Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
ADMT120416R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Enhanced productivity and consistent edge life result from the Tiger·tec Gold coating combined with the WSM35G grade, optimised for stainless steels and heat‑resistant alloys. The ADMT120416R‑F56 insert offers controlled chip formation via the F56 breaker and robust edge security with a 1.6 mm corner radius — order directly via Metav Werkzeuge or consult our specialists for application support. ADMT120416R-F56 WSM35G milling insert by Walter Tools — Tiger·tec Gold, F56 chipbreaker The ADMT120416R-F56 WSM35G is a parallelogram 85° milling insert designed for reliable machining of stainless steels and heat‑resistant superalloys. Tiger·tec Gold coating for high wear resistance Optimised F56 chipbreaker for reliable chip control Suitable for stainless steels and superalloys 1.6 mm corner radius for improved edge strength Higher throughput with a hard‑wearing grade and coating The combination of the WSM35G grade and Tiger·tec Gold coating delivers measurable improvements in tool life and process stability when working with demanding materials. Designed for materials that tend to work‑harden or generate high temperatures, this coated cemented‑carbide grade supports stable chip formation and reduced flank wear. The result is fewer tool changes, less unplanned downtime and a more predictable production rhythm — all of which contribute to lower unit costs and higher overall productivity. Consistent surface quality and secure cutting edges The insert’s parallelogram 85° geometry, combined with a 15° free angle and a 1.6 mm corner radius, provides a good mix of accessibility and edge robustness. The F56 chipbreaker is optimised to produce controllable chips on stainless steels and heat‑resistant alloys, reducing the risk of built‑up edge and improving surface finish. With this geometry, the insert maintains a stable cutting edge under thermal stress, which helps to achieve reproducible component quality across series production. Predictable integration into production environments Tolerance class M and the standardised designation simplify tool planning and tool‑holder selection. The insert’s specification supports process planners who prioritise repeatability: consistent tool life, known wear behaviour and easy replacement. The robust nature of the grade and coating also supports tougher operating windows, allowing for optimised cutting parameters and fewer process iterations during setup. This makes the insert particularly suitable for shops focused on efficiency and reliable throughput. Application focus and handling recommendations Specifically engineered for machining stainless steels (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), the insert is well suited to components that demand thermal stability and clean chip evacuation. When integrating the insert into an existing process, select the appropriate feed and depth of cut for temperature control and consider coolant strategy for high alloy materials. The insert’s geometry and chipbreaker ease handling in both semi‑roughing and finishing passes, providing flexibility across several production stages. Contact Metav Werkzeuge for availability and tailored cutting recommendations for the Walter Tools ADMT120416R‑F56 WSM35G milling insert Technical data SKU: ADMT120416R-F56-WSM35G-WALTER Article designation: ADMT120416R-F56 WSM35G Manufacturer: Walter Tools Product type: Milling insert (indexable) Series: Tiger‑tec Gold Grade: WSM35G Core specifications Free angle: 15° Corner radius: 1.6 mm Insert size: 12 Thickness code: 04 Parallelogram angle: 85° Tolerance class: M Chipbreaker: F56 Features and applications Coating technology: Tiger·tec Gold Grade: WSM35G (coated cemented carbide) Suitable materials: stainless steels (M), superalloys and titanium (S) Geometry: Parallelogram 85° Execution code: T Material code: S / M FAQ What materials is this insert intended for? The ADMT120416R‑F56 WSM35G insert is intended for stainless steels (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), using the Tiger·tec Gold coating to maintain edge stability. How does the F56 chipbreaker improve machining? The F56 chipbreaker on this Walter Tools milling insert promotes controlled chip formation and evacuation, reducing the risk of built‑up edge and aiding consistent surface quality. What does the 1.6 mm corner radius mean in practice? A 1.6 mm corner radius provides enhanced edge strength and resistance to chipping, which is beneficial for semi‑finishing and finishing passes where edge robustness supports repeatable results. Is this insert compatible with standard holders? The ADMT120416R‑F56 WSM35G follows standard insert dimensions and tolerance class M, enabling straightforward integration with compatible tool holders designed for parallelogram 85° inserts. Which series and coating technology does the insert use? This insert belongs to the Tiger·tec Gold series and uses the WSM35G coated grade, optimised for demanding, heat‑generating workpiece materials. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the listed manufacturers. The offered item is an original, factory‑new product from the manufacturer.
ADMT120416R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the robust WSP45G grade for extended tool life and consistent chip control; the insert’s 15° relief and 1.6 mm corner radius support secure cutting in demanding milling operations. Order this insert directly via Metav Werkzeuge or consult our technical team for application-specific recommendations. ADMT120416R-F56 WSP45G — Milling indexable insert (Tiger‑tec Gold, 15° relief) by Walter Tools The ADMT120416R-F56 WSP45G is a parallelogram milling indexable insert designed for versatile face and shoulder milling across steel, stainless steel and heat‑resistant alloys. Tiger‑tec Gold PVD‑coated grade WSP45G Suitable for steel, stainless and superalloys 15° relief angle for secure cutting Parallelogram 85° insert with 1.6 mm radius High‑performance coating for longer tool life The combination of Tiger‑tec Gold technology and the WSP45G grade provides a PVD‑coated cutting edge engineered for extended life and stable performance. The coating reduces flank wear and supports consistent chip control, which lowers machining downtime and improves overall process reliability. For production environments where tool longevity and repeatable results matter, this coating‑substrate pairing reduces the frequency of index changes and contributes directly to improved throughput. Edge geometry that ensures repeatable, secure cuts The insert’s 1.6 mm corner radius with a 15° relief angle and Parallelogram 85° shape is designed to deliver stable engagement and predictable cutting forces. A larger corner radius increases edge strength for finish and semi‑roughing passes, while the relief angle promotes safer entry and exit during interrupted cuts. These characteristics combine to reduce vibration and improve surface integrity, making the insert especially suitable where dimensional repeatability and edge robustness are required. Broad material range explained for confident selection Marked as P / M / S, the insert is suitable for machining steel, stainless steel and superalloys/titanium in accordance with ISO material groupings. Steel applications typically demand heat‑resistant and good‑chip‑forming grades; stainless steels require toughness and anti‑built‑up‑edge behaviour; superalloys and titanium need thermal stability and a strong cutting edge. The ADMT120416R‑F56 WSP45G addresses these demands by combining a resilient substrate with a modern PVD coating to balance wear resistance and edge stability. Productivity features and practical benefits on the shop floor The integrated F56 chipbreaker and the insert dimensions (size 12, thickness 04) enable controlled chip formation and reliable evacuation during milling. A tolerance class of M supports consistent seating and minimal runout when paired with correctly matched toolholders, reducing setup variability. Together these features translate into fewer tool changes, predictable tool life and efficient machining cycles — advantages that deliver measurable gains in downstream operations and production planning. For productive and reliable milling with Walter Tools Tiger‑tec Gold technology, choose the ADMT120416R‑F56 WSP45G; contact Metav Werkzeuge for precise application advice or to secure supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: ADMT120416R-F56-WSP45G-WALTER Designation: ADMT120416R-F56 WSP45G Type: Milling indexable insert (Fräswendeschneidplatte) Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 1.6 mm Insert size: 12 Thickness: 04 Tolerance class: M Insert form angle: Parallelogram 85° Special features Grade: WSP45G Series: Tiger‑tec Gold Chipbreaker: F56 Applicable materials: P / M / S (steel, stainless steel, superalloys/titanium) Execution: T FAQ What materials can this insert machine effectively? The ADMT120416R‑F56 WSP45G is specified for P / M / S materials, meaning it is suitable for steel, stainless steel and superalloys/titanium, offering a versatile solution across these groups. How does the Tiger‑tec Gold coating benefit milling operations? Tiger‑tec Gold on the ADMT120416R‑F56 WSP45G enhances wear resistance and thermal stability, resulting in longer tool life and more consistent chip control in continuous and interrupted milling. What is the purpose of the F56 chipbreaker? The F56 chipbreaker on the insert promotes controlled chip formation and evacuation, reducing the risk of recutting chips and improving surface finish during face and shoulder milling. Is the insert suitable for interrupted cuts and roughing? Yes — the combination of a 1.6 mm corner radius, robust grade and 15° relief makes the insert suitable for interrupted cuts and mixed roughing/finishing operations where edge strength is critical. What does the tolerance class M indicate for workshop use? Tolerance class M ensures consistent insert dimensions for precise seating in toolholders, supporting reliable runout and repeatable machining without frequent adjustments. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, factory‑new goods of the manufacturer.
ADMT120420R-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of a Tiger·tec Gold-based grade and a precision F56 chipbreaker to achieve longer tool life and stable chip control in demanding milling operations; order directly via Metav Werkzeuge or request application advice from our consultants. ADMT120420R-F56 WKP35G indexable milling insert — Tiger·tec Gold, 15° clearance (Walter Tools) ADMT120420R-F56 WKP35G is an indexable milling insert designed for high-productivity machining of steel and cast iron, offering a coated-carbide grade and geometry optimised for reliable chip control. Tiger·tec Gold coated for long tool life Optimised chip control with F56 chipbreaker Suitable for steel and cast iron (ISO P/K) Parallelogram 85° geometry, 15° clearance Higher productivity through advanced coating and grade The Tiger·tec Gold coating combined with the WKP35G grade provides a balance of wear resistance and toughness that favours extended cutting edges in mixed-production environments. As a coated carbide solution, the insert is formulated to cope with the heat and abrasion typical when machining steel and cast iron, which are classified under ISO groups P and K respectively. This combination reduces tool changes and supports higher material removal rates, translating into measurable production gains without sacrificing component quality. Consistent chip formation and surface quality The chipbreaker F56 is tailored to produce short, controlled chips when cutting both steels and cast irons, lowering the risk of built-up edge and improving surface finish. The parallelogram 85° insert form and the 15° clearance reduce flank contact and help maintain stable cutting conditions, while the 2 mm corner radius adds robustness at the cutting edge. Together these features decrease vibration and stabilise the cutting process, which supports repeatable dimensional accuracy and a better finish on machined components. Straightforward integration into milling systems Marked as ADMT120420R-F56, the insert has a nominal size of 12 mm and a plate thickness corresponding to the 04 series, with tolerance class M for consistent seating. The execution code T and the series affiliation to Tiger-tec Gold simplify tool selection for standard milling toolholders that accept parallelogram inserts. The grade’s focus on ISO P/K makes it a versatile choice for production lines that handle a mix of unalloyed, alloyed steels and a range of cast-iron grades, enabling process planners to standardise operations and reduce tooling variants. For application-specific recommendations or to confirm stock and delivery options for the ADMT120420R-F56 WKP35G indexable milling insert, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, expert assistance Technical data SKU: ADMT120420R-F56-WKP35G-WALTER Article designation: ADMT120420R-F56 WKP35G Product type: Indexable milling insert Manufacturer: Walter Tools Core data Clearance angle: 15° Corner radius: 2 mm Shape: Parallelogram 85° Insert size: 12 mm Thickness: 4 mm Tolerance class: M Chipbreaker: F56 Special features Coating: Tiger·tec Gold Grade: WKP35G (coated carbide) Material suitability: Steel (ISO P), Cast iron (ISO K) Series: Tiger-tec Gold Execution: T Material of insert: P / K FAQ What materials is this insert designed to machine? The ADMT120420R-F56 WKP35G indexable milling insert from Walter Tools is designed primarily for steel (ISO P) and cast iron (ISO K) applications. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WKP35G grade enhances wear resistance and thermal stability, extending cutting-edge life and enabling higher cutting speeds under demanding conditions. How does the F56 chipbreaker affect performance? The chipbreaker F56 produces short, controlled chips for improved chip evacuation and reduced risk of built-up edge, which contributes to more consistent surface quality and easier swarf handling. Why is the parallelogram 85° geometry advantageous? The parallelogram 85° form reduces radial cutting forces and enables favourable approach angles for milling, improving tool-holder stability and repeatability during interrupted cuts. How should the designation ADMT120420R-F56 be interpreted? The designation ADMT120420R-F56 indicates the insert geometry and chipbreaker version; combined with the WKP35G grade it identifies this specific Walter Tools solution for standard milling toolholders. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT120420R-F56 WKP35S Wendeplatten - Walter Tools
High-performance Tiger‑tec Silver coating together with the WKP35S grade ensures stable chip formation and extended tool life for steel and cast iron machining; ideal where productivity and repeatable results are required. Order directly via Metav Werkzeuge or consult our specialists for application advice. ADMT120420R-F56 WKP35S indexable milling insert (Tiger‑tec Silver) — Walter Tools ADMT120420R-F56 WKP35S is an indexable milling insert designed for productive machining of steel and cast iron, combining robust cutting performance with consistent chip control Tiger‑tec Silver coating for improved wear resistance Designed for steel and cast iron machining 15° clearance, corner radius 2 Parallelogram 85° form for stable cutting Consistent productivity thanks to a modern coating and grade The combination of the Tiger‑tec Silver coating and the WKP35S grade provides high resistance to abrasive wear and stable chip control, targeted specifically at the thermal and mechanical conditions encountered when machining steel and cast iron. This coated carbide formulation reduces flank wear and supports longer tool life, which translates into fewer insert changes and increased uptime. The design focuses on repeatable results under continuous production loads, offering a reliable baseline for process planning and cycle-time optimisation. Geometry that stabilises cuts and improves surface quality A parallelogram 85° plate form with 15° clearance and a corner radius 2 delivers a balance between edge strength and cutting stability. The F56 chipbreaker is tuned for controlled chip segmentation and evacuation during interrupted and continuous cuts, reducing the risk of chatter and improving surface finish. Tolerance class M and the specified plate dimensions aid in predictable seating and indexing, which supports fast insert changes and consistent positioning in tool holders — a practical advantage in high-throughput environments. Integrating the insert into process chains for reliable results The insert's specification — including series designation Tiger‑tec Silver, grade WKP35S, and its suitability for ISO groups P and K — simplifies tooling decisions when matching cutting data to workpiece material. Its execution code T and plate characteristics make it suitable for a wide range of milling operations where stability and tool life are priorities. For production teams seeking lower variability in their machining results, this insert supports standardisation of tool inventories and facilitates predictable maintenance cycles without compromising productivity. Contact Metav Werkzeuge for tailored application guidance on Walter Tools inserts and to confirm suitability for specific machining tasks: info@metav-werkzeuge.com, +49 2822 7131930 Technical data SKU: ADMT120420R-F56-WKP35S-WALTER Article: ADMT120420R-F56 WKP35S Manufacturer: Walter Tools Product type: Indexable milling insert Series: Tiger-tec Silver Core dimensions / performance Clearance angle: 15° Corner radius: 2 Plate form: Parallelogram 85° Plate size: 12 Plate thickness: 04 Tolerance class: M Chipbreaker: F56 Materials / special features Grade: WKP35S (coated carbide) Material suitability: P (steel), K (cast iron) Execution: T Series enrichment: Tiger-tec Silver FAQ Which materials is this insert intended for? The ADMT120420R-F56 WKP35S insert is specified for machining steel (ISO group P) and cast iron (ISO group K) according to the supplied material suitability information. What benefits does the Tiger‑tec Silver coating bring? The Tiger‑tec Silver coating on the WKP35S grade increases wear resistance and supports stable chip control, which helps maintain edge life and consistent part quality during batch production. How does the plate geometry affect machining stability? The parallelogram 85° form combined with 15° clearance and corner radius 2 enhances cutting stability and reduces vibration, contributing to improved surface finish and reduced risk of tool or part damage. Is the F56 chipbreaker suitable for interrupted cuts? The F56 chipbreaker is designed to control chip formation in both continuous and interrupted milling, promoting predictable chip flow and safer machining of abrasive cast iron and tougher steels. Can the ADMT120420R-F56 WKP35S be used for finishing operations? The insert’s geometry and WKP35S grade are optimised for productive general milling; finishing performance depends on specific cutting parameters and machine setup, and data-sheet values should be consulted when setting up fine finishing passes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, brand‑new goods from the manufacturer.
ADMT120420R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold wear resistance and the WSM35G carbide grade with a Parallelogram 85° geometry and a 15° clearance angle, this insert delivers stable chip formation and reliable cutting performance when machining stainless steels and heat‑resistant superalloys. Order the ADMT120420R-F56 WSM35G directly via Metav Werkzeuge or consult our specialists for tailored selection advice. ADMT120420R-F56 WSM35G indexable milling insert for hard-to-machine materials, Tiger·tec Gold – Walter Tools The ADMT120420R-F56 WSM35G is an indexable milling insert engineered for productive cutting of stainless steels and heat‑resistant superalloys, combining a wear‑resistant coating with a secure parallelogram seating for repeatable performance. Tiger·tec Gold coated carbide grade WSM35G Optimised for stainless steels and superalloys Parallelogram 85° geometry for secure clamping 15° clearance angle with 2 mm corner radius Longer tool life and secure chip control for demanding materials The combination of the Tiger·tec Gold coating and the WSM35G grade provides elevated wear resistance and thermal stability, which directly reduces flank wear and prolongs usable edge life when cutting tough materials. For materials classified as M (stainless steels) and S (heat‑resistant superalloys and titanium), the coated carbide helps to reduce the risk of built‑up edge and supports consistent chip formation, leading to fewer interrupted cuts and improved process reliability. The result is higher tool utilisation and fewer index changes during a production shift, benefitting cycle time and manufacturing uptime. Geometry that improves clamping stability and surface finish The insert’s Parallelogram 85° geometry combined with a 15° clearance angle is designed to ensure a stable mechanical seat and optimised cutting direction, so the cutter body sees reduced vibration and improved repeatability. The 2 mm corner radius gives a balance between edge strength and surface quality: larger radii strengthen the cutting edge and extend tool life, while the chosen radius maintains acceptable workpiece finish for most milling operations. The integrated F56 chipbreaker is tuned for controlled fragmentation, which simplifies chip evacuation and reduces heat concentration at the cutting edge. Productivity gains and predictable process behaviour When integrated into a machining strategy for difficult‑to‑machine alloys, this indexable insert supports higher cutting parameters with predictable wear patterns, thanks to the coating and grade combination. The insert’s design focuses on reproducible performance rather than one‑off speed bursts, enabling stable feeds and speeds that improve overall shop efficiency. In practice, this translates into fewer rework operations and a more consistent surface integrity on components made from stainless steels or superalloys, which is especially relevant for precision components and repeat production runs. Discuss the selection of Tiger·tec Gold WSM35G inserts with Metav Werkzeuge to ensure the best match for the application and machine setup — contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for precise recommendations Technical Data Article number: ADMT120420R-F56-WSM35G-WALTER Product label: Fräswendeschneidplatte ADMT120420R-F56 WSM35G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Grade / Sort: WSM35G Series: Tiger-tec Gold Core specifications Clearance angle: 15° Corner radius: 2 mm Plate size: 12 Plate thickness: 04 Geometry: Parallelogram 85° Chipbreaker: F56 Tolerance class: M Features and applications Coating: Tiger·tec Gold Material composition: S / M Suitable for: stainless steels (M) and superalloys/titanium (S) Execution: T Use case: heavy and difficult machining, depending on geometry suitable for stainless steel FAQ What materials is this insert suitable for? The ADMT120420R-F56 WSM35G is suitable for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), due to the thermal stability and wear resistance of the WSM35G grade with Tiger·tec Gold coating. How does the Tiger·tec Gold coating help in production? The Tiger·tec Gold coating increases heat resistance and reduces abrasive wear, which leads to more predictable edge life and improved process security when using this milling insert in continuous production. What advantages does the parallelogram 85° shape provide? The Parallelogram 85° geometry offers a secure clamping position and favourable force distribution in the cutter body, lowering vibration and supporting consistent cutting performance and surface quality. What is the function of the F56 chipbreaker? The F56 chipbreaker is designed to promote controlled chip fragmentation for the targeted material groups, improving chip evacuation and reducing local heat build‑up at the cutting edge. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT120420R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the versatile WSP45G grade for reliable, long-running milling operations; the robust chip control of the F56 breaker and the 85° parallelogram shape ensure stable cutting conditions and fewer tool changes—order the ADMT120420R-F56 WSP45G directly via Metav Werkzeuge or consult our specialists for production planning ADMT120420R-F56 WSP45G — Fräswendeschneidplatte (indexable milling insert) by Walter Tools, Tiger·tec Gold, for P/M/S applications ADMT120420R-F56 WSP45G is an indexable milling insert designed for demanding milling tasks across steels, rostfreier Stahl and heat-resistant alloys Tiger·tec Gold PVD-coated carbide Versatile for P / M / S material groups Parallelogram 85° for axial/face milling Chipbreaker F56 for secure chip control Reliable cutting performance with long tool life The Tiger·tec Gold coating combined with the WSP45G grade provides a PVD-coated carbide solution optimised for milling. This coating technology enhances wear resistance and thermal stability, which translates into longer service life under cyclic loads. The insert’s composition is suitable for machining unalloyed and alloyed steel, tough rostfreier Stahl and heat-resistant superalloys or titanium. The result is consistent dimensional accuracy and fewer interruptions for tool changes, improving overall process efficiency and reducing per-part cost. Geometry engineered for stable cutting and improved process security The insert’s parallelogram 85° geometry and relief angle 15° give a reliable cutting orientation for both axial and face milling. The corner radius 2 mm strengthens the cutting edge for interrupted cuts and heavy engagement, while the chipbreaker F56 supports controlled chip formation and evacuation. These geometry choices combine to reduce the risk of build-up on the edge and to maintain a stable cutting edge under variable cutting conditions, helping to secure repeatable surface finishes and high process reliability. Versatility that boosts productivity and simplifies inventory With applicability to the P / M / S ISO material groups, this grade reduces the need for multiple specialised inserts in mixed-production environments. The insert is supplied in size code 12 with thickness code 04 and tolerance class M, offering a compact, standardised solution for many milling tasks. Using a single, robust grade for a wide material range shortens set-up time, minimises tool inventory and supports higher machine utilisation—benefits that are particularly important in serial production and jobbing workshops. Clear advantages for planning and machining strategy As a Tiger·tec Gold product from Walter Tools, this insert offers proven coating technology and consistent manufacturing quality. The combination of a strong edge radius, an efficient chipbreaker and a stable geometry supports both roughing and semi-finish operations without sacrificing edge life. For production planners, the key advantage is predictable tool life across varied components, enabling better cycle-time estimation and fewer unscheduled tool changes. If further cutting data or machining parameters are required for specific alloys, technical advisors can provide tailored recommendations. Contact Metav Werkzeuge to discuss specification matching, batch supply and application parameters for the ADMT120420R-F56 WSP45G from Walter Tools Technical data Article number: ADMT120420R-F56-WSP45G-WALTER Designation: ADMT120420R-F56 WPL grade: WSP45G Manufacturer: Walter Tools Numbers / Facts Corner radius: 2 mm Relief angle: 15° Insert size: 12 Thickness code: 04 Tolerance class: M Shape: Parallelogram 85° Chipbreaker: F56 Special features / Versions Coating: Tiger·tec Gold Substrate/grade: PVD-coated carbide Material suitability: P / M / S (steel; rostfreier Stahl; superalloys/Titan) Series: Tiger·tec Gold Application: Milling Execution: T FAQ What materials can this insert machine effectively? The ADMT120420R-F56 WSP45G from Walter Tools is suitable for the ISO material groups P, M and S, covering a broad range from unalloyed and alloyed steel to rostfreier Stahl and heat-resistant superalloys or titanium. How does the chipbreaker F56 influence machining? The chipbreaker F56 supports secure chip formation and evacuation; in combination with the Tiger·tec Gold coating it reduces edge build-up and contributes to a stable cutting process for both roughing and semi-finish operations. Which cutting strategies benefit most from the 85° parallelogram shape? The parallelogram 85° geometry is advantageous for axial and face milling where a positive engagement and consistent chip flow are required; it helps maintain cutting forces and improves surface finish consistency. Is this insert suitable for interrupted cuts? Yes, the corner radius 2 mm and the robust PVD-coated carbide grade make the insert resilient to the mechanical shocks typical of interrupted cutting, offering enhanced edge strength. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. There is no connection between our company and the mentioned brands; the reference to Walter Tools serves explanatory purposes. The offered item is an original, factory-new product of the manufacturer.
ADMT120425L-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WKP35S grade for durable, high-productivity milling of steel and cast iron; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. ADMT120425L-F56 WKP35S Fräswendeschneidplatte – for Steel and Cast Iron | Walter Tools A ADMT120425L-F56 WKP35S milling indexable insert designed for reliable general milling of steels (P) and cast irons (K), combining a Tiger·tec Silver coating with a robust chipbreaker geometry. Tiger·tec Silver coating for enhanced wear resistance WKP35S grade for steel and cast iron machining Parallelogram 85° form with 15° relief 2.5 mm corner radius for robust edge strength Maximise uptime with proven coating and grade The combination of the Tiger·tec Silver coating and the WKP35S grade provides a reliable balance between wear resistance and edge toughness for mixed-production environments. Designed specifically to handle the thermal and mechanical demands of machining steel and cast iron, this insert sustains cutting performance under interrupted cuts and variable feed conditions. The coated hardmetal substrate reduces flank and crater wear, which in turn supports longer tool life and fewer indexings, contributing to a more continuous production flow and predictable tool-change intervals. Geometry engineered for stable cutting and surface quality A Parallelogram 85° form and 15° relief create a positive cutting geometry that promotes controlled chip formation and consistent contact with the workpiece. The F56 chipbreaker is tuned to the WKP35S grade to encourage short, breakable chips when working cast iron and to manage swarf effectively when machining steels. The 2.5 mm corner radius increases edge robustness, reducing the risk of premature chipping and helping to maintain surface finish quality over extended tool life. These geometric choices reduce vibration and improve process stability in standard face and shoulder milling operations. Practical compatibility and workshop advantages The insert is supplied in the ADMT120425L-F56 format and suits toolholders that accept the parallelogram 85° form; its nominal size 12 and thickness 4 mm ensure compatibility with common milling systems. With a tolerance class M, the component meets production repeatability expectations for industrial settings. Selection of the WKP35S variant simplifies tooling decisions where mixed batches of steel and cast iron are run, lowering inventory complexity while keeping machining results consistent. For specific cutting data and clamping recommendations, Metav Werkzeuge provides application support to match the insert to the cutter body and machining conditions. Contact Metav Werkzeuge for tailored application guidance on Walter Tools inserts and to secure the ADMT120425L-F56 WKP35S for upcoming production runs Technical Data Article number: ADMT120425L-F56-WKP35S-WALTER Name: ADMT120425L-F56 WKP35S Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger-tec Silver Facts Size: 12 mm Thickness: 4 mm Corner radius: 2.5 mm Relief angle: 15° Plate form: Parallelogram 85° Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WKP35S Chipbreaker: F56 Applicable material groups: Steel (P), Cast iron (K) Execution: T Material designation: P / K FAQ What materials is this insert suitable for? The ADMT120425L-F56 WKP35S insert is specified for machining steel (P) and cast iron (K) according to its WKP35S grade and Tiger·tec Silver coating. How does the Tiger·tec Silver coating benefit production? Tiger·tec Silver on the ADMT120425L-F56 WKP35S reduces abrasive and thermal wear, extending service life and improving process reliability in mixed steel and cast-iron applications. Which geometric features improve edge stability? The Parallelogram 85° form combined with a 2.5 mm corner radius and 15° relief on this insert increases edge strength and reduces the likelihood of chipping under interrupted cuts. Is the chipbreaker suitable for both cast iron and steel? Yes; the F56 chipbreaker is matched to the WKP35S grade to encourage short, controllable chips on cast iron while maintaining good swarf control when machining steel. Can this insert be used with standard cutter bodies? The ADMT120425L-F56 format and nominal size align with common milling holders designed for parallelogram inserts; Metav Werkzeuge can advise on exact cutter compatibility. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no connection between our company and the trademark owners. The offered item is original, factory-new goods of the listed manufacturer.
ADMT120425L-F56 WSP45G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the robust WSP45G grade delivers high process reliability and consistent tool life for demanding milling operations; the insert’s parallelogram 85° geometry with a 2.5 mm corner radius ensures stable chip control and predictable edge behaviour. Order the original insert via Metav Werkzeuge or request technical advice from the Metav consultants for application-specific support. ADMT120425L-F56 WSP45G Fräswendeschneidplatte by Walter Tools — Tiger·tec Gold, 2.5 mm radius The ADMT120425L-F56 WSP45G is a parallelogram milling insert optimised for productive milling of steel, stainless steel and heat‑resistant alloys under varied cutting conditions. Tiger·tec Gold PVD-coated grade WSP45G Suitable for steel, stainless and superalloys Parallelogram 85° shape with 15° relief Corner radius 2.5 mm for stable cutting edge High productivity through optimised grade and coating The Tiger·tec Gold series combines a modern coating stack with a tough carbide substrate to extend tool life under mixed milling tasks. The WSP45G grade is a PVD‑coated carbide designed to handle the thermal and mechanical loads typical of machining steel, stainless steel and superalloys. This results in reliable edge life and fewer insert changes, which in turn reduces machine downtime and increases effective throughput. The coating reduces adhesion and flank wear, supporting longer uninterrupted production cycles and consistent surface quality on the workpiece. Geometry and chip control that stabilise production processes A carefully chosen geometry turns hard specifications into practical advantages: the parallelogram 85° shape provides positive cutting engagement for versatile milling strategies, while the 15° relief supports smooth entry and exit behaviour at varying depths of cut. The F56 chipbreaker promotes controlled chip formation across a range of feed rates, lowering the risk of built‑up edge and improving surface finish. The 2.5 mm corner radius contributes to a robust cutting edge that tolerates interrupted cuts and contributes to predictable wear patterns, enabling planners to schedule tool changes more efficiently. Application benefits and process security for mixed materials This insert suits both general and demanding milling tasks where material mixes occur or when a single tool needs to cover roughing and semi‑finishing steps. The P / M / S suitability means one insert can address unalloyed and alloyed steel, stainless steel and certain heat‑resistant superalloys or titanium, reducing tool inventory complexity. The standardised geometry and proven grade synergy provide process security: machining parameters can be transferred between machines with minimal rework, supporting reproducible component quality and lower scrap rates in production. For process‑reliable milling with the WSP45G Tiger·tec Gold insert, contact Metav Werkzeuge for application consulting and order support at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: ADMT120425L-F56-WSP45G-WALTER Description: Fräswendeschneidplatte ADMT120425L-F56 WSP45G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WSP45G ISO designation: ADMT120425L-F56 WSP45G Facts Relief angle: 15° Corner radius: 2.5 mm Shape: Parallelogram 85° Size: 12 Thickness code: 04 Chipbreaker: F56 Tolerance class: M Special features Coating: Tiger·tec Gold PVD technology Material/grade: PVD-coated carbide (WSP45G) Material suitability: P / M / S Execution: T Series description: Tough, versatile PVD grade for milling FAQ What materials can be machined with this insert? The ADMT120425L-F56 WSP45G insert is rated for steel, stainless steel and superalloys/titanium (P / M / S), making it suitable for mixed‑material milling tasks where a single grade is preferred. Which feature ensures stable chip formation? The F56 chipbreaker combined with the parallelogram 85° geometry and 2.5 mm corner radius promotes controlled chip formation and reduces the risk of built‑up edge during milling. Is this insert suitable for finishing operations? Yes, the PVD‑coated WSP45G grade provides good wear resistance and surface quality, enabling use in semi‑finishing and certain finishing applications depending on cutting data. How does the Tiger·tec Gold coating contribute to tool life? The Tiger·tec Gold coating reduces adhesive wear and improves thermal resistance, which supports longer tool life and consistent cutting performance under variable cutting conditions. What geometry advantages does the insert offer for production? The 15° relief and parallelogram form provide positive cutting engagement and predictable entry/exit behaviour, aiding stable process parameters and easier transfer between machines. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT120425R-F56 WKP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WKP35G grade and the F56 chipbreaker for extended tool life and reliable chip control in steel and cast iron milling; the parallelogram 85° geometry and 2.5 mm corner radius ensure stable cutting and reproducible results. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. ADMT120425R-F56 WKP35G Fräswendeschneidplatte – Tiger·tec Gold, F56 chipbreaker (Walter Tools) The ADMT120425R-F56 WKP35G is an indexable milling insert engineered for productive machining of steel (P) and cast iron (K) with emphasis on process stability and repeatable performance Tiger·tec Gold coating for extended tool life WKP35G grade optimised for steel and cast iron Parallelogram 85° for stable cutting geometry F56 chipbreaker for controlled chip formation Increased productivity through advanced coating and grade The combination of the Tiger·tec Gold coating and the WKP35G cemented-carbide grade delivers measurable productivity gains in medium to heavy steel and cast-iron milling. Coating technology reduces flank wear and improves heat resistance, which translates into longer tool life and fewer index changes. For production-focused workshops this means fewer interruptions and higher output per toolset. The F56 chipbreaker contributes to predictable chip formation, reducing the risk of choke-ups and supporting unattended machining sequences. Overall, the insert supports a balance of durability and material removal rate that suits series production and demanding single-pass operations. Stable geometry for consistent surface quality and process security The Parallelogram 85° form with a 15° clearance and a 2.5 mm corner radius provides a robust cutting edge geometry that promotes stable engagement and consistent surface finish. This geometry helps distribute cutting forces, lowering vibration and protecting the cutting edge under varying depths of cut. The F56 chipbreaker is designed to generate short, controllable chips in both steel and cast iron, aiding chip evacuation and reducing machine downtime. Tolerance class M supports interchangeability and predictable seating in standard toolholders, which simplifies tool management and minimises setup deviations. Application guidance and practical benefits for workshop use Designed for the ISO material groups P (steel) and K (cast iron), this insert suits a wide range of milling tasks from roughing to semi-finishing where robust chip control and tool life are priorities. The insert thickness and insert size provide a stable platform for higher cutting volumes, while the coated grade helps maintain edge integrity under thermally demanding conditions. For selection, match the insert geometry and chipbreaker to the cutter body and machining strategy; the combination of grade, coating and geometry typically improves process repeatability and reduces overall tooling costs through extended service intervals. For tailored recommendations on feeds, speeds and cutter compatibility, technical advice is available. Contact Metav Werkzeuge for specific application advice on Tiger·tec Gold inserts and to arrange supply of the ADMT120425R-F56 WKP35G from Walter Tools — info@metav-werkzeuge.com, +49 2822 7131930 Technical data SKU: ADMT120425R-F56-WKP35G-WALTER Article: ADMT120425R-F56 WKP35G Product type: Fräswendeschneidplatte (milling insert) Brand: Walter Tools Facts Insert size: 12 mm Thickness: 4 mm Relief angle: 15° Corner radius: 2.5 mm Shape: Parallelogram 85° Tolerance class: M Special features Series: Tiger·tec Gold Grade: WKP35G (coated carbide) Chipbreaker: F56 Machinable materials: Steel (P), Cast iron (K) Execution: T FAQ What materials is this insert suited for? The ADMT120425R-F56 WKP35G insert is specified for ISO groups P and K, meaning it is suitable for machining steel and cast iron, leveraging the WKP35G grade and Tiger·tec Gold coating for those materials. How does the F56 chipbreaker affect machining? The F56 chipbreaker on this Walter Tools insert promotes short, controlled chips, improving chip evacuation and reducing the risk of tool or machine stoppages during steel and cast-iron milling. What benefits does the Tiger·tec Gold coating provide? Tiger·tec Gold coating increases wear resistance and thermal stability, extending tool life and supporting higher cutting parameters compared with uncoated grades. Is the insert compatible with standard toolholders for 85° parallelogram inserts? Yes, the parallelogram 85° form and tolerance class M are intended for use with matching standard milling cutter bodies designed for this geometry. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names such as Walter Tools are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered article is an original, brand-new product of the manufacturer.
ADMT120425R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of extended tool life through Tiger·tec Silver and stable chip control from the F56 chipbreaker for consistent, productive milling; order the ADMT120425R-F56 WKP35S directly via Metav Werkzeuge or consult our experts for application-specific advice ADMT120425R-F56 WKP35S — indexable milling insert for steel and cast iron by Walter Tools The ADMT120425R-F56 WKP35S is a coated indexable milling insert designed for general steel and cast iron machining, offering a balance of durability and dependable chip control in a parallelogram 85° geometry Tiger·tec Silver coating for extended life Optimised F56 chipbreaker for stable chips Parallelogram 85° form for versatile milling Suitable for steel and cast iron machining Longer tool life thanks to Tiger·tec Silver coating The coated hardmetal grade WKP35S, part of the Tiger·tec Silver family, is engineered to resist abrasive wear and thermal stresses common in machining steels and cast irons. This coating technology reduces flank wear rates and maintains a stable cutting edge over longer tool paths, which translates into fewer insert changes and improved overall throughput. For production environments where consistent tool life reduces downtime, the coated grade provides a measurable benefit to cycle-time reliability and cost-efficiency. Predictable chip formation and process stability The F56 chipbreaker geometry is developed to generate short, controllable chips when machining group P (steel) and group K (cast iron) materials according to ISO 513. Effective chip control reduces risk of built-up edge and lowers the likelihood of tool or workpiece damage, enabling steady feed rates and repeatable surface quality. The combination of chipformer and grade supports stable cutting forces, which is particularly valuable in batch production and mixed-material workflows. Geometry for flexible milling strategies A parallelogram plate in an 85° form with a 15° clearance angle provides a versatile contact geometry for face and light slot milling operations. The insert’s corner radius of 2.5 mm helps maintain edge strength while delivering the desired surface finish, making it suitable for both roughing and semi-finishing passes. Such geometry allows process engineers to adapt cutting parameters for either higher metal removal rates or improved surface integrity without changing insert families. Application guidance and industrial benefits This indexable insert is supplied in the execution type T and commonly measures as the 12 series format, making it compatible with standard toolholders designed for this ISO-style designation. The insert’s tolerance class M ensures consistent interchangeability and predictable toolholder fit, which supports stable clamping and runout behaviour. When integrated into a machining cell, the insert helps to reduce inspection intervals and supports predictable production planning thanks to its repeatable performance attributes. For reliable milling results with the ADMT120425R-F56 WKP35S from Walter Tools, contact Metav Werkzeuge for tailored advice and rapid supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: ADMT120425R-F56-WKP35S-WALTER Label: Fräswendeschneidplatte ADMT120425R-F56 WKP35S Walter Tools Manufacturer: Walter Tools Product type: Indexable milling insert Series: Tiger-tec Silver Core specifications Size: 12 Plate thickness: 04 Corner radius: 2.5 mm Clearance angle: 15° Plate form: Parallelogram 85° Chipbreaker: F56 Materials & special features Grade: WKP35S (coated cemented carbide) Applicable materials: Steel (P) and Cast iron (K) Tolerance class: M Execution: T Story trigger: indexable inserts FAQ What materials is this insert suited for? The ADMT120425R-F56 WKP35S is formulated for machining group P (steel) and group K (cast iron) materials according to ISO 513, making it suitable for a wide range of steels and cast irons. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the WKP35S grade reduces abrasive wear and thermal softening, extending insert life and improving downtime intervals in serial production. Which chipbreaker should be selected for stable chip flow? The F56 chipbreaker integrated into this insert is optimised for short, controlled chips in steel and cast iron, supporting stable feeds and reducing chip-handling issues. Is the insert compatible with standard toolholders? The insert follows common ISO-style dimensions for the 12 series in a parallelogram 85° form and tolerance class M, enabling compatibility with appropriate toolholders designed for this format. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and indicate no affiliation between the seller and the named manufacturers. The offered article is an original, brand-new product of the manufacturer (Walter Tools).
ADMT120425R-F56 WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WSP45G grade for reliable edge stability and broad material capability; the F56 chipformer supports consistent chip control and high productivity, while the parallelogram geometry and 15° relief ensure robust milling performance. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice. ADMT120425R-F56 WSP45G – Indexable milling insert, Tiger·tec Gold coating, 15° relief (Walter Tools) ADMT120425R-F56 WSP45G is a high-performance indexable milling insert designed for versatile milling of Stahl, rostfreier Stahl and demanding superalloys and titanium components Tiger·tec Gold PVD coating Suitable for Stahl, rostfreier Stahl, superalloys Parallelogram 85° geometry 15° relief, 2.5 mm corner radius Greater productivity through stable cutting and chip control The coated grade from the Tiger·tec Gold family combines wear resistance with toughness to extend tool life under industrial milling conditions. The WSP45G grade is optimised for secure chip formation with the F56 chipbreaker, which reduces the risk of built-up edge and supports a steady material flow away from the cutting zone. This leads to fewer interruptions, more consistent component quality and a measurable increase in throughput for series production. The insert’s construction is aimed at delivering predictable performance even when machining mixed batches of components. Reduced tool changes and process reliability from geometry and edge design A 15° relief angle and a 2.5 mm corner radius provide a robust cutting edge that tolerates intermittent cuts and varying engagement depths. The parallelogram 85° shape gives favourable cutting directions for shoulder and face milling, distributing cutting forces to the insert pocket and machine spindle. For workshops seeking fewer tool interventions and reliable cycle times, these geometric choices translate into practical benefits: longer intervals between indexings and a lower rate of tool-related rejects, especially in heavy-duty operations. Broad material coverage for flexible production planning The insert is specified for material groups P, M and S, which correspond to machining Stahl, rostfreier Stahl and heat-resistant superalloys/titanium respectively. The combination of the WSP45G substrate and the Tiger·tec Gold coating balances thermal resistance with edge stability, enabling one grade to be used across multiple workpiece types. This simplifies tool inventory and supports flexible job scheduling: the same insert can be deployed for a range of components without compromise on surface finish or dimensional repeatability. Practical handling, mounting and repeatable accuracy Dimension and tolerance designations are aimed at compatibility with standard milling cutters that accept parallelogram inserts. The insert’s tolerance class M and its consistent thickness code allow straightforward seating in the cutter pocket and reproducible index positions after rotation. These characteristics support simple assembly routines, reliable torque transfer and consistent results from one operator to the next. Backed by the manufacturer’s focus on precision, the insert contributes to stable process windows and traceable manufacturing outcomes. Contact Metav Werkzeuge for tailored application advice and to source Walter Tools Tiger·tec Gold inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ADMT120425R-F56-WSP45G-WALTER Article designation: ADMT120425R-F56 WSP45G Product type: Indexable milling insert Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Relief angle: 15° Corner radius: 2.5 mm Insert size: 12 Thickness code: 04 Tolerance class: M Special features Grade: WSP45G Chipformer: F56 Shape: Parallelogram 85° Suitable materials: P / M / S (Stahl, rostfreier Stahl, superalloys and titanium) Execution: T Designation without grade: ADMT120425R-F56 FAQ Which materials can this insert machine effectively? The ADMT120425R-F56 WSP45G insert from Walter Tools is specified for material groups P, M and S — in other words for Stahl, rostfreier Stahl and heat-resistant superalloys / titanium — offering a single-grade option for mixed-production environments. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WSP45G grade enhances wear resistance and temperature stability for the ADMT120425R-F56 WSP45G indexable milling insert, improving edge life and maintaining surface quality across extended cycles. How do the 15° relief and 2.5 mm corner radius affect machining? The 15° relief reduces rubbing and supports efficient cutting engagement, while the 2.5 mm corner radius increases edge strength on the ADMT120425R-F56 WSP45G, making it more tolerant of interrupted cuts and deeper depths of cut. What milling strategies suit the parallelogram 85° geometry? Parallelogram 85° inserts are well suited to shoulder and face milling where side cutting and radial engagement are required; the ADMT120425R-F56 WSP45G’s shape helps to control cutting forces and maintain consistent chip evacuation. Is this insert suitable for standard cutter pockets and indexing routines? Yes, the ADMT120425R-F56 WSP45G follows common insert sizing and tolerance conventions (tolerance class M and thickness code 04), enabling repeatable seating and reliable indexing in compatible milling cutters. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; Walter Tools is a global brand of precision cutting tools and part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names are used for clarification of product origin only; there is no affiliation implied. The offered article is an original, factory-new product from the manufacturer.
ADMT120430L-F56 WKP35S T Wendeplatten - Walter Tools
Take advantage of the high-performance combination of Tiger·tec Silver coating and the WKP35S grade for reliable machining of steel and cast iron; the robust F56 chipbreaker and parallelogram form ensure consistent chip control and long tool life. Order the ADMT120430L-F56 WKP35S directly via Metav Werkzeuge or consult the team for application advice. ADMT120430L-F56 WKP35S Fräswendeschneidplatte by Walter Tools — Tiger·tec Silver, F56 chipbreaker The ADMT120430L-F56 WKP35S is a parallelogram milling insert designed for heavy-duty finishing and semi-finishing operations in steel and cast iron, combining a modern coating with a geometry optimised for stable chip formation. Tiger·tec Silver coating for high process security Optimised F56 chipbreaker for steel and cast iron Parallelogram 85° form with 15° relief 3 mm nose radius for robust edge strength High-efficiency machining with proven coating technology The insert benefits from the Tiger·tec Silver coating and the WKP35S grade, which together deliver stable chip formation and extended edge life when machining steel and cast iron. The coated cemented carbide substrate is engineered to withstand the thermal and mechanical loads typical of ISO P and K materials; this results in fewer tool changes and improved process reliability. The design supports consistent cutting conditions and helps maintain component tolerances during medium- to high-material-removal-rate applications. Geometry designed for chip control and surface quality The F56 chipbreaker and the parallelogram 85° form provide controlled chip flow and favourable cutting forces, reducing vibration and improving surface finish. The insert’s 15° relief angle lowers cutting temperatures and promotes predictable wear behaviour, while the 3 mm corner radius increases edge robustness under intermittent cutting conditions. These geometric features translate into measurable benefits: longer tool life, fewer interruptions, and steady component quality in industrial machining environments. Practical selection and reliable performance in production With tolerance class M and a standard insert size and thickness, this grade is a versatile choice for production shops seeking a balance between performance and cost-efficiency. The plate is suitable where predictable wear and repeatable performance are priorities; its combination of coating, grade and chipbreaker supports efficient machining cycles and contributes to reduced downtime. For complex material mixes involving unalloyed and alloyed steels as well as cast irons, the insert offers a pragmatic solution to maintain throughput and finish requirements. Contact Metav Werkzeuge for tailored cutting data and application recommendations on Walter Tools Tiger·tec Silver inserts or arrange procurement through Metav Werkzeuge. Technical Data Article number: ADMT120430L-F56-WKP35S-WALTER Name: Fräswendeschneidplatte ADMT120430L-F56 WKP35S Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 3 mm Plate form: Parallelogram 85° Tolerance class: M Plate size: 12 Plate thickness: 04 Special features Series: Tiger·tec Silver Grade: WKP35S Chipbreaker: F56 Applicable materials: P (steel), K (cast iron) Material base: coated cemented carbide Application: finishing and semi-finishing milling FAQ What materials is this insert suitable for? The ADMT120430L-F56 WKP35S insert is specified for steel (ISO P) and cast iron (ISO K), reflecting the WKP35S grade’s optimisation for these material groups. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the Walter Tools insert reduces adhesive and abrasive wear, improving process stability and extending the effective cutting life in a range of steel and cast-iron applications. What does the F56 chipbreaker provide in practice? The F56 chipbreaker offers controlled chip formation and evacuation, which helps to lower cutting forces and enhance surface finish during finishing and semi-finishing operations. Is the insert suitable for interrupted cuts? Yes; the 3 mm corner radius and the robust coated carbide grade increase edge strength, supporting intermittent cutting conditions typically encountered in production milling. Can cutting data be provided for specific applications? Application-specific cutting data and recommendations are available; Metav Werkzeuge can advise on speeds, feeds and optimal machining strategies for the Walter Tools insert. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and brand names are the property of their respective owners. Brand names are mentioned for identification and explanatory purposes only and do not imply any affiliation with or endorsement by the brand owners. The offered item is an original, factory-new product of the manufacturer.
ADMT120430L-F56 WSP45G Wendeplatten - Walter Tools
Take advantage of robust heat-resistant coating and a secure chipbreaker geometry for reliable milling of steels, stainless steels and high-temperature alloys, reducing downtime and ensuring consistent surface quality. Order the insert directly via Metav Werkzeuge or request advice from our consultants for application-specific selection. ADMT120430L-F56 WSP45G milling insert, Tiger-tec Gold – 15° relief angle, parallelogram 85° (Walter Tools) A ADMT120430L-F56 WSP45G milling insert designed for versatile face and shoulder milling across Steel, stainless steel and superalloys/Titanium, combining a Tiger‑tec Gold PVD coating with a supportive chipbreaker for stable cutting Tiger‑tec Gold PVD coating for heat resistance Versatile grade WSP45G for P / M / S materials 15° relief angle for secure edge engagement Parallelogram 85° form with F56 chipbreaker Consistent cutting performance through advanced coating and grade The Tiger‑tec Gold coating and the WSP45G grade form the technical core that delivers stable cutting edges under thermal and mechanical stress. Designed for applications that generate significant heat, the coated carbide composition promotes controlled wear and reduced edge build-up, which translates into longer tool life and fewer interruptions. For shops that run mixed production batches, the insert’s adaptability to Steel, stainless steel and superalloys/Titanium reduces tool changes and simplifies inventory management. The result is more predictable cycle times and consistent surface finish without relying on complex parameter tuning. Secure chip control and geometry that supports process reliability The parallelogram geometry with an 85° cutting face and the F56 chipbreaker ensure reliable chip formation and evacuation in a wide range of cutting conditions. The combination of the 15° relief angle and a corner radius of 3 mm provides a balance between strength and sharpness: the cutting edge resists chipping during interrupted cuts while maintaining the ability to produce accurate contours. This geometry is particularly advantageous in shoulder milling and helical approaches where predictable chip flow reduces the risk of workpiece damage and tool breakage, thereby supporting higher machine uptime. Practical benefits for production and tool management With a standard insert size and a clear designation that matches industry ordering systems, the part integrates easily into existing tooling setups. The insert’s tolerance class M and the thickness code ensure interchangeability and repeatable seating in tool holders, which aids quick changeovers and reduces setup errors. By choosing this indexable insert, manufacturers benefit from a reduced total cost of ownership through fewer insert replacements and steadier process outputs. The engineering focus is on measurable improvements: fewer scrap parts, less rework and steadier cycle times for batch and continuous milling operations. Consider the Walter Tools Tiger‑tec Gold ADMT120430L‑F56 WSP45G for reliable, low‑maintenance milling; contact Metav Werkzeuge for tailored recommendations and application support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ADMT120430L-F56-WSP45G-WALTER Designation: ADMT120430L-F56 WSP45G Manufacturer: Walter Tools Product type: milling insert Series: Tiger‑tec Gold Facts Size: 12 Thickness code: 04 Corner radius: 3 mm Relief angle: 15° Tolerance class: M Special features Chipbreaker: F56 Plate form: Parallelogram 85° Grade: WSP45G (PVD coated carbide) Material compatibility: Steel / rostfreier Stahl / Superalloys and Titanium Execution: T FAQ What materials is this insert suitable for? The ADMT120430L‑F56 WSP45G insert is specified for machining Steel, rostfreier Stahl (stainless steel) and heat‑resistant superalloys/Titanium, reflecting the WSP45G grade’s broad applicability. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold PVD coating enhances thermal resistance and wear performance, helping the ADMT120430L‑F56 WSP45G maintain cutting edge stability under higher temperatures and prolonged operation. What benefit does the F56 chipbreaker provide? The F56 chipbreaker supports controlled chip formation and evacuation, reducing the risk of built‑up edge and ensuring consistent surface quality during face and shoulder milling. Is the relief angle important for interrupted cuts? Yes, the 15° relief angle helps secure the cutting edge during engagements and interrupted cuts, improving edge strength and reducing chipping on the ADMT120430L‑F56 WSP45G insert. Can this insert be used in standard toolholders? The insert follows common industry designations and tolerance class M, enabling straightforward integration into compatible toolholders designed for parallelogram inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is original, factory‑new goods of the manufacturer.
ADMT120430R-F56 WKP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the WKP35G grade for consistent wear control and predictable tool life in steel and cast iron machining; the insert’s 85° parallelogram geometry and F56 chipbreaker provide axial stability and improved chip formation. Order directly via Metav Werkzeuge or request advice from our consultants for application‑specific recommendations. ADMT120430R-F56 WKP35G milling insert — Tiger‑tec Gold grade for steel and cast iron (Walter Tools) The ADMT120430R-F56 WKP35G is a robust parallelogram 85° milling insert engineered for productive machining of steel (ISO group P) and cast iron (ISO group K), combining a high‑performance coating with a chipbreaker designed for stable cutting under industrial conditions. Tiger‑tec Gold coated grade WKP35G Optimised for steel and cast iron machining Parallelogram 85° geometry for axial stability 15° relief angle with 3 mm corner radius Extended tool life through advanced coating and grade The insert features Tiger‑tec Gold coating and the WKP35G grade, a coated cemented‑carbide combination developed to cope with the heat and abrasion typical of machining steel and cast iron. This surface technology reduces flank and crater wear, extending in‑service life and lowering the frequency of tool changes. For production environments that prioritise uptime, the improved wear resistance translates into fewer interruptions and more predictable maintenance windows, supporting long‑run efficiency and cost control. Geometry and chip control that stabilise the cut A parallelogram 85° form factor provides axial stability and effective engagement with the workpiece; together with the F56 chipbreaker this geometry promotes controlled chip segmentation and evacuation. The insert has a 15° relief angle and a 3 mm corner radius, which together balance edge strength and cutting forces to reduce vibration and preserve surface finish. These characteristics make the insert suitable for operations where steady cutting conditions and consistent dimensional results are required, particularly in high‑throughput milling processes. Process reliability and application scope Designed in accordance with ISO material groups P and K, the insert supports machining across a broad range of unalloyed and alloyed steels as well as various cast irons. The coated grade and chip control deliver process reliability, helping to maintain cutting performance even when conditions vary between batches. For engineering workshops and contract manufacturers seeking reproducible component quality, this insert provides a stable platform to build machining strategies with fewer variables and clearer performance expectations. Contact Metav Werkzeuge today to discuss how the Walter Tools Tiger‑tec Gold ADMT120430R-F56 WKP35G milling insert can be integrated into existing processes or to arrange a technical consultation with our specialists Technical Data SKU: ADMT120430R-F56-WKP35G-WALTER Article designation: ADMT120430R-F56 WKP35G Product type: Milling insert Brand: Walter Tools Core data Relief angle: 15° Corner radius: 3 Insert shape: Parallelogram 85° Insert size: 12 Thickness: 04 Tolerance class: M Features / Applications Series / coating: Tiger‑tec Gold Grade: WKP35G Chipbreaker: F56 Material groups: P (steel), K (cast iron) Substrate: Coated cemented carbide FAQ What materials is this insert suitable for? The ADMT120430R-F56 WKP35G is intended for machining steel (ISO group P) and cast iron (ISO group K) as specified by the WKP35G grade and Tiger‑tec Gold coating. How does the F56 chipbreaker affect performance? The F56 chipbreaker on this insert improves chip formation and evacuation, supporting stable cutting and consistent surface finish when milling steel and cast iron. What advantages does the Tiger‑tec Gold coating provide? Tiger‑tec Gold coating enhances wear resistance and thermal stability, which increases tool life and maintains cutting performance under demanding production conditions for the ADMT120430R-F56 WKP35G. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik group. Protected trademarks and product names are the property of their respective owners and are mentioned here for explanatory purposes only. There is no affiliation between our company and the named brands beyond product distribution. The offered item is original, factory‑new goods from the manufacturer.
ADMT120430R-F56 WKP35S W KP35S Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, excellent chip control and the WKP35S coated carbide grade for consistent milling results; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. ADMT120430R-F56 WKP35S — Fräswendeschneidplatte (Parallelogram 85°, 15° clearance) by Walter Tools ADMT120430R-F56 WKP35S is a parallelogram milling insert engineered for efficient steel and cast iron machining in a wide range of general milling operations Tiger·tec Silver coated carbide grade WKP35S Parallelogram 85° shape for versatile milling 15° clearance angle, 3 mm corner radius For steel and cast iron machining Coating and grade that extend tool life and throughput The Tiger·tec Silver coating combined with the WKP35S grade provides a robust, coated carbide structure that reduces abrasive wear under typical steel and cast iron cutting conditions. This surface technology is designed for stable chip formation and good adhesion resistance, which translates into longer tool life and fewer index changes in production. For operators seeking predictable performance, this combination improves mean time between tool changes and supports steady machining parameters, making the insert a reliable choice for repeated, high-volume cuts. Geometry tuned for controllable chips and repeatable surface quality The parallelogram 85° form together with the chipbreaker F56 delivers a balance between entry stability and chip control, especially in interrupted or general milling passes. The 15° clearance angle reduces rubbing at the flank while the 3 mm corner radius helps to maintain edge strength and consistent surface finish on the workpiece. These geometric decisions reduce the risk of chatter in many set-ups and support predictable results in batch production, so processes run with fewer quality deviations and less rework. Practical production benefits for process security and flexibility Specified in an M tolerance class and available in a compact 12 size, this indexable plate suits a broad spectrum of cutters and set-ups. Its suitability for both steel (P) and cast iron (K) applications enables stock rationalisation and faster tool planning across mixed-material jobs. The stable combination of grade and geometry promotes higher machining speeds with controlled wear behaviour, thereby increasing overall productivity and lowering per-part tooling cost. In short, the insert supports robust machining strategies where consistent results and efficient chip evacuation matter. For tailored advice on integrating the Walter Tools ADMT120430R-F56 WKP35S into production or to arrange delivery via Metav Werkzeuge contact +49 2822 7131930 or email info@metav-werkzeuge.com — our consultants will recommend the optimal cutter and cutting data for the application Technical data Article number: ADMT120430R-F56-WKP35S-WALTER Product type: Fräswendeschneidplatte ISO designation: ADMT120430R-F56 WKP35S Grade/Sort: WKP35S Series: Tiger·tec Silver Manufacturer: Walter Tools Facts Clearance angle: 15° Corner radius: 3 mm Plate size: 12 mm Tolerance class: M Chipbreaker: F56 Special features Parallelogram 85° plate form Coating: Tiger·tec Silver Suitable for: steel (P) Suitable for: cast iron (K) Execution: T Material designation: P / K FAQ What materials can this insert machine effectively? The ADMT120430R-F56 WKP35S is designed for machining steel and cast iron, reflecting the P/K designation of the WKP35S grade. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the WKP35S grade increases wear resistance and supports stable chip formation, which helps maintain consistent cutting performance and longer tool life. Is the geometry suitable for general-purpose milling? Yes; the parallelogram 85° shape combined with chipbreaker F56 and a 3 mm corner radius provides versatile performance across common milling tasks while improving chip control. Can the insert be used for interrupted cuts or tougher set-ups? The insert’s robust grade and geometry are suitable for many interrupted and standard heavy milling operations, offering reliable edge stability and process security. What tolerance and size information should be noted when specifying toolholders? The plate is supplied in M tolerance class and a 12 size; confirm compatibility with the intended cutter body and clamping system for optimal fit. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned only for explanatory purposes. There is no connection between our company and the named brands. The offered item is original, brand-new goods of the manufacturer.
ADMT120430R-F56 WSM35G T Wendeplatten - Walter Tools
Take advantage of a combination of high wear resistance, secure chip control and a geometry engineered for stable clamping; order directly via Metav Werkzeuge or consult our technical team for material-specific cutting data. ADMT120430R-F56 WSM35G milling insert – Tiger·tec Gold for stainless steels and superalloys | Walter Tools A robust ADMT120430R-F56 WSM35G milling insert engineered for reliable machining of stainless steels and heat‑resistant superalloys, optimised for secure clamping and consistent chip formation Tiger·tec Gold coated for long tool life Optimised for stainless steels and superalloys Parallelogram 85° geometry for secure clamping Longer service life through advanced coating technology The Tiger·tec Gold coating combined with the WSM35G grade provides a wear‑resistant, coated‑carbide structure that reduces flank wear and delays edge breakdown during demanding operations. This material combination is particularly effective when machining ISO group M materials (rostfreie Stähle) and S group alloys (heat‑resistant superalloys and titanium), where thermal loads and adhesive tendencies can shorten tool life. The result is more predictable performance and fewer tool changes, which supports higher machine utilisation and lower per‑part costs. Geometry and edge design for secure, controlled cutting A parallelogram 85° plate form with a 15° relief angle and a corner radius 3 delivers a reliable seat and cutting‑edge orientation that resists chipping under heavy engagement. The integrated chipbreaker F56 is tuned for stable chip formation in tough materials, lowering the risk of built‑up edge and improving surface quality. These geometry choices favour shoulder and face milling operations where process security and repeatable surface finish are required. Process efficiency and consistent production results The indexable insert’s construction emphasises reproducible cutting behaviour and stable edge life, supporting efficient batch processing and reduced setup variability. Using a coated grade like WSM35G means a combination of thermal resistance and edge stability, which often leads to fewer interruptions for tool changes and smoothing of production flow. Metav Werkzeuge can provide additional cutting‑parameter recommendations to align the insert’s strengths with centre‑line speeds and feed rates in specific applications. Contact Metav Werkzeuge for tailored advice on the Walter Tools ADMT120430R-F56 WSM35G milling insert and request detailed cutting data via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: ADMT120430R-F56-WSM35G-WALTER Name: ADMT120430R-F56 WSM35G Manufacturer: Walter Tools Product type: Milling insert (indexable) Facts Relief angle: 15° Corner radius: 3 Plate size: 12 Thickness code: 04 Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WSM35G (coated carbide) Chipbreaker: F56 Plate form: Parallelogram 85° Material suitability: M (stainless steels), S (superalloys/titanium) Series: Tiger·tec Gold FAQ Is this insert suitable for stainless steels and high‑temperature alloys? The ADMT120430R-F56 WSM35G insert is specifically designed for ISO group M (rostfreie Stähle) and S materials, combining the Tiger·tec Gold coating and the WSM35G grade to improve thermal resistance and edge stability during machining. What does the chipbreaker F56 provide in practice? Chipbreaker F56 promotes controlled chip formation and evacuation in demanding materials, reducing the likelihood of built‑up edge and improving surface finish when using this Walter Tools milling insert. How does the parallelogram 85° form affect clamping and cutting? The parallelogram 85° geometry ensures a secure seat and a favourable cutting angle for shoulder and face milling, contributing to reduced vibrations and consistent cutting forces with the ADMT120430R‑F56 design. Which operations benefit most from the WSM35G grade? Operations that involve interrupted cuts, high temperatures or sticky workpiece behaviour—typical in stainless steels and superalloys—benefit from the wear resistance and edge stability of the WSM35G grade and the Tiger·tec Gold coating. How does the corner radius influence surface quality? A corner radius of 3 helps distribute cutting forces and supports a more robust cutting edge, often improving surface finish and extending edge life under moderate to heavy cutting conditions. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, brand‑new product from the manufacturer.
ADMT120430R-F56 WSM45X T Wendeplatten - Walter Tools
Take advantage of the combination of a coated cemented-carbide grade engineered for heat-resistant alloys, a parallelogram 85° form for precise shoulder milling and a 15° clearance angle for durable cutting edges; order directly via Metav Werkzeuge or contact our technical consultants for application advice. ADMT120430R-F56 WSM45X — Fräswendeschneidplatte (Parallelogram 85°, 15° clearance) »Walter Tools« The ADMT120430R-F56 WSM45X is a coated indexable milling insert designed for shoulder and side milling of stainless steels and heat‑resistant superalloys, offering high cutting-edge stability and reliable chip control Coated carbide grade WSM45X for tough materials Parallelogram 85° form for shoulder and side milling 15° clearance angle for stable cutting edges F56 chipbreaker optimised for stainless steel Long tool life through tailored grade and coating The WSM45X grade is a coated cemented carbide specifically formulated for machining stainless steels and heat‑resistant superalloys. Its composition prioritises heat resistance and stable chip formation, reducing the risk of built-up edge and frequent edge changes. In practice, this means longer intervals between indexing and lower tooling costs per component while maintaining consistent cutting performance under elevated temperatures. Geometry that improves surface quality and process reliability The parallelogram 85° form combined with a 15° clearance angle ensures controlled cutting engagement and predictable force direction, which contributes to a more consistent surface finish and reduced vibration in shoulder milling operations. The insert’s corner radius supports a defined cutting edge for transferable feed rates, permitting conservative process windows that favour repeatability and predictable component quality. Efficient handling and economic operation in production As an indexable insert, the item simplifies tool management: damaged edges can be rotated instead of replacing the whole cutter, lowering tool inventory costs and minimising machine downtime. The F56 chipbreaker is tuned for secure chip segmentation in ductile, work‑hardening materials, supporting steady chip evacuation and helping to avoid problematic entanglement at high feed rates. Recommended applications and material guidance This insert is suitable for applications where stainless steels and high‑temperature alloys demand robust cutting edges and consistent chip control. The design is particularly effective for shoulder milling and side milling operations in production and job‑shop environments where process stability and predictable tool life are decisive for throughput and part quality. For application-specific recommendations based on Walter Tools' coated grade WSM45X, contact Metav Werkzeuge for expert guidance and material-matched tooling solutions Technical data Article number: ADMT120430R-F56-WSM45X-WALTER Product type: Fräswendeschneidplatte Designation: ADMT120430R-F56 WSM45X Grade / series: WSM45X — Walter Schneidstoffsorte - Serie offen Execution: T Tolerance class: M Numbers / core technical data Shape: Parallelogram 85° Plate size: 12 mm Plate thickness: 4 mm Corner radius: 3 mm Clearance angle: 15° Chipbreaker: F56 Designs / special features Coated cemented carbide (WSM45X) Optimised for stainless steels and heat‑resistant superalloys Parallelogram form for shoulder and side milling F56 chipformer for improved chip control FAQ What materials is this insert suited for? The ADMT120430R-F56 WSM45X is specified for stainless steels and heat‑resistant superalloys (ISO groups M and S), offering thermal stability and secure chip formation. How does the parallelogram 85° form benefit machining? The 85° form directs cutting forces suitably for shoulder and side milling, helping to achieve consistent surface quality and reduced tool vibration with the ADMT120430R-F56 WSM45X insert. What advantage does the F56 chipbreaker provide? The F56 chipbreaker on the ADMT120430R-F56 WSM45X promotes segmented chips and reliable evacuation when machining ductile, work‑hardening materials such as stainless steel. Is the insert available in different corner radii or thicknesses? The supplied SKU specifies a corner radius of 3 mm and a plate thickness equivalent to the designation; alternative geometries are available in other insert variants — please consult Metav Werkzeuge for options. Can this insert reduce overall tooling costs? By enabling multiple indexed edges and extending edge life through the WSM45X coated grade, the ADMT120430R-F56 WSM45X contributes to lower tooling cost per component and improved machine uptime. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Mark names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the named manufacturers. The offered article is an original, factory‑new product of the manufacturer.
ADMT120430R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold durability, precise geometry and efficient chip control for consistent milling performance. Order the (ADMT120430R-F56 WSP45G) directly via (Metav Werkzeuge) or ask our consultants if needed. ADMT120430R-F56 WSP45G milling insert – Tiger·tec Gold, 15° clearance (Walter Tools) The ADMT120430R-F56 WSP45G is a parallelogram milling insert designed for versatile face and shoulder milling in steel, stainless steel and heat-resistant superalloys. Tiger·tec Gold PVD coating for long tool life Parallelogram 85° form for stable milling 15° clearance angle supports secure chip flow Suitable for steel, stainless and superalloys Consistent cutting performance through modern grade technology The insert is produced in the Tiger·tec Gold family and the WSP45G grade is a PVD-coated carbide designed for tough milling tasks. This combination ensures a balance between wear resistance and toughness, reducing unexpected edge failures when machining P / M / S workpiece groups (steel, stainless steel, and heat-resistant alloys). The geometry – Parallelogram 85° – stabilises cutting forces and supports predictable tool behaviour, which helps to maintain cycle times and part quality even under variable cutting conditions. Predictable tool life and process security A clearly engineered contact geometry and the WSP45G coating system deliver improved flank and crater wear resistance, promoting longer intervals between indexings. The insert’s tolerance class M supports reproducible seating and replacement, which contributes to process repeatability on production lines. Combined with a defined 3 mm corner radius and the grade’s thermal stability, the insert is especially suited to operations where a secure cutting edge and stable chip formation are essential for throughput and reduced scrap rates. Optimised chip control and surface results The integrated F56 chipbreaker is tailored for controlled chip shaping across a wide range of conditions, reducing re-cutting and improving surface finish. The 15° clearance angle assists chip evacuation and lowers rubbing on the flank, which supports consistent surface quality and less heat transfer to the cutting edge. For milling strategies that require a mix of engagement angles, the insert’s profile and radius help to balance strength and finish without compromise. Application guidance and selection support The product is available in size designation 12 and thickness code 04, executed in the T variant for secure clamping and stability. It is recommended for general-purpose to demanding milling in steel, rostfreier Stahl (stainless steel) and nickel/titanium-based alloys where chip control and edge security are priorities. For tailored cutting data or alternative grades within the Tiger·tec series, Metav Werkzeuge’s technical team can advise on cutting speeds, feeds and ideal insert usage to match specific machine and component requirements. Contact Metav Werkzeuge today to discuss the ADMT120430R-F56 WSP45G Tiger·tec Gold milling insert and find the optimal specification for the application – technical consultants are available by e-mail or phone. Technical data Article number: ADMT120430R-F56-WSP45G-WALTER Designation: ADMT120430R-F56 WSP45G Manufacturer: Walter Tools Product type: Fräswendeschneidplatte (milling insert) Facts Size designation: 12 Thickness designation: 04 Corner radius: 3 mm Clearance angle: 15° Plate form: Parallelogram 85° Special features Grade series: Tiger·tec Gold Grade: WSP45G Chipbreaker: F56 Material suitability: P / M / S Tolerance class: M Execution: T FAQ What materials is this insert suitable for? The ADMT120430R-F56 WSP45G insert (Walter Tools) is developed for the ISO groups P, M and S, i.e. steel, stainless steel and heat-resistant superalloys/titanium. How does the Tiger·tec Gold coating benefit milling operations? Tiger·tec Gold on the WSP45G grade provides enhanced wear resistance and thermal stability, which improves tool life and process reliability when using the ADMT120430R-F56 WSP45G insert. What is the significance of the 85° parallelogram form? The parallelogram 85° shape increases rigidity in shoulder and face milling, promoting stable cutting forces and better surface quality with the ADMT120430R-F56 WSP45G. Which chipbreaker should be selected for mixed cutting conditions? The integrated F56 chipbreaker on this Walter Tools insert was chosen to provide controlled chip formation across varied engagements, making the ADMT120430R-F56 WSP45G a versatile choice. Is the corner radius suitable for finishing passes? The 3 mm corner radius on the ADMT120430R-F56 WSP45G offers a compromise between strength and finish; it is more suited to semi-finishing and robust finishing rather than ultra-fine surface-only finishing. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is original and supplied new by the manufacturer.
ADMT120432R-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of durable coated carbide and proven Tiger·tec Gold technology for consistent chip control and extended tool life; order directly via Metav Werkzeuge or consult their specialists for process optimisation. ADMT120432R-F56 WKP35G indexable milling insert for steel and cast iron — Parallelogram 85°, 3.2 mm radius — Walter Tools The ADMT120432R-F56 WKP35G is an indexable milling insert engineered for robust performance in milling applications on steel and cast iron, providing stable chip formation and reliable surface quality in diverse production environments. Tiger·tec Gold coating for extended tool life WKP35G coated carbide grade Parallelogram 85° geometry for stable milling 3.2 mm corner radius with 15° clearance High-performance grade for productive steel and cast-iron machining The insert is supplied in the WKP35G grade, a coated carbide formulation optimised for cutting both steel and cast iron according to ISO 513 groupings. The combination of substrate and the Tiger·tec Gold coating reduces flank and crater wear, which translates into more consistent cutting performance and fewer tool changes. For manufacturing planners this means predictable tool life and improved machine utilisation, helping to maintain cycle times and part tolerances in high-volume milling. Geometry engineered for stability and reliable chip control A parallelogram 85° insert shape and the integrated chipbreaker F56 work together to deliver controlled chip formation under interrupted and continuous cutting conditions. The insert’s 3.2 mm corner radius and 15° clearance support secure engagement and reduced vibration, which improves surface finish and repeatability in both finishing and semi-roughing passes. These geometric choices minimise edge chipping and ensure process security when facing variable workpiece conditions. Lower total machining costs through longer service intervals Thanks to the Tiger·tec Gold surface treatment and the wear-resistant grade, this indexable insert contributes to reduced tooling consumption and fewer machining interruptions. A stable cutting edge and consistent chip evacuation help to avoid unexpected scrap and rework, supporting a positive cost-benefit ratio across production runs. The result is a practical balance of high productivity and reduced lifecycle costs for scheduled operations. Integration and typical application scenarios Designed as a milling insert for a wide range of tool holders and cutter bodies, the component is suitable where reproducible performance on steel and cast iron is required. The design supports both roughing and finishing strategies depending on cutter geometry and process parameters; catalogue- and geometry-dependent applications determine the precise cutting window. For process engineers seeking to adapt cutting strategies, the insert’s predictable behaviour simplifies parameter selection and tool management. Contact Metav Werkzeuge for tailored application advice on the Walter Tools ADMT120432R-F56 WKP35G to optimise cycle times and maximise tool life Technical data SKU: ADMT120432R-F56-WKP35G-WALTER Label: Fräswendeschneidplatte ADMT120432R-F56 WKP35G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Core specifications Clearance angle: 15° Corner radius: 3,2 mm Insert size: 12 Thickness: 04 Insert shape: Parallelogram 85° Chipbreaker: F56 Tolerance class: M Materials & features Coating / Series: Tiger·tec Gold Grade: WKP35G Substrate / designation: P / K Suitable for: steel, cast iron Application: milling insert Execution: T FAQ What materials is this insert designed to machine? The ADMT120432R-F56 WKP35G insert is specified for machining steel and cast iron, reflecting the P and K material groups identified for the WKP35G grade. How does the Tiger·tec Gold coating benefit machining performance? The Tiger·tec Gold coating on the WKP35G grade improves wear resistance and thermal stability, which extends the usable life of the insert and supports consistent surface quality during extended production runs. What advantage does the parallelogram 85° shape provide? The parallelogram 85° geometry enhances tool rigidity and contact stability in milling operations, helping to reduce vibration and maintain a stable cutting edge for improved repeatability. Is the ADMT120432R-F56 WKP35G suitable for finishing operations? Yes, the combination of the 3.2 mm corner radius and controlled chip formation from the chipbreaker F56 makes the insert appropriate for both finishing and semi-roughing applications, depending on cutter assembly and process settings. How does the geometry support chip control in interrupted cuts? The insert’s chipbreaker design and clearance angle work together to break and evacuate chips reliably, reducing the risk of chip re-cutting and improving process security in interrupted milling conditions. Protected trademarks and product names are the property of their respective owners. Mention of brand names serves explanatory purposes only and does not imply any affiliation between our company and the listed brands. The article is an original, factory-new product of the manufacturer. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADMT120432R-F56 WKP35S Wendeplatten - Walter Tools
Benefit from a combination of high wear resistance and stable chip formation thanks to the Tiger·tec Silver coating and the WKP35S grade; ideal for machining steel and cast iron with consistent performance. Order directly via Metav Werkzeuge or consult the technical advisers for specific application guidance. ADMT120432R-F56 WKP35S milling insert — parallelogram 85° geometry, for steel and cast iron | Walter Tools The ADMT120432R-F56 WKP35S is a robust parallelogram 85° milling insert designed for productive finishing and roughing operations on steel and cast iron. Tiger·tec Silver coating for high wear resistance WKP35S grade optimised for steel and cast iron Parallelogram 85° geometry for stable cutting 15° relief angle with 3.2 mm corner radius Higher productivity through optimised grade and coating The combination of the WKP35S carbide grade and the Tiger·tec Silver coating provides a clear performance advantage during steel and cast iron machining. The encoded material pairing (P / K) indicates suitability for unalloyed and alloyed steel as well as abrasive cast iron. The coated hardmetal substrate is engineered to resist thermal and abrasive wear, which translates into longer tool life and fewer indexings per workpiece. For operations prioritising cycle-time reduction and repeatable surface quality, this pairing yields measurable efficiency gains and predictable component outcomes. Geometry that improves cutting stability and surface finish The parallelogram 85° insert geometry coupled with a 15° relief angle is configured to deliver reliable chip flow and low vibration during interrupted cuts. The 3.2 mm corner radius increases edge robustness and supports improved surface finish on medium to heavy passes. These geometrical choices reduce deflection and stabilise cutting forces, which is particularly beneficial in end milling and face milling where tool overhang or varying engagement can challenge process stability. The result is consistent dimensional accuracy and fewer scrap parts in production. Adapted to ISO-specific material groups and diverse applications Designed with ISO 513 material groups in mind, the insert is applicable across a wide range of workshop tasks. The P indication targets typical steel machining heat and chip-formation conditions, while the K rating addresses the abrasive nature and short, breaking chips of cast iron. This makes the insert suitable for both roughing and finishing sequences within a single production line, lowering tool change frequency. Explanation of terms and simple matching to workpiece material allows machining planners to make informed decisions without unnecessary trial runs. Practical integration and economic advantages With its standard insert designation and proven chipbreaker F56, the component integrates easily into established milling systems and indexable tool holders. The robust edge preparation and coating reduce unplanned downtime and support predictable maintenance intervals, contributing to lower per-part costs over production runs. The M tolerance class and execution code indicate consistent manufacturing quality, enabling repeatable performance across batches. For shops aiming to balance tool life, surface quality and throughput, this solution represents a pragmatic choice. Contact Metav Werkzeuge today to discuss toolholder compatibility and application-specific recommendations for this Walter Tools milling insert, and benefit from tailored machining advice. Technical data SKU: ADMT120432R-F56-WKP35S-WALTER Article designation: ADMT120432R-F56 WKP35S Product type: Fräswendeschneidplatte / milling insert Brand: Walter Tools Facts Size: 12 Thickness code: 04 Corner radius: 3.2 mm Relief angle: 15° Plate form: Parallelogramm 85° Chipbreaker: F56 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKP35S Material classification: P / K (steel and cast iron) Execution: T ISO designation present in article name FAQ Which materials are best machined with this insert? The ADMT120432R-F56 WKP35S insert (Walter Tools milling insert, SKU ADMT120432R-F56-WKP35S-WALTER) is optimised for steel (P) and cast iron (K) applications according to the product’s grade and coating characteristics. What benefits does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating improves wear resistance and thermal stability, extending tool life and supporting consistent surface quality when machining demanding steels and abrasive cast irons. How does the parallelogram 85° geometry influence machining? The parallelogram 85° geometry increases cutting stability and offers a predictable chip flow, which helps reduce vibration and improves finish, especially in interrupted or variable-engagement cuts. Is the corner radius suitable for finishing passes? With a 3.2 mm corner radius, the insert delivers a robust edge that supports good surface finish while also providing resistance to edge chipping under heavier loads. What does the chipbreaker F56 mean for process planning? The F56 chipbreaker is configured to manage chip formation typical of steel and cast iron under the stated conditions, facilitating controlled chips and reducing the risk of entanglement in many milling operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT120432R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
High-performance WSM35G grade combined with the Tiger‑tec Gold technology and a 15° clearance angle delivers secure chip formation and extended tool life when machining stainless steel and heat-resistant alloys; order the ADMT120432R‑F56 WSM35G milling insert directly via Metav Werkzeuge or consult our specialists for application support. ADMT120432R-F56 WSM35G milling insert — for stainless steel (Walter Tools) ADMT120432R-F56 WSM35G is a parallelogram‑form milling insert optimised for stable cutting and reliable chip control in stainless steel and high‑temperature alloys. Tiger‑tec Gold coating for long tool life WSM35G grade for stainless steel and superalloys 15° clearance angle for secure cutting performance 3.2 mm corner radius for robust edge stability Parallelogram 85° form with F56 chipbreaker Precise performance for stainless steel and demanding alloys The WSM35G grade, part of the Tiger‑tec Gold family, is a coated carbide developed for the specific demands of stainless steel (ISO group M) and heat‑resistant superalloys and titanium (ISO group S). The engineered grade promotes consistent chip formation and reduces the risk of built‑up edge, which is critical when machining materials that tend to be work‑hardening and generate high cutting temperatures. The result is a measurable improvement in machining stability and a reduction in unplanned tool changes, supporting smoother production flow and predictable process windows. Geometry and chip control that protect the cutting edge The insert’s parallelogram 85° form combines with a 15° clearance angle and a 3.2 mm corner radius to deliver a balance between edge strength and cutting accessibility. The integrated F56 chipbreaker is designed to shape and evacuate chips reliably under variable feeds and depths of cut; this helps to avoid chip recutting and protects the cutting edge from thermal and mechanical overload. Explained simply: the geometry reduces flank contact and spreads cutting forces, which extends edge life and improves surface finish compared with blunt or improperly selected geometries. Designed for productivity, repeatability and easy integration Tolerance class M and the ADMT designation ensure that this insert can be used in common ADMT‑compatible milling cutters and clamping systems, offering repeatable positioning and minimal setup variation. The Tiger‑tec Gold coating increases wear resistance and helps maintain a stable cutting edge over longer tool life, which lowers the cost per component and increases uptime. For manufacturing environments focused on consistent output and reduced rework, the combination of grade, chipbreaker and robust geometry provides a reliable, production‑orientated solution from Walter Tools. For machining stainless steel with proven productivity, contact Metav Werkzeuge for tailored recommendations and availability — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: ADMT120432R-F56-WSM35G-WALTER ISO designation: ADMT120432R-F56 WSM35G Product type: milling insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WSM35G Chipbreaker: F56 Facts Clearance angle: 15° Corner radius: 3.2 mm Plate size: 12 Plate thickness: 04 Form angle: 85° Tolerance class: M Materials & features stainless steel (ISO group M) Superalloys and Titanium (ISO group S) Coated carbide (Tiger‑tec Gold) Parallelogram 85° form F56 chipbreaker Execution: T FAQ Is this insert suitable for stainless steel? Yes. The ADMT120432R‑F56 WSM35G milling insert (SKU ADMT120432R‑F56‑WSM35G‑WALTER) is specifically formulated for stainless steel and provides stable chip control and reduced built‑up edge risk. What does the WSM35G grade indicate? WSM35G denotes a Walter Tools coated carbide grade within the Tiger‑tec Gold family; it is optimised for wear resistance and thermal stability when machining stainless steel and heat‑resistant alloys. For which cutting tasks is the F56 chipbreaker recommended? The F56 chipbreaker is intended for general milling of tough materials where controlled chip formation and safe evacuation are priorities, offering a balance between small broken chips and surface integrity. Does this insert fit standard ADMT toolholders? The ADMT ISO designation indicates compatibility with toolholders designed for ADMT inserts; the parallelogram 85° form and tolerance class M support secure indexing and repeatable positioning. What production benefits can be expected from this insert? Using the ADMT120432R‑F56 WSM35G from Walter Tools typically results in longer tool life, improved process stability and more consistent surface finish when machining stainless steel and similar alloys. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory‑new merchandise of the respective manufacturer.
ADMT120432R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the versatile WSP45G cutting grade and a robust 3.2 mm corner radius for consistent productivity and reduced tool changes; order directly via Metav Werkzeuge or request application advice from the consultants at Metav Werkzeuge. ADMT120432R-F56 WSP45G milling insert — Walter Tools, Tiger·tec Gold, for P/M/S applications The ADMT120432R-F56 WSP45G is a parallelogram milling insert designed for versatile face and shoulder milling in steels, stainless steels and heat‑resistant alloys. Tiger·tec Gold PVD coating Suitable for Steel, Stainless and Superalloys 15° clearance angle for secure cutting 3.2 mm corner radius for robust edge Maximise machining consistency and tool life with advanced coating technology The combination of Tiger·tec Gold coating and the WSP45G PVD cutting grade delivers a reliable balance between wear resistance and edge toughness. This specification reduces flank wear and supports stable chip formation, which in turn helps to maintain consistent surface finish and dimensional accuracy over longer tool life. The integrated chipbreaker F56 improves evacuation in interrupted cuts and varied feed conditions, translating into fewer insert changes and lower production interruptions. For shops prioritising uptime and repeatability, these properties lead directly to measurable productivity gains. Versatile geometry for fewer tool variants and faster set‑ups A parallelogram 85° shape combined with a 15° clearance angle and 3.2 mm corner radius offers a geometry that is easy to index and tolerant to modest set‑up deviations. These geometry choices provide secure cutting action and increased edge strength for heavier engagement or trochoidal milling approaches. The insert’s designation and form support use across the ISO material groups P / M / S — that is, unalloyed and alloyed steels, stainless steels and high‑temperature alloys or titanium — reducing the need to keep multiple specialised grades in stock and simplifying tooling logistics. Improve process economics through predictable performance By choosing an insert that emphasises both coating performance and edge stability, process windows remain wider and less sensitive to slight variances in machine condition or workpiece material. The WSP45G grade is formulated to resist build‑up edge on stainless steels and to maintain a stable cutting edge when machining heat‑resistant alloys, which helps to reduce rejects and rework. Consistent insert behaviour means fewer interventions on the machine tool, lower cost per component and better overall equipment effectiveness (OEE) for batch and single‑piece flow alike. Easy integration into existing tool systems and clear handling advantages As an indexable milling insert with established clamping geometries, this parallelogram plate integrates into standard tool holders and cutter bodies without special adapters. The ADMT120432R‑F56 WSP45G insert is suited to common milling strategies and can be employed for both roughing and finishing passes where a robust corner and stable chip control are required. For process planning, the chipbreaker and geometry simplify the explanation of expected behaviour: the chipformer reduces entanglement, while the corner radius balances edge strength and achievable surface finish, making programming and tooling decisions more straightforward. For specific application recommendations on Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored cutting data and proven set‑ups via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ADMT120432R-F56-WSP45G-WALTER Name: ADMT120432R-F56 WSP45G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Relief angle: 15° Corner radius: 3.2 mm Insert size: 12 Thickness: 04 Shape: Parallelogram 85° Special features Chipbreaker: F56 Cutting grade: WSP45G (PVD-coated carbide) Material application: P / M / S Tolerance class: M Execution: T FAQ Which materials is this insert suitable for? The ADMT120432R‑F56 WSP45G insert is suitable for material groups P (steel), M (stainless steel) and S (heat‑resistant superalloys and titanium), as indicated by the WSP45G grade. What is the corner radius and why does it matter? The insert features a 3.2 mm corner radius; this radius increases edge strength for heavy cuts and improves tool life while still allowing acceptable surface finish for many milling operations. What clearance angle does the insert have? This parallelogram insert has a 15° clearance angle, which helps to reduce rubbing on the flank and supports secure chip removal during milling. Which chipbreaker is integrated and what is its benefit? The F56 chipbreaker is incorporated to support controlled chip formation and evacuation, especially useful in mixed‑material production runs and interrupted cutting. Is the insert coated and what advantage does that provide? The insert is supplied in the Tiger·tec Gold coating technology (WSP45G), a PVD coating that improves wear resistance while maintaining edge toughness for reliable performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is original, factory‑new goods of Walter Tools.
ADMT120440L-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, an F56 chipbreaker and an 85° parallelogram geometry for consistent chip control and longer tool life; order directly via Metav Werkzeuge or request application advice from the consultants. ADMT120440L-F56 WKP35G — Fräswendeschneidplatte for Steel and Cast Iron by Walter Tools The ADMT120440L-F56 WKP35G is a coated carbide milling insert engineered for productive milling of steel and cast iron, optimised for stable chip formation and repeatable machining results Tiger·tec Gold coating for improved tool life Optimised for steel and cast iron machining 85° parallelogram shape, 15° relief F56 chipbreaker for stable chip control Consistent machining performance for ferrous materials The insert delivers reliable cutting performance across common ferrous groups, being specified for ISO groups P (steel) and K (cast iron). The WKP35G grade, belonging to the Tiger·tec Gold series, combines a wear-resistant coated carbide substrate with a coating strategy tuned for the thermal and abrasive demands of these materials. This results in extended tool life and fewer insert changes during production, which reduces downtime and supports a more economical machining sequence. Geometry and chip control that increase productivity The 85° parallelogram form factor with a 15° relief gives a balanced entry angle for stable cutting forces and predictable tool engagement. Combined with the F56 chipbreaker, the geometry promotes controlled fragmentation of swarf in both long- and short-chipping conditions, improving surface finish and decreasing the risk of workpiece damage. The 4 mm corner radius contributes to robust edge strength for interrupted cuts and helps maintain dimensional accuracy under higher feed rates. Practical benefits for shop-floor integration Tolerance class M and the standardised ISO designation ease insert identification and replacement, simplifying inventory and tool management. The insert thickness and size provide a compact, rigid cutting edge that suits modern high-velocity milling strategies. For engineers seeking process reliability, the combination of grade, chipbreaker and form reduces the need for excessive parameter experimentation; documented starting values from Walter Tools can be used as a baseline for optimisation. Explanation of technical terms and application guidance The term chipbreaker refers to a machined or ground feature on the rake face that encourages chips to curl and break; F56 denotes the specific geometry tailored for chip control under medium to heavy cutting regimes. Tiger·tec Gold is Walter Tools' multilayer coating technology that enhances resistance to abrasive wear and adhesion-related damage at elevated temperatures. These features together enable efficient bulk material removal and stable finishing passes when machining steels and cast irons. For high-productivity milling with Walter Tools' Tiger·tec Gold technology, contact Metav Werkzeuge for application-specific recommendations and availability at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: ADMT120440L-F56-WKP35G-WALTER Label: Fräswendeschneidplatte ADMT120440L-F56 WKP35G Walter Tools Manufacturer: Walter Tools ISO designation: ADMT120440L-F56 WKP35G Core dimensions Relief angle: 15° Corner radius: 4 mm Plate form: Parallelogram 85° Plate size: 12 Plate thickness: 04 Materials & special features Series: Tiger·tec Gold Grade: WKP35G Chipbreaker: F56 Material suitability: P (steel) and K (cast iron) Tolerance class: M Execution: T FAQ What materials is this insert suitable for? The insert is suitable for steel (ISO group P) and cast iron (ISO group K); the WKP35G grade and Tiger·tec Gold coating are optimised for these material families. How does the F56 chipbreaker affect machining? The F56 chipbreaker promotes reliable chip fragmentation, which improves swarf evacuation and surface finish during both roughing and finishing operations. Is the geometry suitable for interrupted cuts? Yes, the 85° parallelogram form and 4 mm corner radius provide increased edge strength and stability for interrupted or semi-interrupted milling tasks. Can this insert be used at high cutting speeds? The coating system and grade are designed to manage thermal loads typical of steel and cast iron milling; process parameters should be adjusted according to machine capability and cutting conditions. How is the insert identified for replacement? Use the ISO designation ADMT120440L-F56 WKP35G and the article number ADMT120440L-F56-WKP35G-WALTER for precise identification and restocking. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT120440L-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of durable Tiger‑tec Gold coating and the versatile WSP45G grade together with a 15° clearance angle for stable, productive milling of steel, rostfreier Stahl and heat‑resistant alloys; order the ADMT120440L-F56 WSP45G directly via Metav Werkzeuge or ask the consultants for tailored support. ADMT120440L-F56 WSP45G milling indexable insert — Tiger‑tec Gold, Walter Tools The ADMT120440L-F56 WSP45G is a PVD‑coated milling insert engineered for versatile face and shoulder milling across a wide range of materials, combining wear resistance with consistent chip formation and reliable tool life. Tiger‑tec Gold PVD coating for long life WSP45G grade for versatile milling 15° clearance for secure chip flow Parallelogram 85° geometry for accuracy Increased process efficiency through advanced grade and coating The combination of the Tiger‑tec Gold family and the WSP45G grade yields a PVD‑coated carbide solution optimised for continuous production environments. This insert is designed to extend tool life and reduce downtime by improving wear resistance and maintaining a stable cutting edge under typical milling loads. The result is measurable gains in productivity and predictable tool behaviour, which supports planning and reduces unplanned tool changes. Reliable chip control and suitability for demanding materials Equipped with the F56 chipbreaker and formulated for use on steel, rostfreier Stahl and superalloys/titanium, this insert promotes reproducible chip formation and evacuation. The engineered chip control reduces the risk of build‑up on the cutting edge and helps maintain surface quality during interrupted and continuous cuts. For users seeking process security when working with tough or heat‑sensitive alloys, the WSP45G grade offers the necessary balance between toughness and wear resistance. Geometry that delivers repeatable accuracy and edge stability The parallelogram 85° shape combined with a 15° clearance angle and a corner radius 4 provides stable engagement and reliable positional accuracy when indexing. This geometry supports low‑vibration performance and consistent contact conditions, which translates into improved surface finish and dimensional repeatability. The insert thickness and form are tuned for common milling setups, making it straightforward to integrate into existing toolholders. Selection and integration for production environments As part of the Tiger‑tec Gold series, this insert fits toolrooms aiming for predictable cycle times and consistent component quality. Choosing the right insert grade and chipbreaker reduces trial‑and‑error and shortens setup times, particularly when standardising on a family of grades across machining centres. For application advice, cutting data or optimisation tips related to specific alloys, technical guidance is available to support implementation and process tuning. Contact Metav Werkzeuge to discuss cutting data, toolholder compatibility and how the Walter Tools ADMT120440L-F56 WSP45G insert can improve production consistency; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ADMT120440L-F56-WSP45G-WALTER Label: Fräswendeschneidplatte ADMT120440L-F56 WSP45G Walter Tools Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger‑tec Gold Core data Insert size: 12 Thickness: 04 Clearance angle: 15° Corner radius: 4 Shape: Parallelogramm 85° Chipbreaker: F56 Tolerance class: M Special features Grade: WSP45G (PVD, coated carbide) Material suitability: P / M / S (steel / rostfreier Stahl / superalloys & titanium) Execution: T Designed for consistent chip control and stable edge life Part of Tiger‑tec Gold family for productive milling FAQ What materials can this insert machine? The ADMT120440L-F56 WSP45G insert is specified for machining steel, rostfreier Stahl and superalloys/titanium, reflecting the intended application scope of the WSP45G grade. How does the Tiger‑tec Gold coating benefit operations? The Tiger‑tec Gold coating on this milling insert improves wear resistance and thermal stability, which helps prolong tool life and maintain consistent surface quality over longer runtimes. What geometric features support accuracy? The parallelogram 85° shape together with a 15° clearance and a corner radius of 4 deliver stable engagement, helping to reduce vibration and support repeatable dimensional accuracy with this milling insert. Is this insert suitable for high‑speed milling? The WSP45G grade and Tiger‑tec Gold coating are formulated to offer robust performance across varied cutting speeds; specific cutting data should be confirmed for the targeted operation and workpiece material. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. It is an original factory‑new article of the manufacturer Walter Tools.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com