Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCMT09T308-FM4 WSM30S FM4 Wendeplatten - Walter Tools
Taking advantage of the Tiger·tec Silver coating and the WSM30S grade, this indexable insert offers enhanced wear resistance and stable chip formation when machining demanding stainless steels and heat‑resistant superalloys; order or request guidance from Metav Werkzeuge for fast procurement and application advice. CCMT09T308-FM4 WSM30S indexable turning insert, Tiger·tec Silver – for stainless steels and superalloys | Walter Tools The CCMT09T308-FM4 WSM30S is an indexable turning insert designed for robust performance in machining stainless steels and heat‑resistant superalloys, combining a coated carbide grade with a chipbreaker geometry for reliable metal removal. Tiger·tec Silver coating for high wear resistance Rhombic 80° CCMT geometry for versatile turning FM4 chipbreaker for controlled chip formation 0.8 mm nose radius with 7° relief for stable cutting Longer tool life and process security for demanding materials The combination of the Tiger·tec Silver coating and the WSM30S carbide grade delivers increased resistance to abrasion and thermal load, which directly improves tool life in difficult machining tasks. This means fewer tool changes and more stable production cycles when working with materials that tend to work‑harden. The coated substrate supports a consistent cutting edge, reducing the risk of unexpected edge failure and providing measurable gains in process security. Consistent surface finish with targeted chip control With the FM4 chipbreaker and the rhombic 80° geometry, the insert produces short, controllable chips and helps maintain a steady surface quality on turned components. The geometry reduces vibration in many set‑ups, while the chipbreaker manages material evacuation in both stainless steels and superalloys, lowering the likelihood of built‑up edge and surface damage. Improved chip control contributes to repeatable part quality and less rework. Precision geometry designed for reliable turning performance The insert’s 0.8 mm nose radius and 7° relief balance strength and accuracy: the nose radius supports edge robustness for interrupted cuts and heavy passes, while the relief angle promotes secure clearance and reduced rubbing. The CCMT style allows indexed reuse of the cutting edges, making the component cost‑effective in batch production. Together, these features provide predictable behaviour in both roughing and semi‑finishing operations. Practical suitability and selection guidance for workshop use As a coated carbide indexable insert in the Tiger·tec Silver family, this grade is tailored to the thermal and mechanical demands of stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S). When selecting cutting parameters, prioritise moderate cutting speeds and rigid set‑ups for the best balance between life and surface integrity. If additional data or parameter support is needed, Metav Werkzeuge can provide application advice and matching toolholders. For specification support or to order Walter Tools Tiger·tec Silver inserts like the CCMT09T308-FM4 WSM30S, contact Metav Werkzeuge for tailored advice and quick delivery assistance. Technical Data Article number / SKU: CCMT09T308-FM4-WSM30S-WALTER Designation: CCMT09T308-FM4 WSM30S Series: Tiger·tec Silver Grade: WSM30S Manufacturer: Walter Tools Core Data Relief angle: 7° Nose radius: 0.8 mm Plate form: Rhombus 80° Plate size: 09 Plate thickness: T3 Tolerance class: M Special features Coating technology: Tiger·tec Silver Coated carbide cutting grade Chipbreaker: FM4 Suitable for stainless steels (ISO M) Suitable for heat‑resistant superalloys/titanium (ISO S) FAQ What materials is this insert suitable for? The CCMT09T308‑FM4 WSM30S insert from Walter Tools is suitable for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S). What are the key geometry details to note? The insert features a rhombic 80° geometry with a 0.8 mm nose radius and 7° relief, designed to balance edge strength and precision in turning operations. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker on the WSM30S grade promotes controlled, short chips and stable material evacuation, improving surface finish and reducing built‑up edge risk during turning. Can the insert be indexed to use multiple cutting edges? Yes; the CCMT format is an indexable turning insert allowing multiple edges to be used sequentially, supporting economical tool usage in batch production. Is this grade suitable for interrupted cuts? The combination of the WSM30S grade and a 0.8 mm nose radius gives enhanced edge robustness, making it suitable for applications that include interrupted cuts under appropriate conditions. Manufacturer: Walter Tools (Walter AG), Tübingen, Germany Protected trademarks and product names remain the property of their respective owners. The mentioned brand is stated for explanation purposes only; there is no affiliation between our company and the brand owners. The offered item is original and new.
CCMT09T308-FM6 WSM20S FM6 Wendeplatten - Walter Tools
Take advantage of the combination of robust edge stability, tailored chip control and a proven Tiger·tec Silver coating for consistent performance in demanding stainless and high-temperature alloy machining; order genuine Walter Tools inserts via Metav Werkzeuge or consult their technical team for application support. CCMT09T308-FM6 WSM20S — CCMT indexable insert with Tiger·tec Silver coating by Walter Tools The CCMT09T308-FM6 WSM20S is an indexable turning and drilling insert engineered for secure chip formation and high thermal resistance in machining stainless steels and heat-resistant superalloys. Tiger·tec Silver coating for extended tool life Suited for stainless steels and superalloys Rhombic 80° CCMT form, 0.8 mm corner radius FM6 chipbreaker for controlled chips Consistent edge life under elevated temperatures The combination of the WSM20S grade and Tiger·tec Silver coating delivers a balance of wear resistance and thermal stability suited to tough-to-machine materials. The coated carbide substrate supports a stable cutting edge, which reduces flank wear under the high temperatures generated when machining stainless steels and heat‑resistant alloys. This translates into longer tool life and fewer indexings per component, improving process reliability and lowering tooling-related interruptions. Geometry that supports precision and accessibility The rhombic 80° CCMT form and 0.8 mm corner radius provide a versatile balance between strength and finishing capability. The 7° relief angle reduces rubbing and heat buildup at the cutting edge, helping to maintain dimensional consistency and surface finish across variable depths of cut. For turning and limited drilling or bore‑enlargement operations, this geometry enables predictable cutting forces and steady tool behaviour, which benefits repeatable part quality in batch and single‑piece production. Controlled chip formation to keep production moving An optimised FM6 chipbreaker design focuses on producing secure, segmented chips in materials that otherwise tend to form long, stringy swarf. Reliable chip control reduces the risk of entanglement, limits rework, and shortens machine downtime caused by chip‑related stoppages. The result is a smoother workflow on the shop floor and improved operator safety, supporting higher effective machining rates and reduced secondary cleaning. Straightforward integration into conventional toolholders The insert’s CCMT geometry and standard designation ensure compatibility with a wide range of indexable turning and drilling holders. As a coated carbide insert in the Tiger·tec Silver family, it can be stocked alongside other grades for mixed‑material production; this simplifies logistics and eases tool changeovers. For further technical clarification or tailored recommendations on tooling setups, Metav Werkzeuge’s consultants are available to advise on holder selection and cutting strategies. Contact Metav Werkzeuge today for application-focused advice and to secure genuine Walter Tools Tiger·tec Silver inserts for reliable machining of stainless steels and superalloys. Technical data Article number: CCMT09T308-FM6-WSM20S-WALTER Designation: CCMT09T308-FM6 WSM20S Manufacturer: Walter Tools Series: Tiger·tec Silver Core data Corner radius: 0.8 mm Relief angle: 7° Plate size: 09 Plate thickness: T3 Plate form: Rhombus 80° Special features Chipbreaker: FM6 Grade: WSM20S (coated carbide) Material applicability: stainless steels (ISO group M), heat‑resistant superalloys/titanium (ISO group S) Suitable applications: turning, drilling and bore enlargement where specified geometry permits FAQ What materials is this insert designed for? The CCMT09T308-FM6 WSM20S insert is specified for stainless steels (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), benefitting from the Tiger·tec Silver coating and the WSM20S grade. How does the FM6 chipbreaker help in practice? The FM6 chipbreaker on the CCMT09T308-FM6 WSM20S generates secure, segmented chips, reducing the likelihood of long swarf and minimising machine interruptions during continuous turning or bore‑enlargement operations. Is the CCMT09T308-FM6 geometry compatible with standard toolholders? Yes, the CCMT form is a common indexable geometry and fits conventional turning and compatible drilling holders designed for CCMT inserts, simplifying retrofit and stock management. What surface finish can be expected with the 0.8 mm corner radius? A 0.8 mm corner radius offers a compromise between edge strength and finishing; it supports stable cutting for good surface integrity while maintaining sufficient robustness for moderate finishing passes. Does the Tiger·tec Silver coating improve process reliability? The Tiger·tec Silver coating enhances thermal stability and wear resistance, contributing to consistent edge life and predictable machining performance when processing stainless steels and superalloys. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT09T308-FM6 WSM30S FM6 Wendeplatten - Walter Tools
Combine high process security with the wear-resistant Tiger·tec Silver coating and precise geometry to ensure stable, productive machining of tough alloys and rostfreier Stahl; order the insert via Metav Werkzeuge or consult the technical advisors for application support. CCMT09T308-FM6 WSM30S Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte for rostfreier Stahl — Walter Tools, Tiger·tec Silver, 7° The CCMT09T308-FM6 WSM30S is an indexable insert engineered for drilling, boring and turning operations, optimised for rostfreie Stähle and heat‑resistant superalloys under demanding cutting conditions. Tiger·tec Silver coating for high edge life Optimised for rostfreier Stahl and superalloys Rhombus 80° form with 0.8 mm corner radius 7° relief angle for stable chip control Robust coating and grade for challenging materials The combination of the Tiger·tec Silver coating and the WSM30S grade provides a balance of heat resistance and edge stability that suits the machining of rostfreier Stahl and high‑temperature alloys. The coated cemented carbide construction supports secure chip formation and resists the adhesion and work‑hardening tendencies common with these materials. On a practical level, this means fewer interrupted cuts and longer intervals between insert changes, contributing to measurable improvements in uptime and process reliability. Geometry designed for repeatable surface and tool life The insert’s Rhombus 80° profile, together with a 0.8 mm corner radius and a 7° relief angle, delivers a geometry that maintains cutting edge integrity while providing favourable engagement angles for drilling and turning. The plate thickness code T3 and size 09 offer a compact yet stable platform that withstands radial and axial loads. These geometric choices translate into consistent cutting forces, improved surface finish and reduced risk of edge chipping when working with tougher alloys. Controlled chips and predictable performance Equipped with the FM6 chipbreaker, the insert is tuned to evacuate swarf efficiently across a range of feeds and depths of cut. The chip‑control system reduces the likelihood of built‑up edge and tangled chips, enhancing operator safety and machine cleanliness. In production terms, predictable chip formation allows for stable cycle times and fewer quality deviations, supporting higher overall productivity and lower scrap rates. Practical applications and machining advice This insert is intended for applications where material groups S (heat‑resistant superalloys, titanium) and M (rostfreie Stähle) are encountered. For mixed or unpredictable batches, the WSM30S grade provides a versatile option that minimises the need for frequent grade changes. As a coated indexable insert, it is compatible with common ISO toolholders for drilling and turning; selection of coolant strategy and cutting parameters should follow the material class and machine rigidity to fully exploit the insert’s wear resistance and chip‑forming features. Walter Tools’ quality standards support repeatable results in serial production. For robust, high‑temperature machining with proven chip control, request the Walter Tools CCMT09T308‑FM6 WSM30S inserts from Metav Werkzeuge or contact our technical team at info@metav-werkzeuge.com for tailored process recommendations Technical data SKU: CCMT09T308-FM6-WSM30S-WALTER Name: CCMT09T308-FM6 WSM30S Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM30S Chipbreaker: FM6 Base designation: CCMT09T308-FM6 Facts Relief angle: 7° Corner radius: 0.8 mm Plate form: Rhombus 80° Plate size: 09 Thickness code: T3 Tolerance class: M Special features Coating technology: Tiger·tec Silver Material groups: S / M Suitable for: rostfreier Stahl, heat‑resistant superalloys Typical applications: drilling, boring, turning Built for: stable chip formation and extended edge life FAQ What materials is this insert suitable for? The CCMT09T308‑FM6 WSM30S insert is designed primarily for rostfreier Stahl (ISO group M) and heat‑resistant superalloys (ISO group S), exploiting the Tiger·tec Silver coating to handle high temperatures and tough cutting conditions. Which chipbreaker does the insert use and what benefit does it provide? The insert features the FM6 chipbreaker, which promotes predictable chip segmentation and evacuation, reducing the risk of built‑up edge and improving machining stability. How does the insert geometry affect performance in turning operations? The Rhombus 80° form, 0.8 mm corner radius and 7° relief angle ensure a favourable cutting engagement that balances edge strength with surface finish, supporting repeatable results in both finishing and semi‑finishing passes. Is this insert compatible with standard toolholders for drilling and turning? Yes, the insert’s ISO designation and T3 thickness code match common toolholder families used for indexable drilling and turning; correct clamping and toolholder rigidity are essential to obtain the full benefit of the grade. Can the insert be used interchangeably for titanium and rostfreier Stahl? The WSM30S grade targets both ISO groups S and M, offering versatility across titanium and rostfreier Stahl applications, but cutting data should be adapted for each material to account for differing thermal and mechanical behaviours. Manufacturer: Walter AG; Walter Tools brand; headquarters in Tübingen. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only; there is no affiliation between Metav Werkzeuge and the mentioned manufacturers. The offered item is an original, brand‑new product from the manufacturer.
CCMT09T308-FP4 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the combination of precise surface finish, reliable chip control and robust geometry to maintain productive turning operations; order through Metav Werkzeuge or consult the sales team for application matching. CCMT09T308-FP4 WEP10C turning/boring indexable insert by Walter Tools — Cermet grade for fine finishing and controlled chips CCMT09T308-FP4 WEP10C is an indexable turning/boring insert designed for finishing operations where surface quality and predictable chip formation are essential Walter Cermet WEP10C cermet grade Rhombic 80° plate form 7° clearance angle for stable cutting FP4 chipbreaker for predictable chip control High-precision finishing for consistent results The WEP10C cermet grade and the fine edge geometry deliver consistent surface quality with reduced tendency for built-up edge during finishing passes. Cermet materials combine ceramic hardness with metallic toughness, which results in a cutting edge able to sustain high temperatures and preserve form over long runs. This makes the insert particularly suitable for applications where surface integrity is measured and repeatability is required. The Walter Cermet series focuses on predictable wear behaviour, enabling planners to estimate tool life more reliably and to schedule fewer unscheduled tool changes. Predictable chip control and process stability The integrated FP4 chipbreaker and the 7° clearance work together to generate short, controllable chips that evacuate reliably across a range of cutting parameters. Controlled chip formation reduces the risk of rework and protects both the workpiece and the machine, supporting higher process uptime. The rhombic geometry provides a stable cutting edge while allowing effective chip flow; this stability translates into repeatable part dimensions and fewer in-process interruptions. For users evaluating cycle efficiency, the predictable chip behaviour contributes directly to improved overall process economy. Versatile geometry for precise turning and boring tasks The Rhombic 80° plate form with a 0.8 mm corner radius and T3 thickness combines access to recessed areas with a balance between edge strength and fine finishing capability. The insert’s form factor supports a range of turning and light boring operations where dimensional control matters. Material suitability should be checked against the detailed product matrix, as the grade is catalogue-dependent; the technical data present a clear basis for selecting feeds and speeds. Using this insert in the correct holder and clamping arrangement ensures rigid support, which is essential for achieving the surface finishes and dimensional tolerances expected from a cermet cutting grade. For application advice or to request a matching tooling recommendation based on Walter Tools’ WEP10C, contact Metav Werkzeuge for direct consultation and ordering support Technical data Article number: CCMT09T308-FP4-WEP10C-WALTER Designation: CCMT09T308-FP4 WEP10C Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.8 mm Plate form: Rhombic 80° Plate size: 09 Thickness: T3 Tolerance class: M Special features Chipbreaker: FP4 Grade: WEP10C (cermet) Series: Walter Cermet Execution: T Material information: catalogue-dependent FAQ What materials is the CCMT09T308-FP4 WEP10C suited for? Material suitability depends on the detailed product matrix; the CCMT09T308-FP4 WEP10C insert by Walter Tools (SKU CCMT09T308-FP4-WEP10C-WALTER) is a cermet grade designed primarily for finishing—check the matrix for specific alloys. Can the insert be used for both turning and light boring? Yes, the rhombic 80° form and T3 thickness make the insert suitable for turning and light boring operations where accessibility and edge strength are required. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker produces short, controllable chips, improving chip evacuation and reducing the likelihood of entanglement, which supports stable, uninterrupted machining with the Walter Tools WEP10C grade. What does the designation CCMT09T308-FP4 indicate? The designation encodes geometry and features: CCMT indicates the rhombic insert family and chip geometry, 09 is the size, T3 the thickness, 0.8 the corner radius, and FP4 denotes the chipbreaker; WEP10C identifies the cermet grade. Is special clamping or holder recommended for optimal performance? Rigid clamping and the correct toolholder for rhombic 80° inserts are recommended to exploit the cermet grade’s surface-finish capability and to maintain dimensional repeatability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are used here for identification and explanatory purposes only. There is no affiliation between Metav Werkzeuge and the named manufacturers. The offered article is an original, factory-new product of the stated manufacturer.
CCMT09T308-FP4 WKP01G WKP01G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating, the WKP01G grade and the rhombic 80° geometry ensures durable cutting edges and reliable chip control for machining steel and cast iron; order the CCMT09T308-FP4 WKP01G directly via Metav Werkzeuge or consult our specialists for process optimisation. CCMT09T308-FP4 WKP01G – Rhombic 80° drilling/turning indexable insert, Tiger·tec Gold (Walter Tools) The CCMT09T308-FP4 WKP01G is a rhombic 80° indexable insert engineered for productive turning and drilling-related applications in steel and cast iron, offering a balanced combination of wear resistance and consistent chip formation. Tiger·tec Gold coating for high wear resistance WKP01G grade optimised for steel and cast iron Rhombic 80° geometry for versatile turning operations Precise 0.8 mm corner radius for repeatable edge life Increase throughput with a wear-resistant coating The combination of the Tiger·tec Gold coating and the WKP01G carbide grade delivers a measurable increase in tool life and process stability. The advanced coating reduces abrasive wear and protects the cutting edge during high-temperature contact with workpiece materials, which translates into longer intervals between index changes and fewer interruptions on the shop floor. For production environments that prioritise cycle time and repeatability, this insert offers a clear efficiency advantage by maintaining a stable cutting edge under the thermal and mechanical loads typical of steel and cast-iron machining. Consistent chip control and reliable surface finish Designed with a rhombic 80° form and the FP4 chipbreaker, this insert enables controlled chip formation across a wide range of feeds and depths of cut. The 0.8 mm corner radius and 7° clearance angle combine to reduce vibration and support a dependable cutting geometry, which helps obtain consistent surface quality and dimensional accuracy. For operators less familiar with chipbreaker technology: the FP4 pattern actively segments chips and directs them away from the cutting zone, lowering the risk of built-up edge and improving overall machining safety. Broad material suitability and economical operation Rated for the ISO groups P and K, the insert is suitable for unalloyed and alloyed steel as well as cast iron, making it a versatile choice for mixed production jobs and job-shop environments. The standard T3 thickness and size 09 format ensure compatibility with common toolholders, simplifying tool management and reducing inventory complexity. By offering a stable edge life and simplified tool handling, this insert contributes to lower unit costs and predictable production output, supporting lean manufacturing objectives and easier planning for maintenance cycles. For tailored recommendations or to place an order for the CCMT09T308-FP4 WKP01G, contact Metav Werkzeuge for application support and fast supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: CCMT09T308-FP4-WKP01G-WALTER Designation: CCMT09T308-FP4 WKP01G Base designation: CCMT09T308-FP4 Numbers / core technical data Clearance angle: 7° Corner radius: 0.8 mm Thickness: T3 Insert size: 09 Tolerance class: M Versions / special features Coating: Tiger·tec Gold Grade: WKP01G Chipbreaker: FP4 Geometry: Rhombus 80° Applicable materials: Steel (P), Cast iron (K) Product type: Drilling/boring and turning indexable insert FAQ What materials is this insert suitable for? The CCMT09T308-FP4 WKP01G is specified for machining steel (ISO group P) and cast iron (ISO group K), reflecting the grade and coating combination optimised for those materials. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on this Walter Tools insert enhances wear resistance and heat protection, which prolongs edge life and increases process stability in continuous turning operations. What is the function of the FP4 chipbreaker? The FP4 chipbreaker controls chip shape and evacuation, promoting safe chip segmentation and improved surface quality during turning and drilling-related tasks. Is the insert compatible with standard toolholders? Yes; the insert uses a common 09 size and T3 thickness, making it compatible with a wide range of standard toolholders for rhombic 80° inserts. How does the 0.8 mm corner radius affect cutting performance? The 0.8 mm radius offers a balance between robust edge strength and the ability to achieve consistent workpiece surface finish, helping to reduce vibration and extend edge life under moderate cutting forces. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT09T308-FP4 WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the FP4 chipbreaker and a rhombic 80° geometry to achieve stable chip control and extended tool life in steel turning; order directly via Metav Werkzeuge or consult our technical team for application support. CCMT09T308-FP4 WPP10G – Turning insert, Tiger‑tec Gold, for steel | Walter Tools The CCMT09T308-FP4 WPP10G is a coated turning insert designed for reliable steel machining, featuring a rhombic 80° shape and a robust chipbreaker for consistent metal removal. Tiger‑tec Gold coated carbide Optimised for steel machining Rhombic 80° geometry for stability Corner radius 0.8 mm, 7° clearance Boosted process reliability with advanced coating and chip control The combination of Tiger‑tec Gold and coated carbide technology delivers notably improved wear resistance and thermal protection during heavy-duty turning of steel. The FP4 chipbreaker supports controlled chip formation, reducing interruptions and tool‑change frequency; this converts directly into fewer downtimes and more predictable batch throughput. The chemistry and layering of the grade are tuned for the heat and chip characteristics typical of ISO P materials, helping to maintain cutting edge integrity under continuous operation. Geometry that enhances stability and surface quality A rhombic 80° geometry provides a stable cutting orientation and improved support for the cutting edge, which benefits both roughing and medium finishing passes. The corner radius 0.8 mm increases edge robustness for interrupted cuts, while the 7° clearance helps to avoid flank rubbing and heat build‑up. These geometric choices combine to give a balance between tool life and achievable surface finish, making the insert suitable for a range of turning strategies where consistent part quality is required. Predictable performance and broad steel coverage The WPP10G grade in the Tiger‑tec Gold series is crafted for broad applicability across unalloyed and alloyed steels, offering a mix of wear resistance and toughness that supports repeatable results. The CCMT09T308-FP4 WPP10G insert is designed to deliver consistent tool life and stable chip control, which simplifies process parameter selection and shortens setup times. For shops aiming to raise productivity while keeping machining parameters reliable, this insert delivers a convincing balance of economy and performance. For machining recommendations or availability of the Walter Tools CCMT09T308-FP4 WPP10G, contact Metav Werkzeuge for tailored advice and fast delivery: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: CCMT09T308-FP4-WPP10G-WALTER Designation: CCMT09T308-FP4 ISO designation: CCMT09T308-FP4 WPP10G Grade: WPP10G Series: Tiger‑tec Gold Manufacturer: Walter Tools Core specifications Geometry: Rhombus 80° Corner radius: 0.8 mm Clearance angle: 7° Insert size: 09 Thickness: T3 Tolerance class: M Chipbreaker: FP4 Materials & features Coating: Tiger‑tec Gold (coated carbide) Suitable for: steel (ISO P) Execution: T Plate form: CCMT (rhombic) Engineered for stable chip formation and reliable wear behaviour FAQ Which materials is this insert suitable for? The CCMT09T308-FP4 WPP10G is formulated for machining steel (ISO P), including unalloyed and alloyed grades commonly encountered in general turning. How does the Tiger‑tec Gold coating benefit machining? The Tiger‑tec Gold coating on the WPP10G grade improves thermal resistance and reduces abrasive wear on the cutting edge, which helps the insert maintain performance during prolonged turning cycles. What is the role of the FP4 chipbreaker? The FP4 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of chip entanglement and supporting uninterrupted production when using the CCMT09T308-FP4 WPP10G. Is this insert suitable for interrupted cuts or heavy depths of cut? With a corner radius 0.8 mm and rhombic 80° geometry, the insert provides a robust cutting edge that tolerates intermittent engagement and offers improved stability under heavier loads. Can the CCMT09T308-FP4 WPP10G be used for finishing operations? Yes; by selecting appropriate feeds and speeds the insert can achieve good surface quality, thanks to the combined benefits of rhombic geometry and the Tiger‑tec Gold coating. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is an original, brand‑new product of the manufacturer Walter Tools.
CCMT09T308-FP4 WPP20G Tiger-tec Gold Wendeplatten - Walter Tools
Take advantage of a coated‑carbide grade engineered for steel to increase uptime and cutting stability; the WPP20G composition with Tiger‑tec Gold technology delivers long tool life, while the FP4 chipbreaker and Rhombic 80° geometry secure predictable chip formation and consistent surface quality. Order the insert directly via Metav Werkzeuge or consult our technical team for process integration. CCMT09T308-FP4 WPP20G – Turning and boring indexable insert, Tiger‑tec Gold, Walter Tools A versatile indexable insert, CCMT09T308-FP4 WPP20G is a rhombic 80° turning and boring plate optimised for machining steel under ISO P conditions. Tiger‑tec Gold coating for extended tool life Engineered for ISO P (steel) machining FP4 chipbreaker for stable chip control Rhombic 80° form with 7° clearance angle Proven performance for steel turning The combination of the WPP20G grade and Tiger‑tec Gold coating provides a balanced wear resistance and toughness that is particularly effective when machining a wide range of steels. As a coated carbide insert designed for ISO P applications, it reduces the risk of thermal wear and flank wear in continuous and interrupted cuts, which supports higher productivity and fewer tool changes. The robust grade selection affords a reliable service life while preserving dimensional accuracy during extended production runs. Consistent chip control and surface quality The FP4 chipbreaker is engineered to produce predictable chip shapes during both roughing and finishing, reducing the likelihood of built‑up edge and improving chip evacuation in bore and turning operations. With a 0.8 mm corner radius and a 7° clearance angle, the insert helps secure a stable cutting engagement and enhanced surface finish on machined components. These geometric features translate into more consistent part quality and reduced rework rates in serial production. Robust geometry for process reliability The Rhombic 80° geometry and size 09 format provide a favourable compromise between cutting strength and accessibility in shoulder and profiling operations. The T3 thickness and tolerance class M ensure dimensional repeatability when indexing inserts and mounting in standard toolholders, supporting reproducible set‑ups across multiple machines. This stability helps to maintain cycle times and lower overall machining costs by limiting unexpected tool failures. Practical integration and application scope Rated primarily for steel (ISO P), this insert suits a broad mix of operations where a universal performance grade is required. The CCMT09T308-FP4 WPP20G insert integrates into common turning and boring toolholders in industrial workshops and is particularly effective where stable chip control and predictable wear behaviour are priorities. If additional process data or application‑specific recommendations are needed, technical consultation is available to match cutting parameters and clamping solutions to the machining task. Contact Metav Werkzeuge for tailored cutting data, availability and advice on integrating the CCMT09T308-FP4 WPP20G insert into production processes Technical Data Article number: CCMT09T308-FP4-WPP20G-WALTER Designation: CCMT09T308-FP4 ISO designation: CCMT09T308-FP4 WPP20G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP20G Chipbreaker: FP4 Shape: Rhombic 80° Size: 09 Thickness: T3 Corner radius: 0.8 mm Clearance angle: 7° Tolerance class: M Execution: T Material group: P (steel) Facts Corner radius: 0.8 mm Clearance angle: 7° Size indicator: 09 Thickness code: T3 Tolerance: M Special features Coated carbide grade WPP20G Tiger‑tec Gold coating technology FP4 chipbreaker for predictable chips Geometry: Rhombic 80° Suitable for ISO P (steel) FAQ What materials is this insert intended for? The CCMT09T308-FP4 WPP20G insert is specified for ISO P applications and is designed primarily for machining steel. How does the Tiger‑tec Gold technology benefit production? The Tiger‑tec Gold coating on the WPP20G grade improves wear resistance and heat management, extending tool life and enabling more consistent results during prolonged turning or boring operations. Is the FP4 chipbreaker suitable for both roughing and finishing? The FP4 chipbreaker offers controlled chip formation that performs well across a range of feeds, supporting both robust roughing cuts and finer finishing passes when process parameters are adjusted accordingly. What does the 0.8 mm corner radius affect on the component surface? A 0.8 mm corner radius contributes to improved surface integrity and edge strength; it helps reduce cutting forces spikes and supports better surface finish compared with very small radii. Can this insert be indexed in standard CCMT toolholders? Yes, the CCMT09T308-FP4 format matches standard CCMT toolholders; the specified tolerance class M and T3 thickness ensure consistent fit and repeatability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product from Walter Tools.
CCMT09T308-FP6 WPP10G FP6 Wendeplatten - Walter Tools
The high-wear Tiger·tec Gold grade and the optimised FP6 chipbreaker deliver reliable productivity and consistent surface finish; order directly via Metav Werkzeuge or consult our specialists for application advice. CCMT09T308-FP6 WPP10G — Turning insert, Tiger·tec Gold grade, Walter Tools A CCMT09T308-FP6 WPP10G indexable turning insert for steel machining, engineered for stable chip formation and long tool life Tiger·tec Gold coating for long tool life Optimised FP6 chipbreaker for stable chips 80° rhombic shape, 0.8 mm nose radius High-performance grade for steel turning and durability The WPP10G grade, part of the Tiger·tec Gold series, is a coated carbide designed specifically for ISO P (steel) applications. Its coating technology improves thermal stability and reduces flank wear, which translates into longer intervals between tool changes and predictable tool life in both roughing and finishing operations. As a result, process stability is enhanced and production throughput can increase without compromising surface integrity. The technical design focuses on managing the heat and chip formation typical of steel machining, making this insert a reliable option for general to demanding turning tasks. Geometry and chip control for consistent machining performance The 80° rhombic contour combined with a 7° clearance angle and an FP6 chipbreaker yields controlled chip formation and effective evacuation across a range of cutting parameters. The 0.8 mm nose radius supports good surface finish while still allowing robust cutting conditions where required. These geometric choices reduce the likelihood of built-up edge and improve surface consistency, especially on interrupted cuts or variable feed rates. The medium tolerance class M ensures interchangeability and repeatable mounting accuracy in standard toolholders, supporting efficient toolset management on the shop floor. Applications, handling and process guidance for reliable results This insert is intended primarily for machining steel (ISO P) and covers a broad span from wear-resistant to tougher steel grades. The plate thickness T3 and size 09 make it suitable for common toolholder families used in turning and light boring operations. When integrated into a stable holder and paired with appropriate cutting parameters, this indexable solution promotes reduced downtime and easier tool changeover routines. For first-time setups, start with conservative cutting values and monitor wear progression to dial in optimised feeds and speeds for each batch, benefiting from the grade’s balanced toughness and wear resistance. For high-productivity steel turning with proven Tiger·tec Gold performance, contact Metav Werkzeuge for application recommendations and stock information Technical data Article number: CCMT09T308-FP6-WPP10G-WALTER SKU: CCMT09T308-FP6-WPP10G-WALTER Designation: CCMT09T308-FP6 WPP10G Facts Clearance angle: 7° Corner radius: 0.8 mm Plate size: 09 Thickness: T3 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: FP6 Shape: Rhombic 80° Application group: ISO P (steel) Execution: T Manufacturer brand: Walter Tools FAQ What materials is this insert designed for? The CCMT09T308-FP6 WPP10G insert is formulated for ISO P materials, primarily steel, and is optimised for the typical heat and chip formation encountered when turning steel. How does the FP6 chipbreaker affect machining? The FP6 chipbreaker on this Walter Tools turning insert promotes short, controllable chips and reliable evacuation, improving process stability and surface finish during steel turning. Can this insert be used for finishing as well as roughing? Yes, the combination of the 0.8 mm nose radius and the Tiger·tec Gold grade on this turning insert supports both finishing and more aggressive cuts, depending on chosen cutting parameters. What does tolerance class M mean for toolholders? Tolerance class M indicates a medium manufacturing tolerance, ensuring good repeatability and interchangeability in standard indexable insert toolholders when using this Walter Tools insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanatory purposes only and indicate no affiliation between our company and the named brands. The offered item is an original, factory-new product of Walter Tools.
CCMT09T308-FP6 WPP20G WPP20G Wendeplatten - Walter Tools
Maximise turning performance with the Tiger·tec Gold WPP20G grade and the FP6 chipbreaker: precise chip control and extended tool life support efficient, repeatable steel machining — order directly via Metav Werkzeuge or consult the technical team for application advice. CCMT09T308-FP6 WPP20G — Turning insert, Tiger·tec Gold, FP6, Walter Tools CCMT09T308-FP6 WPP20G is a rhombic 80° indexable turning insert formulated for steel machining, combining a Tiger·tec Gold coating with a FP6 chipbreaker to deliver controlled chip formation and consistent surface finish. Tiger·tec Gold coated carbide grade WPP20G Geometry FP6 chipbreaker for stable chips Rhombic 80° shape, 0.8 mm corner radius Designed for steel (ISO P), free angle 7° Stable performance from a coated grade The WPP20G grade, part of the Tiger·tec Gold series, is a coated carbide solution optimised for the thermal and mechanical demands of turning steel (ISO P). Its coating technology improves wear resistance and reduces flank wear under typical steel cutting temperatures, which contributes to a longer tool life and fewer insert changes. For production environments that prioritise throughput and repeatability, the combination of this grade with a stable substrate ensures a measurable reduction in downtime and predictable replacement cycles. Precision geometry that controls chips and finish A well‑defined chipformer and rake geometry make the difference between frequent interruptions and uninterrupted cutting. The FP6 chipbreaker is engineered for consistent chip segmentation in common steel grades, reducing the risk of entangling long chips and improving process stability. The 0.8 mm corner radius and rhombic 80° shape support accurate profile reproduction and contribute to a superior surface finish on turned components, particularly where dimensional consistency is required across batches. Practical gains for machining productivity Using this insert family can lead to tangible production benefits: reduced cycle variability, stable cutting forces and improved edge life. The moderate 7° free angle supports finishing to medium depths of cut while maintaining edge strength, so operators experience a balance between cutting security and achievable surface quality. Explained plainly, the insert’s features translate into fewer interruptions for tool change, more consistent part quality and a better cost‑per‑component figure in serial turning operations. Handling and application guidance for the workshop The insert is supplied in the CCMT format and a T‑type execution, making it compatible with standard turning toolholders designed for rhombic 80° inserts. The series: Tiger·tec Gold and grade: WPP20G indicate suitability for a broad range of steel machining tasks, with reliable chip control in mixed material batches. For workshop planning, the insert’s designation and geometry simplify tool selection and inventory management, since the coding corresponds to widely used ISO insert standards and toolholder interfaces. For demanding steel turning applications, consider Walter Tools’ Tiger·tec Gold WPP20G inserts via Metav Werkzeuge for consistent chip control and extended edge life — contact Metav Werkzeuge for application-specific advice and supply options: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: CCMT09T308-FP6-WPP20G-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCMT09T308-FP6 WPP20G Walter Tools ISO designation: CCMT09T308-FP6 WPP20G Core specifications Corner radius: 0.8 mm Free angle: 7° Plate size: 09 Plate thickness: T3 Tolerance class: M Materials & features Grade: WPP20G Series: Tiger·tec Gold Chipbreaker: FP6 Shape: Rhombus 80° Execution: T Intended application: Steel (ISO P) FAQ What material range is this insert intended for? This insert is specified for steel machining (ISO P) and the WPP20G grade of the Tiger·tec Gold series is tuned for the thermal and chip‑forming behaviour typical of unalloyed and alloyed steels. How does the FP6 chipbreaker affect machining? The FP6 chipbreaker promotes regular chip segmentation and stable evacuation when cutting steel, improving process reliability and reducing the likelihood of chip interference in turning operations. Which toolholders are compatible with this insert format? The CCMT form factor and rhombic 80° geometry are compatible with standard turning holders designed for 80° rhombic inserts; holders accepting CCMT‑type inserts will suit this product. Does the 0.8 mm corner radius suit finishing operations? A 0.8 mm corner radius provides a compromise between edge strength and surface finish, making it suitable for finishing and light semi‑finishing passes where dimensional control and surface integrity matter. Is this an original Walter Tools product? The article is an original factory‑new product from Walter Tools, presented under the manufacturer’s specified grade and series. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CCMT09T308-FW4 WKP01G WKP01G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, the FW4 chipbreaker for reliable chip control and compatibility with steel and cast iron to maintain productive turning cycles; order via Metav Werkzeuge or consult the specialists for application advice. CCMT09T308-FW4 WKP01G indexable turning insert – Rhombic 80°, 0.8 mm nose radius | Walter Tools The CCMT09T308-FW4 WKP01G is an indexable turning insert crafted for general turning operations on steel and cast iron, offering a balance of wear resistance and consistent chip control. Tiger·tec Gold coating for enhanced wear resistance Coated carbide grade WKP01G for steel and cast iron Rhombic 80° form with 0.8 mm nose radius FW4 chipbreaker for stable chip control High productivity through coated-grade performance The combination of the WKP01G coated carbide grade and the Tiger·tec Gold coating is engineered to extend tool life under typical turning loads. This insert reduces unplanned tool changes by improving edge stability and abrasion resistance during continuous operation on steel and cast iron, which means fewer stoppages and a steadier production output. The result is measurable efficiency: longer tool life and more predictable change intervals contribute to a lower effective cost per part without sacrificing surface quality. Reliable chip control and geometry that aids process stability The FW4 chipbreaker is designed to form controllable chips in a wide range of turning passes, lowering the risk of entanglement in both roughing and light finishing cuts. The Rhombic 80° geometry, combined with a 0.8 mm nose radius, provides a favourable balance between cutting edge strength and surface finish capability. Together, these features support stable cutting forces and consistent part tolerances, particularly in serial production contexts where repeatability is essential. Practical application guidance and machining scope This insert is specified for materials classified under ISO groups P (steel) and K (cast iron), making it suitable for unalloyed and alloyed steels as well as abrasive cast materials where controlled chip breakage is needed. The 7° relief angle supports positive cutting engagement, while the tolerance class M ensures consistent dimensional quality across batches. For best results, pair the insert with suitable holder geometry and set cutting parameters according to workpiece machinability; specialist advice is available from Metav Werkzeuge for optimising parameters for specific machines and workpiece materials. For tailored machining recommendations for this Walter Tools insert or to confirm stock availability, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930—our team will advise on the ideal grade and cutting data for the intended application. Technical data Article number: CCMT09T308-FW4-WKP01G-WALTER Designation: CCMT09T308-FW4 WKP01G Type: Indexable turning insert Series: Tiger·tec Gold Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Relief angle: 7° Insert form: Rhombic 80° Insert size: 09 Thickness: T3 Tolerance class: M Special features Grade WKP01G – coated carbide Chipbreaker: FW4 Material suitability: Steel (P) and Cast iron (K) Coating: Tiger·tec Gold FAQ Which materials can be machined with this insert? The CCMT09T308-FW4 WKP01G is specified for ISO groups P and K, meaning it is suitable for a range of steel grades and cast iron applications. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WKP01G grade improves wear resistance and edge life, contributing to longer service intervals and more stable machining on abrasive materials. Is the FW4 chipbreaker suitable for finishing passes? The FW4 chipbreaker offers stable chip formation across roughing and light finishing; for high-finishing demands, verify required surface finish and adjust feed and depth of cut accordingly. Does this insert suit stainless steel machining? Stainless steel is not listed among the specified ISO material groups for this grade; the CCMT09T308-FW4 WKP01G is optimised for steel and cast iron, so alternative grades should be considered for sustained stainless steel machining. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation purposes only. There is no affiliation between our company and the named brands. The offered item is an original, brand-new product from the manufacturer.
CCMT09T308-FW4 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WPP10G grade and a precise 7° clearance angle for consistent, efficient steel turning; reliable chip control and a 0.8 mm corner radius support high process stability. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT09T308-FW4 WPP10G – Turning insert for steel (Rhombic 80°) by Walter Tools A coated CCMT09T308-FW4 WPP10G turning insert engineered for stable medium-duty steel machining, offering consistent wear behaviour and dependable surface quality in production environments Tiger·tec Gold coating for long life Optimised for steel (ISO P) chipforming Rhombic 80° geometry, 0.8 mm corner radius 7° clearance angle for secure cutting Consistent cutting performance for production machining The insert delivers a balance of productivity and predictability: the combination of a coated carbide grade and a defined cutting geometry provides stable cutting forces and repeatable component quality. For series production or frequent tool changes, the consistency of the cutting edge reduces process variations and downtime. The rhombic geometry supports turning operations where access and clearance are critical, while the nominal corner radius improves tool life without compromising dimensional control. Coating and grade that extend tool life under heat The Tiger·tec Gold technology and WPP10G grade create a wear‑resistant surface with good heat resistance and adhesion, which translates into longer intervals between insert changes. The coated hardmetal construction reduces crater wear and supports higher cutting parameters compared with uncoated grades, enabling improved economy on steel workpieces. Explained simply: the coating acts as a thermal and chemical shield, slowing wear mechanisms and maintaining a sharper cutting edge for longer. Controlled chips and secure cutting geometry Chip control is essential for safe machining and consistent finishes; the FW4 chipbreaker is designed to produce predictable chip shapes when machining steel (ISO P), minimising entanglement and supporting automated workflows. The Rhombic 80° outline and 0.8 mm corner radius contribute to an even contact pattern and reliable edge strength, while the 7° clearance angle reduces rubbing and heat build‑up at the flank. Together these features improve surface finish and reduce the risk of built‑up edge. Practical application guidance for workshop and production This insert is tailored to steel turning tasks where a mix of wear resistance and toughness is required. With a nominal thickness of T3 and tolerance class M, it suits standard toolholders that accept ISO indexable inserts in the CCMT size family. The grade supports typical steel machining heat and chip formation patterns; for best results pair the insert with stable toolholding and adapt cutting data to part rigidity and machine capability. For specialists and general workshop users alike, the result is a dependable insert for everyday production. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts and to discuss availability or technical matching to specific turning operations Technical Data SKU: CCMT09T308-FW4-WPP10G-WALTER Article designation: CCMT09T308-FW4 Full designation: CCMT09T308-FW4 WPP10G Manufacturer: Walter Tools Dimensions & key figures Clearance angle: 7° Corner radius: 0.8 mm Insert size: 09 Plate thickness: T3 Tolerance class: M Design & features Coating: Tiger·tec Gold Grade: WPP10G Shape: Rhombic 80° Chipbreaker: FW4 Application group: Steel (ISO P) Series: Tiger‑tec Gold FAQ What materials is this insert suitable for? The CCMT09T308-FW4 WPP10G insert from Walter Tools is specified for steel machining (ISO P) and is formulated to handle the typical heat and chip formation of unalloyed and alloyed steels. How does the Tiger·tec Gold coating help in production? The Tiger·tec Gold coating on the WPP10G grade improves wear resistance and thermal stability, which in turn extends tool life and supports higher cutting parameters in continuous production runs. What is the purpose of the FW4 chipbreaker? The FW4 chipbreaker is engineered to produce consistent, manageable chips when machining steel, reducing entanglement and improving process reliability with automatic and manual chip evacuation. Which insert dimensions and tolerance class apply to this product? The insert is a CCMT09T308 geometry with a 0.8 mm corner radius, thickness T3 and tolerance class M; the SKU is CCMT09T308-FW4-WPP10G-WALTER. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners and are mentioned solely for explanation. There is no connection between our company and the mentioned brands. The offered item is original, brand‑new goods from the manufacturer.
CCMT09T308-FW4 WPP20G FW4 Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the FW4 chipbreaker for consistent chip control and extended tool life; the rhombic 80° geometry with a 0.8 mm corner radius ensures robust edge strength for demanding steel machining. Order the insert directly via Metav Werkzeuge or consult the technical team for cutting data and toolholder compatibility. CCMT09T308-FW4 WPP20G indexable turning insert, Tiger‑tec Gold, for steel – Walter Tools The CCMT09T308-FW4 WPP20G is an indexable turning insert for steel machining, featuring a Tiger‑tec Gold coated carbide grade and a rhombic 80° geometry for reliable, productive cutting. Turning insert »CCMT09T308-FW4 WPP20G« by Walter Tools Tiger‑tec Gold coated for high process security Rhombic 80° geometry with 0.8 mm radius Optimised FW4 chipbreaker for steel applications Extended tool life through advanced coating technology The coated carbide grade WPP20G, part of the Tiger‑tec Gold series, delivers improved resistance to flank and crater wear under the thermal and mechanical loads typical of machining steels. The result is a longer service life of the cutting edge and fewer insert changes, which contributes directly to higher productivity and lower tooling costs per component. The coating also supports stable cutting at elevated speeds, offering a reliable balance between wear resistance and toughness for general steel applications. Predictable chip control and stable cutting for better productivity The FW4 chipbreaker, combined with the rhombic 80° format and a 7° relief angle, provides controlled chip formation and evacuation when machining ISO P materials. This geometry reduces chatter and vibration while promoting a consistent surface finish, particularly during medium-depth turning. With a 0.8 mm corner radius, the insert offers enhanced edge strength for intermittent cuts and shoulder work, improving process stability in roughing and finishing operations. Easy integration into machining processes and consistent quality Designed to fit standard CCMT toolholders, the insert’s T3 thickness and tolerance class M ensure reliable seating and repeatable performance in production setups. The grade is optimised for a broad range of steels under ISO P, making it a universal choice for batch production and job-shop environments where material mix and flexibility matter. For tailored cutting parameters and to maximise component quality, technical consultation is available via Metav Werkzeuge. Consult Metav Werkzeuge for tailored cutting data and quick supply of Walter Tools Tiger‑tec Gold inserts to match specific machining requirements Technical data Article number: CCMT09T308-FW4-WPP20G-WALTER Label: Drehwendeschneidplatte CCMT09T308-FW4 WPP20G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte / indexable turning insert Grade: WPP20G Series: Tiger‑tec Gold Facts Free angle: 7° Corner radius: 0.8 mm Plate shape: Rhombus 80° Size: 09 Thickness: T3 Tolerance class: M Material code: P Special features Coating: Tiger‑tec Gold Chipbreaker: FW4 Coated carbide grade: WPP20G Suitable for: Steel (ISO P) Base geometry: CCMT09T308-FW4 FAQ What materials is this insert suitable for? The CCMT09T308-FW4 WPP20G insert by Walter Tools is designed primarily for machining steels in the ISO P group. How does the Tiger‑tec Gold coating affect performance? The Tiger‑tec Gold coating on the WPP20G grade increases wear resistance and enables stable cutting performance at higher speeds, improving insert life and process reliability. Which chipbreaker is fitted and what benefit does it provide? The insert features the FW4 chipbreaker, which promotes controlled chip formation and evacuation during turning of steel, reducing the risk of built-up edge and improving surface finish. Is this insert compatible with standard CCMT toolholders? Yes, the CCMT09T308-FW4 geometry and T3 thickness are compatible with standard CCMT toolholders, ensuring straightforward integration into existing tool systems. Trademarks and trade names are the property of their respective owners. Brand names are used for explanatory purposes only; there is no connection between our company and the named brands. The offered item is original, factory‑new merchandise from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
CCMT09T308-FW4 WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance and stable chip control for consistent productivity in demanding turning operations; the WSM10S coating and FW4 chipbreaker deliver reproducible cutting results and extended edge life. Order the insert directly via Metav Werkzeuge or consult our technical team for application support. CCMT09T308-FW4 WSM10S — Indexable turning insert, Rhombic 80°, for stainless steels and superalloys — Walter Tools The CCMT09T308-FW4 WSM10S is a rhombic indexable turning insert engineered for heavy-duty applications, optimised to machine stainless steels and heat‑resistant superalloys with reliable chip control. Tiger·tec Silver coating technology Suitable for stainless steels and superalloys Rhombic 80° form with 7° relief 0.8 mm corner radius, FW4 chipbreaker Consistent cutting performance in demanding materials The combination of Tiger·tec Silver and a coated carbide substrate provides the thermal and mechanical stability required when processing stainless steels and superalloys. The series and grade selection reduces the risk of built‑up edge and supports a stable cutting edge, which in turn improves surface finish and reduces unexpected downtime. Thanks to the specified relief angle and geometry, the insert maintains repeatable behaviour across batches, making process planning more predictable. Strengthened edge geometry for longer tool life A 0.8 mm corner radius increases the load capacity of the cutting edge, while the T3 thickness contributes to overall rigidity during interrupted or heavy cuts. Combined with the FW4 chipbreaker, this geometry balances edge strength and chip formation, resulting in predictable tool life and fewer insert changes. The outcome is a lower number of tool interventions and more stable cycle times on serial turning operations. Precise chip control and reliable machining The Rhombic 80° shape and FW4 chipbreaker enable consistent chip segmentation and evacuation when working with materials that tend to produce stringy or adhesive chips. That controlled chip behaviour reduces the risk of entanglement and supports safer, cleaner machining. For production environments where reproducibility matters, the insert’s design supports steady process security and contributes to overall productivity improvements. Easy selection and integration into existing setups The ISO designation and tolerance class M make the insert straightforward to specify for common toolholder systems that accept CCMT‑style inserts. With clearly defined geometry and coating characteristics, the grade simplifies tooling decisions for engineers and buyers seeking a versatile solution for tough alloys. The combination of series characteristics and chipformer design also eases interchangeability across a range of turning applications. For machining stainless steels and superalloys with improved reliability, order the Walter Tools CCMT09T308-FW4 WSM10S insert via Metav Werkzeuge or contact our consultants for tailored cutting data and process recommendations. Technical data Article number: CCMT09T308-FW4-WSM10S-WALTER Product type: Indexable turning insert Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.8 mm Insert size: 09 Plate thickness: T3 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WSM10S Chipbreaker: FW4 Plate form: Rhombus 80° Material suitability: S / M (superalloys, stainless steels) FAQ Which materials can be machined with this insert? The CCMT09T308-FW4 WSM10S insert is intended for stainless steels (M) and heat‑resistant superalloys (S), offering thermal stability and controlled chip formation for these groups. How does the FW4 chipbreaker affect machining? The FW4 chipbreaker promotes consistent chip segmentation and evacuation, reducing entanglement and improving safety and process reliability during turning of sticky or ductile materials. What is the advantage of the 0.8 mm corner radius? A 0.8 mm corner radius increases edge strength and resistance to chipping, which supports longer insert life and more stable cutting conditions in heavy or interrupted cuts. Is this insert compatible with standard CCMT toolholders? Yes, the ISO designation CCMT09T308‑FW4 aligns with common CCMT toolholder interfaces, facilitating straightforward integration into existing setups. What does the Tiger·tec Silver series provide? The Tiger·tec Silver series delivers a coated carbide solution optimised for thermal resistance and edge stability, particularly beneficial when machining demanding materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CCMT09T308-FW4 WSM20S FW4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver heat resistance and a proven FW4 chipbreaker for steady chip control and reliable edge life; order the insert directly via Metav Werkzeuge or consult the team for cutting data and availability. CCMT09T308-FW4 WSM20S indexable turning insert — Tiger‑tec Silver, 0.8 mm corner radius (Walter Tools) The CCMT09T308-FW4 WSM20S is an indexable turning insert designed for medium to heavy-duty machining of stainless steels and heat‑resistant alloys, offering a robust balance of edge stability and thermal resistance for demanding turning tasks Tiger‑tec Silver coated grade for heat resistance Suited to stainless steels and superalloys Rhombic 80° shape for versatile turning 0.8 mm corner radius for balanced strength High productivity when machining stainless and heat‑resistant alloys The combination of the WSM20S coated carbide grade and the Tiger‑tec Silver coating addresses common challenges in machining stainless steels and superalloys: poor thermal conductivity and a tendency to form built‑up edge. As a result, the insert promotes stable chip formation and reduces unexpected edge failure, allowing a higher and more consistent metal removal rate. The specific FW4 chipbreaker helps to break and evacuate chips reliably, which is particularly relevant when processing long or stringy chips common in these materials. Predictable tool life and process security for production environments Built with a tolerance class of M and a clearance angle of 7°, this indexable insert offers predictable cutting behaviour that supports reproducible cycle times. The moderate 0.8 mm corner radius provides a compromise between edge strength and surface finish, extending time between indexings while maintaining acceptable component quality. For workshops focused on throughput and repeatability, the grade’s thermal robustness translates into fewer tool changes and more consistent batch results, which contributes directly to cost efficiency and reduced downtime. Geometry and handling tailored to versatile turning applications The rhombic 80° geometry and insert size 09 deliver versatility across external and light profiling operations; the geometry enables stable positioning in common toolholders and good access to varied turning contours. The T3 plate thickness supports secure clamping and edge support during interrupted cuts. For teams evaluating tooling options, the insert’s combination of coated carbide, chipbreaker form and geometry simplifies tooling decisions and shortens setup time while preserving quality of finish. Contact Metav Werkzeuge for tailored cutting data, batch availability and application advice on Walter Tools Tiger‑tec Silver inserts Technical Data SKU: CCMT09T308-FW4-WSM20S-WALTER Designation: CCMT09T308-FW4 WSM20S Series: Tiger‑tec Silver Manufacturer: Walter Tools Type: Indexable turning insert Core data Clearance angle: 7° Corner radius: 0.8 mm Insert size: 09 Thickness: T3 Geometry: Rhombic 80° Tolerance class: M Features Coating/grade: WSM20S (Tiger‑tec Silver coated carbide) Chipbreaker: FW4 Material applicability: Stainless steel (M), Superalloys/Titanium (S) Plate form: Rhombus 80° Series characteristics: thermal resistance, stable edge performance FAQ What materials is the CCMT09T308-FW4 WSM20S best suited for? The CCMT09T308-FW4 WSM20S (Walter Tools) is optimised for stainless steels and heat‑resistant superalloys; the WSM20S grade and Tiger‑tec Silver coating focus on thermal stability and reliable chip control. How does the FW4 chipbreaker affect performance? The FW4 chipbreaker on this insert promotes controlled chip formation and evacuation, reducing the risk of entanglement and improving surface consistency during turning of long‑chip materials. What does the 0.8 mm corner radius mean for productivity and finish? A 0.8 mm radius balances edge strength and surface finish: it increases resistance to edge chipping for productivity while still enabling an acceptable surface quality without excessive cutting forces. Is this insert suitable for interrupted cuts and roughing? Yes; the rhombic 80° geometry combined with the T3 plate thickness offers good edge support and clamping stability, making the insert appropriate for many interrupted‑cut and roughing scenarios. Can the insert be used in standard ISO toolholders? The insert’s CCMT geometry and size 09 match common ISO turning holders designed for rhombic inserts; ensure holder compatibility with the CCMT seat and clamping method. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT09T308-FW4 WSM30S FW4 Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating and the FW4 chipbreaker for stable chip control and extended tool life; the grade is specifically engineered for stainless steels and heat‑resistant alloys. Order the CCMT09T308-FW4 WSM30S directly via Metav Werkzeuge or contact our consultants for tailored cutting data and application support. CCMT09T308-FW4 WSM30S — Indexable turning insert, Tiger·tec Silver coating, 7° clearance (Walter Tools) A CCMT09T308-FW4 WSM30S indexable insert designed for precision turning of stainless steels and heat‑resistant superalloys, offering high wear resistance and dependable chip control for production environments Tiger·tec Silver coating for high wear resistance Suitable for stainless steels and superalloys FW4 chipbreaker for controlled chip formation 7° clearance and 0.8 mm corner radius Consistent cutting performance that reduces costs and downtime The combination of the Tiger·tec Silver coating and the WSM30S grade delivers a measurable improvement in wear resistance and tool life, which translates into fewer insert changes and reduced process interruptions. Designed for demanding materials, this solution supports secure chip formation when machining stainless steels and superalloys, minimising the risk of built-up edge and unpredictable tool wear. The result is a more economical production flow and consistent part quality, supporting tighter process windows and lowering overall machining costs. Controlled chip behaviour and reliable geometry for predictable results Geometry is crucial in turning operations: the FW4 chipbreaker is tuned for stable evacuation and predictable chip shapes, while the rhombus 80° form with 7° clearance and a 0.8 mm radius gives a balance between edge strength and finish capability. These features enable steady cutting forces and repeatable performance across batches. The insert’s form factor is compatible with standard CCMT toolholders, ensuring straightforward integration into existing toolsets and rapid changeover in multi‑shift production. Application flexibility and process security for production workshops With a tolerance class of M and a thickness of T3, this grade is suitable for serial production where reproducibility matters. The WSM30S grade is particularly effective on materials that are prone to work hardening or that generate high temperatures at the cutting zone, offering improved process security and surface integrity. Operators and process engineers benefit from the clear technical profile of the insert when selecting cutting data, making it easier to document and standardise setups across machines and sites. For application advice and supply of Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: CCMT09T308-FW4-WSM30S-WALTER Designation: CCMT09T308-FW4 ISO designation: CCMT09T308-FW4 WSM30S Manufacturer: Walter Tools Numbers / Core technical data Clearance angle: 7° Corner radius: 0.8 mm Plate size: 09 Thickness: T3 Tolerance class: M Plate form: Rhombus 80° Special features / Applications Coating: Tiger·tec Silver Grade: WSM30S Chipbreaker: FW4 Series: Tiger‑tec Silver Material suitability: S / M (superalloys/titanium and stainless steels) Product type: indexable turning insert FAQ Which materials is this insert designed for? The CCMT09T308-FW4 WSM30S from Walter Tools is optimised for stainless steels (M) and heat‑resistant superalloys (S), offering improved wear resistance and edge stability in these demanding material groups. How does the FW4 chipbreaker affect machining? The FW4 chipbreaker promotes controlled chip formation and reliable evacuation, reducing the likelihood of entanglement and improving surface finish when using the CCMT09T308-FW4 WSM30S in turning operations. Is the geometry compatible with standard toolholders? Yes, the rhombus 80° form and CCMT designation mean the insert fits standard CCMT toolholders, enabling straightforward replacement and integration into existing turning tool assemblies. What advantage does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating enhances thermal and abrasive wear resistance, extending insert life under elevated cutting temperatures and contributing to consistent part quality with the WSM30S grade. Can Metav Werkzeuge supply cutting data for this insert? Metav Werkzeuge can provide recommended cutting parameters and availability information for the CCMT09T308-FW4 WSM30S; refer to the SKU CCMT09T308-FW4-WSM30S-WALTER when enquiring. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
CCMT09T308-MK4 WKK10S Wendeplatten - Walter Tools
High wear resistance and stable chip control deliver reliable performance in cast‑iron turning; the coated grade ensures long tool life and consistent surface quality for productive series machining. Order the CCMT09T308‑MK4 WKK10S directly via Metav Werkzeuge or ask our consultants if needed. CCMT09T308‑MK4 WKK10S — Rhombic 80° turning and boring insert, Tiger·tec Silver, Walter Tools A CCMT09T308‑MK4 WKK10S coated carbide insert designed for efficient machining of cast iron in turning and bore‑work, offering controlled chip formation and extended tool life. Tiger·tec Silver coating for wear resistance Optimised for cast‑iron machining Rhombic 80° form with 0.8 mm nose radius 7° clearance and MK4 chipbreaker design Increased productivity through a wear‑resistant coating The combination of the Tiger·tec Silver coating and the WKK10S grade provides pronounced resistance to abrasive wear typical of grey and nodular cast irons. This coated carbide technology reduces flank wear and extends service intervals, which in turn lowers tooling costs and minimises machine downtime. The result is a reliable cutting edge that keeps productivity high during repetitive turning operations while maintaining consistent dimensional accuracy. Better surface finish and chip control from optimised geometry The Rhombic 80° geometry paired with a 0.8 mm nose radius creates a favourable balance between cutting strength and accessibility, making the insert suitable for a wide range of turning and finishing passes. The MK4 chipbreaker is engineered to handle the short, brittle chips produced by cast iron, improving evacuation and reducing risk of built‑up edge. A 7° clearance angle helps prevent rubbing and supports smooth, repeatable surface finishes on components. Practical versatility for workshop and production environments Designed as a multi‑purpose turning and boring insert, the CCMT form supports both roughing and finishing steps when the process parameters are set accordingly. The insert’s specifications favour cast‑iron workpieces (ISO group K), offering predictable tool life and stable cutting behaviour. For operations seeking an economical, straightforward solution for series turning of cast‑iron parts, this insert provides a sound balance of performance and simplicity. Contact Metav Werkzeuge today to discuss Walter Tools inserts such as the CCMT09T308‑MK4 WKK10S for cast‑iron turning and secure tailored recommendations; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CCMT09T308‑MK4‑WKK10S‑WALTER Designation: CCMT09T308‑MK4 ISO designation: CCMT09T308‑MK4 WKK10S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKK10S Product type: Boring/reboring and turning indexable insert Chipbreaker: MK4 Facts Clearance angle: 7° Corner radius: 0.8 mm Plate size: 09 Plate thickness: T3 Special features Coating: Tiger·tec Silver Material suitability: Gusseisen (cast iron) Plate form: Rhombic 80° Execution: T Tolerance class: M FAQ Which materials is this insert best suited for? The CCMT09T308‑MK4 WKK10S is optimised for cast iron (ISO group K) and is tuned to the abrasive wear and short‑breaking chips typical for these materials. What benefits does the Tiger·tec Silver coating provide? Tiger·tec Silver enhances wear resistance and cutting edge durability, improving tool life and consistency in machining cycles when using the WKK10S grade. Can the insert be used for both roughing and finishing? Yes, with appropriate parameter selection the rhombic 80° geometry and the MK4 chipbreaker allow both productive roughing and fine finishing steps. How does the MK4 chipbreaker affect chip formation? The MK4 chipbreaker promotes controlled, short chips for cast‑iron machining, aiding safe evacuation and reducing the likelihood of chip entanglement. Is this insert compatible with standard CCMT toolholders? The insert follows the CCMT designation and fits compatible toolholders designed for CCMT inserts; ensure correct clamping and seat condition for secure use. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
CCMT09T308-MK4 WKK20S WKK20S Wendeplatten - Walter Tools
The combination of Tiger‑tec Silver coating, the MK4 chipbreaker and the robust CCMT geometry delivers reliable, productive machining of cast iron components. Order the insert directly via Metav Werkzeuge or request technical consultancy if application advice is required. CCMT09T308-MK4 WKK20S drilling and turning indexable insert for cast iron, Tiger‑tec Silver, MK4 (Walter Tools) CCMT09T308-MK4 WKK20S is a versatile indexable insert designed for combined drilling/boring and turning operations in cast-iron applications Tiger‑tec Silver coating for enhanced wear resistance Optimised MK4 chipbreaker for controlled chip formation Rhombic 80° geometry for stable cutting performance 0.8 mm corner radius for durable cutting edge Durable coating for abrasive cast-iron machining The Walter grade WKK20S, produced within the Tiger‑tec Silver family, is a coated cemented carbide design optimised for abrasive cast-iron work. This grade balances hardness and toughness to resist the typical abrasive wear and the frequent short, breaking chips associated with cast materials. The result is extended tool life and predictable tool change intervals, which supports continuous production and reduces unplanned downtime. Geometry engineered for stability and repeatability A rhombic 80° cutting geometry combined with a 0.8 mm corner radius, 7° relief angle and T3 thickness gives the insert mechanical stability at the cutting edge and repeatable seating in the toolholder. The robust geometry reduces vibration in interrupted cuts and improves resistance to chipping, while the M tolerance class ensures consistent fit and reliable clamping across toolholders. These attributes support consistent surface quality and dimensional control in series production. Chip control that maintains throughput The integrated MK4 chipbreaker is designed to produce short, controllable chips when machining cast iron, reducing the risk of entanglement and ensuring uninterrupted operation. Controlled chip formation shortens cycle interruptions for chip evacuation and improves process reliability. Where intermittent cuts or varying depths are encountered, the chipbreaker helps maintain stable cutting forces and contributes to overall process security on the machine. Practical use and application advantages The insert is suitable for combined drilling and turning routines where flexibility and predictable performance are required. As a coated cemented carbide grade optimised for cast iron, it supports increased productivity through longer edge life and predictable wear behaviour. The insert designation and geometry allow easy integration into standard CCMT toolholders; cutting data should be selected in line with machine rigidity and component tolerances to exploit the full potential of the grade and chip control features. For application recommendations or to secure supply of Walter Tools CCMT09T308-MK4 WKK20S inserts, contact Metav Werkzeuge for direct ordering or specialist advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CCMT09T308-MK4-WKK20S-WALTER Article designation: CCMT09T308-MK4 WKK20S Manufacturer: Walter Tools Product type: Drilling/boring and turning indexable insert SKU: CCMT09T308-MK4-WKK20S-WALTER Facts Relief angle: 7° Corner radius: 0.8 mm Plate form: Rhombus 80° Plate size: 09 Plate thickness: T3 Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WKK20S Coating: coated cemented carbide Chipbreaker: MK4 Application: drilling and turning Suitable for: cast iron FAQ What materials is this insert intended for? The CCMT09T308-MK4 WKK20S insert is developed primarily for machining cast iron, using the WKK20S grade within the Tiger‑tec Silver family. How does the MK4 chipbreaker help in production? The MK4 chipbreaker produces short, controllable chips when cutting cast iron, reducing chip-related interruptions and supporting continuous throughput with improved process stability. Which features contribute most to edge life? The combination of Tiger‑tec Silver coating, the robust 0.8 mm corner radius and the insert’s Rhombic 80° geometry delivers enhanced wear resistance and reliable edge strength, prolonging service life. Is the insert suitable for both turning and drilling operations? Yes, the insert’s designation and geometry support combined drilling and turning routines; appropriate toolholder selection and cutting data are recommended for optimal results. What tolerance and fit can be expected for the insert? The insert is manufactured to an M tolerance class, ensuring consistent seating and repeatable clamping accuracy in compatible toolholders. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanation. There is no relationship between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
CCMT09T308-MM4 WMP20G MM4 Wendeplatten - Walter Tools
The Tiger·tec Gold grade and WMP20G coating ensure stable chip formation and extended edge life in stainless steel machining; combined with the 0.8 mm corner radius and MM4 chipbreaker, this insert gives consistent surface quality and reliable cycle times. Order the CCMT09T308-MM4 WMP20G directly via Metav Werkzeuge or ask our consultants if needed. CCMT09T308-MM4 WMP20G indexable insert for stainless steel machining — Walter Tools The CCMT09T308-MM4 WMP20G is an indexable insert engineered for turning and boring tasks on stainless steel, offering robust performance under medium to heavy cutting conditions. Tiger·tec Gold coated carbide Optimised for stainless steel machining 7° clearance for stable cutting 0.8 mm corner radius for edge strength Greater productivity through material-adapted grade and coating The WMP20G grade, part of the Tiger·tec Gold series, is a coated carbide specifically formulated for machining stainless steel, a group of alloys prone to work hardening and poor chip control. Thanks to the coating’s thermal resilience and the substrate’s toughness, the insert supports stable chip formation, reducing the risk of built-up edge and improving process security. This translates into more predictable tool life and fewer interruptions on the shop floor, which benefits cycle times and overall throughput. Geometry and edge design that improve process reliability Built in a Rhombus 80° shape with 7° clearance, the insert provides a secure seating and a geometry that helps control cutting forces during interrupted or continuous cuts. The 0.8 mm radius increases edge strength for tougher engagement and contributes to a consistently good surface finish when roughing into finish passes. The MM4 chipbreaker has been designed to manage stainless steel chips effectively, lowering the likelihood of entangling or ropey chips and supporting steady heat dissipation, which helps maintain dimensional accuracy over longer runs. Practical benefits for workshop efficiency and tool management The insert’s dimensions and chip control features simplify process parameter setting and make tool life more predictable, supporting lean production practices. Compatibility with common toolholders for CCMT-style inserts means fast indexation and minimal setup time, while the robust grade reduces the frequency of insert changes. Combined, these aspects promote lower machine downtime and better overall equipment effectiveness. Application advice is available from Metav Werkzeuge to match holder choice and cutting data to the intended stainless steel grade and operation. For tailored application support or availability of the Walter Tools CCMT09T308-MM4 WMP20G insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for fast, expert guidance and supply Technical Data Article number: CCMT09T308-MM4-WMP20G-WALTER Designation: CCMT09T308-MM4 WMP20G Product type: Drilling/boring and turning indexable insert Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Clearance angle: 7° Corner radius: 0.8 mm Insert size: 09 Insert thickness: T3 Tolerance class: M Special features Chipbreaker: MM4 Geometry: Rhombus 80° Grade: WMP20G (coated carbide) Material group: M (for stainless steel) Execution: T FAQ Is this insert suitable for machining stainless steel? Yes. The CCMT09T308-MM4 WMP20G insert from Walter Tools is formulated for stainless steel and the Tiger·tec Gold coating helps control chips and heat when cutting these alloys. What advantages does the MM4 chipbreaker provide? The MM4 chipbreaker on this insert improves chip control during stainless steel turning, promoting consistent chip shapes and reducing the risk of built-up edge and chip entanglement for safer, more stable machining. Can the insert deliver a good surface finish on final passes? Yes. The combination of the 0.8 mm corner radius and the Tiger·tec Gold grade supports improved edge strength and stable cutting, which assists in achieving a reliable surface finish in finish and semi-finish operations. Is this insert compatible with standard CCMT toolholders? The CCMT09T308-MM4 WMP20G follows the CCMT indexable insert geometry and is compatible with holders designed for that format; correct clamping and seat condition remain important for best results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product from the manufacturer.
CCMT09T308-MM4 WMP20S MM4 Wendeplatten - Walter Tools
Take advantage of high process stability and optimised chip control for reliable stainless steel turning; the combination of Tiger·tec Silver coating and an MM4 chipbreaker reduces rework and extends tool life. Specify availability via Metav Werkzeuge for fast delivery and technical consultation. CCMT09T308-MM4 WMP20S turning insert — Walter Tools, Tiger·tec Silver, suited for stainless steel, 7° relief CCMT09T308-MM4 WMP20S is an indexable turning and boring insert designed for machining stainless steels with robust chip control and consistent cutting performance Tiger·tec Silver coating for stainless steel Stable chip formation under tough conditions Rhombic 80° geometry, 7° relief angle Improved cutting reliability for stainless steels The combination of the WMP20S grade and Tiger·tec Silver technology offers a coated carbide solution optimised for the challenges of machining stainless steel. The cutting material supports secure chip formation where work-hardening and built-up edge can otherwise disrupt production. With the MM4 chipbreaker the insert promotes predictable chip segmentation and evacuation, which directly reduces stoppages and the risk of surface defects. This increases overall process efficiency and contributes to lower scrap rates. Geometry that delivers repeatable surface quality The rhombic 80° insert geometry, in conjunction with a 7° relief angle and a 0.8 mm nose radius, provides controlled engagement and stable cutting forces. The Rhombic 80° form is particularly suited to both profile turning and light shoulder work, allowing a balance between accessibility and strength. The T3 thickness ensures sufficient support for the cutting edge, improving repeatability when clamped in standard tool holders and helping to maintain a consistent surface finish across multiple components. Practical benefits for production workflows Adopting this grade and geometry reduces tool change frequency and supports stable machining windows in medium to robust operating conditions. The insert’s design enables straightforward integration into existing tool assemblies and minimises adjustment time on the shop floor. Backed by the reputation of Walter Tools, this solution contributes to a predictable production routine, helping to meet batch tolerances and maintain cycle-time targets with fewer interruptions. For reliable stainless steel performance specify the CCMT09T308-MM4 WMP20S from Walter Tools and contact Metav Werkzeuge for availability and application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CCMT09T308-MM4-WMP20S-WALTER Designation: CCMT09T308-MM4 WMP20S Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.8 mm Insert size: 09 Thickness: T3 Chipbreaker: MM4 Special features Series: Tiger·tec Silver Grade: WMP20S (coated carbide) Geometry: Rhombic 80° Material group: M (stainless steels) Application focus: stainless steel machining FAQ What materials is this insert intended for? This insert is specified for stainless steel applications; the WMP20S grade and Tiger·tec Silver technology support secure chip control when machining ISO M materials. How does the Tiger·tec Silver coating benefit processing? The Tiger·tec Silver coating on the CCMT09T308-MM4 improves wear resistance and thermal stability, helping the cutting edge remain sharp longer under stainless steel cutting conditions. Is the insert suitable for finishing operations? Yes, the combination of 0.8 mm nose radius and the rhombic 80° geometry provides good control for finishing and light profiling tasks with consistent surface quality. Which chipbreaker is fitted and what does it do? The insert uses an MM4 chipbreaker designed to promote stable chip formation and reliable evacuation in tougher cutting scenarios. Can this insert be used in existing tool holders? The CCMT form and dimensions follow standard insert interfaces, enabling compatibility with commonly used holders for turning and boring. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, brand-new product of the manufacturer.
CCMT09T308-MM4 WMP30G MM4 Wendeplatten - Walter Tools
Take advantage of the combination of proven chip control, robust edge stability and the Tiger·tec Gold coating for consistently productive stainless steel machining; order this insert directly via Metav Werkzeuge or consult our specialists for tailored recommendations. Drilling and turning indexable insert CCMT09T308-MM4 WMP30G for stainless steel – Walter Tools The CCMT09T308-MM4 WMP30G is a rhombic 80° indexable insert engineered for medium to heavy-duty machining of stainless steels, offering reliable chip formation and repeatable edge life. Tiger·tec Gold coating for process security Optimised MM4 chipbreaker for stable chips Rhombic 80° geometry, 0.8 mm corner radius Suitable for stainless steel machining Increased productivity through stable chip control The Tiger·tec Gold series grade delivers a combination of a high-performance coating and a wear-resistant substrate that together promote stable chip formation when cutting austenitic and other stainless steels. The integrated MM4 chipbreaker is designed to control chip flow at moderate to robust cutting parameters, which reduces interruptions for chip evacuation and minimises the risk of built-up edge. For production environments seeking higher throughput, this translates into fewer tool changes and a smoother process window without sacrificing surface quality. Reliable edge life and geometry for demanding operations The insert’s rhombic 80° shape with a 0.8 mm corner radius provides versatility between finishing and semi-finishing passes while the 7° clearance angle helps to reduce rubbing and heat generation at the cutting zone. These geometry choices support consistent contact conditions and reduce mechanical stress on the cutting edge, delivering improved tool life in tougher stainless steel grades. The nominal plate size and thickness mean stable seating in standard CCMT toolholders, helping to maintain reproducible results across batches. Simple specification and secure material match Specified as a coated carbide grade developed for material group M, the WMP30G designation indicates a Walter-developed solution optimised for stainless steel machining challenges, such as stickiness and work hardening. The insert is supplied in the ISO-style designation CCMT09T308-MM4, enabling straightforward selection against tooling data sheets and ensuring compatibility with common turning and drilling-holder systems. The robust indexable design supports predictable performance in series production and single-piece flow alike. Coating, substrate and application explained The Tiger·tec Gold technology combines a layered PVD/CVD-coated surface with a substrate tuned to resist crater wear and flank degradation. In practical terms, the coating reduces friction and thermal loading while the substrate sustains cutting-edge stability under intermittent loads typical in stainless steel operations. For workshops that run mixed lots or face variable material batches, this insert offers a balance of reliability and economy, reducing scrap risk and stabilising process capability indicators. Practical handling and tooling considerations The insert’s T3 thickness and CCMT format are compatible with standard tool clamps for turning and certain drilling/reaming adaptors; the rhombic form is suitable where approach angles and tool overhang vary. When paired with correctly selected cutting data for stainless steels, the combination of MM4 chip control and Tiger·tec Gold coating helps to maintain target surface finishes without excessive cycle-time increases. For optimisation support, Metav Werkzeuge can provide cutting data examples and selection advice for holder and grade pairing. Contact Metav Werkzeuge today at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss the CCMT09T308-MM4 WMP30G and secure the best inserts for stainless steel machining in specific applications Technical data Article number: CCMT09T308-MM4-WMP30G-WALTER Designation: CCMT09T308-MM4 WMP30G Manufacturer: Walter Tools Facts Series: Tiger-tec Gold Grade: WMP30G Plate form: Rhombus 80° Plate size: 09 Plate thickness: T3 Corner radius: 0.8 mm Clearance angle: 7° Chipbreaker: MM4 Material group: M (stainless steel) Special features Coated carbide grade optimised for stainless steel Designed for stable chip formation in medium to robust conditions Rhombic geometry for versatile turning and drilling use Standard CCMT format for common toolholders Walter Tools original product FAQ What materials is this insert intended for? The CCMT09T308-MM4 WMP30G is formulated for machining stainless steel (material group M) and performs best under medium to robust cutting conditions typical for these alloys. What does the MM4 chipbreaker do? The MM4 chipbreaker on the CCMT09T308-MM4 promotes consistent chip control and curl when machining stainless steel, reducing entanglement and improving process reliability. Can the insert be used in standard CCMT toolholders? Yes, the ISO designation CCMT09T308-MM4 indicates compatibility with standard CCMT-format holders commonly used for turning and certain drilling/reaming adaptors. How does the Tiger·tec Gold coating benefit production runs? Tiger·tec Gold provides a low-friction, wear-resistant surface that reduces thermal loading and helps maintain flank and crater wear resistance, thereby extending effective tool life in serial production. What geometry features support surface finish and tool life? The rhombic 80° form combined with a 0.8 mm corner radius and a 7° clearance angle helps to balance cutting forces and heat generation, supporting consistent surface quality and longer edge life. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
CCMT09T308-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of edge stability and reliable chip control for consistent component quality and longer tool life; the robust MM4 chipbreaker and Tiger‑tec Silver coating ensure stable cutting in stainless steels and superalloys. Order the insert directly via Metav Werkzeuge or consult our specialists for selection and application advice. CCMT09T308‑MM4 WSM01 indexable insert — Rhombic 80° geometry, 7° clearance | Walter Tools The CCMT09T308‑MM4 WSM01 is a coated carbide indexable insert designed for demanding turning and boring tasks, especially suited to stainless steels and heat‑resistant superalloys. Tiger‑tec Silver coating for edge stability Optimised MM4 chipbreaker for stainless steels Rhombic 80° form for versatile turning operations 0.8 mm corner radius for consistent surface finish Stable machining of stainless steels and superalloys for fewer interruptions The combination of the WSM01 grade and the Tiger‑tec Silver coating produces a cutting edge with improved thermal resistance and reduced tendency to build up material. For components made from stainless steels or heat‑resistant alloys, this leads to more reliable chip formation and fewer unscheduled tool changes. The MM4 chipbreaker is engineered to control chips in tough, gummy materials, which reduces manual intervention and helps maintain steady cycle times on production runs. Geometry tuned for dimensional consistency and surface finish The Rhombus 80° shape with a 7° clearance angle provides a balance between cutting edge strength and accessibility in shoulder and finishing cuts. A 0.8 mm corner radius supports a consistent surface finish while avoiding excessive cutting forces, which is particularly important when machining parts that require repeatable tolerances. Where accuracy matters, the tolerance class M ensures predictable insert dimensions for secure seating in toolholders and repeatable part results. Robust design that lowers unit cost and simplifies logistics Made as a coated carbide insert, this grade is intended for extended service life under thermal and mechanical stress. The plate thickness and T3 execution provide the rigidity needed for interrupted cuts and mixed‑operation turning. Taken together, the reduced scrap risk and longer indexable life contribute to a lower cost per component over extended production runs. For shops aiming to improve throughput without changing machining strategy, this insert offers an efficient path to more productive turning operations. For precision machining of stainless steels and superalloys with Walter Tools Tiger‑tec Silver inserts, contact Metav Werkzeuge for tailored recommendations and compatibility guidance. Technical data Article number: CCMT09T308-MM4-WSM01-WALTER Designation: CCMT09T308-MM4 WSM01 Series: Tiger‑tec Silver Grade: WSM01 Core data Clearance angle: 7° Corner radius: 0.8 mm Insert size: 09 Thickness: T3 Geometry: Rhombus 80° Chipbreaker: MM4 Tolerance class: M Features & applications Coating: Tiger‑tec Silver (coated carbide) Material suitability: stainless steels, heat‑resistant superalloys / titanium (S / M) Execution: T Typical uses: turning and boring operations, stable chip control, finishing and semi‑finishing FAQ What materials is this insert suitable for? The CCMT09T308‑MM4 WSM01 insert is formulated for stainless steels and heat‑resistant superalloys/titanium, combining the WSM01 grade with Tiger‑tec Silver coating for improved thermal stability. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker improves chip control in gummy and work‑hardening materials, helping to avoid built‑up edge and promoting continuous, safe chip flow during turning tasks. Will the 0.8 mm corner radius affect dimensional accuracy? A 0.8 mm corner radius offers a compromise between edge strength and surface finish; it helps maintain consistent part geometry while delivering improved tool life compared with very fine radii. Is the insert suitable for finishing operations? Yes, the combination of the Rhombus 80° geometry and the specified corner radius makes this insert suitable for finishing and light semi‑finishing passes where surface quality and repeatability are required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product from the manufacturer (Walter Tools).
CCMT09T308-MM4 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of reliable edge life, Tiger·tec Silver coating and a geometry optimised for stainless steels to keep production steady and minimise downtime. Order Walter Tools inserts directly via Metav Werkzeuge for fast supply and expert advice. CCMT09T308-MM4 WSM10S indexable insert — Tiger·tec Silver coating, for stainless steels | Walter Tools The CCMT09T308-MM4 WSM10S is an indexable turning and boring insert engineered for demanding machining of stainless steels and heat‑resistant alloys in industrial production. Tiger·tec Silver coating WSM10S grade for stainless steels Rhombic 80° geometry for versatile use 0.8 mm corner radius for reliable edge life Consistent cutting performance for demanding materials The coated carbide composition and the WSM10S grade deliver consistent performance when machining stainless steels and heat‑resistant superalloys. The combination of a wear‑resistant coating and a substrate tuned for toughness supports stable chip formation and reduces the risk of built‑up edge under thermally aggressive cutting. This stability translates into fewer unplanned tool changes and a more predictable production rhythm, improving overall process efficiency. Coating and grade designed to extend tool life The Tiger·tec Silver coating enhances heat resistance and abrasion protection, which is particularly relevant when processing materials that generate high cutting temperatures. The grade balances toughness and hardness to sustain a sound cutting edge, so the insert maintains dimensional reliability over longer tool life. For production planners this means lower tooling consumption and more consistent component quality across batch runs. Geometry and chip control that protect the edge A rhombic 80° form with a dedicated MM4 chipbreaker provides reliable chip control in turning and light boring operations, supporting smooth evacuation even with sticky alloys. The 0.8 mm corner radius and a 7° clearance angle combine to deliver robust edge strength while preserving surface finish, making the insert suitable for applications where edge stability and repeatability are priorities rather than aggressive metal removal in a single pass. Integration into machining processes and handling benefits The insert’s designation and familiar CCMT form factor make it straightforward to integrate into standard toolholders, simplifying inventory and setup. As a coated indexable solution from a recognised brand, it supports consistent process parameters and helps maintain reproducible component tolerances. Where process security and traceable tool performance are required, this type of insert contributes to predictable cycle times and reduced scrap rates. Contact Metav Werkzeuge for application recommendations, stock availability and to order Walter Tools CCMT09T308-MM4 WSM10S inserts for immediate use in stainless steel machining operations Technical Data SKU: CCMT09T308-MM4-WSM10S-WALTER Designation: CCMT09T308-MM4 ISO designation: CCMT09T308-MM4 WSM10S Series: Tiger·tec Silver Grade: WSM10S Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.8 mm Plate size: 09 Thickness: T3 Special features Chipbreaker: MM4 Form: Rhombic 80° Coating technology: Tiger·tec Silver Applicable material groups: S / M (heat‑resistant alloys, titanium and stainless steels) Tolerance class: M FAQ What materials is this insert suitable for? The CCMT09T308-MM4 WSM10S insert is intended for stainless steels (ISO M) and can also be used for heat‑resistant superalloys and titanium (ISO S) depending on geometry and cutting conditions. What benefit does the Tiger·tec Silver coating provide? Tiger·tec Silver enhances heat and wear resistance on the insert, which helps to maintain a stable cutting edge and improves service life in thermally demanding stainless steel machining. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker is designed to control chip shape and evacuation in turning and light boring, reducing the chance of entanglement and supporting consistent surface quality. Is the CCMT form compatible with standard toolholders? Yes, the CCMT09T308-MM4 format corresponds to common CCMT indexable insert holders, facilitating easy replacement and inventory integration. What does the 0.8 mm corner radius imply for surface finish? A 0.8 mm corner radius offers a compromise between edge strength and finish—providing improved edge robustness while still achieving a good surface quality on most stainless steel turning applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original, factory‑new goods of the manufacturer.
CCMT09T308-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Silver coating and the MM4 chipbreaker for stable chip control and extended edge life; the result is reliable, productive machining of demanding alloys. Order the insert directly via Metav Werkzeuge or consult our technical advisers for cutting-data optimisation. CCMT09T308-MM4 WSM20S turning insert by Walter Tools — Tiger·tec Silver, for rostfreier Stahl and superalloys The CCMT09T308-MM4 WSM20S is a coated carbide turning insert designed for heavy-duty and finish turning of rostfreier Stahl and heat-resistant superalloys, offering a balance of edge stability and wear resistance in demanding production environments Tiger·tec Silver grade WSM20S Suitable for rostfreier Stahl and superalloys Rhombic 80° insert form MM4 chipbreaker for consistent chips Reliable performance on difficult-to-machine alloys The insert is built around the WSM20S grade within the Tiger·tec Silver family, a coated carbide formulation optimised for applications where temperature and material toughness challenge tool life. The MM4 chipbreaker promotes predictable chip formation, reducing interruption from long, stringy chips and helping maintain a steady process. For shops processing rostfreier Stahl (ISO group M) and heat-resistant alloys (ISO group S), this combination reduces rework and increases effective cutting time, supporting higher overall throughput with fewer unscheduled tool changes. Geometry that balances strength and versatility A rhombic 80° shape with a 7° relief angle provides a robust cutting edge and access for common turning operations; the 0.8 mm corner radius absorbs cutting loads and improves finish when used in light- to medium-depth cuts. The T3 insert thickness and the CCMT-style pocket compatibility ensure secure clamping and stability under moderate radial forces. In practical terms, these geometry choices translate into smoother surface quality and an extended margin against edge chipping when compared with more acute geometries. Process benefits: consistency, longevity and predictability Using an insert from the Tiger·tec Silver family supports greater process reliability via optimised coating properties and a stable substrate. The result is longer tool life and consistent component quality across batch runs. The insert’s design helps to maintain cutting-edge integrity at elevated temperatures typical of rostfreier Stahl and superalloy machining, which in turn reduces machine downtime and improves cost-efficiency per component. For production engineers, that means more predictable planning and less variation between shifts. Contact Metav Werkzeuge for tailored cutting data and fast availability of Walter Tools inserts — our consultants will advise on insert selection and recommended cutting parameters. Technical data SKU: CCMT09T308-MM4-WSM20S-WALTER Designation: CCMT09T308-MM4 WSM20S turning insert Manufacturer: Walter Tools Core specifications Relief angle: 7° Corner radius: 0.8 mm Insert size: 09 Thickness: T3 Tolerance class: M Materials & features Grade/series: Tiger·tec Silver — WSM20S Chipbreaker: MM4 Insert form: Rhombic 80° Applicable material groups: rostfreier Stahl (M), superalloys / titanium alloys (S) Execution: T Applicable material codes: S / M FAQ What materials is this insert intended for? The CCMT09T308-MM4 WSM20S insert is specified for rostfreier Stahl (ISO group M) and heat-resistant superalloys (ISO group S), offering temperature-resistant performance and controlled chip formation. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker produces short, manageable chips and stabilises cutting forces, which improves process consistency and reduces interruptions during turning operations with challenging materials. Which features increase tool life in this grade? The combination of the Tiger·tec Silver coating and the WSM20S carbide grade enhances wear resistance at elevated temperatures, while the geometry (0.8 mm corner radius, rhombic 80°) protects the cutting edge against chipping. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT09T308-MM4 WSM30S MM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM30S grade for stable chip formation and extended edge life; the insert's Rhombic 80° geometry and 0.8 mm corner radius deliver strength and accessibility for demanding turning tasks. Order the CCMT09T308-MM4 WSM30S inserts via Metav Werkzeuge or consult our specialists for application-specific cutting data. CCMT09T308-MM4 WSM30S turning insert, Tiger·tec Silver — designed for rostfreier Stahl and heat-resistant alloys (Walter Tools) The CCMT09T308-MM4 WSM30S is a rhombic 80° turning insert developed for heavy-duty and difficult-to-machine materials, offering a balance of edge stability and chip control for modern production environments Tiger·tec Silver coating MM4 chipbreaker for controlled chips Suitable for rostfreier Stahl and superalloys Rhombic 80° form with 0.8 mm radius Consistent productivity when machining rostfreier Stahl and superalloys The combination of the Tiger·tec Silver coating and the WSM30S grade provides a clear productivity advantage when processing rostfreier Stahl and heat-resistant alloys. The advanced coating reduces thermal load and wear on the cutting edge, which translates into longer tool life and fewer indexings per workpiece. For production-oriented shops this means higher uptime and reduced tooling costs over time. The coated substrate supports a robust cutting edge that resists built-up edge and maintains dimensional consistency during extended runs. Reliable chip control and edge integrity for safer turning Built-in MM4 chip control ensures predictable chip breaking under a wide range of cutting conditions, improving swarf handling and machine safety. The 0.8 mm corner radius smooths load transitions at the cutting edge and reduces the tendency for notch formation during interrupted cuts. As a result, the insert promotes stable chip formation and reduces the need for secondary finishing, which benefits both cycle time and surface quality in serial production. Geometry that balances strength and access for varied applications The Rhombic 80° profile combines penetrating geometry with sufficient edge support to withstand moderate depths of cut. With a clearance angle of 7° and a plate thickness of T3, the insert is designed to offer a compromise between rigidity and cutting accessibility in confined tool holders. This geometry supports reliable performance in facing and turning operations where tool overhang or limited approach angles would otherwise restrict insert choice. Material grouping and recommended use cases explained The insert is optimised for ISO material groups M and S, meaning it is particularly suited to rostfreier Stahl (M) and heat-resistant superalloys or titanium (S). Materials in these groups generate heat at the cutting zone and can produce long, stringy chips; the WSM30S grade and the MM4 chipbreaker help to mitigate these issues by improving thermal resistance and chip breaking. For customers less familiar with ISO grouping: M = stainless steels; S = hot-work steels, superalloys and titanium. Selecting appropriate cutting data and coolant strategies further enhances tool life and process reliability. Contact Metav Werkzeuge for tailored cutting data, fast supply of Walter Tools CCMT09T308-MM4 WSM30S inserts and expert application advice Technical data Article number: CCMT09T308-MM4-WSM30S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCMT09T308-MM4 WSM30S Walter Tools Manufacturer: Walter Tools Grade: WSM30S Series: Tiger-tec Silver Material group: S / M Plate form: Rhombus 80° Relief angle: 7° Corner radius: 0.8 mm Plate size: 09 Thickness: T3 Chipbreaker: MM4 Facts Corner radius: 0.8 mm Relief angle: 7° Plate size designation: 09 Thickness: T3 Tolerance class: M Special features Coating technology: Tiger·tec Silver Substrate type: coated carbide Chip control: MM4 chipbreaker Main application: rostfreier Stahl and heat-resistant superalloys (ISO M / S) Series characteristics: designed for stable edge life and broad material coverage FAQ What materials is this insert suitable for? The CCMT09T308-MM4 WSM30S insert is specified for ISO groups M and S, making it suitable for rostfreier Stahl and heat-resistant superalloys depending on geometry and cutting data. How does the Tiger·tec Silver coating benefit performance? The Tiger·tec Silver coating on the WSM30S grade improves thermal resistance and wear behaviour, which enhances edge life and process stability in demanding turning applications. Which chipbreaker should be expected and what is its effect? This insert uses the MM4 chipbreaker, designed to produce controlled, short chips in a wide range of feed and depth combinations, aiding safe chip disposal and consistent surface finish. Can the insert handle interrupted cuts and heavier engagement? The Rhombic 80° geometry together with the 0.8 mm corner radius provides robust edge support that tolerates moderate interruptions and heavier engagement better than sharper radii. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is original factory-new goods of the manufacturer.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com