1.25 mm Coating Thickness Gauge With Dual External Probes, Data Log 500, USB, In Carry Case - Metav IndustryLine
€986.00
Product information "1.25 mm Coating Thickness Gauge With Dual External Probes, Data Log 500, USB, In Carry Case - Metav IndustryLine"
Take advantage of a compact 0–1.25 mm measuring range combined with dual external probes and integrated data storage for reliable quality control; order the gauge directly via Metav Werkzeuge or consult our experts for integration advice.
M502.430 Coating Thickness Gauge – 0–1.25 mm, Dual Probes (Metav IndustryLine)
The M502.430 is a handheld coating thickness gauge for non‑destructive inspection of coatings on ferrous and non‑ferrous substrates, designed for workshop and production‑line quality assurance.
- Measuring range 0–1.25 mm
- Dual external probes F1 and N1
- 500‑value data memory
- USB data output for transfer
Precise measurement performance to reduce rework and downtime
The instrument delivers a measuring range of 0–1.25 mm with a two‑step resolution specification: 0.1 µm up to 99.9 µm and 1 µm from 100 µm, which supports fine control of thin coatings and routine industrial layers alike. The internal data memory for 500 readings together with USB export ensures traceable measurement records that feed directly into quality documentation, reducing manual logging and the risk of transcription errors. The one‑ or two‑point calibration method allows rapid adjustment to reference plates, keeping measurement uncertainty low and compliance procedures efficient.
Flexible probe options and accessory set for varied surfaces
Equipped with two external probes (F1 and N1), the device adapts to both magnetic and non‑magnetic substrate measurements, making it suitable for coatings such as zinc, aluminium, chrome, copper, rubber, paint, plastic and anodising. The supplied accessory set—control plates plus aluminium and iron reference plates—enables quick on‑site checks and repeatable calibration. Measurement may be taken in single or serial mode to suit spot checks or batch inspections, so the gauge fits inspection benches, maintenance rounds and incoming goods checks without additional tooling.
Data handling and practical operation for consistent inspection workflows
Designed for everyday use, the gauge runs on 3×AA batteries and weighs approximately 2 kg, offering a balance between robustness and portability. The built‑in datastore and USB output expedite data transfer to spreadsheets or inspection software, supporting traceability in production and simplifying statistical process control. Clear numeric readout and straightforward calibration reduce operator dependency and contribute to reproducible results, while the compact form factor makes integration with existing metrology stations straightforward.
Discuss suitability for your production environment with Metav Werkzeuge in Emmerich — request detailed specifications or a datasheet via info@metav-werkzeuge.com or call +49 2822 7131930
Technical data
- SKU: M502.430
- GTIN: 4054469162560
- Manufacturer: Metav IndustryLine
Facts
- Measuring range: 0–1.25 mm
- Resolution: 0.1 µm (up to 99.9 µm); 1 µm (from 100 µm)
- Data memory: 500 values
- Data output: USB
- Power: 3×AA
- Weight: 2 kg
- Customs tariff number: 90178000
Special features
- Dual external probes: F1, N1
- Accessories included: 1× F1 probe, 1× N1 probe, 4× control plates, 1× aluminium plate, 1× iron plate
- Measurement modes: single, serial
- Calibration: one‑point or two‑point method
- Suitable for coatings on zinc, aluminium, chrome, copper, rubber, paint, plastic, anodising
FAQ
What is the measuring range of the gauge?
The M502.430 measures coatings from 0 to 1.25 mm, suitable for thin films up to substantial industrial layers.
How accurate is the device for thin coatings?
Resolution is 0.1 µm up to 99.9 µm and 1 µm from 100 µm; this combination supports precise control of thin and medium thickness coatings.
Which substrates can be measured?
The instrument supports coatings on ferrous and non‑ferrous substrates including zinc, aluminium, chrome, copper, rubber, paint, plastic and anodised surfaces.
Are the probes interchangeable for different measurement tasks?
Yes; the gauge includes F1 and N1 external probes that adapt to magnetic and eddy‑current measurement principles for different substrate types.
How is measurement data exported for QA records?
Stored readings (up to 500 values) can be exported via the USB data output for transfer into inspection software or spreadsheets.
What calibration options are available?
Calibration is performed using a one‑point or two‑point method with the supplied control plates to ensure repeatability and traceability.
Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
| Designation: | Schichtdickenmessgerät |
|---|
Passende Sonden
Take advantage of precise, repeatable coating thickness readings on both ferrous and non‑ferrous substrates combined with flexible handling thanks to an approximate 1 m cable; order directly via Metav Werkzeuge or consult the specialists for application advice. Probe F1 — Coating thickness probe for ferrous and non‑ferrous substrates (Metav IndustryLine) The Probe F1 is a single‑sensor probe designed for use with coating thickness gauges to measure layers on magnetic bases and non‑magnetic coatings, offering reliable readings where coated surfaces are sufficiently large or thick for stable measurement. Ferrous and non‑ferrous compatible probe Approx. 1 m cable for flexible positioning Suitable for Ø ≥30 mm or coating >100 μm Robust construction for industrial use Consistent thickness measurement where it matters The probe delivers repeatable coating thickness readings on substrates that are magnetic (steel, iron, alloy, magnet) while evaluating non‑magnetic finish layers such as zinc, aluminium, chromium, copper, rubber and paint. By specifying the minimum measurement footprint (area ≥ Ø30 mm) and a minimum coating thickness (> 100 μm), the sensor avoids unstable readings on very small or ultra‑thin test areas, which translates into fewer re‑tests and a clearer quality record. The result is more efficient quality control and faster decision cycles in production or laboratory environments. Built for practical integration and reliable handling Equipped with an approx. 1 m cable, this probe gives technicians the freedom to position measurement equipment without awkward strain on the device, improving ergonomics during batch inspections. The robust build suits routine industrial use and integrates with standard coating thickness gauges, allowing straightforward replacement or upgrade of existing sensors. Lightweight handling characteristics reduce operator fatigue during repeated measurements, while compatibility with standard instruments supports faster deployment on shop floors and in inspection stations. Data integrity and application-focused capability The sensor supports routine quality control by producing coherent and comparable data across similar test pieces; this makes it well suited to production monitoring and incoming inspection tasks. The probe design prioritises contact stability on larger surface areas and thicker coatings, ensuring that readings reflect the true layer thickness rather than artefacts from edge effects or uneven substrates. Clear specification of suitable materials and measurement conditions helps planners integrate the probe into inspection routines with predictable outcomes. Discuss application requirements with Metav Werkzeuge to confirm compatibility and secure the Metav IndustryLine Probe F1 (M502.431) — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M502.431 GTIN: 4054469162591 Tariff number: 90179000 Type: Probe F1 Category: Coating thickness gauge accessory Facts Weight: 2 kg Cable length: approx. 1 m Minimum measurement area: Ø ≥ 30 mm Minimum coating thickness for reliable reading: > 100 μm Special features Compatible substrates: steel, iron, alloy, magnet Suitable coating materials: zinc, aluminium, chromium, copper, rubber, paint Designed for industrial inspection and workshop use FAQ What substrates can this probe measure reliably? The Probe F1 (Metav IndustryLine probe, M502.431) is suitable for magnetic bases such as steel, iron and alloys while measuring non‑magnetic coatings including zinc, aluminium, chromium, copper, rubber and paint. Does the probe require a minimum test area or coating thickness? Yes — the Probe F1 performs reliably on areas with a diameter of at least Ø 30 mm or when the coating thickness exceeds 100 μm, which avoids edge effects and unstable contacts. What is the cable length provided with this probe? The Probe F1 is supplied with an approximate 1 m cable, allowing flexible positioning during inspection and convenient connection to standard coating thickness gauges. Can this probe be used in production quality control? The probe is designed for routine inspection and production monitoring; its stable contact on sufficiently large and thick coatings supports repeatable measurements useful for quality control processes. Is the Probe F1 compatible with existing coating thickness gauges? The probe is intended as an accessory for coating thickness gauges and will integrate with instruments designed for ferrous and non‑ferrous measurements; please verify connector and instrument compatibility where required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Take advantage of precise measurement on non‑ferrous substrates, a robust ≈1 m cable connection and clear limits for chrome‑plated copper coatings (up to 40 µm) to ensure reliable surface‑layer inspection in production. Order the probe directly via Metav Werkzeuge or consult the technical team for application advice. Sonde N1 – Probe for coating thickness gauges by Metav IndustryLine, suitable for non‑ferrous substrates and non‑metal coatings The Sonde N1 is a dedicated probe designed to measure coating thickness on non‑ferrous metal bases and non‑metallic coatings, ideal for workshop and production environments. Probe for non‑ferrous substrates Cable length approx. 1 m Measures coatings thicker than 10 µm Chrome‑plated copper valid up to 40 µm Consistent results on non‑ferrous substrates The probe delivers reliable coating thickness measurement where substrates are non‑ferrous metals such as copper, aluminium, zinc and tin, and where coatings are non‑metallic (plastics, rubber, paint, anodisation). Measurements require a coated area larger than Ø 10 mm or a coating thickness greater than 10 µm, which ensures the sensor sees a representative surface and reduces edge‑effect errors. Where chrome on copper is present, the probe maintains correct readings for coatings up to 40 µm, clarifying practical limits during process control and quality checks. Robust connection and easy integration for production A cable length of approximately 1 m provides practical reach at test stations without excess slack, and the probe’s compact sensor tip supports repeated in‑line checks. The physical design balances ease of handling with durability for routine use in maintenance and inspection workflows. Measurable attributes such as weight (2 kg) and the probe’s tariff code help planners and logistics teams include the item in documentation and procurement lists without uncertainty. Built for workshop and series inspection Intended for use with coating thickness gauges in the category of Schichtdickenmessgerät, the probe is suitable for production sampling, acceptance testing and spot checks during assembly. The clear specification of applicable substrates and coatings supports decision making in tool selection and process planning. Supplied information like GTIN 4054469162607 and the article SKU M502.432 simplifies inventory management and traceability in regulated environments. Contact Metav Werkzeuge today to confirm suitability for specific gauges and production tasks, or to request further technical details and procurement assistance from the Metav consultants. Technical data SKU: M502.432 GTIN: 4054469162607 Type: Sonde N1 Tariff code: 90179000 Manufacturer: Metav IndustryLine Facts Cable length: approx. 1 m Weight: 2 kg Special features Suitable for substrates: copper, aluminium, zinc, tin Compatible coatings: plastics, rubber, paint, anodisation Minimum coated area: > Ø 10 mm Minimum coating thickness for measurement: > 10 µm Chrome on copper: measurement valid up to 40 µm Category: Schichtdickenmessgerät eClass: 21170346 FAQ Which substrates can be measured with this probe? The Sonde N1 measures coatings on non‑ferrous metals such as copper, aluminium, zinc and tin, and on non‑metal coatings including plastics, rubber, paint and anodisation. What are the measurement limits for small parts or thin coatings? For reliable readings the coated surface should exceed Ø 10 mm or the coating thickness should be greater than 10 µm; chrome‑plated copper may be measured correctly only up to 40 µm. Is the Sonde N1 suitable for production sampling? Yes, the probe is designed for workshop and production use with a robust cable and handling characteristics suitable for repeated spot checks and sampling. How is the product identified for procurement and inventory? The probe is listed as SKU M502.432 with GTIN 4054469162607 and tariff code 90179000 for straightforward ordering and stock management. Can the probe be used with any coating thickness gauge? The probe is intended for coating thickness gauges that support non‑ferrous substrate probes; compatibility should be verified against the gauge’s input and probe specifications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com