Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
ADMT120440R-F56 WKP35G Wendeplatten - Walter Tools
Efficient machining of Stahl and Gusseisen is achieved through the combination of the Tiger‑tec Gold coating and the WKP35G grade, delivering consistent wear resistance and predictable tool life; the parallelogram 85° form and F56 chipbreaker ensure stable chip control and repeatable surface quality. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. ADMT120440R-F56 WKP35G – indexable milling insert, Tiger‑tec Gold, for Stahl and Gusseisen (Walter Tools) The ADMT120440R-F56 WKP35G is an indexable milling insert designed for versatile milling in Stahl and Gusseisen, combining a wear‑resistant grade with a geometry optimised for stable chip formation. Tiger·tec Gold coating for extended life Precision parallelogram 85° geometry F56 chipbreaker for reliable chip control Suited for Stahl and Gusseisen applications Maintain steady productivity with a wear‑resistant coating The combination of the Tiger‑tec Gold technology and the WKP35G carbide grade provides a high level of thermal and abrasive resistance, which translates directly into longer tool life and fewer indexings during production. Because the grade is a coated carbide, it tolerates the elevated temperatures and varied chip formation encountered when machining Stahl and Gusseisen, so cycle times remain predictable and tool changes are less frequent. This results in a measurable increase in machine uptime and contributes to process stability in both roughing and semi‑finishing operations. Accurate geometry that secures surface quality and chip control The insert’s parallelogram 85° form and 15° relief angle deliver reliable cutting edge engagement and a secure seating in compatible toolholders, while the 4 corner radius adds robustness for interrupted cuts and moderate depths of cut. The integrated F56 chipbreaker is engineered to produce consistent chip segmentation, reducing the risk of long, entangling swarf and improving evacuation from the cut. As a result, surface finish and dimensional repeatability are supported even under varying cutting conditions, reducing rework and inspection demands. Simple integration and reliable process performance With tolerance class M and execution T, the insert fits into standard indexable milling holders and aligns with common tool‑building practices to shorten setup times. The designation and dimensions allow straightforward replacement and inventory handling across batches. The grade’s focus on both Stahl and Gusseisen applications makes tooling strategies simpler: a single insert family covers a broad material range, lowering tooling complexity. For customers seeking application support or verification of suitability for a specific programme, Metav Werkzeuge’s consultants can assist with cutting data and holder selection to secure optimal performance and cost‑efficiency. Contact Metav Werkzeuge for tailored cutting data and to secure the ADMT120440R-F56 WKP35G for stable, high‑productivity milling in Stahl and Gusseisen Technical Data SKU: ADMT120440R-F56-WKP35G-WALTER Article: ADMT120440R-F56 WKP35G Product type: Indexable milling insert Series: Tiger‑tec Gold Grade: WKP35G Material application: P / K Manufacturer: Walter Tools Core dimensions Plate size: 12 Thickness: 04 Corner radius: 4 Relief angle: 15° Form: Parallelogram 85° Chipbreaker: F56 Tolerance class: M Execution: T Special features Coated carbide grade (beschichtetes Hartmetall) Designed for Stahl machining Designed for Gusseisen machining Stable chip control and predictable wear Suitable for roughing and semi‑finishing operations Series/grade description: Tiger‑tec Gold / WKP35G FAQ What materials is this insert suitable for? The ADMT120440R-F56 WKP35G is suitable for machining Stahl and Gusseisen, the WKP35G grade being optimised for the thermal and abrasive conditions typical of these material groups. How does the Tiger‑tec Gold technology benefit tool life? Tiger‑tec Gold coating increases wear resistance and thermal stability on the ADMT120440R-F56 WKP35G, which leads to longer service intervals and more consistent cutting performance. Which chipbreaker is integrated and what advantages does it provide? The insert features the F56 chipbreaker, engineered to produce predictable chip segmentation and good evacuation, reducing swarf‑related disruptions during milling. Is the insert compatible with standard toolholders? Yes, the geometry (parallelogram 85° form, tolerance class M, execution T) of this indexable milling insert matches common holders; confirmation for specific holders can be provided by Metav Werkzeuge. What benefits does the corner radius offer? The 4 corner radius on this insert increases edge strength for interrupted cuts and supports smoother transitions, improving surface finish and tool robustness in demanding operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADMT120440R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, controlled chip formation and a robust insert geometry for stable, productive milling cycles; order directly via Metav Werkzeuge or consult our specialists for process optimisation and application advice. ADMT120440R-F56 WKP35S milling insert — Parallelogram 85°, Tiger·tec Silver, Walter Tools ADMT120440R-F56 WKP35S is a parallelogram-shaped indexable milling insert designed for high-productivity machining of steel and cast iron in general milling operations Tiger·tec Silver coating for high wear resistance WKP35S grade optimised for Stahl and cast iron F56 chipbreaker for controlled chip formation 15° relief angle with 4 mm corner radius Longer tool life through advanced coating technology The combination of the Tiger·tec Silver coating and the WKP35S carbide grade gives a marked increase in tool life under typical milling conditions. The coating reduces abrasive and thermal wear, which means fewer insert changes and longer uninterrupted production runs. For operations that process steel and cast iron, this equates to lower tooling costs per workpiece and less machine downtime. The designation signals a coated carbide solution optimised for the heat and chip behaviour associated with these material groups. Stable chip control for safer, faster machining The F56 chipbreaker is engineered to produce predictable, segmented chips during milling, which reduces the risk of entanglement and improves evacuation in continuous processes. Combined with the parallelogram shape and the Parallelogram 85° geometry, the insert facilitates secure clamping in standard tool holders and a stable cutting engagement. In practical terms, this means higher feed rates are feasible while maintaining process reliability and surface integrity on the workpiece. Geometry tuned for precision and repeatability A 15° relief angle paired with a 4 mm corner radius provides a balance between edge strength and dimensional control. The corner radius supports robust cutting edges for interrupted cuts and roughing passes, while the relief angle helps reduce rubbing and built-up edge. This geometry supports consistent component tolerances and predictable tool behaviour across batches, aiding in first-pass accuracy and reducing secondary operations. Application scope and process guidance The insert is specified for machining in the ISO groups P (for steel) and K (for cast iron). The coated carbide composition and chipbreaker choice make it suitable for a broad range of steels—from unalloyed to alloyed grades—and for abrasive, brittle cast-iron materials where short, breaking chips are common. For best results, select a matching cutter body rated for parallelogram-shaped inserts and follow the holder manufacturer’s recommendations for speeds and feeds based on workpiece alloy and rigidity. For secure procurement and application advice on Walter Tools inserts such as this ADMT120440R-F56 WKP35S, contact Metav Werkzeuge for tailored recommendations and ordering support Technical data Article number: ADMT120440R-F56-WKP35S-WALTER Designation: ADMT120440R-F56 WKP35S Brand: Walter Tools Core data Relief angle: 15° Corner radius: 4 mm Insert size: 12 Thickness designation: 04 Chipbreaker: F56 Tolerance class: M Shape: Parallelogram 85° Special features Coating: Tiger·tec Silver Grade: WKP35S (coated carbide) Suitable for: Stahl (ISO P), cast iron (ISO K) Series: Tiger-tec Silver FAQ What materials is this insert suitable for? The ADMT120440R-F56 WKP35S insert is intended for machining steel (ISO P) and cast iron (ISO K); the WKP35S grade and Tiger·tec Silver coating are matched to those material groups. What does the F56 chipbreaker do? The F56 chipbreaker promotes controlled, segmented chips to improve evacuation and reduce the risk of chip-related interruptions when using the ADMT120440R-F56 WKP35S in continuous milling operations. How does the Tiger·tec Silver coating benefit productivity? Tiger·tec Silver minimises abrasive and thermal wear, extending insert life and enabling longer production runs with consistent cutting performance for inserts such as the ADMT120440R-F56 WKP35S. Is the geometry suited for interrupted cuts? Yes, the combination of a 15° relief angle and a 4 mm corner radius gives the insert robust edge strength, making it appropriate for interrupted and heavy milling passes. Which series and grade does this insert belong to? This is part of the Tiger-tec Silver series and uses the WKP35S coated-carbide grade, specifically formulated for a broad range of Stahl and cast-iron applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
ADMT120440R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WSM35G grade for secure machining of stainless steels and heat-resistant superalloys; the insert’s parallelogram 85° form and F56 chipbreaker provide reliable chip control and repeatable performance. Order the insert directly via Metav Werkzeuge or consult our technical team for application-specific advice. ADMT120440R-F56 WSM35G milling indexable insert — Tiger·tec Gold for stainless steels and superalloys (Walter Tools) The ADMT120440R-F56 WSM35G is a milling indexable insert engineered for demanding machining of rostfreier Stahl and heat-resistant superalloys, combining a robust coated carbide grade with a geometry optimised for stable cutting. Tiger·tec Gold coating for thermal and wear resistance WSM35G grade for stainless steels and superalloys Parallelogram 85° form for secure clamping F56 chipbreaker for controlled chip formation Maximise process stability with a temperature‑resistant coating The insert’s Tiger·tec Gold coating provides enhanced thermal protection and wear resistance during interrupted cuts and elevated cutting temperatures. This coated carbide technology reduces flank wear and supports consistent cutting forces, which translates into fewer tool changes and improved machine uptime. For applications involving rostfreier Stahl the coating assists in preventing build‑up at the edge, supporting a stable cutting edge and more predictable component quality. Reliable edge life and predictable chip control The WSM35G grade is formulated for the mechanical and thermal challenges of stainless steels and superalloys (ISO groups M and S). Combined with the F56 chipbreaker, this grade promotes secure chip formation and evacuation, reducing the risk of edge collapse and surface damage. The result is a measurable improvement in productivity when machining sticky, work‑hardening materials, offering an economical balance between tool life and cutting performance. Geometry designed for secure clamping and repeatability The parallelogram 85° plate form and the specified clearance angle of 15° deliver a stable seating and positive engagement in most milling cutters. The design enhances radial cutting stability and helps maintain a consistent cutting line during heavy engagement. The insert’s tolerance class M and the defined corner radius support repeatable indexing and accurate pocket fit, making fixture setup and tool changes straightforward in production environments. Application scope and material compatibility explained This indexable plate is intended primarily for machining rostfreier Stahl and high‑temperature alloys; the designation S / M indicates suitability for heat‑resistant superalloys and stainless steels per ISO 513 classifications. Where workpieces exhibit high ductility or poor thermal conductivity, the combination of grade, coating and chipbreaker assists in controlling contact temperatures and preserving the cutting edge—leading to consistent surface finish and dimensional stability in series production. Contact Metav Werkzeuge for specific recommendations, availability and compatibility checks for Walter Tools ADMT120440R-F56 WSM35G — info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: ADMT120440R-F56-WSM35G-WALTER ISO designation: ADMT120440R-F56 WSM35G Brand: Walter Tools Series: Tiger·tec Gold Grade: WSM35G Product type: Milling indexable insert Form: Parallelogramm 85° Chipbreaker: F56 Core specifications Size: 12 Thickness: 04 Corner radius: 4 Clearance angle: 15° Tolerance class: M Material suitability: S / M Features Coating: Tiger·tec Gold Suitable for: rostfreier Stahl and heat‑resistant superalloys Application focus: heavy or difficult‑to‑machine materials Execution: T FAQ What materials is this insert suitable for? The ADMT120440R-F56 WSM35G is specified for rostfreier Stahl (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), reflecting its S / M suitability. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold coating on this Walter Tools insert increases thermal resistance and wear protection, improving edge life during elevated temperature machining. How does the F56 chipbreaker affect machining? The F56 chipbreaker offers controlled chip formation and evacuation, which helps maintain stable cutting forces and reduces the risk of build‑up and surface defects. Which geometry ensures secure holder engagement? The parallelogram 85° form together with a 15° clearance angle gives a positive seat and good clamping stability for repeatable milling operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT120440R-F56 WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of the combination of WSM45X coated carbide for tough materials, a F56 chipbreaker for controlled chip formation and the stable parallelogram 85° geometry to maintain productivity in stainless and high-temperature alloy milling; order directly via Metav Werkzeuge or consult our specialists for application support. ADMT120440R-F56 WSM45X Fräswendeschneidplatte by Walter Tools — F56 chipbreaker, 15° clearance, 4 mm corner radius The ADMT120440R-F56 WSM45X is a parallelogram-shaped indexable milling insert designed for heavy-duty machining of stainless steels and heat-resistant alloys in industrial milling operations WSM45X coated carbide for tough alloys Parallelogram 85° geometry for versatile milling 15° clearance angle for stable cutting F56 chipbreaker for controlled chip formation Efficient cutting for tough, heat‑generating materials The WSM45X grade is a coated carbide designed specifically for machining materials that tend to produce built-up edge and high cutting temperatures. As such, the insert offers stable chip formation and improved edge life when facing the demands of rostfrei (stainless) grades and superalloys. The combination of coating and substrate reduces wear and supports longer tool life, translating into fewer tool changes and higher process uptime for production environments where consistency is essential. Geometry that supports reliable milling performance The parallelogram 85° geometry with a 15° clearance delivers a stable engagement angle for face and shoulder milling, while the corner radius 4 helps distribute cutting forces to avoid premature chipping. The F56 chipbreaker is engineered to break and evacuate chips efficiently during interrupted cuts and when machining ductile, work‑hardening materials. Together, these design elements promote predictable results and a regular surface finish, reducing the need for rework in assembly or downstream operations. Practical benefits for workshop productivity Integrating this insert into milling cutters offers measurable gains: improved process reliability when handling challenging alloys, reduced frequency of tool replacement thanks to the WSM45X grade, and better chip control due to the tailored chipbreaker geometry. For manufacturers aiming to raise throughput without compromising finish quality, the insert supports steady cutting conditions and repeatable performance across batches — an advantage in both prototyping and serial production. Material suitability and application overview The insert is recommended for stainless steels and for heat‑resistant superalloys and titanium alloys where thermal resistance and edge stability are critical. The combination of substrate and coating in the WSM45X grade is suited to the specific demands of these ISO material groups, helping to mitigate common issues such as edge build‑up and rapid flank wear. Operators and process engineers will find the insert particularly useful where consistent tool life and chip control are priorities. Contact Metav Werkzeuge for tailored advice on integrating Walter Tools inserts into the machining process — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss cutter compatibility and optimal cutting parameters Technical data SKU: ADMT120440R-F56-WSM45X-WALTER Article designation: ADMT120440R-F56 WSM45X Manufacturer: Walter Tools Core data Plate size: 12 Plate thickness: 04 Corner radius: 4 Clearance angle: 15° Plate form: Parallelogramm 85° Tolerance class: M Special features Coating: coated carbide (WSM45X) Chipbreaker type: F56 Series: Walter Schneidstoffsorte - Serie offen Suitable for: stainless steels; heat‑resistant superalloys and titanium (ISO groups M and S) Material designation: S / M FAQ Which materials are suitable for this insert? The ADMT120440R-F56 WSM45X insert is intended for stainless steels and heat‑resistant superalloys (ISO groups M and S), offering thermal stability and edge resistance for such materials. What advantages does the WSM45X grade provide? WSM45X is a coated carbide grade optimised for stable chip formation and improved wear resistance when machining tough, heat‑generating materials, extending effective tool life. How does the F56 chipbreaker affect machining? The F56 chipbreaker controls chip shape and evacuation during interrupted or ductile cutting, reducing entanglement and improving surface quality. Is the geometry suitable for general milling cutters? Yes; the parallelogram 85° geometry with a 15° clearance provides a versatile stance for face and shoulder milling, balancing entry forces and chip flow for productive cuts. Can this insert be used on titanium alloys? The insert is suitable for heat‑resistant superalloys and titanium when processed under appropriate cutting parameters; the WSM45X grade supports edge stability in such applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT120440R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the durable Tiger·tec Gold coating and a robust 4 mm nose radius for extended tool life and steady chip formation; combined with the Parallelogram 85° geometry this insert supports reliable milling cycles. Order the ADMT120440R-F56 WSP45G milling insert directly via Metav Werkzeuge or consult our application specialists for tailored recommendations. ADMT120440R-F56 WSP45G milling insert — Tiger·tec Gold, Walter Tools The ADMT120440R-F56 WSP45G is a PVD-coated milling insert designed for versatile machining tasks across steel, stainless steel and heat-resistant alloys. Tiger·tec Gold PVD coating for durability Suitable for steel, stainless steel and superalloys Parallelogram 85° form with 15° relief 4 mm nose radius for robust cutting edge Engineered for consistent performance and longer tool life This PVD-coated grade from the Tiger·tec Gold family delivers consistent wear resistance and thermal stability. The WSP45G carbide formulation is tailored to the thermal and mechanical demands of milling operations on steel, stainless steel and superalloys, reducing the risk of build-up and premature flank wear. The integrated F56 chipbreaker promotes controlled chip formation, which lowers cycle interruptions and contributes to more predictable machining results. Engineers and production planners will value the balance between edge stability and versatility that this insert provides. Faster, more reliable machining through optimised geometry The insert’s Parallelogram 85° shape and 15° relief angle offer reliable entry and exit behaviour in radial and axial milling passes, while the 4 mm nose radius supports higher feed rates and smoother surface finishes where a robust cutting edge is required. Together these features improve process stability and can reduce the frequency of tool changes, supporting higher overall equipment effectiveness. For workshops targeting repeatable part quality, the geometry and chip control features translate directly into improved throughput and lower rework rates. Practical compatibility and application guidance Designed for use in standard indexable milling toolholders that accept parallelogram inserts, this grade suits a wide range of general and demanding milling tasks. The ADMT120440R-F56 WSP45G excels where a combination of toughness and heat resistance is needed, for example in interrupted cuts or workpieces with variable material batches. For selection and cutting parameter advice, pairing the insert’s characteristics with appropriate cutter types and coolant strategies yields the best outcomes; Metav Werkzeuge’s consultants can advise on specific toolholder pairings and feeds to match production goals. Contact Metav Werkzeuge for tailored tool recommendations and to secure Walter Tools Tiger·tec Gold inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ADMT120440R-F56-WSP45G-WALTER Designation: ADMT120440R-F56 WSP45G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSP45G Core data Form: Parallelogram 85° Relief angle: 15° Corner radius: 4 mm Size: 12 Thickness: 04 Tolerance class: M Chipbreaker: F56 Material code: P / M / S Features & applications PVD-coated carbide (Tiger·tec Gold) Suitable for steel, stainless steel and superalloys Robust cutting edge and stable chip control Versatile for various milling operations FAQ What materials is this insert suitable for? The ADMT120440R-F56 WSP45G is specified for machining steel, stainless steel and heat-resistant superalloys, reflecting the P / M / S designation of the Tiger·tec Gold grade. How does the F56 chipbreaker affect machining? The F56 chipbreaker on the ADMT120440R-F56 WSP45G promotes controlled chip formation and evacuation, improving process stability and reducing interruptions in continuous milling operations. Which cutter geometry suits this insert? Parallelogram-style cutter bodies that accept 85° inserts are the recommended match; the insert’s Parallelogram 85° shape and 15° relief deliver stable engagement for radial and axial milling passes. Is this insert a good choice for interrupted cuts? Yes—the combination of the Tiger·tec Gold coating and the 4 mm nose radius on the ADMT120440R-F56 WSP45G supports toughness and edge stability required for interrupted or variable-cut conditions. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names mentioned are the property of their respective owners. Brand names are used for explanation only and do not indicate any affiliation between our company and the respective manufacturers. The offered item is original, brand-new goods of the manufacturer (Walter Tools).
ADMT160608L-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of a Tiger·tec Gold cutting grade and the WKP35G wear resistance together with precise chip control from the F56 breaker for dependable productivity. Benefit from the parallelogram 85° geometry and 15° clearance for stable engagement and consistent surface finish; order the insert directly via Metav Werkzeuge or consult the team for application advice. ADMT160608L-F56 WKP35G milling insert — Parallelogram 85°, 15° clearance | Walter Tools The ADMT160608L-F56 WKP35G is a solid, indexable milling insert engineered for efficient machining of steel and cast iron in general milling applications. Tiger·tec Gold for extended tool life WKP35G grade tuned for steel and cast iron Parallelogram 85° geometry for stable cutting F56 chipbreaker for controlled chip formation High-performance grade for demanding materials The ADMT160608L-F56 WKP35G combines the Tiger·tec Gold coating technology with the WKP35G carbide grade to provide a durable cutting edge suited to ISO groups P (steel) and K (cast iron). This composition ensures improved wear resistance and consistent edge integrity under typical milling temperatures. The result is fewer indexings and longer intervals between tool changes, which supports higher throughputs and lowers per-part tooling cost. Geometry that increases process stability and surface quality The insert’s parallelogram 85° shape and 15° clearance promote a predictable cutting angle and reduced radial forces during engagement. A 0.8 mm corner radius supports a balance between robustness and the ability to generate a good surface finish, while the plate size code 16 and thickness code 06 are compatible with common milling body interfaces. These geometric choices contribute to stable chip formation and improved dimensional consistency on the workpiece. Controlled chip flow for reliable productivity Equipped with the F56 chipbreaker, the insert is designed to split and evacuate chips efficiently when machining steels and cast irons. Controlled chip formation reduces the risk of re-cutting and tool interference, leading to fewer interruptions and a smoother production rhythm. Process security is enhanced by the repeatable behaviour of the chipformer, which supports predictable cycle times and stable tool life. Practical advantages for workshop operations Selection of this indexable insert supports efficient machine utilisation: the combination of grade, coating and chipbreaker reduces wear-related downtime, and the insert geometry eases programming and fixture demands. For shops seeking to standardise tooling across mixed steel and cast-iron jobs, the insert offers a pragmatic compromise between wear performance and cutting stability. If additional technical details or specific application data are required, Metav Werkzeuge provides dedicated advice and material-specific recommendations. Contact Metav Werkzeuge for application-specific recommendations and to secure Tiger·tec Gold inserts from Walter Tools Technical data Article number: ADMT160608L-F56-WKP35G-WALTER Designation: ADMT160608L-F56 WKP35G Product type: Fräswendeschneidplatte (milling insert) Manufacturer: Walter Tools Facts Plate size: 16 Thickness code: 06 Free angle: 15° Plate form: Parallelogramm 85° Corner radius: 0.8 Special features Series: Tiger·tec Gold Grade: WKP35G Chipbreaker: F56 Tolerance class: M Substrate/coating: coated carbide Material suitability: P (steel), K (cast iron) Execution: T FAQ What materials is this insert suitable for? The ADMT160608L-F56 WKP35G insert is specified for ISO groups P and K, meaning it is suitable for a range of steels and cast irons. Which chipbreaker is integrated and what is its benefit? The insert features the F56 chipbreaker, which is designed to produce short, controlled chips and improve evacuation during milling operations. How does the Tiger·tec Gold series affect tool life? Tiger·tec Gold coating on the WKP35G grade enhances wear resistance and edge stability, which typically extends the productive life of the insert under standard machining conditions. What advantages does the parallelogram 85° form provide? The parallelogram 85° geometry offers a stable cutting engagement and favourable force distribution, contributing to improved surface finish and reduced vibration. Is the insert compatible with common milling bodies? The plate size code 16 and thickness code 06 align with widespread holder designs; compatibility should be confirmed against the specific toolholder drawing. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and product names are the property of their respective owners and are mentioned here for explanatory purposes only; no affiliation between our company and those manufacturers is implied.
ADMT160608L-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of productivity, reliable chip control and consistent tool life for stable milling results; the technical design minimises machine downtime and simplifies process planning — order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. ADMT160608L-F56 WKP35S indexable milling insert, Tiger‑tec Silver, for steel & cast iron — Walter Tools The ADMT160608L-F56 WKP35S is an indexable milling insert engineered for productive face and shoulder milling of steel and cast iron, combining a Tiger‑tec Silver coating with a dedicated F56 chipbreaker for dependable chip control. Tiger‑tec Silver coated carbide grade WKP35S Effective F56 chipbreaker for dependable chips 15° relief angle for stable cutting geometry Parallelogram 85° form with 0.8 mm corner radius Stable machining performance for steel and cast iron The combination of Tiger‑tec Silver coating and the WKP35S grade provides a balance between wear resistance and toughness that suits the thermal and mechanical demands of machining steel (P) and cast iron (K). The integrated F56 chipbreaker is configured to produce controlled, less tangled chips during typical cutting conditions, reducing the risk of rework and improving process reliability. This geometry and coating pairing helps maintain consistent cutting forces, which contributes to predictable tool life and more repeatable part quality in batch and serial production. Improved edge life and process security through geometry and coating A 15° relief angle combined with the parallelogram 85° form gives a robust cutting edge orientation that resists chipping under intermittent loads, while the 0.8 mm corner radius provides a compromise between edge strength and surface finish. The coated cemented carbide substrate resists abrasive wear and sustains the cutting edge at elevated temperatures, resulting in fewer tool changes and more stable cycle times. For operations where machining stability and repeatable performance are priorities, this insert supports a high degree of process control and reduced scrap rates. Practical integration and productivity gains on the shop floor The insert’s standard form and dimensional coding facilitate straightforward replacement in compatible toolholders, enabling rapid index changes and minimal setup time. By focusing on reliable chip formation and robust edge geometry, the design supports higher material removal rates without compromising surface integrity. For production planners, the predictable behaviour of the grade and chipbreaker simplifies feed and speed selection and lowers the risk associated with introducing new programs. For operators, the familiar geometry shortens setup learning curves and reduces variation between shifts. Choose the Walter Tools ADMT160608L-F56 WKP35S when consistent chip control and dependable tool life are required — contact Metav Werkzeuge for detailed application advice and availability Technical data Article number: ADMT160608L-F56-WKP35S-WALTER Product type: Fräswendeschneidplatte Brand: Walter Tools Series: Tiger‑tec Silver Grade: WKP35S Facts Relief angle: 15° Corner radius: 0.8 mm Plate form: Parallelogram 85° Plate size: 16 Plate thickness: 06 Chipbreaker: F56 Tolerance class: M Special features Coating: Tiger‑tec Silver Material base: coated cemented carbide Applicable material groups: P (steel), K (cast iron) Execution: T ISO designation: ADMT160608L-F56 WKP35S FAQ Which materials is this insert suitable for? The ADMT160608L-F56 WKP35S is specified for machining steel (P) and cast iron (K) according to the ISO material groups noted for the grade. What chip control can be expected from the insert? The F56 chipbreaker on this insert is designed to deliver reliable chip formation and evacuation for common turning and face-milling conditions in its target material groups. How does the geometry affect edge stability and finish? The parallelogram 85° form with a 0.8 mm corner radius and 15° relief angle increases edge robustness under varying loads while supporting consistent surface quality where moderate radii are suitable. What is the coating and how does it influence performance? The Tiger‑tec Silver coating on the WKP35S grade enhances wear resistance and thermal stability, improving consistency of edge life across series production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are used for explanatory purposes only. There is no association between our company and the mentioned brands. The offered item is original factory‑new goods of the manufacturer Walter Tools.
ADMT160608L-F56 WSP45G T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a versatile WSP45G grade and a robust parallelogram 85° geometry to achieve reliable chip control and extended tool life in mixed-material milling. Order the ADMT160608L-F56 WSP45G milling insert directly via (Metav Werkzeuge) or ask our consultants if needed. ADMT160608L-F56 WSP45G milling insert — Tiger·tec Gold, for steels, stainless steels and superalloys (Walter Tools) The ADMT160608L-F56 WSP45G is a parallelogram milling insert designed for versatile finishing and roughing operations in steels, stainless steels and heat-resistant superalloys, combining a 15° clearance and an optimised chipbreaker for stable machining Tiger·tec Gold PVD coating Suitable for steel, stainless steels and superalloys Parallelogram 85° for axial reach Stable cutting edge and chip control Consistent performance across mixed materials The combination of the Tiger·tec Gold coating with the WSP45G grade creates a wear-resistant surface that supports stable cutting edges under varying thermal loads. This makes the insert particularly effective when machining groups P, M and S — that is, unalloyed and alloyed steel, stainless steel and superalloys or titanium. The PVD-layering increases heat resistance and reduces adhesion at the cutting edge, which translates into more predictable tool life and reduced downtime. For process planners, the result is improved component consistency and fewer in-process interruptions. Geometry that promotes process stability and chip control The parallelogram shape at an 85° lead angle together with a 15° clearance ensures good axial reach and favourable cutting direction for shoulder milling and light face operations. The 0.8 mm corner radius increases edge strength for interrupted cuts and helps avoid premature chipping, while the F56 chipbreaker supports controllable chip formation in a wide range of feeds. These geometry choices reduce vibration sensitivity and improve surface finish, which supports higher first-pass yields in production environments. Economical machining through advanced grade and tooling concept The WSP45G grade is engineered as a tough, versatile PVD-coated carbide suitable for a broad spectrum of milling applications. Its formulation balances toughness and wear resistance to suit both finishing and medium-duty roughing, thereby offering a rentable compromise between performance and cost per part. The insert’s tolerance class M and consistent dimensional stability support repeatable clamping and predictable tool offsets, which aids CAM programmers and shop-floor operators in maintaining cycle-time targets. Contact Metav Werkzeuge for application advice, availability and ordering of Walter Tools' ADMT160608L-F56 WSP45G milling insert — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: ADMT160608L-F56-WSP45G-WALTER Designation: ADMT160608L-F56 WSP45G Manufacturer: Walter Tools Facts Plate size: 16 Plate thickness: 06 Corner radius: 0.8 mm Relief angle: 15° Plate form: Parallelogram 85° Tolerance class: M Special features Grade: WSP45G (Tiger·tec Gold) Chipbreaker: F56 Execution: T Material applicability: P / M / S Series: Tiger·tec Gold FAQ What materials can this insert machine effectively? The ADMT160608L-F56 WSP45G milling insert (Walter Tools, SKU ADMT160608L-F56-WSP45G-WALTER) is suitable for machining steel (P), stainless steels (M) and heat-resistant superalloys or titanium (S). How does the Tiger·tec Gold coating help in production? The Tiger·tec Gold PVD coating on the WSP45G grade reduces adhesion and improves thermal resistance, which contributes to longer edge life and more consistent process windows when using the insert. Which operations are best suited to the parallelogram 85° form? The parallelogram 85° geometry is advantageous for axial reach and shoulder milling tasks; it provides a favourable cutting direction for face and light profile milling with the ADMT160608L-F56 design. What is the significance of the 0.8 mm corner radius? A corner radius of 0.8 mm increases edge strength for interrupted cuts and improves resistance to chipping, helping to maintain surface quality and reduce unexpected tool changes. Is this insert supplied by a known tooling brand? The insert is a Walter Tools product from the Tiger·tec Gold series; Walter Tools is known for precision tooling and process-oriented solutions. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT160608R-D56 WAK15 Wendeplatten - Walter Tools
Benefit from productive machining of non‑ferrous materials with a combination of sharp WAK15 uncoated carbide, a D56 chipbreaker and a 15° relief angle that reduces built‑up edge and boosts cycle times; order directly via Metav Werkzeuge or consult our specialists for application advice. ADMT160608R-D56 WAK15 milling insert — Parallelogram 85°, 0.8 mm radius, Walter Tools ADMT160608R-D56 WAK15 is a milling indexable insert engineered for efficient machining of aluminium and other non‑ferrous metals in high‑productivity environments Parallelogram 85° geometry for lateral stability WAK15 uncoated carbide for aluminium machining D56 chipbreaker for clean chip formation 0.8 mm corner radius for improved edge life Maximise aluminium removal with an optimised cutting edge The ADMT160608R-D56 WAK15 insert combines a very sharp geometry and an uncoated carbide grade developed for non‑ferrous materials, producing low friction and minimised material adhesion. The 15° relief angle and the targeted rake design reduce the tendency for built‑up edge, which maintains cutting performance across longer runs and reduces secondary finishing. These technical choices translate into faster cycle times and predictable tool life when machining aluminium alloys and similar materials. Consistent surface quality and reliable edge behaviour The parallelogram 85° geometry and a 0.8 mm corner radius deliver stability at the cutting zone and a balanced engagement with the workpiece. This leads to reduced vibration and a more uniform surface finish on the component. The D56 chipbreaker is tuned for segmented, manageable chips in soft, ductile materials, supporting uninterrupted production and easier chip evacuation. Tolerance class M and the Walter N‑Series system ensure repeatable performance across tool changes and lot batches. Practical handling, inventory and process benefits As part of the Walter N‑Sortensystem, this insert simplifies tool selection for shops focused on non‑ferrous work. The standardised designation eases logistics and reordering, while the insert’s geometry reduces the need for complex setup or frequent regrinds. For production managers the result is lower downtime, fewer rejects and a more economical overall process; for operators the combination of clean chips and a stable cutting edge reduces manual intervention and cleanup between operations. Contact Metav Werkzeuge for a technical consultation on suitability for specific aluminium components or to confirm stock availability — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical Data Article number: ADMT160608R-D56-WAK15-WALTER Label: Fräswendeschneidplatte ADMT160608R-D56 WAK15 Walter Tools Product type: milling indexable insert ISO designation: ADMT160608R-D56 WAK15 Brand: Walter Tools Dimensions & Core Data Plate size: 16 mm Corner radius: 0.8 mm Relief angle: 15° Thickness designation: 06 Plate form: Parallelogram 85° Tolerance class: M Materials & Features Grade: WAK15, uncoated carbide Chipbreaker: D56 Series: Walter N‑Sortensystem Intended application: aluminium and non‑ferrous metals Material designation: N (non‑ferrous) Execution: T FAQ What materials is this insert best suited for? The ADMT160608R-D56 WAK15 insert is specifically designed for aluminium and other non‑ferrous metals, using the WAK15 carbide grade to limit material adhesion and ensure stable cutting. How does the D56 chipbreaker affect machining? The D56 chipbreaker promotes segmented, controlled chips when machining ductile materials, which improves evacuation and reduces the risk of rework due to entangled or long chips. What advantages does the parallelogram 85° shape provide? The parallelogram 85° geometry increases lateral stability and reduces vibration, contributing to consistent surface finish and extended edge life under typical milling conditions. Is the insert coated? This insert uses an uncoated carbide grade (WAK15) chosen for its sharp cutting edge and suitability for non‑ferrous machining where coatings can encourage built‑up edge. Which tool series does this insert belong to? The insert is part of the Walter N‑Sortensystem, enabling consistent grade selection and simplified inventory management for non‑ferrous applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, brand‑new product from the manufacturer.
ADMT160608R-D56 WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating, the wear-resistant WKK25G grade and an optimised D56 chipbreaker for predictable machining of cast iron; order directly via Metav Werkzeuge or request advice from the technical team to integrate the insert into existing processes. ADMT160608R-D56 WKK25G — Fräswendeschneidplatte (for cast iron) by Walter Tools — Tiger·tec Gold, D56 chipbreaker ADMT160608R-D56 WKK25G is a parallelogram milling insert designed for productive machining of abrasive cast iron components, combining a Tiger·tec Gold coating and a dedicated chip control geometry. Tiger·tec Gold coating for abrasive cast iron D56 chipbreaker for controlled short chips Parallelogram 85° form for versatile entry 0.8 corner radius for stable edge and finish Reliable performance on abrasive cast iron The WKK25G grade, applied within the Tiger·tec Gold coating family, is tailored to withstand the abrasive wear typical of cast iron. This results in a stable cutting edge and consistent flank wear behaviour, which reduces unexpected tool changes and improves uptime. The dedicated D56 chipbreaker promotes short, controllable chips when machining brittle, abrasive materials; this aids evacuaton and lowers the risk of surface damage. For production environments that prioritise throughput and repeatability, the coated carbide chemistry and chip control combine to enhance process stability and reduce overall machining cost per part. Geometry and design that improve accessibility and repeatability The insert’s parallelogram 85° form and designated 15° free angle provide a balanced contact geometry that eases entry into complex profiles and offers reliable indexability in standard toolholders. A defined 0.8 corner radius provides a compromise between edge strength and achievable surface finish: larger radii increase tool life and dampen vibrations, while still supporting good surface quality on cast components. The coded dimensions (size 16, thickness 06) ensure consistent seating and repeatable clamping, which simplifies fixture setup and contributes to predictable dimensional results across batches. Stable cutting behaviour for economical milling Coating technology from the Tiger·tec Gold series provides improved resistance to abrasive wear and maintains a sharp, stable cutting edge under intermittent cutting conditions often found when machining cast iron. The result is fewer index changes and longer intervals between insert replacements, which translates into lower tooling consumption and less machine downtime. Together with the specific chipbreaker and robust geometry, the insert supports efficient cycle times and a reliable surface integrity that helps meet quality targets with fewer interventions. Process documentation and application data from Metav Werkzeuge can be consulted to align speeds and feeds with machine and workpiece specifics. Consult Metav Werkzeuge for integration advice and application support for Walter Tools inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss process parameters and availability Technical data Article number: ADMT160608R-D56-WKK25G-WALTER SKU: ADMT160608R-D56-WKK25G-WALTER Product label: Fräswendeschneidplatte ADMT160608R-D56 WKK25G Walter Tools Facts Plate size: 16 Plate thickness: 06 Corner radius: 0.8 Free angle: 15° Chipbreaker: D56 Special features Series: Tiger·tec Gold Grade: WKK25G Shape: Parallelogramm 85° Application: cast iron Ausführung: T Tolerance class: M FAQ What materials is this insert designed for? The ADMT160608R-D56 WKK25G insert from Walter Tools is formulated for machining cast iron, with the WKK25G grade and Tiger·tec Gold coating optimised for abrasive, brittle materials. How does the D56 chipbreaker affect machining of cast iron? The D56 chipbreaker produces short, controlled chips when milling cast iron, improving chip evacuation and minimising the risk of surface damage while supporting stable cycle times with the Walter Tools insert. What does the 85° parallelogram form offer in practice? An 85° parallelogram geometry provides versatile entry angles and good accessibility for pockets and contours; it also ensures reliable seating and repeatable insert positioning in compatible toolholders. Can the insert improve process economics? Yes — the combination of Tiger·tec Gold coating and the WKK25G grade extends tool life in abrasive cast iron, reducing insert changes and contributing to lower tooling costs and higher machine utilisation. Manufacturer: Walter Tools; part of Walter AG, Tübingen, Germany The Walter AG (brand: Walter Tools) with its headquarters in Tübingen belongs to the Sandvik Group and is recognised for precision tooling. Protected trademarks and trade names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
ADMT160608R-D56 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKP25S grade for durable, productive milling of steel and cast iron; the robust D56 chipbreaker and 0.8 mm corner radius ensure controlled chips and consistent surface quality — order availability and application advice via Metav Werkzeuge. ADMT160608R-D56 WKP25S Fräswendeschneidplatte (Tiger‑tec Silver) – for steel and cast iron | Walter Tools The ADMT160608R-D56 WKP25S is a coated carbide milling insert intended for versatile milling of unalloyed and alloyed steels as well as cast iron, offering high wear resistance and reliable chip control. Tiger‑tec Silver coated grade WKP25S Parallelogram 85° insert shape 15° relief angle for stable cutting 0.8 mm corner radius for edge strength Engineered for steady, high‑productivity milling The coated carbide grade WKP25S (Tiger‑tec Silver) is formulated for productive machining of steel and cast iron. With its D56 chipbreaker the insert provides consistent chip control, which reduces downtime from chip-related issues and supports stable cutting conditions. The parallelogram 85° geometry distributes cutting forces evenly and is conducive to secure clamping in standard milling holders. Because the grade is optimised for materials in the P and K groups of ISO 513, process parameters are better preserved and tool life is extended, helping to maintain throughput in production environments. Improved edge stability and surface consistency A 15° relief angle combined with a 0.8 mm corner radius delivers a balance between edge strength and accessible cutting action. This combination reduces the likelihood of premature edge chipping under interrupted cuts and supports a predictable wear pattern during extended runs. For workshop planners and process engineers, the result is a more consistent surface finish and fewer unscheduled tool changes; these operational advantages translate into measurable improvements in component quality and machining uptime. Practical application and process support The insert's dimensions (plate size 16, thickness 06) and its geometry make it suitable for a wide range of milling operations where robust performance is required. The coated grade is intended to handle the heat and abrasive wear typical of steel and the short, breaking chips often encountered with cast iron. Indexable insert handling is straightforward: the design is compatible with common parallelogram toolholders, enabling quick replacement and reduced fixture time. For shops seeking reproducible performance across batches, the combination of Tiger‑tec Silver coating and WKP25S composition offers a reliable basis for setting stable process windows. Contact Metav Werkzeuge for availability and personalised application advice on Walter Tools inserts — call +49 2822 7131930 or eMail info@metav-werkzeuge.com to discuss the ADMT160608R-D56 WKP25S for specific machining tasks Technical data SKU: ADMT160608R-D56-WKP25S-WALTER Article designation: ADMT160608R-D56 WKP25S Product type: Fräswendeschneidplatte Series: Tiger‑tec Silver Facts Plate size: 16 mm Thickness: 06 Relief angle: 15° Corner radius: 0.8 mm Tolerance class: M Features Grade/coating: WKP25S, Tiger‑tec Silver Chipbreaker: D56 Plate shape: Parallelogram 85° Material groups: P / K (steel, cast iron) Execution: T Manufacturer: Walter Tools FAQ What materials can be machined with this insert? The ADMT160608R-D56 WKP25S insert is designed for machining materials in ISO groups P and K, specifically a range of steels and cast irons. How does the Tiger‑tec Silver coating benefit the machining process? The Tiger‑tec Silver coating on the WKP25S grade improves wear resistance and thermal stability, which helps to extend tool life and maintain a consistent cutting edge during steel and cast‑iron machining. What is the purpose of the D56 chipbreaker? The D56 chipbreaker is engineered to produce controllable chip forms in both steel and cast iron, reducing the risk of chip entanglement and contributing to process reliability. Is the parallelogram 85° shape suitable for common milling holders? Yes, the parallelogram 85° geometry is compatible with standard toolholders that accept this insert form, enabling secure clamping and straightforward replacement. What cutting conditions suit this insert best? Cutting conditions depend on workpiece material and machine capability; the WKP25S grade is optimised for the thermal and abrasive characteristics of steels and cast irons, promoting stable performance under typical milling feeds and speeds. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no affiliation between Metav Werkzeuge and the mentioned brands. The offered item is an original, brand‑new product from the manufacturer.
ADMT160608R-D56 WKP35G Wendeplatten - Walter Tools
Taking advantage of the Tiger‑tec Gold coating and the D56 chipbreaker delivers a productive balance of process security and tool life; order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. ADMT160608R-D56 WKP35G – Fräswendeschneidplatte, Tiger‑tec Gold coating, D56 chipbreaker (Walter Tools) The ADMT160608R-D56 WKP35G is a coated carbide milling insert optimised for productive machining of steel and cast iron, combining a robust chip control geometry with a wear-resistant grade. Tiger‑tec Gold coated carbide Optimised for steel and cast iron D56 chipbreaker for stable chip control 15° relief angle, 0.8 mm corner radius Higher throughput through coating and geometry The combination of the Tiger‑tec Gold coating and the WKP35G carbide grade results in consistently high cutting performance, especially in interrupted cuts and mixed production runs. The coating reduces abrasive wear and improves thermal resistance, which increases time between indexings and lowers unit machining costs. The D56 chipbreaker is designed to create short, controllable chips when turning common ISO group P and K materials, improving tool stability and reducing cycle-time variability. This leads to measurable productivity benefits in both batch and single‑piece production environments. Reliable edge life and process stability The insert’s geometry—a parallelogram 85° shape with a 0.8 mm corner radius and a 15° relief angle—supports a stable cutting edge that withstands variable cutting forces. These features, together with the coated carbide grade, deliver improved wear resistance and repeatable performance across runs. In practice, this means fewer unplanned tool changes and more predictable component quality, which supports leaner process planning and higher first‑pass yield on steel and cast‑iron components. Practical compatibility and handling advantages Designed for standard milling toolholders that accept the ADMT form, the insert’s size 16 and thickness code 06 fit common modular tool systems and allow straightforward tool assembly. The WKP35G grade targets the ISO material groups P (steel) and K (cast iron), ensuring appropriate mechanical and thermal behaviour for these substrates. The nominal tolerance class M supports repeatable positioning and secure clamping, which helps maintain dimensional accuracy across tool changes and regrinds. What the grade and chipbreaker mean for production The grade name indicates a coated cemented carbide formulation optimised for general‑purpose machining in steel and cast iron. The D56 chipbreaker is engineered to break chips reliably under typical cutting parameters for these materials; this reduces the need for manual chip handling and improves machine uptime. For customers transitioning between workpiece types, the insert offers a balance of toughness and wear resistance that minimises the need for multiple specialised grades, simplifying tool inventory. For tailored application advice or to reserve Walter Tools inserts from stock, contact Metav Werkzeuge for precise recommendations and prompt supply. Technical data Article number: ADMT160608R-D56-WKP35G-WALTER Name: Fräswendeschneidplatte ADMT160608R-D56 WKP35G Walter Tools Manufacturer: Walter Tools Type: Fräswendeschneidplatte Series: Tiger‑tec Gold Grade: WKP35G Core dimensions Free angle: 15° Corner radius: 0.8 mm Plate size: 16 Thickness code: 06 Tolerance class: M Plate form: Parallelogram 85° Special features Coating: Tiger·tec Gold Material: P / K Chipbreaker: D56 Execution: T Suitable for: Steel; Cast iron Designation: ADMT160608R-D56 WKP35G FAQ What materials is this insert designed for? The ADMT160608R-D56 WKP35G is specified for ISO groups P (steel) and K (cast iron), with the coating and grade tuned to handle typical heat and chip formation in these materials. How does the D56 chipbreaker affect machining? The D56 chipbreaker produces short, consistent chips under typical cutting parameters for steel and cast iron, improving machine cleanliness and reducing interruptions caused by long chips. Is the insert suitable for interrupted cuts? Yes, the coated carbide grade and the insert geometry provide toughness and thermal resistance that enhance performance in interrupted and mixed cutting conditions. What does the 0.8 mm corner radius influence? A 0.8 mm corner radius balances edge strength and surface finish; it increases edge durability while maintaining acceptable surface integrity on most steel and cast‑iron components. Which toolholders accept this insert form? The insert uses the ADMT form and fits holders and cutter bodies designed for that indexable geometry; confirmation of holder compatibility is recommended before assembly. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.*
ADMT160608R-D56 WKP35S Wendeplatten - Walter Tools
Take advantage of the proven combination of a wear‑resistant Tiger‑tec Silver grade and a geometry engineered for reliable chip control to boost productivity and reduce tool costs. Order the insert directly via Metav Werkzeuge or consult the Metav team for application advice. ADMT160608R-D56 WKP35S indexable milling insert — Tiger‑tec Silver, for steel and cast iron, Walter Tools The ADMT160608R-D56 WKP35S is an indexable milling insert designed for robust face and shoulder milling in mixed production environments, offering high process security for steel (P) and cast‑iron (K) applications. *Tiger‑tec Silver coated carbide grade WKP35S *Parallelogram 85° geometry for versatile milling *0.8 mm corner radius for stable edge strength *Optimised chipformer D56 for steel and cast iron Increase throughput with durable coated carbide The Tiger‑tec Silver coating combined with the WKP35S grade delivers a balance of wear resistance and thermal stability that translates into longer tool life and fewer index changes per shift. Coated carbide reduces flank and crater wear under typical steel and cast‑iron cutting conditions, enabling higher cutting speeds and sustained productivity. For operations seeking lower cost per component, the coated grade supports extended life without sacrificing surface quality. Reliable chip control for consistent part quality The chipformer D56 is engineered to break and evacuate chips efficiently, reducing the risk of chip re‑cutting and heat build‑up. Paired with the parallelogram 85° geometry and a 15° relief, the insert promotes controlled cutting forces and stable engagement during interrupted cuts. The result is improved dimensional repeatability and fewer rejects when machining shoulder faces or stepped features. Versatility across steel and cast‑iron machining Specified for material groups P (steel) and K (cast iron), this grade suits workshops that handle a variety of ferrous components. The substrate and coating combination is optimised for the heat generation and abrasive wear typical of these materials, offering predictable performance across different steel grades and grey or nodular cast iron. This versatility simplifies tooling management for mixed production lines. Process security and practical geometry benefits With a 0.8 mm corner radius and a tolerance class of M, the insert provides robust edge strength while maintaining acceptable surface finish for typical finishing and semi‑finishing operations. The insert size 16 and thickness 06 allow integration into common milling cutter bodies designed for parallelogram‑style inserts, so retrofitting into existing tool systems is straightforward and keeps setup times low. These features support stable tool life and reproducible results in series production. Contact Metav Werkzeuge for tailored advice on Walter Tools Tiger‑tec Silver inserts and application recommendations — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: ADMT160608R-D56-WKP35S-WALTER Article: ADMT160608R-D56 WKP35S Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Plate size: 16 Thickness: 06 Relief angle: 15° Corner radius: 0.8 mm Geometry: Parallelogram 85° Tolerance class: M Special features Coating / grade: WKP35S (coated carbide) Chipformer: D56 Material suitability: Steel (P) and Cast iron (K) Execution: T Series description: Tiger‑tec Silver FAQ What materials is this insert suitable for? The ADMT160608R-D56 WKP35S indexable milling insert from Walter Tools is specified for machining steel (P) and cast iron (K) according to the ISO material group designations. How does the Tiger‑tec Silver coating benefit the machining process? The Tiger‑tec Silver coating on the WKP35S grade enhances wear resistance and thermal stability, extending tool life and allowing higher cutting parameters for improved productivity. What role does the chipformer D56 play in performance? The chipformer D56 controls chip shape and evacuation to avoid re‑cutting and heat concentration, supporting consistent surface finish and process reliability in interrupted‑cut operations. Which cutter geometry does the insert offer and what is the advantage? The parallelogram 85° form with a 15° relief delivers flexible entry angles and stable cutting forces, making the insert suitable for versatile face and shoulder milling tasks. Is the insert recommended for stainless steel? Suitability for stainless steel is not specified in the provided data; the ADMT160608R-D56 WKP35S is described for steel and cast iron applications. Manufacturer/Responsible: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is original, factory‑new merchandise of Walter Tools.
ADMT160608R-D56 WSP45G T Wendeplatten - Walter Tools
The combination of a wear-resistant Tiger·tec Gold grade and a precise D56 chipbreaker delivers stable cutting edges and predictable chip control for demanding milling tasks. Order the ADMT160608R-D56 WSP45G insert directly via Metav Werkzeuge or ask our consultants if needed. ADMT160608R-D56 WSP45G — Parallelogram 85° milling insert, 15° clearance, Walter Tools ADMT160608R-D56 WSP45G is a coated carbide indexable insert for versatile milling applications in steel, stainless steel and heat-resistant alloys Tiger·tec Gold PVD coating Suitable for steel, stainless and superalloys Parallelogram 85° insert geometry 15° clearance; 0.8 mm corner radius Consistent wear performance for uninterrupted production The Tiger·tec Gold technology used in this grade combines a PVD-based coating with a robust substrate to provide improved wear resistance and longer tool life. With the ADMT160608R-D56 WSP45G insert, the PVD-coated carbide surface reduces abrasive and adhesive wear, which in turn keeps the cutting edge sharper for more consistent part quality over longer cycles. The built-in chipbreaker D56 promotes controlled chip formation, lowering the risk of surface damage and enabling more reliable unattended runs. Confidence when machining demanding workpiece families This insert is specified for the ISO groups P, M and S, which means it is engineered to machine a broad range of materials: unalloyed and alloyed steel, stainless steels and heat-resistant superalloys or titanium grades. The WSP45G grade offers a balance of toughness and heat resistance, helping to avoid premature chipping when cutting tough, adhesive materials and reducing the likelihood of built-up edge. The result is improved process security and repeatable surface finishes even on challenging batches. Geometry that increases process reliability and part accuracy The parallelogram 85° geometry reduces interference in shoulder and face milling while giving stable engagement for a variety of axial and radial depths of cut. The specified 15° clearance angle lowers flank contact, reducing rubbing and thermal load on the tool, and the 0.8 mm corner radius gives a favourable compromise between edge strength and the achievable surface finish. These geometric choices work together to increase feed rates and maintain dimensional consistency across production runs. Easy integration into existing milling systems and workflows With a tolerance class M and the standardised ADMT form factor, the insert fits common Walter Tools toolholders and clamping systems for milling. The coded thickness and size identifiers simplify replacement and inventory management. For best results, correlate the insert’s chipbreaker and grade to cutting parameters for the specific material; process data sheets are available and technical advice can be provided by Metav Werkzeuge to adapt cutting speed and feed for maximum productivity. For application consulting, cutting data or to place an order for Walter Tools ADMT160608R-D56 WSP45G inserts, contact Metav Werkzeuge for tailored support and fast delivery options. Technical data Article number: ADMT160608R-D56-WSP45G-WALTER Product name: ADMT160608R-D56 WSP45G Product type: Fräswendeschneidplatte (milling indexable insert) Manufacturer: Walter Tools Series: Tiger·tec Gold Numbers / core technical data Size: 16 mm Thickness: 06 Corner radius: 0.8 mm Clearance angle: 15° Insert form: Parallelogram 85° Chipbreaker: D56 Tolerance class: M Designs / special features Grade: WSP45G Coated carbide (PVD), described as coated hardmetal Material suitability: steel (P), stainless steel (M), superalloys/titanium (S) Execution: T FAQ What materials can this insert machine effectively? The ADMT160608R-D56 WSP45G insert is intended for a wide material range and is suitable for steel, stainless steels and heat-resistant superalloys, reflecting the ISO groups P, M and S described for this grade. How does the D56 chipbreaker affect machining? The chipbreaker D56 is designed to produce predictable chip forms and assist evacuation during milling; with the WSP45G grade it supports consistent surface quality and reduces the risk of chip-related interruptions. Is this insert compatible with standard Walter toolholders? The ADMT form and tolerance class M match common Walter Tools holders and clamping systems; compatibility with specific holders should be checked against the holder catalogue and clamping data. What benefit does the 0.8 mm corner radius provide? A 0.8 mm corner radius increases edge strength compared with smaller radii, improving resistance to chipping while still producing acceptable surface finishes for many milling operations. How should cutting data be selected for this grade? Cutting parameters should be chosen according to the workpiece material and the machine’s rigidity; Metav Werkzeuge can provide recommended speeds and feeds tailored to the machine, holder and application. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT160608R-F56 WAK15 Wendeplatten - Walter Tools
Take advantage of the combination of a sharp WAK15 uncoated carbide grade, precise F56 chip control and a 15° clearance for efficient machining of aluminium and other non‑ferrous materials; order this insert directly via Metav Werkzeuge or consult the team for application advice. ADMT160608R-F56 WAK15 — Fräswendeschneidplatte (for aluminium & non‑ferrous metals) by Walter Tools The ADMT160608R-F56 WAK15 is a parallelogram indexable milling insert engineered for high‑quality machining of aluminium and other non‑ferrous metals, combining a sharp geometry with secure chip control. Uncoated carbide grade WAK15 for non‑ferrous metals F56 chipbreaker for consistent chip control 15° clearance angle for sharp cutting action Parallelogram 85° form with 0.8 mm radius Consistent performance where non‑ferrous precision matters The Walter N‑series carbide grade WAK15 is an uncoated carbide developed specifically for machining aluminium and other non‑ferrous alloys. The combination of a very sharp cutting edge and the dedicated F56 chipbreaker reduces material adhesion and prevents built‑up edge, which translates directly into stable surface finish and longer tool life in serial production. For workshops transitioning from general‑purpose inserts, this geometry provides a measurable improvement in cycle stability without complex process changes. Improved productivity through controlled chip formation A reliable chip evacuation strategy is essential when working with soft, ductile materials. The F56 chipbreaker on this insert shapes chips to avoid tangling and ensures predictable removal, reducing machine downtime for clearing and lowering the risk of workpiece rework. Coupled with the 15° clearance, the insert delivers a low cutting force and clean shearing action, which permits higher feed rates and shorter cycle times on finishing and semi‑finishing passes. Geometry and dimensions that simplify integration The insert's parallelogram 85° form and 0.8 mm corner radius are compatible with common milling cutters that accept ADMT‑style inserts, allowing straightforward retrofitting. With a 16 mm inscribed circle and a 6 mm thickness, the robust body supports stable clamping and repeatable results across multiple tool pockets. This geometry is particularly well suited for productions where part consistency and repeatability are required, while the moderate corner radius balances edge strength and surface quality. Practical guidance for application and process choice When selecting cutting data for this grade, favour moderate cutting speeds and increased feed per tooth compared with treatments for steel; the WAK15 grade benefits from sharper edges and lower cutting temperatures typical of non‑ferrous machining. Where surface finish is critical, the combination of the F56 chipbreaker and the sharp geometry reduces the need for additional finishing passes. For less experienced teams, a short trial on a representative workpiece will clarify optimal feed and speed windows before full production. Contact Metav Werkzeuge for tailored setup recommendations for Walter Tools inserts and to check compatibility with existing cutters and toolholders Technical data Article number: ADMT160608R-F56-WAK15-WALTER Product designation: ADMT160608R-F56 WAK15 Type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Walter N‑Sortensystem Grade: WAK15 Chipbreaker: F56 Shape: Parallelogramm 85° Execution: T Material code: N Tolerance class: M Numbers / Core technical data Inscribed circle / size: 16 mm Thickness: 6 mm Corner radius: 0.8 mm Clearance angle: 15° SKU: ADMT160608R-F56-WAK15-WALTER Special features / Versions Uncoated carbide grade for non‑ferrous metals Optimised for aluminium and NE‑metals Part of the Walter N‑sortensystem Suitable for machining aluminium and Messing Designed for predictable chip formation and stable cutting FAQ Which materials is this insert intended for? The ADMT160608R‑F56 WAK15 insert is intended primarily for aluminium and other non‑ferrous metals, the WAK15 grade being optimised for these materials. Is the insert coated or uncoated? This grade is uncoated carbide (WAK15), designed to provide a very sharp cutting edge and low adhesion when machining soft metals. What is the corner radius and how does it affect finish? The insert has a 0.8 mm corner radius; this radius offers a compromise between edge strength and surface finish, suitable for general finishing and semi‑finishing passes. Can the insert be used in existing ADMT toolholders? The ADMT160608R‑F56 form and size conform to standard ADMT‑type toolholders; compatibility should be confirmed against the toolholder specification before assembly. What benefits does the F56 chipbreaker provide? The F56 chipbreaker shapes chips to avoid clogging and ensures consistent evacuation, improving process reliability and reducing interruptions during production. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
ADMT160608R-F56 WKK25G WKK25G Wendeplatten - Walter Tools
High process security and stable chip formation from the Tiger·tec Gold grade enable consistently productive machining of abrasive cast iron; the combination of the WKK25G substrate and the F56 chipbreaker extends tool life and improves surface finish. Order the ADMT160608R-F56 WKK25G milling indexable insert directly via Metav Werkzeuge or ask the consultants if needed. ADMT160608R-F56 WKK25G milling indexable insert – Tiger·tec Gold, F56 chipbreaker (for cast iron) by Walter Tools A ADMT160608R-F56 WKK25G milling indexable insert engineered for efficient, repeatable cast iron machining with a Tiger·tec Gold coating and a parallelogram 85° geometry. Tiger·tec Gold coated grade WKK25G Optimised for cast iron machining F56 chipbreaker for controlled chips 15° relief angle, 0.8 mm corner radius Reliable productivity for abrasive cast iron machining The insert provides a robust solution for demanding cast iron operations: the WKK25G grade, part of the Tiger·tec Gold family, is a coated carbide substrate formulated to resist abrasive wear typical of cast components. With a focus on measurable productivity gains, the geometry and coating together reduce flank wear and promote stable chip formation, which leads to longer tool life and fewer index changes. This results in fewer interruptions and more consistent throughput on milling machines. Precision geometry that improves process stability The parallelogram 85° shape combined with a 15° relief angle and 0.8 mm corner radius provides a balance between cutting edge strength and cutting action. The F56 chipbreaker is designed to control short, brittle chips commonly produced from cast iron, reducing the risk of re-cutting and improving surface integrity. Operators benefit from predictable tool behaviour and a reduced need for downstream rework, while planners gain clearer cycle-time estimates. Coating and grade benefits for longer service life Tiger·tec Gold technology contributes to wear resistance and temperature stability at the cutting edge. The coated carbide construction of the grade is tailored for the abrasive nature of cast iron (ISO group K), offering a compromise between toughness and hardness that reduces breakage and maintains edge quality. Applied in situations with frequent interrupted cuts, this combination supports repeatable performance and helps to maintain a consistent surface finish across batches. Practical application and workpiece considerations This indexable insert suits milling operations where cast iron components demand both productivity and cost-effective tool performance. The ADMT160608R-F56 WKK25G is primarily intended for Gusseisen (cast iron) applications and performs well under common interrupted-cut scenarios. Toolroom staff and process engineers will find the insert appropriate for stable roughing and finishing passes where controlled chip evacuation and edge life are priorities. For tailored advice on integrating the Tiger·tec Gold WKK25G insert into existing processes and for availability, contact Metav Werkzeuge for application support and reliable supply. Technical Data Article number: ADMT160608R-F56-WKK25G-WALTER Product: Milling indexable insert Grade: WKK25G Series: Tiger·tec Gold Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 0.8 mm Size: 16 Thickness: 06 Shape: Parallelogram 85° Chipbreaker: F56 Tolerance class: M Special features Coating: Tiger·tec Gold Substrate: coated carbide Application: Cast iron (K) Geometry: parallelogram 85° Designation: ADMT160608R-F56 Execution: T FAQ Is this insert suitable for cast iron components? Yes. The ADMT160608R-F56 WKK25G insert is specifically formulated for cast iron (ISO group K) and offers abrasion resistance and chip control optimised for these materials. What coating and grade does the insert use? The insert features the Tiger·tec Gold coating and the WKK25G grade, a coated carbide designed to improve wear resistance and maintain cutting-edge stability. Which chipbreaker and geometry are provided? This insert uses the F56 chipbreaker and a parallelogram 85° shape with a 15° relief angle to promote controlled chips and consistent cutting behaviour. What are the key dimensional values to consider? Relevant technical values include a size of 16, a thickness indicated as 06, and a corner radius of 0.8 mm, which together influence cutting forces and application suitability. Can this insert handle interrupted cuts and roughing operations? Yes. The combination of grade, coating and geometry supports interrupted cutting typical in milling cast iron, offering a stable edge and controlled chip formation for roughing and certain finishing passes. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT160608R-F56 WKP25S Wendeplatten - Walter Tools
The combination of the Tiger·tec Silver coating and the WKP25S grade provides extended tool life and consistent edge stability for demanding milling tasks; paired with the parallelogram 85° geometry and F56 chipbreaker, this insert delivers reliable chip control and secure seating in robust fixtures. Order the ADMT160608R-F56 WKP25S milling insert directly via Metav Werkzeuge or ask the consultants for application support. ADMT160608R-F56 WKP25S — Milling indexable insert, Tiger·tec Silver, Walter Tools ADMT160608R-F56 WKP25S is a parallelogram-shaped milling insert designed for productive machining of steel and cast iron. Tiger·tec Silver coated carbide for wear resistance Suitable for P (steel) and K (cast iron) applications Parallelogram 85° geometry for secure clamping 15° clearance and 0.8 mm corner radius for surface quality Longer tool life through advanced coating technology The Tiger·tec Silver surface treatment used on the WKP25S grade is a multilayer coating applied to a coated carbide substrate, engineered to reduce abrasive wear and to withstand the thermal loads typical in steel machining. This results in fewer tool changes and a higher productive cutting time per insert, which improves overall process economy. In practical terms, the coating supports constant cutting-edge stability during interrupted cuts and variable depths of cut, translating into predictable tool performance and fewer unexpected stoppages. Geometry and chip control that stabilise the process The parallelogram 85° form combined with the F56 chipbreaker is designed to promote consistent chip formation and evacuation when machining both unalloyed and alloyed steels as well as cast iron. The defined 15° clearance minimises rubbing behind the cutting edge while the 0.8 mm corner radius contributes to a sturdy edge that resists chipping under heavy feed. These geometric choices mean improved surface finish and enhanced tool life, particularly in operations requiring interrupted engagement or variable cut depths. Application range and process reliability Designed for ISO groups P (steel) and K (cast iron), this insert supports a wide spectrum of workshop and production duties where robust, repeatable results are required. The WKP25S grade provides a balance between wear resistance and edge toughness, making it suitable for conventional and semi-finishing passes. The tolerance class M indicates dimensional consistency suitable for indexed toolholders, enabling rapid re-indexing and reduced setup times—key factors for throughput-focused environments. Practical handling and integration benefits The insert’s designation and format facilitate straightforward integration into existing milling systems that accept parallelogram inserts of this geometry. The plate size and thickness coding ensure compatibility with standard clamping systems, and the marked chipbreaker reduces the need for trial-and-error parameter tuning when switching materials between steel and cast iron. For production planners and toolroom staff, these characteristics contribute to predictable process windows and simplify inventory decisions for mixed-material production. For high-productivity milling with Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge for availability and tailored application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data SKU: ADMT160608R-F56-WKP25S-WALTER Label: Fräswendeschneidplatte ADMT160608R-F56 WKP25S Walter Tools Product type: Milling indexable insert Series: Tiger·tec Silver Grade: WKP25S Manufacturer: Walter Tools Facts Clearance angle: 15° Corner radius: 0.8 mm Plate size: 16 Plate thickness code: 06 Chipbreaker: F56 Tolerance class: M Special features Coated carbide (multilayer coating) Suitable for P (steel) applications Suitable for K (cast iron) applications Parallelogram 85° geometry Robust edge for interrupted cuts FAQ What materials is this insert suited for? The ADMT160608R-F56 WKP25S insert (Walter Tools milling indexable insert) is specified for ISO groups P and K, meaning it is suitable for machining steel and cast iron. How does the Tiger·tec Silver coating affect performance? The Tiger·tec Silver coating on the WKP25S grade increases wear resistance and thermal stability, which extends tool life and improves cutting-edge reliability during steel and cast-iron milling operations. What is the benefit of the parallelogram 85° shape? The parallelogram 85° geometry provides a secure clamping interface and optimised cutting-wedge exposure, supporting stable cutting forces and consistent chip flow for the ADMT160608R-F56 WKP25S insert. Can the insert be used for finishing passes? Yes, with its 0.8 mm corner radius and defined clearance angle, the insert offers sufficient edge strength and surface quality for finish and semi-finish milling in the applicable materials. What does the tolerance class M imply for toolholders? Tolerance class M indicates dimensional consistency that supports predictable seating and repeatable indexing in compatible toolholders, reducing setup variability for series production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The item offered is original and brand-new from the manufacturer, Walter Tools.
ADMT160608R-F56 WKP35G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the WKP35G grade delivers extended tool life and reliable chip control in steel and cast-iron milling operations; benefit from stable edge condition and consistent results. Order via Metav Werkzeuge or consult their specialists for application-matched selection and delivery. ADMT160608R-F56 WKP35G milling insert — Tiger·tec Gold, for steel and cast iron (Walter Tools) ADMT160608R-F56 WKP35G is a precision milling insert developed for productive roughing and finishing in steel and cast iron applications, combining a Tiger·tec Gold coating with a dedicated F56 chipbreaker and parallelogram 85° geometry Tiger·tec Gold coating for long tool life WKP35G grade for steel and cast iron Parallelogram 85° geometry for flexible milling 15° clearance and 0.8 mm corner radius High productivity through advanced coating and grade The Tiger·tec Gold surface technology paired with the WKP35G cemented-carbide grade provides a direct improvement in process stability and tool life. The coated carbide construction reduces abrasive wear and improves thermal resistance during prolonged cutting, which translates into fewer insert changes and higher uptime. Specified as a coated hardmetal grade, this configuration is especially effective for the thermal load and chip forms typical of steel and cast-iron machining, resulting in a measurable increase in productivity and lower cost per component. Predictable chip control and machining quality Equipped with the F56 chipbreaker and a parallelogram 85° insert shape, the geometry is tailored for controlled chip formation and reliable evacuation in a range of milling strategies. The moderate corner radius (0.8 mm) and 15° clearance angle contribute to a balance between edge strength and fine surface quality; this supports stable cutting at practical feeds and speeds. According to ISO classification, suitability for P (steel) and K (cast iron) materials ensures the insert performs across common workshop tasks, delivering repeatable surface finish and reduced rework. Robust fitment and consistent process results Design aspects such as the tolerance class M, the execution code T, and the standard insert format guarantee secure clamping and repeatable positioning in indexable milling cutters. These mechanical characteristics support a stable cutting edge during interrupted cuts and high-load conditions, which helps maintain dimensional accuracy across batches. Backed by Walter Tools' manufacturing standards, the insert offers consistent edge geometry and predictable wear behaviour, aiding planning for tool-change intervals and process optimisation. For application-specific advice or to order ADMT160608R-F56 WKP35G inserts from Walter Tools, contact Metav Werkzeuge for technical support and rapid supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: ADMT160608R-F56-WKP35G-WALTER Designation: ADMT160608R-F56 WKP35G Product type: Milling insert Manufacturer: Walter Tools Core data Corner radius: 0.8 mm Clearance angle: 15° Insert size: 16 mm Thickness: 06 Tolerance class: M Special features Series: Tiger·tec Gold Grade/sort: WKP35G (coated cemented carbide) Chipbreaker: F56 Insert shape: Parallelogram 85° Material applicability: Steel (P), Cast iron (K) Execution: T FAQ What materials is this insert suitable for? The ADMT160608R-F56 WKP35G insert is specified for steel (P) and cast iron (K) applications and is optimised via the Tiger·tec Gold coating for those material groups. How does the F56 chipbreaker affect machining? The F56 chipbreaker offers controlled chip formation for a range of feeds, improving evacuation and reducing recutting, which leads to more consistent surface quality with the ADMT160608R-F56 WKP35G insert. What are the key geometry benefits of the parallelogram 85° shape? The parallelogram 85° form provides flexibility in milling orientations and stable cutting engagement, helping to maintain edge strength and deliver predictable tool life under varying cutting conditions. Which features support longer tool life and process security? The combination of the Tiger·tec Gold coating, the WKP35G grade and a robust corner radius contributes to abrasion resistance, thermal stability and reliable edge retention for extended intervals between changes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Geschützte Markenzeichen and product names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of the manufacturer Walter Tools.
ADMT160608R-F56 WKP35S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating and the WKP35S grade for long tool life and reliable chip control in demanding production environments. The parallelogram 85° geometry and 0.8 mm corner radius deliver stable cutting and consistent surface quality on steel and cast iron. Order this insert directly via Metav Werkzeuge or consult our team for application-specific recommendations. ADMT160608R-F56 (ADMT160608R-F56 WKP35S) — WKP35S milling insert for steel and cast iron · Walter Tools The ADMT160608R-F56 WKP35S is a precision indexable milling insert engineered for productive finishing and roughing operations in steel and cast iron. Tiger·tec Silver coating for extended tool life Optimised for steel (P) and cast iron (K) Parallelogram 85° shape for stable cutting 0.8 mm corner radius, 15° relief angle Durable coating for predictable tool life and economy The combination of Tiger·tec Silver technology and a WKP35S cutting grade provides a coated carbide construction that resists abrasive wear and thermal loading during continuous machining. This results in longer tool life and fewer indexings, which directly reduces downtime and tooling costs in medium- to high-volume production. The proprietary coating structure promotes predictable flank wear, enabling more reliable cycle planning and lower overall machining cost per component. Geometry that stabilises cutting and improves surface finish The Parallelogram 85° insert geometry, together with a 15° relief angle, ensures a robust support face and predictable engagement with the workpiece. The 0.8 mm corner radius contributes to vibration damping and delivers a consistent surface finish on each pass. These geometric characteristics make the insert particularly suitable where dimensional stability and repeatability are required, such as finishing passes or semi-finishing where minimal rework is a priority. Tailored for steel and cast iron with effective chip control Designed for ISO groups P and K, the grade is optimised for common steels and cast irons. The integrated F56 chipbreaker promotes controlled chip formation and evacuation, limiting recutting and improving process security in interrupted cuts or when machining complex castings. The grade’s balance between toughness and hardness helps avoid premature edge chipping while maintaining an effective cutting edge for reliable material removal rates. Practical integration for process reliability and inventory With a nominal size of 16 mm and a plate thickness of 06, the insert fits standard tool bodies and simplifies stock management. The tolerance class M supports repeatable positioning and toolholder interchangeability, reducing setup variability across shifts. For production planners and purchasing teams, this consistency translates into fewer rejects and streamlined tool-change procedures. If there is any uncertainty about suitability for a specific application, the technical team is available to advise on speeds, feeds and toolholder selection. Contact Metav Werkzeuge for tailored application support on Walter Tools’ Tiger·tec Silver inserts and secure the right configuration for efficient machining; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ADMT160608R-F56-WKP35S-WALTER Designation: ADMT160608R-F56 WKP35S Manufacturer: Walter Tools Data Size: 16 mm Thickness: 06 Corner radius: 0.8 mm Relief angle: 15° Geometry: Parallelogram 85° Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Chipbreaker: F56 Material suitability: P (steel) and K (cast iron) Execution: T FAQ What materials is this insert designed for? The ADMT160608R-F56 WKP35S insert from Walter Tools is formulated for machining steel (ISO group P) and cast iron (ISO group K), with a grade engineered for the thermal and abrasive demands of these materials. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating enhances wear resistance and thermal stability, which extends tool life and supports more consistent cycle times under continuous machining. What cutting geometry ensures stability with this insert? The Parallelogram 85° form combined with a 15° relief angle and 0.8 mm corner radius provides robust support and reduced vibration, improving surface finish and dimensional repeatability. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is an original, factory-new product of Walter Tools. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com
ADMT160608R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WSM35G carbide grade and the robust F56 chipbreaker for secure machining of stainless steels and heat‑resistant alloys; the parallelogram 85° geometry and 0.8 mm corner radius support reliable edge strength and surface quality. Order the ADMT160608R‑F56 WSM35G directly via Metav Werkzeuge or ask our consultants if needed. ADMT160608R-F56 WSM35G indexable milling insert – Tiger·tec Gold, F56 chipbreaker (for stainless steels & superalloys) — Walter Tools The ADMT160608R‑F56 WSM35G is an indexable milling insert designed for heavy‑duty machining of stainless steels and heat‑resistant superalloys, combining a heat‑resistant coating and a geometry optimised for stable cutting and predictable chip control. Tiger·tec Gold coating for heat resistance WSM35G grade for stainless and superalloys Parallelogram 85° geometry for versatile mounting 0.8 mm corner radius for reliable edge strength Higher cutting reliability for demanding materials The combination of the Tiger·tec Gold coating with the WSM35G grade gives a measurable advantage when machining tough, adhesive materials. The coating reduces flank wear and increases thermal resistance, while the grade formulation supports stable chip formation under elevated temperatures. For process engineers this means fewer tool changes and more consistent part quality, which translates into improved uptime and lower total machining cost. The abrasive and adhesive wear mechanisms common on stainless steels and superalloys are countered by the coating chemistry and substrate design, delivering a dependable cutting edge even in interrupted cuts. Predictable surface finish and edge security through geometry The parallelogram 85° format and the 15° clearance angle provide a stable seating in compatible toolholders and support conservative cutting directions when required. The F56 chipbreaker is tuned to produce short, controllable chips in stainless and heat‑resistant materials, reducing chatter and improving surface texture. The 0.8 mm corner radius increases edge resilience against notch wear without sacrificing acceptable surface finish, making this insert suitable for semi‑roughing to finishing passes where repeatability and component integrity matter. Integration into production for sustained productivity Inserts of this series are designed to deliver process security and reproducible performance. The tolerance class M and the insert design support quick indexing and consistent results across batches of parts. When paired with a properly matched cutter body, the insert offers long tool life and stable cutting behaviour, which helps to streamline tool inventory and simplify tool planning. Technical advisors can provide cutting data and parameter recommendations tailored to specific stainless grades or superalloy compositions to ensure optimal utilisation of the insert’s performance characteristics. For tailored recommendations on integrating Walter Tools Tiger·tec Gold inserts into existing machining processes, contact Metav Werkzeuge for application advice and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: ADMT160608R-F56-WSM35G-WALTER Designation: ADMT160608R-F56 WSM35G Series: Tiger‑tec Gold Manufacturer: Walter Tools Facts Clearance angle: 15° Corner radius: 0.8 mm Insert size: 16 Thickness code: 06 Geometry: Parallelogram 85° Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WSM35G Chipbreaker: F56 Applicable materials: S / M Suitable for: stainless steels Execution: T FAQ What materials is this insert designed for? The ADMT160608R‑F56 WSM35G insert from Walter Tools is formulated for stainless steels and heat‑resistant superalloys (material groups M and S), providing controlled chip formation and thermal resilience. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the insert improves thermal resistance and reduces flank wear, helping the ADMT160608R‑F56 WSM35G maintain a stable cutting edge and extend tool life in demanding applications. Which geometry features support mounting and stability? The parallelogram 85° geometry combined with a 15° clearance angle offers secure seating in compatible toolholders and supports stable cutting forces for repeatable machining performance. What role does the F56 chipbreaker play? The F56 chipbreaker is engineered to produce short, predictable chips in stainless steels and superalloys, reducing the risk of chip entanglement and improving surface finish and process reliability. Is this insert suitable for finishing operations? With a 0.8 mm corner radius and the robust WSM35G grade, the insert can be used for semi‑roughing and finishing passes where a balance of edge strength and surface quality is required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter Tools is part of a global tool offering and is recognised for providing precision cutting solutions; protected trademarks and trade names belong to their respective owners. The mentioned article is original factory‑new product of the manufacturer.
ADMT160608R-F56 WSM45X WSM45X Wendeplatten - Walter Tools
Benefit from a combination of secure edge stability, enhanced chip control and geometry tuned for demanding materials — ideal for continuous, productive milling of stainless steel and heat-resistant alloys. Order directly via Metav Werkzeuge or consult the sales team for application-specific recommendations. ADMT160608R-F56 WSM45X milling indexable insert — coated carbide, 15° relief (Walter Tools) The ADMT160608R-F56 WSM45X is a high-performance milling indexable insert engineered for heavy-to-machine materials and stainless steel, offering robust edge life and predictable chip formation in demanding industrial applications. Coated carbide for stainless steel and superalloys Parallelogram 85° insert form 0.8 mm corner radius for edge strength 15° relief angle for secure cutting High-performance grade for difficult-to-machine alloys The WSM45X grade combines a coated carbide substrate with a chipformer optimised for tough materials, providing stable chip control and resistance to built-up edge. This grade is especially suited to applications involving stainless steel and heat-resistant superalloys where heat generation and material toughness challenge conventional inserts. The result is fewer interruptions, longer effective edge life and more consistent part quality in serial production. Geometry that supports secure cutting and surface quality The parallelogram 85° shape paired with a 15° relief angle and 0.8 mm corner radius offers a balanced mix of radial support and edge robustness. This geometry reduces the risk of chipping at the corner while maintaining an effective cutting wedge for moderate depth passes. The integrated F56 chipbreaker helps to fragment chips reliably, reducing re-cutting and improving surface finish, which is particularly beneficial when turning complex stainless steel components or machining interrupted cuts. Productivity gains through predictable behaviour and easier process planning By using an insert from the Walter Schneidstoffsorte series, shops gain a repeatable performance that simplifies process documentation and tool-change planning. The grade’s focus on thermal stability and edge protection reduces unscheduled tool changes, and predictable wear behaviour supports longer uninterrupted cycles. For production environments that require consistent batch-to-batch quality, this insert contributes to shorter set-up times and lower scrap rates. Contact Metav Werkzeuge for advice on optimising feed and speed for Walter Tools WSM45X inserts or to discuss stock availability and delivery options Technical Data Article number: ADMT160608R-F56-WSM45X-WALTER Designation: ADMT160608R-F56 WSM45X Product type: Milling indexable insert (Fräswendeschneidplatte) Brand: Walter Tools Facts Insert size: 16 Thickness: 06 Corner radius: 0.8 mm Relief angle: 15° Special features Coating / grade family: WSM45X (Walter Schneidstoffsorte - Serie offen) Chipbreaker: F56 Insert form: Parallelogram 85° Material suitability: S / M (heat-resistant alloys, stainless steel) Tolerance class: M FAQ What materials is this insert designed for? The WSM45X grade is formulated for challenging materials such as heat-resistant superalloys and stainless steel; the insert’s coating and chipbreaker support secure chip formation and edge life in these applications. Which cutting geometry should be expected from the ADMT160608R-F56? This insert offers a parallelogram 85° form with a 15° relief angle and a 0.8 mm corner radius, delivering a compromise of edge strength and cutting efficiency suitable for medium to heavy milling operations. How does the F56 chipbreaker influence machining? The F56 chipbreaker on this Walter Tools insert promotes controlled chip fragmentation, reducing the risk of re-cutting and improving surface finish, particularly when machining stainless steel or interrupted cuts. Is this insert suitable for finishing passes on stainless steel? Yes; while primarily intended for heavy-to-machine materials, the combination of grade and geometry provides stable cutting behaviour that can be adapted to finishing operations with the correct feed and speed adjustments. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Mention of brand names serves explanation and comparison only; there is no affiliation or endorsement implied between Metav Werkzeuge and the named manufacturers.
ADMT160608R-F56 WSP45G Tiger-tec Gold Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Gold PVD grade, stable chip control and a compact parallelogram geometry for productive milling across a wide range of alloys; order the insert directly via Metav Werkzeuge or consult the team for application advice. ADMT160608R-F56 WSP45G milling insert — Tiger·tec Gold grade by Walter Tools A high‑performance milling insert designed for versatile face and shoulder milling in steels, stainless steels and heat‑resistant alloys, combining wear‑resistant coating technology with a stable parallelogram geometry ADMT160608R-F56 WSP45G by Walter Tools Tiger·tec Gold PVD coating for long tool life Suitable for Steel, stainless and heat‑resistant alloys Parallelogram 85° insert, 15° clearance, 0.8mm radius Productivity gains from a tough cutting grade The combination of the Tiger·tec Gold coating and a PVD‑coated carbide substrate delivers enhanced resistance to abrasive wear and thermal stress, which directly supports longer tool life and fewer insert changes. For machining steel and stainless steel, the selected grade promotes secure chip formation and reduces the risk of built‑up edge, so cycle times can be shortened without compromising surface quality. The result is measurable production efficiency with a reliable cutting edge. Geometry engineered for reliable cutting performance The parallelogram 85° shape and a 15° clearance angle provide stable cutting engagement and predictable load distribution, which is particularly beneficial in shoulder and ramping operations. A 0.8mm corner radius balances edge strength with surface finish, enabling robust material removal while maintaining acceptable roughness levels. The F56 chipbreaker supports controlled chips for steady evacuation, reducing interruptions and the need for manual chip handling. Broad application range with defined material suitability Designed for applications across P / M / S material groups, the grade is optimised for unalloyed and alloyed steel, stainless steel, and heat‑resistant superalloys and titanium. This makes the insert an economical choice when a single grade must cover multiple workpiece materials. The coating and substrate combination focuses on thermal resilience and edge stability, which helps maintain dimensional accuracy under varying cutting conditions. Practical advantages in workshop workflows The insert's tolerance class M and execution code T ensure consistent seating and easy indexing in compatible milling cutters, supporting quick insert changes and predictable machine set‑ups. Using a single, versatile insert type reduces inventory complexity and simplifies tool selection for mixed‑material production runs. Together with the coating technology and chip control, this reduces downtime and contributes to a more consistent output quality. For tailored cutting recommendations and fast availability of the ADMT160608R-F56 WSP45G insert from Walter Tools, contact Metav Werkzeuge for application support and order processing via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ADMT160608R-F56-WSP45G-WALTER Designation: ADMT160608R-F56 WSP45G Brand: Walter Tools Series: Tiger-tec Gold Grade: WSP45G Core specifications Inscribed size: 16 Thickness code: 06 Clearance angle: 15° Corner radius: 0.8 Chipbreaker: F56 Tolerance class: M Execution: T Features and applications Material suitability: P / M / S (Steel; stainless steel; heat‑resistant alloys & titanium) Coating technology: Tiger·tec Gold (PVD coated carbide) Geometry: Parallelogram 85° Use case: face and shoulder milling, general milling tasks Focus: stable chip formation and prolonged edge life FAQ What materials is this insert suitable for? The ADMT160608R‑F56 WSP45G insert is suitable for machining Steel, stainless steel and heat‑resistant alloys/titanium, as indicated by the P / M / S material classification for the grade. How does the Tiger·tec Gold coating benefit milling operations? Tiger·tec Gold provides improved wear resistance and thermal stability; in the ADMT160608R‑F56 WSP45G this leads to longer edge life and steadier performance across varied materials. What does the parallelogram 85° shape mean in practice? The parallelogram 85° geometry offers predictable cutting forces and stable engagement, which improves tool life and surface finish in shoulder and face milling. Is the insert compatible with standard toolholders? The insert uses common indexable insert seating conventions and tolerance class M, so compatibility with holders designed for ADMT‑style inserts is expected; correct seat and clamp verification is recommended. What role does the F56 chipbreaker play? The F56 chipbreaker promotes controlled chip formation and evacuation, reducing the chance of chip entanglement and enabling continuous machining with fewer interruptions. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used only for explanation. There is no affiliation between Metav Werkzeuge and the named manufacturers. The offered item is original, brand‑new merchandise from the manufacturer.
ADMT160608R-G56 WKP35G Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold coating and the WKP35G grade ensures reliable wear resistance and consistent edge life for mixed steel and cast‑iron work; the G56 chipbreaker and 0.8 mm corner radius support stable chip control and surface finish. Order directly via Metav Werkzeuge or request application advice from their specialists. ADMT160608R-G56 WKP35G milling indexable insert — Tiger‑tec Gold, for steel and cast iron (15°) The ADMT160608R-G56 WKP35G is a parallelogram 85° milling indexable insert engineered for productive machining of steel and cast iron, combining a robust coated grade with a dedicated chipbreaker geometry for dependable material removal. Tiger‑tec Gold coating WKP35G Suitable for steel (P) and cast iron (K) Parallelogram 85° form with 15° clearance G56 chipbreaker with 0.8 mm corner radius Maximise metal removal with stable edge life The coated cutting grade WKP35G, part of the Tiger‑tec Gold series, delivers a balance of wear resistance and toughness specifically adapted to the thermal and mechanical demands of machining steel and cast iron. The coating technology reduces abrasive wear and helps maintain a consistent cutting edge, so the insert sustains productivity over longer tool cycles. For manufacturing environments where predictable tool life supports process planning, this combination promotes fewer tool changes and steadier output. Consistent chip control for reliable surface quality The integrated G56 chipbreaker and the 0.8 mm corner radius are designed to manage chip formation in interrupted and continuous cuts, reducing the risk of built‑up edge and improving surface integrity. The parallelogram 85° form and 15° clearance angle create an advantageous cutting geometry that supports controlled cutting forces and directionality, leading to reproducible finishes in serial production. This geometry also contributes to vibration damping in many milling set‑ups, which benefits component tolerances and repeatability. Versatile, application‑oriented insert geometry With a standard size designation of 16 and thickness code 06, the insert fits common toolholders for face and shoulder milling operations where medium to heavy material removal is required. The tolerance class M supports interchangeability and predictable seating in clamping systems, simplifying tooling logistics. Because the grade is optimised for groups P and K (steel and cast iron), the same insert can be deployed across a range of components, reducing inventory complexity while retaining performance. Practical benefits for production planning Using an indexable insert with the WKP35G grade and Tiger‑tec Gold technology enables shops to prioritise cycle time and uptime. The engineered wear properties mean inspections and replacements can follow a predictable schedule, supporting maintenance planning. Improved chip control lowers the incidence of machining interruptions and tool rework, contributing to more efficient downstream processes and stable throughput. Contact Metav Werkzeuge for tailored application advice or to secure genuine Walter Tools Tiger‑tec Gold inserts for demanding steel and cast‑iron machining tasks Technical Data Article number: ADMT160608R-G56-WKP35G-WALTER Designation: ADMT160608R-G56 WKP35G Manufacturer: Walter Tools Product type: Milling indexable insert Series: Tiger‑tec Gold Facts Size: 16 Thickness: 06 Clearance angle: 15° Corner radius: 0.8 mm Form: Parallelogram 85° Chipbreaker: G56 Tolerance class: M Materials & features Applicable materials: Steel (P), Cast iron (K) Coating / Grade: WKP35G (Tiger‑tec Gold) Intended application: General milling operations in steel and cast iron Execution: T FAQ What materials is this insert intended for? The ADMT160608R-G56 WKP35G insert from Walter Tools is designed for machining steel (ISO group P) and cast iron (ISO group K), with the WKP35G grade tailored to those material behaviours. How does the G56 chipbreaker affect machining? The G56 chipbreaker promotes controlled chip formation and evacuation, enhancing surface finish and reducing the chance of built‑up edge when the ADMT160608R-G56 WKP35G insert is used in typical milling operations. What does the 85° parallelogram form mean for tool setup? The parallelogram 85° geometry provides a robust cutting face orientation that helps distribute cutting forces and is suitable for shoulder and face milling, offering stable engagement in many holder systems. Is the insert suitable for interrupted cuts? Yes, the combination of the WKP35G grade, G56 chipbreaker and a 0.8 mm corner radius offers resilience in interrupted and continuous cutting conditions typical of workshop and production environments. What does tolerance class M indicate? Tolerance class M denotes a medium tolerance ensuring reliable seating and repeatability in compatible clamping systems, facilitating quick insert changes without compromising positional accuracy. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADMT160608R-G56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKP35S carbide grade for extended tool life and reliable chip control; the G56 chipbreaker and 85° parallelogram form support consistent milling results in steel and cast iron. Order the insert directly via Metav Werkzeuge or consult the technical team for process data and cutting recommendations. ADMT160608R-G56 WKP35S indexable milling insert — Tiger‑tec Silver, G56 chipbreaker, Walter Tools The ADMT160608R-G56 WKP35S is an 85° parallelogram indexable milling insert designed for robust face and shoulder milling in steel and cast iron, offering wear-resistant performance under industrial cutting conditions Tiger‑tec Silver coated for long tool life Optimised G56 chipbreaker for reliable chips 85° parallelogram form with 15° relief angle 0.8 mm corner radius for consistent surface finish Higher productivity through wear-resistant coating and grade The combination of the Tiger‑tec Silver coating and the WKP35S grade provides a balance of toughness and abrasion resistance that maintains edge integrity under typical milling loads. This insert is engineered to manage the heat and chip formation associated with machining steel and cast iron, which reduces unplanned tool changes and keeps production moving. The indexable insert geometry, with a stable parallelogram 85° shape and a defined 15° relief, supports predictable cutting behaviour and simplifies tool path calculation for CNC programmes. Consistent chip control and improved surface quality The G56 chipbreaker is optimised to produce short, controllable chips when cutting catalogued steel grades and many types of cast iron; this improves evacuation and lowers the risk of re-cutting. A 0.8 mm corner radius contributes to a steadier cutting edge and helps achieve reproducible surface finishes, especially in interrupted cuts or shoulder milling. Because the chipform is guided reliably, downstream cleaning and machine wear are reduced, which leads to measurable process stability over longer tool life cycles. Practical application benefits and economic impact Designed for industrial milling operations, this insert is suitable where consistent performance and uptime matter. The insert series supports shops running mixed batches of steel and cast iron, thanks to a carbide substrate and coating combination tuned for those materials. Using this indexable plate can lower tooling costs per component by extending life and reducing secondary operations; the stable cutting edge also supports higher feed and depth of cut strategies in many machining scenarios. For cases requiring further specification, cutting data sheets and compatible cutter geometries are recommended to match the insert's parameters with machine capability. For process reliability and technical advice on the ADMT160608R-G56 WKP35S from Walter Tools, contact Metav Werkzeuge for tailored cutting data, availability and ordering support Technical Data Article number: ADMT160608R-G56-WKP35S-WALTER Designation: ADMT160608R-G56 WKP35S Product type: Fräswendeschneidplatte (indexable milling insert) Manufacturer: Walter Tools Series: Tiger‑tec Silver Core data Insert size: 16 Thickness: 06 Relief angle: 15° Corner radius: 0.8 mm Form: Parallelogram 85° Tolerance class: M Materials & special features Coating: Tiger‑tec Silver Grade: WKP35S Chipbreaker: G56 Material compatibility: P (steel), K (cast iron) Series description: coated carbide for steel and cast iron FAQ What materials is this insert suitable for? The ADMT160608R-G56 WKP35S insert from Walter Tools is intended for machining steel (ISO group P) and cast iron (ISO group K), as indicated by the grade and chipbreaker design. How does the Tiger‑tec Silver coating benefit production? The Tiger‑tec Silver coating on the WKP35S grade enhances wear resistance and thermal stability, which helps maintain cutting-edge integrity and extends tool life during continuous milling tasks. What is the purpose of the G56 chipbreaker? The G56 chipbreaker is engineered to produce short, controllable chips in typical steel and cast iron milling, improving chip evacuation and contributing to consistent surface quality. Which cutter geometries suit the parallelogram 85° form? Parallelogram 85° inserts are commonly used in face and shoulder milling cutters designed for moderate radial engagement and reliable axial positioning; matching the insert to a compatible cutter body ensures correct cutting angles and clamping stability. Is this insert suitable for interrupted cuts? Yes, the combination of the WKP35S grade, Tiger‑tec Silver coating and a 0.8 mm corner radius supports robustness in interrupted cutting, offering a balance between edge strength and surface finish. Walter Tools is part of the Walter Group and is recognised for precision cutting tools that support high productivity and process reliability. Protected trademarks and product names are the property of their respective owners. The offered article is an original, factory-new product from the manufacturer.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com