200mm Digital Caliper Absolute Display 0.02mm Resolution IP54, Four-Point Measurement, Stainless Steel With Glass Slide Kitted - Metav IndustryLine

Take advantage of the combination of workshop-grade robustness, reliable data transfer and fine mechanical precision for consistent measurement results. The 200 mm measuring range, accuracy ±0.02 mm and IP54 protection make this caliper suitable for standard machine‑shop tasks; order the digital caliper directly via Metav Werkzeuge or ask our consultants if needed.

Digital Caliper M216.256 — 200 mm absolute caliper with IP54 by Metav IndustryLine

The Digital Caliper M216.256 is a 200 mm absolute digital caliper to DIN 862, designed for routine workshop and production measurements where repeatable precision and data output are required.

• Absolute measuring system with RB 6 data output
• IP54 protection for dusty and damp environments
• Four‑function measurement: internal/external/depth/step
• Stainless steel construction with glass scale

Reliable precision for everyday workshop control

The caliper delivers accuracy ±0.02 mm with a 0.02 mm reading, a combination that meets typical industrial quality‑control requirements for general mechanical engineering. With a 200 mm measuring range, the instrument falls into the Standard class, offering the best balance between reach and stiffness for routine workpieces such as shafts, housings and fixtures. The specification to DIN 862 provides a trustworthy reference for conformity and comparability in procurement decisions, while the absolute measuring principle avoids the need for repeated reference runs, reducing cycle time during serial checks.

Built to withstand workshop conditions and integrate with production data

Robustness is a core benefit: an IP54 rating and stainless steel with glass scale construction resist dust and splash exposure common in machining environments, so measurement remains dependable across shifts. The caliper uses an absolute measuring system, which keeps the reference position even after the instrument is powered down, and features data output RB 6 for direct connection to data loggers or statistical process control systems. The digital display includes ON/OFF, 0/ABS, mm/inch and Origin functions for straightforward operation, and a 3 V CR2032 battery powers the unit with a compact supply solution.

Versatile handling that speeds up inspection workflows

Ergonomic design and manageable mass (approx. 0.5 kg) permit steady one‑handed operation and precise jaw positioning. The device supports four‑function measurement — internal, external, depth and step — allowing a single tool to replace several specialised gauges and thus streamline bench setups. The caliper is operable with or without a drive roller, enhancing adaptability for different measurement techniques. Where traceability and digital logging matter, the integrated output simplifies data capture and reduces transcription errors, supporting lean workflows on the shop floor.

Choose the Metav IndustryLine digital caliper M216.256 for robust, workshop-ready measurement and contact Metav Werkzeuge for expert advice or to place an order via info@metav-werkzeuge.com or +49 2822 7131930

Technical Data

• SKU: M216.256
• GTIN: 4054469182568
• Label: Digital caliper 200 mm, IP54, DIN 862
• Manufacturer: Metav IndustryLine

Numbers / Core technical data

• Measuring range: 0–200 mm
• Reading / resolution: 0.02 mm
• Accuracy: ±0.02 mm
• Weight: 0.5 kg
• Battery: 3 V CR2032
• Protection class: IP54

Special features

• Material: stainless steel with glass scale
• Measuring system: absolute
• Digital display: ON/OFF, 0/ABS, mm/inch, Origin
• Data output: RB 6
• Four‑function measurement: internal, external, depth, step
• Norm: DIN 862
• Operable with or without drive roller

FAQ

What measurement tasks is this caliper best suited for? This caliper is intended for standard workshop and machine‑shop measurements; the Digital Caliper M216.256 (Metav IndustryLine) covers typical tasks on shafts, housings and assembly parts within its 200 mm range.

How does the absolute measuring system help in inspection routines? The absolute measuring system maintains the reference position after power‑off, so the M216.256 avoids repeated zeroing and speeds up serial checks while reducing operator steps.

Can measurement results be exported to a PC or data logger? Yes. The caliper provides a data output RB 6 interface that allows direct connection for digital logging and integration into SPC or measurement collection systems.

Which measurement functions are supported by the instrument? The tool supports four modes: internal, external, depth and step measurement; these functions make the caliper a versatile choice for diverse inspection needs.

Is the caliper suitable for use in a production environment with dust and coolant mist? The IP54 rating and durable stainless steel with glass scale make the Digital Caliper M216.256 suitable for dusty and splash‑prone workshop conditions.

Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com