Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCMT09T304-MW4 WPP20G Wendeplatten - Walter Tools
Taking advantage of the Tiger·tec Gold coating and the MW4 chipbreaker, this turning insert combines long tool life with reliable chip control for steel machining; order directly via Metav Werkzeuge or request application advice from the technical team. CCMT09T304-MW4 WPP20G turning insert — Tiger·tec Gold, Walter Tools A CCMT09T304-MW4 WPP20G indexable turning insert engineered for robust ISO P (steel) machining with a Tiger·tec Gold coated carbide grade. Tiger·tec Gold coating for long tool life Stable chip formation with MW4 breaker Rhombic 80° geometry for versatile turning Extended tool life from advanced coating technology The Tiger·tec Gold coating combined with the WPP20G coated carbide grade delivers a balance of wear resistance and toughness tailored for steel machining. This composition reduces flank and crater wear under the thermal and mechanical loads typical for ISO P materials, resulting in fewer indexings and longer intervals between tool changes. The outcome is a measurable improvement in uptime and a lower cost per machined component, especially in high-volume turning operations. Reliable chip control and consistent surface quality Designed with a MW4 chipbreaker and Rhombic 80° CCMT geometry, the insert promotes predictable chip formation and stable cutting forces. The 0.4 mm nose radius and 7° clearance angle help maintain radial stability and produce consistent surface finishes during finishing and medium-turning passes. Clear chip evacuation reduces the risk of built-up edge and improves process security when machining unalloyed and alloyed steels. Versatile use for a broad range of steel applications Classified for ISO P materials, this grade is suited to conventional unalloyed and alloyed steels where a combination of wear resistance and edge robustness is required. The grade’s composition supports a wide cutting window, enabling productive cutting parameters across roughing and finishing steps. Choosing this indexable insert contributes to stable cycle times and predictable part quality in mixed-batch production. Compact specification that simplifies tool selection With the CCMT09 format, T3 thickness and the CCMT-style insert geometry, the component fits common turning toolholders that accept CCMT inserts, facilitating fast tooling changes. The moderate 0.4 mm corner radius offers a compromise between strength and finish capability, making this insert suitable where reliable performance and surface integrity are priorities rather than extreme radii or special contours. Contact Metav Werkzeuge to discuss process optimisation with Walter Tools Tiger·tec Gold inserts and secure consistent machining results Technical Data Article number / SKU: CCMT09T304-MW4-WPP20G-WALTER Designation: CCMT09T304-MW4 WPP20G Range / Series: Tiger-tec Gold Grade / Sort: WPP20G Manufacturer: Walter Tools Core Data Free angle: 7° Nose / corner radius: 0.4 mm Plate form: Rhombic 80° Plate size: 09 Plate thickness: T3 Tolerance class: M Special features Chipbreaker: MW4 Material group: P (Steel) Suitable for: Steel (ISO P) Intended application: Turning / indexable insert Base material: Coated carbide (Tiger·tec Gold technology) FAQ Which materials can be machined with this insert? The CCMT09T304-MW4 WPP20G insert is specified for ISO P materials and is optimised for machining unalloyed and alloyed steel grades. What benefit does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WPP20G grade enhances wear resistance while retaining edge toughness, improving tool life and consistency in steel turning applications under variable cutting conditions. Is this insert suitable for finishing operations? Yes; with a 0.4 mm corner radius and the MW4 chipbreaker, the insert supports good surface finishes on finishing passes while maintaining edge security. Does the CCMT09T304-MW4 fit standard CCMT toolholders? The CCMT09 format conforms to common CCMT geometries and is compatible with toolholders designed for CCMT indexable inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The described item is an original, factory‑new product of the manufacturer.
CCMT09T304-MW4 WSM20S MW4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WSM20S grade and the MW4 chipbreaker for secure chip control and extended tool life; this insert suits demanding turning in stainless steel and heat‑resistant superalloys. Order the CCMT09T304‑MW4 WSM20S directly via Metav Werkzeuge or ask the consultants for application support. CCMT09T304‑MW4 WSM20S — Rhombic 80° turning insert with Tiger·tec Silver, Walter Tools The CCMT09T304‑MW4 WSM20S is a coated turning insert designed for productive machining of stainless steel and heat‑resistant superalloys in industrial turning applications. Tiger·tec Silver coating for heat resistance WSM20S grade for stainless steel & superalloys Rhombic 80° form, 7° relief for versatile turning MW4 chipbreaker for consistent chip control High‑temperature cutting performance for demanding alloys The combination of the Tiger·tec Silver coating and the WSM20S carbide grade provides improved resistance to thermal loading and abrasion when machining tough materials. The coating technology enhances heat management at the cutting edge, while the grade is tuned for stable edge life during the interrupted cutting and high temperatures typical of stainless steel and nickel‑base alloys. As a result, the indexable insert delivers a reliable balance between wear resistance and toughness, reducing unplanned tool changes and supporting consistent production throughput. Geometry tuned for stability and surface quality The rhombic 80° shape with a 0.4 mm corner radius and a 7° relief angle offers a versatile geometry for general turning tasks and finishing passes. The moderate corner radius helps to maintain a strong cutting edge without sacrificing surface finish, and the relief angle reduces rubbing on the flank to lower cutting temperatures. The MW4 chipformer actively shapes chips for predictable evacuation, which lowers the risk of built‑up edge and improves process security. Together these features promote repeatable part quality and longer indexable insert life. Practical benefits and process recommendations Configured as a standard turning insert in size 09 with thickness T3, this solution integrates easily into common toolholders and machining setups. The combination of coating, grade and chip control targets operators who require productivity and reproducible results in mixed‑batch or series production. For roughing of heavy cross‑sections, consider conservative feeds to preserve the cutting edge; for finishing, the insert geometry supports superior surface integrity on stainless steel. The tolerance class M indicates suitability for applications where consistent insert geometry is essential for precision turning. For machining stainless steel and high‑temperature superalloys, contact Metav Werkzeuge for tailored cutting data and secure the Walter Tools CCMT09T304‑MW4 WSM20S insert to increase process stability and tool life. Technical data Article number: CCMT09T304‑MW4‑WSM20S‑WALTER Name: Drehwendeschneidplatte CCMT09T304‑MW4 WSM20S Walter Tools Type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts Grade: WSM20S Coating series: Tiger·tec Silver Relief angle: 7° Corner radius: 0.4 mm Insert size: 09 Thickness: T3 Special features Chipbreaker: MW4 Shape: Rhombic 80° Material suitability: S / M (stainless steel, superalloys) Tolerance class: M Series: Tiger‑tec Silver FAQ What materials is this insert suitable for? The CCMT09T304‑MW4 WSM20S insert is designed for stainless steel and heat‑resistant superalloys (material groups S and M), offering thermal stability and controlled chip formation for such alloys. How does the MW4 chipbreaker affect machining? The MW4 chipbreaker on this Walter Tools insert shapes chips for reliable evacuation, which improves process security and reduces the likelihood of built‑up edge during turning operations. What is the benefit of the 0.4 mm corner radius? A 0.4 mm corner radius provides a compromise between edge strength and surface finish, helping to maintain a durable cutting edge while delivering good workpiece quality in finishing passes. Is this insert suitable for both roughing and finishing? Yes; the geometry and coating enable productive roughing with appropriate cutting parameters and stable finishing with improved surface integrity on stainless steel. Which series and coating technology is used on the insert? The insert belongs to the Tiger‑tec Silver series and uses the associated coated carbide technology, optimised for thermal resistance and edge stability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarked names and designations are the property of their respective owners. Brand names are mentioned for clarification of application and compatibility. The offered article is original and brand‑new from the manufacturer. Walter Tools is a brand of the Walter AG, part of the Sandvik Group.
CCMT09T304-RK4 WKK10S WKK10S Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating with the RK4 chipbreaker and a 7° clearance angle delivers reliable chip control and extended tool life for cast iron machining; order directly via Metav Werkzeuge or contact our technical team for application advice. CCMT09T304-RK4 WKK10S indexable insert — RK4 chipbreaker for cast iron (Walter Tools) A CCMT09T304-RK4 WKK10S insert engineered for productive cast iron turning and boring, offering Tiger·tec Silver performance in a rhombic 80° geometry. Tiger·tec Silver coated carbide Optimised RK4 chipbreaker Designed for cast iron machining Rhombic 80° insert geometry Stable chip control for higher process efficiency The combination of the RK4 chipbreaker and the Tiger·tec Silver coating is designed to control the short, breaking chips typical of cast iron. The chipformer geometry reduces interruptions and decreases tool changes, which in turn supports higher productivity in serial production. For operators with limited metrology background: a chipbreaker channels and fractures chips reliably, preventing blockages and improving cycle consistency while also protecting the cutting edge from irregular loading. Geometry that improves surface finish and insert life The rhombic 80° geometry together with a 7° clearance and a 0.4 mm corner radius offers a balanced compromise between cutting strength and accessibility in tight turning grooves. The modest corner radius supports a better surface finish on interrupted surfaces and extends the effective life of the cutting edge under abrasive conditions typical for cast iron. The tolerance class M ensures consistent seat fit and repeatable positioning in standard toolholders, which reduces rework and fixture adjustments on the shop floor. Versatile application across turning and boring operations Classified for cast iron workpieces, the grade WKK10S is a coated carbide solution optimised for abrasive wear and frequent short-chip formation. The insert is suitable for both turning and boring set-ups where reliable chip flow and stable cutting forces are required. In production environments the insert’s design supports straightforward integration into common toolholders and boring heads used in machining centres and lathes, allowing shops to standardise tooling across similar cast iron operations. Practical handling and performance guidance For best results, pair the insert with tool geometries and feeds matched to cast iron characteristics: medium cutting speeds and steady feed rates produce the intended chip shape and promote consistent wear. The Tiger·tec Silver technology improves thermal resistance and edge stability, which lowers tooling costs per component in longer runs. If application parameters require fine-tuning, consult the technical documentation or our specialists for recommended speed and feed windows tailored to specific cast iron grades. Contact Metav Werkzeuge for application-specific recommendations and secure delivery of Walter Tools inserts — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Details SKU: CCMT09T304-RK4-WKK10S-WALTER Article designation: CCMT09T304-RK4 WKK10S Manufacturer: Walter Tools Product type: drilling/boring and turning indexable insert Series: Tiger·tec Silver Core Data Clearance angle: 7° Corner radius: 0.4 mm Insert shape: Rhombic 80° Insert size: 09 Thickness: T3 Tolerance class: M Special features Grade: WKK10S (coated carbide) Chipbreaker: RK4 Optimised for: cast iron machining Suitable operations: turning and boring FAQ Which workpiece materials is this grade suitable for? The WKK10S grade and the CCMT09T304-RK4 WKK10S insert are optimised for cast iron; the coating and chipformer address abrasive wear and short-chip behaviour typical of these materials. How does the chipbreaker affect machining of cast iron? The RK4 chipbreaker on the CCMT09T304-RK4 WKK10S insert directs and fractures chips efficiently, reducing the risk of entanglement and improving process stability in cast iron turning and boring. What insert geometry and edge preparation does it have? This insert features a rhombic 80° shape with a 0.4 mm corner radius and a 7° clearance, balancing edge strength and accessibility for interrupted cuts. Is the insert suitable for both turning and boring setups? Yes, the CCMT09T304-RK4 WKK10S is specified for drilling/boring and turning operations and fits common toolholders used in lathes and machining centres. What does the Tiger·tec Silver designation mean for performance? Tiger·tec Silver denotes Walter Tools’ coating and substrate technology that enhances thermal resistance and edge stability, helping to extend tool life under abrasive cast iron conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
CCMT09T304-RK4 WKK20S RK4 Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, cast iron-optimised grade and a consistent chip control that reduces rework and extends tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. CCMT09T304-RK4 WKK20S indexable turning insert – Tiger-tec Silver, RK4 chipbreaker by Walter Tools The CCMT09T304-RK4 WKK20S is a coated carbide turning insert designed for productive cast iron machining with stable chip formation and long tool life Optimised for cast iron machining Tiger-tec Silver coated carbide grade RK4 chipbreaker for short, controlled chips Rhombus 80° geometry for versatile turning Consistent results on abrasive cast iron components The Tiger-tec Silver coating combined with the WKK20S grade is formulated to resist the abrasive wear typical of cast iron. This results in a clearly extended tool life and a more predictable wear pattern, which benefits batch production and tight-tolerance runs. The RK4 chipbreaker is tailored for the short, brittle chips produced by grey and nodular cast iron, reducing the risk of chip entanglement and improving surface integrity. In practical terms, these characteristics mean fewer interruptions for tool changes and a more stable process window, which supports higher throughput and consistent surface finish on critical diameters. Geometry and edge specification for accurate finishing The Rhombus 80° insert form and the 7° clearance angle combine to offer a reliable cutting geometry for general turning and finishing operations. The small 0.4 mm corner radius supports fine edge finishes and modest approach depths while preserving edge strength for repeatable results. With a compact T3 thickness and the established CCMT09T304-RK4 outline, the insert suits standard tool holders and clamping systems used in lathes and turning centres, enabling straightforward retrofit into existing tool inventories. The designation reflects a balance between robustness and the ability to achieve close tolerances on components where form and surface quality are decisive. Operational advantages: process safety and inventory efficiency Specifying a grade optimised for cast iron machining reduces scrap and rework. The WKK20S carbide offers a universal toughness level that copes with fluctuating cast iron microstructures while the coating minimises adhesion and flank wear. The tolerance class M ensures consistent dimensions between indexable edges, aiding rapid re-indexing and predictable cycle times. For purchasing and stock management, the standardised form factor and compatibility with widely used holders simplify logistics and reduce downtime. Overall, the insert supports a cost-effective machining strategy through lower tooling consumption per part and a reliable, repeatable cutting performance. Select the Walter Tools Tiger-tec Silver grade for demanding cast iron turning — contact Metav Werkzeuge for tailored recommendations and immediate availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: CCMT09T304-RK4-WKK20S-WALTER Designation: CCMT09T304-RK4 WKK20S Series: Tiger-tec Silver Grade: WKK20S Manufacturer: Walter Tools Facts Plate form: Rhombus 80° Plate size: 09 Plate thickness: T3 Corner radius: 0.4 mm Free angle: 7° Chipbreaker: RK4 Tolerance class: M Special features Coated carbide grade optimised for cast iron Stable chip formation for short, breaking chips Productive wear resistance and consistent edge life Suitable for turning and boring applications on cast iron FAQ What materials is this insert suitable for? The CCMT09T304-RK4 WKK20S insert is optimised for machining cast iron; the WKK20S grade and chipbreaker geometry are tuned to abrasive, short-chip behaviour typical of these materials. How does the RK4 chipbreaker improve machining? The RK4 chipbreaker controls chip form for short, easily managed chips in cast iron turning, reducing chip-related interruptions and improving surface quality with consistent cutting forces. Can this insert be used for finishing operations? Yes, the small 0.4 mm corner radius and Rhombus 80° geometry make the insert suitable for light finishing cuts where surface integrity and dimensional accuracy are required. Is the CCMT09T304-RK4 compatible with standard tool holders? The CCMT-shaped insert and standard size designation mean it fits most conventional tool holders for indexable turning, allowing easy replacement and inventory harmonisation. What process benefits does the Tiger-tec Silver coating provide? The Tiger-tec Silver coating enhances wear resistance and reduces built-up edge tendencies on cast iron, delivering longer tool life and more predictable performance in production environments. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools: The Walter AG (brand: Walter Tools) is part of the Sandvik Group and is a leading manufacturer of precision metalworking tools. Protected trademarks and product names are the property of their respective owners. The mentioned brand names are used for explanation only. There is no affiliation between Metav Werkzeuge and the named manufacturers. The offered item is original, factory-new goods of the manufacturer.
CCMT09T304-RM4 WMP20G RM4 Wendeplatten - Walter Tools
Combining the Tiger‑tec Gold grade with a robust RM4 chipbreaker and a 0.4 mm corner radius ensures secure chip formation and consistent edge life in demanding stainless steel turning. Order the CCMT09T304-RM4 WMP20G directly via Metav Werkzeuge or ask the Metav consultants for material‑specific recommendations. CCMT09T304-RM4 · CCMT09T304-RM20G WMP20G — Rhombic 80° turning insert for stainless steel, Tiger‑tec Gold, Walter Tools A CCMT09T304-RM4 WMP20G is a rhombic 80° turning insert developed for medium to robust machining conditions on stainless steel, providing stable cutting performance with Tiger‑tec Gold coating. Tiger‑tec Gold coated carbide grade WMP20G Optimised for stainless steel machining Rhombic 80° shape, 0.4 mm corner radius Greater throughput through coated‑grade performance The Tiger‑tec Gold coated carbide formulation combines wear resistance with thermal stability to maintain a stable cutting edge under the challenging conditions of machining stainless steel. This results in more predictable tool life and fewer interruptions for index changes, which improves overall shop throughput. The combination of the WMP20G grade and the RM4 chipbreaker promotes secure chip control, reducing the risk of built‑up edge that typically degrades surface finish and cycle time. Geometry that improves surface quality and process reliability The rhombic 80° geometry paired with a 0.4 mm corner radius and a 7° clearance provides a balanced contact area for turning operations. A defined corner radius supports smoother transitions and better load distribution on the cutting edge, which translates to improved surface finish and reduced micro‑chipping. The RM4 chipbreaker shapes chips for stable evacuation, lowering the chance of entanglement and easing handling. For those unfamiliar, the corner radius is the small rounded edge at the insert tip that influences strength and finish: larger radii increase strength but may raise cutting forces, while the 0.4 mm radius here offers a pragmatic compromise for stainless steels. Practical selection and application advice for shop environments The insert is supplied in the CCMT09T304 format with a T3 thickness and size designation 09, making it compatible with standard turning toolholders that accept rhombic 80° indexable inserts. Its specification for the ISO M group confirms suitability for stainless steel grades that generate toughness and heat; the coating reduces adhesion and extends edge life. When integrating this insert into production, select cutting parameters that mitigate heat build‑up—moderate cutting speeds and steady feed—so the coated grade can deliver its full potential. Walter Tools’ emphasis on process reliability supports consistent results across batch and single‑piece production. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger‑tec Gold inserts and to check stock availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: CCMT09T304-RM4-WMP20G-WALTER Designation: CCMT09T304-RM4 ISO designation: CCMT09T304-RM4 WMP20G Grade: WMP20G Series: Tiger‑tec Gold Manufacturer: Walter Tools Facts Shape: Rhombus 80° Corner radius: 0.4 mm Clearance angle: 7° Insert size: 09 Thickness: T3 Chipbreaker: RM4 Special features Coated carbide Suited for stainless steel (ISO M) Designed for medium to robust cutting conditions Rhombic 80° insert geometry Walter Tools brand FAQ What materials is this insert best suited for? The CCMT09T304-RM4 WMP20G is optimised for stainless steel (ISO M), with the Tiger‑tec Gold coating and RM4 chipbreaker specifically designed to manage the toughness and heat sensitivity of these alloys. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker on this Walter Tools insert shapes chips for reliable evacuation and reduces the likelihood of built‑up edge, improving surface finish and enabling more stable machining cycles. Can the insert be used for finishing operations? Yes, the combination of a 0.4 mm corner radius and controlled geometry permits good surface quality; however, finishing parameters should be selected with lower feeds and appropriate speeds for best results. Which toolholder types accept the CCMT09T304 format? Standard turning toolholders designed for rhombic 80° indexable inserts with CCMT format are compatible; ensure the holder supports the 09 size and T3 thickness for correct seating. What benefit does the Tiger‑tec Gold series provide? Tiger‑tec Gold enhances wear resistance and thermal stability, offering extended edge life and consistent cutting performance when machining demanding materials such as stainless steel. The Walter AG (brand: Walter Tools) is part of the Sandvik Group. Protected trademarks and trade names are mentioned for explanatory purposes only. There is no affiliation implied between our company and the mentioned brands. The listed article is an original, factory‑new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CCMT09T304-RM4 WMP20S RM4 Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating, a precise 0.4 mm corner radius and the RM4 chipbreaker for dependable machining of stainless steel; these features deliver stable chip formation and extended tool life. Order the CCMT09T304-RM4 WMP20S insert directly via Metav Werkzeuge or consult our specialists for application advice. CCMT09T304-RM4 WMP20S – Rhombic 80° indexable turning insert for stainless steel, Tiger·tec Silver (Walter Tools) The CCMT09T304-RM4 WMP20S is a rhombic 80° indexable turning insert designed for machining stainless steel under medium to robust cutting conditions. CCMT09T304-RM4 WMP20S by Walter Tools Tiger·tec Silver coated carbide 7° clearance angle, Rhombus 80° form 0.4 mm corner radius, RM4 chipbreaker Consistent performance for stainless steel turning The coated carbide grade delivers a balance between wear resistance and edge strength. The Tiger·tec Silver technology improves thermal resistance and supports stable chip formation, which reduces the risk of built-up edge when machining stainless steel (ISO group M). As a result, process reliability is increased and interruptions for tool changes are less frequent, which benefits throughput and cost per part. The insert’s design prioritises steady cutting behaviour in demanding environments. Geometry that enhances surface quality and repeatability The rhombic 80° form combined with a 7° clearance angle and a 0.4 mm corner radius produces predictable cutting forces and improved surface finish on turned components. The RM4 chipbreaker is tuned to promote short, manageable chips in many stainless grades, helping to avoid entanglement and tool damage. With a nominal T3 thickness and standard CCMT footprint, the component enables secure clamping in compatible tool holders and contributes to consistent, repeatable results across batches. Lower tooling costs through longer life and fewer interventions The coated grade and robust edge geometry work together to extend effective tool life. Fewer indexings and less downtime for insert changes mean higher productivity on lathes and turning centres. The combination of wear-resistant coating and optimised chip control translates into measurable savings on consumables and machine time, making the insert an economical choice for series production and maintenance-friendly operations. Application scope and practical guidance Engineered primarily for stainless steel applications, the insert performs well under medium to robust cutting regimes where heat and ductility challenge the cutting edge. The designation WMP20S signals a coated carbide solution intended to support secure machining of ISO group M materials. For uncertain or specialised applications, technical consultation is recommended to match insert geometry and grade to the workpiece grade and machining strategy. Contact Metav Werkzeuge today for availability and application support for the CCMT09T304-RM4 WMP20S insert from Walter Tools Technical Data Article number: CCMT09T304-RM4-WMP20S-WALTER Description: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCMT09T304-RM4-RM4 WMP20S Walter Tools Manufacturer: Walter Tools Core data Clearance angle: 7° Corner radius: 0.4 mm Insert size: 09 Thickness: T3 Form: Rhombus 80° Design & Features Grade: WMP20S Series: Tiger·tec Silver Chipbreaker: RM4 Coated carbide construction Suitable for: stainless steel (ISO group M) FAQ Which materials is this insert suitable for? The CCMT09T304-RM4 WMP20S insert is designed primarily for stainless steel (ISO group M) and performs under medium to robust cutting conditions. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating increases thermal stability and wear resistance, supporting longer tool life and more consistent cutting performance on tough, heat-generating stainless steels. How does the RM4 chipbreaker influence machining? The RM4 chipbreaker promotes controlled chip formation that reduces the risk of long, stringy chips and supports secure evacuation, improving process safety and surface quality during turning. Is the insert compatible with standard CCMT tool holders? The insert uses the CCMT geometry and rhombic 80° form, making it compatible with conventional holders designed for CCMT inserts; correct seating and clamping in the tool holder are essential for repeatable results. What effect does the 0.4 mm corner radius have on the workpiece? A 0.4 mm corner radius balances edge strength and surface finish: it helps absorb cutting shocks and extends edge life while still producing acceptable surface quality for many turned components. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original factory-new goods of the manufacturer.
CCMT09T304-RM4 WMP30G WMP30G Wendeplatten - Walter Tools
High-performance Tiger‑tec Gold coated carbide for dependable chip control and prolonged tool life; combines the WMP30G grade with an RM4 chipbreaker and rhombic 80° geometry for stable turning of rostfreier Stahl. Order directly via Metav Werkzeuge or consult the technical team for application advice. CCMT09T304-RM4 WMP30G — Indexable turning insert, rhombic 80°, Tiger‑tec Gold (Walter Tools) The CCMT09T304-RM4 WMP30G is a rhombic 80° indexable insert designed for productive turning of rostfreier Stahl in medium to robust machining conditions Tiger‑tec Gold coating for long tool life Optimised chip control with RM4 chipbreaker Rhombic 80° geometry for versatile turning Suitable for rostfreier Stahl applications Consistent performance where heat and adhesion are a challenge The coated carbide grade WMP30G, part of the Tiger‑tec Gold family, is formulated to resist wear and maintain a stable cutting edge when machining rostfreier Stahl. The coating enhances thermal stability and reduces adhesive wear, which translates into longer tool life and fewer interruptions for insert changes. For production-focused shops this results in a more predictable process window and improved overall equipment effectiveness through longer tool cycles and reduced scrap. Geometry engineered for accuracy and process stability The rhombic 80° profile combined with a 0.4 mm corner radius and a 7° clearance angle gives a balance between cutting strength and edge sharpness. This geometry supports reliable chip formation and surface finish while allowing consistent turning across a range of diameters. The RM4 chipbreaker is tuned to evacuate swarf efficiently in tougher stainless conditions, reducing the risk of built-up edge and improving surface integrity on the workpiece. Practical benefits for workshop productivity As an indexable insert, the component reduces setup time and tooling cost compared with solid carbide alternatives. The T3 thickness and the stable insert form provide repeatable seating in standard toolholders, enabling quick index changes and minimal machine downtime. Combined with the WMP30G coating, the insert offers a cost‑effective balance between durability and cutting performance, making it suitable for frequent batch production and demanding turning tasks. Application advice and compatibility The insert is intended primarily for rostfreier Stahl and similar, tough alloys that demand secure chip control and thermal resilience. The insert seat and ISO designation align with common turning toolholders for straightforward integration into existing tooling systems. For process optimisation, pair the insert with stable clamping and adjust feeds to encourage chip breakage by the RM4 geometry; Metav Werkzeuge can offer guidance on matching insert, holder and cut‑strategy for best results. Contact Metav Werkzeuge today for tailored recommendations on integrating this Walter Tools indexable insert into production or to request machining data for specific rostfreier Stahl grades Technical data SKU: CCMT09T304-RM4-WMP30G-WALTER Article designation: CCMT09T304-RM4 WMP30G Manufacturer: Walter Tools Series: Tiger‑tec Gold Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Facts Clearance angle: 7° Corner radius: 0.4 mm Insert size: 09 Thickness: T3 Geometry: Rhombus 80° Special features Coated carbide grade WMP30G Chipbreaker: RM4 Suitable for rostfreier Stahl ISO designation included in article name FAQ What materials is this insert best suited for? The CCMT09T304-RM4 WMP30G insert is optimised for rostfreier Stahl and similar stainless alloys, where the Tiger‑tec Gold coating and RM4 chipbreaker help manage adhesion and heat. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker promotes controlled chip formation under higher temperatures typical of stainless machining, reducing built‑up edge and improving surface finish with the WMP30G grade. Can this insert be used in standard turning holders? Yes, the rhombic 80° form and ISO designation are compatible with common indexable toolholders; ensure correct clamping and orientation for repeatable performance. What are the main advantages of the Tiger‑tec Gold coating? Tiger‑tec Gold increases thermal resistance and wear protection, yielding longer tool life and more consistent cutting behaviour in demanding turning operations. Is this insert suitable for automated production runs? The combination of coated carbide, RM4 chip control and repeatable geometry makes the insert well suited to production environments that require stable cycles and predictable tool life. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
CCMT09T304-RM4 WSM10S RM4 Wendeplatten - Walter Tools
Take advantage of a convincing combination of high-temperature resistance, stable chip control and reliable edge life for demanding turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CCMT09T304-RM4 WSM10S turning/boring indexable insert — Tiger·tec Silver, Walter Tools A CCMT09T304-RM4 WSM10S indexable insert designed for turning and boring applications on rostfreier Stahl and heat-resistant superalloys, providing robust performance where thermal and material demands are high Tiger·tec Silver coating for heat resistance Optimised RM4 chipbreaker for stable chip control Suitable for rostfreier Stahl and superalloys Rhombic 80° shape with 0.4 mm corner radius Consistent performance in demanding materials The combination of the Tiger·tec Silver coating and the WSM10S carbide grade delivers a measurable advantage when machining rostfreier Stahl and superalloys: improved heat resistance and a durable cutting edge reduce flank and crater wear under elevated temperatures. The RM4 chipbreaker is engineered to produce controllable chips even when cutting sticky or ductile materials, which helps to avoid workpiece damage and machine downtime. This results in a predictable tool life and contributes to higher overall productivity in series production. Geometry that stabilises cutting and surface finish The rhombic 80° configuration, together with a 0.4 mm corner radius and a 7° free angle, offers a balance between edge strength and form versatility. The Rhombic 80° shape facilitates both plunge and light turning operations, while the moderate corner radius supports consistent surface quality on challenging parts. The insert’s T3 thickness and standard tolerance class M provide dimensional stability during index changes, reducing vibration and ensuring repeatable component quality. Practical application and process advantages As an indexable insert within the Tiger·tec Silver series, this grade is particularly suited to components produced from rostfreier Stahl and heat-resistant alloys that demand reliable chip control and thermal stability. The robust chip control characteristic of the RM4 geometry reduces secondary operations and cleaning time, which benefits throughput and cost per part. Where tool change frequency and process security matter, the insert’s predictable wear behaviour supports scheduled maintenance strategies and consistent output. Manufacturer competence and workplace confidence Produced by a recognised cutting-tool manufacturer, the insert benefits from established production standards and material science behind the WSM10S grade. The focus on stable chip formation and optimised coating technology means fewer interruptions in high-mix environments and a reduction in scrap rates. For operations requiring reproducible results on demanding materials, this solution offers both technical reliability and economic sense. For machining rostfreier Stahl and superalloys with a focus on thermal stability and chip control, contact Metav Werkzeuge to discuss the CCMT09T304-RM4 WSM10S insert, its suitable geometries and matching toolholders — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number / SKU: CCMT09T304-RM4-WSM10S-WALTER Designation: CCMT09T304-RM4 WSM10S Manufacturer: Walter Tools Facts Free angle: 7° Corner radius: 0.4 mm Plate size: 09 Plate thickness: T3 Shape: Rhombic 80° Special features Series: Tiger·tec Silver Grade: WSM10S (coated carbide) Chipbreaker: RM4 Suitable materials: S / M (superalloys / rostfreier Stahl) Tolerance class: M Execution: T FAQ What materials is this insert intended for? The insert is specified for machining rostfreier Stahl and heat-resistant superalloys; the WSM10S grade and Tiger·tec Silver coating support thermal stability and controlled chip formation. How does the RM4 chipbreaker affect process reliability? The RM4 geometry improves chip control in ductile and cohesive materials, which enhances process stability and reduces the risk of built-up edge on the cutting insert. Which cutting angles and geometries are recommended for finishing? The rhombic 80° layout with a 0.4 mm corner radius offers a compromise between strength and surface finish; for finer finishes, select a smaller nose radius where the tool system and holder permit. Is the insert suitable for both turning and boring operations? Yes—the form and tolerance class make it appropriate as an indexable insert for turning and light boring tasks in applications involving rostfreier Stahl and difficult-to-machine alloys. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are used for explanatory purposes only. There is no affiliation between our company and the listed brands. The offered item is an original, factory-new product of the manufacturer.
CCMT09T304-RM4 WSM20S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a robust WSM20S grade and the RM4 chipbreaker for stable edge life and consistent chip control; this reduces downtime and supports uninterrupted production. Order the insert directly via Metav Werkzeuge or request advice from their technical consultants. CCMT09T304-RM4 WSM20S – Turning insert, Tiger·tec Silver coating, RM4 chipbreaker (Walter Tools) The CCMT09T304-RM4 WSM20S is a rhombic 80° indexable turning insert designed for heavy machining of rostfreier Stahl and heat‑resistant alloys, combining a wear‑resistant grade with a geometry for secure cutting action Tiger·tec Silver coated carbide grade WSM20S Optimised for rostfreier Stahl and superalloys RM4 chipbreaker for consistent chip control Rhombic 80° geometry with 7° relief Consistent performance in demanding materials The combination of the WSM20S grade and the Tiger·tec Silver coating delivers improved edge stability under thermal and mechanical stress. Intended for tough applications involving rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), the insert’s coated carbide composition helps to limit built‑up edge and to maintain cutting capability at elevated temperatures. For shops aiming to reduce insert changes, this results in fewer interruptions and more predictable component quality. Reliable chip control and process security Built around the RM4 chipbreaker, the geometry promotes short, controllable chips for interrupted or continuous turning. The rhombic 80° shape and 7° relief balance cutting edge engagement and tool strength, while the 0.4 mm corner radius supports improved surface finish and reduced edge chipping. These parameters combine to provide secure chip control and steady cutting forces, which in turn simplifies process planning and results in consistent workpiece quality. Efficient integration and handling for productive machining The insert’s T3 thickness and CCMT format ensure compatibility with standard indexable turning toolholders, enabling quick index changes and repeatable setup. Marked by a coated grade developed for difficult‑to‑cut materials, the design supports higher material removal rates where tool life predictability is essential. For process planning, the insert is a practical choice when machining rostfreier Stahl and superalloys; Metav Werkzeuge can advise on holder selection and cutting parameters to match production goals. Discuss machining strategy for the CCMT09T304-RM4 WSM20S with Metav Werkzeuge's specialists: eMail info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and application support. Technical Data Article number: CCMT09T304-RM4-WSM20S-WALTER Designation: CCMT09T304-RM4 WSM20S Brand: Walter Tools Grade: WSM20S Series: Tiger·tec Silver Core data Geometry: Rhombic 80° Relief angle: 7° Corner radius: 0.4 mm Thickness: T3 Plate size: 09 Chipbreaker: RM4 Tolerance class: M Special features Coating technology: Tiger·tec Silver Material: coated carbide Suitable for: rostfreier Stahl (M), superalloys and titanium (S) Application: heavy‑duty machining of difficult‑to‑cut alloys Manufacturer: Walter Tools FAQ Which materials is this insert suited for? The CCMT09T304-RM4 WSM20S is optimised for rostfreier Stahl and for heat‑resistant superalloys and titanium (ISO groups M and S), providing secure chip formation and edge stability in these materials. What is the advantage of the RM4 chipbreaker? The RM4 chipbreaker on this Walter Tools insert produces short, controllable chips and consistent cutting forces, supporting safer machining and improved surface quality. How does the Tiger·tec Silver coating help? The Tiger·tec Silver coating enhances thermal resistance and wear protection on the WSM20S grade, extending tool life when machining tough materials and reducing the frequency of index changes. Is the insert compatible with standard turning holders? Yes; the CCMT format and T3 thickness are compatible with conventional indexable turning holders designed for rhombic 80° inserts, enabling straightforward integration into existing tooling systems. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with its headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Mention of brand names serves explanatory purposes only and does not imply any affiliation between our company and the trademark owners. The offered article is an original, factory‑new product of the named manufacturer.
CCMT09T304-RM4 WSM30S RM4 Wendeplatten - Walter Tools
Take advantage of a highly wear‑resistant Tiger·tec Silver grade and a proven RM4 chipbreaker for secure chip flow and consistent edge life; the combination ensures stable machining of stainless steels and heat‑resistant alloys and supports uninterrupted production. Order the CCMT09T304‑RM4 WSM30S directly via Metav Werkzeuge or contact the specialists for further process recommendations. CCMT09T304‑RM4 WSM30S — Rhombic 80° indexable insert, RM4 chipbreaker, Walter Tools The CCMT09T304‑RM4 WSM30S is a rhombic 80° indexable insert designed for bored and turned components, optimised for machining stainless steels and heat‑resistant superalloys under demanding conditions. High‑temperature stability for tough alloys Optimised RM4 chipbreaker for secure chips Tiger·tec Silver coating for wear resistance Rhombic 80° form with 7° clearance Greater process security for stainless and superalloy machining The combination of the WSM30S grade and the Tiger·tec Silver technology delivers enhanced thermal and wear resistance compared with conventional grades. This insert’s coated carbide composition is engineered to resist the adhesive tendencies and rapid heat generation typical of stainless steels and nickel‑based alloys, reducing the risk of built‑up edge and premature flank wear. The outcome is a more predictable cutting edge life and fewer unplanned tool changes, which supports steady production flow and consistent part quality. Predictable chip control that reduces interruptions Machining ductile or heat‑resistant materials often leads to troublesome chip forms; the RM4 chipbreaker geometry is developed to shape and control chips for stable evacuation. Improved chip control minimises manual chip clearing and reduces the incidence of surface damage to the workpiece, thereby shortening cycle interruptions and improving operational efficiency. This geometry is particularly effective where secure chip segmentation and guided evacuation are required during continuous turning or boring operations. Geometry designed for strength and surface quality The rhombic 80° insert form paired with a 0.4 mm corner radius and 7° clearance angle balances edge strength with fine surface generation. The selected corner radius supports robust cutting edge stability at interrupted cuts and moderate depths of cut, while the 80° form provides versatile engagement for both facing and cylindrical turning tasks. Plate size 09 and thickness T3 ensure a compact footprint with sufficient support for boring and turning applications in medium to heavy machining cycles. Integration into production and tool management As a Walter Tools component from the Tiger·tec Silver series, this insert fits established toolholders that accept CCMT‑style geometries and is straightforward to index during maintenance. The clear material designation and the RM4 chipbreaker simplify process planning for stainless steels and superalloys, allowing procurement and toolroom staff to standardise on a grade that covers a wide range of demanding alloys. For specific application matching or to discuss toolholder compatibility, Metav Werkzeuge provides technical consultation and additional data sheets on request. For tailored recommendations on using Walter Tools inserts for stainless steels and superalloys, contact Metav Werkzeuge to request process data or assistance with selecting the optimal insert geometry and grade. Technical data Article number: CCMT09T304-RM4-WSM30S-WALTER Designation: CCMT09T304-RM4 WSM30S Grade / series: WSM30S, Tiger·tec Silver Manufacturer: Walter Tools Core technical values Clearance angle: 7° Corner radius: 0.4 mm Insert form: Rhombic 80° Insert size: 09 Thickness: T3 Tolerance class: M Special features and applications Chipbreaker: RM4 Material composition: coated carbide Suitable for: stainless steels (M), heat‑resistant superalloys and titanium (S) Typical applications: turning and boring indexable insert Series characteristics: Tiger·tec Silver for thermal and wear resistance FAQ Is this insert suitable for stainless steels and when should it be preferred? The CCMT09T304‑RM4 WSM30S is specifically formulated for stainless steels, offering thermal stability and reliable chip control that make it a preferred choice for ductile, work‑hardening alloys. What advantages does the Tiger·tec Silver technology provide? Tiger·tec Silver enhances wear resistance and heat shielding on the cutting edge of the WSM30S grade, which contributes to longer edge life and improved process stability when machining demanding materials. How does the RM4 chipbreaker affect machining results? The RM4 chipbreaker produces controlled chip forms that ease evacuation and reduce the risk of entanglement or surface damage, resulting in fewer stoppages and more consistent surface quality. Can this insert be used for both turning and boring operations? Yes; the rhombic 80° form and the specified dimensions make the insert versatile for both turning and boring tasks where a CCMT geometry is applicable. What is the recommended corner radius for interrupted cuts with this insert? The 0.4 mm corner radius offers a balance between edge strength and finish and is suitable for operations that combine moderate depths of cut with occasional interruptions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original factory‑new goods of Walter Tools.
CCMT09T304-RP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and an RP4 chipbreaker for reliable chip control and extended tool life; the insert is optimised for turning and boring of steel and supports consistent, productive machining. Order the CCMT09T304-RP4 WPP10G directly via Metav Werkzeuge or consult the team for application advice. CCMT09T304-RP4 WPP10G indexable turning and boring insert, Tiger·tec Gold coating, Walter Tools The CCMT09T304-RP4 WPP10G is an indexable insert designed for precision turning and boring of steel, combining a Tiger·tec Gold coating with an RP4 chipbreaker for stable, productive cutting. Tiger·tec Gold coated carbide grade WPP10G RP4 chipbreaker optimised for steel machining Rhombic 80° shape with 0.4 mm corner radius 7° relief angle for versatile cutting Higher uptime through a wear-resistant coating The combination of a Tiger·tec Gold surface treatment and a coated carbide base provides improved wear resistance under the typical heat and strain of steel machining. This grade, identified as WPP10G, is formulated for ISO P applications and covers a wide range of steel types from demanding, wear-prone tasks to more universal conditions. The result is longer tool life and fewer insert changes, which reduces non-productive time and contributes to a more predictable production flow. For operators seeking process stability, the coating technology offers measurable benefits in repeatability and edge retention. Controlled chips and consistent surface quality The RP4 chipbreaker has been engineered to control chip formation during turning and boring operations in steel, delivering smaller, manageable chips and reducing the risk of surface damage. Combined with the rhombic 80° geometry and a 0.4 mm corner radius, the insert enables good surface finishes in both light finishing and medium cutting passes. The modest 7° relief angle supports versatility across different cutting depths and feeds, helping maintain edge stability while avoiding excessive cutting forces. This technical mix translates into consistent part quality and reduced rework. Productivity benefits in everyday workshop use By matching a robust insert geometry with a modern coating, this indexable solution is targeted at production environments where efficiency and repeatable results matter. The grade allocation within the Tiger·tec Gold family means the insert performs across varying steel grades and cutting conditions, offering reliable cycle times and reduced tooling costs per part. Where machining throughput and uptime are priorities, the insert’s specifications support more aggressive feeds without sacrificing component quality, helping to improve overall process economics. Fit, handling and system compatibility The CCMT format and the designation CCMT09T304-RP4 indicate a standard clamping and orientation familiar to most turning toolholders, simplifying stocking and changeover. The plate thickness T3, size 09 and the CCMT form factor ensure straightforward replacement and secure seating in compatible toolholders. Clear labelling and standard dimensions reduce the risk of assembly errors and support consistent set-up times across shifts. For workshops integrating this insert into multi-shift operations, the combination of standard geometry and robust coating aids predictable performance. Contact Metav Werkzeuge for a machining recommendation or to specify the CCMT09T304-RP4 WPP10G for your next production batch; experienced consultants are available to discuss cutting parameters and application suitability. Technical data Article number: CCMT09T304-RP4-WPP10G-WALTER Designation: CCMT09T304-RP4 WPP10G Type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.4 mm Insert size: 09 Plate thickness: T3 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: RP4 Shape: Rhombic 80° Execution: T Material group: P (suitable for steel) ISO designation: CCMT09T304-RP4 WPP10G FAQ What materials is this insert best suited for? The WPP10G grade and the CCMT09T304-RP4 geometry are optimised for steel (ISO P); this insert is formulated to handle the heat and chip formation typical of turning and boring steel. Can the insert be used for finishing passes? Yes, the rhombic 80° shape with a 0.4 mm corner radius supports finishing and light to medium cutting tasks while maintaining surface quality. How does the RP4 chipbreaker improve machining? The RP4 chipbreaker promotes controlled chip formation in steel applications, reducing the risk of entanglement and improving surface consistency during turning and boring. Is the CCMT09T304-RP4 WPP10G compatible with standard toolholders? The CCMT form and size 09 follow common industry standards, allowing compatibility with a wide range of turning toolholders designed for CCMT inserts. What advantages does the Tiger·tec Gold series provide? Tiger·tec Gold coating enhances edge durability and wear resistance, which contributes to longer tool life and steadier production processes under variable cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are used for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The article offered is original, brand-new goods from the manufacturer.
CCMT09T304-RP4 WPP20G WPP20G Wendeplatten - Walter Tools
Reliable machining performance is achieved through the combination of the Tiger·tec Gold coating and the RP4 chipbreaker, delivering extended tool life and consistent chip control for steel turning; order the insert directly via Metav Werkzeuge or consult our technical team for application-specific cutting data. CCMT09T304-RP4 WPP20G — Turning indexable insert, Tiger·tec Gold, Walter Tools The CCMT09T304-RP4 WPP20G is a coated carbide turning insert engineered for productive machining of steel in general turning operations and finishing passes. Tiger·tec Gold coating for extended tool life Optimised RP4 chipbreaker for reliable chip control Rhombic 80° shape with 0.4 mm corner radius Designed for steel (ISO P) machining Consistent performance in steel turning The coated WPP20G grade, part of the Tiger·tec Gold family, is formulated for the thermal and mechanical demands of steel machining. Its combination of a wear-resistant coating and a robust substrate results in stable cutting behaviour and predictable flank wear, which reduces the need for frequent insert changes. For applications where process reliability and repeatable part quality matter, this turning grade reduces downtime by maintaining cutting-edge integrity over longer tool life cycles. Precise chip control and surface quality An RP4 chipbreaker is integrated to manage chips effectively under typical steel cutting conditions, promoting continuous, controllable chips that prevent entanglement and workpiece damage. The rhombic 80° geometry, coupled with a 0.4 mm corner radius, supports fine surface finishes and dimensional stability in finishing and medium-depth turning. As a result, cycle times can be optimised without compromising surface integrity, and rework is reduced thanks to consistent chip evacuation. Machine and process economy through longer life By combining coating technology with optimised edge preparation, the insert achieves improved wear resistance and lower flank-load sensitivity. This translates into fewer tool changes and a reduced tooling cost per part, which is particularly advantageous in high-volume production. The economic benefit is evident in extended intervals between indexing and lower tool stock levels required to sustain a production run, aiding predictable production planning. Compatibility and application guidance The insert is designated for ISO P applications and is therefore suited to unalloyed and alloyed steels. The CCMT09T304-RP4 geometry supports common turning tool holders designed for rhombic 80° inserts and a T3 plate thickness. When integrating into existing tool setups, consider feed and speed adjustments to exploit the Tiger·tec Gold coating fully; recommended cutting parameters can be provided for specific steel grades to balance tool life and productivity. For process-oriented recommendations and to obtain cutting-data tailored to Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge and request our application guidance and optimisation support: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: CCMT09T304-RP4-WPP20G-WALTER Designation: CCMT09T304-RP4 WPP20G Type: Turning indexable insert (drill/bore and turning compatible) Manufacturer: Walter Tools Grade: WPP20G Series: Tiger·tec Gold Facts Clearance angle: 7° Corner radius: 0.4 mm Insert size: 09 Plate thickness: T3 Tolerance class: M Special features Chipbreaker: RP4 Coating: Tiger·tec Gold (coated carbide) Applicable material group: P (steel) Shape: Rhombic 80° Execution: T FAQ What steels is this insert suitable for? The CCMT09T304-RP4 WPP20G is designed for ISO P materials and is suitable for unalloyed and alloyed steels, offering reliable performance across the typical steel machining spectrum. How does the RP4 chipbreaker affect machining? The RP4 chipbreaker on this insert controls chip formation for improved evacuation and reduced entanglement, which supports safer, more productive turning cycles with better surface quality. Can this insert be used for finishing passes? Yes, the rhombic 80° geometry with a 0.4 mm corner radius is suitable for finishing and light-medium turning operations where surface finish and dimensional control are priorities. What distinguishes the WPP20G grade within Tiger·tec Gold? WPP20G is a balanced Walter Tools grade within the Tiger·tec Gold family, offering a combination of wear resistance and toughness specifically optimised for steel machining applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product from the manufacturer.
CCMT09T304-RP4 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of cost-effective durability, consistent chip control and broad Stahl capability for stable production runs; the coated grade and RP4 chipbreaker keep tool changes to a minimum. Order the CCMT09T304-RP4 WPP30G directly via Metav Werkzeuge or ask our consultants if needed. CCMT09T304-RP4 WPP30G — Turning/boring indexable insert, Tiger‑tec Gold, Walter Tools The CCMT09T304-RP4 WPP30G is a rhombic 80° indexable insert designed for turning and boring applications in Stahl, providing robust edge life and reliable chip formation under typical steel machining conditions Tiger·tec Gold coating for extended tool life RP4 chipbreaker for controlled chip formation Rhombic 80° geometry for versatile turning 7° clearance angle for secure cutting engagement Maximise productivity on Stahl with a Tiger‑tec Gold grade The coated grade WPP30G combines a modern Tiger·tec Gold technology with a wear-resistant substrate to deliver predictable performance when machining Stahl components. Designed to suit the ISO P group, this insert balances hardness and toughness so that cutting edge life is extended without sacrificing process stability. The result is fewer tool changes, less downtime and a more economical machining cycle for medium to high-volume turning operations. The coating assists at elevated skin temperatures typical of steel turning and supports improved surface finish consistency. Predictable chip control and surface quality from RP4 and geometry The integrated RP4 chipbreaker has been configured for stable chip segmentation and safe evacuation across common Stahl grades. With a 0.4 mm corner radius and the Rhombus 80° form, the insert provides a compromise between strength at the cutting edge and achievable surface quality; sharper radii improve surface finish while the 0.4 mm radius increases edge robustness where interrupted cuts occur. The tolerance class M ensures repeatable seating and interchangeability in standard toolholders, helping to maintain consistent part quality during batch production. Process reliability through measured geometry and standard thickness A clearance angle of 7° and a plate thickness of T3 contribute to secure insert seating and predictable cutting forces during turning cycles. The CCMT designation combined with the RP4 chipformer means proven compatibility with widely used toolholders for both finishing and light-medium roughing tasks. The insert’s specification supports a straightforward toolset-up and rapid redeployment in mixed production lines, reducing setup times and simplifying inventory handling for tooling managers seeking robust and ready-to-use solutions. For application advice or to secure supply of Walter Tools Tiger‑tec Gold inserts like the CCMT09T304-RP4 WPP30G, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical support and delivery Technical Data Article number: CCMT09T304-RP4-WPP30G-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCMT09T304-RP4 WPP30G Walter Tools Brand: Walter Tools Designation: CCMT09T304-RP4 ISO designation: CCMT09T304-RP4 WPP30G Facts Clearance angle: 7° Corner radius: 0.4 mm Plate size: 09 Plate thickness: T3 Geometry: Rhombus 80° Tolerance class: M Special features Coating / Series: Tiger‑tec Gold Grade: WPP30G Chipbreaker: RP4 Material group suitability: P (Stahl) Execution: T Wendeplatte ISO designation included: CCMT09T304-RP4 WPP30G FAQ What materials is this insert best suited for? The CCMT09T304-RP4 WPP30G is optimised for the ISO P group and is particularly suited to machining a wide range of Stahl grades, offering balanced wear resistance and toughness. How does the RP4 chipbreaker affect machining? The RP4 chipbreaker on this Walter Tools insert promotes controlled chip segmentation and evacuation, reducing the risk of entanglement and improving process reliability during continuous turning. Can the insert be used for finishing and roughing? With a 0.4 mm corner radius and the Rhombus 80° geometry, this insert covers light-medium roughing and finishing operations, providing a versatile solution for mixed production demands. What does the Tiger‑tec Gold series deliver in practice? Tiger‑tec Gold coating enhances temperature resistance and wear behaviour, which translates into longer edge life and fewer tool changes when machining Stahl under typical industrial conditions. Is the CCMT09T304-RP4 WPP30G interchangeable in standard toolholders? Yes; the CCMT form and tolerance class M ensure compatibility with common clamping systems, enabling straightforward insert replacement and consistent seating accuracy. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT09T308 WPP20G E47 Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coated WPP20G grade and the precise rhombic 80° geometry with a 0.8 mm nose radius and 7° clearance for stable chip formation and consistent component finish; the design supports efficient steel machining with reduced downtime. Order the product directly via Metav Werkzeuge or ask our consultants if needed. CCMT09T308-E47 WPP20G – drilling/bore indexable insert, Tiger·tec Gold grade for steel by Walter Tools A CCMT09T308-E47 WPP20G insert engineered for precision drilling and boring in steel components, offering a balanced mix of wear resistance and toughness for general-purpose and demanding production environments. Tiger·tec Gold coating for longer life Optimised E47 chipformer for chip control Rhombic 80° geometry for versatile entry 0.8 mm nose radius for consistent surface Durable grade engineered for steel productivity The coated carbide WPP20G grade from the Tiger·tec Gold family delivers a targeted balance between wear resistance and toughness, specifically adjusted for ISO P applications (steel). Its coating technology reduces flank wear and improves thermal stability, which translates into longer service intervals and fewer tool changes during batch production. By selecting this grade, workshops gain a reliable cutting edge that copes with the heat and chip characteristics typical of unalloyed and alloyed steels, improving process reproducibility and lowering overall machining costs per component. Precision geometry that improves surface quality and tool life The rhombic 80° insert shape combined with a 0.8 mm nose radius and 7° clearance provides controlled engagement and predictable cutting forces during drilling and boring operations. The geometry supports secure insert seating and consistent chip flow, while the modest nose radius helps achieve stable surface finish without excessive tool load. Tolerance class M signals a manufacturing precision that assures repeatable positioning and interchangeability in toolholders, reducing setup times and ensuring consistent part quality across production runs. Chip control and process security for efficient production An E47 chipformer engineered into the insert flank promotes controlled chip breakage and evacuation in typical steel cutting scenarios, lowering the risk of built-up edge or interrupted cutting. The overall package—coating, chipformer and grade—fosters stable chip formation and a robust cutting edge, which benefits cycle-time-sensitive operations. In practical terms, this means fewer interrupted cuts, less scrap, and improved throughput. The insert’s construction and grade selection reflect Walter Tools’ emphasis on productivity and consistent tool life in industrial metalworking. For tailored recommendations on integrating Walter Tools Tiger·tec Gold inserts into existing tool setups, contact Metav Werkzeuge for technical advice and supply options. Technical data SKU: CCMT09T308-E47-WPP20G-WALTER Label: Bohr-/Aufbohrwendeschneidplatte CCMT09T308-E47 WPP20G Walter Tools Manufacturer: Walter Tools Product type: drilling/bore indexable insert Core specifications Clearance: 7° Nose radius: 0.8 mm Insert size: 09 Thickness: T3 Geometry: Rhombic 80° Tolerance class: M Designs and special features Grade: WPP20G (Tiger·tec Gold coated carbide) Chipformer: E47 Material suitability: steel (ISO P) Series: Tiger·tec Gold FAQ Which materials is this insert suitable for? The CCMT09T308-E47 WPP20G insert is designed for machining steel (ISO P); the WPP20G grade and Tiger·tec Gold coating are optimised for the heat and chip behaviour typical of unalloyed and alloyed steels. What does the E47 chipformer do in practice? The E47 chipformer on this insert promotes controlled chip breaking and evacuation in steel cutting, improving process security and reducing the risk of chip-related interruptions during drilling and boring. How does the rhombic 80° geometry affect machining? Rhombic 80° geometry gives versatile entry angles and stable cutting engagement, which helps achieve consistent surface quality and reliable tool seating for boring and drilling operations. Is this insert suitable for finishing or roughing operations? With a 0.8 mm nose radius and the balanced WPP20G grade, the insert is suitable for general finishing and medium material removal in steel; selection should be matched to the specific application requirements and machining parameters. Can this insert be used in standard indexable drill or boring heads? The CCMT09T308-E47 WPP20G designation indicates an indexable insert format compatible with toolholders designed for CCMT inserts; check holder compatibility and mounting orientation before assembly. Manufacturer/Responsible: Walter Tools (Walter AG, brand of Walter Tools; part of Sandvik). Protected trademarks and product names are the property of their respective owners. Mention of brand names is for explanation only; there is no affiliation between our company and the brands. The offered item is original, brand-new production of the manufacturer.
CCMT09T308-E47 WPP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WPP20S carbide grade for consistently stable chip formation and long tool life; the CCMT geometry and 0.8 mm corner radius ensure reliable cutting performance in steel machining. Order directly via Metav Werkzeuge or consult the team for application-specific recommendations. CCMT09T308-E47 WPP20S drilling/boring indexable insert by Walter Tools — Tiger·tec Silver, rhombic 80° CCMT09T308-E47 WPP20S offers a versatile insert for drilling and bore-enlarging applications in steel, combining coated carbide grade performance with a proven CCMT geometry for secure clamping and predictable cutting behaviour Tiger·tec Silver coating for durability Grade WPP20S tuned for steel machining Rhombic 80° geometry for versatile clamping 0.8 mm corner radius for stable cutting High-performance grade engineered for steel productivity The WPP20S grade, part of the Tiger·tec Silver family, is a coated carbide formulation optimised for machining steel. Its microstructure and coating balance wear resistance and toughness so that the insert handles the typical heat and chip form of steel cutting. This results in longer tool life and fewer insert changes, which improves throughput and reduces unplanned downtime. The grade is categorised as universally applicable within steel machining, giving dependable performance across a range of cutting conditions. Geometry and edge preparation that stabilise cutting results The rhombic 80° form with the CCMT-style pocket designation provides secure seating and repeatable orientation in standard toolholders. The 0.8 mm corner radius reduces edge chipping risk while offering a compromise between edge strength and finishing capability. Combined with a modest 7° relief angle, this geometry supports stable cutting forces during drilling or bore enlargement, improving dimensional consistency and reducing the risk of vibration-related marks on workpieces. Coating technology that extends service intervals The Tiger·tec Silver coating is engineered to improve thermal stability and adhesion on the carbide substrate. This layered surface helps resist abrasive wear and built-up edge formation under the thermal loads typical of steel machining. Fewer interruptions for insert changeover translate into higher effective machine utilisation and an improved cost-per-component metric. The coating also contributes to consistent surface quality over longer tool life, supporting production runs where repeatable finish is required. Chip control and operational advantages for shop-floor efficiency The integrated E47 chipbreaker is designed to manage chip formation during drilling and reaming operations, promoting short, controllable swarf that evacuates reliably from the bore. Better chip control reduces the likelihood of recutting chips or tool breakage and facilitates safer high-feed cycles. Together with the coated grade and robust geometry, the insert supports efficient, predictable machining cycles that aid process planning and reduce the need for corrective rework. Contact Metav Werkzeuge for tailored machining advice on Walter Tools Tiger·tec Silver inserts or request specific cutting data and compatible toolholder recommendations by phone or email Technical data Article number: CCMT09T308-E47-WPP20S-WALTER SKU: CCMT09T308-E47-WPP20S-WALTER Designation: CCMT09T308-E47 WPP20S Product type: Drilling/boring indexable insert Brand: Walter Tools Series: Tiger·tec Silver Grade: WPP20S Facts Relief angle: 7° Corner radius: 0.8 mm Insert form: Rhombus 80° Insert size: 09 Chipbreaker: E47 Thickness: T3 Tolerance class: M Special features Coated carbide grade Optimised for steel (P) Stable chip formation Reliable wear resistance Suitable for drilling and bore-enlarging operations FAQ What materials is this insert intended for? The CCMT09T308-E47 WPP20S insert is optimised for machining steel and is specified for the P material class according to ISO recommendations. How does the Tiger·tec Silver coating benefit production runs? The Tiger·tec Silver coating on the WPP20S grade improves wear resistance and thermal stability, which extends insert life and supports consistent surface quality during longer production runs. Can the insert be used in standard CCMT toolholders? Yes, the CCMT09T308-E47 form follows CCMT geometry and is compatible with standard CCMT-compatible toolholders designed for rhombic 80° inserts. What role does the E47 chipbreaker play? The E47 chipbreaker shapes chip flow for controlled, short chips during drilling and bore enlargement, improving evacuation and reducing recutting risks. Is the insert suitable for finishing or roughing operations? With a 0.8 mm corner radius and coated carbide grade, the insert provides a balance between edge strength and surface finish; it performs well in medium to finishing cuts where stability and repeatable results are required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not imply any association with our company. The offered item is original factory-new merchandise from the manufacturer.
CCMT09T308-E47 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of a combination of thermal stability, reliable chip control and robust edge integrity for consistent performance in demanding materials; order through Metav Werkzeuge or consult our specialists for process-matched selection and application advice. CCMT09T308-E47 WSM20S Drilling/boring indexable insert — Tiger·tec Silver grade (Walter Tools) A CCMT09T308-E47 WSM20S indexable insert designed for drilling and boring applications in hard-to-machine materials and stainless steel Tiger·tec Silver coated for high thermal resistance Optimised E47 chipbreaker for stable chips Rhombic 80° geometry for versatile engagement 0.8 mm corner radius for enhanced edge strength High-performance cutting in demanding alloys The Tiger·tec Silver grade WSM20S delivers improved heat resistance and wear behaviour when machining stainless steels and high-temperature alloys. The coated carbide construction supports a stable cutting edge under elevated temperatures, reducing flank wear and the risk of built-up edge. Thanks to the E47 chipbreaker and the Rhombic 80° form, the insert controls chip flow during drilling and boring, lowering the likelihood of clogging and enabling smoother evacuation of swarf. This results in more predictable cycle times and fewer interrupted operations. Process security and extended tool life A combination of a 7° relief angle and a 0.8 mm corner radius offers robustness at the cutting edge, helping to withstand the high cutting forces typical for heat-resistant materials. The Walter grade focuses on secure chip formation and consistent edge stability, which translates into fewer insert changes and less machine downtime. The design supports reproducible results across batches, improving overall process reliability and reducing the total cost per hole over longer production runs. Practical selection and machining guidance For roughing and medium-finishing operations in alloys categorised as ISO groups M (stainless steels) and S (superalloys, titanium), choose the WSM20S grade to balance wear resistance and toughness. The Rhombic 80° geometry permits flexible cutting conditions and variable approach angles commonly used in drill- and bore-related toolholders. When pairing with the appropriate drill body or boring bar, the insert’s chip control features support stable cutting at moderate to high feeds; this reduces vibration and aids surface integrity without complex process changes. Speak with Metav Werkzeuge to specify the optimal Walter Tools CCMT insert for the application and secure consistent results in stainless and heat-resistant alloys Technical Data SKU: CCMT09T308-E47-WSM20S-WALTER Designation: CCMT09T308-E47 Full designation: CCMT09T308-E47 WSM20S Product type: Drilling/boring indexable insert Core data Relief angle: 7° Corner radius: 0.8 mm Insert size: 09 Plate form: Rhombus 80° Plate thickness: T3 Tolerance class: M Features Grade: WSM20S (Tiger·tec Silver coated carbide) Chipbreaker: E47 Series: Tiger·tec Silver Workpiece groups: S / M (superalloys/titanium, stainless steels) Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The CCMT09T308-E47 WSM20S is specified for ISO groups M and S, meaning it is suitable for stainless steels and heat-resistant superalloys or titanium where thermal resistance and edge stability are required. How does the E47 chipbreaker affect drilling performance? The E47 chipbreaker on this Walter Tools insert promotes controlled chip formation and evacuation during drilling and boring, which reduces clogging and supports steady cutting forces for improved process security. What cutting conditions favour the WSM20S grade? WSM20S performs well at moderate to high cutting temperatures and is recommended for roughing to medium finishing in tough-to-machine materials; its coated carbide composition balances wear resistance with toughness. Is the 0.8 mm corner radius suitable for finishing? The 0.8 mm radius provides edge robustness and is well suited to stable cutting where surface integrity is important; for very fine finishes a smaller radius may be chosen if available in the system. Which series does this insert belong to and what does that mean? This insert is part of the Tiger·tec Silver series by Walter Tools, indicating a coated carbide concept engineered for enhanced thermal stability and consistent tool life in demanding applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not indicate any affiliation between Metav Werkzeuge and the trademark owners.
CCMT09T308-E47 WSM30S T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and a compact Rhombic 80° geometry with E47 chipformer to ensure secure chip control and reproducible performance in demanding drilling and boring operations; order directly via Metav Werkzeuge or request technical advice from the consultants. CCMT09T308-E47 WSM30S drilling/boring indexable insert by Walter Tools — Tiger·tec Silver for rostfreier Stahl and superalloys CCMT09T308-E47 WSM30S is a precision indexable insert designed for demanding drilling and boring applications in hard-to-machine materials Tiger·tec Silver coating for heat resistance and edge stability Optimised E47 chipformer for consistent chip control Suitable for rostfreier Stahl and heat-resistant alloys Rhombic 80° form with 0.8 mm corner radius High-performance coating for demanding materials The combination of the WSM30S grade and the Tiger·tec Silver coating provides a clear advantage when machining materials that generate high temperatures and tend to work-harden. This coated carbide grade is formulated to support stable chip formation and preserve the cutting edge under thermal load, which contributes to longer usable tool life and fewer interruptions in production. The specification explicitly targets ISO groups M (rostfreier Stahl) and S (heat-resistant superalloys and titanium), so the material behaviour and the required heat resistance are addressed at the cutting-material level. For workshops that prioritise consistent machining of difficult alloys, the thermal and mechanical properties of this grade are decisive for process reliability. Geometry and chip control for reproducible results The Rhombic 80° insert shape combined with the E47 chipformer and 0.8 mm corner radius results in controlled chip breakage and stable cutting forces during drilling and boring cycles. A 7° clearance angle and T3 thickness ensure mechanical rigidity in the pocket and reliable indexability; the geometry is chosen to balance cutting-edge strength and accessibility for bore work. Improved chip control reduces the risk of built-up edge and improves surface finish, while the stable edge prolongs service intervals. Technical clarification and machining recommendations can be obtained from Metav Werkzeuge for integration into existing tooling systems and cycle parameter selection. Productivity and predictable performance in series production This insert supports a productive machining strategy: reliable chip evacuation and a robust cutting edge lower scrap rates and machine downtime, which in turn improves overall machining efficiency. The CCMT09T308-E47 designation denotes a compact, indexable solution that is easy to handle in automated tool management systems and suited to batch production. Specifying a grade and geometry that match the workpiece class limits process variation and enables repeatable results across tool changes. For production planners and process engineers, the primary benefit is a reduction in process variability combined with the proven metallurgy and coating technology of a recognised manufacturer. Contact Metav Werkzeuge for delivery schedules and application-specific recommendations on Walter Tools Tiger·tec Silver inserts Technical data Article number: CCMT09T308-E47-WSM30S-WALTER Designation: CCMT09T308-E47 Insert grade: WSM30S Series: Tiger·tec Silver Chipformer: E47 Geometry: Rhombic 80° Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Clearance (free) angle: 7° Thickness: T3 Insert size: 09 Tolerance class: M Execution: T3 form Materials & features Coating: Tiger·tec Silver (coated carbide) Suitable material groups: M (rostfreier Stahl), S (heat-resistant superalloys and titanium) Application: drilling / boring indexable insert Optimised for stable chip formation and edge retention Compact rhombic form for improved accessibility FAQ What materials is this insert intended for? The CCMT09T308-E47 WSM30S insert is specified for ISO groups M (rostfreier Stahl) and S (heat-resistant superalloys and titanium), offering heat resistance and edge stability for these materials. How does the E47 chipformer benefit machining? The E47 chipformer on this Walter Tools insert promotes consistent chip breakage and evacuation, which leads to fewer interruptions and improved surface quality in drilling and boring tasks. Which geometry details are most important for setup? Key geometry data are the Rhombic 80° form, 0.8 mm corner radius and 7° clearance; these determine insert accessibility, cutting-edge strength and pocket clamping requirements for stable operation. Is this insert suitable for automated tool systems? The compact CCMT09T308-E47 designation and standardised form factor make the insert compatible with automated tool management and indexable-insert programmes from major toolholders. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Markennamen wie Walter Tools werden ausschließlich zu Erklärungszwecken genannt.
CCMT09T308-FK6 WKK10S Wendeplatten - Walter Tools
Combine the Tiger·tec Silver coating with the FK6 chipbreaker and a 0.8 mm corner radius for robust, long-life performance when machining cast iron; order the CCMT09T308-FK6 WKK10S directly via Metav Werkzeuge or contact our consultants for tailored application advice. CCMT09T308-FK6 WKK10S Drilling/Boring & Turning indexable insert – Tiger·tec Silver, for cast iron, Walter Tools A CCMT09T308-FK6 WKK10S is a multi-purpose indexable insert designed for drilling, boring and light turning in cast iron components, combining a coated carbide grade with a chipforming geometry optimised for ISO K materials. Tiger·tec Silver coating for wear resistance Optimised for cast iron machining (ISO K) FK6 chipbreaker for controlled chip formation Rhombic 80° shape with 0.8 mm corner radius High-productivity grade for abrasive cast iron work The combination of Tiger·tec Silver technology and the WKK10S grade delivers excellent wear resistance and consistent edge life when facing the abrasive nature of cast iron. The coated carbide is engineered to withstand frequent micro-abrasion and the short, breaking chips typical of cast materials, which means fewer tool changes and more productive machining cycles. This results in a measurable increase in process uptime and predictable maintenance intervals for batch production. Geometry tuned for reliable chip control and surface quality The FK6 chipbreaker is designed to produce controlled chips in grey and nodular cast iron, reducing the risk of clogging and improving swarf ejection in both drilling and turning operations. The rhombic 80° orientation together with a 0.8 mm corner radius and 7° relief provides a balance between edge strength and cutting accuracy, while the T3 thickness ensures stable clamping in common indexable insert holders. The result is lower cutting forces and improved surface finish with repeatable results across multiple parts. Practical integration and process benefits for workshops This insert is suitable for versatile use in combined drilling/boring and light turning applications where cast iron is the principal workpiece material. The standardised CCMT geometry simplifies toolholder selection and spare-parts logistics. By choosing this grade and geometry, workshop managers gain a consistent, efficient solution that cuts downtime and supports stable production planning. If clarification on holder compatibility or recommended cutting parameters is required, Metav Werkzeuge provides application support and technical advice to assist process optimisation. For reliable cast iron machining with Walter Tools' Tiger·tec Silver grade, contact Metav Werkzeuge for expert guidance and prompt supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CCMT09T308-FK6-WKK10S-WALTER Designation: CCMT09T308-FK6 WKK10S Brand: Walter Tools Facts Relief angle: 7° Corner radius: 0.8 mm Plate form: Rhombus 80° Plate size: 09 Thickness: T3 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKK10S (coated carbide) Chipbreaker: FK6 Application: Cast iron (ISO K) FAQ Is this insert suitable for all cast iron types? The CCMT09T308-FK6 WKK10S is optimised for ISO K materials and performs well on common cast irons; suitability for specific alloys should be checked against machining conditions. Can the insert be used for finish turning as well as drilling operations? Yes, the insert’s rhombic 80° geometry and 0.8 mm corner radius allow light turning and finishing when used in appropriate toolholders. What benefits does the Tiger·tec Silver coating provide? Tiger·tec Silver on the WKK10S grade enhances wear resistance and tool life under the abrasive conditions typical of cast iron machining. How does the FK6 chipbreaker affect chip control? The FK6 geometry produces short, controllable chips in grey and nodular cast iron, improving swarf evacuation and reducing the risk of chip entanglement. Which holders fit the CCMT09T308-FK6 insert? Standard CCMT indexable insert holders compatible with rhombic 80° CCMT inserts are suitable; check holder specifications for thickness T3 and clamping requirements. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are cited for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, factory-new goods from the manufacturer.
CCMT09T308-FK6 WKK20S Wendeplatten - Walter Tools
A robust solution for cast-iron machining: the combination of the Tiger·tec Silver coating and the WKK20S grade delivers long tool life and stable wear behaviour, while the FK6 chipbreaker ensures reliable chip control and less downtime. Order the insert directly via Metav Werkzeuge or consult the team for application advice. CCMT09T308-FK6 WKK20S drilling/turning indexable insert — Tiger·tec Silver, for cast iron CCMT09T308-FK6 WKK20S is an indexable insert engineered for efficient drilling, reaming and turning in cast iron applications, combining a coated carbide grade with a specialised chipbreaker and versatile rhombic geometry Tiger·tec Silver coating for extended tool life Optimised FK6 chipbreaker for reliable chip control Designed for cast iron machining (ISO K) Rhombic 80° geometry with 0.8 mm corner radius High productivity through advanced coating and grade The combination of the Tiger·tec Silver coating and the WKK20S carbide grade is engineered to extend tool life and maintain consistent cutting-edge performance in abrasive materials. This coated hardmetal grade is tuned for the specific wear patterns encountered when machining cast iron, reducing flank and crater wear and stabilising cutting performance over longer production runs. The result is fewer tool changes and a more predictable process window, which supports higher overall equipment effectiveness and lower unit costs. Controlled chip formation for safer, continuous operation Integrated with an FK6 chipbreaker, the cutter pocket geometry promotes short, broken chips typical of grey and ductile cast irons, which assists chip evacuation and reduces the risk of entanglement. The optimised chip control lowers heat concentration at the cutting edge and improves surface consistency, making the insert particularly suitable where clean chip flow and stable machining are required. This leads to improved cycle reliability and easier machine handling in continuous or automated production. Geometry and edge preparation that add flexibility The rhombic 80° insert form offers a versatile approach to a range of turning and boring tasks, combining a stable seating in toolholders with accessibility in confined or stepped profiles. A 0.8 mm corner radius provides a balance between edge strength and surface finish, while the 7° clearance angle helps to reduce rubbing and avoid notch formation at the cutting edge. The T3 plate thickness and the size code 09 ensure mechanical rigidity for interrupted cuts and moderate depths of cut without compromising accuracy. Ready for integration in standard toolholders and production lines Produced to tolerance class M, the insert fits common CCMT toolholder systems and can be indexed to use multiple cutting edges, improving cost-per-edge economy. The CCMT09T308-FK6 WKK20S insert supports a focused tool inventory strategy for cast-iron work, allowing straightforward replacement and minimal set-up adjustments. Its stable wear characteristics and chip control contribute to consistent part quality and reduced cycle variability, supporting leaner operations and predictable throughput. Contact Metav Werkzeuge to discuss how the CCMT09T308-FK6 WKK20S insert can optimise cast-iron machining in your process and to arrange supply or technical consultation — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: CCMT09T308-FK6-WKK20S-WALTER SKU: CCMT09T308-FK6-WKK20S-WALTER Product type: drilling/reaming and turning indexable insert Grade: WKK20S Series: Tiger·tec Silver Facts Free angle: 7° Corner radius: 0.8 mm Plate form: Rhombic 80° Plate size: 09 Plate thickness: T3 Tolerance class: M Special features Chipbreaker: FK6 Coating technology: Tiger·tec Silver (coated carbide) Material application: cast iron (ISO K) Designation: CCMT09T308-FK6 WKK20S FAQ What materials is this insert intended for? The CCMT09T308-FK6 WKK20S insert is designed primarily for cast iron machining (ISO K), with the WKK20S grade optimised for abrasive wear and short, breaking chips. How does the FK6 chipbreaker benefit production? The FK6 chipbreaker provides reliable short-chip formation in cast-iron applications, improving chip evacuation and reducing the risk of chip entanglement during continuous turning or drilling operations. Is the insert compatible with standard CCMT toolholders? Yes, the insert follows the CCMT geometry and, produced to tolerance class M, is compatible with common CCMT toolholders for easy integration and indexing. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating enhances wear resistance and heat management at the cutting edge, which extends tool life and stabilises machining performance on abrasive cast-iron materials. Can this insert be used for interrupted cuts and roughing? With a 0.8 mm corner radius and a robust plate thickness, the insert provides mechanical rigidity suitable for interrupted cuts and moderate roughing in cast iron. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanation; there is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
CCMT09T308-FM4 WMP20G FM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a dedicated WMP20G carbide grade and the FM4 chipbreaker for consistent chip control and extended tool life; order the CCMT09T308-FM4 WMP20G directly via Metav Werkzeuge or consult the team for application advice. CCMT09T308-FM4 WMP20G rhombic 80° indexable insert for stainless steel, Walter Tools The CCMT09T308-FM4 WMP20G is a rhombic indexable turning and boring insert engineered for reliable machining of stainless steels under medium to robust cutting conditions. CCMT09T308-FM4 WMP20G insert, Tiger·tec Gold Optimised for stainless steel machining (ISO M) FM4 chipbreaker for secure chip control Rhombic 80° shape with 0.8 mm nose radius Durable carbide grade that secures stable cutting in stainless steels The combination of the WMP20G grade with the Tiger·tec Gold coating delivers a coated carbide solution optimised for the typical challenges of machining stainless steels (ISO M). The microstructure and coating chemistry are tuned to reduce built-up edge and to support stable chip formation, which translates directly into longer cutting edge life and fewer unplanned interruptions. In practice, this means more predictable batch runs and improved process reliability when turning or boring corrosion-resistant alloys, especially where toughness and heat generation would otherwise shorten tool life. Geometry and chip control that improve surface finish and reproducibility The insert’s rhombic 80° platform, combined with a 0.8 mm nose radius and 7° clearance, provides a balance of cutting strength and versatility for profile and finishing passes. The FM4 chipbreaker is tailored for stainless applications and ensures consistent chip segmentation and evacuation under varying cutting parameters. The insert thickness T3 and the CCMT form give mechanical stability at the cutting edge, reducing vibration and helping to achieve a repeatable surface roughness while protecting the cutting edge from thermal and mechanical overload. Greater process security and economical series machining Designed for medium to robust conditions, this indexable insert contributes to higher process security and measurable gains in productivity: fewer tool changes, stable cutting forces and improved component finish. The consistent edge maintenance provided by the grade and geometry supports predictable tool life, simplifying production planning and reducing scrap risk. As part of Walter Tools’ Tiger·tec Gold family, the insert is suited to environments where repeatable performance and reliable chip control are priorities, offering a practical route to lower cost per component in serial production. Contact Metav Werkzeuge for tailored cutting data, delivery options and genuine Walter Tools inserts via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: CCMT09T308-FM4-WMP20G-WALTER Description: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCMT09T308-FM4 WMP20G Manufacturer: Walter Tools Carbide grade: WMP20G (Tiger·tec Gold) Facts Insert size: 09 Shape: Rhombus 80° Nose radius: 0.8 mm Free angle: 7° Thickness: T3 Special features Series: Tiger·tec Gold Chipbreaker: FM4 Execution: T Tolerance class: M Suitable for: stainless steels (ISO M) FAQ What materials is this insert designed for? The CCMT09T308-FM4 WMP20G is specified for stainless steels (ISO M) and performs reliably under medium to robust cutting conditions. How does the FM4 chipbreaker help in practice? The FM4 chipbreaker improves chip control and evacuation during turning, which reduces the risk of entanglement and supports consistent surface quality with this Walter Tools insert. Which geometry benefits finishing operations? The rhombic 80° shape together with a 0.8 mm nose radius and 7° clearance achieves a balance between strength and finish capability for both profiling and light finishing passes. Is this insert suitable for interrupted cuts or unstable setups? Thanks to the insert thickness T3 and the robust WMP20G grade, the design increases mechanical stability and is more tolerant of tougher conditions than standard grades. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the mentioned brands. The offered article is an original, factory-new product of Walter Tools.
CCMT09T308-FM4 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WMP20S grade for reliable performance in stainless-steel turning and boring; the FM4 chipbreaker and rhombic 80° geometry deliver stable chip control and consistent surface quality. Order the CCMT09T308-FM4 WMP20S directly via Metav Werkzeuge or consult our specialists for application-specific advice. CCMT09T308-FM4 WMP20S – Rhombic 80° indexable insert for stainless-steel turning (Walter Tools) CCMT09T308-FM4 WMP20S is a rhombic 80° indexable insert designed for turning and boring operations on stainless steel, combining a coated carbide grade with an FM4 chipbreaker for secure chip formation. Tiger·tec Silver coating for longer tool life Optimised FM4 chipbreaker for stable chip flow Designed for stainless steel machining Rhombic 80° shape with 0.8 mm corner radius Consistent performance for stainless-steel machining The CCMT09T308-FM4 WMP20S combines the Tiger·tec Silver coating with the WMP20S grade to tackle the specific challenges of stainless steel: toughness, tendency to form built-up edge and high heat generation. The coated carbide substrate is engineered to support safe chip formation under medium to robust conditions, reducing the risk of premature edge breakdown. The result is a dependable cut that maintains dimensional stability and reduces unscheduled tool changes, supporting uninterrupted production cycles. Improved chip control and surface finish A dedicated FM4 chipbreaker paired with the rhombic 80° geometry and a 0.8 mm corner radius ensures predictable chip formation and evacuation. The moderate corner radius offers a balance between strength and finish, helping to produce consistent surface quality while prolonging insert life. The 7° clearance angle optimises engagement with the workpiece and mitigates rubbing, contributing to lower cutting forces and improved thermal behaviour during continuous turning operations. Practical application and process guidance This insert is primarily suited to machining stainless steel and is intended for turning and boring tasks where reliability and reproducible results are required. The T3 plate thickness and standard CCMT form make it compatible with common toolholders for indexable inserts; correct clamping and recommended cutting parameters will further enhance performance. For process optimisation—such as selecting feed rates or finishing strategies—the combination of the FM4 chipbreaker and Tiger·tec Silver technology provides a stable basis for achieving repeatable results across batch and single-part production. For tailored cutting strategies or availability of the CCMT09T308-FM4 WMP20S from Walter Tools, contact Metav Werkzeuge for expert consultation and fast supply—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CCMT09T308-FM4-WMP20S-WALTER Product designation: CCMT09T308-FM4 WMP20S Product type: Drilling/boring indexable insert / turning indexable insert Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.8 mm Insert size: 09 Thickness: T3 Shape: Rhombus 80° Tolerance class: M Series: Tiger·tec Silver Special features Grade: WMP20S Chipbreaker: FM4 Coated carbide (beschichtetes Hartmetall) Suitable material: stainless steel Execution: T FAQ What materials is this insert suited for? The CCMT09T308-FM4 WMP20S insert is specified for stainless steel machining and is optimised for medium to robust cutting conditions. How does the FM4 chipbreaker benefit the process? The FM4 chipbreaker on this Walter Tools indexable insert promotes controlled chip formation and evacuation, reducing the risk of entanglement and improving surface consistency. Can this insert be used for both turning and boring? Yes, the rhombic 80° geometry and T3 thickness make the insert suitable for a range of turning and boring applications where a balanced edge strength and finish are required. What advantage does the Tiger·tec Silver series provide? The Tiger·tec Silver coating enhances thermal resistance and wear performance on coated carbide grades, supporting longer tool life and steady cutting behaviour in demanding stainless-steel operations. How does the 0.8 mm corner radius affect results? A 0.8 mm radius offers increased edge stability compared with smaller radii, helping to extend insert life while maintaining an acceptable surface finish for general turning tasks. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanation only. There is no connection between our company and the mentioned brands. The offered item is an original, brand-new product of the manufacturer.
CCMT09T308-FM4 WSM01 FM4 Wendeplatten - Walter Tools
Take advantage of the combination of WSM01 coated carbide in the Tiger‑tec Silver series and the FM4 chipbreaker for reliable chip control when machining stainless steels and heat‑resistant alloys; order the CCMT09T308-FM4 WSM01 directly via Metav Werkzeuge or consult the technical advisors for application-specific recommendations. CCMT09T308-FM4 WSM01 — Indexable insert for turning and boring, Tiger‑tec Silver (Walter Tools) A CCMT09T308-FM4 WSM01 is a coated carbide indexable insert designed for turning and boring operations, optimised for stainless steels and heat‑resistant superalloys in demanding production environments. Tiger‑tec Silver, WSM01 coated carbide Optimised FM4 chipbreaker for stable chips Rhombic 80° geometry, 0.8 mm corner radius Suitable for stainless steels and superalloys High‑performance grade for difficult‑to‑cut alloys The WSM01 grade from the Tiger‑tec Silver series is a coated carbide formulation engineered for materials that challenge conventional tooling. Its composition balances wear resistance and thermal stability, which helps maintain a stable cutting edge when machining stainless steels and heat‑resistant alloys. In practical terms, this means fewer insert changes during long runs and more predictable component quality — a direct gain in machine uptime and process reliability. Chip control that improves cycle times and safety Equipped with the FM4 chipbreaker, the insert promotes short, controllable chips and reduced risk of built‑up edge. The chip control design lowers the chance of entanglement and enhances coolant penetration, supporting higher effective cutting parameters without compromising tool life. These characteristics translate into measurable efficiency: more consistent material removal and fewer interruptions for chip clearing, which benefits throughput and operator safety. Geometry tuned for surface quality and edge strength The rhombic 80° shape combined with a 0.8 mm corner radius and 7° clearance achieves a balance between edge strength and surface finish. The corner radius supports interrupted cuts and higher feed rates, while the clearance angle reduces rubbing and heat generation at the flank. The result is improved consistent surface finish and repeatable dimensional control, especially in parts where finish and tolerance are critical. Robust design and shop‑floor compatibility With a plate thickness of T3 and the ISO designation CCMT09T308-FM4, the insert fits common turning toolholders and is suitable for standard clamping systems. The coated surface treatment of the Tiger‑tec Silver series enhances resistance to abrasion and thermal loading, supporting longer life in serial production. For operations working across stainless and high‑temperature alloys, this insert provides a dependable combination of performance and handling efficiency. For machining tasks that require secure chip control and stable performance on stainless steels and superalloys, contact Metav Werkzeuge for tailored advice or to arrange supply of Walter Tools inserts — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: CCMT09T308-FM4-WSM01-WALTER SKU: CCMT09T308-FM4-WSM01-WALTER ISO designation: CCMT09T308-FM4 WSM01 Numerical data Corner radius: 0.8 mm Clearance angle: 7° Plate size: 09 Plate thickness: T3 Geometry: Rhombic 80° Design and special features Series: Tiger‑tec Silver Grade: WSM01 (coated carbide) Chipbreaker: FM4 Execution: T Tolerance class: M Applicable material groups: S, M Suitable for rostfreier Stahl FAQ Which materials are best machined with this insert? The CCMT09T308-FM4 WSM01 insert is suited for stainless steels and heat‑resistant superalloys; the WSM01 grade supports stable chip formation and edge life in these groups. What benefit does the FM4 chipbreaker provide? The FM4 chipbreaker on the Walter Tools insert produces short, controllable chips, improving coolant access and reducing built‑up edge, which supports uninterrupted machining. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength for interrupted cuts and allows higher feed rates while helping to maintain surface quality on challenging materials. Is this insert compatible with standard turning holders? Yes, the CCMT09T308-FM4 designation and T3 thickness make the insert compatible with common turning toolholders designed for CCMT geometry. What makes the Tiger‑tec Silver series advantageous? The Tiger‑tec Silver coating improves abrasion resistance and thermal stability, resulting in longer tool life and consistent performance across serial production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT09T308-FM4 WSM10S T Wendeplatten - Walter Tools
Take advantage of the combination of stable edge life, Tiger·tec Silver coating and controlled chip formation for consistent results when machining stainless steels and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or ask the consultants for application advice. CCMT09T308-FM4 WSM10S indexable insert — Walter Tools, Tiger·tec Silver, Rhombus 80°, 0.8 mm radius The CCMT09T308-FM4 WSM10S is an indexable turning and boring insert designed for demanding machining of rostfreie Stähle and heat‑resistant superalloys, featuring the Tiger·tec Silver coating and an FM4 chipbreaker for secure chip control Tiger·tec Silver coating for longer tool life FM4 chipbreaker for controlled chips and surface finish Rhombus 80° geometry for versatile turning applications 0.8 mm nose radius for improved edge strength High reliability from coating and grade The combination of the Tiger·tec Silver coating and the WSM10S grade delivers improved wear resistance and thermal stability during interrupted cuts and continuous turning. The coating reduces flank wear and helps maintain a stable cutting edge when machining rostfreie Stähle and heat‑resistant alloys, which are prone to work hardening and high cutting temperatures. As a result, tool life is extended and machining runs with fewer insert changes, supporting predictable production cycles and lower tooling downtime. Precise chip control for safer production Equipped with the FM4 chipbreaker, this insert produces short, manageable chips under a wide range of cutting conditions. The chip control geometry reduces the risk of entanglement and scatter, improving operator safety and simplifying chip evacuation in automated and manual turning operations. Controlled chips also contribute to a consistent surface finish, reducing the need for secondary processing and supporting efficient downstream workflows. Geometry and edge design for productivity The Rhombus 80° form with a 0.8 mm corner radius balances strength and versatility: it allows secure entry angles for general turning while maintaining edge robustness during interrupted cuts. The 7° clearance angle minimises rubbing and helps prevent excessive heat generation at the flank face. Together, these geometric choices enable higher cutting parameters with reliable results, particularly when combined with a suitable toolholder and cutting data adapted for stainless steels and difficult‑to‑cut alloys. Application guidance and machining benefit Selecting this insert supports a productivity‑oriented machining strategy for demanding materials. The coated, WSM10S grade is suitable for applications where stable chip formation and thermal resistance are required, such as automotive components, valve bodies and aerospace parts made from rostfreie Stähle or high‑temperature alloys. By focusing on cutting parameter optimisation and appropriate coolant strategy, the insert can deliver consistent surface quality and repeatable tool life, reducing overall process variability. Contact Metav Werkzeuge for tailored cutting data and availability of Walter Tools Tiger·tec Silver inserts and receive practical advice for integration into existing production chains. Technical data Article number: CCMT09T308-FM4-WSM10S-WALTER Product designation: CCMT09T308-FM4 WSM10S Manufacturer: Walter Tools Type: Indexable turning/boring insert Facts Corner radius: 0.8 mm Clearance angle: 7° Insert size: 09 Thickness: T3 Special features Coating: Tiger·tec Silver Grade: WSM10S (coated cemented carbide) Chipbreaker: FM4 Shape: Rhombus 80° Application groups: M (rostfreie Stähle), S (heat‑resistant superalloys and titanium) FAQ What materials is this insert suited for? The CCMT09T308-FM4 WSM10S insert from Walter Tools is designed primarily for rostfreie Stähle (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering thermal stability and controlled chip formation. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating on the WSM10S grade reduces abrasive and adhesive wear, improving edge life during high‑temperature cuts and making the insert suitable for sustained machining of tough alloys. Which operations benefit most from the FM4 chipbreaker? Turning and light boring operations with a need for short, curled chips benefit most; the FM4 chipbreaker ensures predictable chip flow and better surface finish with fewer secondary steps. Can the insert handle interrupted cuts? Yes — the 0.8 mm nose radius and the WSM10S grade provide a robust cutting edge that tolerates moderate interruptions while maintaining stable performance. Is the Rhombus 80° geometry versatile for different turning tasks? The Rhombus 80° shape is well suited for general turning profiles and offers favourable entry angles for both conventional and semi‑finish operations, making it a flexible choice for many workshops. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer.
CCMT09T308-FM4 WSM20S WSM20S Wendeplatten - Walter Tools
High wear resistance and optimised chip control make this insert a reliable choice for machining demanding alloys; the Tiger·tec Silver coating and the WSM20S grade extend edge life and process stability. Combined with a 0.8 mm corner radius and a rhombic 80° form with a 7° clearance angle, the insert delivers consistent results in rostfreier Stahl and heat‑resistant superalloys. Order directly via Metav Werkzeuge or request application advice from their specialists. CCMT09T308-FM4 WSM20S indexable insert – Tiger·tec Silver coating, 0.8 mm radius | Walter Tools A compact CCMT09T308-FM4 WSM20S indexable insert engineered for high‑performance turning and boring of rostfreier Stahl and heat‑resistant superalloys. Tiger·tec Silver coating for heat resistance Suitable for stainless steels and superalloys 0.8 mm corner radius for edge strength Rhombic 80° form with 7° clearance angle Durable coating and longer tool life for demanding alloys The combination of the Tiger·tec Silver coating and the WSM20S grade provides elevated thermal stability and wear resistance when machining tough materials. This results in prolonged tool life and fewer tool changes, which directly improves shop floor efficiency. The coated carbide substrate supports stable cutting edges under high temperatures and built‑up edge tendencies typical for rostfreier Stahl, while the specified tolerance class M ensures consistent geometry across production batches. Geometry that improves chip formation and surface quality The insert’s rhombic 80° profile and 7° clearance angle reduce cutting forces and support predictable chip flow. A 0.8 mm corner radius enhances edge strength for interrupted cuts and varying feed rates, aiding in consistent surface finish and dimensional accuracy. The FM4 chipbreaker is tuned to the material groups indicated, helping to break and evacuate chips reliably and lowering the risk of recutting or surface damage in medium to heavy turning operations. Process reliability and productivity in serial manufacturing Built for reliable performance in turning and boring applications, this indexable insert contributes to stable machining parameters and repeatable cycle times. The material designation S / M indicates suitability for heat‑resistant superalloys and rostfreie Stähle respectively, allowing process engineers to standardise tooling for mixed production runs. Reduced downtime from longer edge life and the predictable behaviour of the grade support higher overall productivity and lower unit cost over long production runs. Practical application guidance and compatibility The insert is compatible with standard CCMT toolholders and is designed for versatile use across turning and light boring operations. Selection of the correct cutting data—feed, speed and depth of cut—depends on the workpiece alloy and hardness; when machining rostfreier Stahl a focus on stable feeds and adaptable cutting speeds reduces heat concentration and promotes secure chip formation. For titanium and nickel‑base superalloys, the thermal benefits of the Tiger·tec Silver coating help maintain edge integrity under elevated cutting temperatures. Contact Metav Werkzeuge for tailored cutting data, availability of Walter Tools CCMT09T308-FM4 WSM20S inserts and application support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: CCMT09T308-FM4-WSM20S-WALTER ISO designation: CCMT09T308-FM4 WSM20S Series: Tiger-tec Silver Manufacturer: Walter Tools Core dimensions Insert size: 09 Corner radius: 0.8 mm Clearance angle: 7° Plate thickness: T3 Plate form: Rhombus 80° Tolerance class: M Materials & special features Grade: WSM20S Chipbreaker: FM4 Material applicability: S / M Coating: Tiger·tec Silver Execution: T FAQ Which materials is this insert intended for? The CCMT09T308-FM4 WSM20S insert is specified for rostfreie Stähle (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), reflecting the S / M material applicability of the WSM20S grade. What coating and grade does the insert feature? The insert uses the Tiger·tec Silver coating and the WSM20S coated‑carbide grade, designed for improved thermal resistance and stable cutting edges in demanding materials. What are the key geometry benefits of this insert? The rhombic 80° form with a 7° clearance angle and a 0.8 mm corner radius deliver robust edge strength, reduced cutting forces and improved chip control via the FM4 chipbreaker. Can this insert be used for both turning and boring operations? Yes, the design supports indexable turning and light boring duties when mounted in compatible CCMT toolholders; suitability depends on toolholder compatibility and cutting parameters. What tolerance and execution are specified for consistent performance? The insert is supplied in tolerance class M with execution T, ensuring uniform geometry and reliable interchangeability in production environments. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com