Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCGT 04T100 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide SH725, ISO-standard compatibility and a compact 1.59 mm thickness for dependable turning results; order the insert directly via Metav Werkzeuge or ask our consultants for application support. CCGT 04T100 SH725 Tungaloy turning insert — ISO rhombic geometry, coated carbide The CCGT04T100 SH725 is an ISO‑standard indexable turning insert designed for external and internal turning; its rhombic 80° geometry and single‑sided chipbreaker suit variable engagement and small‑tool applications. ISO-standardised geometry for holder fit Coated carbide grade SH725 for edge stability 7° clearance and rhombic 80° profile Single-sided chipbreaker for controlled chips Consistent cutting performance with coated carbide technology The insert is produced from coated cemented carbide grade SH725, a formulation optimised for a stable cutting edge under changing engagement conditions. This composition provides a balance between toughness and wear resistance, reducing the risk of premature chipping when machining interrupted cuts or using smaller toolholders. As a result, the component supports steady cycle times and predictable tool life—advantages that translate directly into improved process efficiency and fewer unscheduled tool changes on the shop floor. ISO compatibility and mechanical fit reduce setup risk Designed to the ISO series for indexable turning inserts, the geometry and dimensions ensure fast integration into existing tool systems. Critical parameters such as form, 7° clearance, tolerance class, fastening type, insert size 04 and a plate thickness of 1.59 mm determine holder compatibility; the rhombic 80° profile and the specified hole style (cylindrical hole with single‑side countersink 40°–60°) facilitate secure clamping in standard external holders or boring bars. These standardised features simplify tool inventory planning and reduce downtime when replacing worn inserts. Practical system approach and application guidance for reliable results The insert is intended for turning (external and internal) and is supplied as part of a system that comprises the ISO insert, a matching external holder or boring bar, and the required shim/clamping set and screws. The single‑sided chipbreaker supports controlled chip formation, which helps maintain surface finish and machine cleanliness. For operations that alternate between light finishing passes and heavier engagements, the SH725 grade is particularly suitable because it combines edge stability with good toughness. For tailored recommendations on clamping torque, radial engagement or optimal feed ranges, Metav Werkzeuge’s technical team can provide application‑specific advice to ensure best‑in‑class performance. Contact Metav Werkzeuge for original Tungaloy inserts, application recommendations and to request availability for the CCGT 04T100 SH725 insert — Metav Werkzeuge provides expert technical guidance and prompt supply coordination. Technical data Article number: 6737263 SKU: 6737263-Tungaloy Manufacturer SKU: TUN6737263 Model series: ISO-Drehwendeschneidplatten Name: CCGT04T100 SH725 Tungaloy insert Facts Geometry angle: 80° Clearance angle: 7° Plate thickness: 1.59 mm Insert size: 04 Countersink angle: 40°–60° Special features Coated cemented carbide (SH725) Single-sided chipbreaker Rhombic plate form With hole — cylindrical hole + single-sided countersink (40°–60°) System components: ISO insert + holder/boring bar + shim/clamping set + spare screws Application: Turning (external and internal) Suitable for smaller tools and variable engagement conditions FAQ What materials is this insert intended to machine? The CCGT 04T100 SH725 insert is a coated cemented‑carbide grade developed for a broad range of turning applications; selection of the appropriate chipbreaker and grade makes it suitable for many steels and mixed operations. How does the SH725 grade affect tool life? SH725 offers a balance of toughness and wear resistance; using the SH725 coated carbide insert typically improves edge stability under variable engagement, helping to extend effective tool life. Which holders are compatible with this insert? Compatibility depends on ISO geometry, clearance angle, tolerance class, fastening method, size and thickness; the rhombic 80° form and the specified hole and countersink allow use in standard ISO external holders and boring bars matched to size 04 inserts. Is the insert reversible and how many cutting edges are available? This is a single‑sided insert with a single active cutting edge per index position; indexing frequency and available edges depend on the specific insert orientation and holder design. What system items are recommended when fitting the insert? A complete set typically includes the ISO insert, a compatible external holder or boring bar, a suitable shim or clamping set and replacement screws for secure mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 04T100 SH730 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide SH730 durability, rhombic 80° geometry and reliable clamping features for consistent turning results; order the insert directly via Metav Werkzeuge or request application advice from our consultants. CCGT 04T100 SH730 Turning insert by Tungaloy — 80° rhombic geometry, 7° clearance The CCGT 04T100 SH730 is an ISO‑standard turning insert designed for external and internal turning with a one‑sided chipbreaker and cylindrical mounting hole Coated carbide grade SH730 Rhombic 80° geometry 7° clearance angle Cylindrical hole with countersink 40°–60° One-sided chipbreaker Longer tool life through a tough coated grade The combination of a coated carbide substrate and the SH730 grade provides a balance of toughness and edge stability that is particularly effective in variable engagement conditions and with smaller toolholders. This indexable insert is engineered to maintain a reliable cutting edge under intermittent cuts and changing depths of cut, which reduces unexpected tool changes and supports a steadier production flow. The coating improves resistance to abrasive wear while the substrate toughness helps to avoid chipping, resulting in measurable gains in tool life and process reliability. Precise geometry for consistent clamping and compatibility Designed to the ISO turning insert family, the insert’s rhombic 80° geometry and 7° clearance angle ensure predictable cutting forces and repeatable seating in standard holders. The 1.59 mm thickness and insert size 04 match common pocket dimensions; the piece is supplied with a cylindrical hole plus a single‑side countersink (40°–60°) to suit many screw clamping systems. Explaining the fit conditions — form, clearance, tolerance class, fastening, size and thickness — simplifies the selection process for machining centres and turret setups and minimises setup time when changing inserts or holders. Practical chip control and recommended turning uses A one‑sided chipbreaker promotes controllable chip formation for both external and internal turning operations, aiding chip evacuation and surface finish. The insert is best used where a tough, cut‑edge stable grade is required and where process stability varies; selecting the matching chipbreaker and the SH730 grade according to workpiece material and rigidity will deliver the intended productivity. For operations requiring stable edges in shorter tools or with fluctuating engagement, this solution offers predictable behaviour and easier process tuning while preserving component quality. Contact Metav Werkzeuge for tailored application advice and to secure availability of the Tungaloy CCGT 04T100 SH730 turning insert via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6862193 Manufacturer SKU: TUN6862193 SKU: 6862193-Tungaloy Model series: ISO turning indexable inserts Manufacturer: Tungaloy Facts Insert size: 04 Lead angle: 80° Clearance angle: 7° Thickness: 1.59 mm Countersink angle: 40°–60° Special features Material: cemented carbide Coating / grade: SH730 One-sided chipbreaker Rhombic insert form With hole: cylindrical hole + single-side countersink (40°–60°) Application: external and internal turning ISO compatibility with standard holders FAQ What materials is this insert suited for? The Tungaloy CCGT 04T100 SH730 insert is a coated cemented carbide grade designed for a broad range of turning tasks; the SH730 grade is chosen for its toughness and edge stability, making it suitable for many steels and mixed conditions. How does the insert fix to the holder? The insert has a cylindrical mounting hole with a single‑side countersink (40°–60°) and is intended for screw clamping in compatible ISO holders; correct seating relies on matching form, size and tolerance class. Can the insert be used for internal turning? Yes — the geometry and one‑sided chipbreaker support both external and internal turning applications when mounted in appropriate boring bars or holders. What are the key dimensions to check for holder compatibility? Verify insert size (04), thickness (1.59 mm), lead angle (80°) and clearance angle (7°) against the holder pocket and clamping system to ensure reliable fit and repeatability. Which benefit does the SH730 grade bring to production? SH730 combines a wear‑resistant coating with a tough substrate to reduce chipping and extend edge life, which improves uptime and provides steadier surface quality under variable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 04T100 SH730 Wendeplatten - Tungaloy
Take advantage of the combination of SH730 coated carbide for edge stability, ISO compatibility for simple holder interchangeability, and a compact 1.59 mm thickness for space-saving tool assemblies — all aimed at steady production and consistent component quality. Order directly via Metav Werkzeuge or consult the technical team for application-specific setup. CCGT 04T100 SH730 indexable turning insert for Turning — Tungaloy The CCGT04T100 SH730 is an ISO-format, rhombic indexable insert designed for external and internal turning, offering a tough, edge-stable grade for variable engagement conditions. ISO 04T100 rhombic insert, 80° cutting angle SH730 coated carbide for edge stability 7° clearance angle for consistent chip control Cylindrical hole with single-side countersink 40°–60° Stable cutting performance for varied turning tasks The SH730 grade is a coated carbide formulation selected for edge stability and toughness, which supports reliable machining under changing engagement or interrupted cuts. In practical terms, the grade reduces flank wear and maintains cutting geometry for longer cycles, resulting in fewer tool changes and steadier part tolerances. As an ISO-format insert, it integrates into established tool systems so production planners can rely on predictable behaviour across serial turning operations. Secure mounting and compact geometry for fast setup The rhombic 80° geometry combined with a 1.59 mm plate thickness delivers a compact profile that suits tight overhangs and smaller holders without compromising strength. The insert is supplied with a cylindrical hole and a single-side countersink (40°–60°) to ensure centralised fastening and positive seating in compatible clamping systems. Compatibility with a holder is determined by form, clearance angle (7°), tolerance class, fastening type, size and thickness — matching these parameters ensures repeatable clamping and minimises set-up time on the shop floor. Controlled chip formation and extended tool life A one-sided chipbreaker provides consistent chip control in common turning operations, helping to prevent chip entanglement and improving surface finish. The combination of the chipbreaker design and the SH730 coating promotes stable chip formation, which reduces heat concentration at the cutting edge and contributes to extended tool life. For best results, select the chipbreaker and grade in line with the workpiece material and the expected engagement conditions to balance productivity and component quality. For application advice or to place an order for the Tungaloy CCGT 04T100 SH730 indexable insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for immediate consultation and availability. Technical data Article number: 6862118 SKU: 6862118-Tungaloy Manufacturer SKU: TUN6862118 Model series: ISO indexable turning inserts Name: CCGT04T100 SH730 Tungaloy indexable insert Facts Insert size: 04 Insert shape: rhombic Plate thickness: 1.59 mm Clearance angle: 7° Included hole: with cylindrical hole + single-side countersink (40°–60°) Cutting angle: 80° Special features Grade: SH730 (coated carbide) One-sided chipbreaker ISO-format CCGT designation For external and internal turning Compatibility determined by holder form, clearance, tolerance, fastening, size and thickness FAQ What machining tasks suit this insert best? The CCGT04T100 SH730 indexable insert (SKU 6862118-Tungaloy) is intended for external and internal turning; it performs well in general-purpose operations and where engagement conditions vary. How is the insert mounted in a holder? The insert is designed with a cylindrical hole and a single-side countersink (40°–60°); correct seating requires a compatible holder matching form, clearance, tolerance, fastening method, size and thickness. Is this grade suitable for interrupted cuts or variable engagement? Yes, the SH730 grade is described as tough and edge-stable, making it suitable for interrupted cuts and changing engagement conditions often encountered in turning. What are the key dimensions to check when specifying a holder? Important dimensions are insert size 04, plate thickness 1.59 mm, rhombic geometry with 80° cutting angle and a 7° clearance angle; these values determine holder compatibility. Can this insert be used in compact tool assemblies and smaller holders? The compact 1.59 mm thickness and rhombic profile make the insert suitable for space-limited tool setups and smaller toolholders, while maintaining adequate cutting edge support. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 04T100 TH10 Wendeplatten - Tungaloy
Take advantage of the sharp TH10 uncoated carbide grade and the ISO CCGT rhombic geometry to achieve low cutting forces and consistent surface quality in turning operations; order directly via Metav Werkzeuge or consult our technical team for application matching. CCGT 04T100 TH10 indexable insert for turning — Tungaloy CCGT 04T100 TH10 is an ISO-standard rhombic turning insert designed for external and internal turning where a sharp, uncoated cutting edge reduces cutting forces and improves finish. Sharp universal grade TH10 for non-ferrous metals Uncoated carbide for low cutting forces ISO CCGT rhombic 80° geometry Cylindrical hole with 40°–60° countersink Higher productivity through lower cutting forces The CCGT 04T100 TH10 insert is built from uncoated carbide in the TH10 grade to deliver a sharp, low-friction cutting edge that reduces required cutting power and heat input. This characteristic translates directly into longer tool life under the right conditions and improved cycle times when machining aluminium and other non-ferrous materials. By favouring a sharp geometry over coating layers, the design supports stable chip formation and a clean surface finish, which lowers downstream finishing effort and increases throughput. Reliable seating and holder compatibility for less downtime Using an ISO CCGT format ensures repeatable mechanical compatibility with a wide range of external holders and boring bars; the fit is governed by plate form, relief angle, tolerance class, fastening method, size and thickness. The rhombic 80° geometry and 7° relief promote secure clamping and predictable cutting engagement, reducing the need for frequent repositioning. This stability shortens set-up time and minimises interruptions, offering a pragmatic route to process reliability in batch and jobbing environments. Adaptable choice for common turning tasks The single-sided chipbreaker and the sharp uncoated edge make the insert particularly suitable for turning operations where low cutting forces are required and chip control is moderate but consistent. Selection of the chipbreaker and the TH10 grade should be matched to the workpiece material and machine stability to reap the efficiency benefits. The rhombic plate form allows flexible approach angles for both external and internal turning, enabling one insert to cover several common tasks and reducing inventory complexity. Practical handling and installation benefits The plate presents a cylindrical hole with a single-sided countersink (40°–60°) for reliable fastening and simple indexing; the 1.59 mm thickness offers a slim profile while retaining sufficient strength for typical non-ferrous turning. The ISO designation supports straightforward replacement and stock control, while the uncoated carbide composition simplifies regrinding and inspection where applicable. Together, these aspects reduce handling time and maintain a focused, productive toolset for turning operations. For fast supply and tailored technical advice on Tungaloy turning inserts, contact Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com for a recommendation matched to the application and machine setup Technical data Manufacturer article number: 6862163 Internal SKU: 6862163-Tungaloy Manufacturer SKU: TUN6862163 Model series: ISO indexable turning plates Facts Plate size: 04 Thickness: 1.59 mm Relief angle: 7° Included angle: 80° Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features Uncoated carbide, grade TH10 Sharp universal grade for non-ferrous materials Single-sided chipbreaker Rhombic plate, ISO CCGT format Application: external and internal turning FAQ Which materials are best machined with this insert? The CCGT 04T100 TH10 insert and its uncoated TH10 grade are optimised for non-ferrous materials and applications where low cutting forces and clean finishes are priorities. How does the ISO designation affect holder compatibility? ISO CCGT format ensures mechanical compatibility; the insert fits holders when form, relief angle, tolerance class, fastening, size and thickness are matched. What chip control can be expected from the single-sided chipbreaker? The single-sided chipbreaker supports consistent chip formation in many turning scenarios; pairing the chipbreaker with the correct process parameters enhances evacuation and surface quality. Can this insert be used for internal turning? Yes, the rhombic shape and 80° included angle make the insert suitable for both external and internal turning tasks when the holder provides adequate support. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 04T100 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of precise ISO compatibility, a sharp uncoated carbide grade and robust clamping geometry for efficient, low-force turning operations; order directly via Metav Werkzeuge or consult the team for application support. CCGT 04T100 TH10 rhombic indexable insert for Turning by Tungaloy, 80° geometry The CCGT 04T100 TH10 is an ISO-standard rhombic indexable insert designed for external and internal turning, optimised for non‑ferrous materials where low cutting forces and clean surface finishes are required. Rhombic insert 80° cutting geometry Uncoated carbide grade TH10 for low cutting forces Cylindrical hole with one-sided countersink 1.59 mm thickness for secure clamping Consistent geometry for reliable turning results The rhombic shape with an included angle of 80° provides a versatile cutting edge geometry that balances strength and accessibility for both external and internal turning. The ISO-standard form ensures straightforward compatibility with established holders when the form, clearance angle, tolerance class, fastening and thickness match. With a plate thickness of 1.59 mm, the insert delivers stable clamping and predictable performance during light to medium turning operations, reducing vibration and improving dimensional consistency across workpieces. Sharp uncoated grade for low-force machining of non‑ferrous materials Manufactured from uncoated carbide, the TH10 grade is a sharp universal composition tailored for non‑ferrous and similar materials; this enables low cutting forces and clean surface results without the need for additional coatings. The single‑sided chipbreaker helps control chip flow for specific turning tasks, promoting smooth evacuation and avoiding re-cutting of chips. For operations prioritising surface finish and minimal cutting load, this combination of material and chip control supports higher process stability and lower spindle loads. System integration and application guidance for optimal productivity This insert is supplied as part of an ISO turning insert system and requires a matched outer holder or boring bar, plus the correct shim and clamp set, with replacement screws available for maintenance. The pack configuration includes an insert with a cylindrical hole and one‑sided countersink (40°–60°) to ensure reliable fastening and repeatable indexability. Selecting the appropriate chipbreaker and grade according to workpiece material, machining type and machine stability will extend tool life and improve throughput. If further machining parameters are needed for production planning, technical advice and specific cutting data can be provided. For efficient turning with Tungaloy’s TH10 grade, contact Metav Werkzeuge for tailored application advice and prompt supply (info@metav-werkzeuge.com | +49 2822 7131930) Technical data Article number: 6862152 Manufacturer SKU: TUN6862152 SKU: 6862152-Tungaloy Designation: CCGT04T100 Model series: ISO turning indexable inserts Manufacturer: Tungaloy Core data Thickness: 1.59 mm Insert size: 04 Included angle: 80° Clearance angle: 7° Countersink angle: 40°–60° Special features Material: carbide Grade/coating: TH10, uncoated carbide Chipbreaker: single-sided Hole: cylindrical with one-sided countersink Shape: rhombic Intended use: turning Compatibility: ISO-standard; compatibility depends on form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The CCGT 04T100 TH10 indexable turning insert (Tungaloy, SKU 6862152-Tungaloy) is designed primarily for non‑ferrous materials and applications where an uncoated, sharp carbide edge promotes low cutting forces and clean finishes. How does the chipbreaker influence performance? The single‑sided chipbreaker on the CCGT 04T100 TH10 helps control chip formation for specific turning tasks, improving chip evacuation and surface quality while reducing the likelihood of chip re‑cutting. Which holder characteristics must be matched for reliable use? Compatibility requires matching holder form, clearance angle (7°), tolerance class, fastening method, insert size and thickness; following these parameters ensures secure clamping and repeatable indexing with the CCGT04T100 insert. Is the insert suitable for internal as well as external turning? Yes, the rhombic geometry and 80° included angle make the CCGT 04T100 TH10 suitable for both external and internal turning when the correct holder and machining parameters are used. What are the fastening features of this insert? The insert includes a cylindrical hole with a one‑sided countersink (40°–60°) to enable reliable fastening in compatible ISO holders and to support repeatable mounting during index changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 04T101 IC908 Indexable Insert - ISCAR
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details CCGT 04T101 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCGT04T101-F1PIC908 Facts for the tool: ISO-Code: CCGT04T101 Clearance Angle: 7° Angle: 80° Radius: 0.1 Features Material: cemented carbide Grade: IC908 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: SMALL TURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-CCGT-04T101-IC908-ISCAR 40END
CCGT 04T101 SH7025 Wendeplatten - Tungaloy
Combining the coated carbide SH7025 grade with a rhombic 80° geometry and a 0.1 mm corner radius yields reliable edge stability and effective chip control for demanding turning tasks; order the insert directly via Metav Werkzeuge or ask the consultants for holder matching and application advice. CCGT04T101 SH7025 — CCGT turning insert (ISO 04T101), rhombic, Tungaloy The CCGT04T101 SH7025 is an ISO-standard rhombic turning insert developed for stable edge integrity and dependable chip formation in external and internal turning operations. Coated carbide grade SH7025 Rhombic plate, 80° included angle 0.1 mm corner radius for fine finishing Cylindrical hole with single‑side countersink Stable edges for consistent machining results The combination of coated carbide substrate and the SH7025 grade provides a balance between toughness and wear resistance, which is particularly valuable where cutting conditions vary. The rhombic geometry with an 80° included angle and a 0.1 mm corner radius supports repeatable surface quality and reliable edge life during interrupted cuts or small engagement depths. The integrated single‑sided chipbreaker promotes predictable chip formation, reducing the risk of edge chipping and improving cycle-time consistency across serial production. This results in measurable gains in process stability and fewer insert changes per shift. Clear compatibility and secure mounting with ISO holders Compatibility is determined by the plate form, relief angle, tolerance class, fixing method, size and thickness; the insert is supplied in the ISO form CCGT with a 7° relief and a 1.59 mm plate thickness, and it features a cylindrical hole with a single‑side countersink (40°–60°) for positive clamping. These features simplify selection of the correct external holder or boring bar and reduce set‑up ambiguity. Where holder geometry and tightening torque are matched to the insert dimensions, clamping force distribution and repeatability are optimised, helping to maintain machining accuracy and tool life in demanding turning cycles. Efficient cutting performance for general turning Designed for both external and internal turning, the insert’s coated carbide construction and engineered chipbreaker make it suitable for a broad range of turning tasks, especially where smaller tools or varying engagement conditions are encountered. The single‑sided chipbreaker aids evacuation of swarf and reduces heat concentration at the cutting edge, which supports better surface finish and longer edge life. The ISO-standard format also allows straightforward replacement during production, reducing downtime and simplifying inventory management for workshops running mixed batches. Practical guidance for selection and use When choosing an insert for a specific turning task, prioritise matching the SH7025 grade to the material to be machined and the expected cutting conditions; the tougher character of this grade is particularly helpful when conditions fluctuate. Ensure the mating holder accepts the CCGT form and that the 1.59 mm thickness and cylindrical hole arrangement align with the clamping system. For assistance with holder selection, lathe set‑up or recommended cutting parameters for particular steels or alloys, consult the application specialists at Metav Werkzeuge — matching insert and holder correctly prevents tool damage and preserves machining quality. Request a tailored holder recommendation or application plan from Metav Werkzeuge for the Tungaloy CCGT04T101 SH7025 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatible holders and ideal cutting conditions Technical data Article number: 6967421 Manufacturer article number: 6967421 Manufacturer SKU: TUN6967421 SKU: 6967421-Tungaloy Model series: ISO turning inserts Name / designation: CCGT04T101 SH7025 Tungaloy insert Core specifications Included angle: 80° Relief angle: 7° Corner radius: 0.1 mm Plate thickness: 1.59 mm Plate size: 04 Design and features Coated carbide material Grade SH7025 Rhombic plate form Cylindrical hole with single‑side countersink (40°–60°) Single‑sided chipbreaker ISO‑standard turning insert Application: turning (external and internal) FAQ What materials is this insert best suited for? The Tungaloy CCGT04T101 SH7025 insert is formulated as a tough, edge‑stable grade suitable for general turning tasks where cutting conditions may vary; selection should be matched to the workpiece material and machining stability. How is the insert mounted in a holder? Mounting requires a compatible CCGT ISO holder that accepts a 1.59 mm thick rhombic insert with a cylindrical hole and single‑side countersink; correct seating and torque ensure repeatable clamping and performance for the CCGT04T101 SH7025. What finishing capability can be expected with a 0.1 mm corner radius? A 0.1 mm corner radius provides a balance between fine surface finish and edge strength, delivering consistent finishes on turned parts while retaining resistance to minor edge loading and interruptions. Is the chip control suitable for interrupted cuts? Yes, the single‑sided chipbreaker and the SH7025 grade provide controlled chip formation and edge stability that help manage interrupted cutting conditions, especially when used with the correct holder and cutting parameters. Which features improve process reliability in batch production? The ISO‑standard format, the coated carbide SH7025 grade and the rhombic geometry combine to offer reproducible seating, consistent edge life and predictable chip behaviour, all of which support high process reliability in batch turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 04T101 SH7025 Wendeplatten - Tungaloy
Take advantage of a coated carbide grade engineered for stable cutting performance and an ISO‑compliant rhombic geometry for straightforward integration into standard turning tool systems; the combination of wear‑resistant material and compact 0.1 mm nose radius supports precise finishing and reliable chip control. Order directly via Metav Werkzeuge or consult the team for application advice. CCGT04T101 SH7025 indexable turning insert for turning (Tungaloy) The CCGT04T101 SH7025 is an ISO‑standard rhombic indexable insert for external and internal turning, offering an 80° geometry, a 0.1 mm nose radius and a coated cemented carbide grade optimised for variable engagement conditions. ISO CCGT 04T101 geometry, 80° rhombic Coated carbide grade SH7025 for tough conditions 0.1 mm nose radius for fine finishing Compatible with standard indexable holders, with hole Precise, ISO‑based construction for reliable turning results The insert is manufactured to an ISO‑standard designation and is therefore compatible with matching ISO indexable holders when form, clearance, tolerance class, attachment and thickness are respected. The cutting material is coated carbide, grade SH7025, selected for its balance of edge stability and wear resistance; this combination reduces flank wear in interrupted cuts and during unstable engagement. Integration into a standard tool system is straightforward: a suitable clamp or screw, a support pad and the correct holder form ensure repeatable mounting and consistent geometry at the cutting line, which is essential for predictable process control. Geometry and hole design optimise finishing and versatility The rhombic plate offers an 80° geometry that suits a range of operations from general turning to light profiling, while the 0.1 mm nose radius supports fine surface finishes without compromising strength at the cutting edge. A 7° clearance avoids rubbing on the flank and helps maintain low cutting temperatures. The insert is supplied with a cylindrical hole and a one‑sided countersink (40°–60°) which eases secure clamping and positional indexation in compatible holders. The single‑sided chipbreaker provides controlled chip formation for a variety of steels and non‑ferrous materials when the correct chipbreaker and grade are chosen. Benefits in day‑to‑day production: edge stability and process security Designed for turning where entry conditions vary, the grade delivers a stable cutting edge even on smaller tool setups and during intermittent cuts. The coated carbide surface supports longer tool life and consistent surface quality, reducing the need for frequent index changes. Compatibility with standard holders means the insert can be quickly introduced into existing toolsets; ensuring the correct pad and fastening method will preserve the intended geometry and enable repeatable setups across batches, helping to keep cycle times steady and parts within tolerance. Practical advice for selection and set‑up Select the chipbreaker and grade that match the workpiece material and the required finish; for mixed or interrupted cuts the SH7025 grade is a pragmatic choice because of its edge stability. Verify holder compatibility by comparing the insert form, clearance angle, tolerance class, attachment type, nominal size and thickness (1.59 mm). Use the correct clamping screw and support pad to avoid distortion when tightening. Regular inspection of the cutting edge and correct indexing practice will extend tool life and preserve component quality without overcomplicating the process. Contact Metav Werkzeuge for availability and tailored application advice — specify holder type and workpiece material when enquiring via info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6967383 SKU: 6967383-Tungaloy Manufacturer SKU: TUN6967383 Model series: ISO-Drehwendeschneidplatten Designation (ISO): CCGT04T101 Facts Included angle: 80° Clearance angle: 7° Nose radius: 0.1 mm Plate thickness: 1.59 mm Plate size: 04 Hole: with hole Countersink angle: 40°–60° Special features Coated carbide cutting material Grade: SH7025 Rhombic plate form Single-sided chipbreaker Cylindrical hole with one-sided countersink For external and internal turning Compatible with ISO indexable holders FAQ What materials is this insert suited for? The CCGT04T101 SH7025 insert is designed as a general‑purpose turning grade; the SH7025 coating and cemented carbide substrate suit a wide range of steels and mixed cutting conditions, offering good edge stability for intermittent engagement. How is holder compatibility ensured? Compatibility depends on matching the insert form, clearance angle, tolerance class, attachment type, nominal size and thickness; use the ISO designation CCGT04T101 and verify the holder accepts a plate with a cylindrical hole and one‑sided countersink. Can the insert be used for internal turning? Yes, the geometry and small 0.1 mm nose radius make the insert suitable for both external and internal turning operations when fitted into the appropriate internal holder. What are the key mounting parts required? A matching indexable holder, support pad or clamping set, and the correct clamping screw ensure stable fixation; the insert’s cylindrical hole and countersink are designed for secure seating in standard clamps. How does the chipbreaker affect performance? The single‑sided chipbreaker promotes controlled chip formation and improved surface finish; choose a chipbreaker and feed value that correspond to the workpiece material and machining strategy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 04T101 SH725 Wendeplatten - Tungaloy
Combining a wear-resistant coated carbide grade SH725, an 80° rhombic geometry and a fine 0.1 mm corner radius, this insert provides stable cutting edges and reliable chip control for varied turning tasks. Order the CCGT 04T101 SH725 indexable turning insert directly via Metav Werkzeuge or consult their technical team for holder compatibility and application advice. CCGT 04T101 SH725 indexable turning insert for turning — Tungaloy A CCGT04T101 SH725 indexable insert engineered for external and internal turning, offering a one-sided chipbreaker and ISO-compliant geometry for straightforward clamping. Coated carbide grade SH725 Rhombic 04 size, 80° included angle 0.1 mm corner radius for precision Cylindrical hole with single-sided countersink Consistent cutting performance for versatile turning The combination of coated carbide construction and the SH725 grade delivers a balance of toughness and edge stability that suits variable engagement and smaller-tool setups. The coating enhances wear resistance while the substrate provides fracture toughness, which reduces the frequency of insert changes and maintains cutting performance under changing conditions. With a dedicated single-sided chipbreaker, chip formation is guided reliably, improving overall process stability and reducing machine downtime. The insert offers measurable improvements in tool life and surface finish when correctly matched to the workpiece and holder. ISO-compliant geometry for predictable mounting and repeatability Designed as part of an ISO turning indexable insert series, the rhombic shape with an 80° included angle ensures compatibility with a wide range of holders when form, relief angle, tolerance class, fastening and thickness are matched. The insert’s 1.59 mm thickness and 0.1 mm corner radius support precise depth control and repeatable positioning during reclamping. The cylindrical hole with a single-sided countersink (40°–60°) provides secure fixation and straightforward repeatability between tool changes, simplifying set-up procedures and reducing assembly time on the shop floor. Practical applications and setup guidance for reliable results Primarily intended for turning operations, this insert performs particularly well in tasks with variable chipload or when smaller tooling is required. Select a compatible holder, underlay and clamping screw that match the insert’s rhombic 04 dimensions to ensure correct seating and rigidity. The one-sided chipbreaker facilitates controlled chip evacuation in many materials, improving safety and surface quality; however, the chipbreaker style and the SH725 grade should be chosen with regard to workpiece material and machine stability. Proper matching of insert geometry and clamping increases process stability and contributes to higher productivity in batch and single-piece production alike. Contact Metav Werkzeuge for holder compatibility advice and availability of the Tungaloy CCGT04T101 SH725 indexable insert Technical data Article number: 6737265 Manufacturer SKU: TUN6737265 Brand: Tungaloy Model series: ISO turning indexable inserts Application: Turning Facts Included angle: 80° Corner radius: 0.1 mm Relief angle: 7° Thickness: 1.59 mm Size: 04 Special features Grade / coating: SH725 Cutting material: coated carbide Chipbreaker: one-sided Hole: cylindrical hole + single-sided countersink (40°–60°) Shape: rhombic Mounting: ISO-compliant geometry for holder compatibility FAQ What materials is this insert best suited for? The CCGT04T101 SH725 insert from Tungaloy is a coated carbide grade optimised for turning where toughness and edge stability are required; the SH725 grade performs well under variable engagement and smaller-tool setups. How does the one-sided chipbreaker affect performance? A single-sided chipbreaker on this indexable insert improves chip control in many turning operations, enabling safer chip evacuation and a more consistent surface finish when the grade and geometry suit the workpiece and machine rigidity. Which holder features are required for proper clamping? Proper clamping requires a holder that matches the insert’s rhombic form, relief angle (7°), thickness (1.59 mm) and fastening style; the CCGT04T101’s cylindrical hole with a single-sided countersink ensures secure, repeatable fixation. Can the insert be used for internal as well as external turning? Yes, the ISO-compliant geometry of the CCGT04T101 SH725 insert supports both external and internal turning applications, provided the selected holder and tool overhang maintain sufficient rigidity. What is the benefit of the 0.1 mm corner radius? The 0.1 mm corner radius delivers improved edge strength for finishing and semi-finishing operations, balancing precision and wear resistance to help achieve consistent surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 04T101 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of the SH725 coated carbide grade, a 0.1 mm corner radius and ISO-standard geometry for consistent edge stability and productive turning results; order directly via Metav Werkzeuge or request application advice from our specialists. CCGT 04T101 SH725 Turning indexable insert by Tungaloy A CCGT 04T101 SH725 indexable insert designed for external and internal turning, delivering stable cutting-edge performance in variable engagement conditions. Rhombic insert CCGT 04 geometry SH725 coated carbide for edge stability 0.1 mm corner radius for fine profiles Cylindrical hole with 40°–60° countersink Consistent machining performance for mixed and small-tool operations The ISO-rated insert offers a predictable process window that supports efficient production. The SH725 grade is a coated carbide developed for toughness and cutting-edge security, which reduces unplanned tool changes and keeps cycle times steady. With an 80° cutting angle and an optimised single-sided chipbreaker, the insert converts form and grade into tangible productivity gains, especially when frequent changes in engagement depth occur. These attributes make the component a pragmatic choice where stable metal removal rates and repeatable surface quality are required. Precision geometry that simplifies tool selection and setup Built to ISO norms, the rhomboid CCGT shape and 04 size reduce complexity in holder matching; compatibility depends on form, relief, tolerance class, clamping and thickness. The 0.1 mm corner radius enables accurate profile turning and fine finishing without sacrificing edge life, while the 7° relief ensures consistent clearance and minimal rubbing in tight overhang setups. A plate thickness of 1.59 mm supports rigidity in compact tooling assemblies, lowering vibration risk and improving dimensional control on the workpiece. Coating and grade benefits translated into cost-efficiency The coated carbide composition delivers a balanced combination of wear resistance and toughness. The SH725 designation indicates a grade optimised for edge stability on a broad range of steels and mixed applications; the result is longer effective tool life and fewer insert changes per production shift. Beyond raw wear figures, the coating stabilises cutting conditions under intermittent cuts and variable feed, which helps to reduce scrap and rework — a measurable impact on total machining cost and throughput. Compatibility, clamping and practical application guidance The insert is supplied with a central cylindrical hole plus a one-sided countersink (40°–60°) enabling secure clamping in common ISO-compatible turning holders and boring bars. The one-sided chipbreaker supports controlled chip flow for external and internal turning tasks, and the geometry is particularly suitable for smaller tools or setups with frequent variation in depth of cut. For efficient integration, select a holder matched to the rhomboid form, ensure correct tolerance class and confirm screw/clamp compatibility to maintain repeatable clamping force and positional accuracy. Contact Metav Werkzeuge for tailored Tungaloy turning recommendations and fast delivery — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application and stocking options Technical data Article number: 6737257 Facts Material: carbide Grade: SH725 Geometry: CCGT 04T101 Corner radius: 0.1 mm Relief angle: 7° Cutting angle: 80° Plate thickness: 1.59 mm Size: 04 Special features Rhomboid plate form With hole Cylindrical hole + one-sided countersink (40°–60°) One-sided chipbreaker ISO turning indexable insert series Suitable for external and internal turning FAQ What materials is this insert suitable for? The CCGT 04T101 SH725 insert is a coated carbide grade engineered for broad material coverage, making it suitable for many steels and mixed turning tasks when the SH725 grade and one-sided chipbreaker are appropriate. How does the SH725 grade affect tool life? The SH725 coated carbide offers enhanced edge stability and toughness, which typically extends useful cutting life under varying engagement conditions and reduces the frequency of insert changes. Which holder features are required for correct clamping? Secure clamping requires a holder compatible with the rhomboid CCGT form, matching tolerance class and clamping geometry; the insert’s central cylindrical hole with one-sided countersink ensures repeatable seating and torque control. Is the insert suitable for finishing operations? Yes—thanks to the 0.1 mm corner radius and consistent edge form delivered by the SH725 grade, the insert is capable of fine profiles and finishing passes while maintaining acceptable edge life. What chip control can be expected from the design? The single-sided chipbreaker provides controlled chip formation for common turning tasks, improving evacuation and reducing the likelihood of chip entanglement in external and internal turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 04T101 SH725 Wendeplatten - Tungaloy
Benefit from the reliable combination of a coated carbide SH725 grade and a 0.1 mm corner radius for stable cutting and consistent surface quality; the robust geometry and ISO conformity reduce set‑up variability and support efficient turning operations. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. CCGT 04T101 SH725 turning insert — Tungaloy, coated carbide for turning with 0.1 mm corner radius CCGT04T101 SH725 is an ISO‑format indexable turning insert designed for general turning applications where stable cutting and repeatable results are required Coated carbide grade SH725 0.1 mm corner radius for edge strength Rhombic 80° form for versatile turning Cylindrical hole with 40°–60° countersink Stable chip control and predictable cutting performance The insert’s one-sided chipbreaker and SH725 coated carbide combine to deliver consistent chip formation under variable engagement conditions. The chipbreaker geometry is tailored for turning operations, reducing the risk of irregular chips that interrupt machining cycles and improving process reliability. For operators unfamiliar with chip control: a dedicated chipbreaker shapes the metal flow away from the cutting zone, which helps to lower built-up edge and protect the cutting edge, resulting in stable cutting and more uniform surface finish. Secure mounting and ISO compatibility for fast tool changes The rhombic form and the cylindrical hole plus single‑side countersink (40°–60°) ensure reliable seating and repeatable orientation in compatible toolholders. Because the insert follows the ISO turning insert format, compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The through‑hole with countersink provides positive clamping and reduces micro‑movement during operation, which supports machining consistency and shortens downtime associated with adjustments. Geometry and material engineered for variable conditions A 0.1 mm corner radius together with a 7° clearance angle and an 80° included angle offers a balance between edge strength and cutting versatility. The 1.59 mm thickness and rhombic geometry make the insert suitable for both external and internal turning where a compact insert is preferred. The coated carbide substrate is formulated to resist edge chipping and to maintain wear resistance across a broad range of steels and general turning applications. For non‑specialists: the corner radius helps distribute cutting forces, which increases edge life; clearance and included angles influence the contact conditions and chip flow. Practical application and selection guidance This insert is intended for turning and is supplied as part of a system comprising the ISO insert, a matching external holder or boring bar, a shim/clamp set and replacement screws. Select the SH725 grade and the one‑sided chipbreaker to match workpiece material, cutting strategy and machine rigidity; choosing an appropriate grade and chipbreaker reduces tooling cost per part and improves throughput. For detailed process parameters or material‑specific recommendations, the supplier’s technical documentation and service engineers can provide cutting data and optimisation tips. For application advice and to secure supply of Tungaloy inserts in grade SH725, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss toolholder compatibility and batch availability Technical Data Article number: 6737269 Manufacturer SKU: TUN6737269 SKU: 6737269-Tungaloy Model series: ISO turning inserts Material: carbide Grade/coating: SH725 Facts Size: 04 Thickness: 1.59 mm Corner radius: 0.1 mm Clearance angle: 7° Included angle: 80° Special features Rhombic form With hole Cylindrical hole + single‑side countersink (40°–60°) One‑sided chipbreaker Coated carbide grade SH725 Application: turning FAQ What materials is this insert suitable for? The CCGT04T101 SH725 insert in coated carbide is designed for a broad range of turning tasks and performs well on common steels and general turning applications, thanks to the SH725 grade’s toughness and edge stability. How does the 0.1 mm corner radius affect performance? A 0.1 mm corner radius increases edge strength and distributes cutting forces, which helps to reduce chipping during interrupted cuts and supports a reliable surface finish when using the CCGT 04T101 SH725 turning insert. Is the insert compatible with standard ISO holders? Yes; the insert follows ISO dimensions and mounting conventions, but compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness — ensure the holder accepts rhombic 04 inserts with 1.59 mm thickness. What is the function of the countersunk hole? The cylindrical hole with a 40°–60° countersink enables secure clamping and repeatable positioning in the toolholder, reducing micro‑movement and improving machining stability during turning operations. Can this insert be used for internal as well as external turning? With its rhombic geometry and compact thickness, the insert is suitable for both external and internal turning where the toolholder geometry permits proper seating and clearance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 04T101 SH730 Wendeplatten - Tungaloy
The combination of a tough coated carbide grade (SH730), a 0.1 mm corner radius and ISO conformity ensures consistent turning performance and reliable edge stability in varying engagement conditions; order the insert directly via Metav Werkzeuge or contact the consultants for technical advice. CCGT 04T101 SH730 indexable turning insert for turning — Tungaloy The CCGT 04T101 SH730 is an ISO‑standard rhombic indexable insert for external and internal turning, designed with a 0.1 mm corner radius, a 7° relief angle and a cylindrical mounting hole with single‑sided countersink. ISO rhombic insert CCGT 04T101 Coated carbide grade SH730 0.1 mm corner radius for fine finishing Cylindrical hole with single‑sided countersink Consistent edge life for variable engagement The coated carbide formulation delivers a balance between toughness and wear resistance that is particularly suited to turning operations with fluctuating depths of cut. The SH730 grade is described as a tough, edge‑stable option, which means improved resistance to chipping when used on smaller tool setups or when cutting conditions vary. This results in fewer unexpected tool changes and steadier process control, supporting higher uptime on the shop floor. Precision fit and reliable clamping for repeatable results With an ISO designation and standardised geometry, the insert integrates into established toolholder systems where compatibility depends on form, relief, tolerance class, fastening and thickness. The rhombic form and the cylindrical hole with single‑sided countersink (40°–60°) provide secure seating in compatible holders and permit consistent clamping repeatability. Clear mechanical mating between insert and holder reduces run‑out and helps maintain dimensional accuracy across batches. Small radius, smooth surface and application flexibility The 0.1 mm corner radius enables refined surface finishes and controlled chip formation when finishing or light roughing. Combined with a 7° relief angle and a nominal plate thickness of 1.59 mm, the geometry supports fine turning operations while maintaining sufficient edge strength. Selecting the appropriate chipbreaker and the SH730 grade according to workpiece material and stability will further optimise chip control and surface quality. For reliable turning performance and availability of the Tungaloy SH730 CCGT 04T101 insert, contact Metav Werkzeuge for stock information and tailored technical guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: 6862178 Manufacturer SKU: TUN6862178 SKU: 6862178-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: Carbide Application: Turning Brand: Tungaloy Measurements ISO designation: CCGT04T101 Plate size: 04 Thickness: 1.59 mm Corner radius: 0.1 mm Relief angle: 7° Main angle: 80° Design and features Rhombic insert form Coated carbide grade SH730 One‑sided chipbreaker Cylindrical hole with single‑sided countersink (40°–60°) ISO‑standard indexable turning insert FAQ What materials is this insert suited for? The SH730‑graded insert is designed as a tough, edge‑stable coated carbide for general turning; material selection for best results should match the chipbreaker and machining stability to the workpiece. How does the 0.1 mm corner radius affect finish and tool life? A 0.1 mm corner radius gives finer surface results and better control of cutting forces during light cuts, while the SH730 coating maintains edge stability to reduce chipping risk. Is the insert compatible with standard ISO holders? The ISO designation CCGT04T101 indicates compatibility with holders that match form, relief, tolerance class, fastening, size and thickness; correct holder selection is necessary for optimal performance. What is the exact article and SKU for ordering? The article number is 6862178 and the SKU is 6862178‑Tungaloy; Metav Werkzeuge can confirm holder compatibility and availability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 04T101 SH730 Wendeplatten - Tungaloy
Benefit from the combination of SH730 coated carbide and a precise 0.1 mm corner radius for consistent chip control and extended tool life; reliable compatibility with ISO-standard holders ensures predictable assembly. Order the CCGT04T101 SH730 turning insert directly via Metav Werkzeuge or consult our technical team for application advice. CCGT 04T101 SH730 – ISO rhombic turning insert by Tungaloy CCGT04T101 SH730 is an ISO-standard rhombic indexable insert for external and internal turning, engineered for stable cutting-edge behaviour in variable engagement conditions. Tough SH730 coated carbide substrate ISO rhombic insert CCGT04 form 0.1 mm corner radius for precise turning Cylindrical hole with single-side countersink Greater uptime through a tough coated substrate The CCGT04T101 SH730 insert is built from coated carbide, a combination of a wear-resistant substrate and a tailored surface layer that reduces flank wear and resists chipping. This construction results in longer tool life and fewer changeovers, directly improving machining uptime and lowering per-part costs. For production environments where variable cut conditions occur, the SH730 grade provides a balance of toughness and edge stability that supports repeatable results and predictable performance. Precision and surface quality with controlled geometry A corner radius of 0.1 mm together with the 7° clearance angle and the insert’s ISO rhombic geometry delivers a consistent cutting action suited to finishing and semi-finishing passes. The small radius helps achieve fine surface finishes while limiting cutting forces on slender toolholders. The one-sided chipbreaker guides chips reliably during turning; selecting the correct chipbreaker and grade reduces vibration and improves dimensional control when machining external or internal profiles. Secure clamping and compact design for small-tool applications The insert’s cylindrical hole with a single-side countersink (40°–60°) ensures repeatable, secure clamping in matched toolholders, helping to maintain concentricity under intermittent loads. With a slim plate thickness of 1.59 mm, this indexable insert is especially suitable for compact tool assemblies and setups with limited overhang. The combination of a stable cutting edge and compact form factor enhances confidence in short-run or mixed-batch production where tool change speed and flexibility matter. For tailored tooling recommendations or swift delivery of Tungaloy turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will advise on holder compatibility and optimal chipbreaker selection. Technical data Article number: 6837455 SKU: 6837455-Tungaloy Manufacturer item number: TUN6837455 Model series: ISO turning indexable inserts Type designation: CCGT04T101 SH730 Core data Corner radius: 0.1 mm Clearance angle: 7° Included angle: 80° Plate thickness: 1.59 mm Size: 04 Special features Coating / grade: SH730 Cutting material: coated carbide Chipbreaker: one-sided Hole: with cylindrical hole and single-side countersink (40°–60°) Insert shape: rhombic Application: external and internal turning FAQ Which turning tasks is this insert best suited for? The CCGT04T101 SH730 insert is designed for external and internal turning operations where variable engagement or smaller tool assemblies demand a tough, stable cutting edge. What advantages does the SH730 grade provide? SH730 offers a tough, edge-stable coating that reduces chipping and extends tool life under fluctuating cut conditions, making it a practical choice for versatile turning tasks. How does the 0.1 mm corner radius affect results? A 0.1 mm radius helps to produce finer surface finishes and reduces peak cutting forces, which is beneficial when using compact holders or when machining delicate profiles. How to ensure compatibility with a holder? Compatibility depends on insert form, clearance angle, tolerance class, clamping method, size and thickness; verify these parameters against the holder specifications before assembly. What is the manufacturer SKU for ordering? Order using SKU 6837455-Tungaloy for the CCGT04T101 SH730 indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 04T101 SH730 Wendeplatten - Tungaloy
Benefit from the SH730 coated carbide grade and the rhombic 80° form with a 0.1 mm corner radius for reliable turning performance and consistent surface quality; order the insert directly via Metav Werkzeuge or contact our technical consultants for application advice. CCGT04T101 SH730 – Turning insert (80° rhombic, 0.1 mm radius) by Tungaloy CCGT04T101 SH730 is an ISO‑format turning indexable insert engineered for precision external and internal turning in standard ISO tool systems. Coated carbide grade SH730 for edge stability Rhombic 80° geometry for strong cutting engagement Cylindrical hole with 40°–60° countersink for secure clamping Single‑sided chipbreaker for consistent chip control Robust edge life where engagement varies The SH730 coating on a carbide substrate provides a tough, edge‑stable cutting geometry that is particularly suited to smaller tool holders and operations with changing depth of cut. This grade balances wear resistance and toughness to reduce premature chipping and to maintain a predictable cutting edge under varying forces. As a result, tool changes are less frequent and process reliability improves, which helps to lower machining downtime and keeps component quality consistent. Secure clamping and ISO compatibility for safe, repeatable set‑ups The insert's rhombic 80° outline combined with a cylindrical hole with one‑sided countersink (40°–60°) ensures reliable mechanical location and axial retention in compatible holders. Compatibility with a given toolholder is determined by form, clearance angle (7°), tolerance class, fastening method, size and thickness; these parameters together guarantee correct seat and clamping force. The 0.1 mm corner radius supports fine finishing and reduced cutting forces on small diameters, while the standardized form maintains interchangeability across ISO tooling systems. Practical machining benefits and recommended applications Designed for external and internal turning, the insert features a single‑sided chipbreaker and a plate thickness of 1.59 mm, size 04, making it effective for controlled chip formation and surface finish on a broad range of turning tasks. The typical system comprises the ISO insert, a matching external holder or boring bar, a shim/clamping set and spare screws; ensuring all components meet the same tolerances improves run‑out and repeatability. For best results, select the chipbreaker and grade in line with the workpiece material and machining stability to exploit the insert's productivity potential. For dependable turning performance with Tungaloy quality, request availability or tailored application guidance from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for immediate technical support and ordering assistance. Technical Data Article number: 6862179 SKU: 6862179-Tungaloy Manufacturer SKU: TUN6862179 Model series: ISO turning indexable inserts Material: carbide Grade/coating: SH730 Facts Corner radius: 0.1 mm Insert angle: 80° Clearance angle: 7° Thickness: 1.59 mm Size: 04 Special features Shape: rhombic insert Chipbreaker: single‑sided Hole: cylindrical hole with one‑sided countersink 40°–60° Suitable for: external and internal turning System components: insert, holder or boring bar, shim/clamping set, spare screws FAQ What holder features must be checked for compatibility? Compatibility is determined by insert form, clearance angle, tolerance class, fastening type, size and thickness; check the holder matches the CCGT04T101 SH730 geometry and fastening specifications. Is this insert suitable for finishing small diameters? Yes. The 0.1 mm corner radius and the rhombic 80° geometry make the insert suitable for fine finishing on smaller diameters and for operations requiring controlled cutting forces. What does the SH730 grade offer compared with general grades? The SH730 coated carbide grade is formulated for toughness and edge stability, offering improved resistance to chipping in variable engagement conditions while maintaining acceptable wear life. Can the insert be used for internal and external turning? Yes. The design and ISO format of this insert allow use in both external and internal turning applications when mounted in an appropriate holder or boring bar. How does the clamping hole design affect performance? The cylindrical hole with a one‑sided countersink (40°–60°) provides stable axial location and secure clamping, reducing the risk of insert loosening and improving repeatable positioning during production runs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 04T101 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of low cutting forces, reliable uncoated carbide performance and precise geometry for consistent turning results; order directly via Metav Werkzeuge or consult our specialists for application advice. CCGT 04T101 TH10 – Rhombic ISO Turning Insert (0.1 mm radius, 7° relief) – Tungaloy The CCGT 04T101 TH10 is an ISO-standard rhombic turning insert designed for external and internal turning, optimised for non-ferrous materials and operations requiring low cutting forces and fine surface finishes. ISO rhombic turning insert CCGT 04T101 TH10 Uncoated carbide for low cutting forces 0.1 mm corner radius for fine finishes Compatible with holders requiring 7° relief Reliable finishes with low cutting force geometry The insert’s 0.1 mm corner radius and sharp, uncoated TH10 carbide grade are engineered to produce consistently fine surfaces when machining softer and non-ferrous materials. The small corner radius reduces radial cutting engagement, which lowers cutting forces and vibration; this leads to improved dimensional stability and a more predictable surface texture during both light finishing cuts and routine profile turning. For workshops seeking regular, repeatable finishes, the geometry supports a reduction in rework cycles and enhances process reliability. Seamless integration into ISO tool systems As an ISO-standard component, the rhombic-shaped insert features a central hole with a cylindrical bore and a one-sided countersink (40°–60°), which ensures secure fastening in compatible holders. The specified 7° relief angle and a plate thickness of 1.59 mm make the insert suitable for a wide range of standard external holders and boring bars; compatibility is determined by form, relief angle, tolerance class, fastening and size. This predictable fit simplifies tooling logistics and shortens setup times on multi-machine shop floors. Material suitability and chip control explained The uncoated TH10 grade is a sharp, universal carbide optimised for non-ferrous materials and applications where a bare cutting edge helps to lower cutting forces and yield cleaner surfaces. The insert includes a single-sided chipbreaker, which promotes controlled chip formation for many turning tasks; this is particularly useful when machining brass, aluminium alloys and similar materials where chip control and surface integrity are priorities. For mixed-production environments, selecting the correct chipbreaker and holder stability will directly influence cycle times and tool life. Practical benefits for everyday production Designed as part of the ISO turning insert family, the rhombic CCGT form with a 04 size and the listed dimensional parameters provides a cost-effective option for shops that require predictable interchangeability and consistent part quality. The simplicity of an uncoated carbide edge reduces the tendency for built-up edge on softer alloys, while the standardised form factor helps to keep tooling inventories compact and changeovers rapid. For operations aiming to increase throughput without compromising finish, the combination of geometry and grade delivers measurable gains in process consistency. For application support or to specify the CCGT 04T101 TH10 for a particular material or holder combination, contact Metav Werkzeuge for tailored advice and immediate availability. Technical data Article number: 6862140 Manufacturer SKU: TUN6862140 Our SKU: 6862140-Tungaloy Series: ISO turning inserts Product designation: CCGT04T101 TH10 Facts Corner radius: 0.1 mm Plate thickness: 1.59 mm Insert size: 04 Relief angle: 7° Included angle: 80° Special features Material: carbide (uncoated) Grade: TH10 Plate form: rhombic Chipbreaker: single-sided Hole: cylindrical bore with one-sided countersink (40°–60°) Application: external and internal turning Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The CCGT 04T101 TH10 insert is optimised for non‑ferrous materials such as aluminium and brass; the uncoated TH10 carbide grade supports low cutting forces and clean surface finishes. Can the insert be used for both external and internal turning? Yes, the ISO rhombic form and secure central fixing (cylindrical hole with countersink) make the insert suitable for both external and internal turning when paired with the correct holder. How does the 0.1 mm corner radius affect machining? A 0.1 mm corner radius reduces cutting engagement and vibration, improving surface finish and dimensional control for finishing and light turning passes. Is a coated grade available for harder materials? The listed article is an uncoated carbide TH10 grade intended for low‑force applications; for harder materials or heavy roughing, consider a coated grade or different carbide sort—Metav Werkzeuge can advise on alternatives. What determines compatibility with my toolholder? Compatibility depends on the insert’s form, 7° relief angle, tolerance class, fastening method, size and thickness; ensure the holder matches these parameters for secure clamping and correct geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 04T101 TH10 Wendeplatten - Tungaloy
The combination of uncoated carbide performance, a 0.1 mm corner radius and ISO compliance delivers low cutting forces and clean surface quality for non-ferrous turning operations; order the insert directly via Metav Werkzeuge or contact the consultants for process recommendations. CCGT 04T101 TH10 indexable turning insert — rhombic 80° geometry, uncoated carbide, Tungaloy The CCGT04T101 TH10 is an ISO‑format indexable turning insert designed for general turning; its rhombic, 80° profile and single‑sided chipbreaker suit external and internal turning where low cutting forces and fine finishes are required. Uncoated carbide for low cutting forces 0.1 mm corner radius for fine finishes Rhombic 80° geometry for versatile turning Cylindrical hole with 40°–60° countersink Precise, low‑force machining for non‑ferrous components The uncoated carbide composition of this indexable insert provides a sharp, robust cutting edge that reduces cutting resistance and supports superior surface integrity when machining non‑ferrous materials. The TH10 grade is formulated for universal use where an uncoated edge promotes low heat build‑up and minimal burr formation. The small 0.1 mm corner radius helps achieve fine surface finishes while maintaining predictable tool life under stable cutting conditions. The single‑sided chipbreaker promotes controlled chip formation, making the insert suitable for both finishing and light medium roughing in suitable materials. ISO compatibility and secure clamping for consistent results Produced to ISO dimensions, the insert fits standard ISO turning systems when the holder matches form, clearance angle, tolerance class, fixing method, size and thickness. The rhombic plate shape with an 80° included angle provides access for external and internal profiles while preserving rigidity in the tool seat. The insert is supplied with a cylindrical hole and a one‑side countersink (40°–60°) for reliable clamping and repeatable positioning. Standardised geometry simplifies inventory management and reduces set‑up time, contributing to higher uptime and predictable machining outcomes. Application guidance and process advantages Select the single‑sided chipbreaker and TH10 grade when machining aluminium alloys, brass and other non‑ferrous workpieces or when low cutting forces and clean part surfaces are priorities. The uncoated cutting edge minimises built‑up edge in sticky materials and supports fine tolerances in finishing passes. For less rigid setups or heavy roughing, consider a different grade or a reinforced geometry; for finishing and light profiling, the rhombic insert delivers balance between access and stability. For process parameter suggestions and holder matching, the Metav Werkzeuge technical team can provide tailored recommendations to optimise feed, speed and depth of cut. Request the Tungaloy CCGT04T101 TH10 indexable insert through Metav Werkzeuge for efficient non‑ferrous turning; technical advice and machining recommendations are available from Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6862141-Tungaloy Manufacturer article number: 6862141 Manufacturer SKU: TUN6862141 Model series: ISO turning inserts Facts Plate size: 04 Plate thickness: 1.59 mm Corner radius: 0.1 mm Clearance angle: 7° Included angle: 80° Special features Carbide (uncoated) Grade: TH10 Plate shape: rhombic Chipbreaker: single‑sided Hole: cylindrical with one‑side countersink (40°–60°) Typical application: turning Compatibility depends on form, clearance, tolerance, fixing, size and thickness FAQ What materials is this insert best suited to? The CCGT04T101 TH10 insert is optimised for non‑ferrous materials such as aluminium and brass; the uncoated carbide grade TH10 supports low cutting forces and clean surface finishes. How does the 0.1 mm corner radius influence results? A 0.1 mm corner radius improves surface finish and reduces edge pressure during finishing passes; the small radius is effective for precise profiling with the rhombic 80° geometry. Is the insert compatible with standard ISO holders? Yes — the insert follows ISO dimensions; compatibility requires matching holder form, clearance angle, tolerance class, fixing method, size and thickness for secure clamping. What is the purpose of the cylindrical hole with countersink? The cylindrical hole plus one‑side countersink (40°–60°) ensures repeatable seating and reliable clamping force in standard indexable turning toolholders. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 04T102 IC908 Indexable Insert - ISCAR
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features for indexable inserts CCGT 04T102 from ISCAR Brand: ISCAR Manufacturer Order Number: CCGT04T102-F1PIC908 Facts and Figures: ISO-Code: CCGT04T102 Clearance Angle: 7° Angle: 80° Radius: 0.2 Features Material: cemented carbide Grade: IC908 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: SMALL TURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. The mention of protected trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCGT-04T102-IC908-ISCAR 40END
CCGT 04T102 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of a robust SH7025 cutting grade, precise 0.2 mm corner radius, and an 80° rhombic geometry for predictable turning performance and consistent chip control; order the insert directly via Metav Werkzeuge or consult our advisers for assistance. CCGT 04T102 SH7025 Tungaloy indexable turning insert — 80° rhombic geometry, 0.2 mm corner radius A CCGT 04T102 SH7025 indexable insert designed for general turning applications, compatible with ISO holders and optimised for mixed engagement conditions. CCGT04T102 SH7025 for turning tasks 80° rhombic geometry for versatile turning 0.2 mm corner radius for repeatable contours Single‑sided chipbreaker with mounting hole Reliable performance for mixed turning operations The SH7025 cutting grade is a coated cemented carbide designed for toughness and edge stability, making it suitable for turning where cutting conditions vary between light and interrupted cuts. The grade’s balance between wear resistance and edge strength reduces the risk of chipping when smaller tools are used or when engagement depth fluctuates, resulting in more consistent cycle times and fewer insert changes. This contributes directly to predictable process outputs in short‑run and batch production. Geometry and chip control that reduce rework The 80° rhombic geometry combined with a single‑sided chipbreaker provides controlled chip formation and evacuation on external and internal turning operations. The 0.2 mm corner radius helps maintain contour accuracy while avoiding excessive cutting forces, which is particularly beneficial when machining narrow shoulders or stepped diameters. Explained simply, the chipbreaker guides chips away from the cutting zone to protect the workpiece and toolholder, lowering the likelihood of surface damage and secondary finishing. System compatibility and straightforward integration This ISO‑standard insert fits a wide range of external holders and boring bars; compatibility is determined by form, clearance angle, tolerance class, mounting style, size and thickness. The insert is supplied with a central hole and a cylindrical hole plus a unilateral countersink (40°–60°), enabling secure clamping with common screw systems. Specifying ISO turning plates simplifies procurement and replacement management across multiple machines and operators. Material advantages and lifecycle considerations Manufactured from cemented carbide and finished with the SH7025 coating, the insert offers robust wear properties under variable cutting regimes. The modest 1.59 mm thickness and precise tolerances ensure stability in small‑tool setups, while the grade’s emphasis on stable chip formation extends usable life under fluctuating feeds or intermittent cuts. In practice, this translates into fewer tool changes and improved uptime on the shop floor. For tailored advice on holder selection or batch pricing, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 and request guidance for the CCGT 04T102 SH7025 insert Technical data Article number: 6967423 SKU: 6967423-Tungaloy Manufacturer SKU: TUN6967423 Facts Corner radius: 0.2 mm Included angle: 80° Clearance angle: 7° Plate thickness: 1.59 mm Size designation: 04 Special features Rhombic plate shape With hole — cylindrical hole + single‑side countersink (40°–60°) Single‑sided chipbreaker Coating/grade: SH7025 Material: cemented carbide Application: Turning (external and internal) Model series: ISO turning inserts FAQ What workpiece materials is this insert suited to? The CCGT 04T102 SH7025 Tungaloy insert is formulated as a tough, coated cemented carbide grade suitable for a broad range of materials typically encountered in turning; select the chipbreaker and cutting data according to the specific workpiece alloy. How does the chipbreaker affect performance? A single‑sided chipbreaker on this indexable insert controls chip shape and evacuation, which protects the workpiece surface and reduces the risk of chip entanglement during continuous and interrupted cuts. Which holders are compatible with this ISO plate? Compatibility is governed by the plate form, clearance angle, tolerance class, mounting method, size and thickness; the ISO designation means the insert fits standard external holders and compatible boring bars when the holder matches the CCGT 04T102 geometry. What advantages does the 0.2 mm corner radius provide? The 0.2 mm radius improves contour repeatability and reduces the tendency for sharp edge chipping, offering a balance between finish quality and cutting edge strength for detailed turning features. Is this insert suitable for interrupted cuts? Yes. The SH7025 grade is engineered for edge stability under varying engagement conditions, making the insert resilient in intermittent cutting scenarios. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 04T102 SH7025 Wendeplatten - Tungaloy
Benefit from the combination of SH7025 coated carbide and a 0.2 mm corner radius for stable cutting and fine finishing. The ISO‑standard geometry and a cylindrical hole with a 40°–60° countersink ensure reliable clamping in compatible toolholders. Order the insert directly via Metav Werkzeuge or ask our consultants for application advice. CCGT 04T102 SH7025 — ISO turning insert, coated carbide — Tungaloy The CCGT04T102 SH7025 is an ISO‑standard rhombic turning insert intended for external and internal turning, offering a 7° clearance angle and a compact thickness for small‑tool applications. ISO‑standard rhombic geometry SH7025 coated carbide grade 0.2 mm corner radius With cylindrical hole and countersink 7° clearance angle Stable, tough cutting with a specialised grade The SH7025 grade is a coated carbide designed for toughness and edge stability, which translates into predictable performance under varying engagement conditions. This characteristic reduces the risk of premature chipping when cutting interruptions or unstable setups occur, making the insert particularly suitable for operations where small tools or fluctuating cut depth are used. By choosing a tough, edge‑stable grade, production planners gain longer useful tool life and fewer unplanned tool changes, improving overall process efficiency. Reliable fit in ISO tool systems for fast changeovers The ISO‑compliant geometry guarantees compatibility across standard holders when form, free angle, tolerance class, fastening, size and thickness match. The insert’s 1.59 mm thickness and 04 size conform to common ISO turning systems, which simplifies inventory management and tool‑holder selection. Because the system requires only the correct combination of holder and insert, changeovers are quicker and less error‑prone, supporting repeatable setups and consistent part quality in batch production. Precision geometry for surface quality and chip control A 0.2 mm corner radius combined with a rhombic shape and an 80° included angle provides a good balance between strength and the ability to achieve fine surface finishes. The single‑sided chipbreaker is tuned for effective chip control in typical turning operations, reducing manual chip handling and improving machine uptime. This geometry is particularly useful for finishing passes and light turning, where a small radius helps meet tight dimensional and surface requirements. Practical securing and application details for workshop use The insert features a cylindrical hole with a single‑side countersink (40°–60°) for secure clamping and straightforward replacement using standard screws. Its compact 1.59 mm plate thickness and 7° clearance angle make it compatible with many external and internal turning holders; matching holder geometry and tolerance class remains essential for correct seating. For best results, select the chipbreaker and grade according to the workpiece engagement and setup rigidity — the SH7025 grade is particularly recommended for small‑tool scenarios and mixed engagement conditions. The result is a dependable insert that supports productive turning cycles. For precise, reliable turning with Tungaloy’s SH7025 grade, contact Metav Werkzeuge for availability and application advice: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 6967430 SKU: 6967430-Tungaloy Manufacturer SKU: TUN6967430 Facts Included angle: 80° Corner radius: 0.2 mm Clearance angle: 7° Thickness: 1.59 mm Size: 04 Special features Coating / grade: SH7025 Material: carbide Shape: rhombic Hole: with hole (cylindrical hole + single‑side countersink 40°–60°) Chipbreaker: one‑sided Application: turning Model series: ISO‑turning inserts FAQ What turning tasks is this insert suitable for? The CCGT04T102 SH7025 Tungaloy turning insert is designed for external and internal turning tasks, with particular suitability for small‑tool operations and varying engagement conditions. Which geometric data should be considered for holder compatibility? Compatibility depends on form, free angle, tolerance class, fastening, size and thickness; the insert has a 7° clearance angle, 1.59 mm thickness and 04 size, which should match the chosen holder. How does the chip control work with this insert? The single‑sided chipbreaker integrated into the insert geometry helps manage chips effectively during turning, supporting smoother cutting conditions and easier chip evacuation with the CCGT04T102 SH7025. What clamping features does the insert provide? The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°) for secure clamping in ISO‑compatible toolholders; ensure the holder’s fastening and tolerance class correspond to the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 04T102 SH7025 Wendeplatten - Tungaloy
Take advantage of the coated carbide SH7025 for exceptional edge stability and the compact 0.2 mm corner radius for fine finishing; reliable ISO compatibility ensures fast tool replacement and consistent productivity — order directly via Metav Werkzeuge or consult our specialists for selection support. CCGT 04T102 SH7025 Tungaloy turning insert — ISO rhombic insert with 80° geometry and one-sided chipbreaker CCGT04T102 SH7025 Tungaloy is an ISO‑standard turning insert designed for general turning applications where stable cutting edges and predictable chip control are required Coated carbide grade SH7025 Rhombic CCGT form with 80° geometry 0.2 mm corner radius for fine finishing One-sided chipbreaker for controlled chips Consistent cutting performance for demanding turning tasks This indexable insert is built from coated carbide (SH7025) and developed for turning operations where a balance of toughness and edge stability is needed. The grade is expressly suited to smaller tools or varying engagement conditions, which translates into fewer insert changes and reduced machine downtime. The combination of the coating with the substrate material improves wear resistance while maintaining cutting-edge integrity, so chip formation remains stable even under fluctuating loads. Designed for rapid interchange and compatibility with ISO systems The insert conforms to ISO specifications; compatibility with a holder is determined by form, 7° clearance angle, tolerance class, fastening method, size and thickness. This makes it straightforward to match the part with existing external holders or boring bars, reducing setup time. Clear specification of these parameters supports predictable assembly and repeatable clamping, which benefits batch production and short‑run turning alike. Geometry tuned for surface quality and chip control The rhombic geometry with an 80° main angle and a 0.2 mm corner radius facilitates fine finishing passes while preserving a robust cutting edge for semi‑roughing. The one‑sided chipbreaker helps channel chips away from the cutting zone, lowering the risk of re‑cutting and improving surface finish. The insert’s cylindrical hole with a single‑side countersink (40°–60°) ensures secure seating and straightforward screw fixation, contributing to vibration damping and consistent cutting conditions. Practical system approach and selection guidance With a plate thickness of 1.59 mm, the insert sits low in the cutter body for stable contact; the system typically comprises the indexable insert, a compatible external holder or boring bar, a backing or clamp set and replacement screws. Choosing the correct chipbreaker and SH7025 grade according to the workpiece material and machining strategy yields longer runtimes and lower operating costs. For applications where tool life and repeatability matter, this insert offers a pragmatic balance between productivity and surface quality. For proven edge stability choose the Tungaloy SH7025 insert and contact Metav Werkzeuge for application advice and immediate availability — Metav Werkzeuge will support selection and supply to match specific turning requirements Technical Data Article number: 6967395 Manufacturer SKU: TUN6967395 SKU: 6967395-Tungaloy Model designation: CCGT04T102 Item label: CCGT04T102 SH7025 Tungaloy-Wendeplatte Facts Plate size: 04 Plate thickness: 1.59 mm Corner radius: 0.2 mm Clearance angle: 7° Geometry angle: 80° Special features Material: coated carbide (Hartmetall) Grade: SH7025 (tough, edge‑stable) Plate form: rhombic (CCGT) Chipbreaker: one‑sided Hole: with hole — cylindrical hole + single‑side countersink (40°–60°) Application: Turning (Drehen) FAQ What materials is this insert suitable for? The insert in grade SH7025 is a tough, edge‑stable coated carbide designed for general turning; material suitability depends on the chosen chipbreaker and machining parameters. How does the 0.2 mm corner radius affect surface finish? A 0.2 mm corner radius produces a finer surface on finishing passes while retaining sufficient strength for light roughing when set up correctly. Which holder features must match the insert? Compatibility requires matching form, 7° clearance angle, tolerance class, fastening type, size and thickness; these parameters ensure secure seating and repeatable results. Is the insert supplied with screws or clamps? The insert is part of a system that typically includes the insert, a compatible external holder or boring bar, a backing/clamp set and replacement screws; check the complete system configuration when ordering. What is the manufacturer article number and SKU for ordering? The manufacturer article number is 6967395 and the manufacturer SKU is TUN6967395 for this Tungaloy turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 04T102 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of precise ISO‑compliant geometry, robust SH725 coating and simple compatibility with standard holders for efficient turning operations. The design delivers reliable edge stability and consistent surface finish while reducing changeover effort — order the CCGT04T102 SH725 indexable insert directly via Metav Werkzeuge or ask our consultants for application support. CCGT04T102 SH725 CCGT indexable insert for turning — Tungaloy CCGT04T102 SH725 is a coated cemented carbide indexable insert engineered for ISO‑standard external and internal turning, offering stable cutting edges and predictable performance in variable engagement conditions. SH725 coated cemented carbide grade ISO rhombic CCGT geometry, 80° angle 0.2 mm corner radius for fine finishing Cylindrical hole + single‑side countersink Reliable geometry for predictable turning performance The insert features an 80° CCGT rhombic geometry that provides a balanced contact angle between tool and workpiece, making it suitable for stable external and internal turning. The combination of a 0.2 mm corner radius and the specified 1.59 mm thickness enables a good compromise between edge strength and achievable surface finish, while the 7° clearance reduces rubbing and heat build‑up. ISO standardisation of the form and mounting ensures interchangeability with matching external holders and boring bars, simplifying tooling logistics and reducing machine downtime. Coating and grade engineered for edge stability and tool life The cutting grade SH725 is a coated cemented carbide designed for toughness and sustained edge integrity, particularly effective on smaller inserts or in operations with varying depths of cut. The single‑sided chipbreaker geometry assists controlled chip formation and evacuation, improving process security and surface quality. Coating technology reduces flank wear and extends productive cutting time, lowering the frequency of insert changes and contributing to overall cost efficiency in serial production. System compatibility and practical mounting details Mounting is via the cylindrical hole with single‑side countersink (40°–60°), which secures repeatable seating and clamping in standard ISO holders. Correct selection of holder form, relief angle and tolerance class ensures optimal contact and repeatable performance; the insert is intended for use in a complete system comprising an ISO turning insert, an appropriate external holder or boring bar, a backing plate/clamp set and replacement screws. For applications requiring specific holder geometry or for machining different materials, the technical documentation and specimen setups help to match feed and speed recommendations precisely. For tailored advice on inserts, holders or process parameters for Tungaloy turning tools, contact Metav Werkzeuge for application‑oriented support and component matching via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6737270 Manufacturer SKU: TUN6737270 SKU: 6737270-Tungaloy Brand: Tungaloy Model series: ISO turning indexable inserts Facts Geometry angle: 80° Corner radius: 0.2 mm Relief angle: 7° Plate thickness: 1.59 mm Size designation: 04 Special features Material: coated cemented carbide Grade: SH725 Plate form: rhombic (CCGT) Chipbreaker: single‑sided Mounting: cylindrical hole + single‑side countersink (40°–60°) Application: external and internal turning ISO‑compliant series FAQ What materials is this insert suitable for? The CCGT04T102 SH725 insert is a coated cemented carbide grade optimised for a broad range of steel and alloy turning tasks; the SH725 specification emphasises toughness and edge stability for variable engagement. How is the insert secured in the holder? Mounting uses the cylindrical hole with single‑side countersink (40°–60°); correct holder choice and clamping torque ensure repeatable seating for the CCGT‑style insert (SKU 6737270‑Tungaloy). What benefit does the 0.2 mm corner radius provide? A 0.2 mm corner radius offers improved surface finish and reduced cutting forces for finishing passes while maintaining adequate edge robustness for many common turning operations. Can this insert be used for internal boring as well as external turning? Yes — the 80° rhombic geometry and standard ISO form make the insert suitable for both external and internal turning when installed in a compatible boring or external holder. How does the SH725 coating affect tool life? The SH725 coating enhances flank wear resistance and supports stable chip formation, which increases usable cutting time and reduces the frequency of insert changes in continuous production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 04T102 SH725 Wendeplatten - Tungaloy
Take advantage of the coated cemented carbide SH725 for stable cutting edges and consistent tool life, combined with the ISO CCGT geometry and 80° included angle for versatile external and internal turning. Order the CCGT04T102 SH725 insert directly via Metav Werkzeuge or ask our consultants if needed. CCGT04T102 SH725 ISO indexable insert for turning — Tungaloy The CCGT04T102 SH725 is an ISO‑standard rhombic indexable insert for turning, engineered for reliable edge stability and adaptable performance in external and internal turning operations. Coated carbide grade SH725 for stable cutting edges ISO‑standard CCGT rhombic insert, 80° included angle Pin/slot mounting, cylindrical hole with countersink Suitable for external and internal turning operations Productive turning with consistent edge life The rhombic indexable insert delivers a balanced combination of toughness and wear resistance thanks to the SH725 coating and a cemented carbide substrate. This mix reduces flank and crater wear under varying engagement conditions, which translates into longer tool life and fewer insert changes in batch production. The 80° included angle provides a secure cutting geometry for shoulder and general turning, while the modest 0.2 mm corner radius supports precision finishing without sacrificing stability. Compatibility and mounting for straightforward integration Designed to ISO form and tolerance classes, the insert fits holders and boring bars where form, relief angle, tolerance, fixation and thickness match. The cylindrical hole with single‑side countersink (40°–60°) ensures reliable clamping and repeatable positioning, making assembly and indexation fast and secure. For workshops standardising tooling systems, the insert’s ISO designation simplifies inventory and reduces setup complexity. Practical advantages in varied machining conditions With a one‑sided chipbreaker and a grade optimised for small tools and fluctuating cuts, the insert manages chips reliably across a broad materials range typical for turning. The coated surface improves heat resistance and reduces built‑up edge tendency in intermittent cuts. For operations where tool change time and process stability are priorities, this insert offers a measurable improvement in uptime and surface consistency. Which applications benefit most from this insert The plate is well suited to external facing, shoulder turning and internal boring where ISO CCGT geometry is accepted. The combination of SH725 coated carbide and the rhombic form is particularly advantageous in workshops processing mixed batches or where inserts must tolerate variable engagement depths. Selecting the matching chipbreaker and grade according to workpiece material and machining stability will yield the best economy and surface quality. For tailored application advice or to obtain the Tungaloy CCGT04T102 SH725 insert directly from Metav Werkzeuge, contact our consultants at Metav Werkzeuge for prompt support and supply Technical Data Article number: 6737259 Manufacturer SKU: TUN6737259 Model series: ISO‑Drehwendeschneidplatten Designation: CCGT04T102 SH725 Facts Included angle: 80° Corner radius: 0.2 mm Relief angle: 7° Thickness: 1.59 mm Size: 04 Special features Coated cemented carbide grade SH725 Rhombic plate form, CCGT geometry Cylindrical hole with single‑side countersink (40°–60°) One‑sided chipbreaker For turning; compatible with standard external holders and boring bars FAQ What materials is this insert suitable for? The insert grade SH725 is a coated cemented carbide developed for a broad range of turning applications; it performs well on common steels and mixed materials when the correct chipbreaker and cutting data are applied. How is the insert mounted and secured? The CCGT04T102 features a cylindrical hole with a single‑side countersink (40°–60°) for positive clamping in ISO‑compatible holders and boring bars, ensuring repeatable positioning and secure fixation. What does the 80° specification mean for machining? An 80° included angle on the insert provides robust support for shoulder and general turning operations, enhancing stability and reducing deflection during heavier cuts. Is the SH725 grade suitable for small tools and interrupted cuts? Yes — SH725 is specified for edge stability and toughness, making it particularly suitable for smaller tool rigs and changing engagement where edge robustness is required. Can the CCGT04T102 SH725 be used for finishing passes? With its 0.2 mm corner radius and coated carbide construction, the insert is capable of producing controlled finishes when appropriate feeds and speeds are selected. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 04T102 SH725 Wendeplatten - Tungaloy
Benefit from the combination of the SH725 coated carbide's edge stability, the rhombic ISO geometry and the 0.2 mm corner radius for consistent turning performance; order the insert directly via Metav Werkzeuge or ask the consultants if clarification is required. CCGT 04T102 SH725 – Tungaloy indexable turning insert for Turning, rhombic ISO geometry, 80° approach The CCGT04T102 SH725 Tungaloy insert is an ISO‑standard, rhombic indexable insert engineered for external and internal turning operations where edge stability and reliable chip control are required. Coated carbide grade SH725 Rhombic ISO CCGT geometry 0.2 mm corner radius and 80° approach Cylindrical hole with 40°–60° countersink Stable cutting edge and longer productive life The SH725 grade is a coated carbide developed for toughness and cutting‑edge stability in turning applications, particularly where smaller tools or variable engagement conditions are present. This results in fewer index changes and more predictable tool life, reducing process interruptions. The coating supports wear resistance during interrupted cuts and diverse workpiece materials, so operators gain consistent component tolerances with less rework. Secure clamping and consistent seating for accurate turning Compatibility with the clamping system is determined by geometry, clearance and tolerance class; the ISO-standard rhombic form and the cylindrical hole with one-sided countersink ensure reliable seating on a matching holder. The 80° approach angle combined with a 7° clearance reduces radial cutting forces and stabilises the insert under load, which helps to maintain surface finish and dimensional accuracy during external and internal turning cycles. Controlled chip formation for stable machining A single‑sided chipbreaker in this insert delivers dependable chip control when matched to workpiece material and cutting conditions. For interrupted or variable cuts the coated carbide substrate and chip‑forming geometry reduce the likelihood of built‑up edge and promote continuous swarf evacuation, improving cycle time and lowering secondary operations. Selection of the appropriate chipbreaker and grade should follow the material and the intended cutting strategy. Clear dimensions and mounting details for straightforward integration Key dimensions are compact and optimised for light to medium turning: 1.59 mm thickness, size 04, and a 0.2 mm corner radius providing a balance between edge strength and fine detail capability. The insert's ISO designation relates to standard holders and clamping sets, so replacement and inventory management are simplified. If the holder or clamping set is not yet specified, matching by form, free angle, tolerance, fixation and thickness guarantees correct assembly and repeatability. If unsure whether this insert meets specific requirements or supplementary technical data is needed, Metav Werkzeuge provides application advice and can supply further specifications by email or phone: info@metav-werkzeuge.com, +49 2822 7131930. For productive, reliable turning with Tungaloy's SH725 grade, contact Metav Werkzeuge for availability and tailored application advice. Technical data Article number: 6737258 SKU: 6737258-Tungaloy Manufacturer SKU: TUN6737258 Model series: ISO indexable turning inserts Manufacturer: Tungaloy Facts Insert size: 04 Thickness: 1.59 mm Corner radius: 0.2 mm Clearance angle: 7° Approach angle: 80° Special features Coating / grade: SH725 Base material: carbide Plate form: rhombic Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: Turning FAQ What materials is this insert suited for? The SH725‑grade insert from Tungaloy is a coated carbide designed for a broad range of turning applications; selection of the chipbreaker and cutting data should be matched to the specific workpiece material. How does the 0.2 mm corner radius affect performance? A 0.2 mm corner radius offers a compromise between edge strength and the ability to produce finer contours; the CCGT04T102 geometry maintains stable cutting edges under variable engagements. Is this insert compatible with standard ISO CCGT holders? Yes, the insert follows ISO dimensions and the rhombic form with the specified hole and countersink ensures compatibility with matching ISO CCGT holders when the holder parameters correspond. Can this insert be used for internal turning as well as external turning? The insert is suitable for both external and internal turning; attention to holder rigidity and correct mounting is essential to achieve the expected edge stability from the SH725 grade. What should be checked when replacing an insert with this model? Verify holder form, free angle, tolerance class, fixation method, size and thickness; proper seating of the cylindrical hole and countersink is critical for repeatable clamping and process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 04T102 SH730 Wendeplatten - Tungaloy
Combining SH730 coated carbide with a 0.2 mm nose radius and ISO rhombic geometry delivers stable cutting edges and reliable finishing in diverse turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. CCGT04T102 SH730 ISO turning insert (rhombic, 0.2 mm) – Tungaloy The CCGT04T102 SH730 is an ISO rhombic turning insert for external and internal turning that combines a 0.2 mm corner radius with a single-sided chipbreaker and a 7° clearance for precise, repeatable machining. CCGT ISO rhombic insert for turning SH730 coated carbide for edge stability 0.2 mm nose radius for fine finishing Cylindrical hole with 40°–60° countersink Consistent cutting performance for varying engagement The robust SH730 grade offers a coated carbide substrate engineered for toughness and cutting-edge stability, which is particularly advantageous when cutting conditions change or when smaller tools are used. This turning insert sustains consistent performance under interrupted cuts and varying depths of cut, reducing the frequency of edge changes and supporting longer productive runs. The combination of material technology and geometry improves process repeatability, leading to a more reliable cycle time and consistent surface quality. Precision fit and reduced set-up complexity Conforming to ISO dimensions, the rhombic form and defined parameters such as 7° clearance, 04 size and 1.59 mm thickness simplify tool selection and ensure predictable clamping behaviour. Compatibility with a holder depends on form, clearance, tolerance class, fastening, size and thickness; attention to these factors minimises set-up time and rework. The standardised format facilitates inventory management and allows straightforward replacement in established tool assemblies, helping to keep machine downtime to a minimum. Durable edge control and improved surface finishes The single-sided chipbreaker and the modest 0.2 mm nose radius combine to deliver effective chip formation and controlled contact at the cutting point, which benefits both finishing and light-medium turning tasks. With a carefully matched chip control geometry, the insert promotes stable chip evacuation and a uniform finish, while the coated substrate extends tool life. For customers seeking a balance between economy and performance, this design reduces the need for frequent tool indexing and supports consistent dimensional accuracy. For tailored advice on using the Tungaloy SH730 CCGT04T102 turning insert and selection for specific materials or turning strategies, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6862133 SKU: 6862133-Tungaloy Manufacturer SKU: TUN6862133 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Core data Insert designation: CCGT04T102 Insert size: 04 Shape angle: 80° Corner radius: 0.2 mm Clearance angle: 7° Thickness: 1.59 mm Hole style: cylindrical hole + single-side countersink (40°–60°) Materials & features Grade / coating: SH730 Substrate: coated carbide Chipbreaker: single-sided Plate form: rhombic Application: turning (external and internal) System notes: compatibility depends on holder form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert suitable for? The CCGT04T102 SH730 turning insert is optimised for general turning; the SH730 grade provides toughness and edge stability suitable for a wide range of steels and mixed production conditions. How does the 0.2 mm radius affect finish and tool life? A 0.2 mm nose radius offers a compromise between surface finish and strength: the small radius on this Tungaloy indexable insert supports finer surface quality while maintaining sufficient edge robustness for medium cutting conditions. Is the insert compatible with standard ISO holders? Yes — the insert follows ISO geometry; compatibility requires matching the holder to the insert form, clearance, tolerance class, fastening method, size and thickness. What does the single-sided chipbreaker provide? The single-sided chipbreaker on this insert improves chip control and evacuation in turning operations, contributing to stable cutting and more consistent surface finishes. Can this insert be used for internal and external turning? The rhombic ISO design and chipbreaker geometry make the insert suitable for both external and internal turning operations when correctly clamped and applied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com