist Drill. For diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The widespread belief that HSSE is always superior to HSS is not universally true. Evaluate working conditions carefully to determine whether the higher cost of HSSE is justified for your application.
8.6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short HSS-G Twist Drill Ø 8.6 mm · 135° tip · Type N · Bright Finished · Fully Ground Shank · DIN 338 · MetavCUT Profi Line The Twist Drill short Type N is a precision drill for metalworking, designed for stable, accurate holes in hard and alloyed steels with its 135° tip. Short design for increased stability and precision HSS‑G ground for clean, accurate hole quality 135° tip optimised for hard and stainless steels Fully ground shank for excellent concentricity Complies with DIN 338 for short twist drills Greater Stability for Precise Metal Drilling This short Twist Drill delivers enhanced stability thanks to its reduced overhang and compact overall length. The short flute length reduces bending and vibration, which results in sharper, more concentric holes and longer tool life when used under appropriate conditions. For work on milling or drilling machines where rigidity matters, the compact design significantly improves repeatability and reduces the risk of wander in tough materials. Faster Cutting with Lower Feed Forces The specially ground HSS‑G geometry is engineered to cut more efficiently: the manufacturer reports up to 40% faster drilling and approximately 50% reduced feed force compared with conventional HSS variants. The 135° tip shortens initial bore time in harder metals and helps maintain the centre, while the ground cutting lips deliver a clean chip flow and reduced heat generation during operation. Built for Metalworking: Materials and Use Cases This Type N short twist drill is intended primarily for metal applications, including alloyed and unalloyed steels, cast steels, cast iron, sintered iron, non‑ferrous metals and hard plastics. Its bright finished surface and fully ground shank make it particularly suitable for stationary and machine‑based drilling, where precision and surface quality of the hole are priorities. Typical users are toolrooms, metal workshops and maintenance departments requiring reliable performance in demanding materials. Precision Manufacturing and Practical Considerations Manufactured to DIN 338 standards, the drill is produced by grinding the flutes (HSS‑G), yielding very sharp cutting edges and excellent runout accuracy. The fully ground cylindrical shank ensures secure clamping and minimal runout in the chuck. Note that ground HSS drills can be comparatively brittle; for best results, use appropriate coolant, moderate speeds and the support of a rigid machine setup to avoid premature breakage. Highly recommended: Choose the MetavCUT short Twist Drill for demanding metalworking tasks — for technical questions or to confirm suitability for your application, contact METAV Werkzeuge for expert advice via email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or on WhatsApp at +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48086-FDA Type: Type N (Normal spiral) Diameter: Ø 8.6 mm Spiral (flute) length: 75 mm Overall length: 117 mm Tip angle: 135° Material: HSS‑G (ground high‑speed steel) Shank: Fully ground (geschliffen) Finish: Bright finished Execution: Short (kurz) Standard: DIN 338 Application: Drills for metal For drilling machine: Drilling Machine (Handbohrmaschine) Model series: Profi Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the MetavCUT Twist Drill Type N machine reliably? The MetavCUT Twist Drill Type N is suitable for a wide range of metals, including alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics; its HSS‑G ground geometry is optimised for clean holes in demanding materials. For what is a Twist Drill used? A Twist Drill is primarily used for machining high‑strength materials and larger diameters; its form is easy to sharpen and it withstands considerable loads, which makes it a common choice for drilling in metal and other demanding applications. Which three drill types exist? The three main drill types are metal drills, wood drills and stone/concrete drills, each designed with geometries and materials matched to the intended workpiece.
8.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Introducing Twist Drill — MetavCUT short Type N, 8.7 mm, 135°, HSS‑G, DIN 338, bright finished The Twist Drill is a short Type N HSS‑G drill designed for precise metalworking in drilling machines and hand drills, optimised for hard materials and industrial use. Short design for enhanced stability and accuracy HSS‑G material for sharp, long‑lasting edges 135° tip angle for hard materials and stainless steel Fully ground shank for high concentricity Conforms to DIN 338 for consistent quality Faster, more stable drilling in demanding metalwork A short, fully ground HSS‑G drill blank delivers a tangible productivity gain when machining metal. The reduced overhang improves rigidity, which means less vibration and cleaner holes even in tougher alloys. For shop floors and maintenance work where repeatable accuracy matters, this short configuration reduces the risk of runout and tool deflection, translating into fewer reworks and more consistent component fit. Optimised tip geometry for hard materials The 135° tip angle and Type N spiral geometry are chosen to reduce initial cutting forces and improve centring in metals such as alloyed and unalloyed steel. This makes the tool particularly effective when starting holes in stainless steel or cast components. The broader tip reduces the tendency to "grab" while the flute geometry efficiently evacuates chips, so feed rates can be maintained with lower thrust force. Built for professional applications and precise results Designed under DIN 338 as a short twist drill, this component suits stationary and portable drilling machines where precision counts. The combination of HSS‑G metallurgy and CNC grinding yields very sharp cutting edges and high concentricity, producing burr‑reduced holes. Use coolant for longer life during deep or continuous drilling to avoid thermal softening. Who benefits from this short twist drill This tool is aimed at machinists, toolroom technicians and maintenance engineers requiring reliable metal drilling performance. The robust construction and Type N cutting geometry make it suitable for a wide range of metals, including cast iron and non‑ferrous alloys. Where compact setup or limited reach reduces leverage, the short design supports steadier machining and repeatable tolerances. Practical handling and drilling recommendations For best results, clamp workpieces securely and select appropriate spindle speed for an 8.7 mm diameter HSS‑G drill in metal. Apply moderate feed to allow the cutting lips to engage and use coolant where possible to extend tool life. Re‑sharpening is feasible for ground drills but must be performed carefully to preserve geometry. The short flute length of 75 mm and overall length of 117 mm make this drill practical for most bench and machine setups. Strongly recommended: Choose MetavCUT when precision and stability are required — METAV Werkzeuge offers expert advice on matching this tool to your machining setup, including speed and coolant recommendations. For personal assistance contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com or by phone +49 2822 7131930; WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48087-FDA Type: Type N Diameter: 8.7 mm Spiral length: 75 mm Overall length: 117 mm Tip angle: 135° Material: HSS‑G Shank finish: Fully ground Execution: Short Colour: Bright finished Application: Drills for metal Standard: DIN 338 Model series: Profi Line For drilling machine: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit this MetavCUT Type N short drill? The MetavCUT Twist Drill Type N is primarily used for metalworking and is suited to alloyed and unalloyed steels, cast iron, non‑ferrous metals and hard plastics; its short, rigid form and 135° tip make it especially effective for precise drilling in hard materials. Which three drill types exist and where does the MetavCUT Type N belong? There are three common drill categories: metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Type N is a metal drill designed for professional machining of metals and belongs to the classic metal drill category.
8.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill short HSS-G Type N — Ø 8.8 mm, 135° tip, Bright Finished, DIN 338 The Twist Drill short HSS-G Type N is a precision metal‑drilling tool designed for use in Drilling Machines, offering high stability and fast cutting performance for hard materials. Short design for improved stability Ø 8.8 mm for precise metal holes 135° tip for hard materials like stainless steel HSS‑G fully ground for sharp cutting edges Conforms to DIN 338 for consistent accuracy Faster, cleaner metal drilling with measurable efficiency The short Twist Drill from MetavCUT combines a compact geometry with a HSS‑G ground flute to deliver up to 40% faster drilling and 50% less feed force compared with conventional HSS variants. This efficiency reduces operator effort and machine load, making the tool particularly advantageous for repetitive metalworking tasks. The reduced overhang lowers vibration and increases Precision, resulting in cleaner hole walls and less burr formation. Reliable performance in hard and alloyed metals Designed as a Type N normal‑spiral drill, this short twist drill is optimised for a wide range of metallic materials: legiertem und unlegiertem Stahl, Gussstahl, Gusseisen, Temperguss, Nichteisenmetalle and hard plastics. The 135° tip angle shortens entry time and improves centring in tougher workpieces, so fewer dwell corrections are needed. For users with limited experience, this means more consistent results when working with challenging materials. Precision geometry and fabrication for professional results The tool is manufactured according to DIN 338 as a short twist drill with a cylindrical shank. The fully ground flute geometry (HSS‑G) ensures razor‑sharp cutting edges and excellent runout accuracy, which benefits machining centres and manual setups alike. Ground drills deliver very clean holes and high repeatability; however, they require appropriate coolant and controlled feed to avoid chipping under heavy intermittent loads. Compact design that expands machine compatibility With a spiral length of 75 mm and overall length of 117 mm, the short execution reduces cantilever and enhances stability in the chuck. This compactness makes the drill well suited for use in Drilling Machines where rigidity and minimal deflection are critical. The bright finished surface aids chip evacuation and inspection, while the cylindrical shank fits standard chucks reliably. Practical guidance for safe and effective use When working with harder alloys, prefer moderate speeds and steady feed to leverage the 135° geometry. Use cutting fluid for prolonged tool life and improved surface finish. The short design is ideal for setups where overhang must be minimised; for very deep holes beyond the spiral length, choose an appropriately longer tool. For specific machining parameters or support with selection, METAV Werkzeuge offers comprehensive advice and technical consultation. Strong recommendation: For precise metalworking choose the MetavCUT short HSS‑G Twist Drill Type N for its superior stability and cutting efficiency — for technical questions or personalised advice contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 48088-FDA Type: Type N Diameter: 8.8 mm Tip angle: 135° Material: HSS-G Norm: DIN 338 Execution: short Spiral length: 75 mm Overall length: 117 mm Shank finish: fully ground Colour/Finish: bright finished Application: Drills for metal Model series: Profi Line For Drilling Machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which tasks suit the MetavCUT Twist Drill short HSS‑G Type N best? The MetavCUT Twist Drill short HSS‑G Type N is mainly applied to the machining of high‑strength materials and larger drill diameters; its short form is easy to regrind and withstands higher loads, making it especially suitable for precise metalworking and demanding industrial applications. Which three drill types are commonly available? The three principal drill categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for drilling in a variety of metals.
8.9mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
MetavCUT Twist Drill (Type N) — Short HSS‑G, Ø 8.9 mm, 135° Tip, Bright Finished, DIN 338 A MetavCUT Twist Drill (Type N) for precise metalworking, optimised for use with a Drilling Machine and handheld drills where stability and clean holes are essential. Short design for increased stability and precision Fully ground shank for high runout accuracy 135° tip angle for hard materials HSS‑G material for fast, precise metal drilling Conforms to DIN 338 for standardised performance Short length for greater accuracy and less deflection A shorter overall length reduces the exposed Cantilever and therefore the tendency to bend during drilling. The MetavCUT short Twist Drill combines a reduced Spiral Length with a robust geometry to deliver higher stability and repeatable hole accuracy. For workshop applications this means fewer reworks and tighter tolerances, especially when working with hard materials where tool chatter normally degrades the hole quality. Sharper geometry lowers feed forces and boosts speed The HSS‑G (ground high speed steel) geometry and a 135° tip are tailored to penetrate tougher metals with less effort. The grinded flute profile produces very sharp cutting edges and better centring, so drilling can be up to 40% faster and requires significantly lower Feed Force compared with conventional HSS bits. Type N normal spiral makes this bit especially suitable for steels, cast materials and non‑ferrous metals while maintaining clean, burr‑reduced holes. Engineered for metalworking and standardised reliability Manufactured to DIN 338 the short Twist Drill is specified for metal applications on stationary and portable drilling equipment. It excels in drilling alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non‑ferrous metals and hard plastics. Conformance to the norm ensures consistent dimensions, shank fit and performance across batches, simplifying tool selection and inventory for professional workshops. Practical handling and care for longer tool life Fully ground flutes and a bright finished surface aid chip evacuation and improve runout precision, but ground HSS can be more brittle than rolled variants. Use coolant for extended life when drilling deep or hard materials and avoid excessive lateral forces; stationary drilling with appropriate clamping yields the best results. For handheld operations the short design reduces vibration and improves control, while occasional resharpening restores edge quality if needed. We recommend the MetavCUT Profi Line short HSS‑G Twist Drill as the professional choice for precision metal drilling — for expert advice and technical support contact METAV Werkzeuge: info@metav-werkzeuge.com · Tel +49 2822 7131930 · WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48089-FDA Diameter: 8.9 mm Overall Length: 117 mm Spiral Length: 75 mm Tip Angle: 135° Type: Type N Execution: short Shaft Finish: fully ground Surface Colour: bright finished Material: HSS‑G Standard: DIN 338 For Use With: Drilling Machine (Handbohrmaschine) Model Series: Profi Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ How well does the MetavCUT Twist Drill Type N perform in stainless and hard steels? The MetavCUT Twist Drill Type N with a 135° tip and HSS‑G ground geometry is designed to reduce Anbohrzeit and improve centring in harder materials; it provides faster penetration and cleaner holes in stainless and alloyed steels when used with appropriate coolant. Can the MetavCUT Twist Drill Type N be used in a handheld drill? Yes, the short design of the MetavCUT Twist Drill Type N improves stability and control in a Hand Drill, making it suitable for many on‑site and workshop tasks; however, for maximum tool life and precision, stationary drilling and cooling are recommended. What are Twist Drills used for? Twist Drills are used primarily for machining high‑strength materials and larger diameters; they are relatively easy to resharpen and withstand higher loads. The short version is particularly suited to precision work in steels and other hard materials. Which three drill types exist? The three main drill types are metal drills, wood drills and stone/concrete drills.
8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short Type N, 8 mm · 135° Tip · Bright Finished · HSS-G · DIN 338 by MetavCUT The Twist Drill is a short Type N metalworking drill designed for precision drilling in steels and other hard materials with Drilling Machines. Short HSS-G body for increased stability 135° tip for clean entry in hard materials Fully ground shank for precise chucking Conforms to DIN 338 for consistent dimensions Bright finished surface for smooth chip evacuation Greater Stability and Faster Drilling for Metalworking Short design and HSS-G construction make this twist drill ideal where rigidity matters. Because the overall protrusion from the chuck is reduced, the tool shows less deflection under load, resulting in straighter holes and longer tool life when used correctly. The inherent material properties of HSS-G allow higher cutting speeds compared with conventional HSS, which translates into faster hole making and reduced machining time. For workshop and production environments this means fewer rejects and more consistent process control. Precise Entry and Reduced Burrs with a 135° Tip A 135° point angle significantly improves centring and reduces the tendency to wander on tougher surfaces. This geometry lowers the radial forces during entry, which decreases burr formation and the need for secondary deburring operations. In practice, the Type N spiral geometry combined with the larger tip angle is particularly suited to stainless steels and tempered alloys where a sharper angle would blunt quickly. For engineers and tradespeople, this results in more reproducible hole quality in demanding materials. Exact Fit and Reliable Performance from the Fully Ground Shank The fully ground cylindrical shank ensures superior concentricity in the chuck, improving runout and surface finish of the drilled hole. The fully ground shank also simplifies regrinding and refurbishment, keeping the tool serviceable over several maintenance cycles. The bright finished surface aids chip flow and inspection, helping operators spot wear earlier and maintain process stability. These features together deliver consistent results when mounted in stationary or portable drilling equipment. Optimised Dimensions and Compliance for Industrial Use With a drill Diameter of 8 mm, Spiral Length 75 mm and Overall Length 117 mm, the tool follows the short drill conventions described in DIN 338, giving compatibility with standard tool holders and replacement policies. The combination of short spiral length and robust construction suits applications on both bench and machine tools where precise, repeatable holes in metal are required. For production planners this means easier tool inventory management and predictable cycle times. Who Benefits from This Short HSS Twist Drill Workshops, toolrooms and industrial maintenance teams benefit most from a short, stable drill that performs reliably in steels, cast materials and non-ferrous metals. Because the short twist drill design reduces vibration and improves hole accuracy, it is particularly advantageous for setups with limited clearance or when working on jigged and clamped assemblies. The tool is well suited to both experienced machinists seeking predictable performance and procurement managers who prioritise conformity to standards like DIN 338. Strong recommendation: choose the MetavCUT short HSS-G Twist Drill for precise metal drilling and consult METAV Werkzeuge for tailored technical advice — Email info@metav-werkzeuge.com · Tel +49 2822 7131930 · WhatsApp +49 170 2837271 Designation: Twist Drill (Short Spiralbohrer) Brand: MetavCUT SKU: 48080-FDA Diameter: 8 mm Point Angle: 135° Type: Type N Material: HSS-G Execution: Short Spiral Length: 75 mm Overall Length: 117 mm Shank Finish: Fully ground Surface Finish: Bright finished For Use With: Drilling Machine (Handbohrmaschine) Standard: DIN 338 Applications: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What makes a short twist drill different from a standard one? A short twist drill such as the MetavCUT Short Type N offers a reduced overhang and therefore higher rigidity compared with standard-length drills. This increases stability and improves hole accuracy in metalworking applications while reducing the risk of drill bending and chatter. Can the MetavCUT Twist Drill be used in a hand drilling machine? The MetavCUT Twist Drill is intended primarily for machine use, but it can be operated in heavy-duty handheld Drilling Machines when the setup is rigid and appropriate coolant is applied. For manual drilling in delicate tasks a dedicated hand-oriented bit may provide easier control. For what is a Twist Drill used? A Twist Drill is mainly used for machining high-strength materials and larger hole diameters. This form is easy to regrind and withstands considerable loads while delivering clean, precise holes suitable for subsequent tapping or finishing. Which three drill types are there? The three main drill types are metal drills, wood drills and stone/concrete drills. Each group is optimised for its material class and differs in point geometry, flute design and substrate material.
9.1mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Kurze, präzise Leistung: Die Kombination aus kurzer Ausführung und HSS‑G liefert hohe Stabilität und schnellere Schnittgeschwindigkeit bei Stahlbohrungen. Nutzen Sie die robuste Profi Line‑Ausführung für präzise Metallbearbeitung oder fragen Sie unsere Beratung bei Bedarf an, um die Einsatzbedingungen abzuklären und die passende Aufnahme zu wählen. Spiralbohrer – kurzer HSS‑G Metallbohrer (Profi Line) Spiralbohrer für präzise Bohrungen in Stahl, Guss und Nichteisenmetallen; ausgelegt für den Einsatz mit Handbohrmaschine und stationären Maschinen Kurze Ausführung für maximale Stabilität Geschliffen: hohe Rundlaufgenauigkeit Spitzenwinkel 135° für harte Werkstoffe HSS‑G: schnelleres Bohren bei geringerer Anpresskraft Geeignet für Handbohrmaschine und Werkstattbetrieb Mehr Stabilität durch geringe Auskraglänge Die kurze Ausführung reduziert die Auskraglänge und minimiert Vibrationen sowie das Risiko von Verbiegen. Das Ergebnis sind gleichmäßige Bohrlöcher und verbesserte Rundlaufgenauigkeit, besonders bei mittleren Durchmessern wie 9,1 mm. Anwender profitieren von höherer Prozesssicherheit bei gängigen Werkstücken aus Stahl, Guss oder Temperguss, weil der Bohrer weniger seitlich ausweicht und die Maschine entlastet wird. Effizienteres Bohren dank HSS‑G und 135° Spitzenwinkel Der geschliffene HSS‑G‑Werkstoff ermöglicht eine schärfere Geometrie und bis zu 40 % schnellere Zerspanung bei gleichzeitig etwa 50 % geringerer Anpresskraft im Vergleich zu herkömmlichen HSS‑Ausführungen. Der 135° Spitzenwinkel ist speziell für härtere Werkstoffe optimiert und erleichtert das Anbohren in legierten Stählen und Edelstahl. Für saubere Spanabfuhr empfiehlt sich die Nutzung von Kühlschmierstoff bei stationärer Bearbeitung. Für wen sich diese Ausführung besonders eignet Konzipiert wurde der Bohrer für Werkstätten, Instandhaltung und Montage, die häufig mittlere Bohrdurchmesser in Metall bearbeiten. Die Kombination aus geschliffener Schaftausführung und der Normkonformität nach DIN 338 macht den Bohrer zur passenden Wahl für Anwender, die Wert auf Präzision und Wiederholgenauigkeit legen. Bei Handgeführter Anwendung sorgt der Zylinderschaft für sichere Spannaufnahme in handelsüblichen Bohrfuttern. Praxistipp für besten Einsatz Vorbohren nach Bedarf, kontrollierte Vorschubgeschwindigkeiten und passende Kühlschmierstoffe verlängern die Standzeit und verbessern die Bohrbildqualität. Bei tiefen Bohrungen oder gehärteten Materialien empfiehlt sich schrittweises Aufbohren, um die Querschneide zu entlasten und Spanbildung zu vermeiden. Empfehlen die MetavCUT Profi Line Kurzbohrung für anspruchsvolle Metallarbeiten; bei Fragen zur Anwendung oder zur passenden Aufnahme steht die Metav Beratung per eMail info@metav-werkzeuge.com und Telefon +49 2822 7131930 zur Verfügung Produktmerkmale Artikelnummer: 48091-FDA Bezeichnung: Spiralbohrer Marke: MetavCUT Serie: Profi Line Typ: Typ N Fakten Durchmesser: 9,1 mm Gesamtlänge: 125 mm Spirallänge: 81 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Schaftausführung: geschliffen (vollständig geschliffener Zylinderschaft) Norm: DIN 338 (Norm für kurze Spiralbohrer mit Zylinderschaft) Ausführung: kurz Farbe: blank (bright finished) Für Bohrmaschine: Handbohrmaschine FAQ Für welche Werkstoffe eignet sich der Bohrer am besten? Der MetavCUT Spiralbohrer aus der Profi Line ist besonders geeignet für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss sowie Nichteisenmetalle und harte Kunststoffe; die Kombination aus HSS‑G Material und 135° Spitzenwinkel verbessert die Leistung bei harten Werkstoffen. Ist der Bohrer für Handgeführte Arbeiten geeignet? Ja, der Zylinderschaft und die kurze Ausführung machen den Bohrer für Handbohrmaschine und Werkstattgebrauch geeignet; bei hochpräzisen oder sehr tiefen Bohrungen sollte stationäre Aufnahme bevorzugt werden. Wie wirkt sich die geschliffene Ausführung auf die Bohrqualität aus? Geschliffene Geometrie sorgt für scharfe Schneiden und hohe Rundlaufgenauigkeit, was zu saubereren Bohrlöchern führt; das Material HSS‑G ist jedoch etwas spröder, daher sind stationäre Maschinen mit Kühlung vorteilhaft. Welche Norm gilt für diesen Bohrer und was bedeutet sie? Die Einhaltung von DIN 338 kennzeichnet kurze Spiralbohrer mit Zylinderschaft; das garantiert definierte Längen, Schaftformen und Fertigungsstandards für den zuverlässigen Einsatz in der Werkstatt. Welche Vorteile bietet der Spitzenwinkel 135°? Der 135° Spitzenwinkel reduziert das Anlaufen auf harten Werkstoffen und ermöglicht kraftsparenderes Eindringen, was besonders bei Edelstahl und gehärteten Stählen vorteilhaft ist. Welche Kennzeichnung hat dieses Produkt konkret? Der Artikel ist unter der Artikelnummer bzw. SKU 48091-FDA geführt und gehört zur MetavCUT Profi Line.
9.2mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Der kurze Spiralbohrer von MetavCUT vereint hohe Stabilität durch reduzierte Auskraglänge und eine HSS‑G‑Spitzengeometrie für schnelle, präzise Metallbohrungen; ideal für stationäre und handgeführte Anwendungen. Profitieren Sie von schnellerem Vorschub, geringerem Kraftaufwand und der DIN‑338‑Konformität – erhältlich über Metav mit kompetenter Beratung. Spiralbohrer kurz HSS‑G von MetavCUT, Profi Line Der Spiralbohrer in kurzer Ausführung für präzise Metallbohrungen an Handbohrmaschine und stationären Maschinen Spiralbohrer »48092‑FDA« von MetavCUT Kurze Ausführung für erhöhte Stabilität HSS‑G geschliffen für präzise Metallbohrungen Spitzenwinkel 135° für harte Werkstoffe Gesamtlänge 125 mm, Spirallänge 81 mm Höhere Präzision durch kurze Ausführung und geschliffene Geometrie Die kurze Ausführung reduziert die herausragende Schaftlänge und minimiert so Vibrationen und Verbiegen, was zu deutlich verbesserter Rundlaufgenauigkeit führt. In Kombination mit der geschliffenen HSS‑G‑Geometrie entstehen scharfe Schneiden und saubere Bohrlöcher, wodurch sich die Nachbearbeitung reduziert und die Prozesssicherheit steigt. Effizientes Bohren in harten Materialien mit reduziertem Kraftaufwand Der Spiralbohrer mit 135° Spitzenwinkel dringt besonders gut in legierte und unlegierte Stähle ein und senkt die Anpresskraft. Anwender profitieren von bis zu 40 % schnellerem Bohren und etwa 50 % weniger Kraftaufwand gegenüber herkömmlichen HSS‑Bohrern, was den Bedienkomfort an Handbohrmaschine und stationären Bohrern erhöht. Geeignetes Einsatzfeld und Zielgruppe Dieser Bohrer ist für Werkstätten, Montagebetriebe und anspruchsvolle Heimwerker konzipiert, die Metall, Guss und Hartkunststoff bearbeiten. Die Kombination aus kurzer Bauart und robuster Profi Line‑Ausführung macht ihn besonders geeignet für präzise Instandsetzungsarbeiten und Serien mit moderatem Stückvolumen. Handhabung, Sicherheit und Lebensdauer Die geschliffene Schaftausführung verlangt sorgsame Handhabung: Randbereiche vor Kantenkontakt schützen und bei stationären Einsätzen Kühlung verwenden. Regelmäßiges Nachschleifen und kontrolliertes Vorschubverhalten verlängern die Standzeit und erhalten die Präzision über viele Bohrzyklen. Aus Überzeugung empfehlen wir den MetavCUT Profi Line Spiralbohrer 48092‑FDA für präzise Metallbohrungen; bei Fragen steht das Team in Emmerich per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 zur Verfügung. Leistungsmerkmale Bezeichnung: Spiralbohrer Hersteller: MetavCUT Serie: Profi Line SKU: 48092‑FDA Fakten Durchmesser: 9,2 mm Gesamtlänge: 125 mm Spirallänge: 81 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS‑G (geschliffen für hohe Schnittschärfe) Norm: DIN 338 Schaftausführung: geschliffen Ausführung: kurz Typ: Typ N (Normalspirale für Metall) Für: Handbohrmaschine Farbe: blank FAQ Für welche Werkstoffe eignet sich der Spiralbohrer am besten? Der Spiralbohrer von MetavCUT Profi Line eignet sich besonders für legierten und unlegierten Stahl, Gussstahl, Gusseisen sowie Nichteisenmetalle und Hartkunststoffe; die Kombination aus HSS‑G und 135° Spitzenwinkel sorgt für gute Anbohrbarkeit gerade bei härteren Werkstoffen. Ist der Spiralbohrer 48092‑FDA für Handbohrmaschinen sicher verwendbar? Ja, die kurze Ausführung reduziert die Auskraglänge und erhöht dadurch die Stabilität, sodass der Spiralbohrer 48092‑FDA auch sicher an Handbohrmaschine eingesetzt werden kann, solange auf korrekte Aufnahme und kontrollierten Vorschub geachtet wird. Wie unterscheidet sich ein geschliffener HSS‑G Bohrer von einem gewalzten Bohrer? Ein geschliffener HSS‑G Bohrer wie der von MetavCUT bietet schärfere Schneiden, bessere Rundlaufgenauigkeit und sauberere Bohrbilder; dafür ist er tendenziell spröder und profitiert von stationärer Nutzung und Kühlung. Braucht der Bohrer spezielle Kühlschmierstoffe? Für langanhaltende Standzeiten und saubere Späne empfiehlt sich die Nutzung geeigneter Kühlschmierstoffe bei Bohrungen in gehärteten Werkstoffen; der MetavCUT Profi Line Spiralbohrer zeigt so seine optimale Leistung. Sind Vorbohrungen notwendig bei größeren Durchmessern? Für den angegebenen Durchmesser von 9,2 mm ist in den meisten Fällen direktes Bohren möglich; bei sehr harten oder dicken Materialien kann Anpunkten mit einem Zentrierbohrer die Genauigkeit weiter verbessern.
9.3mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Der kurze Spiralbohrer von MetavCUT verbindet hohe Stabilität durch reduzierte Auskraglänge mit effizienter Schneidleistung; die HSS-G-Ausführung sorgt für scharfe Schnittkanten und präzise Bohrlöcher, während die Geometrie ein bis zu 40 % schnelleres Bohren bei 50 % geringerer Anpresskraft ermöglicht. Bei Fragen berät Metav gern persönlich. Spiralbohrer (kurze Ausführung) von MetavCUT Der Spiralbohrer ist ein kurzer, geschliffener HSS-G-Bohrer für präzise Metallbohrungen an Hand- und stationären Maschinen. Kurze Ausführung für höhere Stabilität HSS-G geschliffen: scharfe Kontur und hohe Rundlaufqualität 135° Spitzenwinkel für harte Werkstoffe Geeignet für Handbohrmaschine und stationären Einsatz Bis zu 40 % schnellerer Schnitt bei 50 % weniger Anpresskraft Mehr Stabilität bei Metallbohrungen für präzise Ergebnisse Die kurze Ausführung reduziert die Auskraglänge und minimiert so Verbiegen und Schwingungen. Dadurch entstehen sauberere Bohrlöcher und ein konstanter Rundlauf, was gerade bei Metallbearbeitung die Nacharbeit reduziert. Die Kombination aus HSS-G-Werkstoff und geschliffener Schaftgeometrie sorgt für scharfe Schneiden und hohe Maßhaltigkeit, was die Wiederholgenauigkeit in Serien- und Einzelteilen verbessert. Schnelleres Arbeiten mit geringerer Anpresskraft für weniger Ermüdung Dank der optimierten Geometrie ist ein bis zu 40 % schnellerer Vorschub möglich, begleitet von etwa 50 % geringerer Anpresskraft gegenüber herkömmlichen HSS-Bohrern. Das verkürzt Durchlaufzeiten und reduziert Ermüdung beim Bediener. Für sehr harte Werkstoffe empfiehlt sich der 135°-Spitzenwinkel, und bei anspruchsvollen Materialien erhöht eine adäquate Kühlschmierung die Standzeit deutlich. Einsatzbereiche, Zielgruppe und praktische Hinweise Mit einem Durchmesser von 9,3 mm gehört dieser Bohrer in den Standard-Bereich und ist bestens geeignet für Werkstatt, Montage und allgemeine Metallbearbeitung. Er passt zu Handbohrmaschinen sowie zu stationären Säulenbohrmaschinen und bearbeitet legierte und unlegierte Stähle, Guss sowie Nichteisenmetalle zuverlässig. Bei hoher Präzision empfiehlt sich vorheriges Anpünken oder Zentrieren, um Wandern auf der Oberfläche zu vermeiden. Norm, Verarbeitung und Gebrauchsempfehlungen für langlebigen Einsatz Die Fertigung nach DIN 338 kennzeichnet die kurze Spiralform mit Zylinderschaft; die geschliffene Ausführung (HSS-G) steht für sehr gute Schneidschärfe und Rundlaufgenauigkeit. Als Typ N (Normalspirale) bietet der Bohrer eine ausgewogene Spanabfuhr für Metall. Wegen der möglichen Sprödigkeit geschliffener Bohrer sind kontrollierte Schnittbedingungen und Kühlung empfehlenswert, um Bruchrisiken zu minimieren. Für präzise Metallbohrungen empfehlen wir den MetavCUT Spiralbohrer in kurzer Ausführung — bestellen Sie oder holen Sie sich fachliche Beratung direkt bei Metav: info@metav-werkzeuge.com | Tel. +49 2822 7131930 | WhatsApp +49 170 2837271. Produktmerkmale Artikelnummer: 48093-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Profi Line Norm: DIN 338 Zahlen Durchmesser: 9,3 mm Gesamtlänge: 125 mm Spirallänge: 81 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Schaftausführung: geschliffen (CNC-Schliff) Typ: Typ N (Normalspirale) Farbe: blank (bright finished) Für Bohrmaschine: Handbohrmaschine Ausführung: kurz Hersteller: MetavCUT Normhinweis: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) FAQ Ist der Bohrer für Edelstahl geeignet? Der MetavCUT Spiralbohrer in HSS-G-Ausführung mit 135°-Spitzenwinkel eignet sich gut für harte Werkstoffe wie Edelstahl, sofern Kühlung und angepasste Schnittparameter verwendet werden. Kann der Bohrer in einer Handbohrmaschine eingesetzt werden? Ja, der Spiralbohrer ist für den Einsatz an einer Handbohrmaschine freigegeben und bietet durch die kurze Ausführung erhöhte Stabilität bei handgeführten Anwendungen. Welche Vorteile bietet die geschliffene Ausführung gegenüber walzgewalzten Bohrern? Geschliffene HSS-G-Bohrer liefern schärfere Kanten und bessere Rundlaufgenauigkeit, was präzisere Bohrungen in Metall ermöglicht; dafür ist vorsichtiger Umgang und Kühlung ratsam. Passt der Bohrer zu meiner Profi Line Ausstattung? Der MetavCUT Spiralbohrer aus der Profi Line ist kompatibel mit gängigen Zylinderschaft-Aufnahmen und ergänzt Werkzeugsätze für präzise Metallbearbeitung zuverlässig. Welche Maßnahmen verlängern die Standzeit des Bohrers? Moderate Schnittgeschwindigkeit, konstante Kühlschmierung und das Vermeiden übermäßiger Vorschubkraft erhöhen die Standzeit des geschliffenen HSS-G-Bohrers deutlich.
9.4mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Profi Line 9.4 mm (Type N) – HSS-G, 135°, Bright Finished, Fully Ground, Short A short Twist Drill engineered for precise metalworking, combining a 135° tip and HSS‑G ground geometry for stable, clean holes in hard materials. Short design for increased stability and precision 135° tip angle for easier penetration in hard materials HSS‑G ground for sharp edges and high runout accuracy Type N spiral optimized for metal drilling Conforms to DIN 338 for short twist drills Higher Throughput and Lower Effort through Ground HSS Design Dank der HSS‑G Ausführung produziert dieser kurze Bohrer besonders scharfe Schneiden und eine hohe Rundlaufgenauigkeit, was zu saubereren Bohrlöchern führt. Die geschliffene Geometrie ermöglicht ein bis zu 40% schnelleres Bohren bei gleichzeitig 50% geringerem Anpressdruck gegenüber herkömmlichen HSS‑Bohrern. Das Resultat ist eine spürbare Zeitersparnis bei Serien- und Präzisionsarbeiten sowie reduzierte Ermüdung des Bedieners und der Maschine. Robustes Design für anspruchsvolle Metallbearbeitung Diese Ausführung mit Type N Normalspirale wurde gezielt für die Bearbeitung von Stahl und Eisen entwickelt und eignet sich für legierte sowie unlegierte Stähle, Gusswerkstoffe, Sintereisen, Nichteisenmetalle und Hartkunststoffe. Die kurze Spiral‑Länge erhöht die Stabilität und vermindert das Abknicken, sodass das Werkzeug auch bei anspruchsvollen Drilling Machine‑Anwendungen präzise arbeitet. Dadurch entsteht ein klarer Vorteil bei harten Werkstoffen und engen Toleranzen. Präzise Anbohrung dank 135° Spitzenwinkel Der 135° Spitzenwinkel reduziert die Anbohrzeit in harten Materialien und verringert die Tendenz zum „Wandern“ der Spitze beim Ansetzen. Das Ergebnis sind besser zentrierte, maßhaltige Bohrungen mit geringerem Gratbild. Für Anwender bedeutet das weniger Nacharbeit, höhere Teilequalität und verlässlichere Ergebnisse bei tiefen oder schwierigen Bohrungen. Normkonformität und Einsatzgebiet für Profis Gefertigt nach DIN 338 als kurzer Spiralbohrer mit Zylinderschaft bietet die Profi Line reproduzierbare Qualität und Kompatibilität mit gängigen Spannfuttern. Die Kombination aus Bright Finished Oberfläche und fully ground Schaft sorgt für sichere Aufnahme und einfache Nachbearbeitung. Diese Bauform richtet sich an Werkstätten, industrielle Fertigung und Anwender, die wiederholt präzise Metallbohrungen benötigen. I recommend the MetavCUT Profi Line Twist Drill for demanding metalworking applications — for expert advice or to check whether this drill meets your technical requirements contact METAV Werkzeuge: info@metav-werkzeuge.com, Tel +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48094-FDA Diameter: 9.4 mm Spiral Length (Flute): 81 mm Overall Length: 125 mm Tip Angle: 135° Type: Type N Execution: Short Material: HSS-G Shaft Finish: Fully ground Colour / Surface: Bright Finished For Drill Machine: Drilling Machine Application: Drills for metal Model Series: Profi Line Standard: DIN 338 Packaging Unit: 5 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for and which materials suit them best? The MetavCUT Twist Drill (Type N) is primarily used for machining high‑strength materials and larger bore diameters. Its short, ground form is easy to resharpen and withstands greater loads, making it suitable for metalwork including alloyed and unalloyed steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. Which three drill types exist? Commonly distinguished drill types are Metal Drill, Wood Drill and Masonry/Concrete Drill; the MetavCUT Twist Drill belongs to the Metal Drill category and is optimized for those applications.
9.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Type N) – Short HSS‑G, 9.5 mm, 135°, Profi Line, Bright Finished, Fully Ground Shank, DIN 338 The Twist Drill Type N short HSS‑G is a precision metalworking drill for drilling machines, engineered for stable, fast and accurate holes in hard materials. Short HSS‑G design for increased stability 9.5 mm diameter for precise metal holes 135° point angle for hard materials Fully ground shank for low runout Complies with DIN 338; Profi Line by MetavCUT Faster, more stable drilling in metalwork The Twist Drill from the MetavCUT Profi Line uses HSS‑G material and a short design to reduce overhang and vibration, delivering higher stability than standard drills. This construction enables up to 40% faster penetration and requires around 50% less feed force compared with conventional HSS tools, so holes in alloyed or unalloyed Steel and Cast materials are produced more efficiently. The direct result is shorter cycle times in workshop or production environments without sacrificing accuracy. Designed for hard materials and clean hole entry A 135° point angle and the Type N normal spiral geometry provide optimal entry behaviour in tougher materials such as Stainless Steel and Tempered Castings. The larger point angle shortens initial bite and reduces the tendency to skate on the surface, which improves centring and reduces chatter when starting a hole. For users unfamiliar with drill geometry: a greater point angle gives a flatter tip that spreads cutting forces and is better suited to high‑strength metals. Ideal users and typical applications Professional workshops and precision metalworkers benefit most from this short twist drill, especially when using a drilling machine or hand drill set up for metal. Typical applications include drilling in Alloyed Steel, Cast Iron, Sintered Metals, Non‑Ferrous Metals and hard Plastics. The robust design is targeted at machinists who prioritise repeatable accuracy and minimal tool deflection during medium‑depth drilling operations. Handling, care and drilling recommendations Because the flute geometry is fully ground, the tool offers excellent cutting edges and precise runout but can be more brittle than rolled variants; coolant and correct feed rates are therefore recommended for extended tool life. For drilling tasks up to standard depths, this type of short twist drill is commonly used for diameters up to 20 mm and depths up to 100 mm. Use moderate speeds and steady feeds, ensure secure clamping, and apply cutting fluid for hard or heat‑sensitive alloys to maintain edge life and hole quality. Strong recommendation: For demanding metal drilling choose the MetavCUT Profi Line short Twist Drill — METAV Werkzeuge provides expert technical advice and support to ensure the tool meets your application needs. Contact METAV Werkzeuge by eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48095-FDA Model Series: Profi Line Execution: short Material: HSS-G Diameter: 9.5 mm Overall Length: 125 mm Spiral Length: 81 mm Point Angle: 135° Type: Type N Shank Execution: fully ground Colour: bright finished Application: Drills for metal Standard: DIN 338 For Drilling Machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill Type N is primarily designed for metalworking and is applied to drilling high‑strength and hard materials; it performs particularly well in alloyed and unalloyed Steel, Cast Iron, Sintered Iron, Tempered Castings and hard Plastics thanks to its HSS‑G construction and short geometry. Which three drill types are commonly distinguished? In tool selection the three main categories are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill belongs to the Metal drills group and is optimised for those metallic materials. For what is a Twist Drill mainly used? A Twist Drill such as the MetavCUT Profi Line is mainly applied to machining high‑strength materials and larger drill diameters; its ground geometry is relatively easy to resharpen and stands up to heavier loads in demanding metalworking tasks. Why are Twist Drills pointed and what is the benefit of a 135° point? The point reduces the cross‑cut at the tip so cutting forces and friction fall, allowing lower feed forces and better centring; a 135° tip in particular shortens the initial entry time and suits harder materials by distributing cutting loads more favourably.
9.6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Der kurze Spiralbohrer 9,6 mm von MetavCUT kombiniert hohe Stabilität durch verkürzte Auskraglänge mit schnellerer Schnittleistung dank HSS‑G und geschliffener Geometrie; das Ergebnis sind präzise Bohrungen in gehärteten Werkstoffen bei reduziertem Anpressdruck. Nutzen Sie die Kombination aus Effizienz, Präzision und Normkonformität für Ihre Werkstattarbeit und bestellen Sie direkt über Metav oder lassen Sie sich von unserer Beratung technisch unterstützen. Spiralbohrer 9,6 mm von MetavCUT Profi Line Der Spiralbohrer 9,6 mm in kurzer Ausführung ist für präzise Metallbohrungen an stationären und handgeführten Maschinen konzipiert und eignet sich besonders für legierte und unlegierte Stähle. Kurze Ausführung für höhere Stabilität HSS‑G geschliffen für präzise Schnittkante Spitzenwinkel 135° für harte Werkstoffe DIN 338 Normgerecht für Zylinderschaftbohrer Geeignet für Handbohrmaschine und stationäre Maschinen Hohe Stabilität und schnellere Bohrleistung durch kurze Bauform Die kurze Ausführung reduziert die Auskraglänge und erhöht damit die Stabilität während des Bohrens, wodurch Verbiegen und Abweichen minimiert werden. In Kombination mit dem geschliffenen HSS‑Material lässt sich laut Herstellerangaben die Bohrgeschwindigkeit um bis zu 40 % steigern, bei gleichzeitig um 50 % reduzierter Anpresskraft. Der direkte Nutzen für die Werkstatt liegt in schnellerem Durchsatz bei gleichbleibender Bohrungsqualität und geringerer Belastung von Maschine und Bediener. Präzision bei harten Werkstoffen dank geschliffener Geometrie und 135° Spitze Der geschliffene Schneidkörper (HSS‑G) bietet scharfe Kanten und hohe Rundlaufgenauigkeit, was saubere Bohrlöcher in Stahl, Gusseisen und anderen harten Materialien ermöglicht. Der Spitzenwinkel 135° verringert das Ausreißen beim Anbohren und eignet sich daher besonders für Edelstahl und gehärtete Werkstoffe. Die Einhaltung der DIN 338 gewährleistet eine zuverlässige Einordnung in bestehende Fertigungsprozesse und erleichtert die Auswahl passender Bohrerkollektionen. Praktische Anwendungsempfehlungen für Werkstatt und Fertigung Für den Einsatz empfiehlt sich das Anpunkten mit einem Zentrierbohrer bei hoher Präzision, insbesondere bei freihändig geführten Bohrungen. In der Cluster‑Einordnung gehört ein Durchmesser von 9,6 mm zum Standard‑Bereich, somit ist Direktbohren möglich; bei besonders exakter Toleranz ist ein stationärer Einspanngang von Vorteil. Die kombinierte Eignung für legierte Stähle, Gusswerkstoffe und Nichteisenmetalle macht den Bohrer vielseitig einsetzbar in Montage, Reparatur und Maschinenbau. Pflege, Kühlung und Sicherheit für langlebige Ergebnisse Bei anspruchsvollen Materialien sorgt regelmäßige Kühlung für bessere Spanabfuhr und reduziert thermische Belastung des HSS‑G. Die Nutzung in stationären Maschinen mit ausreichender Kühlmitteleinbindung erhöht die Lebensdauer und verhindert Überhitzung. Für handgeführte Anwendungen empfiehlt sich kontrollierter Vorschub und stabile Führungsbedingungen, um Bruchrisiken zu minimieren und die präzise Bohrungsqualität zu erhalten. Empfehlung: Für langlebige Präzision den MetavCUT Spiralbohrer mit geschliffener HSS‑Geometrie wählen — technische Beratung und Bestellung über Metav: info@metav-werkzeuge.com, Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 48096-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Profi Line Norm: DIN 338 Material: HSS-G Ausführung: kurz Schaftausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine Typ: Typ N Daten Durchmesser: 9,6 mm Gesamtlänge: 133 mm Spirallänge: 87 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten HSS-G: Schnellarbeitsstahl geschliffen: CNC‑Schliff für scharfe Kanten DIN 338: kurze Spiralbohrer mit Zylinderschaft Einsatzgebiet: Metallbearbeitung Typ N: Normalspirale für Metall FAQ Wie unterscheidet sich der MetavCUT Spiralbohrer 9,6 mm von Rollgewalzten Bohrern? Der MetavCUT Spiralbohrer 9,6 mm ist geschliffen (HSS‑G) und bietet dadurch schärfere Kanten und höhere Rundlaufgenauigkeit im Vergleich zu rollgewalzten Ausführungen; das führt zu saubereren Bohrlöchern in Metall bei höherer Präzision. Ist der Spiralbohrer 9,6 mm für Edelstahl geeignet? Ja, der Spiralbohrer 9,6 mm von MetavCUT mit 135° Spitzenwinkel ist speziell für härtere Werkstoffe wie Edelstahl geeignet, da der größere Spitzenwinkel das Anbohren erleichtert und Ausrisse reduziert. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Der Bohrer ist für die Nutzung an einer Handbohrmaschine vorgesehen, empfiehlt sich aber besonders bei stationärer Verwendung, um die Vorteile der kurzen Ausführung und des geschliffenen Schaftes vollständig auszuschöpfen. Welche Vorteile bietet die kurze Ausführung im Alltag? Die kurze Ausführung reduziert die Auskraglänge, erhöht die Stabilität und minimiert das Wandern des Bohrers, was zu präziseren Ergebnissen und geringerem Werkzeugverschleiß in der Fertigung führt. Welche Materialien lassen sich mit dem Typ N Spiralbohrer bearbeiten? Der Typ N Normalspirale des MetavCUT Spiralbohrers eignet sich für unlegierte und legierte Stähle, Gussstahl, Gusseisen, Sintereisen sowie Nichteisenmetalle und Hartkunststoffe. Welche Kennnummer hat der Bohrer für die Nachbestellung? Für Nachbestellungen oder Rückfragen nutzen Sie bitte die Artikelnummer 48096-FDA bzw. die Angabe Spiralbohrer 9,6 mm MetavCUT Profi Line und kontaktieren Sie Metav per E‑Mail oder Telefon.
Precision centring for clean, repeatable holes
The HSS‑G twist drill DIN 338 type N, short, ground, uncoated, 135° split point is a universal production drill engineered for demanding workshop and industrial tasks. Also described as a high-speed steel twist drill or ground twist drill, it combines accurate centring with excellent chip evacuation for process-secure drilling.
Where this drill makes a measurable difference
Designed to be used directly in production settings, the drill’s ground profile is machined from solid HSS, not roll-formed, which delivers superior concentricity and razor-sharp cutting edges. The flat 135° split point with cross grind centres the drill on contact, so the usual pre‑punching step can be omitted. That reduces set-up time, lowers drilling force and prevents walking on smooth surfaces, making it ideal for series work and delicate fixturing.
Concrete benefits for daily use
- Faster set-up and higher first-pass accuracy thanks to the 135° split point.
- Improved hole quality and dimensional consistency from the ground HSS profile.
- Reduced chip adhesion and smoother flute flow with the uncoated (blank) surface, especially on aluminium and plastics.
- Lower drilling force and less tool deflection for thin sheets and non-ferrous materials.
- Versatile application across common workshop materials while maintaining process reliability.
Metav as a practical precision partner
Metav combines decades of application expertise with a focused European supply chain from Emmerich. With more than 48,000 customers and a broad range of workshop and metrology supplies, Metav offers this HSS‑G twist drill as part of a pragmatic range that balances reliability and accessibility. The combination of product knowledge and dependable logistics supports uninterrupted production and sensible purchasing decisions.
Technical data
- Standard: DIN 338
- Type: type N (short)
- Material: ground from solid high-speed steel (HSS)
- Coating/surface: uncoated (blank)
- Point geometry: 135° split point with cross grind
- Profile: ground flutes, razor-sharp cutting edges, high concentricity
- Typical applications: steel; iron; sheet metal; non-ferrous metals; aluminium; various plastics
- Operational advantages: self-centring; reduced need for centre‑punching; improved chip evacuation; lower drilling force
FAQ
Is the HSS‑G twist drill suitable for aluminium and plastics?
The HSS‑G twist drill is well suited to aluminium and many plastics. Its uncoated, blank surface reduces friction and helps chips evacuate cleanly so material build-up on the cutting edge is minimised.
Can I omit centre‑punching with this drill?
Yes. The 135° split point with cross grind self‑centres on contact, which typically removes the need for separate centre‑punching and reduces the risk of the drill walking.
How does a ground twist drill differ from roll‑formed drills?
A ground twist drill is machined from solid HSS, providing better concentricity, sharper cutting edges and smoother flutes compared with roll‑formed alternatives, resulting in higher hole quality and longer reliable performance.
What does type N mean in DIN 338?
Type N indicates the short series as defined in DIN 338, making this configuration compact for stable, controlled drilling in workshop and industrial applications.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com