Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCGT 060200 SH725 Wendeplatten - Tungaloy
Efficient, edge-stable turning with the SH725 coated-carbide grade and an 80° rhombic geometry with 7° clearance ensures consistent performance even under varying engagement; straightforward replacement into ISO holders simplifies tool changes. Order the CCGT060200 SH725 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. CCGT060200 SH725 – CCGT indexable turning insert (80° rhombic, 7° clearance) by Tungaloy The CCGT060200 SH725 is an ISO-standard indexable insert for external and internal turning, designed for stable cutting-edge behaviour and reliable use in smaller tools or where engagement conditions vary. ISO-compliant rhombic 80° geometry 7° clearance for stable cutting SH725 coated carbide, edge-stable Cylindrical hole with 40°–60° countersink Consistent cutting performance for variable engagement The combination of a coated carbide grade SH725 with a rhombic 80° geometry delivers robust performance where entry conditions change. This grade is formulated for toughness and edge stability, reducing the risk of premature chipping during interrupted cuts or when tool overhangs vary. As a result, cycle times remain stable and tool life improves, which supports predictable throughput on production turning operations. The one-sided chipbreaker further assists by controlling chip formation for common turning tasks. Fast integration into ISO tool systems for reduced set-up time Compatibility with ISO holders is governed by form, clearance angle (7°), tolerance class, fastening, size and thickness; these parameters ensure that the insert fits correctly into standard external holders or boring bars. The CCGT design integrates easily with the usual system components—outer holder or boring bar, shim/clamp sets and replacement screws—so changeovers are straightforward and toolroom downtime is minimised. Clear geometric standards make replacement repeatable and maintain concentricity during reassembly. Material coverage and chip control explained simply The SH725 grade is optimised for a broad range of turning tasks where a tough, edge-stable carbide performs best. Selecting the matching chipbreaker and grade helps to balance surface finish and tool life: the one-sided chipbreaker is appropriate for many external turning operations and contributes to controlled chip flow. For unfamiliar terms: a chipbreaker alters the chip shape, reducing entanglement and heat concentration, which in turn protects the cutting edge and workpiece finish. Practical mounting details and handling benefits The insert is supplied in the ISO CCGT060200 form with a cylindrical hole plus a single-side countersink (40°–60°), and a plate thickness of 2.38 mm, enabling secure clamping and reliable torque transmission. The 80° included angle offers favourable clearance in shoulder and profiling cuts while maintaining an ample cutting edge; the rhombic plate shape gives two usable cutting corners per index, improving economy. These construction details make the insert suitable for standard turning set-ups in workshop and production environments. Contact Metav Werkzeuge for a compatibility check and quotation referencing TUN6838670 for prompt supply and technical advice Technical data Article number: 6838670 Manufacturer SKU: TUN6838670 Stock SKU: 6838670-Tungaloy Name: CCGT060200 SH725 Facts Application: Turning Geometry: 80° Clearance angle: 7° Plate size: 06 Thickness: 2.38 mm Hole style: cylindrical hole + single-side countersink (40°–60°) Special features Coated carbide grade SH725 One-sided chipbreaker ISO-standard indexable insert Rhombic plate shape Compatible with ISO holders, boring bars, shims and clamps FAQ What operations is this insert best suited to? The CCGT060200 SH725 indexable insert is intended for external and internal turning where a tough, edge-stable coated carbide performs well, particularly in variable engagement conditions. How does the geometry affect tool life? The 80° rhombic geometry and 7° clearance of this insert distribute cutting forces effectively, improving edge stability and contributing to longer, more predictable tool life for the insert. Is the hole style important for mounting? Yes, the cylindrical hole with a single-side countersink (40°–60°) ensures secure clamping in compatible ISO holders and boring bars; the feature is standard on the CCGT060200 SH725 for consistent mounting. Which materials can be machined with this grade? The SH725 coated-carbide grade is designed as a tough, edge-stable option for a wide range of turning tasks; selection of chipbreaker and cutting data should match the actual workpiece material and machining conditions when using the CCGT060200 SH725. What identification should be given when requesting supply? Reference the manufacturer SKU TUN6838670 or article number 6838670 when enquiring about the CCGT060200 SH725 to ensure precise identification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060200 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of SH725 coated carbide toughness, ISO-standard compatibility and a secure mounting with a cylindrical hole plus single-sided countersink for consistent turning performance; order the insert directly via Metav Werkzeuge or ask our consultants if needed. CCGT 060200 SH725 CCGT turning insert for turning — Tungaloy A CCGT 060200 SH725 indexable turning insert designed for ISO-standard turning applications, offering a rhombic profile and robust edge stability for variable engagement conditions. Coated carbide grade SH725 ISO CCGT 060200 format 7° clearance, 80° rhombic profile Cylindrical hole with countersink Consistent cutting performance under changing conditions The SH725 grade is a coated carbide engineered for edge stability and toughness, providing reliable tool life where engagement conditions vary. This insert supports productive turning on ISO-compatible toolholders by combining a wear-resistant substrate with a protective coating that delays flank and crater wear. The result is a measurable improvement in machining stability and a reduced need for unscheduled insert changes, which translates into higher process efficiency and fewer interruptions on the shop floor. Secure clamping and precision fit for ISO holders Compatibility with holders depends on form, clearance angle, tolerance class, fastening, size and thickness; this insert is supplied in the ISO CCGT 060200 specification with a 7° clearance and 80° rhombic geometry that matches common external and internal turning holders. The cylindrical hole with a single-sided countersink (40°–60°) ensures a reproducible seating position and reliable torque transmission during clamping. Clear, standardised dimensions simplify tool assembly and minimise the risk of incorrect mounting in production. Better chip control and application guidance Equipped with a one-sided chipbreaker, the insert directs chip flow and helps to avoid entanglement in interrupted cuts or varying depths of cut. Selection of the chipformer and grade should follow the workpiece material and cutting strategy: the SH725 type favours operations where edge robustness is required, particularly with smaller tooling or fluctuating engagement. For operators and process engineers, this means fewer process adjustments and a more predictable finish when machining in mixed-production environments. System-level benefits and practical use The insert is part of an ISO insert system consisting of the indexable plate, a matching external holder or boring bar, a seating/locating set and replacement clamping screws. Because the insert uses a standardised format, spare-part logistics are simplified and tool changeover is faster. Regular inspection of the seating surface and correct torque on the fixing screw will maintain clamping reliability and cutting performance; replacement inserts can be stocked alongside holders to reduce machine downtime. Contact Metav Werkzeuge for tailored application advice on the SH725 grade CCGT insert and assistance with toolholder compatibility Technical data Article number: 6736997 Manufacturer SKU: TUN6736997 SKU: 6736997-Tungaloy Model series: ISO turning inserts Grade: SH725 Facts Included angle: 80° Clearance angle: 7° Thickness: 2.38 mm Size: 06 Countersink angle: 40°–60° Special features Coated carbide material Rhombic insert shape One-sided chipbreaker Cylindrical hole with single-sided countersink ISO-specification CCGT 060200 Intended use: turning FAQ What clamping style is required for this insert? The CCGT 060200 SH725 insert uses a cylindrical hole with a single-sided countersink, so holders that accept ISO CCGT inserts with that hole style will ensure correct seating and torque transmission. Which applications suit the SH725 grade best? The SH725-coated carbide grade is suited to turning operations where edge stability and toughness are required, particularly with smaller tools or when engagement conditions change frequently. Is the insert compatible with standard ISO toolholders? Yes, the insert follows the ISO CCGT 060200 format; compatibility is determined by form, clearance, tolerance, fastening, size and thickness, so matching holders to these specifications is recommended. How does the one-sided chipbreaker affect machining? The one-sided chipbreaker on the insert promotes controlled chip flow and reduced risk of chip entanglement, improving finish and process reliability in interrupted or variable cutting conditions. What should be checked during insert replacement? When fitting a new CCGT 060200 SH725 insert, verify the seating surface, correct clamping screw condition and the holder’s tolerance class to maintain repeatable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060200 SH730 Wendeplatten - Tungaloy
Consistent use of the SH730 coated carbide grade combined with the ISO‑standard CCGT060200 geometry delivers reliable cutting performance and stable tool life; compatibility with standard holders is ensured by matching form, relief angle and size. Order the CCGT060200 SH730 insert directly via Metav Werkzeuge or request application advice from the technical consultants. CCGT060200 SH730 Tungaloy indexable insert — coated carbide, rhombic 06 for turning The CCGT060200 SH730 is an ISO‑standard indexable insert for external and internal turning, featuring a rhombic 06 profile, a 7° relief angle and a cylindrical hole with a single‑side countersink. Coated carbide grade SH730 ISO CCGT060200 rhombic 06 geometry 7° relief for versatile engagement Cylindrical hole with single‑side countersink High process stability and measurable efficiency gains The rhombic 06 profile in ISO CCGT060200 form, paired with the SH730 coated carbide grade, is specified for applications where cutting‑edge stability and consistent results are required. The combination of coating and substrate reduces flank wear under varying engagement conditions, which in turn extends tool life and lowers the frequency of index changes. For production environments, this results in predictable cycle times and less unplanned downtime; the insert's geometry supports both external and internal turning operations with a focus on repeatable performance. Simple integration with standard holders reduces set‑up time Compatibility is defined by form, relief, tolerance class, clamping and thickness; the insert's 7° relief and rhombic shape allow seamless fitting into ISO‑compliant external holders or boring bars when those parameters are matched. The cylindrical hole, featuring a single‑side countersink (40°–60°), enables secure clamping and straightforward replacement using standard clamping sets and screws. This reduces set‑up complexity and supports fast tooling changes on the shop floor while maintaining repeatable positioning. Practical guidance for application and material selection The insert is intended for turning; selection of the single‑sided chipbreaker and the SH730 grade should be aligned with workpiece material, tool overhang and stability of the setup. The chipbreaker contributes to controlled chip formation and helps achieve consistent surface finish with stable cutting parameters. Where cutting conditions vary or smaller tools are used, the SH730 grade provides a balance of toughness and wear resistance to cope with intermittent engagement and fluctuating loads. Handling, inventory and procurement advantages With ISO‑standard designation and a compact rhombic form, the insert simplifies inventory management by fitting common holder systems that accept CCGT‑type inserts. The coated carbide construction gives a favourable economy of use in series production and smaller batch runs alike. Technical documentation should be consulted for correct tightening torques and clamping accessories; compatibility checks based on form, relief angle and thickness prevent misfits and help ensure the expected performance and safety in operation. Contact Metav Werkzeuge for application recommendations or to secure the CCGT060200 SH730 Tungaloy insert; technical advisors are available and orders can be placed via info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical Data Article number: 6854009 SKU: 6854009-Tungaloy Manufacturer SKU: TUN6854009 Designation: CCGT060200 SH730 Facts Size: 06 Thickness: 2.38 mm Relief angle: 7° Insert angle: 80° Countersink angle: 40°–60° Special features Coating / grade: SH730 Material: coated carbide Shape: rhombic (06) Chipbreaker: single‑sided Hole: cylindrical with single‑side countersink Application: turning (external and internal) Model series: ISO‑indexable turning inserts FAQ What is the main application for this insert? The CCGT060200 SH730 Tungaloy indexable insert (indexable turning insert, SKU 6854009-Tungaloy) is designed for external and internal turning operations; selection of chipbreaker and cutting parameters depends on workpiece material and stability. What characteristics define the SH730 grade? SH730 is a coated carbide grade offering enhanced cutting‑edge stability and toughness, suited to turning tasks where variable engagement or smaller tooling is encountered. How does the 7° relief angle affect machining? A 7° relief angle provides clearance between the insert and the workpiece flank, reducing rubbing and enabling stable cutting contact when the holder geometry and set‑up are correctly matched to the insert. Which holder features must be matched to ensure compatibility? Compatibility requires alignment of insert form, relief angle, tolerance class, clamping arrangement, size and thickness; the insert's cylindrical hole with single‑side countersink is designed for standard positive clamping solutions. Will this insert support consistent surface finish in production? When combined with an appropriate chipbreaker and optimised cutting data, the CCGT060200 SH730 insert delivers repeatable surface quality and process reliability suitable for series production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060200 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp TH10 uncoated cemented‑carbide grade, precise ISO CCGT060200 geometry and secure mounting features for consistent surface finish and reduced cutting forces; order via Metav Werkzeuge or contact our consultants for application advice. CCGT 060200 TH10 turning insert by Tungaloy — ISO rhombic 80° geometry, uncoated carbide CCGT 060200 TH10 is an ISO‑standard indexable turning insert designed for external and internal turning, offering a sharp universal grade for non‑ferrous materials and finishing tasks ISO CCGT insert, rhombic 80° form Sharp uncoated TH10 cemented‑carbide grade 7° relief angle and 2.38 mm thickness Cylindrical hole with single‑side countersink (40°–60°) Improved productivity through efficient cutting geometry The CCGT060200 TH10 insert combines an uncoated cemented‑carbide edge with an 80° rhombic geometry to deliver lower cutting forces and reliable edge engagement when turning non‑ferrous components. The sharp grade supports reduced thrust and improved surface integrity, which translates into fewer secondary operations and higher throughput. In practical terms, the uncoated TH10 grade encourages clean chip formation and favours finishing passes where minimal rubbing and low cutting temperatures are required, making it suitable for precision turning tasks. Secure clamping and ISO compatibility for predictable results Compatibility with a toolholder depends on form, 7° relief angle, tolerance class, fastening method, size and thickness; verifying these parameters avoids misfits and chatter. The ISO format of the insert simplifies selection: holders designed for the CCGT style accept the rhombic 80° shape and the 2.38 mm slab thickness for stable clamping. The central hole — cylindrical with a single‑side countersink (40°–60°) — ensures repeatable fastening and allows the use of standard screws and clamping sets, reducing setup time and minimising production downtime. Application benefits: chip control and surface quality for non‑ferrous work A single‑sided chipbreaker matched to the grade provides controlled chip formation for aluminium, brass and similar alloys, helping to avoid entangling or long stringy chips. The combination of geometry and sharp cutting edge improves finishing capability, yielding better surface roughness with fewer passes. When selecting inserts for a specific job, match the chipbreaker and grade to the workpiece material and machining stability to balance tool life and surface quality. For delicate turning operations, this specification offers a pragmatic balance between edge life and the low cutting forces required for high‑quality finishes. For reliable non‑ferrous turning with the TH10 uncoated cemented‑carbide insert, contact Metav Werkzeuge for tailored recommendations and application support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6801261 SKU: 6801261-Tungaloy Manufacturer SKU: TUN6801261 Designation: CCGT060200 TH10 Facts Included angle: 80° Relief angle: 7° Thickness: 2.38 mm Size: 06 With hole: yes Special features Material: cemented carbide Grade: TH10 (uncoated) Shape: rhombic Hole style: cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: single‑sided Application: Turning Compatibility: dependent on holder form, relief angle, tolerance class, fastening, size and thickness FAQ Which materials suit this insert best? The CCGT060200 TH10 insert is optimised for non‑ferrous materials such as aluminium and brass, and for applications that prioritise low cutting forces and clean surface finish. How can compatibility with a holder be confirmed? Check holder acceptance for the CCGT geometry, the 7° relief angle, size 06, 2.38 mm thickness and the central hole/countersink specification to ensure correct clamping and alignment. Is the TH10 grade coated? No, the TH10 grade is an uncoated cemented‑carbide formulation chosen to provide a sharp edge, lower cutting forces and improved finish on non‑ferrous alloys. What chip control can be expected? The single‑sided chipbreaker creates predictable chip shapes suitable for turning non‑ferrous work and supports consistent surface quality during finishing cuts. Can this insert be used for both external and internal turning? Yes — the ISO‑standard geometry and rhombic form make it suitable for both external and internal turning, provided the correct holder and clamping are used. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 060200 TH10 Wendeplatten - Tungaloy
Take advantage of the ISO-standard rhombic geometry and the uncoated carbide TH10 grade for efficient turning of non-ferrous materials; precise compatibility with standard toolholders ensures reliable insert clamping and repeatable performance. Order directly via Metav Werkzeuge or consult our team for application support. CCGT 060200 TH10 Turning insert — Tungaloy, ISO rhombic insert for general turning, 7° relief CCGT060200 TH10 is an ISO-indexable turning insert designed for external and internal turning; compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness. ISO‑standard rhombic geometry with 80° nose angle Uncoated carbide TH10 for low cutting forces 7° relief angle for general turning Cylindrical hole with 40°–60° countersink Reliable cutting performance for non-ferrous turning The uncoated carbide TH10 grade delivers a combination of sharp edge geometry and material properties that reduce cutting forces and support a clean surface finish when machining non-ferrous alloys. In practical terms, this means smoother feeds, reduced tendency for built-up edge and improved dimensional control during finishing passes. The rhombic geometry provides a stable cutting profile while the single-sided chipbreaker helps to form predictable chips when turning softer materials. Designed for straightforward mounting and repeatable clamping With an ISO-standard form and a cylindrical hole with one-sided countersink (40°–60°), the insert mates reliably with a wide range of standard external holders and boring bars. The 7° relief angle and the 2.38 mm thickness ensure sufficient clearance and mechanical strength for typical turning operations. Specifying inserts that match holder geometry and tolerance class reduces set-up time and improves repeatability across serial production or batch runs. Practical advantages for workshop productivity The rhombic CCGT profile with an 80° nose angle balances strength and versatility, making it suitable for both light finishing cuts and heavier profiling in appropriate materials. The TH10 grade, being uncoated, is particularly effective where a clean edge and low cutting resistance are priorities—examples include machining Messing (brass), aluminium and many other non-ferrous alloys. Choosing the correct chipbreaker and grade for the workpiece and machining stability will yield longer tool life and fewer part reworks. Selecting the right insert for the application Compatibility is determined by holder form, relief, tolerance class, fastening and the insert’s size and thickness; therefore, match the ISO 060200 designation and the plate dimensions when replacing or specifying inserts. For operations requiring predictable chip control and modest surface requirements, the uncoated TH10 is a cost-effective option that reduces cutting forces and simplifies downstream finishing. When in doubt about holder fitment or optimal grades for a specific material, technical consultation ensures the most economical and process-stable selection. Contact Metav Werkzeuge for application guidance on the Tungaloy CCGT060200 TH10 insert or to request delivery details by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Manufacturer: Tungaloy Manufacturer article number: 6801264 SKU: 6801264-Tungaloy Manufacturer SKU: TUN6801264 Model series: ISO turning indexable inserts Facts Nose angle: 80° Relief angle: 7° Thickness: 2.38 mm Size: 06 ISO code: 060200 Special features Uncoated carbide (Hartmetall) grade TH10 Rhombic plate shape Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) ISO-indexable turning insert Suitable for external and internal turning Compatibility defined by form, relief, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The CCGT060200 TH10 insert is optimised for non-ferrous materials such as brass and aluminium; the uncoated TH10 grade supports low cutting forces and a clean surface finish in these applications. How does the hole and countersink affect clamping? The cylindrical hole with a one-sided countersink (40°–60°) ensures secure, repeatable clamping in compatible holders and contributes to stable tool life for the Tungaloy turning insert. Can this insert be used for both external and internal turning? Yes, the ISO-indexable design and rhombic geometry make the insert suitable for both external and internal turning when paired with the correct holder and mounting hardware. What is the significance of the 7° relief angle? A 7° relief angle provides a balance between clearance and edge strength for general turning operations; it reduces rubbing while maintaining support for the cutting edge during finishing and medium-duty cuts. How to ensure correct replacement inserts are ordered? Match the ISO designation 060200, size 06, plate thickness 2.38 mm and the rhombic form when ordering replacements to guarantee compatibility with existing holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060200 TH10 Wendeplatten - Tungaloy
Benefit from the CCGT060200 TH10's combination of low cutting forces, clean surface generation and ISO compatibility for efficient turning of non‑ferrous materials; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CCGT060200 TH10 CCGT – ISO turning insert (uncoated carbide), Tungaloy The CCGT060200 TH10 is an ISO‑standard indexable insert for turning, optimised for non‑ferrous materials and applications that demand a sharp, uncoated cutting edge and reliable chip control. ISO‑standard rhombic 80° geometry Sharp uncoated cemented carbide cutting edge Single‑sided chipbreaker for clean finishes Cylindrical hole with countersink for secure clamping Precision turning with low cutting forces The insert delivers a sharp, uncoated cemented carbide edge that reduces cutting forces and improves surface quality when turning softer metals and alloys. Thanks to the rhombic 80° geometry and a modest 7° clearance, the insert provides a stable cutting engagement that supports consistent tool life and predictable process behaviour. The ISO standard designation simplifies indexing and replacement, ensuring compatibility with a wide range of ISO holders and toolposts and reducing setup time in production environments. Reliable chip control for cleaner parts and less rework A single‑sided chipbreaker on the cutting face is designed to separate and direct chips reliably, resulting in fewer tangles and easier part handling after machining. For applications where a clean finish is essential, this chip control contributes directly to reduced secondary operations. The combination of the chipbreaker geometry and the uncoated carbide grade offers an effective balance between chip formation and edge sharpness, particularly advantageous for turning aluminium, brass and other non‑ferrous materials. Secure clamping and repeatable positioning The insert features a cylindrical hole with a one‑sided countersink (40°–60°) that ensures positive and repeatable clamping in compatible toolholders. With a plate thickness of 2.38 mm and size 06, the insert fits standard ISO pockets where tolerance class, form and fastening method match — this improves process reliability and minimises the risk of misalignment during indexing. Clear mechanical clamping details translate into lower vibration and better surface integrity on finished parts. Application clarity and material suitability Designed specifically for turning tasks, the grade TH10 is an uncoated universal type that excels on non‑ferrous materials and where a sharp edge promotes low cutting forces and good surface quality. Selection of the correct chipbreaker and grade should align with workpiece material, machining strategy and machine stability. The insert therefore supports efficient, predictable machining cycles and is suitable for both single‑part production and serial manufacturing where consistency matters. Contact Metav Werkzeuge today to discuss how the CCGT060200 TH10 insert can be integrated into existing tool assemblies or to request tailored application recommendations from our technical team. Technical data Manufacturer article number: 6801262 SKU: 6801262-Tungaloy Manufacturer SKU: TUN6801262 Model series: ISO‑Drehwendeschneidplatten Name: CCGT060200 TH10 Tungaloy insert Core data Cutting edge angle: 80° Clearance (relief) angle: 7° Thickness: 2.38 mm Size designation: 06 Hole style: cylindrical hole + one‑sided countersink (40°–60°) Materials & features Material: cemented carbide (uncoated) Shape: rhombic Chipbreaker: single‑sided Application: turning Compatibility: ISO‑standard insert; compatibility depends on form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The TH10 grade in the CCGT060200 insert is optimised for non‑ferrous materials such as aluminium and brass, where a sharp, uncoated cemented carbide edge delivers low cutting forces and a good surface finish. How does the chipbreaker affect surface quality? The single‑sided chipbreaker on the insert promotes controlled chip formation and evacuation, helping to reduce rework and produce cleaner part surfaces during turning operations. Which holders are compatible with this ISO insert? Compatibility depends on the holder pocket form, tolerance class, fastening method, size and thickness; the insert follows ISO standards to simplify matching with compliant external toolholders. Is the insert coated or uncoated and what does that mean? This insert is uncoated cemented carbide, which provides a very sharp edge and lower cutting forces—beneficial for softer materials and applications prioritising surface quality. What clamping features ensure repeatable positioning? The insert uses a cylindrical hole with a one‑sided countersink (40°–60°) for secure mechanical clamping and repeatable indexing in appropriately designed toolholders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 060200 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑standard geometry, a sharp TH10 uncoated carbide grade and precise mounting details for reliable turning results; order the insert via Metav Werkzeuge or request application advice from the sales engineers. CCGT 060200 TH10 turning insert – Tungaloy CCGT 060200 TH10 is an ISO‑standard indexable insert engineered for external and internal turning in applications where an uncoated cutting edge reduces cutting forces and delivers clean surfaces ISO‑standard CCGT 060200 geometry Uncoated carbide grade TH10 for non‑ferrous Rhombic 80° form with 7° clearance Cylindrical hole with 40°–60° countersink Accurate fit and predictable geometry for turning operations The ISO‑standard geometry ensures repeatable seating in compatible holders: form, clearance angle, tolerance class, fixation method, size and thickness define the fit. The CCGT 060200 TH10 design makes holder selection straightforward and reduces setup variability, which supports consistent part geometry and minimises scrap rates. Compatibility with common external holders and boring bars is achieved when the rhombic seat and 7° clearance are matched to the tool‑holder pocket. Material selection that lowers cutting effort and improves surface quality An uncoated carbide grade like TH10 is selected for its ability to cut non‑ferrous materials with low cutting forces and to produce a clean surface without the need for a coating layer. Reduced adhesion on the cutting edge lowers built‑up edge tendency and helps to maintain surface finish on aluminium alloys and similar materials. The lack of coating also simplifies edge preparation and regrinding choices in demanding production scenarios. Geometry and mounting details that affect performance Key geometry values influence chip flow and stability: the rhombic form with an 80° included angle, 2.38 mm plate thickness and 7° clearance combine to give a stable cutting edge for a range of turning tasks. The single‑sided chipbreaker directs chips away from the workpiece during light to medium cutting, while the cylindrical hole with one‑sided countersink (40°–60°) secures the insert reliably in indexable holders designed for this hole style. Observing these parameters during holder selection enables predictable tool life and repeatable finishing. Practical benefits in production and recommended use Specifying this indexable insert yields efficient tool management: the standardised shape and hole style simplify stock keeping and spare part replacement, while the TH10 grade offers a versatile option for workshops machining aluminium and non‑ferrous alloys. For optimal results, match the single‑sided chipbreaker and the insert thickness to the chosen feed and depth‑of‑cut; this combination reduces vibration and supports consistent surface quality. For additional application data or material‑specific recommendations, technical advisors are available. Contact Metav Werkzeuge for application advice, precise holder compatibility checks and to order the CCGT 060200 TH10 Tungaloy indexable insert by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6801259 Manufacturer SKU: TUN6801259 SKU: 6801259-Tungaloy Model series: ISO turning indexable inserts Name: CCGT 060200 TH10 Facts Size: 06 Thickness: 2.38 mm Clearance angle: 7° Included angle: 80° Countersink angle: 40°–60° Special features Material: cemented carbide Grade: TH10 (uncoated) Shape: rhombic Chipbreaker: single‑sided Hole style: cylindrical hole with one‑sided countersink Application: turning (external and internal) ISO‑standard geometry FAQ What materials is this insert intended for? The TH10 grade is formulated for non‑ferrous materials; the CCGT 060200 TH10 insert performs well on aluminium alloys and similar metals where a clean surface is required. How does the uncoated carbide edge affect machining? An uncoated carbide edge on this insert reduces cutting forces and adhesion, supporting improved surface finish and simpler edge reconditioning compared with coated alternatives. Which holders are compatible with this insert? Compatibility depends on the holder’s pocket form, clearance, tolerance and fixation method; the insert’s ISO geometry and hole style suit holders designed for CCGT 060200‑type inserts. What is the significance of the 7° clearance and 80° included angle? The 7° clearance reduces flank contact and friction, while the 80° included angle provides a strong cutting edge suitable for stable finishing and general turning applications. Does the hole and countersink affect clamping reliability? Yes. The cylindrical hole with one‑sided countersink (40°–60°) improves axial seating and repeatable clamping in compatible toolholders, contributing to consistent machining results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060200 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of precise ISO conformity, a sharp uncoated carbide grade and a one-sided chipbreaker for controlled cutting forces and clean surface finishes; order directly via Metav Werkzeuge or consult our specialists for application advice. CCGT060200 TH10 indexable turning insert for turning, Tungaloy The CCGT060200 TH10 is an ISO rhombic indexable turning insert designed for external and internal turning, featuring a one-sided chipbreaker and a 7° clearance angle for stable cutting. ISO rhombic 06 form Uncoated carbide TH10 grade 7° clearance angle One-sided chipbreaker design Predictable cutting performance for non-ferrous turning The CCGT060200 TH10 insert combines an uncoated carbide substrate with a sharp universal grade to deliver low cutting forces and consistently clean surfaces when machining non-ferrous materials. The uncoated cutting edge reduces friction in light- to medium-duty turning operations, which helps to preserve tool sharpness and to lower power consumption. For shops seeking repeatable part quality, the one-sided chipbreaker ensures reliable chip formation and evacuation, reducing the risk of workpiece damage and rework. Clear compatibility rules to simplify holder selection Compatibility with toolholders depends on geometry factors such as form, clearance angle, tolerance class, clamping method, size and thickness. The rhombic 06 size and the 2.38 mm thickness match a wide range of ISO turning toolholders; the cylindrical hole with a single-sided countersink (40°–60°) accommodates standard clamping screws. This transparency makes it straightforward to verify fitment: check the holder’s pocket for ISO rhombic inserts of size 06 and a 7° clearance to ensure correct seating and clamping force, which directly supports process stability. Application focus and machining benefits Designed primarily for turning, the insert is particularly suited to non-ferrous metals where a clean surface is required and where low cutting forces are advantageous. The sharp universal TH10 grade favours operations such as finishing and light-medium roughing on materials like aluminium and brass, producing superior surface quality with minimal burr formation. By choosing an insert matched to the workpiece and the operation, cycle times can be optimised while maintaining repeatable dimensional accuracy. Practical selection and handling advice When selecting an insert grade and chipbreaker, pair the TH10 uncoated option with appropriate feeds and moderate cutting speeds to benefit from its low cutting resistance. Ensure correct torque on the clamping screw and verify the seating against the underlay or clamp set to prevent tilting and edge chipping. Regular inspection of the edge and adherence to recommended speeds will extend tool life and maintain process reliability, supporting a more productive machining cycle. Contact Metav Werkzeuge for tailored recommendations on Tungaloy turning inserts or to request supply and compatibility checks using the SKU 6801256-Tungaloy via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 6801256 SKU: 6801256-Tungaloy Manufacturer SKU: TUN6801256 Model series: ISO turning indexable inserts Measurements Insert designation: 060200 Size: 06 Thickness: 2.38 mm Clearance angle: 7° Included angle: 80° Features and compatibility Material: carbide Grade/coating: TH10, uncoated Insert shape: rhombic Chipbreaker: one-sided Hole: with hole; cylindrical hole + single-sided countersink (40°–60°) Typical application: external and internal turning FAQ What materials is this insert best suited for? The CCGT060200 TH10 insert from Tungaloy is optimised for non-ferrous materials such as aluminium and brass, where the uncoated TH10 grade provides low cutting forces and clean surface finishes. How is the insert clamped and what hole style does it require? The insert uses a cylindrical hole with a single-sided countersink (40°–60°) for standard clamping screws; verify the holder pocket matches the ISO rhombic 06 geometry when fitting the CCGT060200 TH10. Can this insert be used for both external and internal turning? Yes, the ISO rhombic geometry and the one-sided chipbreaker make the insert suitable for both external and internal turning operations, provided the holder accommodates size 06 rhombic inserts. Which clearance and included angles are relevant for holders? The insert has a 7° clearance angle and an 80° included angle; holders must match these specifications to ensure correct seating and cutting performance for the Tungaloy insert. What is the recommended inspection routine to prolong tool life? Inspect the cutting edge for chipping and check clamping torque regularly; maintaining correct seating on the underlay or clamp set and using appropriate feeds and speeds for the TH10 grade will sustain tool life and process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060201 -UM 1205 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Product features for CCGT 060201 inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCGT060201-UM1205-SANDVIK ISO-Code: CCGT060201 Grade: 1205 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.1 Chip Breaker: -UM Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCGT-060201-1205-Sandvik 40END
CCGT 060201 AH725 Wendeplatten - Tungaloy
Benefit from the combination of a universal PVD‑coated AH725 grade, precise 80° rhombic geometry and a fine 0.1 mm corner radius to secure stable, reproducible turning results; order directly via Metav Werkzeuge or ask the consultants for compatibility guidance. CCGT 060201 AH725 Tungaloy indexable insert for turning — 80° rhombic, 0.1 mm radius A CCGT 060201 AH725 indexable insert designed for ISO‑standard external and internal turning, offering a universal, breakout‑resistant grade for mixed steel work. Universal PVD‑coated AH725 grade 80° rhombic geometry for stable cutting 0.1 mm corner radius for fine finishing With locating hole and countersink for secure clamping Stable productivity on mixed‑material turning The CCGT060201 AH725 Tungaloy indexable insert combines a PVD‑coated carbide substrate with a universal cutting grade engineered for steel and stainless steels, delivering consistent performance across varying materials. The coating reduces built‑up edge and improves wear resistance, which translates into longer sequences between index changes and fewer process interruptions. For operations where tool change time and process reliability matter, this combination supports a steady production flow and predictable results. Geometry that supports secure cutting and surface quality The 80° rhombic geometry and 0.1 mm corner radius create a robust cutting edge that resists chipping while enabling close‑tolerance finishing. The rhombic form provides an effective rake and shear condition for both light finishing passes and more aggressive cuts, helping to maintain dimensional accuracy. Where component appearance is important, the geometry contributes to improved surface finish without complex setup changes. Grade and coating for higher process security The AH725 grade is a universal, breakout‑resistant option optimised for applications with changing workpiece materials and demanding stability requirements. The PVD layer enhances wear protection and thermal resistance; explained simply, this means fewer unexpected failures and a lower risk of edge breakdown during interrupted cuts. Selecting this grade reduces the need for excessive conservatism in cutting parameters, so productivity is improved without compromising tool life. Compatibility, clamping and practical handling Designed to the ISO series, the insert accepts standard holders when form, clearance angle, tolerance class, fixation type, size and thickness match. The plate is 06 size with a thickness of 2.38 mm, with locating hole and a cylindrical hole plus single‑side countersink (40°–60°), enabling firm screw clamping and stable seating. These features simplify insertion and indexing in compatible toolholders and support repeatable positioning for series production. For reliable, productive turning choose the Tungaloy AH725 indexable insert and contact Metav Werkzeuge for availability and selection advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6857010 Manufacturer SKU: TUN6857010 SKU: 6857010-Tungaloy Article name: CCGT060201 AH725 Tungaloy indexable insert Series: ISO turning indexable inserts Dimensions / measurable data Plate size: 06 Plate thickness: 2.38 mm Cutting angle: 80° Clearance angle: 7° Corner radius: 0.1 mm Materials & features Material: carbide Grade/coating: AH725, PVD‑coated carbide Shape: rhombic Chipbreaker: single‑sided Hole: with locating hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Application: turning Model series: ISO turning indexable inserts FAQ What turning tasks is this insert best suited for? The CCGT060201 AH725 insert is intended for external and internal turning operations on steels and stainless steels, where a universal, breakout‑resistant grade improves process security. How does the AH725 grade affect tool life and stability? The AH725 PVD‑coated grade offers improved wear resistance and edge stability, which reduces chipping and extends usable life under varying material conditions for the CCGT060201 AH725 Tungaloy indexable insert. Which geometrical details should be checked before fitting the insert? Confirm the holder accepts an ISO 06 rhombic insert with 2.38 mm thickness, 80° cutting angle and 7° clearance; the 0.1 mm corner radius and locating hole also require compatible clamping features. How is the insert secured in a holder? This insert uses a locating hole with a cylindrical bore and a single‑side countersink (40°–60°) for screw clamping, ensuring firm seating and repeatable positioning. Can the insert handle interrupted cuts or varying workpiece batches? Yes, the combination of AH725 grade and robust rhombic geometry is designed to withstand interruptions and material changes, improving reliability in mixed‑batch production. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 060201 H13A Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics indexable inserts CCGT 060201 from Sandvik Brand: Sandvik Manufacturer Order Number: CCGT060201UMH13A-SANDVIK Dataand Figures: ISO-Code: CCGT060201 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.1 Features Material: cemented carbide Grade: H13A with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCGT-060201-H13A-Sandvik 40END
CCGT 060201 IC20 Indexable Insert - ISCAR
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Product characteristics for indexable inserts CCGT 060201 from ISCAR Brand: ISCAR Manufacturer Order Number: CCGT060201-ASIC20 Facts for the tool: ISO-Code: CCGT060201 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.1 Features Material: cemented carbide Grade: IC20 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING ALUMINUM Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CCGT-060201-IC20-ISCAR 40END
CCGT 060201 IC907 Indexable Insert - ISCAR
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features CCGT 060201 insert from ISCAR Brand: ISCAR Manufacturer Order Number: CCGT060201-SMIC907 Facts and Figures: ISO-Code: CCGT060201 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.1 Special features Material: cemented carbide Grade: IC907 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: SWISSTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CCGT-060201-IC907-ISCAR 40END
CCGT 060201 Indexable Insert for Aluminium - MetavCUT
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details for indexable inserts CCGT 060201 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT060201L-F-Aluminium ISO-Code: CCGT060201 Usage for: Aluminium Material: cemented carbide Form: rhombic Usable to the work on: Aluminium Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.1 Chip Breaker: single-sided Angle: 80° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-060201-Aluminium-MetavCUT 40END
CCGT 060201 Indexable Insert for Aluminium - MetavCUT
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Product specifications indexable inserts CCGT 060201 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT060201L-U-Aluminium Dataand Figures: ISO-Code: CCGT060201 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.1 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-060201-Aluminium-MetavCUT 40END
CCGT 060201 Indexable Insert for Aluminium - MetavCUT
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details for indexable inserts CCGT 060201 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT060201R-F-Aluminium ISO-Code: CCGT060201 Usage for: Aluminium Material: cemented carbide Form: rhombic Usable to the work on: Aluminium Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.1 Chip Breaker: single-sided Angle: 80° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-060201-Aluminium-MetavCUT 40END
CCGT 060201 Indexable Insert for Aluminium - MetavCUT
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a photo of your insert by e-mail.► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Detail specifications CCGT 060201 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT060201R-U-Aluminium ISO-Code: CCGT060201 Usage for: Aluminium Material: cemented carbide Form: rhombic Usable to the work on: Aluminium Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.1 Chip Breaker: single-sided Angle: 80° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-060201-Aluminium-MetavCUT 40END
CCGT 060201 Indexable Insert for Aluminium - MetavCUT
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data for indexable inserts CCGT 060201 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT060201SKC-Aluminium ISO-Code: CCGT060201 Usage for: Aluminium Material: cemented carbide Form: rhombic Usable to the work on: Aluminium Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.1 Chip Breaker: single-sided Angle: 80° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-060201-Aluminium-MetavCUT 40END
CCGT 060201 Indexable Insert for Aluminium - MetavCUT
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Product details indexable inserts CCGT 060201 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT060201SM-Aluminium Facts & Figures: ISO-Code: CCGT060201 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.1 Features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-060201-Aluminium-MetavCUT 40END
CCGT 060201 Indexable Insert for Aluminium - MetavCUT
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Information on technical features for indexable inserts CCGT 060201 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT060201SN-Aluminium ISO-Code: CCGT060201 Usage for: Aluminium Material: cemented carbide Form: rhombic Usable to the work on: Aluminium Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.1 Chip Breaker: single-sided Angle: 80° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-060201-Aluminium-MetavCUT 40END
CCGT 060201 Indexable Insert for Aluminium - MetavCUT
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications for CCGT 060201 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT060201ST-Aluminium ISO-Code: CCGT060201 Usage for: Aluminium Material: cemented carbide Form: rhombic Usable to the work on: Aluminium Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.1 Chip Breaker: single-sided Angle: 80° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-060201-Aluminium-MetavCUT 40END
CCGT 060201 Indexable Insert for Brass - MetavCUT
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Features indexable inserts CCGT 060201 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT060201L-F-Brass Facts for the tool: ISO-Code: CCGT060201 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.1 Special features Material: cemented carbide Usage for: Brass with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-060201-Brass-MetavCUT 40END
CCGT 060201 Indexable Insert for Brass - MetavCUT
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features indexable inserts CCGT 060201 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT060201L-U-Brass Figures for the tool: ISO-Code: CCGT060201 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.1 Special features Material: cemented carbide Usage for: Brass with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-060201-Brass-MetavCUT 40END
CCGT 060201 Indexable Insert for Brass - MetavCUT
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications CCGT 060201 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT060201R-F-Brass Facts & Figures: ISO-Code: CCGT060201 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.1 Features Material: cemented carbide Usage for: Brass with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-060201-Brass-MetavCUT 40END
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com