Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCMT09T304-FP6 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WPP10G grade and the FP6 chipbreaker for consistent, high‑performance turning of steel; order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. CCMT09T304-FP10G indexable turning and boring insert — Tiger·tec Gold, for steel — Walter Tools The CCMT09T304-FP6 WPP10G is a rhombic 80° indexable insert designed for turning and boring applications in steel, combining a Tiger·tec Gold coating with an FP6 chipbreaker for reliable chip control and extended tool life. Tiger·tec Gold coated WPP10G grade FP6 chipbreaker for stable chip control Rhombic 80° form, 0.4 mm corner radius 7° relief, plate thickness T3 Optimised wear resistance and productivity for steel machining The combination of the Tiger·tec Gold coating and the WPP10G grade delivers improved wear resistance and consistent edge stability during medium‑ to high‑duty turning operations. Coated carbide inserts of this class are engineered to tolerate the heat and typical chip formation encountered when machining steels (ISO group P), which reduces flank wear and helps maintain dimensional accuracy over longer tool life. This results in fewer insert changes, reduced downtime and a lower cost per component in serial production. Reliable chip control and process stability Integrated FP6 chip geometry stabilises chip formation and evacuation, supporting uninterrupted machining and safer swarf handling. The modest 0.4 mm corner radius increases edge strength without compromising surface finish, while the 7° relief angle reduces rubbing and cutting forces. Together, these design choices provide a pragmatic balance between durability and surface quality, making the insert suitable for a broad range of steel grades from wear‑resistant to tougher steels. Versatile geometry for everyday workshop use The rhombic 80° form offers versatility across turning and boring toolholders and is widely compatible with standard indexable insert seats. The plate thickness T3 contributes to stability in interrupted cuts and heavier cross‑sections, while the CCMT style designation ensures familiar indexing and seating for quick replacement. Such geometry supports both roughing and light finishing passes, enabling flexible process planning without frequent tool changes. Application focus and measurable benefits Designed by Walter Tools and produced within the Tiger·tec Gold series, this insert addresses the pragmatic needs of production shops seeking process security and repeatable results. Its suitability for steel (ISO P) means predictable cutting behaviour across many workpiece alloys. The net effect is a measurable improvement in uptime and component quality, with a lower tool consumption rate when compared with uncoated or less optimised grades. Discuss batch availability and application details with Metav Werkzeuge to integrate Walter Tools' Tiger·tec Gold inserts into production workflows and achieve consistent steel turning performance Technical Data Article number: CCMT09T304-FP6-WPP10G-WALTER Designation: CCMT09T304-FP6 ISO designation: CCMT09T304-FP6 WPP10G Grade: WPP10G Series: Tiger·tec Gold Manufacturer: Walter Tools Product type: Indexable turning and boring insert Core technical data Free angle: 7° Corner radius: 0.4 mm Plate size: 09 Plate thickness: T3 Form angle: Rhombus 80° Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Chipbreaker: FP6 Material application: Steel (ISO group P) Execution: T Series description: suitable for a range of steel grades, from wear‑resistant to tougher alloys FAQ What materials is this insert intended for? The insert is designed for machining steel and is classified for ISO group P; the Tiger·tec Gold grade and FP6 chipbreaker optimise performance when turning steel workpieces. How does the FP6 chipbreaker influence machining? The FP6 chipbreaker controls chip shape and evacuation to improve process stability and reduce the risk of built‑up edge, which helps maintain consistent surface finish with this Walter Tools insert. What does the 0.4 mm corner radius mean for operations? A 0.4 mm corner radius provides increased edge strength for interrupted cuts and moderate depths of cut while still allowing acceptable surface finish for finishing passes. Is the rhombic 80° form suitable for finishing and roughing? Yes, the rhombic 80° geometry balances accessibility for finishing passes with the strength required for light to medium roughing, making it a versatile choice in turning and boring setups. Which series and coating are applied to this insert? This insert belongs to the Tiger·tec Gold series with a coated carbide construction, combining coating technology and substrate properties for enhanced wear resistance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original, brand‑new goods from the manufacturer.
CCMT09T304-FP6 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of durable cutting performance, precise tolerance class and effective chip control for steady steel turning operations. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. CCMT09T304-FP6 WPP20G turning insert (Tiger·tec Gold) by Walter Tools — coated carbide, steel application A CCMT09T304-FP6 WPP20G indexable insert for general turning, designed for reliable performance in steel machining and equipped with a dedicated FP6 chipbreaker. Tiger·tec Gold coating for durable cutting edge Optimised for steel machining (ISO group P) Rhombic 80° geometry with 0.4 mm corner radius FP6 chipbreaker for consistent chip control Consistent tool life through advanced coating technology The combination of Tiger·tec Gold technology and the WPP20G grade yields a coated carbide surface engineered for balanced wear resistance and toughness. This metallurgical pairing reduces flank wear in the typical temperature ranges encountered when machining steel, extending the service life of the cutting edge and lowering the need for frequent index changes. The result is a measurable increase in process efficiency and fewer interruptions in production, benefiting batch and continuous turning operations. Stable machining and reliable chip control for predictable results Equipped with an FP6 chipbreaker, the insert promotes regular chip formation and evacuation under common turning parameters for steel. The chip management reduces the risk of entanglement and allows more consistent surface finishes, which supports downstream processes and inspection routines. Paired with the rhombic 80° geometry, this design balances radial and axial cutting forces to maintain tool stability during finishing and semi-finishing passes. Precise dimensions and tolerance class for dependable setups Manufactured to tolerance class M, the insert ensures repeatable seating and positional accuracy in compatible tool holders. Key dimensional attributes such as the 0.4 mm corner radius and the 7° clearance angle allow engineers to predict cutting behaviour and programme feeds and speeds with confidence. This predictability simplifies process planning and reduces trial cuts during setup, contributing to shorter machine downtime. Versatility for a wide range of steel turning tasks The insert’s grade and geometry are tuned for ISO group P materials, covering unalloyed and alloyed steels commonly used across industry sectors. Its moderate corner radius supports both surface integrity and tool life, making the component suitable for finishing and light roughing where a balance of tolerance and edge strength is essential. The insert’s format and chipbreaker also make it appropriate for automated and manual turning applications that prioritise repeatable performance. For application advice or to request availability of Walter Tools' CCMT09T304-FP6 WPP20G inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: CCMT09T304-FP6-WPP20G-WALTER Designation: CCMT09T304-FP6 WPP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP20G Product type: Turning indexable insert Data Corner radius: 0.4 mm Clearance angle: 7° Plate size: 09 Plate thickness: T3 Tolerance class: M Special features Coating technology: Tiger·tec Gold Substrate: coated carbide Chipbreaker: FP6 Plate form: Rhombic 80° Execution: T Material suitability: Steel (ISO group P) FAQ What materials is this insert designed to machine? The CCMT09T304-FP6 WPP20G insert from Walter Tools is formulated for steel (ISO group P), suitable for unalloyed and alloyed steels where controlled heat and chip formation are expected. How does the FP6 chipbreaker affect cutting performance? The FP6 chipbreaker on the CCMT09T304-FP6 WPP20G promotes consistent chip formation and evacuation, aiding surface finish and reducing the likelihood of chip-related interruptions in turning operations. What does the 0.4 mm corner radius mean for part finish? A 0.4 mm radius provides a compromise between edge strength and surface integrity; it supports finer finishes than larger radii while still offering resistance to edge chipping during typical steel turning. Is the insert suitable for finishing and roughing? The geometry and WPP20G grade make the insert appropriate for finishing and light to moderate roughing of steel, delivering a balance between wear resistance and toughness for varied cutting conditions. What tolerance and repeatability can be expected from this insert? Produced to tolerance class M, the insert offers consistent seating and repeatable dimensional behaviour when used with compatible CCMT tool holders and clamping systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory-new product of Walter Tools.
CCMT09T304-FW4 WKP01G Wendeplatten - Walter Tools
Take advantage of Tiger‑tec Gold performance and the WKP01G grade for extended tool life and stable chip control; combine the optimized FW4 chipbreaker and 0.4 mm corner radius for consistent turning of steel and cast iron. Order directly via Metav Werkzeuge or request technical advice from our consultants. CCMT09T304-FW4 WKP01G — Turning insert, Tiger‑tec Gold, FW4 chipbreaker, 0.4 mm radius (Walter Tools) A versatile CCMT09T304-FW4 WKP01G rhombic 80° turning insert from Walter Tools, designed for productive machining of steel and cast iron in demanding production environments Tiger‑tec Gold coated carbide for long life Optimised FW4 chipbreaker for reliable chips 0.4 mm corner radius for stable cutting edge Suitable for steel and cast iron machining Boosted productivity for mixed production runs The combination of a Tiger‑tec Gold coating and the WKP01G grade yields a robust wear behaviour that translates into longer tool life and fewer index changes. By using a coated cemented carbide substrate, the insert maintains a stable cutting edge under the thermal and mechanical loads typical of machining steel (P) and cast iron (K). The design reduces downtime caused by frequent insert changes and supports continuous operation in batch and single‑piece production alike. Reliable chip control and consistent surface finish The FW4 chipbreaker geometry is engineered to produce short, controllable chips when turning a wide range of steels and cast irons, improving process safety and reducing the risk of chip entanglement. Combined with the rhombic 80° shape and a 0.4 mm corner radius, the insert offers a balance between edge strength and surface integrity, enabling stable feeds and reproducible part quality without sacrificing productivity. Secure tool performance and application clarity Tolerance class M, the T3 plate thickness and the 7° relief angle contribute to a predictable cutting behaviour, especially under moderate to heavy depths of cut. The grade’s adaptation to ISO material groups P and K means the insert is a pragmatic choice for workshops that require flexible tooling for turning operations across both steel and cast iron families. The result is a dependable geometry that supports machinists and programmers in achieving consistent cycle times. Efficient integration into machining processes With the standard CCMT geometry and the FW4 chipbreaker, the insert fits common toolholders and clamping systems, simplifying tool management and inventory. The clear ISO designation and series labelling facilitate sort allocation and reordering. For production planners the combination of long service life and predictable wear behaviour reduces spare inventory needs and supports cost‑efficient process planning. For tailored technical advice on the Tiger‑tec Gold CCMT09T304-FW4 WKP01G insert or to check current availability, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance and ordering support Technical Data Article number: CCMT09T304-FW4-WKP01G-WALTER Product: Turning insert CCMT09T304-FW4 WKP01G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WKP01G Core Technical Data Free angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 80° Size: 09 Thickness: T3 Chipbreaker: FW4 Tolerance class: M Special features Coating / technology: Tiger‑tec Gold Material suitability: Steel (P), Cast iron (K) Execution: T ISO designation: CCMT09T304-FW4 WKP01G FAQ What materials is this insert best suited for? The CCMT09T304-FW4 WKP01G is designed for steel (P) and cast iron (K) machining, utilising the Tiger‑tec Gold grade for improved wear resistance on these material groups. How does the FW4 chipbreaker affect machining? The FW4 chipbreaker on this Walter Tools insert produces short, controllable chips and promotes stable cutting forces, which helps to maintain surface quality and process safety during turning. What does the 0.4 mm corner radius provide? A 0.4 mm corner radius increases edge robustness for interrupted cuts and supports consistent surface finish without excessive cutting forces, suitable for many general turning applications. Is the insert compatible with standard CCMT toolholders? Yes, the CCMT form and dimensions follow ISO‑compatible geometry, so the insert fits common CCMT toolholders used in turning operations. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
CCMT09T304-FW4 WPP10G WPP10G Wendeplatten - Walter Tools
High wear resistance and dependable chip control reduce downtimes and improve surface quality; the Tiger‑tec Gold WPP10G grade combined with the FW4 chipbreaker extends tool life and stabilises process reliability. Order the insert directly via Metav Werkzeuge or contact the consultants for cutting data and availability. CCMT09T304-FW4 WPP10G — Turning insert for steel, Tiger‑tec Gold | Walter Tools A CCMT09T304-FW4 WPP10G turning insert engineered for productive steel machining, offering long tool life and consistent chip formation in ISO P applications. Tiger‑tec Gold coating WPP10G FW4 chipbreaker for controlled chip flow 0.4 mm nose radius for fine turning Rhombic 80° form, 7° clearance angle Durable coating for steady chip control and longer tool life The WPP10G grade, based on Walter’s Tiger‑tec Gold technology, is a coated carbide solution optimised for machining steel (ISO P). The hard, wear‑resistant coating reduces adhesive wear and stabilises the cutting edge at elevated temperatures, which translates into longer tool life and fewer insert changes. For production environments where predictable performance matters, this coating helps to maintain dimensional stability and lower overall cost per part by delaying flank wear and preserving cutting geometry. Geometry that improves surface finish and process stability The rhombic 80° insert form and the 0.4 mm nose radius deliver a balance between strength and precision. The FW4 chipbreaker is designed to control chip formation during common turning operations, reducing the risk of long, stringy chips and improving swarf management. The 7° clearance angle lowers rubbing and heat build‑up on the flank face, contributing to a better surface finish and reduced cutting forces. This combination is particularly beneficial for medium to heavy turning where consistent edge condition matters. Practical compatibility and machining efficiency in the workshop As an ISO CCMT‑style insert, the CCMT09T304-FW4 fits standard CCMT toolholders, allowing seamless integration into existing turning setups. The insert thickness T3 and tolerance class M ensure robust clamping and repeatable positioning during indexing. Because the grade is tailored for steel, it is suitable for a wide range of production tasks—from finishing to more demanding semi‑roughing—helping to simplify inventory and speed tool selection in busy shops. Contact Metav Werkzeuge for cutting parameters, batch availability and tailored advice on the Walter Tools CCMT09T304-FW4 WPP10G turning insert: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: CCMT09T304-FW4-WPP10G-WALTER Article designation: CCMT09T304-FW4 WPP10G Product type: Turning insert Brand: Walter Tools Series: Tiger‑tec Gold Grade: WPP10G Execution: T Tolerance class: M Facts Relief/clearance angle: 7° Nose radius: 0.4 mm Insert size: 09 Shape: Rhombic 80° Chipbreaker: FW4 Plate thickness: T3 Materials & features Coated carbide grade: WPP10G (Tiger‑tec Gold) Application group: ISO P (steel) Suitable for: Steel machining Design benefits: consistent chip control, stable cutting edge, improved wear resistance FAQ Which materials is this insert suitable for? This CCMT09T304-FW4 WPP10G insert from Walter Tools is designed for steel machining and conforms to ISO P material recommendations. What advantages does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WPP10G grade enhances wear resistance and thermal stability, resulting in longer life and steady performance under typical steel turning conditions. How does the FW4 chipbreaker affect machining? The FW4 chipbreaker promotes reliable chip segmentation and evacuation, improving swarf control and reducing the likelihood of interrupted cuts in turning operations. What are the key geometry specifications to be aware of? Important geometry values for the insert include a 0.4 mm nose radius, Rhombic 80° shape and a 7° clearance angle; these contribute to surface finish and edge strength. Is the CCMT09T304-FW4 compatible with standard CCMT holders? Yes, the insert follows the CCMT designation and is compatible with corresponding standard CCMT toolholders used in indexable‑insert turning systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Walter Tools is the market appearance of Walter AG; Walter AG is part of the Sandvik group. Brand names and trademarks are mentioned for clarification only. There is no affiliation between our company and the mentioned brands. The offered item is original, factory‑new goods of the manufacturer.
CCMT09T304-FW4 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the universal WPP20G grade and the precise 0.4 mm corner radius for stable, productive steel turning — order directly via Metav Werkzeuge or ask the consultants for tailored cutting data. CCMT09T304-FW4 WPP20G – Turning indexable insert, Tiger·tec Gold, FW4 chipbreaker (Walter Tools) The CCMT09T304-FW4 WPP20G is a rhombic 80° turning insert designed for universal steel machining, offering controlled chip formation with an FW4 chipbreaker and a 7° relief angle. Tiger·tec Gold coated carbide grade Universal grade for steel machining Rhombic 80° shape, 0.4 mm corner radius 7° clearance with FW4 chipbreaker Consistent productivity through modern coating technology The combination of the Tiger·tec Gold coating and the WPP20G substrate delivers a high level of process stability when machining steels. The coated carbide construction resists abrasive wear and maintains a stable cutting edge, which reduces tool changes and supports higher cutting parameters. This translates into measurable gains in throughput and repeatability on production lines where consistent cycle times are crucial. The integrated chip control strategy of the FW4 geometry improves evacuation and reduces built-up edge formation, enhancing surface quality during medium to heavy finishing passes. Geometry that ensures dimensional accuracy and surface quality A Rhombic 80° profile with a 0.4 mm corner radius provides a reliable balance between strength and finish. The 7° relief angle minimises rubbing while preserving cutting edge life, and the T3 insert thickness contributes to rigidity in standard toolholder pockets. These geometric features result in improved part tolerance adherence and a reduced risk of chatter in typical turning operations. The tolerance class M supports interchangeability and predictable seating in indexable holders, which simplifies setup and shortens machine downtime for tool changes. Shop-floor benefits: handling, compatibility and economical use Indexable inserts of this type simplify inventory management and lower per-part tooling costs compared with solid carbide alternatives. The FW4 chipbreaker offers manageable swarf for common steel grades, reducing secondary handling and cleaning time. Compatibility with conventional CCMT-compatible holders facilitates integration into existing turning fixtures without the need for costly adaptations. Together with the proven Walter Tools production standards, this insert supports a pragmatic approach to machining that emphasises uptime, repeatable quality and easy operator handling. Contact Metav Werkzeuge for tailored cutting data, application advice and availability for the Walter Tools CCMT09T304-FW4 WPP20G; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CCMT09T304-FW4-WPP20G-WALTER Label: Drehwendeschneidplatte CCMT09T304-FW4 WPP20G Walter Tools Product type: Turning indexable insert Grade: WPP20G Series: Tiger-tec Gold Chipbreaker: FW4 Relief angle: 7° Corner radius: 0.4 mm Insert shape: Rhombic 80° Insert size: 09 Thickness: T3 Tolerance class: M Applicable material: Steel Core specifications Clearance angle: 7° Corner radius: 0.4 mm Insert size designation: 09 Thickness designation: T3 Tolerance class: M Special features Coated carbide (Tiger·tec Gold) FW4 chipbreaker for controlled swarf Rhombic 80° geometry for versatility Universal suitability for steel machining FAQ What materials is this insert designed to machine? The CCMT09T304-FW4 WPP20G is specified for machining steel grades; the WPP20G grade and Tiger·tec Gold coating are optimised for typical heat and chip formation conditions in steel turning. Is the CCMT09T304-FW4 compatible with standard CCMT holders? Yes, the geometry and tolerance class M make the insert compatible with conventional CCMT-compatible turning toolholders used for indexable inserts. What advantages does the FW4 chipbreaker offer? The FW4 chipbreaker on this insert improves chip control for medium to finishing cuts in steel, promoting stable cutting conditions and better surface finishes on turned components. How does the Tiger·tec Gold technology affect tool life? Tiger·tec Gold coating enhances wear resistance and edge stability under typical steel turning loads, which helps to extend effective tool life and maintain part quality over longer production runs. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named manufacturers. The offered item is an original, factory-new product from the manufacturer.
CCMT09T304-FW4 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver wear resistance, the WSM10S grade designed for tough alloys, and precise geometry for reliable turning of rostfreier Stahl; order the CCMT09T304-FW4 WSM10S insert via Metav Werkzeuge or ask the consultants for application-specific advice. CCMT09T304-FW4 WSM10S indexable turning insert by Walter Tools — Tiger·tec Silver grade for rostfreier Stahl and superalloys The CCMT09T304-FW4 WSM10S is an indexable turning insert engineered for heavy-duty and heat-sensitive materials, combining a thermally resistant coating with a robust chipbreaker for stable metalcutting. Tiger·tec Silver coating for high thermal resistance WSM10S grade for rostfreier Stahl and superalloys FW4 chipbreaker for controlled chip formation Rhombus 80° geometry with 0.4 mm corner radius Consistent cutting performance where heat and toughness challenge the process The combination of Tiger·tec Silver coating and WSM10S grade provides improved thermal stability and edge life in applications with elevated cutting temperatures. This insert is optimised for machining rostfreier Stahl and heat-resistant superalloys, where conventional grades struggle with built-up edge and rapid wear. The coated carbide substrate supports a secure cutting edge, while the FW4 chipbreaker promotes consistent chip control; together these features reduce edge failure and contribute to predictable tool life, supporting throughput and reducing unscheduled tool changes. Geometry that secures dimensional accuracy and surface quality Precision geometry matters for turning operations that demand repeatability. The Rhombus 80° form and 0.4 mm corner radius balance strength and fine finishing capability, while the 7° clearance minimises rubbing on the flank face. The insert’s size designation and plate thickness support stable clamping and stiffness in the toolholder, helping to maintain tolerances and deliver repeatable surface finishes. For workshops seeking a reliable mix of robustness and finish, this geometry helps to lower scrap rates and stabilise cycle times. Process efficiency and predictable tool management in production Designed for demanding materials and continuous production, this insert contributes to higher process security and cost-efficient machining. The engineered chip control reduces interruptions from troublesome chips, while the grade’s resistance to thermal loading prolongs edge life, which in turn reduces downtime for index changes. When paired with appropriate cutting data and a suitable toolholder, the insert supports a productive turning strategy that emphasises stability and consistent output—key for manufacturers aiming to optimise both throughput and component quality. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Silver inserts and expert guidance to match the CCMT09T304-FW4 WSM10S to specific rostfreier Stahl or superalloy turning tasks Technical data Article number: CCMT09T304-FW4-WSM10S-WALTER Designation: CCMT09T304-FW4 WSM10S Product type: indexable turning insert Series: Tiger·tec Silver Grade: WSM10S Manufacturer: Walter Tools Facts Clearance: 7° Corner radius: 0.4 mm Plate size: 09 Plate thickness: T3 Plate form: Rhombus 80° Tolerance class: M Special features Coating: Tiger·tec Silver Substrate: coated carbide Chipbreaker: FW4 Material groups: S / M Typical applications: rostfreier Stahl; heat-resistant superalloys and titanium FAQ What materials is this insert suitable for? The CCMT09T304-FW4 WSM10S is specified for machining rostfreier Stahl and heat-resistant superalloys (material groups M and S), reflecting the WSM10S grade’s thermal and edge stability. How does the FW4 chipbreaker influence performance? The FW4 chipbreaker on the CCMT09T304-FW4 WSM10S promotes controlled chip formation and evacuation, reducing interruptions and supporting a stable cutting process with improved surface results. Is this insert compatible with standard CCMT toolholders? The CCMT09T304-FW4 WSM10S follows the CCMT indexable insert geometry and fits standard CCMT-compatible turning toolholders; correct clamping and seat condition remain essential for optimal performance. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating increases thermal resistance and wear protection, which is especially beneficial when turning tough, heat-prone materials such as rostfreier Stahl and nickel-based alloys. Can the CCMT09T304-FW4 WSM10S be used for finishing operations? With its 0.4 mm corner radius and Rhombus 80° geometry, the insert can achieve acceptable surface quality in many finishing passes; cutting parameters should be adapted to the component’s tolerance and surface requirements. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; info@walter-tools.com Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
CCMT09T304-FW4 WSM20S FW4 Wendeplatten - Walter Tools
For reliable machining of stainless steels and heat‑resistant alloys, this turning insert combines a Tiger·tec Silver coated grade with the FW4 chipbreaker and a 0.4 mm corner radius for secure chip control and extended edge life; Order the CCMT09T304‑FW4 WSM20S turning insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT09T304‑FW4 WSM20S turning insert — Tiger·tec Silver, 7° clearance (Walter Tools) The CCMT09T304‑FW4 WSM20S is a rhombic 80° indexable turning insert engineered for demanding turning in stainless steels and superalloys, offering a robust chipcontrol geometry and a coated carbide grade for improved thermal resistance. Tiger·tec Silver coating for heat resistance FW4 chipbreaker for secure chip control 7° clearance angle for consistent cutting Rhombic 80° shape with 0.4 mm corner radius High‑temperature performance for stainless steels and superalloys The coated carbide grade WSM20S, part of the Tiger·tec Silver series, is designed for the tribological and thermal challenges of groups M and S (stainless steels and heat‑resistant superalloys). The advanced coating reduces adhesion and supports a stable cutting edge, which helps to avoid built‑up edge and premature flank wear in tough materials. The chipbreaker geometry improves evacuation and reduces the risk of long, stringy chips, translating into fewer interruptions and higher process reliability — an important consideration for batch production and safety‑critical components. Precision geometry that improves surface quality and tool life The rhombic 80° shape combined with a 0.4 mm corner radius provides a balance between edge strength and finishing capability: the modest radius gives a robust cutting corner for interrupted cuts while still enabling a fine surface finish on profile turning. A 7° clearance angle helps to maintain a predictable contact geometry and reduces rubbing in heavy cuts, which benefits tool life and reduces heat generation. The FW4 chipbreaker is tuned to support consistent chip segmentation in loaded cutting conditions, making the insert a pragmatic choice where both reproducibility and part quality matter. Productivity benefits and shopfloor integration As a production‑oriented grade from Walter Tools, this insert supports repeatable performance and fewer tool changes under demanding conditions, which improves uptime and machining efficiency. Using a coated, application‑focused grade means higher cutting speeds and longer intervals between indexings compared with uncoated carbide in similar tasks. For users aiming to streamline tool inventories, the CCMT geometry and common dimensions simplify stocking and allow rapid replacement in standard toolholders. Selection of cutting data should follow manufacturer guidance and be adapted to the specific alloy and rigidity of the machine setup to unlock the full productivity potential. For bespoke application recommendations and to secure supply of Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge for technical consultation and ordering support. Technical data SKU: CCMT09T304-FW4-WSM20S-WALTER Designation: CCMT09T304-FW4 WSM20S Product type: Turning insert Series: Tiger·tec Silver Grade: WSM20S Manufacturer: Walter Tools Core data Clearance angle: 7° Corner radius: 0.4 mm Insert size: 09 Thickness: T3 Tolerance class: M Features / Applications Chipbreaker: FW4 Shape: Rhombic 80° Execution: T Suitable for: stainless steels (M) and superalloys (S) Applicable material groups: S / M FAQ Which materials is this insert intended for? The CCMT09T304‑FW4 WSM20S is specified for stainless steels (ISO group M) and heat‑resistant superalloys (ISO group S), the grade and chipbreaker support secure chip formation in these materials. How does the FW4 chipbreaker affect machining? The FW4 chipbreaker on this insert promotes controlled chip segmentation and evacuation, reducing chip‑related interruptions when machining high‑temperature alloys with the CCMT09T304‑FW4 WSM20S. What advantage does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating increases thermal resistance and reduces adhesion, which helps maintain a stable cutting edge and extends tool life under elevated cutting temperatures. Is the 0.4 mm corner radius suitable for finishing? A 0.4 mm corner radius offers a compromise between a strong cutting edge and surface finish; it is suitable for many finishing and medium‑duty turning tasks using the CCMT09T304‑FW4 WSM20S. Can this insert be used in standard CCMT toolholders? Yes, the CCMT designation matches standard indexable turning toolholders, enabling straightforward integration into existing setups for the CCMT09T304‑FW4 WSM20S. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanatory purposes and do not indicate any affiliation with our company. The offered article is an original, factory‑new product of Walter Tools.
CCMT09T304-FW4 WSM30S FW4 Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating and the WSM30S grade delivers high edge stability and extended tool life for demanding turning operations; the result is reliable performance when machining stainless steels and heat‑resistant superalloys. Order the insert directly via Metav Werkzeuge or consult the specialists for application‑specific cutting data. CCMT09T304-FW4 WSM30S rhombic 80° turning insert, Tiger·tec Silver — Walter Tools The CCMT09T304-FW4 WSM30S is a rhombic 80° indexable insert with a FW4 chipbreaker, designed for heavy duty machining of stainless steels and difficult‑to‑cut superalloys in industrial turning applications. Tiger·tec Silver coating for wear resistance Optimised for stainless steel and superalloys Rhombic 80° geometry with 0.4 mm radius FW4 chipbreaker for consistent chip control Improved process reliability for tough materials The combination of the WSM30S grade and Tiger·tec Silver coating is engineered to resist the thermal and mechanical loads typical of machining stainless steels and superalloys. This results in stable cutting edges and reduced flank wear over successive passes, which directly improves component consistency and reduces unexpected tool changes. For production environments where downtime and scrap cost are critical, the insert’s composition supports a predictable tool life and repeatable results. Consistent chip control for cleaner finishes The FW4 chipbreaker geometry promotes controlled chip formation even under adverse cutting conditions, which helps prevent chip entanglement and improves surface integrity. Controlled chips also reduce secondary operations and aid automatic chip evacuation in CNC lathes. The outcome is a better surface finish and fewer interruptions in the machining cycle, supporting higher throughput and reduced rework. Geometry that balances strength and precision With a rhombic 80° form and a 0.4 mm corner radius, this insert provides a robust cutting edge while still enabling precise profile work and reliable corner performance. The 7° clearance angle supports effective cutting without excessive rubbing, and the insert thickness (T3) contributes to rigidity in the toolholder. Together, these design choices ensure an appropriate compromise between component accuracy and the mechanical demands of heavier cuts. Practical benefits for workshop integration The insert’s ISO designation CCMT09T304‑FW4 simplifies selection for tooling systems and reduces set‑up time when matching inserts to holders. Its suitability for ISO material groups M (stainless steels) and S (heat‑resistant superalloys and titanium) means fewer grade changes across mixed batches, improving inventory efficiency. As part of Walter Tools’ Tiger·tec Silver family, the cutting grade is intended to deliver reproducible performance and easier process standardisation across series of parts. Contact Metav Werkzeuge for tailored cutting data and application guidance on Walter Tools Tiger·tec Silver inserts; eMail info@metav-werkzeuge.com or call +49 2822 7131930 for expert recommendations Technical Data Article number: CCMT09T304-FW4-WSM30S-WALTER Product type: Turning insert (indexable insert) Designation: CCMT09T304-FW4 WSM30S Manufacturer: Walter Tools Core technical data Geometry: Rhombic 80° Corner radius: 0.4 mm Clearance angle: 7° Insert size: 09 Thickness: T3 Chipbreaker: FW4 Grade: WSM30S Special features Coating technology: Tiger·tec Silver Material suitability: stainless steels (ISO group M) Also suitable for: heat‑resistant superalloys / titanium (ISO group S) Tolerance class: M Series: Tiger‑tec Silver FAQ Which materials is this insert suited for? The CCMT09T304‑FW4 WSM30S insert from Walter Tools is specifically formulated for stainless steels (ISO group M) and is also suitable for difficult‑to‑cut superalloys and titanium (ISO group S). What benefit does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WSM30S grade increases heat and wear resistance, leading to improved edge stability and longer service life in demanding turning operations. How does the FW4 chipbreaker affect machining? The FW4 chipbreaker promotes controlled chip formation and evacuation, which enhances surface finish quality and reduces the risk of chip‑related interruptions during automated turning. Is the 0.4 mm corner radius suitable for finishing operations? A 0.4 mm corner radius balances edge strength with the ability to achieve fine surface finishes; it is suitable for semi‑finish and many finishing passes depending on component geometry. Can this insert be used across mixed production batches? Yes — the WSM30S grade’s suitability for ISO groups M and S supports a wider range of materials, helping to streamline tooling choices across varied production requirements. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
CCMT09T304-MK4 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver wear resistance, a dedicated MK4 chipbreaker and the rhombic 80° geometry for reliable cast iron turning; order directly via Metav Werkzeuge or consult our specialists for process optimisation. CCMT09T304-MK4 WKK10S — Walter Tools turning insert, Tiger·tec Silver for cast iron The CCMT09T304-MK4 WKK10S is a rhombic 80° indexable turning insert designed for efficient machining of cast iron, combining a coated carbide grade with a specialised chip control geometry Tiger·tec Silver coating for extended tool life Optimised for cast iron machining (K) Rhombic 80° insert with 0.4 mm corner radius 7° clearance angle for stable cutting performance Consistent chip control increases productive cutting time The combination of the Tiger·tec Silver coating and the WKK10S grade targets the specific challenges of cast iron, where abrasive wear and short, breaking chips are common. The MK4 chipbreaker is engineered to promote controlled chip formation, reducing frequent interruptions for chip clearing and lowering the risk of built-up edge. As a result, machining cycles achieve higher effective cutting time and a more predictable tool life, which supports stable production planning and fewer unscheduled tool changes. Geometry and edge design for repeatable surface quality The rhombic 80° insert geometry with a 0.4 mm corner radius and 7° clearance angle provides a balance between edge strength and accessibility for finishing passes. With a T3 plate thickness and tolerance class M, this design gives robust edge support under intermittent cutting typical in cast iron operations and improves repeatability across multiple indexings. The geometry supports consistent component finishes while maintaining a compromise between cutting forces and dimensional control in serial and small-batch runs. Process reliability and easy integration into turning cells As an indexable insert in the CCMT format, the component integrates into widely used toolholders for turning applications without the need for special fixtures. The coated carbide construction offers resistance to abrasive wear, contributing to predictable performance in abrasive cast iron grades. The product’s attributes promote process stability and support higher throughput with fewer tool interventions, making it suitable for workshops aiming to improve productivity while maintaining workpiece quality under varying production demands. Contact Metav Werkzeuge for application guidance and to secure Walter Tools CCMT09T304-MK4 WKK10S inserts for dependable cast iron turning Technical Data Article number: CCMT09T304-MK4-WKK10S-WALTER Designation: CCMT09T304-MK4 WKK10S Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Series: Tiger-tec Silver Grade: WKK10S Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.4 mm Insert size: 09 Plate thickness: T3 Geometry: Rhombic 80° Tolerance class: M Special features Coated carbide (Tiger·tec Silver) Chipbreaker: MK4 Optimised for cast iron (K) Suitable for indexable CCMT turning applications Stable cutting performance and abrasive wear resistance FAQ Is this insert suitable for different cast iron grades? The CCMT09T304-MK4 WKK10S grade is tailored for a broad range of cast iron materials and addresses abrasive wear and chip control specific to these grades. What benefit does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating enhances wear resistance and thermal stability, extending tool life and supporting more consistent cutting performance when machining cast iron. Can the insert be used for finishing as well as roughing? With its rhombic 80° geometry and a 0.4 mm corner radius, the insert is adaptable to both semi-finishing and finishing tasks, provided cutting data are adjusted according to the operation. How does the MK4 chipbreaker improve productivity? The MK4 chipbreaker promotes predictable chip formation in cast iron, minimising chip-related interruptions and enabling longer productive cutting intervals. Which toolholders are compatible with this insert format? The CCMT designation indicates compatibility with standard CCMT indexable turning toolholders; toolholder selection should match insert clamping and clearance requirements. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only; no connection exists between our company and the named brands. The offered item is original, brand-new goods of the manufacturer.
CCMT09T304-MM4 WMP20G MM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, proven chip control and precise geometry for efficient turning of stainless steel; this yields reliable edge life and stable production. Order the CCMT09T304‑MM4 WMP20G directly via Metav Werkzeuge or consult the team for application advice. CCMT09T304‑MM4 WMP20G turning insert — Rhombic 80°, Tiger‑tec Gold (Walter Tools) A CCMT09T304‑MM4 WMP20G indexable turning insert engineered for machining stainless steel under medium to robust cutting conditions. Tiger‑tec Gold coating for extended tool life Optimised chip control with MM4 breaker Rhombic 80° shape, 0.4 mm corner radius 7° relief angle for secure cutting Proven coating and grade for longer production runs The Tiger‑tec Gold coating combined with the WMP20G grade provides a balanced performance for demanding turning tasks on stainless steel. The multilayer coating reduces adhesive wear and supports a stable cutting edge under elevated temperatures, which in turn extends component life and reduces tool-change frequency. This results in measurable cost benefits through longer intervals between regrinds and fewer scrap parts. The coated carbide composition is designed to maintain cutting-edge integrity during medium to robust operations, enhancing process reliability in series production. Geometry that stabilises chip formation and surface quality The insert’s MM4 chipbreaker and rhombic 80° geometry are configured to promote predictable chip control and a consistent surface finish. A 0.4 mm corner radius helps to balance strength and finish quality, while the 7° relief angle supports secure cutting engagement in stainless material, minimising built‑up edge. Together, these features reduce vibrations and improve dimensional repeatability. For workshops seeking improved cycle times without sacrificing quality, the engineered geometry offers a pragmatic route to higher throughput and fewer rework steps. Application scope and workshop integration This indexable insert is sized as a plate 09 with a T3 thickness, suitable for standard turning toolholders that accept CCMT‑style inserts. It is specifically intended for stainless steel machining under medium to heavy conditions where thermal stability and controlled chip evacuation are critical. The design supports straightforward indexation and predictable wear patterns, simplifying tool management and inventory planning. For precise selection of cutting data and holder compatibility, refer to machine specifications and holder manufacturer guidance to ensure optimal clamping and coolant strategies. For tailored advice on integrating the Walter Tools CCMT09T304‑MM4 WMP20G into production and to discuss cutting parameters for specific stainless steel grades, contact Metav Werkzeuge for expert consultation and order support. Technical data SKU: CCMT09T304-MM4-WMP20G-WALTER Designation: CCMT09T304‑MM4 WMP20G Series: Tiger‑tec Gold Grade: WMP20G Facts Relief angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 80° Plate size: 09 Plate thickness: T3 Special features Coating: Tiger‑tec Gold Chipbreaker: MM4 Material group suitability: stainless steel Application: turning / indexable insert FAQ What materials is this insert suitable for? The CCMT09T304‑MM4 WMP20G from Walter Tools is optimised for machining stainless steel, designed to cope with the toughness and heat‑generation typical of these alloys. How does the MM4 chipbreaker affect performance? The MM4 chipbreaker promotes controlled chip formation and evacuation on the CCMT09T304‑MM4 WMP20G, contributing to improved surface finish and reduced risk of built‑up edge when turning stainless steels. What does the 0.4 mm corner radius deliver in practice? A 0.4 mm corner radius on this insert balances edge strength and finish quality, enabling reliable cuts with good surface integrity while offering resistance to mechanical and thermal loading. Is special tooling required to use this insert? The insert is a CCMT‑format indexable plate intended for compatible holders; ensure the chosen toolholder accepts CCMT09 plates and provides secure clamping for stable cutting conditions. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT09T304-MM4 WMP20S WMP20S Wendeplatten - Walter Tools
High wear resistance and reliable chip control make this coated carbide grade a solid choice for medium to robust turning in rostfreier Stahl; the 0.4 mm corner radius and MM4 chipbreaker improve surface finish and process stability. Order directly via Metav Werkzeuge or consult the specialists for application-specific recommendations. CCMT09T304‑MM4 WMP20S – Rhombic 80° indexable insert for rostfreier Stahl by Walter Tools, 7° clearance, 0.4 mm corner radius CCMT09T304‑MM4 WMP20S is a coated carbide turning insert intended for medium to robust machining of rostfreier Stahl, offering a balance of edge stability and surface quality in production environments Tiger·tec Silver coating for extended tool life Optimised MM4 chipbreaker for secure chip control Rhombic 80° form with 0.4 mm corner radius 7° clearance angle for medium to robust turning Consistent cutting performance for rostfreier Stahl The Tiger·tec Silver WMP20S grade combines a modern coating system with a robust carbide substrate to deliver reliable chip formation and reduced tendency to build up on the cutting edge when machining rostfreier Stahl. The coated surface reduces friction and supports thermal stability at the cutting zone, which in turn helps to maintain a sharper edge for longer. For production planners this translates into more predictable tool life and fewer unscheduled indexings, improving overall process efficiency. Enhanced process reliability and higher output per insert The insert geometry—a rhombic 80° form with a 0.4 mm corner radius and a 7° clearance angle—has been selected to balance strength and surface finish. The MM4 chipbreaker promotes controlled chip segmentation for medium to heavier feeds, reducing the risk of entangling swarf and enabling stable, continuous turning cycles. The practical result is improved productivity through longer tool cycles and fewer interruptions for regrinding or replacement. Clear identification and simple integration into tooling systems The designation indicates form, size, thickness, corner radius and chipbreaker, so the CCMT09T304‑MM4 marking helps to match inserts quickly to compatible tool holders and fixtures. The T3 thickness and size 09 format suit a wide range of commercial turning holders; the modest corner radius supports both finishing and light roughing passes depending on feed. For best results with rostfreier Stahl, use coolant where appropriate and verify insert seating and clamping torque to preserve repeatable performance and cutting-edge stability. Proven Walter Tools technology for dependable production Walter Tools designs its grades and geometries for consistent real‑world performance. The Tiger·tec Silver series focuses on wear resistance and stable edge behaviour in demanding materials such as rostfreier Stahl. Choosing a Walter grade means selecting an insert backed by engineering aimed at process reliability and reproducible results across batches, which supports predictable planning in series production and jobshop environments. For machining rostfreier Stahl with consistent results, contact Metav Werkzeuge to discuss the CCMT09T304‑MM4 WMP20S by Walter Tools and receive tailored advice for the intended application. Technical Data Article number: CCMT09T304-MM4-WMP20S-WALTER SKU: CCMT09T304-MM4 WMP20S Manufacturer: Walter Tools Product type: Indexable turning insert / Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Facts Clearance angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 80° Plate size: 09 Thickness: T3 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WMP20S (coated carbide) Chipbreaker: MM4 Suitable for: rostfreier Stahl FAQ What does the designation CCMT09T304‑MM4 indicate? The marking CCMT09T304‑MM4 denotes form, size, thickness, corner radius and the MM4 chipbreaker so the insert can be matched to appropriate tool holders and applications. Is the WMP20S grade suitable for high heat applications in rostfreier Stahl? WMP20S, part of the Tiger·tec Silver series, is engineered for improved thermal stability and wear resistance during machining of rostfreier Stahl under medium to robust conditions. Which operations benefit most from the MM4 chipbreaker? The MM4 chipbreaker supports controlled chip formation in medium to heavier feeds, making it advantageous for stable roughing and semi‑finishing passes where chip control and process continuity matter. How does the 0.4 mm corner radius affect surface finish and strength? A 0.4 mm radius provides a compromise between edge strength and surface quality: it delivers better finish than larger radii while maintaining sufficient edge robustness for typical turning loads. Can this insert be used in standard CCMT holders? Yes; the CCMT09T304‑MM4 format is compatible with standard holders that accept CCMT‑style rhombic 80° inserts, provided correct seating and clamping are observed. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no association between our company and the named brands. The item offered is original, factory‑new goods from the manufacturer.
CCMT09T304-MM4 WMP30G WMP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance, optimised MM4 chip control and a precise 0.4 mm corner radius for reliable stainless steel turning; order the inserts directly via Metav Werkzeuge or consult our team for application advice. CCMT09T304‑MM4 WMP30G – Indexable turning insert, rhombic 80°, for stainless steel machining by Walter Tools The CCMT09T304‑MM4 WMP30G is an indexable turning insert designed for robust and consistent performance when machining stainless steel, combining a specialised chipbreaker with a Tiger‑tec Gold coated, coated‑carbide grade for improved process stability. Tiger‑tec Gold coated for extended tool life Optimised MM4 chipbreaker for stable chips Rhombic 80° form with 0.4 mm corner radius Specifically for stainless steel machining Consistent cutting performance for stainless steel components The Tiger‑tec Gold coating and the WMP30G grade deliver stable chip formation and reduced tendency to build up on the cutting edge when machining tough alloys. This combination supports predictable wear behaviour and longer edge life, which translates directly into fewer tool changes and less unplanned downtime. The coated‑carbide substrate is engineered to withstand the heat and adhesion tendencies typical of austenitic and other stainless steels, ensuring that the machining process remains efficient even under medium to more demanding cutting conditions. Geometry that improves surface finish and process reliability A rhombic 80° insert form with a 0.4 mm corner radius and a 7° clearance angle provides a balanced geometry for both finishing and light roughing passes. The compact corner radius reduces cutting forces and helps to maintain a sharp, stable edge, producing consistent surface quality and repeatable dimensional results. These geometric choices are particularly effective in turning operations where control of cutting load and thermal influences is critical for maintaining tolerances on stainless steel parts. Chip control and productivity gains with the MM4 breaker The MM4 chipbreaker is optimised for the material behaviour of stainless steel, promoting short, controllable chips and preventing long stringing that can interrupt automated cycles. Improved chip control reduces the need for operator intervention and enhances throughput; combined with the Tiger‑tec Gold wear characteristics, the insert supports sustained productivity and lower unit costs over long production runs. The result is a pragmatic blend of tool life and process security that benefits batch production and single‑piece flows alike. For reliable stainless steel turning choose Walter Tools Tiger‑tec Gold inserts through Metav Werkzeuge — contact Metav Werkzeuge for tailored recommendations and fast delivery (email info@metav-werkzeuge.com, phone +49 2822 7131930) Technical Data SKU: CCMT09T304‑MM4‑WMP30G‑WALTER Designation: CCMT09T304‑MM4 WMP30G Grade: WMP30G Series: Tiger‑tec Gold Facts Clearance angle: 7° Corner radius: 0.4 mm Insert size: 09 Thickness: T3 Special features Coating: Tiger‑tec Gold Chipbreaker: MM4 Shape: Rhombus 80° Material group: M (stainless steel application) Manufacturer: Walter Tools FAQ What materials is this insert optimised for? This insert is optimised for machining stainless steel; the WMP30G grade and Tiger‑tec Gold coating specifically address the adhesion and heat issues common with those alloys. Which chipbreaker is fitted and what benefit does it provide? The MM4 chipbreaker integrated in this insert promotes short, controllable chips and improves process stability when turning stainless steel workpieces. How does the insert geometry affect surface quality? The rhombic 80° form with a 0.4 mm corner radius and 7° clearance reduces cutting forces and helps maintain a sharp edge, resulting in consistent surface finish and dimensional repeatability. Is this insert suitable for both finishing and light roughing? Yes; the combination of corner radius, clearance angle and chip control makes the insert suitable for finishing and light roughing operations on stainless steel components. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT09T304-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance and reliable chip control for consistent production; order the insert directly via Metav Werkzeuge or consult our advisors for process-specific recommendations. CCMT09T304-MM4 WSM01 turning indexable insert — 0.4 mm radius, rhombic 80°, Walter Tools A CCMT09T304-MM4 WSM01 insert designed for robust turning and boring work in stainless steels and heat-resistant superalloys, offering a balance of cutting-edge stability and chip control for demanding machining tasks. Tiger-tec Silver coating for enhanced wear resistance Suitable for stainless steels and superalloys M / S Rhombic 80° geometry, 0.4 mm corner radius MM4 chipbreaker for reliable chip control Optimised durability and edge stability for tough materials The Tiger-tec Silver series in combination with the WSM01 grade provides a coated carbide solution optimised for materials that challenge conventional grades. The chemistry and coating promote wear resistance and protect the cutting edge against thermal loading when machining stainless steels and superalloys (material groups M and S). The rhombic outline and small radius support a robust cutting edge, while the MM4 chipbreaker fosters repeatable chip formation; together these characteristics reduce unscheduled tool changes and support steady cycle times in production environments. For further process data or to confirm suitability for a specific alloy, contact Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930. Process reliability and efficient chip management A focus on process reliability means fewer interruptions and more predictable component quality. The combination of geometry and chip control reduces the risk of built-up edge and erratic chips when turning materials that generate long, stringy swarf. The MM4 chipbreaker is designed to direct chips away from the cutting zone, improving surface finish and protecting the insert flank. With its 7° clearance and robust 0.4 mm corner radius, the insert handles moderate to demanding feeds while still enabling fine finishing passes; this balance supports economical tool life and consistent part tolerances across series production. Practical dimensions and selection guidance for tooling Key dimensions support straightforward selection for tool-holders and toolblocks: insert size 09, T3 thickness, rhombic 80° form and standard 7° clearance. The 0.4 mm corner radius is a compromise between cutting-edge strength and surface integrity — suitable for general-purpose turning where some strength at the nose is required without sacrificing finish. The CCMT designation aligns with common clamping systems, simplifying inventory management and holder compatibility checks. For application-specific recommendations and cutting-parameter ranges tailored to workpiece grade and machine capability, Metav Werkzeuge provides technical consultation to ensure optimal utilisation of the Walter Tools Tiger-tec Silver inserts. Contact Metav Werkzeuge today for tailored advice on Walter Tools Tiger-tec Silver WSM01 inserts and ensure optimal machining of stainless steels and superalloys Technical data Article number: CCMT09T304-MM4-WSM01-WALTER Designation: CCMT09T304-MM4 WSM01 Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.4 mm Plate form: Rhombic 80° Plate size: 09 Plate thickness: T3 Special features Series: Tiger-tec Silver Grade: WSM01 (coated carbide) Chipbreaker: MM4 Material groups: S / M (superalloys, stainless steels) Tolerance class: M FAQ Which materials are suitable for this insert? The CCMT09T304-MM4 WSM01 insert from Walter Tools is suitable for stainless steels (M) and heat‑resistant superalloys/titanium (S) as indicated by its WSM01 grade and Tiger‑tec Silver series. What benefit does the MM4 chipbreaker provide? The MM4 chipbreaker on this insert improves chip formation and evacuation, helping to protect the cutting edge and stabilise the machining process during turning and boring operations. How does the 0.4 mm corner radius affect results? A 0.4 mm corner radius increases edge strength and supports consistent surface quality; it is a compromise that offers durability for moderate feeds while still enabling fine finishing where required. Is this insert compatible with standard CCMT tool-holders? Yes — the CCMT designation and insert size 09 correspond to common holder systems, but it is recommended to verify clamping geometry and seat angle before use. What series and coating does this grade belong to? This item is part of the Tiger‑tec Silver series and uses the WSM01 coated carbide grade, optimised for wear resistance and thermal stability in challenging materials. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT09T304-MM4 WSM10S MM4 Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver series and the WSM10S grade for reliable machining of stainless steels and heat-resistant alloys; the result is stable chip formation and extended edge life for continuous production. Order the insert directly via Metav Werkzeuge or consult our technical advisers for process-specific recommendations. CCMT09T304-MM4 WSM10S turning insert, rhombic 80° geometry, Walter Tools The CCMT09T304-MM4 WSM10S is a coated turning and boring insert designed for demanding work on stainless steels and superalloys, combining a wear-resistant coating with a robust chipbreaker for stable metal removal. Tiger·tec Silver coating for high wear resistance Grade WSM10S for stainless and superalloys Rhombic 80° CCMT shape for versatile turning MM4 chipbreaker with 0.4 mm corner radius Proven grade and coating for demanding alloys The combination of the Tiger·tec Silver coating and the WSM10S grade provides a balance between wear resistance and edge security that is particularly beneficial when machining stainless steels and heat‑resistant superalloys. The coated carbide construction reduces flank wear and helps maintain a consistent cutting edge under high temperatures, which leads to fewer tool changes and more predictable cycle times. This performance advantage translates directly into improved throughput and lower per‑part tooling costs. Geometry and chip control that support consistent processes The Rhombus 80° form of the insert, together with a 7° free angle and a modest 0.4 mm corner radius, gives a versatile cutting geometry that supports both finishing and medium‑duty roughing operations. The MM4 chipbreaker is engineered for secure chip formation when cutting tough materials, preventing long, stringy chips and promoting safe evacuation. The T3 thickness provides the rigidity needed to resist deflection during interrupted cuts, improving dimensional stability and surface quality. Industrial benefits for production environments Applied correctly in stable toolholders, this insert contributes to greater process reliability and a consistently high surface finish on parts made from challenging materials. The design reduces the risk of built‑up edge and thermal degradation at the cutting zone, which helps extend tool life and reduces unscheduled downtime. For workshop managers this means fewer tool interventions, steadier batch quality and easier planning of maintenance intervals. The CCMT09T304-MM4 WSM10S insert from Walter Tools is therefore suited to series production where reproducibility and tool life are priorities. Discuss machining requirements with Metav Werkzeuge to identify the optimal grades and geometries for a given application, or request a process review from our specialists at Metav Werkzeuge. Technical data SKU: CCMT09T304-MM4-WSM10S-WALTER Article: CCMT09T304-MM4 WSM10S Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Core specifications Free clearance angle: 7° Corner radius: 0.4 mm Insert size: 09 Thickness: T3 Tolerance class: M Series: Tiger·tec Silver Design features Insert shape: Rhombus 80° Chipbreaker: MM4 Grade: WSM10S Material suitability: stainless steels (M), heat‑resistant superalloys/titanium (S) Material designation: coated carbide FAQ Which materials can be machined with this insert? The CCMT09T304-MM4 WSM10S insert from Walter Tools is specified for ISO group M (stainless steels) and S (heat‑resistant superalloys and titanium), making it suitable for demanding alloys that generate high temperatures and tend to work harden. What advantages does the Tiger·tec Silver series provide? Tiger·tec Silver coating on the WSM10S grade offers enhanced wear resistance and thermal stability, improving tool life and maintaining edge integrity during continuous turning operations. Is this insert suitable for both finishing and roughing? Yes. The Rhombus 80° geometry, combined with a 0.4 mm corner radius and the MM4 chipbreaker, allows the insert to perform well in finishing and moderate roughing tasks, depending on insert geometry and cutting parameters. How does the MM4 chipbreaker influence machining? The MM4 chipbreaker on the CCMT09T304-MM4 WSM10S promotes controlled chip formation for sticky or gummy materials, reducing the risk of long chips and enabling safer, more efficient material removal. What role does the 7° free angle and T3 thickness play? A 7° free angle helps reduce rubbing on the flank face, while the T3 thickness increases rigidity; together they support dimensional accuracy and resistance to vibration during interrupted or heavy cuts. Manufacturer/Responsible: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and registered trade names are used for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
CCMT09T304-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM20S grade for reliable performance in demanding materials, together with the MM4 chipbreaker for consistent chip control; order the insert directly via Metav Werkzeuge or contact the consultancy team for tailored process recommendations. CCMT09T304-MM4 WSM20S — Turning indexable insert, Tiger·tec Silver coating, Walter Tools The CCMT09T304-MM4 WSM20S is a rhombic 80° turning insert engineered for secure machining of rostfreier Stahl and heat‑resistant superalloys, combining a wear‑resistant grade with an optimised chip control geometry. Tiger·tec Silver coating for thermal stability Optimised MM4 chipbreaker for stable chips Rhombic 80° insert, 0.4 mm corner radius Robust cutting performance for difficult alloys and rostfreier Stahl The combination of the Tiger·tec Silver coating and the WSM20S carbide grade provides a significant improvement in thermal resistance and wear behaviour when machining rostfreier Stahl and other tough alloys. The multilayer coating reduces heat penetration to the carbide substrate and supports a stable cutting edge, which translates into longer tool life and fewer interruptions for insert changes. This technical advantage means smoother process windows when facing issues such as work hardening and built‑up edge, typical for these materials. Precision geometry that controls chips and improves surface quality The insert’s MM4 chipbreaker and Rhombic 80° form work together to deliver predictable chip formation and controlled evacuation during turning. The 0.4 mm corner radius and 7° clearance angle (freedom for clearance) offer a balance between edge strength and finishing capability, making the geometry suitable for medium to light roughing and semi‑finishing passes. The T3 thickness adds rigidity at the cutting edge, which helps maintain dimensional stability and contributes to improved component surface quality with fewer rework cycles. Productivity benefits and economical tool life By favouring stable chip control and high thermal stability, this insert reduces the risk of unplanned downtime and tool‑related rejects. The grade’s resistance to softening at elevated temperatures supports consistent cutting performance across longer running times, which yields better utilisation of machining centres and a lower cost per part in high‑mix production. The rhombic insert form also enables flexible indexing options, allowing multiple cutting edges per insert to be employed before disposal. Typical applications and process recommendations Designed for machining rostfreier Stahl and demanding superalloys (ISO groups M and S), the insert performs well where heat management and edge stability are critical. Preferred uses include interrupted and continuous turning of workpieces prone to strain‑hardening or thermal build‑up. For best results, pair the insert with a rigid toolholder, maintain stable cutting parameters, and use coolant strategies appropriate to the workpiece material and cycle times. For additional machining data or adaptation to a specific machine set‑up, Metav Werkzeuge offers technical support and material‑specific recommendations. Contact Metav Werkzeuge for tailored cutting data and to request the CCMT09T304-MM4 WSM20S insert from Walter Tools; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data SKU: CCMT09T304-MM4-WSM20S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCMT09T304-MM4 WSM20S Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WSM20S Chipbreaker: MM4 Core technical values Clearance angle: 7° Corner radius: 0.4 mm Thickness: T3 Shape: Rhombus 80° Size designation: 09 Special features and applicability Coating: Tiger·tec Silver Carbide grade: WSM20S (coated cemented carbide) Material applicability: rostfreier Stahl; heat‑resistant superalloys and titanium (ISO groups M and S) Tolerance class: M Insert designation: CCMT09T304-MM4 FAQ Which materials are best machined with this insert? The CCMT09T304-MM4 WSM20S insert is intended primarily for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S); the WSM20S grade supports secure chip formation and edge stability in these challenging materials. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WSM20S grade increases thermal resistance and reduces wear, which helps the CCMT09T304‑MM4 insert maintain a consistent cutting edge and extend useful tool life under elevated cutting temperatures. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker produces controlled chip shapes and improves evacuation, reducing the likelihood of chip entanglement and promoting steadier cutting forces; this benefits surface finish and reduces machine interruptions. Is the insert suitable for finishing passes? With a 0.4 mm corner radius and Rhombic 80° geometry, the insert is appropriate for semi‑finish and finish operations where a balance of edge strength and surface quality is required; final results depend on cutting parameters and holder rigidity. What is the full designation for ordering? Order under the designation CCMT09T304‑MM4 WSM20S (Walter Tools); the SKU is CCMT09T304‑MM4‑WSM20S‑WALTER. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Walter Tools is part of a leading group in precision machining solutions. Protected trademarks and product names belong to their respective owners. Mention of brand names serves explanation only; there is no affiliation between Metav Werkzeuge and the mentioned manufacturers. The offered item is original, factory‑new product of the manufacturer.
CCMT09T304-MM4 WSM30S MM4 Wendeplatten - Walter Tools
Take advantage of the combination of high thermal resistance, stable chip control, and proven insert geometry for dependable machining of stainless steels and heat-resistant alloys; order directly via Metav Werkzeuge or consult our specialists for application-matched advice. CCMT09T304-MM4 WSM30S turning and drilling indexable insert by Walter Tools — Tiger·tec Silver, MM4 chipbreaker CCMT09T304-MM4 WSM30S is an indexable insert designed for combined drilling/boring and turning applications, optimised for stainless steels and heat-resistant superalloys where heat resistance and edge stability are critical Tiger·tec Silver coating for heat resistance Optimised MM4 chip control Rhombic 80° form for versatile insert use 7° clearance with 0.4 mm corner radius High-temperature performance that stabilises the process The WSM30S grade from the Tiger·tec Silver series is a coated carbide solution engineered for materials that generate high cutting temperatures and tend to form built-up edge. Its microstructure and coating support a stable cutting edge and reduced adhesion, which in turn lowers the risk of premature wear and unplanned rework. As a result, the insert sustains consistent performance in interrupted cuts and demanding stainless steel operations while maintaining surface integrity. Geometry and chip control that improve productivity The Rhombic 80° insert geometry combined with the MM4 chipbreaker provides controlled chip formation across a range of feeds and depths of cut. The 7° clearance and 0.4 mm corner radius help to distribute cutting forces and reduce vibration, delivering a reliable balance between edge strength and surface finish. For shops seeking predictable chip flow and fewer machine stoppages, this geometry reduces manual chip handling and supports smoother cycle times. Practical specification for stable repeatability and handling Produced to tolerance class M, the insert’s T3 thickness and size 09 format make it compatible with a wide range of standard toolholders for drilling/boring and turning indexable applications. The combination of grade and form is tailored to deliver process reliability when machining rostfreier Stahl and heat-resistant alloys, offering an economical route to longer tool life and less frequent index changes. The insert’s characteristics simplify setup and reduce inspection time during production runs. For tailored selection support or to secure supply through Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for specialist advice and fast fulfilment. Technical Data Article number: CCMT09T304-MM4-WSM30S-WALTER Designation: CCMT09T304-MM4 WSM30S Series: Tiger·tec Silver Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.4 mm Size: 09 Thickness: T3 Special features Coating / grade: WSM30S Chipbreaker: MM4 Material suitability: S / M Tolerance class: M Shape: Rhombic 80° Application: Designed for stainless steels and heat‑resistant superalloys FAQ Which materials are suitable for this insert? The CCMT09T304-MM4 WSM30S insert from Walter Tools is intended primarily for rostfreier Stahl (stainless steels) and heat‑resistant superalloys (ISO groups M and S), offering improved edge life in tough, heat‑generating materials. What benefits does the MM4 chipbreaker deliver? The MM4 chipbreaker on the CCMT09T304-MM4 WSM30S creates consistent chip segmentation and evacuation, which reduces machine downtime and improves surface finish during turning and drilling operations. Is the geometry suitable for both turning and boring? Yes — the Rhombic 80° form and the insert’s dimensions allow versatile use in both drilling/boring and turning applications, providing a balance between cutting edge strength and accessibility in a variety of toolholders. What does tolerance class M mean for shop practice? Tolerance class M indicates machining and seating accuracy appropriate for stainless and heat‑resistant materials, supporting repeatable clamping and minimal runout when fitted to compliant toolholders. How does the Tiger·tec Silver series affect tool life? The Tiger·tec Silver technology used on WSM30S enhances thermal stability and wear resistance, which typically leads to longer intervals between index changes and more stable performance in high‑temperature cutting scenarios. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, factory‑new merchandise from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
CCMT09T304-MP4 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the WEP10C cermet grade and the MP4 chipbreaker to achieve consistent finishing results with low wear; the rhombus 80° geometry and 7° relief angle support efficient edge life and stable cutting. Order the CCMT09T304-MP4 WEP10C inserts directly via Metav Werkzeuge or request application advice from the consultants. CCMT09T304-MP4 WEP10C cermet turning insert — Walter Tools, rhombus 80°, MP4 chipbreaker The CCMT09T304-MP4 WEP10C is a cermet indexable insert designed for precise finishing and semi-finishing turning operations where surface quality and repeatable edge life are required Walter Cermet grade WEP10C Rhombus 80° insert geometry MP4 chipbreaker for fine finishing 0.4 mm corner radius, 7° relief Consistent finishes through cermet performance The Walter Cermet WEP10C grade combines wear resistance with a fine cutting edge, making it particularly suited to finishing passes where surface integrity matters. As a cermet material, the grade offers improved hot hardness and edge stability compared with conventional carbides, which reduces built-up edge and helps maintain dimensional consistency. The result is a predictable tool life and improved batch-to-batch repeatability when the grade is applied in the correct cutting window. Suitability across workpiece materials should be verified in the product matrix to ensure the best match for the intended application. Machining advantages from geometry and chip control The rhombus 80° geometry provides a good balance between tool strength and access to the cutting zone, while the MP4 chipbreaker is optimised for fine finishing, producing short, manageable chips under light to moderate depths of cut. The modest 0.4 mm corner radius supports delicate edge transitions, enhancing surface finish without compromising edge stability. The 7° relief angle reduces rubbing at the flank face, lowering cutting forces in finishing passes and contributing to improved workpiece surface quality. Together, these attributes make the insert an effective choice where consistent finishes and reliable chip control are priorities. Practical integration and economic handling in the toolroom Designed as an indexable turning insert with designation CCMT, the component fits standard toolholders and is available in thickness code T3, tolerance class M, and plate size 09, enabling straightforward replacement and inventory management. The cermet grade and chipbreaker combination reduce the need for frequent re-grind cycles, supporting efficient shop-floor workflows and predictable tool-change planning. For application-specific recommendations or assistance with holder selection, Metav Werkzeuge provides tailored advice and can supply compatible components to ensure rapid integration into existing turning systems. Contact Metav Werkzeuge for tailored tooling recommendations and fast availability of Walter Tools CCMT inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CCMT09T304-MP4-WEP10C-WALTER Designation: CCMT09T304-MP4 WEP10C Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCMT09T304-MP4 WEP10C Walter Tools Manufacturer: Walter Tools Series: Walter Cermet Facts Relief angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 80° Plate size: 09 Thickness: T3 Tolerance class: M Special features Grade: WEP10C (cermet) Chipbreaker: MP4 Execution: T Material: Katalogabhängig ISO designation: CCMT09T304-MP4 WEP10C FAQ What materials is this insert best suited to? The CCMT09T304-MP4 WEP10C insert uses a cermet grade that is optimised for finishing applications; material suitability should be checked against the product matrix to confirm compatibility with specific steels, alloys or other workpiece materials. How does the MP4 chipbreaker affect surface finish? The MP4 chipbreaker is designed for fine finishing, promoting short chip formation and stable cutting conditions that contribute to a consistent surface quality when using the CCMT09T304-MP4 WEP10C insert. Can the rhombus 80° geometry be used for light profiling? Yes, the rhombus 80° geometry offers a good compromise between cutting edge access and robustness, making it suitable for light profiling and finishing passes where controlled cutting engagement is required. What does the thickness code T3 indicate for tool mounting? The T3 thickness designation indicates the insert thickness series and ensures compatibility with toolholders specified for that thickness; verify holder compatibility to maintain clamping integrity and repeatable performance. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com
CCMT09T304-MP4 WPP10G - Walter Tools
Combine the Tiger·tec Gold coating with the MP4 chipbreaker and the compact Rhombus 80° geometry to achieve reliable steel machining and consistent surface quality; order the CCMT09T304‑MP4 WPP10G through Metav Werkzeuge or consult the technical advisors for application support. CCMT09T304-MP4 WPP10G – Rhombic 80° turning/boring insert, Tiger·tec Gold (Walter Tools) The CCMT09T304‑MP4 WPP10G is a coated carbide indexable insert for turning and boring steel, designed for stable chip formation and long tool life in general steel applications. Tiger·tec Gold coating technology Designed for steel machining (ISO P) MP4 chipbreaker for controlled chip formation 0.4 mm corner radius for consistent surface finish Optimised performance for steel turning operations The combination of Tiger·tec Gold coating and a dedicated MP4 chipbreaker provides a balance between wear resistance and consistent chip control, which helps maintain cutting performance over longer cycles. The coating improves thermal stability and reduces flank wear during continuous operation, while the chipbreaker is shaped to manage chip flow in typical steel cutting conditions. For shops aiming to increase uptime and reduce insert change frequency, this geometry delivers a measurable improvement in process stability and predictable tool life. Geometry that protects the workpiece and supports surface quality A Rhombus 80° form with a 0.4 mm corner radius gives a robust cutting edge that supports moderate finishing and semi‑roughing passes without excessive deflection. The nominal 7° clearance angle reduces rubbing on the flank while maintaining effective cutting engagement, which translates into consistent surface finish and reduced risk of built‑up edge when machining unalloyed and alloyed steels. The insert’s design helps achieve reproducible results across tool changes and operators. Practical benefits for production planning and tool selection The insert’s designation and tolerance class (M) support straightforward interchangeability in established toolholder systems that accept CCMT‑type inserts. The T3 thickness designation and size code 09 make it compatible with common clamping tools, simplifying inventory management. Specifying a coated, industry‑grade insert like this one can reduce the frequency of regrinds and the number of different grades held in stock, yielding a clearer cost‑benefit in medium‑ to high‑volume turning operations. Material suitability and application guidance This grade, WPP10G, is formulated for steel (ISO P) and offers an application range from wear‑resistant to universal to tougher grades as denoted by the manufacturer’s classification. The coated carbide substrate resists abrasive wear and thermal softening during typical speeds for steel turning. Use the insert where reliable chip control and repeatable surface quality are priorities, for instance in longitudinal turning, light profiling and certain boring operations where CCMT geometry fits the toolholder. For stainless or specialised alloys, select a grade specified for those materials. Discuss Walter Tools Tiger·tec Gold applications with Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and application advice Technical data Article number: CCMT09T304-MP4-WPP10G-WALTER Designation: CCMT09T304‑MP4 WPP10G Manufacturer: Walter Tools Core data Clearance angle: 7° Corner radius: 0.4 mm Insert size: 09 Thickness designation: T3 Special features Series: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: MP4 Insert shape: Rhombus 80° Tolerance class: M FAQ Which materials is this insert intended for? The CCMT09T304‑MP4 WPP10G is intended for steel machining (ISO P) and is optimised for unalloyed and alloyed steels. What advantages does the Tiger·tec Gold series provide? Tiger·tec Gold coating offers improved thermal resistance and reduced flank wear, enhancing the insert’s performance in continuous steel turning operations. How does the MP4 chipbreaker influence machining? The MP4 chipbreaker on this indexable insert promotes controlled chip formation and safe evacuation, supporting reliable production cycles when machining steel. Is the insert suitable for finishing passes? With a 0.4 mm corner radius and Rhombus 80° geometry, the insert is suited to light finishing and semi‑finishing cuts that prioritise surface consistency. What does the tolerance class M indicate? Tolerance class M denotes a medium tolerance level for dimensional accuracy, ensuring good repeatability when swapping inserts in compatible CCMT toolholders. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not imply any affiliation with our company. The offered item is an original, factory‑new product of the manufacturer Walter Tools. The Walter brand is part of the Walter AG group and is presented here for identification and technical clarity.
CCMT09T304-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Gold coating and the WPP20G universal grade for efficient steel machining; the CCMT geometry with a 0.4 mm corner radius and 7° clearance delivers consistent chip control and dependable tool life. Order directly via Metav Werkzeuge or consult their specialists for matching insert and holder recommendations. CCMT09T304-MP4 WPP20G – Indexable turning insert, Tiger‑tec Gold coating for steel (Walter Tools) A CCMT09T304‑MP4 WPP20G indexable turning insert engineered for productive steel turning, combining a Tiger‑tec Gold coated carbide grade with an MP4 chipbreaker and rhombic 80° geometry for versatile operations Tiger‑tec Gold coating for improved tool life Universal WPP20G grade optimised for steel Rhombic 80° geometry for versatile turning MP4 chipbreaker for reliable chip control High productivity through a coated grade optimised for steel The Tiger‑tec Gold coating in combination with the WPP20G grade provides a wear‑resistant, coated carbide substrate that is tailored to the heat and chip formation typical of steel machining. This combination promotes stable chip formation and extended tool life, which reduces changeover frequency and supports continuous production. The result is a measurable improvement in process efficiency and predictable machining outcomes when turning unalloyed and alloyed steels. Geometry and chip control that support consistent surface quality Rhombic 80° geometry paired with the MP4 chipbreaker yields flexible approach angles and dependable chip guidance across a range of turning tasks. The insert’s 0.4 mm corner radius and 7° clearance contribute to controlled engagement and a fine surface finish in finishing passes, while also enabling short‑chipping conditions in semi‑roughing. The chipbreaker design assists in breaking and evacuating chips reliably, lowering the risk of built‑up edge and protecting the workpiece from rework. Practical fit for workshop toolsets and process security With a standard insert size designation and T3 thickness in tolerance class M, the insert integrates into common indexable turning toolholders for straight‑forward set‑up. The universal characteristics of the grade support a broad spectrum of steel applications, delivering process security and repeatable results. Operators benefit from reduced downtime due to predictable wear behaviour and easy placement into existing tool systems, supporting both small batch and higher volume production runs. For application advice or to secure compatible toolholders for Walter Tools’ Tiger‑tec Gold inserts, contact Metav Werkzeuge for tailored recommendations at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: CCMT09T304-MP4-WPP20G-WALTER Designation: CCMT09T304-MP4 ISO designation: CCMT09T304-MP4 WPP20G Manufacturer: Walter Tools Grade: WPP20G Series: Tiger‑tec Gold Facts Relief angle: 7° Corner radius: 0.4 mm Insert form: Rhombic 80° Insert size: 09 Thickness: T3 Tolerance class: M Special features Coating: Tiger‑tec Gold (coated carbide) Chipbreaker: MP4 Geometry: Rhombic 80° Material application: Steel FAQ What materials is this insert intended for? The insert is specified for machining steel; the WPP20G grade is formulated to manage the heat and chip formation typically encountered when turning unalloyed and alloyed steels. How does the MP4 chipbreaker affect machining? The MP4 chipbreaker is designed to produce short, controllable chips and aid safe evacuation, improving process stability and surface finish during both semi‑finishing and finishing turns. Is the 0.4 mm corner radius suitable for finishing? A 0.4 mm corner radius balances edge strength and surface quality, making it suitable for fine finishing passes where a good surface is required while maintaining sufficient robustness. What does tolerance class M indicate for this insert? Tolerance class M denotes standard manufacturing tolerances for the insert dimensions, supporting consistent seating and repeatable positioning in compatible toolholders. Can this insert be used in existing toolholders? The insert follows common CCMT form and size conventions and, given the stated thickness T3 and rhombic geometry, is compatible with standard indexable turning toolholders designed for CCMT inserts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, factory‑new product from the manufacturer.
CCMT09T304-MP6 WPP10G Wendeplatten - Walter Tools
High wear resistance and predictable chip control from the Tiger·tec Gold grade combine with a compact MP6 chipbreaker and a 0.4 mm corner radius for reliable finishing of steel components. Order the insert directly via Metav Werkzeuge or consult their specialists for application-specific recommendations. CCMT09T304-MP6 WPP10G turning insert — MP6 chipbreaker, Rhombus 80°, Walter Tools The CCMT09T304-MP6 WPP10G is a rhombic 80° turning insert designed for efficient machining of steel in serial and finishing applications. Tiger·tec Gold coating for longer life MP6 chipbreaker for reliable chip control 0.4 mm corner radius for fine finishing Rhombic 80° form with 7° clearance Consistent productivity for steel turning The CCMT09T304-MP6 WPP10G delivers a balance of tool life and cutting performance thanks to the combination of the Tiger·tec Gold coating and a purpose-built MP6 chipbreaker. The coated carbide substrate stabilises the cutting edge under thermal load, which reduces flank wear and supports steady cutting conditions over longer cycles. For production environments this translates into fewer tool changes and more consistent component tolerances, improving throughput without sacrificing surface quality. Coating and material compatibility explained The insert is a coated carbide grade optimised for the ISO group P (steel). The Tiger·tec Gold technology combines wear-resistant layers with controlled adhesion to combat built-up edge and maintain a sharp cutting line at elevated temperatures. For machinists working with unalloyed or alloyed steel, this means improved resistance to abrasion and thermal softening. The result is predictable cutting behaviour and a reduced risk of unexpected rework in batch manufacturing. Geometry that enhances finish and reliability A rhombic 80° form with a 0.4 mm corner radius and a 7° clearance angle provides a compromise between strength and finesse. The moderate corner radius aids in producing a smooth surface finish while maintaining edge stability during interrupted cuts; the MP6 chipbreaker guides chips away from the cutting zone to prevent re-cutting. The plate thickness T3 and tolerance class M support repeatable clamping and dimensional conformity in automated toolholders, helping to protect both insert and workpiece integrity. Economic benefits and process integration Selecting this grade and geometry supports a cost-effective machining strategy: longer edge life reduces consumable spend, while consistent chip control lowers cleaning and machine downtime. The insert interfaces seamlessly with standard CCMT toolholders, allowing swift integration into existing setups. For manufacturers seeking steady results in serial turning of steel components, the combination of Tiger·tec Gold, MP6 chip control and robust geometry yields measurable gains in productivity and quality. Discuss machining parameters with Metav Werkzeuge to exploit Tiger·tec Gold performance for steel turning; contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: CCMT09T304-MP6-WPP10G-WALTER Product: Turning insert Designation: CCMT09T304-MP6 WPP10G Brand: Walter Tools Series: Tiger·tec Gold Facts Corner radius: 0.4 mm Clearance angle: 7° Insert size: 09 Plate thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Gold Material: coated carbide Chipbreaker: MP6 Suitable for: steel (ISO P) Shape: Rhombus 80° Series/sort description: WPP10G (wear-resistant grade for steel machining) FAQ What materials is this insert suitable for? The CCMT09T304-MP6 WPP10G turning insert (Walter Tools) is specified for steel machining under ISO group P and is designed to handle typical heat and chip formation encountered with unalloyed and alloyed steels. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the CCMT09T304-MP6 WPP10G reduces abrasive wear and improves thermal stability of the cutting edge, resulting in longer tool life and more consistent surface quality when turning steel. Which chipbreaker is fitted and what is its benefit? This insert uses the MP6 chipbreaker, which promotes controlled chip formation and evacuation, lowering the risk of chip entanglement and improving process reliability during continuous turning operations. Is the insert compatible with standard CCMT toolholders? Yes, the geometry and T3 thickness of the CCMT09T304-MP6 WPP10G are compatible with standard CCMT toolholders, enabling straightforward replacement and integration into existing turning setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT09T304-MP6 WPP20G Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold coating and the MP6 chipbreaker ensures consistent edge life and stable chip control for steel turning; the rhombic 80° geometry with a 0.4 mm corner radius delivers improved surface finish and reliable process results. Order directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. CCMT09T304-MP6 WPP20G Walter Tools — indexable turning insert with Tiger‑tec Gold coating for steel The CCMT09T304-MP6 WPP20G is an indexable turning insert engineered for productive steel machining, combining a robust MP6 chipbreaker with the Tiger‑tec Gold coated grade for long tool life. Tiger‑tec Gold coating for extended lifetime MP6 chipbreaker for stable chip control Rhombic 80° geometry for versatile turning Deliver consistent edge life and predictable machining economy The Tiger‑tec Gold coating and the WPP20G grade provide wear resistance and thermal stability designed specifically for machining steel (ISO P). This combination reduces flank wear and prolongs cutting-edge service life, which contributes directly to lower tool-change frequency and improved overall machining economy. Coated carbide grades such as this are optimised for the heat and chip formation typical when turning unalloyed and alloyed steels, resulting in reproducible performance across batch and single‑piece production. Achieve reliable chip control and improved surface quality The MP6 chipbreaker is tuned to produce short, manageable chips on typical steel turning tasks, reducing the risk of chip entanglement and supporting uninterrupted cycle times. Together with the 0.4 mm corner radius and the 7° clearance angle, the geometry helps to produce stable cutting forces and a finer surface finish. The rhombic 80° form gives a balanced mix of cutting-edge strength and accessibility for medium‑depth turning operations, enabling clean finishes with reduced vibration. Versatile insert design for workshop efficiency The insert’s shape and size designation (09, thickness T3) make it compatible with a wide range of standard toolholders, simplifying stocking and tool‑holder logistics on the shop floor. The tolerance class M ensures dependable interchangeability between inserts, supporting consistent set‑up and repeatable results. Designed for steel applications, this insert suits both serial production and flexible jobbing environments where process reliability and predictable tool behaviour are essential. Practical advantages at the machine and in procurement As an indexable insert, the item removes the need for regrinding and simplifies tool inventory management: only the worn insert is replaced, not the entire tool. The coated grade’s emphasis on stable chip formation and good edge retention reduces downtime and permits longer uninterrupted runs. For application matching, the grade is particularly suited to the typical heat generation and chip characteristics when turning steel, facilitating straightforward selection and predictable machining performance. For tailored advice on optimising Walter Tools Tiger‑tec Gold inserts for steel turning, contact Metav Werkzeuge to discuss tooling strategies and application-specific recommendations. Technical data Article number: CCMT09T304-MP6-WPP20G-WALTER Designation: CCMT09T304-MP6 Full designation: CCMT09T304-MP6 WPP20G Series: Tiger‑tec Gold Manufacturer: Walter Tools Core technical data Size: 09 Thickness: T3 Corner radius: 0.4 mm Clearance angle: 7° Geometry: Rhombic 80° Grade: WPP20G Chipbreaker: MP6 Tolerance class: M Special features Coating: Tiger‑tec Gold Applicable material group: Steel (ISO P) Execution/style: T Optimised for stable chip formation and productive machining FAQ What materials is this insert intended for? The CCMT09T304‑MP6 WPP20G insert is specified for machining steel (ISO P) and is designed to handle the heat and chip formation typical of unalloyed and alloyed steels. How does the MP6 chipbreaker affect machining? The MP6 chipbreaker promotes short, controllable chips and steady cutting forces, which supports continuous machining and reduces the chance of chip-related interruptions when using this Walter Tools insert. Can the insert be used for finishing operations? With a 0.4 mm corner radius and the rhombic 80° geometry, the insert suits medium finishing and general turning tasks, providing a good balance between surface quality and edge strength. What benefits does the Tiger‑tec Gold coating provide? Tiger‑tec Gold coating on the WPP20G grade enhances wear resistance and thermal stability during steel turning, improving edge life and enabling more predictable tool performance. Is the insert compatible with standard toolholders? The 09 size and T3 thickness correspond to common indexable insert standards, making the component compatible with a wide range of standard turning toolholders engineered for CCMT‑style inserts. Markennamen und geschützte Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
CCMT09T304-MP6 WPP30G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating, the MP6 chipbreaker geometry and the robust rhombic 80° form delivers reliable edge life and consistent chip control for steel machining. Order the insert directly via Metav Werkzeuge or consult our specialists for process optimisation and cutting data. CCMT09T304-MP6 WPP30G — Indexable turning insert, Tiger·tec Gold coating, for steel (Walter Tools) The CCMT09T304-MP6 WPP30G is a rhombic 80° indexable turning insert engineered for steel machining, offering coated carbide wear resistance and a geometry optimised for stable chip formation. Tiger·tec Gold coating for long tool life Optimised chip control MP6 geometry Rhombic 80° CCMT form, 7° relief Suitable for steel machining (ISO P) Maximised tool life and dependable process security The combination of the Tiger·tec Gold coating and the WPP30G grade creates a surface treatment and substrate pairing that resists abrasive and adhesive wear during the cyclic heat loads typical of steel turning. As a coated carbide insert, it offers predictable flank wear progression, which supports longer periods between tool changes and more consistent part quality. The economical performance of this grade is reflected in stable cutting results under standard finishing and medium-cutting conditions, making it suitable for production environments that prioritise uptime and repeatability. Precise chip control for consistent surface finish The MP6 chipbreaker geometry is developed to manage chips in common steel applications, reducing the risk of snarled swarf and improving evacuation at moderate feed rates. The CCMT rhombic 80° form with 7° relief and a 0.4 mm corner radius balances cutting-edge strength and accessibility for entering contours and shoulders. The controlled chip formation contributes directly to a consistent surface finish and lowers the likelihood of built-up edge, which in turn reduces scrap rates and downstream rework in series machining. Practical guidance for steel machining and application scope Designed for the ISO P group, this insert performs well on unalloyed and alloyed steel, where typical thermal and metallurgical conditions demand a resilient grade. The T3 insert thickness yields good rigidity in standard toolholders while the rhombic geometry facilitates indexability and economical corner usage. For roughing to finishing operations, select feeds and depths that match the toolholder stiffness and machine power; the grade’s behaviour supports a broad window of cutting parameters, helping to simplify tool selection across mixed steel jobs. For tailored recommendations on Walter Tools inserts with Tiger·tec Gold coating, contact Metav Werkzeuge for application advice and availability: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: CCMT09T304-MP6-WPP30G-WALTER Label: Drehwendeschneidplatte CCMT09T304-MP6 WPP30G Walter Tools Product type: Drehwendeschneidplatte (indexable turning insert) Manufacturer: Walter Tools ISO designation: CCMT09T304-MP6 WPP30G Facts Relief angle: 7° Corner radius: 0.4 mm Shape: Rhombic 80° Insert size: 09 Thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Gold Carbide grade: WPP30G (coated carbide) Chipbreaker: MP6 Application: Steel (ISO P) Series: Tiger-tec Gold Geometry: CCMT rhombic 80° FAQ What steels is this insert best suited for? The CCMT09T304-MP6 WPP30G is designed for ISO P materials and performs reliably on unalloyed and alloyed steel where typical heat and chip behaviour occurs. How does the MP6 chipbreaker affect machining? The MP6 geometry promotes controlled chip formation and evacuation in steel turning, which supports consistent surface quality and reduces the risk of chip-related interruptions. What does the WPP30G grade provide? WPP30G, part of the Tiger·tec Gold series, offers a balanced combination of wear resistance and toughness for productive machining across a broad range of steel applications. Which features improve edge stability during interrupted cuts? The rhombic 80° CCMT form, the 0.4 mm corner radius and the coated-carbide substrate together enhance edge strength and resistance to impact during light interruptions and entry cuts. Can this insert be indexed to use multiple cutting corners? Yes, the CCMT form allows indexing to utilise several corners, helping to extend usable tool life and reduce tooling costs per part. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT09T304-MW4 WKK20S Wendeplatten - Walter Tools
Benefit from the Tiger‑tec Silver coating and the MW4 chipformer for productive, abrasion‑resistant cast‑iron turning; order the CCMT09T304‑MW4 WKK20S insert directly via Metav Werkzeuge or consult our specialists for application advice. CCMT09T304-MW4 CCMT09T304-MW4 WKK20S indexable turning insert for cast iron — Walter Tools A robust CCMT09T304‑MW4 WKK20S indexable turning insert optimised for efficient machining of cast‑iron components in industrial turning applications Tiger‑tec Silver coating for long tool life Optimised MW4 chipformer for short chips 7° clearance angle, 0.4 mm corner radius Rhombic 80° shape for versatile turning Increased productivity through advanced coating and chip control The combination of the Tiger‑tec Silver coating and the WKK20S grade delivers enhanced resistance to abrasive wear and improved edge stability when machining cast iron. The coated carbide substrate is formulated for the specific demands of grey and nodular cast irons, which typically produce short, brittle chips. The integrated MW4 chipformer supports consistent chip breaking, reducing interruptions and increasing machining uptime. As a result, cycle times are shortened and tool change frequency is reduced, supporting a more productive turning process. Reliable surface quality and robust edge geometry The rhombic 80° geometry with a 0.4 mm corner radius provides a balanced combination of strength and finishing capability: the radius reinforces the cutting edge for interrupted cuts while still enabling good surface finish on workpieces. The modest 7° clearance angle minimises rubbing and helps maintain stable cutting conditions over longer tool life. A tolerance class M ensures repeatable seat fit and positioning in standard toolholders, supporting process stability and predictable results in series production. Versatile, application‑oriented design for shopfloor use Designed as an indexable turning insert, the plate format (size 09, thickness T3) and the rhombic form make it suitable for a range of turning tasks, from roughing to finishing passes in cast‑iron components. The grade and geometry combination favours short, easily controlled chips, which helps to keep the machining area clean and reduces rework risk. The insert is compatible with standard clamping systems and is a practical choice where consistent chip control and tool life are priorities. For further technical clarification or recommendations on parameter settings, Metav Werkzeuge provides detailed consultation by email or phone. For productive cast‑iron turning with Walter Tools' proven Tiger‑tec Silver grade, contact Metav Werkzeuge for ordering and tailored technical advice: info@metav-werkzeuge.com, +49 2822 7131930. Technical data Article number: CCMT09T304-MW4-WKK20S-WALTER Designation: CCMT09T304-MW4 WKK20S Product type: Indexable turning insert (drehwendeschneidplatte) Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.4 mm Plate size: 09 Plate thickness: T3 Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WKK20S (coated carbide) Chipformer: MW4 Plate form: Rhombic 80° Material application: Cast iron (K) Robust cutting edge for interrupted cuts FAQ What materials is this insert designed for? The CCMT09T304‑MW4 WKK20S from Walter Tools is designed primarily for cast iron machining and is optimised for the abrasive wear and short chip behaviour typical of these materials. How does the MW4 chipformer affect machining? The MW4 chipformer produces reliably short chips in cast‑iron turning, reducing chip control issues and improving process continuity when using the CCMT09T304‑MW4 WKK20S insert. Which toolholders are compatible with this insert? The rhombic 80° format and tolerance class M ensure compatibility with standard indexable turning toolholders that accept CCMT‑style inserts; correct clamping and seat condition remain essential for optimal performance. What benefits does the Tiger‑tec Silver coating provide? Tiger‑tec Silver coating improves abrasion resistance and edge life under the high‑wear conditions of cast‑iron turning, enhancing productivity and reducing tool change frequency for the Walter Tools insert. Can this insert be used for finishing cuts? Yes; the 0.4 mm corner radius and rhombic geometry balance edge strength and surface finish capability, making the insert suitable for both roughing and certain finishing passes in cast iron. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are used for explanatory purposes only. There is no connection between our company and the mentioned brands. The item offered is original, brand‑new merchandise from the manufacturer.
CCMT09T304-MW4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold performance and the WPP10G grade for stable chip formation and extended tool life in Stahl turning operations; the combination of a reliable MW4 chipbreaker, a 7° clearance angle and a 0.4 mm corner radius supports consistent surface quality and process security. Order the insert directly via Metav Werkzeuge or request application advice from the consultants. CCMT09T304-MW4 WPP10G – Turning indexable insert for Stahl | Walter Tools The CCMT09T304-MW4 WPP10G is a rhombic 80° coated-carbide turning insert optimised for general-purpose Stahl machining, combining Tiger·tec Gold coating with a robust chipbreaker for reliable production. Tiger·tec Gold coating for high wear resistance MW4 chipbreaker for consistent chip control 7° clearance angle for secure cutting action Rhombic 80° form with 0.4 mm corner radius Boosted tool life through advanced coating technology The Tiger·tec Gold coating and the WPP10G grade are engineered for high wear resistance under the thermal and mechanical loads typical of ISO P applications. Because the cut is influenced by temperature and friction, the coated-carbide chemistry reduces flank wear and prolongs tool life, which in turn lowers machining costs and increases uptime. The coated surface also contributes to consistent edge behaviour, enabling predictable dressing intervals and fewer unscheduled tool changes. Stable cutting geometry for improved surface quality The insert’s Rhombic 80° geometry combined with the 0.4 mm corner radius and 7° clearance angle provides a balance between strength and finish. The MW4 chipbreaker promotes short, controllable chips in a range of cutting conditions, which reduces the risk of surface damage and improves process security. The plate thickness T3 ensures sufficient edge support, minimising vibration and helping to maintain dimensional repeatability in serial turning operations. Broad applicability and productivity in Stahl machining Designed for the ISO P material group, the insert covers a spectrum from wear-resistant to tougher Stahl ranges, as described in the Tiger·tec Gold series classification. The combination of geometry and grade supports both finish and light-medium roughing passes, allowing productive tool use across common turning tasks. Process planners will appreciate the predictable chip control and robust edge life, which simplify cutting-parameter selection and reduce downtime for regrinding or replacement. Contact Metav Werkzeuge for application-specific recommendations on Walter Tools Tiger·tec Gold inserts and to arrange supply of the CCMT09T304-MW4 WPP10G; specialists are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: CCMT09T304-MW4-WPP10G-WALTER Designation: Drehwendeschneidplatte CCMT09T304-MW4 WPP10G Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Plate form: Rhombus 80° Size: 09 Corner radius: 0.4 mm Clearance angle: 7° Thickness: T3 Chipbreaker: MW4 Tolerance class: M Special features Grade: WPP10G Coating: Tiger·tec Gold (coated carbide) Material group: ISO P (Stahl) Execution: T Series notes: Optimised for stable chip formation and broad Stahl coverage FAQ What materials is this insert suitable for? The CCMT09T304-MW4 WPP10G from Walter Tools is specified for the ISO P material group and is therefore suitable for machining a wide range of Stahl grades. How does the MW4 chipbreaker affect performance? The MW4 chipbreaker on this insert promotes short, controllable chips and consistent chip flow, improving surface quality and reducing the risk of chip-related interruptions during turning with the CCMT09T304-MW4 WPP10G. Which advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold coating on the WPP10G grade enhances wear resistance and edge stability under elevated temperatures, resulting in longer tool life and more predictable machining performance in Stahl turning. Is the 0.4 mm corner radius suitable for finishing? A 0.4 mm corner radius offers a compromise between strength and finish: the radius supports a stable cutting edge while enabling a good surface result in light to medium finishing passes with the CCMT09T304-MW4 WPP10G. Can this insert be used for roughing and finishing operations? Yes, the combination of geometry, T3 thickness and the WPP10G grade allows the insert to be applied for both productive roughing and reliable finishing in many Stahl turning scenarios. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, brand-new product from the manufacturer.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com