Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCGT060201M-FP2 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of consistent chip control and cermet wear resistance combined with precise geometry for dependable turning and boring performance; order genuine Walter Tools inserts through Metav Werkzeuge or request tailored advice from our consultants. CCGT060201M-FP2 WEP10C indexable insert – Walter Tools (FP2 chipbreaker, rhombic 80°) The CCGT060201M-FP2 WEP10C is a rhombic 80° cermet insert designed for turning and boring applications, offering FP2 chip control and a 7° relief angle for controlled cutting action FP2 chipbreaker for reliable chip control Cermet grade WEP10C for wear resistance Rhombic 80° geometry for flexible clamping 7° relief and 0.1 mm corner radius Consistent chip control and economical cutting performance The insert is engineered for predictable material removal and reduced secondary operations. With the FP2 chipbreaker and WEP10C cermet grade, the geometry supports stable chip formation and an improved surface finish, which together can reduce downtime for tool changes. The combination of a hard cermet substrate and optimised chip evacuation helps to extend usable life under steady cutting conditions. Material suitability must be verified in the product matrix before application to ensure the chosen grade matches the workpiece and cutting data. Geometry that balances strength and finishing capability The rhombic 80° shape with a 7° relief angle and a 0.1 mm corner radius provides a compromise between edge strength and fine finishing. The rhombic format allows versatile clamping options and straightforward indexing, while the modest corner radius supports good surface quality on finishing passes without sacrificing edge robustness. The tolerance class G, size code 06 and thickness designation 02 indicate a precision-manufactured insert that aligns with standard toolholder interfaces and repeatable positioning in modular tool systems. Selection guidance and application notes for reliable results Selection should prioritise the correct grade and geometry for the intended operation; the Walter Cermet series offers consistent manufacturing quality but requires matching against cutting speeds, feeds and workpiece material. The series description highlights cermet benefits for wear resistance and surface integrity, yet actual performance depends on machine rigidity and cutting data. Consult the product matrix for compatibility and consider trial cuts under production conditions. For technical clarification or specification sheets, Metav Werkzeuge provides application support and cutting-data recommendations. Contact Metav Werkzeuge for application-specific recommendations and to order genuine Walter Tools inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: CCGT060201M-FP2-WEP10C-WALTER Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Designation: CCGT060201M-FP2 WEP10C Manufacturer: Walter Tools Core data Relief angle: 7° Corner radius: 0.1 mm Insert shape: Rhombic 80° Size code: 06 Thickness code: 02 Chipbreaker: FP2 Tolerance class: G Special features Grade: WEP10C (Cermet) Series: Walter Cermet Execution: T Designation without grade: CCGT060201M-FP2 Material: catalogue-dependent Sorteneinsatz advice: check product matrix for material suitability FAQ What materials is this cermet grade intended for? The WEP10C cermet is part of the Walter Cermet series; suitability depends on the specific workpiece and cutting data, so check the product matrix to confirm whether the grade meets the required material and operation. Is the insert suitable for finishing operations? With a 0.1 mm corner radius and rhombic 80° geometry, the insert can deliver good surface quality in finishing passes when combined with appropriate feeds and speeds and a rigid setup. How does the FP2 chipbreaker affect machining? The FP2 chipbreaker is designed to promote consistent chip formation and evacuation, improving process stability and helping to reduce the likelihood of built-up edge under compatible cutting conditions. Which toolholders are compatible with this insert designation? The designation and size code align with common indexable insert toolholders for rhombic 80° inserts; verify holder compatibility by matching the insert geometry and clamping style to the toolholder specifications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
CCGT060202-FL2 WPP20G FL2 Wendeplatten - Walter Tools
Take advantage of the combination of consistent edge life, controlled chip formation and broad suitability for steel to improve turning productivity; order directly via Metav Werkzeuge or request individual cutting data from our consultants. CCGT060202-FL2 WPP20G Walter Tools — indexable turning insert with Tiger·tec Gold, Rhombus 80° and 7° clearance The CCGT060202-FL2 WPP20G is an indexable turning insert designed for general steel turning (ISO P), offering a balanced grade for versatile performance across finishing and medium machining tasks. Tiger·tec Gold coating for consistent edge life Suitable for ISO P steels and general steel turning Rhombus 80° shape with 0.2 mm corner radius 7° clearance and FL2 chipbreaker for controlled chips Greater process security through a modern coating grade The combination of the Tiger·tec Gold series and the WPP20G grade provides a measurable advantage when machining steels: improved wear resistance and stable cutting-edge behaviour reduce unplanned tool changes and interruptions. The coated cemented carbide formula is tailored to the thermal and metallurgical characteristics of ISO P materials, meaning the insert sustains cutting performance under typical heat generation. This results in a more predictable tool life and fewer machining deviations, which supports higher first-pass yields and more reliable production planning. Consistent surface quality and reliable chip control The Rhombus 80° geometry with a 0.2 mm corner radius delivers a favourable cutting approach for achieving fine surface finishes and dimensional consistency on turned components. The FL2 chipbreaker is engineered to produce short, manageable chips during common steel operations, lowering the risk of entanglement and improving workplace safety. Together with the 7° clearance, this geometry combination reduces rubbing and promotes stable contact conditions at the cutting edge, translating into fewer rework cycles and better downstream assembly fit. Productivity gains from a balanced, versatile insert Designed as an economical all-rounder for steel machining, this insert offers a compromise between toughness and wear resistance that suits mixed-production environments. The grade allocation emphasises versatility: wear resistance for longer runs and sufficient toughness to withstand intermittent higher loads. By selecting this insert, workshops benefit from reduced tooling complexity—fewer different grades are required across varying job types—while maintaining consistent performance and acceptable edge life under standard cutting parameters. Practical guidance for integration and handling The insert is supplied in the standard ISO designation and fits holders designed for CCGT-style inserts; use the code from the marking to confirm seating and clamping. For optimum results, pair the insert with a toolholder that secures a 80° rhombic seat and allows the specified clearance angle. The material allocation indicates clear suitability for steel (ISO P); when switching to markedly different alloys, a review of cutting data and possibly an alternative grade should be considered. For application-specific recommendations or cutting parameter sheets, technical assistance is available to ensure efficient ramp-up and repeatable results. Contact Metav Werkzeuge for tailored advice on the Walter Tools Tiger·tec Gold CCGT060202-FL2 WPP20G insert and to request recommended cutting data or sample allocations via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: CCGT060202-FL2-WPP20G-WALTER SKU: CCGT060202-FL2-WPP20G-WALTER Designation: CCGT060202-FL2 WPP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP20G Material group: P (steel) Shape: Rhombus 80° Chipbreaker: FL2 Clearance angle: 7° Corner radius: 0.2 mm Size code: 06 Thickness code: 02 Execution: T Tolerance class: G Core data Corner radius: 0.2 mm Clearance angle: 7° Size code: 06 Thickness code: 02 Tolerance class: G Special features Tiger·tec Gold coating technology WPP20G coated cemented carbide grade FL2 chipbreaker for controlled chips Suitable for ISO P steels Rhombus 80° plate form Execution T FAQ What materials is this insert intended for? The CCGT060202-FL2 WPP20G insert is specified for steel machining (ISO P); the grade and coating are balanced for unalloyed and alloyed steels. How does the FL2 chipbreaker affect production? The FL2 chipbreaker on the insert promotes short, controlled chips during turning, which improves chip evacuation and reduces interruptions on standard steel turning operations. What surface quality can be expected with the 0.2 mm corner radius? A 0.2 mm corner radius combined with the Rhombus 80° geometry helps achieve fine surface finishes and consistent dimensional control on turned components. Is the insert compatible with common CCGT toolholders? Yes, the ISO designation corresponds to holders for CCGT-type indexable inserts; verification of seat and clamping geometry is recommended before mounting. Can this insert be used for medium-duty roughing as well as finishing? The WPP20G grade is designed as a versatile option for a range of steel turning tasks, offering a compromise between wear resistance and toughness suitable for many finishing and medium-cut scenarios. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is an original factory-new product of the manufacturer Walter Tools.
CCGT060202-FL2 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger‑tec Silver coating and the WSM01 grade for secure chip formation and extended edge life in demanding materials, while the rhombic geometry and FL2 chipbreaker ensure consistent surface quality; order the CCGT060202-FL2 WSM01 insert directly via Metav Werkzeuge or consult our specialists for application support. CCGT060202-FL2 WSM01 indexable turning insert, Rhombic 80° geometry, 7° clearance — Walter Tools A CCGT060202-FL2 WSM01 indexable turning insert engineered for machining stainless steels and heat‑resistant alloys with reliable chip control and robust edge stability Tiger‑tec Silver coated grade WSM01 Rhombic 80° insert geometry 7° clearance angle for secure cutting 0.2 mm corner radius for fine surface finishes FL2 chipbreaker optimised for tough alloys Consistent cutting in hard‑to‑machine materials for reliable productivity The insert combines the Tiger‑tec Silver coating with the WSM01 coated carbide grade to tackle materials where heat and adhesion challenge the tool life. Designed for the ISO material groups M and S, this grade supports machining of stainless steels and heat‑resistant superalloys by improving chip control and reducing the tendency for built‑up edge. The result is a stable cutting edge that prolongs tool life and keeps component quality consistent across production batches, helping to reduce downtime and rework. Geometry and edge preparation that improve surface quality and process stability The Rhombic 80° form and a clearance angle of 7° combine to deliver controlled cutting forces and reduced vibration during turning operations. A 0.2 mm corner radius produces a fine surface finish without sacrificing edge strength, while the FL2 chipbreaker is tailored for secure chip formation in sticky or gummy workpiece materials. Together these features help maintain repeatable results on the shop floor and simplify the selection of cutting strategies for semi‑finishing and finishing passes. Practical benefits on the shop floor: interchangeability, repeatability and predictable tool life As an indexable insert, the CCGT060202-FL2 WSM01 offers quick seat replacement and consistent orientation, which shortens changeover times and supports lean production. The specified tolerance class G and the standardised insert size 06 and thickness 02 ensure compatibility with many toolholders and fixtures, while the optimised grade and coating aim to deliver consistent edge life across different batches. For operations seeking process reliability when machining demanding alloys, this combination minimises unexpected wear and contributes to measurable productivity gains. Discuss application parameters and optimise insert selection with Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com to determine the best setup for Walter Tools Tiger‑tec Silver WSM01 inserts Technical data Article number: CCGT060202-FL2-WSM01-WALTER Manufacturer: Walter Tools Product type: Indexable turning insert (drehwendeschneidplatte) Series: Tiger‑tec Silver Grade: WSM01 Chipbreaker: FL2 Numbers / Core technical data Insert form: Rhombic 80° Clearance angle: 7° Corner radius: 0.2 mm Insert size: 06 Thickness: 02 Tolerance class: G Execution: T SKU: CCGT060202-FL2-WSM01-WALTER Special features / Applications Coated carbide grade for tough materials Optimised for ISO groups M and S (stainless steels, superalloys/titanium depending on geometry) FL2 chipbreaker for secure chip formation Suitable for semi‑finishing and finishing operations where edge stability is critical FAQ Is this insert suitable for machining stainless steels? Yes. The CCGT060202-FL2 WSM01 by Walter Tools is developed for ISO group M materials and provides chip control and edge stability tailored to stainless steels. Can the insert be used on superalloys and titanium? The WSM01 grade and the FL2 chipbreaker are intended for difficult‑to‑machine materials; depending on the holder, cutting data and geometry the insert can be applied to heat‑resistant superalloys and some titanium applications. What does the 0.2 mm corner radius mean for surface finish? A 0.2 mm radius gives a good compromise between edge strength and surface quality, reducing the risk of chipping while enabling fine finishes on turned components. How does the FL2 chipbreaker help in production? The FL2 geometry is designed to form compact, controlled chips in sticky or work‑hardening materials, reducing build‑up and making chip evacuation more predictable during continuous runs. Which toolholders fit this insert size and form? This rhombic 80° insert in size 06 and thickness 02 is compatible with standard holders that accept CCGT‑style inserts; check holder manufacturer specifications for seat and clamping compatibility. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named manufacturers. The offered article is original, brand‑new goods from the manufacturer.
CCGT060202-FM2 WMP20G T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and an FM2 chipbreaker for consistent chip control and extended tool life when machining stainless steel; the rhombic 80° geometry with a 0.2 mm corner radius and 7° clearance ensures reliable performance in medium to robust conditions. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. CCGT060202-FM2 WMP20G — Rhombic 80° indexable insert by Walter Tools, optimised for stainless steel The CCGT060202-FM2 WMP20G is a rhombic 80° indexable insert for boring and turning operations, designed to provide stable cutting performance when machining stainless steel under medium to robust conditions. Tiger‑tec Gold coating for improved tool life Optimised for machining stainless steel FM2 chipbreaker for secure chip control Rhombic 80° form, 0.2 mm corner radius Process reliability through coating and chip control The combination of the Tiger‑tec Gold coating and the WMP20G grade ensures improved wear resistance and consistent cutting-edge integrity when facing the challenges of stainless steel—materials that tend to work-harden and produce built-up edge. The insert’s FM2 chipbreaker promotes predictable chip formation, reducing the risk of clogging and tool damage; this leads to more stable machining cycles and less unscheduled downtime. Using a coated grade tailored for such alloys results in longer in‑machine life and a more reliable surface finish, which supports higher throughput and lower overall process costs. Efficient machining and repeatable surface quality Geometry influences productivity. The rhombic 80° form combined with a 0.2 mm corner radius delivers a balance between robustness and finish quality: the shape resists edge chipping while enabling a smooth cutting action for fine to moderate feeds. The 7° clearance angle reduces rubbing on the flank, lowering heat generation and improving consistency across passes. For operations requiring predictable outcomes—such as serial production or finishing steps—this insert offers measurable advantages in cycle stability and reduced rework, converting technical performance into economic benefit. Practical compatibility and application guidance Specified as suitable for stainless steel, the grade classification M indicates the insert is intended for alloys that demand secure chip evacuation and strong edge retention. The insert’s CCGT060202-FM2 designation corresponds to standard industry sizing and seat fitment, making it straightforward to integrate into existing toolholders that accept rhombic 80° turning/bore plates. The FM2 chipbreaker is especially helpful when cutting tougher stainless variants, while the Tiger‑tec Gold coating supports operation at elevated temperatures. For machining strategies, pairing the insert with stable tooling and appropriate coolant flow enhances the benefits of its design. Contact Metav Werkzeuge for expert application advice and to select the right Walter Tools CCGT060202-FM2 WMP20G insert for specific stainless steel processes Technical Data Article number: CCGT060202-FM2-WMP20G-WALTER Article designation: CCGT060202-FM2 WMP20G Product type: Boring/turning indexable insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Core specifications Corner radius: 0.2 mm Clearance angle: 7° Insert form: Rhombic 80° Insert size: 06 Thickness: 02 Tolerance class: G Materials & special features Grade: WMP20G Chipbreaker: FM2 Suitable for: stainless steel Coating technology: Tiger‑tec Gold Execution: T FAQ What materials is this insert intended for? The CCGT060202-FM2 WMP20G is specified for stainless steel applications; the WMP20G grade and Tiger‑tec Gold coating support secure chip formation and edge stability in such alloys. How does the FM2 chipbreaker affect machining? The FM2 chipbreaker included with this insert promotes controllable chip shapes and evacuation, which reduces the risk of built‑up edge and improves process reliability during turning and boring operations. Can the insert be used for finishing stainless steel surfaces? Yes, the rhombic 80° geometry with a 0.2 mm corner radius offers a balance between robustness and surface quality, making the insert suitable for many finishing and semi-finishing tasks on stainless steel. Is the coating beneficial for higher cutting speeds? The Tiger‑tec Gold coating enhances wear resistance and thermal stability, allowing for improved performance at elevated cutting temperatures typically encountered when machining stainless steel. What seating and toolholder type is required? The designation corresponds to standard rhombic 80° indexable inserts; the CCGT060202-FM2 fits holders designed for that ISO geometry and size—ensure the holder matches the insert’s size and clamping method for optimal results. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCGT060202-FM2 WSM01 Wendeplatten - Walter Tools
Take advantage of the proven combination of the Tiger‑tec Silver coating, a robust WSM01 carbide grade and the FM2 chipbreaker for consistent chip control in demanding materials; this results in reliable process security and longer tool life. Order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. CCGT060202-FM2 WSM01 — Indexable turning insert, Tiger‑tec Silver (Walter Tools) A CCGT060202-FM2 WSM01 indexable turning insert engineered for stable machining of stainless steels and heat‑resistant superalloys in demanding production environments Tiger‑tec Silver coated carbide Optimised chip control FM2 Rhombic 80° geometry Consistent cutting performance in tough alloys The coated carbide Tiger‑tec Silver and the dedicated WSM01 grade deliver a balance between wear resistance and edge stability when machining stainless steels and heat‑resistant superalloys. The result is a reduced tendency for built‑up edge and more predictable tool life under thermal stress. By combining a heat‑resistant coating with a grade tailored for tough materials, the insert supports a stable cutting process and helps maintain component tolerances across batch production. Geometry that improves process reliability The Rhombic 80° shape with a 7° clearance angle and a 0.2 mm corner radius produces a versatile cutting profile that is suited to medium‑to‑fine finishing and interrupted cuts. The thin profile (designation 06 / thickness 02) and the FM2 chipbreaker are designed to control chip formation and evacuation, reducing the risk of entanglement and enhancing surface quality. These geometric choices translate into fewer machining interruptions and greater consistency in series production. Operational benefits for productivity and economy Using the FM2 chipbreaker together with the coated carbide technology results in improved chip control and lower cutting forces in many applications, which can extend the usable life of the toolholder assembly and reduce downtime for insert changes. This practical combination supports higher process reliability and contributes to a favourable cost‑per‑part ratio when machining difficult‑to‑cut materials. Compatibility and application guidance The insert is classified for machining material groups M (stainless steels) and S (heat‑resistant superalloys and titanium) according to ISO categorisation. The WSM01 grade is suitable where thermal resistance and a stable cutting edge are required. For specific machine settings and optimal performance windows, consult the tooling recommendations from Walter Tools or contact Metav Werkzeuge for tailored application advice and matching toolholders. Contact Metav Werkzeuge for personalised application support, availability and guidance on integrating the CCGT060202-FM2 WSM01 insert into existing machining processes Technical data Article number: CCGT060202-FM2-WSM01-WALTER Designation: CCGT060202-FM2 WSM01 Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.2 mm Insert size: 06 Thickness: 02 Tolerance class: G Special features Series: Tiger‑tec Silver Grade: WSM01 Chipbreaker: FM2 Plate form: Rhombus 80° Material suitability: stainless steels; heat‑resistant alloys FAQ Which materials is this insert suitable for? The CCGT060202-FM2 WSM01 insert from Walter Tools is designed for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering enhanced edge stability and thermal resistance. What advantages does the FM2 chipbreaker provide? The FM2 chipbreaker on the WSM01 grade supports predictable chip formation and improved evacuation when cutting tough materials, which helps maintain surface finish and reduces machine stoppages. Can the insert be used for finishing and semi‑finishing operations? Yes; the Rhombic 80° geometry with a 0.2 mm corner radius is appropriate for medium to fine finishing, while also handling many semi‑finishing tasks when combined with suitable cutting parameters. How does the Tiger‑tec Silver coating affect performance? The Tiger‑tec Silver coating increases heat resistance and wear performance on coated carbide grades, improving tool life and process security under elevated temperatures typical for stainless steels and superalloys. Where to get application support and matching toolholders? Metav Werkzeuge can advise on matching toolholders, clamping systems and cutting data for the CCGT060202-FM2 WSM01 insert to ensure optimal integration into the production process. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCGT060202-FM2 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger‑tec Silver coating and the WSM20S carbide grade for stable cutting in stainless steel and heat‑resistant alloys; the Rhombus 80° form with a 0.2 mm corner radius ensures repeatable surface quality while the FM2 chipbreaker supports secure chip control — order directly via Metav Werkzeuge or consult the Metav team for process optimisation. CCGT060202-FM2 WSM20S – Rhombus 80° indexable insert for stainless steel and superalloys, Walter Tools The CCGT060202-FM2 WSM20S is an indexable turning and boring insert engineered for reliable chip control and edge stability when machining stainless steel and heat‑resistant superalloys in production environments. Tiger‑tec Silver wear resistance WSM20S grade for tough materials Rhombus 80° geometry for versatility FM2 chipbreaker for consistent chips Optimised coating and grade for demanding materials The combination of the Tiger‑tec Silver coating and the WSM20S carbides provides high thermal stability and improved wear resistance for long series runs. This metallurgical pairing reduces flank wear and supports a stable cutting edge, which translates into fewer interruptions and longer tool life. For production planners this means higher machine utilisation and more consistent batch results when working with stainless steel or heat‑resistant alloys, because the grade is designed to manage heat build‑up and resist abrasive conditions that typically shorten conventional insert life. Geometry that secures process reliability and surface finish The Rhombus 80° insert geometry combined with a 0.2 mm corner radius and a modest 7° clearance creates a robust cutting geometry that balances strength and accessibility. The result is reliable load distribution on the cutting edge and improved resistance to chipping during interrupted cuts. The FM2 chipbreaker promotes controlled chip formation, reducing the risk of built‑up edge and improving surface finish, which is particularly important for finishing passes and when consistent part quality is required across batches. Practical benefits for workshop productivity As an indexable insert designed for turning and boring tasks, the component supports quick seat changes and predictable tool life, simplifying tool inventory management and reducing downtime. The insert’s form and chip control features contribute to easier process parameter selection and fewer rejected parts, which improves overall cost efficiency. In combination with appropriate cutting data, the insert helps maintain dimensional stability and aids in achieving repeatable results in small to medium series production. Suitable applications and material guidance This insert is intended mainly for stainless steel and for heat‑resistant superalloys and titanium where elevated cutting temperatures and tenacious material behaviour demand a wear‑resistant grade. The WSM20S grade is optimised for these workpiece groups and supports safe chip formation under high thermal loads. For best results, pair the insert with suitable coolant and machine settings adapted to the specific alloy and operation type to balance tool life and productivity. Contact Metav Werkzeuge for tailored cutting data or process advice on Walter Tools inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for a specific application Technical data Article number: CCGT060202-FM2-WSM20S-WALTER SKU: CCGT060202-FM2-WSM20S-WALTER Series: Tiger‑tec Silver Grade: WSM20S Brand: Walter Tools Facts Corner radius: 0.2 mm Clearance angle: 7° Plate form: Rhombus 80° Plate size: 06 Plate thickness: 02 Special features Chipbreaker: FM2 Material suitability: S / M (stainless steel; heat‑resistant superalloys and titanium) Execution: T Tolerance class: G ISO designation: CCGT060202-FM2 WSM20S Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte FAQ What materials is this insert best suited for? The CCGT060202-FM2 WSM20S insert is designed for stainless steel and for heat‑resistant superalloys and titanium where high thermal loads and tenacity require a wear‑resistant grade. How does the Tiger‑tec Silver coating affect performance? The Tiger‑tec Silver coating on the WSM20S grade increases thermal stability and wear resistance, extending the cutting life and supporting consistent edge integrity during longer runs. Which chipbreaker should be selected for mixed turning and finishing? The integrated FM2 chipbreaker on this insert promotes controlled chips across roughing and finishing operations, aiding surface quality and reducing the risk of built‑up edge with challenging materials. Can the insert geometry handle interrupted cuts? Yes, the Rhombus 80° form with a 0.2 mm corner radius and 7° clearance increases edge robustness and helps tolerate intermittent cutting forces encountered in interrupted cut situations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanation. There is no affiliation between our company and the mentioned manufacturers. The offered item is an original, factory‑new product of the manufacturer.
CCGT060202-FN2 WN10 T Wendeplatten - Walter Tools
Taking advantage of the combination of precise geometry and reliable chip control helps to maintain stable production processes and consistent surface quality; the uncoated carbide grade and FN2 chipbreaker support productive machining. Order the insert directly via Metav Werkzeuge or ask the consultants for application-specific advice. CCGT060202-FN2 WN10 rhombic 80° indexable insert with FN2 chipbreaker by Walter Tools A CCGT060202-FN2 WN10 indexable insert engineered for drilling and turning applications, offering a 0.2 mm corner radius and a 7° relief angle for controlled engagement Rhombic 80° geometry for versatile indexing FN2 chipbreaker for reliable chip control 0.2 mm corner radius for fine finishing 7° relief angle for consistent cutting engagement Geometry that ensures predictable cutting performance The rhombic 80° geometry of this insert is designed to deliver repeatable cutting conditions across a variety of operations. The compact shape supports secure clamping in standard toolholders while enabling multiple indexing positions, which reduces tool change frequency and machine downtime. Combined with the 0.2 mm corner radius, the geometry promotes a stable cutting edge that helps achieve consistent surface finish and dimensional accuracy on turned and bored features. Chip formation and material interaction for steady machining Equipped with the FN2 chipbreaker, the insert is optimised for effective chip control in medium to light cutting conditions, assisting in uninterrupted swarf evacuation and reducing the risk of built-up edge. The grade is specified as uncoated carbide (Walter Schneidstoffsorte WN10 – uncoated hard metal), which provides a straightforward, economical solution where coated grades are not required. This configuration supports predictable tool wear and facilitates consistent cuts when matched with appropriate cutting parameters. Practical benefits for workshop productivity The insert’s 7° relief angle and standardised dimensions (06 size, thickness 02) simplify process planning and tool inventory management. Its tolerance class G indicates reliable dimensional conformity for repeatable mounting and indexing. By choosing this insert, workshops gain a balance of low-complexity tooling and dependable performance for general turning and boring tasks, making it suitable for production environments where stability and straightforward application are priorities. Contact Metav Werkzeuge for tailored application guidance and to place an order: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number / SKU: CCGT060202-FN2-WN10-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCGT060202-FN2 WN10 Walter Tools Standard designation: CCGT060202-FN2 WN10 Core specifications Insert shape: Rhombus 80° Size / designation: 06 Thickness: 02 Corner radius: 0.2 mm Relief angle: 7° Chipbreaker: FN2 Tolerance class: G Materials and features Cutting material: uncoated carbide (WN10) Series: Walter Schneidstoffsorte - Serie offen Execution: T Application note: Check material suitability against product matrix Labelled for drilling and turning indexable insert applications FAQ What materials is this insert intended for? The CCGT060202-FN2 WN10 insert is supplied in an uncoated carbide grade; material suitability should be verified against the Walter Tools product matrix for the specific workpiece material. Does the insert require a coated grade for tougher applications? For higher demands or abrasive materials, a coated grade may be preferred; the WN10 uncoated variant offers economical performance for many general turning and boring operations. How does the FN2 chipbreaker influence machining stability? The FN2 chipbreaker on the CCGT060202-FN2 WN10 promotes controlled chip formation and evacuation, supporting steady machining and reduced risk of chip entanglement. Is the insert compatible with standard toolholders for CCGT geometry? Yes, the rhombic 80° form and standard size designation are suitable for conventional toolholders designed for CCGT-style indexable inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand-new goods from the manufacturer Walter Tools.
CCGT060202-FN2 WNN10 Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide grade WNN10, precise rhombic 80° geometry and the controlled-chip performance of the FN2 chipbreaker to achieve consistent turning results and reduced tool-change downtime. Order the inserts via Metav Werkzeuge or consult the technical team for application-specific recommendations. CCGT060202-FN2 WNN10 — Turning/boring indexable insert, coated carbide, FN2 chipbreaker — Walter Tools The CCGT060202-FN2 WNN10 is an indexable turning and boring insert designed for stable performance in coated carbide grades, suitable for a wide range of general turning operations where repeatable chip control and robust edge performance are required Coated carbide grade WNN10 Rhombic 80° insert geometry 0.2 mm corner radius 7° clearance angle FN2 chipbreaker for reliable chip control Consistent chip control that raises productivity The combination of a coated carbide substrate and the dedicated FN2 chipbreaker provides reliable chip formation under varying cutting conditions. This engineered chip control reduces the risk of entanglement and improves evacuation, which in turn lowers the likelihood of workpiece damage and shortens cycle times. The result is measurable productivity gains: fewer interruptions for chip clearing and a more stable cutting process. Where cutting conditions vary, the WNN10 grade gives a predictable edge life; however, workpiece compatibility should be verified against the manufacturer’s product matrix to ensure optimal results. Geometry that secures repeatable surface quality The rhombic 80° geometry combined with a 0.2 mm corner radius and a 7° clearance angle creates a balance between strength and cutting reliability. The acute geometry supports access to a wide range of turning profiles while the modest corner radius helps to maintain a consistent surface finish without imposing excessive cutting forces. Tolerance class G indicates consistent dimensional accuracy for interchangeability in standard ISO CCGT seats. These geometric features together help to reduce rework and to sustain process stability over longer production runs. Grade selection and application guidance for safe integration The insert is supplied in the Walter WNN10 coated carbide series, a versatile option within the Walter grade family intended for general turning tasks. It is recommended to consult the product matrix when choosing this grade for a specific material to confirm cutting data and coolant strategy. The insert’s designation follows ISO conventions for CCGT-style parts, facilitating installation in compatible toolholders and making replacement straightforward during routine maintenance. For special requirements or unfamiliar materials, technical advice is available to align cutting parameters with the tool’s capabilities. Discuss the suitability of Walter Tools WNN10 inserts with Metav Werkzeuge and request a tailored recommendation via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 to ensure the best fit for the intended turning application Technical Data Article number: CCGT060202-FN2-WNN10-WALTER Article designation: CCGT060202-FN2 WNN10 Manufacturer: Walter Tools Product type: Turning / drilling indexable insert Grade / series: WNN10 Geometry: Rhombic 80° Chipbreaker: FN2 Core dimensions Clearance angle: 7° Corner radius: 0.2 mm Insert size: 06 Thickness designation: 02 Tolerance class: G Special features Coated carbide (beschichtetes Hartmetall) Walter grade series – open series Execution: T ISO designation: CCGT FAQ What kind of turning tasks suit this insert? The CCGT060202-FN2 WNN10 insert is intended for general turning and boring operations where controlled chips and stable tool life are priorities; compatibility with specific materials should be checked in the product matrix. How does the FN2 chipbreaker influence performance? The FN2 chipbreaker on the WNN10 grade promotes predictable chip segmentation and evacuation, reducing the need for manual chip clearing and supporting uninterrupted production cycles. Will this insert fit standard CCGT toolholders? Yes, the CCGT designation indicates conformity with ISO CCGT geometry, so the insert is compatible with toolholders designed for CCGT inserts when the seat and clamping match the specification. What effect does a 0.2 mm corner radius have on surface finish? A 0.2 mm corner radius provides a balance between edge strength and finish: it helps deliver a consistent surface quality while limiting cutting forces, particularly on medium-duty turning operations. Is WNN10 suitable for hardened materials? WNN10 is a coated carbide grade; suitability for hardened or specific alloyed materials must be verified against the manufacturer’s application matrix to determine appropriate cutting data and expected tool life. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCGT060202-MN2 WN10 Wendeplatten - Walter Tools
Take advantage of the combination of durable geometry and cost-efficient uncoated carbide for predictable machining results; the insert’s rhombic 80° form and 0.2 mm corner radius support fine surface finish and controlled chip flow. Order the CCGT060202-MN2 WN10 inserts via Metav Werkzeuge or consult the sales team for application guidance. CCGT060202-MN2 WN10 – Turning/boring indexable insert, Rhombic 80°, 0.2 mm (Walter Tools) A CCGT060202-MN2 WN10 indexable insert designed for turning and boring applications, offering a compact rhombic geometry and a dedicated chipbreaker for stable machining. Uncoated cemented carbide WN10 Rhombic 80° geometry for versatile turning 0.2 mm corner radius for fine surface quality Chipbreaker MN2 for controlled chip formation Consistent cutting geometry for repeatable results The rhombic 80° shape combined with a 0.2 mm corner radius produces a balance between edge strength and the capacity to generate a fine surface finish. The insert’s 7° clearance supports reliable engagement with the workpiece while reducing the likelihood of rubbing at the flank, which helps to maintain consistent part tolerances. Thanks to the defined form and tolerance class G, the insert guarantees repeatable seating in compatible toolholders, so setup variance is minimised and cycle-to-cycle accuracy is improved. Uncoated carbide grade that prioritises stability The WN10 designation denotes an uncoated cemented carbide grade intended for general-purpose metalcutting; it provides stable chip formation across a broad range of operations. The absence of a surface coating simplifies regrinding options and can be advantageous where coating-driven adhesion or thermal sensitivity is a concern. For precise material suitability, consult the supplied product matrix, as the grade is designed to perform across many steel and alloy families while offering economical replacement intervals when compared with more specialised grades. Chip control and productivity in practical use Equipped with the MN2 chipbreaker, the insert focuses on taming chips in common turning and boring tasks to reduce downtime caused by chip entanglement. Controlled chip flow contributes directly to machine uptime and operator safety while helping to achieve a consistent surface finish. The compact 06 size and 02 thickness make the insert suitable for close-tolerance work and for toolholders where space and rigidity are limiting factors, enabling productive feeds and speeds without compromising repeatability. Seamless integration into existing toolsets The insert’s standard dimensions and form factor simplify interchangeability with conventional turning and boring tool systems. With the execution T and the defined geometry, the component integrates into typical insert holders and can be indexed to present a fresh cutting edge quickly. This practicality supports efficient tool inventory management and predictable tool-change intervals, which in turn help to plan production runs and reduce unplanned stoppages. For workshops seeking balance between cost and performance, the insert represents a pragmatic choice within a structured tool strategy. Contact Metav Werkzeuge for tailored application advice and to secure CCGT060202-MN2 WN10 inserts from Walter Tools for forthcoming production needs Technical data Article number: CCGT060202-MN2-WN10-WALTER SKU: CCGT060202-MN2-WN10-WALTER Designation: CCGT060202-MN2 WN10 Manufacturer: Walter Tools Product type: Turning/boring indexable insert Core specifications Clearance angle: 7° Corner radius: 0.2 mm Plate size: 06 Plate thickness: 02 Tolerance class: G Design & features Grade: WN10 (uncoated cemented carbide) Chipbreaker: MN2 Series: Walter Schneidstoffsorte - Serie offen Execution: T Material designation: Katalogabhängig Shape: Rhombus 80° Product family: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte FAQ Which materials is this insert suitable for? Material suitability should be verified against the manufacturer’s application matrix; the CCGT060202-MN2 WN10 insert is an uncoated cemented carbide grade intended for a wide range of general turning and boring tasks. What does the WN10 grade indicate? WN10 is a Walter Tools carbide grade; in this case it denotes an uncoated cemented carbide formulation designed for stable chip formation and broad workshop application—refer to the product matrix for exact material matches. How does the MN2 chipbreaker affect performance? The MN2 chipbreaker assists in producing short, controllable chips and contributes to improved surface finish and safer chip evacuation during turning and boring operations with the insert. Can the insert be used in standard toolholders? Yes. The rhombic 80° form, standard 06 size and defined tolerance class G allow the insert to be indexed and seated in conventional turning and boring holders for straightforward replacement and consistent positioning. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned only for explanation. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
CCGT060202-MN2 WNN10 WNN10 Wendeplatten - Walter Tools
Take advantage of the combination of a coated carbide grade for extended tool life and a rhombic 80° geometry for versatile turning and boring operations, ensuring consistent chip control with the MN2 breaker; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. CCGT060202-MN2 WNN10 turning and boring indexable insert by Walter Tools — rhombic 80°, MN2 chipbreaker The CCGT060202-MN2 WNN10 is a versatile indexable insert designed for turning and boring tasks, offering a coated carbide grade suited to a wide range of production applications. Coated carbide grade WNN10 for long tool life Rhombic 80° geometry for versatile turning 0.2 mm corner radius for fine surface finish MN2 chipbreaker for reliable chip control Maintain productive, repeatable machining with a wear-resistant grade The CCGT060202-MN2 WNN10 insert combines a coated carbide grade with a robust geometry to deliver high process reliability in serial production. The substrate and coating combination is optimised for stable cutting edge behaviour, which keeps tool changes predictable and reduces unplanned downtime. By choosing a grade developed for broad material coverage, shops can streamline tool inventories while maintaining consistent component quality and repeatable cycle times. Achieve superior surface quality and controlled chip formation The rhombic 80° shape paired with a 0.2 mm corner radius provides a balance between strength and finishing capability, enabling fine surface finishes with minimal vibration. The MN2 chipbreaker is engineered for orderly chip control across typical turning feeds, limiting re-cutting and improving evacuation when boring or facing. This results in fewer interruptions, improved workpiece integrity and reduced secondary operations for de‑bur and cleaning. Practical selection and application guidance for process security Designed as an indexable insert for conventional and CNC turning machines, the item features an execution code that suits standard holders and clamping systems. The open series designation means the WNN10 grade is a coated carbide intended for a variety of steels and general turning tasks; users should consult the product matrix for specific material matches. Metav Werkzeuge can provide cutting data recommendations and holder compatibility to help integrate the insert into existing processes and to maximise tool life and part quality. Contact Metav Werkzeuge for tailored recommendations on using the Walter Tools WNN10 grade and to discuss suitable holders and cutting parameters Technical data Article number: CCGT060202-MN2-WNN10-WALTER Designation: CCGT060202-MN2 WNN10 Type: Turning and boring indexable insert Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Numbers / Core technical data Clearance angle: 7° Corner radius: 0.2 mm Plate size: 06 Plate thickness: 02 Plate form: Rhombus 80° Tolerance class: G Design / Special features Grade: WNN10 (coated carbide) Chipbreaker: MN2 Execution: T Intended use: Turning and boring operations Manufacturer series: Walter Schneidstoffsorte - Serie offen FAQ What materials is this insert intended for? The CCGT060202-MN2 WNN10 insert is a coated carbide grade intended for a broad range of general turning applications; users should check the specific product matrix for optimal material matches and cutting parameters. Can the insert be used for finishing and semi‑roughing? Yes, the rhombic 80° geometry with a 0.2 mm corner radius allows for fine surface finishes while the MN2 chipbreaker supports semi‑roughing feeds with reliable chip control. How is chip control achieved with this insert? Chip control is provided by the MN2 chipbreaker design; combined with the coated carbide grade WNN10, it promotes orderly chip formation and evacuation in typical turning and boring operations. Is this insert compatible with standard toolholders? The insert follows common indexable insert dimensions and clamping conventions for its form and size; verify holder compatibility and clamping specifications before fitting into a specific toolholder. Where can cutting data and application advice be obtained? Metav Werkzeuge can supply cutting data, holder recommendations and application support for the CCGT060202-MN2 WNN10 to help integrate it into production workflows. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is among the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik group. Protected trademarks and brand names belong to their respective owners. Mark names and protected designations are cited solely for explanation; there is no affiliation between our company and the mentioned brands. The offered item is original, factory‑new merchandise from the manufacturer.
CCGT060202-MN2 WSM01 MN2 Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, reliable chip control and compatibility with demanding alloys to maintain steady production. Order the insert directly via Metav Werkzeuge or consult the Metav team for application-specific selection and cutting data. CCGT060202-MN2 WSM01 — Indexable insert (Tiger‑tec Silver) by Walter Tools The CCGT060202-MN2 WSM01 is an indexable insert engineered for drilling, boring and turning tasks, optimised for machining heat‑resistant alloys and stainless steel. Tiger‑tec Silver coating for high wear resistance WSM01 grade for heat‑resistant alloys and stainless steel Rhombic 80° form with 0.2 mm corner radius MN2 chipbreaker for controlled chip formation Longer tool life through advanced coating and grade The combination of the Tiger‑tec Silver coating and the WSM01 coated‑carbide grade delivers improved resistance to abrasion and thermal loading, which extends tool life in continuous production. For applications involving tough, heat‑retaining materials, a hardened coating reduces friction and supports a stable cutting edge, resulting in fewer unplanned tool changes and more predictable spindle time. This translates into measurable process reliability and reduced cost per part. Consistent chip control and improved surface finish The MN2 chipbreaker geometry together with a 0.2 mm corner radius produces predictable chip forms when machining sticky or work‑hardening materials. Controlled chip evacuation reduces the risk of built‑up edge and supports consistent part quality. The rhombic 80° insert shape offers versatile approach angles for turning and boring, enabling good surface integrity without compromising cutting stability. Designed for production efficiency and easy integration As an indexable insert with a standard designation, the component integrates into common clamping systems to shorten tool change times and simplify inventory management. The 7° clearance offers effective relief at the cutting zone, balancing edge strength with reduced rubbing. Using a standard size and form helps maintain high machine uptime and supports predictable cycle times across mixed production batches. Suited materials and recommended use cases The grade is specifically tailored for machining stainless steel and hard‑to‑cut materials such as heat‑resistant superalloys and titanium (ISO groups M and S). The coated carbide substrate and the Tiger‑tec Silver series are aimed at applications where thermal stability and edge retention are critical, for instance aerospace component finishing, medical implant pre‑machining and heavy stainless‑steel workpieces. Selection of cutting parameters should favour moderate to stable feeds with attention to coolant strategy for best results. Contact Metav Werkzeuge for tailored grade selection and cutting data for Walter Tools inserts or request an application review via info@metav-werkzeuge.com Technical Data Article number: CCGT060202-MN2-WSM01-WALTER Designation: CCGT060202-MN2 WSM01 Product type: Indexable insert for drilling/boring and turning Manufacturer: Walter Tools (Walter Deutschland GmbH) Core specifications Clearance angle: 7° Corner radius: 0.2 mm Insert form: Rhombic 80° Size code: 06 Chipbreaker: MN2 Thickness code: 02 Tolerance class: G Materials & special features Series: Tiger‑tec Silver Grade: WSM01 (coated carbide) Suitable for: stainless steel (ISO M) and heat‑resistant superalloys/titanium (ISO S) Application focus: heavy duty and hard‑to‑machine materials Chip control: MN2 geometry FAQ What materials are best processed with this insert? The CCGT060202‑MN2 WSM01 insert is formulated for stainless steel and heat‑resistant alloys (ISO groups M and S), providing thermal stability and edge retention for challenging workpieces. How does the MN2 chipbreaker affect machining? The MN2 geometry delivers controlled chip formation and evacuation, which reduces built‑up edge and supports consistent surface finish when using the WSM01 grade. Is the insert suitable for both drilling and turning operations? Yes; the insert’s rhombic 80° form and standard designation enable use in drilling/boring and turning toolholders where the form and size are compatible. What benefit does the Tiger‑tec Silver series provide? The Tiger‑tec Silver coating improves wear resistance and reduces heat transfer to the cutting edge, extending tool life and stabilising performance under higher thermal loads. What should be considered when selecting cutting data for this grade? For WSM01, prioritise stable feeds and an appropriate coolant strategy for stainless steel and superalloys; the coating and grade support edge retention but require consistent cutting conditions for optimal life. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCGT060202-X15 WAK15 Wendeplatten - Walter Tools
Take advantage of a sharp, uncoated carbide grade and a dedicated chipbreaker to achieve clean drilling and bore finishing in aluminium and other non‑ferrous metals; the compact rhombic geometry with a 7° clearance ensures reliable chip control and repeatable surface quality. Order directly via Metav Werkzeuge or consult our specialists for cutting data and grade selection. CCGT060202-X15 WAK15 drilling/reaming indexable insert by Walter Tools — Rhombic 80°, 7° clearance The CCGT060202-X15 WAK15 is an uncoated carbide insert designed for efficient drilling and bore‑finishing of aluminium and non‑ferrous alloys, offering a sharp cutting edge and a dedicated X15 chipbreaker. Uncoated carbide for aluminium machining Rhombic 80° insert form for tight bore geometries 7° clearance angle for low friction cutting Precision and productivity for aluminium machining The CCGT060202‑X15 WAK15 insert combines a sharp cutting edge with an optimised X15 chipbreaker to reduce built‑up edge and promote consistent chip evacuation when machining aluminium and similar materials. The result is improved cycle times through fewer interruptions for chip cleaning and less time spent on rework due to surface defects. The uncoated carbide grade provides the necessary edge acuity for soft, adhesive materials, while the rhombic geometry supports stable engagement in constrained bores. Geometry that supports consistent surface finish Featuring a rhombic 80° shape with a 0.2 mm corner radius and 7° clearance, this insert offers a balance between edge strength and finish quality. The small corner radius is ideal for producing fine bore edges without excessive tool pressure, lowering the risk of chatter in high‑speed operations. These design choices translate into repeatable surface quality and predictable tool life in serial production of non‑ferrous components. Ease of integration and reliable handling The insert’s designation and standard form make it straightforward to specify as a replacement part in many drill and reamer tool bodies that accept CCGT inserts. The compact 06 size and 02 thickness allow installation in restricted toolholders where minimal overhang and precise positioning are essential. With the Walter N‑grade lineage, the insert is intended for industrial applications that prioritise stable chip formation and dependable process behaviour. Practical benefits for workshop and production planning Using an insert optimised for aluminium reduces the need for special coatings while delivering low friction performance; this simplifies inventory choices and can lower tooling expenditure over multiple orders. The robust geometry and clear grade indication support predictable scheduling of tool changes and maintenance, aiding planners and operators who require a stable machining process without frequent adjustments. Contact Metav Werkzeuge to confirm suitability for specific machines and request cutting data for the Walter Tools CCGT060202‑X15 WAK15 insert Technical data Article number: CCGT060202-X15-WAK15-WALTER Description: CCGT060202-X15 WAK15 Brand: Walter Tools Series: Walter N‑Sortensystem Grade: WAK15 Execution: T Tolerance class: G Core data Insert size: 06 Thickness: 02 (mm) Corner radius: 0.2 mm Clearance angle: 7° Insert form: Rhombus 80° Applications / Features Material: uncoated carbide Chipbreaker type: X15 Suitable for: aluminium and non‑ferrous metals Intended use: drilling and bore finishing indexable insert Series note: Walter N‑grade — optimised for non‑ferrous materials FAQ What materials is this insert best suited for? The insert is formulated for aluminium and other non‑ferrous metals; the WAK15 grade and X15 chipbreaker minimise material adhesion and support stable chip formation. Is the insert coated? No, the WAK15 version is an uncoated carbide insert, chosen to retain a very sharp edge for adhesive, soft materials. Which insert geometry does CCGT060202‑X15 indicate? CCGT denotes a rhombic 80° insert form; the size code 060202 specifies the nominal size and thickness for correct toolholder fit. Can this insert be used for finishing and roughing operations? The small corner radius and sharp edge are optimised for finishing and precision bore tasks in non‑ferrous materials; for heavy roughing, a larger radius or different grade may be preferable. How does the X15 chipbreaker affect performance? The X15 chipbreaker helps to control chip form and evacuation in aluminium alloys, reducing the risk of long, tangled chips and improving surface consistency. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCGT060202-X15 WTP35 T Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide durability, precise rhombic 80° geometry and effective X15 chip control for reliable boring performance; order the CCGT060202-X15 WTP35 insert directly via Metav Werkzeuge or ask our consultants if needed CCGT060202-X15 WTP35 — Boring/Enlarging Indexable Insert by Walter Tools CCGT060202-X15 WTP35 is a rhombic 80° indexable insert designed for precision boring and related turning operations, offering a coated carbide grade and a fine 0.2 mm corner radius for improved surface quality Coated carbide grade WTP35 Rhombic 80° insert geometry 7° clearance for reduced rubbing 0.2 mm corner radius for fine finishing Proven process reliability and productivity gains The combination of the WTP35 grade and a coated carbide substrate provides a balance of wear resistance and edge strength that supports high-volume production. The insert’s X15 chipbreaker promotes controlled chip formation, reducing the risk of re-cutting and tool loading; this translates into longer effective cutting periods and fewer interruptions on the machine. For cost-conscious operations, the stability of the cutting edge contributes to predictable performance and reduced rework rates. Material suitability should be verified against the product matrix to ensure optimal cutting parameters. Geometry that enhances versatility and surface finish The rhombic 80° form delivers flexibility in entry angle and is well suited for bore enlargement where access and approach angles vary. A 7° clearance reduces flank contact and heat generation, helping to maintain dimensional accuracy over longer cycles. The 0.2 mm corner radius supports a finer surface finish on challenging internal contours while still offering sufficient edge strength for light to medium engagement. These geometric choices allow efficient transitions between roughing and finishing passes with only minimal setup changes. Practical advantages in handling and tool life As an indexable insert, the design enables rapid edge changes, lowering machine downtime and simplifying inventory logistics. The nominal size 06 and thickness 02 are compatible with a wide range of standard toolholders, easing integration into existing tool systems. Tolerance class G ensures consistent seating and repeatability in clamping systems, which directly supports process reproducibility. Because the exact substrate and coating behaviour can vary by catalogue specification, the insert’s matrix notes recommend checking detailed recommendations for feed and speed to achieve the best tool life. For specific cutting data, application advice or to confirm suitability of the Walter Tools CCGT060202-X15 WTP35 insert for particular materials, contact Metav Werkzeuge for expert consultation at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: CCGT060202-X15-WTP35-WALTER Manufacturer: Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte Facts Clearance angle: 7° Corner radius: 0.2 mm Insert form: Rhombus 80° Size: 06 Thickness: 02 Tolerance class: G Special features Grade: WTP35 (coated carbide) Chipbreaker: X15 Series: Walter Schneidstoffsorte — open series Execution: T Material specification: catalogue-dependent Note: Check product matrix for material suitability FAQ What materials is this insert suitable for? Suitability depends on the detailed product matrix; the CCGT060202-X15 WTP35 is a coated carbide grade intended for a broad range of turning and boring tasks, but material compatibility should be checked against the manufacturer’s matrix. How does the X15 chipbreaker affect performance? The X15 chipbreaker is engineered for controlled chip formation and evacuation during internal operations, which improves chip control and reduces risk of re-cutting with the CCGT060202-X15 WTP35 insert. Can the insert be used for both roughing and finishing? Yes. The rhombic 80° geometry combined with the 0.2 mm corner radius allows transitions between light finishing cuts and moderate material removal, depending on cutting parameters. What does tolerance class G imply for clamping? Tolerance class G indicates consistent manufacturing tolerances to ensure reliable seating and repeatable positioning in the toolholder, supporting dimensional accuracy across indexed edges. Which toolholders accept size 06, thickness 02 inserts? Standard boring and turning toolholders designed for indexable inserts in size 06 with thickness 02 are compatible; verify holder seat geometry and clamping method for perfect fit with the insert. Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany
CCGT060202-X15 WXM15 Wendeplatten - Walter Tools
Efficient machining of non‑ferrous materials is achieved by the combination of a sharp WXM15 uncoated carbide grade and a Rhombus 80° geometry with a 7° clearance angle; order the insert directly via Metav Werkzeuge or request application advice for optimal process parameters. CCGT060202-X15 WXM15 — Drilling/Reaming Indexable Insert, Rhombus 80°, Walter Tools The CCGT060202-X15 WXM15 is a drilling/reaming indexable insert designed for productive machining of non‑ferrous metals within the Walter N‑grade system. Uncoated carbide for non‑ferrous metals Rhombus 80° geometry, 7° clearance 0.2 mm corner radius for fine finishes Increased productivity for non‑ferrous machining The combination of the WXM15 uncoated carbide grade and the X15 chipbreaker is engineered to improve cutting stability when machining non‑ferrous metals such as Aluminium, copper and Messing. The sharp, wear‑resistant edge reduces cutting forces and helps prevent material adhesion that can otherwise degrade cycle times. For operations where chip control and uninterrupted throughput matter, this insert supports higher feed rates while maintaining consistent tool life, helping to lower overall process costs and improve production reliability. Geometry that supports precision and surface quality The Rhombus 80° plate shape with a 7° clearance angle and a 0.2 mm corner radius delivers a balance between strength and fine finishing. The 80° approach provides axial rigidity in drilling and reaming operations, while the modest corner radius enables a controlled burr formation and improved surface integrity. This geometry is particularly beneficial where component tolerances and repeatable finishes are required, as it reduces vibration and promotes a stable cutting edge throughout the tool life. System compatibility and reliable handling in workshops Designed for the Walter N‑Sortensystem, the insert integrates into common indexable toolholders managed in standard production tool chests. The designation CCGT060202‑X15 clarifies the geometry and chipbreaker, while the grade WXM15 indicates an uncoated carbide optimised for N‑materials. Tolerance class G and execution T ensure consistent seating and repeatability between tool changes. For operations that demand swift insert swaps and predictable performance, this configuration supports efficient changeovers and simple inventory management. Application guidance and process benefits When used for drilling or reaming tasks in soft and ductile materials, the sharp cutting edge and the X15 chip control reduce the tendency for stringy chips and material build‑up, lowering the risk of surface defects. The technical balance between rake and clearance also minimises heat generation at the cutting zone, which can extend effective edge life even without a coating. For shops aiming to combine cycle time improvement and reproducible component quality, the insert represents a pragmatic choice within standardised tool systems. For process recommendations, grade selection or stock enquiries for this Walter Tools insert, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss application parameters and availability. Technical data Article number: CCGT060202-X15-WXM15-WALTER Designation without grade: CCGT060202-X15 ISO designation: CCGT060202-X15 WXM15 Manufacturer: Walter Tools Series: Walter N-Sortensystem Grade: WXM15 Execution: T Facts Clearance angle: 7° Corner radius: 0.2 mm Plate size: 06 Plate thickness: 02 Tolerance class: G Special features Uncoated carbide (WXM15) Suitable for non‑ferrous metals (N) Rhombus 80° plate shape Chipbreaker: X15 Series: Walter N‑Sortensystem SKU: CCGT060202-X15-WXM15-WALTER Designation without grade: CCGT060202-X15 Execution: T FAQ Which materials is this insert intended for? The CCGT060202‑X15 WXM15 insert is intended for non‑ferrous metals (ISO group N), including Aluminium, copper and Messing, where a sharp cutting edge and good chip control are required. What are the main benefits of the WXM15 grade? WXM15 is an uncoated carbide grade that offers a sharp cutting edge and reliable wear resistance for N‑materials; the grade on the CCGT060202‑X15 WXM15 insert helps to reduce material adhesion and maintain edge integrity. How does the Rhombus 80° geometry influence performance? The Rhombus 80° shape increases axial rigidity and, together with the 7° clearance and 0.2 mm corner radius, helps to deliver stable cutting, reduced vibration and improved surface finish during drilling and reaming. Is the chipbreaker suitable for stringy chips? The X15 chipbreaker on this insert supports controlled chip formation in ductile materials, improving evacuation and lowering the risk of chip entanglement in the toolpath. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany The Walter AG (brand: Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik group. Protected brand names and trademarks are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered item is original, factory‑new merchandise from the manufacturer.
CCGT060202-X5 WAK15 Wendeplatten - Walter Tools
Efficient machining of aluminium and other non‑ferrous metals is achieved by the combination of a sharp, uncoated WAK15 carbide grade and an X5 chipbreaker that promotes consistent chip control; the insert’s rhombic 80° form and precise 7° clearance help maintain reliable edge life. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. CCGT060202-X5 WAK15 boring/reboring indexable insert — WAK15 for aluminium & non‑ferrous metals (Walter Tools) The CCGT060202-X5 WAK15 is a rhombic 80° boring/reboring indexable insert, optimised for machining aluminium and other non‑ferrous materials in serial and single‑pass operations *Uncoated WAK15 carbide for aluminium *Optimised X5 chipbreaker *Rhombic 80° insert form *7° clearance; 0.2 mm nose radius Consistent cutting performance for non‑ferrous work The WAK15 grade is an uncoated carbide specifically intended for machining aluminium and similar non‑ferrous alloys; its microstructure and sharp edge geometry reduce built‑up edge and prevent material adhesion. In practice, this means more reliable surface finish and fewer interrupted cycles during production runs. The insert’s design focuses on controllable chip formation and reduced friction, which is particularly beneficial when the priority is a clean cut rather than heavy roughing. Predictable chip control and surface quality The X5 chipbreaker delivers stabilised chip flow that helps avoid entanglement in the bore and keeps coolant access clear. Combined with the rhombic 80° form and a modest 0.2 mm radius, the geometry balances cutting edge strength with the ability to produce fine finishes. The specified 7° clearance reduces rubbing on the flank face, improving repeatability and lowering the risk of premature edge wear during medium‑speed aluminium turning or boring operations. Compact dimensions for standard toolholders The CCGT060202-X5 WAK15 insert corresponds to the common 06 size and 02 thickness, allowing straightforward replacement in many industry standard boring and reboring tool bodies. Tolerance class G ensures consistent seat fit and indexability, which reduces set‑up time and contributes to process stability. Because the insert is uncoated, cutting parameters should be adapted for lubrication and feed to achieve optimal tool life in delicate non‑ferrous tasks. Operational advantages that matter on the shop floor Using a purpose‑designed indexable insert for aluminium machining reduces cycle time and the need for rework; the combination of material grade and chipbreaker supports both high surface quality and predictable tool life. The insert’s compatibility with the Walter N‑Sortensystem series means straightforward grade allocation across tool inventories, simplifying tooling logistics and procurement. For operations seeking a balance of precision and economy, this insert supports productive, repeatable results while remaining simple to implement. Discuss application requirements with Metav Werkzeuge when specifying Walter Tools WAK15 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and delivery options Technical Data Article number: CCGT060202-X5-WAK15-WALTER Designation: CCGT060202-X5 WAK15 Manufacturer: Walter Tools Series: Walter N-Sortensystem Facts Clearance angle: 7° Corner radius: 0.2 mm Insert form: Rhombic 80° Insert size: 06 Thickness: 02 Tolerance class: G Chipbreaker: X5 Special features Uncoated carbide (WAK15) Application: aluminium and non‑ferrous metals Suitable for boring and reboring toolholders Sharp cutting edge for reduced material adhesion FAQ Which materials is this insert intended for? This insert is designed for aluminium and other non‑ferrous metals; the WAK15 grade and geometry of the CCGT060202-X5 WAK15 by Walter Tools favour machining of these materials. Is the insert coated or uncoated? The CCGT060202-X5 WAK15 is an uncoated carbide insert, the uncoated specification supporting a sharp edge and minimising built‑up edge in non‑ferrous applications. How does the X5 chipbreaker affect performance? The X5 chipbreaker improves chip control and evacuation during boring operations, which helps maintain consistent surface finish and reduces the likelihood of chip entanglement in the bore. What are the key geometry values to consider when setting up? Important geometry values are the rhombic 80° form, the 7° clearance angle and the 0.2 mm nose radius, all of which influence contact conditions and finished surface quality for the CCGT060202-X5 WAK15. Can this insert be used in standard boring toolholders? Yes, the insert’s 06 size and 02 thickness are compatible with many standard boring and reboring tool bodies, and the tolerance class G supports repeatable seating and indexing. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the owners of those trademarks. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
CCGT060202-X5 WTP35 T Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, precise geometry, and robust chip control for consistent machining results; order the insert directly via Metav Werkzeuge or consult the team for application advice. CCGT060202-X5 WTP35 drilling/reboring indexable insert — Walter Tools, rhombus 80° with 7° clearance CCGT060202-X5 WTP35 is a coated carbide indexable insert intended for drilling and reboring applications, combining a defined clearance angle and a dedicated chipbreaker for controlled material removal. Rhombus 80° geometry for flexible insert positions Coated carbide grade WTP35 for stable edge life Chipbreaker X5 for improved chip control 7° clearance angle for consistent cutting action Precise geometry for reliable machining outcomes The rhombic 80° geometry and low 7° clearance deliver a reproducible cutting edge position that supports stable tool paths and predictable results in series production. The engineered chipbreaker X5 stabilises chip formation, reducing the risk of clogging and minimising downtime. These geometric characteristics translate into a quantifiable improvement in process security and repeatability, which is particularly relevant for CNC and production environments where cycle times and part tolerances determine overall efficiency. Coated carbide grade engineered for broad tool life Built on the WTP35 coated-carbide grade, this insert focuses on wear resistance and consistent performance across a range of turning and boring tasks. The coating and substrate combination promotes steady edge retention and helps maintain surface finish quality over extended runs. For operations seeking an economical balance between performance and life, this grade reduces the frequency of insert changes while preserving cutting stability, thereby enhancing overall productivity in batch and continuous machining. Application guidance and compatibility considerations Material suitability should be verified against the supplier product matrix before selection; the insert’s series designation and coating determine optimal workpiece ranges. Where uncertainty exists about compatibility with a specific alloy or hardened material, refer to the technical matrix or request application support. Auxiliary benefits include clearly defined tolerance class and a compact corner radius that supports fine finishing passes and helps meet tight dimensional requirements on critical bores. Contact Metav Werkzeuge for tailored recommendations on toolholders, cutting parameters and suitable workpiece materials, or order the CCGT060202-X5 WTP35 insert through Metav Werkzeuge for fast, application-focused delivery Technical data SKU: CCGT060202-X5-WTP35-WALTER Designation: CCGT060202-X5 WTP35 Product type: drilling/reboring indexable insert Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Facts Clearance angle: 7° Corner radius: 0.2 Insert form: Rhombus 80° Size code: 06 Thickness code: 02 Chipbreaker: X5 Tolerance class: G Special features Coating/substrate: coated carbide (WTP35) Series description: WTP35 is a Walter coated carbide grade Material note: catalogue-dependent material specification Application advice: check product matrix for material suitability FAQ What materials is this insert suitable for? Material suitability must be checked in the supplier product matrix; the CCGT060202-X5 WTP35 insert uses a coated carbide grade whose workpiece range is specified in the technical matrix. Can this insert be used for finishing passes? Yes, the small corner radius and the insert’s geometry support fine finishing operations when cutting parameters are adapted to the workpiece and toolholder setup. How does the X5 chipbreaker affect machining? The chipbreaker X5 promotes controlled chip formation and evacuation, improving process stability and reducing the likelihood of built-up edge or chip congestion during drilling and reboring. Is the clearance angle suitable for interrupted cuts? The 7° clearance provides a stable edge condition that can withstand varying engagement; suitability for interrupted cuts depends on the workpiece material and cutting parameters. Where to get detailed cutting data and selection help? Cutting data and application guidance are available from Metav Werkzeuge; consult the product matrix or request parameter recommendations for the specific operation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen. Protected trademarks and product names are the property of their respective owners. Brand names are cited for clarification purposes only and do not imply any affiliation between our company and the trademark holders.
CCGT060202-X5 WXM15 Wendeplatten - Walter Tools
Take advantage of the combination of precise geometry, a dedicated WXM15 uncoated carbide grade and effective chip control for consistent drilling and boring of non‑ferrous metals; order directly via Metav Werkzeuge or consult our specialists for application advice. CCGT060202-X5 WXM15 drill/boring indexable insert, X5 chipbreaker, for non‑ferrous metals — Walter Tools A high‑precision drill and boring insert, CCGT060202-X5 WXM15, engineered for efficient machining of non‑ferrous metals with a rhombic 80° form and optimised chip control. X5 chipbreaker for reliable chip control Uncoated carbide grade WXM15 for NE metals Rhombic 80° form with 0.2 mm corner radius 7° clearance and tolerance class G Consistent bore quality from defined geometry The insert’s rhombic 80° shape and finely specified 0.2 mm corner radius deliver reproducible bore entry and wall finish, reducing the need for secondary passes. Such geometry supports stable tool engagement in holes and pockets, which in turn lowers scrap rates and shortens cycle times. For manufacturers seeking predictable results, the defined form and radius translate into fewer process adjustments and a smoother production flow. Grade and coating tailored to non‑ferrous machining Designed as an uncoated carbide grade, WXM15 is optimised for machining non‑ferrous metals, where sharp cutting edges and low adhesion are essential. The material balance minimises built‑up edge on aluminium, copper and messing, while maintaining edge stability during interrupted cuts. This specification helps preserve surface integrity and reduces the frequency of regrinds, improving tool life economically. Effective chip handling and process security The X5 chipbreaker geometry improves chip segmentation and evacuation when machining soft, ductile materials. Reliable chip formation reduces the risk of clogging in deep bores and enhances coolant access to the cutting zone. Combined with 7° clearance, the insert prevents rubbing and minimises frictional heat, supporting consistent cutting performance and repeatable hole tolerances under serial production conditions. Production advantages and practical integration Because the insert is supplied in the Walter N‑Sortensystem, compatibility with established toolholders and easy grade identification are assured. The tolerance class G and standardised 06 size facilitate fast tool setup and replacement, reducing machine downtime. For pragmatic workshop integration, the specification supports both prototype runs and ongoing series manufacture with an emphasis on process robustness and straightforward tool management. Contact Metav Werkzeuge for a tailored application assessment or to discuss integrating Walter Tools drill/boring inserts into existing processes — eMail: info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data SKU: CCGT060202-X5-WXM15-WALTER Article: CCGT060202-X5 WXM15 Manufacturer: Walter Tools Product type: Drill/boring indexable insert Series: Walter N‑Sortensystem Grade: WXM15 Core data Free angle: 7° Corner radius: 0.2 mm Insert size: 06 Thickness: 02 Form: Rhombic 80° Tolerance class: G Special features Chipbreaker: X5 Material: uncoated carbide Application: non‑ferrous metals (NE) Execution: T FAQ What materials is this insert designed for? The CCGT060202-X5 WXM15 drill/boring indexable insert from Walter Tools is specified for non‑ferrous metals, including aluminium, copper and messing, as indicated by the WXM15 grade. How does the X5 chipbreaker improve machining? The X5 chipbreaker promotes segmented chip formation and secure evacuation, reducing clogging risks in deep bores and supporting stable cutting when machining soft, ductile materials. Can this insert be used in existing Walter N‑series toolholders? Yes, the insert is part of the Walter N‑Sortensystem, ensuring compatibility with standard holders designed for this series and easing tool changes and logistics. What dimensional tolerances and geometry are specified? The insert is manufactured to tolerance class G, with a rhombic 80° form, 0.2 mm corner radius and 7° clearance to support repeatable hole geometry. Is the grade coated or uncoated, and why does that matter? The WXM15 grade is uncoated carbide, chosen to maintain sharp cutting edges and reduce material adhesion when machining non‑ferrous metals, improving surface quality and tool life. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCGT060202FS-1 WDN10 WDN10 Wendeplatten - Walter Tools
Benefit from the combination of polycrystalline diamond wear resistance, precise Rhombic 80° geometry and a fine 0.2 mm corner radius for reliable, high-precision non‑ferrous machining; order the insert directly via Metav Werkzeuge or speak with our consultants for application advice. CCGT060202FS-1 WDN10 – PKD indexable insert, Rhombic 80° by Walter Tools CCGT060202FS-1 WDN10 is a PKD indexable insert designed for drilling, boring and turning operations on abrasive, non‑ferrous materials Polykristalliner Diamant (PKD) for abrasive materials Rhombic 80° geometry for secure cutting engagement 0.2 mm corner radius for sharp, repeatable edges 7° clearance angle for controlled chip flow Increased process reliability for abrasive, non‑ferrous machining The PKD grade offers exceptional wear resistance, which directly reduces tool change frequency and downtime when machining abrasive non‑ferrous materials such as aluminium alloys with abrasive inclusions, copper or composite panels. The polycrystalline diamond structure provides a hard, continuous cutting edge that holds form much longer than conventional cemented carbide grades, leading to a steadier production rate and fewer interruptions. For shops seeking consistent surface quality and reduced rework, this grade is a robust, predictable choice. Geometry engineered for stable engagement and better surface finish The rhombic 80° form with a 0.2 mm corner radius ensures a stable contact angle and low cutting forces during plunge and turning operations. The geometry helps to distribute cutting loads evenly, which supports dimensional consistency and improved surface finish on critical components. The 7° clearance angle assists chip evacuation and reduces rubbing on the flank face, contributing to lower heat generation at the cutting edge and prolonged edge life. Clear technical benefits and straightforward integration into production This insert is supplied in the ISO designation CCGT060202FS-1 WDN10, making it straightforward to specify in tool lists and CAM systems. The compact plate size and standard seat form mean the insert fits many common indexable holders used for drilling and turning operations, simplifying stock management. Where higher economies of scale are needed, the extended tool life of PKD inserts can deliver measurable cost efficiencies over time by lowering consumable consumption and machine idle time. Practical application advice and compatibility notes PKD inserts are optimised for non‑ferrous and abrasive materials; they are not intended for continuous dry cutting of hardened ferrous alloys. When adopting this insert, verify the material matrix compatibility for the intended workpiece and machining strategy. Light to moderate cutting speeds with stable feeds are recommended to maintain edge integrity; in many applications, controlled coolant or minimal lubrication improves chip control and surface quality. For unusual alloys or composites, consult Metav Werkzeuge for test recommendations and parameter tuning. For demanding non‑ferrous machining tasks, rely on the PKD performance of Walter Tools — contact Metav Werkzeuge to discuss suitability for specific materials and to request tailored cutting data. Technical data Article number: CCGT060202FS-1-WDN10-WALTER ISO designation: CCGT060202FS-1 WDN10 Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Core figures Clearance angle: 7° Corner radius: 0.2 mm Plate size: 06 Plate thickness: 02 Tolerance class: G Chipbreaker type: 1 Special features Grade: WDN10 (PKD, polycrystalline diamond) Series: Walter Schneidstoffsorte - Serie offen Plate form: Rhombus 80° Execution: T Material data: Katalogabhängig FAQ What materials is this insert best suited for? The WDN10 PKD grade is intended primarily for abrasive, non‑ferrous materials; the CCGT060202FS-1 WDN10 insert is especially effective on aluminium alloys with inclusions, copper and similar abrasive non‑ferrous workpieces. Can this insert be used for finishing operations? Yes. With its fine 0.2 mm corner radius and stable rhombic geometry, the insert supports tight tolerances and improved surface quality when parameters are correctly adjusted for finish passes. Is the PKD grade suitable for steel or stainless steel? PKD grades such as WDN10 are generally not recommended for continuous machining of ferrous steels; the CCGT060202FS-1 WDN10 insert is optimised for non‑ferrous, abrasive applications rather than hardened or conventional steels. How does the 7° clearance angle influence performance? The 7° clearance angle reduces flank rubbing and improves chip flow, which helps maintain edge life and reduces heat build-up during sustained cutting with the PKD grade. What information is needed to select this insert for production? Provide the workpiece material, required surface finish, machine rigidity and typical spindle speeds; Metav Werkzeuge can then advise on whether the CCGT060202FS-1 WDN10 insert is the optimal choice and propose cutting data. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanatory purposes only and do not imply any affiliation with our company. The supplied article is an original, factory‑new product of the named manufacturer.
CCGT060202M-FP2 WEP10C WEP10C Wendeplatten - Walter Tools
Benefit from the WEP10C cermet grade for superior surface quality and the FP2 chipbreaker for dependable chip control; the rhombic 80° geometry with a 0.2 mm corner radius supports fine finishing and stable engagement. Order directly via Metav Werkzeuge or request application advice from our consultants. CCGT060202M-FP2 WEP10C – Rhombic 80° cermet insert for drilling/boring and turning (Walter Tools) The CCGT060202M-FP2 WEP10C is an indexable insert designed for finishing operations where a stable cutting edge and excellent surface quality are required in light to medium turning and boring tasks. Cermet grade WEP10C for high surface quality 0.2 mm corner radius for fine finishing FP2 chipbreaker for reliable chip control High-quality finish and extended edge life The cermet WEP10C composition delivers a consistently fine surface finish and improved wear resistance compared with standard carbide grades. In practice, this means fewer reworks and longer intervals between tool changes, which supports uninterrupted production. Cermet is particularly effective at maintaining a sharp edge under finishing conditions; the result is reduced micro-chipping and a more predictable part quality. This insert is therefore suited to applications requiring tight tolerances and good visual surface characteristics. Stable chip control for reliable process security Equipped with an FP2 chipbreaker, the insert provides controlled chip formation across a range of light to moderate cutting depths. Stable chip control reduces the risk of built-up edge and helps maintain consistent cutting forces, which in turn enhances process security and reduces cycle-time variability. The chipbreaker geometry is engineered to break and evacuate chips efficiently during continuous turning and boring cycles, contributing to safer, cleaner machining and fewer interruptions on the machine. Versatile geometry for finishing engagement The Rhombic 80° insert shape combined with a 0.2 mm corner radius and slim 02 thickness gives a balanced mix of access and rigidity for finishing passes. The angle and small corner radius allow precise edge contact and low cutting forces, which is beneficial when working on demanding finishes or when minimising component distortion is critical. The compact 06 insert size offers flexibility for use in a wide range of tool holders and boring heads, making it a practical choice where tool representation and accessibility are factors. Contact Metav Werkzeuge for tailored application advice on Walter Tools inserts and to request detailed machining parameters for the CCGT060202M-FP2 WEP10C Technical data Article number: CCGT060202M-FP2-WEP10C-WALTER SKU: CCGT060202M-FP2-WEP10C-WALTER Manufacturer: Walter Tools Designation: CCGT060202M-FP2 WEP10C Facts Corner radius: 0.2 mm Relief angle: 7° Insert form: Rhombus 80° Insert size: 06 Thickness: 02 Tolerance class: G Special features Series: Walter Cermet Grade: WEP10C (cermet) Chipbreaker: FP2 Execution: T Material specification: Katalogabhängig FAQ What materials is this insert intended for? The CCGT060202M-FP2 WEP10C insert is a cermet grade designed primarily for finishing applications; please check the specific material suitability matrix for the WEP10C grade before series use. How does the FP2 chipbreaker affect machining? The FP2 chipbreaker provides consistent chip segmentation and evacuation, improving chip control and helping to maintain stable cutting conditions with the CCGT060202M-FP2 WEP10C insert. Can this insert be used for both turning and boring? Yes, the geometry and Rhombic 80° form make the insert suitable for light to moderate turning as well as finishing boring tasks, where accurate edge contact and surface quality are priorities. What finishing results can be expected with this cermet grade? The WEP10C cermet is optimised for high-quality finishes, delivering fine surface texture and reduced risk of edge micro-chipping in finishing passes. Is the insert compatible with standard Walter tool holders? The CCGT060202M-FP2 WEP10C follows common indexable insert dimensions (06 size, 02 thickness) and is compatible with holders designed for Rhombic 80° CCGT inserts; confirm holder compatibility before assembly. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanation. There is no connection between our company and the mentioned brands. The offered article is original, brand-new goods of the manufacturer. Markennamen und geschützte Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCGT060202ML-FX4 WEP01C WEP01C Wendeplatten - Walter Tools
High wear resistance and a fine surface finish result from the combination of the WEP01C cermet grade and the FX4 chipbreaker with a 0.2 mm nose radius, delivering stable finishing performance in turning operations. Order the CCGT060202ML-FX4 WEP01C directly via Metav Werkzeuge or ask our consultants if needed. CCGT060202ML-FX4 WEP01C turning insert — Rhombus 80°, 0.2 mm nose — Walter Tools The CCGT060202ML-FX4 WEP01C is a Rhombus 80° turning insert from the Walter Cermet series, engineered for finishing and consistent chip control in general turning applications. Cermet grade WEP01C for fine finishes FX4 chipbreaker for stable chip formation Rhombus 80° form for versatile turning 0.2 mm nose radius and 7° relief Improved surface quality through cermet performance The Walter Cermet grade WEP01C is designed to provide a consistent and wear-resistant cutting edge that favours high-quality surface finishes in finishing cuts. The combination of the cermet substrate and the precise geometry reduces flank wear and helps maintain part tolerances over longer runs. For shops seeking reliable cosmetic and dimensional results, this grade supports repeatable performance while keeping tool change cycles predictable. Stable machining and predictable chip control The FX4 chipbreaker is optimised for controlled chip formation in finishing operations, promoting a continuous machining process and reducing the risk of tool interruptions. Together with the 0.2 mm nose radius and a 7° relief angle, the insert provides a balance between edge strength and low cutting forces, which can lead to improved cycle stability and reduced rework. The tolerance class G ensures manufacturing consistency, supporting reproducible results across batches. Practical geometry for flexible tool setup The Rhombus 80° insert form (CCGT) provides flexible approach angles for a range of turning tasks, while the nominal size 06 and thickness 02 match common toolholder interfaces for straightforward integration into existing tool sets. The WEP01C grade and the FX4 chipbreaker should be selected in line with the application matrix; material suitability is catalogue-dependent, so verification in the product matrix is recommended before specifying for a new application. This measured approach supports process security and efficient tool utilisation. Contact Metav Werkzeuge today to discuss availability of Walter Tools CCGT060202ML-FX4 WEP01C inserts and to request application advice from our consultants Technical Data Article number: CCGT060202ML-FX4-WEP01C-WALTER Designation: CCGT060202ML-FX4 WEP01C Manufacturer: Walter Tools Series: Walter Cermet Execution: T Core specifications Relief angle: 7° Corner radius: 0.2 mm Insert size: 06 Thickness code: 02 Tolerance class: G Special features Grade: WEP01C Chipbreaker: FX4 Plate form: Rhombus 80° Material information: Katalogabhängig Base designation: CCGT060202ML-FX4 FAQ Which materials can this cermet insert machine effectively? Material suitability for the CCGT060202ML-FX4 WEP01C must be verified in the product matrix; the Walter Cermet series is typically selected for finishing tasks where improved surface quality and edge wear resistance are required. Will the CCGT geometry fit standard toolholders? The CCGT designation indicates the Rhombus 80° insert form, which fits toolholders specified for CCGT inserts; ensure the holder accepts the size 06 and thickness 02 geometry. How does the FX4 chipbreaker affect process reliability? The FX4 chipbreaker promotes controlled chip formation and evacuation, reducing the likelihood of interruptions and supporting a steady machining process with fewer manual interventions. What does the tolerance class G indicate for this insert? Tolerance class G denotes the manufacturing tolerance level applied to the insert, contributing to consistent dimensional conformity and repeatable seating in the toolholder. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item refers to original, factory-new goods from Walter Tools.
CCGT060202MR-FX4 WEP01C WEP01C Wendeplatten - Walter Tools
Take advantage of the Walter Tools CCGT060202MR-FX4 WEP01C insert’s combination of cermet wear resistance and a controlled FX4 chipbreaker for consistent turning performance; its Rhombus 80° geometry and 0.2 mm corner radius support reliable edge engagement in precision applications. Order or request application advice directly via Metav Werkzeuge or consult our technical team for material-specific recommendations. CCGT060202MR-FX4 WEP01C indexable turning insert – Walter Tools, Rhombus 80°, FX4 chipbreaker CCGT060202MR-FX4 WEP01C is an indexable turning insert optimised for fine finishing and stable chip control in a variety of turning operations Cermet grade WEP01C for fine finishes Rhombus 80° shape for versatile engagement FX4 chipbreaker for consistent chip formation Reduced rework through stable edge performance The Walter Cermet grade used in this insert is designed to offer a stable cutting edge and reliable surface quality. The combination of a cermet substrate and the FX4 chipbreaker reduces built-up edge and promotes predictable chip formation, which in turn lowers the need for rework and finishing passes. For operations that prioritise consistent surface quality, the geometry contributes to a repeatable process window, helping maintain productivity across batch runs. Geometry that supports versatile turning tasks The Rhombus 80° insert form and the small 0.2 mm corner radius provide a balance of accessibility and edge strength, enabling tight corner access and controlled cutting on profiles. The insert’s 7° clearance angle aids in reducing rubbing and heat generation at the flank, which can extend edge life under light to medium finishing cuts. These geometric features deliver practical advantages in setups where tool accessibility and surface integrity are decisive. Practical application and material considerations This turning insert belongs to the Walter Cermet series and is graded WEP01C, a cermet formulation that is typically chosen for finishing and semi-finishing of steels and certain alloyed materials; users should verify the exact material suitability against the product matrix. The FX4 chipbreaker is tailored to produce short, manageable chips in finishing conditions, simplifying chip evacuation and safeguarding workpiece surfaces during continuous production. Contact Metav Werkzeuge for a materials consultation and specification matching for Walter Tools cermet inserts to ensure optimal process integration Technical Data Article number: CCGT060202MR-FX4-WEP01C-WALTER Label: Drehwendeschneidplatte CCGT060202MR-FX4 WEP01C Walter Tools Product type: Indexable turning insert Facts Clearance angle: 7° Corner radius: 0.2 mm Size designation: 06 Thickness designation: 02 Tolerance class: G Special features Series: Walter Cermet Grade: WEP01C (cermet) Chipbreaker: FX4 Shape: Rhombus 80° Execution: T Material designation: Katalogabhängig Base designation: CCGT060202MR-FX4 FAQ What operations suit this insert best? This indexable turning insert from Walter Tools is intended primarily for finishing and semi-finishing turning operations where a cermet grade and the FX4 chipbreaker produce fine surface quality and consistent chips. Is the WEP01C grade suitable for hardened steels? WEP01C is a cermet grade designed for high-quality finishes; suitability for hardened or pre-hardened steels should be verified against the product matrix for the specific workpiece material. How does the FX4 chipbreaker affect chip control? The FX4 chipbreaker on the CCGT060202MR-FX4 WEP01C insert promotes short, consistent chips under finishing conditions, improving evacuation and reducing the risk of surface damage. Can this insert be used for heavy roughing? The insert geometry and small corner radius are optimised for finishing; heavy roughing may require a different grade or a larger radius to ensure edge strength and tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCGT060204-FL2 WPP20G FL2 Wendeplatten - Walter Tools
The Tiger‑tec Gold grade and FL2 chipbreaker combine to deliver productive, consistent steel turning with reliable chip control; the 0.4 mm corner radius and 7° clearance support good surface finish and reduced rubbing. Order the insert directly via Metav Werkzeuge or consult the technical team for application advice. CCGT060204-FL2 WPP20G — Turning insert for steel (Walter Tools) CCGT060204-FL2 WPP20G is a coated carbide turning insert designed for steel machining, optimised for process reliability and versatile cutting conditions Tiger‑tec Gold coating for extended life Optimised chip control with FL2 geometry Suitable for a wide range of steel grades 0.4 mm corner radius for fine surface finish Consistent cutting performance for steel components The combination of Tiger‑tec Gold coating and a coated carbide substrate provides stable wear resistance and predictable tool life when machining steel. The WPP20G grade is engineered for the thermal and mechanical demands of steel turning, balancing toughness and hardness for a broad spectrum of applications. Thanks to the FL2 chipbreaker, chips are broken and evacuated more reliably, which reduces the risk of built-up edge and leads to steady machining cycles and fewer interruptions. This makes the insert particularly suited to serial production where repeatability and low downtime are priorities. Reduced setup risk and improved surface quality The insert geometry—rhombus 80° with 7° clearance and a 0.4 mm corner radius—minimises rubbing and supports consistent contact conditions at the cutting edge. The small nose radius aids in attaining a refined surface finish while allowing moderate feeds, and the clearance angle reduces flank wear under continuous cutting. For engineers seeking a balance between finish and productivity, this indexable insert ensures process security and predictable results across varying steel grades, from more wear-resistant alloys to tougher materials. Practical handling and application notes for shop use Assembly and indexing follow standard turret insert procedures; the CCGT060204-FL2 WPP20G fits holders for 80° rhombic inserts and benefits from correct seat cleanliness and clamping torque to maintain repeatable accuracy. The FL2 chipbreaker performs best at medium cut depths and moderate feeds where controlled chip formation is required; increasing feed within recommended limits often improves chip segmentation and surface integrity. For newcomers, an indexable insert is an economical option: only the insert is replaced when worn, reducing toolholder costs and simplifying inventory management. For reliable, high‑throughput steel turning choose Walter Tools Tiger‑tec Gold inserts — contact Metav Werkzeuge for procurement or technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: CCGT060204-FL2-WPP20G-WALTER Name: Drehwendeschneidplatte CCGT060204-FL2 WPP20G Walter Tools Grade: WPP20G Series: Tiger‑tec Gold Manufacturer: Walter Tools Numbers / Core technical data Clearance angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 80° Plate size: 06 Plate thickness: 02 Tolerance class: G Special features Chipbreaker: FL2 Material suitability: Steel (P) Coating technology: Tiger‑tec Gold Execution: T ISO designation: CCGT060204-FL2 WPP20G FAQ What materials is this insert intended for? The CCGT060204-FL2 WPP20G turning insert (Walter Tools) is designed primarily for steel machining applications classified under ISO group P. How does the Tiger‑tec Gold coating benefit machining? The Tiger‑tec Gold coating on the WPP20G grade increases wear resistance and thermal stability during steel turning, contributing to longer, more consistent insert life. Which chipbreaker suits moderate depth cuts? The FL2 chipbreaker on this insert is optimised for medium cut depths and moderate feeds, delivering controlled chip formation and reliable evacuation. What does the 0.4 mm corner radius affect in practice? A 0.4 mm nose radius helps achieve improved surface finish while still allowing practical feed rates; it is a compromise between finishing quality and cutting robustness. Is this insert compatible with standard 80° rhombus holders? Yes, the rhombus 80° geometry of the insert is compatible with standard toolholders designed for 80° indexable inserts; proper seating and clamping ensure repeatable accuracy. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Walter Tools is mentioned for identification and comparison purposes only. The offered item is an original, factory‑new product of the manufacturer.
CCGT060204-FL2 WPP30G FL2 Wendeplatten - Walter Tools
The combination of a Tiger·tec Gold coating and the robust WPP30G grade ensures high process security and long tool life for steel turning; precise geometry and a 7° free angle improve chip control and surface finish. Order the CCGT060204-FL2 WPP30G insert directly via Metav Werkzeuge or contact the consultants for application advice. CCGT060204-FL2 WPP30G turning indexable insert — Tiger·tec Gold, Walter Tools A CCGT060204-FL2 WPP30G turning insert designed for efficient steel machining with a rhombic 80° form and FL2 chipbreaker Tiger·tec Gold coating boosts wear resistance Rhombic 80° insert for versatile turning tasks Suitable for steel according to ISO P 0.4 mm corner radius for consistent surface quality Consistent performance for steel turning operations The coated WPP30G grade, part of the Tiger·tec Gold series, is formulated for productive cutting of steels (ISO P). The combination of a wear-resistant coating and a coated carbide substrate provides a balance between toughness and hardness, which reduces flank wear and extends usable life in serial production. The rhombic 80° geometry delivers stable cutting forces and straightforward orientation in standard toolholders, while the FL2 chipbreaker assists controlled chip evacuation during medium to heavy cuts. These features reduce unplanned downtime and contribute to a measurable increase in process reliability. Predictable tool life and improved surface integrity A defined corner radius of 0.4 and a 7° free angle give repeatable engagement characteristics and help sustain surface quality across batches. The coated grade is optimised for typical heat generation and chip formation when machining steel, which means fewer insert changes and more consistent part tolerances. In practice, this leads to lower tooling consumption per finished component and a more stable production rhythm. The insert’s tolerance class G supports interchangeability and predictable set-up outcomes in automated manufacturing environments. Practical setup and benefits for production planning The compact format and standardised designation make integration into existing turning tool systems straightforward. The CCGT060204-FL2 form factor allows for flexible approach angles and is compatible with common clamping systems, simplifying inventory management. With the focus on process security and broad material coverage, planners benefit from simplified tool lists and fewer special variants. The documented suitability for steel (ISO P) assists in selecting cutting parameters and cooling strategies, improving overall throughput and reducing scrap rates. Contact Metav Werkzeuge today to discuss application-specific recommendations and stock availability for the CCGT060204-FL2 WPP30G turning insert by Walter Tools Technical data SKU: CCGT060204-FL2-WPP30G-WALTER Article designation: CCGT060204-FL2 WPP30G Manufacturer: Walter Tools Series: Tiger-tec Gold Facts Free angle: 7° Corner radius: 0.4 Insert size code: 06 Plate thickness code: 02 Tolerance class: G Special features Shape: Rhombus 80° Chipbreaker: FL2 Grade: WPP30G Application: Steel (ISO P) Execution: T FAQ Is this insert suitable for unalloyed and alloyed steels? Yes. The CCGT060204-FL2 WPP30G insert is specified for steel machining and is designed to handle both unalloyed and alloyed steels according to ISO P classifications. What advantages does the Tiger·tec Gold series provide? The Tiger·tec Gold technology used in the WPP30G grade improves wear resistance and edge stability, resulting in longer tool life and more consistent surface quality when turning steel components. Which insert geometry is represented by the product code? The CCGT060204-FL2 designation indicates a rhombic 80° insert with the FL2 chipbreaker and the size/thickness codes as given; this geometry suits a variety of general turning operations. How does the 0.4 corner radius affect the machining result? A corner radius of 0.4 provides a balance between strength and fine surface finish, helping to maintain dimensional accuracy while avoiding premature edge chipping during stable cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are used solely for explanation and identification of product compatibility. There is no affiliation between Metav Werkzeuge and the listed manufacturers. The offered item is an original, factory-new product of the manufacturer.
CCGT060204-FL2 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger-tec Silver coating and the WSM01 grade for secure chip formation and extended tool life; the rhombic 80° geometry with a 0.4 mm nose radius ensures improved surface finish and predictable cutting forces. Order genuine Walter Tools inserts through Metav Werkzeuge or ask our consultants for application guidance. CCGT060204-FL2 WSM01 Turning indexable insert, Tiger-tec Silver — Walter Tools The CCGT060204-FL2 WSM01 is a rhombic 80° turning indexable insert engineered for machining stainless steels and heat‑resistant superalloys in demanding turning operations Tiger‑tec Silver coated carbide grade WSM01 Rhombic 80° geometry with FL2 chipbreaker 7° clearance angle for reduced rubbing 0.4 mm nose radius for improved finish Consistent machining of stainless steels and superalloys The coated carbide WSM01 grade from the Tiger‑tec Silver series is tuned for materials that generate heat and challenge chip control, such as stainless steels and superalloys. The combination of a wear‑resistant coating and substrate formulation promotes stable chip formation, which directly reduces unexpected workpiece stops and improves process reliability. For production environments that prioritise repeatability, this insert provides measurable gains in tool life and machining stability while helping to maintain consistent cycle times. Geometry that improves surface quality and cutting efficiency The rhombic 80° insert shape paired with a 0.4 mm nose radius delivers a balance between strength at the cutting edge and the ability to achieve fine surface finishes. The FL2 chipbreaker assists in controlling chip flow and minimising entanglement, which reduces rework and machine downtime. A 7° relief angle lessens flank contact during cutting, lowering heat generation and contributing to a steadier cutting force; the result is fewer burrs and a reduced need for secondary finishing operations. Designed for easy integration and productive workflows With the industry standard CCGT designation and tolerance class G, this insert is compatible with established toolholders and changeover procedures, making it straightforward to integrate into existing turning cells. The compact 06 size and 02 thickness support a range of toolholder options while keeping insert costs and inventory manageable. The overall effect is reduced downtime and predictable replacement intervals, assisting production planners to improve throughput without complex adjustments. Contact Metav Werkzeuge today for technical advice, availability of genuine Walter Tools Tiger‑tec Silver inserts and tailored recommendations — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: CCGT060204-FL2-WSM01-WALTER Designation: CCGT060204-FL2 WSM01 Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM01 Product type: Turning indexable insert Facts Relief angle: 7° Nose radius: 0.4 mm Insert size designation: 06 Thickness designation: 02 Tolerance class: G Special features Coating: Tiger‑tec Silver Chipbreaker: FL2 Insert shape: Rhombic 80° Material suitability: S / M (stainless steels; heat‑resistant superalloys and titanium) Substrate: Coated carbide FAQ What materials is this insert suitable for? The Walter Tools CCGT060204-FL2 WSM01 insert is designed for stainless steels and heat‑resistant superalloys (ISO groups S and M), offering stable chip control under challenging thermal conditions. How does the FL2 chipbreaker benefit production turning? The FL2 chipbreaker on the CCGT060204-FL2 improves chip control and reduces the risk of entanglement, which helps maintain steady cutting conditions and lowers the likelihood of machine stoppages. Can this insert be used in standard CCGT toolholders? Yes; the insert follows the CCGT family designation and a tolerance class G, ensuring compatibility with common toolholders and simplifying tool changes in existing setups. What surface quality can be expected with the 0.4 mm nose radius? A 0.4 mm nose radius provides a good compromise between edge strength and surface finish, enabling finer finishes on turned parts while maintaining robustness in interrupted cuts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is among the world’s leading manufacturers of precision cutting tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes; there is no affiliation between our company and the mentioned brands. The offered article is original factory‑new merchandise of the manufacturer.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com