F1 Probe 1m Cable Coating Thickness Gauge For Ferrous And Non‑Ferrous Substrates - Metav IndustryLine

Take advantage of a compact 0–1.25 mm measuring range combined with dual external probes and integrated data storage for reliable quality control; order the gauge directly via Metav Werkzeuge or consult our experts for integration advice. M502.430 Coating Thickness Gauge – 0–1.25 mm, Dual Probes (Metav IndustryLine) The M502.430 is a handheld coating thickness gauge for non‑destructive inspection of coatings on ferrous and non‑ferrous substrates, designed for workshop and production‑line quality assurance. Measuring range 0–1.25 mm Dual external probes F1 and N1 500‑value data memory USB data output for transfer Precise measurement performance to reduce rework and downtime The instrument delivers a measuring range of 0–1.25 mm with a two‑step resolution specification: 0.1 µm up to 99.9 µm and 1 µm from 100 µm, which supports fine control of thin coatings and routine industrial layers alike. The internal data memory for 500 readings together with USB export ensures traceable measurement records that feed directly into quality documentation, reducing manual logging and the risk of transcription errors. The one‑ or two‑point calibration method allows rapid adjustment to reference plates, keeping measurement uncertainty low and compliance procedures efficient. Flexible probe options and accessory set for varied surfaces Equipped with two external probes (F1 and N1), the device adapts to both magnetic and non‑magnetic substrate measurements, making it suitable for coatings such as zinc, aluminium, chrome, copper, rubber, paint, plastic and anodising. The supplied accessory set—control plates plus aluminium and iron reference plates—enables quick on‑site checks and repeatable calibration. Measurement may be taken in single or serial mode to suit spot checks or batch inspections, so the gauge fits inspection benches, maintenance rounds and incoming goods checks without additional tooling. Data handling and practical operation for consistent inspection workflows Designed for everyday use, the gauge runs on 3×AA batteries and weighs approximately 2 kg, offering a balance between robustness and portability. The built‑in datastore and USB output expedite data transfer to spreadsheets or inspection software, supporting traceability in production and simplifying statistical process control. Clear numeric readout and straightforward calibration reduce operator dependency and contribute to reproducible results, while the compact form factor makes integration with existing metrology stations straightforward. Discuss suitability for your production environment with Metav Werkzeuge in Emmerich — request detailed specifications or a datasheet via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M502.430 GTIN: 4054469162560 Manufacturer: Metav IndustryLine Facts Measuring range: 0–1.25 mm Resolution: 0.1 µm (up to 99.9 µm); 1 µm (from 100 µm) Data memory: 500 values Data output: USB Power: 3×AA Weight: 2 kg Customs tariff number: 90178000 Special features Dual external probes: F1, N1 Accessories included: 1× F1 probe, 1× N1 probe, 4× control plates, 1× aluminium plate, 1× iron plate Measurement modes: single, serial Calibration: one‑point or two‑point method Suitable for coatings on zinc, aluminium, chrome, copper, rubber, paint, plastic, anodising FAQ What is the measuring range of the gauge? The M502.430 measures coatings from 0 to 1.25 mm, suitable for thin films up to substantial industrial layers. How accurate is the device for thin coatings? Resolution is 0.1 µm up to 99.9 µm and 1 µm from 100 µm; this combination supports precise control of thin and medium thickness coatings. Which substrates can be measured? The instrument supports coatings on ferrous and non‑ferrous substrates including zinc, aluminium, chrome, copper, rubber, paint, plastic and anodised surfaces. Are the probes interchangeable for different measurement tasks? Yes; the gauge includes F1 and N1 external probes that adapt to magnetic and eddy‑current measurement principles for different substrate types. How is measurement data exported for QA records? Stored readings (up to 500 values) can be exported via the USB data output for transfer into inspection software or spreadsheets. What calibration options are available? Calibration is performed using a one‑point or two‑point method with the supplied control plates to ensure repeatability and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise, repeatable thickness measurement combined with modern data transfer and a robust transport case to speed up inspection routines and reduce paperwork. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Coating Thickness Gauge 0–1.25 mm, USB+Wi‑Fi incl. two probes — Metav IndustryLine Coating Thickness Gauge 0–1.25 mm, USB+Wi‑Fi incl. two probes is a compact portable instrument for non‑destructive thickness measurement of metallic and non‑metallic coatings, designed for workshop inspection and quality control tasks Wide measurement range 0–1.25 mm USB and Wi‑Fi data output 500-value internal data memory Includes two external probes F1 and N1 Precise measurement for consistent quality assurance The Coating Thickness Gauge 0–1.25 mm, USB+Wi‑Fi incl. two probes delivers a broad measuring span that covers thin films up to heavy coatings, making it suitable for repeatable quality checks. The instrument reads with a fine resolution (0.1 µm up to 99.9 µm, then 1 µm from 100 µm), which allows reliable discrimination of thin layers while remaining practical for thicker finishes. Built‑in calibration via one‑ or two‑point procedures and the supplied control plates make traceable measurements straightforward; this supports routine quality control and helps document conformity without lengthy setup. Faster workflows through integrated data transfer and storage Data handling is simplified by USB and Wi‑Fi output plus an internal store for 500 readings, enabling fast transfer to inspection software or a central database. The device supports both single measurement mode for spot checks and serial mode for continuous logging during panel scans, reducing manual entry and accelerating reporting. Powered by standard 3×AA cells and weighing about 2 kg, the unit balances portability with endurance: battery replacement is immediate on the shop floor and the low‑weight design eases handheld operation during extended inspections. Built for the workshop — rugged transport and versatile probes The gauge is supplied with two external probes F1 and N1, a set of four control plates, an aluminium plate and an iron plate, and is delivered in a protective storage case suitable for transport and on‑site use. This accessory package supports rapid verification and switching between ferrous and non‑ferrous applications, helping to avoid downtime. The robust housing and practical carrying case reduce the risk of damage in daily workshop conditions and make routine checks feel more efficient and secure. Where this tester proves its value This measuring instrument is ideal for paintshops, metal finishing lines and maintenance inspections where coatings such as zinc, aluminium, chrome, copper, rubber, paint, plastic and anodising must be monitored. The combination of a wide measuring range, accurate resolution and fast data export supports both spot checks on finished parts and regular batch control. Simple calibration routines and included reference plates mean the device can be commissioned quickly in production environments and integrated into existing quality processes. Contact Metav Werkzeuge for tailored application advice and secure a Metav IndustryLine coating thickness gauge with USB and Wi‑Fi for immediate integration into your inspection routine. Technical data SKU: M502.433 GTIN: 4054469182735 Measurement range: 0–1.25 mm Resolution: 0.1 µm (to 99.9 µm), 1 µm (from 100 µm) Data output: USB+Wi‑Fi Memory: 500 measurements Power supply: 3×AA batteries Weight: 2 kg Measuring modes: single, serial Calibration: one‑point or two‑point method Accessories included: Probe F1, Probe N1, 4× control plates, 1× aluminium plate, 1× iron plate Delivery: transport/storage case Core figures Measurement range (numeric): 0–1.25 mm Memory capacity: 500 values Weight (numeric): 2 kg Power: 3×AA Number of probes: 2 Special features Two external probes F1 and N1 USB and Wi‑Fi data transfer Internal data storage for 500 measurements Control plates and metal reference plates included Transport/storage case supplied Single and serial measurement modes One‑ or two‑point calibration procedure FAQ What materials can be measured with this gauge? The gauge measures coating thickness on a wide range of finishes; typical applications include zinc, aluminium, chrome, copper, rubber, paint, plastic and anodising, as supplied in the product description. How is data exported from the instrument? Data can be exported via USB or Wi‑Fi from the device; the built‑in memory for 500 readings enables batch transfer or incremental uploads to inspection software. Are reference standards included for calibration? Yes. The delivery contains four control plates plus an aluminium plate and an iron plate to perform on‑site one‑ or two‑point calibration routines. What are the measuring modes and when should they be used? Both single and serial measurement modes are supported. Use single mode for individual spot checks and serial mode for continuous logging during panel scans or repetitive inspections. What power source does the instrument use and how portable is it? The unit runs on standard 3×AA batteries and weighs approximately 2 kg, combining portability with practical operating time for routine checks. Which probes are supplied and what is their purpose? Two external probes, F1 and N1, are included to cover different substrate types and application scenarios; they facilitate rapid switching between ferrous and non‑ferrous measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com