Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
ADMT120408R-D56 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKP25S grade for reliable machining of steel and cast iron; the parallelogram 85° geometry and 15° clearance angle ensure stable chip control and consistent edge life. Order the insert directly via Metav Werkzeuge or ask our consultants for application advice. ADMT120408R-D56 WKP25S milling indexable insert — Walter Tools, Tiger‑tec Silver, for steel and cast iron The ADMT120408R-D56 WKP25S is a parallelogram 85° milling insert designed for productive roughing and semi‑finishing of steels and cast irons in industrial metalcutting applications. Tiger‑tec Silver coating for wear resistance WKP25S grade optimised for P and K materials Parallelogram 85° for positive cutting engagement 15° clearance angle with 0.8 mm corner radius Robust grade and coating for longer productive life The insert uses the WKP25S carbide grade within the Tiger‑tec Silver technology, developed to balance wear resistance and toughness. This combination reduces flank wear under typical steel and cast‑iron cutting conditions and supports predictable toolchange intervals. The result is a higher process reliability and lower per‑part machining cost through consistent edge performance. The coated substrate is suited to the thermal and abrasive loads typical for P (steel) and K (cast iron) groups according to ISO classification. Geometry that stabilises cutting and improves chip control A parallelogram 85° shape together with a 15° clearance angle produces a favourable cutting‑force vector for slotting and face milling operations; it helps to reduce axial load peaks and promotes steady engagement with the workpiece. The integrated D56 chipbreaker manages chip formation for short, controllable chips on both steel and cast iron, which simplifies chip evacuation and reduces the risk of rework. The 0.8 mm corner radius gives a balanced edge strength that supports heavier cuts while retaining a fine surface finish when needed. Practical dimensions and application flexibility The insert is supplied in the ADMT120408R‑D56 geometry, size 12 with a thickness of 4, which fits common toolholders for medium‑duty milling tasks. Its tolerance class M and execution T ensure interchangeability within standard clamping systems and precise seating during index changes. Use of this insert in systematic cutter setups yields repeatable results and makes tool‑path planning more reliable across production batches. How this insert benefits workshop productivity By combining a modern coating system, a robust carbide grade and a chipbreaker tuned for mixed applications, the insert shortens set‑up cycles and reduces downtime caused by unpredictable edge failure. The design supports a wider range of cutting parameters, allowing process engineers to increase metal removal rates where machine capability and workholding allow. In practice, this means fewer interruptions for index changes and a smoother production flow. Discuss Walter Tools Tiger‑tec Silver inserts with Metav Werkzeuge to confirm the best grade and geometry for the specific steel or cast‑iron application and secure optimal cutter performance. Technical data SKU: ADMT120408R-D56-WKP25S-WALTER Article: ADMT120408R-D56 WKP25S Manufacturer: Walter Tools Product type: Milling indexable insert Series: Tiger‑tec Silver Grade: WKP25S Facts Clearance angle: 15° Corner radius: 0.8 mm Inscribed circle / size: 12 mm Thickness: 4 mm Plate angle: 85° (parallelogram) Tolerance class: M Special features Chipbreaker: D56 Coated carbide substrate Application groups: Steel (P) and Cast iron (K) Execution: T Designation: ADMT120408R-D56 FAQ What materials is this insert intended for? The ADMT120408R‑D56 WKP25S by Walter Tools is formulated for machining steel (P) and cast iron (K), using the WKP25S grade within the Tiger‑tec Silver range. How does the D56 chipbreaker affect machining? The D56 chipbreaker on this Walter Tools insert promotes short, controlled chips for both steel and cast iron, enhancing chip evacuation and reducing the risk of chip entanglement. What advantages does the Tiger‑tec Silver coating provide? Tiger‑tec Silver coating on the WKP25S grade improves wear resistance and thermal stability, extending the effective cutting life of the insert under typical industrial cutting conditions. Is the corner radius suitable for heavier cuts? The 0.8 mm corner radius offers a good compromise between edge strength and surface finish, supporting heavier roughing cuts while maintaining acceptable finishing capability. Can this insert be used in standard toolholders? The ADMT120408R‑D56 geometry and tolerance class M are compatible with common toolholder systems designed for parallelogram 85° inserts. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT120408R-D56 WKP35G Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold coating and a 0.8 mm corner radius delivers durable cutting edges and consistent chip control for demanding milling tasks; the insert’s 15° relief improves stability under load. Order the ADMT120408R-D56 WKP35G directly via Metav Werkzeuge or consult the specialists for application support. ADMT120408R-D56 WKP35G – Milling indexable insert, Tiger‑tec Gold (Walter Tools) An ADMT120408R-D56 WKP35G is a parallelogram 85° milling insert developed for productive machining of steel and cast iron. Tiger‑tec Gold coated grade WKP35G Designed for steel (P) and cast iron (K) Parallelogram 85° insert geometry 15° relief angle for stable cutting 0.8 mm corner radius for edge strength High productivity through advanced coating and grade The combination of Tiger‑tec Gold surface treatment and the WKP35G carbide grade is engineered to reduce wear and extend tool life under continuous cutting conditions. The coated hardmetal resists abrasive wear typical for ferritic and pearlitic materials, which improves process security and reduces the need for frequent index changes. By stabilising the cutting edge, the coating also contributes to predictable tool performance and consistent cycle times, supporting efficient production planning. Geometry that stabilises cuts and improves surface quality The parallelogram 85° geometry and 15° relief angle provide a balance between positive cutting action and mechanical support. This geometry reduces vibration and redirects cutting forces, resulting in enhanced edge stability and improved surface finish on workpieces. The 0.8 mm corner radius increases edge robustness, making the insert suitable for medium to heavy interrupted cuts while maintaining good dimensional accuracy on final passes. Application range and practical benefits in machining Designed for the ISO groups P and K, the insert is suitable for a broad range of steel and cast iron components. The integrated chipbreaker D56 supports controlled chip formation, lowering the risk of built‑up edge and easing chip evacuation in shoulder milling and slotting operations. For production environments seeking reproducible results, this insert offers a practical mix of wear resistance and chip control that reduces downtime and contributes to lower total machining cost per part. Handling, replacement and process integration The insert’s standard designation simplifies toolholder selection and inventory management. The ADMT120408R‑D56 family fits common milling cutter systems designed for parallelogram inserts, enabling straightforward replacement and repeatable positioning. Because tool life is extended by the grade and coating, the frequency of index changes is reduced, which helps maintain throughput in machining cells and lowers handling effort. For machining processes that demand reliability and longer edge life, contact Metav Werkzeuge for tailored application advice and to arrange supply of Walter Tools inserts: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number / SKU: ADMT120408R-D56-WKP35G-WALTER Designation: ADMT120408R-D56 ISO designation: ADMT120408R-D56 WKP35G Grade: WKP35G Series: Tiger‑tec Gold Manufacturer: Walter Tools Product type: Milling indexable insert Execution: T Facts Geometry: Parallelogram 85° Free angle: 15° Corner radius: 0.8 Size designation: 12 Plate thickness designation: 04 Chipbreaker: D56 Tolerance class: M Special features Coating: Tiger‑tec Gold Material suitability: P / K (steel and cast iron) Series description: Coated carbide grade for steel and cast iron Application focus: General milling operations requiring chip control and edge life Storytrigger: indexable inserts FAQ What materials is this insert suitable for? The ADMT120408R-D56 WKP35G is developed for machining steel (ISO group P) and cast iron (ISO group K) applications, leveraging the Tiger‑tec Gold coating to resist abrasive wear. How does the Tiger‑tec Gold coating affect tool life? Tiger‑tec Gold increases wear resistance and thermal stability on the cutting edge of the ADMT120408R-D56 WKP35G, resulting in longer service intervals and more consistent cutting performance. Which cutting tasks benefit most from this insert geometry? The parallelogram 85° geometry with a 15° relief is particularly effective in shoulder milling and light to medium roughing where a balance of positive cutting action and mechanical support is required. What is the role of the D56 chipbreaker on this insert? The D56 chipbreaker on the ADMT120408R-D56 WKP35G promotes controlled chip formation and evacuation, reducing the risk of built‑up edge and improving process stability during intermittent cuts. How does the 0.8 mm corner radius influence machining? A 0.8 mm corner radius increases edge robustness, improving resistance to chipping under heavier engagement and enabling improved surface integrity on semi‑finishing passes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original brand‑new goods of the manufacturer.
ADMT120408R-D56 WKP35S Wendeplatten - Walter Tools
Benefit from precise, repeatable machining with the Tiger·tec Silver‑coated ADMT120408R‑D56 WKP35S: excellent chip control from the D56 chipbreaker, consistent performance on steel and cast iron, and reliable edge life for productive milling. Order this milling insert directly via Metav Werkzeuge or consult our technical team for application advice. ADMT120408R-D56 WKP35S milling indexable insert for steel and cast iron, Tiger·tec Silver — Walter Tools The ADMT120408R-D56 WKP35S is a solid indexable milling insert engineered for efficient machining of P and K materials, combining a robust chipbreaker design with a coated substrate for stable performance in abrasive and heat‑intensive operations. Tiger·tec Silver coating Optimised D56 chip control Parallelogram 85° geometry 0.8 mm corner radius Improved process reliability through controlled chip formation The D56 chipbreaker and the insert geometry ensure predictable chip flow when machining steel and cast iron, in line with ISO 513 material groups. This leads to fewer tool interruptions and steadier cycle times, which is crucial for production environments that demand high throughput and repeatable part quality. The coated substrate supports wear resistance and helps maintain cutting edge integrity over longer tool life. Better surface finish and stable edge behaviour The combination of the WKP35S grade and the Tiger·tec Silver technology delivers wear resistance and toughness suitable for mixed‑batch work. The 0.8 mm corner radius and the 85° parallelogram form reduce the risk of chipping under intermittent cuts and support consistent surface quality on workpieces. This insert design converts material removal into a controlled process, improving first‑pass yield and reducing rework. Practical installation and production security With a standard indexable format and stable seating geometry, the insert is straightforward to integrate into common milling cutters and toolholders, enabling quick index changes and consistent clamping repeatability. The result is lower setup time and reliable part tolerances across shifts, making this solution well suited to both jobbing shops and series production where predictable tool life and minimal downtime are priorities. For efficient milling with Walter Tools' Tiger·tec Silver inserts, contact Metav Werkzeuge for technical matching and prompt supply — eMail: info@metav-werkzeuge.com / Tel: +49 2822 7131930 Technical data Article number: ADMT120408R-D56-WKP35S-WALTER SKU: ADMT120408R-D56-WKP35S-WALTER Product type: Milling indexable insert Manufacturer: Walter Tools Grade: WKP35S Facts Free angle: 15° Corner radius: 0.8 mm Plate size: 12 Thickness: 04 Tolerance class: M Special features Series: Tiger·tec Silver Chipbreaker: D56 Shape: Parallelogram 85° Material application: P (steel), K (cast iron) Execution: T Material type: P / K FAQ Which materials can be machined with this insert? The ADMT120408R‑D56 WKP35S is designed for steel (P) and cast iron (K) applications in accordance with ISO 513 material groupings. What advantages does the Tiger·tec Silver coating provide? Tiger·tec Silver on the WKP35S grade enhances wear resistance and temperature stability, helping the insert retain cutting edge performance during extended runs. How does the D56 chipbreaker affect machining? The D56 chipbreaker promotes controlled chip formation and evacuation, reducing the likelihood of built‑up edge and lowering the risk of machine interruptions during milling. Is the 0.8 mm corner radius suitable for finishing operations? A 0.8 mm corner radius balances edge strength with the ability to achieve fine surface finishes; it is appropriate for many finishing and medium‑cutting conditions. Can the insert be used in common indexable milling cutters? Yes, the geometry and size conform to standard indexable insert configurations, allowing compatibility with typical milling cutter systems that accept this insert format. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product names are mentioned for explanation purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
ADMT120408R-D56 WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold PVD grade and the robust WSP45G cutting grade combined with the 15° relief and a 0.8 mm corner radius for consistent material removal and extended tool life; order the inserts directly via Metav Werkzeuge or request tailored advice from the consultants. ADMT120408R-D56 WSP45G — Fräswendeschneidplatte (milling indexable insert) by Walter Tools, Tiger·tec Gold coating, P/M/S suitability ADMT120408R-D56 WSP45G is a PVD-coated indexable insert designed for versatile milling of steels, rostfreie Stähle and heat-resistant alloys in demanding production environments Tiger·tec Gold PVD coating for high wear resistance Versatile for Stahl, rostfreier Stahl and superalloys Parallelogram 85° form for stable cutting geometry 15° relief and 0.8 mm corner radius for secure edge strength Increased process reliability through coating and grade The combination of Tiger·tec Gold technology with the WSP45G grade provides a balance of wear resistance and edge stability that supports longer tool life and fewer interruptions in production. The PVD-coated carbide construction reduces flank wear and improves resistance to thermal and mechanical loads during continuous milling. In practice, this means more consistent component tolerances and fewer insert changes, which contributes directly to higher uptime and lower process costs. Where high machining reliability is a priority, the coated grade performs well across typical industrial cycles. Clear material range and machining benefits This insert is specified for group P / M / S, indicating suitability for machining unalloyed and alloyed Stahl, rostfreier Stahl and heat-resistant superalloys or titanium. The chemical and mechanical demands of these groups are different: steels tend to produce more predictable chips, rostfreie Stähle require control of heat and built-up edge, and superalloys demand thermal resistance and cutting-edge robustness. The WSP45G composition has been formulated to address these challenges, enhancing chip control and helping to maintain a stable cutting edge under elevated temperatures and difficult chip formation conditions. Geometry that supports secure cutting and predictable results The parallelogram 85° insert form, combined with a 15° relief and a 0.8 mm corner radius, grants a favourable force distribution and reliable edge strength during interrupted and continuous milling operations. The specific D56 chipbreaker geometry promotes controlled chip evacuation in a wide range of feeds and depths of cut, reducing the risk of recutting and surface defects. Operators benefit from more predictable tool behaviour and improved surface finish, while process engineers gain leeway to optimise cutting parameters for productivity without compromising component quality. Practical handling and application context The insert is supplied in execution code T and thickness code 04, with size code 12 and the ISO designation ADMT120408R-D56 WSP45G, allowing simple integration into existing toolholders that accept the corresponding insert family. The tolerance class M supports consistent fitting accuracy, which is essential for repeatable results in serial production. Because the insert is an indexable component, fast index changes minimise downtime and simplify inventory management compared with solid tools, supporting leaner workshop logistics and quicker tool set-ups. For application guidance, batch recommendations or to order Walter Tools ADMT120408R-D56 WSP45G inserts under Tiger·tec Gold for enhanced milling performance, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ADMT120408R-D56-WSP45G-WALTER Label: Fräswendeschneidplatte ADMT120408R-D56 WSP45G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Grade: WSP45G Series: Tiger-tec Gold Execution code: T Tolerance class: M UID: ADMT120408R-D56-WSP45G-WALTER Facts Relief angle: 15° Corner radius: 0.8 mm Size code: 12 Thickness code: 04 Chipbreaker: D56 Insert form: Parallelogram 85° Special features Material suitability: P / M / S Designed for: milling applications Axite enrichment: Serie: Tiger-tec Gold; Sorte: WSP45G; beschichtetes Hartmetall; zähe, vielseitige PVD-Sorte für Fräsanwendungen Toleranzklasse: M Storytrigger: wendeplatten FAQ What materials can be machined with this insert? The ADMT120408R-D56 WSP45G insert is suitable for P / M / S groups, i.e. Stahl, rostfreier Stahl and heat-resistant superalloys/titanium, according to the grade characteristics. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold PVD coating on the WSP45G grade improves wear resistance and thermal stability, increasing tool life and maintaining cutting-edge integrity under demanding milling conditions. How does the insert geometry affect milling performance? The parallelogram 85° form, 15° relief and 0.8 mm corner radius deliver stable cutting forces, secure edge strength and controlled chip flow, benefiting surface finish and process predictability. Is this insert compatible with standard indexable milling holders? The ISO designation ADMT120408R-D56 defines the insert family and size; holders designed for ADMT-style inserts will accept this insert form and allow straightforward integration. What chip control can be expected from the D56 breaker? The D56 chipbreaker is engineered for consistent chip formation across a range of feeds and depths of cut, supporting reliable evacuation and reducing the likelihood of recutting. Can this insert be used for high-speed machining? The WSP45G grade and Tiger·tec Gold coating offer good thermal and wear resistance that supports elevated cutting speeds in many milling operations; final parameter selection should follow machine and workpiece constraints. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, brand-new goods of the manufacturer.
ADMT120408R-F56 WAK15 Wendeplatten - Walter Tools
The combination of a specialised WAK15 grade and a chipbreaker F56 ensures reliable machining of aluminium and other non‑ferrous metals while the precise parallelogram 85° geometry reduces setup time and rework; order directly via Metav Werkzeuge or consult our specialists for cutting-data optimisation. ADMT120408R-F56 WAK15 – Milling indexable insert by Walter Tools, uncoated carbide for aluminium, chipbreaker F56 A ADMT120408R-F56 WAK15 indexable insert designed for high‑quality milling of aluminium and non‑ferrous metals, combining a sharp cutting edge with a geometry that reduces built‑up edge and supports stable chip formation WAK15 grade for aluminium and non‑ferrous metals Chipbreaker F56 for controlled chip formation Parallelogram 85° form for stable cutting 0.8 mm corner radius and 15° relief angle Consistent high performance for non‑ferrous machining The WAK15 uncoated carbide composition is tailored for machining aluminium and other non‑ferrous materials, offering a sharp cutting edge and low adhesion properties that minimise built‑up edge. Combined with the chipbreaker F56, this insert promotes predictable chip control and reduces interruptions caused by clogged flutes. The result is improved process stability and higher effective machining time per tool change, which supports leaner production and consistent component quality. Geometry that reduces rework and improves surface finish The insert’s parallelogram 85° form together with a 15° relief angle and 0.8 mm corner radius delivers a balance between edge strength and surface integrity. These geometrical features help achieve a finer surface finish on cast and machined aluminium parts and lower the likelihood of burr formation at corners. With tolerance class M, dimensional repeatability is maintained across index changes, aiding predictable tool offsets and reducing time spent on manual corrections. Practical economy and straightforward integration in production Supplied in the Walter N‑grade system, this insert fits established milling bodies and simplifies inventory with a clear designation. The nominal 12 mm size and nominal thickness (04) provide a robust platform for moderate cutting parameters while keeping indexable insert replacement quick and safe. The design supports higher feeds typical for non‑ferrous machining, helping to shorten cycle times and lower per‑part tooling costs without sacrificing surface quality. For tailored cutting data or to confirm compatibility with specific toolholders, contact Metav Werkzeuge for expert advice and ordering support for Walter Tools inserts. Technical Data Article number: ADMT120408R-F56-WAK15-WALTER Designation: ADMT120408R-F56 WAK15 Manufacturer: Walter Tools Product type: Milling indexable insert Facts Size: 12 mm Thickness: 04 (nominal) Corner radius: 0.8 mm Relief angle: 15° Plate form: Parallelogram 85° Chipbreaker: F56 Tolerance class: M Special features Uncoated carbide grade WAK15 Series: Walter N‑grade system Intended for aluminium and non‑ferrous metals (ISO group N) Sharp edge geometry, reduced material adhesion Stable chip formation, optimised for high feed machining FAQ What materials is this insert suitable for? This insert is suitable for aluminium and other non‑ferrous metals; the WAK15 grade and chipbreaker F56 are optimised for ISO group N materials. Is the ADMT120408R‑F56 compatible with standard Walter toolholders? Yes, the insert is part of the Walter N‑grade system and is intended for use with matching Walter milling bodies and clamping systems. How does the chipbreaker F56 affect productivity? The F56 chipbreaker produces predictable chip segments and reduces the risk of built‑up edge, which contributes to longer uninterrupted machining periods and more consistent cycle times. What tolerances and repeatability can be expected? The insert is specified to tolerance class M, supporting repeatable indexing and stable offsets for precision milling operations. Can this insert be used for finishing passes? With its 0.8 mm corner radius and sharp geometry, the insert can be applied to light finishing when parameters are set appropriately for non‑ferrous materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group and is recognised as a leading manufacturer of precision tools for metalworking. Protected trademarks and trade names are the property of their respective owners and are mentioned here for explanatory purposes only; no affiliation with our company is implied. The offered article is an original, brand‑new product of the manufacturer.
ADMT120408R-F56 WKK25G WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance, the F56 chipbreaker tailored for cast iron and a secure parallelogram seating for uninterrupted production — order directly via Metav Werkzeuge or consult our experts for application advice. ADMT120408R-F56 WKK25G milling insert for cast iron – Tiger‑tec Gold by Walter Tools The ADMT120408R-F56 WKK25G is a robust milling insert in parallelogram 85° form, developed for productive machining of cast iron with a Tiger‑tec Gold coated carbide grade. Tiger‑tec Gold coated carbide WKK25G Optimised F56 chipbreaker for cast iron Parallelogram 85° geometry for secure seating 15° clearance angle with 0.8 mm corner radius Deliver predictable productivity in cast iron milling The ADMT120408R-F56 WKK25G combines the Tiger‑tec Gold coating with the WKK25G grade to address the abrasive wear and fragmented chip behaviour typical of cast iron. The result is consistent cutting-edge performance and lower frequency of flank wear, which translates into fewer tool changes and more stable cycle times. The integrated F56 chipbreaker is optimised to control short, brittle chips from cast materials, reducing the risk of clogging and improving process reliability on milling operations. Geometry that ensures secure seating and repeatable accuracy The parallelogram 85° form, together with a 15° clearance angle and 0.8 mm corner radius, provides a compact contact footprint and reliable clamping stability. These geometric choices support repeatable insert indexing and help maintain toolpath accuracy under varying cutting loads. For production runs where dimensional stability and surface quality matter, the geometry reduces vibration and supports predictable results across batches. Longer edge life, less downtime, measurable efficiency gains Coated carbide technology and a grade tuned for abrasive cast iron reduce progressive wear mechanisms and deliver longer edge life. In practice, this means fewer interruptions for tool changes and a more economical manufacturing flow. The coated surface promotes a stable cutting edge and improved heat resistance, which together enhance productivity and cut overall processing costs through reduced downtime. Clear application scope and selection guidance Designed specifically for machining Gusseisen (cast iron) per ISO group K, this insert excels in both roughing operations and finishing passes where chip control and edge stability are crucial. The product data identifies suitability for cast iron; other material groups are not specified for this grade. For process optimisation and cutting parameter recommendations with the Walter Tools Tiger‑tec Gold system, Metav Werkzeuge can provide tailored advice and machining data. Contact Metav Werkzeuge for application support and to discuss how the Walter Tools Tiger‑tec Gold ADMT120408R-F56 WKK25G insert can improve cast iron milling performance Technical Data Article number: ADMT120408R-F56-WKK25G-WALTER Designation: ADMT120408R-F56 WKK25G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WKK25G Facts Clearance angle: 15° Corner radius: 0.8 mm Plate form: Parallelogram 85° Plate size: 12 Plate thickness: 04 Tolerance class: M Special features Chipbreaker: F56 Coating: Tiger‑tec Gold Carbide type: coated carbide (WKK25G) Application: cast iron (ISO group K) Execution: T FAQ Which materials is this insert designed for? The ADMT120408R-F56 WKK25G milling insert by Walter Tools is developed for machining cast iron (ISO group K) and is optimised to handle the abrasive, short-chip behaviour of these materials. What does the WKK25G designation indicate? WKK25G identifies the Walter Tools carbide grade within the Tiger‑tec Gold family; the grade offers a coated carbide composition tuned for wear resistance on cast iron. How does the F56 chipbreaker affect machining? The F56 chipbreaker on this insert controls short, brittle chips typical of cast iron, improving evacuation and reducing the chance of chip packing during milling. Is the geometry suitable for stable production runs? Yes, the parallelogram 85° shape combined with a 15° clearance angle and a 0.8 mm corner radius provides secure seating and repeatable indexing for stable production performance. Can the ADMT120408R-F56 WKK25G be used for finishing as well as roughing? The insert’s grade and chipbreaker make it suitable for a range of operations on cast iron, from high‑volume roughing to quality finishing passes where chip control and edge integrity matter. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. The mentioned brand names are used for explanation only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the respective manufacturer.
ADMT120408R-F56 WKP25S Wendeplatten - Walter Tools
Benefit from a combination of coated-carbide performance, proven chip control and a geometry built for rigid clamping; the result is reliable machining of steel and cast iron with reduced downtime. Order the insert directly via Metav Werkzeuge or consult their specialists for application-specific recommendations. ADMT120408R-F56 WKP25S indexable milling insert — Tiger·tec Silver, for steel and cast iron machining (Walter Tools) A ADMT120408R-F56 WKP25S indexable milling insert engineered for medium- to high-productivity milling of steel (P) and cast iron (K) components. *Tiger·tec Silver coating for enhanced wear resistance *Suitable for steel and cast iron applications *Parallelogram 85° shape with 0.8 mm corner radius *15° positive relief for reliable chip control Consistent wear resistance for sustained production The cutting grade is based on Tiger·tec Silver technology and the WKP25S coated-carbide matrix, combined with the chipbreaker F56. This specification provides improved abrasion resistance and stable edge behaviour during continuous operation, which translates into fewer tool changes and predictable performance. The coating and grade are tuned for the heat and chip characteristics typical of machining steel and cast iron, delivering a balance between life and surface finish without requiring specialist tooling knowledge. Geometry that secures rigidity and accurate engagement The insert’s parallelogram 85° form and 0.8 mm radius support robust clamping and controlled entry angles, reducing vibration in interrupted or heavy cuts. A 15° relief reduces contact at the flank while maintaining support for axial loads. Physical dimensions such as size 12 and thickness 04, together with tolerance class M, make the insert compatible with standard holders designed for this ISO-style designation and ensure repeatable seating for reproducible results. Practical benefits for shop-floor efficiency Because the grade and chipbreaker target common production materials, shops can expect improved chip control and predictable flank wear, contributing to process stability and fewer unplanned stoppages. The combination of grade and geometry supports cost-effective machining by extending tool life and lowering cycle-time variability. Conforming to ISO 513 material groupings, the insert is rated for P (steel) and K (cast iron) use, which helps planners select tooling with a sound technical basis rather than trial-and-error. Easy handling and straightforward integration into tooling systems The insert is supplied in the standard ADMT-style format and is intended for straightforward indexing within compatible milling holders. The WKP25S grade and Tiger·tec Silver series simplify grade selection for mixed-production environments where both steel and cast iron appear on the worklist. Labelled with the ADMT geometry, the insert fits established clamping systems without the need for bespoke adapters, enabling fast changeovers and predictable fixture performance. For application advice, cutting-parameter guidance or to secure supply of Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 for direct consultation and swift delivery. Technical data SKU: ADMT120408R-F56-WKP25S-WALTER Article designation: ADMT120408R-F56 WKP25S Brand: Walter Tools Series: Tiger-tec Silver Specifications Plate size: 12 Thickness: 04 Relief angle: 15° Corner radius: 0.8 mm Plate form: Parallelogram 85° Chipbreaker: F56 Tolerance class: M Materials & features Coating: Tiger·tec Silver Grade: WKP25S (coated carbide) Applicable materials: steel (P), cast iron (K) Execution: T Material composition: P / K FAQ What materials is this insert intended for? The ADMT120408R-F56 WKP25S insert from Walter Tools is formulated for steel (P) and cast iron (K) machining, consistent with the ISO 513 groupings assigned to the WKP25S grade. How does the Tiger·tec Silver coating benefit milling applications? The Tiger·tec Silver coating on the WKP25S grade improves abrasion resistance and edge stability during continuous milling, which supports longer tool life and consistent surface quality when using the ADMT120408R-F56 geometry. Which geometric features improve clamping and chip control? The parallelogram 85° form, 0.8 mm radius and chipbreaker F56 combine to enhance clamping stability and chip formation, while the 15° relief reduces flank contact for reliable engagement in interrupted and full-width cuts. Is this insert suitable for stainless steel or hardened materials? The WKP25S specification provided indicates suitability for steel and cast iron; stainless steel and hardened-material suitability are not specified for this insert and should be verified with Metav Werkzeuge before use. How is the insert identified and ordered for production use? Order by SKU ADMT120408R-F56-WKP25S-WALTER or by the ISO designation ADMT120408R-F56 WKP25S; the Walter Tools grade and Tiger·tec Silver series are referenced to ensure correct material and coating selection. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen; Germany. The Walter AG (market presence: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. The item offered is original factory-new merchandise from the manufacturer.
ADMT120408R-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WKP35G grade for consistent chip control and long tool life; the insert is optimised for machining steel and cast iron to maintain a steady production flow. Order the ADMT120408R-F56 WKP35G directly via Metav Werkzeuge or ask our consultants if needed. ADMT120408R-F56 WKP35G parallelogram milling insert for steel and cast iron — Walter Tools The ADMT120408R-F56 WKP35G is a parallelogram milling insert designed for secure clamping and efficient chip formation in steel and cast iron applications. Tiger·tec Gold coated solid carbide grade Optimised for steel and cast iron machining Parallelogram 85° form for secure toolholding 15° relief and 0.8 mm corner radius High-performance grade for demanding steel and cast-iron operations The combination of the WKP35G grade and Tiger·tec Gold coating delivers a durable cutting edge that resists abrasive wear and maintains performance under thermal load. Engineered for the ISO groups P and K, this grade is balanced to handle the continuous heat generation typical of steel machining while offering the fracture resistance required for cast iron. The result is stable chip control and reduced edge chipping, which supports longer intervals between tool changes and more predictable process outcomes. Geometry that increases stability and surface quality The insert’s Parallelogram 85° form and 15° relief reduce toolholder stress and improve seating precision, which helps to diminish vibration during operation. With a 0.8 mm corner radius and the F56 chipbreaker, the geometry is tailored to produce consistent chip segmentation and good surface finishes. These features translate into improved dimensional repeatability and a lower risk of unexpected rework, especially in serial production where each component’s surface integrity matters. Productivity benefits and process reliability for production environments Tolerance class M and the robust coated-carbide construction combine to offer reliable performance in both roughing and finishing tasks, depending on toolpath and holder geometry. The chipbreaker design supports effective evacuation under varied cutting conditions, helping to keep cycle times down and machine utilisation high. For process engineers, this means a predictable tool life and the possibility to optimise cutting parameters for cost-effective throughput while maintaining component quality. For high-productivity machining with Walter Tools’ WKP35G grade, contact Metav Werkzeuge for cutting-data recommendations and ordering: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ADMT120408R-F56-WKP35G-WALTER Article name: ADMT120408R-F56 WKP35G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Relief angle: 15° Corner radius: 0.8 mm Inscribed circle / size: 12 mm Thickness code: 04 Tolerance class: M Chipbreaker: F56 Form: Parallelogram 85° Special features Grade: WKP35G (coated carbide, Tiger·tec Gold) Material suitability: Steel (P) and cast iron (K) Application: general milling — finishing and roughing dependent on geometry Stable chip formation and good edge stability FAQ Which materials is this insert suitable for? The ADMT120408R-F56 WKP35G insert from Walter Tools is designed for ISO groups P and K, meaning it is suitable for machining steel and cast iron. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WKP35G grade improves wear resistance and reduces thermal loading at the cutting edge, extending tool life and supporting consistent surface quality. How does the F56 chipbreaker affect machining? The F56 chipbreaker promotes controlled chip segmentation and evacuation, which helps to avoid built-up edge and maintains process stability during continuous milling operations. What does tolerance class M mean for production? Tolerance class M indicates a medium tolerance level that balances manufacturing cost and dimensional precision suitable for many industrial milling applications. Can this insert be used for both roughing and finishing? Depending on the specific toolholder, cutting data and component geometry, the ADMT120408R-F56 WKP35G can be employed for both roughing and finishing operations; cutting conditions should be adjusted to match the desired outcome. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT120408R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Silver coating and the WKP35S grade for stable chip formation and long tool life, together with the parallelogram 85° geometry for reliable engagement in interrupted cuts; order directly via Metav Werkzeuge or consult our specialists for tailored cutting data. ADMT120408R-F56 WKP35S milling indexable insert – F56 chipbreaker, parallelogram 85° (Walter Tools) The ADMT120408R-F56 WKP35S is a high‑performance milling insert designed for machining Stahl and cast iron in a range of milling operations Tiger‑tec Silver coated carbide grade WKP35S Optimised for Stahl and cast iron machining Parallelogram 85° insert geometry F56 chipbreaker for consistent chip control Boosted productivity with consistent chip control The Tiger‑tec Silver coating combined with the WKP35S grade delivers a balanced mix of wear resistance and toughness, which translates into longer tool life and fewer index changes on the shop floor. The F56 chipbreaker is engineered for reliable chip segmentation in mixed cutting conditions, reducing recutting and minimising downtime for chip clearing. With a stable cutting edge and the parallelogram form, the insert provides predictable cutting behaviour in interrupted and continuous milling, helping to keep cycle times steady and quality consistent. This makes the insert especially suitable where repeatability and process stability are priorities. Machining capability tailored to Stahl and cast iron The insert is specified for machining the ISO groups P and K, meaning it handles unalloyed and alloyed Stahl as well as cast iron. The grade is adapted to the typical heat generation and chip formation of these materials: it offers abrasion resistance for the abrasive nature of cast iron while maintaining edge stability for Stahl applications. The geometry and chipbreaker promote short, controlled chips when working cast components and allow efficient heat dispersion during aggressive cuts in Stahl. Users benefit from fewer surface defects and a reduced need for secondary finishing operations. Geometry and cutting data that support process reliability A clearance angle of 15° and a corner radius of 0.8 mm create a cutting edge that balances robustness with surface quality. The parallelogram 85° form ensures correct cutting edge orientation for axial and radial forces common in face and shoulder milling. The insert’s tolerance class M reflects manufacturing accuracy for consistent seating and repeatable results in standard tool holders. For applications requiring a combination of roughing and finishing, the moderate corner radius improves edge strength under load while still permitting acceptable surface finishes. For precise cutting parameters or recommendations for specific machine/toolholder setups, refer to Metav Werkzeuge’s technical advisory. Contact Metav Werkzeuge for machining recommendations and to request batch availability for Walter Tools Tiger‑tec Silver inserts; eMail: info@metav-werkzeuge.com / Tel: +49 2822 7131930 Technical data SKU: ADMT120408R-F56-WKP35S-WALTER Article designation: ADMT120408R-F56 WKP35S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKP35S Facts Corner radius: 0.8 mm Clearance angle: 15° Insert form: Parallelogram 85° Insert size: 12 Thickness: 04 Chipbreaker: F56 Tolerance class: M Special features Coated carbide grade designed for Stahl and cast iron Stable chip formation and optimised chip control High process reliability in intermittent cutting Suitable for a range of milling applications Robust edge for extended tool life FAQ What materials is this insert suited for? The ADMT120408R-F56 WKP35S insert is designed for machining Stahl (ISO group P) and cast iron (ISO group K), offering wear resistance for abrasive cast materials and edge stability for Stahl. How does the F56 chipbreaker influence machining? The F56 chipbreaker promotes consistent chip segmentation and evacuation, reducing recutting and supporting stable cutting forces during both roughing and finishing passes with the ADMT120408R-F56 WKP35S. What does the 0.8 mm corner radius mean for surface finish? A 0.8 mm corner radius provides a compromise between edge strength and surface quality: it improves tool durability under load while still allowing acceptable surface finishes for many general milling operations. Is the insert suitable for interrupted cuts? Yes, the parallelogram 85° geometry and the coated WKP35S grade are engineered to withstand interrupted cutting conditions and maintain edge security during engagement. How does the 15° clearance angle affect cutting behaviour? The 15° clearance angle reduces rubbing and allows a positive cutting action that helps manage cutting temperatures and extend edge life, especially in mixed-material operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, factory‑new goods of the manufacturer Walter Tools.
ADMT120408R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Combining the WSM35G Tiger‑tec Gold coating with the Parallelogram 85° geometry and the F56 chipbreaker provides stable chip formation and extended edge life in demanding machining of stainless and heat‑resistant alloys. Order this insert directly via Metav Werkzeuge or request tailored advice from our consultants. ADMT120408R-F56 WSM35G indexable milling insert — Tiger‑tec Gold for stainless steel and superalloys | Walter Tools The ADMT120408R-F56 WSM35G is an indexable milling insert engineered for reliable, high‑stability cutting in stainless steels and heat‑resistant superalloys and titanium applications. Tiger‑tec Gold coating, WSM35G grade Optimised for stainless steel and superalloys Parallelogram 85° insert geometry Chipbreaker F56 for stable chip control 0.8 mm corner radius for reliable edge life Robust coated grade for demanding alloys and elevated temperatures The combination of Tiger‑tec Gold coating and the WSM35G grade means the insert is designed to counteract the specific challenges of machining stainless steels and heat‑resistant alloys. These materials tend to work‑harden and generate higher cutting temperatures, which can cause built‑up edge and premature wear. A coated carbide grade with optimised coating architecture improves heat resistance and reduces adhesion at the cutting edge, resulting in more consistent flank wear progression and predictable tool life. In practice, this leads to fewer unscheduled tool changes and a more consistent production output. Geometry and chip control for consistent surface quality The Parallelogram 85° shape and the F56 chipbreaker are chosen to provide dependable chip formation and evacuation when machining ductile, heat‑sensitive materials. The insert’s 15° clearance angle supports secure entry and reduced rubbing on the workpiece, while the 0.8 mm corner radius balances edge strength with surface finish requirements. Effective chip control reduces rework and improves operator safety by diminishing stringy chips in stainless and nickel‑based alloys. These geometric choices support a reliable surface finish and repeatable dimensional results on each component. Production benefits: predictable tool life and process stability Stable cutting edges and controlled chip flow contribute directly to process reliability. The grade and geometry combination helps maintain a stable cutting edge, which reduces scatter in cycle times and decreases the risk of scrap. For production environments this translates into higher overall equipment effectiveness: fewer machine stoppages, improved first‑pass yield and lower indirect costs. From a cost perspective, predictable tool life enables better tool‑change planning and inventory management, strengthening both throughput and economic efficiency. Application guidance and integration into tool systems Designed as an indexable milling insert, the ADMT120408R‑F56 series integrates into standard cutter bodies compatible with Parallelogram 85° inserts. The grade is intended for ISO material groups M (stainless steels) and S (heat‑resistant superalloys / titanium), and the F56 chipbreaker supports operations where consistent chip segmentation is required. For selection, compare insert size, clamping type and corner radius with existing toolholders. If further machining data or cutting parameter recommendations are required, Metav Werkzeuge can provide application‑specific guidance to ensure optimal integration and performance. Contact Metav Werkzeuge for application advice, process recommendations or a tailored quote for Walter Tools ADMT120408R-F56 WSM35G inserts — phone +49 2822 7131930, eMail info@metav-werkzeuge.com Technical Data Article number: ADMT120408R-F56-WSM35G-WALTER Label: Fräswendeschneidplatte ADMT120408R-F56 WSM35G Walter Tools Manufacturer: Walter Tools Product type: Indexable milling insert Grade: WSM35G Series: Tiger‑tec Gold Key dimensions Free cutting angle: 15° Corner radius: 0.8 mm Insert size: 12 Thickness code: 04 Special features Parallelogram 85° insert geometry Chipbreaker: F56 Coated carbide grade (Tiger‑tec Gold) Material suitability: S / M Tolerance class: M FAQ What materials is this insert designed for? The ADMT120408R‑F56 WSM35G insert is optimised for ISO groups M and S — primarily stainless steels and heat‑resistant superalloys/titanium. How does the Tiger‑tec Gold coating help performance? The Tiger‑tec Gold coating on the WSM35G grade increases heat resistance and reduces adhesion, which supports stable chip formation and extends edge life during difficult cuts. Which chipbreaker is fitted and what benefit does it provide? This insert uses the F56 chipbreaker, which promotes consistent chip segmentation and evacuation, improving surface finish and reducing the risk of built‑up edge. Is the Parallelogram 85° geometry suitable for roughing and finishing? The Parallelogram 85° shape provides a versatile compromise between cutting engagement and edge strength, making it suitable for a range of operations when the correct cutting data are applied. How should the 0.8 mm corner radius be considered in process planning? The 0.8 mm corner radius strengthens the cutting edge for durable performance while still allowing acceptable surface quality; choose radius size based on the required edge strength and finish. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names remain the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The item offered is original factory‑new goods of the manufacturer.
ADMT120408R-F56 WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of the WSM45X coated carbide grade and the F56 chipbreaker for secure chip control and reliable cutting in stainless steel and heat-resistant alloys; this combination supports stable production and longer tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. ADMT120408R-F56 WSM45X indexable milling insert – coated carbide for stainless steel and superalloys | Walter Tools ADMT120408R-F56 WSM45X is an indexable milling insert engineered for high thermal and mechanical stress applications, ideal for machining stainless steel and heat-resistant superalloys where chip control and edge stability are critical. Coated carbide grade WSM45X Optimised F56 chipbreaker Parallelogram 85° insert form 15° relief angle, 0.8 mm radius Consistent performance for demanding materials The WSM45X grade is a coated carbide specifically developed for difficult-to-machine materials. In practice, the grade promotes stable chip formation when machining stainless steel and heat-resistant superalloys, which are prone to work hardening and high cutting temperatures. The insert’s substrate and coating combination reduces the tendency for built-up edge, extending effective cutting life and lowering process variability. For shops aiming to increase throughput without compromising surface quality, this insert offers a reliable foundation for consistent results. Geometry that enhances cutting stability and surface finish The parallelogram 85° form and F56 chipbreaker are designed to work together to manage chip flow and cutting forces. The 15° relief angle reduces friction behind the cutting edge, while the 0.8 mm corner radius balances edge strength and accessible corner regrinding. These geometrical choices translate into fewer interruptions for de-burring and a predictable workpiece finish, making the insert suitable for production environments where repeatability and reduced secondary operations matter. Technical users will appreciate the clear link between geometry and reduced tool-induced vibration. Practical application and process advantages As an indexable insert from Walter Tools, this item supports fast replacement and minimal downtime in milling operations. The F56 chipbreaker helps break chips into manageable lengths, which benefits automated part handling and chip evacuation. Where high cutting temperatures and poor thermal conductivity of the workpiece present challenges, the coated grade contributes to process security by protecting the cutting edge against thermal degradation. For operations focused on lean manufacturing, this results in fewer tool changes and steadier cycle times. For machining stainless steel and superalloys with Walter Tools inserts, contact Metav Werkzeuge for supply and technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: ADMT120408R-F56-WSM45X-WALTER Designation: ADMT120408R-F56 ISO designation: ADMT120408R-F56 WSM45X Manufacturer: Walter Tools Measurements / Core data Insert size: 12 Thickness: 04 Relief angle: 15° Corner radius: 0.8 mm Insert form: Parallelogramm 85° Chipbreaker: F56 Grade: WSM45X Features / Applications Coated carbide grade WSM45X Suitable for stainless steel (ISO group M) Suitable for heat-resistant superalloys and titanium (ISO group S) Tolerance class: M Series: Walter Schneidstoffsorte - Serie offen Execution: T FAQ Which materials is this insert intended for? The ADMT120408R-F56 WSM45X insert from Walter Tools is designed primarily for stainless steel and heat-resistant superalloys (ISO groups M and S), offering improved chip control and thermal resistance. What are the key geometric features that affect performance? The parallelogram 85° form, 15° relief angle and 0.8 mm corner radius on the ADMT120408R-F56 provide a balance of edge strength and accessibility, supporting stable cutting and good surface finish. How does the F56 chipbreaker benefit production? The F56 chipbreaker on this Walter Tools insert breaks chips into manageable segments, aiding chip evacuation and reducing the risk of entanglement in automated milling setups. Is this insert suitable for high-temperature applications? Yes; the WSM45X coated carbide grade in the ADMT120408R-F56 is formulated to withstand elevated cutting temperatures typical of stainless steel and superalloy machining, helping maintain process security. Can this insert be indexed to reduce downtime? The ADMT120408R-F56 is an indexable milling insert by Walter Tools, enabling quick indexation or replacement to keep machine uptime high and changeover times short. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
ADMT120408R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the Tiger‑tec Gold PVD coating combined with the WSP45G grade for robust chip control and extended tool life; the parallelogram 85° form with a 0.8 mm corner radius and 15° relief angle delivers stable milling performance. Order the insert directly via Metav Werkzeuge or request guidance from our consultants for application optimisation. ADMT120408R-F56 WSP45G milling insert (Parallelogram 85°, 0.8 mm radius) – Walter Tools ADMT120408R-F56 WSP45G is a precision milling insert developed for productive face and profile milling in a wide range of materials Tiger‑tec Gold PVD coating for longer service life Versatile for Stahl, rostfreier Stahl and Titan (P/M/S) Parallelogram 85° form, 0.8 mm corner radius 15° relief angle for stable cutting action Maximum process reliability through coated carbide technology The combination of the Tiger‑tec Gold coating and the WSP45G carbide grade focuses on consistent performance under typical milling stresses. The multilayer PVD coating improves wear resistance and reduces friction at the tool–workpiece interface, which supports stable cutting conditions and lengthens tool life. In practical terms, the coated grade reduces the frequency of insert changes and contributes to predictable tool costs per component — an essential factor for high‑volume and continuous production environments. Geometry engineered for chip control and surface quality The parallelogram 85° insert form and the 0.8 mm corner radius are designed to balance strength and accessibility in milling applications. Combined with the F56 chipbreaker and a 15° relief angle, the geometry promotes controlled chip formation and evacuation, which minimises recutting and heat build‑up. For operators less familiar with chipbreaker function: the profile channels chips away from the cutting zone to prevent build‑up on the cutting edge, resulting in improved surface finish and reduced risk of built‑up edge on challenging workpieces such as Stahl, rostfreier Stahl or heat‑resistant alloys. Predictable performance and economic machining Tolerance class M and the standard thickness designation ensure repeatable seating and clamping in compatible toolholders, maintaining dimensional stability across tool changes. The insert size and thickness coding support straightforward tool selection and inventory management for toolrooms. Walter Tools’ grade selection aims to provide cost‑effective productivity: stable edge life decreases downtime, and the insert’s versatility across P/M/S groups simplifies tooling lists. For shops seeking to reduce process variability while maintaining component quality, this approach supports efficient cycle times and consistent results. For robust, versatile milling performance choose the Walter Tools ADMT120408R‑F56 WSP45G — contact Metav Werkzeuge for tailored cutting data and application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ADMT120408R-F56-WSP45G-WALTER Product designation: ADMT120408R-F56 WSP45G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WSP45G Facts Relief angle: 15° Corner radius: 0.8 mm Insert form: Parallelogram 85° Insert size: 12 Thickness code: 04 Tolerance class: M Special features Coating: Tiger‑tec Gold (PVD) Chipbreaker: F56 Execution: T Material groups: P / M / S (suitable for Stahl, rostfreier Stahl, superalloys/Titan) ISO designation: ADMT120408R-F56 WSP45G FAQ What materials is this insert suitable for? The ADMT120408R‑F56 WSP45G is formulated for use across the P/M/S groups and is suitable for machining Stahl, rostfreier Stahl and heat‑resistant alloys such as Titan, as indicated by the WSP45G grade. How does the F56 chipbreaker influence milling performance? The F56 chipbreaker on the ADMT120408R‑F56 promotes controlled chip formation and efficient evacuation, reducing the risk of recutting and improving surface finish in interrupted or continuous milling operations. What advantages does the Tiger‑tec Gold coating provide? Tiger‑tec Gold enhances wear resistance and thermal stability for the WSP45G grade, helping to extend insert life and maintain consistent cutting-edge behaviour across longer tool cycles. Is the insert compatible with standard toolholders? The ADMT120408R‑F56 follows common ISO insert sizing and the tolerance class M, ensuring reliable seating and clamping in appropriately specified toolholders designed for parallelogram 85° inserts. What is the purpose of the 0.8 mm corner radius? A 0.8 mm corner radius on this milling insert offers a compromise between edge strength and achievable surface finish, providing robustness against edge chipping while maintaining acceptable form accuracy. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT120408R-G56 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WKP35G grade for reliable, long-lasting performance in Stahl and cast iron; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. ADMT120408R-G56 WKP35G indexable milling insert — Tiger·tec Gold for Stahl and cast iron | Walter Tools ADMT120408R-G56 WKP35G is an indexable milling insert engineered for high-productivity machining in general industry, optimised for operations on Stahl and cast iron. Tiger·tec Gold coating technology Optimised chipformer G56 for stable chips Positive geometry with 15° relief angle Parallelogram 85° form for robust engagement Grade WKP35G: coated carbide for long life Boosted process security and throughput with coated carbide The combination of the Tiger·tec Gold coating and the WKP35G cutting grade provides a predictable wear pattern and extended tool life, which translates directly into higher uptime on the machine. Coated carbide is designed to withstand the thermal and mechanical demands of medium‑ to high‑speed milling, so the insert keeps edge integrity longer and reduces unscheduled tool changes. For production environments seeking consistent cycle times, this insert contributes to a measurable improvement in process reliability and overall equipment efficiency. Stable chip control for consistent surface quality The integrated chipformer G56 is shaped to break and evacuate chips reliably when machining common industrial materials. Stable chip formation reduces the likelihood of re-cutting and surface damage, which helps maintain a consistent finish with fewer rework steps. The 0.8 mm corner radius and the positive 15° relief angle together moderate cutting forces and support predictable engagement, especially in interrupted cuts or semi‑finishing passes, providing practitioners with a balanced combination of edge strength and surface integrity. Geometry and form that support flexibility in operations The parallelogram 85° insert form provides a secure clamping interface and favourable cutting directionality for many milling strategies, from shoulder cuts to helical entry. The modest corner radius offers a compromise between robustness and precision, while the plate thickness code and M tolerance class ensure dimensional consistency across batches. This geometry is particularly suited to tools where versatile cutting orientations are required, enabling shops to standardise on a single insert geometry for multiple tasks and thus simplify tool inventory. Application guidance and handling for predictable results Designed for use on ISO material groups P and K (Stahl and cast iron), the insert performs well in both continuous and interrupted milling when paired with appropriate carbide bodies and clamping systems. While the insert is optimised for common production metals, cutting data should be selected according to the specific machine, workpiece rigidity and coolant strategy. For precise speeds and feeds or for guidance on toolholder compatibility, Metav Werkzeuge’s consultants can provide tailored recommendations to translate the insert’s capabilities into reliable cutting parameters. For product enquiries or to specify the ADMT120408R‑G56 WKP35G insert for a particular application, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our technical team will advise on selection and availability Technical data Article number: ADMT120408R-G56-WKP35G-WALTER SKU: ADMT120408R-G56-WKP35G-WALTER Series: Tiger-tec Gold Grade: WKP35G Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 0.8 mm Plate size: 12 Plate thickness: 04 Plate form: Parallelogram 85° Tolerance class: M Special features Material compatibility: P / K (Stahl, cast iron) Chipbreaker: G56 Cutting material: coated carbide (Tiger·tec Gold) Execution code: T FAQ What materials is this insert suited for? The ADMT120408R‑G56 WKP35G indexable milling insert from Walter Tools is formulated for ISO groups P and K, meaning it is suitable for machining Stahl and cast iron. What benefit does the Tiger·tec Gold series provide? Tiger·tec Gold coating on the WKP35G grade enhances thermal resistance and wear behaviour, extending edge life and supporting stable cutting in production milling. Is the ADMT120408R‑G56 suitable for interrupted cuts? Yes; the positive relief angle and the 0.8 mm corner radius give the insert a good balance of toughness and cutting precision, making it acceptable for many interrupted‑cut scenarios when mounted correctly. How does the G56 chipformer affect performance? The G56 chipformer is designed to produce short, controlled chips in typical conditions for Stahl and cast iron, reducing the risk of chip entanglement and improving surface consistency. Where can specific speeds and feeds be obtained? For machine‑ and application‑specific cutting data for the ADMT120408R‑G56 WKP35G insert, consult Metav Werkzeuge’s technical team who can recommend speeds, feeds and coolant strategies. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT120408R-G56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and an optimised G56 chipformer for stable chip control and extended tool life; order the insert directly via Metav Werkzeuge or consult our specialists for process optimisation. ADMT120408R-G56 / ADMT120408R-G56 WKP35S (WKP35S) milling indexable insert for steel and cast iron — Walter Tools (15° relief, 0.8 mm corner radius) A ADMT120408R-G56 WKP35S insert engineered for productive milling in ISO P and K applications, offering robust edge stability and consistent chip formation for industrial metalworking. Tiger-tec Silver coating Optimised G56 chipformer 15° relief angle 0.8 mm corner radius Boosted productivity through advanced coating and grade The combination of the Tiger·tec Silver coating and the WKP35S grade is designed to deliver higher wear resistance and reliable performance in mixed production environments. The coating technology reduces built-up edge and improves thermal stability, which directly translates into longer tool life and fewer index changes. For machining steel and cast iron, this translates into reduced downtime and a more predictable process window, supporting tighter production schedules and improved overall efficiency. Consistent chip control and improved process reliability The G56 chipformer is engineered to create short, controllable chips under the typical cutting conditions of P- and K-group materials. This targeted chip control reduces the risk of entanglement and workpiece damage, allowing for smoother automatic handling and easier post-process cleaning. Coupled with the 15° relief and Parallelogram 85° geometry, the insert provides a secure cutting edge with predictable force distribution, which benefits toolholders and machine spindle life through reduced vibration. Geometry designed for strength and surface quality With a 0.8 mm corner radius, the insert balances edge strength and surface finish, making it suitable for a range of slotting and shoulder milling tasks where robustness is required without compromising the machined surface. The parallelogram form gives a stable seating and enables advantageous cutting orientations for a variety of cutter bodies, while the tolerance class M supports consistent interchangeability. The result is a reliable milling solution that supports high-feed strategies and maintains dimensional accuracy across batches. For process advice or to secure the ADMT120408R-G56 WKP35S insert from Walter Tools, contact Metav Werkzeuge for tailored recommendations and ordering via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: ADMT120408R-G56-WKP35S-WALTER Name: ADMT120408R-G56 WKP35S Product type: milling indexable insert Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 0.8 Plate form: Parallelogram 85° Plate size: 12 Plate thickness: 04 Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WKP35S (coated carbide) Chipformer: G56 Material suitability: Steel (P), Cast iron (K) Series: Tiger-tec Silver FAQ What materials is this insert suitable for? This insert is suitable for machining steel and cast iron as indicated by the WKP35S grade and the Tiger·tec Silver series. How does the G56 chipformer improve machining? The G56 chipformer provides controlled, short chips, enhancing process reliability and reducing risk of chip-related interruptions when milling steel and cast iron. What are the key geometric advantages of this insert? The parallelogram 85° shape with a 0.8 mm corner radius and 15° relief offers enhanced edge strength and stable seating for consistent cutting performance. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
ADMT120408R-G56 WSM35G WSM35G Wendeplatten - Walter Tools
The combination of a Tiger·tec Gold coating and the WSM35G grade delivers stable cutting edges and secure chip control for demanding materials; order the insert via Metav Werkzeuge or request application advice from Metav Werkzeuge consultants for optimal integration into existing processes. ADMT120408R-G56 WSM35G milling insert (Tiger·tec Gold) by Walter Tools — for stainless steels & superalloys The ADMT120408R-G56 WSM35G is a Tiger·tec Gold‑coated milling insert engineered for robust performance in the machining of stainless steels and heat‑resistant superalloys, offering secure chip formation and reliable edge life. Tiger·tec Gold coating for thermal stability Optimised G56 chipformer for secure chip control 15° relief angle for robust cutting performance Parallelogram 85° shape with 0.8 mm corner radius Consistent edge life through advanced coating technology The combination of the Tiger·tec Gold coating and the WSM35G cemented‑carbide grade is designed to resist thermal and mechanical loads encountered when machining demanding alloys. The multi‑layer coating provides a thermal barrier and improved surface hardness, which together reduce flank wear and delay crater formation under elevated cutting temperatures. This means fewer tool changes and a more predictable tool‑life curve, contributing directly to process stability and reduced machine downtime. Where high heat generation is an issue, the coated grade supports a consistent cutting edge and helps maintain dimensional accuracy of the workpiece. Geometry and chip control for safer machining The insert’s G56 chipformer and parallelogram 85° geometry improve chip breaking and evacuation in interrupted and continuous milling operations. The 15° relief angle reduces rubbing at the margin while the 0.8 mm corner radius increases edge strength, producing a favourable balance between surface finish and insert durability. These geometry choices are particularly beneficial during heavier cuts or when axial depths vary, as they reduce the risk of built‑up edge and stabilise cutting forces. Clear chip control lowers the chance of recutting and helps maintain consistent machining cycles. Tailored for stainless steels and high‑temperature alloys This grade is assigned to the ISO groups M and S, indicating suitability for stainless steels and heat‑resistant superalloys/titanium respectively. Such materials are prone to work hardening, poor thermal conductivity and sticky chip formation; the WSM35G grade compensates by promoting stable chip formation and maintaining a sharp, wear‑resistant edge. In practice, this enables more reliable machining of components that demand tight tolerances and good surface integrity. Where geometry permits, the insert supports operations that prioritise tool life and reproducible component quality. Practical benefits and selection guidance for production When integrating the insert into production, the main advantages are process reliability, reduced unplanned interventions and consistent surface quality, particularly on demanding alloys. Selection should consider machine rigidity, cutting parameters and the intended cut type: the insert is suited to medium to heavy milling, where the combination of the Tiger·tec Gold coating and robust chipformer delivers measurable uptime benefits. For specification matching or to confirm optimal cutting data, technical consultation with Metav Werkzeuge is recommended to align insert choice with machining strategy and production goals. Contact Metav Werkzeuge for tailored cutting data and application recommendations for Walter Tools Tiger·tec Gold inserts, or arrange a material‑specific consultation via Metav Werkzeuge. Technical data Article number: ADMT120408R-G56-WSM35G-WALTER Designation: ADMT120408R-G56 WSM35G Manufacturer: Walter Tools Facts Size: 12 Thickness: 04 Relief angle: 15° Corner radius: 0.8 mm Tolerance class: M Special features Coating/series: Tiger·tec Gold Grade: WSM35G (coated cemented carbide) Chipformer: G56 Geometry: Parallelogram 85° Suitable for: stainless steels (M), superalloys & titanium (S) FAQ What materials is this insert intended for? The ADMT120408R-G56 WSM35G insert by Walter Tools is intended for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), as indicated by the grade and series designation. How does the Tiger·tec Gold coating help in practice? The Tiger·tec Gold coating on the WSM35G grade improves thermal resistance and surface hardness, which extends edge life during high‑temperature cutting and reduces wear when machining challenging alloys. What is the effect of the G56 chipformer? The G56 chipformer is optimised for predictable chip breaking and evacuation, reducing the risk of built‑up edge and enabling safer, more stable milling cycles in both continuous and interrupted cuts. Which operations suit this geometry best? Parallelogram 85° geometry combined with a 15° relief angle and 0.8 mm corner radius is well suited to medium and heavy milling operations where edge strength and chip control are priorities. Is this insert appropriate for finishing cuts on stainless steel? Yes; the insert’s coating and edge geometry support improved surface quality while maintaining tool life, making it a viable option for finishing operations depending on machine and process parameters. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is part of the Sandvik group and is a leading manufacturer of precision cutting tools. Protected trademarks and product names are the property of their respective owners. Mark names and registered trademarks are mentioned exclusively for explanatory purposes; there is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
ADMT120408R-G56 WSP45G WSP45G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating, stable G56 chipbreaker, and a parallelogram 85° form delivers high productivity and consistent surface quality; order the ADMT120408R-G56 WSP45G milling insert directly via Metav Werkzeuge or consult the technical team for application advice. Fräswendeschneidplatte ADMT120408R-G56 WSP45G – indexable milling insert with Tiger·tec Gold coating by Walter Tools, for steel, stainless steel and heat-resistant alloys ADMT120408R-G56 WSP45G is an indexable milling insert designed for versatile milling of steels, stainless steel and heat-resistant superalloys, offering reliable chip control and edge stability Tiger·tec Gold PVD-coated carbide grade WSP45G For steel, stainless steel and heat-resistant alloys Parallelogram 85° form with 15° clearance Productivity through a robust coating and stable chip control The combination of Tiger·tec Gold PVD technology and a WSP45G coated carbide delivers measurable productivity gains in milling operations. The coating improves wear resistance and thermal stability, which results in longer tool life and fewer indexings. The G56 chipbreaker is engineered to ensure consistent chip control, reducing downtime caused by poor chip evacuation and improving cycle-time reliability. For production environments focused on efficiency, this insert supports higher process stability and more reproducible results. Precise geometry for secure engagement and surface quality The parallelogram 85° form with a 15° clearance and a 0.8 mm corner radius produces a stable cutting edge and controlled cutting forces during side and face milling. The geometry reduces vibration and spreads the cutting load across the edge, which contributes to improved surface finish and predictable wear behaviour. The insert form is especially suitable for applications requiring accurate axial and radial positioning, where the set geometry helps to maintain dimensional tolerances across repeated operations. Broad material capability explained simply This insert is rated for the ISO material groups P / M / S, meaning suitability for unalloyed and alloyed steels, stainless steel, and heat-resistant superalloys or titanium. The WSP45G grade is a tough, versatile PVD-coated carbide that copes well with the heat and adhesion tendencies typical of these materials. In practice, this means fewer tool changes across mixed-component batches and improved throughput for shops that machine a range of demanding workpiece materials. Practical advantages for workshop integration The ADMT120408R-G56 WSP45G insert integrates into common milling tool holders as an indexable insert, simplifying tool inventory and replacement procedures. Consistent manufacturing tolerances (tolerance class M) ensure repeatable seating and minimal rework during re-indexing. Where process reproducibility and predictable maintenance intervals are essential, the insert’s design helps to reduce setup variability and increase overall machine uptime. For technical guidance on integrating the Walter Tools ADMT120408R-G56 WSP45G into specific machining processes or to request a quote, contact Metav Werkzeuge for expert assistance and ordering. Technical Data SKU: ADMT120408R-G56-WSP45G-WALTER Product type: Fräswendeschneidplatte (indexable milling insert) Series: Tiger·tec Gold Grade: WSP45G Manufacturer: Walter Tools Facts Clearance angle: 15° Corner radius: 0.8 mm Insert size: 12 Thickness: 04 Tolerance class: M Special features Parallelogram 85° form Chipbreaker: G56 Material groups: P / M / S Execution: T ISO designation: ADMT120408R-G56 WSP45G Base designation without grade: ADMT120408R-G56 FAQ What workpiece materials can this insert machine effectively? The ADMT120408R-G56 WSP45G insert is suitable for machining steels, stainless steel and heat-resistant superalloys/titanium (ISO groups P / M / S), providing stable cutting performance across these materials. How does the Tiger·tec Gold coating benefit milling applications? The Tiger·tec Gold PVD coating on the ADMT120408R-G56 WSP45G improves wear resistance and thermal stability, which extends tool life and supports consistent surface quality in demanding milling cycles. What is the advantage of the parallelogram 85° form? The parallelogram 85° form offers secure seating and optimised cutting geometry for side and face milling, reducing vibration and improving reproducibility of the tool path when using the ADMT120408R-G56 WSP45G. Is the insert suitable for high-speed milling operations? The WSP45G grade and the insert geometry are designed for productive milling; recommended cutting parameters depend on the workpiece material and machine capabilities, and the ADMT120408R-G56 WSP45G performs well under appropriately adjusted high-speed conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanation. There is no affiliation between our company and the named manufacturers. The offered item is original, factory-new merchandise of the manufacturer Walter Tools.
ADMT120412R-F56 WKP35G Wendeplatten - Walter Tools
High wear resistance from the Tiger·tec Gold coating and the WKP35G grade, combined with a robust 1.2 mm corner radius and parallelogram 85° geometry, delivers stable, productive machining of steel and cast iron; order directly via Metav Werkzeuge or consult our specialists for application advice. ADMT120412R-F56 WKP35G milling indexable insert — Tiger·tec Gold for steel & cast iron (Walter Tools) The ADMT120412R-F56 WKP35G is a parallelogram 85° milling insert engineered for reliable, wear-resistant cutting in steel and cast iron applications. Tiger·tec Gold coated carbide grade WKP35G Suitable for steel and cast iron machining Parallelogram 85° cutting geometry 15° clearance angle for stable cutting Corner radius 1.2 mm for robust edges Engineered for consistent material removal and chip control The combination of the Tiger·tec Gold coating and the WKP35G carbide grade delivers enhanced resistance to abrasive wear and improved thermal stability in demanding milling operations. The integrated F56 chipbreaker is tuned to promote predictable chip formation when machining ISO groups P and K, which means more consistent cutting forces and reduced risk of unexpected tool interruptions. The parallelogram 85° geometry provides a balanced cutting position that supports stable engagement and efficient evacuation of chips, helping to maintain surface quality and process reliability over longer tool lives. Increased productivity through reproducible edge stability A 1.2 mm corner radius and a 15° clearance angle give the insert a robust cutting edge that tolerates higher cutting loads and shock conditions, translating into fewer indexings and more productive machining cycles. The tolerance class M and execution code T ensure repeatable seating and predictable performance in standard pocket clamps, which supports efficient tool management and reduced setup variability. For production environments where predictable tool life and process repeatability are valued, this geometry and grade combination contributes directly to improved machine uptime and lower overall machining costs. Clear selection and application benefits for workshop and production planning Specified as a coated carbide insert in the Tiger·tec Gold series, this item suits a wide range of general-purpose milling tasks in steel and cast iron, from light profiling to more demanding peripheral milling where stability and wear resistance are required. The insert’s design supports straightforward inventory allocation: one grade for multiple P and K applications, simplifying tool choice and replenishment. For tailored cutting data or to match the insert to a particular holder or machining strategy, technical documentation from the manufacturer and measured process feedback should be consulted to achieve optimal results. Contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored cutting data and application support for this Walter Tools Tiger·tec Gold insert Technical Data SKU: ADMT120412R-F56-WKP35G-WALTER Designation: ADMT120412R-F56 WKP35G Type: Milling indexable insert Series: Tiger·tec Gold Grade: WKP35G Chipbreaker: F56 Geometry: Parallelogram 85° Execution: T Tolerance class: M Core data Corner radius: 1.2 mm Clearance angle: 15° Insert size: 12 Thickness code: 04 Special features Material group: P / K (steel and cast iron) Suitable for: steel Suitable for: cast iron Series technology: Tiger·tec Gold (coated carbide) Manufacturer: Walter Tools FAQ Which workpiece materials is this insert designed for? The ADMT120412R-F56 WKP35G insert from Walter Tools is designed for ISO groups P and K, specifically for machining steel and cast iron. What are the main benefits of the WKP35G grade and Tiger·tec Gold series? The WKP35G grade combined with Tiger·tec Gold coating offers high abrasion resistance and thermal stability, improving tool life and maintaining edge integrity in challenging steel and cast iron milling. How does the insert geometry contribute to process stability? The parallelogram 85° geometry and 15° clearance angle provide balanced engagement and predictable chip flow, while the 1.2 mm corner radius reduces edge chipping under higher loads. For which milling tasks is this chipbreaker (F56) best suited? The F56 chipbreaker supports controlled chip formation across a variety of milling operations in P and K materials, promoting consistent cutting forces and surface finish. What should be considered when choosing this insert for production? Consider machine rigidity, clamping method, and expected cutting conditions; the ADMT120412R-F56 WKP35G is intended where robust edge stability and predictable wear behaviour are priorities. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned only for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is original, factory-new goods from the manufacturer Walter Tools. The Walter brand is part of the Walter AG / Walter Tools product portfolio and is referenced here solely to describe the origin and specification of the product.
ADMT120412R-F56 WKP35S Wendeplatten - Walter Tools
The combination of a WKP35S wear-resistant grade and Tiger·tec Silver coating ensures reliable performance on steel and cast iron, reducing downtime and tool change frequency; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. ADMT120412R-F56 WKP35S — Indexable milling insert, F56 chipbreaker, Walter Tools The ADMT120412R-F56 WKP35S is an indexable milling insert designed for productive machining of steel and cast iron, featuring a 15° relief angle and a robust parallelogram 85° form. Tiger·tec Silver coating for long tool life WKP35S grade for steel and cast iron 15° relief angle for stable cutting Parallelogram 85° form with 1.2 mm corner Durable coating for extended service life and consistent results The Tiger·tec Silver coating combined with the WKP35S substrate provides a balance of wear resistance and toughness that is engineered for the thermal and mechanical stresses typical when machining steel and cast iron. This coated carbide construction reduces abrasive and adhesive wear, which in turn extends tool life and supports reproducible component quality. The result is a measurable reduction in tool changes and improved process stability, particularly in medium- to high-volume production where predictable tool performance is essential. Geometry tuned for secure clamping and controlled chip formation With a 15° relief angle and a parallelogram 85° form, the insert delivers secure seating and effective engagement for radial and axial milling operations; the 1.2 mm corner radius increases edge strength for interrupted cuts and contributes to a consistent surface finish. The integrated F56 chipbreaker is designed to fragment and evacuate chips efficiently when machining both continuous and brittle chip formers, which helps to maintain stable cutting forces and reduces the risk of re-cutting chips in the work zone. These geometric choices translate into improved tool life and a more predictable machining cycle. Application focus and economical advantages in production Specified for groups P and K according to ISO 513, the grade is intended for unalloyed and alloyed steel as well as cast iron, making the insert a versatile option across mixed production environments. The coated cutting material is suited to standard machining feeds and speeds typical for catalogue geometries, offering a practical compromise between performance and cost-efficiency. Using this insert can lead to higher machine uptime and lower per-part tooling costs due to fewer changes and stable edge behaviour under common shop conditions. Contact Metav Werkzeuge for tailored application guidance and to secure Walter Tools ADMT120412R-F56 WKP35S inserts for reliable, productive milling Technical data SKU: ADMT120412R-F56-WKP35S-WALTER Product type: Indexable milling insert Brand: Walter Tools Series: Tiger·tec Silver Grade: WKP35S Facts Relief angle: 15° Corner radius: 1.2 mm Plate size: 12 mm Thickness: 04 Form angle: Parallelogram 85° Special features Chipbreaker: F56 Applicable materials: Steel (P), Cast iron (K) Execution: T Tolerance class: M Designation: ADMT120412R-F56 ISO designation: ADMT120412R-F56 WKP35S FAQ What materials are suitable for this insert? The ADMT120412R-F56 WKP35S insert by Walter Tools is suitable for machining steel (P) and cast iron (K) as indicated by its grade and series. What benefits does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WKP35S grade improves wear resistance and thermal stability, extending service life and supporting consistent results in milling operations. How does the parallelogram 85° form affect machining? The parallelogram 85° shape provides secure seating and favourable cutting angles for effective engagement during radial and axial milling, improving stability and surface finish. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
ADMT120412R-F56 WSM35G T Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold wear resistance, the WSM35G coated-carbide grade and optimised F56 chip control for secure machining of stainless steel and heat‑resistant superalloys; order directly via Metav Werkzeuge or request tailored advice from our consultants. ADMT120412R-F56 WSM35G milling insert — Tiger·tec Gold, for stainless steel & superalloys | Walter Tools The ADMT120412R‑F56 WSM35G is a parallelogram 85° milling insert engineered for high‑temperature alloy and stainless steel operations, offering robust edge stability and consistent chip formation. Tiger·tec Gold coated carbide grade WSM35G Optimised chip control with F56 chipbreaker Parallelogram 85° form with 15° free angle Suitable for stainless steel and superalloys Longer tool life through advanced coating and grade selection The Tiger·tec Gold coating paired with the WSM35G grade is designed to resist abrasive wear and thermal load, which translates into extended tool life and fewer index changes during production. Coated carbide ensures heat resistance and edge stability when machining demanding materials such as stainless steel and nickel‑based alloys; this reduces the frequency of interruptions and supports steady cycle times. Less wear means lower tool consumption and improved cost efficiency over extended production runs. Predictable chip flow and fewer process interruptions A dedicated F56 chipbreaker and the parallelogram 85° insert form deliver controlled chip detachment and predictable evacuation, which is essential for continuous milling of heat‑resistant alloys. The geometry, combined with a 15° free angle and a 1.2 mm corner radius, provides a balance between shear strength and surface integrity. Process stability is enhanced, resulting in reduced built‑up edge formation and more consistent surface finishes, thereby supporting higher machine utilisation and reliable output quality. Versatility across roughing and finishing tasks With tolerance class M and the compact size 12 format, the insert is adaptable to a range of machining strategies from aggressive material removal to fine finishing passes depending on toolholder and cutter configuration. The thickness 04 and the insert’s design allow secure clamping and repeatable positioning, so machining programmes remain stable and reproducible. The result is a flexible solution that supports mixed production environments where different grades and materials must be processed with consistent results. Practical benefits for workshop workflows As an indexable milling plate from Walter Tools, this insert simplifies tool management: quick indexing reduces downtime and the standard form factor integrates seamlessly into existing cutter systems. The combination of a stable cutting edge and effective chip control improves operator confidence and contributes to predictable planning of tool change intervals. For complex components or serial production in aerospace, energy or medical sectors, the insert supports reproducible quality and process security. Contact Metav Werkzeuge for application advice and to secure a supply of Walter Tools ADMT120412R‑F56 WSM35G inserts for challenging stainless steel and superalloy machining Technical Data SKU: ADMT120412R-F56-WSM35G-WALTER Article designation: ADMT120412R-F56 WSM35G Product type: Fräswendeschneidplatte / milling insert Manufacturer: Walter Tools Facts Free angle: 15° Corner radius: 1.2 Insert size: 12 Thickness: 04 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WSM35G Chipbreaker: F56 Plate form: Parallelogram 85° Material application: S / M Execution: T FAQ What materials is this insert best suited for? The ADMT120412R‑F56 WSM35G insert is intended for stainless steel and heat‑resistant superalloys (S / M), offering enhanced edge life and thermal stability for these groups. How does the F56 chipbreaker improve machining? The F56 chipbreaker on the ADMT120412R‑F56 promotes controlled chip formation and evacuation, which helps to maintain stable cutting conditions and reduces the risk of built‑up edge when machining difficult materials. Can the insert be used for both roughing and finishing? Yes, the combination of the parallelogram 85° form, tolerance class M and the insert geometry allows flexible use from heavier roughing to finishing passes when matched with the appropriate cutter and process parameters. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation and identification purposes; no affiliation with Metav Werkzeuge is implied. The offered article is an original, factory‑new product of the manufacturer.
ADMT120412R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Reliable milling performance with the Tiger‑tec Gold coating and the versatile WSP45G grade delivers stable chip formation and long tool life, especially in demanding steel and stainless steel applications. The parallelogram 85° geometry combined with a 15° clearance and 1.2 mm corner radius provides secure clamping and improved edge strength. Order the ADMT120412R-F56 WSP45G directly via Metav Werkzeuge or consult our specialists for application advice. ADMT120412R-F56 WSP45G milling insert, Parallelogram 85°, Tiger‑tec Gold (Walter Tools) The ADMT120412R-F56 WSP45G is a versatile milling insert designed for finishing and general milling of steel, stainless steel and heat‑resistant alloys Tiger‑tec Gold coating for extended tool life Suitable for Steel, Stainless and Superalloys Parallelogram 85° shape for secure clamping 15° clearance angle for stable cutting 1.2 mm corner radius for improved edge strength Durable coating and material adaptability for reliable production The combination of the Tiger‑tec Gold coating and the WSP45G grade creates a PVD‑coated cutting surface engineered for durability and predictable wear. This specification is tailored to handle the thermal loads and chip behaviour typical of machining steel and stainless steel, while also offering resilience for tougher superalloys and titanium‑based materials. The result is consistent tool life and fewer unexpected tool changes, supporting a smooth production flow and reduced downtime. Geometry that improves stability and workpiece quality The parallelogram 85° insert form gives a secure seat in compatible toolholders and optimises the clamping force distribution for milling operations. A 15° clearance reduces rubbing at the flank, while the 1.2 mm corner radius increases edge strength and helps achieve a more uniform surface finish. The integrated chipbreaker F56 assists in controlled chip formation, lowering the risk of built‑up edge and improving repeatable dimensional results on the workpiece. Practical benefits for productivity and process security Designed as a general‑purpose milling solution, this insert supports a wide range of applications from finishing passes to medium‑duty face milling. The versatile grade minimises the need for multiple insert types across different materials, which simplifies inventory and contributes to cost efficiency in high‑mix production environments. For process planning, the insert’s balanced geometry and coating can help maintain cycle times and improve overall process stability when used in appropriately rated holders and cutting parameters. For additional machining data or application recommendations, Metav Werkzeuge provides tailored consultation and cutting‑tool expertise. Contact Metav Werkzeuge for tailored application support and to request ordering details for the Walter Tools ADMT120412R-F56 WSP45G milling insert Technical data SKU: ADMT120412R-F56-WSP45G-WALTER Article designation: ADMT120412R-F56 WSP45G Product type: Fräswendeschneidplatte / milling insert Series: Tiger‑tec Gold Grade: WSP45G Manufacturer: Walter Tools Facts Insert size: 12 Corner radius: 1.2 mm Clearance angle: 15° Thickness code: 04 Tolerance class: M Special features Coating: Tiger‑tec Gold (PVD) Chipbreaker: F56 Shape: Parallelogram 85° Grade material: P / M / S (Steel / Stainless steel / Superalloys) Execution: T Designation without grade: ADMT120412R-F56 FAQ Is this insert suitable for stainless steel machining? Yes. The ADMT120412R-F56 WSP45G is specified for stainless steel applications and its WSP45G grade is designed to promote secure chip formation and edge stability when machining stainless materials. What does the chipbreaker F56 do? The chipbreaker F56 on the ADMT120412R-F56 WSP45G controls chip shape and evacuation, which helps reduce chip entanglement and supports consistent surface quality during milling. Can this insert be used on heat‑resistant superalloys and titanium? Yes. The WSP45G grade covers the S material group and offers enhanced heat resistance and edge stability for demanding alloys and titanium‑based materials. Which geometric features improve clamping and surface finish? The parallelogram 85° shape combined with a 15° clearance and 1.2 mm corner radius enhances clamping security, reduces vibration and contributes to improved surface finishes in routine milling operations. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. It is an original, factory‑new item of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADMT120416L-F56 WKP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WKP35G grade and a precise parallelogram 85° geometry to achieve consistent chip control and long tool life when machining Stahl and Gusseisen. Order the ADMT120416L-F56 WKP35G directly via Metav Werkzeuge or consult our specialists for application-specific guidance. ADMT120416L-F56 WKP35G milling indexable insert — Parallelogramm 85°, 15° relief (Walter Tools) The ADMT120416L-F56 WKP35G is a parallelogram 85° milling indexable insert designed for productive machining of Stahl (P) and Gusseisen (K), combining a Tiger·tec Gold coated substrate with a tailored chipbreaker for reliable performance. Tiger·tec Gold coating for abrasion resistance Optimised chip control with F56 chipbreaker Parallelogramm 85° geometry for versatile milling 15° relief angle and 1.6 mm corner radius Stable cutting performance thanks to modern coating technology The combination of the Tiger·tec Gold coating and the WKP35G grade yields a coating system optimised for abrasive wear resistance and thermal stability, which translates into longer service life in mixed production environments. The coated cemented carbide construction, described in the series information, is specifically tailored for typical heat development and chip behaviour when machining Stahl and Gusseisen. This reduces flank wear and maintains dimensional accuracy over longer tool life, therefore increasing productivity per insert installed. Better chip control and surface finish through geometry The parallelogram 85° form and the integrated F56 chipbreaker improve chip evacuation and reduce built-up edge formation in interrupted and continuous cuts. With a 15° relief angle and a 1.6 mm corner radius, this geometry balances edge strength and cutting sharpness, enabling stable performance on a wide range of workpiece geometries. For operations that require repeatable surface quality, the geometry minimises vibration and supports consistent cutting conditions across different batch sizes. Application advantages: efficient machining of Stahl and Gusseisen Selected for use on Stahl (P) and Gusseisen (K) according to ISO 513 groupings, the insert addresses the most common industrial machining tasks where a combination of wear resistance and chip control is essential. The WKP35G grade is a coated carbide variant that performs well under the typical thermal and mechanical loads encountered in these materials. Where throughput and reproducible results matter, this insert supports stable cycle times and predictable tool-change intervals, contributing to lower unit costs and improved shop-floor efficiency. Contact Metav Werkzeuge for application advice on using the Tiger·tec Gold WKP35G insert in specific machining scenarios or to request further technical documentation via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: ADMT120416L-F56-WKP35G-WALTER Designation: ADMT120416L-F56 WKP35G Type: Fräswendeschneidplatte Series: Tiger·tec Gold Grade: WKP35G Manufacturer: Walter Tools Facts Corner radius: 1.6 mm Relief angle: 15° Insert size: 12 mm Thickness: 4 mm Tolerance class: M Special features Geometry: Parallelogramm 85° Chipbreaker: F56 Material applicability: Stahl (P) and Gusseisen (K) Execution: T Coating: Tiger·tec Gold (coated cemented carbide) FAQ What materials is this insert suitable for? The ADMT120416L-F56 WKP35G is intended for machining Stahl (P) and Gusseisen (K) as defined by ISO 513 and is optimised accordingly. How does the Tiger·tec Gold coating affect tool life? The Tiger·tec Gold coating on the WKP35G grade improves resistance to abrasive wear and thermal loading, which extends the useful life of the insert in standard production conditions. What advantage does the parallelogram 85° shape provide? The parallelogram 85° geometry allows flexible milling strategies and supports efficient chip flow with the specified F56 chipbreaker, enhancing process stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT120416L-F56 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold PVD technology, stable chip control and precise insert geometry for reliable milling results and reduced downtime; order directly via Metav Werkzeuge or contact the consultants for application support and tailored recommendations. ADMT120416L-F56 WSP45G milling insert — Tiger·tec Gold PVD, 15° relief (Walter Tools) The ADMT120416L-F56 WSP45G is a PVD-coated milling insert designed for versatile milling of Stahl, rostfreier Stahl and heat‑resistant alloys in demanding production environments. Tiger·tec Gold PVD coating *Suitable for Stahl, rostfreier Stahl, and superalloys *Parallelogram 85° insert geometry *15° relief and 1.6 mm corner radius Stable chip formation for predictable cycle times The combination of the Tiger·tec Gold coating and the F56 chipbreaker delivers consistently controlled chip formation across a wide range of applications. The engineered chip control reduces interruptions and the need for manual chip handling, which helps to maintain steady cycle times and minimises rework. As a result, the production process benefits from improved throughput and fewer process deviations. Durable cutting edges for longer tool life The insert grade WSP45G is a tough, PVD‑coated carbide designed to withstand the thermal and mechanical loads typical of milling operations in Stahl, rostfreier Stahl and high‑temperature alloys. This composition supports a stable cutting edge, reducing flank wear and extending time between indexings or re‑grinds. The outcome is a lower effective tooling cost per component and enhanced process reliability. Precision geometry for flexible milling strategies The parallelogram 85° form combined with a 15° relief and 1.6 mm corner radius provides a balance between strength and accessibility. The insert’s size (12 mm) and thickness code (04) enable both robust roughing and fine finishing passes when matched with appropriate cutting parameters. The geometry promotes a favourable force distribution on the cutter body, supporting stable toolpaths and predictable surface quality. Application scope and process recommendations This indexable insert is intended for general milling tasks across the P / M / S material groups, covering unalloyed and alloyed Stahl, rostfreier Stahl, plus heat‑resistant superalloys and titanium grades. The Tiger·tec Gold layer enhances wear resistance and aids in reliable chip evacuation. For optimal performance, select feeds and speeds that correspond to the workpiece material and machine rigidity; for specialised setups or sample calculations, Metav Werkzeuge’s technical team can provide targeted advice and parameter sheets. Contact Metav Werkzeuge for tailored application advice, supply options and to discuss integration of Walter Tools ADMT120416L‑F56 WSP45G inserts into existing machining processes Technical Data Article number: ADMT120416L-F56-WSP45G-WALTER Designation: ADMT120416L-F56 WSP45G Series: Tiger-tec Gold Manufacturer: Walter Tools Core dimensions Size: 12 mm Thickness code: 04 Relief angle: 15° Corner radius: 1.6 mm Geometry angle: 85° Materials & special features Grade: WSP45G Coating: Tiger·tec Gold (PVD) Chipbreaker: F56 Material range: P / M / S Execution: T Tolerance class: M FAQ What materials can this insert machine? The ADMT120416L‑F56 WSP45G is specified for the P, M and S groups and is suitable for machining Stahl, rostfreier Stahl and heat‑resistant superalloys including titanium. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold PVD coating improves wear resistance and heat tolerance, enabling the WSP45G grade to maintain a stable cutting edge under typical milling loads and extending the tool‑life in serial production. Which chipbreaker is fitted and what is its benefit? The insert features an F56 chipbreaker, which is designed to produce predictable chip shapes and to facilitate efficient evacuation, reducing the risk of recutting and machine downtime. What geometric features support finishing operations? The parallelogram 85° form with a 15° relief and 1.6 mm corner radius provides a compromise between edge strength and surface finish capability, enabling controlled finishing passes when paired with the correct cutting data. Is this insert suited for high‑productivity milling? Yes. The combination of the WSP45G grade and Tiger·tec Gold coating delivers process security and reliable edge stability that support higher material removal rates when machine rigidity and cooling strategy are appropriate. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
ADMT120416R-F56 WKP35G T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance and robust geometry for consistent cutting performance and longer tool life; the design supports reliable chip control in demanding steel and cast-iron operations. Order the ADMT120416R-F56 WKP35G milling insert directly via Metav Werkzeuge or ask our consultants if needed. ADMT120416R-F56 WKP35G milling insert — Tiger‑tec Gold, chipbreaker F56 — Walter Tools ADMT120416R-F56 WKP35G is a precision indexable milling insert optimised for productive machining of steel and cast iron in demanding industrial applications Tiger‑tec Gold coating for enhanced wear resistance Suitable for steel (P) and cast iron (K) Parallelogram 85° form, 15° rake angle Corner radius 1.6 mm for stable cutting Increase process reliability with coated Tiger‑tec Gold technology The Tiger‑tec Gold coating combines a durable layered finish with a tailored substrate to reduce flank and crater wear, which improves consistency in serial production. As a result, cycle times remain steady and tool-change intervals are extended, supporting higher machine uptime and predictable outputs. The WKP35G grade is formulated specifically for the thermal and abrasive demands encountered when machining steel and cast iron, delivering stable cutting and dependable flank-life behaviour under a range of cutting parameters. Geometry and chip control designed for predictable productivity A parallelogram 85° form with a chipbreaker F56 and a corner radius 1.6 mm gives this insert a balanced combination of edge strength and chip segmentation. The geometry promotes controlled chip formation and evacuation, reducing the risk of built-up edge and improving surface finish consistency. The insert’s 15° rake angle supports efficient cutting forces and contributes to lower power consumption during heavy cuts, which translates into measurable gains in productivity on batch and continuous operations. Application versatility and integration into existing tool systems Marked as suitable for the ISO material groups P and K, this indexable insert performs across a broad material spectrum typical in general engineering and automotive production. The grade and series choice minimises sorting complexity while enabling process engineers to select a single insert for multiple workpiece types. Compatibility with standard toolholders and straightforward indexing means rapid replacement and minimal setup overhead, helping to keep spindle time productive and tool logistics simple in the workshop. Contact Metav Werkzeuge for application advice on the Walter Tools Tiger‑tec Gold inserts and fast, reliable availability. Technical Data SKU: ADMT120416R-F56-WKP35G-WALTER Item designation: ADMT120416R-F56 WKP35G Brand: Walter Tools Facts Corner radius: 1.6 mm Rake/free angle: 15° Form/shape: Parallelogram 85° Size: 12 Thickness: 04 Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WKP35G (coated carbide) Chipbreaker: F56 Material suitability: steel (P), cast iron (K) Substrate/grade notation: P / K Execution: T FAQ What materials is this insert suitable for? The ADMT120416R-F56 WKP35G insert is specified for ISO groups P and K, meaning it is suitable for machining steel and cast iron with optimised wear behaviour for these materials. What advantages does the Tiger‑tec Gold series provide? The Tiger‑tec Gold series offers a coated carbide combination designed to improve wear resistance and maintain cutting-edge stability, which helps to extend tool life and secure consistent machining results. How does the insert geometry affect machining results? The parallelogram 85° form with chipbreaker F56 and a corner radius 1.6 mm delivers predictable chip control and edge strength, supporting better surface finish and fewer interruptions for chip-related issues. Is this insert compatible with standard milling holders? Yes, the insert’s form and designation follow common indexable milling standards; it can be integrated into holders that accept the ADMT120416R-F56 family, enabling straightforward indexing and replacement. Which grade designation should be chosen for mixed production of steel and cast iron? The WKP35G grade balances the demands of both steel and cast iron, making it a practical choice for mixed-production environments where a single insert type reduces tool inventory complexity. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners and are mentioned solely for clarification. There is no affiliation between Metav Werkzeuge and the named brands. The offered article is original, factory-new merchandise of the manufacturer.
ADMT120416R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger‑tec Silver performance, stable chip control and robust edge strength to keep milling cycles productive and predictable; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. ADMT120416R-F56 WKP35S indexable milling insert, Tiger‑tec Silver, for Steel and Cast iron | Walter Tools ADMT120416R-F56 WKP35S is a parallelogram milling insert designed for versatile face and slot milling in steels and cast irons Tiger‑tec Silver coating, WKP35S grade Suitable for Steel (P) and Cast iron (K) Parallelogram 85° form for versatile milling Corner radius 1.6 mm for reliable edge strength High-performance coated grade for consistent productivity The ADMT120416R-F56 WKP35S insert uses the Tiger‑tec Silver technology to combine a wear-resistant coated carbide substrate with surface engineering that stabilises flank wear and extends tool life. The WKP35S grade is optimised for cyclic loads typical of steel and cast-iron machining, which translates directly into fewer indexings and reduced tooling cost per part. By controlling flank wear and promoting steady cutting conditions, the insert supports higher metal removal rates while helping to maintain repeatable component dimensions and consistent cycle times. Geometry that improves chip flow and surface quality The parallelogram shape with an 85° form and a 15° clearance angle provides a favourable cutting geometry for a wide range of finishing and semi-finishing operations. The integrated chipbreaker F56 promotes orderly chip formation and evacuation; this reduces re-cutting of swarf and helps achieve a stable surface finish. For customers less familiar with industry coding: the letters P and K follow ISO 513 and indicate suitability for Steel (P) and Cast iron (K) respectively. The combination of geometry and chip control contributes to reduced vibration and improved tool life, which benefits throughput and downstream processes such as heat treatment or assembly. Robust design and process security for workshop integration With a corner radius 1.6 mm and a thickness of 4 mm in a 12 mm insert format, this grade offers a balance between edge strength and cutting versatility. The tolerance class M ensures repeatable seating and positioning in standard milling cutters, simplifying tool setup and changeover. The insert's designation and chipbreaker match common clamping systems, making retrofit into existing toolheads straightforward. Walter Tools' production quality and the Tiger‑tec Silver series deliver consistent performance across batches, supporting predictable maintenance intervals and easier process planning for production environments. For application-specific advice on the Tiger‑tec Silver WKP35S range or to assess suitability for particular machining tasks, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge will provide tailored recommendations and cutting data. Technical data Article number: ADMT120416R-F56-WKP35S-WALTER Label: Fräswendeschneidplatte ADMT120416R-F56 WKP35S Walter Tools Manufacturer: Walter Tools Facts Free cutting angle: 15° Corner radius: 1.6 mm Insert size: 12 mm Thickness: 4 mm Form angle: Parallelogram 85° Tolerance class: M Special features Coating/grade: Tiger‑tec Silver, WKP35S Chipbreaker: F56 Material compatibility: Steel (P) and Cast iron (K) Designation: ADMT120416R-F56 WKP35S Execution: T FAQ Which materials is this insert suitable for? The ADMT120416R-F56 WKP35S insert is designed for Steel (P) and Cast iron (K) applications, following ISO 513 classifications; the Tiger‑tec Silver grade balances toughness and wear resistance for these materials. What does the WKP35S grade offer compared with other grades? WKP35S is a Walter Tools coated carbide grade within the Tiger‑tec Silver family, offering enhanced wear resistance and thermal stability suited to cyclic loads in steel and cast-iron machining. How does the chipbreaker F56 affect machining? The F56 chipbreaker promotes orderly chip formation and evacuation, improving chip control and reducing the risk of re-cutting swarf, which supports a better surface finish and more stable cutting forces. Why is the parallelogram 85° form beneficial? The Parallelogram 85° geometry provides a versatile cutting edge orientation that balances radial and axial force components, enabling flexible engagement strategies for both slotting and face milling with controlled tool deflection. What is the significance of the corner radius and tolerance class? A corner radius of 1.6 mm increases edge robustness for interrupted cuts, while tolerance class M ensures consistent seating and repeatable positioning in compatible milling cutters; together they support process reliability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarks and product names mentioned are the property of their respective owners. Brand names and protected trademarks are cited solely for explanation. No connection between our company and the trademark owners is implied. The offered item is an original, factory-new product of the manufacturer Walter Tools.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com