CNMG 120408 Indexable Insert - MetavCUT

Comprehensive Technical Specifications: Order Number: P354TM Item: Boring Bar usable with CNMG 1204 Indexable Inserts Brand: Teknik Makina ISO Code: S40T PCLNL 12 Numbers and Data: Diameter: 50mm Weight: 1.825kg Total length: 300mm Cutting Height: 55mm Additional Informattion Cutting Direction: links Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Technical Information: Order Number: P352TM Item: Boring Bar usable with CNMG 1204 Indexable Inserts Brand: Teknik Makina ISO Code: S32T PCLNL 12 Metric Information: Diameter: 40mm Weight: 1.815kg Total length: 300mm Cutting Height: 50mm Additional Informattion Cutting Direction: links Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Technical Data: Order Number: P350TM Item: Boring Bar usable with CNMG 1204 Indexable Inserts Brand: Teknik Makina ISO Code: S25S PCLNL 12 Quantitative Characteristics: Diameter: 32mm Weight: 0.978kg Total length: 250mm Cutting Height: 50mm Additional Informattion Cutting Direction: links Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Available Technical Details: Order Number: P342TM Item: Boring Bar usable with CNMG 1204 Indexable Inserts Brand: Teknik Makina ISO Code: S32T PCLNR 12 Structural Details: Diameter: 40mm Weight: 1.815kg Total length: 300mm Cutting Height: 50mm Additional Informattion Cutting Direction: rechts Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Product Technical Specifications: Order Number: P340TM Item: Boring Bar usable with CNMG 1204 Indexable Inserts Brand: Teknik Makina ISO Code: S25S PCLNR 12 Metric Information: Diameter: 32mm Weight: 0.978kg Total length: 250mm Cutting Height: 50mm Additional Informattion Cutting Direction: rechts Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Specifications: Order Number: P338TM Item: Boring Bar usable with CNMG 1204 Indexable Inserts Brand: Teknik Makina ISO Code: S20R PCLNR 12 Numerical Representations: Diameter: 24mm Weight: 0.54kg Total length: 200mm Cutting Height: 50mm Additional Informattion Cutting Direction: rechts Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Product Information: Order Number: AP354TM Item: Boring Bar usable with CNMG 1204 Indexable Inserts Brand: Teknik Makina ISO Code: A40T PCLNL 12 Quantitative Characteristics: Diameter: 50mm Weight: 1.82kg Total length: 300mm Cutting Height: 55mm Additional Informattion Cutting Direction: links Cooling Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Available Technical Details: Order Number: AP352TM Item: Boring Bar usable with CNMG 1204 Indexable Inserts Brand: Teknik Makina ISO Code: A32T PCLNL 12 Quantitative Specifications: Diameter: 40mm Weight: 1.809kg Total length: 300mm Cutting Height: 50mm Additional Informattion Cutting Direction: links Cooling Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Technical Specifications: Order Number: AP338TM Item: Boring Bar usable with CNMG 1204 Indexable Inserts Brand: Teknik Makina ISO Code: A20R PCLNR 12 Structural Details: Diameter: 24mm Weight: 0.52kg Total length: 200mm Cutting Height: 50mm Additional Informattion Cutting Direction: rechts Cooling Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Technical Information: Order Number: AP344TM Item: Boring Bar usable with CNMG 1204 Indexable Inserts Brand: Teknik Makina ISO Code: A40T PCLNR 12 Numerical Representations: Diameter: 50mm Weight: 1.82kg Total length: 300mm Cutting Height: 55mm Additional Informattion Cutting Direction: rechts Cooling Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Available Technical Details: Order Number: AP342TM Item: Boring Bar usable with CNMG 1204 Indexable Inserts Brand: Teknik Makina ISO Code: A32T PCLNR 12 Numbers and Data: Diameter: 40mm Weight: 1.809kg Total length: 300mm Cutting Height: 50mm Additional Informattion Cutting Direction: rechts Cooling Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Turning Holder (Klemmhalter) by Teknik Makina The Turning Holder (Klemmhalter) PCLN for CNMG indexable inserts is a right-hand clamping tool engineered for precise external turning on CNC lathes and conventional machines. PCLNR 2020 ISO toolholder Compatible with CNMG 1204 Inserts 125 mm Overall Length for versatile reach Internal Coolant for improved chip control 95° Cutting Angle for stable engagement Precision and Rigidity for Consistent Results The PCLNR 2020-style Turning Holder combines a rigid Geometry with a 95° Cutting Angle to ensure stable engagement of CNMG inserts and repeatable machining performance. Because the toolholder is designed for right-hand cutting and accepts CNMG 1204 indexable inserts, setup is straightforward and tool changes are fast. This direct compatibility reduces downtime and supports consistent surface finish in serial production and single-part jobs. Controlled Cooling to Extend Tool Life Equipped with Internal Coolant, the clamping holder channels fluid directly to the cutting zone, improving chip evacuation and heat management. Improved cooling reduces insert wear and helps maintain dimensional accuracy during longer cuts. For workshops aiming to maximise Insert Life and minimise rework, this feature delivers a measurable increase in process reliability without complex retrofits. Compact Dimensions for Flexible Machining With an overall length of 125 mm and a shank cross-section of 20 × 20 mm, the toolholder offers a compact footprint that suits tight setups while preserving leverage for effective turning. The Cutting Head Width of 25 mm and a Cutting Height of 28 mm ensure correct insert seating and stable clamping. Standard fastening components such as the TH821 clamping screw and TL4 lever simplify maintenance and spare-part logistics in busy shops. Built for Professional Workshops and Job Shops This Turning Holder is aimed at machinists, maintenance departments and job shops that require reliable, repeatable external turning with CNMG indexable inserts. By combining standard ISO designation PCLNR 2020 with common clamping parts and internal coolant, the holder reduces setup complexity and supports efficient machining cycles. METAV Werkzeuge provides technical advice for complex applications to help integrate the toolholder into existing processes. Strong recommendation: Select the Teknik Makina Turning Holder with Internal Coolant for improved turning accuracy and longer insert life — for personalised application support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Bezeichnung: Turning Holder (Klemmhalter) Marke: Teknik Makina SKU: AP130TM For Indexable Inserts: CNMG 1204 Compatible Inserts: CNMG 1204 Overall Length: 125 mm Weight: 0.428 kg Allen Key: 3 Allen Internal Coolant: Yes ISO Designation: PCLNR 2020 Alternative Designation: K12-IKG1/8 Width: 20 mm Height: 20 mm Cutting Head Width: 25 mm Clamping Screw: TH821 Lever: TL4 Pin: TS-4 Cutting Height: 28 mm Cutting Direction: Right Cutting Angle: 95° Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder (Klemmhalter) from Teknik Makina? The Turning Holder (Klemmhalter) by Teknik Makina is designed to accept CNMG 1204 indexable inserts, ensuring secure seating and compatibility with standard CNMG geometries. Does the Teknik Makina Turning Holder include internal coolant? Yes, the Teknik Makina Turning Holder (Klemmhalter) features Internal Coolant, which directs coolant to the cutting zone to assist chip evacuation and reduce insert wear. What are the main dimensions of the Turning Holder from Teknik Makina? The Turning Holder (Klemmhalter) from Teknik Makina has an overall length of 125 mm, a shank size of 20 × 20 mm and a cutting head width of 25 mm, offering a compact yet robust solution for various turning setups. Is the Teknik Makina Turning Holder suitable for right-hand turning only? The Turning Holder (Klemmhalter) by Teknik Makina is configured for right-hand cutting; for other orientations consult METAV Werkzeuge to verify suitability for your application. Who can provide technical support for the Teknik Makina Turning Holder? For application advice or further technical data on the Turning Holder (Klemmhalter) from Teknik Makina, METAV Werkzeuge offers competent support — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271. 125mm PCLN Turning Holder for CNMG 1204 Indexable Inserts, Internal Coolant, PCLNR 2020 - Teknik Makina

Clamping Holder — Turning Holder for CNMG 1204 by Teknik Makina The Clamping Holder (Turning Holder) secures CNMG 1204 indexable inserts for precise, right-hand turning operations on lathes and turning centers. Clamping Holder PCLNR 2020 for CNMG 1204 125 mm overall length for stable overhang 95° cutting angle for versatile turning 20 mm shank width and height for rigidity Right-hand orientation for conventional turning High rigidity and precise tool guidance for repeatable results The PCLNR-style toolholder is engineered to deliver stability and repeatability in turning applications. With an overall length of 125 mm and a shank cross-section of 20 x 20 mm, the design minimises deflection under cutting forces and supports consistent surface finish and dimensional accuracy. Using a correctly seated CNMG 1204 insert, operators benefit from reduced vibration and longer insert life, which translates into predictable cycle times and lower tooling costs. Geometry that supports chip control and versatile cutting The toolholder’s 95° cutting angle and a cutting head width of 25 mm support versatile approach angles and effective chip control during general turning. The right-hand orientation is intended for standard clockwise spindle rotation and conventional turning setups. For customers less familiar with indexable tooling: an indexable insert is a replaceable cutting tip that can be rotated or replaced when worn, enabling quick turnaround and consistent cutting geometry without regrinding. Designed for professional workshops and machine compatibility This holder is suitable for metalworking shops that require a robust, easy-to-service solution for external turning with CNMG 1204 inserts. Its ISO designation PCLNR 2020 ensures compatibility with toolposts and turrets engineered for standard PCLNR holders. The product is aimed at machine shops, maintenance departments and production lines where frequent insert changes and reliable repeatability are priorities. Practical installation and operational recommendations For reliable performance, ensure the insert seats flat against the pocket and that the clamp screw is tightened to the toolmaker’s recommended torque; this secures correct insert position and repeatability. Regularly inspect the clamping surfaces and replace damaged screws or wedges to maintain clamping force. If there is any uncertainty about machine fit, insert grade selection or mounting instructions, Teknik Makina products are supported by METAV Werkzeuge’s technical team for application-specific guidance. Choose Teknik Makina for dependable clamping and predictable turning performance — for tailored application advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp: +49 170 2837271) Technical Specifications Bezeichnung: Clamping Holder Marke: Teknik Makina SKU: P130TM Compatible Inserts: CNMG 1204 ISO designation: PCLNR 2020 Overall length: 125 mm Shank width: 20 mm Shank height: 20 mm Cutting head width: 25 mm Cutting angle: 95° Cutting direction: Right Weight: 0.421 kg GTIN: 4061905149825 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Which inserts fit the Clamping Holder from Teknik Makina? The Clamping Holder from Teknik Makina is designed for CNMG 1204 indexable inserts; the pocket and clamp geometry conform to that insert family to ensure secure seating and correct cutting geometry. Can this holder be used for left-hand turning applications? This Teknik Makina turning holder is specified for right-hand cutting direction; for left-hand operations, a holder designed for left-hand orientation should be selected to match the machine setup. What are the key dimensions I should check for machine compatibility? Verify the overall length of 125 mm and the shank cross-section 20 x 20 mm against your toolpost or turret envelope, and ensure the ISO designation PCLNR 2020 is supported by your clamping system. Who can help if I need application advice for this Turning Holder? If you are unsure whether this Teknik Makina Turning Holder fits your requirements or need additional technical data, METAV Werkzeuge provides competent consultation — contact info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp: +49 170 2837271). 95° PCLNR Turning Holder for CNMG 1204, 125mm Length, PCLNR 2020 - Teknik Makina

Clamping Holder PCLNL 1616 — Turning Holder for CNMG 1204 Indexable Inserts by Teknik Makina The Clamping Holder PCLNL 1616 is a Turning Holder engineered for secure mounting of CNMG 1204 indexable inserts, providing left-hand cutting and internal coolant for precise metalworking applications. Clamping Holder PCLNL 1616 for CNMG 1204 inserts Internal coolant for improved tool life 100 mm overall length for compact setups 95° Cutting Angle for reliable chip control Quick insert clamping with TH818 screw Engineered for secure insert clamping and stable cutting The Clamping Holder is built to hold CNMG 1204 inserts with consistent stability, reducing vibration during machining. The ISO designation PCLNL 1616 ensures standardised fitment and predictable performance across toolposts. With precise contact surfaces and a robust clamping geometry, the toolholder minimises insert movement, which directly improves surface finish and dimensional accuracy. This stability benefits operators seeking dependable, repeatable turning results in both finishing and light roughing operations. Coolant-through design enhances performance and insert life Equipped with internal coolant, the holder delivers cutting fluid directly to the cutting edge, supporting efficient cooling and chip flushing. This feature reduces thermal stress on the insert and workpiece, which can extend insert life and lower tooling costs. The holder’s 95° Cutting Angle is optimised for predictable chip flow and controlled cutting forces. For users less familiar with coolant-through tooling: internal coolant means the coolant is channelled inside the holder to emerge at the insert interface, improving cooling efficiency compared with external nozzles. Compact dimensions for versatile machine integration With an overall length of 100 mm and a body cross-section of 16 mm x 16 mm, this Turning Holder fits into confined tool arrangements and compact turrets. The 20 mm cutting-head width supports secure seating of the CNMG 1204 insert while allowing close proximity to adjacent tools. These compact dimensions make the holder suitable for medium-duty turning where space is limited or where multiple tools must be arranged tightly. The result is a flexible setup that preserves rigidity without compromising accessibility. Fast, reliable clamping and simple maintenance Maintenance and insert changes are straightforward thanks to the designated clamping hardware: the clamping screw TH818, the knee lever TL4, and the locating pin TS-4 work together to ensure repeatable positioning. A standard 3 Allen key is used for adjustments, keeping service fast and low on downtime. These design choices prioritise operational efficiency: quick insert replacement and secure fixation help shops maintain high uptime and consistent part quality. For precision left-hand turning, choose the Teknik Makina Clamping Holder PCLNL 1616 — METAV Werkzeuge provides expert consultation and support; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice. Technical Specifications Bezeichnung: Clamping Holder Brand: Teknik Makina SKU: AP139TM Secondary designation: PCLN for CNMG Indexable Inserts Compatible Inserts: CNMG 1204 ISO designation: PCLNL 1616 Overall length: 100 mm Width: 16 mm Height: 16 mm Cutting head width: 20 mm Cutting height: 28 mm Cutting direction: left Cutting angle: 95° Internal coolant: Yes Clamping screw: TH818 Knee lever: TL4 Locating pin: TS-4 Allen key: 3 Allen Weight: 0.236 kg GTIN: 4061905150302 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Is the Clamping Holder PCLNL 1616 compatible with CNMG 1204 inserts? Yes. The Teknik Makina Clamping Holder PCLNL 1616 is specifically designed for CNMG 1204 indexable inserts and provides the correct seating and clamping geometry for secure operation. Does the Turning Holder feature internal coolant? Yes. The Teknik Makina Turning Holder includes internal coolant to deliver fluid directly to the cutting edge, improving cooling, chip evacuation and insert life. What cutting direction does the Clamping Holder support? The Clamping Holder PCLNL 1616 is configured for left-hand cutting, making it suitable for operations that require left-hand tool orientation on the machine. How are inserts secured and changed on this holder? Inserts are secured using the TH818 clamping screw and can be adjusted with a standard 3 Allen key; the TL4 knee lever and TS-4 locating pin ensure repeatable positioning and fast insert changes. 95° PCLNL 1616 Turning Holder, 100mm, Internal Coolant, For CNMG 1204 - Teknik Makina

Clamp Holder — DCKNR for CNMG Indexable Inserts Clamp Holder — DCKNR for CNMG Indexable Inserts is a robust Turning Holder designed for CNMG 1204 and CNMG 1606 indexable inserts, engineered to deliver high precision and efficient tool changes in professional turning applications. Clamp Holder DCKNR 2525 for CNMG indexable inserts 75° Cutting Angle for precise surface finish Compatible with CNMG 1204 and CNMG 1606 inserts Robust 150 mm Overall Length for stable machining 25 mm Shank Width and 32 mm Cutting-Head Width Engineered for faster setup and consistent cycle times The DCKNR 2525 Clamp Holder reduces setup time by securing indexable inserts with a stable clamping mechanism that allows quick screwdriver access to the mounting screws. This results in faster tool changes and higher machine uptime, which supports measurable productivity gains in batch production. The combination of quick clamping and a proven geometry minimizes rework and contributes to predictable cycle times on CNC Lathes. Stability and surface quality through controlled cutting forces With a 75° cutting angle and a solid Cutting-Head, the holder provides enhanced rigidity that reduces vibration and improves Repeatability. As a consequence, Surface Finish is more consistent across serial parts and insert wear becomes more uniform. The mechanical design translates directly into longer insert life and fewer interruptions for quality checks or regrinding. Clear compatibility and what “indexable insert” means The Clamp Holder is specified for CNMG 1204 and CNMG 1606 indexable inserts and follows the ISO designation DCKNR 2525. An indexable insert is a replaceable cutting tip that mounts to a toolholder, allowing only the worn insert to be exchanged instead of the entire tool. This principle reduces Consumable Costs and makes inventory management easier, particularly in workshops that standardize on CNMG-style inserts. Design details that matter for heavy-duty applications Dimensions such as the 150 mm overall length, 25 mm Shank Width and 25 mm Shank Height provide structural support for demanding turning operations. The right-hand cut orientation supports conventional lathe setups and the 32 mm Cutting-Head Width helps distribute cutting forces. These attributes make the holder suitable for both roughing and finishing passes where process stability is critical. Ideal users and typical applications This Clamp Holder is targeted at professional workshops, job shops and industrial manufacturers who require reliable, repeatable Turning performance. It is especially effective in medium- to high-volume CNC turning where quick insert changes, consistent surface quality and reduced Total Cost of Ownership are priorities. The holder’s compatibility with widely used CNMG inserts ensures straightforward tool supply and replacement. Simple maintenance and expert support when needed Maintenance is limited to periodic inspection of the clamp screw and a quick replacement of worn inserts, keeping machine downtime to a minimum. For assistance choosing the right insert grade or verifying dimensional fit, METAV Werkzeuge provides competent technical advice and order support, helping to ensure the holder integrates seamlessly into existing tool systems. We recommend the Teknik Makina Clamp Holder DCKNR for reliable precision turning — for detailed technical guidance or application support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Details for Reliable Setup Bezeichnung: Clamp Holder Brand: Teknik Makina SKU: D116-1TM ISO Designation: DCKNR 2525 Compatible Indexable Inserts: CNMG 1204, CNMG 1606 Overall Length: 150 mm Shank Width: 25 mm Shank Height: 25 mm Cutting-Head Width: 32 mm Cutting Angle: 75° Cutting Direction: right Weight: 0.44 kg GTIN: 4061905151552 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Clamp Holder by Teknik Makina and what is the ISO designation? The Clamp Holder from Teknik Makina is compatible with CNMG 1204 and CNMG 1606 indexable inserts and uses the ISO designation DCKNR 2525, ensuring interchangeability with standard CNMG tooling systems. Can the Teknik Makina Clamp Holder DCKNR 2525 be used for both finishing and roughing? Yes, the Teknik Makina Clamp Holder DCKNR 2525 is designed with a 75° cutting angle and a sturdy 150 mm length to support both finishing and roughing operations while maintaining stability. How quickly can inserts be changed on the Clamp Holder DCKNR by Teknik Makina? Insert changes on the Teknik Makina Clamp Holder are fast thanks to the accessible clamping screws and straightforward mount geometry, which minimizes tool change time and machine downtime. Who can provide support if I need help selecting inserts for the Teknik Makina Clamp Holder? METAV Werkzeuge offers expert advice for the Teknik Makina Clamp Holder DCKNR 2525; contact their team via info@metav-werkzeuge.com or +49 2822 7131930 for application recommendations and technical data. 75° CNMG 1204 DCKNR 2525 Clamp Holder, 150mm, M12 - Teknik Makina

Turning Holder (Klemmhalter) — PCLN for CNMG Indexable Inserts The Turning Holder (Klemmhalter) is a precision toolholder designed for turning operations with CNMG 1204 indexable inserts, providing stable clamping and consistent cutting geometry for workshop machining applications. Turning Holder PCLN for CNMG 1204 inserts ISO designation PCLNL 1616 compatible 100 mm Total Length for stable support 95° Cutting Angle for precise left-hand turning 16 x 16 mm shank for compact setups Precision Clamping for Consistent Cuts The Turning Holder delivers secure clamping tailored to CNMG 1204 inserts, which translates into repeatable machining accuracy and reduced insert movement under load. Built to accommodate the standard PCLNL 1616 interface, this holder minimises tool chatter and ensures that the cutting edge maintains its position throughout the cut. For users unfamiliar with toolholder terminology: the ISO designation indicates the holder's shank and clamp geometry, ensuring compatibility with matching insert types. Compact Design That Improves Accessibility A compact 16 x 16 mm shank and a 100 mm Total Length allow the holder to reach confined workzones without sacrificing rigidity, making it suitable for small-lathe and toolroom operations where access is limited. The reduced projection helps lower bending moments on the tool, which directly improves surface finish and tool life. This design advantage benefits machinists who require both reach and control in tight setups. Geometry Optimised for Left-Hand Turning Engineered with a 95° Cutting Angle and left-hand cutting direction, the holder positions CNMG inserts at an effective attack geometry for common turning tasks. The cutting-head width of 20 mm supports stable insert seating and efficient chip flow. For operators, this means predictable cutting forces and easier planning of feed and speed parameters; for less experienced users, the clear geometry reduces setup iterations. Robust Compatibility and Workshop Efficiency Compatibility with CNMG 1204 inserts and the clear ISO marking simplify inventory management and reduce setup errors. The holder's clamping concept prioritises quick insert changes while maintaining a firm grip under varying cutting conditions. As a result, cycle times can be optimised by reducing downtime for tool replacement, an efficiency gain for production-focused shops. Intended Users and Typical Applications This Turning Holder is aimed at professional machinists and small-to-medium production shops that work with indexable carbide inserts for steel and general-purpose turning. Its combination of compact dimensions, standardised ISO interface, and dependable clamping makes it particularly suitable for precision finishing, profiling, and internal facing operations where tool stability and repeatability matter most. Choose Teknik Makina’s Turning Holder for reliable, workshop-proven clamping and contact METAV Werkzeuge for personalised technical advice and ordering support — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Technical Data Designation: Turning Holder Brand: Teknik Makina SKU: P139TM For Inserts: CNMG 1204 Compatible Inserts: CNMG 1204 Total Length: 100 mm Weight: 0.225 kg ISO Designation: PCLNL 1616 Alternate Designation: H12 Width: 16 mm Height: 16 mm Cutting Head Width: 20 mm Cutting Angle: 95° Cutting Direction: left GTIN: 4061905149856 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder from Teknik Makina is designed for CNMG 1204 indexable inserts, ensuring straightforward compatibility with that insert size and seating profile. How does the PCLNL 1616 ISO designation affect setup? The PCLNL 1616 ISO designation on the Teknik Makina Turning Holder identifies the shank and clamp geometry, which helps match the holder to inserts and reduces setup errors during tool change. Is the Turning Holder suitable for tight workspaces? Yes, the Turning Holder’s 16 x 16 mm shank and 100 mm total length make the Teknik Makina holder well-suited for confined setups where reach and rigidity are both required. Can METAV Werkzeuge provide additional technical support for this Turning Holder? METAV Werkzeuge offers expert advice for the Teknik Makina Turning Holder and can assist with technical data, application recommendations, and order support via info@metav-werkzeuge.com or +49 2822 7131930. 100mm PCLN Turning Holder for CNMG Indexable Inserts, PCLNL 1616, 95° Left Cut - Teknik Makina

Turning Holder PCLNR 2525 – PCLN Turning Holder for CNMG 1204 Inserts by Teknik Makina The Turning Holder PCLNR 2525 is a right-hand clamping tool for CNMG 1204 indexable inserts, engineered for stable, high-precision turning operations in professional workshops and CNC lathes. Turning Holder PCLNR 2525 for CNMG 1204 inserts Overall length 150 mm for secure reach 95° cutting angle for stable cutting 25 × 25 mm shank for rigid mounting Right-hand cutting direction for turning Consistent clamping for reliable machining results Designed to deliver repeatable performance, this Turning Holder clamps CNMG 1204 inserts securely to minimize vibration and edge deflection. The robust clamping geometry supports stable chip formation and surface finish, which reduces rework and improves cycle-time consistency. For operators, this means fewer adjustments and more predictable output on production runs. Compact dimensions with proven tool geometry With an overall length of 150 mm and a 25 × 25 mm shank, the holder combines compactness with stiffness. The 95° approach angle and 32 mm cutting head width provide a controlled cutting geometry that suits facing and light to medium turning tasks. The ISO code PCLNR 2525 indicates a square shank profile that simplifies fixture selection and ensures compatibility with standard tool posts. Made for professional shops and CNC setups This Turning Holder is intended for machinists, maintenance workshops and small-batch production environments that require dependable indexable tooling. Its design focuses on operational efficiency: fast insert changes with minimal set-up time and compatibility with widely used CNMG 1204 inserts make it suitable for a variety of steels and cast materials. For team workflows, it supports consistent quality across shifts. Practical mounting and compatibility details The clamping screw thread specified as M12 enables secure attachment and easy maintenance. The holder’s right-hand cutting direction matches common lathe configurations and reduces setup errors when replacing tools. Installation follows standard mounting practices for PCLN-type holders: ensure correct seating of the CNMG insert, tighten the clamp screw to the recommended torque, and verify clearance before the first cut. Choose the Teknik Makina Turning Holder PCLNR 2525 for dependable turning performance and contact METAV Werkzeuge for personalized technical advice and support — eMail: info@metav-werkzeuge.com • Phone: +49 2822 7131930 • WhatsApp: +49 170 2837271 Technical Information Designation: Turning Holder Brand: Teknik Makina SKU: P132TM For indexable inserts: CNMG 1204 ISO designation: PCLNR 2525 Overall length: 150 mm Shank width: 25 mm Shank height: 25 mm Cutting head width: 32 mm Cutting height: 30 mm Cutting angle: 95° Cutting direction: right Clamping screw thread: M12 GTIN: 4061905149832 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder PCLNR 2525 from Teknik Makina? The Turning Holder PCLNR 2525 is designed for CNMG 1204 indexable inserts; use inserts sized CNMG 1204 and follow the insert manufacturer’s recommendations for grade and geometry to match the machining task. Can the Teknik Makina Turning Holder PCLNR 2525 be used on CNC lathes? Yes, the Turning Holder PCLNR 2525 is suitable for CNC lathes and manual lathes alike; its 25 × 25 mm shank and standard PCLNR mounting make it compatible with common tool posts and turret systems. How is the CNMG insert secured in the Turning Holder PCLNR 2525? The CNMG 1204 insert is clamped using the holder’s M12 clamping screw; ensure the insert sits flush in the pocket and tighten the screw to the recommended torque to achieve secure, vibration-resistant clamping. Who can provide technical support or further compatibility advice for the Turning Holder PCLNR 2525? METAV Werkzeuge offers expert consultation for the Turning Holder PCLNR 2525 and other Teknik Makina tools — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored assistance. 95° PCLNR 2525 Turning Holder for CNMG 1204, 150mm - Teknik Makina

Turning Holder PCLNL 2020 — PCLN for CNMG Indexable Inserts from Teknik Makina The Turning Holder PCLNL 2020 is a left-hand Turning Holder engineered for CNMG 1204 Indexable Inserts, delivering stable performance for turning operations at a 95° cutting angle. Compatible with CNMG 1204 Indexable Inserts 125 mm Overall Length for versatile reach Integrated Internal Cooling for improved Tool Life 95° Cutting Angle for precise Left-hand Cutting Compact 20 × 20 mm Shank for stable clamping Robust clamp design for reliable chip-cutting performance The PCLNL 2020 Turning Holder combines a solid Clamp Mechanism with a compact Shank to provide consistent Cutting results. Its construction focuses on dimensional stability and repeatability, so toolpaths remain accurate even under intermittent cuts. The integrated Internal Cooling supports Temperature Control at the cutting zone and helps prolong Insert Life by evacuating heat and chips more effectively. Precision geometry that simplifies setup and machining A defined 95° Cutting Angle and a dedicated seat for CNMG 1204 Inserts reduce alignment iterations and make insert changes straightforward. This geometry offers predictable cutting forces and improves surface finish with minimal manual adjustment. For operators seeking efficient setup, the holder’s ISO designation PCLNL 2020 and standardized mounting dimensions help integrate it into existing tool systems with little modification. Built for workshops that demand compact yet powerful tooling With a 125 mm Overall Length and a 20 mm Shank profile, the holder suits compact lathes and toolposts where space is limited but machining demands remain high. The compact dimensions combine with a sturdy clamping screw and lever design to ensure the Insert remains secure during heavy cuts. This balance of Size and Stability supports consistent cycle times and dependable part quality. Clear compatibility and simple maintenance for production use Designed specifically for CNMG 1204 Indexable Inserts, the holder accepts standard Insert types and common clamping hardware (Klemmschraube TH821, Kniehebel TL4). Routine maintenance is straightforward: access to the clamping screw and lever is direct, and the presence of Internal Cooling reduces residue buildup at the Insert seat, lowering the frequency of cleaning and adjustment. We recommend choosing the Teknik Makina Turning Holder PCLNL 2020 for demanding turning tasks—contact METAV Werkzeuge for expert guidance and tailored advice: eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Technical Data Designation: Klemmhalter (Turning Holder) Brand: Teknik Makina SKU: AP140TM Compatible Inserts: CNMG 1204 Suitable For Inserts: CNMG 1204 Overall Length: 125 mm Weight: 0.428 kg Allen Key: 3 Allen Internal Cooling: Yes ISO Designation: PCLNL 2020 Secondary Designation: K12-IKG1/8 Width: 20 mm Height: 20 mm Cutting Head Width: 25 mm Clamp Screw: TH821 Knee Lever: TL4 Pin: TS-4 Cutting Height: 28 mm Cutting Direction: Left Cutting Angle: 95° Tool Plate: TA016-1 GTIN: 4061905150319 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Klemmhalter (Turning Holder) from Teknik Makina? The Klemmhalter (Turning Holder) by Teknik Makina is designed for CNMG 1204 Indexable Inserts; using these Inserts ensures correct seat contact and expected cutting geometry for optimal performance. Does the Klemmhalter include internal cooling and how does it help? Yes, the Klemmhalter (Turning Holder) from Teknik Makina features Internal Cooling; this reduces heat at the cutting edge and helps extend Insert Life while improving chip evacuation during continuous machining. Is the PCLNL 2020 suitable for small lathes and compact setups? The PCLNL 2020 Turning Holder by Teknik Makina has a 125 mm Overall Length and a 20 × 20 mm Shank, making the holder well suited for compact machines where stable clamping and limited space are important. Who can help if I need technical advice about the Klemmhalter? If additional technical data or application advice is required for the Klemmhalter (Turning Holder) from Teknik Makina, METAV Werkzeuge offers comprehensive consultation—contact info@metav-werkzeuge.com or call +49 2822 7131930 for support. 125mm PCLNL 2020 Turning Holder for CNMG 1204 Indexable Inserts, 95° Cutting Angle, Left, Internal Coolant - Teknik Makina

Klemmhalter — Turning Holder by Teknik Makina The Klemmhalter Turning Holder is a robust clamping solution designed for left-hand turning operations with CNMG 1204 indexable inserts, delivering stable tool engagement and repeatable machining results. For CNMG 1204 indexable inserts 170 mm overall length 95° cutting angle for stable cuts 32 x 32 mm shank for rigid clamping Left-hand cutting direction Robust Construction for Reliable Machining Built for consistent performance, this Turning Holder features the PCLNL 3232 ISO designation and a 170 mm overall Length that supports stable tool Overhang and reduced vibration. Operators benefit from improved surface Finish and longer Insert Life because the design minimizes deflection under load. The compact Schneidkopf Width contributes to predictable chip flow and easier tool setup in confined turret stations. Precise Compatibility and Secure Clamping Engineered specifically for CNMG 1204 Indexable Inserts, the Holder’s 32 mm Shank Width and 32 mm Shank Height ensure Rigid Clamping and repeatable seating of the Insert pocket. This stability translates into consistent Cutting Forces and less rework on turned Parts. Installers will find alignment straightforward, reducing Setup Time and enabling faster spindle ramp-up in production cycles. Cutting Geometry That Improves Cycle Quality With a 95° Cutting Angle and left-hand orientation, the toolholder guides the Insert to deliver predictable chip formation and improved Dimensional Control on internal and external Turning. The geometry is optimised for chip evacuation and steady cutting engagement, which helps maintain tool-edge integrity and consistent surface Finish across longer runs. Ideal Users and Application Scenarios This Turning Holder is aimed at Precision Workshops, CNC Turning Centers, and maintenance teams that demand dependable Turning performance with CNMG Inserts. It suits serial production as well as one-off repair jobs where tool Stability and quick Insert changes matter. Integration into existing toolline setups is straightforward thanks to the standard ISO designation and compact Schneidkopf dimensions. Choose Teknik Makina’s robust Klemmhalter Turning Holder for dependable CNMG 1204 clamping — for technical advice and application support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Bezeichnung: Klemmhalter Brand: Teknik Makina SKU: P144TM Compatible Inserts: CNMG 1204 ISO Designation: PCLNL 3232 Additional Designation: P12 Overall Length: 170 mm Shank Width: 32 mm Shank Height: 32 mm Schneidekopf Breite: 40 mm Cutting Angle: 95° Cutting Direction: left Weight: 1.429 kg GTIN: 4061905149887 EClass: 21181004 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Klemmhalter Turning Holder from Teknik Makina? The Klemmhalter Turning Holder by Teknik Makina is designed for CNMG 1204 indexable inserts, providing precise seating and compatibility with standard CNMG geometries. Is this Turning Holder suitable for left-hand operations only? Yes, the Teknik Makina Klemmhalter Turning Holder is specified for left-hand Cutting Direction and is optimised for stable engagement in such turning applications. What are the key dimensions to check for turret compatibility? Check the Holder’s Overall Length of 170 mm and the Shank dimensions of 32 x 32 mm; these values ensure the Teknik Makina Turning Holder fits common turret setups that accept PCLNL-style toolholders. Can METAV Werkzeuge advise on integrating this Klemmhalter into my toolline? Absolutely, METAV Werkzeuge offers competent technical consultation for the Teknik Makina Klemmhalter Turning Holder—contact them at info@metav-werkzeuge.com or +49 2822 7131930 for tailored support. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#P144TM","sku":"P144TM","mpn":"PCLNL 3232","gtin13":"4061905149887","name":"Turning Holder PCLNL 3232 95° PCLN for CNMG Indexable Inserts","description":"170 mm turning holder for CNMG 1204 indexable inserts, 95° cutting angle, left-hand, 32×32 mm head, aluminium construction.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/07/8d/e2/62/62e28d07530023baaa126af2/p136tm-main.jpg"],"author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"PCLN for CNMG Indexable Inserts"},{"@type":"Thing","name":"Turning Holder"},{"@type":"Thing","name":"Left-Hand Cutting Tools"}],"mentions":[{"@type":"Thing","name":"CNMG 1204 Inserts"},{"@type":"Thing","name":"P12"},{"@type":"Thing","name":"32 mm Width Head"}],"additionalProperty":[{"@type":"PropertyValue","name":"Overall length","value":"170 mm"},{"@type":"PropertyValue","name":"Compatible inserts","value":"CNMG 1204"},{"@type":"PropertyValue","name":"ISO designation","value":"PCLNL 3232"},{"@type":"PropertyValue","name":"Head width","value":"32 mm"},{"@type":"PropertyValue","name":"Head height","value":"32 mm"},{"@type":"PropertyValue","name":"Cutting head width","value":"40 mm"},{"@type":"PropertyValue","name":"Cutting angle","value":"95°"},{"@type":"PropertyValue","name":"Cutting direction","value":"Left-hand"},{"@type":"PropertyValue","name":"Weight","value":"1.429 kg"},{"@type":"PropertyValue","name":"Manufacturer","value":"Teknik Makina"}],"image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/07/8d/e2/62/62e28d07530023baaa126af2/p136tm-main.jpg"],"dateModified":"2026-04-16T12:00:00+01:00"},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What is the overall length of the holder?","acceptedAnswer":{"@type":"Answer","text":"Overall length 170 mm."}},{"@type":"Question","name":"Which inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"Compatible with CNMG 1204 indexable inserts."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"Cutting angle is 95°."}},{"@type":"Question","name":"Is the holder left- or right-hand?","acceptedAnswer":{"@type":"Answer","text":"This is a left-hand holder."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"ISO designation PCLNL 3232."}},{"@type":"Question","name":"What are the head dimensions?","acceptedAnswer":{"@type":"Answer","text":"Head width 32 mm and head height 32 mm."}}]},{"@type":"ItemPage","url":"https://metav-shop.de","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder PCLNL 3232"},{"@type":"Thing","name":"Teknik Makina Tooling"}],"mentions":[{"@type":"Thing","name":"CNMG 1204 Inserts"}]}]}

Turning Holder (Klemmhalter) — PCLN for CNMG Indexable Inserts by Teknik Makina The Turning Holder is a robust PCLN tool holder designed for CNMG 1204 indexable inserts, providing secure clamping and reliable performance for left-hand turning operations. Compatible with CNMG 1204 indexable inserts Internal coolant for improved chip evacuation ISO PCLNL 2525 profile for stable clamping 150 mm overall length for standard toolposts Left-hand cutting with 95° cutting angle Precision clamping for consistent machining results A toolholder that delivers repeatable results reduces setup time and scrap. The Turning Holder uses the ISO PCLNL 2525 profile to ensure stable clamping of CNMG 1204 inserts, so the insert seat remains rigid under cutting forces. This design focus translates into more consistent diameters and surface finishes on turned parts, which is particularly valuable for batch production and tight-tolerance workpieces. Improved chip control thanks to internal coolant Internal coolant is integrated to support continuous cutting processes and better thermal control at the cutting edge. By directing coolant through the shank toward the insert pocket, this holder improves chip evacuation and coolant delivery, reducing built-up edge and extending insert life. Workshops that run medium to long cycles will benefit from reduced tool wear and fewer unscheduled tool changes. Standard dimensions for effortless integration into setups With a 150 mm overall length and a 25 x 25 mm shank, the holder fits common toolposts and fixtures without the need for custom adapters. The 32 mm cutting head width and 30 mm cutting height are matched to CNMG 1204 geometry, while the 95° cutting angle and left-hand orientation suit a wide range of turning applications. These standardized dimensions make retrofitting and tool inventory management straightforward. Practical handling and maintenance on the shop floor Installation and routine maintenance are simplified: the clamping screw specification TH821 and the supplied Allen key requirement (3 Allen) make insert changes fast and reliable. Technicians will appreciate the clear access to the clamping elements and the robust mechanical components like the TL4 lever and TS-4 dowel pin, which support repeatable seating and torque behaviour. This holder is engineered for everyday use in demanding machining environments. Highly recommend Teknik Makina’s Turning Holder for workshops seeking durable, coolant-capable holders — contact METAV Werkzeuge for personalised technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Specifications Bezeichnung: Klemmhalter Marke / Hersteller: Teknik Makina SKU: AP142TM For indexable inserts: CNMG 1204 Compatible inserts: CNMG 1204 Overall length: 150 mm Weight: 0.781 kg Allen key: 3 Allen Internal coolant: Yes ISO designation: PCLNL 2525 Secondary designation: M12-IKG1/8 Width: 25 mm Height: 25 mm Cutting head width: 32 mm Clamping screw: TH821 Knee lever: TL4 Cutting direction: left Cutting angle: 95° Cutting height: 30 mm GTIN: 4061905150326 Label: Klemmhalter PCLNL 2525 95° CNMG 1204 Condition: new Availability: in Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and which sizes are supported? The Turning Holder from Teknik Makina is designed specifically for CNMG 1204 indexable inserts; the holder geometry and pocket dimensions match CNMG 1204 to ensure correct seating and cutting clearance. Does the Teknik Makina Turning Holder provide coolant to the cutting edge? Yes, the Teknik Makina Turning Holder includes internal coolant to improve coolant delivery and chip evacuation, which supports longer insert life and more stable cutting conditions. Which tools are required to change inserts in the Turning Holder? Insert changes and clamping adjustments for the Turning Holder typically require a 3 Allen key for the clamping screw TH821; this makes routine maintenance quick and predictable. Is the Turning Holder suitable for left-hand turning operations? The Turning Holder is configured for left-hand cutting with a 95° cutting angle, making it suitable for applications that require left-direction machining on standard lathes. Who can I contact for further technical details or personalised advice on the Turning Holder? For detailed application support, METAV Werkzeuge offers expert consultation on the Turning Holder by Teknik Makina; contact info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271. 150mm PCLNL 2525 Turning Holder, 95° Cut Angle, Internal Cooling, For CNMG 1204 Inserts - Teknik Makina

Turning Holder — PCLN for CNMG Indexable Inserts Turning Holder by Teknik Makina is a robust toolholder designed to secure CNMG 1204 indexable inserts for precise external turning operations. PCLNR 2525 for CNMG 1204 inserts 150 mm overall length for extended reach Internal coolant for improved chip evacuation 25 x 25 mm shank for stable turning 95° cutting angle for right-hand operations Precision and Rigidity for Accurate Turning Built for shops that demand repeatable results, this clamping tool combines Precision and Rigidity to minimise vibration and tool deflection during cuts. The PCLNR 2525 interface ensures a consistent seat for CNMG 1204 inserts, so each cut maintains dimensional accuracy and surface finish. Operators benefit from reliable clamping force and a geometrically stable setup that supports high-feed and finishing passes without compromising part tolerances. Optimised Cooling and Chip Control for Longer Insert Life Equipped with Internal Coolant, the holder channels cutting fluid directly to the cutting edge, promoting efficient Chip Control and reducing built-up edge on the insert. Enhanced cooling lowers cutting temperatures, which can extend insert life and reduce wear rates. This feature is particularly useful for interrupted cuts or machining tougher steels, where thermal management directly impacts tool performance and process stability. Compact Dimensions that Improve Workshop Productivity The 25 x 25 mm shank and a 32 mm cutting head width deliver a compact, stiff package that fits common turret stations and reduces interference in tight setups. With a 150 mm overall length, the tool offers additional reach for machining deeper features while maintaining a stable cutting stance. These attributes contribute to quicker setup changes and fewer toolholder swaps, making daily shop routines more efficient. Intended Users and Typical Applications Designed for professional turning shops, maintenance workshops and production lines, this holder targets machinists who use CNMG 1204 inserts for medium to heavy turning tasks. The holder’s right-hand 95° cutting orientation and secure fixation make it suitable for external profiling, facing and light roughing operations. Users looking for a dependable toolholder that supports aggressive feeds without sacrificing surface quality will find this solution effective. For precise and dependable turning operations we recommend the Teknik Makina Turning Holder — contact METAV Werkzeuge for dedicated technical support via info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: AP132TM For Indexable Inserts: CNMG 1204 ISO Designation: PCLNR 2525 Designation 2: M12-IKG1/8 Overall Length: 150 mm Shank Width: 25 mm Shank Height: 25 mm Cutting Head Width: 32 mm Cutting Height: 30 mm Cutting Angle: 95° Cutting Direction: Right Internal Coolant: Yes Clamp Screw: TH821 Knee Lever: TL4 Roll Pin: TS-4 Allen Key: 3 Allen Weight: 0.781 kg GTIN: 4061905150296 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit this Turning Holder and who makes it? The Turning Holder by Teknik Makina is designed for CNMG 1204 indexable inserts and provides the PCLNR 2525 mounting interface for secure seating and precise positioning. Does the Turning Holder support coolant-through operation? Yes, the Teknik Makina Turning Holder features internal coolant to direct fluid to the cutting edge, improving chip evacuation and thermal control during machining. What are the key dimensions and who can advise on suitability? The holder has a 150 mm overall length with a 25 x 25 mm shank and a 32 mm cutting head width; for tailored advice on whether this Turning Holder matches your setup, METAV Werkzeuge offers expert consultation at info@metav-werkzeuge.com or +49 2822 7131930. Is the Turning Holder suitable for right-hand turning? Yes, the Teknik Makina Turning Holder is configured for right-hand cutting with a 95° cutting angle, making it suitable for standard external turning tasks. 150mm Turning Holder PCLNR 2525, 95° With Internal Coolant For CNMG 1204 - Teknik Makina

Clamp Holder PCLN for CNMG Indexable Inserts — Turning Holder by Teknik Makina The Clamp Holder PCLN for CNMG Indexable Inserts is a 95° Turning Holder with internal coolant, engineered for precise metal turning and reliable chip evacuation in professional workshops. Designed for CNMG 1204 indexable inserts 95° cutting angle for consistent surface quality Internal coolant for improved chip evacuation Stable PCLNR 1616 profile for secure clamping Achieve consistent surface quality with a 95° geometry The 95° Cutting Angle of this holder ensures repeatable geometry and helps produce flat, uniform surfaces on turning operations. By keeping the insert orientation stable, the tool reduces deflection and vibration, which translates into improved surface finish and fewer secondary operations. This benefit is particularly relevant for component runs where dimensional consistency matters. Internal coolant that extends tool life and improves chip control Equipped with internal coolant, the holder channels cooling fluid directly to the cutting edge, enhancing chip evacuation and reducing cutting temperatures. Lower temperatures decrease wear on the Insert and the Holder, which leads to longer Stand Time and more predictable tool life. For deep cuts or interrupted cuts, the internal coolant significantly reduces thermal stress and prevents built-up edge. Fast insert replacement and robust clamping for productivity The PCLN clamping concept combined with the PCLNR 1616 profile provides a secure seat for CNMG inserts and enables quick Insert changes with minimal rework. The clamping Screw TH818 and Lock Lever TL4 are engineered for easy access and reliable fixation, so downtime for tool change is reduced and process stability is increased. Shops benefit from shortened setup times and enhanced repeatability. Designed for professional workshops and diverse turning tasks This Turning Holder is aimed at professional Machine Shops and precision workshops that work with steel, stainless steel and cast materials. The tool’s compatibility with CNMG 1204 inserts and its 100 mm overall length make it suitable for general turning, facing and finishing tasks where stability and coolant supply are essential. The holder supports right-hand cutting direction and is a practical choice for serial production. Choose the Teknik Makina Clamp Holder PCLN for CNMG Indexable Inserts to improve machining stability and tool life — for expert advice and ordering contact METAV Werkzeuge at info@metav-werkzeuge.com, +49 2822 7131930 or WhatsApp +49 170 2837271. Technical Data Bezeichnung: Clamp Holder PCLN for CNMG Indexable Inserts Brand: Teknik Makina SKU: AP129TM For Indexable Inserts: CNMG 1204 / CNMG 09T3 Overall Length: 100 mm Weight: 0.236 kg Hex Key: 3 Allen Internal Coolant: Yes ISO Designation: PCLNR 1616 Secondary Designation: H12-IKG1/8 Width: 16 mm Height: 16 mm Cutting Head Width: 20 mm Clamping Screw: TH818 Lock Lever: TL4 Cutting Angle: 95° Cutting Direction: Right GTIN: 4061905150272 Manufacturer: Teknik Makina Manufacturer or Manufacturer for English: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person or Responsible Person for English: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Clamp Holder PCLN for CNMG Indexable Inserts by Teknik Makina (Turning Holder)? The Clamp Holder PCLN for CNMG Indexable Inserts from Teknik Makina accepts CNMG 1204 (and CNMG 09T3) indexable inserts, ensuring a precise fit and correct seating for stable cutting performance. Does the Teknik Makina Clamp Holder have internal coolant? Yes, the Teknik Makina Clamp Holder PCLN for CNMG Indexable Inserts is supplied with internal coolant channels to deliver cutting fluid directly to the cutting edge for better chip control and extended tool life. How long is the Clamp Holder and what are its dimensions? The Clamp Holder PCLN for CNMG Indexable Inserts comes with an overall length of 100 mm, a body width of 16 mm and a cutting head width of 20 mm, making it suitable for a range of turning setups. Can METAV Werkzeuge advise on compatibility and technical data for this Turning Holder? Absolutely — METAV Werkzeuge provides expert consultation for the Teknik Makina Clamp Holder PCLN for CNMG Indexable Inserts; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored support and additional technical information. 95° PCLNR 1616 Turning Holder for CNMG 1204, 100 mm, Internal Coolant - Teknik Makina

Turning Holder PCLNL 2020 for CNMG 1204 Indexable Inserts by Teknik Makina The Turning Holder PCLNL 2020 is a left-hand tool holder designed for secure clamping of CNMG 1204 indexable inserts, suitable for precise turning operations in metalworking. Compatible with CNMG 1204 insert geometry 125 mm overall length for extended reach PCLNL 2020 ISO designation for secure fit 95° cutting angle for stable left-hand cuts Engineered for consistently precise turning results The Turning Holder delivers predictable machining accuracy by combining a defined 95° cutting angle with a stable clamping interface for CNMG 1204 inserts. This results in consistent chip formation and repeatable cutting performance, reducing the need for frequent adjustments. For operators focused on dimensional accuracy, the tool holder's geometry supports fine finishing passes and reliable surface quality. Robust dimensions reduce vibration and improve tool life Designed with a 20 mm width and 20 mm height, and a 25 mm cutting-head width, the holder provides increased rigidity compared with narrower tool shanks. The 125 mm overall length enables access to deeper workpieces while maintaining stiffness that minimises chatter. These characteristics translate into longer insert Life and fewer regrinds, supporting uninterrupted production on demanding turning tasks. Compatibility and straightforward setup to save workshop time This PCLNL holder is specified for CNMG 1204 indexable inserts—an industry-standard insert format characterised by a 12 mm inscribed circle and reliable indexability. The ISO designation PCLNL 2020 indicates the holder style and cut direction, making selection and replacement straightforward for toolroom staff. For teams needing setup assistance or deeper technical data, Teknik Makina items are supported by METAV Werkzeuge’s expert service to ensure correct mounting and optimal cutting parameters. Practical benefits for production environments By using a dedicated left-hand holder, shops can standardise tool inventories for predictable left-hand turning operations, simplifying tool management and training. The precise seat and clamp interface reduce the risk of insert slippage under load, which protects both the Insert and the Workpiece. Backed by Teknik Makina’s manufacturing tolerances, this holder is aimed at professionals seeking consistent performance across batches and shifts. Strong recommendation: Choose the Teknik Makina Turning Holder PCLNL 2020 for reliable left-hand finishing operations and contact METAV Werkzeuge for tailored technical support at info@metav-werkzeuge.com or +49 2822 7131930, WhatsApp +49 170 2837271 Technical Specifications for Workshop Planning Bezeichnung: Turning Holder Brand / Hersteller: Teknik Makina SKU: P140TM Compatible Inserts: CNMG 1204 ISO Designation: PCLNL 2020 Secondary Designation: K12 Overall Length: 125 mm Shank Width: 20 mm Shank Height: 20 mm Cutting Head Width: 25 mm Cutting Direction: Left Cutting Angle: 95° Weight: 0.421 kg GTIN: 4061905149863 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Which inserts fit the Turning Holder PCLNL 2020 by Teknik Makina? The Turning Holder PCLNL 2020 from Teknik Makina is designed to accept CNMG 1204 indexable inserts; this holder provides the correct seat and clamp geometry to secure those inserts for left-hand turning. Is the Teknik Makina Turning Holder suitable for deep-reach turning? Yes, the Teknik Makina Turning Holder with a 125 mm overall length offers extended reach for deeper operations while maintaining rigidity suitable for finishing and semi-finishing cuts. How do I ensure correct mounting of the PCLNL 2020 Turning Holder? When installing the Teknik Makina Turning Holder PCLNL 2020, ensure the CNMG 1204 insert sits flush in the pocket and the clamp screw is torqued to the manufacturer’s recommendation; for further guidance, METAV Werkzeuge provides expert advice and setup support. Can I get technical assistance or spare parts for this Turning Holder from METAV Werkzeuge? METAV Werkzeuge supports Teknik Makina Turning Holder customers with consultation, setup help and spare-part sourcing—contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised assistance. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#P140TM","sku":"P140TM","mpn":"PCLNL 2020","gtin13":"4061905149863","name":"125mm PCLN for CNMG Indexable Inserts, 95° Left Cut - Teknik Makina","description":"Turning holder for CNMG 1204 indexable inserts, 125 mm overall length, 95° cut angle, left cutting direction, robust 20×20 mm shank.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/07/8d/e2/62/62e28d07530023baaa126af2/p136tm-main.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Type","value":"PCLN"},{"@type":"PropertyValue","name":"Compatible Inserts","value":"CNMG 1204"},{"@type":"PropertyValue","name":"Overall Length","value":"125 mm"},{"@type":"PropertyValue","name":"Shank Width","value":"20 mm"},{"@type":"PropertyValue","name":"Shank Height","value":"20 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"25 mm"},{"@type":"PropertyValue","name":"Cutting Angle","value":"95°"},{"@type":"PropertyValue","name":"Cutting Direction","value":"left"},{"@type":"PropertyValue","name":"Weight","value":"0.421 kg"},{"@type":"PropertyValue","name":"ISO Designation","value":"PCLNL 2020"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts does this holder accept?","acceptedAnswer":{"@type":"Answer","text":"Compatible with CNMG 1204 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 125 mm."}},{"@type":"Question","name":"What is the cut angle and direction?","acceptedAnswer":{"@type":"Answer","text":"95° cut angle with left cutting direction."}},{"@type":"Question","name":"What are the shank dimensions?","acceptedAnswer":{"@type":"Answer","text":"Shank width and height are 20 mm each."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Manufacturer is Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder"},{"@type":"Thing","name":"PCLN Series"},{"@type":"Thing","name":"CNMG 1204 Compatibility"}],"mentions":[{"@type":"Thing","name":"PCLNL 2020 ISO Designation"},{"@type":"Thing","name":"95° Cut Angle"},{"@type":"Thing","name":"Teknik Makina Manufacturer"}]}]}

Turning Holder PCLNR 3232 for CNMG 1204 Indexable Inserts by Teknik Makina The Turning Holder PCLNR 3232 is a robust tool holder designed for precision turning with CNMG 1204 indexable inserts on CNC lathes and manual turning machines. PCLNR 3232 ISO design ensures secure clamping Compatible with CNMG 1204 indexable inserts 170 mm overall length for stable overhang 95° cutting angle for consistent chip control Right-hand orientation for standard turning operations Precision clamping for repeatable results The Turning Holder PCLNR 3232 combines a proven ISO PCLNR 3232 configuration with a focus on Secure Clamping to minimise vibration and ensure repeatable tool position. By accepting CNMG 1204 indexable inserts, the holder allows quick insert changes and consistent tool geometry, which supports stable cutting performance and predictable surface quality. This results in fewer setup iterations and more efficient production runs. Compact dimensions that improve rigidity With an overall Length of 170 mm, a Width of 32 mm and a Height of 32 mm, the holder is engineered to reduce overhang and increase stiffness during turning operations. The Cutting Head Width of 40 mm and a Cutting Height of 30 mm contribute to a rigid interface between insert and holder, helping to extend Insert Life and improve dimensional accuracy. The specified proportions are particularly beneficial where reduced deflection is required. Practical orientation and everyday workshop use Designed for right-hand cutting, the holder's Right-hand configuration and 95° Cutting Angle enable predictable chip flow and clearance for many standard turning tasks. The straightforward ISO mount simplifies retrofitting into existing toolposts and turret systems. If additional technical data or advice is needed to verify fitment or application, METAV Werkzeuge offers competent consultation to support selection and integration. Compatibility explained for quick understanding This holder is specified for CNMG 1204 indexable inserts, indicating the compatible insert Geometry and Seat Dimensions used with many turning applications. The ISO designation PCLNR 3232 identifies the holder style and clamping method as provided by the Manufacturer. For users less familiar with holder nomenclature, the key takeaway is: this product supports widely used CNMG inserts and provides a stable, ISO-standard mounting for efficient turning operations. Strong recommendation: The Turning Holder from Teknik Makina is an excellent choice when stable, repeatable turning is required — for further technical advice or to confirm suitability, contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Bezeichnung: Turning Holder Brand: Teknik Makina SKU: P134TM Alternate designation: PCLN for CNMG Indexable Inserts Compatible inserts: CNMG 1204 Overall length: 170 mm Weight: 1.429 kg ISO designation: PCLNR 3232 Secondary designation: P12 Width: 32 mm Height: 32 mm Cutting head width: 40 mm Cutting height: 30 mm Cutting direction: right Cutting angle: 95° GTIN: 4061905149849 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder PCLNR 3232 by Teknik Makina and what does that mean? The Turning Holder PCLNR 3232 by Teknik Makina is designed for CNMG 1204 indexable inserts, which means the holder accepts inserts with that seat and thickness specification to ensure correct clamping and cutting geometry. Is the Turning Holder PCLNR 3232 suitable for CNC lathe use? Yes, the Turning Holder PCLNR 3232 from Teknik Makina is suitable for CNC lathe operations; its 170 mm overall length and rigid ISO design provide the stability needed for precision turning tasks. Can the Turning Holder PCLNR 3232 be used for left-hand turning? The Turning Holder PCLNR 3232 by Teknik Makina is specified with a right-hand cutting direction; for left-hand operations, a corresponding left-hand holder should be selected. Where can I get technical support for the Turning Holder PCLNR 3232 from Teknik Makina? For technical support or to confirm that the Turning Holder PCLNR 3232 by Teknik Makina meets specific application requirements, contact METAV Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930. 170mm PCLN Turning Holder for CNMG 1204 Inserts, 95° - Teknik Makina

Technical Data: Order Number: P129TM Item: Turning Holder usable with CNMG 1204 Indexable Inserts Brand: Teknik Makina ISO Code: PCLNR 1616 H12 Numbers and Data: Weight: 0.225kg Total length: 100mm Cutting Height: 30mm Additional Informattion Cutting Direction: rechts Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Klemmhalter — Turning Holder for CNMG Indexable Inserts by Teknik Makina The Klemmhalter Turning Holder is a left-hand toolholder engineered for CNMG 1204 indexable inserts, providing secure clamping and consistent performance in precision turning operations. Compatible with CNMG 1204 Inserts 150 mm overall length for stable reach PCLNL 2525 ISO designation 95° Cutting Angle for accurate facing 25 × 25 mm shank for secure clamping Precise Cutting Geometry for Consistent Results The clamping design delivers a 95° cutting angle that supports accurate facing and shoulder turning with minimal tool deflection. By pairing the holder with CNMG 1204 indexable inserts, users benefit from repeatable cutting positions and straightforward insert indexing, which reduces setup time. The left-hand orientation and rigid 25 × 25 mm shank contribute to vibration damping, so each pass produces clean surfaces and predictable tool life. Robust Design for Industrial Applications Manufactured to the PCLNL 2525 ISO form, this holder combines compact dimensions with a solid Schneidekopf Breite of 32 mm to handle demanding operations. The 150 mm overall length balances accessibility and rigidity, making the tool suitable for both short overhang turning and moderate reach tasks. These features make the holder well suited for job shops and production environments that require reproducible results without frequent rework. Easy Integration and User Advantages Installation is straightforward thanks to the standardized ISO designation and the clear specification of mounting parameters (Bezeichnung 2: M12). Technicians benefit from fast insert changes and reliable clamping force, which lowers downtime and simplifies tool inventory. The holder’s geometry supports precise chip control when paired with appropriate inserts, helping to maintain cycle times and reduce tool-change frequency. Who Benefits Most from This Toolholder This Turning Holder is aimed at machinists and production engineers seeking a dependable solution for external turning and facing with CNMG inserts. Its compact build and solid clamping characteristics make it a practical choice for medium-duty turning tasks, repeat production runs, and retrofit tool setups where consistent accuracy and quick insert changes are priorities. Strong recommendation: Choose the Teknik Makina Klemmhalter Turning Holder for reliable left-hand turning performance and efficient compatibility with CNMG 1204 inserts — for detailed advice or application support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Technical Specifications Bezeichnung: Klemmhalter Brand: Teknik Makina SKU: P142TM Compatible Inserts: CNMG 1204 Overall Length: 150 mm Weight: 0.766 kg ISO Designation: PCLNL 2525 Secondary Designation: M12 Width: 25 mm Height: 25 mm Cutting Head Width: 32 mm Cutting Angle: 95° Cut Direction: left-hand GTIN: 4061905149870 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Teknik Makina Klemmhalter Turning Holder? The Teknik Makina Klemmhalter Turning Holder is designed for CNMG 1204 indexable inserts; using these standard inserts ensures correct seating and repeatable cutting geometry for turning and facing operations. Is the holder suitable for left-hand cutting only? Yes, the Klemmhalter Turning Holder is configured for left-hand cutting direction; this makes it suitable for operations and machine setups that require left-hand tool orientation. What mounting specifications are required for this toolholder? The holder follows the PCLNL 2525 ISO designation and uses an M12 secondary mounting interface, which allows straightforward installation on compatible toolposts and turret systems. How does the 150 mm length affect performance? A 150 mm overall length provides balanced reach and rigidity, allowing the Klemmhalter Turning Holder to access moderate overhangs while maintaining stability for consistent surface finish and tool life. Who can I contact for application support or further technical details? For application advice regarding the Klemmhalter Turning Holder by Teknik Makina, METAV Werkzeuge offers expert assistance — email info@metav-werkzeuge.com, call +49 2822 7131930 or reach out via WhatsApp at +49 170 2837271. 150mm Turning Holder PCLNL 2525 for CNMG 1204, 95° Cut, M12 — Teknik Makina