1000mm Digital Precision Caliper 300mm Jaw Length, Carbon Fibre With Steel Measuring Faces, IP65 - Filetta

Streamline measurement workflows with the combination of fast digital data transfer and seamless compatibility with Metav carbon calipers. The USB interface converts caliper readings into a direct digital stream, reducing transcription errors and accelerating documentation. Order the accessory directly via Metav Werkzeuge or consult the Metav team for application advice. USB Interface for Carbon Workshop Calipers M909.686 — direct USB connection, compatible with M910.342–M910.353 (Metav IndustryLine) The USB Interface for Carbon Workshop Calipers provides a compact bridge between workshop calipers and digital systems, designed to simplify data capture in production and quality control environments. Direct digital connection to measurement systems Compatible with M910.342–M910.353 calipers Compact format for workshop integration Reduces manual transcription and recording time Faster, more reliable measurement capture for production A direct digital connection removes manual transcription from the measurement loop, delivering consistent results and faster documentation. The USB interface converts analogue caliper signals into a digital data stream that can be imported into spreadsheets and quality software, improving data integrity and enabling quicker decision-making on the shop floor. This leads to measurable time savings in routine inspection tasks and a lower risk of human error. Integrates with existing data workflows and QA systems Designed to fit into current measurement procedures, the adapter supports direct logging and straightforward data handling. By enabling direct data logging into standard applications, the interface simplifies traceability and archiving of measurement results. The reduced administrative overhead supports leaner processes and a clearer audit trail for quality assurance, helping teams maintain consistent production standards. Practical compatibility and workshop suitability Compatibility is specified for Carbon workshop calipers M910.342–M910.353, ensuring immediate interoperability with those models. The interface is intended as a functional accessory for the measurement toolchain, enabling fast transfer of readings to a PC or data-collection device. Clear compatibility reduces integration effort and avoids unexpected adaptation work during commissioning. Built for usability and dependable supply The solution emphasises practical usability: simple connections, predictable data export and a discrete form factor that does not intrude on routine measurement tasks. Sourcing through Metav IndustryLine offers the reassurance of a European distribution and quality filter located in Emmerich, where product checks and logistics are coordinated to support reliable delivery into the workshop environment. For measurement setups that demand efficient digital capture, consider the Metav IndustryLine USB Interface M909.686 — contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M909.686 Name: USB Interface for Carbon Workshop Calipers Compatible with: Carbon workshop calipers M910.342–M910.353 Manufacturer: Metav IndustryLine Facts Interface: USB SKU: M909.686 Special features Digital connection for calipers Compact accessory for workshop use FAQ Is the interface compatible with other caliper models? Compatibility is specified for the Carbon workshop calipers M910.342–M910.353; use with other models may require verification of signal compatibility. How are readings transferred to a computer? Readings are transmitted via the USB connection as a digital data stream suitable for import into measurement software or spreadsheets. Does the USB interface affect caliper calibration? The interface does not change the calibration status of the caliper. Calibration remains a property of the measuring instrument and must be maintained according to the caliper manufacturer’s guidance. Which software is required to receive the data? The interface supplies standard digital output; many measurement and data-logging programmes or spreadsheet applications accept this input. Specific software compatibility should be checked with the intended system. What is the article number and who supplies the product? The article number is M909.686 and the product is supplied under the Metav IndustryLine brand. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of seamless measurement control and reliable workshop use: the compact Footswitch for USB interface provides straightforward data capture and stable operation with precision instruments; order directly via Metav Werkzeuge or request advice from our consultants for integration with existing equipment. Footswitch for USB interface – momentary control pedal for data capture The Footswitch for USB interface is a compact control pedal designed to trigger measurement capture via the USB interface M909.686, ideal for use alongside precision calipers and other bench‑top metrology gear in workshop and inspection environments. Compatible with USB interface M909.686 Sturdy pedal for industrial use Plug-and-play operation via USB Non-slip base for secure positioning Integrates measurement workflows for faster data capture The pedal provides a simple, repeatable way to record readings from calipers and other instruments that use a USB interface, reducing hand‑to‑hand interruptions and improving cycle times. With direct compatibility with the USB interface M909.686, the control pedal converts a foot action into an immediate, single‑function input for measurement transfer; this keeps the operator’s hands free for repositioning or fixturing and supports a steady, efficient workflow in production and quality control. The result is smoother process integration and fewer entry errors during high‑volume checks. Built for dependable workshop operation and repeatability A mechanical design focused on robustness and repeatability ensures consistent actuation under frequent use in industrial environments. The pedal’s non-slip base secures placement on workbenches and prevents movement during operation, which helps maintain measurement consistency over long shifts. This stability, combined with straightforward hardware compatibility, contributes directly to reproducible measurement routines and reduces downtime caused by handling interruptions. Simple installation and clear functional purpose Installation is intentionally minimal: the pedal functions as a dedicated input device for a paired USB interface and requires no special drivers for standard setups, offering a plug-and-play experience in many environments. The clear, singular function of the control pedal makes it easy to integrate into existing procedures for precision calipers and other USB‑enabled measuring tools, keeping operator training brief while preserving process control and documentation disciplines. Contact Metav Werkzeuge to confirm compatibility with existing instruments and to request the M909.687 for direct delivery from Emmerich; technical consultants are available for integration guidance Technical data Article number: M909.687 Product: Footswitch for USB interface Compatible with: USB interface M909.686 Manufacturer: Metav IndustryLine Core technical data Weight: not specified Dimensions: not specified Electrical specification: not specified Special features Function: momentary foot switch for measurement/data capture Application: for use with precision calipers and USB measurement interfaces Asset: m909687-main.jpg (image file available) FAQ How is the footswitch connected to measurement equipment? The footswitch connects via the paired USB interface M909.686 and acts as a momentary input to transfer or register measurements from compatible devices. Can the pedal be used with standard precision calipers? Yes. When combined with the appropriate USB interface, the pedal supports typical precision caliper workflows for hands‑free measurement capture. Is any special software required to use the footswitch? In most setups the pedal functions as a simple input through the USB interface M909.686; specific software requirements depend on the measuring device and the data capture application. What environments is the footswitch suitable for? The product is intended for workshop and inspection areas where repeatable, hands‑free measurement entry improves efficiency and safety. Which SKU identifies this footswitch? The product is supplied as SKU M909.687 and is listed under the Metav IndustryLine range for measurement accessories. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the wireless connection and straightforward USB interface to streamline measurement data capture, combined with direct compatibility with the Carbon workshop calipers M910.342–M910.353 for faster, error‑reduced documentation; order the receiver directly via Metav Werkzeuge or contact the consultants for configuration support. Wireless USB Receiver M910.038 — Wireless data interface for carbon workshop calipers (Metav IndustryLine) The Wireless USB Receiver M910.038 is a compact data interface designed to receive measurement signals from compatible Carbon workshop calipers and relay them to a PC via a standard USB connection. Wireless data transfer for calipers USB plug-and-play connection Compatible with Carbon workshop calipers Improve data workflows with reliable wireless transfer The receiver turns manual read‑offs into a digital, traceable process by capturing measurement values from compatible calipers and making them available at the workstation. With a focus on efficient data handling, the unit facilitates smoother documentation and reduces transcription errors that typically occur when measurements are recorded by hand. The emphasis on a simple USB interface keeps integration straightforward: connect the USB receiver to a workstation and the measurement stream is ready for logging or spreadsheet capture. This brings a clear productivity gain for repetitive quality checks and batch inspections in workshop environments. Compact interface that fits standard measurement setups Designed as an accessory for Carbon workshop calipers M910.342–M910.353, the receiver provides an unobtrusive addition to existing metrology benches. The compact form factor preserves valuable bench space and allows for flexible placement close to the measuring area. Because the device is dedicated to caliper data reception, it complements analogue and digital workflows without replacing established tools. The result is a practical bridge between hand‑held precision measurement and digital quality documentation, enabling faster reporting cycles and better traceability. Practical compatibility and straightforward integration Compatibility with the specified Carbon workshop calipers ensures a predictable connection between measuring instruments and the PC environment. The receiver’s role is to accept the caliper’s measurement transmissions and present them via the USB interface to common data capture applications. This approach reduces manual input and supports standard quality control routines used in machine shops and production facilities. The compatibility focus simplifies procurement and avoids the complexity of multi‑protocol gateways, so the accessory becomes a dependable part of the measuring routine. Built for workshop conditions and everyday use As an accessory intended for industrial metrology support, the device is engineered to sit within typical workshop workflows: easy to mount, easy to connect, and simple to operate. The emphasis on robust, repeatable data transfer aligns with the need for reliable documentation in production and maintenance tasks. By converting measurement signals into a digital form at the bench, the receiver helps teams maintain consistent records and accelerates downstream processes such as SPC logging or CAD data entry. Contact Metav Werkzeuge today for product availability and advice on integrating the M910.038 with Carbon workshop calipers or to request ordering details from our Emmerich distribution centre Technical Data Article number: M910.038 Name: Wireless USB receiver Compatible with: Carbon workshop calipers M910.342–M910.353 Manufacturer: Metav IndustryLine Core data Interface: USB Label: Drahtloser USB-Empfänger Asset image file: m910038-main.jpg Special features Wireless reception for caliper measurement signals Plug-and-play USB connection for PC integration Accessory for Carbon workshop calipers M910.342–M910.353 FAQ How does the receiver connect to the measuring equipment? The receiver accepts wireless measurement signals from the specified Carbon workshop calipers and forwards the values to a PC via its USB interface, enabling digital capture of measurements from the instruments. Which calipers are supported by this receiver? Compatibility is stated for the Carbon workshop calipers M910.342–M910.353; the receiver is intended as the data interface for those models. Is special software required to read the measurements? Measurement data from the receiver is provided through the USB connection and can be integrated into standard data capture or spreadsheet applications; specific integration steps depend on the chosen software environment. Can the receiver be used in a production environment? Yes. The unit is designed as a workshop accessory to support routine measurement tasks and digital documentation workflows alongside hand‑held calipers. What should be considered when placing the receiver in the workshop? Position the receiver so it maintains a clear link to the paired calipers and a reliable USB connection to the workstation; exact placement will depend on bench layout and signal obstacles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of reliable wireless data transfer and straightforward compatibility with Carbon workshop calipers M910.342–M910.353 to remove manual entry and speed up inspection cycles; the compact design keeps the measuring jaws unobstructed while enabling a continuous digital workflow. Order or enquire via Metav Werkzeuge for fast dispatch and expert advice. Wireless Transmitter M910.039 — Wireless data module for workshop calipers (Metav IndustryLine) Wireless Transmitter M910.039 is a compact data module that links compatible carbon workshop calipers to digital measuring systems for streamlined data collection and reduced transcription errors Compact wireless module for workshop calipers Plug-and-play data transfer to measuring systems Compatible with Carbon workshop calipers M910.342–M910.353 Low-profile form that preserves measurement access Speed up measurement workflows with secure wireless transfer The M910.039 enables fast, machine-readable data capture from compatible calipers, eliminating repetitive manual recording and the associated sources of human error. By providing wireless data transfer from the measuring instrument to compatible receivers and software, the module shortens inspection loops and supports a more efficient production rhythm. This results in measurable time savings during batch checks and quality control, while maintaining the traceability expected in modern workshops. Improve traceability and quality control without extra complexity Integration of a transmitter offers clear benefits for documentation and auditability: recorded values can be routed directly into measurement logs and digital reports, improving traceability and reducing rework caused by transcription mistakes. The low-profile design preserves full access to the caliper jaws during routine tasks, so measuring performance is not compromised. The module is intended as a practical addition for workshop environments that demand consistent, verifiable data flow rather than manual note-taking. Simple compatibility and workshop-ready reliability Designed as an accessory for the Carbon workshop calipers M910.342–M910.353, the transmitter supports straightforward attachment and operation alongside standard measuring procedures. As a product from Metav IndustryLine, it benefits from distribution and quality control processes centred in Emmerich, ensuring reliable stocking and supply for industrial customers and independent workshops. For procurement or specification checks, the module can be ordered via Metav Werkzeuge or assessed with the sales documentation available from the supplier. For enquiries about fitting the Metav IndustryLine M910.039 or to confirm system compatibility, contact Metav Werkzeuge in Emmerich — info@metav-werkzeuge.com or +49 2822 7131930 — for tailored advice and prompt dispatch Technical data Article number: M910.039 Name: Wireless transmitter Label: Drahtloser Sender Compatible with: Carbon workshop calipers M910.342–M910.353 Brand: Metav IndustryLine Facts Image file size: 54310 bytes Image count: 1 Special features Wireless transmitter function indicated by product name Digital data output interface (as accessory for calipers) Product image available via asset FAQ What calipers is this transmitter compatible with? The transmitter is compatible with Carbon workshop calipers M910.342–M910.353 and is designed to work as an accessory to those models for wireless data transfer. Will the transmitter affect the measuring accuracy of the caliper? The transmitter itself serves only to relay measurement values; it does not alter the mechanical measuring function of the caliper. Accuracy remains defined by the caliper’s specifications. Is any special software required to receive the data? Data reception depends on the chosen receiver or measuring software; the transmitter provides a digital output for integration with compatible systems and data loggers. Can the transmitter be fitted and removed during routine work? The transmitter is intended as an add-on accessory for workshop use and can be fitted to the compatible caliper models to support standard measuring sequences. Does the transmitter replace manual documentation processes? When connected to a compatible receiving system, the transmitter enables automatic capture of measured values, reducing the need for manual documentation and lowering the risk of transcription errors. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com